SHE-SYSTEM-MIB

File: SHE-SYSTEM-MIB.mib (141739 bytes)

Imported modules

AN-MIB ENTITY-MIB SHE-ALARMING-MIB
SHE-TC-MIB SNMPv2-CONF SNMPv2-SMI
SNMPv2-TC

Imported symbols

she entPhysicalIndex PhysicalIndex
sheAlarmTimeAndDate sheAlarmReportingSource sheAlarmReportingSourceType
sheAlarmSeverity SheControlStatusType SheCardType
SheSystemFileIndexType OBJECT-GROUP MODULE-COMPLIANCE
NOTIFICATION-GROUP TimeTicks IpAddress
Integer32 Unsigned32 Gauge32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
DisplayString TruthValue TEXTUAL-CONVENTION

Defined Types

SheSystemMaintenanceControlReq  
INTEGER noRequest(1), setSystemMaintenanceBase(50), setSwmAdminState(51), swmUpgrStartRequest(100), swmUpgrStartRequestNoReset(101), swmReadSAPSContentFile(102), backupDb(200), refreshDbBackupFilesTable(201), dbReloadSpecificFile(202), setBackupPeriod(203), setLocalBackupAdminState(204), setRemoteBackupAdminState(205)    

SheSystemMaintenanceControlReqResult  
INTEGER noRequest(1), ftpIpAddrFailed(11), ftpAccountFailed(12), ftpPasswdFailed(13), ftpDescPathFailed(14), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), sucUpgrTaskCreationFault(51), sucUpgrDbAccessFault(52), sucUpgrMissParameter(54), sucAlreadyLoaded(55), sucOk(60), sucNotOk(61), sucDbAccessFailed(62), sucCardUnlocked(63), sucTransmissionError(64), sucWrongSwVersion(65), sucUnitTypeMismatch(66), sucFtpTransError(67), sucFtpCrcError(68), sucSwHwMismatch(69), sucUpgrWrongAvState(70), sucFepromCopyFault(71), sucUpdateDescFileFailed(72), sucFtpServerNoteAvailable(73), sucFtpSendError(74), sucDbBackupFault(75), sucUpgradeComplete(76), sucUpgradeNotComplete(77), sutInitialized(100), sutToDo(101), sutStarted(102), sutCrashed(103), sutFtpDone(104), sutDone(105), sutReadyForReset(106), sutObsolete(107), sutResetInProgress(108), localBackupOk(150), remoteBackupOk(151), localBackupFailed(152), remoteBackupFailed(153), flashAccessFailed(154), dbReadFailed(155), dbmLocalBackupOk(170), dbmRemoteBackupOk(171), dbmLocalBackupFailed(172), dbmRemoteBackupFailed(173), dbmFlashAccessFailed(174), dbmDbReadFailed(175), dbmLocalBackupFileFaulty(176), dbmRemoteBackupFileFaulty(177), dbmRestoreFailed(178), dbmRestoreOk(179), dbmRefreshFailed(180), dbmRefreshOk(181)    

SheSystemAdminState  
INTEGER unlocked(1), locked(2)    

SheSystemIpControlReqType  
INTEGER createSystemIpHost(50), deleteSystemIpHost(51), modifySystemIpHost(52), createSystemIpRoute(55), deleteSystemIpRoute(56), modifySystemIpRoute(57)    

SheSystemSwmCurrentStatusType  
INTEGER passive(1), started(2), active(3)    

SheSystemStartupType  
The startup type.
TEXTUAL-CONVENTION    
  INTEGER resetSystem(1), resetSystemWithDefault(2)  

SheSystemTmnConnectedType  
TMN Connected type.
TEXTUAL-CONVENTION    
  INTEGER connected(1), disconnected(2)  

SheSystemControlRequestType  
The type for system control commands.
TEXTUAL-CONVENTION    
  INTEGER configureTime(1), tmnConnect(2), tmnDisconnect(3), lctConnect(4), lctDisconnect(5), writeDatatoFlash(6), configureTimeZone(7), setCPUThreshold(8), setMemoryThreshold(9)  

SheSystemControlRequestResultType  
The result type for system control commands.
TEXTUAL-CONVENTION    
  INTEGER commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), featureNotSupportedbyRelease(41)  

SheSystemThresholdIntervalType  
The sampling interval for system threshold
TEXTUAL-CONVENTION    
  INTEGER sec5(1), sec60(2), sec600(3)  

SheSystemFileControlRequestType  
The type for file control commands.
TEXTUAL-CONVENTION    
  INTEGER upload(1), download(2), uploadCardsAllOfType(3), downloadCardsAllOfType(4), uploadAllOfSystem(5)  

SheSystemFileControlRequestResultType  
The result type for file control commands.
TEXTUAL-CONVENTION    
  INTEGER ftpError(10), ftpIpAddrFailed(11), ftpAccountFailed(12), ftpPasswdFailed(13), ftpDescPathFailed(14), swLoadPromotionFailed(20), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37)  

SheSystemTypeOfFile  
The type of files which can be managed.
TEXTUAL-CONVENTION    
  INTEGER storedLoad(1), errorLog(2), restoreFile(3), remoteInventory(4), performanceData(5), alarmLog(6), uptimeLog(7)  

SheSystemFileLoadStatusType  
The load status type.
TEXTUAL-CONVENTION    
  INTEGER finished(1), running(2), broken(3)  

SheSystemNtpClientControlRequestType  
The type for NtpClient control commands.
TEXTUAL-CONVENTION    
  INTEGER enableNtpClient(1), disableNtpClient(2), changeNtpClientXmitInterval(3), addNtpClientServerName(4), deleteNtpClientServerName(5)  

SheSystemNtpClientControlRequestResultType  
The result type for file control commands.
TEXTUAL-CONVENTION    
  INTEGER noRequest(1), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), ntpClientEnableErr(50), ntpClientDisableErr(51), ntpClientChangeXmitIntervalErr(52), ntpClientServerNameAddErr(53), ntpClientServerNameDelErr(54)  

SheSystemDnsServerControlRequestType  
The type for DNS Server control commands.
TEXTUAL-CONVENTION    
  INTEGER addedDnsServerName(1), deletedDnsServerName(2)  

SheSystemDnsServerControlRequestResultType  
The result type for file control commands.
TEXTUAL-CONVENTION    
  INTEGER noRequest(1), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), dnsServerIpAddErr(60), dnsServerIpDelErr(61)  

SheSystemManagementSessionType  
Management Session Type.
TEXTUAL-CONVENTION    
  INTEGER telnet(1), snmp(2), ssh(3)  

SheSystemManagementSessionControlRequestType  
Management Session global user commands.
TEXTUAL-CONVENTION    
  INTEGER setSnmpSessionAgingTime(1)  

SheSystemManagementSessionControlReqResultType  
The result type for Management Session control commands.
TEXTUAL-CONVENTION    
  INTEGER noRequest(1), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), setAgingTimeFailed(60)  

SheSystemConfigLogControlRequestType  
Config Log control commands.
TEXTUAL-CONVENTION    
  INTEGER setConfigLogEntryNumber(1), setFtpAccount(2), setFtpInterval(3)  

SheSystemAutoConfigBackupControlRequest  
AutoConfig Backup control commands.
TEXTUAL-CONVENTION    
  INTEGER setAutoConfigBackupEnabled(1), setFtpAccount(2), setBackupTimerval(3)  

SheSystemLoadType  
The load type.
TEXTUAL-CONVENTION    
  INTEGER active(1), passive(2)  

SheSystemStartupResultType  
Result of the last NE startup.
TEXTUAL-CONVENTION    
  INTEGER startupInProgress(1), startupFailed(2), startupFinished(3)  

SheSystemIpHostUseDhcpType  
Either use DHCP or fixed IP address.
TEXTUAL-CONVENTION    
  INTEGER noUseDhcp(0), useDhcp(1)  

SheSystemFeatureCapabilityEntry  
SEQUENCE    
  sheSystemFeatureIndex Unsigned32
  sheSystemFeatureName DisplayString

SheSystemFileSwFileEntry  
SEQUENCE    
  sheSystemFileSwfIndex SheSystemFileIndexType
  sheSystemFileSwfFileName OCTET STRING
  sheSystemFileSwfTypeOfFile SheSystemTypeOfFile
  sheSystemFileSwfVersion OCTET STRING
  sheSystemFileSwfSize Integer32
  sheSystemFileSwfTimeStamp Unsigned32

SheSystemNtpClientServerEntry  
SEQUENCE    
  sheSystemNtpClientServerIndex Integer32
  sheSystemNtpClientServerName OCTET STRING

SheSystemDnsServerEntry  
SEQUENCE    
  sheSystemDnsServerIndex Integer32
  sheSystemDnsServerAddr OCTET STRING

SheSystemManagementSessionEntry  
SEQUENCE    
  sheSystemManagementSessionIndex Integer32
  sheSystemManagementSessionType SheSystemManagementSessionType
  sheSystemManagementSessionSnmpExpiredTime Integer32
  sheSystemManagementSessionAddress IpAddress

SheSystemSwMaintenanceTaskEntry  
SEQUENCE    
  sheSystemSwmTIndex Unsigned32
  sheSystemSwmTCardType SheCardType
  sheSystemSwmTEntPhysicalIndex PhysicalIndex
  sheSystemSwmTTimeStamp Unsigned32
  sheSystemSwmTUpgradeState SheSystemMaintenanceControlReqResult
  sheSystemSwmTUpgradeResult SheSystemMaintenanceControlReqResult
  sheSystemSwmTSwVersion OCTET STRING
  sheSystemSwmTSwVersionNeed OCTET STRING

SheSystemDbBackupFilesEntry  
SEQUENCE    
  sheSystemDbBackupFileIndex Unsigned32
  sheSystemDbBackupFileName DisplayString
  sheSystemDbBackupFileTimeStamp Unsigned32

SheSystemIpHostEntry  
SEQUENCE    
  sheSystemIpHostIndex Unsigned32
  sheSystemIpHostName DisplayString
  sheSystemIpHostUseDhcp SheSystemIpHostUseDhcpType
  sheSystemIpHostIpAddress IpAddress
  sheSystemIpHostSubnetMask IpAddress
  sheSystemIpHostOuterVlanId Unsigned32
  sheSystemIpHostInnerVlanId Unsigned32
  sheSystemIpHostDescription OCTET STRING
  sheSystemIpHostOuterVlanPriority Unsigned32
  sheSystemIpHostInnerVlanPriority Unsigned32

SheSystemIpRouteEntry  
SEQUENCE    
  sheSystemIpRouteIndex Unsigned32
  sheSystemIpRouteName DisplayString
  sheSystemIpRouteDestIpAddress IpAddress
  sheSystemIpRouteSubnetMask IpAddress
  sheSystemIpRouteGatewayIpAddress IpAddress
  sheSystemIpRouteMetric Integer32

Defined Values

sheSystem 1.3.6.1.4.1.231.7.1.2.1.2
Definition of system global information and configuration, e.g. configuration of external time, snmp configuration file management for up and download of - loads, - configuration files - errorlog - remote inventory - performance data file - snmp configuration file
MODULE-IDENTITY    

sheSystemInfo 1.3.6.1.4.1.231.7.1.2.1.2.1
OBJECT IDENTIFIER    

sheSystemVersion 1.3.6.1.4.1.231.7.1.2.1.2.1.1
Contains the version of the net element. The selected version depending on the used CXU SW release and detected shelf type of the running NE!! hiX5625/R2.5 hiX5630/R2.5 hiX5635/R2.5 hiX5625/R2.5.1 hiX5630/R2.5.1 hiX5635/R2.5.1 hiX5625/R2.6 hiX5630/R2.6 hiX5635/R2.6 hiX5625/R2.7 hiX5630/R2.7 hiX5635/R2.7 hiX5625/R2.8 hiX5630/R2.8 hiX5635/R2.8 hiX5625/R2.6S2 hiX5630/R2.6S2 hiX5635/R2.6S2 hiX5625/R2.7MH (support H248) hiX5630/R2.7MH (support H248) hiX5635/R2.7MH (support H248) hiX5625/R2.7MS (support SIP) hiX5630/R2.7MS (support SIP) hiX5635/R2.7MS (support SIP) hiX5625/R2.8M hiX5630/R2.8M hiX5635/R2.8M hiX5622/R2.8 hiX5608/R1.0 The used shelftype could be retrieved from shePhysShelfTable. Systemversion -> possible Shelftypes SHE hiX5635 -> M1200:E, M1100:E, G1100:E, G1100:B:E, G1100:A SHE hiX5630 -> M600:E, G600:E, G600:R:E, M600:DF:E SHE hiX5625 -> M400:E, G400:E, G400:R:A, SHE hiX5622 R1.0 -> MDUS:E (obsolete) SHE hiX5608 R1.0 -> empty string because no shelf is used, single box system Shelftype's 2 generation - only new 2G powermodules could be used! (>= with R2.8 maintenance) SHE hiX5635 -> G1100:2G:E, M1100:2G:E SHE hiX5630 -> G600:2G:E, G600:R:2G:E, SHE hiX5625 -> G400:2G:E, G400:R:2G:A, SHE hiX5622 -> G200:2G:E
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sheSystemExternalTime 1.3.6.1.4.1.231.7.1.2.1.2.1.2
The external time of the net element (UTC). The TMN-OS should set this time after first time power up or system resets and should refresh it once a day.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sheSystemStartupType 1.3.6.1.4.1.231.7.1.2.1.2.1.3
Startup type: 1..resetSystem 2..resetSystemWithDefault
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemStartupType  

sheSystemTmnConnected 1.3.6.1.4.1.231.7.1.2.1.2.1.4
The value connected indicates that a manager has received the trap sheSytemStartupEnd and has connected.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemTmnConnectedType  

sheSystemLctConnected 1.3.6.1.4.1.231.7.1.2.1.2.1.5
The value connected indicates that a manager has connected as LCT. SHE sends the trap sheSystemLctConnected to all known TMN systems to inform whether the LCT session has been setup or terminated.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemTmnConnectedType  

sheSystemFeatureCapabilityTable 1.3.6.1.4.1.231.7.1.2.1.2.1.6
The alarm severity table. The alarm severity table associates profile index and AlarmID pairs with severities to be used for alarm traps. (Note that this table does not apply to cleared alarms).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheSystemFeatureCapabilityEntry

sheSystemFeatureCapabilityEntry 1.3.6.1.4.1.231.7.1.2.1.2.1.6.1
Entry of the sheSystemFeatureCapabilityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheSystemFeatureCapabilityEntry  

sheSystemFeatureIndex 1.3.6.1.4.1.231.7.1.2.1.2.1.6.1.1
The system feature index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sheSystemFeatureName 1.3.6.1.4.1.231.7.1.2.1.2.1.6.1.2
The system feature name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sheSystemControl 1.3.6.1.4.1.231.7.1.2.1.2.1.7
OBJECT IDENTIFIER    

sheSystemControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.1.7.1
System commands : configureTime : The command to configure the external time. tmnConnect : the command for a manager to connect in order to be allowed to manage the SHE and to stop the NE sending the sheSystemStartupEnd trap. tmnDisconnect: the command for a TMN to disconnect from the NE. lctConnect : the command for a manager to connect as a LCT. The SHE then sends the sheSystemLctSession trap. lctDisconnect: the command for a LCT to disconnect from the NE. The SHE then sends the sheSystemLctSession trap. If a LCT does not disconnect a LCT session is automatically disconnected by the SHE after a internal timer expired. writeDatatoFlash: the command to start writing configuration data of all subsystems to flash-memory (long running command). configureTimeZone: the command to change the current timezone. setCPUThreshold: the command to configure the threshold that when CPU usage exceeds the certain limit, notification is sent. setMemoryThreshold: the command to configure the threshold that when Memory usage exceeds the certain limit, notification is sent. Notifications : sheSystemStartupEnd, sheSystemLctSession, sheSystemWriteDatatoFlashFinished, sheSystemChangedCPULoadThreshold, sheSystemChangedMemoryThreshold.
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemControlRequestType  

sheSystemControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.1.7.2
The status of a control request.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemControlTimer 1.3.6.1.4.1.231.7.1.2.1.2.1.7.3
The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemControlReqResult 1.3.6.1.4.1.231.7.1.2.1.2.1.7.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemControlRequestResultType  

sheSystemControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.1.7.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemControlExternalTime 1.3.6.1.4.1.231.7.1.2.1.2.1.7.6
The external time of the net element (UTC). The manager should set this time after first time power up or resetSystem and should refresh it once a day.
Status: current Access: read-write
OBJECT-TYPE    
  TimeTicks  

sheSystemControlTimeZone 1.3.6.1.4.1.231.7.1.2.1.2.1.7.7
The Time Zone of the net element. The TMN-OS should set this time zone in front of the NE's external time. UTC, UTC+1, UTC+2, UTC+3, UTC+3.30, UTC+4, UTC+4.30, UTC+5, UTC+5.30, UTC+5.45, UTC+6, UTC+6.30, UTC+7, UTC+8, UTC+8.45, UTC+9, UTC+9.30, UTC+10, UTC+10.30, UTC+11, UTC+11.30, UTC+12, UTC+12.45, UTC+13, UTC+14, UTC-1, UTC-2, UTC-2.30, UTC-3, UTC-3.30, UTC-4, UTC-4.30, UTC-5, UTC-6, UTC-7, UTC-8, UTC-9, UTC-9.30, UTC-10, UTC-11, UTC-12, An automatic DST (dayligth saving time) switchover is not supported by the NE!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

sheSystemControlCPUThreshold 1.3.6.1.4.1.231.7.1.2.1.2.1.7.8
The CPU Load Threshold of System. The manager should set this threshold about CPU Load.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 20..100  

sheSystemControlCPUThresholdInterval 1.3.6.1.4.1.231.7.1.2.1.2.1.7.9
The sampling interval for CPU threshold. Average CPU usage is checked on every interval configured.
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemThresholdIntervalType  

sheSystemControlMemoryThreshold 1.3.6.1.4.1.231.7.1.2.1.2.1.7.10
The Memory Usage Threshold of System. The manager should set this threshold about Memory usage.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheSystemControlMemoryThresholdInterval 1.3.6.1.4.1.231.7.1.2.1.2.1.7.11
The sampling interval for CPU threshold. Memory usage is checked on every interval configured.
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemThresholdIntervalType  

sheSystemTimeZone 1.3.6.1.4.1.231.7.1.2.1.2.1.8
The Time Zone of the net element. The TMN-OS should set this time zone in front of the NE's external time. UTC, UTC+1, UTC+2, UTC+3, UTC+3.30, UTC+4, UTC+4.30, UTC+5, UTC+5.30, UTC+5.45, UTC+6, UTC+6.30, UTC+7, UTC+8, UTC+8.45, UTC+9, UTC+9.30, UTC+10, UTC+10.30, UTC+11, UTC+11.30, UTC+12, UTC+12.45, UTC+13, UTC+14, UTC-1, UTC-2, UTC-2.30, UTC-3, UTC-3.30, UTC-4, UTC-4.30, UTC-5, UTC-6, UTC-7, UTC-8, UTC-9, UTC-9.30, UTC-10, UTC-11, UTC-12, An automatic DST (dayligth saving time) switchover is not supported by the NE!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

sheSystem5SecCPULoad 1.3.6.1.4.1.231.7.1.2.1.2.1.9
The Avg. Value of CPU Load for 5 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystem1MinCPULoad 1.3.6.1.4.1.231.7.1.2.1.2.1.10
The Avg. Value of CPU Load for 1 minute.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystem10MinCPULoad 1.3.6.1.4.1.231.7.1.2.1.2.1.11
The Avg. Value of CPU Load for 1p minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystemCPULoadThreshold 1.3.6.1.4.1.231.7.1.2.1.2.1.12
The threshold of CPU Load.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 20..100  

sheSystemCPULoadThresholdInterval 1.3.6.1.4.1.231.7.1.2.1.2.1.13
The sampling interval of CPU Load.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemThresholdIntervalType  

sheSystemTotalMemory 1.3.6.1.4.1.231.7.1.2.1.2.1.14
The Total memory of system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystemUsedMemory 1.3.6.1.4.1.231.7.1.2.1.2.1.15
The Used memory of system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystemFreeMemory 1.3.6.1.4.1.231.7.1.2.1.2.1.16
The Free memory of system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystemMemoryThreshold 1.3.6.1.4.1.231.7.1.2.1.2.1.17
The threshold of Memory Usage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystemMemoryThresholdInterval 1.3.6.1.4.1.231.7.1.2.1.2.1.18
The sampling interval of Memory Usage.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemThresholdIntervalType  

sheSystemBootloaderVersion 1.3.6.1.4.1.231.7.1.2.1.2.1.19
Contains the version of bootloader.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sheSystemCliConnected 1.3.6.1.4.1.231.7.1.2.1.2.1.20
The value connected indicates that a CLI session is active. SHE sends the trap sheSystemCliConnected to all known TMN systems to inform whether the CLI session has been setup or terminated.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemTmnConnectedType  

sheSystemStartupResult 1.3.6.1.4.1.231.7.1.2.1.2.1.21
Result of the last NE startup . Values: startupInProgress(1), startupFailed(2), startupFinished(3)
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemStartupResultType  

sheSystemFile 1.3.6.1.4.1.231.7.1.2.1.2.2
OBJECT IDENTIFIER    

sheSystemFileControl 1.3.6.1.4.1.231.7.1.2.1.2.2.1
OBJECT IDENTIFIER    

sheSystemFileControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.2.1.1
File management commands : upload : a file is uploaded to the FTP server from the SHE NE. download : a file is downloaded from a FTP server to the SHE NE. uploadCardsAllOfType : upload for all cards af the same type. downloadCardsAllOfType : download for all cards af the same type. uploadAllOfSystem : Only for upload of all available remote inventory records! Parameters specify the type of file and the FTP server. downloads: - SW to a singleCard : commands to load a new load - SW to all cards of a type - restoreFile (configuration files) uploads: - log files - restoreFile (congfiguration files) - remote inventory (also AllOfSystem) - performance data Notifications : sheSystemFtp sheSystemSwLoadPromoted Alarms: sheSystemSwmFtpAccessError sheSystemSwmFtpExternalAccessError
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemFileControlRequestType  

sheSystemFileControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.2.1.2
The status of a control request.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemFileControlTimer 1.3.6.1.4.1.231.7.1.2.1.2.2.1.3
The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemFileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.2.2.1.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemFileControlRequestResultType  

sheSystemFileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.2.1.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemFileControlTypeOfFile 1.3.6.1.4.1.231.7.1.2.1.2.2.1.6
The file type definition: 1..stored load, (only download) 2..error log, (only upload) 3..restoreFile (both up/download) 4..remoteInventory (only upload, AllOfSystem possible) 5..performanceData (only upload) 6..alarmLog (only upload) 7..uptimeLog (only upload)
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemTypeOfFile  

sheSystemFileControlPathName 1.3.6.1.4.1.231.7.1.2.1.2.2.1.7
Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemFileControlFileName 1.3.6.1.4.1.231.7.1.2.1.2.2.1.8
File name of file on FTP server. Spaces in filenames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

sheSystemFileControlCardType 1.3.6.1.4.1.231.7.1.2.1.2.2.1.9
The card type to be upgraded.
Status: current Access: read-write
OBJECT-TYPE    
  SheCardType  

sheSystemFileControlEntPhysicalIndex 1.3.6.1.4.1.231.7.1.2.1.2.2.1.10
The entPhysicalIndex of the card to be loaded.
Status: current Access: read-write
OBJECT-TYPE    
  PhysicalIndex  

sheSystemFileControlLoadStatus 1.3.6.1.4.1.231.7.1.2.1.2.2.1.12
Status of SHE download. 1..finished, 2..running, 3..broken,
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemFileLoadStatusType  

sheSystemFileControlServerAddr 1.3.6.1.4.1.231.7.1.2.1.2.2.1.13
Address of FTP server (dotted notation). Attribute only valid in var bind list with correct sheSystemFileControlCommand. Read-access will report an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemFileControlUsrName 1.3.6.1.4.1.231.7.1.2.1.2.2.1.14
Username for FTP access. Attribute only valid in var bind list with correct sheSystemFileControlCommand. Read-access will report an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemFileControlPassword 1.3.6.1.4.1.231.7.1.2.1.2.2.1.15
Password for FTP access. Attribute only valid in var bind list with correct sheSystemFileControlCommand. Read-access will report an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemFileSwFileTable 1.3.6.1.4.1.231.7.1.2.1.2.2.2
File Table of SHE. List of all files per card present on the SHE and their counterpart on the FTP server Information about Primary and Secondary loads is also found in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheSystemFileSwFileEntry

sheSystemFileSwFileEntry 1.3.6.1.4.1.231.7.1.2.1.2.2.2.1
An entry in the sheSystemFileSwTable. Notifications : none.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheSystemFileSwFileEntry  

sheSystemFileSwfIndex 1.3.6.1.4.1.231.7.1.2.1.2.2.2.1.1
Second Index of file table.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemFileIndexType  

sheSystemFileSwfFileName 1.3.6.1.4.1.231.7.1.2.1.2.2.2.1.2
File name of file in SHE file system.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemFileSwfTypeOfFile 1.3.6.1.4.1.231.7.1.2.1.2.2.2.1.3
The file type definition: 1..stored load, (only download) 2..error log, (only upload) 3..restoreFile (both up/download) 4..remoteInventory (only upload, AllOfSystem possible) 5..performanceData (only upload) 6..alarmLog (only upload) 7..uptimeLog (only upload)
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemTypeOfFile  

sheSystemFileSwfVersion 1.3.6.1.4.1.231.7.1.2.1.2.2.2.1.4
File or software version of file in the SHE file system.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemFileSwfSize 1.3.6.1.4.1.231.7.1.2.1.2.2.2.1.5
Size of file in SHE file system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystemFileSwfTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.2.2.1.6
Time stamp of file in file system of SHE.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemNotifications 1.3.6.1.4.1.231.7.1.2.1.2.3
OBJECT IDENTIFIER    

sheSystemEvents 1.3.6.1.4.1.231.7.1.2.1.2.3.1
OBJECT IDENTIFIER    

sheSystemStartupEnd 1.3.6.1.4.1.231.7.1.2.1.2.3.1.1
End of startup.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemFtp 1.3.6.1.4.1.231.7.1.2.1.2.3.1.2
Reports the result of a file up/download. The sheSystemFileControlRequest reports either upload / download The sheSystemFileControlLoadStatus reports either finished / ongoing / broken.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemSwLoadPromoted 1.3.6.1.4.1.231.7.1.2.1.2.3.1.3
The upgraded load is promoted to be good/trusted.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemSwLoadPromotionFailed 1.3.6.1.4.1.231.7.1.2.1.2.3.1.4
Sent when load promotion failed. Card will restart with fallback load. The ReqResult should contain some detailed information about the error-reason (tbd.).
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemLctSession 1.3.6.1.4.1.231.7.1.2.1.2.3.1.5
A LCT session is connected or disconnected.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemWriteDatatoFlashFinished 1.3.6.1.4.1.231.7.1.2.1.2.3.1.6
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemChangedCPULoadThreshold 1.3.6.1.4.1.231.7.1.2.1.2.3.1.7
CPU Load Threshold change state by user.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemChangedMemoryThreshold 1.3.6.1.4.1.231.7.1.2.1.2.3.1.8
Memory usage Threshold change state by user.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemCliSession 1.3.6.1.4.1.231.7.1.2.1.2.3.1.9
A CLI session is connected or disconnected.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemAlarms 1.3.6.1.4.1.231.7.1.2.1.2.3.2
OBJECT IDENTIFIER    

sheSystemCPULoadThresholdExceeded 1.3.6.1.4.1.231.7.1.2.1.2.3.2.1
Measured CPU load has exceeded the threshold in the given measuring interval.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemMemoryThresholdExceeded 1.3.6.1.4.1.231.7.1.2.1.2.3.2.2
Measured memory usage has exceeded the threshold in the given measuring interval.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemNtpClient 1.3.6.1.4.1.231.7.1.2.1.2.5
OBJECT IDENTIFIER    

sheSystemNtpClientEnabled 1.3.6.1.4.1.231.7.1.2.1.2.5.1
NTP Client enable status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

sheSystemNtpClientXmitInterval 1.3.6.1.4.1.231.7.1.2.1.2.5.2
NTP Client transmit-packet interval to request time information from NTP server.. Valid range is 1 hour up to 2160 hours (3 months). The default value should be 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2160  

sheSystemNtpClientServerTable 1.3.6.1.4.1.231.7.1.2.1.2.5.3
NTP Client server Table of SHE.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheSystemNtpClientServerEntry

sheSystemNtpClientServerEntry 1.3.6.1.4.1.231.7.1.2.1.2.5.3.1
An entry in the sheSystemNtpClientTable. Notifications : none.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheSystemNtpClientServerEntry  

sheSystemNtpClientServerIndex 1.3.6.1.4.1.231.7.1.2.1.2.5.3.1.1
Index of file table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

sheSystemNtpClientServerName 1.3.6.1.4.1.231.7.1.2.1.2.5.3.1.2
Server name of NTP Client in SHE NTP Client system.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

sheSystemNtpClientControl 1.3.6.1.4.1.231.7.1.2.1.2.5.4
OBJECT IDENTIFIER    

sheSystemNtpClientControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.5.4.1
NtpClient management commands : enabledNtpClient : NtpClient client is enabled by users. disabledNtpClient : NtpClient client is disabled bu users changedNtpClientXmitInterval : NtpClient transmit-packet interval is changed by users. addedNtpClientServerName : NtpClient source hostname is added into source list. deletedNtpClientServerName : NtpClient source hostname is deleted in source list. Notifications: ZZZZZZ
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemNtpClientControlRequestType  

sheSystemNtpClientControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.5.4.2
The status of a control request.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemNtpClientControlTimer 1.3.6.1.4.1.231.7.1.2.1.2.5.4.3
The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemNtpClientControlReqResult 1.3.6.1.4.1.231.7.1.2.1.2.5.4.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemNtpClientControlRequestResultType  

sheSystemNtpClientControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.5.4.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemNtpClientControlXmitInterval 1.3.6.1.4.1.231.7.1.2.1.2.5.4.6
Configure NTP Client transmit-packet interval to request time information from NTP server.. Valid range is 1 hour up to 2160 hours (3 months). The default value should be 24 hours.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2160  

sheSystemNtpClientControlServername 1.3.6.1.4.1.231.7.1.2.1.2.5.4.7
NtpClient Source hostname or Ip address to get current time.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheSystemNtpClientControlServerIndex 1.3.6.1.4.1.231.7.1.2.1.2.5.4.8
Index of the addressed table entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

sheSystemNtpClientNotifications 1.3.6.1.4.1.231.7.1.2.1.2.5.5
OBJECT IDENTIFIER    

sheSystemNtpClientEnable 1.3.6.1.4.1.231.7.1.2.1.2.5.5.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemNtpClientDisable 1.3.6.1.4.1.231.7.1.2.1.2.5.5.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemNtpClientChangeXmitInterval 1.3.6.1.4.1.231.7.1.2.1.2.5.5.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemNtpClientAddServerName 1.3.6.1.4.1.231.7.1.2.1.2.5.5.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemNtpClientDeleteServerName 1.3.6.1.4.1.231.7.1.2.1.2.5.5.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDnsServer 1.3.6.1.4.1.231.7.1.2.1.2.6
OBJECT IDENTIFIER    

sheSystemDnsServerTable 1.3.6.1.4.1.231.7.1.2.1.2.6.1
DNS server Table of SHE.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheSystemDnsServerEntry

sheSystemDnsServerEntry 1.3.6.1.4.1.231.7.1.2.1.2.6.1.1
An entry in the sheSystemDnsServerTable. Notifications : none.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheSystemDnsServerEntry  

sheSystemDnsServerIndex 1.3.6.1.4.1.231.7.1.2.1.2.6.1.1.1
Index of DnsServer table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

sheSystemDnsServerAddr 1.3.6.1.4.1.231.7.1.2.1.2.6.1.1.2
IP address of DNS Server system.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheSystemDnsServerControl 1.3.6.1.4.1.231.7.1.2.1.2.6.2
OBJECT IDENTIFIER    

sheSystemDnsServerControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.6.2.1
DNS Server management commands : addedDnsServerName : DNS Server IP Address is added into server list. deletedDnsServerName : DNS Server IP Address is deleted in server list. Notifications: ZZZZZZ
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemDnsServerControlRequestType  

sheSystemDnsServerControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.6.2.2
The status of a control request.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemDnsServerControlTimer 1.3.6.1.4.1.231.7.1.2.1.2.6.2.3
The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemDnsServerControlReqResult 1.3.6.1.4.1.231.7.1.2.1.2.6.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemDnsServerControlRequestResultType  

sheSystemDnsServerControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.6.2.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemDnsServerControlAddr 1.3.6.1.4.1.231.7.1.2.1.2.6.2.6
DNS Server Ip address.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheSystemDnsServerControlIndex 1.3.6.1.4.1.231.7.1.2.1.2.6.2.7
Index of the addressed table entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

sheSystemDnsServerNotifications 1.3.6.1.4.1.231.7.1.2.1.2.6.3
OBJECT IDENTIFIER    

sheSystemDnsServerAddAddr 1.3.6.1.4.1.231.7.1.2.1.2.6.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDnsServerDeleteAddr 1.3.6.1.4.1.231.7.1.2.1.2.6.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemManagementSession 1.3.6.1.4.1.231.7.1.2.1.2.7
OBJECT IDENTIFIER    

sheSystemManagementSessionSnmpAgingTime 1.3.6.1.4.1.231.7.1.2.1.2.7.1
Aging time for SNMP management session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 300..3600  

sheSystemManagementSessionTable 1.3.6.1.4.1.231.7.1.2.1.2.7.2
Management session information table for SHE.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheSystemManagementSessionEntry

sheSystemManagementSessionEntry 1.3.6.1.4.1.231.7.1.2.1.2.7.2.1
An entry in the sheSystemManagementSessionTable. Notifications : none.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheSystemManagementSessionEntry  

sheSystemManagementSessionIndex 1.3.6.1.4.1.231.7.1.2.1.2.7.2.1.1
Index of Management Session Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

sheSystemManagementSessionType 1.3.6.1.4.1.231.7.1.2.1.2.7.2.1.2
Management Session Type.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemManagementSessionType  

sheSystemManagementSessionSnmpExpiredTime 1.3.6.1.4.1.231.7.1.2.1.2.7.2.1.3
Only SNMP Management Session expired Time. If the session is Telnet, this value is 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystemManagementSessionAddress 1.3.6.1.4.1.231.7.1.2.1.2.7.2.1.4
Management Session IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheSystemManagementSessionControl 1.3.6.1.4.1.231.7.1.2.1.2.7.3
OBJECT IDENTIFIER    

sheSystemManagementSessionControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.7.3.1
Management Session global user commands : setSnmpSessionAgingTime : configuring SNMP session aging time. Notifications: sheSystemManagementSessionChangedSnmpAgingTime
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemManagementSessionControlRequestType  

sheSystemManagementSessionControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.7.3.2
The status of a control request.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemManagementSessionControlTimer 1.3.6.1.4.1.231.7.1.2.1.2.7.3.3
The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemManagementSessionControlReqResult 1.3.6.1.4.1.231.7.1.2.1.2.7.3.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemManagementSessionControlReqResultType  

sheSystemManagementSessionControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.7.3.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemManagementSessionControlSnmpAgingTime 1.3.6.1.4.1.231.7.1.2.1.2.7.3.6
SNMP Session Aging Time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 300..3600  

sheSystemManagementSessionNotifications 1.3.6.1.4.1.231.7.1.2.1.2.7.4
OBJECT IDENTIFIER    

sheSystemManagementSessionConnection 1.3.6.1.4.1.231.7.1.2.1.2.7.4.1
Management Session Connect event. When a new session is detected, the event occurs.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemManagementSessionDisconnection 1.3.6.1.4.1.231.7.1.2.1.2.7.4.2
Management Session Disonnect event. When an existing session is diconnected, the event occurs. In case of SNMP sessions, when SNMP aging timer is expired, disconnection decision.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemManagementSessionChangedSnmpAgingTime 1.3.6.1.4.1.231.7.1.2.1.2.7.4.3
SNMP Management Session Aging Time Change Event.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemConfigLog 1.3.6.1.4.1.231.7.1.2.1.2.8
OBJECT IDENTIFIER    

sheSystemConfigLogGroup 1.3.6.1.4.1.231.7.1.2.1.2.8.1
OBJECT IDENTIFIER    

sheSystemConfigLogEntryNumber 1.3.6.1.4.1.231.7.1.2.1.2.8.1.1
The number of the configuration log entries to keep. 0: disable configuration logging
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1000  

sheSystemConfigLogFtpServerAddress 1.3.6.1.4.1.231.7.1.2.1.2.8.1.2
FTP server's IP address to which log file will be transferred. Default:0.0.0.0 0.0.0.0: disable FTP transfer
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheSystemConfigLogFtpUser 1.3.6.1.4.1.231.7.1.2.1.2.8.1.3
User ID for FTP server. Merge-Info: Element is not needed. Read-access will report an empty string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemConfigLogFtpPassword 1.3.6.1.4.1.231.7.1.2.1.2.8.1.4
Password for FTP server. Merge-Info: Element is not needed. Read-access will report an empty string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemConfigLogFtpInterval 1.3.6.1.4.1.231.7.1.2.1.2.8.1.5
Timer interval between FTP transfers of log in second 0: disable FTP transfer
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

sheSystemConfigLogFtpPathName 1.3.6.1.4.1.231.7.1.2.1.2.8.1.6
Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemConfigLogControl 1.3.6.1.4.1.231.7.1.2.1.2.8.2
OBJECT IDENTIFIER    

sheSystemConfigLogControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.8.2.1
Config log global user commands
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemConfigLogControlRequestType  

sheSystemConfigLogControlEntryNumber 1.3.6.1.4.1.231.7.1.2.1.2.8.2.2
The number of the configuration log entries to keep
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

sheSystemConfigLogControlFtpAddress 1.3.6.1.4.1.231.7.1.2.1.2.8.2.3
FTP server's IP address to which log file will be transferred
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheSystemConfigLogControlFtpUser 1.3.6.1.4.1.231.7.1.2.1.2.8.2.4
User ID for FTP server. Read-access will report an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemConfigLogControlFtpPassword 1.3.6.1.4.1.231.7.1.2.1.2.8.2.5
Password for FTP server. Read-access will report an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemConfigLogControlFtpInterval 1.3.6.1.4.1.231.7.1.2.1.2.8.2.6
Timer interval between FTP transfers of log in second 0: disable FTP transfer
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

sheSystemConfigLogControlFtpPathName 1.3.6.1.4.1.231.7.1.2.1.2.8.2.7
Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemConfigLogControlReqResult 1.3.6.1.4.1.231.7.1.2.1.2.8.2.8
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemControlRequestResultType  

sheSystemConfigLogControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.8.2.9
The status of a control request.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemConfigLogControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.8.2.10
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemConfigLogNotifications 1.3.6.1.4.1.231.7.1.2.1.2.8.3
OBJECT IDENTIFIER    

sheSystemConfigLogEntryNumberChanged 1.3.6.1.4.1.231.7.1.2.1.2.8.3.1
Config entry number to keep is changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemConfigLogFtpLoginInfoChanged 1.3.6.1.4.1.231.7.1.2.1.2.8.3.2
FTP server address and login information is changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemConfigLogFtpIntervalChanged 1.3.6.1.4.1.231.7.1.2.1.2.8.3.3
Timer interval is changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

sheSystemAutoConfigBackup 1.3.6.1.4.1.231.7.1.2.1.2.9
OBJECT IDENTIFIER    

sheSystemAutoConfigBackupGroup 1.3.6.1.4.1.231.7.1.2.1.2.9.1
OBJECT IDENTIFIER    

sheSystemAutoConfigBackupEnabled 1.3.6.1.4.1.231.7.1.2.1.2.9.1.1
Enable/disable auto configuration backup feature true: enable false: disable
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sheSystemAutoConfigBackupFtpServerAddress 1.3.6.1.4.1.231.7.1.2.1.2.9.1.2
FTP server's IP address to which config file will be transferred. Default:0.0.0.0 0.0.0.0: disable FTP transfer
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheSystemAutoConfigBackupFtpUser 1.3.6.1.4.1.231.7.1.2.1.2.9.1.3
User ID for FTP server
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(128)  

sheSystemAutoConfigBackupFtpPassword 1.3.6.1.4.1.231.7.1.2.1.2.9.1.4
Password for FTP server
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(128)  

sheSystemAutoConfigBackupFtpPathName 1.3.6.1.4.1.231.7.1.2.1.2.9.1.5
Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ) Default: /
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(128)  

sheSystemAutoConfigBackupTime 1.3.6.1.4.1.231.7.1.2.1.2.9.1.6
It indicates a time that ftp backup should be performed since autoconfiguration has been set.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 30..2147483647  

sheSystemAutoConfigBackupControl 1.3.6.1.4.1.231.7.1.2.1.2.9.2
OBJECT IDENTIFIER    

sheSystemAutoConfigBackupControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.9.2.1
AutoConfigBackup global user commands
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemAutoConfigBackupControlRequest  

sheSystemAutoConfigBackupControlEnabled 1.3.6.1.4.1.231.7.1.2.1.2.9.2.2
Enable/disable auto configuration backup feature true: enabled false: disabled
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sheSystemAutoConfigBackupControlFtpServerAddress 1.3.6.1.4.1.231.7.1.2.1.2.9.2.3
FTP server's IP address to which config file will be transferred.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheSystemAutoConfigBackupControlFtpUser 1.3.6.1.4.1.231.7.1.2.1.2.9.2.4
User ID for FTP server
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(128)  

sheSystemAutoConfigBackupControlFtpPassword 1.3.6.1.4.1.231.7.1.2.1.2.9.2.5
Password for FTP server
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(128)  

sheSystemAutoConfigBackupControlFtpPathName 1.3.6.1.4.1.231.7.1.2.1.2.9.2.6
Path name of file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Default: /
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(128)  

sheSystemAutoConfigBackupControlBackupTime 1.3.6.1.4.1.231.7.1.2.1.2.9.2.7
It indicates a time that ftp backup should be performed since autoconfiguration has been set.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..2147483647  

sheSystemAutoConfigBackupNotifications 1.3.6.1.4.1.231.7.1.2.1.2.9.3
OBJECT IDENTIFIER    

sheSystemAutoConfigBackupEnabledChanged 1.3.6.1.4.1.231.7.1.2.1.2.9.3.1
Auto configuration backup is enabled or disabled.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemAutoConfigBackupFtpLoginInfoChanged 1.3.6.1.4.1.231.7.1.2.1.2.9.3.2
FTP server address and login information is changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemAutoConfigBackupTimeChanged 1.3.6.1.4.1.231.7.1.2.1.2.9.3.3
Config backup time is changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemSnmp 1.3.6.1.4.1.231.7.1.2.1.2.10
OBJECT IDENTIFIER    

sheSystemNotificationCounter 1.3.6.1.4.1.231.7.1.2.1.2.10.1
Number of last sended notification. This OID is last member of each sended notification from SHE NE. A TMN system should now be able to check, if all notification were received and if not a consistency check could be performed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemMaintenance 1.3.6.1.4.1.231.7.1.2.1.2.11
OBJECT IDENTIFIER    

sheSystemSwMaintenance 1.3.6.1.4.1.231.7.1.2.1.2.11.1
OBJECT IDENTIFIER    

sheSystemSwMaintenanceBase 1.3.6.1.4.1.231.7.1.2.1.2.11.1.1
OBJECT IDENTIFIER    

sheSystemSwmSapsServerAddr 1.3.6.1.4.1.231.7.1.2.1.2.11.1.1.1
Address of SAPS FTP server (dotted notation).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemSwmSapsPathName 1.3.6.1.4.1.231.7.1.2.1.2.11.1.1.2
Path name of SAPS file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemSwmSapsFileName 1.3.6.1.4.1.231.7.1.2.1.2.11.1.1.3
File name of SAPS file on FTP server. Spaces in filenames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

sheSystemSwmAdminState 1.3.6.1.4.1.231.7.1.2.1.2.11.1.1.4
This state describes the current usage of automatic sw upgrade. The following states are supported: unlocked(1) -> saps handling used locked(2) -> saps handling not used (default) Important Note: If the automatic sw upgrade system is enabled, the sheSystemFileControl group for single sw upgrades is always busy!! If a sw upgrade should be start for a single Card or a single card type, the sheSystemSwmAdminState has to be locked and then the sheSystemFileControl could be used!
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemAdminState  

sheSystemSwmCurrentStatus 1.3.6.1.4.1.231.7.1.2.1.2.11.1.1.5
This parameter describes the current status of automatic sw upgrade process. The following states are supported: passive(1) -> saps handling disabled (default) or saps handling enabled but last request failed started(2) -> saps handling enabled, start loading S-APS file active(3) -> saps handling enabled and running
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemSwmCurrentStatusType  

sheSystemSwMaintenanceTaskTable 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2
Table of the current active or failed tasks of SW upgrade. This table is used to display the automatic upgrade status for single plugin units at the TMN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheSystemSwMaintenanceTaskEntry

sheSystemSwMaintenanceTaskEntry 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2.1
Entry of the SW upgrade task table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheSystemSwMaintenanceTaskEntry  

sheSystemSwmTIndex 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2.1.1
Unique value to identify an entry of this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

sheSystemSwmTCardType 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2.1.2
Indicates the plug-in unit type to be upgraded.
Status: current Access: read-only
OBJECT-TYPE    
  SheCardType  

sheSystemSwmTEntPhysicalIndex 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2.1.3
The entPhysicalIndex of PIU to be loaded.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

sheSystemSwmTTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2.1.4
The time stamp of the task. It is updated anytime the upgrade task state changes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemSwmTUpgradeState 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2.1.5
Identifies the current processing state of the upgrade task: - sutInitialized - sutToDo - sutStarted - sutCrashed - sutFtpDone - sutDone - sutReadyForReset - sutResetInProgress - sutObsolete
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemMaintenanceControlReqResult  

sheSystemSwmTUpgradeResult 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2.1.6
This read-only attribute informs about the result of the performed upgrade (in case of failed upgrade the error reason).
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemMaintenanceControlReqResult  

sheSystemSwmTSwVersion 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2.1.7
String containing the APS version which is loaded into the plug-in unit.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemSwmTSwVersionNeed 1.3.6.1.4.1.231.7.1.2.1.2.11.1.2.1.8
String containing the APS version which should be loaded into the plug-in unit.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemSwMaintenanceControl 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3
OBJECT IDENTIFIER    

sheSystemSwmControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.1
SW upgrade command requests from TMN. setSystemMaintenanceBase(50), - Set needed ftp access information for automatic SAPS request's. notifications: sheSystemSwmBaseSet setSwmAdminState(51), - lock or unlock the automatic saps system notifications: sheSystemSwmBaseAdminStateSet sheSystemReadSAPSContentFileReady (if set to unlock) sheSystemSwmFTPError (if ftp could not reached) swmUpgrStartRequest(100), - start new upgrade procedure including automatic load activation notifications: sheSystemSwmFTPError sheSystemSwmUpgradeStartResult swmUpgrStartRequestNoReset(101), - start new upgrade procedure without automatic load activation notifications: sheSystemSwmReadyForReset sheSystemSwmFTPError sheSystemUpgradeCanceled (bad case only) sheSystemSwmUpgradeStartResult swmReadSAPSContentFile(102), - start request of new SAPS file from server, no download action is started notification: sheSystemReadSAPSContentFileReady sheSystemSwmFTPError
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemMaintenanceControlReq  

sheSystemSwmControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.2
The status of the current request.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemSwmControlTimer 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.3
Wait time in seconds after complete upgrade for a unit type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemSwmControlReqResult 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemMaintenanceControlReqResult  

sheSystemSwmControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemSwmControlSapsServerAddr 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.6
Address of SAPS FTP server (dotted notation).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemSwmControlSapsPathName 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.7
Path name of SAPS file on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemSwmControlSapsFileName 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.8
File name of SAPS file on FTP server. Spaces in filenames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

sheSystemSwmControlSapsUsrName 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.9
Username for SAPS FTP access. Read-access to this attribute will deliver 20 times sign '-'
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemSwmControlSapsPassword 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.10
Password for SAPS FTP access. Read-access to this attribute will deliver 20 times sign '-'
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemSwmControlAdminState 1.3.6.1.4.1.231.7.1.2.1.2.11.1.3.11
This set the current usage of automatic sw upgrade. The following states are supported: unlocked(1) -> saps handling used locked(2) -> saps handling not used (default)
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemAdminState  

sheSystemSwMaintenanceNotifications 1.3.6.1.4.1.231.7.1.2.1.2.11.1.4
OBJECT IDENTIFIER    

sheSystemSwmBaseSet 1.3.6.1.4.1.231.7.1.2.1.2.11.1.4.1
Configuration trap for SAPS basic ftp access settings.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemSwmAdminStateSet 1.3.6.1.4.1.231.7.1.2.1.2.11.1.4.2
Configuration trap for SAPS basic admin state settings.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemReadSAPSContentFileReady 1.3.6.1.4.1.231.7.1.2.1.2.11.1.4.3
Result trap for request of new SAPS file from server.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemSwmReadyForReset 1.3.6.1.4.1.231.7.1.2.1.2.11.1.4.4
Trap will be send after succesfull SwUpgrade for a single card if a sw upgrade was started without automatic load activation.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemSwmFTPError 1.3.6.1.4.1.231.7.1.2.1.2.11.1.4.5
Result trap for sw upgrade FTP access.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemSwmUpgradeStartResult 1.3.6.1.4.1.231.7.1.2.1.2.11.1.4.6
Configuration result trap for long running command.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemSwmCurrentStatusChanged 1.3.6.1.4.1.231.7.1.2.1.2.11.1.4.7
The current operational status of the automatic sw upgrade process changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemSwMaintenanceAlarms 1.3.6.1.4.1.231.7.1.2.1.2.11.1.5
OBJECT IDENTIFIER    

sheSystemSwmFtpAccessError 1.3.6.1.4.1.231.7.1.2.1.2.11.1.5.1
Alarm will be set because of failures during read or write during the NE internal FTP communication. A successful ftp process will clear this alarm. Alarm will be used by manual download and automatic saps upgrade.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemSwmFtpExternalAccessError 1.3.6.1.4.1.231.7.1.2.1.2.11.1.5.2
Alarm will be set because of failures during read or write during the NE external FTP communication (access to external ftp server failed). A successful ftp process will clear this alarm. Alarm will be used by manual download and automatic saps upgrade.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemSwmStatusError 1.3.6.1.4.1.231.7.1.2.1.2.11.1.5.3
Alarm will be set because of failures during automatic sw upgrade process which force a temporary switch off for this process. A restart could be triggered by the following command's: setSwmAdminState(51) swmUpgrStartRequest(100) swmUpgrStartRequestNoReset(101)
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDbMaintenance 1.3.6.1.4.1.231.7.1.2.1.2.11.2
OBJECT IDENTIFIER    

sheSystemDbMaintenanceBase 1.3.6.1.4.1.231.7.1.2.1.2.11.2.1
OBJECT IDENTIFIER    

sheSystemDbmServerAddr 1.3.6.1.4.1.231.7.1.2.1.2.11.2.1.1
Address of DB FTP server (dotted notation).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemDbmPathName 1.3.6.1.4.1.231.7.1.2.1.2.11.2.1.2
Path name of DB backup files on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemDbmRemoteBackupAdminState 1.3.6.1.4.1.231.7.1.2.1.2.11.2.1.3
This state describes the current usage of automatic remote db backup. The following states are supported: unlocked(1) -> remote db backup handling used locked(2) -> remote db backup handling not used (default)
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemAdminState  

sheSystemDbmBackupStartTime 1.3.6.1.4.1.231.7.1.2.1.2.11.2.1.4
Start time basis for remote DB backup after system restart, backup timer reconfigurations or system clock reset. The first backup will be started at this time + sheSystemDbmBackupPeriod and will then be repeated each sheSystemDbmBackupPeriod. Range: 0 (0 am) .. 1439 (23.59 pm). Default: 0 Reminder: NE uses always a UTC time base.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1439  

sheSystemDbmBackupPeriod 1.3.6.1.4.1.231.7.1.2.1.2.11.2.1.5
Interval between two remote backup operations in hours. Backup is started only if there were relevant configuration changes during the last period. Default: 24 hours
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..48  

sheSystemDbmBackupWaitingPeriod 1.3.6.1.4.1.231.7.1.2.1.2.11.2.1.6
Waiting period in minutes before next local backup, in case of configuration changes. Default value : 5 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..59  

sheSystemDbmBackupMaxFileNumber 1.3.6.1.4.1.231.7.1.2.1.2.11.2.1.7
This number describes the maximum set of different backup files on the remote ftp site. Default number is 5.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..32  

sheSystemDbmLocalBackupAdminState 1.3.6.1.4.1.231.7.1.2.1.2.11.2.1.8
This value administrate the automatic local db backup after sheSystemDbmBackupWaitingPeriod in case of configuration actions. Default: unlocked (automatic local backup is enabled)
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemAdminState  

sheSystemDbBackupFilesTable 1.3.6.1.4.1.231.7.1.2.1.2.11.2.2
Table shows the DB backup files at the FTP server with time and date of their creation. The table is empty per default and can be updated with user command refreshDbBackupFilesTable. This command searches all existing DB backup files at the FTP server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheSystemDbBackupFilesEntry

sheSystemDbBackupFilesEntry 1.3.6.1.4.1.231.7.1.2.1.2.11.2.2.1
Entry of the xldv20DbBackupFilesTable. Notifications : .
Status: current Access: not-accessible
OBJECT-TYPE    
  SheSystemDbBackupFilesEntry  

sheSystemDbBackupFileIndex 1.3.6.1.4.1.231.7.1.2.1.2.11.2.2.1.1
Unique value to identify an entry of this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..32  

sheSystemDbBackupFileName 1.3.6.1.4.1.231.7.1.2.1.2.11.2.2.1.2
The name of the DB backup file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

sheSystemDbBackupFileTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.11.2.2.1.3
The time stamp of the DB backup file, i.e. the time and date when the DB backup file has been created.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemDbmControl 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3
OBJECT IDENTIFIER    

sheSystemDbmControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.1
Database Management commands : setSystemMaintenanceBase: - Set needed ftp access information for automatic DB request's. notifications: sheSystemDbmBaseSet backupDb : - The command for a manual database backup into the FEPROM of the DSLAM and to the FTP server. The return value commExecStarted indicates the beginning of DB storage. notification: sheSystemDbmResult refreshDbBackupFilesTable : - The DSLAM supports several backup files. The command retrieves the backup files at the FTP server and provides their file names and time and date of creation in the table sheSystemDbBackFilesTable. notification: sheSystemRefreshDbmBackupFilesTable dbReloadSpecificFile: - Reload a specific file from sheSystemDbBackFilesTable into the DSLAM. If successful, the CXU perform a reset for activation. notification: sheSystemDbmResult setBackupPeriod: - Configure the backup period settings for automatic remote backup to ftp server and local backup to EEPROM. notification: sheSystemDbmBackupPeriodSet setLocalBackupAdminState: - Enables or disables the automatic local backup feature. notification: sheSystemDbmLocalBackupAdminstateSet setRemoteBackupAdminState: - Enables or disables the automatic remote backup feature. notification: sheSystemDbmRemoteBackupAdminstateSet
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemMaintenanceControlReq  

sheSystemDbmControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.2
The status of the control request.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemDbmControlTimer 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.3
The maximum wait time for the manager when a DB storage request cannot be executed immediately (value commExecStarted in the result attribute sheSystemMaintenanceControlReqResult). The manager reads this value from the DSLAM. The end of request indicates the trap sheSystemTrDbBackup.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemDbmControlReqResultLocal 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.4
The result of the local backup request.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemMaintenanceControlReqResult  

sheSystemDbmControlReqResultRemote 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.5
The result of the last remote backup request.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemMaintenanceControlReqResult  

sheSystemDbmControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemDbmControlServerAddr 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.7
Address of DB FTP server (dotted notation).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemDbmControlPathName 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.8
Path name of DB backup files on FTP server. This path should be set relative to the ftp-server root. Use only linux notation ( / ). Spaces in pathnames are not allowed, because of possible problems with different FTP implementations (client and/or server)!!
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sheSystemDbmControlUsrName 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.9
Username for DB backup FTP access. Read-access to this attribute will deliver 20 times sign '-'
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemDbmControlPassword 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.10
Password for DB backup FTP access. Read-access to this attribute will deliver 20 times sign '-'
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

sheSystemDbmControlRemoteBackupAdminState 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.11
This set the current usage of automatic remote db backup. The following states are supported: unlocked(1) -> remote db backup handling used locked(2) -> remote db backup handling not used (default)
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemAdminState  

sheSystemDbmControlBackupStartTime 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.12
Start time basis for remote DB backup after system restart, backup timer reconfigurations or system clock reset. The first backup will be started at this time + sheSystemDbmBackupPeriod and will then be repeated each sheSystemDbmBackupPeriod. Range: 0 (0 am) .. 1439 (23.59 pm). Reminder: NE uses always a UTC time base.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1439  

sheSystemDbmControlBackupPeriod 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.13
Interval between two remote backup operations in hours. Backup is started only if there were relevant configuration changes during the last period.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..48  

sheSystemDbmControlBackupWaitingPeriod 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.14
Waiting period in minutes before next local backup, in case of configuration changes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..59  

sheSystemDbmControlBackupMaxFileNumber 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.15
This number describes the maximum set of different backup files on the remote ftp site.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32  

sheSystemDbmControlLocalBackupAdminState 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.16
This value administrate the automatic local db backup after sheSystemDbmBackupWaitingPeriod in case of configuration actions. Default: unlocked (automatic local backup is enabled)
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemAdminState  

sheSystemDbmControlBackupFileIndex 1.3.6.1.4.1.231.7.1.2.1.2.11.2.3.17
The index selects the DB backup file in the sheSystemDbBackupFilesTable which shall be loaded into the DSLAM from the FTP server with user command dbReloadSpecificFile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..32  

sheSystemDbMaintenanceNotifications 1.3.6.1.4.1.231.7.1.2.1.2.11.2.4
OBJECT IDENTIFIER    

sheSystemDbmBaseSet 1.3.6.1.4.1.231.7.1.2.1.2.11.2.4.1
Configuration trap for remote DB basic access settings.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDbmResult 1.3.6.1.4.1.231.7.1.2.1.2.11.2.4.3
Indicates the end and the result of the database backup or restore.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDbmBackupFilesTableRefreshed 1.3.6.1.4.1.231.7.1.2.1.2.11.2.4.4
Indicates end of user command refreshDbmBackupFilesTable.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDbmBackupPeriodSet 1.3.6.1.4.1.231.7.1.2.1.2.11.2.4.5
Settings for automatic backup period are set.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDbmLocalBackupAdminstateSet 1.3.6.1.4.1.231.7.1.2.1.2.11.2.4.6
Configuration notification for local db backup.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDbmRemoteBackupAdminstateSet 1.3.6.1.4.1.231.7.1.2.1.2.11.2.4.7
Configuration notification for local db backup.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDbMaintenanceAlarms 1.3.6.1.4.1.231.7.1.2.1.2.11.2.5
OBJECT IDENTIFIER    

sheSystemLocalDbInvalid 1.3.6.1.4.1.231.7.1.2.1.2.11.2.5.1
Alarm will be set if the local DB is invalid because of failures during read/write local DB or if the local DB was not updated yet after a configuration sequence.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemRemoteDbInvalid 1.3.6.1.4.1.231.7.1.2.1.2.11.2.5.2
Alarm will be set if the remote DB is invalid because of failures during read/write remote DB or if the remote DB was not updated yet after a configuration sequence.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemDbFtpAccessError 1.3.6.1.4.1.231.7.1.2.1.2.11.2.5.3
Alarm will be set because of failures during read or write on DB Ftp server.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemIpConfig 1.3.6.1.4.1.231.7.1.2.1.2.12
OBJECT IDENTIFIER    

sheSystemIpHostTable 1.3.6.1.4.1.231.7.1.2.1.2.12.1
This table contains attributes for each IP host interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheSystemIpHostEntry

sheSystemIpHostEntry 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1
An entry represents a set of configurations in sheSystemIpHostTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheSystemIpHostEntry  

sheSystemIpHostIndex 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.1
Table index. Each index uniquely identifies one Ip host table entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemIpHostName 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.2
A descriptional name that uniquely identifies a entry of this table. The name is selected by the NE and identify the interface also on CLI.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

sheSystemIpHostUseDhcp 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.3
Either to use Dhcp or not. If set to 0 (default) no DHCP will be used. Valid values: noUseDhcp(0), useDhcp(1) Note: Currently no support planed.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemIpHostUseDhcpType  

sheSystemIpHostIpAddress 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.4
IpAddress. Assigned by operator request or by DHCP if used.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheSystemIpHostSubnetMask 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.5
subnet mask
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheSystemIpHostOuterVlanId 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.6
The host vlan for this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Set to 0 if no host VLAN should be used.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..4093  

sheSystemIpHostInnerVlanId 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.7
The host vlan for this ip interface which should be used as inner tag if the NE run in double tagging mode. Set to 0 if no host VLAN should be used or if the NE uses single tag mode.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..4093  

sheSystemIpHostDescription 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.8
Could describe who uses this ip interface. This description could be used by the operator to store information about the intended interface usage. The parameter will not be evaluated by the NE.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheSystemIpHostOuterVlanPriority 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.9
The used .1p priority for host vlan of this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheSystemIpHostInnerVlanPriority 1.3.6.1.4.1.231.7.1.2.1.2.12.1.1.10
The used .1p priority for host vlan of this ip interface which should be used as inner tag if the NE run in double tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

sheSystemIpHostControl 1.3.6.1.4.1.231.7.1.2.1.2.12.2
OBJECT IDENTIFIER    

sheSystemIpHostControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.12.2.1
The request of a user command. createSystemIpHost (50) sheSystemIpHostControlUseDhcp sheSystemIpHostControlIpAddress sheSystemIpHostControlSubnetMask sheSystemIpHostControlOuterVlanId sheSystemIpHostControlInnerVlanId sheSystemIpHostControlDescription sheSystemIpHostControlOuterVlanPriority (new with R2.8 maintenance) sheSystemIpHostControlInnerVlanPriority (new with R2.8 maintenance) deleteSystemIpHost (51), sheSystemIpHostControlIndex modifySystemIpHost (52), sheSystemIpHostControlIndex sheSystemIpHostControlUseDhcp sheSystemIpHostControlIpAddress sheSystemIpHostControlSubnetMask sheSystemIpHostControlOuterVlanId sheSystemIpHostControlInnerVlanId sheSystemIpHostControlDescription sheSystemIpHostControlOuterVlanPriority (new with R2.8 maintenance) sheSystemIpHostControlInnerVlanPriority (new with R2.8 maintenance)
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemIpControlReqType  

sheSystemIpHostControlIndex 1.3.6.1.4.1.231.7.1.2.1.2.12.2.2
Table index
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheSystemIpHostControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.12.2.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemIpHostControlReqResult 1.3.6.1.4.1.231.7.1.2.1.2.12.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemControlRequestResultType  

sheSystemIpHostControlTimer 1.3.6.1.4.1.231.7.1.2.1.2.12.2.5
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheSystemIpHostControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.12.2.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemIpHostControlName 1.3.6.1.4.1.231.7.1.2.1.2.12.2.7
A descriptional name that uniquely identifies an entry of this table. This name was selected by the NE and identifies the interface also on CLI.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

sheSystemIpHostControlUseDhcp 1.3.6.1.4.1.231.7.1.2.1.2.12.2.8
Either to use Dhcp or not. If set to 0 (default) no DHCP will be used. Valid values: noUseDhcp(0), useDhcp(1) Note: Currently no support planed.
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemIpHostUseDhcpType  

sheSystemIpHostControlIpAddress 1.3.6.1.4.1.231.7.1.2.1.2.12.2.9
Ipaddress if no Dhcp is used.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheSystemIpHostControlSubnetMask 1.3.6.1.4.1.231.7.1.2.1.2.12.2.10
Subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheSystemIpHostControlOuterVlanId 1.3.6.1.4.1.231.7.1.2.1.2.12.2.11
The host vlan for this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Set to 0 if no host VLAN should be used.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..4093  

sheSystemIpHostControlInnerVlanId 1.3.6.1.4.1.231.7.1.2.1.2.12.2.12
The host vlan for this ip interface which should be used as inner tag if the NE run in double tagging mode. Set to 0 if no host VLAN should be used or if the NE uses single tag mode.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..4093  

sheSystemIpHostControlDescription 1.3.6.1.4.1.231.7.1.2.1.2.12.2.13
Could describe who uses this ip interface. This description could be used by the operator to store information about the intended interface usage. The parameter will not be evaluated by the NE.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sheSystemIpHostControlOuterVlanPriority 1.3.6.1.4.1.231.7.1.2.1.2.12.2.14
The used .1p priority for host vlan of this ip interface which should be used as outer tag in double tagging mode or in single tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheSystemIpHostControlInnerVlanPriority 1.3.6.1.4.1.231.7.1.2.1.2.12.2.15
The used .1p priority for host vlan of this ip interface which should be used as inner tag if the NE run in double tagging mode. Setting is don't care if no host VLAN should be used. New with R2.8 maintenance.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

sheSystemIpRouteTable 1.3.6.1.4.1.231.7.1.2.1.2.12.3
This table contains attributes for each static configured IP route. Learned routes from routing protocols will not be shown here!
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SheSystemIpRouteEntry

sheSystemIpRouteEntry 1.3.6.1.4.1.231.7.1.2.1.2.12.3.1
An entry represents a set of configurations in sheSystemIpRouteTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SheSystemIpRouteEntry  

sheSystemIpRouteIndex 1.3.6.1.4.1.231.7.1.2.1.2.12.3.1.1
Table index. Each index uniquely identifies one an Ip route table entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemIpRouteName 1.3.6.1.4.1.231.7.1.2.1.2.12.3.1.2
A describable name that uniquely identifies an entry of this table. The name is user specified. Special characters like space ? . are not allowed.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

sheSystemIpRouteDestIpAddress 1.3.6.1.4.1.231.7.1.2.1.2.12.3.1.4
Destination IpAddress for this route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheSystemIpRouteSubnetMask 1.3.6.1.4.1.231.7.1.2.1.2.12.3.1.5
subnet mask
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheSystemIpRouteGatewayIpAddress 1.3.6.1.4.1.231.7.1.2.1.2.12.3.1.6
Gateway IpAddress for this route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sheSystemIpRouteMetric 1.3.6.1.4.1.231.7.1.2.1.2.12.3.1.7
The routing metric for this route. If this metric is not used, its value should be set to -1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sheSystemIpRouteControl 1.3.6.1.4.1.231.7.1.2.1.2.12.4
OBJECT IDENTIFIER    

sheSystemIpRouteControlRequest 1.3.6.1.4.1.231.7.1.2.1.2.12.4.1
The request of a user command. createSystemIpRoute (55), sheSystemIpRouteControlName sheSystemIpRouteControlDestIpAddress sheSystemIpRouteControlGatewayIpAddress sheSystemIpRouteControlSubnetMask sheSystemIpRouteControlMetric deleteSystemIpRoute (56), sheSystemIpRouteControlIndex modifySystemIpRoute (57), sheSystemIpRouteControlIndex sheSystemIpRouteControlDestIpAddress sheSystemIpRouteControlGatewayIpAddress sheSystemIpRouteControlSubnetMask sheSystemIpRouteControlMetric
Status: current Access: read-write
OBJECT-TYPE    
  SheSystemIpControlReqType  

sheSystemIpRouteControlIndex 1.3.6.1.4.1.231.7.1.2.1.2.12.4.2
Table index
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sheSystemIpRouteControlStatus 1.3.6.1.4.1.231.7.1.2.1.2.12.4.3
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheControlStatusType  

sheSystemIpRouteControlReqResult 1.3.6.1.4.1.231.7.1.2.1.2.12.4.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SheSystemControlRequestResultType  

sheSystemIpRouteControlTimer 1.3.6.1.4.1.231.7.1.2.1.2.12.4.5
The maximum wait time for the manager for a long running user command.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sheSystemIpRouteControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.2.12.4.6
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sheSystemIpRouteControlName 1.3.6.1.4.1.231.7.1.2.1.2.12.4.7
A describable name that uniquely identifies a entry of this table. The route name is user specified.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

sheSystemIpRouteControlDestIpAddress 1.3.6.1.4.1.231.7.1.2.1.2.12.4.8
Destination Ipaddress.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheSystemIpRouteControlSubnetMask 1.3.6.1.4.1.231.7.1.2.1.2.12.4.9
Subnet mask.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheSystemIpRouteControlGatewayIpAddress 1.3.6.1.4.1.231.7.1.2.1.2.12.4.10
Gateway Ipaddress .
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sheSystemIpRouteControlMetric 1.3.6.1.4.1.231.7.1.2.1.2.12.4.11
The routing metric for this route. If this metric is not used, its value should be set to -1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sheSystemIpHostNotification 1.3.6.1.4.1.231.7.1.2.1.2.12.5
OBJECT IDENTIFIER    

sheSystemIpHostCreated 1.3.6.1.4.1.231.7.1.2.1.2.12.5.1
Configuration trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemIpHostDeleted 1.3.6.1.4.1.231.7.1.2.1.2.12.5.2
Configuration trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemIpHostModified 1.3.6.1.4.1.231.7.1.2.1.2.12.5.3
Configuration trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemIpRouteCreated 1.3.6.1.4.1.231.7.1.2.1.2.12.5.4
Configuration trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemIpRouteDeleted 1.3.6.1.4.1.231.7.1.2.1.2.12.5.5
Configuration trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemIpRouteModified 1.3.6.1.4.1.231.7.1.2.1.2.12.5.6
Configuration trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

sheSystemConformance 1.3.6.1.4.1.231.7.1.2.1.2.100
OBJECT IDENTIFIER    

sheSystemGroups 1.3.6.1.4.1.231.7.1.2.1.2.100.1
OBJECT IDENTIFIER    

sheSystemGroup 1.3.6.1.4.1.231.7.1.2.1.2.100.1.1
Status: current Access: read-write
OBJECT-GROUP    

sheSystemControlGroup 1.3.6.1.4.1.231.7.1.2.1.2.100.1.2
Status: current Access: read-write
OBJECT-GROUP    

sheSystemNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.2.100.1.3
Status: current Access: read-write
NOTIFICATION-GROUP    

sheSystemIpGroup 1.3.6.1.4.1.231.7.1.2.1.2.100.1.4
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheSystemIpNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.2.100.1.5
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheSystemObsoleteGroup 1.3.6.1.4.1.231.7.1.2.1.2.100.1.6
Description.
Status: current Access: read-write
OBJECT-GROUP    

sheSystemObsoleteNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.2.100.1.7
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

sheSystemCompliances 1.3.6.1.4.1.231.7.1.2.1.2.100.2
OBJECT IDENTIFIER    

sheSystemCompliance 1.3.6.1.4.1.231.7.1.2.1.2.100.2.1
The compliance statement for SNMP entities which manage VDSL interfaces in SHE.
Status: current Access: read-write
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor