SHIVA-SERIAL-MIB

File: SHIVA-SERIAL-MIB.mib (4951 bytes)

Imported modules

RFC1213-MIB RFC-1212 SHIVA-MIB

Imported symbols

DisplayString OBJECT-TYPE serial

Defined Types

SerialPortEntry  
SEQUENCE    
  serialPortIndex INTEGER
  serialPortName DisplayString
  serialPortStatus INTEGER
  serialPortModemName DisplayString
  serialPortAnswerInit DisplayString
  serialPortInitRate INTEGER
  serialPortInitFlow INTEGER
  serialPortSignals INTEGER
  serialPortModemType INTEGER
  serialPortInitString DisplayString

GroupEntry  
SEQUENCE    
  groupName DisplayString

Defined Values

serialPortTable 1.3.6.1.4.1.166.1.12.1
Table of serial port initialization parameters and status.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SerialPortEntry

serialPortEntry 1.3.6.1.4.1.166.1.12.1.1
initialization parameters and status for a serial port.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SerialPortEntry  

serialPortIndex 1.3.6.1.4.1.166.1.12.1.1.1
Serial port number which corresponds to an instance of rs232PortIndex.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

serialPortName 1.3.6.1.4.1.166.1.12.1.1.2
The name of this port, as used to retrieve configuration.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

serialPortStatus 1.3.6.1.4.1.166.1.12.1.1.3
Serial port status. Setting serialPortStatus to initializing(2) forces the port to be reinitialized.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), initializing(2), idle(3), packet(4), character(5)  

serialPortModemName 1.3.6.1.4.1.166.1.12.1.1.4
The name of the type of modem connected to this port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString  

serialPortAnswerInit 1.3.6.1.4.1.166.1.12.1.1.5
The initialization string to put the modem in auto-answer mode.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString  

serialPortInitRate 1.3.6.1.4.1.166.1.12.1.1.6
The rate in bits per second at which to initialize the port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

serialPortInitFlow 1.3.6.1.4.1.166.1.12.1.1.7
The flow control setting to initialize the port with.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER none(1), hardware(2), software(3)  

serialPortSignals 1.3.6.1.4.1.166.1.12.1.1.8
The current status of control signals on this port, as the sum of the following bits; 0 Ready To Send 1 Clear To Send 2 Data Set Ready 3 Data Terminal Ready 4 Ring Indicate 5 Data Carrier (Rcvd Line Signal) Detect 6 Signal Quality Detect 7 Signaling Rate Selector 8 Secondary RTS 9 Secondary CTS 10 Secondary DCD.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

serialPortModemType 1.3.6.1.4.1.166.1.12.1.1.9
Serial port modem type.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), internal(2), external(3)  

serialPortInitString 1.3.6.1.4.1.166.1.12.1.1.10
The initialization string to put the modem in dial mode.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString  

groupTable 1.3.6.1.4.1.166.1.12.2
A table of serial port group names.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GroupEntry

groupEntry 1.3.6.1.4.1.166.1.12.2.1
A serial port group name table entry.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  GroupEntry  

groupName 1.3.6.1.4.1.166.1.12.2.1.1
A serial port group name.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

numSerialSlots 1.3.6.1.4.1.166.1.12.3
Number of serial slots.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

numSerialCards 1.3.6.1.4.1.166.1.12.4
Number of serial cards.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER