SIEMENS-DUPLEXWRITE-MIB
File:
SIEMENS-DUPLEXWRITE-MIB.mib (30013 bytes)
Imported modules
Imported symbols
Defined Types
| SieDWDevice |
|
| SEQUENCE |
|
|
|
| |
sieDWDeviceID |
INTEGER |
|
| |
sieDWDevicePort |
INTEGER |
|
| |
sieDWActiveDevicePort |
INTEGER |
|
| |
sieDWPassiveDevicePort1 |
INTEGER |
|
| |
sieDWPassiveDevicePort2 |
INTEGER |
|
| |
sieDWPassiveDevicePort3 |
INTEGER |
|
| |
sieDWDevicePath |
INTEGER |
|
| |
sieDWDeviceTarget |
INTEGER |
|
| |
sieDWDeviceLun |
INTEGER |
|
| |
sieDWDeviceDisk |
INTEGER |
|
| |
sieDWDeviceSizelo |
INTEGER |
|
| |
sieDWDeviceSizehi |
INTEGER |
|
| |
sieDWDeviceSizeMBlo |
INTEGER |
|
| |
sieDWDeviceSizeMBhi |
INTEGER |
|
| |
sieDWDeviceInquiryString |
DisplayString |
|
| |
sieDWDeviceDriverName |
DisplayString |
|
| |
sieDWDuplexStatus |
INTEGER |
|
| |
sieDWDuplexReason |
INTEGER |
|
| |
sieDWDuplexNumber |
INTEGER |
|
| |
sieDWDuplexPiece |
INTEGER |
|
| |
sieDWDuplexSizelo |
INTEGER |
|
| |
sieDWDuplexSizehi |
INTEGER |
|
| |
sieDWDuplexSizeMBlo |
INTEGER |
|
| |
sieDWDuplexSizeMBhi |
INTEGER |
|
| |
sieDWDuplexRecoverProgress |
INTEGER |
|
| |
sieDWDuplexCreate |
INTEGER |
|
| |
sieDWDuplexAdd |
INTEGER |
|
| |
sieDWDuplexCopy |
INTEGER |
|
| |
sieDWDuplexDelete |
INTEGER |
|
| |
sieDWDuplexBehavior |
INTEGER |
|
| |
sieDWDuplexName |
DisplayString |
|
Defined Values
| sni |
1.3.6.1.4.1.231 |
| OBJECT IDENTIFIER |
|
|
|
| sniCommon |
1.3.6.1.4.1.231.2.10.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| sieDWStatus |
1.3.6.1.4.1.231.2.10.2.2.8.2 |
| OBJECT IDENTIFIER |
|
|
|
| sieDWAgentId |
1.3.6.1.4.1.231.2.10.2.2.8.1.1 |
| DuplexWrite SNMP agent ID string |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sieDWAgentBuild |
1.3.6.1.4.1.231.2.10.2.2.8.1.4 |
| DuplexWrite SNMP agent build date and time string |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sieDWLastDate |
1.3.6.1.4.1.231.2.10.2.2.8.2.1 |
| Date of last recent reconfiguration in time_t (seconds since 1/1/1970 00:00:00) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWCurrentStatus |
1.3.6.1.4.1.231.2.10.2.2.8.2.2 |
| This reflects the overall status of the driver, agent and the underlying ports.
Possible values are:
OK everything is fine
DEGRADED there was an event from the driver marking a change of DuplexWrite configuration or port status
ERROR software exception (software bug)
FAILED communication with driver fails (bug, driver not installed) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ok(1), degraded(2), error(3), failed(4) |
|
| sieDWRefresh |
1.3.6.1.4.1.231.2.10.2.2.8.2.3 |
| Command to refresh the data the agent is maintaining |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), inquiry(1), rescan(2) |
|
| sieDWClusterPartner |
1.3.6.1.4.1.231.2.10.2.2.8.2.4 |
| If node is in a cluster this is the partner node |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sieDWDeviceTable |
1.3.6.1.4.1.231.2.10.2.2.8.3.1 |
| Table of all devices DuplexWrite can detect |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SieDWDevice |
|
| sieDWDevice |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1 |
| Entry in table of DuplexWrite devices |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SieDWDevice |
|
|
| sieDWDeviceID |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.1 |
| A unique value for each device, starts at 0 and
remains unchanged from one re-initialization of
the agent to the next |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDevicePort |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.2 |
| The SCSI port number where this device is attached |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWActiveDevicePort |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.3 |
| The SCSI port number where this device is attached, when MultiPath
is installed this is the active port |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWPassiveDevicePort1 |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.4 |
| When MultiPath is installed this is the SCSI port number of the first
passive port where this device is attached |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWPassiveDevicePort2 |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.5 |
| When MultiPath is installed this is the SCSI port number of the second
passive port where this device is attached |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWPassiveDevicePort3 |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.6 |
| When MultiPath is installed this is the SCSI port number of the third
passive port where this device is attached |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDevicePath |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.7 |
| The SCSI path number (should be bus number) where this
device is attached |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDeviceTarget |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.8 |
| The SCSI target ID of this device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDeviceLun |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.9 |
| The SCSI lun of this device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDeviceDisk |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.10 |
| The operating system's internal number for this device; e.g.
NT: disk 2 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDeviceSizelo |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.11 |
| Size of the device in blocks (low part) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDeviceSizehi |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.12 |
| Size of the device in blocks (high part) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDeviceSizeMBlo |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.13 |
| Size of the device in MB (low part) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDeviceSizeMBhi |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.14 |
| Size of the device in MB (high part) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDeviceDriverName |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.16 |
| The name of the operating system's driver that handles
the device |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sieDWDuplexStatus |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.17 |
| The status of the DW group where this device is part of:
online: the device is in perfect order (GET/SET)
error: the device had a fault (GET/SET)
recover: the device is working on a catch-up (GET)
disable: stop operation of this device (GET/SET)
simplex: simple SCSI device (GET)
na: not available as DuplexDisk piece (GET)
preferred: piece used for read (GET)
multipath: disk not accessible (MultiPath) (GET)
cluster: disk on other cluster node (GET)
missing: one disk of the DW group is missing (GET)
The highest 8 bit of the value are used for additional
status information:
Bit field: Bit 0 - most recent
Bit 1 - root
Bit 2 - force active
Bit 3 - hotspare
Bit 4 - broken
Bit 5 - reserved
...
Bit 7 - reserved |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
online(1), error(2), recover(3), disable(4), simplex(5), na(6), preferred(7), multipath(8), cluster(9), missing(10) |
|
| sieDWDuplexReason |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.18 |
| The reason for an error of the DW group where this device
is part of |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexNumber |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.19 |
| The DW internal number of the DW group where this device
is part of |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexPiece |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.20 |
| The internal number this device has inside its DW group |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexSizelo |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.21 |
| The size of the DW group in blocks where this device is part of (low part) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexSizehi |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.22 |
| The size of the DW group in blocks where this device is part of (high part) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexSizeMBlo |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.23 |
| The size of the DW group in MB where this device is part of (low part) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexSizeMBhi |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.24 |
| The size of the DW group in MB where this device is part of (high part) |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexRecoverProgress |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.25 |
| The progress in percent of a recovery of the DW group where
this device is part of |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexCreate |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.26 |
| Command to create a DW group with this device |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexAdd |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.27 |
| Command to add device to the DW group with this device |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexCopy |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.28 |
| Command to recover (catchup) device inside its DW group |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexDelete |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.29 |
| Command to delete this device from its DW group - if it's the last device
of its group the group is destroyed |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWDuplexBehavior |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.30 |
| Command to include/exclude this device from being used by DW;
Command to set this device as preferred device in this DW for reading |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
include(1), exclude(2), prefer(3) |
|
| sieDWDuplexName |
1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.31 |
| The DW internal name of the DW group where this device
is part of |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sieDWTrapServerName |
1.3.6.1.4.1.231.2.10.2.2.8.10.1 |
| Name of the server where the trap occured |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| sieDWTrapTime |
1.3.6.1.4.1.231.2.10.2.2.8.10.2 |
| Time the trap occured (in seconds since 1/1/1970 00:00:00) |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWTrapGroupID |
1.3.6.1.4.1.231.2.10.2.2.8.10.3 |
| The DuplexWrite Group ID where the change occured |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWTrapPortID |
1.3.6.1.4.1.231.2.10.2.2.8.10.4 |
| The DuplexWrite Port ID where the change occured |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWTrapPathID |
1.3.6.1.4.1.231.2.10.2.2.8.10.5 |
| The DuplexWrite Path ID where the change occured |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWTrapTargetID |
1.3.6.1.4.1.231.2.10.2.2.8.10.6 |
| The DuplexWrite Target ID where the change occured |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWTrapLunID |
1.3.6.1.4.1.231.2.10.2.2.8.10.7 |
| The DuplexWrite Lun ID where the change occured |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWTrapError |
1.3.6.1.4.1.231.2.10.2.2.8.10.8 |
| The DuplexWrite error code for certain traps |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| sieDWNewConfig |
1300 |
| Trap occurs after the driver has created a new DuplexWrite group or has added a device to an existing DuplexWrite group as requested by the configuration utility. |
| TRAP-TYPE |
|
|
|
| sieDWPieceRemoved |
1301 |
| Trap occurs after the driver has removed a device from a DuplexWrite group. The action was requested by the configuration utility. |
| TRAP-TYPE |
|
|
|
| sieDWConfigRemoved |
1302 |
| Trap occurs after the driver has removed a DuplexWrite group. The action was requested by the configuration utility. |
| TRAP-TYPE |
|
|
|
| sieDWStatusSet |
1303 |
| Trap occurs after the driver has set the status of a DuplexWrite group. The action was requested by the configuration utility. |
| TRAP-TYPE |
|
|
|
| sieDWUpdateStatus |
1304 |
| Trap occurs after the driver has updated the status of a DuplexWrite group. |
| TRAP-TYPE |
|
|
|
| sieDWPieceRecovered |
1305 |
| Trap occurs after the driver has sucessfully recovered a DuplexWrite group as requested by the configuration utility. Both pieces are ONLINE. |
| TRAP-TYPE |
|
|
|
| sieDWRecoverAborted |
1306 |
| Trap occurs after the driver has aborted the recovery process of a DuplexWrite group as requested by the configuration utility. |
| TRAP-TYPE |
|
|
|
| sieDWReservationConflict |
1307 |
| Trap occurs after the driver has detected a reservation conflict. A whole DuplexWrite group is not accessible from now on. This is only an error if it happens during operation (not initialization) of this group. |
| TRAP-TYPE |
|
|
|
| sieDWConfigChanged |
1308 |
| Trap occurs after the driver has done a rescan/reread and found a new configuration. |
| TRAP-TYPE |
|
|
|
| sieDWConfigInvalidated |
1309 |
| Trap occurs after the driver has invalidated the configuration information for a device as requested by the DuplexWrite cluster service. The configuration information is reread before the next access of the device on this cluster element. |
| TRAP-TYPE |
|
|
|
| sieDWActiveLunChanged |
1310 |
| Trap occurs after the driver has changed the path for read commands to a specified device of a DuplexWrite group. |
| TRAP-TYPE |
|
|
|
| sieDWPieceFailed |
1311 |
| Trap occurs after the driver has detected an error on one of the devices of a DuplexWrite group. |
| TRAP-TYPE |
|
|
|
| sieDWRootFlagChanged |
1312 |
| Trap occurs after the driver has changed the root behavior of a DuplexWrite group. |
| TRAP-TYPE |
|
|
|
| sieDWNameChanged |
1313 |
| Trap occurs after the driver has changed the name of a DuplexWrite group. |
| TRAP-TYPE |
|
|
|
| sieDWForceActive |
1314 |
| Trap occurs after the driver has marked a disk of a DuplexWrite group forced active at next boot. The partner disk can be used for a snapshot. |
| TRAP-TYPE |
|
|
|
| sieDWRefreshFinished |
1350 |
| Trap occurs after the driver interface has updated the internal data structures. |
| TRAP-TYPE |
|
|
|
| sieDWDiskRegistered |
1351 |
| Trap occurs after the driver interface has modified the registry so that after the next reboot a disk is registered/unregistered. |
| TRAP-TYPE |
|
|
|