SIEMENS-PN-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	RFC1155-SMI
SNMPv2-CONF

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Counter32	Integer32	TEXTUAL-CONVENTION
DisplayString	RowStatus	TestAndIncr
enterprises	OBJECT-GROUP

Defined Types

DiscoveryStates
INTEGER	done(1), error(2), busy(3), finok(4), finerr(5), kill(6), masterDone(11), masterError(12), masterBusy(13), masterFinok(14), masterFinerr(15), errdelDone(21), errdelError(22), errdelBusy(23), errdelFinok(24), errdelFinerr(25)

DiscoveryModes
INTEGER	man(1), auto(2), undef(9)

AlarmFilterStates
INTEGER	filterOn(1), filterOff(2)

AlarmPriorities
INTEGER	minor(1), major(2), device(3)

HicomSysEntry
SEQUENCE
	hicomSysPabxId	Integer32
	hicomSysConNo	DisplayString
	hicomSysEstabl	Integer32
	hicomSysPosNo	DisplayString
	hicomSysMnemonic	DisplayString
	hicomSysCustName	DisplayString
	hicomSysCbCode	DisplayString
	hicomSysTelNo	DisplayString
	hicomSysCutOver	DisplayString
	hicomSysPabxNo	DisplayString
	hicomSysClnr	DisplayString
	hicomSysLocation	DisplayString
	hicomSysRemark	DisplayString
	hicomSysSwLic	DisplayString
	hicomSysSysType	DisplayString
	hicomSysApsPa	DisplayString
	hicomSysTimeStamp	Integer32
	hicomSysDescription	DisplayString
	hicomSysVersion	DisplayString
	hicomSysCustomerSpecific	DisplayString
	hicomSysStreetAddress	DisplayString
	hicomSysLineType	DisplayString
	hicomSysProduct	DisplayString
	hicomSysCustomerContact	DisplayString
	hicomSysServiceDistrict	DisplayString
	hicomSysCustomerContract	DisplayString
	hicomSysTimeOfLastFm	Integer32
	hicomSysHicomSwVersion	DisplayString
	hicomSysEndWarranty	DisplayString
	hicomSysBatteryType	DisplayString
	hicomSysBatteryCapac	DisplayString
	hicomSysInterface	DisplayString
	hicomSysSystemRoomTel	DisplayString
	hicomSysNoType	DisplayString
	hicomSysCustServer	DisplayString
	hicomSysCustNoid	DisplayString
	hicomSysNoName	DisplayString
	hicomSysRemarkCd	DisplayString
	hicomSysHSystemRelease	DisplayString
	hicomSysHcmAmolang	DisplayString
	hicomSysRemarkCon	DisplayString
	hicomSysIpAddress	DisplayString
	hicomSysRemarkCom	DisplayString
	hicomSysMsvProgNum	Integer32
	hicomSysMsvRegNum	Integer32
	hicomSysHcEquipNr1	DisplayString
	hicomSysHcEquipNr2	DisplayString
	hicomSysDaUrl	DisplayString
	hicomSysHcmCorrState	DisplayString
	hicomSysNodeNo	Integer32
	hicomSysLang	INTEGER
	hicomSysMgrNetId	OCTET STRING
	hicomSysMgrSubNetId	OCTET STRING
	hicomSysMgrPhysNetId	OCTET STRING
	hicomSysMgrFlags	Integer32
	hicomSysDiscTimeOutEvnt	INTEGER
	hicomSysDiscAgedData	INTEGER
	hicomSysDiscComType	INTEGER
	hicomSysAgentFlags	Integer32

HicomForeignSysEntry
SEQUENCE
	hicomForSysPhysNetId	OCTET STRING
	hicomForSysNodeNo	Integer32
	hicomForSysName	OCTET STRING
	hicomForSysNetId	OCTET STRING
	hicomForSysSubNetId	OCTET STRING
	hicomForSysProvNetId	OCTET STRING
	hicomForSysProvSubNetId	OCTET STRING
	hicomForSysRowStat	RowStatus

HicomAlEntry
SEQUENCE
	hicomAlFilter	AlarmFilterStates
	hicomAlStatus	INTEGER
	hicomAlPabxId	Integer32
	hicomAlGroup	Integer32
	hicomAlSubId	Integer32
	hicomAlPriority	AlarmPriorities
	hicomAlAbsMod	DisplayString
	hicomAlTimDat	Integer32
	hicomAlName	DisplayString
	hicomAlReset	INTEGER
	hicomAlTimOldDat	Integer32
	hicomAlArrivalTimDat	Integer32

HicomAlFiltConfEntry
SEQUENCE
	hicomAlFiltConfPabxId	Integer32
	hicomAlFiltConfGroup	Integer32
	hicomAlFiltConfSubId	Integer32
	hicomAlFiltConfPriority	AlarmPriorities
	hicomAlFiltConfSwitch	AlarmFilterStates
	hicomAlFiltConfRowStat	RowStatus

HicomAlMirrorUploadEntry
SEQUENCE
	hicomAlMirrorUploadPabxId	Integer32
	hicomAlMirrorUploadMnemonic	DisplayString
	hicomAlMirrorUploadState	INTEGER
	hicomAlMirrorUploadStartTimDat	DisplayString
	hicomAlMirrorUploadErrorTimDat	DisplayString

HicomErrorEntry
SEQUENCE
	hicomErrorPabxId	Integer32
	hicomErrorAlGroup	Integer32
	hicomErrorAlSubId	Integer32
	hicomErrorSerialNo	Integer32
	hicomErrorMsgId	DisplayString
	hicomErrorPriority	DisplayString
	hicomErrorAction	DisplayString
	hicomErrorAbsMod	DisplayString
	hicomErrorEvent	DisplayString
	hicomErrorSubevent	DisplayString
	hicomErrorCardRef	DisplayString
	hicomErrorBoardVersion	DisplayString
	hicomErrorFwType	DisplayString
	hicomErrorTimDat	Integer32
	hicomErrorOrigText	DisplayString

HicomAlConfEntry
SEQUENCE
	hicomAlConfPabxId	Integer32
	hicomAlConfAlGroup	Integer32
	hicomAlConfAlSubId	Integer32
	hicomAlConfName	DisplayString
	hicomAlConfThreshold1	Integer32
	hicomAlConfThreshold2	Integer32
	hicomAlConfTime1	Integer32
	hicomAlConfTime2	Integer32
	hicomAlConfTimeH	Integer32
	hicomAlConfBase	Integer32

HicomAlConfPersonEntry
SEQUENCE
	hicomAlConfPersonPabxId	Integer32
	hicomAlConfPersonAlGroup	Integer32
	hicomAlConfPersonAlSubId	Integer32
	hicomAlConfPersonExtNo	DisplayString

HicomAlConfTargetEntry
SEQUENCE
	hicomAlConfTargetPabxId	Integer32
	hicomAlConfTargetAlGroup	Integer32
	hicomAlConfTargetAlSubId	Integer32
	hicomAlConfTargetLtg	Integer32
	hicomAlConfTargetLtu	Integer32
	hicomAlConfTargetSlot	Integer32
	hicomAlConfTargetTrunkNo	Integer32

HicomAlConfDiscovEntry
SEQUENCE
	hicomAlConfDiscovPabxId	Integer32
	hicomAlConfDiscovPabxMnemonic	DisplayString
	hicomAlConfDiscovStatus	DiscoveryStates
	hicomAlConfDiscovMode	DiscoveryModes
	hicomAlConfDiscovTimDat	DisplayString
	hicomAlConfDiscovErrTimDat	DisplayString

HicomSoftApsEntry
SEQUENCE
	hicomSoftApsPabxId	Integer32
	hicomSoftApsID	OCTET STRING
	hicomSoftApsPartNo	DisplayString

HicomSoftPatchEntry
SEQUENCE
	hicomSoftPatchPabxId	Integer32
	hicomSoftPatchNo	OCTET STRING
	hicomSoftPatchHWMod	DisplayString
	hicomSoftPatchActType	DisplayString
	hicomSoftPatchGroup	DisplayString

HicomSoftDiscovEntry
SEQUENCE
	hicomSoftDiscovPabxId	Integer32
	hicomSoftDiscovPabxMnemonic	DisplayString
	hicomSoftDiscovStatus	DiscoveryStates
	hicomSoftDiscovMode	DiscoveryModes
	hicomSoftDiscovTimDat	DisplayString
	hicomSoftDiscovErrTimDat	DisplayString

HicomCabEntry
SEQUENCE
	hicomCabPabxId	Integer32
	hicomCabAddr	OCTET STRING
	hicomCabType	DisplayString
	hicomCabPartNo	DisplayString
	hicomCabNumShelves	Integer32

HicomFrameEntry
SEQUENCE
	hicomFramePabxId	Integer32
	hicomFrameCabAddr	OCTET STRING
	hicomFrameMntLevel	Integer32
	hicomFrameType	DisplayString
	hicomFramePartNo	DisplayString
	hicomFramePID1	DisplayString
	hicomFramePID2	DisplayString
	hicomFramePID3	DisplayString
	hicomFrameLTU	Integer32
	hicomFrameIpAddr	DisplayString

HicomPeriphEntry
SEQUENCE
	hicomPeriphPabxId	Integer32
	hicomPeriphContrID	Integer32
	hicomPeriphModule	OCTET STRING
	hicomPeriphType	DisplayString
	hicomPeriphSSNo	DisplayString
	hicomPeriphSize	Integer32
	hicomPeriphGran	Integer32

HicomCDSMEntry
SEQUENCE
	hicomCDSMPabxId	Integer32
	hicomCDSMCabAddr	OCTET STRING
	hicomCDSMMntLevel	Integer32
	hicomCDSMSlotAddr	Integer32
	hicomCDSMPartNo	DisplayString
	hicomCDSMCode	DisplayString
	hicomCDSMVers	Integer32
	hicomCDSMFirmware	DisplayString

HicomCDSUEntry
SEQUENCE
	hicomCDSUPabxId	Integer32
	hicomCDSUCabAddr	OCTET STRING
	hicomCDSUMntLevel	Integer32
	hicomCDSUSlotAddr	Integer32
	hicomCDSUPartNo	DisplayString
	hicomCDSUCode	DisplayString
	hicomCDSUVers	Integer32
	hicomCDSUFirmware	DisplayString

HicomBCSMEntry
SEQUENCE
	hicomBCSMPabxId	Integer32
	hicomBCSMMod	OCTET STRING
	hicomBCSMSlotAddr	Integer32
	hicomBCSMConfBoard	DisplayString
	hicomBCSMCode	DisplayString
	hicomBCSMInstBoard	DisplayString
	hicomBCSMVers	Integer32
	hicomBCSMFirmware	DisplayString
	hicomBCSMStatus	DisplayString

HicomBCSUEntry
SEQUENCE
	hicomBCSUPabxId	Integer32
	hicomBCSULTG	Integer32
	hicomBCSULTU	Integer32
	hicomBCSUSlotAddr	Integer32
	hicomBCSUConfBoard	DisplayString
	hicomBCSUCode	DisplayString
	hicomBCSUInstBoard	DisplayString
	hicomBCSUVers	Integer32
	hicomBCSUFirmware	DisplayString
	hicomBCSUStatus	DisplayString

HicomHWDiscovEntry
SEQUENCE
	hicomHWDiscovPabxId	Integer32
	hicomHWDiscovPabxMnemonic	DisplayString
	hicomHWDiscovStatus	DiscoveryStates
	hicomHWDiscovMode	DiscoveryModes
	hicomHWDiscovTimDat	DisplayString
	hicomHWDiscovErrTimDat	DisplayString

TrunkTypes
INTEGER	undef(1), analog(2), digital(3), special(4)

HicomTrunkGrpEntry
SEQUENCE
	hicomTrunkGrpPabxId	Integer32
	hicomTrunkGrpNo	Integer32
	hicomTrunkGrpNNodeNo	Integer32
	hicomTrunkGrpVNodeNo	Integer32
	hicomTrunkGrpTrunkType	TrunkTypes
	hicomTrunkGrpMaxNo	Integer32
	hicomTrunkGrpName	DisplayString
	hicomTrunkGrpDevice	DisplayString
	hicomTrunkGrpAlarms	OCTET STRING

HicomTrunkEntry
SEQUENCE
	hicomTrunkPabxId	Integer32
	hicomTrunkType	TrunkTypes
	hicomTrunkTrunkGrpNo	Integer32
	hicomTrunkLtg	Integer32
	hicomTrunkLtu	Integer32
	hicomTrunkSlot	Integer32
	hicomTrunkNo	Integer32
	hicomTrunkChannelGrp	Integer32
	hicomTrunkSNodeNo	Integer32
	hicomTrunkStatOp	INTEGER
	hicomTrunkAlSubId	Integer32
	hicomTrunkChannels	OCTET STRING
	hicomTrunkDevice	DisplayString
	hicomTrunkName	DisplayString

HicomKntopEntry
SEQUENCE
	hicomKntopPabxId	Integer32
	hicomKntopLtg	Integer32
	hicomKntopLtu	Integer32
	hicomKntopSlot	Integer32
	hicomKntopSatznr	Integer32
	hicomKntopBKanalGrp	Integer32
	hicomKntopPNodeIndex	Integer32
	hicomKntopPLtg	Integer32
	hicomKntopPLtu	Integer32
	hicomKntopPSlot	Integer32
	hicomKntopPSatznr	Integer32
	hicomKntopPBKanalGrp	Integer32
	hicomKntopPNodeNo	Integer32
	hicomKntopBunr	Integer32

HicomTopoDiscovEntry
SEQUENCE
	hicomTopoDiscovPabxId	Integer32
	hicomTopoDiscovPabxMnemonic	DisplayString
	hicomTopoDiscovStatus	DiscoveryStates
	hicomTopoDiscovMode	DiscoveryModes
	hicomTopoDiscovTimDat	DisplayString
	hicomTopoDiscovErrTimDat	DisplayString

HicomSQLsessionEntry
SEQUENCE
	hicomSQLsessionId	Integer32
	hicomSQLsessionState	INTEGER
	hicomSQLsessionStatement	Integer32
	hicomSQLsessionWhereClause	DisplayString
	hicomSQLsessionTimeout	INTEGER
	hicomSQLsessionResultSize	Integer32
	hicomSQLsessionResultNoLines	Integer32

HicomSQLresultEntry
SEQUENCE
	hicomSQLresultId	Integer32
	hicomSQLresultBlockNo	Integer32
	hicomSQLresultData	DisplayString

HicomDiscovEntry
SEQUENCE
	hicomDiscovPabxId	Integer32
	hicomDiscovPabxMnemonic	DisplayString
	hicomDiscovStatus	DiscoveryStates
	hicomDiscovMode	DiscoveryModes
	hicomDiscovTimDat	DisplayString
	hicomDiscovErrTimDat	DisplayString

Defined Values

hicomMib		1.3.6.1.4.1.231.7.2.1
This is the MIB for Siemens 300 Hicom PBX and UNITY systems. It includes topology and system management, alarm management and hard/software management.
MODULE-IDENTITY

sni		1.3.6.1.4.1.231
OBJECT IDENTIFIER

siemensUnits		1.3.6.1.4.1.231.7
OBJECT IDENTIFIER

pn		1.3.6.1.4.1.231.7.2
OBJECT IDENTIFIER

hicomControl		1.3.6.1.4.1.231.7.2.1.0
OBJECT IDENTIFIER

hicomSystem		1.3.6.1.4.1.231.7.2.1.1
OBJECT IDENTIFIER

hicomAlarms		1.3.6.1.4.1.231.7.2.1.2
OBJECT IDENTIFIER

hicomErrors		1.3.6.1.4.1.231.7.2.1.3
OBJECT IDENTIFIER

hicomAlConf		1.3.6.1.4.1.231.7.2.1.4
OBJECT IDENTIFIER

hicomSoft		1.3.6.1.4.1.231.7.2.1.5
OBJECT IDENTIFIER

hicomHard		1.3.6.1.4.1.231.7.2.1.6
OBJECT IDENTIFIER

hicomTopo		1.3.6.1.4.1.231.7.2.1.7
OBJECT IDENTIFIER

hicomSQL		1.3.6.1.4.1.231.7.2.1.8
OBJECT IDENTIFIER

hicomDiscov		1.3.6.1.4.1.231.7.2.1.9
OBJECT IDENTIFIER

hicomMibConformance		1.3.6.1.4.1.231.7.2.1.20
OBJECT IDENTIFIER

hicomTrapGroup		1.3.6.1.4.1.231.7.2.1.21
OBJECT IDENTIFIER

hicomTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1
OBJECT IDENTIFIER

hicomTraps		1.3.6.1.4.1.231.7.2.1.21.2
OBJECT IDENTIFIER

hicomSystemTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1.1
OBJECT IDENTIFIER

hicomAlarmTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1.2
OBJECT IDENTIFIER

hicomErrorTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1.3
OBJECT IDENTIFIER

hicomSWTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1.4
OBJECT IDENTIFIER

hicomAlConfTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1.5
OBJECT IDENTIFIER

hicomHWTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1.6
OBJECT IDENTIFIER

hicomTopoTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1.7
OBJECT IDENTIFIER

hicomSQLTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1.8
OBJECT IDENTIFIER

hicomDiscTrapVariables		1.3.6.1.4.1.231.7.2.1.21.1.9
OBJECT IDENTIFIER

hicomSystemTraps		1.3.6.1.4.1.231.7.2.1.21.2.1
OBJECT IDENTIFIER

hicomAlarmTraps		1.3.6.1.4.1.231.7.2.1.21.2.2
OBJECT IDENTIFIER

hicomErrorTraps		1.3.6.1.4.1.231.7.2.1.21.2.3
OBJECT IDENTIFIER

hicomAlConfTraps		1.3.6.1.4.1.231.7.2.1.21.2.4
OBJECT IDENTIFIER

hicomSWTraps		1.3.6.1.4.1.231.7.2.1.21.2.5
OBJECT IDENTIFIER

hicomHWTraps		1.3.6.1.4.1.231.7.2.1.21.2.6
OBJECT IDENTIFIER

hicomTopoTraps		1.3.6.1.4.1.231.7.2.1.21.2.7
OBJECT IDENTIFIER

hicomSQLTraps		1.3.6.1.4.1.231.7.2.1.21.2.8
OBJECT IDENTIFIER

hicomDiscTraps		1.3.6.1.4.1.231.7.2.1.21.2.9
OBJECT IDENTIFIER

hicomMibGroups		1.3.6.1.4.1.231.7.2.1.20.1
OBJECT IDENTIFIER

hicomCntrlTree		1.3.6.1.4.1.231.7.2.1.20.1.0
OBJECT IDENTIFIER

hicomSysTree		1.3.6.1.4.1.231.7.2.1.20.1.1
OBJECT IDENTIFIER

hicomAlarmTree		1.3.6.1.4.1.231.7.2.1.20.1.2
OBJECT IDENTIFIER

hicomErrorTree		1.3.6.1.4.1.231.7.2.1.20.1.3
OBJECT IDENTIFIER

hicomAlConfTree		1.3.6.1.4.1.231.7.2.1.20.1.4
OBJECT IDENTIFIER

hicomSoftTree		1.3.6.1.4.1.231.7.2.1.20.1.5
OBJECT IDENTIFIER

hicomHardTree		1.3.6.1.4.1.231.7.2.1.20.1.6
OBJECT IDENTIFIER

hicomTopoTree		1.3.6.1.4.1.231.7.2.1.20.1.7
OBJECT IDENTIFIER

hicomSQLtree		1.3.6.1.4.1.231.7.2.1.20.1.8
OBJECT IDENTIFIER

hicomDiscovTree		1.3.6.1.4.1.231.7.2.1.20.1.9
OBJECT IDENTIFIER

hicomProxyName		1.3.6.1.4.1.231.7.2.1.0.1
Name of the Hicom proxy agent.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAgentVersion		1.3.6.1.4.1.231.7.2.1.0.2
Version of the Hicom proxy agent.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomMIBVersion		1.3.6.1.4.1.231.7.2.1.0.3
MIB Version of the Hicom proxy agent.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomControlGroup		1.3.6.1.4.1.231.7.2.1.20.1.0.1
Conformance statement of the hicomControlGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomNumHicoms		1.3.6.1.4.1.231.7.2.1.1.1
The number of Hicom systems managed by this agent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSystemChanges		1.3.6.1.4.1.231.7.2.1.1.2
When a change (SET) is made on hicomSysTable or hicomForeignSysTable, the variable is incremented by one.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hicomSysTable		1.3.6.1.4.1.231.7.2.1.1.3
The table of Hicom systems.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomSysEntry

hicomSysEntry		1.3.6.1.4.1.231.7.2.1.1.3.1
Each entry describes a Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomSysEntry

hicomSysPabxId		1.3.6.1.4.1.231.7.2.1.1.3.1.1
Unique identifier of a Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSysConNo		1.3.6.1.4.1.231.7.2.1.1.3.1.2
Customer contract number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysEstabl		1.3.6.1.4.1.231.7.2.1.1.3.1.3
Contract (2.-3.)
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSysPosNo		1.3.6.1.4.1.231.7.2.1.1.3.1.4
Contract (10.-14)
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysMnemonic		1.3.6.1.4.1.231.7.2.1.1.3.1.5
Mnemonic name of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysCustName		1.3.6.1.4.1.231.7.2.1.1.3.1.6
Name of the service technician.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysCbCode		1.3.6.1.4.1.231.7.2.1.1.3.1.7
Call back
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysTelNo		1.3.6.1.4.1.231.7.2.1.1.3.1.8
Call number of the customer.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysCutOver		1.3.6.1.4.1.231.7.2.1.1.3.1.9
CutOver date for Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysClnr		1.3.6.1.4.1.231.7.2.1.1.3.1.11
Call number of the Hicom service.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysPabxNo		1.3.6.1.4.1.231.7.2.1.1.3.1.12
Chdmain pabx-no field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysLocation		1.3.6.1.4.1.231.7.2.1.1.3.1.13
Location of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysRemark		1.3.6.1.4.1.231.7.2.1.1.3.1.14
Optional remarks.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysSwLic		1.3.6.1.4.1.231.7.2.1.1.3.1.15
Software licence number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysSysType		1.3.6.1.4.1.231.7.2.1.1.3.1.16
Type of equipment.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysApsPa		1.3.6.1.4.1.231.7.2.1.1.3.1.17
Chdmain aps-pa field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysTimeStamp		1.3.6.1.4.1.231.7.2.1.1.3.1.26
Chdmain timstamp field.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSysDescription		1.3.6.1.4.1.231.7.2.1.1.3.1.34
Chdmain longname field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysVersion		1.3.6.1.4.1.231.7.2.1.1.3.1.39
Installed version of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysCustomerSpecific		1.3.6.1.4.1.231.7.2.1.1.3.1.44
Chdmain customer-specific field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysStreetAddress		1.3.6.1.4.1.231.7.2.1.1.3.1.45
Chdmain street-address field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysLineType		1.3.6.1.4.1.231.7.2.1.1.3.1.46
Chdmain line-type field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysProduct		1.3.6.1.4.1.231.7.2.1.1.3.1.48
Chdmain product field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysCustomerContact		1.3.6.1.4.1.231.7.2.1.1.3.1.49
Chdmain customer-contact field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysServiceDistrict		1.3.6.1.4.1.231.7.2.1.1.3.1.50
Chdmain service-district field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysCustomerContract		1.3.6.1.4.1.231.7.2.1.1.3.1.51
Chdmain customer-contract field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysTimeOfLastFm		1.3.6.1.4.1.231.7.2.1.1.3.1.53
Chdmain time-of-last-fm field.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSysHicomSwVersion		1.3.6.1.4.1.231.7.2.1.1.3.1.55
Chdmain hicom-sw-version field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysEndWarranty		1.3.6.1.4.1.231.7.2.1.1.3.1.58
Chdmain end-warranty field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysBatteryType		1.3.6.1.4.1.231.7.2.1.1.3.1.61
Chdmain battery-type field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysBatteryCapac		1.3.6.1.4.1.231.7.2.1.1.3.1.62
Chdmain battery-capacity field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysInterface		1.3.6.1.4.1.231.7.2.1.1.3.1.63
Chdmain interface field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysSystemRoomTel		1.3.6.1.4.1.231.7.2.1.1.3.1.64
Chdmain system-room-tel field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysNoType		1.3.6.1.4.1.231.7.2.1.1.3.1.71
Network Object icon default display name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysCustServer		1.3.6.1.4.1.231.7.2.1.1.3.1.72
Network Object ID (mnemonic) of the Network Manager Unity A&S server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysCustNoid		1.3.6.1.4.1.231.7.2.1.1.3.1.73
NOId (mnemonic) of the uploaded NO (H300) in customer server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysNoName		1.3.6.1.4.1.231.7.2.1.1.3.1.74
Network Object icon default display name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysRemarkCd		1.3.6.1.4.1.231.7.2.1.1.3.1.75
remarks to customer data.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysHSystemRelease		1.3.6.1.4.1.231.7.2.1.1.3.1.76
Sachnummer of resident SWU (switching unit) APS (Anlagen Programm System).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysHcmAmolang		1.3.6.1.4.1.231.7.2.1.1.3.1.77
AMO language 1=de 2=en .
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysRemarkCon		1.3.6.1.4.1.231.7.2.1.1.3.1.78
Remarks to contract data.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysIpAddress		1.3.6.1.4.1.231.7.2.1.1.3.1.79
IP address or DNS entry of Hicom/Network Object.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysRemarkCom		1.3.6.1.4.1.231.7.2.1.1.3.1.80
Remarks to communication.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysMsvProgNum		1.3.6.1.4.1.231.7.2.1.1.3.1.81
This Hicom number is needed for MSVx connectivity over dial up or leased lines, generated.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSysMsvRegNum		1.3.6.1.4.1.231.7.2.1.1.3.1.82
This region number is needed for MSVx connectivity over dial up or leased lines, generated (Teilnetz Id).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSysHcEquipNr1		1.3.6.1.4.1.231.7.2.1.1.3.1.83
First part of the hicom equipment number, SP(Systemprogramm) Sachnummer 1.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysHcEquipNr2		1.3.6.1.4.1.231.7.2.1.1.3.1.84
Secon part of the hicom equipment number, SP(Systemprogramm) Sachnummmer 2.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysDaUrl		1.3.6.1.4.1.231.7.2.1.1.3.1.85
URL for Web based DA application.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysHcmCorrState		1.3.6.1.4.1.231.7.2.1.1.3.1.86
Correction State of the Hicom (Patches/APS).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSysNodeNo		1.3.6.1.4.1.231.7.2.1.1.3.1.100
Node number of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSysLang		1.3.6.1.4.1.231.7.2.1.1.3.1.101
Configured system language.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	undef(1), german(2), english(3)

hicomSysMgrNetId		1.3.6.1.4.1.231.7.2.1.1.3.1.102
Identifier of the customer network. The field is set and maintained by the manager application.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hicomSysMgrSubNetId		1.3.6.1.4.1.231.7.2.1.1.3.1.103
Identifier of the customer's sub-network. The field is set and maintained by the manager application.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hicomSysMgrPhysNetId		1.3.6.1.4.1.231.7.2.1.1.3.1.104
Identifier of a customer's physical network. The field is set and maintained by the manager application.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hicomSysMgrFlags		1.3.6.1.4.1.231.7.2.1.1.3.1.105
Private flags of manager application. The field is set and maintained by the manager application.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hicomSysDiscTimeOutEvnt		1.3.6.1.4.1.231.7.2.1.1.3.1.106
Acceptable maximum time interval (unit is hours) not getting an event from the hicom system. E1: (DiscTimeOutEvnt < t1 - t2) t1 = current Time t2 = Time of last Event If the expression E1 becomes true a discovery operation will started for the hicom. DiscTimeOutEvnt shall be set greater or equal to 24 hours. The field is set and maintained by the manager application.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	24..65535

hicomSysDiscAgedData		1.3.6.1.4.1.231.7.2.1.1.3.1.107
Acceptable maximum time interval (unit is hours) since last discovery date and current event date. E2: (DiscAgedData < t1 - t2) t1 = current Event Time t2 = time last discovery succeeded If the expression E2 becomes true a discovery operation will started for the hicom. DiscAgedData shall be set greater or equal to 168 hours (7 days). The field is set and maintained by the manager application.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	168..65535

hicomSysDiscComType		1.3.6.1.4.1.231.7.2.1.1.3.1.108
Identifies the communication interface between DMS and Hicom.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	addBatchJob(1), online(2)

hicomSysAgentFlags		1.3.6.1.4.1.231.7.2.1.1.3.1.109
Private flags of the Agent. The field is set and maintained by the manager/agent application.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hicomSysSubagentLastMsgNo		1.3.6.1.4.1.231.7.2.1.1.4
The last message, warning or error number issued by the Alarm subagent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSysSubagentLastMsgText		1.3.6.1.4.1.231.7.2.1.1.5
The last message, warning or error text issued by the Alarm subagent.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomForeignSysTable		1.3.6.1.4.1.231.7.2.1.1.6
The table describes foreign systems connected to the Hicom network. The content of the table is created and maintained by the manager application.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomForeignSysEntry

hicomForeignSysEntry		1.3.6.1.4.1.231.7.2.1.1.6.1
Each entry describes a foreing system connected to the Hicom network.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomForeignSysEntry

hicomForSysPhysNetId		1.3.6.1.4.1.231.7.2.1.1.6.1.1
Physical net identification of the foreign system.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hicomForSysNodeNo		1.3.6.1.4.1.231.7.2.1.1.6.1.2
Node number (physical net) of the foreign system.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomForSysName		1.3.6.1.4.1.231.7.2.1.1.6.1.3
Name of the foreign system.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hicomForSysNetId		1.3.6.1.4.1.231.7.2.1.1.6.1.4
Identifier of the network to which the foreign system belongs.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hicomForSysSubNetId		1.3.6.1.4.1.231.7.2.1.1.6.1.5
Identifier of the sub network to which the foreign system belongs.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hicomForSysProvNetId		1.3.6.1.4.1.231.7.2.1.1.6.1.6
Net identifier of the provider network the foreign system belongs to.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hicomForSysProvSubNetId		1.3.6.1.4.1.231.7.2.1.1.6.1.7
Subnet identifier of the provider network the foreign system belongs to.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hicomForSysRowStat		1.3.6.1.4.1.231.7.2.1.1.6.1.8
Setting a non-existing RowStat variable to 'createAndGo', creates a new row. If creation was successful, the row gets the status 'active'. Variables of an 'active' row can be read and modified. Setting RowStat to 'destroy' effects the deletion of the row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hicomSystemGroup		1.3.6.1.4.1.231.7.2.1.20.1.1.1
Conformance statement of the hicomSystemGroup.
Status: current	Access: read-create
OBJECT-GROUP

internalMessageSystemSubagent		1.3.6.1.4.1.231.7.2.1.21.2.1.0
An internalMessage trap contains an informational message generated by the subagent.
Status: current	Access: read-create
NOTIFICATION-TYPE

internalWarningSystemSubagent		1.3.6.1.4.1.231.7.2.1.21.2.1.1
An internalWarning trap contains a warning message generated by a subagent.
Status: current	Access: read-create
NOTIFICATION-TYPE

internalErrorSystemSubagent		1.3.6.1.4.1.231.7.2.1.21.2.1.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
Status: current	Access: read-create
NOTIFICATION-TYPE

addHicom		1.3.6.1.4.1.231.7.2.1.21.2.1.10
An addHicom trap signifies that a new hicom has been added to network.
Status: current	Access: read-create
NOTIFICATION-TYPE

deleteHicom		1.3.6.1.4.1.231.7.2.1.21.2.1.11
A deleteHicom trap signifies that a hicom has been removed from the network.
Status: current	Access: read-create
NOTIFICATION-TYPE

changeConfig		1.3.6.1.4.1.231.7.2.1.21.2.1.12
A changeConfig trap indicates that some change other than adding or removing a Hicom has been made to the network.
Status: deprecated	Access: read-create
NOTIFICATION-TYPE

hicomAlarmsChanges		1.3.6.1.4.1.231.7.2.1.2.1
Is incremented when an alarm SET or RESET trap has been sent by the agent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hicomAlTable		1.3.6.1.4.1.231.7.2.1.2.2
The table of all Hicom alarms.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomAlEntry

hicomAlEntry		1.3.6.1.4.1.231.7.2.1.2.2.1
Each entry describes a Hicom alarm in detail.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomAlEntry

hicomAlFilter		1.3.6.1.4.1.231.7.2.1.2.2.1.1
Alarm filter status.
Status: current	Access: read-only
OBJECT-TYPE
	AlarmFilterStates

hicomAlStatus		1.3.6.1.4.1.231.7.2.1.2.2.1.2
Status of an alarm.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	reset(1), set(2)

hicomAlPabxId		1.3.6.1.4.1.231.7.2.1.2.2.1.3
Unique identifier of a Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlGroup		1.3.6.1.4.1.231.7.2.1.2.2.1.4
Group identifier of a Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlSubId		1.3.6.1.4.1.231.7.2.1.2.2.1.5
Sub-identifier of a Hicom alarm within its group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlPriority		1.3.6.1.4.1.231.7.2.1.2.2.1.6
Priority of a Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	AlarmPriorities

hicomAlAbsMod		1.3.6.1.4.1.231.7.2.1.2.2.1.7
Hicom module detecting the Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlTimDat		1.3.6.1.4.1.231.7.2.1.2.2.1.8
Date and time of the Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlName		1.3.6.1.4.1.231.7.2.1.2.2.1.9
Name of the Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlReset		1.3.6.1.4.1.231.7.2.1.2.2.1.10
This variable can be set to reset a Hicom alarm.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	init(1), error(2), busy(3), finok(4), finerr(5)

hicomAlTimOldDat		1.3.6.1.4.1.231.7.2.1.2.2.1.11
Date and time of the previous set of this Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlArrivalTimDat		1.3.6.1.4.1.231.7.2.1.2.2.1.12
Unity A&S Date and time of the arrival of this Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlFiltConfTable		1.3.6.1.4.1.231.7.2.1.2.3
The table of configured Hicom alarm filters.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomAlFiltConfEntry

hicomAlFiltConfEntry		1.3.6.1.4.1.231.7.2.1.2.3.1
Each entry specifies a filter for a certain type of Hicom alarm.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomAlFiltConfEntry

hicomAlFiltConfPabxId		1.3.6.1.4.1.231.7.2.1.2.3.1.1
Unique identifier of a Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomAlFiltConfGroup		1.3.6.1.4.1.231.7.2.1.2.3.1.2
Group identifier of a Hicom alarm.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomAlFiltConfSubId		1.3.6.1.4.1.231.7.2.1.2.3.1.3
Sub-identifier of a Hicom alarm within its group.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomAlFiltConfPriority		1.3.6.1.4.1.231.7.2.1.2.3.1.4
Priority of a Hicom alarm.
Status: current	Access: not-accessible
OBJECT-TYPE
	AlarmPriorities

hicomAlFiltConfSwitch		1.3.6.1.4.1.231.7.2.1.2.3.1.5
Specifies whether filtering for this alarm is switched ON or OFF. If set to ON, no trap will be generated in case the alarm is being SET or RESET.
Status: current	Access: read-create
OBJECT-TYPE
	AlarmFilterStates

hicomAlFiltConfRowStat		1.3.6.1.4.1.231.7.2.1.2.3.1.6
Setting a non-existing RowStat variable to 'createAndGo', creates a new row. If creation was successful, the row gets the status 'active'. Variables of an 'active' row can be read and modified. Setting RowStat to 'destroy' effects the deletion of the row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hicomAlarmSubagentLastMsgNo		1.3.6.1.4.1.231.7.2.1.2.4
The last message, warning or error number issued by the Alarm subagent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlarmSubagentLastMsgText		1.3.6.1.4.1.231.7.2.1.2.5
The last message, warning or error text issued by the Alarm subagent.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlMirrorUploadTable		1.3.6.1.4.1.231.7.2.1.2.6
The table to start an Alarm Upload
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomAlMirrorUploadEntry

hicomAlMirrorUploadEntry		1.3.6.1.4.1.231.7.2.1.2.6.1
Each entry describes a Hicom alarm in detail.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomAlMirrorUploadEntry

hicomAlMirrorUploadPabxId		1.3.6.1.4.1.231.7.2.1.2.6.1.1
Unique identifier of a Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlMirrorUploadMnemonic		1.3.6.1.4.1.231.7.2.1.2.6.1.2
Mnemonic name of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlMirrorUploadState		1.3.6.1.4.1.231.7.2.1.2.6.1.3
Status of the AlarmMirror upload done (1), error (2), busy (3)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	done(1), error(2), busy(3)

hicomAlMirrorUploadStartTimDat		1.3.6.1.4.1.231.7.2.1.2.6.1.4
Last successful initiation of an AlarmMirror upload.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlMirrorUploadErrorTimDat		1.3.6.1.4.1.231.7.2.1.2.6.1.5
Last unsuccessful initiation of an AlarmMirror upload.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlarmsGroup		1.3.6.1.4.1.231.7.2.1.20.1.2.1
Conformance statement of the hicomAlarmsGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomAlMirrorUploadGroup		1.3.6.1.4.1.231.7.2.1.20.1.2.2
Conformance statement of the hicomAlMirrorUploadGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomAlTrpSysPabxId		1.3.6.1.4.1.231.7.2.1.21.1.2.1
Unique identifier of a Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomAlTrpSysMnemonic		1.3.6.1.4.1.231.7.2.1.21.1.2.2
Mnemonic name of the Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString

internalMessageAlarmSubagent		1.3.6.1.4.1.231.7.2.1.21.2.2.0
An internalMessage trap contains an informational message generated by the subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalWarningAlarmSubagent		1.3.6.1.4.1.231.7.2.1.21.2.2.1
An internalWarning trap contains a warning message generated by a subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalErrorAlarmSubagent		1.3.6.1.4.1.231.7.2.1.21.2.2.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlResetInitFailed		1.3.6.1.4.1.231.7.2.1.21.2.2.20
A hicomAlResetInitFailed trap signifies that the initialization of an alarm reset has failed.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlUploadMirrorFailed		1.3.6.1.4.1.231.7.2.1.21.2.2.22
A hicomAlUploadMirrorFailed trap signifies that the initialization of an alarm reset has failed.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlarmOnMajor		1.3.6.1.4.1.231.7.2.1.21.2.2.30
A hicomAlarmOnMajor trap is sent when a major alarm is set.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlarmOffMajor		1.3.6.1.4.1.231.7.2.1.21.2.2.31
A hicomAlarmOffMajor trap is sent when a major alarm is reset.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlarmOnMinor		1.3.6.1.4.1.231.7.2.1.21.2.2.32
A hicomAlarmOnMinor trap is sent when a minor alarm is set.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlarmOffMinor		1.3.6.1.4.1.231.7.2.1.21.2.2.33
A hicomAlarmOffMinor trap is sent when a major alarm is reset.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlarmOnDevice		1.3.6.1.4.1.231.7.2.1.21.2.2.34
A hicomAlarmOnDevice trap is sent when a device alarm is set.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlarmOffDevice		1.3.6.1.4.1.231.7.2.1.21.2.2.35
A hicomAlarmOffDevice trap is sent when a device alarm is reset.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlConfig		1.3.6.1.4.1.231.7.2.1.4.1
OBJECT IDENTIFIER

hicomErrAlConfInfo		1.3.6.1.4.1.231.7.2.1.4.2
OBJECT IDENTIFIER

hicomAlConfDiscovery		1.3.6.1.4.1.231.7.2.1.4.3
OBJECT IDENTIFIER

hicomErrorTable		1.3.6.1.4.1.231.7.2.1.3.1
The table of Hicom errors.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomErrorEntry

hicomErrorEntry		1.3.6.1.4.1.231.7.2.1.3.1.1
Each entry describes a Hicom error.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomErrorEntry

hicomErrorPabxId		1.3.6.1.4.1.231.7.2.1.3.1.1.1
Internal identifier of a Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomErrorAlGroup		1.3.6.1.4.1.231.7.2.1.3.1.1.2
Hicom alarm group this error belongs to.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomErrorAlSubId		1.3.6.1.4.1.231.7.2.1.3.1.1.3
Hicom alarm number within the hicomErrorAlGroup this error belongs to.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomErrorSerialNo		1.3.6.1.4.1.231.7.2.1.3.1.1.4
Internal serial number of a Hicom error.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomErrorMsgId		1.3.6.1.4.1.231.7.2.1.3.1.1.5
Identifier of the Hicom error.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorPriority		1.3.6.1.4.1.231.7.2.1.3.1.1.6
Priority of the Hicom error.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorAction		1.3.6.1.4.1.231.7.2.1.3.1.1.7
Required Hicom system action.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorAbsMod		1.3.6.1.4.1.231.7.2.1.3.1.1.8
Hicom module detecting the error.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorEvent		1.3.6.1.4.1.231.7.2.1.3.1.1.9
Description of the Hicom error.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorSubevent		1.3.6.1.4.1.231.7.2.1.3.1.1.10
Subdescription of the Hicom error.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorCardRef		1.3.6.1.4.1.231.7.2.1.3.1.1.11
Reference to a Hicom board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorBoardVersion		1.3.6.1.4.1.231.7.2.1.3.1.1.12
Version of that board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorFwType		1.3.6.1.4.1.231.7.2.1.3.1.1.13
Firmware of that board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorTimDat		1.3.6.1.4.1.231.7.2.1.3.1.1.14
Date and time of the Hicom error.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomErrorOrigText		1.3.6.1.4.1.231.7.2.1.3.1.1.15
Original message text of the Hicom error.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlConfTable		1.3.6.1.4.1.231.7.2.1.4.1.1
The table of the Hicom alarm configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomAlConfEntry

hicomAlConfEntry		1.3.6.1.4.1.231.7.2.1.4.1.1.1
Each entry describes the configuration of a Hicom alarm.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomAlConfEntry

hicomAlConfPabxId		1.3.6.1.4.1.231.7.2.1.4.1.1.1.1
Unique identifier of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfAlGroup		1.3.6.1.4.1.231.7.2.1.4.1.1.1.2
Group identifier of a Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfAlSubId		1.3.6.1.4.1.231.7.2.1.4.1.1.1.3
Internal group identifier of a Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfName		1.3.6.1.4.1.231.7.2.1.4.1.1.1.4
Name of the Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlConfThreshold1		1.3.6.1.4.1.231.7.2.1.4.1.1.1.5
Threshold 'minor' related Hicom errors.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfThreshold2		1.3.6.1.4.1.231.7.2.1.4.1.1.1.6
Threshold 'major' for related Hicom errors.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfTime1		1.3.6.1.4.1.231.7.2.1.4.1.1.1.7
Interval for the minor threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfTime2		1.3.6.1.4.1.231.7.2.1.4.1.1.1.8
Interval for the major threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfTimeH		1.3.6.1.4.1.231.7.2.1.4.1.1.1.9
Threshold interval for device alarms. Unit of Threshold is hours.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfBase		1.3.6.1.4.1.231.7.2.1.4.1.1.1.10
Base value for thresholds in percent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfPersonTable		1.3.6.1.4.1.231.7.2.1.4.1.2
The table for the alarm configuration of personal (VIP) Hicom alarms.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomAlConfPersonEntry

hicomAlConfPersonEntry		1.3.6.1.4.1.231.7.2.1.4.1.2.1
Each entry contains an extension number for which a VIP alarm is configured.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomAlConfPersonEntry

hicomAlConfPersonPabxId		1.3.6.1.4.1.231.7.2.1.4.1.2.1.1
Unique identifier of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfPersonAlGroup		1.3.6.1.4.1.231.7.2.1.4.1.2.1.2
Group identifier of the Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfPersonAlSubId		1.3.6.1.4.1.231.7.2.1.4.1.2.1.3
Internal group identifier of the Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfPersonExtNo		1.3.6.1.4.1.231.7.2.1.4.1.2.1.4
Extension number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlConfTargetTable		1.3.6.1.4.1.231.7.2.1.4.1.3
The table of the alarm configuration of Hicom target alarms.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomAlConfTargetEntry

hicomAlConfTargetEntry		1.3.6.1.4.1.231.7.2.1.4.1.3.1
Each entry describes a trunk for which a target alarm is configured.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomAlConfTargetEntry

hicomAlConfTargetPabxId		1.3.6.1.4.1.231.7.2.1.4.1.3.1.1
Unique identifier of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfTargetAlGroup		1.3.6.1.4.1.231.7.2.1.4.1.3.1.2
Group identifier of the Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfTargetAlSubId		1.3.6.1.4.1.231.7.2.1.4.1.3.1.3
Internal group identifier of the Hicom alarm.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfTargetLtg		1.3.6.1.4.1.231.7.2.1.4.1.3.1.4
Line Trunk Group of the trunk.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfTargetLtu		1.3.6.1.4.1.231.7.2.1.4.1.3.1.5
Line Trunk Unit of the trunk.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfTargetSlot		1.3.6.1.4.1.231.7.2.1.4.1.3.1.6
Slot of the trunk.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfTargetTrunkNo		1.3.6.1.4.1.231.7.2.1.4.1.3.1.7
Trunk number.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomErrAlConfSubagentLastMsgNo		1.3.6.1.4.1.231.7.2.1.4.2.1
The last message, warning or error number issued by the Error/Alarm config subagent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomErrAlConfSubagentLastMsgText		1.3.6.1.4.1.231.7.2.1.4.2.2
The last message, warning or error text issued by the Error/Alarm config subagent.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrAlConfResultData		1.3.6.1.4.1.231.7.2.1.4.2.3
Is used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and indicates the availability of new discovered data. The new data is to be incorporated by the subagent into the subagent's data base.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hicomAlConfChanges		1.3.6.1.4.1.231.7.2.1.4.3.1
Indicates changes in the hicomAlConfig group.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hicomAlConfDiscovTable		1.3.6.1.4.1.231.7.2.1.4.3.2
This table contains information about the alarm configuration discoveries for each managed Hicom.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomAlConfDiscovEntry

hicomAlConfDiscovEntry		1.3.6.1.4.1.231.7.2.1.4.3.2.1
Each entry describes the alarm configuration discovery for a specific hicom.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomAlConfDiscovEntry

hicomAlConfDiscovPabxId		1.3.6.1.4.1.231.7.2.1.4.3.2.1.1
Unique identifier of the Hicom being discovered.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomAlConfDiscovPabxMnemonic		1.3.6.1.4.1.231.7.2.1.4.3.2.1.2
Name of the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlConfDiscovStatus		1.3.6.1.4.1.231.7.2.1.4.3.2.1.3
Status of the alarm configuration discovery process.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryStates

hicomAlConfDiscovMode		1.3.6.1.4.1.231.7.2.1.4.3.2.1.4
Mode of the alarm configuration discovery process.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryModes

hicomAlConfDiscovTimDat		1.3.6.1.4.1.231.7.2.1.4.3.2.1.5
Date and time of the last successful discovery.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomAlConfDiscovErrTimDat		1.3.6.1.4.1.231.7.2.1.4.3.2.1.6
Date and time of the last failed discovery.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomErrorGroup		1.3.6.1.4.1.231.7.2.1.20.1.3.1
Conformance statement for hicomErrorGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomAlConfigGroup		1.3.6.1.4.1.231.7.2.1.20.1.4.1
Conformance statement for hicomAlConfigGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomErrAlConfInfoGroup		1.3.6.1.4.1.231.7.2.1.20.1.4.2
Conformance statement for hicomErrAlConfInfoGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomAlConfDiscoveryGroup		1.3.6.1.4.1.231.7.2.1.20.1.4.3
Conformance statement for hicomAlConfDiscoveryGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomErrTrpPabxId		1.3.6.1.4.1.231.7.2.1.21.1.3.1
Unique identifier of a Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomErrTrpMnemonic		1.3.6.1.4.1.231.7.2.1.21.1.3.2
Mnemonic name of the Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString

internalMessageErrAlConfSubagent		1.3.6.1.4.1.231.7.2.1.21.2.3.0
An internalMessage trap contains an informational message generated by the subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalWarningErrAlConfSubagent		1.3.6.1.4.1.231.7.2.1.21.2.3.1
An internalWarning trap contains a warning message generated by a subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalErrorErrAlConfSubagent		1.3.6.1.4.1.231.7.2.1.21.2.3.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomErrorMsg		1.3.6.1.4.1.231.7.2.1.21.2.3.20
A Hicom error message trap contains information extracted from a Hicom error message
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlConfDiscovSucc		1.3.6.1.4.1.231.7.2.1.21.2.3.10
A hicomAlConfDiscovSucc trap indicates the successful termination of a discovery process. hicomAlConfDiscovPabxId indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlConfDiscovErr		1.3.6.1.4.1.231.7.2.1.21.2.3.11
A hicomAlConfDiscovErr trap signifies the unsuccessful termination of a discovery process. hicomAlConfDiscovPabxId indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomAlConfDiscovBusy		1.3.6.1.4.1.231.7.2.1.21.2.3.19
A hicomAlConfDiscovBusy trap signifies that a alarm conf discovery process is running. hicomAlConfDiscovPabxId indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomSoftAps		1.3.6.1.4.1.231.7.2.1.5.1
OBJECT IDENTIFIER

hicomSoftInfo		1.3.6.1.4.1.231.7.2.1.5.2
OBJECT IDENTIFIER

hicomSoftDiscovery		1.3.6.1.4.1.231.7.2.1.5.3
OBJECT IDENTIFIER

hicomSoftApsTable		1.3.6.1.4.1.231.7.2.1.5.1.1
The table of installed Hicom software systems.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomSoftApsEntry

hicomSoftApsEntry		1.3.6.1.4.1.231.7.2.1.5.1.1.1
Each entry describes a Hicom software system.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomSoftApsEntry

hicomSoftApsPabxId		1.3.6.1.4.1.231.7.2.1.5.1.1.1.1
Unique identifier of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSoftApsID		1.3.6.1.4.1.231.7.2.1.5.1.1.1.2
Identifier of the software package.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomSoftApsPartNo		1.3.6.1.4.1.231.7.2.1.5.1.1.1.3
Siemens part number of the software package.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSoftPatchTable		1.3.6.1.4.1.231.7.2.1.5.1.2
The table of installed Hicom software patches.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomSoftPatchEntry

hicomSoftPatchEntry		1.3.6.1.4.1.231.7.2.1.5.1.2.1
Each entry describes a software patch.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomSoftPatchEntry

hicomSoftPatchPabxId		1.3.6.1.4.1.231.7.2.1.5.1.2.1.1
Unique identifier of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSoftPatchNo		1.3.6.1.4.1.231.7.2.1.5.1.2.1.2
Identifier of the software patch.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomSoftPatchHWMod		1.3.6.1.4.1.231.7.2.1.5.1.2.1.3
Identification of a hardware module the patch is for.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSoftPatchActType		1.3.6.1.4.1.231.7.2.1.5.1.2.1.4
Activation state of patch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSoftPatchGroup		1.3.6.1.4.1.231.7.2.1.5.1.2.1.5
Group identifier of a patch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSoftSubagentLastMsgNo		1.3.6.1.4.1.231.7.2.1.5.2.1
The last message, warning or error number issued by the Software subagent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSoftSubagentLastMsgText		1.3.6.1.4.1.231.7.2.1.5.2.2
The last message, warning or error text issued by the Software subagent.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomSoftResultData		1.3.6.1.4.1.231.7.2.1.5.2.3
Is used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and indicates the availability of new discovered data. The new data is to be incorporated by the subagent into the subagent's data base.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hicomSoftChanges		1.3.6.1.4.1.231.7.2.1.5.3.1
Indicates changes in the hicomSoft group.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hicomSoftDiscovTable		1.3.6.1.4.1.231.7.2.1.5.3.2
This table contains information about the software discoveries for each managed Hicom.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomSoftDiscovEntry

hicomSoftDiscovEntry		1.3.6.1.4.1.231.7.2.1.5.3.2.1
Each entry describes the software discovery for a specific hicom.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomSoftDiscovEntry

hicomSoftDiscovPabxId		1.3.6.1.4.1.231.7.2.1.5.3.2.1.1
Unique identifier of the Hicom being discovered.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSoftDiscovPabxMnemonic		1.3.6.1.4.1.231.7.2.1.5.3.2.1.2
Name of the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSoftDiscovStatus		1.3.6.1.4.1.231.7.2.1.5.3.2.1.3
Status of the software discovery process.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryStates

hicomSoftDiscovMode		1.3.6.1.4.1.231.7.2.1.5.3.2.1.4
Mode of the software discovery process.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryModes

hicomSoftDiscovTimDat		1.3.6.1.4.1.231.7.2.1.5.3.2.1.5
Date and time of the last successful software discovery.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSoftDiscovErrTimDat		1.3.6.1.4.1.231.7.2.1.5.3.2.1.6
Date and time of the last failed software discovery.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSoftGroup		1.3.6.1.4.1.231.7.2.1.20.1.5.1
Conformance statement for hicomSoftGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomSoftInfoGroup		1.3.6.1.4.1.231.7.2.1.20.1.5.2
Conformance statement for hicomSoftInfoGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomSoftDiscoveryGroup		1.3.6.1.4.1.231.7.2.1.20.1.5.3
Conformance statement for hicomSoftDiscoveryGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomSWTrpPabxId		1.3.6.1.4.1.231.7.2.1.21.1.4.1
Unique identifier of a Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomSWTrpPabxMnemonic		1.3.6.1.4.1.231.7.2.1.21.1.4.2
Mnemonic name of the Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString

internalMessageSWSubagent		1.3.6.1.4.1.231.7.2.1.21.2.5.0
An internalMessage trap contains an informational message generated by the subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalWarningSWSubagent		1.3.6.1.4.1.231.7.2.1.21.2.5.1
An internalWarning trap contains a warning message generated by a subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalErrorSWSubagent		1.3.6.1.4.1.231.7.2.1.21.2.5.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomSoftDiscovSucc		1.3.6.1.4.1.231.7.2.1.21.2.5.10
A hicomSoftDiscovSucc trap indicates the successful termination of a discovery process. hicomSoftDiscovPabxId indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomSoftDiscovErr		1.3.6.1.4.1.231.7.2.1.21.2.5.11
A hicomSoftDiscovErr trap signifies the unsuccessful termination of a discovery process. hicomSoftDiscovPabxId indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomSoftDiscovBusy		1.3.6.1.4.1.231.7.2.1.21.2.5.19
A hicomSoftDiscovBusy trap signifies that a sw discovery process is running. hicomSoftDiscovPabxId indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomCabinets		1.3.6.1.4.1.231.7.2.1.6.1
OBJECT IDENTIFIER

hicomPeripherals		1.3.6.1.4.1.231.7.2.1.6.2
OBJECT IDENTIFIER

hicomBoards		1.3.6.1.4.1.231.7.2.1.6.3
OBJECT IDENTIFIER

hicomHWInfo		1.3.6.1.4.1.231.7.2.1.6.4
OBJECT IDENTIFIER

hicomHWDiscovery		1.3.6.1.4.1.231.7.2.1.6.5
OBJECT IDENTIFIER

hicomCabTable		1.3.6.1.4.1.231.7.2.1.6.1.1
The table of installed hicom cabinets.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomCabEntry

hicomCabEntry		1.3.6.1.4.1.231.7.2.1.6.1.1.1
Each entry describes a hicom cabinet.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomCabEntry

hicomCabPabxId		1.3.6.1.4.1.231.7.2.1.6.1.1.1.1
Unique identifier of the Hicom to which the cabinet belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCabAddr		1.3.6.1.4.1.231.7.2.1.6.1.1.1.2
Unique identifier of the cabinet within the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomCabType		1.3.6.1.4.1.231.7.2.1.6.1.1.1.3
Short name of cabinet type.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomCabPartNo		1.3.6.1.4.1.231.7.2.1.6.1.1.1.4
Siemens part number of the cabinet.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomCabNumShelves		1.3.6.1.4.1.231.7.2.1.6.1.1.1.5
The number of shelves in a cabinet.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomFrameTable		1.3.6.1.4.1.231.7.2.1.6.1.2
The table of installed Hicom frames.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomFrameEntry

hicomFrameEntry		1.3.6.1.4.1.231.7.2.1.6.1.2.1
Each entry describes one Hicom frame.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomFrameEntry

hicomFramePabxId		1.3.6.1.4.1.231.7.2.1.6.1.2.1.1
Unique identifier of the Hicom to which a frame belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomFrameCabAddr		1.3.6.1.4.1.231.7.2.1.6.1.2.1.2
Identifier of the cabinet to which a frame belongs.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomFrameMntLevel		1.3.6.1.4.1.231.7.2.1.6.1.2.1.3
Mounting level of the frame in a cabinet.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomFrameType		1.3.6.1.4.1.231.7.2.1.6.1.2.1.4
Short name of frame type.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomFramePartNo		1.3.6.1.4.1.231.7.2.1.6.1.2.1.5
Siemens part number for this frame type.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomFramePID1		1.3.6.1.4.1.231.7.2.1.6.1.2.1.6
Processor identification - control part A.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomFramePID2		1.3.6.1.4.1.231.7.2.1.6.1.2.1.7
Processor identification - control part B.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomFramePID3		1.3.6.1.4.1.231.7.2.1.6.1.2.1.8
Processor identification.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomFrameLTU		1.3.6.1.4.1.231.7.2.1.6.1.2.1.9
If the shelf houses a LTU, this is the LTU's number.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomFrameIpAddr		1.3.6.1.4.1.231.7.2.1.6.1.2.1.10
IP-Adress related to a Local Sysytem (LS).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomPeriphTable		1.3.6.1.4.1.231.7.2.1.6.2.1
The table of installed devices: disks, tapes etc.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomPeriphEntry

hicomPeriphEntry		1.3.6.1.4.1.231.7.2.1.6.2.1.1
Each entry describes a device.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomPeriphEntry

hicomPeriphPabxId		1.3.6.1.4.1.231.7.2.1.6.2.1.1.1
Unique identifier of the Hicom to which the peripheral device belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomPeriphContrID		1.3.6.1.4.1.231.7.2.1.6.2.1.1.2
Identifier of the controller the device is connected to.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomPeriphModule		1.3.6.1.4.1.231.7.2.1.6.2.1.1.3
Identifier of the related sever module: A1, C1, V1-V3 or T1-T3.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomPeriphType		1.3.6.1.4.1.231.7.2.1.6.2.1.1.4
Abbreviation of the device type: HD, FT, CT ...
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomPeriphSSNo		1.3.6.1.4.1.231.7.2.1.6.2.1.1.5
Product identification.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomPeriphSize		1.3.6.1.4.1.231.7.2.1.6.2.1.1.6
Capacity (MB) of the storage medium.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomPeriphGran		1.3.6.1.4.1.231.7.2.1.6.2.1.1.7
Sector size of the medium.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCDSMTable		1.3.6.1.4.1.231.7.2.1.6.3.1
The table of hicom CDSM boards.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomCDSMEntry

hicomCDSMEntry		1.3.6.1.4.1.231.7.2.1.6.3.1.1
Each entry describes one hardware board.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomCDSMEntry

hicomCDSMPabxId		1.3.6.1.4.1.231.7.2.1.6.3.1.1.1
Identifier of the Hicom to which the Board belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCDSMCabAddr		1.3.6.1.4.1.231.7.2.1.6.3.1.1.2
Identifier of the cabinet to which the board belongs.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomCDSMMntLevel		1.3.6.1.4.1.231.7.2.1.6.3.1.1.3
Mounting level of the frame containing the board.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCDSMSlotAddr		1.3.6.1.4.1.231.7.2.1.6.3.1.1.4
Slot address for the board within its frame.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCDSMPartNo		1.3.6.1.4.1.231.7.2.1.6.3.1.1.5
Siemens part number of the installed board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomCDSMCode		1.3.6.1.4.1.231.7.2.1.6.3.1.1.6
Short name of the board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomCDSMVers		1.3.6.1.4.1.231.7.2.1.6.3.1.1.7
Version number of the board.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCDSMFirmware		1.3.6.1.4.1.231.7.2.1.6.3.1.1.8
Firmware version installed on the board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomCDSUTable		1.3.6.1.4.1.231.7.2.1.6.3.2
The table of hicom CDSU boards.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomCDSUEntry

hicomCDSUEntry		1.3.6.1.4.1.231.7.2.1.6.3.2.1
Each entry describes one CDSU Board.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomCDSUEntry

hicomCDSUPabxId		1.3.6.1.4.1.231.7.2.1.6.3.2.1.1
The identifier of the Hicom to which the board belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCDSUCabAddr		1.3.6.1.4.1.231.7.2.1.6.3.2.1.2
Identifier of the cabinet to which the board belongs.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomCDSUMntLevel		1.3.6.1.4.1.231.7.2.1.6.3.2.1.3
Mounting level of the frame containing the board.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCDSUSlotAddr		1.3.6.1.4.1.231.7.2.1.6.3.2.1.4
Slot address for the board within its frame.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCDSUPartNo		1.3.6.1.4.1.231.7.2.1.6.3.2.1.5
Siemens part number of the installed board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomCDSUCode		1.3.6.1.4.1.231.7.2.1.6.3.2.1.6
Short name of the board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomCDSUVers		1.3.6.1.4.1.231.7.2.1.6.3.2.1.7
Version number of the board.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomCDSUFirmware		1.3.6.1.4.1.231.7.2.1.6.3.2.1.8
Firmware version installed on the board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSMTable		1.3.6.1.4.1.231.7.2.1.6.3.3
The table of hicom BCSM boards.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomBCSMEntry

hicomBCSMEntry		1.3.6.1.4.1.231.7.2.1.6.3.3.1
Each entry describes one HW board.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomBCSMEntry

hicomBCSMPabxId		1.3.6.1.4.1.231.7.2.1.6.3.3.1.1
The identifier of the Hicom to which the board belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomBCSMMod		1.3.6.1.4.1.231.7.2.1.6.3.3.1.2
Identifier of the module to which the board belongs.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomBCSMSlotAddr		1.3.6.1.4.1.231.7.2.1.6.3.3.1.3
Address of slot containing the board.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomBCSMConfBoard		1.3.6.1.4.1.231.7.2.1.6.3.3.1.4
Siemens part number of the configured board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSMCode		1.3.6.1.4.1.231.7.2.1.6.3.3.1.5
Short name of the board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSMInstBoard		1.3.6.1.4.1.231.7.2.1.6.3.3.1.6
Siemens part number of the installed board. This information may in fact differ from that in hicomBCSMConfBoard.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSMVers		1.3.6.1.4.1.231.7.2.1.6.3.3.1.7
Version number of the board.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomBCSMFirmware		1.3.6.1.4.1.231.7.2.1.6.3.3.1.8
Firmware version installed on the board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSMStatus		1.3.6.1.4.1.231.7.2.1.6.3.3.1.9
State of the board: INS, READY ...
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSUTable		1.3.6.1.4.1.231.7.2.1.6.3.4
The table of hicom BCSU boards.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomBCSUEntry

hicomBCSUEntry		1.3.6.1.4.1.231.7.2.1.6.3.4.1
Each entry describes one HW board.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomBCSUEntry

hicomBCSUPabxId		1.3.6.1.4.1.231.7.2.1.6.3.4.1.1
The identifier of the Hicom to which the board belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomBCSULTG		1.3.6.1.4.1.231.7.2.1.6.3.4.1.2
Identifier of the LTG to which the LTU belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomBCSULTU		1.3.6.1.4.1.231.7.2.1.6.3.4.1.3
Identifier of the LTU to which the board belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomBCSUSlotAddr		1.3.6.1.4.1.231.7.2.1.6.3.4.1.4
Address of slot containing the board.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomBCSUConfBoard		1.3.6.1.4.1.231.7.2.1.6.3.4.1.5
Siemens part number of the configured board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSUCode		1.3.6.1.4.1.231.7.2.1.6.3.4.1.6
Short name of the board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSUInstBoard		1.3.6.1.4.1.231.7.2.1.6.3.4.1.7
Siemens part number of the installed board. This information may in fact differ from that in hicomBCSMConfBoard.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSUVers		1.3.6.1.4.1.231.7.2.1.6.3.4.1.8
Version number of the board.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomBCSUFirmware		1.3.6.1.4.1.231.7.2.1.6.3.4.1.9
Firmware version installed on the board.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomBCSUStatus		1.3.6.1.4.1.231.7.2.1.6.3.4.1.10
State of the board: INS, READY ...
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomHWChanges		1.3.6.1.4.1.231.7.2.1.6.5.1
Indicates the number of finished hardware discoveries - corresponds to the number of hicomHWDiscovXXX traps sent out.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hicomHWDiscovTable		1.3.6.1.4.1.231.7.2.1.6.5.2
The table describing the status concerning discovery of HW information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomHWDiscovEntry

hicomHWDiscovEntry		1.3.6.1.4.1.231.7.2.1.6.5.2.1
Each entry describes the status of the discovery process for a specific hicom.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomHWDiscovEntry

hicomHWDiscovPabxId		1.3.6.1.4.1.231.7.2.1.6.5.2.1.1
Unique identifier of the Hicom being discovered.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomHWDiscovPabxMnemonic		1.3.6.1.4.1.231.7.2.1.6.5.2.1.2
Name of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomHWDiscovStatus		1.3.6.1.4.1.231.7.2.1.6.5.2.1.3
Status of HW discovery process. A Manager may initiate a discovery by setting this variable to value busy. The other values are set by the agent.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryStates

hicomHWDiscovMode		1.3.6.1.4.1.231.7.2.1.6.5.2.1.4
Mode of discovery process.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryModes

hicomHWDiscovTimDat		1.3.6.1.4.1.231.7.2.1.6.5.2.1.5
Date and time (year, month, day, hour, minute, second) the last successful discovery action was performed for the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomHWDiscovErrTimDat		1.3.6.1.4.1.231.7.2.1.6.5.2.1.6
Date and time (year, month, day, hour, minute, second) the last failed discovery action was performed for the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomHardSubagentLastMsgNo		1.3.6.1.4.1.231.7.2.1.6.4.1
The last message, warning or error number issued by the Hardware subagent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomHardSubagentLastMsgText		1.3.6.1.4.1.231.7.2.1.6.4.2
The last message, warning or error text issued by the Hardware subagent.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomHardSubagentResultData		1.3.6.1.4.1.231.7.2.1.6.4.3
Is used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and indicates the availability of new discovered data. The new data is to be incorporated by the subagent into the subagent's data base.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hicomCabinetsGroup		1.3.6.1.4.1.231.7.2.1.20.1.6.1
Conformance statement for hicomCabinetsGroup.
Status: current	Access: read-write
OBJECT-GROUP

hicomPeriperalsGroup		1.3.6.1.4.1.231.7.2.1.20.1.6.2
Conformance statement for hicomPeriperalsGroup.
Status: current	Access: read-write
OBJECT-GROUP

hicomBoardsGroup		1.3.6.1.4.1.231.7.2.1.20.1.6.3
Conformance statement for hicomBoardsGroup.
Status: current	Access: read-write
OBJECT-GROUP

hicomHWInfoGroup		1.3.6.1.4.1.231.7.2.1.20.1.6.4
Conformance statement for hicomHWInfoGroup.
Status: current	Access: read-write
OBJECT-GROUP

hicomHWDiscoveryGroup		1.3.6.1.4.1.231.7.2.1.20.1.6.5
Conformance statement for hicomHWDiscoveryGroup.
Status: current	Access: read-write
OBJECT-GROUP

hicomHWTrpPabxId		1.3.6.1.4.1.231.7.2.1.21.1.6.1
Unique identifier of a Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomHWTrpPabxMnemonic		1.3.6.1.4.1.231.7.2.1.21.1.6.2
Mnemonic name of the Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString

internalMessageHWSubagent		1.3.6.1.4.1.231.7.2.1.21.2.6.0
An internalMessage trap contains an informational message generated by the subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalWarningHWSubagent		1.3.6.1.4.1.231.7.2.1.21.2.6.1
An internalWarning trap contains a warning message generated by a subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalErrorHWSubagent		1.3.6.1.4.1.231.7.2.1.21.2.6.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomHWDiscovSucc		1.3.6.1.4.1.231.7.2.1.21.2.6.10
A hicomHWDiscovSucc trap signifies the successful termination of a discovery request / process. hicomHWDiscovPabxId: indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomHWDiscovErr		1.3.6.1.4.1.231.7.2.1.21.2.6.11
A hicomHWDiscovErr trap signifies the unsuccessful termination of a discovery request / process. hicomHWDiscovPabxId: indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomHWDiscovBusy		1.3.6.1.4.1.231.7.2.1.21.2.6.19
A hicomHWDiscovBusy trap signifies that a hw discovery process is running. hicomHWDiscovPabxId: indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomTrunkGrp		1.3.6.1.4.1.231.7.2.1.7.1
OBJECT IDENTIFIER

hicomTrunk		1.3.6.1.4.1.231.7.2.1.7.2
OBJECT IDENTIFIER

hicomTopoInfo		1.3.6.1.4.1.231.7.2.1.7.3
OBJECT IDENTIFIER

hicomTopoDiscovery		1.3.6.1.4.1.231.7.2.1.7.4
OBJECT IDENTIFIER

hicomKntop		1.3.6.1.4.1.231.7.2.1.7.5
OBJECT IDENTIFIER

hicomTrunkGrpTable		1.3.6.1.4.1.231.7.2.1.7.1.1
The table of trunk groups.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomTrunkGrpEntry

hicomTrunkGrpEntry		1.3.6.1.4.1.231.7.2.1.7.1.1.1
Each entry describes a Hicom trunk group.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomTrunkGrpEntry

hicomTrunkGrpPabxId		1.3.6.1.4.1.231.7.2.1.7.1.1.1.1
Unique identifier of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkGrpNo		1.3.6.1.4.1.231.7.2.1.7.1.1.1.2
Identifier Trunk Group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkGrpNNodeNo		1.3.6.1.4.1.231.7.2.1.7.1.1.1.3
Number of neighbour node. Value to be delivered by manager.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hicomTrunkGrpVNodeNo		1.3.6.1.4.1.231.7.2.1.7.1.1.1.4
Derived from source SNodeNo of trunk table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkGrpTrunkType		1.3.6.1.4.1.231.7.2.1.7.1.1.1.5
Type of the trunk group.
Status: current	Access: read-only
OBJECT-TYPE
	TrunkTypes

hicomTrunkGrpMaxNo		1.3.6.1.4.1.231.7.2.1.7.1.1.1.6
The maximum number of trunks a trunk groupp may contain.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkGrpName		1.3.6.1.4.1.231.7.2.1.7.1.1.1.7
Name of the trunk group.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomTrunkGrpDevice		1.3.6.1.4.1.231.7.2.1.7.1.1.1.8
Type of device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomTrunkGrpAlarms		1.3.6.1.4.1.231.7.2.1.7.1.1.1.9
Octet string contains configured AlSubIds (0 up to 519) of related Pabx und trunkgroup. The hicomTrunkGrpAlarms string is 65 octets long. AlSubId '0' is set, if (hicomTrunkGrpAlarms[0] AND 0x01) evaluates to true. AlSubId '7' is set, if (hicomTrunkGrpAlarms[0] AND 0x80) evaluates to true. AlSubId '8' is set, if (hicomTrunkGrpAlarms[1] AND 0x01) evaluates to true etc.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomTrunkTable		1.3.6.1.4.1.231.7.2.1.7.2.1
The table of trunks.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomTrunkEntry

hicomTrunkEntry		1.3.6.1.4.1.231.7.2.1.7.2.1.1
Each entry describes a Hicom trunk.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomTrunkEntry

hicomTrunkPabxId		1.3.6.1.4.1.231.7.2.1.7.2.1.1.1
Identifier of the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkType		1.3.6.1.4.1.231.7.2.1.7.2.1.1.2
Type of trunk.
Status: current	Access: read-only
OBJECT-TYPE
	TrunkTypes

hicomTrunkTrunkGrpNo		1.3.6.1.4.1.231.7.2.1.7.2.1.1.3
Identifier of the related Trunk Group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkLtg		1.3.6.1.4.1.231.7.2.1.7.2.1.1.4
Identifier of the related line trunk group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkLtu		1.3.6.1.4.1.231.7.2.1.7.2.1.1.5
Identifier of the related line trunk unit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkSlot		1.3.6.1.4.1.231.7.2.1.7.2.1.1.6
Identification of slot within a frame.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkNo		1.3.6.1.4.1.231.7.2.1.7.2.1.1.7
Number of trunk within a trunk group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkChannelGrp		1.3.6.1.4.1.231.7.2.1.7.2.1.1.8
Identification of an aggregate of B-channels.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkSNodeNo		1.3.6.1.4.1.231.7.2.1.7.2.1.1.9
Virtual number of the source node of a connection.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkStatOp		1.3.6.1.4.1.231.7.2.1.7.2.1.1.10
The operational state of a trunk.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

hicomTrunkAlSubId		1.3.6.1.4.1.231.7.2.1.7.2.1.1.11
Assigned alarm referring to a specific target.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTrunkChannels		1.3.6.1.4.1.231.7.2.1.7.2.1.1.12
List of chanels in a trunk group. Base64 coded.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomTrunkDevice		1.3.6.1.4.1.231.7.2.1.7.2.1.1.13
Type of device / connection.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomTrunkName		1.3.6.1.4.1.231.7.2.1.7.2.1.1.14
Name of the trunk.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomKntopTable		1.3.6.1.4.1.231.7.2.1.7.5.1
The table of kntop.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomKntopEntry

hicomKntopEntry		1.3.6.1.4.1.231.7.2.1.7.5.1.1
Each entry describes a connection between two Hicoms.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomKntopEntry

hicomKntopPabxId		1.3.6.1.4.1.231.7.2.1.7.5.1.1.1
Identifier of the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopLtg		1.3.6.1.4.1.231.7.2.1.7.5.1.1.2
Identifier of the related line trunk group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopLtu		1.3.6.1.4.1.231.7.2.1.7.5.1.1.3
Identifier of the related line trunk unit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopSlot		1.3.6.1.4.1.231.7.2.1.7.5.1.1.4
Identification of slot within a frame.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopSatznr		1.3.6.1.4.1.231.7.2.1.7.5.1.1.5
Number of trunk within a trunk group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopBKanalGrp		1.3.6.1.4.1.231.7.2.1.7.5.1.1.6
Identification of an aggregate of B-channels.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopPNodeIndex		1.3.6.1.4.1.231.7.2.1.7.5.1.1.7
Entry Index of the Partner Node.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopPLtg		1.3.6.1.4.1.231.7.2.1.7.5.1.1.8
Target Identifier of the related line trunk group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopPLtu		1.3.6.1.4.1.231.7.2.1.7.5.1.1.9
Target Identifier of the related line trunk unit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopPSlot		1.3.6.1.4.1.231.7.2.1.7.5.1.1.10
Target Identification of slot within a frame.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopPSatznr		1.3.6.1.4.1.231.7.2.1.7.5.1.1.11
Target Number of trunk within a trunk group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopPBKanalGrp		1.3.6.1.4.1.231.7.2.1.7.5.1.1.12
Target Identification of an aggregate of B-channels.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopPNodeNo		1.3.6.1.4.1.231.7.2.1.7.5.1.1.13
Node number of the target node of the connection.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomKntopBunr		1.3.6.1.4.1.231.7.2.1.7.5.1.1.14
Buendelnumber of the PEN
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTopoChanges		1.3.6.1.4.1.231.7.2.1.7.4.1
Indicates number of hardware discoveries - corresponds to TopoDiscovery traps sent out.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hicomTopoDiscovTable		1.3.6.1.4.1.231.7.2.1.7.4.2
The table describing the status concerning discovery of topology information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomTopoDiscovEntry

hicomTopoDiscovEntry		1.3.6.1.4.1.231.7.2.1.7.4.2.1
An entry in the hicomTopoDiscovTable. Each entry describes the status of the discovery process for a specific hicom.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomTopoDiscovEntry

hicomTopoDiscovPabxId		1.3.6.1.4.1.231.7.2.1.7.4.2.1.1
Unique identifier of the Hicom being discovered.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTopoDiscovPabxMnemonic		1.3.6.1.4.1.231.7.2.1.7.4.2.1.2
Name of the Hicom system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomTopoDiscovStatus		1.3.6.1.4.1.231.7.2.1.7.4.2.1.3
Status of Topo discovery process. A manager initiates discovery by setting the variable to 'busy'. The agent will set the other values.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryStates

hicomTopoDiscovMode		1.3.6.1.4.1.231.7.2.1.7.4.2.1.4
Mode of discovery process.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryModes

hicomTopoDiscovTimDat		1.3.6.1.4.1.231.7.2.1.7.4.2.1.5
Date and time (year, month, day, hour, minute, second) the last successful discovery action was performed for the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomTopoDiscovErrTimDat		1.3.6.1.4.1.231.7.2.1.7.4.2.1.6
Date and time (year, month, day, hour, minute, second) the last failed discovery action was performed for the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomTopoSubagentLastMsgNo		1.3.6.1.4.1.231.7.2.1.7.3.1
The last message, warning or error number issued by the Topology subagent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomTopoSubagentLastMsgText		1.3.6.1.4.1.231.7.2.1.7.3.2
The last message, warning or error text issued by the Topology subagent.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomTopoSubagentResultData		1.3.6.1.4.1.231.7.2.1.7.3.3
Is used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and indicates the availability of new discovered data. The new data is to be incorporated by the subagent into the subagent's data base.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hicomTrunkGrpGroup		1.3.6.1.4.1.231.7.2.1.20.1.7.1
Conformance statement for hicomTrunkGrpGroup.
Status: current	Access: read-write
OBJECT-GROUP

hicomTrunkGroup		1.3.6.1.4.1.231.7.2.1.20.1.7.2
Conformance statement for hicomTrunkGroup.
Status: current	Access: read-write
OBJECT-GROUP

hicomTopoInfoGroup		1.3.6.1.4.1.231.7.2.1.20.1.7.3
Conformance statement for hicomTopoInfoGroup.
Status: current	Access: read-write
OBJECT-GROUP

hicomTopoDiscoveryGroup		1.3.6.1.4.1.231.7.2.1.20.1.7.4
Conformance statement for hicomTopoDiscoveryGroup.
Status: current	Access: read-write
OBJECT-GROUP

hicomKntopGroup		1.3.6.1.4.1.231.7.2.1.20.1.7.5
Conformance statement for hicomKntopTable.
Status: current	Access: read-write
OBJECT-GROUP

hicomTopoTrpPabxId		1.3.6.1.4.1.231.7.2.1.21.1.7.1
Unique identifier of a Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomTopoTrpPabxMnemonic		1.3.6.1.4.1.231.7.2.1.21.1.7.2
Mnemonic name of the Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString

internalMessageTopoSubagent		1.3.6.1.4.1.231.7.2.1.21.2.7.0
An internalMessage trap contains an informational message generated by the subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalWarningTopoSubagent		1.3.6.1.4.1.231.7.2.1.21.2.7.1
An internalWarning trap contains a warning message generated by a subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalErrorTopoSubagent		1.3.6.1.4.1.231.7.2.1.21.2.7.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomTopoDiscovSucc		1.3.6.1.4.1.231.7.2.1.21.2.7.10
A hicomTopoDiscovSucc trap signifies the successful termination of a discovery process. hicomTopoDiscovPabxId: indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomTopoDiscovErr		1.3.6.1.4.1.231.7.2.1.21.2.7.11
A hicomTopoDiscovErr trap signifies the unsuccessful termination of a discovery process. hicomTopoDiscovPabxId: indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomTopoDiscovBusy		1.3.6.1.4.1.231.7.2.1.21.2.7.19
A hicomTopoDiscovBusy trap signifies that a topo discovery process is running. hicomTopoDiscovPabxId: indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomSQLsessionIdGenerator		1.3.6.1.4.1.231.7.2.1.8.1
hicomSQLsessionIdGenerator is used to create and assign unique SQL session identifiers to concurrent manager applications. hicomSQLsessionIdGenerator shall be used in accordance to the semantics of TestAndIncr specified in Textual Conventions (RFC1903). A GET on hicomSQLsessionIdGenerator returns a new SQL session ID. This value shall be confirmed/claimed by a manager application by setting the hicomSQLsessionIdGenerator variable to the value which was returned by the previous GET. If the SET on hicomSQLsessionIdGenerator succeeds (error status 'noError' is returned), the SQL session ID value is uniquely assigned to the requesting manager application. Further, the agent did create a corresponding entry in the hicomSQLsessionTable having hicomSQLsessionId set to the SQL session ID value used with the SET. If the SET on hicomSQLsessionIdGenerator fails (error status 'inconsistenValue' is returned) the same value was read by another manager and this one just claimed his SQL session ID by performing successfully a SET. In this case no entry is created in the hicomSQLsessionTable. To get and claim a unique SQL session ID, the manager application has to redo the GET and SET operation cycle on hicomSQLsessionIdGenerator. NOTE: using this and other hicomSQL objects is reserved for Siemens internal use ONLY. No documentation on this interface is available for customers.
Status: current	Access: read-write
OBJECT-TYPE
	TestAndIncr

hicomSQLsessionTable		1.3.6.1.4.1.231.7.2.1.8.2
This table describes all currently active SQL sessions. An entry is generated after a new session ID is read and claimed by a manager application (see hicomSQLsessionIdGenerator). An entry is deleted from the table when its timeout (see hicomSQLsessionTimeout) - which is restarted with each access on hicomSQLresultData - expires. The state of a new created entry initially is idle(1). The manager must then SET hicomSQLsessionStatement and hicomSQLsessionWhereClause, optionally may set hicomSQLsessionTimeout, and then SET hicomSQLsessionState to run(2). The completion of a session will be indicated to the manager via a hicomSQLsessionFinished trap.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomSQLsessionEntry

hicomSQLsessionEntry		1.3.6.1.4.1.231.7.2.1.8.2.1
An entry in the hicomSQLsessionTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomSQLsessionEntry

hicomSQLsessionId		1.3.6.1.4.1.231.7.2.1.8.2.1.1
Unique identifier of the SQL session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSQLsessionState		1.3.6.1.4.1.231.7.2.1.8.2.1.2
Indicates current state of the SQL session: idle: entry/session has been created by the agent and has to be initialized by the manager. run: to be set by the manager to initiate the execution of the SQL query. error: execution of the SQL query resulted in an error valid: execution of the SQL query was successful. Transitions: idle -> run -> {valid, error}
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(1), run(2), error(4), valid(5)

hicomSQLsessionStatement		1.3.6.1.4.1.231.7.2.1.8.2.1.3
Selects the predefined SQL statement for this session.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hicomSQLsessionWhereClause		1.3.6.1.4.1.231.7.2.1.8.2.1.4
The WHERE clause to be used for this SQL statement.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

hicomSQLsessionTimeout		1.3.6.1.4.1.231.7.2.1.8.2.1.5
Maximum time interval between any two succeeding retrievals to the result data of the session. If no access is made to the to the result data of the session within SQLsessionTimeout, the session and the related result data will be erased. SQLSessionTimeout is messured in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	10..86400

hicomSQLsessionResultSize		1.3.6.1.4.1.231.7.2.1.8.2.1.6
The result of a SQL query is stored in result file. hicomSQLsessionResultSize specifies the size in number of octets of the result file.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSQLsessionResultNoLines		1.3.6.1.4.1.231.7.2.1.8.2.1.7
The result of a SQL query is stored in result file. hicomSQLsessionResultNoLines specifies the number of lines in the result file.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSQLresultTable		1.3.6.1.4.1.231.7.2.1.8.3
This table contains the results of finished SQL sessions.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomSQLresultEntry

hicomSQLresultEntry		1.3.6.1.4.1.231.7.2.1.8.3.1
An entry in the hicomSQLresultTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomSQLresultEntry

hicomSQLresultId		1.3.6.1.4.1.231.7.2.1.8.3.1.1
Session ID to which these results belong.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSQLresultBlockNo		1.3.6.1.4.1.231.7.2.1.8.3.1.2
Identifier of the data block to be returned from the result file. The result file is logically segmented in blocks of 256 octets. Data from the result file is read by GET in block units. Each GET will return one block specified by BlockNo. A GET on BlockNo '0' will return octet 0 to 255 of the result file and a GET on BlockNo '1' octet 256 to 511 etc. If the first or last block is smaller then 256 octets, then a corresponding smaller hicomSQLresultData block will be returned.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSQLresultData		1.3.6.1.4.1.231.7.2.1.8.3.1.3
Requested block of result data.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomSQLinfo		1.3.6.1.4.1.231.7.2.1.8.4
OBJECT IDENTIFIER

hicomSQLSubagentLastMsgNo		1.3.6.1.4.1.231.7.2.1.8.4.1
The last message, warning or error number issued by the SQL subagent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomSQLSubagentLastMsgText		1.3.6.1.4.1.231.7.2.1.8.4.2
The last message, warning or error text issued by the SQL subagent.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomSQLsessionGroup		1.3.6.1.4.1.231.7.2.1.20.1.8.1
Conformance statement for hicomSQLsessionGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomSQLresultGroup		1.3.6.1.4.1.231.7.2.1.20.1.8.2
Conformance statement for hicomSQLresultGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomSQLinfoGroup		1.3.6.1.4.1.231.7.2.1.20.1.8.3
Conformance statement for hicomSQLinfoGroup.
Status: current	Access: read-only
OBJECT-GROUP

internalMessageSQLSubagent		1.3.6.1.4.1.231.7.2.1.21.2.8.0
An internalMessage trap contains an informational message generated by the subagent.
Status: current	Access: read-only
NOTIFICATION-TYPE

internalWarningSQLSubagent		1.3.6.1.4.1.231.7.2.1.21.2.8.1
An internalWarning trap contains a warning message generated by a subagent.
Status: current	Access: read-only
NOTIFICATION-TYPE

internalErrorSQLSubagent		1.3.6.1.4.1.231.7.2.1.21.2.8.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
Status: current	Access: read-only
NOTIFICATION-TYPE

hicomSQLsessionFinished		1.3.6.1.4.1.231.7.2.1.21.2.8.20
A hicomSQLsessionFinished trap indicates the completion of an SQL query. If hicomSQLsessionState indicates an error in the query, hicomSQLsessionResultLines will contain the SQL error code instead of the number of resulting lines. In this case, no entry in the hicomSQLresultTable will be created.
Status: current	Access: read-only
NOTIFICATION-TYPE

hicomDiscovTable		1.3.6.1.4.1.231.7.2.1.9.1
This table contains information about the master discoveries for each managed Hicom. Starting a master discoveries will lead to the individual discoveries being started. The termination of these discoveries will be signalled through their respective traps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HicomDiscovEntry

hicomDiscovEntry		1.3.6.1.4.1.231.7.2.1.9.1.1
Each entry describes the master discovery for a specific hicom.
Status: current	Access: not-accessible
OBJECT-TYPE
	HicomDiscovEntry

hicomDiscovPabxId		1.3.6.1.4.1.231.7.2.1.9.1.1.1
Unique identifier of the Hicom being discovered.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomDiscovPabxMnemonic		1.3.6.1.4.1.231.7.2.1.9.1.1.2
Name of the Hicom.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomDiscovStatus		1.3.6.1.4.1.231.7.2.1.9.1.1.3
Status of master discovery process.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryStates

hicomDiscovMode		1.3.6.1.4.1.231.7.2.1.9.1.1.4
Mode of master discovery process.
Status: current	Access: read-write
OBJECT-TYPE
	DiscoveryModes

hicomDiscovTimDat		1.3.6.1.4.1.231.7.2.1.9.1.1.5
Date and time of the last successful discovery.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomDiscovErrTimDat		1.3.6.1.4.1.231.7.2.1.9.1.1.6
Date and time of the last failed discovery.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hicomDiscInfo		1.3.6.1.4.1.231.7.2.1.9.2
OBJECT IDENTIFIER

hicomDiscSubagentLastMsgNo		1.3.6.1.4.1.231.7.2.1.9.2.1
The last message, warning or error number issued by the discovery subagent.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hicomDiscSubagentLastMsgText		1.3.6.1.4.1.231.7.2.1.9.2.2
The last message, warning or error text issued by the discovery subagent.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hicomDiscovGroup		1.3.6.1.4.1.231.7.2.1.20.1.9.1
Conformance statement for hicomDiscovGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomDiscInfoGroup		1.3.6.1.4.1.231.7.2.1.20.1.9.2
Conformance statement for hicomDiscinfoGroup.
Status: current	Access: read-only
OBJECT-GROUP

hicomEDTrpPabxId		1.3.6.1.4.1.231.7.2.1.21.1.9.1
Unique identifier of a Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hicomEDTrpPabxMnemonic		1.3.6.1.4.1.231.7.2.1.21.1.9.2
Mnemonic name of the Hicom system.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString

internalMessageDiscSubagent		1.3.6.1.4.1.231.7.2.1.21.2.9.0
An internalMessage trap contains an informational message generated by the subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalWarningDiscSubagent		1.3.6.1.4.1.231.7.2.1.21.2.9.1
An internalWarning trap contains a warning message generated by a subagent.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

internalErrorDiscSubagent		1.3.6.1.4.1.231.7.2.1.21.2.9.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomErrDeleteSucc		1.3.6.1.4.1.231.7.2.1.21.2.9.10
A hicomErrDeleteSucc trap indicates the successful termination of an Error Message Delete process. hicomErrDeletePabxId indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomErrDeleteErr		1.3.6.1.4.1.231.7.2.1.21.2.9.11
A hicomErrDeleteErr trap signifies the unsuccessful termination of an Error Message Delete process. hicomErrDeletePabxId indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE

hicomErrDeleteBusy		1.3.6.1.4.1.231.7.2.1.21.2.9.19
A hicomErrDeleteBusy trap signifies that an Error Message Delete process is running. hicomErrDeletePabxId indicates the Pbx involved.
Status: current	Access: not-accessible
NOTIFICATION-TYPE