SITEBOSS-571-STD-MIB

File: SITEBOSS-571-STD-MIB.mib (610738 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI ASENTRIA-ROOT-MIB

Imported symbols

DisplayString IpAddress TimeTicks
Integer32 MODULE-IDENTITY NOTIFICATION-TYPE
OBJECT-TYPE asentria

Defined Types

ESPointConfigTemp  
SEQUENCE    
  espcTempIndexES Integer32
  espcTempIndexPoint Integer32
  espcTempEnable DisplayString
  espcTempScale DisplayString
  espcTempDeadband DisplayString
  espcTempVHighTemp DisplayString
  espcTempVHighActions DisplayString
  espcTempVHighTrapnum Integer32
  espcTempVHighClass DisplayString
  espcTempHighTemp DisplayString
  espcTempHighActions DisplayString
  espcTempHighTrapnum Integer32
  espcTempHighClass DisplayString
  espcTempNormalActions DisplayString
  espcTempNormalTrapnum Integer32
  espcTempNormalClass DisplayString
  espcTempLowTemp DisplayString
  espcTempLowActions DisplayString
  espcTempLowTrapnum Integer32
  espcTempLowClass DisplayString
  espcTempVLowTemp DisplayString
  espcTempVLowActions DisplayString
  espcTempVLowTrapnum Integer32
  espcTempVLowClass DisplayString

ESPointConfigCC  
SEQUENCE    
  espcCCIndexES Integer32
  espcCCIndexPoint Integer32
  espcCCEnable DisplayString
  espcCCName DisplayString
  espcCCEventState DisplayString
  espcCCThreshold Integer32
  espcCCEventActions DisplayString
  espcCCEventTrapnum Integer32
  espcCCEventClass DisplayString
  espcCCNormalActions DisplayString
  espcCCNormalTrapnum Integer32
  espcCCNormalClass DisplayString
  espcCCAlarmAlias DisplayString
  espcCCNormalAlias DisplayString
  espcCCNormalThreshold Integer32
  espcCCOverrideGlobalReminder DisplayString
  espcCCReminderInterval Integer32

ESPointConfigHumid  
SEQUENCE    
  espcHumidIndexES Integer32
  espcHumidIndexPoint Integer32
  espcHumidEnable DisplayString
  espcHumidDeadband Integer32
  espcHumidVHighHumid Integer32
  espcHumidVHighActions DisplayString
  espcHumidVHighTrapnum Integer32
  espcHumidVHighClass DisplayString
  espcHumidHighHumid Integer32
  espcHumidHighActions DisplayString
  espcHumidHighTrapnum Integer32
  espcHumidHighClass DisplayString
  espcHumidNormalActions DisplayString
  espcHumidNormalTrapnum Integer32
  espcHumidNormalClass DisplayString
  espcHumidLowHumid Integer32
  espcHumidLowActions DisplayString
  espcHumidLowTrapnum Integer32
  espcHumidLowClass DisplayString
  espcHumidVLowHumid Integer32
  espcHumidVLowActions DisplayString
  espcHumidVLowTrapnum Integer32
  espcHumidVLowClass DisplayString

ESPointConfigAnalogInput  
SEQUENCE    
  espcAIIndexES Integer32
  espcAIIndexPoint Integer32
  espcAIEnable DisplayString
  espcAIDeadband DisplayString
  espcAIVhighValue DisplayString
  espcAIVhighActions DisplayString
  espcAIVhighTrapnum Integer32
  espcAIVhighClass DisplayString
  espcAIHighValue DisplayString
  espcAIHighActions DisplayString
  espcAIHighTrapnum Integer32
  espcAIHighClass DisplayString
  espcAINormalActions DisplayString
  espcAINormalTrapnum Integer32
  espcAINormalClass DisplayString
  espcAILowValue DisplayString
  espcAILowActions DisplayString
  espcAILowTrapnum Integer32
  espcAILowClass DisplayString
  espcAIVlowValue DisplayString
  espcAIVlowActions DisplayString
  espcAIVlowTrapnum Integer32
  espcAIVlowClass DisplayString
  espcAIConvUnitName DisplayString
  espcAIConvHighValue DisplayString
  espcAIConvHighUnit DisplayString
  espcAIConvLowValue DisplayString
  espcAIConvLowUnit DisplayString
  espcAIDisplayFormat DisplayString

ActionCallNumberConfig  
SEQUENCE    
  actionCallNumberIndex Integer32
  actionCallNumber DisplayString

ActionPagerConfig  
SEQUENCE    
  actionPagerIndex Integer32
  actionPagerType DisplayString
  actionPagerNumber DisplayString
  actionPagerID DisplayString
  actionPagerMessage DisplayString
  actionPagerPostCalloutDelay Integer32
  actionPagerPostIDDelay Integer32

ESPointConfigOutput  
SEQUENCE    
  espcOutputIndexES Integer32
  espcOutputIndexPoint Integer32
  espcOutputEnable DisplayString
  espcOutputActiveState DisplayString
  espcOutputType DisplayString
  espcOutputAliasValue DisplayString
  espcOutputAliasColor DisplayString
  espcOutputActiveAlias DisplayString
  espcOutputActiveColor DisplayString
  espcOutputActiveActions DisplayString
  espcOutputActiveTrapnum Integer32
  espcOutputActiveClass DisplayString
  espcOutputInactiveAlias DisplayString
  espcOutputInactiveColor DisplayString
  espcOutputInactiveActions DisplayString
  espcOutputInactiveTrapnum Integer32
  espcOutputInactiveClass DisplayString

EventClassConfig  
SEQUENCE    
  evClassNameIndex Integer32
  evClassName DisplayString

RTSFileConfig  
SEQUENCE    
  rtsFileIndex Integer32
  rtsFileMode DisplayString
  rtsFileShowAnswer DisplayString
  rtsFileReqXON DisplayString
  rtsFileTimeout Integer32
  rtsFileEmptyClose DisplayString
  rtsFilePushHost DisplayString
  rtsFilePushPort Integer32
  rtsFilePushRetryTimer Integer32

ModemCLIDLogConfig  
SEQUENCE    
  modemCLIDLogIndex Integer32
  modemCLIDLogNumber DisplayString

PowerDistribOutputCurrent  
SEQUENCE    
  pdOutputCurrentIndex Integer32
  pdOutputCurrentInEventState DisplayString
  pdOutputCurrentValue Integer32
  pdOutputCurrentValueStr DisplayString
  pdOutputCurrentDeadband Integer32
  pdOutputCurrentVHighCurrent Integer32
  pdOutputCurrentHighCurrent Integer32
  pdOutputCurrentLowCurrent Integer32
  pdOutputCurrentVLowCurrent Integer32

PowerDistribOutputFuse  
SEQUENCE    
  pdOutputFuseIndex Integer32
  pdOutputFuseInEventState DisplayString
  pdOutputFuseValueStr DisplayString

PowerDistribNextGen  
SEQUENCE    
  pdnIndexPD Integer32
  pdnIndexOutput Integer32
  pdnConfig DisplayString
  pdnMainCurrentInEventState DisplayString
  pdnMainCurrentValue Integer32
  pdnMainCurrentValueStr DisplayString
  pdnMainCurrentDeadband Integer32
  pdnMainCurrentVHighCurrent Integer32
  pdnMainCurrentHighCurrent Integer32
  pdnMainCurrentLowCurrent Integer32
  pdnMainCurrentVLowCurrent Integer32
  pdnMainVoltageInEventState DisplayString
  pdnMainVoltageValue Integer32
  pdnMainVoltageValueStr DisplayString
  pdnMainVoltageDeadband Integer32
  pdnMainVoltageVHighVoltage Integer32
  pdnMainVoltageHighVoltage Integer32
  pdnMainVoltageLowVoltage Integer32
  pdnMainVoltageVLowVoltage Integer32
  pdnMainPowerValue Integer32
  pdnMainPowerValueStr DisplayString
  pdnOutputCurrentInEventState DisplayString
  pdnOutputCurrentValue Integer32
  pdnOutputCurrentValueStr DisplayString
  pdnOutputCurrentDeadband Integer32
  pdnOutputCurrentVHighCurrent Integer32
  pdnOutputCurrentHighCurrent Integer32
  pdnOutputCurrentLowCurrent Integer32
  pdnOutputCurrentVLowCurrent Integer32
  pdnOutputFuseInEventState DisplayString
  pdnOutputFuseValueStr DisplayString
  pdnMainCombinedStatus DisplayString
  pdnOutputCombinedStatusBlock1 DisplayString
  pdnOutputCombinedStatusBlock2 DisplayString
  pdnDeviceCurrentValue Integer32
  pdnDeviceCurrentValueStr DisplayString

CPEConfig  
SEQUENCE    
  cpeIndex Integer32
  cpeHost DisplayString
  cpeName DisplayString
  cpeDescription DisplayString
  cpeKeepalive Integer32
  cpeThreshold Integer32
  cpeEventReminderInterval Integer32
  cpeKeepaliveTicks Integer32
  cpePingSize Integer32
  cpeInfoReset Integer32
  cpeInfoNumReq Integer32
  cpeInfoNumGoodResp Integer32
  cpeInfoNumBadResp Integer32
  cpeInfoNumLostResp Integer32
  cpeInfoPercentLoss DisplayString
  cpeInfoPercentBad DisplayString

ScriptingConfig  
SEQUENCE    
  scrIndex Integer32
  scrEnable DisplayString
  scrName DisplayString
  scrFilename DisplayString
  scrRunAlways DisplayString
  scrRunAtStartup DisplayString
  scrRunScheduled DisplayString
  scrScheduleTime DisplayString
  scrArguments DisplayString
  scrRepeatInterval Integer32

ScriptingDTRCtrlPortEnableConfig  
SEQUENCE    
  scrDTRCtrlPortEnableIndex Integer32
  scrDTRCtrlPortEnable DisplayString

ScriptingVolatileString  
SEQUENCE    
  scrVolatileStringIndex Integer32
  scrVolatileString DisplayString

ScriptingVolatileInt  
SEQUENCE    
  scrVolatileIntIndex Integer32
  scrVolatileInt Integer32

ScriptingNonVolatileString  
SEQUENCE    
  scrNonVolatileStringIndex Integer32
  scrNonVolatileString DisplayString

ScriptingNonVolatileInt  
SEQUENCE    
  scrNonVolatileIntIndex Integer32
  scrNonVolatileInt Integer32

CRDBFileEnforceMinConfig  
SEQUENCE    
  sysCRDBFileEnforceMinIndex Integer32
  sysCRDBFileEnforceMin DisplayString

CRDBFileIDConfig  
SEQUENCE    
  sysCRDBFileIDIndex Integer32
  sysCRDBFileID DisplayString

NetworkTimeHostConfig  
SEQUENCE    
  sysTimeNetHostIndex Integer32
  sysTimeNetHost DisplayString

ActionHostConfig  
SEQUENCE    
  actionHostIndex Integer32
  actionHost DisplayString

ActionEmailConfig  
SEQUENCE    
  actionEmailIndex Integer32
  actionEmail DisplayString

FileEnforceMinimumConfig  
SEQUENCE    
  sysCRDBFileEnforceMinIndex Integer32
  sysCRDBFileEnforceMin DisplayString

SerialHandshakingLowEventConfig  
SEQUENCE    
  evShskLowIndex Integer32
  evShskLowEnable DisplayString
  evShskLowActions DisplayString
  evShskLowMessage DisplayString
  evShskLowClass DisplayString
  evShskLowTrapNum Integer32

SerialHandshakingHighEventConfig  
SEQUENCE    
  evShskHighIndex Integer32
  evShskHighEnable DisplayString
  evShskHighActions DisplayString
  evShskHighMessage DisplayString
  evShskHighClass DisplayString
  evShskHighTrapNum Integer32

NoDataEvent1PortEnableConfig  
SEQUENCE    
  evNoData1PortEnableIndex Integer32
  evNoData1PortEnable DisplayString

NoDataEvent2PortEnableConfig  
SEQUENCE    
  evNoData2PortEnableIndex Integer32
  evNoData2PortEnable DisplayString

DataEventMacroConfig  
SEQUENCE    
  evdMacroIndex Integer32
  evdMacroName DisplayString
  evdMacroEquation DisplayString

DataEventFieldConfig  
SEQUENCE    
  evdFieldIndex Integer32
  evdFieldStart Integer32
  evdFieldLength Integer32
  evdFieldName DisplayString
  evdFieldLine Integer32
  evdFieldType DisplayString

DataEventConfig  
SEQUENCE    
  evdIndex Integer32
  evdEnable DisplayString
  evdName DisplayString
  evdEquation DisplayString
  evdThreshold Integer32
  evdAutoClear DisplayString
  evdClearInterval DisplayString
  evdClearTime DisplayString
  evdActions DisplayString
  evdClass DisplayString
  evdTrapNum Integer32
  evdMode DisplayString

SecUserConfig  
SEQUENCE    
  secUserIndex Integer32
  secUserEnable DisplayString
  secUserConnectVia DisplayString
  secUserLoginTo DisplayString
  secUserAccessFile DisplayString
  secUserPTEscapeTo DisplayString
  secUserPPPType DisplayString
  secUserRights DisplayString
  secUserEventsReadAccess DisplayString
  secUserAuditReadAccess DisplayString
  secUserEventsWriteAccess DisplayString
  secUserAuditWriteAccess DisplayString
  secUserExpiration DisplayString
  secUserCallbackNumber1 DisplayString
  secUserCallbackNumber2 DisplayString
  secUserCallbackNumber3 DisplayString
  secUserChallengeTelnetMode DisplayString
  secUserChallengeModemMode DisplayString
  secUserChallengeConsoleMode DisplayString
  secUserChallengeTelnetSendTo DisplayString
  secUserChallengeModemSendTo DisplayString
  secUserChallengeExpiration Integer32

ModemCLIDNumberConfig  
SEQUENCE    
  modemCLIDNumberIndex Integer32
  modemCLIDNumber DisplayString

RouteTestConfig  
SEQUENCE    
  routeTestAddressIndex Integer32
  routeTestAddress DisplayString

IPRestrictionConfig  
SEQUENCE    
  ipRestrictionIndex Integer32
  ipRestrictionEnable DisplayString
  ipRestrictionMask DisplayString

DNSConfig  
SEQUENCE    
  dnsIndex Integer32
  dnsAddress IpAddress

HostConfig  
SEQUENCE    
  hostIndex Integer32
  hostDeclaration DisplayString

SNMPPollRequestConfig  
SEQUENCE    
  snmpPRequestIndex Integer32
  snmpPRequestDescription DisplayString
  snmpPRequestAgent DisplayString
  snmpPRequestReadcom DisplayString
  snmpPRequestOID DisplayString
  snmpPRequestPeriod Integer32
  snmpPRequestID DisplayString
  snmpPRequestThreshold DisplayString
  snmpPRequestResultStatus DisplayString
  snmpPRequestResultValue DisplayString
  snmpPRequestResultTime DisplayString
  snmpPRequestResultType DisplayString

FTPPushPushFileConfig  
SEQUENCE    
  ftpPushPushFileIndex Integer32
  ftpPushPushFile DisplayString

FTPPushRemoteFileConfig  
SEQUENCE    
  ftpPushRemoteFileIndex Integer32
  ftpPushRemoteFileName DisplayString

PortConfig  
SEQUENCE    
  portConfigIndex Integer32
  portConfigBaud Integer32
  portConfigDataFormat Integer32
  portConfigStripPtOutputLfs Integer32
  portConfigStripPtInputLfs Integer32
  portConfigMaskEnable Integer32
  portConfigDAEnable Integer32
  portConfigStoreAlarmsDPT DisplayString
  portConfigRecordTimeout Integer32
  portConfigDataType DisplayString
  portConfigEtxToCRLF DisplayString
  portConfigMLREnable DisplayString
  portConfigMLRStartField1Pos Integer32
  portConfigMLRStartField1Text DisplayString
  portConfigMLRStartField2Pos Integer32
  portConfigMLRStartField2Text DisplayString
  portConfigMLRNumLinesBefore Integer32
  portConfigMLREndDetection DisplayString
  portConfigMLRLineCount Integer32
  portConfigMLREndField1Pos Integer32
  portConfigMLREndField1Text DisplayString
  portConfigMLREndField2Pos Integer32
  portConfigMLREndField2Text DisplayString
  portConfigMLRUseComplexRules DisplayString
  portConfigBufferPT DisplayString
  portConfigId DisplayString
  portConfigMode DisplayString
  portConfigHsk DisplayString

ESPoint  
SEQUENCE    
  esIndexES Integer32
  esIndexPC Integer32
  esIndexPoint Integer32
  esPointName DisplayString
  esPointInEventState Integer32
  esPointValueInt Integer32
  esPointValueStr DisplayString
  esPointTimeLastChange DisplayString
  esPointTimetickLastChange TimeTicks

ESExist  
SEQUENCE    
  esIndex Integer32
  esName DisplayString
  esID DisplayString
  esNumberTempSensors Integer32
  esTempReportingMode DisplayString
  esNumberCCs Integer32
  esCCReportingMode DisplayString
  esNumberHumidSensors Integer32
  esHumidReportingMode DisplayString
  esNumberNoiseSensors Integer32
  esNoiseReportingMode DisplayString
  esNumberAirflowSensors Integer32
  esAirflowReportingMode DisplayString
  esNumberAnalog Integer32
  esAnalogReportingMode DisplayString
  esNumberOutputs Integer32
  esOutputReportingMode DisplayString
  esTempCombinedStatus DisplayString
  esCCCombinedStatusBlock1 DisplayString
  esCCCombinedStatusBlock2 DisplayString
  esCCCombinedStatusBlock3 DisplayString
  esCCCombinedStatusBlock4 DisplayString
  esCCCombinedStatusBlock5 DisplayString
  esCCCombinedStatusBlock6 DisplayString
  esCCCombinedStatusBlock7 DisplayString
  esCCCombinedStatusBlock8 DisplayString
  esHumidCombinedStatus DisplayString
  esAnalogCombinedStatusBlock1 DisplayString
  esAnalogCombinedStatusBlock2 DisplayString
  esAnalogCombinedStatusBlock3 DisplayString
  esAnalogCombinedStatusBlock4 DisplayString
  esAnalogCombinedStatusBlock5 DisplayString
  esAnalogCombinedStatusBlock6 DisplayString
  esOutputCombinedStatusBlock1 DisplayString
  esOutputCombinedStatusBlock2 DisplayString

DEStatus  
SEQUENCE    
  deStatusIndex Integer32
  deStatusName DisplayString
  deStatusCounter Integer32
  deStatusThreshold Integer32

AISGALD  
SEQUENCE    
  aisgsALDIndex Integer32
  aisgsALDSectorID DisplayString
  aisgsALDType DisplayString
  aisgsALDDescription DisplayString
  aisgsALDStatus DisplayString
  aisgsALDID DisplayString
  aisgsALDTilt DisplayString
  aisgsALDHwVersion DisplayString
  aisgsALDSwVersion DisplayString
  aisgsALDModel DisplayString
  aisgsALDAntennaModel DisplayString
  aisgsALDMinTilt DisplayString
  aisgsALDMaxTilt DisplayString
  aisgsALDAISGVersion DisplayString

AISGFile  
SEQUENCE    
  aisgsFileIndex Integer32
  aisgsFileName DisplayString
  aisgsFileType DisplayString
  aisgsFileVersion DisplayString

AISGAuto  
SEQUENCE    
  aisgsAutoIndex Integer32
  aisgsAutoVendor DisplayString
  aisgsAutoALDModel DisplayString
  aisgsAutoSoftware DisplayString
  aisgsAutoConfig DisplayString
  aisgsAutoTilt DisplayString

AISGAAA  
SEQUENCE    
  aisgsAAAIndex Integer32
  aisgsAAAALDID DisplayString
  aisgsAAAAntennaSN DisplayString
  aisgsAAASectorID DisplayString

FSStatus  
SEQUENCE    
  fsStatusIndex Integer32
  fsStatusName DisplayString
  fsStatusDeviceState DisplayString
  fsStatusVolumeValueString DisplayString
  fsStatusVolumePercentLevel DisplayString
  fsStatusVolumeInEventState DisplayString
  fsStatusCombined DisplayString

ACPMStatus  
SEQUENCE    
  acpmsIndex Integer32
  acpmsName DisplayString
  acpmsAvgVoltageValueStr DisplayString
  acpmsAvgVoltageMinStr DisplayString
  acpmsAvgVoltageMaxStr DisplayString
  acpmsAvgVoltageAvgStr DisplayString
  acpmsAvgVoltageInEventState DisplayString
  acpmsVoltagePhaseAValueStr DisplayString
  acpmsVoltagePhaseBValueStr DisplayString
  acpmsVoltagePhaseCValueStr DisplayString
  acpmsAvgCurrentValueStr DisplayString
  acpmsAvgCurrentMinStr DisplayString
  acpmsAvgCurrentMaxStr DisplayString
  acpmsAvgCurrentAvgStr DisplayString
  acpmsAvgCurrentInEventState DisplayString
  acpmsCurrentPhaseAValueStr DisplayString
  acpmsCurrentPhaseBValueStr DisplayString
  acpmsCurrentPhaseCValueStr DisplayString
  acpmsAvgFreqValueStr DisplayString
  acpmsAvgFreqMinStr DisplayString
  acpmsAvgFreqMaxStr DisplayString
  acpmsAvgFreqAvgStr DisplayString
  acpmsAvgFreqInEventState DisplayString
  acpmsTRPValueStr DisplayString
  acpmsTRPMinStr DisplayString
  acpmsTRPMaxStr DisplayString
  acpmsTRPAvgStr DisplayString
  acpmsTRPInEventState DisplayString
  acpmsRPPhaseAValueStr DisplayString
  acpmsRPPhaseBValueStr DisplayString
  acpmsRPPhaseCValueStr DisplayString
  acpmsCombined DisplayString
  acpmsTPFValueStr DisplayString
  acpmsTPFMinStr DisplayString
  acpmsTPFMaxStr DisplayString
  acpmsTPFAvgStr DisplayString
  acpmsTPFInEventState DisplayString
  acpmsPFPhaseAValueStr DisplayString
  acpmsPFPhaseBValueStr DisplayString
  acpmsPFPhaseCValueStr DisplayString
  acpmsTRcPValueStr DisplayString
  acpmsTRcPMinStr DisplayString
  acpmsTRcPMaxStr DisplayString
  acpmsTRcPAvgStr DisplayString
  acpmsRcPPhaseAValueStr DisplayString
  acpmsRcPPhaseBValueStr DisplayString
  acpmsRcPPhaseCValueStr DisplayString
  acpmsTAPValueStr DisplayString
  acpmsTAPMinStr DisplayString
  acpmsTAPMaxStr DisplayString
  acpmsTAPAvgStr DisplayString
  acpmsAPPhaseAValueStr DisplayString
  acpmsAPPhaseBValueStr DisplayString
  acpmsAPPhaseCValueStr DisplayString
  acpmsTotalEnergyWh Integer32
  acpmsTotalEnergyVAR Integer32
  acpmsTotalEnergyVA Integer32

FuelSensorConfigGeneral  
SEQUENCE    
  fsGenIndex Integer32
  fsGenName DisplayString
  fsGenSensorType DisplayString
  fsGenDistanceUnit DisplayString
  fsGenRawValueTop DisplayString
  fsGenTopOffset DisplayString
  fsGenRawValueBottom DisplayString
  fsGenBottomOffset DisplayString
  fsGenInputES Integer32
  fsGenInputPoint Integer32
  fsGenFilterAveraging Integer32
  fsGenSysrepEnable DisplayString
  fsGenSysrepThreshold DisplayString
  fsGenSysrepLimit Integer32
  fsGenSysrepPackage Integer32
  fsGenSysrepType DisplayString
  fsGenEnable DisplayString

FuelSensorConfigTank  
SEQUENCE    
  fsTankIndex Integer32
  fsTankHeight DisplayString
  fsTankDimA DisplayString
  fsTankDimB DisplayString
  fsTankVolume DisplayString
  fsTankVolumeUnit DisplayString
  fsTankShape DisplayString

FuelSensorConfigCustomTankStrapping  
SEQUENCE    
  fsCustomTankIndexFS Integer32
  fsCustomTankIndexDatum Integer32
  fsCustomTankHeight DisplayString
  fsCustomTankVolume DisplayString

FuelSensorConfigVolume  
SEQUENCE    
  fsVolumeIndex Integer32
  fsVolumeEnable DisplayString
  fsVolumeDeadband DisplayString
  fsVolumeVHighValue DisplayString
  fsVolumeVHighActions DisplayString
  fsVolumeVHighTrapNum Integer32
  fsVolumeVHighClass DisplayString
  fsVolumeHighValue DisplayString
  fsVolumeHighActions DisplayString
  fsVolumeHighTrapNum Integer32
  fsVolumeHighClass DisplayString
  fsVolumeNormalActions DisplayString
  fsVolumeNormalTrapNum Integer32
  fsVolumeNormalClass DisplayString
  fsVolumeLowValue DisplayString
  fsVolumeLowActions DisplayString
  fsVolumeLowTrapNum Integer32
  fsVolumeLowClass DisplayString
  fsVolumeVLowValue DisplayString
  fsVolumeVLowActions DisplayString
  fsVolumeVLowTrapNum Integer32
  fsVolumeVLowClass DisplayString

FuelSensorConfigDisconnect  
SEQUENCE    
  fsDiscIndex Integer32
  fsDiscEnable DisplayString
  fsDiscHighValue DisplayString
  fsDiscLowValue DisplayString
  fsDiscActions DisplayString
  fsDiscTrapNum Integer32
  fsDiscClass DisplayString
  fsDiscNormalActions DisplayString
  fsDiscNormalTrapNum Integer32
  fsDiscNormalClass DisplayString

ACPMConfigGeneral  
SEQUENCE    
  acpmGenIndex Integer32
  acpmGenDevice DisplayString
  acpmGenName DisplayString
  acpmGenAddress Integer32
  acpmGenPtRatio Integer32
  acpmGenCtRatio Integer32
  acpmGenPowerType DisplayString
  acpmGenSysrepPackage Integer32
  acpmGenSysrepType DisplayString
  acpmGenEnable DisplayString

ACPMConfigAvgVoltage  
SEQUENCE    
  acpmAvgVoltageIndex Integer32
  acpmAvgVoltageEnable DisplayString
  acpmAvgVoltageDeadband DisplayString
  acpmAvgVoltageVHighValue DisplayString
  acpmAvgVoltageVHighActions DisplayString
  acpmAvgVoltageVHighTrapNum Integer32
  acpmAvgVoltageVHighClass DisplayString
  acpmAvgVoltageHighValue DisplayString
  acpmAvgVoltageHighActions DisplayString
  acpmAvgVoltageHighTrapNum Integer32
  acpmAvgVoltageHighClass DisplayString
  acpmAvgVoltageNormalActions DisplayString
  acpmAvgVoltageNormalTrapNum Integer32
  acpmAvgVoltageNormalClass DisplayString
  acpmAvgVoltageLowValue DisplayString
  acpmAvgVoltageLowActions DisplayString
  acpmAvgVoltageLowTrapNum Integer32
  acpmAvgVoltageLowClass DisplayString
  acpmAvgVoltageVLowValue DisplayString
  acpmAvgVoltageVLowActions DisplayString
  acpmAvgVoltageVLowTrapNum Integer32
  acpmAvgVoltageVLowClass DisplayString
  acpmAvgVoltageSysrepEnable DisplayString
  acpmAvgVoltageSysrepThreshold DisplayString
  acpmAvgVoltageSysrepLimit Integer32

ACPMConfigAvgCurrent  
SEQUENCE    
  acpmAvgCurrentIndex Integer32
  acpmAvgCurrentEnable DisplayString
  acpmAvgCurrentDeadband DisplayString
  acpmAvgCurrentVHighValue DisplayString
  acpmAvgCurrentVHighActions DisplayString
  acpmAvgCurrentVHighTrapNum Integer32
  acpmAvgCurrentVHighClass DisplayString
  acpmAvgCurrentHighValue DisplayString
  acpmAvgCurrentHighActions DisplayString
  acpmAvgCurrentHighTrapNum Integer32
  acpmAvgCurrentHighClass DisplayString
  acpmAvgCurrentNormalActions DisplayString
  acpmAvgCurrentNormalTrapNum Integer32
  acpmAvgCurrentNormalClass DisplayString
  acpmAvgCurrentLowValue DisplayString
  acpmAvgCurrentLowActions DisplayString
  acpmAvgCurrentLowTrapNum Integer32
  acpmAvgCurrentLowClass DisplayString
  acpmAvgCurrentVLowValue DisplayString
  acpmAvgCurrentVLowActions DisplayString
  acpmAvgCurrentVLowTrapNum Integer32
  acpmAvgCurrentVLowClass DisplayString
  acpmAvgCurrentSysrepEnable DisplayString
  acpmAvgCurrentSysrepThreshold DisplayString
  acpmAvgCurrentSysrepLimit Integer32

ACPMConfigFreq  
SEQUENCE    
  acpmFreqIndex Integer32
  acpmFreqEnable DisplayString
  acpmFreqDeadband DisplayString
  acpmFreqVHighValue DisplayString
  acpmFreqVHighActions DisplayString
  acpmFreqVHighTrapNum Integer32
  acpmFreqVHighClass DisplayString
  acpmFreqHighValue DisplayString
  acpmFreqHighActions DisplayString
  acpmFreqHighTrapNum Integer32
  acpmFreqHighClass DisplayString
  acpmFreqNormalActions DisplayString
  acpmFreqNormalTrapNum Integer32
  acpmFreqNormalClass DisplayString
  acpmFreqLowValue DisplayString
  acpmFreqLowActions DisplayString
  acpmFreqLowTrapNum Integer32
  acpmFreqLowClass DisplayString
  acpmFreqVLowValue DisplayString
  acpmFreqVLowActions DisplayString
  acpmFreqVLowTrapNum Integer32
  acpmFreqVLowClass DisplayString
  acpmFreqSysrepEnable DisplayString
  acpmFreqSysrepThreshold DisplayString
  acpmFreqSysrepLimit Integer32

ACPMConfigTRP  
SEQUENCE    
  acpmTRPIndex Integer32
  acpmTRPEnable DisplayString
  acpmTRPDeadband DisplayString
  acpmTRPVHighValue DisplayString
  acpmTRPVHighActions DisplayString
  acpmTRPVHighTrapNum Integer32
  acpmTRPVHighClass DisplayString
  acpmTRPHighValue DisplayString
  acpmTRPHighActions DisplayString
  acpmTRPHighTrapNum Integer32
  acpmTRPHighClass DisplayString
  acpmTRPNormalActions DisplayString
  acpmTRPNormalTrapNum Integer32
  acpmTRPNormalClass DisplayString
  acpmTRPLowValue DisplayString
  acpmTRPLowActions DisplayString
  acpmTRPLowTrapNum Integer32
  acpmTRPLowClass DisplayString
  acpmTRPVLowValue DisplayString
  acpmTRPVLowActions DisplayString
  acpmTRPVLowTrapNum Integer32
  acpmTRPVLowClass DisplayString
  acpmTRPSysrepEnable DisplayString
  acpmTRPSysrepThreshold DisplayString
  acpmTRPSysrepLimit Integer32

ACPMConfigDisconnect  
SEQUENCE    
  acpmDisconnectIndex Integer32
  acpmDisconnectEnable DisplayString
  acpmDisconnectActions DisplayString
  acpmDisconnectTrapNum Integer32
  acpmDisconnectClass DisplayString
  acpmDisconnectNormalActions DisplayString
  acpmDisconnectNormalTrapNum Integer32
  acpmDisconnectNormalClass DisplayString

ACPMConfigTotalPowerFactor  
SEQUENCE    
  acpmTPFIndex Integer32
  acpmTPFEnable DisplayString
  acpmTPFDeadband DisplayString
  acpmTPFNormalActions DisplayString
  acpmTPFNormalTrapNum Integer32
  acpmTPFNormalClass DisplayString
  acpmTPFLowValue DisplayString
  acpmTPFLowActions DisplayString
  acpmTPFLowTrapNum Integer32
  acpmTPFLowClass DisplayString
  acpmTPFVLowValue DisplayString
  acpmTPFVLowActions DisplayString
  acpmTPFVLowTrapNum Integer32
  acpmTPFVLowClass DisplayString
  acpmTPFSysrepEnable DisplayString
  acpmTPFSysrepThreshold DisplayString
  acpmTPFSysrepLimit Integer32

Defined Values

s571 1.3.6.1.4.1.3052.14
MIB module for managing Asentria SiteBoss 571
MODULE-IDENTITY    

status 1.3.6.1.4.1.3052.14.1
OBJECT IDENTIFIER    

eventSensorStatus 1.3.6.1.4.1.3052.14.1.1
OBJECT IDENTIFIER    

dataEventStatus 1.3.6.1.4.1.3052.14.1.2
OBJECT IDENTIFIER    

powerDistributionStatus 1.3.6.1.4.1.3052.14.1.5
OBJECT IDENTIFIER    

pdMain 1.3.6.1.4.1.3052.14.1.5.2
OBJECT IDENTIFIER    

pdMainCurrent 1.3.6.1.4.1.3052.14.1.5.2.1
OBJECT IDENTIFIER    

pdMainVoltage 1.3.6.1.4.1.3052.14.1.5.2.2
OBJECT IDENTIFIER    

pdMainPower 1.3.6.1.4.1.3052.14.1.5.2.3
OBJECT IDENTIFIER    

pdOutput 1.3.6.1.4.1.3052.14.1.5.3
OBJECT IDENTIFIER    

pdOutputCurrent 1.3.6.1.4.1.3052.14.1.5.3.1
OBJECT IDENTIFIER    

pdOutputFuse 1.3.6.1.4.1.3052.14.1.5.3.4
OBJECT IDENTIFIER    

pdNextGen 1.3.6.1.4.1.3052.14.1.5.4
OBJECT IDENTIFIER    

pdSystem 1.3.6.1.4.1.3052.14.1.5.5
OBJECT IDENTIFIER    

fuelSensorStatus 1.3.6.1.4.1.3052.14.1.6
OBJECT IDENTIFIER    

wirelessModemStatus 1.3.6.1.4.1.3052.14.1.7
OBJECT IDENTIFIER    

acPowerMonitorStatus 1.3.6.1.4.1.3052.14.1.8
OBJECT IDENTIFIER    

aisgStatus 1.3.6.1.4.1.3052.14.1.9
OBJECT IDENTIFIER    

config 1.3.6.1.4.1.3052.14.2
OBJECT IDENTIFIER    

eventSensorBasics 1.3.6.1.4.1.3052.14.2.1
OBJECT IDENTIFIER    

eventSensorPointConfig 1.3.6.1.4.1.3052.14.2.2
OBJECT IDENTIFIER    

serialPorts 1.3.6.1.4.1.3052.14.2.3
OBJECT IDENTIFIER    

network 1.3.6.1.4.1.3052.14.2.4
OBJECT IDENTIFIER    

interface 1.3.6.1.4.1.3052.14.2.4.1
OBJECT IDENTIFIER    

ethernet 1.3.6.1.4.1.3052.14.2.4.1.1
OBJECT IDENTIFIER    

ethernet1 1.3.6.1.4.1.3052.14.2.4.1.1.1
OBJECT IDENTIFIER    

eth1VLAN 1.3.6.1.4.1.3052.14.2.4.1.1.1.5
OBJECT IDENTIFIER    

eth1VLAN1 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.1
OBJECT IDENTIFIER    

eth1VLAN2 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.2
OBJECT IDENTIFIER    

eth1VLAN3 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.3
OBJECT IDENTIFIER    

eth1VLAN4 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.4
OBJECT IDENTIFIER    

eth1VLAN5 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.5
OBJECT IDENTIFIER    

eth1VLAN6 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.6
OBJECT IDENTIFIER    

eth1IPv6 1.3.6.1.4.1.3052.14.2.4.1.1.1.7
OBJECT IDENTIFIER    

eth1IPv6Static 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.2
OBJECT IDENTIFIER    

eth1IPv6Auto 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.3
OBJECT IDENTIFIER    

ethernet2 1.3.6.1.4.1.3052.14.2.4.1.1.2
OBJECT IDENTIFIER    

eth2VLAN 1.3.6.1.4.1.3052.14.2.4.1.1.2.5
OBJECT IDENTIFIER    

eth2VLAN1 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.1
OBJECT IDENTIFIER    

eth2VLAN2 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.2
OBJECT IDENTIFIER    

eth2VLAN3 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.3
OBJECT IDENTIFIER    

eth2VLAN4 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.4
OBJECT IDENTIFIER    

eth2VLAN5 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.5
OBJECT IDENTIFIER    

eth2VLAN6 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.6
OBJECT IDENTIFIER    

eth2IPv6 1.3.6.1.4.1.3052.14.2.4.1.1.2.7
OBJECT IDENTIFIER    

eth2IPv6Static 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.2
OBJECT IDENTIFIER    

eth2IPv6Auto 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.3
OBJECT IDENTIFIER    

snmp 1.3.6.1.4.1.3052.14.2.4.8
OBJECT IDENTIFIER    

snmpNotificationTx 1.3.6.1.4.1.3052.14.2.4.8.7
OBJECT IDENTIFIER    

snmpPoll 1.3.6.1.4.1.3052.14.2.4.8.9
OBJECT IDENTIFIER    

ftpPush 1.3.6.1.4.1.3052.14.2.4.9
OBJECT IDENTIFIER    

ppp 1.3.6.1.4.1.3052.14.2.4.10
OBJECT IDENTIFIER    

pppDial 1.3.6.1.4.1.3052.14.2.4.10.1
OBJECT IDENTIFIER    

pppHost 1.3.6.1.4.1.3052.14.2.4.10.2
OBJECT IDENTIFIER    

routing 1.3.6.1.4.1.3052.14.2.4.11
OBJECT IDENTIFIER    

netSecurity 1.3.6.1.4.1.3052.14.2.4.12
OBJECT IDENTIFIER    

ipRestriction 1.3.6.1.4.1.3052.14.2.4.12.1
OBJECT IDENTIFIER    

rts 1.3.6.1.4.1.3052.14.2.4.13
OBJECT IDENTIFIER    

rtsAlarms 1.3.6.1.4.1.3052.14.2.4.13.2
OBJECT IDENTIFIER    

trap 1.3.6.1.4.1.3052.14.2.4.14
OBJECT IDENTIFIER    

trapInclude 1.3.6.1.4.1.3052.14.2.4.14.1
OBJECT IDENTIFIER    

routeTest 1.3.6.1.4.1.3052.14.2.4.15
OBJECT IDENTIFIER    

wireless 1.3.6.1.4.1.3052.14.2.4.16
OBJECT IDENTIFIER    

wirelessConnectivity 1.3.6.1.4.1.3052.14.2.4.16.20
OBJECT IDENTIFIER    

email 1.3.6.1.4.1.3052.14.2.4.17
OBJECT IDENTIFIER    

netAdvanced 1.3.6.1.4.1.3052.14.2.4.18
OBJECT IDENTIFIER    

web 1.3.6.1.4.1.3052.14.2.4.19
OBJECT IDENTIFIER    

ipv6 1.3.6.1.4.1.3052.14.2.4.21
OBJECT IDENTIFIER    

cpe 1.3.6.1.4.1.3052.14.2.4.22
OBJECT IDENTIFIER    

modem 1.3.6.1.4.1.3052.14.2.5
OBJECT IDENTIFIER    

modemClid 1.3.6.1.4.1.3052.14.2.5.8
OBJECT IDENTIFIER    

time 1.3.6.1.4.1.3052.14.2.8
OBJECT IDENTIFIER    

console 1.3.6.1.4.1.3052.14.2.10
OBJECT IDENTIFIER    

unitSecurity 1.3.6.1.4.1.3052.14.2.11
OBJECT IDENTIFIER    

secCore 1.3.6.1.4.1.3052.14.2.11.1
OBJECT IDENTIFIER    

secFactory 1.3.6.1.4.1.3052.14.2.11.3
OBJECT IDENTIFIER    

secSSH 1.3.6.1.4.1.3052.14.2.11.4
OBJECT IDENTIFIER    

secVPN 1.3.6.1.4.1.3052.14.2.11.5
OBJECT IDENTIFIER    

event 1.3.6.1.4.1.3052.14.2.12
OBJECT IDENTIFIER    

evCore 1.3.6.1.4.1.3052.14.2.12.1
OBJECT IDENTIFIER    

evLog 1.3.6.1.4.1.3052.14.2.12.1.3
OBJECT IDENTIFIER    

evMgmt 1.3.6.1.4.1.3052.14.2.12.1.4
OBJECT IDENTIFIER    

evData 1.3.6.1.4.1.3052.14.2.12.2
OBJECT IDENTIFIER    

evdCore 1.3.6.1.4.1.3052.14.2.12.2.1
OBJECT IDENTIFIER    

evNoData1 1.3.6.1.4.1.3052.14.2.12.3
OBJECT IDENTIFIER    

evNoData2 1.3.6.1.4.1.3052.14.2.12.4
OBJECT IDENTIFIER    

evSched1 1.3.6.1.4.1.3052.14.2.12.5
OBJECT IDENTIFIER    

evSched2 1.3.6.1.4.1.3052.14.2.12.6
OBJECT IDENTIFIER    

evNoSensor 1.3.6.1.4.1.3052.14.2.12.9
OBJECT IDENTIFIER    

fuelSensor 1.3.6.1.4.1.3052.14.2.12.11
OBJECT IDENTIFIER    

acPowerMonitor 1.3.6.1.4.1.3052.14.2.12.12
OBJECT IDENTIFIER    

evReset 1.3.6.1.4.1.3052.14.2.12.16
OBJECT IDENTIFIER    

action 1.3.6.1.4.1.3052.14.2.14
OBJECT IDENTIFIER    

actionSched 1.3.6.1.4.1.3052.14.2.14.3
OBJECT IDENTIFIER    

actionAsentria 1.3.6.1.4.1.3052.14.2.14.4
OBJECT IDENTIFIER    

sys 1.3.6.1.4.1.3052.14.2.16
OBJECT IDENTIFIER    

sysTime 1.3.6.1.4.1.3052.14.2.16.1
OBJECT IDENTIFIER    

sysTimeNet 1.3.6.1.4.1.3052.14.2.16.1.4
OBJECT IDENTIFIER    

sysPT 1.3.6.1.4.1.3052.14.2.16.2
OBJECT IDENTIFIER    

sysTimeStamp 1.3.6.1.4.1.3052.14.2.16.8
OBJECT IDENTIFIER    

sysLog 1.3.6.1.4.1.3052.14.2.16.9
OBJECT IDENTIFIER    

sysCRDB 1.3.6.1.4.1.3052.14.2.16.10
OBJECT IDENTIFIER    

sysLoc 1.3.6.1.4.1.3052.14.2.16.14
OBJECT IDENTIFIER    

sysAssetMgmt 1.3.6.1.4.1.3052.14.2.16.15
OBJECT IDENTIFIER    

sysFileTransfer 1.3.6.1.4.1.3052.14.2.16.17
OBJECT IDENTIFIER    

sysUpdate 1.3.6.1.4.1.3052.14.2.16.18
OBJECT IDENTIFIER    

auditLog 1.3.6.1.4.1.3052.14.2.17
OBJECT IDENTIFIER    

scripting 1.3.6.1.4.1.3052.14.2.18
OBJECT IDENTIFIER    

productIds 1.3.6.1.4.1.3052.14.3
OBJECT IDENTIFIER    

esPointTable 1.3.6.1.4.1.3052.14.1.1.1
This table organizes 4 basic attributes of points. A point is a particular sensor on an EventSensor (e.g., temperature, humidity, contact closure 2, output 5, etc.). The 4 point attributes are its name, whether it's in its event state, the point's value as a number and its value as a string. Points are referenced by a point index. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPoint

esPointEntry 1.3.6.1.4.1.3052.14.1.1.1.1
Entry for EventSensor point table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPoint  

esIndexES 1.3.6.1.4.1.3052.14.1.1.1.1.1
The part of the point index that refers to an EventSensor. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

esIndexPC 1.3.6.1.4.1.3052.14.1.1.1.1.2
The part of the point index that refers to point class. The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point). The values for this object are: 1=temperature sensor 2=contact closure 3=humidity sensor 4=noise sensor 5=analog input 6=output (relay output or power output)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

esIndexPoint 1.3.6.1.4.1.3052.14.1.1.1.1.3
The part of the point index that delineates which sensor on the EventSensor. So this combined with esIndexPC (Point Class or type) and esIndexES (which EventSensor) uniquely defines each point (sensor or output) attached to a unit. For example, if esIndexES is 3, esIndexPC is 1 and esIndexPoint is 4 then this is the Fourth Temperature Sensor on EventSensor number 3.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

esPointName 1.3.6.1.4.1.3052.14.1.1.1.1.4
The name of the point on an EventSensor. For example, 'AC temp' (in the case of the temperature sensor on an EventSensor). There can be multiple points of the same point class on an EventSensor (e.g., 8 contact closures) and multiple sensor classes on an EventSensor (e.g., temperature, contact closure, humidity). If the point referenced by a given point index is solitary (e.g., temperature sensor, because there can be only one on an EventSensor), then this object reads as ''. Setting this object for solitary point indices sets the EventSensor name only. On the other hand, if a given point is among other points of the same point class on an EventSensor, then this object reads as ''. Setting this object for these NON- solitary point indices sets the sensor name only - not the EventSensor name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

esPointInEventState 1.3.6.1.4.1.3052.14.1.1.1.1.5
A number referring to the event state of a point on an EventSensor. This number can have different meanings depending on the point class. If the point class is temperature, humidity, or analog input, then the values of this object are: 1=very low 2=low 3=normal 4=high 5=very high For contact closures the values of this object are: 1=point in event state 2=point in normal state For outputs the values of this object is the numeric code for the logical state of the output: 1 or 2. The logical state of the output is either active/inactive for relay outputs or on/off for power outputs. The logical state of the output has different nomenclature depending on the type of the output (relay output or power output): 1=active (for relay output) or on (for power output) 2=inactive (for relay output) or off (for power output) This is not necessarily representative of physical state of the output. Physical state is energized/de-energized, for both relay and power outputs. For relay outputs, the active logical state corresponds to either the energized physical state or the de-energized physical state depending on how the relay output is configured. For power outputs, the on logical state always corresponds to the energized physical state. For any point class and any point, if the event state is undefined, then the value of this object is 0. For any point class except output, this object is read-only. For outputs, setting this object to 1 puts the output into its active logical state. Setting this object to 2 puts the output into its inactive logical state. Setting this object to any value greater than 2 puts the output into its active logical state for that many seconds (up to 3600), after which time it puts the output into its inactive logical state.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

esPointValueInt 1.3.6.1.4.1.3052.14.1.1.1.1.6
A read-only number referring to the value of a point on an EventSensor. If the point class is temperature, then this object is the temperature in its configured scale (default is Fahrenheit). If the point class is contact closure, then this object is either 0 (open) or 1 (closed). If the point class is humidity, then this object is the percent relative humidity. If the point class is analog input, then this object is the signed input value in tenths of the configured units. If the point class is an output, then this object is the numeric code for the physical state of the output. 0=de-energized 1=energized This object cannot be used to control the output, i.e, change its logical or physical state (instead use the esPointInEventState object).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

esPointValueStr 1.3.6.1.4.1.3052.14.1.1.1.1.7
A string referring to the value of a point on an EventSensor. For contact closures this object is either 'Open' or 'Closed'. For outputs this object is a concatenation of the logical state and physical state, separated by '/'. For a relay output this object can be one of the following 4 possible values: Active/Energized Inactive/Energized Active/De-energized Inactve/De-energized For a power output this object can be one of the following 2 possible values: On/Energized Off/De-energized For temperature and humidity point classes, this object is the string representation of the esPointValueInt object. For temperature, 'C' or 'F' is including in the string to indicate scale. For analog inputs, this object is the string representation of the plus/minus input in the configured units appended with the unit name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esPointTimeLastChange 1.3.6.1.4.1.3052.14.1.1.1.1.8
The time of the last time an event was triggerred for a point on an EventSensor in MM/DD/YY HH:MM:SS format. For contact closures, the possible events are Active and Inactive. For temperature, humidity, and analog inputs, the possible events are Normal, High, Very High, Low, and Very Low. For outputs, this object is a null string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esPointTimetickLastChange 1.3.6.1.4.1.3052.14.1.1.1.1.9
The time of the last time an event was triggerred for a point on an EventSensor in 100ths of seconds since reset. For contact closures, the possible events are Active and Inactive. For temperature, humidity, and analog inputs, the possible events are Normal, High, Very High, Low, and Very Low. For outputs, this object is 0.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

deStatusTable 1.3.6.1.4.1.3052.14.1.2.1
Data Event Status Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DEStatus

deStatusEntry 1.3.6.1.4.1.3052.14.1.2.1.1
EventSensor status entry
Status: current Access: not-accessible
OBJECT-TYPE    
  DEStatus  

deStatusIndex 1.3.6.1.4.1.3052.14.1.2.1.1.1
Index for Data Events
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

deStatusName 1.3.6.1.4.1.3052.14.1.2.1.1.2
Data Event name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

deStatusCounter 1.3.6.1.4.1.3052.14.1.2.1.1.3
Number of times a data record has matched this event's equation. Range: 1-999999999
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

deStatusThreshold 1.3.6.1.4.1.3052.14.1.2.1.1.4
Number of times the equation is matched before an event is triggered. Range: 1-999999999
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

modemStatus 1.3.6.1.4.1.3052.14.1.3
status of modem (idle, dialing, connected, etc.)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

modemCLIDLogTable 1.3.6.1.4.1.3052.14.1.4
Table of numbers of recent dialing parties
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModemCLIDLogConfig

modemCLIDLogEntry 1.3.6.1.4.1.3052.14.1.4.1
Entry for table of CLID log entries
Status: current Access: not-accessible
OBJECT-TYPE    
  ModemCLIDLogConfig  

modemCLIDLogIndex 1.3.6.1.4.1.3052.14.1.4.1.1
Index for table of CLID log entries
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

modemCLIDLogNumber 1.3.6.1.4.1.3052.14.1.4.1.2
recently logged number of dialing party
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pdConfig 1.3.6.1.4.1.3052.14.1.5.1
Power Distribution output configuration
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdMainCurrentInEventState 1.3.6.1.4.1.3052.14.1.5.2.1.2
Power Distribution main current event state
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdMainCurrentValue 1.3.6.1.4.1.3052.14.1.5.2.1.3
Power Distribution main current value in mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdMainCurrentValueStr 1.3.6.1.4.1.3052.14.1.5.2.1.4
Power Distribution main current value formatted as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdMainCurrentDeadband 1.3.6.1.4.1.3052.14.1.5.2.1.10
Power Distribution main current sensor deadband in mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainCurrentVHighCurrent 1.3.6.1.4.1.3052.14.1.5.2.1.11
Power Distribution main current sensor very high threshold in mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainCurrentHighCurrent 1.3.6.1.4.1.3052.14.1.5.2.1.12
Power Distribution main current sensor high threshold in mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainCurrentLowCurrent 1.3.6.1.4.1.3052.14.1.5.2.1.13
Power Distribution main current sensor low threshold in mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainCurrentVLowCurrent 1.3.6.1.4.1.3052.14.1.5.2.1.14
Power Distribution main current sensor very low threshold in mA
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainVoltageInEventState 1.3.6.1.4.1.3052.14.1.5.2.2.2
Power Distribution main voltage event state
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdMainVoltageValue 1.3.6.1.4.1.3052.14.1.5.2.2.3
Power Distribution main voltage value in mV
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdMainVoltageValueStr 1.3.6.1.4.1.3052.14.1.5.2.2.4
Power Distribution main voltage value formatted as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdMainVoltageDeadband 1.3.6.1.4.1.3052.14.1.5.2.2.10
Power Distribution main voltage sensor deadband in mV
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainVoltageVHighVoltage 1.3.6.1.4.1.3052.14.1.5.2.2.11
Power Distribution main voltage sensor very high threshold in mV
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainVoltageHighVoltage 1.3.6.1.4.1.3052.14.1.5.2.2.12
Power Distribution main voltage sensor high threshold in mV
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainVoltageLowVoltage 1.3.6.1.4.1.3052.14.1.5.2.2.13
Power Distribution main voltage sensor low threshold in mV
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainVoltageVLowVoltage 1.3.6.1.4.1.3052.14.1.5.2.2.14
Power Distribution main voltage sensor very low threshold in mV
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdMainPowerValue 1.3.6.1.4.1.3052.14.1.5.2.3.3
Power Distribution main power value in Watts
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdMainPowerValueStr 1.3.6.1.4.1.3052.14.1.5.2.3.4
Power Distribution main power value formatted as a string
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdOutputCurrentTable 1.3.6.1.4.1.3052.14.1.5.3.1
Table of power output current values
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PowerDistribOutputCurrent

pdOutputCurrentEntry 1.3.6.1.4.1.3052.14.1.5.3.1.1
Entry for table of output current values
Status: current Access: not-accessible
OBJECT-TYPE    
  PowerDistribOutputCurrent  

pdOutputCurrentIndex 1.3.6.1.4.1.3052.14.1.5.3.1.1.1
Index for table of power output current values
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..13  

pdOutputCurrentInEventState 1.3.6.1.4.1.3052.14.1.5.3.1.1.2
The event state of this power distribution output current (Very Low, Low, Normal, High, Very High)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdOutputCurrentValue 1.3.6.1.4.1.3052.14.1.5.3.1.1.3
Output current value in mA
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdOutputCurrentValueStr 1.3.6.1.4.1.3052.14.1.5.3.1.1.4
Output current value formatted as a fixed-point string in Amps.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdOutputCurrentDeadband 1.3.6.1.4.1.3052.14.1.5.3.1.1.10
Deadband for this power output current sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdOutputCurrentVHighCurrent 1.3.6.1.4.1.3052.14.1.5.3.1.1.11
Very high threshold for this power output current sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdOutputCurrentHighCurrent 1.3.6.1.4.1.3052.14.1.5.3.1.1.12
High threshold for this power output current sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdOutputCurrentVLowCurrent 1.3.6.1.4.1.3052.14.1.5.3.1.1.13
Very low threshold for this power output current sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdOutputCurrentLowCurrent 1.3.6.1.4.1.3052.14.1.5.3.1.1.14
Low threshold for this power output current sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pdOutputFuseTable 1.3.6.1.4.1.3052.14.1.5.3.4
Table of output fuse values
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PowerDistribOutputFuse

pdOutputFuseEntry 1.3.6.1.4.1.3052.14.1.5.3.4.1
Entry for table of output fuse values
Status: current Access: not-accessible
OBJECT-TYPE    
  PowerDistribOutputFuse  

pdOutputFuseIndex 1.3.6.1.4.1.3052.14.1.5.3.4.1.1
Index for table of output fuse values
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..13  

pdOutputFuseInEventState 1.3.6.1.4.1.3052.14.1.5.3.4.1.2
A number referring to the event state of a power distribution output fuse. 14=fuse blown 15=fuse ok
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdOutputFuseValueStr 1.3.6.1.4.1.3052.14.1.5.3.4.1.4
Output fuse value formatted as a string. E.g., 'BLOWN' or 'OK'
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnTable 1.3.6.1.4.1.3052.14.1.5.4.1
Table of power distribution objects arranged according to next-generation methodology (i.e., using multiple PowerBoss power distributors in addition to the on-board power distributor).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PowerDistribNextGen

pdnEntry 1.3.6.1.4.1.3052.14.1.5.4.1.1
Entry for table of power distribution objects arranged according to next-generation methodology (i.e., using multiple PowerBoss power distributors in addition to the on-board power distributor).
Status: current Access: not-accessible
OBJECT-TYPE    
  PowerDistribNextGen  

pdnIndexPD 1.3.6.1.4.1.3052.14.1.5.4.1.1.1
Index for table of power distribution objects, specifically the index that refers to which power distributor. A value of 200 means the internal power distributor. A value from 1 to 16 refers to a PowerBoss external power distributor, and is the same value as esIndexES, which refers to the PowerBoss as an EventSensor in the eventSensorStatus object table. In other words, pdnIndexPD is the same as esIndexES: esIndexES is used to refer to the PowerBoss as an eventsensor (i.e., control outputs), while pdnIndexPD is used to refer to the PowerBoss when used for power distribution monitoring (i.e., to alarm on output current/voltage/fuse status).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

pdnIndexOutput 1.3.6.1.4.1.3052.14.1.5.4.1.1.2
Index for table of power distribution objects, specifically the index that refers to which output on the power distributor specified by pdnIndexPD. For objects where the output is irrelevant, this index should be 1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..12  

pdnConfig 1.3.6.1.4.1.3052.14.1.5.4.1.1.3
The number of outputs on the power distributor specified by pdnIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnMainCurrentInEventState 1.3.6.1.4.1.3052.14.1.5.4.1.1.4
The event state of the current (i.e. Amps) event of the power distributor specified by pdnIndexPD. pdnIndexOutput should be 1 for this object. Possible values for this object are: 'Very Low', 'Low', 'Normal', 'High', 'Very High'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnMainCurrentValue 1.3.6.1.4.1.3052.14.1.5.4.1.1.5
The current drawn, in mA, for the power distributor specified by pdnIndexPD. If pdnIndexPD is 200 then this is the internal power distributor and refers to the current drawn by the S571 (which is comprised of the internal power distributor and ancillary internal equipment) and all equipment powered by the S571's internal power outputs. If pdnIndexPD is 1-16 then this is an external power distributor (PowerBoss) and refers to the current drawn by that PowerBoss and all equipment powered by that PowerBoss. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainCurrentValueStr 1.3.6.1.4.1.3052.14.1.5.4.1.1.6
Essentially pdnMainCurrentValue formatted as a string in units of Amps, with 3 decimal places. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnMainCurrentDeadband 1.3.6.1.4.1.3052.14.1.5.4.1.1.7
The deadband, in mA, for the main current sensor for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainCurrentVHighCurrent 1.3.6.1.4.1.3052.14.1.5.4.1.1.8
The current, in mA, for the main current sensor's Very High event threshold, for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainCurrentHighCurrent 1.3.6.1.4.1.3052.14.1.5.4.1.1.9
The current, in mA, for the main current sensor's High event threshold, for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainCurrentLowCurrent 1.3.6.1.4.1.3052.14.1.5.4.1.1.10
The current, in mA, for the main current sensor's Low event threshold, for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainCurrentVLowCurrent 1.3.6.1.4.1.3052.14.1.5.4.1.1.11
The current, in mA, for the main current sensor's Very Low event threshold, for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainVoltageInEventState 1.3.6.1.4.1.3052.14.1.5.4.1.1.12
The event state of the voltage event of the power distributor specified by pdnIndexPD. pdnIndexOutput should be 1 for this object. Possible values for this object are: 'Very Low', 'Low', 'Normal', 'High', 'Very High'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnMainVoltageValue 1.3.6.1.4.1.3052.14.1.5.4.1.1.13
The voltage, in mV, at the power distributor specified by pdnIndexPD. If pdnIndexPD is 200 then this is the internal power distributor and refers to the voltage at the S571 (which is comprised of the internal power distributor and ancillary internal equipment) and all equipment powered by the S571's internal power outputs. If pdnIndexPD is 1-16 then this is an external power distributor (PowerBoss) and refers to the voltage at that PowerBoss and all equipment powered by that PowerBoss. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainVoltageValueStr 1.3.6.1.4.1.3052.14.1.5.4.1.1.14
Essentially pdnMainVoltageValue formatted as a string in units of Volts, with 3 decimal places. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnMainVoltageDeadband 1.3.6.1.4.1.3052.14.1.5.4.1.1.15
The deadband, in mV, for the main voltage sensor for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainVoltageVHighVoltage 1.3.6.1.4.1.3052.14.1.5.4.1.1.16
The voltage, in mA, for the main voltage sensor's Very High event threshold, for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainVoltageHighVoltage 1.3.6.1.4.1.3052.14.1.5.4.1.1.17
The voltage, in mV, for the main voltage sensor's High event threshold, for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainVoltageLowVoltage 1.3.6.1.4.1.3052.14.1.5.4.1.1.18
The voltage, in mV, for the main voltage sensor's Low event threshold, for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainVoltageVLowVoltage 1.3.6.1.4.1.3052.14.1.5.4.1.1.19
The voltage, in mV, for the main voltage sensor's Very Low event threshold, for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainPowerValue 1.3.6.1.4.1.3052.14.1.5.4.1.1.20
The power, in Watts, for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnMainPowerValueStr 1.3.6.1.4.1.3052.14.1.5.4.1.1.21
The power, in Watts, for the power distributor specified by pdIndexPD, formatted as a string with the unit name 'Watts'. pdnIndexOutput should be 1 for this object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnOutputCurrentInEventState 1.3.6.1.4.1.3052.14.1.5.4.1.1.22
The event state of the current (i.e. Amps) event of the power distributor output specified by pdnIndexPD and pdnIndexOutput. E.g., for pdnIndexPD=200 and pdnIndexOutput=2, this refers to power output #2 of the internal power distributor. Possible values for this object are: 'Very Low', 'Low', 'Normal', 'High', 'Very High'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnOutputCurrentValue 1.3.6.1.4.1.3052.14.1.5.4.1.1.23
The current drawn, in mA, for the power distributor output specified by pdnIndexPD and pdIndexOutput. If pdnIndexPD is 200 then this is the internal power distributor and refers to the current drawn by a specific power output on the S571. If pdIndexPD is 3 then this is an external power distributor (PowerBoss) identified as 'power distributor 3' and refers to the current drawn by a specific power output on that PowerBoss. The specific power output is specified by pdIndexOutput.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnOutputCurrentValueStr 1.3.6.1.4.1.3052.14.1.5.4.1.1.24
Essentially pdnOutputCurrentValue formatted as a string in units of Amps, with 3 decimal places.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnOutputCurrentDeadband 1.3.6.1.4.1.3052.14.1.5.4.1.1.25
The deadband, in mA, for the main current sensor for the power distributor specified by pdIndexPD. The power output is specified by pdnIndexOutput.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnOutputCurrentVHighCurrent 1.3.6.1.4.1.3052.14.1.5.4.1.1.26
The current, in mA, for a specific power output's current sensor Very High event threshold, for the power distributor specified by pdIndexPD. The power output is specified by pdnIndexOutput.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnOutputCurrentHighCurrent 1.3.6.1.4.1.3052.14.1.5.4.1.1.27
The current, in mA, for a specific power output's current sensor High event threshold, for the power distributor specified by pdIndexPD. The power output is specified by pdnIndexOutput for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnOutputCurrentLowCurrent 1.3.6.1.4.1.3052.14.1.5.4.1.1.28
The current, in mA, for a specific power output's current sensor Low event threshold, for the power distributor specified by pdIndexPD. The power output is specified by pdnIndexOutput for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnOutputCurrentVLowCurrent 1.3.6.1.4.1.3052.14.1.5.4.1.1.29
The current, in mA, for a specific power output's current sensor Very Low event threshold, for the power distributor specified by pdIndexPD. The power output is specified by pdnIndexOutput for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnOutputFuseInEventState 1.3.6.1.4.1.3052.14.1.5.4.1.1.30
The event state of the fuse event of the power distributor output specified by pdnIndexPD and pdnIndexOutput. E.g., for pdnIndexPD=14 and pdnIndexOutput=2, this refers to power output #2 of the PowerBoss external power distributor, identified as 'power distributor 14'. Possible values for this object are: 'Very Low', 'Low', 'Normal', 'High', 'Very High'. This object exists only for power distributors with fuse monitoring support.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnOutputFuseValueStr 1.3.6.1.4.1.3052.14.1.5.4.1.1.31
The state of the fuse of the power distributor output specified by pdnIndexPD and pdnIndexOutput. Possible values for this object are: 'BLOWN' and 'OK'. This object exists only for power distributors with fuse monitoring support.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnMainCombinedStatus 1.3.6.1.4.1.3052.14.1.5.4.1.1.32
Combined status string intended to be parsed by NMS: format: voltageColorCode`voltageEventState`voltageValue`mainCurrentColorCode`mainCurrentEventState`mainCurrentValue`deviceCurrentValue`mainPowerValue
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnOutputCombinedStatusBlock1 1.3.6.1.4.1.3052.14.1.5.4.1.1.33
Combined status string intended to be parsed by NMS: format: numInBlock~outputCurrentColorCode1`outputCurrentEventState1`outputCurrentValue1`fuseColorCode1`fuseValue1~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnOutputCombinedStatusBlock2 1.3.6.1.4.1.3052.14.1.5.4.1.1.34
Combined status string intended to be parsed by NMS: format: numInBlock~outputCurrentColorCode1`outputCurrentEventState1`outputCurrentValue1`fuseColorCode1`fuseValue1~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdnDeviceCurrentValue 1.3.6.1.4.1.3052.14.1.5.4.1.1.35
Current drawn by device in mA. For the internal power distributor device, this is the current drawn by the SiteBoss 571. For an external power distributor device (PowerBoss), this is the current drawn by the PowerBoss. This object exists only for power distributors with device current monitoring support.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pdnDeviceCurrentValueStr 1.3.6.1.4.1.3052.14.1.5.4.1.1.36
Current drawn by device as a string with units (Amps). For the internal power distributor device, this is the current drawn by the SiteBoss 571. For an external power distributor device (PowerBoss), this is the current drawn by the PowerBoss. This object exists only for power distributors with device current monitoring support.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdSystemCurrent 1.3.6.1.4.1.3052.14.1.5.5.1
Total current drawn by all power distributors in system; that is, the sum of all pdnMainCurrentValue objects for all connected power distributors: internal and external.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

pdSystemPower 1.3.6.1.4.1.3052.14.1.5.5.2
Total power used by all power distributors in system; that is, the sum of all pdnMainPowerValue objects for all connected power distributors: internal and external.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusTable 1.3.6.1.4.1.3052.14.1.6.1
Fuel sensor status table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FSStatus

fsStatusEntry 1.3.6.1.4.1.3052.14.1.6.1.1
Fuel sensor status table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  FSStatus  

fsStatusIndex 1.3.6.1.4.1.3052.14.1.6.1.1.1
Index for fuel sensors
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

fsStatusName 1.3.6.1.4.1.3052.14.1.6.1.1.2
Fuel sensor name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusDeviceState 1.3.6.1.4.1.3052.14.1.6.1.1.3
Fuel sensor device state
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusVolumeValueString 1.3.6.1.4.1.3052.14.1.6.1.1.4
Fuel volume. Range is -2,147,483,648 to 2,147,483,647. This value reads -999 when the fuel sensor is disconnected
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusVolumePercentLevel 1.3.6.1.4.1.3052.14.1.6.1.1.7
Height of the fluid in the tank expressed as a percentage of the tank height, in hundredths of a percent.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusVolumeInEventState 1.3.6.1.4.1.3052.14.1.6.1.1.8
Current event status of the fuel sensor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fsStatusCombined 1.3.6.1.4.1.3052.14.1.6.1.1.9
Combined status string intended to be parsed by NMS: deviceState`deviceStateColorCode`percentRounded`valueAsFloat`volumeEventState`volumeEventStateColorCode`capacity`units`name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsStatus 1.3.6.1.4.1.3052.14.1.7.1
Wireless modem status
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsSignal 1.3.6.1.4.1.3052.14.1.7.2
Wireless modem Signal strength
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsRSSI 1.3.6.1.4.1.3052.14.1.7.3
Wireless modem Signal strength (RSSI)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsBER 1.3.6.1.4.1.3052.14.1.7.4
Wireless modem Bit Error Rate
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsUpdated 1.3.6.1.4.1.3052.14.1.7.5
Wireless modem info last update time
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsRegistration 1.3.6.1.4.1.3052.14.1.7.6
Wireless modem registration status
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsLAC 1.3.6.1.4.1.3052.14.1.7.7
Wireless modem Location Area Code
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsCellID 1.3.6.1.4.1.3052.14.1.7.8
Wireless modem Cell ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsIMSI 1.3.6.1.4.1.3052.14.1.7.9
Wireless modem Internation Mobile Subscriber Identity number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsPhnum 1.3.6.1.4.1.3052.14.1.7.10
Wireless modem phone number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsLocalIP 1.3.6.1.4.1.3052.14.1.7.11
Local IP address of modem on wireless network
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsMgfID 1.3.6.1.4.1.3052.14.1.7.12
Wireless modem manufacturer ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsModelID 1.3.6.1.4.1.3052.14.1.7.13
Wireless modem model ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsIMEI 1.3.6.1.4.1.3052.14.1.7.14
Wireless modem International Mobile Equipment Identity number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsRevID 1.3.6.1.4.1.3052.14.1.7.15
Wireless modem revision ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsNetName 1.3.6.1.4.1.3052.14.1.7.16
Wireless modem network name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsGPRSStatus 1.3.6.1.4.1.3052.14.1.7.17
Wireless modem (E)GPRS status
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsBand 1.3.6.1.4.1.3052.14.1.7.18
Wireless modem band
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsChannel 1.3.6.1.4.1.3052.14.1.7.19
Wireless modem channel
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsCountryCode 1.3.6.1.4.1.3052.14.1.7.20
Wireless modem country code
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsNetCode 1.3.6.1.4.1.3052.14.1.7.21
Wireless modem network code
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsPLMNColor 1.3.6.1.4.1.3052.14.1.7.22
Wireless modem PLMN color
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsBScolor 1.3.6.1.4.1.3052.14.1.7.23
Wireless modem BS color
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsMpRACH 1.3.6.1.4.1.3052.14.1.7.24
Wireless modem max power RACH
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsMinRxLevel 1.3.6.1.4.1.3052.14.1.7.25
Wireless modem minimum receive level
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsBaseCoeff 1.3.6.1.4.1.3052.14.1.7.26
Wireless modem base coefficient
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsSIMStatus 1.3.6.1.4.1.3052.14.1.7.27
WWireless modem SIM status
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsICCID 1.3.6.1.4.1.3052.14.1.7.28
Wireless modem SIM ICCID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

wmsModemType 1.3.6.1.4.1.3052.14.1.7.29
Wireless modem type
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmStatusTable 1.3.6.1.4.1.3052.14.1.8.1
AC power monitor status table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ACPMStatus

acpmStatusEntry 1.3.6.1.4.1.3052.14.1.8.1.1
AC power monitor status table entry
Status: current Access: not-accessible
OBJECT-TYPE    
  ACPMStatus  

acpmsIndex 1.3.6.1.4.1.3052.14.1.8.1.1.1
Index for AC power monitors
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acpmsName 1.3.6.1.4.1.3052.14.1.8.1.1.2
Name for the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.3
Average voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1). This could be either the average of the phase voltages, or the sum of the phase voltages, depending on device configuration.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageMinStr 1.3.6.1.4.1.3052.14.1.8.1.1.4
Minimum average voltage value since last reset, in volts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageMaxStr 1.3.6.1.4.1.3052.14.1.8.1.1.5
Maximum average voltage value since last reset, in volts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageAvgStr 1.3.6.1.4.1.3052.14.1.8.1.1.6
Average average voltage value since last reset, in volts. This is the unit's average of its measurements of the average voltage reported by the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgVoltageInEventState 1.3.6.1.4.1.3052.14.1.8.1.1.7
Event state of this AC power monitor voltage (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsVoltagePhaseAValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.8
Phase A voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsVoltagePhaseBValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.9
Phase B voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsVoltagePhaseCValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.10
Phase C voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.11
Average current, in amps. This is calculated using the formula (register * CT ratio * 0.001). This could be either the average of the phase currents, or the sum of the phase currents, depending on device configuration.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentMinStr 1.3.6.1.4.1.3052.14.1.8.1.1.12
Minimum average current value since last reset, in amps.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentMaxStr 1.3.6.1.4.1.3052.14.1.8.1.1.13
Maximum average current value since last reset, in amps.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentAvgStr 1.3.6.1.4.1.3052.14.1.8.1.1.14
Average average current value since last reset, in amps. This is the unit's average of its measurements of the average current reported by the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgCurrentInEventState 1.3.6.1.4.1.3052.14.1.8.1.1.15
Event state of this AC power monitor current (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsCurrentPhaseAValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.16
Phase A current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsCurrentPhaseBValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.17
Phase B current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsCurrentPhaseCValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.18
Phase C current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.19
Frequency, in hertz. On the YD2010, this is calculated using the formula (register * 0.00106813). On the WattsOn, this is calculated using the formula (register * 0.1).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqMinStr 1.3.6.1.4.1.3052.14.1.8.1.1.20
Minimum frequency value since last reset, in hertz.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqMaxStr 1.3.6.1.4.1.3052.14.1.8.1.1.21
Maximum frequency value since last reset, in hertz.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqAvgStr 1.3.6.1.4.1.3052.14.1.8.1.1.22
Average frequency value since last reset, in hertz. This is the unit's average of its measurements of the average frequency reported by the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAvgFreqInEventState 1.3.6.1.4.1.3052.14.1.8.1.1.23
Event state of this AC power monitor frequency (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.24
Total real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn models, this is calculated using the formula (register * PT * CT).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPMinStr 1.3.6.1.4.1.3052.14.1.8.1.1.25
Minimum total real power value since last reset, in watts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPMaxStr 1.3.6.1.4.1.3052.14.1.8.1.1.26
Maximum total real power value since last reset, in watts.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPAvgStr 1.3.6.1.4.1.3052.14.1.8.1.1.27
Average total real power value since last reset, in watts. This is the unit's average of its measurements of the average total real power reported by the AC power monitor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRPInEventState 1.3.6.1.4.1.3052.14.1.8.1.1.28
Event state of this AC power monitor total real power (Low, Normal, High, etc.).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRPPhaseAValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.29
Phase A real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn, this is calculated using the formula (register * PT * CT).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRPPhaseBValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.30
Phase B real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn, this is calculated using the formula (register * PT * CT).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRPPhaseCValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.31
Phase C real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range taken from register 0x30A. On the WattsOn, this is calculated using the formula (register * PT * CT).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsCombined 1.3.6.1.4.1.3052.14.1.8.1.1.32
Combined status string intended to be parsed by NMS: name`deviceState`deviceStateColorCode`voltage`current`frequency`power~voltageEventState`voltageColorCode`currentEventState`currentColorCode`frequencyEventState`freuencyColorCode`powerEventState`powerColorCode
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.33
Total power factor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFMinStr 1.3.6.1.4.1.3052.14.1.8.1.1.34
Total power factor minimum value since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFMaxStr 1.3.6.1.4.1.3052.14.1.8.1.1.35
Total power factor maximum value since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFAvgStr 1.3.6.1.4.1.3052.14.1.8.1.1.36
Total power factor average value since last reset.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTPFInEventState 1.3.6.1.4.1.3052.14.1.8.1.1.37
Total power factor event state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsPFPhaseAValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.38
Phase A power factor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsPFPhaseBValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.39
Phase B power factor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsPFPhaseCValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.40
Phase C power factor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRcPValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.41
Total reactive power, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRcPMinStr 1.3.6.1.4.1.3052.14.1.8.1.1.42
Total reactive power minimum value since last reset, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRcPMaxStr 1.3.6.1.4.1.3052.14.1.8.1.1.43
Total reactive power maximum value since last reset, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTRcPAvgStr 1.3.6.1.4.1.3052.14.1.8.1.1.44
Total reactive power average value since last reset, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRcPPhaseAValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.45
Phase A reactive power, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRcPPhaseBValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.46
Phase B reactive power, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsRcPPhaseCValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.47
Phase C reactive power, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTAPValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.48
Total apparent power, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTAPMinStr 1.3.6.1.4.1.3052.14.1.8.1.1.49
Total apparent power minimum value since last reset, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTAPMaxStr 1.3.6.1.4.1.3052.14.1.8.1.1.50
Total apparent power maximum value since last reset, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTAPAvgStr 1.3.6.1.4.1.3052.14.1.8.1.1.51
Total apparent power average value since last reset, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAPPhaseAValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.52
Phase A apparent power, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAPPhaseBValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.53
Phase B apparent power, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsAPPhaseCValueStr 1.3.6.1.4.1.3052.14.1.8.1.1.54
Phase C apparent power, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acpmsTotalEnergyWh 1.3.6.1.4.1.3052.14.1.8.1.1.55
Total energy, in Wh.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acpmsTotalEnergyVAR 1.3.6.1.4.1.3052.14.1.8.1.1.56
Total reactive energy, in VAR.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acpmsTotalEnergyVA 1.3.6.1.4.1.3052.14.1.8.1.1.57
Total apparent energy, in VA.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

aisgsPower 1.3.6.1.4.1.3052.14.1.9.1
AISG power state
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsBaseStationID 1.3.6.1.4.1.3052.14.1.9.2
AISG base station ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDTable 1.3.6.1.4.1.3052.14.1.9.3
The table of what AISG ALDs (Antenna Line Devices) are attached to the unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AISGALD

aisgsALDEntry 1.3.6.1.4.1.3052.14.1.9.3.1
Table entry for AISG ALD table
Status: current Access: not-accessible
OBJECT-TYPE    
  AISGALD  

aisgsALDIndex 1.3.6.1.4.1.3052.14.1.9.3.1.1
This number refers to an ALD; it is the ALD # as shown in the web UI and CLI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..18  

aisgsALDSectorID 1.3.6.1.4.1.3052.14.1.9.3.1.2
The sector ID of this ALD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDType 1.3.6.1.4.1.3052.14.1.9.3.1.3
The type of ALD (SR or MR).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDDescription 1.3.6.1.4.1.3052.14.1.9.3.1.4
User-defined description for this ALD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDStatus 1.3.6.1.4.1.3052.14.1.9.3.1.5
Status of this ALD (i.e., OFF, OK, UNRSP, ALARM).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDID 1.3.6.1.4.1.3052.14.1.9.3.1.6
The ID/serial number of this ALD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDTilt 1.3.6.1.4.1.3052.14.1.9.3.1.7
The current tilt value of this ALD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDHwVersion 1.3.6.1.4.1.3052.14.1.9.3.1.8
The hardware version of this ALD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDSwVersion 1.3.6.1.4.1.3052.14.1.9.3.1.9
The software version of this ALD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDModel 1.3.6.1.4.1.3052.14.1.9.3.1.10
The model number of this ALD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDAntennaModel 1.3.6.1.4.1.3052.14.1.9.3.1.11
The model number of the antenna associated with this ALD. Note that not all ALDs have this.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDMinTilt 1.3.6.1.4.1.3052.14.1.9.3.1.12
The minimum tilt value of this ALD, as determined by the ALD's loaded configuration file. A nonsensical value here indicates that the ALD is not configured.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDMaxTilt 1.3.6.1.4.1.3052.14.1.9.3.1.13
The maximum tilt value of this ALD, as determined by the ALD's loaded configuration file. A nonsensical value here indicates that the ALD is not configured.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsALDAISGVersion 1.3.6.1.4.1.3052.14.1.9.3.1.14
The AISG version of this ALD. E.g., 1.1, 2.0.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsFileTable 1.3.6.1.4.1.3052.14.1.9.4
The table of what AISG files are currently loaded on the unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AISGFile

aisgsFileEntry 1.3.6.1.4.1.3052.14.1.9.4.1
Table entry for AISG File table
Status: current Access: not-accessible
OBJECT-TYPE    
  AISGFile  

aisgsFileIndex 1.3.6.1.4.1.3052.14.1.9.4.1.1
Index for AISG File table. This defines the local store (local to the unit) of files residing on the unit that are available to be loaded onto ALDs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..10  

aisgsFileName 1.3.6.1.4.1.3052.14.1.9.4.1.2
Name of AISG file (specified by user).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsFileType 1.3.6.1.4.1.3052.14.1.9.4.1.3
Type of AISG file (e.g., SOFTWARE or CONFIG)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsFileVersion 1.3.6.1.4.1.3052.14.1.9.4.1.4
Version of AISG file as reported by the ALD running this software. This is for SOFTWARE files, so that the unit can know when (during auto config) it does not need to load software onto an ALD (i.e., if the ALD already has this software version loaded).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsAutoTable 1.3.6.1.4.1.3052.14.1.9.5
The table of AISG automatic configuration slots on the unit. These slots describe what the unit should do automatically (load software, load config, calibrate, tilt) upon finding the ALD during a scan, on the specific basis of any ALD matching the vendor and ALD model defined in a row of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AISGAuto

aisgsAutoEntry 1.3.6.1.4.1.3052.14.1.9.5.1
Table entry for AISG Auto table
Status: current Access: not-accessible
OBJECT-TYPE    
  AISGAuto  

aisgsAutoIndex 1.3.6.1.4.1.3052.14.1.9.5.1.1
Index for AISG Auto table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..10  

aisgsAutoVendor 1.3.6.1.4.1.3052.14.1.9.5.1.2
The two-letter vendor code for this automatic configuration table row.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsAutoALDModel 1.3.6.1.4.1.3052.14.1.9.5.1.3
The ALD model number this automatic configuration table row.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsAutoSoftware 1.3.6.1.4.1.3052.14.1.9.5.1.4
The software file name of this automatic configuration table row.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsAutoConfig 1.3.6.1.4.1.3052.14.1.9.5.1.5
The configuration file name of this automatic configuration table row.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsAutoTilt 1.3.6.1.4.1.3052.14.1.9.5.1.6
The tilt value for this automatic configuration table row. Any ALD not already auto-configured by the unit will be tilted to this value, if its vendor and model number match the vendor and ALD model number of this table row.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsAAATable 1.3.6.1.4.1.3052.14.1.9.6
The table of AISG antenna-ALD associations slots on the unit. These slots describe what antenna serial number and what sector ID the unit should assign to an ALD that is undergoing automatic configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AISGAAA

aisgsAAAEntry 1.3.6.1.4.1.3052.14.1.9.6.1
Table entry for AISG AAA table
Status: current Access: not-accessible
OBJECT-TYPE    
  AISGAAA  

aisgsAAAIndex 1.3.6.1.4.1.3052.14.1.9.6.1.1
Index for AISG AAA table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..10  

aisgsAAAALDID 1.3.6.1.4.1.3052.14.1.9.6.1.2
The ID/serial number of the ALD for this AAA table row.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsAAAAntennaSN 1.3.6.1.4.1.3052.14.1.9.6.1.3
The user-specified antenna serial number for this AAA table row. An ALD that the unit finds with this ID/serial number will be assigned this antenna serial number. This happens only during auto-configuration of the ALD, which happens only once for an ALD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

aisgsAAASectorID 1.3.6.1.4.1.3052.14.1.9.6.1.4
The user-specified sector ID for this AAA table row. An ALD that the unit finds with this ID/serial number will be assigned this sector ID. This happens only during auto-configuration of the ALD, which happens only once for an ALD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberEventSensors 1.3.6.1.4.1.3052.14.2.1.1
The number of EventSensors recognized by the unit, including the internal EventSensor. Range: 1-17
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esTable 1.3.6.1.4.1.3052.14.2.1.2
The table of what EventSensors are attached to the unit, including the internal EventSensor
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESExist

esEntry 1.3.6.1.4.1.3052.14.2.1.2.1
Table entry for EventSensor table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESExist  

esIndex 1.3.6.1.4.1.3052.14.2.1.2.1.1
This number refers to an EventSensor; it has the same meaning as the esIndexES object (see above), except that this object is used only within the esTable branch. This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndex=2 will now refer to that particular EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

esName 1.3.6.1.4.1.3052.14.2.1.2.1.2
The name of the EventSensor
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esID 1.3.6.1.4.1.3052.14.2.1.2.1.3
The factory-assigned ID of the EventSensor
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberTempSensors 1.3.6.1.4.1.3052.14.2.1.2.1.4
The number of temperature sensors on the EventSensor
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esTempReportingMode 1.3.6.1.4.1.3052.14.2.1.2.1.5
Description of how temperature values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberCCs 1.3.6.1.4.1.3052.14.2.1.2.1.6
The number of contact closures on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esCCReportingMode 1.3.6.1.4.1.3052.14.2.1.2.1.7
Description of how CC values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberHumidSensors 1.3.6.1.4.1.3052.14.2.1.2.1.8
The number of humidity sensors on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esHumidReportingMode 1.3.6.1.4.1.3052.14.2.1.2.1.9
Description of how humidity sensor values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberNoiseSensors 1.3.6.1.4.1.3052.14.2.1.2.1.10
The number of noise sensors on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esNoiseReportingMode 1.3.6.1.4.1.3052.14.2.1.2.1.11
Description of how noise sensor values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberAirflowSensors 1.3.6.1.4.1.3052.14.2.1.2.1.12
The number of airflow sensors on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esAirflowReportingMode 1.3.6.1.4.1.3052.14.2.1.2.1.13
Description of how airflow sensor values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberAnalog 1.3.6.1.4.1.3052.14.2.1.2.1.14
The number of analog inputs on the EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esAnalogReportingMode 1.3.6.1.4.1.3052.14.2.1.2.1.15
Description of how analog input values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNumberOutputs 1.3.6.1.4.1.3052.14.2.1.2.1.16
The number of outputs (relay or power) on the EventSensor
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

esOutputReportingMode 1.3.6.1.4.1.3052.14.2.1.2.1.17
Description of how output values should be interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esTempCombinedStatus 1.3.6.1.4.1.3052.14.2.1.2.1.18
Combined status string intended to be parsed by NMS: name`value`scale`eventState`eventColorCode
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock1 1.3.6.1.4.1.3052.14.2.1.2.1.19
Combined status string intended to be parsed by NMS: numInBlock~name1`value1`eventColorCode1`alias1~name2`value2`eventColorCode2`alias2~...name8`value8`eventColorCode8`alias8
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock2 1.3.6.1.4.1.3052.14.2.1.2.1.20
Combined status string intended to be parsed by NMS: numInBlock~name9`value9`eventColorCode9`alias9~name10`value10`eventColorCode10`alias10~...name16`value16`eventColorCode16`alias16
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock3 1.3.6.1.4.1.3052.14.2.1.2.1.21
Combined status string intended to be parsed by NMS: numInBlock~name17`value17`eventColorCode17`alias17~name18`value18`eventColorCode18`alias18~...name24`value24`eventColorCode24`alias24
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock4 1.3.6.1.4.1.3052.14.2.1.2.1.22
Combined status string intended to be parsed by NMS: numInBlock~name25`value25`eventColorCode25`alias25~name26`value26`eventColorCode26`alias26~...name32`value32`eventColorCode32`alias32
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock5 1.3.6.1.4.1.3052.14.2.1.2.1.23
Combined status string intended to be parsed by NMS: numInBlock~name33`value33`eventColorCode33`alias33~name34`value34`eventColorCode34`alias35~...name40`value40`eventColorCode40`alias40
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock6 1.3.6.1.4.1.3052.14.2.1.2.1.24
Combined status string intended to be parsed by NMS: numInBlock~name41`value41`eventColorCode41`alias41~name42`value42`eventColorCode42`alias43~...name48`value48`eventColorCode48`alias48
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock7 1.3.6.1.4.1.3052.14.2.1.2.1.25
Combined status string intended to be parsed by NMS: numInBlock~name49`value49`eventColorCode49`alias49~name50`value50`eventColorCode50`alias50~...name56`value56`eventColorCode56`alias56
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esCCCombinedStatusBlock8 1.3.6.1.4.1.3052.14.2.1.2.1.26
Combined status string intended to be parsed by NMS: numInBlock~name57`value57`eventColorCode57`alias57~name57`value57`eventColorCode564`alias57~...name64`value64`eventColorCode64`alias64
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esHumidCombinedStatus 1.3.6.1.4.1.3052.14.2.1.2.1.27
Combined status string intended to be parsed by NMS: name`value`eventState`eventColorCode
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock1 1.3.6.1.4.1.3052.14.2.1.2.1.28
Combined status string intended to be parsed by NMS: numInBlock~name1`value1`units1`eventState`eventColorCode1~name2`value2`units2`eventState`eventColorCode2~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock2 1.3.6.1.4.1.3052.14.2.1.2.1.29
Combined status string intended to be parsed by NMS: numInBlock~name9`value9`units9`eventState9`eventColorCode9~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock3 1.3.6.1.4.1.3052.14.2.1.2.1.30
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock4 1.3.6.1.4.1.3052.14.2.1.2.1.31
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock5 1.3.6.1.4.1.3052.14.2.1.2.1.32
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esAnalogCombinedStatusBlock6 1.3.6.1.4.1.3052.14.2.1.2.1.33
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esOutputCombinedStatusBlock1 1.3.6.1.4.1.3052.14.2.1.2.1.34
Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~...
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esOutputCombinedStatusBlock2 1.3.6.1.4.1.3052.14.2.1.2.1.35
Combined status string intended to be parsed by NMS: numInBlock`namex`valuex`aliasx~namey`valuey`aliasy~...namez`valuez`aliasz
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esNewSensors 1.3.6.1.4.1.3052.14.2.1.3
String representing the number of new (attached but unconfigured) EventSensors
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

esPointConfigTempTable 1.3.6.1.4.1.3052.14.2.2.1
This table organizes 3 basic attributes of temperature sensor points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number (always 1 for temp sensors) Points are referenced by a point config index. The point config index is a string of 2 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor within the context of this emperature point config table ; namely, which EventSensor, and which sensor (a.k.a. point) (always 1 for temperature sensors).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPointConfigTemp

esPointConfigTempEntry 1.3.6.1.4.1.3052.14.2.2.1.1
Entry for EventSensor point config temperature table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPointConfigTemp  

espcTempIndexES 1.3.6.1.4.1.3052.14.2.2.1.1.1
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config temperature table; namely, which EventSensor, and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors. The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu. For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

espcTempIndexPoint 1.3.6.1.4.1.3052.14.2.2.1.1.2
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcTempIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of temperature point configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

espcTempEnable 1.3.6.1.4.1.3052.14.2.2.1.1.3
ON/OFF enable this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempScale 1.3.6.1.4.1.3052.14.2.2.1.1.4
Scale (C/F) for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempDeadband 1.3.6.1.4.1.3052.14.2.2.1.1.5
Deadband for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVHighTemp 1.3.6.1.4.1.3052.14.2.2.1.1.6
Very high temperature event threshold for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVHighActions 1.3.6.1.4.1.3052.14.2.2.1.1.7
Very high temperature event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVHighTrapnum 1.3.6.1.4.1.3052.14.2.2.1.1.8
Very high temperature event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempVHighClass 1.3.6.1.4.1.3052.14.2.2.1.1.9
Very high temperature event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempHighTemp 1.3.6.1.4.1.3052.14.2.2.1.1.10
High temperature event threshold for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempHighActions 1.3.6.1.4.1.3052.14.2.2.1.1.11
High temperature event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempHighTrapnum 1.3.6.1.4.1.3052.14.2.2.1.1.12
High temperature event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempHighClass 1.3.6.1.4.1.3052.14.2.2.1.1.13
High temperature event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempNormalActions 1.3.6.1.4.1.3052.14.2.2.1.1.14
Return-to-normal event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempNormalTrapnum 1.3.6.1.4.1.3052.14.2.2.1.1.15
Return-to-normal event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempNormalClass 1.3.6.1.4.1.3052.14.2.2.1.1.16
Return-to-normal event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempLowTemp 1.3.6.1.4.1.3052.14.2.2.1.1.17
Low temperature event threshold for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempLowActions 1.3.6.1.4.1.3052.14.2.2.1.1.18
Low temperature event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempLowTrapnum 1.3.6.1.4.1.3052.14.2.2.1.1.19
Low temperature event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempLowClass 1.3.6.1.4.1.3052.14.2.2.1.1.20
Low temperature event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVLowTemp 1.3.6.1.4.1.3052.14.2.2.1.1.21
Very Low temperature event threshold for this temperature sensor (in floating-point format)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVLowActions 1.3.6.1.4.1.3052.14.2.2.1.1.22
Very Low temperature event actions for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcTempVLowTrapnum 1.3.6.1.4.1.3052.14.2.2.1.1.23
Very Low temperature event trap number for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcTempVLowClass 1.3.6.1.4.1.3052.14.2.2.1.1.24
Very Low temperature event class for this temperature sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

esPointConfigCCTable 1.3.6.1.4.1.3052.14.2.2.2
This table organizes 3 basic attributes of contact closure points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this contact closure point config table ; namely, which EventSensor and which sensor.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPointConfigCC

esPointConfigCCEntry 1.3.6.1.4.1.3052.14.2.2.2.1
Entry for EventSensor point config contact closure table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPointConfigCC  

espcCCIndexES 1.3.6.1.4.1.3052.14.2.2.2.1.1
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

espcCCIndexPoint 1.3.6.1.4.1.3052.14.2.2.2.1.2
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcCCIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

espcCCEnable 1.3.6.1.4.1.3052.14.2.2.2.1.3
ON/OFF enable for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCName 1.3.6.1.4.1.3052.14.2.2.2.1.4
Name for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCEventState 1.3.6.1.4.1.3052.14.2.2.2.1.5
Event state for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCThreshold 1.3.6.1.4.1.3052.14.2.2.2.1.6
Event threshold (seconds) for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

espcCCEventActions 1.3.6.1.4.1.3052.14.2.2.2.1.7
Event actions for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCEventTrapnum 1.3.6.1.4.1.3052.14.2.2.2.1.8
Event trap number for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcCCEventClass 1.3.6.1.4.1.3052.14.2.2.2.1.9
Event class for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCNormalActions 1.3.6.1.4.1.3052.14.2.2.2.1.10
Return-to-normal actions for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCNormalTrapnum 1.3.6.1.4.1.3052.14.2.2.2.1.11
Return-to-normal trap number for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcCCNormalClass 1.3.6.1.4.1.3052.14.2.2.2.1.12
Return-to-normal class for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCAlarmAlias 1.3.6.1.4.1.3052.14.2.2.2.1.13
Event alias for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCNormalAlias 1.3.6.1.4.1.3052.14.2.2.2.1.14
Return-to-normal alias for this contact closure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCNormalThreshold 1.3.6.1.4.1.3052.14.2.2.2.1.15
Event threshold (seconds) for this contact closure to return to normal
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

espcCCOverrideGlobalReminder 1.3.6.1.4.1.3052.14.2.2.2.1.16
Override global reminder interval (evReminderInterval) for this CC.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcCCReminderInterval 1.3.6.1.4.1.3052.14.2.2.2.1.17
Individual reminder interval for this CC, applicable when the global reminder is overriden.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

esPointConfigHumidTable 1.3.6.1.4.1.3052.14.2.2.3
This table organizes 3 basic attributes of humidity points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number (always 1 for humidity sensors) Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this humidity point config table ; namely, which EventSensor and which sensor.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPointConfigHumid

esPointConfigHumidEntry 1.3.6.1.4.1.3052.14.2.2.3.1
Entry for EventSensor point config humidity table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPointConfigHumid  

espcHumidIndexES 1.3.6.1.4.1.3052.14.2.2.3.1.1
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

espcHumidIndexPoint 1.3.6.1.4.1.3052.14.2.2.3.1.2
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcHumidIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

espcHumidEnable 1.3.6.1.4.1.3052.14.2.2.3.1.3
ON/OFF enable for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidDeadband 1.3.6.1.4.1.3052.14.2.2.3.1.4
Deadband for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVHighHumid 1.3.6.1.4.1.3052.14.2.2.3.1.5
Very high event threshold for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVHighActions 1.3.6.1.4.1.3052.14.2.2.3.1.6
Very high event actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidVHighTrapnum 1.3.6.1.4.1.3052.14.2.2.3.1.7
Very high event trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVHighClass 1.3.6.1.4.1.3052.14.2.2.3.1.8
Very high event class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidHighHumid 1.3.6.1.4.1.3052.14.2.2.3.1.9
High event threshold for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidHighActions 1.3.6.1.4.1.3052.14.2.2.3.1.10
High event actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidHighTrapnum 1.3.6.1.4.1.3052.14.2.2.3.1.11
High event trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidHighClass 1.3.6.1.4.1.3052.14.2.2.3.1.12
High event class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidNormalActions 1.3.6.1.4.1.3052.14.2.2.3.1.13
Return-to-normal actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidNormalTrapnum 1.3.6.1.4.1.3052.14.2.2.3.1.14
Return-to-normal trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidNormalClass 1.3.6.1.4.1.3052.14.2.2.3.1.15
Return-to-normal class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidLowHumid 1.3.6.1.4.1.3052.14.2.2.3.1.16
Low event threshold for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidLowActions 1.3.6.1.4.1.3052.14.2.2.3.1.17
Low event actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidLowTrapnum 1.3.6.1.4.1.3052.14.2.2.3.1.18
Low event trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidLowClass 1.3.6.1.4.1.3052.14.2.2.3.1.19
Low event class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidVLowHumid 1.3.6.1.4.1.3052.14.2.2.3.1.20
Very low event threshold for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVLowActions 1.3.6.1.4.1.3052.14.2.2.3.1.21
Very low event actions for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcHumidVLowTrapnum 1.3.6.1.4.1.3052.14.2.2.3.1.22
Very low event trap number for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcHumidVLowClass 1.3.6.1.4.1.3052.14.2.2.3.1.23
Very low event class for this humidity sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

esPointConfigAITable 1.3.6.1.4.1.3052.14.2.2.5
This table organizes 3 basic attributes of analog input points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this analog input point config table ; namely, which EventSensor and which sensor.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPointConfigAnalogInput

esPointConfigAIEntry 1.3.6.1.4.1.3052.14.2.2.5.1
Entry for EventSensor point config analog input table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPointConfigAnalogInput  

espcAIIndexES 1.3.6.1.4.1.3052.14.2.2.5.1.1
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

espcAIIndexPoint 1.3.6.1.4.1.3052.14.2.2.5.1.2
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcAIIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of contact closure point configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

espcAIEnable 1.3.6.1.4.1.3052.14.2.2.5.1.3
ON/OFF for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIDeadband 1.3.6.1.4.1.3052.14.2.2.5.1.5
Deadband for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIVhighValue 1.3.6.1.4.1.3052.14.2.2.5.1.6
Very high event threshold (decivolts or tenths of milliamps) for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIVhighActions 1.3.6.1.4.1.3052.14.2.2.5.1.7
Very high event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIVhighTrapnum 1.3.6.1.4.1.3052.14.2.2.5.1.8
Very high event trap number for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIVhighClass 1.3.6.1.4.1.3052.14.2.2.5.1.9
Very high event class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIHighValue 1.3.6.1.4.1.3052.14.2.2.5.1.10
High event threshold (decivolts or tenths of milliamps) for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIHighActions 1.3.6.1.4.1.3052.14.2.2.5.1.11
High event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIHighTrapnum 1.3.6.1.4.1.3052.14.2.2.5.1.12
High event trap number for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIHighClass 1.3.6.1.4.1.3052.14.2.2.5.1.13
High event class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAINormalActions 1.3.6.1.4.1.3052.14.2.2.5.1.14
Return-to-normal actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAINormalTrapnum 1.3.6.1.4.1.3052.14.2.2.5.1.15
Return-to-normal trap number for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAINormalClass 1.3.6.1.4.1.3052.14.2.2.5.1.16
Return-to-normal class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAILowValue 1.3.6.1.4.1.3052.14.2.2.5.1.17
Low event threshold (decivolts or tenths of milliamps) for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAILowActions 1.3.6.1.4.1.3052.14.2.2.5.1.18
Low event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAILowTrapnum 1.3.6.1.4.1.3052.14.2.2.5.1.19
Low event trap number for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAILowClass 1.3.6.1.4.1.3052.14.2.2.5.1.20
Low event class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIVlowValue 1.3.6.1.4.1.3052.14.2.2.5.1.21
Very low event threshold (decivolts or tenths of milliamps) for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIVlowActions 1.3.6.1.4.1.3052.14.2.2.5.1.22
Very low event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIVlowTrapnum 1.3.6.1.4.1.3052.14.2.2.5.1.23
Very low event actions for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

espcAIVlowClass 1.3.6.1.4.1.3052.14.2.2.5.1.24
Very low event class for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIConvUnitName 1.3.6.1.4.1.3052.14.2.2.5.1.25
Converstion unit name for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIConvHighValue 1.3.6.1.4.1.3052.14.2.2.5.1.26
Conversion high value for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIConvHighUnit 1.3.6.1.4.1.3052.14.2.2.5.1.27
Conversion high unit value for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIConvLowValue 1.3.6.1.4.1.3052.14.2.2.5.1.29
Conversion low value for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIConvLowUnit 1.3.6.1.4.1.3052.14.2.2.5.1.30
Conversion unit low unit value for this analog input sensor
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcAIDisplayFormat 1.3.6.1.4.1.3052.14.2.2.5.1.32
Analog input display format
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

esPointConfigOutputTable 1.3.6.1.4.1.3052.14.2.2.6
This table organizes configuration items for output points. A point is a particular sensor on an EventSensor. The 3 point attributes organized in this table are: 1. the configuration item (e.g., enable, name, etc.) 2. the eventsensor on which this point resides 3. the point number Points are referenced by a point config index. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the context of this output config table ; namely, which EventSensor and which sensor.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ESPointConfigOutput

esPointConfigOutputEntry 1.3.6.1.4.1.3052.14.2.2.6.1
Entry for EventSensor point config output table
Status: current Access: not-accessible
OBJECT-TYPE    
  ESPointConfigOutput  

espcOutputIndexES 1.3.6.1.4.1.3052.14.2.2.6.1.1
The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the information necessary for getting a piece of data off an event sensor within the the context of the eventsensor point config contact closure table; namely, which EventSensor and which sensor (a.k.a. point). This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200  

espcOutputIndexPoint 1.3.6.1.4.1.3052.14.2.2.6.1.2
The part of the point index that delineates which sensor on the EventSensor. So this combined with espcOutputIndexES (which EventSensor) uniquely defines each point attached to a unit within the context of output point configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

espcOutputEnable 1.3.6.1.4.1.3052.14.2.2.6.1.3
Enables the output event for this output. This has no effect on whether the relay changes state, only on whether a state change triggers an event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcOutputActiveState 1.3.6.1.4.1.3052.14.2.2.6.1.4
Which state is considered the active state: energized/de-energized.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcOutputType 1.3.6.1.4.1.3052.14.2.2.6.1.5
Output type: RELAY, POWER, SSR, TTL.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

espcOutputAliasValue 1.3.6.1.4.1.3052.14.2.2.6.1.6
Output alias corresponding to its event state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

espcOutputAliasColor 1.3.6.1.4.1.3052.14.2.2.6.1.7
Output color corresponding to its event state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

espcOutputActiveAlias 1.3.6.1.4.1.3052.14.2.2.6.1.10
Alias for the output active state.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcOutputActiveColor 1.3.6.1.4.1.3052.14.2.2.6.1.11
Output color (as rendered in the web UI, in RGB hex format) corresponding to the output active state.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcOutputActiveActions 1.3.6.1.4.1.3052.14.2.2.6.1.12
Actions for the output active event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcOutputActiveTrapnum 1.3.6.1.4.1.3052.14.2.2.6.1.13
Actions for the output active event.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 150..1199  

espcOutputActiveClass 1.3.6.1.4.1.3052.14.2.2.6.1.14
Class (severity) for the output active event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcOutputInactiveAlias 1.3.6.1.4.1.3052.14.2.2.6.1.20
Alias for the output inactive state.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcOutputInactiveColor 1.3.6.1.4.1.3052.14.2.2.6.1.21
Output color (as rendered in the web UI, in RGB hex format) corresponding to the output inactive state.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcOutputInactiveActions 1.3.6.1.4.1.3052.14.2.2.6.1.22
Actions for the output inactive event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

espcOutputInactiveTrapnum 1.3.6.1.4.1.3052.14.2.2.6.1.23
Actions for the output inactive event.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 150..1199  

espcOutputInactiveClass 1.3.6.1.4.1.3052.14.2.2.6.1.24
Class (severity) for the output inactive event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

numberPorts 1.3.6.1.4.1.3052.14.2.3.1
Number of RS-232 ports found. Range: 2 or 4
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portConfigTable 1.3.6.1.4.1.3052.14.2.3.2
Port config table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortConfig

portConfigEntry 1.3.6.1.4.1.3052.14.2.3.2.1
Port config entry
Status: current Access: not-accessible
OBJECT-TYPE    
  PortConfig  

portConfigIndex 1.3.6.1.4.1.3052.14.2.3.2.1.1
Index for ports
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

portConfigBaud 1.3.6.1.4.1.3052.14.2.3.2.1.2
Baud rate, 19200, 9600, etc.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigDataFormat 1.3.6.1.4.1.3052.14.2.3.2.1.3
Value representing word length, parity, and stop bits: 0=8N1, 1=7E1, 2=7O1, 3=7N1, 4=8O2
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigStripPtOutputLfs 1.3.6.1.4.1.3052.14.2.3.2.1.4
Strip passthrough LFs sent to device on this port: 1=yes, 0=no.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigStripPtInputLfs 1.3.6.1.4.1.3052.14.2.3.2.1.5
Strip passthrough LFs received from device on this port: 1=yes, 0=no.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMaskEnable 1.3.6.1.4.1.3052.14.2.3.2.1.7
1=Use the character mask on this port. 0=Do not use the mask. When the mask is enabled, the following ASCII characters are ignored on the port: 0, 1, 4-9, 11, 12, 14-31, 128-255. When the mask is disabled, all characters are accepted on the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigDAEnable 1.3.6.1.4.1.3052.14.2.3.2.1.8
1=Enable the Data Alarm Evaluator for data on this port. 0=Do not evaluate data on this port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigStoreAlarmsDPT 1.3.6.1.4.1.3052.14.2.3.2.1.9
ON/OFF: store alarms received during passthrough
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigRecordTimeout 1.3.6.1.4.1.3052.14.2.3.2.1.10
Timeout after last unterminated data received upon which data collected so far is stored as a record.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigDataType 1.3.6.1.4.1.3052.14.2.3.2.1.11
How the port interprets incoming data: ASCII/BINARY
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigEtxToCRLF 1.3.6.1.4.1.3052.14.2.3.2.1.12
ON/OFF whether the port translates incoming ETX to CRLF
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLREnable 1.3.6.1.4.1.3052.14.2.3.2.1.13
ON/OFF Whether Multiline Records are collected on this port.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRStartField1Pos 1.3.6.1.4.1.3052.14.2.3.2.1.14
Position of MLR start field 1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLRStartField1Text 1.3.6.1.4.1.3052.14.2.3.2.1.15
Text to match MLR start field 1
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRStartField2Pos 1.3.6.1.4.1.3052.14.2.3.2.1.16
Position of MLR start field 2
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLRStartField2Text 1.3.6.1.4.1.3052.14.2.3.2.1.17
Text to match MLR start field 2
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRNumLinesBefore 1.3.6.1.4.1.3052.14.2.3.2.1.18
Number of lines before the starting line which should be included in the MLR
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLREndDetection 1.3.6.1.4.1.3052.14.2.3.2.1.19
How the MLR parser determines what ends an MLR: by FORMULA, number of lines received so far (COUNT), or number of blank lines received so far (BLANKS)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRLineCount 1.3.6.1.4.1.3052.14.2.3.2.1.20
Number of lines in the MLR (used by the end detection mode)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLREndField1Pos 1.3.6.1.4.1.3052.14.2.3.2.1.21
Position of MLR end field 1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLREndField1Text 1.3.6.1.4.1.3052.14.2.3.2.1.22
Text to match MLR end field 1
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLREndField2Pos 1.3.6.1.4.1.3052.14.2.3.2.1.23
Position of MLR end field 2
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

portConfigMLREndField2Text 1.3.6.1.4.1.3052.14.2.3.2.1.24
Text to match MLR end field 2
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMLRUseComplexRules 1.3.6.1.4.1.3052.14.2.3.2.1.25
ON/OFF MLR parser uses complex rules (field possitions/ formulas, etc.)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigBufferPT 1.3.6.1.4.1.3052.14.2.3.2.1.26
ON/OFF records received during passthrough mode are buffered/stored in the database
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigId 1.3.6.1.4.1.3052.14.2.3.2.1.27
The text identifer for the port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigMode 1.3.6.1.4.1.3052.14.2.3.2.1.28
Mode of the serial port.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

portConfigHsk 1.3.6.1.4.1.3052.14.2.3.2.1.29
Handshaking mode of the serial port.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

eth1Mode 1.3.6.1.4.1.3052.14.2.4.1.1.1.1
Mode of the Ethernet1 interface: STATIC,DHCP,VLAN
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth1Address 1.3.6.1.4.1.3052.14.2.4.1.1.1.2
Ethernet1 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.1.3
Ethernet1 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1Router 1.3.6.1.4.1.3052.14.2.4.1.1.1.4
Ethernet1 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN1ID 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.1.1
Ethernet1 VLAN1 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN1Priority 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.1.2
Ethernet1 VLAN1 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN1Address 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.1.3
Ethernet1 VLAN1 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN1SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.1.4
Ethernet1 VLAN1 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN1Router 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.1.5
Ethernet1 VLAN1 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN2ID 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.2.1
Ethernet1 VLAN2 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN2Priority 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.2.2
Ethernet1 VLAN2 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN2Address 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.2.3
Ethernet1 VLAN2 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN2SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.2.4
Ethernet1 VLAN2 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN2Router 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.2.5
Ethernet1 VLAN2 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN3ID 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.3.1
Ethernet1 VLAN3 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN3Priority 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.3.2
Ethernet1 VLAN3 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN3Address 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.3.3
Ethernet1 VLAN3 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN3SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.3.4
Ethernet1 VLAN3 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN3Router 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.3.5
Ethernet1 VLAN3 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN4ID 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.4.1
Ethernet1 VLAN4 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN4Priority 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.4.2
Ethernet1 VLAN4 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN4Address 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.4.3
Ethernet1 VLAN4 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN4SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.4.4
Ethernet1 VLAN4 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN4Router 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.4.5
Ethernet1 VLAN4 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN5ID 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.5.1
Ethernet1 VLAN5 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN5Priority 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.5.2
Ethernet1 VLAN5 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN5Address 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.5.3
Ethernet1 VLAN5 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN5SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.5.4
Ethernet1 VLAN5 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN5Router 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.5.5
Ethernet1 VLAN5 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN6ID 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.6.1
Ethernet1 VLAN6 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN6Priority 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.6.2
Ethernet1 VLAN6 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth1VLAN6Address 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.6.3
Ethernet1 VLAN6 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN6SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.6.4
Ethernet1 VLAN6 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1VLAN6Router 1.3.6.1.4.1.3052.14.2.4.1.1.1.5.6.5
Ethernet1 VLAN6 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth1MAC 1.3.6.1.4.1.3052.14.2.4.1.1.1.6
Ethernet1 MAC
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth1IPv6Mode 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.1
Controls IPv6 operation for this Ethernet interface.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

eth1IPv6StaticAddress 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.2.1
he static IPv6 address to use for this interface when in operating in STATIC mode.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

eth1IPv6StaticRouter 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.2.2
The IPv6 router to engage as the default router when this interface operates in STATIC mode.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

eth1IPv6AutoAddress1 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.3.1
One of the automatically-acquired IPv6 addresses.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth1IPv6AutoAddress2 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.3.2
One of the automatically-acquired IPv6 addresses.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth1IPv6AutoAddress3 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.3.3
One of the automatically-acquired IPv6 addresses.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth1IPv6AutoAddress4 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.3.4
One of the automatically-acquired IPv6 addresses.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth1IPv6LinkLocalAddress 1.3.6.1.4.1.3052.14.2.4.1.1.1.7.4
The link local IPv6 address for this interface. This is present when the IPv6 mode is not OFF.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth2Mode 1.3.6.1.4.1.3052.14.2.4.1.1.2.1
Mode of the Ethernet2 interface: STATIC,DHCP,VLAN
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth2Address 1.3.6.1.4.1.3052.14.2.4.1.1.2.2
Ethernet2 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.2.3
Ethernet2 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2Router 1.3.6.1.4.1.3052.14.2.4.1.1.2.4
Ethernet2 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN1ID 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.1.1
Ethernet2 VLAN1 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN1Priority 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.1.2
Ethernet2 VLAN1 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN1Address 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.1.3
Ethernet2 VLAN1 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN1SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.1.4
Ethernet2 VLAN1 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN1Router 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.1.5
Ethernet2 VLAN1 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN2ID 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.2.1
Ethernet2 VLAN2 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN2Priority 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.2.2
Ethernet2 VLAN2 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN2Address 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.2.3
Ethernet2 VLAN2 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN2SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.2.4
Ethernet2 VLAN2 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN2Router 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.2.5
Ethernet2 VLAN2 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN3ID 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.3.1
Ethernet2 VLAN3 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN3Priority 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.3.2
Ethernet2 VLAN3 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN3Address 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.3.3
Ethernet2 VLAN3 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN3SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.3.4
Ethernet2 VLAN3 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN3Router 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.3.5
Ethernet2 VLAN3 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN4ID 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.4.1
Ethernet2 VLAN4 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN4Priority 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.4.2
Ethernet2 VLAN4 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN4Address 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.4.3
Ethernet2 VLAN4 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN4SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.4.4
Ethernet2 VLAN4 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN4Router 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.4.5
Ethernet2 VLAN4 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN5ID 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.5.1
Ethernet2 VLAN5 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN5Priority 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.5.2
Ethernet2 VLAN5 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN5Address 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.5.3
Ethernet2 VLAN5 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN5SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.5.4
Ethernet2 VLAN5 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN5Router 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.5.5
Ethernet2 VLAN5 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN6ID 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.6.1
Ethernet2 VLAN6 ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN6Priority 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.6.2
Ethernet2 VLAN6 priority
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eth2VLAN6Address 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.6.3
Ethernet2 VLAN6 IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN6SubnetMask 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.6.4
Ethernet2 VLAN6 subnet mask
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2VLAN6Router 1.3.6.1.4.1.3052.14.2.4.1.1.2.5.6.5
Ethernet2 VLAN6 router
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eth2MAC 1.3.6.1.4.1.3052.14.2.4.1.1.2.6
Ethernet2 MAC
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth2IPv6Mode 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.1
Controls IPv6 operation for this Ethernet interface.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

eth2IPv6StaticAddress 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.2.1
he static IPv6 address to use for this interface when in operating in STATIC mode.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

eth2IPv6StaticRouter 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.2.2
The IPv6 router to engage as the default router when this interface operates in STATIC mode.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

eth2IPv6AutoAddress1 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.3.1
One of the automatically-acquired IPv6 addresses.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth2IPv6AutoAddress2 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.3.2
One of the automatically-acquired IPv6 addresses.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth2IPv6AutoAddress3 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.3.3
One of the automatically-acquired IPv6 addresses.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth2IPv6AutoAddress4 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.3.4
One of the automatically-acquired IPv6 addresses.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eth2IPv6LinkLocalAddress 1.3.6.1.4.1.3052.14.2.4.1.1.2.7.4
The link local IPv6 address for this interface. This is present when the IPv6 mode is not OFF.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

defaultRouter 1.3.6.1.4.1.3052.14.2.4.2
The default router/gateway
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

dnsTable 1.3.6.1.4.1.3052.14.2.4.3
DNS server address table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DNSConfig

dnsEntry 1.3.6.1.4.1.3052.14.2.4.3.1
DNS server address entry
Status: current Access: not-accessible
OBJECT-TYPE    
  DNSConfig  

dnsIndex 1.3.6.1.4.1.3052.14.2.4.3.1.1
Index for DNS server address
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

dnsAddress 1.3.6.1.4.1.3052.14.2.4.3.1.2
DNS server address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hostname 1.3.6.1.4.1.3052.14.2.4.4
The hostname of the unit
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hostTable 1.3.6.1.4.1.3052.14.2.4.5
Static host table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HostConfig

hostEntry 1.3.6.1.4.1.3052.14.2.4.5.1
Static host entry
Status: current Access: not-accessible
OBJECT-TYPE    
  HostConfig  

hostIndex 1.3.6.1.4.1.3052.14.2.4.5.1.1
Index for static host
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2  

hostDeclaration 1.3.6.1.4.1.3052.14.2.4.5.1.2
Static host declaration string (i.e. 'address hostname')
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ncpDuplex 1.3.6.1.4.1.3052.14.2.4.6
For network command processor: 1=Input characters are echoed; 0=no echo.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ncpTimeout 1.3.6.1.4.1.3052.14.2.4.7
Network command processor inactivity timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpAgentEnable 1.3.6.1.4.1.3052.14.2.4.8.1
ON/OFF for snmp agent
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpNotificationCaptureEnable 1.3.6.1.4.1.3052.14.2.4.8.5
ON/OFF unit receives and stores SNMP traps/informs
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpNotificationCaptureFile 1.3.6.1.4.1.3052.14.2.4.8.6
File to which unit stores received SNMP traps/informs
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpNtfnAttempts 1.3.6.1.4.1.3052.14.2.4.8.7.1
Maximum of times the unit attempts to send a notification (trap/inform) in 1 cycle
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpNtfnTimeout 1.3.6.1.4.1.3052.14.2.4.8.7.2
Number of seconds between retries of sending a notification
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpNtfnCycles 1.3.6.1.4.1.3052.14.2.4.8.7.3
Number of times the unit attempts a group of attempts to send a notification (a cycle)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpNtfnSnooze 1.3.6.1.4.1.3052.14.2.4.8.7.4
Minutes between cycles
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpPMode 1.3.6.1.4.1.3052.14.2.4.8.9.1
Mode of poll operation: OFF, POLL ONLY (just make the results available to view), or POLL BUFFER (store the results).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPBufferFile 1.3.6.1.4.1.3052.14.2.4.8.9.2
CRDB file in which data is stored.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPBufferAllPeriod 1.3.6.1.4.1.3052.14.2.4.8.9.3
Period (in seconds) that, if non-zero, all results are buffered in the CRDB regardless of the threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

snmpPRequestTable 1.3.6.1.4.1.3052.14.2.4.8.9.4
Table of SNMP Poll requests.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SNMPPollRequestConfig

snmpPRequestEntry 1.3.6.1.4.1.3052.14.2.4.8.9.4.1
Entry for table pf SNMP Poll requests.
Status: current Access: not-accessible
OBJECT-TYPE    
  SNMPPollRequestConfig  

snmpPRequestIndex 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.1
Index for table of SNMP Poll requests.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

snmpPRequestDescription 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.2
A description for this single telemetry request; no functional effect.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestAgent 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.3
SNMP Agent IP address or hostname for this single telemetry request.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestReadcom 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.4
SNMP read community for this single telemetry request.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestOID 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.5
SNMP object identifier for this single telemetry request.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestPeriod 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.6
How many seconds between periodic SNMP polls of this single telemetry request.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

snmpPRequestID 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.7
A textual field that is part of the record containing the telemetry result.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestThreshold 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.8
Controls when new data is stored upon a successful telemetry request.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpPRequestResultStatus 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.10
Status of the last attempt for this telemetry request.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpPRequestResultValue 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.11
The telemetry value if the last request was successful.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpPRequestResultTime 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.12
The timestamp of the last telemetry request.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpPRequestResultType 1.3.6.1.4.1.3052.14.2.4.8.9.4.1.13
The type of the telemetry as reported by the agent.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ftpPushEnable 1.3.6.1.4.1.3052.14.2.4.9.1
Enable FTP push for REGULAR (protocol: FTP) or SECURE (protocol: SFTP) operation, or disable it (OFF)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushServer 1.3.6.1.4.1.3052.14.2.4.9.2
FTP server to which data should be pushed
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushAccount 1.3.6.1.4.1.3052.14.2.4.9.5
FTP push account
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushDirectory 1.3.6.1.4.1.3052.14.2.4.9.6
FTP push directory
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushperiod 1.3.6.1.4.1.3052.14.2.4.9.7
Minutes between pushes
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ftpPushPushFileTable 1.3.6.1.4.1.3052.14.2.4.9.8
Table of files to push
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FTPPushPushFileConfig

ftpPushPushFileEntry 1.3.6.1.4.1.3052.14.2.4.9.8.1
Entry for table of files to push
Status: current Access: not-accessible
OBJECT-TYPE    
  FTPPushPushFileConfig  

ftpPushPushFileIndex 1.3.6.1.4.1.3052.14.2.4.9.8.1.1
Index for table of files to push
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

ftpPushPushFile 1.3.6.1.4.1.3052.14.2.4.9.8.1.2
ON/OFF push this local FILEx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushPushAudit 1.3.6.1.4.1.3052.14.2.4.9.9
ON/OFF push the audit log
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushPushAlarms 1.3.6.1.4.1.3052.14.2.4.9.10
ON/OFF push the alarms/events file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushRemoteFileTable 1.3.6.1.4.1.3052.14.2.4.9.11
Table of remote names of files to push
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FTPPushRemoteFileConfig

ftpPushRemoteFileEntry 1.3.6.1.4.1.3052.14.2.4.9.11.1
Entry for table of remote names of files to push
Status: current Access: not-accessible
OBJECT-TYPE    
  FTPPushRemoteFileConfig  

ftpPushRemoteFileIndex 1.3.6.1.4.1.3052.14.2.4.9.11.1.1
Index for table of remote names of files to push
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

ftpPushRemoteFileName 1.3.6.1.4.1.3052.14.2.4.9.11.1.2
remote name of pushed FILEx (name on server)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushRemoteAlarmName 1.3.6.1.4.1.3052.14.2.4.9.12
Filename on server for alarms
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushPassive 1.3.6.1.4.1.3052.14.2.4.9.13
ON/OFF use ftp passive mode
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushIncludeDate 1.3.6.1.4.1.3052.14.2.4.9.14
ON/OFF include the date in the name of the pushed file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushIncludeTime 1.3.6.1.4.1.3052.14.2.4.9.15
ON/OFF include the time in the name of the pushed file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushIncludeSeq 1.3.6.1.4.1.3052.14.2.4.9.16
ON/OFF include a sequence number in the name of the pushed file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ftpPushPermissions 1.3.6.1.4.1.3052.14.2.4.9.17
Unix permissions to apply to pushed files (octal notation).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pppDialEnable 1.3.6.1.4.1.3052.14.2.4.10.1.1
ON/OFF PPP dialout enabled
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pppDialNumber 1.3.6.1.4.1.3052.14.2.4.10.1.2
phone number to dial
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pppDialIdleTimeout 1.3.6.1.4.1.3052.14.2.4.10.1.5
Seconds of inactivity after which the unit disconnects
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pppDialRetries 1.3.6.1.4.1.3052.14.2.4.10.1.6
Number of dialing retries for PPP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pppDialCDTimeout 1.3.6.1.4.1.3052.14.2.4.10.1.7
Number of seconds to wait after dialing for CD before giving up
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pppDialLoginTimeout 1.3.6.1.4.1.3052.14.2.4.10.1.8
Seconds to wait to negotiate PPP after connecting
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pppDialMdmInit 1.3.6.1.4.1.3052.14.2.4.10.1.9
Modem init string to use when dialing PPP
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pppDialSuggestIP 1.3.6.1.4.1.3052.14.2.4.10.1.10
IP address to suggest as the unit's end (local end) of the PPP link
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pppDialPlainLogin 1.3.6.1.4.1.3052.14.2.4.10.1.11
ON/OFF look for login/password prompt before negotiating PPP
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pppHostEnable 1.3.6.1.4.1.3052.14.2.4.10.2.1
ON/OFF Unit accepts PPP negotiation
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pppHostIdleTimeout 1.3.6.1.4.1.3052.14.2.4.10.2.2
Seconds of inactivity after which PPP-hosted link will terminate
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

pppHostLocalIP 1.3.6.1.4.1.3052.14.2.4.10.2.3
Local IP address to negotiate
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pppHostRemoteIP 1.3.6.1.4.1.3052.14.2.4.10.2.4
Remote IP address to hand out to PPP peer
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pppRoutingEnable 1.3.6.1.4.1.3052.14.2.4.11.1
ON/OFF unit routes IP traffic from PPP/Wireless to Ethernet
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ethRoutingEnable 1.3.6.1.4.1.3052.14.2.4.11.2
ON/OFF unit routes IP traffic from Ethernet to PPP/Wireless
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ethRoutingNATEnable 1.3.6.1.4.1.3052.14.2.4.11.3
ON/OFF unit applies NAT on routed IP frames egressing the unit on its PPP interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

routingInterface 1.3.6.1.4.1.3052.14.2.4.11.4
When Ethernet routing is enabled (routing.1), this is the Ethernet interface to which IP frames received on PPP are routed
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

eth2WanRoutingEnable 1.3.6.1.4.1.3052.14.2.4.11.5
Make ETH2 operate as a WAN port to route outbound traffic arriving on ETH1.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ipRestrictionTable 1.3.6.1.4.1.3052.14.2.4.12.1.1
Table of IP restrictions
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IPRestrictionConfig

ipRestrictionEntry 1.3.6.1.4.1.3052.14.2.4.12.1.1.1
Entry for table of IP restrictions
Status: current Access: not-accessible
OBJECT-TYPE    
  IPRestrictionConfig  

ipRestrictionIndex 1.3.6.1.4.1.3052.14.2.4.12.1.1.1.1
Index for table of IP restrictions
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..8  

ipRestrictionEnable 1.3.6.1.4.1.3052.14.2.4.12.1.1.1.2
ON/OFF enable this IP restriction
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ipRestrictionMask 1.3.6.1.4.1.3052.14.2.4.12.1.1.1.3
IP restriction mask
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsFileTable 1.3.6.1.4.1.3052.14.2.4.13.1
Table of RTS files
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RTSFileConfig

rtsFileEntry 1.3.6.1.4.1.3052.14.2.4.13.1.1
Entry for table of RTS files
Status: current Access: not-accessible
OBJECT-TYPE    
  RTSFileConfig  

rtsFileIndex 1.3.6.1.4.1.3052.14.2.4.13.1.1.1
Index for table of RTS files
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

rtsFileMode 1.3.6.1.4.1.3052.14.2.4.13.1.1.2
RTS mode (OFF,LISTEN,PUSH) for FILEx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsFileShowAnswer 1.3.6.1.4.1.3052.14.2.4.13.1.1.3
Show answer string upon RTS connect for FILEx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsFileReqXON 1.3.6.1.4.1.3052.14.2.4.13.1.1.4
ON/OFF require XON to start flow for FILEx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsFileTimeout 1.3.6.1.4.1.3052.14.2.4.13.1.1.5
Idle connection close timer (0 means no timeout) for FILEx
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rtsFileEmptyClose 1.3.6.1.4.1.3052.14.2.4.13.1.1.6
ON/OFF close the socket when FILEx is empty
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsFilePushHost 1.3.6.1.4.1.3052.14.2.4.13.1.1.7
Host to which FILEx should be pushed via RTS
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsFilePushPort 1.3.6.1.4.1.3052.14.2.4.13.1.1.8
TCP port to which FILEx should be pushed via RTS
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rtsFilePushRetryTimer 1.3.6.1.4.1.3052.14.2.4.13.1.1.9
Retry timer (seconds) for retrying failed RTS push connect attempts
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rtsAlarmsMode 1.3.6.1.4.1.3052.14.2.4.13.2.1
RTS mode (OFF,LISTEN,PUSH) for alarms file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsAlarmsShowAnswer 1.3.6.1.4.1.3052.14.2.4.13.2.2
Show answer string upon RTS connect for alarms file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsAlarmsReqXON 1.3.6.1.4.1.3052.14.2.4.13.2.3
ON/OFF require XON to start flow for alarms file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsAlarmsTimeout 1.3.6.1.4.1.3052.14.2.4.13.2.4
Idle connection close timer (0 means no timeout) for alarms file
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rtsAlarmsEmptyClose 1.3.6.1.4.1.3052.14.2.4.13.2.5
ON/OFF close the socket when this file is empty for alarms file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsAlarmsPushHost 1.3.6.1.4.1.3052.14.2.4.13.2.6
Host to which alarms file should be pushed via RTS
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rtsAlarmsPushPort 1.3.6.1.4.1.3052.14.2.4.13.2.7
TCP port to which alarms file should be pushed via RTS
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

rtsAlarmsPushRetryTimer 1.3.6.1.4.1.3052.14.2.4.13.2.8
Retry timer (seconds) for retrying failed RTS push connect attempts
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

trapIncludeDateTime 1.3.6.1.4.1.3052.14.2.4.14.1.1
ON/OFF include date and time in stock trap message
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

trapIncludeSiteName 1.3.6.1.4.1.3052.14.2.4.14.1.2
ON/OFF include site name in stock trap message
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

trapIncludeSensorID 1.3.6.1.4.1.3052.14.2.4.14.1.3
ON/OFF include sensor ID in stock trap message
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

trapIncludeUDName 1.3.6.1.4.1.3052.14.2.4.14.1.4
ON/OFF include user defined name in stock trap message
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

trapIncludeUDState 1.3.6.1.4.1.3052.14.2.4.14.1.5
ON/OFF include user defined state in stock trap message
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

trapIncludeSourceAddress 1.3.6.1.4.1.3052.14.2.4.14.1.6
ON/OFF include source IP address in stock trap message
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

trapAuthFailEnable 1.3.6.1.4.1.3052.14.2.4.14.2
ON/OFF enable trap sent upon SNMP authentication failure
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

routeTestEnable 1.3.6.1.4.1.3052.14.2.4.15.1
ON/OFF enable route testing
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

routeTestPeriod 1.3.6.1.4.1.3052.14.2.4.15.2
The period which a route is considered valid
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

routeTestAddressTable 1.3.6.1.4.1.3052.14.2.4.15.3
Table of route testing addresses
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RouteTestConfig

routeTestAddressEntry 1.3.6.1.4.1.3052.14.2.4.15.3.1
Entry for table of RTS files
Status: current Access: not-accessible
OBJECT-TYPE    
  RouteTestConfig  

routeTestAddressIndex 1.3.6.1.4.1.3052.14.2.4.15.3.1.1
Index for table of RTS files
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

routeTestAddress 1.3.6.1.4.1.3052.14.2.4.15.3.1.2
Address to ping to see if the route to it is valid
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessMode 1.3.6.1.4.1.3052.14.2.4.16.1
Wireless mode (OFF,PERMANENT-EDGE)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessAPN 1.3.6.1.4.1.3052.14.2.4.16.2
Wireless access point name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessIdleTimeout 1.3.6.1.4.1.3052.14.2.4.16.3
Wireless idle timeout
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wirelessPIN 1.3.6.1.4.1.3052.14.2.4.16.5
Wireless modem SIM PIN
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessDRE 1.3.6.1.4.1.3052.14.2.4.16.9
Default route enable for wireless network interface. When this is ON, the wireless link, if up, becomes the default route, overriding the default route setting (defaultRouter object). When OFF, the default route setting controls the default route and the wireless link does not become the default route.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessPPPUsername 1.3.6.1.4.1.3052.14.2.4.16.10
Username for PPP-based wireless modem connections.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessFirewall 1.3.6.1.4.1.3052.14.2.4.16.11
Enable wireless modem firewall.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessKeepaliveThreshold 1.3.6.1.4.1.3052.14.2.4.16.12
Minutes of no RX activity before sending keep-alive.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wirelessPPPDebug 1.3.6.1.4.1.3052.14.2.4.16.13
Enable wireless modem PPP debug.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessConnEnable 1.3.6.1.4.1.3052.14.2.4.16.20.1
Enable wireless modem connectivity check.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wirelessConnCheckInterval 1.3.6.1.4.1.3052.14.2.4.16.20.2
Wireless connectivity check interval in minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wirelessConnFailThreshold 1.3.6.1.4.1.3052.14.2.4.16.20.3
Wireless connectivity fail threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

wirelessConnIP1 1.3.6.1.4.1.3052.14.2.4.16.20.10
Wireless connectivity check IP address 1.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wirelessConnIP2 1.3.6.1.4.1.3052.14.2.4.16.20.11
Wireless connectivity check IP address 2.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

emailServer 1.3.6.1.4.1.3052.14.2.4.17.1
SMTP server to which the unit sends email
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

emailDomain 1.3.6.1.4.1.3052.14.2.4.17.2
Domain to use in recipient address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

emailAuthEnable 1.3.6.1.4.1.3052.14.2.4.17.3
ON/OFF enable SMTP authentication
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

arpFilter 1.3.6.1.4.1.3052.14.2.4.18.1
ARP filter code
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

webEnable 1.3.6.1.4.1.3052.14.2.4.19.1
ON/OFF for the web interface
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

webPort 1.3.6.1.4.1.3052.14.2.4.19.2
TCP port on which web interface listens
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

webTimeout 1.3.6.1.4.1.3052.14.2.4.19.3
Web interface session timeout (seconds)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ipv6DefaultRouter 1.3.6.1.4.1.3052.14.2.4.21.1
The IPv6 default router in use.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

cpeTable 1.3.6.1.4.1.3052.14.2.4.22.1
Table of CPEs
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CPEConfig

cpeEntry 1.3.6.1.4.1.3052.14.2.4.22.1.1
Entry for table of CPEs
Status: current Access: not-accessible
OBJECT-TYPE    
  CPEConfig  

cpeIndex 1.3.6.1.4.1.3052.14.2.4.22.1.1.1
Index for table of CPEs
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

cpeHost 1.3.6.1.4.1.3052.14.2.4.22.1.1.2
CPE host (IP address or DNS name)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

cpeName 1.3.6.1.4.1.3052.14.2.4.22.1.1.3
CPE name, informational only
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

cpeDescription 1.3.6.1.4.1.3052.14.2.4.22.1.1.4
CPE description, informational only
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

cpeKeepalive 1.3.6.1.4.1.3052.14.2.4.22.1.1.5
Number of seconds between each successful ping request.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

cpeThreshold 1.3.6.1.4.1.3052.14.2.4.22.1.1.6
Number of unsuccessful pings that triggers the CPE event.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

cpeEventReminderInterval 1.3.6.1.4.1.3052.14.2.4.22.1.1.7
CPE event reminder interval (minutes).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

cpeKeepaliveTicks 1.3.6.1.4.1.3052.14.2.4.22.1.1.20
CPE ping period in 16ths of a second (nonzero overrides keepalive).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

cpePingSize 1.3.6.1.4.1.3052.14.2.4.22.1.1.21
Number of bytes in CPE ping payload
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

cpeInfoReset 1.3.6.1.4.1.3052.14.2.4.22.1.1.30
Set any number to reset CPE ping stats.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpeInfoNumReq 1.3.6.1.4.1.3052.14.2.4.22.1.1.31
Total number of requests transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpeInfoNumGoodResp 1.3.6.1.4.1.3052.14.2.4.22.1.1.32
Total number of non-corrupt responses.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpeInfoNumBadResp 1.3.6.1.4.1.3052.14.2.4.22.1.1.33
Total number of corrupt responses.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpeInfoNumLostResp 1.3.6.1.4.1.3052.14.2.4.22.1.1.34
Total number of requests with no response.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cpeInfoPercentLoss 1.3.6.1.4.1.3052.14.2.4.22.1.1.35
Percent loss (missing responses / total requests).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cpeInfoPercentBad 1.3.6.1.4.1.3052.14.2.4.22.1.1.36
Percent corrupt (corrupt responses / total requests).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

modemFormat 1.3.6.1.4.1.3052.14.2.5.1
Modem data format (8N1,7E1,7O1,7N1)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

modemInitString 1.3.6.1.4.1.3052.14.2.5.2
Init string for modem
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

modemCallAttempts 1.3.6.1.4.1.3052.14.2.5.4
Max mumber of times the modem should try to call out until successful connect
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

modemCallDelay 1.3.6.1.4.1.3052.14.2.5.5
Minimum delay (seconds) between callouts
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

modemCmdTimout 1.3.6.1.4.1.3052.14.2.5.6
Number of minutes after which an idle command session via modem is terminated
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

modemGoto 1.3.6.1.4.1.3052.14.2.5.7
When a user connects, where that user is routed (command session, passthrough to port 1, passthrough to port 2, etc.)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

modemCLIDEnable 1.3.6.1.4.1.3052.14.2.5.8.1
ON/OFF Calling Line Identification security
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

modemCLIDNumberTable 1.3.6.1.4.1.3052.14.2.5.8.2
Table of authorized callers identified by phone number
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModemCLIDNumberConfig

modemCLIDNumberEntry 1.3.6.1.4.1.3052.14.2.5.8.2.1
Entry for table of CLID numbers
Status: current Access: not-accessible
OBJECT-TYPE    
  ModemCLIDNumberConfig  

modemCLIDNumberIndex 1.3.6.1.4.1.3052.14.2.5.8.2.1.1
Index for table of CLID numbers
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..20  

modemCLIDNumber 1.3.6.1.4.1.3052.14.2.5.8.2.1.2
auhorized CLID number
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

modemTAPInitString 1.3.6.1.4.1.3052.14.2.5.9
Init string to use for TAP (pager) connections
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

modemTAP8N1 1.3.6.1.4.1.3052.14.2.5.10
ON/OFF: use 8N1 data/parity/stop for TAP connections
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

clock 1.3.6.1.4.1.3052.14.2.8.1
Text string for date and time; e.g. 'SUN 01/02/98 12:34:27'. When setting this object, only the date and time are required; the unit will ignore a specified day of week because it is calculated from the date and time. When this object is included in a notification as a varbind, it represents the time that the triggering event occurred.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

consoleDuplex 1.3.6.1.4.1.3052.14.2.10.1
ON/OFF characters echoed on telnet command session
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

consoleTimeout 1.3.6.1.4.1.3052.14.2.10.2
Minutes of inactivity after which telnet command session is terminated
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

consoleBaud 1.3.6.1.4.1.3052.14.2.10.4
Console baud rate
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

consoleFormat 1.3.6.1.4.1.3052.14.2.10.5
Console data format (8N1,7E1,7O1,7N1,8O2)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

consoleHsk 1.3.6.1.4.1.3052.14.2.10.6
Console handshaking mode
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

consoleConfirm 1.3.6.1.4.1.3052.14.2.10.7
ON/OFF Prompt to confirm certain actions
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scShowPasswordPrompt 1.3.6.1.4.1.3052.14.2.11.1.1
ON/OFF show password prompt upon login
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scConsoleLoginRequired 1.3.6.1.4.1.3052.14.2.11.1.2
ON/OFF login required upon connecting via console
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scModemLoginRequired 1.3.6.1.4.1.3052.14.2.11.1.3
ON/OFF login required upon connecting via modem
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scTelnetLoginRequired 1.3.6.1.4.1.3052.14.2.11.1.4
ON/OFF login required upon connecting via Telnet
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scTelnetPTLoginRequired 1.3.6.1.4.1.3052.14.2.11.1.5
ON/OFF login required upon connecting via Telnet to pass- through ports (TCP ports 210x)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scRTSLoginRequired 1.3.6.1.4.1.3052.14.2.11.1.6
ON/OFF login required upon connecting to RTS (TCP ports 220x)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scAuthMode 1.3.6.1.4.1.3052.14.2.11.1.7
Authentication mode (USERNAME/PW,PW/USERNAME,PASSWORD ONLY)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scRightsGroup 1.3.6.1.4.1.3052.14.2.11.1.8
The set of aliases used for the 8 available rights levels
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scSecret 1.3.6.1.4.1.3052.14.2.11.1.9
Shared secret for challenges
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserTable 1.3.6.1.4.1.3052.14.2.11.2
Table of users
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SecUserConfig

secUserEntry 1.3.6.1.4.1.3052.14.2.11.2.1
Entry for table of users
Status: current Access: not-accessible
OBJECT-TYPE    
  SecUserConfig  

secUserIndex 1.3.6.1.4.1.3052.14.2.11.2.1.1
Index for table of users
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..12  

secUserEnable 1.3.6.1.4.1.3052.14.2.11.2.1.2
ON/OFF enable user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserConnectVia 1.3.6.1.4.1.3052.14.2.11.2.1.5
Methods by which user is allowed to connect: L=local (console) T=Telnet M=modem F=FTP R=RTS S=SSH
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserLoginTo 1.3.6.1.4.1.3052.14.2.11.2.1.6
The function presented to the user upon login (COMMAND, PASSTHROUGH,MENU)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserAccessFile 1.3.6.1.4.1.3052.14.2.11.2.1.7
The default access file associated with the user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserPTEscapeTo 1.3.6.1.4.1.3052.14.2.11.2.1.9
The function presented to the user upon escaping pass- through: currently only MENU
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserPPPType 1.3.6.1.4.1.3052.14.2.11.2.1.10
The kind of PPP access allowed to this user cannot connect via PPP (NONE), can connect but only to the unit (LOCAL), or can connect and route to Ethernet (ROUTING)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserRights 1.3.6.1.4.1.3052.14.2.11.2.1.11
The rights level granted to this user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserEventsReadAccess 1.3.6.1.4.1.3052.14.2.11.2.1.13
DENY/ALLOW user to read the events/alarms file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserAuditReadAccess 1.3.6.1.4.1.3052.14.2.11.2.1.14
DENY/ALLOW user to read the audit log
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserEventsWriteAccess 1.3.6.1.4.1.3052.14.2.11.2.1.16
DENY/ALLOW user to delete the events file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserAuditWriteAccess 1.3.6.1.4.1.3052.14.2.11.2.1.17
DENY/ALLOW user to write to the audit log
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserExpiration 1.3.6.1.4.1.3052.14.2.11.2.1.18
Expiration date/time of this user
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserCallbackNumber1 1.3.6.1.4.1.3052.14.2.11.2.1.19
Number slot 1 the unit calls for dialback
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserCallbackNumber2 1.3.6.1.4.1.3052.14.2.11.2.1.20
Number slot 2 the unit calls for dialback
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserCallbackNumber3 1.3.6.1.4.1.3052.14.2.11.2.1.21
Number slot 3 the unit calls for dialback
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserChallengeTelnetMode 1.3.6.1.4.1.3052.14.2.11.2.1.22
Telnet challenge mode: when user logs in via telnet, unit allows access (OFF), presents a challenge (CHALLENGE), or unit sends a one-time-password (SEND PASSWORD) to a destination configured by secUserChallengeTelnetSendTo
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserChallengeModemMode 1.3.6.1.4.1.3052.14.2.11.2.1.23
Modem challenge mode: when user logs in via modem, unit allows access (OFF), presents a challenge (CHALLENGE), sends a one-time-password (SEND PASSWORD) to a destination configured by secUserChallengeTelnetSendTo, or dials a number (CALLBACK) configured with secUserCallbackNumberx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserChallengeConsoleMode 1.3.6.1.4.1.3052.14.2.11.2.1.24
Console challenge mode: when user logs in via console, unit allows access (OFF), or presents a challenge (CHALLENGE)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserChallengeTelnetSendTo 1.3.6.1.4.1.3052.14.2.11.2.1.25
Email action used as the destination address for one-time- password when a user logs in with a challenge mode of SEND PASSWORD
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserChallengeModemSendTo 1.3.6.1.4.1.3052.14.2.11.2.1.26
Modem action used as the destination phone number for one- time-password when a user logs in with a challenge mode of SEND PASSWORD
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

secUserChallengeExpiration 1.3.6.1.4.1.3052.14.2.11.2.1.27
Time (in minutes) after which a one-time-password is sent that it can be used to log in
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..180  

sfEnable 1.3.6.1.4.1.3052.14.2.11.3.1
ON/OFF enable factory access
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfSecret 1.3.6.1.4.1.3052.14.2.11.3.2
Secret used for factory access
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evClassNameTable 1.3.6.1.4.1.3052.14.2.12.1.1
Table of classes
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EventClassConfig

evClassNameEntry 1.3.6.1.4.1.3052.14.2.12.1.1.1
Entry for table of classes
Status: current Access: not-accessible
OBJECT-TYPE    
  EventClassConfig  

evClassNameIndex 1.3.6.1.4.1.3052.14.2.12.1.1.1.1
Index for table of classes
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..12  

evClassName 1.3.6.1.4.1.3052.14.2.12.1.1.1.2
Class name for this slot
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evReminderInterval 1.3.6.1.4.1.3052.14.2.12.1.2
Interval (minutes) between EventSensor reminder events
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

evLogEnable 1.3.6.1.4.1.3052.14.2.12.1.3.1
ON/OFF enable event log
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evLogStoreAlarm 1.3.6.1.4.1.3052.14.2.12.1.3.2
ON/OFF store data alarms in event log
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evLogMaxSize 1.3.6.1.4.1.3052.14.2.12.1.3.3
max size (in KB) of event log
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evLogStoreSensor 1.3.6.1.4.1.3052.14.2.12.1.3.4
ON/OFF store EventSensor events in event log
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evLogTimeStampAlarms 1.3.6.1.4.1.3052.14.2.12.1.3.5
ON/OFF put timestamps on event log entries
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evLogPrependName 1.3.6.1.4.1.3052.14.2.12.1.3.6
ON/OFF prepend data event name to data alarm records in event log
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evMgmtReprocess 1.3.6.1.4.1.3052.14.2.12.1.4.3
Number of sensors that have generated events since reset. Write this to reprocess each sensor's last generated event since reset. The value to write determines what kind of events should be reprocessed: 'all': all sensor events 'cc': cc events 'temperature': temperature events 'humidity': humidity events 'analog': analog input events
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdExitOnTrue 1.3.6.1.4.1.3052.14.2.12.2.1.1
ON/OFF: Data alarm evaluator stops checking record against alarm equations when it finds an equation that matches
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdFilterAction 1.3.6.1.4.1.3052.14.2.12.2.1.2
What happens to a record that matches an equation: REJECT/ACCEPT
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdWildCardChar 1.3.6.1.4.1.3052.14.2.12.2.1.3
Character (in decimal ASCII code format) used to indicate wildcards in data alarm equation
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evdTable 1.3.6.1.4.1.3052.14.2.12.2.2
Table of data events
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DataEventConfig

evdEntry 1.3.6.1.4.1.3052.14.2.12.2.2.1
Entry for table of data events
Status: current Access: not-accessible
OBJECT-TYPE    
  DataEventConfig  

evdIndex 1.3.6.1.4.1.3052.14.2.12.2.2.1.1
Index for table of data events
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..1000  

evdEnable 1.3.6.1.4.1.3052.14.2.12.2.2.1.2
ON/OFF enable this data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdName 1.3.6.1.4.1.3052.14.2.12.2.2.1.3
Name for this data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdEquation 1.3.6.1.4.1.3052.14.2.12.2.2.1.4
Equation for this data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdThreshold 1.3.6.1.4.1.3052.14.2.12.2.2.1.5
Number of equation matches that must happen to trigger this data event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evdAutoClear 1.3.6.1.4.1.3052.14.2.12.2.2.1.6
ON/OFF this data alarm is automatically cleared (re-armed) upon reaching the threshold number of matches
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdClearInterval 1.3.6.1.4.1.3052.14.2.12.2.2.1.7
Interval at which this alarm is automatically cleared (no bearing with evdAutoClear)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdClearTime 1.3.6.1.4.1.3052.14.2.12.2.2.1.8
Tie of day (HH:MM) at which this data alarm is cleared (no bearing with evdAutoClear)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdActions 1.3.6.1.4.1.3052.14.2.12.2.2.1.9
Actions for this data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdClass 1.3.6.1.4.1.3052.14.2.12.2.2.1.10
Class for this data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdTrapNum 1.3.6.1.4.1.3052.14.2.12.2.2.1.11
Trap number for this event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evdMode 1.3.6.1.4.1.3052.14.2.12.2.2.1.12
ALARM/FILTER: what is happens when this data event triggers: either generate actions (mode=ALARM) )or ACCEPT/REJECT (via evdFilterAction) the record (mode=FILTER)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdFieldTable 1.3.6.1.4.1.3052.14.2.12.2.3
Table of data event fields
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DataEventFieldConfig

evdFieldEntry 1.3.6.1.4.1.3052.14.2.12.2.3.1
Entry for table of data event fields
Status: current Access: not-accessible
OBJECT-TYPE    
  DataEventFieldConfig  

evdFieldIndex 1.3.6.1.4.1.3052.14.2.12.2.3.1.1
Index for table of data event fields
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

evdFieldStart 1.3.6.1.4.1.3052.14.2.12.2.3.1.2
Start position (1-based) for this data event field
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evdFieldLength 1.3.6.1.4.1.3052.14.2.12.2.3.1.3
Number of characters this data event field occupies
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evdFieldName 1.3.6.1.4.1.3052.14.2.12.2.3.1.4
Start position (1-based) for this data event field
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdFieldLine 1.3.6.1.4.1.3052.14.2.12.2.3.1.5
Line number (1-based, for multiline records) for this data event field
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evdFieldType 1.3.6.1.4.1.3052.14.2.12.2.3.1.6
Alpha/Numeric type for this data event field
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdMacroTable 1.3.6.1.4.1.3052.14.2.12.2.4
Table of data event macros
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DataEventMacroConfig

evdMacroEntry 1.3.6.1.4.1.3052.14.2.12.2.4.1
Entry for table of data event macros
Status: current Access: not-accessible
OBJECT-TYPE    
  DataEventMacroConfig  

evdMacroIndex 1.3.6.1.4.1.3052.14.2.12.2.4.1.1
Index for table of data event macros
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

evdMacroName 1.3.6.1.4.1.3052.14.2.12.2.4.1.2
Name of this macro for use in data event equations
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evdMacroEquation 1.3.6.1.4.1.3052.14.2.12.2.4.1.3
Equation for this data event macro
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Enable 1.3.6.1.4.1.3052.14.2.12.3.1
ON/OFF enable this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Actions 1.3.6.1.4.1.3052.14.2.12.3.2
Actions for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Message 1.3.6.1.4.1.3052.14.2.12.3.3
Message for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1TrapNum 1.3.6.1.4.1.3052.14.2.12.3.4
Trap number for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

evNoData1Class 1.3.6.1.4.1.3052.14.2.12.3.5
Class for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Sched1Begin 1.3.6.1.4.1.3052.14.2.12.3.6
Schedule 1 begin time (HH:MM) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Sched1End 1.3.6.1.4.1.3052.14.2.12.3.7
Schedule 1 end time (HH:MM) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Sched1Duration 1.3.6.1.4.1.3052.14.2.12.3.8
Duration (minutes) for schedule 1 of this no data event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

evNoData1Sched2Begin 1.3.6.1.4.1.3052.14.2.12.3.9
Schedule 2 begin time (HH:MM) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Sched2End 1.3.6.1.4.1.3052.14.2.12.3.10
Schedule 2 end time (HH:MM) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Sched2Duration 1.3.6.1.4.1.3052.14.2.12.3.11
Duration (minutes) for schedule 2 of this no data event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

evNoData1PortEnableTable 1.3.6.1.4.1.3052.14.2.12.3.12
Table of no data event 1 port enables
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NoDataEvent1PortEnableConfig

evNoData1PortEnableEntry 1.3.6.1.4.1.3052.14.2.12.3.12.1
Entry for table of no data event 1 port enables
Status: current Access: not-accessible
OBJECT-TYPE    
  NoDataEvent1PortEnableConfig  

evNoData1PortEnableIndex 1.3.6.1.4.1.3052.14.2.12.3.12.1.1
Index for table of no data event 1 port enables
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

evNoData1PortEnable 1.3.6.1.4.1.3052.14.2.12.3.12.1.2
ON/OFF: no data event 1 observes this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Exclusions 1.3.6.1.4.1.3052.14.2.12.3.13
Exclusions (space-separated MM/DD-formatted dates) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData1Days 1.3.6.1.4.1.3052.14.2.12.3.14
Days of the week on which this no event is active
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Enable 1.3.6.1.4.1.3052.14.2.12.4.1
ON/OFF enable this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Actions 1.3.6.1.4.1.3052.14.2.12.4.2
Actions for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Message 1.3.6.1.4.1.3052.14.2.12.4.3
Message for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2TrapNum 1.3.6.1.4.1.3052.14.2.12.4.4
Trap number for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 505..1199  

evNoData2Class 1.3.6.1.4.1.3052.14.2.12.4.5
Class for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Sched1Begin 1.3.6.1.4.1.3052.14.2.12.4.6
Schedule 1 begin time (HH:MM) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Sched1End 1.3.6.1.4.1.3052.14.2.12.4.7
Schedule 1 end time (HH:MM) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Sched1Duration 1.3.6.1.4.1.3052.14.2.12.4.8
Duration (minutes) for schedule 1 of this no data event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

evNoData2Sched2Begin 1.3.6.1.4.1.3052.14.2.12.4.9
Schedule 2 begin time (HH:MM) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Sched2End 1.3.6.1.4.1.3052.14.2.12.4.10
Schedule 2 end time (HH:MM) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Sched2Duration 1.3.6.1.4.1.3052.14.2.12.4.11
Duration (minutes) for schedule 2 of this no data event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

evNoData2PortEnableTable 1.3.6.1.4.1.3052.14.2.12.4.12
Table of no data event 2 port enables
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NoDataEvent2PortEnableConfig

evNoData2PortEnableEntry 1.3.6.1.4.1.3052.14.2.12.4.12.1
Entry for table of no data event 2 port enables
Status: current Access: not-accessible
OBJECT-TYPE    
  NoDataEvent2PortEnableConfig  

evNoData2PortEnableIndex 1.3.6.1.4.1.3052.14.2.12.4.12.1.1
Index for table of no data event 2 port enables
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

evNoData2PortEnable 1.3.6.1.4.1.3052.14.2.12.4.12.1.2
ON/OFF: no data event 2 observes this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Exclusions 1.3.6.1.4.1.3052.14.2.12.4.13
Exclusions (space-separated MM/DD-formatted dates) for this no data event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoData2Days 1.3.6.1.4.1.3052.14.2.12.4.14
Days of the week on which this no event is active
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Enable 1.3.6.1.4.1.3052.14.2.12.5.1
ON/OFF enable this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Actions 1.3.6.1.4.1.3052.14.2.12.5.2
Actions for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Message 1.3.6.1.4.1.3052.14.2.12.5.3
Message for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1TrapNum 1.3.6.1.4.1.3052.14.2.12.5.4
Trap number for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evSched1Class 1.3.6.1.4.1.3052.14.2.12.5.5
Class for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Sunday 1.3.6.1.4.1.3052.14.2.12.5.6
Time on Sunday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Monday 1.3.6.1.4.1.3052.14.2.12.5.7
Time on Monday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Tuesday 1.3.6.1.4.1.3052.14.2.12.5.8
Time on Tuesday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Wednesday 1.3.6.1.4.1.3052.14.2.12.5.9
Time on Wednesday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Thursday 1.3.6.1.4.1.3052.14.2.12.5.10
Time on Thursday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Friday 1.3.6.1.4.1.3052.14.2.12.5.11
Time on Friday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Saturday 1.3.6.1.4.1.3052.14.2.12.5.12
Time on Saturday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched1Exclusions 1.3.6.1.4.1.3052.14.2.12.5.13
Exclusions (space-separated MM/DD-formatted dates) for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Enable 1.3.6.1.4.1.3052.14.2.12.6.1
ON/OFF enable this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Actions 1.3.6.1.4.1.3052.14.2.12.6.2
Actions for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Message 1.3.6.1.4.1.3052.14.2.12.6.3
Message for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2TrapNum 1.3.6.1.4.1.3052.14.2.12.6.4
Trap number for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evSched2Class 1.3.6.1.4.1.3052.14.2.12.6.5
Class for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Sunday 1.3.6.1.4.1.3052.14.2.12.6.6
Time on Sunday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Monday 1.3.6.1.4.1.3052.14.2.12.6.7
Time on Monday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Tuesday 1.3.6.1.4.1.3052.14.2.12.6.8
Time on Tuesday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Wednesday 1.3.6.1.4.1.3052.14.2.12.6.9
Time on Wednesday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Thursday 1.3.6.1.4.1.3052.14.2.12.6.10
Time on Thursday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Friday 1.3.6.1.4.1.3052.14.2.12.6.11
Time on Friday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Saturday 1.3.6.1.4.1.3052.14.2.12.6.12
Time on Saturday (HH:MM) when this scheduled event triggers
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evSched2Exclusions 1.3.6.1.4.1.3052.14.2.12.6.13
Exclusions (space-separated MM/DD-formatted dates) for this scheduled event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evShskLowTable 1.3.6.1.4.1.3052.14.2.12.7
Table of serial handshaking low events
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SerialHandshakingLowEventConfig

evShskLowEntry 1.3.6.1.4.1.3052.14.2.12.7.1
Entry for table of serial handshaking low events
Status: current Access: not-accessible
OBJECT-TYPE    
  SerialHandshakingLowEventConfig  

evShskLowIndex 1.3.6.1.4.1.3052.14.2.12.7.1.1
Index for table of serial handshaking low events
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

evShskLowEnable 1.3.6.1.4.1.3052.14.2.12.7.1.2
ON/OFF: enable the serial handshaking low event for this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evShskLowActions 1.3.6.1.4.1.3052.14.2.12.7.1.3
Actions for the serial handshaking low event for this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evShskLowMessage 1.3.6.1.4.1.3052.14.2.12.7.1.4
Message for the serial handshaking low event for this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evShskLowClass 1.3.6.1.4.1.3052.14.2.12.7.1.5
Class for the serial handshaking low event for this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evShskLowTrapNum 1.3.6.1.4.1.3052.14.2.12.7.1.6
Trap number for the serial handshaking low event for this port
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evShskHighTable 1.3.6.1.4.1.3052.14.2.12.8
Table of serial handshaking high events
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SerialHandshakingHighEventConfig

evShskHighEntry 1.3.6.1.4.1.3052.14.2.12.8.1
Entry for table of serial handshaking high events
Status: current Access: not-accessible
OBJECT-TYPE    
  SerialHandshakingHighEventConfig  

evShskHighIndex 1.3.6.1.4.1.3052.14.2.12.8.1.1
Index for table of serial handshaking high events
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

evShskHighEnable 1.3.6.1.4.1.3052.14.2.12.8.1.2
ON/OFF: enable the serial handshaking high event for this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evShskHighActions 1.3.6.1.4.1.3052.14.2.12.8.1.3
Actions for the serial handshaking high event for this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evShskHighMessage 1.3.6.1.4.1.3052.14.2.12.8.1.4
Message for the serial handshaking high event for this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evShskHighClass 1.3.6.1.4.1.3052.14.2.12.8.1.5
Class for the serial handshaking high event for this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evShskHighTrapNum 1.3.6.1.4.1.3052.14.2.12.8.1.6
Trap number for the serial handshaking high event for this port
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evNoSensorTimeout 1.3.6.1.4.1.3052.14.2.12.9.1
Timeout (seconds) after which an EventSensor becomes unresponsive that this event is triggered
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evNoSensorActions 1.3.6.1.4.1.3052.14.2.12.9.2
Actions for no sensor event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evNoSensorTrapNum 1.3.6.1.4.1.3052.14.2.12.9.3
Trap number for no sensor event
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evNoSensorClass 1.3.6.1.4.1.3052.14.2.12.9.4
Class for no sensor event
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fuelSensorGeneralTable 1.3.6.1.4.1.3052.14.2.12.11.1
This table organizes general fuel sensor attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FuelSensorConfigGeneral

fsGenEntry 1.3.6.1.4.1.3052.14.2.12.11.1.1
Entry for fuel sensor general config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FuelSensorConfigGeneral  

fsGenIndex 1.3.6.1.4.1.3052.14.2.12.11.1.1.1
Which fuel sensor in the fuel sensor general config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

fsGenName 1.3.6.1.4.1.3052.14.2.12.11.1.1.2
Fuel sensor name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenSensorType 1.3.6.1.4.1.3052.14.2.12.11.1.1.3
Type of fuel sensor in use; NONE disables the fuel sensor.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenDistanceUnit 1.3.6.1.4.1.3052.14.2.12.11.1.1.4
Distance units in use when setting and indicating tank dimensions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenRawValueTop 1.3.6.1.4.1.3052.14.2.12.11.1.1.5
Analog input reading corresponding to the SENSOR FULL point.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenTopOffset 1.3.6.1.4.1.3052.14.2.12.11.1.1.6
Distance, in the specified distance unit, between the SENSOR FULL point and the TANK FULL point. The value is positive if the SENSOR FULL point is above the TANK FULL point, and negative if it is below.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenRawValueBottom 1.3.6.1.4.1.3052.14.2.12.11.1.1.7
Analog input reading corresponding to the minimum fluid height measurable by the fuel sensor.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenBottomOffset 1.3.6.1.4.1.3052.14.2.12.11.1.1.8
Distance, in the specified distance unit, between the SENSOR EMPTY point and the TANK EMPTY point. The value is positive if the SENSOR EMPTY point is above the TANK EMPTY point, and negative if it is below.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenInputES 1.3.6.1.4.1.3052.14.2.12.11.1.1.9
Which eventsensor contains the analog input associated with this fuel sensor. Allowed values are 200 (for internal ES), or 1-16.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..200  

fsGenInputPoint 1.3.6.1.4.1.3052.14.2.12.11.1.1.10
Which analog input point, on the specified eventsensor, that is associated with the fuel sensor.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

fsGenFilterAveraging 1.3.6.1.4.1.3052.14.2.12.11.1.1.11
Fuel sensor filter averaging factor.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

fsGenSysrepEnable 1.3.6.1.4.1.3052.14.2.12.11.1.1.12
Fuel sensor System Reporting enable.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenSysrepThreshold 1.3.6.1.4.1.3052.14.2.12.11.1.1.13
Fuel sensor System Reporting threshold (floating point value).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenSysrepLimit 1.3.6.1.4.1.3052.14.2.12.11.1.1.14
Fuel sensor System Reporting limit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

fsGenSysrepPackage 1.3.6.1.4.1.3052.14.2.12.11.1.1.15
Fuel sensor System Reporting package number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10  

fsGenSysrepType 1.3.6.1.4.1.3052.14.2.12.11.1.1.16
Fuel sensor ASM profile type.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsGenEnable 1.3.6.1.4.1.3052.14.2.12.11.1.1.17
Fuel sensor enable.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fuelSensorTankTable 1.3.6.1.4.1.3052.14.2.12.11.2
This table organizes tank-specific fuel sensor attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FuelSensorConfigTank

fsTankEntry 1.3.6.1.4.1.3052.14.2.12.11.2.1
Entry for fuel sensor tank config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FuelSensorConfigTank  

fsTankIndex 1.3.6.1.4.1.3052.14.2.12.11.2.1.1
Which fuel sensor in the fuel sensor tank config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

fsTankHeight 1.3.6.1.4.1.3052.14.2.12.11.2.1.2
Height of the tank, from the TANK EMPTY point to the TANK FULL point, in the specified distance unit (i.e. TANK HEIGHT). This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsTankDimA 1.3.6.1.4.1.3052.14.2.12.11.2.1.3
Tank dimension measurement A for certain tank profiles. For HORIZ OVAL, this is the length of the straight section. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsTankDimB 1.3.6.1.4.1.3052.14.2.12.11.2.1.4
Tank dimension measurement B for certain tank profiles. For HORIZ OVAL, this is the radius of the curved section. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsTankVolume 1.3.6.1.4.1.3052.14.2.12.11.2.1.5
How many volume units the tank contains, when full. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsTankVolumeUnit 1.3.6.1.4.1.3052.14.2.12.11.2.1.6
Name of the unit representing fluid volume in the tank. This is only used for display purposes; it does not affect the volume calculation.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsTankShape 1.3.6.1.4.1.3052.14.2.12.11.2.1.7
The shape of the fuel tank. A value of LINEAR produces a fluid volume reading that is directly proportional to fluid height. The HORIZ CYL and HORIZ OVAL settings use a hard-coded formula to calculate the volume. The CUSTOM setting uses a strapping table that must be configured as well (see fuelSensorCustomTankTable).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fuelSensorCustomTankTable 1.3.6.1.4.1.3052.14.2.12.11.3
This table organizes the custom tank strapping table. Each fuel sensor has a table of height/volume pairs in service only when the tank shape (fsTankShape) in CUSTOM. This allows the unit to calculate volumes for nonstandard tank shapes, to the degree that accurate height/volume measurements can be configured. This SNMP table has two indexes: the first for which fuel sensor and the second for which height/volume pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FuelSensorConfigCustomTankStrapping

fsCustomTankEntry 1.3.6.1.4.1.3052.14.2.12.11.3.1
Entry for fuel sensor custom tank config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FuelSensorConfigCustomTankStrapping  

fsCustomTankIndexFS 1.3.6.1.4.1.3052.14.2.12.11.3.1.1
Which fuel sensor in the fuel sensor tank config table. This is the first of two indexes for this SNMP table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

fsCustomTankIndexDatum 1.3.6.1.4.1.3052.14.2.12.11.3.1.2
Which hight/volume pair: there are 32 pairs per fuel sensor. This is the second of two indexes for this SNMP table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..32  

fsCustomTankHeight 1.3.6.1.4.1.3052.14.2.12.11.3.1.3
Height of custom tank height/volume pair. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsCustomTankVolume 1.3.6.1.4.1.3052.14.2.12.11.3.1.4
Volume of custom tank height/volume pair. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fuelSensorVolumeTable 1.3.6.1.4.1.3052.14.2.12.11.4
This table organizes volume-event-specific fuel sensor attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FuelSensorConfigVolume

fsVolumeEntry 1.3.6.1.4.1.3052.14.2.12.11.4.1
Entry for fuel sensor volume event config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FuelSensorConfigVolume  

fsVolumeIndex 1.3.6.1.4.1.3052.14.2.12.11.4.1.1
Which fuel sensor in the fuel sensor volume event config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

fsVolumeEnable 1.3.6.1.4.1.3052.14.2.12.11.4.1.2
Enable fuel sensor volume events.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeDeadband 1.3.6.1.4.1.3052.14.2.12.11.4.1.3
Fuel sensor deadband (hysteresis). This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeVHighValue 1.3.6.1.4.1.3052.14.2.12.11.4.1.4
Fuel sensor volume very high event threshold value. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeVHighActions 1.3.6.1.4.1.3052.14.2.12.11.4.1.5
Fuel sensor volume very high event threshold actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeVHighTrapNum 1.3.6.1.4.1.3052.14.2.12.11.4.1.6
Fuel sensor volume very high event threshold trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 519..1199  

fsVolumeVHighClass 1.3.6.1.4.1.3052.14.2.12.11.4.1.7
Fuel sensor volume very high event threshold class (severity).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeHighValue 1.3.6.1.4.1.3052.14.2.12.11.4.1.8
Fuel sensor volume high event threshold value. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeHighActions 1.3.6.1.4.1.3052.14.2.12.11.4.1.9
Fuel sensor volume high event threshold actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeHighTrapNum 1.3.6.1.4.1.3052.14.2.12.11.4.1.10
Fuel sensor volume high event threshold trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 519..1199  

fsVolumeHighClass 1.3.6.1.4.1.3052.14.2.12.11.4.1.11
Fuel sensor volume high event threshold class (severity).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeNormalActions 1.3.6.1.4.1.3052.14.2.12.11.4.1.12
Fuel sensor volume return to normal actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeNormalTrapNum 1.3.6.1.4.1.3052.14.2.12.11.4.1.13
Fuel sensor volume return to normal trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 519..1199  

fsVolumeNormalClass 1.3.6.1.4.1.3052.14.2.12.11.4.1.14
Fuel sensor volume return to normal class (severity).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeLowValue 1.3.6.1.4.1.3052.14.2.12.11.4.1.15
Fuel sensor volume low event threshold value. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeLowActions 1.3.6.1.4.1.3052.14.2.12.11.4.1.16
Fuel sensor volume low event threshold actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeLowTrapNum 1.3.6.1.4.1.3052.14.2.12.11.4.1.17
Fuel sensor volume low event threshold trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 519..1199  

fsVolumeLowClass 1.3.6.1.4.1.3052.14.2.12.11.4.1.18
Fuel sensor volume low event threshold class (severity).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeVLowValue 1.3.6.1.4.1.3052.14.2.12.11.4.1.19
Fuel sensor volume very low event threshold value. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeVLowActions 1.3.6.1.4.1.3052.14.2.12.11.4.1.20
Fuel sensor volume very low event threshold actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsVolumeVLowTrapNum 1.3.6.1.4.1.3052.14.2.12.11.4.1.21
Fuel sensor volume very low event threshold trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 519..1199  

fsVolumeVLowClass 1.3.6.1.4.1.3052.14.2.12.11.4.1.22
Fuel sensor volume very low event threshold class (severity).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fuelSensorDisconnectTable 1.3.6.1.4.1.3052.14.2.12.11.5
This table organizes disconnect-event-specific fuel sensor attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FuelSensorConfigDisconnect

fsDiscEntry 1.3.6.1.4.1.3052.14.2.12.11.5.1
Entry for fuel sensor disconnect event config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FuelSensorConfigDisconnect  

fsDiscIndex 1.3.6.1.4.1.3052.14.2.12.11.5.1.1
Which fuel sensor in the fuel sensor disconnect event config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

fsDiscEnable 1.3.6.1.4.1.3052.14.2.12.11.5.1.2
Fuel sensor disconnect event enable.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsDiscHighValue 1.3.6.1.4.1.3052.14.2.12.11.5.1.3
High end of input value range when fuel sensor is disconnected. This is in the units of the analog input value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsDiscLowValue 1.3.6.1.4.1.3052.14.2.12.11.5.1.4
Low end of input value range when fuel sensor is disconnected. This is in the units of the analog input value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsDiscActions 1.3.6.1.4.1.3052.14.2.12.11.5.1.5
Fuel sensor disconnect event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsDiscTrapNum 1.3.6.1.4.1.3052.14.2.12.11.5.1.6
Fuel sensor disconnect event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 515..1199  

fsDiscClass 1.3.6.1.4.1.3052.14.2.12.11.5.1.7
Fuel sensor disconnect event class (severity).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsDiscNormalActions 1.3.6.1.4.1.3052.14.2.12.11.5.1.8
Fuel sensor disconnect return to normal actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

fsDiscNormalTrapNum 1.3.6.1.4.1.3052.14.2.12.11.5.1.9
Fuel sensor disconnect return to normal trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 515..1199  

fsDiscNormalClass 1.3.6.1.4.1.3052.14.2.12.11.5.1.10
Fuel sensor disconnect return to normal class (severity).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmGeneralTable 1.3.6.1.4.1.3052.14.2.12.12.1
This table organizes general AC power monitor attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ACPMConfigGeneral

acpmGenEntry 1.3.6.1.4.1.3052.14.2.12.12.1.1
Entry for AC power monitor general config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ACPMConfigGeneral  

acpmGenIndex 1.3.6.1.4.1.3052.14.2.12.12.1.1.1
Which AC power monitor in the AC power monitor general config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acpmGenDevice 1.3.6.1.4.1.3052.14.2.12.12.1.1.2
Model of the AC power monitor device. The unit needs this setting to know which registers to poll for the various data items, among other things.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmGenName 1.3.6.1.4.1.3052.14.2.12.12.1.1.3
Name for the AC power monitor device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmGenAddress 1.3.6.1.4.1.3052.14.2.12.12.1.1.4
Modbus address of the AC power monitor device.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..247  

acpmGenPtRatio 1.3.6.1.4.1.3052.14.2.12.12.1.1.5
Ratio of secondary turns to primary turns on potential transformers (PT).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10000  

acpmGenCtRatio 1.3.6.1.4.1.3052.14.2.12.12.1.1.6
Ratio of secondary turns to primary turns on current transformers (CT).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10000  

acpmGenPowerType 1.3.6.1.4.1.3052.14.2.12.12.1.1.7
Type of power being monitored.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmGenSysrepPackage 1.3.6.1.4.1.3052.14.2.12.12.1.1.8
System reporting package number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10  

acpmGenSysrepType 1.3.6.1.4.1.3052.14.2.12.12.1.1.9
ASM profile type.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmGenEnable 1.3.6.1.4.1.3052.14.2.12.12.1.1.10
AC power monitor enable.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageTable 1.3.6.1.4.1.3052.14.2.12.12.2
This table organizes AC power monitor average voltage attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ACPMConfigAvgVoltage

acpmAvgVoltageEntry 1.3.6.1.4.1.3052.14.2.12.12.2.1
Entry for AC power monitor average voltage config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ACPMConfigAvgVoltage  

acpmAvgVoltageIndex 1.3.6.1.4.1.3052.14.2.12.12.2.1.1
Which AC power monitor in the AC power monitor average voltage config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acpmAvgVoltageEnable 1.3.6.1.4.1.3052.14.2.12.12.2.1.2
Enable AC power monitor average voltage events.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageDeadband 1.3.6.1.4.1.3052.14.2.12.12.2.1.3
Deadband (hysteresis) for average voltage event. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageVHighValue 1.3.6.1.4.1.3052.14.2.12.12.2.1.4
Very high event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageVHighActions 1.3.6.1.4.1.3052.14.2.12.12.2.1.5
Very high event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageVHighTrapNum 1.3.6.1.4.1.3052.14.2.12.12.2.1.6
Very high event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 520..1199  

acpmAvgVoltageVHighClass 1.3.6.1.4.1.3052.14.2.12.12.2.1.7
Very high event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageHighValue 1.3.6.1.4.1.3052.14.2.12.12.2.1.8
High event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageHighActions 1.3.6.1.4.1.3052.14.2.12.12.2.1.9
High event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageHighTrapNum 1.3.6.1.4.1.3052.14.2.12.12.2.1.10
High event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 520..1199  

acpmAvgVoltageHighClass 1.3.6.1.4.1.3052.14.2.12.12.2.1.11
High event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageNormalActions 1.3.6.1.4.1.3052.14.2.12.12.2.1.12
Return to normal actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageNormalTrapNum 1.3.6.1.4.1.3052.14.2.12.12.2.1.13
Return to normal trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 520..1199  

acpmAvgVoltageNormalClass 1.3.6.1.4.1.3052.14.2.12.12.2.1.14
Return to normal class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageLowValue 1.3.6.1.4.1.3052.14.2.12.12.2.1.15
Low event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageLowActions 1.3.6.1.4.1.3052.14.2.12.12.2.1.16
Low event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.2.1.17
Low event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 520..1199  

acpmAvgVoltageLowClass 1.3.6.1.4.1.3052.14.2.12.12.2.1.18
Low event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageVLowValue 1.3.6.1.4.1.3052.14.2.12.12.2.1.19
Very low event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageVLowActions 1.3.6.1.4.1.3052.14.2.12.12.2.1.20
Very low event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageVLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.2.1.21
Very low event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 520..1199  

acpmAvgVoltageVLowClass 1.3.6.1.4.1.3052.14.2.12.12.2.1.22
Very low event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageSysrepEnable 1.3.6.1.4.1.3052.14.2.12.12.2.1.23
System reporting enable for average voltage telemetry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageSysrepThreshold 1.3.6.1.4.1.3052.14.2.12.12.2.1.24
System reporting threshold for average voltage telemetry. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgVoltageSysrepLimit 1.3.6.1.4.1.3052.14.2.12.12.2.1.25
System reporting limit for average voltage telemetry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

acpmAvgCurrentTable 1.3.6.1.4.1.3052.14.2.12.12.3
This table organizes AC power monitor average current attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ACPMConfigAvgCurrent

acpmAvgCurrentEntry 1.3.6.1.4.1.3052.14.2.12.12.3.1
Entry for AC power monitor average current config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ACPMConfigAvgCurrent  

acpmAvgCurrentIndex 1.3.6.1.4.1.3052.14.2.12.12.3.1.1
Which AC power monitor in the AC power monitor average current config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acpmAvgCurrentEnable 1.3.6.1.4.1.3052.14.2.12.12.3.1.2
Enable AC power monitor average current events.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentDeadband 1.3.6.1.4.1.3052.14.2.12.12.3.1.3
Deadband (hysteresis) for average current event. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentVHighValue 1.3.6.1.4.1.3052.14.2.12.12.3.1.4
Very high event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentVHighActions 1.3.6.1.4.1.3052.14.2.12.12.3.1.5
Very high event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentVHighTrapNum 1.3.6.1.4.1.3052.14.2.12.12.3.1.6
Very high event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 521..1199  

acpmAvgCurrentVHighClass 1.3.6.1.4.1.3052.14.2.12.12.3.1.7
Very high event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentHighValue 1.3.6.1.4.1.3052.14.2.12.12.3.1.8
High event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentHighActions 1.3.6.1.4.1.3052.14.2.12.12.3.1.9
High event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentHighTrapNum 1.3.6.1.4.1.3052.14.2.12.12.3.1.10
High event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 521..1199  

acpmAvgCurrentHighClass 1.3.6.1.4.1.3052.14.2.12.12.3.1.11
High event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentNormalActions 1.3.6.1.4.1.3052.14.2.12.12.3.1.12
Return to normal actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentNormalTrapNum 1.3.6.1.4.1.3052.14.2.12.12.3.1.13
Return to normal trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 521..1199  

acpmAvgCurrentNormalClass 1.3.6.1.4.1.3052.14.2.12.12.3.1.14
Return to normal class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentLowValue 1.3.6.1.4.1.3052.14.2.12.12.3.1.15
Low event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentLowActions 1.3.6.1.4.1.3052.14.2.12.12.3.1.16
Low event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.3.1.17
Low event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 521..1199  

acpmAvgCurrentLowClass 1.3.6.1.4.1.3052.14.2.12.12.3.1.18
Low event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentVLowValue 1.3.6.1.4.1.3052.14.2.12.12.3.1.19
Very low event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentVLowActions 1.3.6.1.4.1.3052.14.2.12.12.3.1.20
Very low event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentVLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.3.1.21
Very low event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 521..1199  

acpmAvgCurrentVLowClass 1.3.6.1.4.1.3052.14.2.12.12.3.1.22
Very low event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentSysrepEnable 1.3.6.1.4.1.3052.14.2.12.12.3.1.23
System reporting enable for average current telemetry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentSysrepThreshold 1.3.6.1.4.1.3052.14.2.12.12.3.1.24
System reporting threshold for average current telemetry. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmAvgCurrentSysrepLimit 1.3.6.1.4.1.3052.14.2.12.12.3.1.25
System reporting limit for average current telemetry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

acpmFreqTable 1.3.6.1.4.1.3052.14.2.12.12.4
This table organizes AC power monitor frequency attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ACPMConfigFreq

acpmFreqEntry 1.3.6.1.4.1.3052.14.2.12.12.4.1
Entry for AC power monitor frequency config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ACPMConfigFreq  

acpmFreqIndex 1.3.6.1.4.1.3052.14.2.12.12.4.1.1
Which AC power monitor in the AC power monitor frequency config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acpmFreqEnable 1.3.6.1.4.1.3052.14.2.12.12.4.1.2
Enable AC power monitor frequency events.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqDeadband 1.3.6.1.4.1.3052.14.2.12.12.4.1.3
Deadband (hysteresis) for frequency event. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqVHighValue 1.3.6.1.4.1.3052.14.2.12.12.4.1.4
Very high event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqVHighActions 1.3.6.1.4.1.3052.14.2.12.12.4.1.5
Very high event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqVHighTrapNum 1.3.6.1.4.1.3052.14.2.12.12.4.1.6
Very high event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 522..1199  

acpmFreqVHighClass 1.3.6.1.4.1.3052.14.2.12.12.4.1.7
Very high event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqHighValue 1.3.6.1.4.1.3052.14.2.12.12.4.1.8
High event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqHighActions 1.3.6.1.4.1.3052.14.2.12.12.4.1.9
High event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqHighTrapNum 1.3.6.1.4.1.3052.14.2.12.12.4.1.10
High event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 522..1199  

acpmFreqHighClass 1.3.6.1.4.1.3052.14.2.12.12.4.1.11
High event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqNormalActions 1.3.6.1.4.1.3052.14.2.12.12.4.1.12
Return to normal actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqNormalTrapNum 1.3.6.1.4.1.3052.14.2.12.12.4.1.13
Return to normal trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 522..1199  

acpmFreqNormalClass 1.3.6.1.4.1.3052.14.2.12.12.4.1.14
Return to normal class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqLowValue 1.3.6.1.4.1.3052.14.2.12.12.4.1.15
Low event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqLowActions 1.3.6.1.4.1.3052.14.2.12.12.4.1.16
Low event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.4.1.17
Low event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 522..1199  

acpmFreqLowClass 1.3.6.1.4.1.3052.14.2.12.12.4.1.18
Low event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqVLowValue 1.3.6.1.4.1.3052.14.2.12.12.4.1.19
Very low event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqVLowActions 1.3.6.1.4.1.3052.14.2.12.12.4.1.20
Very low event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqVLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.4.1.21
Very low event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 522..1199  

acpmFreqVLowClass 1.3.6.1.4.1.3052.14.2.12.12.4.1.22
Very low event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqSysrepEnable 1.3.6.1.4.1.3052.14.2.12.12.4.1.23
System reporting enable for frequency telemetry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqSysrepThreshold 1.3.6.1.4.1.3052.14.2.12.12.4.1.24
System reporting threshold for frequency telemetry. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmFreqSysrepLimit 1.3.6.1.4.1.3052.14.2.12.12.4.1.25
System reporting limit for frequency telemetry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

acpmTotalRealPowerTable 1.3.6.1.4.1.3052.14.2.12.12.5
This table organizes AC power monitor total real power attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ACPMConfigTRP

acpmTRPEntry 1.3.6.1.4.1.3052.14.2.12.12.5.1
Entry for AC power monitor total real power config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ACPMConfigTRP  

acpmTRPIndex 1.3.6.1.4.1.3052.14.2.12.12.5.1.1
Which AC power monitor in the AC power monitor total real power config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acpmTRPEnable 1.3.6.1.4.1.3052.14.2.12.12.5.1.2
Enable AC power monitor total real power events.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPDeadband 1.3.6.1.4.1.3052.14.2.12.12.5.1.3
Deadband (hysteresis) for total real power event. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPVHighValue 1.3.6.1.4.1.3052.14.2.12.12.5.1.4
Very high event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPVHighActions 1.3.6.1.4.1.3052.14.2.12.12.5.1.5
Very high event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPVHighTrapNum 1.3.6.1.4.1.3052.14.2.12.12.5.1.6
Very high event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 523..1199  

acpmTRPVHighClass 1.3.6.1.4.1.3052.14.2.12.12.5.1.7
Very high event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPHighValue 1.3.6.1.4.1.3052.14.2.12.12.5.1.8
High event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPHighActions 1.3.6.1.4.1.3052.14.2.12.12.5.1.9
High event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPHighTrapNum 1.3.6.1.4.1.3052.14.2.12.12.5.1.10
High event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 523..1199  

acpmTRPHighClass 1.3.6.1.4.1.3052.14.2.12.12.5.1.11
High event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPNormalActions 1.3.6.1.4.1.3052.14.2.12.12.5.1.12
Return to normal actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPNormalTrapNum 1.3.6.1.4.1.3052.14.2.12.12.5.1.13
Return to normal trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 523..1199  

acpmTRPNormalClass 1.3.6.1.4.1.3052.14.2.12.12.5.1.14
Return to normal class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPLowValue 1.3.6.1.4.1.3052.14.2.12.12.5.1.15
Low event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPLowActions 1.3.6.1.4.1.3052.14.2.12.12.5.1.16
Low event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.5.1.17
Low event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 523..1199  

acpmTRPLowClass 1.3.6.1.4.1.3052.14.2.12.12.5.1.18
Low event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPVLowValue 1.3.6.1.4.1.3052.14.2.12.12.5.1.19
Very low event threshold. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPVLowActions 1.3.6.1.4.1.3052.14.2.12.12.5.1.20
Very low event actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPVLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.5.1.21
Very low event trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 523..1199  

acpmTRPVLowClass 1.3.6.1.4.1.3052.14.2.12.12.5.1.22
Very low event class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPSysrepEnable 1.3.6.1.4.1.3052.14.2.12.12.5.1.23
System reporting enable for total real power telemetry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPSysrepThreshold 1.3.6.1.4.1.3052.14.2.12.12.5.1.24
System reporting threshold for total real power telemetry. This is a floating point value.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTRPSysrepLimit 1.3.6.1.4.1.3052.14.2.12.12.5.1.25
System reporting limit for total real power telemetry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

acpmDisconnectTable 1.3.6.1.4.1.3052.14.2.12.12.6
This table organizes AC power monitor device disconnect event attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ACPMConfigDisconnect

acpmDisconnectEntry 1.3.6.1.4.1.3052.14.2.12.12.6.1
Entry for AC power monitor device disconnect event config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ACPMConfigDisconnect  

acpmDisconnectIndex 1.3.6.1.4.1.3052.14.2.12.12.6.1.1
Which AC power monitor in the AC power monitor device disconnect event config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acpmDisconnectEnable 1.3.6.1.4.1.3052.14.2.12.12.6.1.2
Enable AC power monitor device disconnect event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmDisconnectActions 1.3.6.1.4.1.3052.14.2.12.12.6.1.3
Actions for disconnect event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmDisconnectTrapNum 1.3.6.1.4.1.3052.14.2.12.12.6.1.4
Trap number for disconnect event.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 524..1199  

acpmDisconnectClass 1.3.6.1.4.1.3052.14.2.12.12.6.1.5
Class for disconnect event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmDisconnectNormalActions 1.3.6.1.4.1.3052.14.2.12.12.6.1.6
Actions for disconnect return to normal event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmDisconnectNormalTrapNum 1.3.6.1.4.1.3052.14.2.12.12.6.1.7
Trap number for disconnect return to normal event.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 524..1199  

acpmDisconnectNormalClass 1.3.6.1.4.1.3052.14.2.12.12.6.1.8
Class for disconnect return to normal event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTotalPowerFactorTable 1.3.6.1.4.1.3052.14.2.12.12.7
This table organizes AC power monitor device total power factor event attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ACPMConfigTotalPowerFactor

acpmTPFEntry 1.3.6.1.4.1.3052.14.2.12.12.7.1
Entry for AC power monitor device total power factor event config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ACPMConfigTotalPowerFactor  

acpmTPFIndex 1.3.6.1.4.1.3052.14.2.12.12.7.1.1
Which AC power monitor in the AC power monitor device disconnect event config table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

acpmTPFEnable 1.3.6.1.4.1.3052.14.2.12.12.7.1.2
Enable AC power monitor device disconnect event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFDeadband 1.3.6.1.4.1.3052.14.2.12.12.7.1.3
Deadband (hysteresis).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFNormalActions 1.3.6.1.4.1.3052.14.2.12.12.7.1.4
Normal actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFNormalTrapNum 1.3.6.1.4.1.3052.14.2.12.12.7.1.5
Normal trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

acpmTPFNormalClass 1.3.6.1.4.1.3052.14.2.12.12.7.1.6
Normal class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFLowValue 1.3.6.1.4.1.3052.14.2.12.12.7.1.7
Low threshold.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFLowActions 1.3.6.1.4.1.3052.14.2.12.12.7.1.8
Low actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.7.1.9
Low trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

acpmTPFLowClass 1.3.6.1.4.1.3052.14.2.12.12.7.1.10
Low class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFVLowValue 1.3.6.1.4.1.3052.14.2.12.12.7.1.11
Very Low threshold.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFVLowActions 1.3.6.1.4.1.3052.14.2.12.12.7.1.12
Very Low actions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFVLowTrapNum 1.3.6.1.4.1.3052.14.2.12.12.7.1.13
Very Low trap number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

acpmTPFVLowClass 1.3.6.1.4.1.3052.14.2.12.12.7.1.14
Very Low class.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFSysrepEnable 1.3.6.1.4.1.3052.14.2.12.12.7.1.15
System reporting enable.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFSysrepThreshold 1.3.6.1.4.1.3052.14.2.12.12.7.1.16
System reporting threshold.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acpmTPFSysrepLimit 1.3.6.1.4.1.3052.14.2.12.12.7.1.17
System reporting limit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

evResetEnable 1.3.6.1.4.1.3052.14.2.12.16.1
Enable/disable reset event. This event is triggered when the unit finishes booting.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evResetDelay 1.3.6.1.4.1.3052.14.2.12.16.2
Number of seconds to wait after unit finishes booting before triggering the reset event.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3600  

evResetActions 1.3.6.1.4.1.3052.14.2.12.16.3
Actions for reset event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evResetMessage 1.3.6.1.4.1.3052.14.2.12.16.4
Message for reset event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

evResetTrapnum 1.3.6.1.4.1.3052.14.2.12.16.5
Trap number for reset event.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 543..1199  

evResetClass 1.3.6.1.4.1.3052.14.2.12.16.6
Class (severity) for reset event.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionCallNumberTable 1.3.6.1.4.1.3052.14.2.14.1
Table of phone numbers to dial for modem actions
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ActionCallNumberConfig

actionCallNumberEntry 1.3.6.1.4.1.3052.14.2.14.1.1
Entry for table of phone numbers to dial for modem actions
Status: current Access: not-accessible
OBJECT-TYPE    
  ActionCallNumberConfig  

actionCallNumberIndex 1.3.6.1.4.1.3052.14.2.14.1.1.1
Index for table of phone numbers to dial for modem actions
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4  

actionCallNumber 1.3.6.1.4.1.3052.14.2.14.1.1.2
The number to dial for this action slot
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionPagerTable 1.3.6.1.4.1.3052.14.2.14.2
Table of pager configurations
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ActionPagerConfig

actionPagerEntry 1.3.6.1.4.1.3052.14.2.14.2.1
Entry for table of pager configurations
Status: current Access: not-accessible
OBJECT-TYPE    
  ActionPagerConfig  

actionPagerIndex 1.3.6.1.4.1.3052.14.2.14.2.1.1
index for table of pager configurations
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4  

actionPagerType 1.3.6.1.4.1.3052.14.2.14.2.1.2
type of this pager configuration
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionPagerNumber 1.3.6.1.4.1.3052.14.2.14.2.1.3
phone number to dial for this pager configuration
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionPagerID 1.3.6.1.4.1.3052.14.2.14.2.1.4
ID to use for this pager configuration
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionPagerMessage 1.3.6.1.4.1.3052.14.2.14.2.1.5
message to use for this pager configuration
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionPagerPostCalloutDelay 1.3.6.1.4.1.3052.14.2.14.2.1.6
Seconds to wait after dialing before sending ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

actionPagerPostIDDelay 1.3.6.1.4.1.3052.14.2.14.2.1.7
Seconds to wait after sending ID to send message
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

actionSchedEnable 1.3.6.1.4.1.3052.14.2.14.3.1
ON/OFF enable action schedule
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionSchedBegin 1.3.6.1.4.1.3052.14.2.14.3.2
action schedule begin time (HH:MM)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionSchedEnd 1.3.6.1.4.1.3052.14.2.14.3.3
action schedule end time (HH:MM)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionSchedWeekdaysOnly 1.3.6.1.4.1.3052.14.2.14.3.4
ON/OFF whether the action schedule applies to weekdays only (ON) or all days (OFF)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionAsentriaRequireAck 1.3.6.1.4.1.3052.14.2.14.4.1
ON/OFF Asentria action requires an ack from the receiver
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionAsentriaVersion 1.3.6.1.4.1.3052.14.2.14.4.2
version 1.0 or 1.1
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionAsentriaTCPPort 1.3.6.1.4.1.3052.14.2.14.4.3
TCP port used for TCP-based Asentria alarms
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

actionHostTable 1.3.6.1.4.1.3052.14.2.14.6
Table of network hosts to use for network-based actions
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ActionHostConfig

actionHostEntry 1.3.6.1.4.1.3052.14.2.14.6.1
Entry for table of network hosts to use for network-based actions
Status: current Access: not-accessible
OBJECT-TYPE    
  ActionHostConfig  

actionHostIndex 1.3.6.1.4.1.3052.14.2.14.6.1.1
Index for table of network hosts to use for network-based actions
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

actionHost 1.3.6.1.4.1.3052.14.2.14.6.1.2
Hostname/IP address used as destination for network-based action (e.g., trap)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionEmailTable 1.3.6.1.4.1.3052.14.2.14.7
Table of email addresses to use for email actions
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ActionEmailConfig

actionEmailEntry 1.3.6.1.4.1.3052.14.2.14.7.1
Entry for table of email addresses to use for email actions
Status: current Access: not-accessible
OBJECT-TYPE    
  ActionEmailConfig  

actionEmailIndex 1.3.6.1.4.1.3052.14.2.14.7.1.1
Index for table of email addresses to use for email actions
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

actionEmail 1.3.6.1.4.1.3052.14.2.14.7.1.2
email address
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

actionParseError 1.3.6.1.4.1.3052.14.2.14.8
When a user attempts to configure an invalid action setting/ object, this object says why it was invalid.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysTimeAutoDST 1.3.6.1.4.1.3052.14.2.16.1.1
ON/OFF automatically adjust for Daylight Savings Time
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysTimeGMTOffset 1.3.6.1.4.1.3052.14.2.16.1.2
Absolute value of offset (hours) from GMT of the timezone
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysTimeGMTDirection 1.3.6.1.4.1.3052.14.2.16.1.3
Direction (AHEAD/BEHIND) of timezone relative to GMT
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysTimeNetEnable 1.3.6.1.4.1.3052.14.2.16.1.4.1
Network time mode
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysTimeNetHostTable 1.3.6.1.4.1.3052.14.2.16.1.4.2
Table of hosts to use for network time services
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetworkTimeHostConfig

sysTimeNetHostEntry 1.3.6.1.4.1.3052.14.2.16.1.4.2.1
Entry for table of hosts to use for network time services
Status: current Access: not-accessible
OBJECT-TYPE    
  NetworkTimeHostConfig  

sysTimeNetHostIndex 1.3.6.1.4.1.3052.14.2.16.1.4.2.1.1
Index for table of hosts to use for network time services
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

sysTimeNetHost 1.3.6.1.4.1.3052.14.2.16.1.4.2.1.2
host to use for network time services
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysPTTimeout 1.3.6.1.4.1.3052.14.2.16.2.1
Timeout (minutes) of inactivity after which a pass-through session is terminated (0 means it never terminates)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysPTEndPause 1.3.6.1.4.1.3052.14.2.16.2.2
number of 16ths of a second between escape characters received on pass-through origin IO handle that are reuired for the escape characters to register as pass-through escape characters in the pass-through escape sequence. Set to 0 to make the escape character register as part of the pass- through escape sequence without requiring a pause.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysPTJoinable 1.3.6.1.4.1.3052.14.2.16.2.3
Enable joinable pass-through sessions.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysMTU 1.3.6.1.4.1.3052.14.2.16.3
Maximum transfer unit for ethernet interfaces
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysAnswerString 1.3.6.1.4.1.3052.14.2.16.4
String displayed upon login
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysEventFileID 1.3.6.1.4.1.3052.14.2.16.6
ID string for events file
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysEscapeCharacter 1.3.6.1.4.1.3052.14.2.16.7
Decimal ASCII code of the system escape character
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysTimeStampTimeFormat 1.3.6.1.4.1.3052.14.2.16.8.1
Format of time stamp: HH:MM,HH:MM:SS,BLANK
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysTimeStampDateFormat 1.3.6.1.4.1.3052.14.2.16.8.2
Format of date stamp: MM/DD,MM/DD/YY,MM/DD/YYYY,BLANK
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysTimeStampSpaceAfter 1.3.6.1.4.1.3052.14.2.16.8.3
ON/OFF Inlude a space after timestamp
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLogMode 1.3.6.1.4.1.3052.14.2.16.9.1
Syslog mode: disabled, emit UDP (REMOTE), save in a rotating file set (FILE), or emit on a listening socket (SERVER)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLoghost 1.3.6.1.4.1.3052.14.2.16.9.2
Syslog host: destination machine when syslog mode is REMOTE
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLogFilter 1.3.6.1.4.1.3052.14.2.16.9.3
String describing what functions place data in the syslog
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLogFileSize 1.3.6.1.4.1.3052.14.2.16.9.4
Size (in KB) of syslog files (when syslog mode is SERVER or FILE)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysLogFileCount 1.3.6.1.4.1.3052.14.2.16.9.5
Number of files in syslog file set (when syslog mode is SERVER or FILE)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysLogListenPort 1.3.6.1.4.1.3052.14.2.16.9.6
TCP port on which the unit listens for a connection on which syslog data is dumped (when syslog mode is SERVER)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sysCRDBCapacity 1.3.6.1.4.1.3052.14.2.16.10.1
Capacity of Call Record Database (in KB)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sysCRDBPercentFull 1.3.6.1.4.1.3052.14.2.16.10.2
Percent of the CRDB used
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sysCRDBFileIDTable 1.3.6.1.4.1.3052.14.2.16.10.3
Table of CRDB file IDs
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CRDBFileIDConfig

sysCRDBFileIDEntry 1.3.6.1.4.1.3052.14.2.16.10.3.1
Entry for table of CRDB file IDs
Status: current Access: not-accessible
OBJECT-TYPE    
  CRDBFileIDConfig  

sysCRDBFileIDIndex 1.3.6.1.4.1.3052.14.2.16.10.3.1.1
Index for table of CRDB file IDs
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

sysCRDBFileID 1.3.6.1.4.1.3052.14.2.16.10.3.1.2
ID of CRDB file for this port-associated file x
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysCRDBFileEnforceMinTable 1.3.6.1.4.1.3052.14.2.16.10.4
Table of CRDB file minimum size enforcement settings
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CRDBFileEnforceMinConfig

sysCRDBFileEnforceMinEntry 1.3.6.1.4.1.3052.14.2.16.10.4.1
Entry for table of CRDB file minimum size enforcement settings
Status: current Access: not-accessible
OBJECT-TYPE    
  CRDBFileEnforceMinConfig  

sysCRDBFileEnforceMinIndex 1.3.6.1.4.1.3052.14.2.16.10.4.1.1
Index for table of CRDB file minimum size enforcement settings
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..24  

sysCRDBFileEnforceMin 1.3.6.1.4.1.3052.14.2.16.10.4.1.2
ON/OFF: enforce minimum size for this CRDB file x
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysCharMask 1.3.6.1.4.1.3052.14.2.16.11
Character mask used for ignoring certain characters on serial ports when assembling data records (when port mode is ASCII)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sysPrompt 1.3.6.1.4.1.3052.14.2.16.12
Prompt to use in a commnand session
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysBootStatus 1.3.6.1.4.1.3052.14.2.16.13
String describing the boot status of the unit (Booted OK/ still booting
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysLocLatitude 1.3.6.1.4.1.3052.14.2.16.14.1
Latitude portion of geographic coordinates as string
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLocLongitude 1.3.6.1.4.1.3052.14.2.16.14.2
Longitude portion of geographic coordinates as string
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLocXOffset 1.3.6.1.4.1.3052.14.2.16.14.3
X-offset portion of geographic coordinates as string
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLocYOffset 1.3.6.1.4.1.3052.14.2.16.14.4
Y offset portion of geographic coordinates as string
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLocAngle 1.3.6.1.4.1.3052.14.2.16.14.5
Angle portion of geographic coordinates as string
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLocAltitude 1.3.6.1.4.1.3052.14.2.16.14.6
Altitude portion of geographic coordinates as string
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysAMManufacturer 1.3.6.1.4.1.3052.14.2.16.15.1
Device manufacturer
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysAMProduct 1.3.6.1.4.1.3052.14.2.16.15.2
Device product description (i.e., model or model number)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysAMSerialNumber 1.3.6.1.4.1.3052.14.2.16.15.3
Manufacturer serial number for device
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysAMHardwareOptions 1.3.6.1.4.1.3052.14.2.16.15.4
Hardware options currently installed on device
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysAMSoftwareVersion 1.3.6.1.4.1.3052.14.2.16.15.5
Currently-running software version on device
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysAMSiteName 1.3.6.1.4.1.3052.14.2.16.15.6
Site Name of device (user definable, also known as the siteName object under the productIds branch.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysFileTransferStatus 1.3.6.1.4.1.3052.14.2.16.17.1
Start/cancel file transfer, or check transfer status. To start, set this object to 'start'. To cancel, set this object to 'cancel'. To check status, get the object
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysFileTransferURL 1.3.6.1.4.1.3052.14.2.16.17.2
URL (describing protocol, host, directory, and file) on which file transfer function operates.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysFileTransferUsername 1.3.6.1.4.1.3052.14.2.16.17.3
Username for user account at the resource specified by sysFileTransferURL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysFileTransferPassword 1.3.6.1.4.1.3052.14.2.16.17.4
Password for user account at the resource specified by sysFileTransferURL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysUpdateStatus 1.3.6.1.4.1.3052.14.2.16.18.1
Check time/result of last update attempt.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

auditLogEnable 1.3.6.1.4.1.3052.14.2.17.1
ON/OFF enable audit log
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStoreResets 1.3.6.1.4.1.3052.14.2.17.2
ON/OFF audit log stores when the unit resets
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStoreCommands 1.3.6.1.4.1.3052.14.2.17.3
ON/OFF audit log stores commands entered in a command session
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStoreOutputs 1.3.6.1.4.1.3052.14.2.17.4
ON/OFF audit log stores output (relay output and power output) activity
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStoreAlarmActions 1.3.6.1.4.1.3052.14.2.17.5
ON/OFF audit log stores action delivery activity
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStorePwdFailures 1.3.6.1.4.1.3052.14.2.17.6
ON/OFF audit log stores when user was denied login
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStoreLogins 1.3.6.1.4.1.3052.14.2.17.7
ON/OFF audit log stores when a user was allowed login
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStoreSHSK 1.3.6.1.4.1.3052.14.2.17.8
ON/OFF audit log stores serial handshaking status (regardless of serial handshaking event)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStorePassthrough 1.3.6.1.4.1.3052.14.2.17.9
ON/OFF audit log stores pass-through activity
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStoreInactivity 1.3.6.1.4.1.3052.14.2.17.10
ON/OFF audit log stores when sessions expire due to inactivity
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogStorePolling 1.3.6.1.4.1.3052.14.2.17.11
ON/OFF audit log stores CRDB polling activity
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

auditLogMaxSize 1.3.6.1.4.1.3052.14.2.17.12
Maximum size (in KB) of audit log
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

scrGlobalEnable 1.3.6.1.4.1.3052.14.2.18.1
ON/OFF enable scripting
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrDTRCtrlPortEnableTable 1.3.6.1.4.1.3052.14.2.18.2
Table of DTR control port enables
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScriptingDTRCtrlPortEnableConfig

scrDTRCtrlPortEnableEntry 1.3.6.1.4.1.3052.14.2.18.2.1
Entry for table of DTR control port enables
Status: current Access: not-accessible
OBJECT-TYPE    
  ScriptingDTRCtrlPortEnableConfig  

scrDTRCtrlPortEnableIndex 1.3.6.1.4.1.3052.14.2.18.2.1.1
Index for table of DTR control port enables
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

scrDTRCtrlPortEnable 1.3.6.1.4.1.3052.14.2.18.2.1.2
ON/OFF enable DTR control of scripting for this port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrTable 1.3.6.1.4.1.3052.14.2.18.3
Table of scripts
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScriptingConfig

scrEntry 1.3.6.1.4.1.3052.14.2.18.3.1
Entry for table of scripts
Status: current Access: not-accessible
OBJECT-TYPE    
  ScriptingConfig  

scrIndex 1.3.6.1.4.1.3052.14.2.18.3.1.1
Index for table of scripts
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..20  

scrEnable 1.3.6.1.4.1.3052.14.2.18.3.1.2
ON/OFF enable this script
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrName 1.3.6.1.4.1.3052.14.2.18.3.1.3
Name of this script
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrFilename 1.3.6.1.4.1.3052.14.2.18.3.1.4
Filename for this script
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrRunAlways 1.3.6.1.4.1.3052.14.2.18.3.1.5
ON/OFF: this script always runs
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrRunAtStartup 1.3.6.1.4.1.3052.14.2.18.3.1.6
ON/OFF: this script runs at startup
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrRunScheduled 1.3.6.1.4.1.3052.14.2.18.3.1.7
ON/OFF: this script runs at a certain time of day
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrScheduleTime 1.3.6.1.4.1.3052.14.2.18.3.1.8
Time of day (HH:MM) this script is scheduled to run
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrArguments 1.3.6.1.4.1.3052.14.2.18.3.1.9
Arguments for this script
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrRepeatInterval 1.3.6.1.4.1.3052.14.2.18.3.1.10
How often this script runs (minutes)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

scrVolatileStringTable 1.3.6.1.4.1.3052.14.2.18.4
Table of volatile string settings for use in scripts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScriptingVolatileString

scrVolatileStringEntry 1.3.6.1.4.1.3052.14.2.18.4.1
Entry for table of volatile script string settings
Status: current Access: not-accessible
OBJECT-TYPE    
  ScriptingVolatileString  

scrVolatileStringIndex 1.3.6.1.4.1.3052.14.2.18.4.1.1
Index for table of volatile script string settings
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

scrVolatileString 1.3.6.1.4.1.3052.14.2.18.4.1.2
Volatile string for use in scripts. Use this object to cache frequently-changing string values or string values that do not need to persist through reset. This object corresponds to the scripting.vstring[] setting key branch; use those keys in scripts and you can view or change their values with this object.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrVolatileIntTable 1.3.6.1.4.1.3052.14.2.18.5
Table of volatile integer settings for use in scripts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScriptingVolatileInt

scrVolatileIntEntry 1.3.6.1.4.1.3052.14.2.18.5.1
Entry for table of volatile script integer settings
Status: current Access: not-accessible
OBJECT-TYPE    
  ScriptingVolatileInt  

scrVolatileIntIndex 1.3.6.1.4.1.3052.14.2.18.5.1.1
Index for table of volatile script integer settings
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

scrVolatileInt 1.3.6.1.4.1.3052.14.2.18.5.1.2
Volatile integer for use in scripts. Use this object to cache frequently-changing integer values or integer values that do not need to persist through reset. This object corresponds to the scripting.vint[] setting key branch; use those keys in scripts and you can view or change their values with this object.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

scrNonVolatileStringTable 1.3.6.1.4.1.3052.14.2.18.6
Table of non-volatile string settings for use in scripts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScriptingNonVolatileString

scrNonVolatileStringEntry 1.3.6.1.4.1.3052.14.2.18.6.1
Entry for table of non-volatile script string settings
Status: current Access: not-accessible
OBJECT-TYPE    
  ScriptingNonVolatileString  

scrNonVolatileStringIndex 1.3.6.1.4.1.3052.14.2.18.6.1.1
Index for table of non-volatile script string settings
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

scrNonVolatileString 1.3.6.1.4.1.3052.14.2.18.6.1.2
Non-volatile string for use in scripts. Use this object to store values that need to persist through reset. This object corresponds to the scripting.nvstring[] setting key branch; use those keys in scripts and you can view or change their values with this object. Note: to store frequently- changing integers, use the scrVolatileString object, otherwise your scripts may cause unnecessary wear of the non-volatile storage medium on the unit.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scrNonVolatileIntTable 1.3.6.1.4.1.3052.14.2.18.7
Table of non-volatile integer settings for use in scripts.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScriptingNonVolatileInt

scrNonVolatileIntEntry 1.3.6.1.4.1.3052.14.2.18.7.1
Entry for table of non-volatile script integer settings
Status: current Access: not-accessible
OBJECT-TYPE    
  ScriptingNonVolatileInt  

scrNonVolatileIntIndex 1.3.6.1.4.1.3052.14.2.18.7.1.1
Index for table of non-volatile script integer settings
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..50  

scrNonVolatileInt 1.3.6.1.4.1.3052.14.2.18.7.1.2
Non-volatile integer for use in scripts. Use this object to store integer values that need to persist through reset. This object corresponds to the scripting.nvint[] setting key branch; use those keys in scripts and you can view or change their values with this object. Note: to store frequently- changing integers, use the scrVolatileInt object, otherwise your scripts may cause unnecessary wear of the non-volatile storage medium on the unit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

siteName 1.3.6.1.4.1.3052.14.3.1
Site Name string; Max 40 characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

thisProduct 1.3.6.1.4.1.3052.14.3.2
This is a factory configured string for the product name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stockTrapString 1.3.6.1.4.1.3052.14.3.3
The message defined for the event that triggers a trap.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapEventTypeNumber 1.3.6.1.4.1.3052.14.3.4
The user-defined trap variable for the type of event that happened. Definitions: 4 Scheduled 7 Serial Handshaking Low 8 Serial Handshaking High 10 Contact Closure Active 11 Contact Closure Inactive 12 Temperature High 13 Temperature Very High 14 Temperature Low 15 Temperature Very Low 16 Temperature Return to Normal 17 Humidity High 18 Humidity Very High 19 Humidity Low 20 Humidity Very Low 21 Humidity Return to Normal 26 Analog High 27 Analog Very High 28 Analog Low 29 Analog Very Low 30 Analog Normal 40 EventSensor Unresponsive 41 Custom 42 CPE Down 44 CPE Normal 47 Power Distribution 49 Fuel Sensor Disconnect 50 Fuel Sensor Disconnect Return to Normal 52 AISG Device Alarm 53 AISG Device Alarm Return to Normal 54 AISG Device Unresponsive 55 AISG Device Unresponsive Return to Normal 56 Fuel Sensor 57 AC Power Monitor Average Voltage Very Low 58 AC Power Monitor Average Voltage Low 59 AC Power Monitor Average Voltage Return to Normal 60 AC Power Monitor Average Voltage High 61 AC Power Monitor Average Voltage Very High 62 AC Power Monitor Average Current Very Low 63 AC Power Monitor Average Current Low 64 AC Power Monitor Average Current Return to Normal 65 AC Power Monitor Average Current High 66 AC Power Monitor Average Current Very High 67 AC Power Monitor Frequency Very Low 68 AC Power Monitor Frequency Low 69 AC Power Monitor Frequency Return to Normal 70 AC Power Monitor Frequency High 71 AC Power Monitor Frequency Very High 72 AC Power Monitor Total Real Power Very Low 73 AC Power Monitor Total Real Power Low 74 AC Power Monitor Total Real Power Return to Normal 75 AC Power Monitor Total Real Power High 76 AC Power Monitor Total Real Power Very High 77 AC Power Monitor Disconnect 78 AC Power Monitor Disconnect Return to Normal 79 Load Shedding Started 80 Load Shedding Ended 81 Fuel Sensor Volume Sudden Change 82 Fuel Sensor Volume Slow Change 83 CPE Down Reminder 84 AC Power Monitor Total Power Factor Very Low 85 AC Power Monitor Total Power Factor Low 86 AC Power Monitor Total Power Factor Return to Normal 100 Contact Closure Active Reminder 101 Temperature High Reminder 102 Temperature High Very Reminder 103 Temperature Low Reminder 104 Temperature Very Low Reminder 105 Humidity High Reminder 106 Humidity Very High Reminder 107 Humidity Low Reminder 108 Humidity Very Low Reminder 109 Analog High Reminder 110 Analog Very High Reminder 111 Analog Low Reminder 112 Analog Very Low Reminder 130 Relay Output Active 131 Relay Output Inactive 132 Power Output On 133 Power Output Off 164 Reset 166 Fuel Sensor Levels Auto Adjust
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trapEventTypeName 1.3.6.1.4.1.3052.14.3.5
The user-defined trap variable for the string corresponding to the event type.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapIncludedValue 1.3.6.1.4.1.3052.14.3.6
The user-defined trap variable for the generic included value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483648..2147483647  

trapIncludedString 1.3.6.1.4.1.3052.14.3.7
The user-defined trap variable for the generic included string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapTypeString 1.3.6.1.4.1.3052.14.3.8
The cause of the trap, added for DL880 compatibility.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapEventClassNumber 1.3.6.1.4.1.3052.14.3.9
The user-defined trap variable for the configurable class number associated with the triggering event.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trapEventClassName 1.3.6.1.4.1.3052.14.3.10
The user-defined trap variable for the configurable class name associated with the class number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

keyInterface 1.3.6.1.4.1.3052.14.4
This object represents a setting key interface. When setting this object, the value to set is the 'sk' command you would enter on the command line (without the 'sk'). To get the result of the operation, read this object after you write it. For example, to configure EventSensor 1 contact closure 34 event actions to be an SNMP InformRequest to host foo, set this object to: 'event.sensor[1].cc[34].eventactions=inform(foo)'. The SNMP response is the result of the operation: if setting that key to that value was a success then the SNMP response will be a success and the response value will be what you had set. If you subsequently read this object then you will see a message 'OK: ...'. If setting that key to that value failed then the SNMP response will be a failure (a badValue response). If you subsequently read this object then the value returned is the reason that setting that key to that value failed. For another example, to read user 3's pass-through access for port 7, set this object to: 'sec.user[3].port[7].ptaccess'. The SNMP response is the result of the operation: if reading that key is a success then the SNMP response will be a success and the response value will be what you had SET (i.e., the opertion of reading a key, which is just the key itself with no '=' operator, and this is not the key value you want to read). If you subsequently read this object then the value returned is the value of the key you want to read. If reading that key failed (e.g., if the key is invalid) then the SNMP response to your SNMP set operation (the value you set being the invalid key to read) will be a failure (a badValue response). If you subsequently read this object then the value returned is the reason that reading that key failed (i.e., 'invalid key').
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

s571StockContactClosureTrap 1.3.6.1.4.1.3052.14.110
A stock contact closure trap is issued when a contact closure event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockTempTrap 1.3.6.1.4.1.3052.14.120
A stock temperature trap is issued when a temperature event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockHumidityTrap 1.3.6.1.4.1.3052.14.130
A stock humidity trap is issued when a humidity event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockAnalogTrap 1.3.6.1.4.1.3052.14.140
A stock analog trap is issued when an analog sensor event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockOutputTrap 1.3.6.1.4.1.3052.14.150
A stock output trap is issued when an output event happens. That is, depending on the configuration, when an output changes state for any reason, this trap will be sent.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockPDCurrentTrap 1.3.6.1.4.1.3052.14.180
A stock analog trap is issued when a power distribution current event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockPDVoltageTrap 1.3.6.1.4.1.3052.14.190
A stock analog trap is issued when a power distribution voltage event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockPDFuseTrap 1.3.6.1.4.1.3052.14.210
A stock analog trap is issued when a power distribution fuse event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockDataAlarmTrap 1.3.6.1.4.1.3052.14.503
The stock data alarm trap is issued when a data alarm happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockNoDataAlarmTrap 1.3.6.1.4.1.3052.14.505
The stock no-data alarm trap is issued when the unit has received no data for a configured interval within a configured schedule.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockSchedTrap 1.3.6.1.4.1.3052.14.506
The stock scheduled alarm trap is issued when the current time reaches the scheduled alarm time.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockImmediateTrap 1.3.6.1.4.1.3052.14.507
The stock immediate alarm trap is issued when the user enters the DOTRAP command.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockCTSTrap 1.3.6.1.4.1.3052.14.510
A stock CTS trap is issued when an RS-232 CTS event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571CPEDownTrap 1.3.6.1.4.1.3052.14.511
A stock CPE Down trap is issued when a CPE Down event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571FuelSensorDisconnectTrap 1.3.6.1.4.1.3052.14.515
A stock Fuel Sensor Disconnect trap is issued when a Fuel Sensor Disconnect or Connect (Return to Normal) event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571FuelSensorVolumeTrap 1.3.6.1.4.1.3052.14.519
A stock Fuel Sensor Volume trap is issued when a Fuel Sensor Volume event happens
Status: current Access: read-write
NOTIFICATION-TYPE    

s571ACPowerMonitorAvgVoltageTrap 1.3.6.1.4.1.3052.14.520
A stock AC power monitor average voltage trap is issued when an AC power monitor average voltage event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571ACPowerMonitorAvgCurrentTrap 1.3.6.1.4.1.3052.14.521
A stock AC power monitor average current trap is issued when an AC power monitor average current event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571ACPowerMonitorFrequencyTrap 1.3.6.1.4.1.3052.14.522
A stock AC power monitor frequency trap is issued when an AC power monitor frequency event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571ACPowerMonitorTRPTrap 1.3.6.1.4.1.3052.14.523
A stock AC power monitor TRP (total real power) trap is issued when an AC power monitor TRP event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571ACPowerMonitorDisconnectTrap 1.3.6.1.4.1.3052.14.524
A stock AC power monitor disconnect trap is issued when an AC power monitor disconnect event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockLoadSheddingTrap 1.3.6.1.4.1.3052.14.525
A stock Load Shedding trap is issued when a Load Shedding event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571StockScriptTrap 1.3.6.1.4.1.3052.14.526
A stock script trap is issued when a script triggers an event via a_lib.PostEvent() called with no trap number (or this trap number) specified.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571FuelSensorVolumeSuddenChangeTrap 1.3.6.1.4.1.3052.14.527
A stock Fuel Sensor Volume Sudden Change trap is issued when a Fuel Sensor Volume Sudden Change event happens
Status: current Access: read-write
NOTIFICATION-TYPE    

s571FuelSensorVolumeSlowChangeTrap 1.3.6.1.4.1.3052.14.528
A stock Fuel Sensor Volume Slow Change trap is issued when a Fuel Sensor Volume Slow Change event happens
Status: current Access: read-write
NOTIFICATION-TYPE    

s571ACTotalPowerFactorTrap 1.3.6.1.4.1.3052.14.540
A stock AC power monitor total power factor trap is issued when an AC power monitor total power factor event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571ResetTrap 1.3.6.1.4.1.3052.14.543
A stock reset trap is issued when a reset event happens.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1000 1.3.6.1.4.1.3052.14.1000
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1000.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1001 1.3.6.1.4.1.3052.14.1001
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1001.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1002 1.3.6.1.4.1.3052.14.1002
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1002.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1003 1.3.6.1.4.1.3052.14.1003
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1003.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1004 1.3.6.1.4.1.3052.14.1004
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1004.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1005 1.3.6.1.4.1.3052.14.1005
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1005.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1006 1.3.6.1.4.1.3052.14.1006
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1006.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1007 1.3.6.1.4.1.3052.14.1007
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1007.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1008 1.3.6.1.4.1.3052.14.1008
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1008.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1009 1.3.6.1.4.1.3052.14.1009
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1009.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1010 1.3.6.1.4.1.3052.14.1010
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1010.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1011 1.3.6.1.4.1.3052.14.1011
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1011.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1012 1.3.6.1.4.1.3052.14.1012
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1012.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1013 1.3.6.1.4.1.3052.14.1013
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1013.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1014 1.3.6.1.4.1.3052.14.1014
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1014.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1015 1.3.6.1.4.1.3052.14.1015
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1015.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1016 1.3.6.1.4.1.3052.14.1016
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1016.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1017 1.3.6.1.4.1.3052.14.1017
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1017.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1018 1.3.6.1.4.1.3052.14.1018
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1018.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1019 1.3.6.1.4.1.3052.14.1019
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1019.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1020 1.3.6.1.4.1.3052.14.1020
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1020.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1021 1.3.6.1.4.1.3052.14.1021
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1021.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1022 1.3.6.1.4.1.3052.14.1022
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1022.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1023 1.3.6.1.4.1.3052.14.1023
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1023.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1024 1.3.6.1.4.1.3052.14.1024
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1024.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1025 1.3.6.1.4.1.3052.14.1025
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1025.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1026 1.3.6.1.4.1.3052.14.1026
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1026.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1027 1.3.6.1.4.1.3052.14.1027
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1027.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1028 1.3.6.1.4.1.3052.14.1028
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1028.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1029 1.3.6.1.4.1.3052.14.1029
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1029.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1030 1.3.6.1.4.1.3052.14.1030
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1030.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1031 1.3.6.1.4.1.3052.14.1031
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1031.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1032 1.3.6.1.4.1.3052.14.1032
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1032.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1033 1.3.6.1.4.1.3052.14.1033
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1033.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1034 1.3.6.1.4.1.3052.14.1034
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1034.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1035 1.3.6.1.4.1.3052.14.1035
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1035.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1036 1.3.6.1.4.1.3052.14.1036
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1036.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1037 1.3.6.1.4.1.3052.14.1037
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1037.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1038 1.3.6.1.4.1.3052.14.1038
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1038.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1039 1.3.6.1.4.1.3052.14.1039
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1039.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1040 1.3.6.1.4.1.3052.14.1040
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1040.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1041 1.3.6.1.4.1.3052.14.1041
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1041.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1042 1.3.6.1.4.1.3052.14.1042
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1042.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1043 1.3.6.1.4.1.3052.14.1043
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1043.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1044 1.3.6.1.4.1.3052.14.1044
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1044.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1045 1.3.6.1.4.1.3052.14.1045
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1045.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1046 1.3.6.1.4.1.3052.14.1046
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1046.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1047 1.3.6.1.4.1.3052.14.1047
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1047.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1048 1.3.6.1.4.1.3052.14.1048
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1048.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1049 1.3.6.1.4.1.3052.14.1049
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1049.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1050 1.3.6.1.4.1.3052.14.1050
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1050.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1051 1.3.6.1.4.1.3052.14.1051
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1051.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1052 1.3.6.1.4.1.3052.14.1052
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1052.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1053 1.3.6.1.4.1.3052.14.1053
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1053.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1054 1.3.6.1.4.1.3052.14.1054
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1054.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1055 1.3.6.1.4.1.3052.14.1055
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1055.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1056 1.3.6.1.4.1.3052.14.1056
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1056.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1057 1.3.6.1.4.1.3052.14.1057
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1057.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1058 1.3.6.1.4.1.3052.14.1058
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1058.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1059 1.3.6.1.4.1.3052.14.1059
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1059.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1060 1.3.6.1.4.1.3052.14.1060
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1060.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1061 1.3.6.1.4.1.3052.14.1061
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1061.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1062 1.3.6.1.4.1.3052.14.1062
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1062.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1063 1.3.6.1.4.1.3052.14.1063
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1063.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1064 1.3.6.1.4.1.3052.14.1064
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1064.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1065 1.3.6.1.4.1.3052.14.1065
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1065.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1066 1.3.6.1.4.1.3052.14.1066
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1066.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1067 1.3.6.1.4.1.3052.14.1067
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1067.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1068 1.3.6.1.4.1.3052.14.1068
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1068.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1069 1.3.6.1.4.1.3052.14.1069
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1069.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1070 1.3.6.1.4.1.3052.14.1070
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1070.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1071 1.3.6.1.4.1.3052.14.1071
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1071.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1072 1.3.6.1.4.1.3052.14.1072
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1072.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1073 1.3.6.1.4.1.3052.14.1073
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1073.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1074 1.3.6.1.4.1.3052.14.1074
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1074.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1075 1.3.6.1.4.1.3052.14.1075
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1075.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1076 1.3.6.1.4.1.3052.14.1076
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1076.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1077 1.3.6.1.4.1.3052.14.1077
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1077.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1078 1.3.6.1.4.1.3052.14.1078
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1078.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1079 1.3.6.1.4.1.3052.14.1079
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1079.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1080 1.3.6.1.4.1.3052.14.1080
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1080.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1081 1.3.6.1.4.1.3052.14.1081
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1081.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1082 1.3.6.1.4.1.3052.14.1082
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1082.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1083 1.3.6.1.4.1.3052.14.1083
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1083.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1084 1.3.6.1.4.1.3052.14.1084
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1084.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1085 1.3.6.1.4.1.3052.14.1085
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1085.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1086 1.3.6.1.4.1.3052.14.1086
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1086.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1087 1.3.6.1.4.1.3052.14.1087
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1087.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1088 1.3.6.1.4.1.3052.14.1088
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1088.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1089 1.3.6.1.4.1.3052.14.1089
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1089.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1090 1.3.6.1.4.1.3052.14.1090
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1090.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1091 1.3.6.1.4.1.3052.14.1091
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1091.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1092 1.3.6.1.4.1.3052.14.1092
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1092.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1093 1.3.6.1.4.1.3052.14.1093
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1093.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1094 1.3.6.1.4.1.3052.14.1094
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1094.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1095 1.3.6.1.4.1.3052.14.1095
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1095.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1096 1.3.6.1.4.1.3052.14.1096
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1096.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1097 1.3.6.1.4.1.3052.14.1097
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1097.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1098 1.3.6.1.4.1.3052.14.1098
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1098.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1099 1.3.6.1.4.1.3052.14.1099
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1099.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1100 1.3.6.1.4.1.3052.14.1100
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1100.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1101 1.3.6.1.4.1.3052.14.1101
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1101.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1102 1.3.6.1.4.1.3052.14.1102
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1102.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1103 1.3.6.1.4.1.3052.14.1103
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1103.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1104 1.3.6.1.4.1.3052.14.1104
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1104.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1105 1.3.6.1.4.1.3052.14.1105
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1105.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1106 1.3.6.1.4.1.3052.14.1106
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1106.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1107 1.3.6.1.4.1.3052.14.1107
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1107.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1108 1.3.6.1.4.1.3052.14.1108
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1108.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1109 1.3.6.1.4.1.3052.14.1109
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1109.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1110 1.3.6.1.4.1.3052.14.1110
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1110.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1111 1.3.6.1.4.1.3052.14.1111
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1111.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1112 1.3.6.1.4.1.3052.14.1112
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1112.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1113 1.3.6.1.4.1.3052.14.1113
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1113.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1114 1.3.6.1.4.1.3052.14.1114
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1114.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1115 1.3.6.1.4.1.3052.14.1115
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1115.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1116 1.3.6.1.4.1.3052.14.1116
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1116.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1117 1.3.6.1.4.1.3052.14.1117
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1117.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1118 1.3.6.1.4.1.3052.14.1118
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1118.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1119 1.3.6.1.4.1.3052.14.1119
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1119.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1120 1.3.6.1.4.1.3052.14.1120
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1120.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1121 1.3.6.1.4.1.3052.14.1121
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1121.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1122 1.3.6.1.4.1.3052.14.1122
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1122.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1123 1.3.6.1.4.1.3052.14.1123
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1123.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1124 1.3.6.1.4.1.3052.14.1124
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1124.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1125 1.3.6.1.4.1.3052.14.1125
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1125.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1126 1.3.6.1.4.1.3052.14.1126
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1126.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1127 1.3.6.1.4.1.3052.14.1127
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1127.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1128 1.3.6.1.4.1.3052.14.1128
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1128.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1129 1.3.6.1.4.1.3052.14.1129
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1129.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1130 1.3.6.1.4.1.3052.14.1130
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1130.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1131 1.3.6.1.4.1.3052.14.1131
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1131.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1132 1.3.6.1.4.1.3052.14.1132
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1132.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1133 1.3.6.1.4.1.3052.14.1133
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1133.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1134 1.3.6.1.4.1.3052.14.1134
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1134.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1135 1.3.6.1.4.1.3052.14.1135
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1135.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1136 1.3.6.1.4.1.3052.14.1136
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1136.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1137 1.3.6.1.4.1.3052.14.1137
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1137.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1138 1.3.6.1.4.1.3052.14.1138
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1138.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1139 1.3.6.1.4.1.3052.14.1139
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1139.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1140 1.3.6.1.4.1.3052.14.1140
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1140.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1141 1.3.6.1.4.1.3052.14.1141
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1141.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1142 1.3.6.1.4.1.3052.14.1142
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1142.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1143 1.3.6.1.4.1.3052.14.1143
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1143.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1144 1.3.6.1.4.1.3052.14.1144
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1144.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1145 1.3.6.1.4.1.3052.14.1145
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1145.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1146 1.3.6.1.4.1.3052.14.1146
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1146.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1147 1.3.6.1.4.1.3052.14.1147
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1147.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1148 1.3.6.1.4.1.3052.14.1148
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1148.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1149 1.3.6.1.4.1.3052.14.1149
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1149.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1150 1.3.6.1.4.1.3052.14.1150
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1150.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1151 1.3.6.1.4.1.3052.14.1151
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1151.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1152 1.3.6.1.4.1.3052.14.1152
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1152.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1153 1.3.6.1.4.1.3052.14.1153
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1153.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1154 1.3.6.1.4.1.3052.14.1154
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1154.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1155 1.3.6.1.4.1.3052.14.1155
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1155.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1156 1.3.6.1.4.1.3052.14.1156
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1156.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1157 1.3.6.1.4.1.3052.14.1157
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1157.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1158 1.3.6.1.4.1.3052.14.1158
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1158.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1159 1.3.6.1.4.1.3052.14.1159
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1159.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1160 1.3.6.1.4.1.3052.14.1160
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1160.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1161 1.3.6.1.4.1.3052.14.1161
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1161.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1162 1.3.6.1.4.1.3052.14.1162
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1162.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1163 1.3.6.1.4.1.3052.14.1163
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1163.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1164 1.3.6.1.4.1.3052.14.1164
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1164.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1165 1.3.6.1.4.1.3052.14.1165
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1165.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1166 1.3.6.1.4.1.3052.14.1166
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1166.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1167 1.3.6.1.4.1.3052.14.1167
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1167.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1168 1.3.6.1.4.1.3052.14.1168
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1168.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1169 1.3.6.1.4.1.3052.14.1169
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1169.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1170 1.3.6.1.4.1.3052.14.1170
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1170.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1171 1.3.6.1.4.1.3052.14.1171
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1171.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1172 1.3.6.1.4.1.3052.14.1172
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1172.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1173 1.3.6.1.4.1.3052.14.1173
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1173.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1174 1.3.6.1.4.1.3052.14.1174
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1174.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1175 1.3.6.1.4.1.3052.14.1175
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1175.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1176 1.3.6.1.4.1.3052.14.1176
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1176.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1177 1.3.6.1.4.1.3052.14.1177
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1177.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1178 1.3.6.1.4.1.3052.14.1178
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1178.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1179 1.3.6.1.4.1.3052.14.1179
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1179.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1180 1.3.6.1.4.1.3052.14.1180
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1180.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1181 1.3.6.1.4.1.3052.14.1181
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1181.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1182 1.3.6.1.4.1.3052.14.1182
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1182.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1183 1.3.6.1.4.1.3052.14.1183
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1183.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1184 1.3.6.1.4.1.3052.14.1184
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1184.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1185 1.3.6.1.4.1.3052.14.1185
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1185.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1186 1.3.6.1.4.1.3052.14.1186
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1186.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1187 1.3.6.1.4.1.3052.14.1187
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1187.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1188 1.3.6.1.4.1.3052.14.1188
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1188.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1189 1.3.6.1.4.1.3052.14.1189
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1189.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1190 1.3.6.1.4.1.3052.14.1190
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1190.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1191 1.3.6.1.4.1.3052.14.1191
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1191.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1192 1.3.6.1.4.1.3052.14.1192
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1192.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1193 1.3.6.1.4.1.3052.14.1193
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1193.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1194 1.3.6.1.4.1.3052.14.1194
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1194.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1195 1.3.6.1.4.1.3052.14.1195
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1195.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1196 1.3.6.1.4.1.3052.14.1196
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1196.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1197 1.3.6.1.4.1.3052.14.1197
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1197.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1198 1.3.6.1.4.1.3052.14.1198
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1198.
Status: current Access: read-write
NOTIFICATION-TYPE    

s571UserTrap1199 1.3.6.1.4.1.3052.14.1199
This user-defined trap is issued when an event happens that causes a trap with specific trap type 1199.
Status: current Access: read-write
NOTIFICATION-TYPE