SL-DCM-MIB

File: SL-DCM-MIB.mib (3786 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
SNMPv2-CONF IF-MIB PerfHist-TC-MIB
SL-ENTITY-MIB SL-NE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 TimeTicks DisplayString
TruthValue TimeStamp SnmpAdminString
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
InterfaceIndex PerfCurrentCount PerfIntervalCount
PerfTotalCount CleiCode sitelight

Defined Types

DcmEntry  
SEQUENCE    
  dcmIndex InterfaceIndex
  dcmRange INTEGER
  dcmSpacing INTEGER
  dcmTemperature INTEGER
  dcmIsActive TruthValue
  dcmFiberCoefficient INTEGER
  dcmMinDispersion INTEGER
  dcmMaxDispersion INTEGER

Defined Values

slDcm 1.3.6.1.4.1.4515.1.14
This MIB module describes the DCM modules
MODULE-IDENTITY    

dcmTable 1.3.6.1.4.1.4515.1.14.1
The DCM table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DcmEntry

dcmEntry 1.3.6.1.4.1.4515.1.14.1.1
An entry in the DCM table.
Status: current Access: not-accessible
OBJECT-TYPE    
  DcmEntry  

dcmIndex 1.3.6.1.4.1.4515.1.14.1.1.1
The interface index of the DCM (Type=195; Port=216).
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

dcmRange 1.3.6.1.4.1.4515.1.14.1.1.2
The range in dispersion units (ps/nm). The object is given by the user in km units and the value is translated to dispersion units and wrotten to the DCM.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dcmSpacing 1.3.6.1.4.1.4515.1.14.1.1.3
The spacing between two adjacent optical channels in GHz units.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dcmTemperature 1.3.6.1.4.1.4515.1.14.1.1.4
This object is applicable only for active DCM modules. The temperature is encoded as a signed two's complement value in C, yielding a total range of -128C to +127C
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dcmIsActive 1.3.6.1.4.1.4515.1.14.1.1.5
Indicate if the DCM module is active. The value true if the value of the DCM range in the SEEP is 1.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dcmFiberCoefficient 1.3.6.1.4.1.4515.1.14.1.1.6
The fiber chromatic dispersion coefficient. For example the chromatic dispersion coefficient value for G.652 fiber is 17 ps/(nm km). For G.655 is 6 ps/(nm km) For G.656 is 14 ps/(nm km) The default value is 17.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dcmMinDispersion 1.3.6.1.4.1.4515.1.14.1.1.7
The minimal dispersion supported by the DCM module. Example -1350 ps/nm
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dcmMaxDispersion 1.3.6.1.4.1.4515.1.14.1.1.8
The maximal dispersion supported by the DCM module. Example -350 ps/nm
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER