SL-MAIN-MIB
File:
SL-MAIN-MIB.mib (36762 bytes)
Imported modules
Imported symbols
Defined Types
| AdminAccess |
|
| The administration access level. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
none(0), read(1), readwrite(2), provisioning(3), admin(4), trap(5) |
|
| SlmSwRevEntry |
|
| SEQUENCE |
|
|
|
| |
slmSwRevDirectory |
INTEGER |
|
| |
slmSwRevStatus |
INTEGER |
|
| |
slmSwRevName |
SoftwareRevision |
|
| |
slmSwRevDate |
DateAndTime |
|
| SlmAdminEntry |
|
| SEQUENCE |
|
|
|
| |
slmAdminLogin |
UserLogin |
|
| |
slmAdminPassword |
UserPassword |
|
| |
slmAdminRowStatus |
RowStatus |
|
| |
slmAdminAccess |
AdminAccess |
|
| |
slmSnmpv3Auth |
INTEGER |
|
| |
slmSnmpv3Priv |
INTEGER |
|
| |
slmSnmpv3Password |
UserPassword |
|
| SlmAuthEntry |
|
| SEQUENCE |
|
|
|
| |
slmAuthLogin |
UserLogin |
|
| |
slmAuthPassword |
UserPassword |
|
| |
slmAuthCommunity |
UserCommunity |
|
| SlmChPassEntry |
|
| SEQUENCE |
|
|
|
| |
slmChPassLogin |
UserLogin |
|
| |
slmChPassOldPass |
UserPassword |
|
| |
slmChPassNewPass |
UserPassword |
|
| SlmTrapDestEntry |
|
| SEQUENCE |
|
|
|
| |
slmTrapDestAddress |
Integer32 |
|
| |
slmTrapDestRowStatus |
RowStatus |
|
| |
slmTrapDestCommunity |
UserCommunity |
|
| |
slmTrapDestProtVersion |
INTEGER |
|
| |
slmTrapUserLogin |
UserLogin |
|
| |
slmTrapUserAccess |
AdminAccess |
|
| |
slmTrapEnable |
TruthValue |
|
| |
slmTrapPort |
INTEGER |
|
| |
slmTrapDestIpAddress |
IpAddress |
|
| SlmTrapLogEntry |
|
| SEQUENCE |
|
|
|
| |
slmTrapLogId |
Gauge32 |
|
| |
slmTrapLogName |
OCTET STRING |
|
| |
slmTrapLogTimeStamp |
TimeTicks |
|
| |
slmTrapLogParam1 |
OCTET STRING |
|
| |
slmTrapLogParam2 |
OCTET STRING |
|
| |
slmTrapLogParam3 |
OCTET STRING |
|
| |
slmTrapLogParam4 |
OCTET STRING |
|
| |
slmTrapLogParam5 |
OCTET STRING |
|
| |
slmTrapLogParam6 |
OCTET STRING |
|
| SlmSyslogDestEntry |
|
| SEQUENCE |
|
|
|
| |
slmSyslogDestAddress |
Integer32 |
|
| |
slmSyslogDestRowStatus |
RowStatus |
|
| |
slmSyslogLevel |
INTEGER |
|
| |
slmSyslogPort |
INTEGER |
|
| |
slmSyslogDestIpAddress |
IpAddress |
|
| SlmLicenseEntry |
|
| SEQUENCE |
|
|
|
| |
slmLicenseIndex |
INTEGER |
|
| |
slmLicenseExpiration |
INTEGER |
|
| |
slmLicenseId |
DisplayString |
|
Defined Values
| slMain |
1.3.6.1.4.1.4515.1.3 |
| This MIB module describes the Main Board |
| MODULE-IDENTITY |
|
|
|
| slmSys |
1.3.6.1.4.1.4515.1.3.1 |
| OBJECT IDENTIFIER |
|
|
|
| slmAdmin |
1.3.6.1.4.1.4515.1.3.2 |
| OBJECT IDENTIFIER |
|
|
|
| slmAuth |
1.3.6.1.4.1.4515.1.3.3 |
| OBJECT IDENTIFIER |
|
|
|
| slmLogin |
1.3.6.1.4.1.4515.1.3.4 |
| OBJECT IDENTIFIER |
|
|
|
| slmTrap |
1.3.6.1.4.1.4515.1.3.5 |
| OBJECT IDENTIFIER |
|
|
|
| slmLogFile |
1.3.6.1.4.1.4515.1.3.8 |
| OBJECT IDENTIFIER |
|
|
|
| slmChPass |
1.3.6.1.4.1.4515.1.3.12 |
| OBJECT IDENTIFIER |
|
|
|
| slmLicense |
1.3.6.1.4.1.4515.1.3.17 |
| OBJECT IDENTIFIER |
|
|
|
| slmSysSubnetMask |
1.3.6.1.4.1.4515.1.3.1.2 |
| Subnetwork Mask IP Address. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| slmSysIpAddr |
1.3.6.1.4.1.4515.1.3.1.3 |
| Node IP Address. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| slmSysAlmAct |
1.3.6.1.4.1.4515.1.3.1.4 |
| Alarm Activation Time specified in Half-Seconds units.
Alarm will be considered active only if it
has been stable for that time. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..30 |
|
| slmSysAlmDeact |
1.3.6.1.4.1.4515.1.3.1.5 |
| Alarm Clearance Time specified in Half-Seconds units.
Alarm will be considered clear only if it
has been stable for that time. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..30 |
|
| slmSysAdminStatus |
1.3.6.1.4.1.4515.1.3.1.6 |
| Instruct the system to perform the boot
according to the specified type. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), warmBoot(3), coldBoot(4), factoryBoot(5), testing(6), hotBoot(7) |
|
| slmSysOperStatus |
1.3.6.1.4.1.4515.1.3.1.7 |
| The operational system state. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| slmBoxSize |
1.3.6.1.4.1.4515.1.3.1.8 |
| The box size as was configured in the SEEP. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
half(1), full(2) |
|
| slmSysPmStartOfDay |
1.3.6.1.4.1.4515.1.3.1.10 |
| The time of day that marks the beginning of each 1-day interval
used in the performance monitoring parameters for all interfaces
in the NE. This time is on an hour boundary. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..23 |
|
| slmSysActiveSwVersion |
1.3.6.1.4.1.4515.1.3.1.11 |
| Determines the active software version. This is the version that will
be loaded by rebooted cards. It is not legal to set this object
to the id of an illegal system software version.
swRevFtpStart(3) - is set by the NMS to signal the FTP start.
swRevFtpEnd(4) - is set by the NMS to signal the FTP completion.
swRevAHot(5) - means to change the active software version to A,
and to preform hot restart to all cards.
swRevBHot(6) - means to change the active software version to B,
and to preform hot restart to all cards.
Reading the object returns the current active software version. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
swRevA(1), swRevB(2), swRevFtpStart(3), swRevFtpEnd(4), swRevAHot(5), swRevBHot(6) |
|
| slmSwRevTable |
1.3.6.1.4.1.4515.1.3.1.12 |
| This table keeps the information about the system
software revisions. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SlmSwRevEntry |
|
| slmConfigSysUptime |
1.3.6.1.4.1.4515.1.3.1.13 |
| The number of timer ticks at the last configuration command. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| slmConfigSysSignalType |
1.3.6.1.4.1.4515.1.3.1.14 |
| This variable identifies whether a SONET
or a SDH signal is used across this node.
This value is configured by the NMS. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
sonet(1), sdh(2) |
|
| slmRebootDelay |
1.3.6.1.4.1.4515.1.3.1.16 |
| The number of seconds to wait before reboot.
When this number equal to 0 the reboot should occur immediately.
After the reboot command is initiated, the value of this object
decrements accordingly.
Initially, the object value is 0.
It is also possible to change this value after starting the reboot
process.
Getting the value 0 means that there is no
pending reboot process in the background. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..300 |
|
| slmVcatDelay |
1.3.6.1.4.1.4515.1.3.1.17 |
| The value of the VCAT delay as was read from the SEEP. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmTid |
1.3.6.1.4.1.4515.1.3.1.18 |
| The SL TL1 name. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..20) |
|
| slmPsuNumber |
1.3.6.1.4.1.4515.1.3.1.19 |
| Let the NMS to configure the number of PSU in the system.
If this number mismatch the reality, a mismatch alarm is declared. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmOemType |
1.3.6.1.4.1.4515.1.3.1.20 |
| This value tells the NMS the type of the OEM.
This value is read from the SEEP. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmSysName |
1.3.6.1.4.1.4515.1.3.1.21 |
| This value is the shadow of the sysName object. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| slmSysLocation |
1.3.6.1.4.1.4515.1.3.1.22 |
| This value is the shadow of the sysLocation object. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| slmSysResetPm |
1.3.6.1.4.1.4515.1.3.1.23 |
| Writing 1 to this object reset the system PM counters. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmSysUplinkRate |
1.3.6.1.4.1.4515.1.3.1.24 |
| This object is used to configure the rate of the Uplink.
The configured rate applies to both Uplink ports. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up100(1), up1000(2) |
|
| slmSysChassisId |
1.3.6.1.4.1.4515.1.3.1.25 |
| This object is used to configure the chassis-id.
Node with the same value are considered to be stacked. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmSysNetworkPrefix |
1.3.6.1.4.1.4515.1.3.1.26 |
| This object is used to configure the Network Prefix.
The prefix is used when the IP address of the node is
assigned automatically.
The automatic IP address of the node has the form A.x.y.z
where x.y.z is the last 3 bytes of the
MAC address 00:05:fd:x:y:z of the box.
The A is the assigned Network Prefix.
For example if the A is 10 and the MAC address is
00:05:fd:f6:55:11 the automatic IP of the node shall be
10.253.85.17. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmPmAvailable |
1.3.6.1.4.1.4515.1.3.1.29 |
| This value tells the NMS if the PM support is available.
The value is taken from the SEEP and can not be changed. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| slmPortsNumber |
1.3.6.1.4.1.4515.1.3.1.30 |
| The number of ports in the system.
The value is taken from the SEEP. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmEdfaNumber |
1.3.6.1.4.1.4515.1.3.1.31 |
| The number of EDFA units in the system.
The value is taken from the SEEP. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmMuxNumber |
1.3.6.1.4.1.4515.1.3.1.32 |
| The number of MUX units in the system.
The value is taken from the SEEP. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmOpticalSwitchExist |
1.3.6.1.4.1.4515.1.3.1.33 |
| Should an Optical Switch unit exist in the system.
The value is taken from the SEEP. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| slmSysMode |
1.3.6.1.4.1.4515.1.3.1.41 |
| System Mode configuration (this object applies to muxponder). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmSysTemperature |
1.3.6.1.4.1.4515.1.3.1.43 |
| The temperature of the PL device in Celsius. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmNetworkMode |
1.3.6.1.4.1.4515.1.3.1.44 |
| 1 - means that the LAN is define on a different vlan than the MNG ports.
2 - means that the LAN is on the same vlan and the MNG ports |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
routing(1), switching(2) |
|
| slm40GConf |
1.3.6.1.4.1.4515.1.3.1.45 |
| g40(0) - No 40G ports (service ports 3..10 are disabled)
g41(1) - Single 40G Port 1 (service ports 7,8,9,10 are disabled)
g42(2) - Single 40G Port 2 (service ports 3,4,5,6 are disabled)
g43(3) - Dual 40G ports |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
g40(0), g41(1), g42(2), g43(3) |
|
| slmRstpEnabled |
1.3.6.1.4.1.4515.1.3.1.46 |
| Enable/Disable the RSTP protocol.
Defalut value is TRUE. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| slmTopologyEnabled |
1.3.6.1.4.1.4515.1.3.1.47 |
| Enable/Disable the topology discovery protocol.
Defalut value is TRUE. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| slmSysSnmpVersion |
1.3.6.1.4.1.4515.1.3.1.50 |
| The format of the sent trap:
3 - allow only SNMPv3 pdus.
4 - allow all pdus (coexistance mode). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
v3Only(3), v1v2v3(4) |
|
| slmSwRevEntry |
1.3.6.1.4.1.4515.1.3.1.12.1 |
| An entry exist per system revsion type (A or B). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SlmSwRevEntry |
|
|
| slmSwRevDirectory |
1.3.6.1.4.1.4515.1.3.1.12.1.1 |
| The directory name A or B of this system software
revision. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
swRevDirA(1), swRevDirB(2) |
|
| slmSwRevStatus |
1.3.6.1.4.1.4515.1.3.1.12.1.2 |
| The status of the system software directory content.
The value valid(1) means that the data of this entry is
valid and that the software is loaded correctly and is
currently used.
The value copyingToStandby(3) means that the SW is currently
being copied to the Standby Switch. During this period
the NMS is not allowed to upgrade the SW version. This value
is applicable only to the Standby software version.
The value invalid(2) means otherwise. This value is applicable
only to the Standby software version. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
valid(1), invalid(2), copyingToStandby(3) |
|
| slmSwRevName |
1.3.6.1.4.1.4515.1.3.1.12.1.3 |
| The identification string of the system software revision.
This value is taken from the content of the system software
configuration data that is downloded with the rest of the
software files. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
SoftwareRevision |
|
|
| slmSwRevDate |
1.3.6.1.4.1.4515.1.3.1.12.1.4 |
| The release date of the system software revision.
This value is taken from the content of the system software
configuration data that is downloded with the rest of the
software files. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DateAndTime |
|
|
| slmAdminTable |
1.3.6.1.4.1.4515.1.3.2.1 |
| The admin table is used to supply the access
level for the user login. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SlmAdminEntry |
|
| slmAdminEntry |
1.3.6.1.4.1.4515.1.3.2.1.1 |
| An entry exist per user. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SlmAdminEntry |
|
|
| slmAdminLogin |
1.3.6.1.4.1.4515.1.3.2.1.1.3 |
| The user login. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
UserLogin |
|
|
| slmAdminRowStatus |
1.3.6.1.4.1.4515.1.3.2.1.1.5 |
| This object is used to create and delete rows in the
slmAdminTable. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| slmAdminAccess |
1.3.6.1.4.1.4515.1.3.2.1.1.6 |
| The user access level. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
AdminAccess |
|
|
| slmSnmpv3Auth |
1.3.6.1.4.1.4515.1.3.2.1.1.7 |
| The user SNMP v3 authentication mode. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
noaccess(1), noauth(2), md5(3), sha(4) |
|
| slmSnmpv3Priv |
1.3.6.1.4.1.4515.1.3.2.1.1.8 |
| The user SNMP v3 privacy mode. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
noaccess(1), nopriv(2), des(3), aes(4) |
|
| slmAuthTable |
1.3.6.1.4.1.4515.1.3.3.1 |
| The authentication table is used
for creating authentication requests. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SlmAuthEntry |
|
| slmAuthEntry |
1.3.6.1.4.1.4515.1.3.3.1.1 |
| The entry is used to compute the slmAuthCommunity based
on the indexes Login and Password. Note that the table contains
no data, and when using GetNext it apears to be empty.
To compute the community the NMS should Get the field
slmAuthCommunity with the corresponding indexes. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SlmAuthEntry |
|
|
| slmAuthLogin |
1.3.6.1.4.1.4515.1.3.3.1.1.1 |
| The user login. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UserLogin |
|
|
| slmChPassTable |
1.3.6.1.4.1.4515.1.3.12.1 |
| The table is used for changing the user passowrd. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SlmChPassEntry |
|
| slmChPassEntry |
1.3.6.1.4.1.4515.1.3.12.1.1 |
| The entry is used to set the slmChPassNewPass.
Note that the table contains no data, and when
using GetNext it apears to be empty.
To change the password, the NMS should issue a SET
command with the new password while the two indexes
equal to the old user login and password. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SlmChPassEntry |
|
|
| slmChPassLogin |
1.3.6.1.4.1.4515.1.3.12.1.1.1 |
| The user login. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UserLogin |
|
|
| slmTrapDestEntry |
1.3.6.1.4.1.4515.1.3.5.1.1 |
| This entry includes a destination IP address to which to send
traps for this community. An entry in the table is created by
the NMS.
In order to keep the entry in the table the management should
refresh the entry periodicaly. Otherwise it will be deleted
by the GNE after 5 minutes. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SlmTrapDestEntry |
|
|
| slmTrapDestAddress |
1.3.6.1.4.1.4515.1.3.5.1.1.1 |
| A copy of slmTrapDestIpAddress represented as an integer.
Needed due to VxWorks failure to handle an ip address as a table index. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| slmTrapDestRowStatus |
1.3.6.1.4.1.4515.1.3.5.1.1.2 |
| This object is used to create and delete rows in the
trapDestTable. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| slmTrapDestProtVersion |
1.3.6.1.4.1.4515.1.3.5.1.1.4 |
| The SNMP version of the traps which this manager expects to receive. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
snmpVer1(1), snmpVer2(2), snmpVer3(3) |
|
| slmTrapUserLogin |
1.3.6.1.4.1.4515.1.3.5.1.1.5 |
| The user login. This is used to describe to the manager
the current active login sessions. The NMS should read
this value periodicaly in order to refresh its entry, otherwise
the entry will be deleted by the GNE after a timeout of 5 minutes. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
UserLogin |
|
|
| slmTrapEnable |
1.3.6.1.4.1.4515.1.3.5.1.1.7 |
| TRUE - means that that the alarms are allowed.
FALSE - means that all alarms should not be sent for this session. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| slmTrapPort |
1.3.6.1.4.1.4515.1.3.5.1.1.8 |
| The destination port for to send the trap.
The default value is 162. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmTrapDestIpAddress |
1.3.6.1.4.1.4515.1.3.5.1.1.9 |
| The address to send traps on behalf of this entry.
This object may not be modified if the associated
slmTrapDestStatus object is equal to active(1). |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| slmTrapLogEntry |
1.3.6.1.4.1.4515.1.3.5.2.1 |
| An entry in the table keeps the log of a single trap. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SlmTrapLogEntry |
|
|
| slmTrapLogId |
1.3.6.1.4.1.4515.1.3.5.2.1.1 |
| The trap log id. The id increments each time a new log
entry arrives. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| slmTrapLogName |
1.3.6.1.4.1.4515.1.3.5.2.1.2 |
| The object id of the trap. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..80) |
|
| slmTrapLogParam1 |
1.3.6.1.4.1.4515.1.3.5.2.1.4 |
| The first parameter of the trap. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..80) |
|
| slmTrapLogParam2 |
1.3.6.1.4.1.4515.1.3.5.2.1.5 |
| The second parameter of the trap. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..80) |
|
| slmTrapLogParam3 |
1.3.6.1.4.1.4515.1.3.5.2.1.6 |
| The third parameter of the trap. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..80) |
|
| slmTrapLogParam4 |
1.3.6.1.4.1.4515.1.3.5.2.1.7 |
| The forth parameter of the trap. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..80) |
|
| slmTrapLogParam5 |
1.3.6.1.4.1.4515.1.3.5.2.1.8 |
| The fifth parameter of the trap. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..80) |
|
| slmTrapLogParam6 |
1.3.6.1.4.1.4515.1.3.5.2.1.9 |
| The sixth parameter of the trap. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..80) |
|
| slmTrapSoftwareStatusChange |
1.3.6.1.4.1.4515.1.3.5.4 |
| A slmTrapSoftwareStatusChange trap is sent when the
value of the slmSwRevStatus of one of the directories changes. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| slmTrapSysNameChange |
1.3.6.1.4.1.4515.1.3.5.5 |
| A slmTrapSysNameChange trap is sent when the
value of the slmSysName is changed. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| slmTrapSysLocationChange |
1.3.6.1.4.1.4515.1.3.5.6 |
| A slmTrapSysLocationChange trap is sent when the
value of the slmSysLocation is changed. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| slmSyslogDestEntry |
1.3.6.1.4.1.4515.1.3.5.7.1 |
| This entry includes a destination IP addresses to which to send
log messages. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SlmSyslogDestEntry |
|
|
| slmSyslogDestAddress |
1.3.6.1.4.1.4515.1.3.5.7.1.1 |
| A copy of slmSyslogDestTable represented as an integer.
Needed due to VxWorks failure to handle an ip address as a table index. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| slmSyslogDestRowStatus |
1.3.6.1.4.1.4515.1.3.5.7.1.2 |
| This object is used to create and delete rows in the slmSyslogDestTable. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| slmSyslogLevel |
1.3.6.1.4.1.4515.1.3.5.7.1.3 |
| The level of log messages which this manager expects to receive. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
traps(1), log(2), debug(3) |
|
| slmSyslogPort |
1.3.6.1.4.1.4515.1.3.5.7.1.4 |
| The destination port for to send the log message.
The default value is 514. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmSyslogDestIpAddress |
1.3.6.1.4.1.4515.1.3.5.7.1.5 |
| The address to send log messages on behalf of this entry. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| slmLicenseEntry |
1.3.6.1.4.1.4515.1.3.17.1.1 |
| An entry in the table correspond to installed license. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SlmLicenseEntry |
|
|
| slmLicenseIndex |
1.3.6.1.4.1.4515.1.3.17.1.1.1 |
| The license index. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmLicenseExpiration |
1.3.6.1.4.1.4515.1.3.17.1.1.2 |
| The number of seconds to expiration.
Value -1 for permanent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| slmLicenseId |
1.3.6.1.4.1.4515.1.3.17.1.1.3 |
| The license text |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..80) |
|