SLE-NETWORK-MIB

File: SLE-NETWORK-MIB.mib (136595 bytes)

Imported modules

DASAN-SMI IANAifType-MIB IF-MIB
INET-ADDRESS-MIB SLE-TC-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

sleMgmt IANAtunnelType InterfaceIndex
InetAddress InetAddressType SleControlStatusType
SleControlRequestResultType OBJECT-GROUP NOTIFICATION-GROUP
TimeTicks IpAddress Integer32
Unsigned32 Gauge32 Counter64
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
MacAddress

Defined Types

SleNetIfEntry  
SEQUENCE    
  sleNetIfIndex Integer32
  sleNetIfName OCTET STRING
  sleNetIfDescription OCTET STRING
  sleNetIfTableIndex InterfaceIndex
  sleNetIfRegState INTEGER
  sleNetIfAdminState INTEGER
  sleNetIfOperState INTEGER
  sleNetIfMulticast INTEGER
  sleNetIfMtu INTEGER
  sleNetIfIpSetMode INTEGER
  sleNetIfIpMartianFilter INTEGER
  sleNetIfUpCnt Integer32
  sleNetIfDownCnt Integer32
  sleNetIfLinkUpTime Counter64
  sleNetIfElapsedTimeAfterClearStats Counter64
  sleNetIfBindingVRFName OCTET STRING
  sleNetIfOnFailUseVRF INTEGER
  sleNetIfIpUnreachability INTEGER
  sleNetIfipRedirects INTEGER
  sleNetIfIpForwarding INTEGER
  sleNetIfAlias OCTET STRING
  sleNetIfIpArpAlias INTEGER
  sleNetIfIpArpAliasMac MacAddress
  sleNetIfArpMCProbeCount Integer32
  sleNetIfArpUCProbeCount Integer32
  sleNetIfArpRetransTime Integer32
  sleNetIfIpProxyArp INTEGER
  sleNetIfIpRPFilter INTEGER
  sleNetIfRPFilter INTEGER
  sleNetIfRouteMap OCTET STRING

SleIpAddrEntry  
SEQUENCE    
  sleIpAddrValue IpAddress
  sleIpAddrMask Integer32
  sleIpAddrBcast IpAddress
  sleIpAddrFlag BITS
  sleIpAddrScope INTEGER
  sleIpAddrIpIndex INTEGER
  sleIpAddrUnnumUsedIp INTEGER

SleArpEntry  
SEQUENCE    
  sleArpIpAddress IpAddress
  sleArpPhyAddress MacAddress
  sleArpPortIndex Integer32
  sleArpState INTEGER
  sleArpHwType INTEGER
  sleArpHwUsed INTEGER
  sleArpUsedTime INTEGER

SleRouteEntry  
SEQUENCE    
  sleRouteDstAddress IpAddress
  sleRouteDstMask INTEGER
  sleRouteGateway IpAddress
  sleRouteInterface INTEGER
  sleRouteType INTEGER
  sleRouteProto INTEGER
  sleRouteMetric INTEGER
  sleRouteActive INTEGER
  sleRouteBindingSrcAddr IpAddress
  sleRouteDistance INTEGER
  sleRouteSubtype INTEGER
  sleRouteNexthopStatus BITS
  sleRouteRibStatus BITS
  sleRouteVRFIndex Integer32

SleDhcpClEntry  
SEQUENCE    
  sleDhcpClMode INTEGER
  sleDhcpClIpAddr IpAddress
  sleDhcpClNetmask IpAddress
  sleDhcpClGateway IpAddress
  sleDhcpClDnsServer IpAddress
  sleDhcpClServer IpAddress
  sleDhcpClClientId OCTET STRING
  sleDhcpClClientIdStyle INTEGER
  sleDhcpClClassId OCTET STRING
  sleDhcpClClassIdStyle INTEGER
  sleDhcpClLeasetime Integer32
  sleDhcpClState INTEGER

SleTunnelIfEntry  
SEQUENCE    
  sleTunnelIfIndex Integer32
  sleTunnelIfLocalAddress IpAddress
  sleTunnelIfRemoteAddress IpAddress
  sleTunnelIfMode IANAtunnelType
  sleTunnelIfTTL Integer32
  sleTunnelIfDscpMode INTEGER
  sleTunnelIfDscp Integer32
  sleTunnelIfKeepaliveInterval Integer32
  sleTunnelIfKeepaliveRetry Integer32
  sleTunnelIfPathMtuDiscovery INTEGER
  sleTunnelIfVRFName OCTET STRING
  sleTunnelIfBindingPorts OCTET STRING
  sleTunnelIfLocalAddress6 InetAddress
  sleTunnelIfRemoteAddress6 InetAddress
  sleTunnelIfChecksum INTEGER
  sleTunnelIfDmac MacAddress
  sleTunnelIfTos INTEGER

SleTunnelAddressEntry  
SEQUENCE    
  sleTunnelAddressValue IpAddress
  sleTunnelAddressMask Integer32
  sleTunnelIpAddrBcast IpAddress
  sleTunnelAddressFlag BITS
  sleTunnelAddressScope Integer32
  sleTunnelAddressUnnumIfIndex INTEGER
  sleTunnelAddressUnnumIpIndex INTEGER

SleIpVRFEntry  
SEQUENCE    
  sleIpVRFIndex Integer32
  sleIpVRFName OCTET STRING
  sleIpVRFDesignatedPorts OCTET STRING
  sleIpVRFRouterId IpAddress
  sleIpVRFDescription OCTET STRING

SleIpVRFSelectionSourceEntry  
SEQUENCE    
  sleIpVRFSelectionSrcIndex INTEGER
  sleIpVRFSelectionSrcAddr IpAddress
  sleIpVRFSelectionSrcMask Integer32
  sleIpVRFSelectionSrcVRFName OCTET STRING

SleBFDInterfaceEntry  
SEQUENCE    
  sleBFDIfRxInterval INTEGER
  sleBFDIfTxInterval INTEGER
  sleBFDIfDetectMulti INTEGER
  sleBFDIfRxIntervalIPv6 Integer32
  sleBFDIfTxIntervalIJPv6 Integer32
  sleBFDIfDetectMultiIPv6 Integer32

SleBFDSessionInfoEntry  
SEQUENCE    
  sleBFDSessionNeighAddrType InetAddressType
  sleBFDSessionNeighAddrValue InetAddress
  sleBFDSessionRegProtocols BITS
  sleBFDSessionLocalDiscr Unsigned32
  sleBFDSessionRemoteDiscr Unsigned32
  sleBFDSessionDetecMultiplier INTEGER
  sleBFDSessionStatus INTEGER
  sleBFDSessionEchoUsage INTEGER
  sleBFDSessionUptime TimeTicks

SleBFDSessionStatsEntry  
SEQUENCE    
  sleBFDSessionStatsHolddownTime Unsigned32
  sleBFDSessionStatsHolddownExpires Unsigned32
  sleBFDSessionStatsHolddownHitCount Unsigned32
  sleBFDSessionStatsHelloTime Unsigned32
  sleBFDSessionStatsHelloHitCount Unsigned32
  sleBFDSessionStatsRxCount Unsigned32
  sleBFDSessionStatsRxAvgInterval Unsigned32
  sleBFDSessionStatsRxMinInterval Unsigned32
  sleBFDSessionStatsRxMaxInterval Unsigned32
  sleBFDSessionStatsTxCount Unsigned32
  sleBFDSessionStatsTxAvgInterval Unsigned32
  sleBFDSessionStatsTxMinInterval Unsigned32
  sleBFDSessionStatsTxMaxInterval Unsigned32
  sleBFDSessionStatsEchoRxCount Unsigned32
  sleBFDSessionStatsEchoRxAvgInterval Unsigned32
  sleBFDSessionStatsEchoRxMinInterval Unsigned32
  sleBFDSessionStatsEchoRxMaxInterval Unsigned32
  sleBFDSessionStatsEchoTxCount Unsigned32
  sleBFDSessionStatsEchoTxAvgInterval Unsigned32
  sleBFDSessionStatsEchoTxMinInterva Unsigned32
  sleBFDSessionStatsEchoTxMaxInterval Unsigned32

SleBFDSessionLocalEntry  
SEQUENCE    
  sleBFDSessionLocalDiag INTEGER
  sleBFDSessionLocalState INTEGER
  sleBFDSessionLocalFlags BITS
  sleBFDSessionLocalMultiplier INTEGER
  sleBFDSessionLocalMinTxInterval Unsigned32
  sleBFDSessionLocalMinRxInterval Unsigned32
  sleBFDSessionLocalMinEchoInterval Unsigned32

SleBFDSessionRemoteEntry  
SEQUENCE    
  sleBFDSessionRemoteDiag INTEGER
  sleBFDSessionRemoteState INTEGER
  sleBFDSessionremoteFlags BITS
  sleBFDSessionRemoteMultiplier INTEGER
  sleBFDSessionRemoteMinTxInterval Unsigned32
  sleBFDSessionRemoteMinRxInterval Unsigned32
  sleBFDSessionRemoteMinEchoInterval Unsigned32

SleBFDStaticGwEntry  
SEQUENCE    
  sleBFDStaticGwAddrType InetAddressType
  sleBFDStaticGwAddr InetAddress

Defined Values

sleNetwork 1.3.6.1.4.1.6296.101.11
This MIB contains all needed informations about DHCP and all supported sle DHCP features.
MODULE-IDENTITY    

sleNetInterface 1.3.6.1.4.1.6296.101.11.1
OBJECT IDENTIFIER    

sleNetIfTable 1.3.6.1.4.1.6296.101.11.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleNetIfEntry

sleNetIfEntry 1.3.6.1.4.1.6296.101.11.1.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleNetIfEntry  

sleNetIfIndex 1.3.6.1.4.1.6296.101.11.1.1.1.1
Network interface index 0 : any(all) 1..4094 : VLAN 4095 : management 4096 : loopback 4097 : NULL device 10000..11023: Tunnel interface index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..11023  

sleNetIfName 1.3.6.1.4.1.6296.101.11.1.1.1.2
Device Name of this Interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

sleNetIfDescription 1.3.6.1.4.1.6296.101.11.1.1.1.3
Description of this interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

sleNetIfTableIndex 1.3.6.1.4.1.6296.101.11.1.1.1.4
Same as ifIndex (for appropriated ifTable entries).
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

sleNetIfRegState 1.3.6.1.4.1.6296.101.11.1.1.1.5
Registered state of Network device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unregistered(0), registered(1)  

sleNetIfAdminState 1.3.6.1.4.1.6296.101.11.1.1.1.6
Administrative state. down - shutdown up - noshutdown
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), up(1)  

sleNetIfOperState 1.3.6.1.4.1.6296.101.11.1.1.1.7
Operational state. down - shutdown or not running up - running
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), up(1)  

sleNetIfMulticast 1.3.6.1.4.1.6296.101.11.1.1.1.8
Multicast enable/disable state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfMtu 1.3.6.1.4.1.6296.101.11.1.1.1.9
Maximum Transmission Unit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 64..17940  

sleNetIfIpSetMode 1.3.6.1.4.1.6296.101.11.1.1.1.10
IP address setting mode. 0 : static 1 : dynamic (by DHCP client)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

sleNetIfIpMartianFilter 1.3.6.1.4.1.6296.101.11.1.1.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfUpCnt 1.3.6.1.4.1.6296.101.11.1.1.1.12
The times of link-up event.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleNetIfDownCnt 1.3.6.1.4.1.6296.101.11.1.1.1.13
The times of link-down event.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleNetIfLinkUpTime 1.3.6.1.4.1.6296.101.11.1.1.1.14
The elapsed time after link is up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleNetIfElapsedTimeAfterClearStats 1.3.6.1.4.1.6296.101.11.1.1.1.15
The elapsed time after clearing status.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleNetIfBindingVRFName 1.3.6.1.4.1.6296.101.11.1.1.1.16
VRF name that this tunnel interface is binding.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleNetIfOnFailUseVRF 1.3.6.1.4.1.6296.101.11.1.1.1.17
Lookup into a global routing table when the VRF routing table lookup was failed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleNetIfIpUnreachability 1.3.6.1.4.1.6296.101.11.1.1.1.18
IP unreachability ON/OFF
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleNetIfipRedirects 1.3.6.1.4.1.6296.101.11.1.1.1.19
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleNetIfIpForwarding 1.3.6.1.4.1.6296.101.11.1.1.1.20
The IP forwarding status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfAlias 1.3.6.1.4.1.6296.101.11.1.1.1.21
lias Name for the Interface
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleNetIfIpArpAlias 1.3.6.1.4.1.6296.101.11.1.1.1.22
IP Arp Alias state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfIpArpAliasMac 1.3.6.1.4.1.6296.101.11.1.1.1.23
IP Arp Alias MAC
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sleNetIfArpMCProbeCount 1.3.6.1.4.1.6296.101.11.1.1.1.24
ARP request Multicast probe count
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 2..10  

sleNetIfArpUCProbeCount 1.3.6.1.4.1.6296.101.11.1.1.1.25
ARP request Unicast probe count
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 2..10  

sleNetIfArpRetransTime 1.3.6.1.4.1.6296.101.11.1.1.1.26
Retrans time of ARP request (unit: 1s)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..300  

sleNetIfIpProxyArp 1.3.6.1.4.1.6296.101.11.1.1.1.27
IP Proxy Arp state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfIpRPFilter 1.3.6.1.4.1.6296.101.11.1.1.1.28
IP Reverse Path Filtering of CPU
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), loose(1), strict(2)  

sleNetIfRPFilter 1.3.6.1.4.1.6296.101.11.1.1.1.29
Reverse Path Filtering of CHIP (default : looseAllow)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), loose(1), strict(2), looseAllow(3)  

sleNetIfRouteMap 1.3.6.1.4.1.6296.101.11.1.1.1.30
IP Policy route-map name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleNetIfControl 1.3.6.1.4.1.6296.101.11.1.2
OBJECT IDENTIFIER    

sleNetIfControlRequest 1.3.6.1.4.1.6296.101.11.1.2.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setNetIfRegState(1), setNetIfProfile(2), setNetIfIpMartianFilter(3), setNetIfBindingVRF(4), unsetNetIfBindingVRF(5), setNetIfOnFailUseVRF(6), setNetIfIpUnreachability(7), setNetIfIpRedirects(8), setNetIfIpForwarding(9), setAlias(10), setIpArpAlias(11), setArpMCProbeCount(12), setArpUCProbeCount(13), setArpRetransTime(14), setIpProxyArp(15), setIpRPFilter(16), setRPFilter(17), setRouteMap(18)  

sleNetIfControlStatus 1.3.6.1.4.1.6296.101.11.1.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleNetIfControlTimer 1.3.6.1.4.1.6296.101.11.1.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleNetIfControlTimeStamp 1.3.6.1.4.1.6296.101.11.1.2.4
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleNetIfControlReqResult 1.3.6.1.4.1.6296.101.11.1.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleNetIfControlIndex 1.3.6.1.4.1.6296.101.11.1.2.6
Network interface index 0 : any(all) 1..4094 : VLAN 4095 : management 4096 : loopback 4097 : NULL device 10000..11023: Tunnel interface index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..11023  

sleNetIfControlDescription 1.3.6.1.4.1.6296.101.11.1.2.7
Description of this interface.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

sleNetIfControlRegState 1.3.6.1.4.1.6296.101.11.1.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unregister(0), register(1)  

sleNetIfControlAdminState 1.3.6.1.4.1.6296.101.11.1.2.9
Administrative state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER down(0), up(1)  

sleNetIfControlMulticast 1.3.6.1.4.1.6296.101.11.1.2.10
Multicast enable/disable state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfControlMtu 1.3.6.1.4.1.6296.101.11.1.2.11
Maximum Transmission Unit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 64..17940  

sleNetIfControlIpMartianFilter 1.3.6.1.4.1.6296.101.11.1.2.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfControlBindingVRFName 1.3.6.1.4.1.6296.101.11.1.2.13
VRF name that this tunnel interface is binding.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleNetIfControlOnFailUseVRF 1.3.6.1.4.1.6296.101.11.1.2.14
Lookup into a global routing table when the VRF routing table lookup was failed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleNetIfControlIpUnreachability 1.3.6.1.4.1.6296.101.11.1.2.15
IP unreachability ON/OFF
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleNetIfControlIpRedirects 1.3.6.1.4.1.6296.101.11.1.2.16
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleNetIfControlIpForwarding 1.3.6.1.4.1.6296.101.11.1.2.17
The IP forwarding status
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfControlAlias 1.3.6.1.4.1.6296.101.11.1.2.18
Alias Name for the Interface
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleNetIfControlIpArpAlias 1.3.6.1.4.1.6296.101.11.1.2.19
IP Arp Alias state
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfControlIpArpAliasMac 1.3.6.1.4.1.6296.101.11.1.2.20
IP Arp Alias MAC
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sleNetIfControlArpMCProbeCount 1.3.6.1.4.1.6296.101.11.1.2.21
ARP request Multicast probe count
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..10  

sleNetIfControlArpUCProbeCount 1.3.6.1.4.1.6296.101.11.1.2.22
ARP request Unicast probe count
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..10  

sleNetIfControlArpRetransTime 1.3.6.1.4.1.6296.101.11.1.2.23
Retrans time of ARP request (unit: 1s)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..300  

sleNetIfControlIpProxyArp 1.3.6.1.4.1.6296.101.11.1.2.24
IP Proxy Arp state
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNetIfControlIpRPFilter 1.3.6.1.4.1.6296.101.11.1.2.25
IP Reverse Path Filtering of CPU
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), loose(1), strict(2)  

sleNetIfControlRPFilter 1.3.6.1.4.1.6296.101.11.1.2.26
Reverse Path Filtering of CHIP (default : looseAllow)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), loose(1), strict(2), looseAllow(3)  

sleNetIfControlRouteMap 1.3.6.1.4.1.6296.101.11.1.2.27
IP Policy route-map name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleNetIfNotification 1.3.6.1.4.1.6296.101.11.1.3
OBJECT IDENTIFIER    

sleNetIfRegStateChanged 1.3.6.1.4.1.6296.101.11.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfProfileChanged 1.3.6.1.4.1.6296.101.11.1.3.2
setNetIfProfile.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfIpMartianFilterChanged 1.3.6.1.4.1.6296.101.11.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfBindingVRFSet 1.3.6.1.4.1.6296.101.11.1.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfBindingVRFUnset 1.3.6.1.4.1.6296.101.11.1.3.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfIpOnFailUseVRFChanged 1.3.6.1.4.1.6296.101.11.1.3.6
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfIpUnreachabilityChanged 1.3.6.1.4.1.6296.101.11.1.3.7
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfIpRedirectsChanged 1.3.6.1.4.1.6296.101.11.1.3.8
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfIpForwardingChanged 1.3.6.1.4.1.6296.101.11.1.3.9
setNetIfIpForwarding
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfAliasChanged 1.3.6.1.4.1.6296.101.11.1.3.10
setAlias
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfIpArpAliasChanged 1.3.6.1.4.1.6296.101.11.1.3.11
setIpArpAlias
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfArpMCProbeCountChanged 1.3.6.1.4.1.6296.101.11.1.3.12
setArpMCProbeCount
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfArpUCProbeCountChanged 1.3.6.1.4.1.6296.101.11.1.3.13
setArpUCProbeCount
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfArpRetransTimeChanged 1.3.6.1.4.1.6296.101.11.1.3.14
setArpRetransTime
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfIpProxyArpChanged 1.3.6.1.4.1.6296.101.11.1.3.15
setIpProxyArp
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfIpRPFilterChanged 1.3.6.1.4.1.6296.101.11.1.3.16
setIpRPFilter
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfRPFilterChanged 1.3.6.1.4.1.6296.101.11.1.3.17
setRPFilter
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetIfRouteMapChanged 1.3.6.1.4.1.6296.101.11.1.3.18
setRouteMap
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpAddress 1.3.6.1.4.1.6296.101.11.2
OBJECT IDENTIFIER    

sleIpAddrTable 1.3.6.1.4.1.6296.101.11.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleIpAddrEntry

sleIpAddrEntry 1.3.6.1.4.1.6296.101.11.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleIpAddrEntry  

sleIpAddrValue 1.3.6.1.4.1.6296.101.11.2.1.1.1
The IP address to which this entry's addressing information pertains.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleIpAddrMask 1.3.6.1.4.1.6296.101.11.2.1.1.2
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..32  

sleIpAddrBcast 1.3.6.1.4.1.6296.101.11.2.1.1.3
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleIpAddrFlag 1.3.6.1.4.1.6296.101.11.2.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  BITS permanent(0), tentative(1), deprecated(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), secondary(7)  

sleIpAddrScope 1.3.6.1.4.1.6296.101.11.2.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER global(0), site(200), link(253), host(254), nowhere(255)  

sleIpAddrIpIndex 1.3.6.1.4.1.6296.101.11.2.1.1.6
The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1024  

sleIpAddrUnnumUsedIp 1.3.6.1.4.1.6296.101.11.2.1.1.7
The Check a specific IP address for using interface unnumbered feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), used(1)  

sleIpAddrControl 1.3.6.1.4.1.6296.101.11.2.2
OBJECT IDENTIFIER    

sleIpAddrControlRequest 1.3.6.1.4.1.6296.101.11.2.2.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createIpAddress(1), destroyIpAddress(2), addIpIndex(3), delIpIndex(4)  

sleIpAddrControlStatus 1.3.6.1.4.1.6296.101.11.2.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleIpAddrControlTimer 1.3.6.1.4.1.6296.101.11.2.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleIpAddrControlTimeStamp 1.3.6.1.4.1.6296.101.11.2.2.4
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleIpAddrControlReqResult 1.3.6.1.4.1.6296.101.11.2.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleIpAddrControlNetIfIndex 1.3.6.1.4.1.6296.101.11.2.2.6
Network interface index 1..4094 : VLAN 10000..11023: Tunnel interface index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094 | 10000..11023  

sleIpAddrControlValue 1.3.6.1.4.1.6296.101.11.2.2.7
The IP address to which this entry's addressing information pertains.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleIpAddrControlMask 1.3.6.1.4.1.6296.101.11.2.2.8
The subnet mask associated with the IP address of this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..32  

sleIpAddrControlFlag 1.3.6.1.4.1.6296.101.11.2.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

sleIpAddrControlScope 1.3.6.1.4.1.6296.101.11.2.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER global(0), link(253), host(254)  

sleIpAddrControlIpIndex 1.3.6.1.4.1.6296.101.11.2.2.11
The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1024  

sleIpAddrNotification 1.3.6.1.4.1.6296.101.11.2.3
OBJECT IDENTIFIER    

sleIpAddressCreated 1.3.6.1.4.1.6296.101.11.2.3.1
createIpAddress.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpAddressDestroyed 1.3.6.1.4.1.6296.101.11.2.3.2
destroyIpAddress.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpAddressIpIndexAdded 1.3.6.1.4.1.6296.101.11.2.3.3
addIpIndex
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpAddressIpIndexDeleted 1.3.6.1.4.1.6296.101.11.2.3.4
delIpIndex
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArp 1.3.6.1.4.1.6296.101.11.3
OBJECT IDENTIFIER    

sleArpTable 1.3.6.1.4.1.6296.101.11.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleArpEntry

sleArpEntry 1.3.6.1.4.1.6296.101.11.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleArpEntry  

sleArpIpAddress 1.3.6.1.4.1.6296.101.11.3.1.1.1
The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleArpPhyAddress 1.3.6.1.4.1.6296.101.11.3.1.1.2
The media-dependent `physical' address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sleArpPortIndex 1.3.6.1.4.1.6296.101.11.3.1.1.3
The interface on which this entry's equivalence is effective. 0: for any ports.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

sleArpState 1.3.6.1.4.1.6296.101.11.3.1.1.4
Arp entry's currently status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

sleArpHwType 1.3.6.1.4.1.6296.101.11.3.1.1.5
Hardware Type of media.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(1)  

sleArpHwUsed 1.3.6.1.4.1.6296.101.11.3.1.1.6
Arp entry's currently chip usage state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonused(0), used(1)  

sleArpUsedTime 1.3.6.1.4.1.6296.101.11.3.1.1.7
Arp entry's chip used time.(if sleArpState is 0, always 0 and if sleArpHwUsed is 0, always 0.)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10000000  

sleArpControl 1.3.6.1.4.1.6296.101.11.3.2
OBJECT IDENTIFIER    

sleArpControlRequest 1.3.6.1.4.1.6296.101.11.3.2.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createArpEntry(1), destroyArpEntry(2), clearArpTable(3), clearArpTableByAddr(4)  

sleArpControlStatus 1.3.6.1.4.1.6296.101.11.3.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleArpControlTimer 1.3.6.1.4.1.6296.101.11.3.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleArpControlTimeStamp 1.3.6.1.4.1.6296.101.11.3.2.4
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleArpControlReqResult 1.3.6.1.4.1.6296.101.11.3.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleArpControlNetIfIndex 1.3.6.1.4.1.6296.101.11.3.2.6
Network interface index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4096  

sleArpControlIpAddress 1.3.6.1.4.1.6296.101.11.3.2.7
The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleArpControlPhyAddress 1.3.6.1.4.1.6296.101.11.3.2.8
The media-dependent `physical' address.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sleArpControlState 1.3.6.1.4.1.6296.101.11.3.2.9
Arp entry's currently status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

sleArpControlMask 1.3.6.1.4.1.6296.101.11.3.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

sleArpNotification 1.3.6.1.4.1.6296.101.11.3.3
OBJECT IDENTIFIER    

sleArpEntryCreated 1.3.6.1.4.1.6296.101.11.3.3.1
createArpEntry.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpEntryDestroyed 1.3.6.1.4.1.6296.101.11.3.3.2
destroyArpEntry.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpTableCleared 1.3.6.1.4.1.6296.101.11.3.3.3
clearArpTable. In this notification PDU, key of sleArpState is ifindex.0.0.0.0.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpTableClearedByAddr 1.3.6.1.4.1.6296.101.11.3.3.4
clearArpTableByAddr
Status: current Access: read-write
NOTIFICATION-TYPE    

sleRoute 1.3.6.1.4.1.6296.101.11.4
OBJECT IDENTIFIER    

sleRouteTable 1.3.6.1.4.1.6296.101.11.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleRouteEntry

sleRouteEntry 1.3.6.1.4.1.6296.101.11.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleRouteEntry  

sleRouteDstAddress 1.3.6.1.4.1.6296.101.11.4.1.1.1
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleRouteDstMask 1.3.6.1.4.1.6296.101.11.4.1.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the sleRouteDstAddress field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the sleRouteDstMask by determining whether the value of the correspondent sleRouteDstAddress field belong to a class-A, B, or C network. If the value of the sleRouteDstAddress is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..32  

sleRouteGateway 1.3.6.1.4.1.6296.101.11.4.1.1.3
The Gateway IP Address. 0.0.0.0/0 : indicate default gateway or invalid
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleRouteInterface 1.3.6.1.4.1.6296.101.11.4.1.1.4
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of sleNetIfIndex. Network interface index 0: invalid 1..4094: VLAN 4095: management 4096: loopback 4097: NULL device 10000..11023: Tunnel interface index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..11023  

sleRouteType 1.3.6.1.4.1.6296.101.11.4.1.1.5
The type of route. Note that the values direct and indirect refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid has the effect of invalidating the corresponding entry in the sleRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant sleRouteType object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), direct(3), indirect(4)  

sleRouteProto 1.3.6.1.4.1.6296.101.11.4.1.1.6
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), localDirect(2), netmgmtStatic(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15), ciscoEigrp(16), dhcp(17)  

sleRouteMetric 1.3.6.1.4.1.6296.101.11.4.1.1.7
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's sleRouteProto value. If this metric is not used, its value should be set to -1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -1..255  

sleRouteActive 1.3.6.1.4.1.6296.101.11.4.1.1.8
The active status for this routing entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

sleRouteBindingSrcAddr 1.3.6.1.4.1.6296.101.11.4.1.1.9
The binding source IP Address for this route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleRouteDistance 1.3.6.1.4.1.6296.101.11.4.1.1.10
The Distance value for this route.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

sleRouteSubtype 1.3.6.1.4.1.6296.101.11.4.1.1.11
The subtype of this route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), ospfIa(1), ospfNssa1(2), ospfNssa2(3), ospfExternal1(4), ospfExternal2(5), isisL1(8), isisL2(9), isisIa(10), bgpMpls(11)  

sleRouteNexthopStatus 1.3.6.1.4.1.6296.101.11.4.1.1.12
The nexthop status of this route.
Status: current Access: read-only
OBJECT-TYPE    
  BITS active(0), fib(1), recursive(2)  

sleRouteRibStatus 1.3.6.1.4.1.6296.101.11.4.1.1.13
The rib status for this route.
Status: current Access: read-only
OBJECT-TYPE    
  BITS internal(0), selfroute(1), blackhole(2), nonfib(3), selected(4), changed(5), static(6), stale(7)  

sleRouteVRFIndex 1.3.6.1.4.1.6296.101.11.4.1.1.14
VRF index in sleIpVRFTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

sleRouteControl 1.3.6.1.4.1.6296.101.11.4.2
OBJECT IDENTIFIER    

sleRouteControlRequest 1.3.6.1.4.1.6296.101.11.4.2.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createStaticRoute(1), destroyStaticRoute(2), setStaticRouteProfile(3)  

sleRouteControlStatus 1.3.6.1.4.1.6296.101.11.4.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleRouteControlTimer 1.3.6.1.4.1.6296.101.11.4.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleRouteControlTimeStamp 1.3.6.1.4.1.6296.101.11.4.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleRouteControlReqResult 1.3.6.1.4.1.6296.101.11.4.2.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleRouteControlDstAddress 1.3.6.1.4.1.6296.101.11.4.2.6
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleRouteControlDstMask 1.3.6.1.4.1.6296.101.11.4.2.7
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the sleRouteDstAddress field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the sleRouteDstMask by determining whether the value of the correspondent sleRouteDstAddress field belong to a class-A, B, or C network. If the value of the sleRouteDstAddress is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

sleRouteControlGateway 1.3.6.1.4.1.6296.101.11.4.2.8
The Gateway IP Address. 0.0.0.0/0 : indicate default gateway or invalid
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleRouteControlInterface 1.3.6.1.4.1.6296.101.11.4.2.9
Network interface index 0: invalid 1..4094: VLAN 4095: management 4096: loopback 4097: NULL device 10000..11023: Tunnel interface index To config interface, sleRouteControlGateway have to be removed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..11023  

sleRouteControlBindingSrcAddr 1.3.6.1.4.1.6296.101.11.4.2.10
The binding source IP Address for this route.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleRouteControlDistance 1.3.6.1.4.1.6296.101.11.4.2.11
The Distance value for this route.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

sleRouteControlVRFIndex 1.3.6.1.4.1.6296.101.11.4.2.12
VRF index in sleIpVRFTable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

sleRouteNotification 1.3.6.1.4.1.6296.101.11.4.3
OBJECT IDENTIFIER    

sleRouteStaticCreated 1.3.6.1.4.1.6296.101.11.4.3.1
createStaticRoute
Status: current Access: read-write
NOTIFICATION-TYPE    

sleRouteStaticDestroyed 1.3.6.1.4.1.6296.101.11.4.3.2
destroyStaticRoute
Status: current Access: read-write
NOTIFICATION-TYPE    

sleRouteStaticProfileChanged 1.3.6.1.4.1.6296.101.11.4.3.3
setStaticRouteProfile
Status: current Access: read-write
NOTIFICATION-TYPE    

sleDhcpClient 1.3.6.1.4.1.6296.101.11.5
OBJECT IDENTIFIER    

sleDhcpClTable 1.3.6.1.4.1.6296.101.11.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleDhcpClEntry

sleDhcpClEntry 1.3.6.1.4.1.6296.101.11.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleDhcpClEntry  

sleDhcpClMode 1.3.6.1.4.1.6296.101.11.5.1.1.1
DHCP Client activity state in this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleDhcpClIpAddr 1.3.6.1.4.1.6296.101.11.5.1.1.2
The IP address acquired by DHCP Client active in this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleDhcpClNetmask 1.3.6.1.4.1.6296.101.11.5.1.1.3
The subnet mask associated with the IP address acquired by DHCP Client. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleDhcpClGateway 1.3.6.1.4.1.6296.101.11.5.1.1.4
The Gateway's IP address acquired by DHCP Client active in this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleDhcpClDnsServer 1.3.6.1.4.1.6296.101.11.5.1.1.5
The DNS server's IP address acquired by DHCP Client active in this interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleDhcpClServer 1.3.6.1.4.1.6296.101.11.5.1.1.6
DHCP Server's IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleDhcpClClientId 1.3.6.1.4.1.6296.101.11.5.1.1.7
DHCP Client-identifier value. This is used by DHCP clients to specify their unique identifier. DHCP servers use this value to index their database of address bindings. This value is expected to be unique for all clients in an administrative domain.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleDhcpClClientIdStyle 1.3.6.1.4.1.6296.101.11.5.1.1.8
DHCP Client-identifier input style. 0 : ascii string format 1 : hexadecimal format
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ascii(0), hex(1)  

sleDhcpClClassId 1.3.6.1.4.1.6296.101.11.5.1.1.9
DHCP Class identifier value. This is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. The information is a string of n octets, interpreted by servers. Vendors may choose to define specific vendor class identifiers to convey particular configuration or other identification information about a client. For example, the identifier may encode the client's hardware configuration.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

sleDhcpClClassIdStyle 1.3.6.1.4.1.6296.101.11.5.1.1.10
DHCP Class identifier input style. 0 : ascii string format 1 : hexadecimal format
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ascii(0), hex(1)  

sleDhcpClLeasetime 1.3.6.1.4.1.6296.101.11.5.1.1.11
The leased time for IP address acquired by DHCP Client. Default lease-time: 3600s
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 120..2147483637  

sleDhcpClState 1.3.6.1.4.1.6296.101.11.5.1.1.12
The operating status of DHCP Client.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER halt(0), init(1), request(3), bound(4), renew(5), rebind(6), nonactive(255)  

sleDhcpClControl 1.3.6.1.4.1.6296.101.11.5.2
OBJECT IDENTIFIER    

sleDhcpClControlRequest 1.3.6.1.4.1.6296.101.11.5.2.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setDhcpClMode(1), setDhcpClProfile(2), changeDhcpClState(3)  

sleDhcpClControlStatus 1.3.6.1.4.1.6296.101.11.5.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleDhcpClControlTimer 1.3.6.1.4.1.6296.101.11.5.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleDhcpClControlTimeStamp 1.3.6.1.4.1.6296.101.11.5.2.4
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleDhcpClControlReqResult 1.3.6.1.4.1.6296.101.11.5.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleDhcpClControlNetIfIndex 1.3.6.1.4.1.6296.101.11.5.2.6
Network Interface Index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

sleDhcpClControlMode 1.3.6.1.4.1.6296.101.11.5.2.7
DHCP Client activity state in this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleDhcpClControlClientId 1.3.6.1.4.1.6296.101.11.5.2.8
DHCP Client-identifier value. This is used by DHCP clients to specify their unique identifier. DHCP servers use this value to index their database of address bindings. This value is expected to be unique for all clients in an administrative domain.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleDhcpClControlClientIdStyle 1.3.6.1.4.1.6296.101.11.5.2.9
DHCP Client-identifier input style. 0 : ascii string format 1 : hexadecimal format
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ascii(0), hex(1)  

sleDhcpClControlClassId 1.3.6.1.4.1.6296.101.11.5.2.10
DHCP Class identifier value. This is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. The information is a string of n octets, interpreted by servers. Vendors may choose to define specific vendor class identifiers to convey particular configuration or other identification information about a client. For example, the identifier may encode the client's hardware configuration.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleDhcpClControlClassIdStyle 1.3.6.1.4.1.6296.101.11.5.2.11
DHCP Class identifier input style. 0 : ascii string format 1 : hexadecimal format
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ascii(0), hex(1)  

sleDhcpClControlLeasetime 1.3.6.1.4.1.6296.101.11.5.2.12
The leased time for IP address acquired by DHCP Client. Default lease-time: 3600s
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 120..2147483637  

sleDhcpClControlUpdateIP 1.3.6.1.4.1.6296.101.11.5.2.13
Update DHCP client operating status. 0 : default 1 : renew 2 : release
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER remain(0), renew(1), release(2)  

sleDhcpClNotification 1.3.6.1.4.1.6296.101.11.5.3
OBJECT IDENTIFIER    

sleDhcpClModeChanged 1.3.6.1.4.1.6296.101.11.5.3.1
setDhcpClMode.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleDhcpClProfileChanged 1.3.6.1.4.1.6296.101.11.5.3.2
setDhcpClProfile.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleDhcpClStateChanged 1.3.6.1.4.1.6296.101.11.5.3.3
ChangeDhcpClState.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2DhcpClient 1.3.6.1.4.1.6296.101.11.6
OBJECT IDENTIFIER    

sleNetworkBase 1.3.6.1.4.1.6296.101.11.7
OBJECT IDENTIFIER    

sleNetworkBaseInfo 1.3.6.1.4.1.6296.101.11.7.1
OBJECT IDENTIFIER    

sleNetworkArpAgingTime 1.3.6.1.4.1.6296.101.11.7.1.1
System Arp Aging Time
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 10..2147483637  

sleNetworkBaseVrfDynamicForwardBinding 1.3.6.1.4.1.6296.101.11.7.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), vrrp(1)  

sleNetworkBaseControl 1.3.6.1.4.1.6296.101.11.7.2
OBJECT IDENTIFIER    

sleNetworkControlRequest 1.3.6.1.4.1.6296.101.11.7.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setArpProfile(1), setVrfForwdDynamicStatus(2)  

sleNetworkControlStatus 1.3.6.1.4.1.6296.101.11.7.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleNetworkControlTimer 1.3.6.1.4.1.6296.101.11.7.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleNetworkControlTimeStamp 1.3.6.1.4.1.6296.101.11.7.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleNetworkControlReqResult 1.3.6.1.4.1.6296.101.11.7.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleNetworkControlArpAgingTime 1.3.6.1.4.1.6296.101.11.7.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 10..2147483637  

sleNetworkControlVrfDynamicForwardBinding 1.3.6.1.4.1.6296.101.11.7.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), vrrp(1)  

sleNetworkBaseNotification 1.3.6.1.4.1.6296.101.11.7.3
OBJECT IDENTIFIER    

sleNetworkArpProfileChanged 1.3.6.1.4.1.6296.101.11.7.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnel 1.3.6.1.4.1.6296.101.11.8
OBJECT IDENTIFIER    

sleTunnelIfTable 1.3.6.1.4.1.6296.101.11.8.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleTunnelIfEntry

sleTunnelIfEntry 1.3.6.1.4.1.6296.101.11.8.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleTunnelIfEntry  

sleTunnelIfIndex 1.3.6.1.4.1.6296.101.11.8.1.1.1
Tunnel interface index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 10000..11023  

sleTunnelIfLocalAddress 1.3.6.1.4.1.6296.101.11.8.1.1.2
The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleTunnelIfRemoteAddress 1.3.6.1.4.1.6296.101.11.8.1.1.3
The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleTunnelIfMode 1.3.6.1.4.1.6296.101.11.8.1.1.4
The encapsulation method used by the tunnel. other(1) - none of the following direct(2) - intermediate header gre(3) - GRE encapsulation minimal(4) - Minimal encapsulation l2tp(5) - L2TP encapsulation pptp(6) - PPTP encapsulation l2f(7) - L2F encapsulation udp(8) - UDP encapsulation atmp(9) - ATMP encapsulation msdp(10) - MSDP encapsulation sixToFour(11) - 6to4 encapsulation sixOverFour(12) - 6over4 encapsulation isatap(13) - ISATAP encapsulation teredo(14) - Teredo encapsulation
Status: current Access: read-only
OBJECT-TYPE    
  IANAtunnelType  

sleTunnelIfTTL 1.3.6.1.4.1.6296.101.11.8.1.1.5
The TTL to use in the outer IP header.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

sleTunnelIfDscpMode 1.3.6.1.4.1.6296.101.11.8.1.1.6
The DiffServ field mode to use in the outer IP header. A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dscpAssign(1), dscpCopyFromPacket(2), dscpMapFromPacket(3)  

sleTunnelIfDscp 1.3.6.1.4.1.6296.101.11.8.1.1.7
The static DiffServ field value to use in the outer IP header.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

sleTunnelIfKeepaliveInterval 1.3.6.1.4.1.6296.101.11.8.1.1.8
Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..32767  

sleTunnelIfKeepaliveRetry 1.3.6.1.4.1.6296.101.11.8.1.1.9
Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

sleTunnelIfPathMtuDiscovery 1.3.6.1.4.1.6296.101.11.8.1.1.10
Path mtu discovery on tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleTunnelIfVRFName 1.3.6.1.4.1.6296.101.11.8.1.1.11
VPN Routing/Forwarding instance name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleTunnelIfBindingPorts 1.3.6.1.4.1.6296.101.11.8.1.1.12
Tunnel binding ports map.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleTunnelIfLocalAddress6 1.3.6.1.4.1.6296.101.11.8.1.1.13
The address of the local endpoint of the tunnel for IPv6
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

sleTunnelIfRemoteAddress6 1.3.6.1.4.1.6296.101.11.8.1.1.14
The address of the remote endpoint of the tunnel for IPv6
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

sleTunnelIfChecksum 1.3.6.1.4.1.6296.101.11.8.1.1.15
A checksum feature for the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleTunnelIfDmac 1.3.6.1.4.1.6296.101.11.8.1.1.16
A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.)
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sleTunnelIfTos 1.3.6.1.4.1.6296.101.11.8.1.1.17
A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

sleTunnelIfControl 1.3.6.1.4.1.6296.101.11.8.2
OBJECT IDENTIFIER    

sleTunnelIfControlRequest 1.3.6.1.4.1.6296.101.11.8.2.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createTunnelInterface(1), deleteTunnelInterface(2), setTunnelIfLocalAddress(3), setTunnelIfRemoteAddress(4), setTunnelIfMode(5), setTunnelIfTTL(6), setTunnelIfDscp(7), setTunnelIfKeepalive(8), setTunnelIfPathMtuDiscovery(9), setTunnelIfVRFName(10), unsetTunnelIfVRFName(11), setTunnelLocalAddr6(12), setTunnelRemoteAddr6(13), setTunnelChecksum(14), setTunnelDmac(15), setTunnelTos(16)  

sleTunnelIfControlStatus 1.3.6.1.4.1.6296.101.11.8.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleTunnelIfControlTimer 1.3.6.1.4.1.6296.101.11.8.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleTunnelIfControlTimeStamp 1.3.6.1.4.1.6296.101.11.8.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleTunnelIfControlReqResult 1.3.6.1.4.1.6296.101.11.8.2.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleTunnelIfControlIndex 1.3.6.1.4.1.6296.101.11.8.2.6
Tunnel interface index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10000..11023  

sleTunnelIfControlLocalAddress 1.3.6.1.4.1.6296.101.11.8.2.7
The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleTunnelIfControlRemoteAddress 1.3.6.1.4.1.6296.101.11.8.2.8
The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleTunnelIfControlMode 1.3.6.1.4.1.6296.101.11.8.2.9
The encapsulation method used by the tunnel. other(1) - none of the following direct(2) - intermediate header gre(3) - GRE encapsulation minimal(4) - Minimal encapsulation l2tp(5) - L2TP encapsulation pptp(6) - PPTP encapsulation l2f(7) - L2F encapsulation udp(8) - UDP encapsulation atmp(9) - ATMP encapsulation msdp(10) - MSDP encapsulation sixToFour(11) - 6to4 encapsulation sixOverFour(12) - 6over4 encapsulation isatap(13) - ISATAP encapsulation teredo(14) - Teredo encapsulation
Status: current Access: read-write
OBJECT-TYPE    
  IANAtunnelType  

sleTunnelIfControlTTL 1.3.6.1.4.1.6296.101.11.8.2.10
The TTL to use in the outer IP header.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

sleTunneIflControlDscpMode 1.3.6.1.4.1.6296.101.11.8.2.11
The DiffServ field mode to use in the outer IP header. A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dscpAssign(1), dscpCopyFromPacket(2), dscpMapFromPacket(3)  

sleTunneIflControlDscp 1.3.6.1.4.1.6296.101.11.8.2.12
The static DiffServ field value to use in the outer IP header.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

sleTunnelIfControlKeepaliveInterval 1.3.6.1.4.1.6296.101.11.8.2.13
Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..32767  

sleTunneIflControlKeepaliveRetry 1.3.6.1.4.1.6296.101.11.8.2.14
Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

sleTunnelIfControlPathMtuDiscovery 1.3.6.1.4.1.6296.101.11.8.2.15
Path mtu discovery on tunnel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleTunnelIfControlVRFName 1.3.6.1.4.1.6296.101.11.8.2.16
VPN Routing/Forwarding instance name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleTunnelIfControlLocalAddress6 1.3.6.1.4.1.6296.101.11.8.2.17
The address of the local endpoint of the tunnel for IPv6
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleTunnelIfControlRemoteAddress6 1.3.6.1.4.1.6296.101.11.8.2.18
The address of the remote endpoint of the tunnel for IPv6
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleTunnelIfControlChecksum 1.3.6.1.4.1.6296.101.11.8.2.19
A checksum feature for the tunnel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleTunnelIfControlDmac 1.3.6.1.4.1.6296.101.11.8.2.20
A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.)
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sleTunnelIfControlTos 1.3.6.1.4.1.6296.101.11.8.2.21
A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

sleTunnelIfNotification 1.3.6.1.4.1.6296.101.11.8.3
OBJECT IDENTIFIER    

sleTunnelIfCreated 1.3.6.1.4.1.6296.101.11.8.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfDeleted 1.3.6.1.4.1.6296.101.11.8.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfLocalAddressChanged 1.3.6.1.4.1.6296.101.11.8.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfRemoteAddressChanged 1.3.6.1.4.1.6296.101.11.8.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfModeChanged 1.3.6.1.4.1.6296.101.11.8.3.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfTTLChanged 1.3.6.1.4.1.6296.101.11.8.3.6
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfDscpChanged 1.3.6.1.4.1.6296.101.11.8.3.7
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfKeepaliveChanged 1.3.6.1.4.1.6296.101.11.8.3.8
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfPathMtuDiscoveryChanged 1.3.6.1.4.1.6296.101.11.8.3.9
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfVRFNameSet 1.3.6.1.4.1.6296.101.11.8.3.10
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfVRFNameUnset 1.3.6.1.4.1.6296.101.11.8.3.11
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfLocalAddress6Changed 1.3.6.1.4.1.6296.101.11.8.3.12
setTunnelLocalAddr6
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelIfRemoteAddress6Changed 1.3.6.1.4.1.6296.101.11.8.3.13
setTunnelRemoteAddr6
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelAddressTable 1.3.6.1.4.1.6296.101.11.8.4
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleTunnelAddressEntry

sleTunnelAddressEntry 1.3.6.1.4.1.6296.101.11.8.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleTunnelAddressEntry  

sleTunnelAddressValue 1.3.6.1.4.1.6296.101.11.8.4.1.1
The IP address to which this entry's addressing information pertains.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleTunnelAddressMask 1.3.6.1.4.1.6296.101.11.8.4.1.2
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..128  

sleTunnelIpAddrBcast 1.3.6.1.4.1.6296.101.11.8.4.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleTunnelAddressFlag 1.3.6.1.4.1.6296.101.11.8.4.1.4
dynamic: ~ permanent primary : ~ secondary anycast: this bit is available for ipv6 only. The others are available for ipv4 only.
Status: current Access: read-only
OBJECT-TYPE    
  BITS permanent(0), tentative(1), deprecated(2), anycast(3), reserved1(4), reserved2(5), reserved3(6), secondary(7)  

sleTunnelAddressScope 1.3.6.1.4.1.6296.101.11.8.4.1.5
default : global In linux, 200 - site 0 - global 1..252 - scopeNUM 253 - link 254 - host 255 - nowhere
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

sleTunnelAddressUnnumIfIndex 1.3.6.1.4.1.6296.101.11.8.4.1.6
The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.) (ex. br100 -> 100, br200 -> 200)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

sleTunnelAddressUnnumIpIndex 1.3.6.1.4.1.6296.101.11.8.4.1.7
The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 2..1024  

sleTunnelAddressControl 1.3.6.1.4.1.6296.101.11.8.5
OBJECT IDENTIFIER    

sleTunnelAddressControlRequest 1.3.6.1.4.1.6296.101.11.8.5.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createTunnelIpAddress(1), destroyTunnelIpAddress(2), setIfUnnumbered(3), delIfUnnumbered(4)  

sleTunnelAddressControlStatus 1.3.6.1.4.1.6296.101.11.8.5.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleTunnelAddressControlTimer 1.3.6.1.4.1.6296.101.11.8.5.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleTunnelAddressControlTimeStamp 1.3.6.1.4.1.6296.101.11.8.5.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleTunnelAddressControlReqResult 1.3.6.1.4.1.6296.101.11.8.5.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleTunnelAddressControlTunnelIfIndex 1.3.6.1.4.1.6296.101.11.8.5.6
Tunnel interface index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10000..11023  

sleTunnelAddressControlValue 1.3.6.1.4.1.6296.101.11.8.5.7
The IP address to which this entry's addressing information pertains.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleTunnelAddressControlMask 1.3.6.1.4.1.6296.101.11.8.5.8
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..128  

sleTunnelAddressControlFlag 1.3.6.1.4.1.6296.101.11.8.5.9
default : primary
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), secondary(2), anycast(3), unicast(4)  

sleTunnelAddressControlScope 1.3.6.1.4.1.6296.101.11.8.5.10
default : global not applicable : nowhere
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER global(0), link(253), host(254)  

sleTunnelAddressControlUnnumIfIndex 1.3.6.1.4.1.6296.101.11.8.5.11
The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.) (ex. br100 -> 100, br200 -> 200)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

sleTunnelAddressControlUnnumIpIndex 1.3.6.1.4.1.6296.101.11.8.5.12
The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 2..1024  

sleTunnelAddressNotification 1.3.6.1.4.1.6296.101.11.8.6
OBJECT IDENTIFIER    

sleTunnelAddressCreated 1.3.6.1.4.1.6296.101.11.8.6.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelAddressDeleted 1.3.6.1.4.1.6296.101.11.8.6.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelAddressUnnumChanged 1.3.6.1.4.1.6296.101.11.8.6.3
setIfUnnumbered
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTunnelAddressUnnumDeleted 1.3.6.1.4.1.6296.101.11.8.6.4
delIfUnnumbered
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpVRF 1.3.6.1.4.1.6296.101.11.9
OBJECT IDENTIFIER    

sleIpVRFTable 1.3.6.1.4.1.6296.101.11.9.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleIpVRFEntry

sleIpVRFEntry 1.3.6.1.4.1.6296.101.11.9.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleIpVRFEntry  

sleIpVRFIndex 1.3.6.1.4.1.6296.101.11.9.1.1.1
VRF index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

sleIpVRFName 1.3.6.1.4.1.6296.101.11.9.1.1.2
VRF name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleIpVRFDesignatedPorts 1.3.6.1.4.1.6296.101.11.9.1.1.3
The port map of VRF designated-port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleIpVRFRouterId 1.3.6.1.4.1.6296.101.11.9.1.1.4
Router-Identifier
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleIpVRFDescription 1.3.6.1.4.1.6296.101.11.9.1.1.5
The description of VRF.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sleIpVRFControl 1.3.6.1.4.1.6296.101.11.9.2
OBJECT IDENTIFIER    

sleIpVRFControlRequest 1.3.6.1.4.1.6296.101.11.9.2.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createIpVRF(1), deleteIpVRF(2), setIpVRFDesignatedPorts(3), unsetIpVRFDesignatedPorts(4), setVRFRouterId(5), setVRFDescription(6)  

sleIpVRFControlStatus 1.3.6.1.4.1.6296.101.11.9.2.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleIpVRFControlTimer 1.3.6.1.4.1.6296.101.11.9.2.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleIpVRFControlTimeStamp 1.3.6.1.4.1.6296.101.11.9.2.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleIpVRFControlReqResult 1.3.6.1.4.1.6296.101.11.9.2.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleIpVRFControlName 1.3.6.1.4.1.6296.101.11.9.2.6
VRF name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleIpVRFControlDesignatedPorts 1.3.6.1.4.1.6296.101.11.9.2.7
The port map of VRF designated-port.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleIpVRFControlRouterId 1.3.6.1.4.1.6296.101.11.9.2.8
Router-Identifier
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleIpVRFControlDescription 1.3.6.1.4.1.6296.101.11.9.2.9
The description of VRF.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sleIpVRFNotification 1.3.6.1.4.1.6296.101.11.9.3
OBJECT IDENTIFIER    

sleIpVRFCreated 1.3.6.1.4.1.6296.101.11.9.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpVRFDeleted 1.3.6.1.4.1.6296.101.11.9.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpVRFDesignatedPortsSet 1.3.6.1.4.1.6296.101.11.9.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpVRFDesignatedPortsUnset 1.3.6.1.4.1.6296.101.11.9.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpVRFRouterIdChanged 1.3.6.1.4.1.6296.101.11.9.3.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpVRFDescriptionChanged 1.3.6.1.4.1.6296.101.11.9.3.6
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpVRFSelectionSourceTable 1.3.6.1.4.1.6296.101.11.9.4
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleIpVRFSelectionSourceEntry

sleIpVRFSelectionSourceEntry 1.3.6.1.4.1.6296.101.11.9.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleIpVRFSelectionSourceEntry  

sleIpVRFSelectionSrcIndex 1.3.6.1.4.1.6296.101.11.9.4.1.1
VRF selection source index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

sleIpVRFSelectionSrcAddr 1.3.6.1.4.1.6296.101.11.9.4.1.2
VRF selection by source IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleIpVRFSelectionSrcMask 1.3.6.1.4.1.6296.101.11.9.4.1.3
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..32  

sleIpVRFSelectionSrcVRFName 1.3.6.1.4.1.6296.101.11.9.4.1.4
VPN Routing/Forwarding instance name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleIpVRFSelectionSourceControl 1.3.6.1.4.1.6296.101.11.9.5
OBJECT IDENTIFIER    

sleIpVRFSelectionSrcControlRequest 1.3.6.1.4.1.6296.101.11.9.5.1
The request of a user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setVRFSelectionSource(1), unsetVRFSelectionSource(2)  

sleIpVRFSelectionSrcControlStatus 1.3.6.1.4.1.6296.101.11.9.5.2
The status of a user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleIpVRFSelectionSrcControlTimer 1.3.6.1.4.1.6296.101.11.9.5.3
The maximum wait time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleIpVRFSelectionSrcControlTimeStamp 1.3.6.1.4.1.6296.101.11.9.5.4
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleIpVRFSelectionSrcControlReqResult 1.3.6.1.4.1.6296.101.11.9.5.5
The time stamp of the last command (end of command).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleIpVRFSelectionSrcControlAddr 1.3.6.1.4.1.6296.101.11.9.5.6
VRF selection by source IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleIpVRFSelectionSrcControlMask 1.3.6.1.4.1.6296.101.11.9.5.7
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..32  

sleIpVRFSelectionSrcControlVRFName 1.3.6.1.4.1.6296.101.11.9.5.8
VPN Routing/Forwarding instance name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleIpVRFSelectionSourceNotification 1.3.6.1.4.1.6296.101.11.9.6
OBJECT IDENTIFIER    

sleIpVRFSelectionSrcSet 1.3.6.1.4.1.6296.101.11.9.6.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleIpVRFSelectionSrcUnset 1.3.6.1.4.1.6296.101.11.9.6.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBFD 1.3.6.1.4.1.6296.101.11.10
OBJECT IDENTIFIER    

sleBFDBase 1.3.6.1.4.1.6296.101.11.10.1
OBJECT IDENTIFIER    

sleBFDBaseInfo 1.3.6.1.4.1.6296.101.11.10.1.1
OBJECT IDENTIFIER    

sleBFDEnable 1.3.6.1.4.1.6296.101.11.10.1.1.1
BFD fast-detect is enabled or disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleBFDEchoEnable 1.3.6.1.4.1.6296.101.11.10.1.1.2
BFD Echo function is enabled or disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleBFDSlowTimer 1.3.6.1.4.1.6296.101.11.10.1.1.3
BFD Slow Timer in unit of milliseconds default: 1000(ms)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1000..30000  

sleBFDBaseControl 1.3.6.1.4.1.6296.101.11.10.1.2
OBJECT IDENTIFIER    

sleBFDControlRequest 1.3.6.1.4.1.6296.101.11.10.1.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setBFDBaseProfile(1)  

sleBFDControlStatus 1.3.6.1.4.1.6296.101.11.10.1.2.2
The status of user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleBFDControlTimer 1.3.6.1.4.1.6296.101.11.10.1.2.3
The maximum time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleBFDControlTimeStamp 1.3.6.1.4.1.6296.101.11.10.1.2.4
The time stamp of the last command(end of command).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleBFDControlReqResult 1.3.6.1.4.1.6296.101.11.10.1.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleBFDControlEnable 1.3.6.1.4.1.6296.101.11.10.1.2.6
BFD fast-detect is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleBFDControlEchoEnable 1.3.6.1.4.1.6296.101.11.10.1.2.7
BFD Echo function is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleBFDControlSlowTimer 1.3.6.1.4.1.6296.101.11.10.1.2.8
BFD Slow Timer in unit of milliseconds default: 1000(ms)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1000..30000  

sleBFDBaseNotification 1.3.6.1.4.1.6296.101.11.10.1.3
OBJECT IDENTIFIER    

sleBFDBaseProfileChanged 1.3.6.1.4.1.6296.101.11.10.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBFDInterface 1.3.6.1.4.1.6296.101.11.10.2
OBJECT IDENTIFIER    

sleBFDInterfaceTable 1.3.6.1.4.1.6296.101.11.10.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleBFDInterfaceEntry

sleBFDInterfaceEntry 1.3.6.1.4.1.6296.101.11.10.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleBFDInterfaceEntry  

sleBFDIfRxInterval 1.3.6.1.4.1.6296.101.11.10.2.1.1.1
Required Min Rx Interval of BFD control packet in this interface. default: 50(ms)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 50..10000  

sleBFDIfTxInterval 1.3.6.1.4.1.6296.101.11.10.2.1.1.2
Required Min Tx Interval of BFD control packet in this interface. default: 50(ms)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 50..10000  

sleBFDIfDetectMulti 1.3.6.1.4.1.6296.101.11.10.2.1.1.3
Detect Multi value of BFD control packet in this interface. default: 3
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 3..255  

sleBFDIfRxIntervalIPv6 1.3.6.1.4.1.6296.101.11.10.2.1.1.4
Required Min Rx Interval of IPv6 BFD control packet in this interface. default: 50(ms)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 50..1000  

sleBFDIfTxIntervalIJPv6 1.3.6.1.4.1.6296.101.11.10.2.1.1.5
Required Min Tx Interval of IPv6 BFD control packet in this interface. default: 50(ms)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 50..1000  

sleBFDIfDetectMultiIPv6 1.3.6.1.4.1.6296.101.11.10.2.1.1.6
Detect Multi value of IPv6 BFD control packet in this interface. default: 3
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 3..50  

sleBFDInterfaceControl 1.3.6.1.4.1.6296.101.11.10.2.2
OBJECT IDENTIFIER    

sleBFDIfControlRequest 1.3.6.1.4.1.6296.101.11.10.2.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setBFDIfProfile(1)  

sleBFDIfControlStatus 1.3.6.1.4.1.6296.101.11.10.2.2.2
The status of user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleBFDIfControlTimer 1.3.6.1.4.1.6296.101.11.10.2.2.3
The maximum time for the manager for a long running user command.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleBFDIfControlTimeStamp 1.3.6.1.4.1.6296.101.11.10.2.2.4
The time stamp of the last command(end of command).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleBFDIfControlReqResult 1.3.6.1.4.1.6296.101.11.10.2.2.5
The result of the last user command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleBFDIfControlNetIfIndex 1.3.6.1.4.1.6296.101.11.10.2.2.6
BFD Interface Index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4097  

sleBFDIfControlRxInterval 1.3.6.1.4.1.6296.101.11.10.2.2.7
Required Min Rx Interval of BFD control packet in this interface. default: 50(ms)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 50..10000  

sleBFDIfControlTxInterval 1.3.6.1.4.1.6296.101.11.10.2.2.8
Required Min Tx Interval of BFD control packet in this interface. default: 50(ms)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 50..10000  

sleBFDIfControlDetectMulti 1.3.6.1.4.1.6296.101.11.10.2.2.9
Detect Multi value of BFD control packet in this interface. default: 3
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 3..255  

sleBFDIfControlRxIntervalIPv6 1.3.6.1.4.1.6296.101.11.10.2.2.10
Required Min Rx Interval of IPv6 BFD control packet in this interface. default: 50(ms)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 50..1000  

sleBFDIfControlTxIntervalIPv6 1.3.6.1.4.1.6296.101.11.10.2.2.11
Required Min Tx Interval of IPv6 BFD control packet in this interface. default: 50(ms)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 50..1000  

sleBFDIfControlDetectMultiIPv6 1.3.6.1.4.1.6296.101.11.10.2.2.12
Detect Multi value of IPv6 BFD control packet in this interface. default: 3
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..50  

sleBFDInterfaceNotification 1.3.6.1.4.1.6296.101.11.10.2.3
OBJECT IDENTIFIER    

sleBFDIfProfileChanged 1.3.6.1.4.1.6296.101.11.10.2.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBFDSession 1.3.6.1.4.1.6296.101.11.10.3
OBJECT IDENTIFIER    

sleBFDSessionInfo 1.3.6.1.4.1.6296.101.11.10.3.1
OBJECT IDENTIFIER    

sleBFDSessionInfoTable 1.3.6.1.4.1.6296.101.11.10.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleBFDSessionInfoEntry

sleBFDSessionInfoEntry 1.3.6.1.4.1.6296.101.11.10.3.1.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleBFDSessionInfoEntry  

sleBFDSessionNeighAddrType 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.1
Type of Neighbor Address referred to this session
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

sleBFDSessionNeighAddrValue 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.2
Value of Neighbor Address referred to this session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

sleBFDSessionRegProtocols 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.3
Value of Neighbor Address referred to this session.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ospfv2(0), ospfv3(1), vrrp4(2), vrrp6(3), staticroute4(4), staticroute6(5), bgp(6)  

sleBFDSessionLocalDiscr 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.4
Discriminator of this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionRemoteDiscr 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.5
Discriminator of remote session neighboring this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionDetecMultiplier 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.6
Detect Multiplier value which this session used. default: 3
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

sleBFDSessionStatus 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.7
Status of this session. AdminDown(0) is same as disabled(4).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adminDown(0), down(1), init(2), up(3), disabled(4)  

sleBFDSessionEchoUsage 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.8
Determine whether this session use or not echo function.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notUsing(0), using(1)  

sleBFDSessionUptime 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.9
The time since this session's status changed into Up'.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleBFDSessionStats 1.3.6.1.4.1.6296.101.11.10.3.2
OBJECT IDENTIFIER    

sleBFDSessionStatsTable 1.3.6.1.4.1.6296.101.11.10.3.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleBFDSessionStatsEntry

sleBFDSessionStatsEntry 1.3.6.1.4.1.6296.101.11.10.3.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleBFDSessionStatsEntry  

sleBFDSessionStatsHolddownTime 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.1
Type of Neighbor Address referred to this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsHolddownExpires 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.2
The time remaining before this entry change into down status without receiving hello in unit of milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsHolddownHitCount 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.3
Hit Count whose this session status chang into down.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsHelloTime 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.4
The time is when it expects next hello, after receiving that in unit of milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsHelloHitCount 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.5
Hit Count whose this session received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsRxCount 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.6
Hit Count whose this session received control packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsRxAvgInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.7
Average interval whose this session received control packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsRxMinInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.8
Minimum interval whose this session received control packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsRxMaxInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.9
Maximum interval whose this session received control packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsTxCount 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.10
Hit Count whose this session send control packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsTxAvgInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.11
Average interval whose this session sent control packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsTxMinInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.12
Minimum interval whose this session sent control packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsTxMaxInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.13
Maximum interval whose this session received control packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsEchoRxCount 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.14
Hit Count whose this session received echo packet
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsEchoRxAvgInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.15
Average interval whose this session received echo packet
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsEchoRxMinInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.16
Minimum interval whose this session received echo packet
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsEchoRxMaxInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.17
Maximum interval whose this session received echo packet
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsEchoTxCount 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.18
Hit Count whose this session send echo packet
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsEchoTxAvgInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.19
Average interval whose this session sent echo packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsEchoTxMinInterva 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.20
Minimum interval whose this session sent echo packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionStatsEchoTxMaxInterval 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.21
Maximum interval whose this session received echo packet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionLocal 1.3.6.1.4.1.6296.101.11.10.3.3
OBJECT IDENTIFIER    

sleBFDSessionLocalTable 1.3.6.1.4.1.6296.101.11.10.3.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleBFDSessionLocalEntry

sleBFDSessionLocalEntry 1.3.6.1.4.1.6296.101.11.10.3.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleBFDSessionLocalEntry  

sleBFDSessionLocalDiag 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.1
Value of State field of this session's control packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noDiag(0), detectExpired(1), echoFailed(2), neighDownAlarm(3), fwdPlaneReset(4), pathDown(5), concatPathDown(6), adminDown(7), reverseConcatDown(8), reserved(9)  

sleBFDSessionLocalState 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.2
Value of Diag field of this session's control packet
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adminDown(0), donw(1), init(2), up(3)  

sleBFDSessionLocalFlags 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.3
Value of Flags field of this session's control packet.
Status: current Access: read-only
OBJECT-TYPE    
  BITS poll(0), final(1), controlIndependent(2), authPresent(3), demand(4), multipoint(5)  

sleBFDSessionLocalMultiplier 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.4
Value of MinTxInterval field of this session's control packet in unit of microseconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

sleBFDSessionLocalMinTxInterval 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.5
Value of MinTxInterval field of this session's control packet in unit of microseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionLocalMinRxInterval 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.6
Value of MinRxInterval field of this session's control packet in unit of microseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionLocalMinEchoInterval 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.7
Value of MinEchoInterval field of this session's control packet in unit of microseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionRemote 1.3.6.1.4.1.6296.101.11.10.3.4
OBJECT IDENTIFIER    

sleBFDSessionRemoteTable 1.3.6.1.4.1.6296.101.11.10.3.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleBFDSessionRemoteEntry

sleBFDSessionRemoteEntry 1.3.6.1.4.1.6296.101.11.10.3.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleBFDSessionRemoteEntry  

sleBFDSessionRemoteDiag 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.1
Value of State field of remote session's control packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noDiag(0), detectExpired(1), echoFailed(2), neighDownAlarm(3), fwdPlaneReset(4), pathDown(5), concatPathDown(6), adminDown(7), reverseConcatDown(8), reserved(9)  

sleBFDSessionRemoteState 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.2
Value of Diag field of remote session's control packet
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adminDown(0), donw(1), init(2), up(3)  

sleBFDSessionremoteFlags 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.3
Value of Flags field of remote session's control packet.
Status: current Access: read-only
OBJECT-TYPE    
  BITS poll(0), final(1), controlIndependent(2), authPresent(3), demand(4), multipoint(5)  

sleBFDSessionRemoteMultiplier 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.4
Value of MinTxInterval field of this session's control packet in unit of microseconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

sleBFDSessionRemoteMinTxInterval 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.5
Value of MinTxInterval field of remote session's control packet in unit of microseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionRemoteMinRxInterval 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.6
Value of MinRxInterval field of remote session's control packet in unit of microseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDSessionRemoteMinEchoInterval 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.7
Value of MinEchoInterval field of remote session's control packet in unit of microseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleBFDStaticGw 1.3.6.1.4.1.6296.101.11.10.4
OBJECT IDENTIFIER    

sleBFDStaticGwTable 1.3.6.1.4.1.6296.101.11.10.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleBFDStaticGwEntry

sleBFDStaticGwEntry 1.3.6.1.4.1.6296.101.11.10.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleBFDStaticGwEntry  

sleBFDStaticGwAddrType 1.3.6.1.4.1.6296.101.11.10.4.1.1.1
The BFD static Gateway address type. Only ipv4(1).
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleBFDStaticGwAddr 1.3.6.1.4.1.6296.101.11.10.4.1.1.2
The BFD static Gateway address. 4bytes
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleBFDStaticGwControl 1.3.6.1.4.1.6296.101.11.10.4.2
OBJECT IDENTIFIER    

sleBFDStaticGwControlRequest 1.3.6.1.4.1.6296.101.11.10.4.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER addBfdStaticGw(1), delBfdStaticGw(2)  

sleBFDStaticGwControlStatus 1.3.6.1.4.1.6296.101.11.10.4.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleBFDStaticGwControlTimer 1.3.6.1.4.1.6296.101.11.10.4.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleBFDStaticGwControlTimeStamp 1.3.6.1.4.1.6296.101.11.10.4.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleBFDStaticGwControlReqResult 1.3.6.1.4.1.6296.101.11.10.4.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleBFDStaticGwControlNetIfIndex 1.3.6.1.4.1.6296.101.11.10.4.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleBFDStaticGwControlGwAddrType 1.3.6.1.4.1.6296.101.11.10.4.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleBFDStaticGwControlGwAddr 1.3.6.1.4.1.6296.101.11.10.4.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleBFDStaticGwNotification 1.3.6.1.4.1.6296.101.11.10.4.3
OBJECT IDENTIFIER    

sleBFDStaticGwAdded 1.3.6.1.4.1.6296.101.11.10.4.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBFDStaticGwDeleted 1.3.6.1.4.1.6296.101.11.10.4.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNetworkGroup 1.3.6.1.4.1.6296.101.11.14
Description.
Status: current Access: read-write
OBJECT-GROUP    

sleNetworkNotificationGroup 1.3.6.1.4.1.6296.101.11.15
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor