SLE-QOS-MIB

File: SLE-QOS-MIB.mib (90922 bytes)

Imported modules

DASAN-SMI SLE-TC-MIB SNMPv2-CONF
SNMPv2-SMI

Imported symbols

sleMgmt SleControlRequestResultType SleControlStatusType
OBJECT-GROUP NOTIFICATION-GROUP TimeTicks
IpAddress Integer32 Unsigned32
Gauge32 Counter32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE

Defined Types

SleTrafficProfileControlRequestType  
INTEGER setTrafficProfile(1)    

SleUserFlowMatchType  
BITS ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufDscp(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16)    

SleUserFlowActionType  
BITS ufActPermit(0), ufActCopyCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4)    

SleBooleanType  
INTEGER disable(0), enable(1)    

SlePortScheduleControlRequestType  
INTEGER setPortScheduleMode(1)    

SleQueueControlRequestType  
INTEGER setQueueProfile(1)    

SleUserFlowControlRequestType  
INTEGER createUserFlow(1), destroyUserFlow(2), setUserFlowClassifierProfile(3), setUserFlowMatchActionProfile(4), setUserFlowNomatchActionProfile(5)    

SleTrafficProfileEntry  
SEQUENCE    
  sleTrafficProfileIndex Unsigned32
  sleTrafficProfileMinBandwidth Integer32
  sleTrafficProfileMaxBandwidth Integer32
  sleTrafficProfileMaxBurstSize Integer32
  sleTrafficProfileUseCount Integer32

SleUserFlowEntry  
SEQUENCE    
  sleUserFlowName OCTET STRING
  sleUserFlowIngressPorts OCTET STRING
  sleUserFlowEgressPorts OCTET STRING
  sleUserFlowEthernetType Integer32
  sleUserFlowSrcMacAddr OCTET STRING
  sleUserFlowDstMacAddr OCTET STRING
  sleUserFlowVlan Integer32
  sleUserFlow8021p Integer32
  sleUserFlowSrcIpAddr IpAddress
  sleUserFlowSrcPrefixLength Integer32
  sleUserFlowDstIpAddr IpAddress
  sleUserFlowDstPrefixLength Integer32
  sleUserFlowIpPktPriorityType INTEGER
  sleUserFlowIpPktPriority Integer32
  sleUserFlowProtocolType Integer32
  sleUserFlowTcpFlag BITS
  sleUserFlowSrcL4Port Integer32
  sleUserFlowDstL4Port Integer32
  sleUserFlowPktLen Integer32
  sleUserFlowValidFlags BITS
  sleUserFlowMatchFlags BITS
  sleUserFlowPriority INTEGER
  sleUserFlowMatchCounterId Integer32
  sleUserFlowMatchTrafficProfileId Integer32
  sleUserFlowMatchQueue Integer32
  sleUserFlowMatchIpPktPriorityType INTEGER
  sleUserFlowMatchIpPktPriority Integer32
  sleUserFlowMatchRedirPort Integer32
  sleUserFlowMatchVid Integer32
  sleUserFlowMatchDstMac OCTET STRING
  sleUserFlowMatchPortMap OCTET STRING
  sleUserFlowMatchEgressType INTEGER
  sleUserFlowMatchAction BITS
  sleUserFlowNomatchCounterId Integer32
  sleUserFlowNomatchTrafficProfileId Integer32
  sleUserFlowNomatchQueue Integer32
  sleUserFlowNomatchIpPktPriorityType INTEGER
  sleUserFlowNomatchIpPktPriority Integer32
  sleUserFlowNomatchRedirPort Integer32
  sleUserFlowNomatchVid Integer32
  sleUserFlowNomatchAction BITS
  sleUserFlowMatchColorMarkingId Integer32
  sleUserFlowNomatchColorMarkingId Integer32
  sleUserFlowInnerVlan Integer32
  sleUserFlowInner8021p Integer32
  sleUserFlowMatchRoutePrimary IpAddress
  sleUserFlowMatchRouteSecondary IpAddress

SlePortSchedultEntry  
SEQUENCE    
  slePortSchedulInterfaceIndex Integer32
  slePortScheduleMode INTEGER

SleQueueEntry  
SEQUENCE    
  sleQueueId Integer32
  sleQueueREDEnable INTEGER
  sleQueueMappedCoS BITS
  sleQueueWREDMinThreshold Integer32
  sleQueueWREDMaxThreshold Integer32
  sleQueueWREDProbMax Integer32
  sleQueueMinBandwidth Integer32
  sleQueueMaxBandwidth Integer32
  sleQueueWeight Integer32
  sleQueueMaxLatency Integer32
  sleQueueMaxPackets Integer32
  sleQueueQuantum INTEGER
  sleQueueUsedPkts Counter32
  sleQueueUsedBytes Counter32

SleCounterEntry  
SEQUENCE    
  sleCounterIndex INTEGER
  sleCounterPackets Unsigned32

SleColorMarkingEntry  
SEQUENCE    
  sleColorMarkingIndex INTEGER
  sleColorMarkingType INTEGER
  sleColorMarkingMode INTEGER
  sleColorMarkingAwareMode INTEGER
  sleColorMarkingCIR Integer32
  sleColorMarkingCBS Integer32
  sleColorMarkingPIR Integer32
  sleColorMarkingPBS Integer32
  sleColorMarkingEBS Integer32
  sleColorMarkingRedAction BITS
  sleColorMarkingYellowAction BITS
  sleColorMarkingGreenAction BITS
  sleColorMarkingRedDscp Integer32
  sleColorMarkingYellowDscp Integer32
  sleColorMarkingGreenDscp Integer32
  sleColorMarkingUseCount Integer32

Defined Values

sleQoS 1.3.6.1.4.1.6296.101.10
Description.
MODULE-IDENTITY    

sleQoSBase 1.3.6.1.4.1.6296.101.10.1
OBJECT IDENTIFIER    

sleQoSBaseInfo 1.3.6.1.4.1.6296.101.10.1.1
OBJECT IDENTIFIER    

sleQosUserFlowNum 1.3.6.1.4.1.6296.101.10.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleQosTrafficProfileNum 1.3.6.1.4.1.6296.101.10.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleQosCounterNum 1.3.6.1.4.1.6296.101.10.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleQosQueueNum 1.3.6.1.4.1.6296.101.10.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleQosColorMarkingProfileNum 1.3.6.1.4.1.6296.101.10.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleQosRuleMode 1.3.6.1.4.1.6296.101.10.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), extension(1)  

sleQoSBaseControl 1.3.6.1.4.1.6296.101.10.1.2
OBJECT IDENTIFIER    

sleQoSBaseControlRequest 1.3.6.1.4.1.6296.101.10.1.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setQoSBaseRuleMode(1)  

sleQoSBaseControlStatus 1.3.6.1.4.1.6296.101.10.1.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleQoSBaseControlTimer 1.3.6.1.4.1.6296.101.10.1.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleQoSBaseControlTimeStamp 1.3.6.1.4.1.6296.101.10.1.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleQoSBaseControlReqResult 1.3.6.1.4.1.6296.101.10.1.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleQoSBaseControlRuleMode 1.3.6.1.4.1.6296.101.10.1.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), extension(1)  

sleQoSBaseNotification 1.3.6.1.4.1.6296.101.10.1.3
OBJECT IDENTIFIER    

sleQoSBaseRuleModeChanged 1.3.6.1.4.1.6296.101.10.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTrafficProfile 1.3.6.1.4.1.6296.101.10.2
OBJECT IDENTIFIER    

sleTrafficProfileTable 1.3.6.1.4.1.6296.101.10.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleTrafficProfileEntry

sleTrafficProfileEntry 1.3.6.1.4.1.6296.101.10.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleTrafficProfileEntry  

sleTrafficProfileIndex 1.3.6.1.4.1.6296.101.10.2.1.1.1
meter Index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

sleTrafficProfileMinBandwidth 1.3.6.1.4.1.6296.101.10.2.1.1.2
The value is in unit for 64 kbps
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleTrafficProfileMaxBandwidth 1.3.6.1.4.1.6296.101.10.2.1.1.3
The value is in unit for 64 kbps
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleTrafficProfileMaxBurstSize 1.3.6.1.4.1.6296.101.10.2.1.1.4
The size of the bucket used for metering
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleTrafficProfileUseCount 1.3.6.1.4.1.6296.101.10.2.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleTrafficProfileControl 1.3.6.1.4.1.6296.101.10.2.2
OBJECT IDENTIFIER    

sleTrafficProfileControlRequest 1.3.6.1.4.1.6296.101.10.2.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleTrafficProfileControlRequestType  

sleTrafficProfileControlStatus 1.3.6.1.4.1.6296.101.10.2.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleTrafficProfileControlTimer 1.3.6.1.4.1.6296.101.10.2.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleTrafficProfileControlTimeStamp 1.3.6.1.4.1.6296.101.10.2.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleTrafficProfileControlReqResult 1.3.6.1.4.1.6296.101.10.2.2.5
Result of last command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleTrafficProfileControlIndex 1.3.6.1.4.1.6296.101.10.2.2.6
meter Index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleTrafficProfileControlMinBandwidth 1.3.6.1.4.1.6296.101.10.2.2.7
The value is in unit for 64 kbps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleTrafficProfileControlMaxBandwidth 1.3.6.1.4.1.6296.101.10.2.2.8
The value is in unit for 64 kbps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleTrafficProfileControlMaxBurstSize 1.3.6.1.4.1.6296.101.10.2.2.9
The size of the bucket used for metering
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleTrafficProfileNotification 1.3.6.1.4.1.6296.101.10.2.3
OBJECT IDENTIFIER    

sleTrafficProfileChanged 1.3.6.1.4.1.6296.101.10.2.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleUserFlow 1.3.6.1.4.1.6296.101.10.3
OBJECT IDENTIFIER    

sleUserFlowTable 1.3.6.1.4.1.6296.101.10.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleUserFlowEntry

sleUserFlowEntry 1.3.6.1.4.1.6296.101.10.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleUserFlowEntry  

sleUserFlowName 1.3.6.1.4.1.6296.101.10.3.1.1.1
The name of this user flow.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..63)  

sleUserFlowIngressPorts 1.3.6.1.4.1.6296.101.10.3.1.1.2
Ingress port number
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleUserFlowEgressPorts 1.3.6.1.4.1.6296.101.10.3.1.1.3
Egress Port Number
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleUserFlowEthernetType 1.3.6.1.4.1.6296.101.10.3.1.1.4
The ethernet type value in incoming frames
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleUserFlowSrcMacAddr 1.3.6.1.4.1.6296.101.10.3.1.1.5
Source MAC address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sleUserFlowDstMacAddr 1.3.6.1.4.1.6296.101.10.3.1.1.6
Destination MAC address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

sleUserFlowVlan 1.3.6.1.4.1.6296.101.10.3.1.1.7
VLAN ID
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4094  

sleUserFlow8021p 1.3.6.1.4.1.6296.101.10.3.1.1.8
The value of the IEEE802.1p priority in the packet
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

sleUserFlowSrcIpAddr 1.3.6.1.4.1.6296.101.10.3.1.1.9
The IP address to match against the packet's source IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleUserFlowSrcPrefixLength 1.3.6.1.4.1.6296.101.10.3.1.1.10
Subnet mask. The length of 0 indicates a match of any address
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..31  

sleUserFlowDstIpAddr 1.3.6.1.4.1.6296.101.10.3.1.1.11
The IP address to match against the packet's destination IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleUserFlowDstPrefixLength 1.3.6.1.4.1.6296.101.10.3.1.1.12
Subnet mask. The length of 0 indicates a match of any address
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..32  

sleUserFlowIpPktPriorityType 1.3.6.1.4.1.6296.101.10.3.1.1.13
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipPrecedence(1), diffServ(2), ipToS(3)  

sleUserFlowIpPktPriority 1.3.6.1.4.1.6296.101.10.3.1.1.14
The Priority value in incoming IP packet. If sleUserFlowIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowIpPktPriorityType is 3, this value's range is 0-255.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

sleUserFlowProtocolType 1.3.6.1.4.1.6296.101.10.3.1.1.15
The IP protocol type value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

sleUserFlowTcpFlag 1.3.6.1.4.1.6296.101.10.3.1.1.16
TCP Flags
Status: current Access: read-only
OBJECT-TYPE    
  BITS reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)  

sleUserFlowSrcL4Port 1.3.6.1.4.1.6296.101.10.3.1.1.17
The source L4 port number, only valid for TCP or UDP packets.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleUserFlowDstL4Port 1.3.6.1.4.1.6296.101.10.3.1.1.18
The destination L4 port number, only valid for TCP or UDP packets.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleUserFlowPktLen 1.3.6.1.4.1.6296.101.10.3.1.1.19
The packet length of the incoming packet
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 21..65535  

sleUserFlowValidFlags 1.3.6.1.4.1.6296.101.10.3.1.1.20
User Flow Valid Flags
Status: current Access: read-only
OBJECT-TYPE    
  BITS ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17), ufInnerVlanId(18), ufInner8021p(19)  

sleUserFlowMatchFlags 1.3.6.1.4.1.6296.101.10.3.1.1.21
User Flow Matching Flags
Status: current Access: read-only
OBJECT-TYPE    
  BITS ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17)  

sleUserFlowPriority 1.3.6.1.4.1.6296.101.10.3.1.1.22
The priority of this user flow
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), highest(4)  

sleUserFlowMatchCounterId 1.3.6.1.4.1.6296.101.10.3.1.1.23
The counter index to be apply for the matched packets.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowMatchTrafficProfileId 1.3.6.1.4.1.6296.101.10.3.1.1.24
The traffic profile index to be apply for the matched packets.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowMatchQueue 1.3.6.1.4.1.6296.101.10.3.1.1.25
TThe CoS value to be assign for the nomatched packets
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

sleUserFlowMatchIpPktPriorityType 1.3.6.1.4.1.6296.101.10.3.1.1.26
The Priority type to be applied to incoming IP packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipPrecedence(1), diffServ(2), ipToS(3)  

sleUserFlowMatchIpPktPriority 1.3.6.1.4.1.6296.101.10.3.1.1.27
The Priority value in incoming IP packet. If sleUserFlowMatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowMatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowMatchIpPktPriorityType is 3, then this value's range is 0-255.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowMatchRedirPort 1.3.6.1.4.1.6296.101.10.3.1.1.28
The port to redirect to a matched packet.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowMatchVid 1.3.6.1.4.1.6296.101.10.3.1.1.29
The vlan id to be assigned for the matched packets
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4096  

sleUserFlowMatchDstMac 1.3.6.1.4.1.6296.101.10.3.1.1.30
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleUserFlowMatchPortMap 1.3.6.1.4.1.6296.101.10.3.1.1.31
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleUserFlowMatchEgressType 1.3.6.1.4.1.6296.101.10.3.1.1.32
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dmac(0), egressPorts(1), filterPorts(2)  

sleUserFlowMatchAction 1.3.6.1.4.1.6296.101.10.3.1.1.33
The action to be apply for matched packets.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12), ufActColorMarking(13), ufActRoute(14), ufActRouteReachability(15)  

sleUserFlowNomatchCounterId 1.3.6.1.4.1.6296.101.10.3.1.1.34
The counter index to be apply for the nomatched packets.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowNomatchTrafficProfileId 1.3.6.1.4.1.6296.101.10.3.1.1.35
The traffic profile index to be apply for the nomatched packets.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowNomatchQueue 1.3.6.1.4.1.6296.101.10.3.1.1.36
The CoS value to be assign for the nomatched packets
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

sleUserFlowNomatchIpPktPriorityType 1.3.6.1.4.1.6296.101.10.3.1.1.37
The Priority type to be applied to incoming IP packet, in case nomatched.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipPrecedence(1), diffServ(2), ipToS(3)  

sleUserFlowNomatchIpPktPriority 1.3.6.1.4.1.6296.101.10.3.1.1.38
The Priority value in incoming IP packet. If sleUserFlowNomatchIpPktPriorityType is 1, then this value's range is 0-7. If sleUserFlowNomatchIpPktPriorityType is 2, then this value's range is 0-63. If sleUserFlowNomatchIpPktPriorityType is 3, then this value's range is 0-255.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowNomatchRedirPort 1.3.6.1.4.1.6296.101.10.3.1.1.39
The port to redirect to nomatched packet.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowNomatchVid 1.3.6.1.4.1.6296.101.10.3.1.1.40
The vlan id to be assigned for the nomatched packets
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4096  

sleUserFlowNomatchAction 1.3.6.1.4.1.6296.101.10.3.1.1.41
The action to be apply for nomatched packets.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12)  

sleUserFlowMatchColorMarkingId 1.3.6.1.4.1.6296.101.10.3.1.1.42
The colormarking profile index to be apply for the matched packet.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowNomatchColorMarkingId 1.3.6.1.4.1.6296.101.10.3.1.1.43
The colormarking profile index to be apply for the unmatched packet. (not supported)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleUserFlowInnerVlan 1.3.6.1.4.1.6296.101.10.3.1.1.44
Inner VLAN ID in QinQ
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

sleUserFlowInner8021p 1.3.6.1.4.1.6296.101.10.3.1.1.45
The value of the inner IEEE802.1p priority in the packet
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

sleUserFlowMatchRoutePrimary 1.3.6.1.4.1.6296.101.10.3.1.1.46
The policy-based-routing primary route
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleUserFlowMatchRouteSecondary 1.3.6.1.4.1.6296.101.10.3.1.1.47
The policy-based-routing secondary route
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleUserFlowControl 1.3.6.1.4.1.6296.101.10.3.2
OBJECT IDENTIFIER    

sleUserFlowControlReqest 1.3.6.1.4.1.6296.101.10.3.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleUserFlowControlRequestType  

sleUserFlowControlStatus 1.3.6.1.4.1.6296.101.10.3.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleUserFlowControlTimer 1.3.6.1.4.1.6296.101.10.3.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleUserFlowControlTimeStamp 1.3.6.1.4.1.6296.101.10.3.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleUserFlowControlReqResult 1.3.6.1.4.1.6296.101.10.3.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleUserFlowControlName 1.3.6.1.4.1.6296.101.10.3.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..63)  

sleUserFlowControlIngressPorts 1.3.6.1.4.1.6296.101.10.3.2.7
Ingress port
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleUserFlowControlEgressPorts 1.3.6.1.4.1.6296.101.10.3.2.8
Egress port
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleUserFlowControlEthernetType 1.3.6.1.4.1.6296.101.10.3.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleUserFlowControlSrcMacAddr 1.3.6.1.4.1.6296.101.10.3.2.10
Source MAC address
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sleUserFlowControlDstMacAddr 1.3.6.1.4.1.6296.101.10.3.2.11
Destination MAC address
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

sleUserFlowControlVlan 1.3.6.1.4.1.6296.101.10.3.2.12
Vlan ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4096  

sleUserFlowControl8021p 1.3.6.1.4.1.6296.101.10.3.2.13
The value of the IEEE802.1p priority in the packet
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sleUserFlowControlSrcIpAddr 1.3.6.1.4.1.6296.101.10.3.2.14
The IP address to match against the packet's source IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleUserFlowControlSrcPrefixLength 1.3.6.1.4.1.6296.101.10.3.2.15
Subnet mask. The length of 0 indicates a match of any address
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlDstIpAddr 1.3.6.1.4.1.6296.101.10.3.2.16
The IP address to match against the packet's destination IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleUserFlowControlDstPrefixLength 1.3.6.1.4.1.6296.101.10.3.2.17
Subnet mask. The length of 0 indicates a match of any address
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlIpPktPriorityType 1.3.6.1.4.1.6296.101.10.3.2.18
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipPrecedence(1), diffServ(2), ipToS(3)  

sleUserFlowControlIpPktPriority 1.3.6.1.4.1.6296.101.10.3.2.19
The Priority value in incoming IP packet. If sleUserFlowControlIpPktPriorityType is 1, this value's range is 0-7. If sleUserFlowControlIpPktPriorityType is 2, this value's range is 0-63. If sleUserFlowControlIpPktPriorityType is 3, this value's range is 0-255.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlProtocolType 1.3.6.1.4.1.6296.101.10.3.2.20
The IP protocol type value
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sleUserFlowControlTcpFlag 1.3.6.1.4.1.6296.101.10.3.2.21
Description.
Status: current Access: read-write
OBJECT-TYPE    
  BITS reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)  

sleUserFlowControlSrcL4Port 1.3.6.1.4.1.6296.101.10.3.2.22
The source L4 port number, only valid for TCP or UDP packets.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleUserFlowControlDstL4Port 1.3.6.1.4.1.6296.101.10.3.2.23
The destination L4 port number, only valid for TCP or UDP packets.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleUserFlowControlPktLen 1.3.6.1.4.1.6296.101.10.3.2.24
The packet length of the incoming packet
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 21..65535  

sleUserFlowControlValidFlag 1.3.6.1.4.1.6296.101.10.3.2.25
The ICMP type, only valid for ICMP packets.
Status: current Access: read-write
OBJECT-TYPE    
  BITS ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17), ufInnerVlanId(18), ufInner8021p(19)  

sleUserFlowControlMatchFlag 1.3.6.1.4.1.6296.101.10.3.2.26
The ICMP code, only valid for ICMP packets.
Status: current Access: read-write
OBJECT-TYPE    
  BITS ufIngressPort(0), ufEgressPort(1), ufEthernetType(2), ufSrcMacAddress(3), ufDstMacAddress(4), ufVlanId(5), uf8021p(6), ufSrcIpAddress(7), ufSrcPrefixLength(8), ufDstIpAddress(9), ufDstPrefixLength(10), ufIpPktPriority(11), ufProtocolType(12), ufTcpFlag(13), ufSrcL4Port(14), ufDstL4Port(15), ufPacketLength(16), ufPriority(17)  

sleUserFlowControlPriority 1.3.6.1.4.1.6296.101.10.3.2.27
The priority of this user flow
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), highest(4)  

sleUserFlowControlMatchCounterId 1.3.6.1.4.1.6296.101.10.3.2.28
The counter index to be apply for the matched packets.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlMatchTrafficProfileId 1.3.6.1.4.1.6296.101.10.3.2.29
The traffic profile index to be apply for the matched packets.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlMatchQueue 1.3.6.1.4.1.6296.101.10.3.2.30
The CoS value to be assign for the matched packets
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sleUserFlowControlMatchIpPktPriorityType 1.3.6.1.4.1.6296.101.10.3.2.31
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipPrecedence(1), diffServ(2), ipToS(3)  

sleUserFlowControlMatchIpPktPriority 1.3.6.1.4.1.6296.101.10.3.2.32
The Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlMatchRedirPort 1.3.6.1.4.1.6296.101.10.3.2.33
The port to redirect to a matched packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlMatchVid 1.3.6.1.4.1.6296.101.10.3.2.34
The vlan id to be assigned for the matched packets
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4096  

sleUserFlowControlMatchDstMac 1.3.6.1.4.1.6296.101.10.3.2.35
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleUserFlowControlMatchPortMap 1.3.6.1.4.1.6296.101.10.3.2.36
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleUserFlowControlMatchEgressType 1.3.6.1.4.1.6296.101.10.3.2.37
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dmac(0), egressPorts(1), filterPorts(2)  

sleUserFlowControlMatchAction 1.3.6.1.4.1.6296.101.10.3.2.38
The action to be apply for matched packets.
Status: current Access: read-write
OBJECT-TYPE    
  BITS ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12), ufActColorMarking(13), ufActRoute(14), ufActRouteReachability(15)  

sleUserFlowControlNomatchCounterId 1.3.6.1.4.1.6296.101.10.3.2.39
The counter index to be apply for the unmatched packets.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlNomatchTrafficProfileId 1.3.6.1.4.1.6296.101.10.3.2.40
The traffic profile index to be apply for the unmatched packets.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlNomatchQueue 1.3.6.1.4.1.6296.101.10.3.2.41
The CoS value to be assign for the unmatched packets
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sleUserFlowControlNomatchIpPktPriorityType 1.3.6.1.4.1.6296.101.10.3.2.42
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipPrecedence(1), diffServ(2), ipToS(3)  

sleUserFlowControlNomatchIpPktPriority 1.3.6.1.4.1.6296.101.10.3.2.43
The Priority value in incoming IP packet. If type is 1, then this value's range is 0-7. If type is 2, then this value's range is 0-63. If type is 3, then this value's range is 0-255.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlNomatchRedirPort 1.3.6.1.4.1.6296.101.10.3.2.44
The port to redirect a unmatched packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlNomatchVid 1.3.6.1.4.1.6296.101.10.3.2.45
The vlan id to be assigned for the unmatched packets
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4096  

sleUserFlowControlNomatchAction 1.3.6.1.4.1.6296.101.10.3.2.46
The action to be apply for unmatched packets.
Status: current Access: read-write
OBJECT-TYPE    
  BITS ufActDeny(0), ufActCopytoCpu(1), ufActSameAsTos(2), ufActSameAsCos(3), ufActMirror(4), ufActCounter(5), ufActTrafficeProfile(6), ufActQueue(7), ufActIpPktPriority(8), ufActRedirPort(9), ufAct8021p(10), ufActVid(11), ufActEgress(12)  

sleUserFlowControlMatchColorMarkingId 1.3.6.1.4.1.6296.101.10.3.2.47
The color marking profile index to be apply for the matched packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlNomatchColorMarkingId 1.3.6.1.4.1.6296.101.10.3.2.48
The color marking profile index to be apply for the nomatched packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleUserFlowControlInnerVlan 1.3.6.1.4.1.6296.101.10.3.2.49
Inner VLAN ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

sleUserFlowControlInner8021p 1.3.6.1.4.1.6296.101.10.3.2.50
The value of the Inner IEEE802.1p priority in the packet
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sleUserFlowControlMatchRoutePrimary 1.3.6.1.4.1.6296.101.10.3.2.51
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleUserFlowControlMatchRouteSecondary 1.3.6.1.4.1.6296.101.10.3.2.52
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleUserFlowNotification 1.3.6.1.4.1.6296.101.10.3.3
OBJECT IDENTIFIER    

sleUserFlowCreated 1.3.6.1.4.1.6296.101.10.3.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleUserFlowDestroyed 1.3.6.1.4.1.6296.101.10.3.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleUserFlowClassifierProfileChanged 1.3.6.1.4.1.6296.101.10.3.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleUserFlowMatchActionProfileChanged 1.3.6.1.4.1.6296.101.10.3.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleUserFlowNomatchActionProfileChanged 1.3.6.1.4.1.6296.101.10.3.3.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

slePortSchedule 1.3.6.1.4.1.6296.101.10.4
OBJECT IDENTIFIER    

slePortSchedultTable 1.3.6.1.4.1.6296.101.10.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlePortSchedultEntry

slePortSchedultEntry 1.3.6.1.4.1.6296.101.10.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SlePortSchedultEntry  

slePortSchedulInterfaceIndex 1.3.6.1.4.1.6296.101.10.4.1.1.1
Interface Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..256  

slePortScheduleMode 1.3.6.1.4.1.6296.101.10.4.1.1.2
The scheduling mode of port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER strictqueueing(1), wrr(2), wfq(3), rr(4), drr(5)  

slePortScheduleControl 1.3.6.1.4.1.6296.101.10.4.2
OBJECT IDENTIFIER    

slePortScheduleControlRequest 1.3.6.1.4.1.6296.101.10.4.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SlePortScheduleControlRequestType  

sleScheduleControlStatus 1.3.6.1.4.1.6296.101.10.4.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

slePortScheduleControlTimer 1.3.6.1.4.1.6296.101.10.4.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

slePortScheduleControlTimeStamp 1.3.6.1.4.1.6296.101.10.4.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

slePortScheduleControlReqResult 1.3.6.1.4.1.6296.101.10.4.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

slePortScheduleControlInterfaceIndex 1.3.6.1.4.1.6296.101.10.4.2.6
Interface Index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

slePortScheduleControlMode 1.3.6.1.4.1.6296.101.10.4.2.7
The scheduling mode of port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER strictqueueing(1), wrr(2), wfq(3), rr(4), drr(5)  

slePortScheduleNotification 1.3.6.1.4.1.6296.101.10.4.3
OBJECT IDENTIFIER    

slePortScheduleModeChanged 1.3.6.1.4.1.6296.101.10.4.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleQueue 1.3.6.1.4.1.6296.101.10.5
OBJECT IDENTIFIER    

sleQueueTable 1.3.6.1.4.1.6296.101.10.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleQueueEntry

sleQueueEntry 1.3.6.1.4.1.6296.101.10.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleQueueEntry  

sleQueueId 1.3.6.1.4.1.6296.101.10.5.1.1.1
queue index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

sleQueueREDEnable 1.3.6.1.4.1.6296.101.10.5.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleQueueMappedCoS 1.3.6.1.4.1.6296.101.10.5.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  BITS cos0(0), cos1(1), cos2(2), cos3(3), cos4(4), cos5(5), cos6(6), cos7(7)  

sleQueueWREDMinThreshold 1.3.6.1.4.1.6296.101.10.5.1.1.4
The total number of packets where WRED can start
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleQueueWREDMaxThreshold 1.3.6.1.4.1.6296.101.10.5.1.1.5
Above max threshold, queue drops all ingress
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleQueueWREDProbMax 1.3.6.1.4.1.6296.101.10.5.1.1.6
The worst case random drop probability
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..15  

sleQueueMinBandwidth 1.3.6.1.4.1.6296.101.10.5.1.1.7
The value is unit of 64kbps
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleQueueMaxBandwidth 1.3.6.1.4.1.6296.101.10.5.1.1.8
The value is unit of 64 kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleQueueWeight 1.3.6.1.4.1.6296.101.10.5.1.1.9
The weight of this queue. The value of -1 is unlimited
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1 | 1..255  

sleQueueMaxLatency 1.3.6.1.4.1.6296.101.10.5.1.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleQueueMaxPackets 1.3.6.1.4.1.6296.101.10.5.1.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleQueueQuantum 1.3.6.1.4.1.6296.101.10.5.1.1.12
The DRR quantum value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1 | 1..127  

sleQueueUsedPkts 1.3.6.1.4.1.6296.101.10.5.1.1.13
The used packets of port/queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleQueueUsedBytes 1.3.6.1.4.1.6296.101.10.5.1.1.14
The used bytes of port/queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleQueueControl 1.3.6.1.4.1.6296.101.10.5.2
OBJECT IDENTIFIER    

sleQueueControlRequest 1.3.6.1.4.1.6296.101.10.5.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setQueueProfile(1), setQuantum(2)  

sleQueueControlStatus 1.3.6.1.4.1.6296.101.10.5.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleQueueControlTimer 1.3.6.1.4.1.6296.101.10.5.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleQueueControlTimeStamp 1.3.6.1.4.1.6296.101.10.5.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleQueueControlReqResult 1.3.6.1.4.1.6296.101.10.5.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleQueueControlInterfaceIndex 1.3.6.1.4.1.6296.101.10.5.2.6
Interface Index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleQueueControlId 1.3.6.1.4.1.6296.101.10.5.2.7
Queue index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

sleQueueControlREDEnable 1.3.6.1.4.1.6296.101.10.5.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleQueueControlMappedCoS 1.3.6.1.4.1.6296.101.10.5.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  BITS cos0(0), cos1(1), cos2(2), cos3(3), cos4(4), cos5(5), cos6(6), cos7(7)  

sleQueueControlWREDMinThreshold 1.3.6.1.4.1.6296.101.10.5.2.10
The total number of packets where WRED can start
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleQueueControlWREDMaxThreshold 1.3.6.1.4.1.6296.101.10.5.2.11
Above max threshold, queue drops all ingress
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleQueueControlWREDProbMax 1.3.6.1.4.1.6296.101.10.5.2.12
The worst case random drop probability
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..15  

sleQueueControlMinBandwidth 1.3.6.1.4.1.6296.101.10.5.2.13
The value is unit of 64kbps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleQueueControlMaxBandwidth 1.3.6.1.4.1.6296.101.10.5.2.14
The value is unit of 64kbps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleQueueControlWeight 1.3.6.1.4.1.6296.101.10.5.2.15
The weight of this queue. The value of -1 is unlimited
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..255  

sleQueueControlMaxLatency 1.3.6.1.4.1.6296.101.10.5.2.16
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleQueueControlMaxPackets 1.3.6.1.4.1.6296.101.10.5.2.17
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleQueueControlQuantum 1.3.6.1.4.1.6296.101.10.5.2.18
The DRR quantum value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -1 | 1..127  

sleQueueNotification 1.3.6.1.4.1.6296.101.10.5.3
OBJECT IDENTIFIER    

sleQueueProfileChanged 1.3.6.1.4.1.6296.101.10.5.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleQueueQuantumChanged 1.3.6.1.4.1.6296.101.10.5.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleCounter 1.3.6.1.4.1.6296.101.10.6
OBJECT IDENTIFIER    

sleCounterTable 1.3.6.1.4.1.6296.101.10.6.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleCounterEntry

sleCounterEntry 1.3.6.1.4.1.6296.101.10.6.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleCounterEntry  

sleCounterIndex 1.3.6.1.4.1.6296.101.10.6.1.1.1
The Counter Index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

sleCounterPackets 1.3.6.1.4.1.6296.101.10.6.1.1.2
Number of packets
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleCounterControl 1.3.6.1.4.1.6296.101.10.6.2
OBJECT IDENTIFIER    

sleCounterControlRequest 1.3.6.1.4.1.6296.101.10.6.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearCounter(1)  

sleCounterControlStatus 1.3.6.1.4.1.6296.101.10.6.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleCounterControlTimer 1.3.6.1.4.1.6296.101.10.6.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleCounterControlTimeStamp 1.3.6.1.4.1.6296.101.10.6.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleCounterControlReqResult 1.3.6.1.4.1.6296.101.10.6.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleCounterControlIndex 1.3.6.1.4.1.6296.101.10.6.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32  

sleCounterNotification 1.3.6.1.4.1.6296.101.10.6.3
OBJECT IDENTIFIER    

sleCounterCleared 1.3.6.1.4.1.6296.101.10.6.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleColorMarking 1.3.6.1.4.1.6296.101.10.7
OBJECT IDENTIFIER    

sleColorMarkingTable 1.3.6.1.4.1.6296.101.10.7.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleColorMarkingEntry

sleColorMarkingEntry 1.3.6.1.4.1.6296.101.10.7.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleColorMarkingEntry  

sleColorMarkingIndex 1.3.6.1.4.1.6296.101.10.7.1.1.1
Color marking table index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2048  

sleColorMarkingType 1.3.6.1.4.1.6296.101.10.7.1.1.2
Color marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER srTCM(0), trTCM(1)  

sleColorMarkingMode 1.3.6.1.4.1.6296.101.10.7.1.1.3
Color marking mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER blind(0), aware(1)  

sleColorMarkingAwareMode 1.3.6.1.4.1.6296.101.10.7.1.1.4
Color marking aware mode. Used only when sleColorMarkingMode is aware.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unprotected(1), protected(2)  

sleColorMarkingCIR 1.3.6.1.4.1.6296.101.10.7.1.1.5
Committed Information Rate. The value is in unit for 64 kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..1000000  

sleColorMarkingCBS 1.3.6.1.4.1.6296.101.10.7.1.1.6
Committed Burst Size. The value is in unit for square of 2 bits.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4000  

sleColorMarkingPIR 1.3.6.1.4.1.6296.101.10.7.1.1.7
Peak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps. .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..1000000  

sleColorMarkingPBS 1.3.6.1.4.1.6296.101.10.7.1.1.8
Peak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4000  

sleColorMarkingEBS 1.3.6.1.4.1.6296.101.10.7.1.1.9
Excess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4000  

sleColorMarkingRedAction 0.1.3.6.1.4.1.6296.101.10.7.1.1.10
The action to be apply when incoming packet is colored in red.
Status: current Access: read-only
OBJECT-TYPE    
  BITS reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)  

sleColorMarkingYellowAction 0.1.3.6.1.4.1.6296.101.10.7.1.1.11
The action to be apply when incoming packet is colored in yellow.
Status: current Access: read-only
OBJECT-TYPE    
  BITS reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)  

sleColorMarkingGreenAction 6.1.3.6.1.4.1.6296.101.10.7.1.1.12
The action to be apply when incoming packet is colored in green. (not supported)
Status: current Access: read-only
OBJECT-TYPE    
  BITS reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)  

sleColorMarkingRedDscp 1.3.6.1.4.1.6296.101.10.7.1.1.13
The dscp value to be apply when incoming packet is colored in red.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

sleColorMarkingYellowDscp 1.3.6.1.4.1.6296.101.10.7.1.1.14
The dscp value to be apply when incoming packet is colored in yellow.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

sleColorMarkingGreenDscp 1.3.6.1.4.1.6296.101.10.7.1.1.15
The dscp value to be apply when incoming packet is colored in green. (not supported)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

sleColorMarkingUseCount 1.3.6.1.4.1.6296.101.10.7.1.1.16
The number of rules used this color marking profile.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleColorMarkingControl 1.3.6.1.4.1.6296.101.10.7.2
OBJECT IDENTIFIER    

sleColorMarkingControlReqest 1.3.6.1.4.1.6296.101.10.7.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setColorMarkingProfile(1)  

sleColorMarkingControlStatus 1.3.6.1.4.1.6296.101.10.7.2.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleControlStatusType  

sleColorMarkingControlTimer 1.3.6.1.4.1.6296.101.10.7.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleColorMarkingControlTimeStamp 1.3.6.1.4.1.6296.101.10.7.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleColorMarkingControlReqResult 1.3.6.1.4.1.6296.101.10.7.2.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleControlRequestResultType  

sleColorMarkingControlIndex 1.3.6.1.4.1.6296.101.10.7.2.6
Color marking table index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2048  

sleColorMarkingControlType 1.3.6.1.4.1.6296.101.10.7.2.7
Color marking type. srTCM = Single Rate Three Color Marking. trTCM = Two Rate Three Color Marking.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER srTCM(0), trTCM(1)  

sleColorMarkingControlMode 1.3.6.1.4.1.6296.101.10.7.2.8
Color marking mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER blind(0), aware(1)  

sleColorMarkingControlAwareMode 1.3.6.1.4.1.6296.101.10.7.2.9
Color marking aware mode. Used only when sleColorMarkingControlMode is aware.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unprotected(1), protected(2)  

sleColorMarkingControlCIR 1.3.6.1.4.1.6296.101.10.7.2.10
Committed Information Rate. The value is in unit for 64 kbps
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000000  

sleColorMarkingControlCBS 1.3.6.1.4.1.6296.101.10.7.2.11
Committed Burst Size. The value is in unit for square of 2 bits.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4000  

sleColorMarkingControlPIR 1.3.6.1.4.1.6296.101.10.7.2.12
Peak Information Rate. *) Used only when sleColorMarkingMode is Aware. The value is in unit for 64 kbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000000  

sleColorMarkingControlPBS 1.3.6.1.4.1.6296.101.10.7.2.13
Peak Burst Size. *) Used only when sleColorMarkingMode is Aware. The value is in unit for square of 2 bits.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4000  

sleColorMarkingControlEBS 1.3.6.1.4.1.6296.101.10.7.2.14
Excess Burst Size. *) Used only when sleColorMarkingMode is Blind. The value is in unit for square of 2 bits.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4000  

sleColorMarkingControlRedAction 0.1.3.6.1.4.1.6296.101.10.7.2.15
The action to be apply when incoming packet is colored in red.
Status: current Access: read-write
OBJECT-TYPE    
  BITS reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)  

sleColorMarkingControlYellowAction 0.1.3.6.1.4.1.6296.101.10.7.2.16
The action to be apply when incoming packet is colored in yellow.
Status: current Access: read-write
OBJECT-TYPE    
  BITS reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)  

sleColorMarkingControlGreenAction 6.1.3.6.1.4.1.6296.101.10.7.2.17
The action to be apply when incoming packet is colored in green. (not supported)
Status: current Access: read-write
OBJECT-TYPE    
  BITS reserve0(0), reserve1(1), reserve2(2), reserve3(3), reserve4(4), dropProcedence(5), marking(6), drop(7), dropPrecedenceGreen(8), dropPrecedenceYellow(9), dropPrecedenceRed(10)  

sleColorMarkingControlRedDscp 1.3.6.1.4.1.6296.101.10.7.2.18
The dscp value to be apply when incoming packet is colored in red.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

sleColorMarkingControlYellowDscp 1.3.6.1.4.1.6296.101.10.7.2.19
The dscp value to be apply when incoming packet is colored in yellow.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

sleColorMarkingControlGreenDscp 1.3.6.1.4.1.6296.101.10.7.2.20
The dscp value to be apply when incoming packet is colored in green. (not supported)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

sleColorMarkingNotification 1.3.6.1.4.1.6296.101.10.7.3
OBJECT IDENTIFIER    

sleColorMarkingProfileChanged 1.3.6.1.4.1.6296.101.10.7.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleQoSGroup 1.3.6.1.4.1.6296.101.10.8
Description.
Status: current Access: read-write
OBJECT-GROUP    

sleQoSControlGroup 1.3.6.1.4.1.6296.101.10.9
Description.
Status: current Access: read-write
OBJECT-GROUP    

sleQoSNotificationGroup 1.3.6.1.4.1.6296.101.10.11
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor