SLE-SECURITY-MIB

File: SLE-SECURITY-MIB.mib (226055 bytes)

Imported modules

DASAN-SMI IF-MIB INET-ADDRESS-MIB
SLE-TC-MIB SNMPv2-CONF SNMPv2-SMI
SNMPv2-TC

Imported symbols

sleMgmt InterfaceIndex InetAddressIPv6
SleControlStatusType SleControlRequestResultType SlePermissionType
OBJECT-GROUP NOTIFICATION-GROUP TimeTicks
IpAddress Integer32 Unsigned32
Gauge32 Counter32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE DateAndTime
TimeStamp MacAddress

Defined Types

SleAaaEntry  
SEQUENCE    
  sleAaaSession INTEGER
  sleAaaAuthen INTEGER
  sleAaaEnable INTEGER
  sleAaaPrimarySequence INTEGER

SleRadiusServerEntry  
SEQUENCE    
  sleRadiusServerAddress IpAddress
  sleRadiusServerClientKey OCTET STRING
  sleRadiusServerAuthPort INTEGER
  sleRadiusServerAccPort INTEGER
  sleRadiusServerMode BITS

SleTacacsServerEntry  
SEQUENCE    
  sleTacacsServerAddress IpAddress
  sleTacacsServerClientKey OCTET STRING

SleAclEntry  
SEQUENCE    
  sleAclName OCTET STRING
  sleAclSrcIpAddr IpAddress
  sleAclSrcPrefixLength Integer32
  sleAclDstIpAddr IpAddress
  sleAclDstPrefixLength Integer32
  sleAclDscp Integer32
  sleAclProtocolType Integer32
  sleAclTcpFlag BITS
  sleAclSrcL4Port Integer32
  sleAclDstL4Port Integer32
  sleAclPktLen Integer32
  sleAclValidFlags BITS
  sleAclMatchFlags BITS
  sleAclMatchAction INTEGER
  sleAclNomatchAction INTEGER
  sleAclPriority INTEGER

SleDot1xPortEntry  
SEQUENCE    
  sleDot1xPortIndex InterfaceIndex
  sleDot1xPortEnable INTEGER
  sleDot1xPortMode INTEGER
  sleDot1xPortReauthEnable INTEGER
  sleDot1xPortQuietPeriod Integer32
  sleDot1xPortReauthPeriod Integer32
  sleDot1xPortAuthSuccess INTEGER

SleDot1xStatisticsEntry  
SEQUENCE    
  sleDot1xStatsPortIndex INTEGER
  sleDot1xStatsEapolFramesRx Counter32
  sleDot1xStatsEapolFramesTx Counter32
  sleDot1xStatsEapolStartFramesRx Counter32
  sleDot1xStatsEapolLogoffFramesRx Counter32
  sleDot1xStatsEapolRespIdFramesRx Counter32
  sleDot1xStatsEapolRespFramesRx Counter32
  sleDot1xStatsEapolReqIdFramesTx Counter32
  sleDot1xStatsEapolReqFramesTx Integer32
  sleDot1xStatsInvalidEapolFramesRx Counter32
  sleDot1xStatsEapLengthErrorFramesRx Counter32
  sleDot1xStatsLastEapolFrameVersion Counter32
  sleDot1xStatsLastEapolFrameSource MacAddress

SleArpAclEntry  
SEQUENCE    
  sleArpAclIndex INTEGER
  sleArpAclName OCTET STRING
  sleArpAclNumEntries INTEGER

SleArpAclRuleEntry  
SEQUENCE    
  sleArpAclRuleAclIndex Integer32
  sleArpAclRuleIndex Integer32
  sleArpAclRuleAction INTEGER
  sleArpAclRuleType INTEGER
  sleArpAclRuleRangeStartIP IpAddress
  sleArpAclRuleRangeEndIP IpAddress
  sleArpAclRuleIPAddress IpAddress
  sleArpAclRuleIPMask Integer32
  sleArpAclRuleMacAddr MacAddress
  sleArpAclRuleMacType INTEGER

SleArpInspectVlanEntry  
SEQUENCE    
  sleArpInspectVlanIndex Integer32
  sleArpInspectVlanEnable INTEGER
  sleArpInspectVlanFilterAcl Integer32
  sleArpInspectVlanFwdPktCnt Integer32
  sleArpInspectVlanDropPktCnt Integer32
  sleArpInspectVlanAclPermits Integer32
  sleArpInspectVlanAclDrops Integer32
  sleArpInspectVlanSrcMacFailurs Integer32
  sleArpInspectVlanDstMacFailurs Integer32
  sleArpInspectVlanIpAddrFailurs Integer32
  sleArpInspectVlanFilterAclName OCTET STRING

SleArpInspectPortEntry  
SEQUENCE    
  sleArpInspectPortIndex Integer32
  sleArpInspectPortTrust INTEGER

SleArpInspectInvalidLogEntry  
SEQUENCE    
  sleArpInspectInvalidLogId INTEGER
  sleArpInspectInvalidLogReason INTEGER
  sleArpInspectInvalidLogSamePktCnt Counter32
  sleArpInspectInvalidLogOpcode INTEGER
  sleArpInspectInvalidLogPortNumber INTEGER
  sleArpInspectInvalidLogVlanId INTEGER
  sleArpInspectInvalidLogSrcMacAddr OCTET STRING
  sleArpInspectInvalidLogSrcIpAddr IpAddress
  sleArpInspectInvalidLogDstMacAddr OCTET STRING
  sleArpInspectInvalidLogDstIpAddr IpAddress
  sleArpInspectInvalidLogLastRecvTime OCTET STRING

SleSecurityAttackBasicExceptListEntry  
SEQUENCE    
  sleSecurityAttackBasicExceptListIndex Integer32
  sleSecurityAttackBasicExceptListProtocolType INTEGER
  sleSecurityAttackBasicExceptListSourceIpAddress IpAddress
  sleSecurityAttackBasicExceptListDestinationIpAddress IpAddress
  sleSecurityAttackBasicExceptListIngressPort Integer32

SleSecurityAttackBasicBlackListEntry  
SEQUENCE    
  sleSecurityAttackBasicBlackListIndex Integer32
  sleSecurityAttackBasicBlackListProtocolType INTEGER
  sleSecurityAttackBasicBlackListSourceIpAddress IpAddress
  sleSecurityAttackBasicBlackListDestinationIpAddress IpAddress
  sleSecurityAttackBasicBlackListBlockingStatus INTEGER
  sleSecurityAttackBasicBlackListIgressPort Integer32

SleSecurityAttackBasicBlockedListEntry  
SEQUENCE    
  sleSecurityAttackBasicBlockedListIndex Integer32
  sleSecurityAttackBasicBlockedListAttackType INTEGER
  sleSecurityAttackBasicBlockedListStartTime OCTET STRING
  sleSecurityAttackBasicBlockedListEndTime OCTET STRING
  sleSecurityAttackBasicBlockedListAttackSourceIp IpAddress
  sleSecurityAttackBasicBlockedListAttackDestinationIp IpAddress
  sleSecurityAttackBasicBlockedListProtocol INTEGER
  sleSecurityAttackBasicBlockedListAttackPktCount Counter32
  sleSecurityAttackBasicBlockedListAttackBlockTime Integer32
  sleSecurityAttackBasicBlockedListBlackListIndex Integer32
  sleSecurityAttackBasicBlockedListIgressPort Integer32

SleSecurityAttackExpansionPolicyEntry  
SEQUENCE    
  sleSecurityAttackExpansionPolicyPortIndex Integer32
  sleSecurityAttackExpansionPolicyStatus INTEGER
  sleSecurityAttackExpansionPolicyAttackType BITS
  sleSecurityAttackExpansionPolicyBlockTime OCTET STRING

SleSecurityAttackExpansionExceptListEntry  
SEQUENCE    
  sleSecurityAttackExpansionExceptListPortIndex Integer32
  sleSecurityAttackExpansionExceptListIndex Integer32
  sleSecurityAttackExpansionExceptListRuleIndex Integer32
  sleSecurityAttackExpansionExceptListProtocolType INTEGER
  sleSecurityAttackExpansionExceptListSourceType INTEGER
  sleSecurityAttackExpansionExceptListSourceIpAddress IpAddress
  sleSecurityAttackExpansionExceptListSourceIpMask Integer32
  sleSecurityAttackExpansionExceptListSourceMac OCTET STRING
  sleSecurityAttackExpansionExceptListSourcePortType INTEGER
  sleSecurityAttackExpansionExceptListSourcePortFrom Integer32
  sleSecurityAttackExpansionExceptListSourcePortTo Integer32
  sleSecurityAttackExpansionExceptListDestinationType INTEGER
  sleSecurityAttackExpansionExceptListDestinationIpAddress IpAddress
  sleSecurityAttackExpansionExceptListDestinationIpMask Integer32
  sleSecurityAttackExpansionExceptListDestinationMac OCTET STRING
  sleSecurityAttackExpansionExceptListDestinationPortType INTEGER
  sleSecurityAttackExpansionExceptListDestinationPortFrom Integer32
  sleSecurityAttackExpansionExceptListDestinationPortTo Integer32

SleSecurityAttackExpansionBlockedListEntry  
SEQUENCE    
  sleSecurityAttackExpansionBlockedListPortIndex Integer32
  sleSecurityAttackExpansionBlockedListIndex Integer32
  sleSecurityAttackExpansionBlockedListRuleIndex Integer32
  sleSecurityAttackExpansionBlockedListAttackType INTEGER
  sleSecurityAttackExpansionBlockedListAttackBlockType BITS
  sleSecurityAttackExpansionBlockedListStartTime OCTET STRING
  sleSecurityAttackExpansionBlockedListEndTime OCTET STRING
  sleSecurityAttackExpansionBlockedListAttackSourceIp IpAddress
  sleSecurityAttackExpansionBlockedListSourceMac OCTET STRING
  sleSecurityAttackExpansionBlockedListAttackDestinationIp IpAddress
  sleSecurityAttackExpansionBlockedListProtocol INTEGER
  sleSecurityAttackExpansionBlockedListSourcePort Integer32
  sleSecurityAttackExpansionBlockedListDestinationPort Integer32
  sleSecurityAttackExpansionBlockedListAttackPktCount Counter32
  sleSecurityAttackExpansionBlockedListAttackBlockTime Integer32

SleNDAclEntry  
SEQUENCE    
  sleNDAclIndex INTEGER
  sleNDAclName OCTET STRING
  sleNDAclNumEntries INTEGER

SleNDAclRuleEntry  
SEQUENCE    
  sleNDAclRuleAclIndex INTEGER
  sleNDAclRuleIndex INTEGER
  sleNDAclRuleAction INTEGER
  sleNDAclRuleType INTEGER
  sleNDAclRuleRangeStartIPv6 InetAddressIPv6
  sleNDAclRuleRangeEndIPv6 InetAddressIPv6
  sleNDAclRuleIPv6Address InetAddressIPv6
  sleNDAclRuleIPv6Mask Integer32
  sleNDAclRuleMacAddr MacAddress
  sleNDAclRuleMacType INTEGER

SleNDInspectVlanEntry  
SEQUENCE    
  sleNDInspectVlanIndex Integer32
  sleNDInspectVlanEnable INTEGER
  sleNDInspectVlanFilterAclIndex Integer32
  sleNDInspectVlanFwdPktCnt Integer32
  sleNDInspectVlanDropPktCnt Integer32
  sleNDInspectVlanAclPermits Integer32
  sleNDInspectVlanAclDrops Integer32
  sleNDInspectVlanDhcpv6Permits INTEGER
  sleNDInspectVlanDhcpv6Denys INTEGER
  sleNDInspectVlanLocalIpv6Denys INTEGER
  sleNDInspectVlanFilterAclName OCTET STRING

SleNDInspectPortEntry  
SEQUENCE    
  sleNDInspectPortIndex Integer32
  sleNDInspectPortTrust INTEGER

SleNDInspectInvalidLogEntry  
SEQUENCE    
  sleNDInspectInvalidLogId INTEGER
  sleNDInspectInvalidLogReason INTEGER
  sleNDInspectInvalidLogSamePktCnt Counter32
  sleNDInspectInvalidLogPortNumber INTEGER
  sleNDInspectInvalidLogVlanId INTEGER
  sleNDInspectInvalidLogSenderMacAddr OCTET STRING
  sleNDInspectInvalidLogSrcMacAddr OCTET STRING
  sleNDInspectInvalidLogSenderIpv6Addr InetAddressIPv6
  sleNDInspectInvalidLogDstIpv6Addr InetAddressIPv6
  sleNDInspectInvalidLogLastRecvTime OCTET STRING
  sleNDInspectInvalidLogNDType INTEGER

SleRAGuardPolicyEntry  
SEQUENCE    
  sleRAGuardPolicyIndex INTEGER
  sleRAGuardPolicyName OCTET STRING
  sleRAGuardPolicyHoplimitMin INTEGER
  sleRAGuardPolicyHoplimitMax INTEGER
  sleRAGuardPolicyManagedFlag INTEGER
  sleRAGuardPolicyOtherFlag INTEGER
  sleRAGuardPolicyRouterPreference INTEGER
  sleRAGuardPolicyMatchACLName OCTET STRING
  sleRAGuardPolicyMatchPrefixName OCTET STRING

SleRAGuardVlanEntry  
SEQUENCE    
  sleRAGuardVlanIndex Integer32
  sleRAGuardVlanEnable INTEGER
  sleRAGuardVlanFilterPolicy Integer32
  sleRAGuardVlanFilterAclName OCTET STRING

SleRAGuardPortEntry  
SEQUENCE    
  sleRAGuardPortIndex Integer32
  sleRAGuardPortTrust INTEGER

SleRadiusServerDot1xEntry  
SEQUENCE    
  sleRadiusServerDot1xAddress IpAddress
  sleRadiusServerDot1xAuthPort INTEGER
  sleRadiusServerDot1xTimeout INTEGER
  sleRadiusServerDot1xRetransmit INTEGER
  sleRadiusServerDot1xClientKey OCTET STRING

SleKeyChainEntry  
SEQUENCE    
  sleKeyChainName OCTET STRING
  sleKeyChainKeyId Integer32
  sleKeyChainKeyString OCTET STRING
  sleKeyChainKeyAccepLifeTimeStartTime OCTET STRING
  sleKeyChainKeyAcceptLifeTimeStartDay Integer32
  sleKeyChainKeyAcceptLifeTimeStartMonth INTEGER
  sleKeyChainKeyAcceptLifeTimeStartYear INTEGER
  sleKeyChainKeyAcceptLifeTimeExpireType INTEGER
  sleKeyChainKeyAcceptLifeTimeExpireTime OCTET STRING
  sleKeyChainKeyAcceptLifeTimeExpireDay INTEGER
  sleKeyChainKeyAcceptLifeTimeExpireMonth INTEGER
  sleKeyChainKeyAcceptLifeTimeExpireYear INTEGER
  sleKeyChainKeySendLifeTimeStartTime OCTET STRING
  sleKeyChainKeySendLifeTimeStartDay Integer32
  sleKeyChainKeySendLifeTimeStartMonth INTEGER
  sleKeyChainKeySendLifeTimeStartYear INTEGER
  sleKeyChainKeySendLifeTimeExpireType INTEGER
  sleKeyChainKeySendLifeTimeExpireTime OCTET STRING
  sleKeyChainKeySendLifeTimeExpireDay INTEGER
  sleKeyChainKeySendLifeTimeExpireMonth INTEGER
  sleKeyChainKeySendLifeTimeExpireYear INTEGER

Defined Values

sleSecurity 1.3.6.1.4.1.6296.101.7
Description.
MODULE-IDENTITY    

sleSecurityBase 1.3.6.1.4.1.6296.101.7.1
OBJECT IDENTIFIER    

sleSecurityBaseInfo 1.3.6.1.4.1.6296.101.7.1.1
OBJECT IDENTIFIER    

sleSecurityRadiusRetransmissions 1.3.6.1.4.1.6296.101.7.1.1.1
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityRadiusTimeouts 1.3.6.1.4.1.6296.101.7.1.1.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityRadiusInterfaceName 1.3.6.1.4.1.6296.101.7.1.1.3
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleSecurityRadiusInterfaceAddress 1.3.6.1.4.1.6296.101.7.1.1.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityTacacsInterfaceName 1.3.6.1.4.1.6296.101.7.1.1.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleSecurityTacacsInterfaceAddress 1.3.6.1.4.1.6296.101.7.1.1.6
Description
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityTacacsPort 1.3.6.1.4.1.6296.101.7.1.1.7
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleSecurityTacacsAuthType 1.3.6.1.4.1.6296.101.7.1.1.8
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ascii(0), pap(1), chap(2)  

sleSecurityTacacsTimeouts 1.3.6.1.4.1.6296.101.7.1.1.9
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityTacacsPriorityLevel 1.3.6.1.4.1.6296.101.7.1.1.10
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER max(0), min(1), root(2), user(3)  

sleSecurityDot1xActivity 1.3.6.1.4.1.6296.101.7.1.1.11
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityLoginLimits 1.3.6.1.4.1.6296.101.7.1.1.12
The limit number of use login.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityLoginLockAttemptsCount 1.3.6.1.4.1.6296.101.7.1.1.13
This feature limits login when login failed for invalid password admin. (default attempts: 5, default delay: 5 minutes)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 3..10  

sleSecurityLoginLockDelayTime 1.3.6.1.4.1.6296.101.7.1.1.14
This feature limits login when login failed for invalid password admin. (default attempts: 5, default delay: 5 minutes)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..10  

sleSecurityLoginAccountingMode 1.3.6.1.4.1.6296.101.7.1.1.15
The login accounting mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), start(1), stop(2), both(3)  

sleSecurityBaseControl 1.3.6.1.4.1.6296.101.7.1.2
OBJECT IDENTIFIER    

sleSecurityControlRequest 1.3.6.1.4.1.6296.101.7.1.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setSecurityBaseRadiusProfile(1), setSecurityBaseTacacsProfile(2), setSecurityBaseDot1xActivity(3), setSecurityBaseLoginLimits(4), setSecurityBaseLoginLockConf(5), destroySecurityBaseLoginLockConf(6), setLoginAccountingMode(7)  

sleSecurityControlStatus 1.3.6.1.4.1.6296.101.7.1.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityControlTimer 1.3.6.1.4.1.6296.101.7.1.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityControlTimeStamp 1.3.6.1.4.1.6296.101.7.1.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleSecurityControlReqResult 1.3.6.1.4.1.6296.101.7.1.2.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityControlRadiusRetransmissions 1.3.6.1.4.1.6296.101.7.1.2.6
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityControlRadiusTimeouts 1.3.6.1.4.1.6296.101.7.1.2.7
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityControlRadiusInterfaceName 1.3.6.1.4.1.6296.101.7.1.2.8
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleSecurityControlRadiusInterfaceAddress 1.3.6.1.4.1.6296.101.7.1.2.9
Description
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSecurityControlTacacsInterfaceName 1.3.6.1.4.1.6296.101.7.1.2.10
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleSecurityControlTacacsInterfaceAddress 1.3.6.1.4.1.6296.101.7.1.2.11
Description
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSecurityControlTacacsPort 1.3.6.1.4.1.6296.101.7.1.2.12
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleSecurityControlTacacsAuthType 1.3.6.1.4.1.6296.101.7.1.2.13
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ascii(0), pap(1), chap(2)  

sleSecurityControlTacacsTimeouts 1.3.6.1.4.1.6296.101.7.1.2.14
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityControlTacacsPriorityLevel 1.3.6.1.4.1.6296.101.7.1.2.15
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER max(0), min(1), root(2), user(3)  

sleSecurityControlDot1xActivity 1.3.6.1.4.1.6296.101.7.1.2.16
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityControlLoginLimits 1.3.6.1.4.1.6296.101.7.1.2.17
The limit number of use login.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityControlLoginLockAttemptsCount 1.3.6.1.4.1.6296.101.7.1.2.18
This feature limits login when login failed for invalid password admin. (default attempts: 5, default delay: 5 minutes)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..10  

sleSecurityControlLoginLockDelayTime 1.3.6.1.4.1.6296.101.7.1.2.19
This feature limits login when login failed for invalid password admin. (default attempts: 5, default delay: 5 minutes)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

sleSecurityControlLoginAccountingMode 1.3.6.1.4.1.6296.101.7.1.2.20
The login accounting mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), start(1), stop(2), both(3)  

sleSecurityBaseNotification 1.3.6.1.4.1.6296.101.7.1.3
OBJECT IDENTIFIER    

sleSecurityRadiusProfileChanged 1.3.6.1.4.1.6296.101.7.1.3.1
Description
Status: current Access: read-only
NOTIFICATION-TYPE    

sleSecurityTacacsProfileChanged 1.3.6.1.4.1.6296.101.7.1.3.2
Description
Status: current Access: read-only
NOTIFICATION-TYPE    

sleSecurityDot1xActivityChanged 1.3.6.1.4.1.6296.101.7.1.3.3
Description
Status: current Access: read-only
NOTIFICATION-TYPE    

sleSecurityBaseLoginLimitsChanged 1.3.6.1.4.1.6296.101.7.1.3.4
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

sleSecurityBaseLoginLockConfChanged 1.3.6.1.4.1.6296.101.7.1.3.5
setSecurityBaseLoginLockConf
Status: current Access: read-only
NOTIFICATION-TYPE    

sleSecurityBaseLoginLockConfDestroyed 1.3.6.1.4.1.6296.101.7.1.3.6
destroySecurityBaseLoginLockConf
Status: current Access: read-only
NOTIFICATION-TYPE    

sleSecurityLoginAccountingModeChanged 1.3.6.1.4.1.6296.101.7.1.3.7
setLoginAccountingMode
Status: current Access: read-only
NOTIFICATION-TYPE    

sleAAA 1.3.6.1.4.1.6296.101.7.2
OBJECT IDENTIFIER    

sleAaaTable 1.3.6.1.4.1.6296.101.7.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAaaEntry

sleAaaEntry 1.3.6.1.4.1.6296.101.7.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAaaEntry  

sleAaaSession 1.3.6.1.4.1.6296.101.7.2.1.1.1
Location of authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER console(1), remote(2)  

sleAaaAuthen 1.3.6.1.4.1.6296.101.7.2.1.1.2
The kind of authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER host(1), radius(2), tacacs(3)  

sleAaaEnable 1.3.6.1.4.1.6296.101.7.2.1.1.3
Enable or disable the corresponding authen method.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleAaaPrimarySequence 1.3.6.1.4.1.6296.101.7.2.1.1.4
The primary priority of the corresponding authen method
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

sleAaaControl 1.3.6.1.4.1.6296.101.7.2.2
OBJECT IDENTIFIER    

sleAaaControlRequest 1.3.6.1.4.1.6296.101.7.2.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setAaaProfile(1)  

sleAaaControlStatus 1.3.6.1.4.1.6296.101.7.2.2.2
Describes the status of a user command group, used for block commands while a command execution in process.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAaaControlTimer 1.3.6.1.4.1.6296.101.7.2.2.3
Maximum command duration time in case of long running.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAaaControlTimeStamp 1.3.6.1.4.1.6296.101.7.2.2.4
Time stamp attribute set at end of command.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleAaaControlReqResult 1.3.6.1.4.1.6296.101.7.2.2.5
Command result attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAaaControlSession 1.3.6.1.4.1.6296.101.7.2.2.6
Location of authentication.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER console(1), remote(2)  

sleAaaControlAuthen 1.3.6.1.4.1.6296.101.7.2.2.7
The kind of authentication.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER host(1), radius(2), tacacs(3)  

sleAaaControlEnable 1.3.6.1.4.1.6296.101.7.2.2.8
Enable or disable the corresponding authen method.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleAaaControlPrimaryFlag 1.3.6.1.4.1.6296.101.7.2.2.9
The primary validation flag of the corresponding authen method
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleAaaNotification 1.3.6.1.4.1.6296.101.7.2.3
OBJECT IDENTIFIER    

sleAaaProfileChanged 1.3.6.1.4.1.6296.101.7.2.3.1
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleRadiusServer 1.3.6.1.4.1.6296.101.7.3
OBJECT IDENTIFIER    

sleRadiusServerTable 1.3.6.1.4.1.6296.101.7.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleRadiusServerEntry

sleRadiusServerEntry 1.3.6.1.4.1.6296.101.7.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleRadiusServerEntry  

sleRadiusServerAddress 1.3.6.1.4.1.6296.101.7.3.1.1.1
The IP address of the RADIUS server referred to in this table entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleRadiusServerClientKey 1.3.6.1.4.1.6296.101.7.3.1.1.2
The key to be used in communication between the device and the Radius server.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleRadiusServerAuthPort 1.3.6.1.4.1.6296.101.7.3.1.1.3
The UDP port the client is using to send requests to this server for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleRadiusServerAccPort 1.3.6.1.4.1.6296.101.7.3.1.1.4
The UDP port the client is using to send requests to this server for accounting.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleRadiusServerMode 1.3.6.1.4.1.6296.101.7.3.1.1.5
Radius Server operation mode: if set bit 0, is used in login, and if set bit 1, is used in 802.1X (dot1x).
Status: current Access: read-only
OBJECT-TYPE    
  BITS aaa(0), dot1x(1)  

sleRadiusServerControl 1.3.6.1.4.1.6296.101.7.3.2
OBJECT IDENTIFIER    

sleRadiusServerControlRequest 1.3.6.1.4.1.6296.101.7.3.2.1
The MIB object for the user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createRadiusServer(1), destroyRadiusServer(2), setRadiusServerProfile(3)  

sleRadiusServerControlStatus 1.3.6.1.4.1.6296.101.7.3.2.2
Describes the status of a user command group, used for block commands while a command execution in process.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleRadiusServerControlTimer 1.3.6.1.4.1.6296.101.7.3.2.3
Maximum command duration time in case of long running
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleRadiusServerControlTimeStamp 1.3.6.1.4.1.6296.101.7.3.2.4
Time stamp attribute set at end of command.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleRadiusServerControlReqResult 1.3.6.1.4.1.6296.101.7.3.2.5
Command result attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleRadiusServerControlAddress 1.3.6.1.4.1.6296.101.7.3.2.6
The IP address of the RADIUS server referred to in this table entry.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleRadiusServerControlClientKey 1.3.6.1.4.1.6296.101.7.3.2.7
The key to be used in communication between the device and the Radius server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleRadiusServerControlAuthPort 1.3.6.1.4.1.6296.101.7.3.2.8
The service port number for communication with server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleRadiusServerControlAccPort 1.3.6.1.4.1.6296.101.7.3.2.9
The service port number for communication with server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleRadiusServerControlMode 1.3.6.1.4.1.6296.101.7.3.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  BITS aaa(0), dot1x(1)  

sleRadiusServerNotification 1.3.6.1.4.1.6296.101.7.3.3
OBJECT IDENTIFIER    

sleRadiusServerCreated 1.3.6.1.4.1.6296.101.7.3.3.1
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleRadiusServerDestroyed 1.3.6.1.4.1.6296.101.7.3.3.2
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleRadiusServerProfileChanged 1.3.6.1.4.1.6296.101.7.3.3.3
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTacacsServer 1.3.6.1.4.1.6296.101.7.4
OBJECT IDENTIFIER    

sleTacacsServerTable 1.3.6.1.4.1.6296.101.7.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleTacacsServerEntry

sleTacacsServerEntry 1.3.6.1.4.1.6296.101.7.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleTacacsServerEntry  

sleTacacsServerAddress 1.3.6.1.4.1.6296.101.7.4.1.1.1
The IP address of the TACACS accounting server referred to in this table entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleTacacsServerClientKey 1.3.6.1.4.1.6296.101.7.4.1.1.2
The key to be used in communication between the device and the Tacacs server.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleTacacsServerControl 1.3.6.1.4.1.6296.101.7.4.2
OBJECT IDENTIFIER    

sleTacacsServerControlRequest 1.3.6.1.4.1.6296.101.7.4.2.1
The MIB object for the user command.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createTacacsServer(1), destroyTacacsServer(2), setTacacsServerClientKey(3)  

sleTacacsServerControlStatus 1.3.6.1.4.1.6296.101.7.4.2.2
Describes the status of a user command group, used for block commands while a command execution in process.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleTacacsServerControlTimer 1.3.6.1.4.1.6296.101.7.4.2.3
Maximum command duration time in case of long running.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleTacacsServerControlTimeStamp 1.3.6.1.4.1.6296.101.7.4.2.4
Time stamp attribute set at end of command.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleTacacsServerControlReqResult 1.3.6.1.4.1.6296.101.7.4.2.5
Command result attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleTacacsServerControlAddress 1.3.6.1.4.1.6296.101.7.4.2.6
The IP address of the TACACS accounting server referred to in this table entry.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleTacacsServerControlClientKey 1.3.6.1.4.1.6296.101.7.4.2.7
The key to be used in communication between the device and the Tacacs server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleTacacsServerNotification 1.3.6.1.4.1.6296.101.7.4.3
OBJECT IDENTIFIER    

sleTacacsServerCreated 1.3.6.1.4.1.6296.101.7.4.3.1
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTacacsServerDestroyed 1.3.6.1.4.1.6296.101.7.4.3.2
DescriptionDescription
Status: current Access: read-write
NOTIFICATION-TYPE    

sleTacacsServerClientKeyChanged 1.3.6.1.4.1.6296.101.7.4.3.3
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAcl 1.3.6.1.4.1.6296.101.7.5
OBJECT IDENTIFIER    

sleAclTable 1.3.6.1.4.1.6296.101.7.5.1
Description
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAclEntry

sleAclEntry 1.3.6.1.4.1.6296.101.7.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAclEntry  

sleAclName 1.3.6.1.4.1.6296.101.7.5.1.1.1
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleAclSrcIpAddr 1.3.6.1.4.1.6296.101.7.5.1.1.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleAclSrcPrefixLength 1.3.6.1.4.1.6296.101.7.5.1.1.3
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..31  

sleAclDstIpAddr 1.3.6.1.4.1.6296.101.7.5.1.1.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleAclDstPrefixLength 1.3.6.1.4.1.6296.101.7.5.1.1.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..31  

sleAclDscp 1.3.6.1.4.1.6296.101.7.5.1.1.6
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAclProtocolType 1.3.6.1.4.1.6296.101.7.5.1.1.7
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

sleAclTcpFlag 1.3.6.1.4.1.6296.101.7.5.1.1.8
Description
Status: current Access: read-only
OBJECT-TYPE    
  BITS reserv(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)  

sleAclSrcL4Port 1.3.6.1.4.1.6296.101.7.5.1.1.9
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleAclDstL4Port 1.3.6.1.4.1.6296.101.7.5.1.1.10
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleAclPktLen 1.3.6.1.4.1.6296.101.7.5.1.1.11
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 21..65535  

sleAclValidFlags 1.3.6.1.4.1.6296.101.7.5.1.1.12
Description
Status: current Access: read-only
OBJECT-TYPE    
  BITS aclSrcIpAddress(0), aclSrcPrefixLegth(1), aclDstIpAddress(2), aclDstPrefixLegth(3), aclDscp(4), aclProtocolType(5), aclTcpFlags(6), aclSrcL4Port(7), aclDstL4Port(8), aclPacketLength(9)  

sleAclMatchFlags 1.3.6.1.4.1.6296.101.7.5.1.1.13
Description
Status: current Access: read-only
OBJECT-TYPE    
  BITS aclSrcIpAddress(0), aclSrcPrefixLegth(1), aclDstIpAddress(2), aclDstPrefixLength(3), aclDscp(4), aclProtocolType(5), aclTcpFlag(6), aclSrcL4Port(7), aclDstL4Port(8), aclPacketLength(9)  

sleAclMatchAction 1.3.6.1.4.1.6296.101.7.5.1.1.14
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

sleAclNomatchAction 1.3.6.1.4.1.6296.101.7.5.1.1.15
DescriptionDescription
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

sleAclPriority 1.3.6.1.4.1.6296.101.7.5.1.1.16
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), highest(4)  

sleAclControl 1.3.6.1.4.1.6296.101.7.5.2
OBJECT IDENTIFIER    

sleAclControlReqest 1.3.6.1.4.1.6296.101.7.5.2.1
DescriptionDescription
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createAclRule(1), destroyAclRule(2), setAclClassifierProfile(3), setAclMatchAction(10), setAclNomatchAction(11)  

sleAclControlStatus 1.3.6.1.4.1.6296.101.7.5.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAclControlTimer 1.3.6.1.4.1.6296.101.7.5.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAclControlTimeStamp 1.3.6.1.4.1.6296.101.7.5.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleAclControlReqResult 1.3.6.1.4.1.6296.101.7.5.2.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAclControlName 1.3.6.1.4.1.6296.101.7.5.2.6
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

sleAclControlSrcIpAddr 1.3.6.1.4.1.6296.101.7.5.2.7
Description
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleAclControlSrcPrefixLength 1.3.6.1.4.1.6296.101.7.5.2.8
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..31  

sleAclControlDstIpAddr 1.3.6.1.4.1.6296.101.7.5.2.9
DescriptionDescription
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleAclControlDstPrefixLength 1.3.6.1.4.1.6296.101.7.5.2.10
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..31  

sleAclControlDscp 1.3.6.1.4.1.6296.101.7.5.2.11
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAclControlProtocolType 1.3.6.1.4.1.6296.101.7.5.2.12
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

sleAclControlTcpFlag 1.3.6.1.4.1.6296.101.7.5.2.13
Description
Status: current Access: read-write
OBJECT-TYPE    
  BITS reserv(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)  

sleAclControlSrcL4Port 1.3.6.1.4.1.6296.101.7.5.2.14
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleAclControlDstL4Port 1.3.6.1.4.1.6296.101.7.5.2.15
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleAclControlPktLen 1.3.6.1.4.1.6296.101.7.5.2.16
Description
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 21..65535  

sleAclControlValidFlags 1.3.6.1.4.1.6296.101.7.5.2.17
Description
Status: current Access: read-write
OBJECT-TYPE    
  BITS aclSrcIpAddress(0), aclSrcPrefixLength(1), aclDstIpAddress(2), aclDstPrefixLength(3), aclDscp(4), aclProtocolType(5), aclTcpFlag(6), aclSrcL4Port(7), aclDstL4Port(8), aclPacketLength(9)  

sleAclControlMatchFlags 1.3.6.1.4.1.6296.101.7.5.2.18
Description
Status: current Access: read-write
OBJECT-TYPE    
  BITS aclSrcIpAddress(0), aclSrcPrefixLength(1), aclDstIpAddress(2), aclDstPrefixLength(3), aclDscp(4), aclProtocolType(5), aclTcpFlag(6), aclSrcL4Port(7), aclDstL4Port(8), aclPacketLength(9)  

sleAclControlMatchAction 1.3.6.1.4.1.6296.101.7.5.2.19
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2)  

sleAclControlNomatchAction 1.3.6.1.4.1.6296.101.7.5.2.20
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2)  

sleAclControlPriority 1.3.6.1.4.1.6296.101.7.5.2.21
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), highest(4)  

sleAclNotification 1.3.6.1.4.1.6296.101.7.5.3
OBJECT IDENTIFIER    

sleAclCreated 1.3.6.1.4.1.6296.101.7.5.3.1
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAclDestroyed 1.3.6.1.4.1.6296.101.7.5.3.2
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAclClassifierProfileChanged 1.3.6.1.4.1.6296.101.7.5.3.3
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAclMatchActionChanged 1.3.6.1.4.1.6296.101.7.5.3.4
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAclNomatchActionChanged 1.3.6.1.4.1.6296.101.7.5.3.5
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleDot1xPort 1.3.6.1.4.1.6296.101.7.6
OBJECT IDENTIFIER    

sleDot1xPortTable 1.3.6.1.4.1.6296.101.7.6.1
The table that contains the configuration objects for the Authenticator PAE associated with each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleDot1xPortEntry

sleDot1xPortEntry 1.3.6.1.4.1.6296.101.7.6.1.1
The configuration information for an Authenticator PAE.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleDot1xPortEntry  

sleDot1xPortIndex 1.3.6.1.4.1.6296.101.7.6.1.1.1
The port number associated with this port.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

sleDot1xPortEnable 1.3.6.1.4.1.6296.101.7.6.1.1.2
The administrativ state for each port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), portEnable(2), macEnable(3)  

sleDot1xPortMode 1.3.6.1.4.1.6296.101.7.6.1.1.3
The control values of the Authenticator PAE controlled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(-1), none(0), auto(1), forceAuthorized(2), forceUnauthorized(3)  

sleDot1xPortReauthEnable 1.3.6.1.4.1.6296.101.7.6.1.1.4
The reauthentication control for this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleDot1xPortQuietPeriod 1.3.6.1.4.1.6296.101.7.6.1.1.5
The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleDot1xPortReauthPeriod 1.3.6.1.4.1.6296.101.7.6.1.1.6
The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleDot1xPortAuthSuccess 1.3.6.1.4.1.6296.101.7.6.1.1.7
The value result to authentication of the supplicator.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fail(1), success(2)  

sleDot1xPortControl 1.3.6.1.4.1.6296.101.7.6.2
OBJECT IDENTIFIER    

sleDot1xPortControlRequest 1.3.6.1.4.1.6296.101.7.6.2.1
The MIB object for the dot1x command.A SetRequest on this attribute starts a command execution process in the netElement.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setDot1xPortProfile(1), setDot1xPortReauthenticate(2), setDot1xPortInittialize(3)  

sleDot1xPortControlStatus 1.3.6.1.4.1.6296.101.7.6.2.2
Describes the status of a user command group, used for block commands while a command execution in process
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleDot1xPortControlTimer 1.3.6.1.4.1.6296.101.7.6.2.3
Maximum command duration time in case of long running.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleDot1xPortControlTimeStamp 1.3.6.1.4.1.6296.101.7.6.2.4
Time stamp attribute set at end of command.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleDot1xPortControlReqResult 1.3.6.1.4.1.6296.101.7.6.2.5
Command result attribute.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleDot1xPortControlIndex 1.3.6.1.4.1.6296.101.7.6.2.6
The port number associated with this port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleDot1xPortControlEnable 1.3.6.1.4.1.6296.101.7.6.2.7
The administrativ state for each port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(-1), disable(1), portEnable(2), macEnable(3)  

sleDot1xPortControlMode 1.3.6.1.4.1.6296.101.7.6.2.8
The control values of the Authenticator PAE controlled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(-1), none(0), auto(1), forceAuthorized(2), forceUnauthorized(3)  

sleDot1xPortControlReauthEnable 1.3.6.1.4.1.6296.101.7.6.2.9
The reauthentication control for this port. Setting this attribute TRUE causes the Authenticator PAE state machine for the Port to reauthenticate the Supplicant. Setting this attribute FALSE has no effect.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(-1), disable(0), enable(1)  

sleDot1xPortControlQuietPeriod 1.3.6.1.4.1.6296.101.7.6.2.10
The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..65535  

sleDot1xPortControlReauthPeriod 1.3.6.1.4.1.6296.101.7.6.2.11
The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine. (0~4294967295 for V5812G. 0 is initialization at 3600.)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..65535  

sleDot1xPortNotification 1.3.6.1.4.1.6296.101.7.6.3
OBJECT IDENTIFIER    

sleDot1xPortProfileChanged 1.3.6.1.4.1.6296.101.7.6.3.1
The trap for CLI command.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleDot1xPortAuthSuccessChanged 1.3.6.1.4.1.6296.101.7.6.3.2
The trap for authentication result.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleDot1xStatistics 1.3.6.1.4.1.6296.101.7.7
OBJECT IDENTIFIER    

sleDot1xStatisticsTable 1.3.6.1.4.1.6296.101.7.7.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleDot1xStatisticsEntry

sleDot1xStatisticsEntry 1.3.6.1.4.1.6296.101.7.7.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleDot1xStatisticsEntry  

sleDot1xStatsPortIndex 1.3.6.1.4.1.6296.101.7.7.1.1.1
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

sleDot1xStatsEapolFramesRx 1.3.6.1.4.1.6296.101.7.7.1.1.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsEapolFramesTx 1.3.6.1.4.1.6296.101.7.7.1.1.3
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsEapolStartFramesRx 1.3.6.1.4.1.6296.101.7.7.1.1.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsEapolLogoffFramesRx 1.3.6.1.4.1.6296.101.7.7.1.1.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsEapolRespIdFramesRx 1.3.6.1.4.1.6296.101.7.7.1.1.6
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsEapolRespFramesRx 1.3.6.1.4.1.6296.101.7.7.1.1.7
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsEapolReqIdFramesTx 1.3.6.1.4.1.6296.101.7.7.1.1.8
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsEapolReqFramesTx 1.3.6.1.4.1.6296.101.7.7.1.1.9
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleDot1xStatsInvalidEapolFramesRx 1.3.6.1.4.1.6296.101.7.7.1.1.10
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsEapLengthErrorFramesRx 1.3.6.1.4.1.6296.101.7.7.1.1.11
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsLastEapolFrameVersion 1.3.6.1.4.1.6296.101.7.7.1.1.12
Description
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleDot1xStatsLastEapolFrameSource 1.3.6.1.4.1.6296.101.7.7.1.1.13
Description
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sleDot1xStatisticsControl 1.3.6.1.4.1.6296.101.7.7.2
OBJECT IDENTIFIER    

sleDot1xStatsControlRequest 1.3.6.1.4.1.6296.101.7.7.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearDot1xStatistics(1)  

sleDot1xStatsControlStatus 1.3.6.1.4.1.6296.101.7.7.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleDot1xStatsControlTimer 1.3.6.1.4.1.6296.101.7.7.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleDot1xStatsControlTimeStamp 1.3.6.1.4.1.6296.101.7.7.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleDot1xStatsControlReqResult 1.3.6.1.4.1.6296.101.7.7.2.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleDot1xStatsControlPortIndex 1.3.6.1.4.1.6296.101.7.7.2.6
Description
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

sleDot1xStatisticsNotification 1.3.6.1.4.1.6296.101.7.7.3
OBJECT IDENTIFIER    

sleDot1xStatisticsCleared 1.3.6.1.4.1.6296.101.7.7.3.1
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpInspection 1.3.6.1.4.1.6296.101.7.8
OBJECT IDENTIFIER    

sleArpInspectBase 1.3.6.1.4.1.6296.101.7.8.1
OBJECT IDENTIFIER    

sleArpInspectBaseInfo 1.3.6.1.4.1.6296.101.7.8.1.1
OBJECT IDENTIFIER    

sleArpInspectValidateSrcMac 1.3.6.1.4.1.6296.101.7.8.1.1.1
Validate Source Mac
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleArpInspectValidateDstMac 1.3.6.1.4.1.6296.101.7.8.1.1.2
Validate Destination Mac
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleArpInspectValidateIpAddr 1.3.6.1.4.1.6296.101.7.8.1.1.3
Validate IP Address
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleArpInspectLogBufferSize 1.3.6.1.4.1.6296.101.7.8.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1024  

sleArpInspectLogEntry 1.3.6.1.4.1.6296.101.7.8.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1024  

sleArpInspectLogInterval 1.3.6.1.4.1.6296.101.7.8.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..86400  

sleArpInspectBaseControl 1.3.6.1.4.1.6296.101.7.8.1.2
OBJECT IDENTIFIER    

sleArpInspectControlRequest 1.3.6.1.4.1.6296.101.7.8.1.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setArpInspectValidateProfile(1), setArpInspectLogBufferSize(2), setArpInspectLogRate(3)  

sleArpInspectControlStatus 1.3.6.1.4.1.6296.101.7.8.1.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleArpInspectControlTimer 1.3.6.1.4.1.6296.101.7.8.1.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleArpInspectControlTimeStamp 1.3.6.1.4.1.6296.101.7.8.1.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleArpInspectControlReqResult 1.3.6.1.4.1.6296.101.7.8.1.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleArpInspectControlValidateSrcMac 1.3.6.1.4.1.6296.101.7.8.1.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleArpInspectControlValidateDstMac 1.3.6.1.4.1.6296.101.7.8.1.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleArpInspectControlValidateIpAddr 1.3.6.1.4.1.6296.101.7.8.1.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleArpInspectControlLogBufferSize 1.3.6.1.4.1.6296.101.7.8.1.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1024  

sleArpInspectControlLogEntry 1.3.6.1.4.1.6296.101.7.8.1.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1024  

sleArpInspectControlLogInterval 1.3.6.1.4.1.6296.101.7.8.1.2.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

sleArpInspectBaseNotifications 1.3.6.1.4.1.6296.101.7.8.1.3
OBJECT IDENTIFIER    

sleArpInspectValidateChanged 1.3.6.1.4.1.6296.101.7.8.1.3.1
sleArpInspectValidateControl
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpInspectLogBufferSizeChanged 1.3.6.1.4.1.6296.101.7.8.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpInspectLogRateChanged 1.3.6.1.4.1.6296.101.7.8.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpACL 1.3.6.1.4.1.6296.101.7.8.2
OBJECT IDENTIFIER    

sleArpAclTable 1.3.6.1.4.1.6296.101.7.8.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleArpAclEntry

sleArpAclEntry 1.3.6.1.4.1.6296.101.7.8.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleArpAclEntry  

sleArpAclIndex 1.3.6.1.4.1.6296.101.7.8.2.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleArpAclName 1.3.6.1.4.1.6296.101.7.8.2.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleArpAclNumEntries 1.3.6.1.4.1.6296.101.7.8.2.1.1.3
Number of Entries
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleArpAclControl 1.3.6.1.4.1.6296.101.7.8.2.2
OBJECT IDENTIFIER    

sleArpAclControlRequest 1.3.6.1.4.1.6296.101.7.8.2.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createArpAcl(1), destroyArpAcl(2)  

sleArpAclControlStatus 1.3.6.1.4.1.6296.101.7.8.2.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleArpAclControlTimer 1.3.6.1.4.1.6296.101.7.8.2.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleArpAclControlTimeStamp 1.3.6.1.4.1.6296.101.7.8.2.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleArpAclControlReqResult 1.3.6.1.4.1.6296.101.7.8.2.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleArpAclControlIndex 1.3.6.1.4.1.6296.101.7.8.2.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleArpAclControlName 1.3.6.1.4.1.6296.101.7.8.2.2.7
The name of acl.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleArpAclNotifications 1.3.6.1.4.1.6296.101.7.8.2.3
OBJECT IDENTIFIER    

sleArpAclCreated 1.3.6.1.4.1.6296.101.7.8.2.3.1
sleArpInspectValidateControl
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpAclDestroyed 1.3.6.1.4.1.6296.101.7.8.2.3.2
sleArpInspectValidateControl
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpACLRule 1.3.6.1.4.1.6296.101.7.8.3
OBJECT IDENTIFIER    

sleArpAclRuleTable 1.3.6.1.4.1.6296.101.7.8.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleArpAclRuleEntry

sleArpAclRuleEntry 1.3.6.1.4.1.6296.101.7.8.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleArpAclRuleEntry  

sleArpAclRuleAclIndex 1.3.6.1.4.1.6296.101.7.8.3.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

sleArpAclRuleIndex 1.3.6.1.4.1.6296.101.7.8.3.1.1.2
ACL entry Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

sleArpAclRuleAction 1.3.6.1.4.1.6296.101.7.8.3.1.1.3
The permit/deny control used per entry
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

sleArpAclRuleType 1.3.6.1.4.1.6296.101.7.8.3.1.1.4
Specify IP address is host or range.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER subnet(0), range(1), dhcpSnooping(2)  

sleArpAclRuleRangeStartIP 1.3.6.1.4.1.6296.101.7.8.3.1.1.5
Valid if sleArpAclEntryRange is 1,Otherwise this value is invalid.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleArpAclRuleRangeEndIP 1.3.6.1.4.1.6296.101.7.8.3.1.1.6
Valid if sleArpAclEntryRange is 1,Otherwise this value is invalid.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleArpAclRuleIPAddress 1.3.6.1.4.1.6296.101.7.8.3.1.1.7
IP Address.Valid if sleArpAclEntryRange is 0.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleArpAclRuleIPMask 1.3.6.1.4.1.6296.101.7.8.3.1.1.8
SubnetMask.Valid if sleArpAclEntryRange is 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..32  

sleArpAclRuleMacAddr 1.3.6.1.4.1.6296.101.7.8.3.1.1.9
Mac Address. If sleArpAclEntryMacType is 0 , this value is invalid.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sleArpAclRuleMacType 1.3.6.1.4.1.6296.101.7.8.3.1.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), host(1)  

sleArpAclRuleControl 1.3.6.1.4.1.6296.101.7.8.3.2
OBJECT IDENTIFIER    

sleArpAclRuleControlRequest 1.3.6.1.4.1.6296.101.7.8.3.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createArpAclRule(1), destroyArpAclRule(2)  

sleArpAclRuleControlStatus 1.3.6.1.4.1.6296.101.7.8.3.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleArpAclRuleControlTimer 1.3.6.1.4.1.6296.101.7.8.3.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleArpAclRuleControlTimeStamp 1.3.6.1.4.1.6296.101.7.8.3.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleArpAclRuleControlReqResult 1.3.6.1.4.1.6296.101.7.8.3.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleArpAclRuleControlAclIndex 1.3.6.1.4.1.6296.101.7.8.3.2.6
The name of acl.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleArpAclRuleControlIndex 1.3.6.1.4.1.6296.101.7.8.3.2.7
The entry index within ACL
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleArpAclRuleControlAction 1.3.6.1.4.1.6296.101.7.8.3.2.8
The permit/deny control used per entry
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

sleArpAclRuleControlType 1.3.6.1.4.1.6296.101.7.8.3.2.9
If type of entry is 1, sleArpAclEntryControlType must be 0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER subnet(0), range(1), dhcpSnooping(2)  

sleArpAclRuleControlRangeStartIP 1.3.6.1.4.1.6296.101.7.8.3.2.10
Description
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleArpAclRuleControlRangeEndIP 1.3.6.1.4.1.6296.101.7.8.3.2.11
Description
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleArpAclRuleControlIPAddress 1.3.6.1.4.1.6296.101.7.8.3.2.12
Description
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleArpAclRuleControlIPMask 1.3.6.1.4.1.6296.101.7.8.3.2.13
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

sleArpAclRuleControlMacAddr 1.3.6.1.4.1.6296.101.7.8.3.2.14
Description
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sleArpAclRuleControlMacType 1.3.6.1.4.1.6296.101.7.8.3.2.15
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), host(1)  

sleArpAclRuleNotifications 1.3.6.1.4.1.6296.101.7.8.3.3
OBJECT IDENTIFIER    

sleArpAclRuleCreated 1.3.6.1.4.1.6296.101.7.8.3.3.1
createArpAclEntry
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpAclRuleDestroyed 1.3.6.1.4.1.6296.101.7.8.3.3.2
destroyArpAclEntry
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpInspectVlan 1.3.6.1.4.1.6296.101.7.8.4
OBJECT IDENTIFIER    

sleArpInspectVlanTable 1.3.6.1.4.1.6296.101.7.8.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleArpInspectVlanEntry

sleArpInspectVlanEntry 1.3.6.1.4.1.6296.101.7.8.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleArpInspectVlanEntry  

sleArpInspectVlanIndex 1.3.6.1.4.1.6296.101.7.8.4.1.1.1
The index of vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

sleArpInspectVlanEnable 1.3.6.1.4.1.6296.101.7.8.4.1.1.2
The enable/disable control used per vlan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleArpInspectVlanFilterAcl 1.3.6.1.4.1.6296.101.7.8.4.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleArpInspectVlanFwdPktCnt 1.3.6.1.4.1.6296.101.7.8.4.1.1.4
Forwarded arp packet count.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleArpInspectVlanDropPktCnt 1.3.6.1.4.1.6296.101.7.8.4.1.1.5
Droped arp packet count.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleArpInspectVlanAclPermits 1.3.6.1.4.1.6296.101.7.8.4.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleArpInspectVlanAclDrops 1.3.6.1.4.1.6296.101.7.8.4.1.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleArpInspectVlanSrcMacFailurs 1.3.6.1.4.1.6296.101.7.8.4.1.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleArpInspectVlanDstMacFailurs 1.3.6.1.4.1.6296.101.7.8.4.1.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleArpInspectVlanIpAddrFailurs 1.3.6.1.4.1.6296.101.7.8.4.1.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleArpInspectVlanFilterAclName 1.3.6.1.4.1.6296.101.7.8.4.1.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleArpInspectVlanControl 1.3.6.1.4.1.6296.101.7.8.4.2
OBJECT IDENTIFIER    

sleArpInspectVlanControlRequest 1.3.6.1.4.1.6296.101.7.8.4.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setArpInspectVlanProfile(1), clearArpInspectVlanStatistics(2)  

sleArpInspectVlanControlStatus 1.3.6.1.4.1.6296.101.7.8.4.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleArpInspectVlanControlTimer 1.3.6.1.4.1.6296.101.7.8.4.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleArpInspectVlanControlTimeStamp 1.3.6.1.4.1.6296.101.7.8.4.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleArpInspectVlanControlReqResult 1.3.6.1.4.1.6296.101.7.8.4.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleArpInspectVlanControlIndex 1.3.6.1.4.1.6296.101.7.8.4.2.6
The index of vlan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

sleArpInspectVlanControlEnable 1.3.6.1.4.1.6296.101.7.8.4.2.7
The enable/disable control used per vlan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleArpInspectVlanControlFilterAcl 1.3.6.1.4.1.6296.101.7.8.4.2.8
The ARP Access-list Name to be applied to vlan
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleArpInspectVlanNotifications 1.3.6.1.4.1.6296.101.7.8.4.3
OBJECT IDENTIFIER    

sleArpInspectVlanChanged 1.3.6.1.4.1.6296.101.7.8.4.3.1
setArpInspectVlanProfile
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpInspectPort 1.3.6.1.4.1.6296.101.7.8.5
OBJECT IDENTIFIER    

sleArpInspectPortTable 1.3.6.1.4.1.6296.101.7.8.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleArpInspectPortEntry

sleArpInspectPortEntry 1.3.6.1.4.1.6296.101.7.8.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleArpInspectPortEntry  

sleArpInspectPortIndex 1.3.6.1.4.1.6296.101.7.8.5.1.1.1
The index of port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

sleArpInspectPortTrust 1.3.6.1.4.1.6296.101.7.8.5.1.1.2
The trust/untrust control used per port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER untrust(0), trust(1)  

sleArpInspectPortControl 1.3.6.1.4.1.6296.101.7.8.5.2
OBJECT IDENTIFIER    

sleArpInspectPortControlRequest 1.3.6.1.4.1.6296.101.7.8.5.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setArpInspectTrustPort(1)  

sleArpInspectPortControlStatus 1.3.6.1.4.1.6296.101.7.8.5.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleArpInspectPortControlTimer 1.3.6.1.4.1.6296.101.7.8.5.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleArpInspectPortControlTimeStamp 1.3.6.1.4.1.6296.101.7.8.5.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleArpInspectPortControlReqResult 1.3.6.1.4.1.6296.101.7.8.5.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleArpInspectPortControlIndex 1.3.6.1.4.1.6296.101.7.8.5.2.6
The index of port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

sleArpInspectPortControlTrust 1.3.6.1.4.1.6296.101.7.8.5.2.7
The enable/disable control used per port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER untrust(0), trust(1)  

sleArpInspectPortNotifications 1.3.6.1.4.1.6296.101.7.8.5.3
OBJECT IDENTIFIER    

sleArpInspectPortChanged 1.3.6.1.4.1.6296.101.7.8.5.3.1
setArpInspectTrustPort
Status: current Access: read-write
NOTIFICATION-TYPE    

sleArpInspectInvalidLog 1.3.6.1.4.1.6296.101.7.8.6
OBJECT IDENTIFIER    

sleArpInspectInvalidLogTable 1.3.6.1.4.1.6296.101.7.8.6.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleArpInspectInvalidLogEntry

sleArpInspectInvalidLogEntry 1.3.6.1.4.1.6296.101.7.8.6.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleArpInspectInvalidLogEntry  

sleArpInspectInvalidLogId 1.3.6.1.4.1.6296.101.7.8.6.1.1.1
ARP inspection invalid index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleArpInspectInvalidLogReason 1.3.6.1.4.1.6296.101.7.8.6.1.1.2
ARP inspection invalid reason.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER aliReasonNone(0), aliReasonDhcpPermit(1), aliReasonDhcpDeny(2), aliReasonAclPermit(3), aliReasonAclDeny(4), aliReasonValidSrcfail(5), aliReasonValidDstfail(6), aliReasonValidIpfail(7)  

sleArpInspectInvalidLogSamePktCnt 1.3.6.1.4.1.6296.101.7.8.6.1.1.3
ARP inspection invalid same packet counters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleArpInspectInvalidLogOpcode 1.3.6.1.4.1.6296.101.7.8.6.1.1.4
ARP protocol opcodes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER arpopRequest(1), arpopReply(2)  

sleArpInspectInvalidLogPortNumber 1.3.6.1.4.1.6296.101.7.8.6.1.1.5
ARP inspection invalid port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sleArpInspectInvalidLogVlanId 1.3.6.1.4.1.6296.101.7.8.6.1.1.6
ARP inspection invalid vlan id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sleArpInspectInvalidLogSrcMacAddr 1.3.6.1.4.1.6296.101.7.8.6.1.1.7
ARP inspection invalid source mac address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

sleArpInspectInvalidLogSrcIpAddr 1.3.6.1.4.1.6296.101.7.8.6.1.1.8
ARP inspection invalid source IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleArpInspectInvalidLogDstMacAddr 1.3.6.1.4.1.6296.101.7.8.6.1.1.9
ARP inspection invalid destination mac address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

sleArpInspectInvalidLogDstIpAddr 1.3.6.1.4.1.6296.101.7.8.6.1.1.10
ARP inspection invalid destination IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleArpInspectInvalidLogLastRecvTime 1.3.6.1.4.1.6296.101.7.8.6.1.1.11
ARP inspection invalid packet last received time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttack 1.3.6.1.4.1.6296.101.7.9
OBJECT IDENTIFIER    

sleSecurityAttackBasic 1.3.6.1.4.1.6296.101.7.9.1
OBJECT IDENTIFIER    

sleSecurityAttackBasicBase 1.3.6.1.4.1.6296.101.7.9.1.1
OBJECT IDENTIFIER    

sleSecurityAttackBasicBaseInfo 1.3.6.1.4.1.6296.101.7.9.1.1.1
OBJECT IDENTIFIER    

sleSecurityAttackBasicBaseInfoGlobalStatus 1.3.6.1.4.1.6296.101.7.9.1.1.1.1
The port attack global status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackBasicBaseDosStatus 1.3.6.1.4.1.6296.101.7.9.1.1.1.2
The DOS status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackBasicBaseScanStatus 1.3.6.1.4.1.6296.101.7.9.1.1.1.3
The Scan status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackBasicBaseCollectInterval 1.3.6.1.4.1.6296.101.7.9.1.1.1.4
The sampling interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicBaseControl 1.3.6.1.4.1.6296.101.7.9.1.1.2
OBJECT IDENTIFIER    

sleSecurityAttackBasicBaseControlRequest 1.3.6.1.4.1.6296.101.7.9.1.1.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setSecurityAttackGlobalStatus(1), setSecurityAttackDosStatus(2), setSecurityAttackScanStatus(3), setSecurityAttackCollectInterval(4), setSecurityAttackAllConfig(5)  

sleSecurityAttackBasicBaseControlStatus 1.3.6.1.4.1.6296.101.7.9.1.1.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityAttackBasicBaseControlTimer 1.3.6.1.4.1.6296.101.7.9.1.1.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityAttackBasicBaseControlTimeStamp 1.3.6.1.4.1.6296.101.7.9.1.1.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSecurityAttackBasicBaseControlReqResult 1.3.6.1.4.1.6296.101.7.9.1.1.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityAttackBasicBaseControlGlobalStatus 1.3.6.1.4.1.6296.101.7.9.1.1.2.6
The port attack global status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackBasicBaseControlDosStatus 1.3.6.1.4.1.6296.101.7.9.1.1.2.7
The DOS status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackBasicBaseControlScanStatus 1.3.6.1.4.1.6296.101.7.9.1.1.2.8
The Scan status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackBasicBaseControlCollectInterval 1.3.6.1.4.1.6296.101.7.9.1.1.2.9
The sampling interval
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicBaseNotification 1.3.6.1.4.1.6296.101.7.9.1.1.3
OBJECT IDENTIFIER    

sleSecurityAttackBasicBaseGlobalStatusChanged 1.3.6.1.4.1.6296.101.7.9.1.1.3.1
setSecurityAttackGlobalStatus
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicBaseDosStatusChanged 1.3.6.1.4.1.6296.101.7.9.1.1.3.2
setSecurityAttackDosStatus
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicBaseScanStatusChanged 1.3.6.1.4.1.6296.101.7.9.1.1.3.3
setSecurityAttackScanStatus
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicBaseCollectIntervalChanged 1.3.6.1.4.1.6296.101.7.9.1.1.3.4
setSecurityAttackCollectInterval
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicBaseAllConfigChanged 1.3.6.1.4.1.6296.101.7.9.1.1.3.5
setSecurityAttackAllConfig
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicPolicy 1.3.6.1.4.1.6296.101.7.9.1.2
OBJECT IDENTIFIER    

sleSecurityAttackBasicPolicyInfo 1.3.6.1.4.1.6296.101.7.9.1.2.1
OBJECT IDENTIFIER    

sleSecurityAttackBasicPolicyAttackType 1.3.6.1.4.1.6296.101.7.9.1.2.1.1
The port attack type.
Status: current Access: read-only
OBJECT-TYPE    
  BITS none(0), tcpDosAttack(1), udpDosAttack(2), icmpDosAttack(3), hostScan(4), portScan(5)  

sleSecurityAttackBasicPolicyBlockTime 1.3.6.1.4.1.6296.101.7.9.1.2.1.2
The block time of port attack. (10-86400 sec)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackBasicPolicyThresholdCount 1.3.6.1.4.1.6296.101.7.9.1.2.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackBasicPolicyCollectPorts 1.3.6.1.4.1.6296.101.7.9.1.2.1.4
The Collect ports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackBasicPolicyControl 1.3.6.1.4.1.6296.101.7.9.1.2.2
OBJECT IDENTIFIER    

sleSecurityAttackBasicPolicyControlRequest 1.3.6.1.4.1.6296.101.7.9.1.2.2.1
Decsription
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setSecurityAttackBasicPolicyBlockTime(1), setSecurityAttackBasicPolicyThresholdCount(2), setSecurityAttackBasicPolicyCollectPorts(3), setSecurityAttackBasicPolicyAllConfig(4)  

sleSecurityAttackBasicPolicyControlStatus 1.3.6.1.4.1.6296.101.7.9.1.2.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityAttackBasicPolicyControlTimer 1.3.6.1.4.1.6296.101.7.9.1.2.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityAttackBasicPolicyControlTimeStamp 1.3.6.1.4.1.6296.101.7.9.1.2.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSecurityAttackBasicPolicyControlReqResult 1.3.6.1.4.1.6296.101.7.9.1.2.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityAttackBasicPolicyControlAttackType 1.3.6.1.4.1.6296.101.7.9.1.2.2.6
The port attack type.
Status: current Access: read-write
OBJECT-TYPE    
  BITS none(0), tcpDosAttack(1), udpDosAttack(2), icmpDosAttack(3), hostScan(4), portScan(5)  

sleSecurityAttackBasicPolicyControlBlockTime 1.3.6.1.4.1.6296.101.7.9.1.2.2.7
The block time of port attack. (10-86400 sec)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackBasicPolicyControlThresholdCount 1.3.6.1.4.1.6296.101.7.9.1.2.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackBasicPolicyControlCollectPorts 1.3.6.1.4.1.6296.101.7.9.1.2.2.9
The Collect ports.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackBasicPolicyNotification 1.3.6.1.4.1.6296.101.7.9.1.2.3
OBJECT IDENTIFIER    

sleSecurityAttackBasicPolicyBlockTimeChanged 1.3.6.1.4.1.6296.101.7.9.1.2.3.1
setSecurityAttackBasicPolicyBlockTime
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicPolicyThresholdCountChanged 1.3.6.1.4.1.6296.101.7.9.1.2.3.2
setSecurityAttackBasicPolicyThresholdCount
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicPolicyCollectPortsChanged 1.3.6.1.4.1.6296.101.7.9.1.2.3.3
setSecurityAttackBasicPolicyCollectPorts
Status: current Access: read-write
NOTIFICATION-TYPE    

setSecurityAttackBasicPolicyAllConfigChanged 1.3.6.1.4.1.6296.101.7.9.1.2.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicExceptList 1.3.6.1.4.1.6296.101.7.9.1.3
OBJECT IDENTIFIER    

sleSecurityAttackBasicExceptListTable 1.3.6.1.4.1.6296.101.7.9.1.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSecurityAttackBasicExceptListEntry

sleSecurityAttackBasicExceptListEntry 1.3.6.1.4.1.6296.101.7.9.1.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSecurityAttackBasicExceptListEntry  

sleSecurityAttackBasicExceptListIndex 1.3.6.1.4.1.6296.101.7.9.1.3.1.1.1
The Rule index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSecurityAttackBasicExceptListProtocolType 1.3.6.1.4.1.6296.101.7.9.1.3.1.1.2
The protocol type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), tcp(1), udp(2), icmp(3)  

sleSecurityAttackBasicExceptListSourceIpAddress 1.3.6.1.4.1.6296.101.7.9.1.3.1.1.3
The source IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicExceptListDestinationIpAddress 1.3.6.1.4.1.6296.101.7.9.1.3.1.1.4
The destination IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicExceptListIngressPort 1.3.6.1.4.1.6296.101.7.9.1.3.1.1.5
The ingress port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSecurityAttackBasicExceptListControl 1.3.6.1.4.1.6296.101.7.9.1.3.2
OBJECT IDENTIFIER    

sleSecurityAttackBasicExceptListControlRequest 1.3.6.1.4.1.6296.101.7.9.1.3.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createSecurityAttackBasicExceptList(1), modifySecurityAttackBasicExceptList(2), delSecurityAttackBasicExceptList(3)  

sleSecurityAttackBasicExceptListControlStatus 1.3.6.1.4.1.6296.101.7.9.1.3.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityAttackBasicExceptListControlTimer 1.3.6.1.4.1.6296.101.7.9.1.3.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityAttackBasicExceptListControlTimeStamp 1.3.6.1.4.1.6296.101.7.9.1.3.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSecurityAttackBasicExceptListControlReqResult 1.3.6.1.4.1.6296.101.7.9.1.3.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityAttackBasicExceptListControlRuleIndex 1.3.6.1.4.1.6296.101.7.9.1.3.2.6
The rule index of except list. It's specific nuber per each rule.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicExceptListControlProtocolType 1.3.6.1.4.1.6296.101.7.9.1.3.2.7
The port attack block time (default:300 sec)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), tcp(1), udp(2), icmp(3)  

sleSecurityAttackBasicExceptListControlSourceIpAddress 1.3.6.1.4.1.6296.101.7.9.1.3.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicExceptListControlDestinationIpAddress 1.3.6.1.4.1.6296.101.7.9.1.3.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicExceptListControlIngressPort 1.3.6.1.4.1.6296.101.7.9.1.3.2.10
The ingress port
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicExceptListNotification 1.3.6.1.4.1.6296.101.7.9.1.3.3
OBJECT IDENTIFIER    

sleSecurityAttackBasicExceptListCreated 1.3.6.1.4.1.6296.101.7.9.1.3.3.1
createSecurityAttackBasicExceptList
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicExceptListChanged 1.3.6.1.4.1.6296.101.7.9.1.3.3.2
modifySecurityAttackBasicExceptList
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicExceptListDeleted 1.3.6.1.4.1.6296.101.7.9.1.3.3.3
delSecurityAttackBasicExceptList
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicBlackList 1.3.6.1.4.1.6296.101.7.9.1.4
OBJECT IDENTIFIER    

sleSecurityAttackBasicBlackListTable 1.3.6.1.4.1.6296.101.7.9.1.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSecurityAttackBasicBlackListEntry

sleSecurityAttackBasicBlackListEntry 1.3.6.1.4.1.6296.101.7.9.1.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSecurityAttackBasicBlackListEntry  

sleSecurityAttackBasicBlackListIndex 1.3.6.1.4.1.6296.101.7.9.1.4.1.1.1
The Rule index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSecurityAttackBasicBlackListProtocolType 1.3.6.1.4.1.6296.101.7.9.1.4.1.1.2
The protocol type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), tcp(1), udp(2), icmp(3)  

sleSecurityAttackBasicBlackListSourceIpAddress 1.3.6.1.4.1.6296.101.7.9.1.4.1.1.3
The source IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicBlackListDestinationIpAddress 1.3.6.1.4.1.6296.101.7.9.1.4.1.1.4
The destination IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicBlackListBlockingStatus 1.3.6.1.4.1.6296.101.7.9.1.4.1.1.5
The blocking status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackBasicBlackListIgressPort 1.3.6.1.4.1.6296.101.7.9.1.4.1.1.6
The engress port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicBlackListControl 1.3.6.1.4.1.6296.101.7.9.1.4.2
OBJECT IDENTIFIER    

sleSecurityAttackBasicBlackListControlRequest 1.3.6.1.4.1.6296.101.7.9.1.4.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createSecurityAttackBasicBlackList(1), delSecurityAttackBasicBlackList(2)  

sleSecurityAttackBasicBlackListControlStatus 1.3.6.1.4.1.6296.101.7.9.1.4.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityAttackBasicBlackListControlTimer 1.3.6.1.4.1.6296.101.7.9.1.4.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityAttackBasicBlackListControlTimeStamp 1.3.6.1.4.1.6296.101.7.9.1.4.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSecurityAttackBasicBlackListControlReqResult 1.3.6.1.4.1.6296.101.7.9.1.4.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityAttackBasicBlackListControlRuleIndex 1.3.6.1.4.1.6296.101.7.9.1.4.2.6
The rule index of except list. It's specific nuber per each rule.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicBlackListControlProtocolType 1.3.6.1.4.1.6296.101.7.9.1.4.2.7
The port attack block time (default:300 sec)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), tcp(1), udp(2), icmp(3)  

sleSecurityAttackBasicBlackListControlSourceIpAddress 1.3.6.1.4.1.6296.101.7.9.1.4.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicBlackListControlDestinationIpAddress 1.3.6.1.4.1.6296.101.7.9.1.4.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicBlackListControlIngressPort 1.3.6.1.4.1.6296.101.7.9.1.4.2.10
The engress port
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicBlackListNotification 1.3.6.1.4.1.6296.101.7.9.1.4.3
OBJECT IDENTIFIER    

sleSecurityAttackBasicBlackListCreated 1.3.6.1.4.1.6296.101.7.9.1.4.3.1
createSecurityAttackBasicBlackList
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicBlackListDeleted 1.3.6.1.4.1.6296.101.7.9.1.4.3.2
setSecurityAttackBasicBlackList
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicBlockedList 1.3.6.1.4.1.6296.101.7.9.1.5
OBJECT IDENTIFIER    

sleSecurityAttackBasicBlockedListTable 1.3.6.1.4.1.6296.101.7.9.1.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSecurityAttackBasicBlockedListEntry

sleSecurityAttackBasicBlockedListEntry 1.3.6.1.4.1.6296.101.7.9.1.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSecurityAttackBasicBlockedListEntry  

sleSecurityAttackBasicBlockedListIndex 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.1
The Rule index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSecurityAttackBasicBlockedListAttackType 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.2
The port attack type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), tcpDosAttack(1), udpDosAttack(2), icmpDosAttack(3), hostScan(4), portScan(5), staticAttack(6)  

sleSecurityAttackBasicBlockedListStartTime 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.3
The start time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackBasicBlockedListEndTime 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.4
The End Time
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackBasicBlockedListAttackSourceIp 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.5
The attack source ip address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicBlockedListAttackDestinationIp 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.6
The attack Destination ip address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackBasicBlockedListProtocol 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.7
The protocol type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), tcp(1), udp(2), icmp(3), arp(4)  

sleSecurityAttackBasicBlockedListAttackPktCount 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.8
The attack packet per second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleSecurityAttackBasicBlockedListAttackBlockTime 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.9
The attack block time.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 10..86400  

sleSecurityAttackBasicBlockedListBlackListIndex 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.10
The Black list index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicBlockedListIgressPort 1.3.6.1.4.1.6296.101.7.9.1.5.1.1.11
The engress port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicBlockedListControl 1.3.6.1.4.1.6296.101.7.9.1.5.2
OBJECT IDENTIFIER    

sleSecurityAttackBasicBlockedListControlRequest 1.3.6.1.4.1.6296.101.7.9.1.5.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setSecurityAttackBasicBlockTime(1), delSecurityAttackBasicBlockList(2)  

sleSecurityAttackBasicBlockedListControlStatus 1.3.6.1.4.1.6296.101.7.9.1.5.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityAttackBasicBlockedListControlTimer 1.3.6.1.4.1.6296.101.7.9.1.5.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityAttackBasicBlockedListControlTimeStamp 1.3.6.1.4.1.6296.101.7.9.1.5.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSecurityAttackBasicBlockedListControlReqResult 1.3.6.1.4.1.6296.101.7.9.1.5.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityAttackBasicBlockedListControlRuleIndex 1.3.6.1.4.1.6296.101.7.9.1.5.2.6
The Rule index of blocked list. It's specific nuber per each rule.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackBasicBlockedListControlBlockTime 1.3.6.1.4.1.6296.101.7.9.1.5.2.7
The port attack block time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..86400  

sleSecurityAttackBasicBlockedListNotification 1.3.6.1.4.1.6296.101.7.9.1.5.3
OBJECT IDENTIFIER    

sleSecurityAttackBasicBlockedListBlockTimeChanged 1.3.6.1.4.1.6296.101.7.9.1.5.3.1
setSecurityAttackBasicBlockTime
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackBasicBlockedListDeleted 1.3.6.1.4.1.6296.101.7.9.1.5.3.2
delSecurityAttackBasicBlockList
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackExpansion 1.3.6.1.4.1.6296.101.7.9.2
OBJECT IDENTIFIER    

sleSecurityAttackExpansionBase 1.3.6.1.4.1.6296.101.7.9.2.1
OBJECT IDENTIFIER    

sleSecurityAttackExpansionBaseInfo 1.3.6.1.4.1.6296.101.7.9.2.1.1
OBJECT IDENTIFIER    

sleSecurityAttackExpansionBaseGlobalStatus 1.3.6.1.4.1.6296.101.7.9.2.1.1.1
The port attack global status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackExpansionBaseControl 1.3.6.1.4.1.6296.101.7.9.2.1.2
OBJECT IDENTIFIER    

sleSecurityAttackExpansionBaseControlRequest 1.3.6.1.4.1.6296.101.7.9.2.1.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setSecurityAttackExpansionGlobalStatus(1)  

sleSecurityAttackExpansionBaseControlStatus 1.3.6.1.4.1.6296.101.7.9.2.1.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityAttackExpansionBaseControlTimer 1.3.6.1.4.1.6296.101.7.9.2.1.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityAttackExpansionBaseControlTimeStamp 1.3.6.1.4.1.6296.101.7.9.2.1.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSecurityAttackExpansionBaseControlReqResult 1.3.6.1.4.1.6296.101.7.9.2.1.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityAttackExpansionBaseControlGlobalStatus 1.3.6.1.4.1.6296.101.7.9.2.1.2.6
The port attack global status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackExpansionBaseNotification 1.3.6.1.4.1.6296.101.7.9.2.1.3
OBJECT IDENTIFIER    

sleSecurityAttackExpansionBaseGlobalStatusChanged 1.3.6.1.4.1.6296.101.7.9.2.1.3.1
setSecurityAttackExpansionGlobalStatus
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackExpansionPolicy 1.3.6.1.4.1.6296.101.7.9.2.2
OBJECT IDENTIFIER    

sleSecurityAttackExpansionPolicyTable 1.3.6.1.4.1.6296.101.7.9.2.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSecurityAttackExpansionPolicyEntry

sleSecurityAttackExpansionPolicyEntry 1.3.6.1.4.1.6296.101.7.9.2.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSecurityAttackExpansionPolicyEntry  

sleSecurityAttackExpansionPolicyPortIndex 1.3.6.1.4.1.6296.101.7.9.2.2.1.1.1
The Port Index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSecurityAttackExpansionPolicyStatus 1.3.6.1.4.1.6296.101.7.9.2.2.1.1.2
The Port attack feature status(This OID is only for GET).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSecurityAttackExpansionPolicyAttackType 1.3.6.1.4.1.6296.101.7.9.2.2.1.1.3
The policy status of port attack type.
Status: current Access: read-only
OBJECT-TYPE    
  BITS none(0), tcpDosAttack(1), tcpPortFlooding(2), tcpHostRandomFlooding(3), tcpHostScanning(4), ipSppfing(5), udpDosAttack(6), udpPortFlooding(7), udpHostRandomFlooding(8), udpHostScanning(9), udpIPSppfing(10), icmpDosAttack(11), icmpIPSppfing(12), icmpHostScanning(13), arpMacFlooding(14), arpSpoofing(15), decoySnare(16), hostScan(17), portScan(18), tcpPortScanning(19), udpPortScanning(20), staticAttack(21)  

sleSecurityAttackExpansionPolicyBlockTime 1.3.6.1.4.1.6296.101.7.9.2.2.1.1.4
The block time of port attack. (10-86400 sec)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackExpansionPolicyControl 1.3.6.1.4.1.6296.101.7.9.2.2.2
OBJECT IDENTIFIER    

sleSecurityAttackExpansionPolicyControlRequest 1.3.6.1.4.1.6296.101.7.9.2.2.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setSecurityAttackExpansionPolicy(1)  

sleSecurityAttackExpansionPolicyControlStatus 1.3.6.1.4.1.6296.101.7.9.2.2.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityAttackExpansionPolicyControlTimer 1.3.6.1.4.1.6296.101.7.9.2.2.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityAttackExpansionPolicyControlTimeStamp 1.3.6.1.4.1.6296.101.7.9.2.2.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSecurityAttackExpansionPolicyControlReqResult 1.3.6.1.4.1.6296.101.7.9.2.2.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityAttackExpansionPolicyControlPortIndex 1.3.6.1.4.1.6296.101.7.9.2.2.2.6
The port index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionPolicyControlAttackType 1.3.6.1.4.1.6296.101.7.9.2.2.2.7
The port attack type.
Status: current Access: read-write
OBJECT-TYPE    
  BITS none(0), tcpDosAttack(1), tcpPortFlooding(2), tcpHostRandomFlooding(3), tcpHostScanning(4), ipSppfing(5), udpDosAttack(6), udpPortFlooding(7), udpHostRandomFlooding(8), udpHostScanning(9), udpIPSppfing(10), icmpDosAttack(11), icmpIPSppfing(12), icmpHostScanning(13), arpMacFlooding(14), arpSpoofing(15), decoySnare(16), hostScan(17), portScan(18), tcpPortScanning(19), udpPortScanning(20), staticAttack(21)  

sleSecurityAttackExpansionPolicyControlBlockTime 1.3.6.1.4.1.6296.101.7.9.2.2.2.8
The block time of port attack. (10-86400 sec)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackExpansionPolicyNotification 1.3.6.1.4.1.6296.101.7.9.2.2.3
OBJECT IDENTIFIER    

sleSecurityAttackExpansionPolicyChanged 1.3.6.1.4.1.6296.101.7.9.2.2.3.1
setSecurityAttackExpansionPolicy
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackExpansionExceptList 1.3.6.1.4.1.6296.101.7.9.2.3
OBJECT IDENTIFIER    

sleSecurityAttackExpansionExceptListTable 1.3.6.1.4.1.6296.101.7.9.2.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSecurityAttackExpansionExceptListEntry

sleSecurityAttackExpansionExceptListEntry 1.3.6.1.4.1.6296.101.7.9.2.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSecurityAttackExpansionExceptListEntry  

sleSecurityAttackExpansionExceptListPortIndex 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSecurityAttackExpansionExceptListIndex 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.2
The except list index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSecurityAttackExpansionExceptListRuleIndex 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.3
The rule index. It's specific nuber per each rule.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListProtocolType 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.4
The protocol type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), tcp(1), udp(2), icmp(3), arp(4)  

sleSecurityAttackExpansionExceptListSourceType 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.5
The Source Type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), ip(1), mac(2)  

sleSecurityAttackExpansionExceptListSourceIpAddress 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.6
The source IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackExpansionExceptListSourceIpMask 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.7
The source IP address mask
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListSourceMac 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.8
The source MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackExpansionExceptListSourcePortType 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.9
The source port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), equal(1), range(2)  

sleSecurityAttackExpansionExceptListSourcePortFrom 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.10
SourcePort Type is Any then 0 Equal then portNo Range then From PortNo
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListSourcePortTo 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.11
SourcePort Type is Any then 0 Equal then portNo Range then From PortNo
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListDestinationType 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.12
The destination Type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), ip(1), mac(2)  

sleSecurityAttackExpansionExceptListDestinationIpAddress 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.13
The destination IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackExpansionExceptListDestinationIpMask 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.14
The destination IP address mask
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListDestinationMac 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.15
The source MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackExpansionExceptListDestinationPortType 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.16
The destination port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), equal(1), range(2)  

sleSecurityAttackExpansionExceptListDestinationPortFrom 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.17
Destination Port Type is Any then 0 Equal then portNo Range then From PortNo
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListDestinationPortTo 1.3.6.1.4.1.6296.101.7.9.2.3.1.1.18
Destination Port Type is Any then 0 Equal then portNo Range then From PortNo
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListControl 1.3.6.1.4.1.6296.101.7.9.2.3.2
OBJECT IDENTIFIER    

sleSecurityAttackExpansionExceptListControlRequest 1.3.6.1.4.1.6296.101.7.9.2.3.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createSecurityAttackExpansionExceptList(1), modifyPortAttackExpansionExceptList(2), delPortAttackExpansionExceptList(3)  

sleSecurityAttackExpansionExceptListControlStatus 1.3.6.1.4.1.6296.101.7.9.2.3.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityAttackExpansionExceptListControlTimer 1.3.6.1.4.1.6296.101.7.9.2.3.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityAttackExpansionExceptListControlTimeStamp 1.3.6.1.4.1.6296.101.7.9.2.3.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSecurityAttackExpansionExceptListControlReqResult 1.3.6.1.4.1.6296.101.7.9.2.3.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityAttackExpansionExceptListControlPortIndex 1.3.6.1.4.1.6296.101.7.9.2.3.2.6
The port index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListControlRuleIndex 1.3.6.1.4.1.6296.101.7.9.2.3.2.7
The rule index of except list. It's specific nuber per each rule.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListControlProtocolType 1.3.6.1.4.1.6296.101.7.9.2.3.2.8
The port attack block time (default:300 sec)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), tcp(1), udp(2), icmp(3), arp(4)  

sleSecurityAttackExpansionExceptListControlSourceType 1.3.6.1.4.1.6296.101.7.9.2.3.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), ip(1), mac(2)  

sleSecurityAttackExpansionExceptListControlSourceIpAddress 1.3.6.1.4.1.6296.101.7.9.2.3.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackExpansionExceptListControlSourceIpMask 1.3.6.1.4.1.6296.101.7.9.2.3.2.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListControlSourceMac 1.3.6.1.4.1.6296.101.7.9.2.3.2.12
The source MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackExpansionExceptListControlSourcePortType 1.3.6.1.4.1.6296.101.7.9.2.3.2.13
The destination port type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), equal(1), range(2)  

sleSecurityAttackExpansionExceptListControlSourcePortFrom 1.3.6.1.4.1.6296.101.7.9.2.3.2.14
Src Port Type is Any then 0 Equal then portNo Range then From PortNo
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListControlSourcePortTo 1.3.6.1.4.1.6296.101.7.9.2.3.2.15
Src Port Type is Any then 0 Equal then portNo Range then From PortNo
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListControlDestinationType 1.3.6.1.4.1.6296.101.7.9.2.3.2.16
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), ip(1), mac(2)  

sleSecurityAttackExpansionExceptListControlDestinationIpAddress 1.3.6.1.4.1.6296.101.7.9.2.3.2.17
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackExpansionExceptListControlDestinationIpMask 1.3.6.1.4.1.6296.101.7.9.2.3.2.18
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListControlDestinationMac 1.3.6.1.4.1.6296.101.7.9.2.3.2.19
The source MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListControlDestinationPortType 1.3.6.1.4.1.6296.101.7.9.2.3.2.20
The destination port type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), equal(1), range(2)  

sleSecurityAttackExpansionExceptListControlDestinationPortFrom 1.3.6.1.4.1.6296.101.7.9.2.3.2.21
Src Port Type is Any then 0 Equal then portNo Range then From PortNo
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListControlDestinationPortTo 1.3.6.1.4.1.6296.101.7.9.2.3.2.22
Src Port Type is Any then 0 Equal then portNo Range then From PortNo
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionExceptListNotification 1.3.6.1.4.1.6296.101.7.9.2.3.3
OBJECT IDENTIFIER    

sleSecurityAttackExpansionExceptListCreated 1.3.6.1.4.1.6296.101.7.9.2.3.3.1
createPortAttackExpansionExceptList
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackExpansionExceptListChanged 1.3.6.1.4.1.6296.101.7.9.2.3.3.2
modifyPortAttackExpansionExceptList
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackExpansionExceptListDeleted 1.3.6.1.4.1.6296.101.7.9.2.3.3.3
delPortAttackExpansionExceptList
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSecurityAttackExpansionBlockedList 1.3.6.1.4.1.6296.101.7.9.2.4
OBJECT IDENTIFIER    

sleSecurityAttackExpansionBlockedListTable 1.3.6.1.4.1.6296.101.7.9.2.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSecurityAttackExpansionBlockedListEntry

sleSecurityAttackExpansionBlockedListEntry 1.3.6.1.4.1.6296.101.7.9.2.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSecurityAttackExpansionBlockedListEntry  

sleSecurityAttackExpansionBlockedListPortIndex 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSecurityAttackExpansionBlockedListIndex 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.2
The blocked list index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSecurityAttackExpansionBlockedListRuleIndex 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.3
The Rule index of blocked list. It's specific nuber per each rule.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionBlockedListAttackType 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.4
The port attack type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), tcpDosAttack(1), tcpPortFlooding(2), tcpHostRandomFlooding(3), tcpHostScanning(4), ipSppfing(5), udpDosAttack(6), udpPortFlooding(7), udpHostRandomFlooding(8), udpHostScanning(9), udpIPSppfing(10), icmpDosAttack(11), icmpIPSppfing(12), icmpHostScanning(13), arpMacFlooding(14), arpSpoofing(15), decoySnare(16), hostScan(17), portScan(18), tcpPortScanning(19), udpPortScanning(20), staticAttack(21)  

sleSecurityAttackExpansionBlockedListAttackBlockType 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.5
The attack block type.
Status: current Access: read-only
OBJECT-TYPE    
  BITS none(0), sourceIp(1), sourceMac(2), sourcePort(3), destinationIp(4), destinationPort(5)  

sleSecurityAttackExpansionBlockedListStartTime 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.6
The start time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackExpansionBlockedListEndTime 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.7
The End Time
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackExpansionBlockedListAttackSourceIp 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.8
The attack source ip address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackExpansionBlockedListSourceMac 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.9
The attack source MAC address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSecurityAttackExpansionBlockedListAttackDestinationIp 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.10
The attack Destination ip address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSecurityAttackExpansionBlockedListProtocol 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.11
The protocol type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), tcp(1), udp(2), icmp(3), arp(4)  

sleSecurityAttackExpansionBlockedListSourcePort 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.12
The source port (0: any)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleSecurityAttackExpansionBlockedListDestinationPort 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.13
The destination port (0: any)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleSecurityAttackExpansionBlockedListAttackPktCount 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.14
The attack packet per second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleSecurityAttackExpansionBlockedListAttackBlockTime 1.3.6.1.4.1.6296.101.7.9.2.4.1.1.15
The attack block time.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1 | 10..86400  

sleSecurityAttackExpansionBlockedListControl 1.3.6.1.4.1.6296.101.7.9.2.4.2
OBJECT IDENTIFIER    

sleSecurityAttackExpansionBlockedListControlRequest 1.3.6.1.4.1.6296.101.7.9.2.4.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setPortAttackExpansionBlockTime(1)  

sleSecurityAttackExpansionBlockedListControlStatus 1.3.6.1.4.1.6296.101.7.9.2.4.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSecurityAttackExpansionBlockedListControlTimer 1.3.6.1.4.1.6296.101.7.9.2.4.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSecurityAttackExpansionBlockedListControlTimeStamp 1.3.6.1.4.1.6296.101.7.9.2.4.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSecurityAttackExpansionBlockedListControlReqResult 1.3.6.1.4.1.6296.101.7.9.2.4.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSecurityAttackExpansionBlockedListControlRuleIndex 1.3.6.1.4.1.6296.101.7.9.2.4.2.6
The Rule index of blocked list. It's specific nuber per each rule.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSecurityAttackExpansionBlockedListControlBlockTime 1.3.6.1.4.1.6296.101.7.9.2.4.2.7
The port attack block time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 10..86400  

sleSecurityAttackExpansionBlockedListNotification 1.3.6.1.4.1.6296.101.7.9.2.4.3
OBJECT IDENTIFIER    

sleSecurityAttackExpansionBlockedListBlockTimeChanged 1.3.6.1.4.1.6296.101.7.9.2.4.3.1
setPortAttackExpansionBlockTime
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDInspection 1.3.6.1.4.1.6296.101.7.12
OBJECT IDENTIFIER    

sleNDInspectBase 1.3.6.1.4.1.6296.101.7.12.1
OBJECT IDENTIFIER    

sleNDInspectBaseInfo 1.3.6.1.4.1.6296.101.7.12.1.1
OBJECT IDENTIFIER    

sleNDInspectLogBufferSize 1.3.6.1.4.1.6296.101.7.12.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1024  

sleNDInspectLogEntry 1.3.6.1.4.1.6296.101.7.12.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1024  

sleNDInspectLogInterval 1.3.6.1.4.1.6296.101.7.12.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..86400  

sleNDInspectBaseControl 1.3.6.1.4.1.6296.101.7.12.1.2
OBJECT IDENTIFIER    

sleNDInspectControlRequest 1.3.6.1.4.1.6296.101.7.12.1.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setNDInspectLogBufferSize(1), setNDInspectLogRate(2)  

sleNDInspectControlStatus 1.3.6.1.4.1.6296.101.7.12.1.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleNDInspectControlTimer 1.3.6.1.4.1.6296.101.7.12.1.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleNDInspectControlTimeStamp 1.3.6.1.4.1.6296.101.7.12.1.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleNDInspectControlReqResult 1.3.6.1.4.1.6296.101.7.12.1.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleNDInspectControlLogBufferSize 1.3.6.1.4.1.6296.101.7.12.1.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1024  

sleNDInspectControlLogEntry 1.3.6.1.4.1.6296.101.7.12.1.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1024  

sleNDInspectControlLogInterval 1.3.6.1.4.1.6296.101.7.12.1.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86400  

sleNDInspectBaseNotifications 1.3.6.1.4.1.6296.101.7.12.1.3
OBJECT IDENTIFIER    

sleNDInspectLogBufferSizeChanged 1.3.6.1.4.1.6296.101.7.12.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDInspectLogRateChanged 1.3.6.1.4.1.6296.101.7.12.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDACL 1.3.6.1.4.1.6296.101.7.12.2
OBJECT IDENTIFIER    

sleNDAclTable 1.3.6.1.4.1.6296.101.7.12.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleNDAclEntry

sleNDAclEntry 1.3.6.1.4.1.6296.101.7.12.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleNDAclEntry  

sleNDAclIndex 1.3.6.1.4.1.6296.101.7.12.2.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleNDAclName 1.3.6.1.4.1.6296.101.7.12.2.1.1.2
The name of ND ACL.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleNDAclNumEntries 1.3.6.1.4.1.6296.101.7.12.2.1.1.3
Number of Entries
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleNDAclControl 1.3.6.1.4.1.6296.101.7.12.2.2
OBJECT IDENTIFIER    

sleNDAclControlRequest 1.3.6.1.4.1.6296.101.7.12.2.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createNDAcl(1), destroyNDAcl(2)  

sleNDAclControlStatus 1.3.6.1.4.1.6296.101.7.12.2.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleNDAclControlTimer 1.3.6.1.4.1.6296.101.7.12.2.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleNDAclControlTimeStamp 1.3.6.1.4.1.6296.101.7.12.2.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleNDAclControlReqResult 1.3.6.1.4.1.6296.101.7.12.2.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleNDAclControlIndex 1.3.6.1.4.1.6296.101.7.12.2.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleNDAclControlName 1.3.6.1.4.1.6296.101.7.12.2.2.7
The name of acl.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleNDAclNotifications 1.3.6.1.4.1.6296.101.7.12.2.3
OBJECT IDENTIFIER    

sleNDAclCreated 1.3.6.1.4.1.6296.101.7.12.2.3.1
sleNDInspectValidateControl
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDAclDestroyed 1.3.6.1.4.1.6296.101.7.12.2.3.2
sleNDInspectValidateControl
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDACLRule 1.3.6.1.4.1.6296.101.7.12.3
OBJECT IDENTIFIER    

sleNDAclRuleTable 1.3.6.1.4.1.6296.101.7.12.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleNDAclRuleEntry

sleNDAclRuleEntry 1.3.6.1.4.1.6296.101.7.12.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleNDAclRuleEntry  

sleNDAclRuleAclIndex 1.3.6.1.4.1.6296.101.7.12.3.1.1.1
ACL Index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

sleNDAclRuleIndex 1.3.6.1.4.1.6296.101.7.12.3.1.1.2
ACL entry Index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

sleNDAclRuleAction 1.3.6.1.4.1.6296.101.7.12.3.1.1.3
The permit/deny control used per entry
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

sleNDAclRuleType 1.3.6.1.4.1.6296.101.7.12.3.1.1.4
Specify entry type is ipv6 address or ipv6 range or dhcpv6 snooping inspection. dhcpv6 snooping is valid in case of support the dhcpv6 snooping inspection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER subnet(1), range(2), dhcpv6Snooping(3)  

sleNDAclRuleRangeStartIPv6 1.3.6.1.4.1.6296.101.7.12.3.1.1.5
Valid if sleNDAclRuleType is 1 (range) , Otherwise this value is invalid.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleNDAclRuleRangeEndIPv6 1.3.6.1.4.1.6296.101.7.12.3.1.1.6
Valid if sleNDAclRuleType is 1 (range), Otherwise this value is invalid.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleNDAclRuleIPv6Address 1.3.6.1.4.1.6296.101.7.12.3.1.1.7
IPV6Address. Valid if sleNDAclRuleType is 0(subnet).
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleNDAclRuleIPv6Mask 1.3.6.1.4.1.6296.101.7.12.3.1.1.8
SubnetMask. Valid if sleNDAclRuleType is 0(subnet).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..128  

sleNDAclRuleMacAddr 1.3.6.1.4.1.6296.101.7.12.3.1.1.9
Mac Address. If sleNDAclRuleMacType is 0(any) ,this value is invalid.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sleNDAclRuleMacType 1.3.6.1.4.1.6296.101.7.12.3.1.1.10
Mac Address Type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER any(0), host(1), pattern(2)  

sleNDAclRuleControl 1.3.6.1.4.1.6296.101.7.12.3.2
OBJECT IDENTIFIER    

sleNDAclRuleControlRequest 1.3.6.1.4.1.6296.101.7.12.3.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createNDAclRule(1), destroyNDAclRule(2)  

sleNDAclRuleControlStatus 1.3.6.1.4.1.6296.101.7.12.3.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleNDAclRuleControlTimer 1.3.6.1.4.1.6296.101.7.12.3.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleNDAclRuleControlTimeStamp 1.3.6.1.4.1.6296.101.7.12.3.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleNDAclRuleControlReqResult 1.3.6.1.4.1.6296.101.7.12.3.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleNDAclRuleControlAclIndex 1.3.6.1.4.1.6296.101.7.12.3.2.6
The name of acl.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleNDAclRuleControlIndex 1.3.6.1.4.1.6296.101.7.12.3.2.7
The entry index within ACL
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleNDAclRuleControlAction 1.3.6.1.4.1.6296.101.7.12.3.2.8
The permit/deny control used per entry
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

sleNDAclRuleControlType 1.3.6.1.4.1.6296.101.7.12.3.2.9
If type of entry is 1, sleNDAclEntryControlMacType must be 0. dhcpv6Snooping is valid in case of support the dhcpv6 snooping inspection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER subnet(1), range(2), dhcpSnooping(3)  

sleNDAclRuleControlRangeStartIPv6 1.3.6.1.4.1.6296.101.7.12.3.2.10
Description
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

sleNDAclRuleControlRangeEndIPv6 1.3.6.1.4.1.6296.101.7.12.3.2.11
Description
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

sleNDAclRuleControlIPv6Address 1.3.6.1.4.1.6296.101.7.12.3.2.12
Description
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressIPv6  

sleNDAclRuleControlIPv6Mask 1.3.6.1.4.1.6296.101.7.12.3.2.13
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

sleNDAclRuleControlMacAddr 1.3.6.1.4.1.6296.101.7.12.3.2.14
Mac Address. If sleNDAclRuleControlMacType is 0(any) ,this value is invalid.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sleNDAclRuleControlMacType 1.3.6.1.4.1.6296.101.7.12.3.2.15
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER any(0), host(1), pattern(2)  

sleNDAclRuleNotifications 1.3.6.1.4.1.6296.101.7.12.3.3
OBJECT IDENTIFIER    

sleNDAclRuleCreated 1.3.6.1.4.1.6296.101.7.12.3.3.1
createNDAclRule
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDAclRuleDestroyed 1.3.6.1.4.1.6296.101.7.12.3.3.2
destroyNDAclRule
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDInspectVlan 1.3.6.1.4.1.6296.101.7.12.4
OBJECT IDENTIFIER    

sleNDInspectVlanTable 1.3.6.1.4.1.6296.101.7.12.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleNDInspectVlanEntry

sleNDInspectVlanEntry 1.3.6.1.4.1.6296.101.7.12.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleNDInspectVlanEntry  

sleNDInspectVlanIndex 1.3.6.1.4.1.6296.101.7.12.4.1.1.1
The index of vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

sleNDInspectVlanEnable 1.3.6.1.4.1.6296.101.7.12.4.1.1.2
The enable/disable control used per vlan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNDInspectVlanFilterAclIndex 1.3.6.1.4.1.6296.101.7.12.4.1.1.3
The ND acl index to be applied to vlan
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleNDInspectVlanFwdPktCnt 1.3.6.1.4.1.6296.101.7.12.4.1.1.4
Forwarded ND packet count.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleNDInspectVlanDropPktCnt 1.3.6.1.4.1.6296.101.7.12.4.1.1.5
Droped ND packet count.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleNDInspectVlanAclPermits 1.3.6.1.4.1.6296.101.7.12.4.1.1.6
Permited ND packet count by acl.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleNDInspectVlanAclDrops 1.3.6.1.4.1.6296.101.7.12.4.1.1.7
Droped ND packet count by acl.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleNDInspectVlanDhcpv6Permits 1.3.6.1.4.1.6296.101.7.12.4.1.1.8
Permited ND packet count by DHCPv6 SNOOPING.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sleNDInspectVlanDhcpv6Denys 1.3.6.1.4.1.6296.101.7.12.4.1.1.9
Denyed ND packet count by DHCPv6 SNOOPING.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sleNDInspectVlanLocalIpv6Denys 1.3.6.1.4.1.6296.101.7.12.4.1.1.10
Denyed ND packet count by Local ipv6 address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sleNDInspectVlanFilterAclName 1.3.6.1.4.1.6296.101.7.12.4.1.1.11
The name of acl to be applied to vlan.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleNDInspectVlanControl 1.3.6.1.4.1.6296.101.7.12.4.2
OBJECT IDENTIFIER    

sleNDInspectVlanControlRequest 1.3.6.1.4.1.6296.101.7.12.4.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setNDInspectVlanProfile(1), clearNDInspectVlanStatistics(2)  

sleNDInspectVlanControlStatus 1.3.6.1.4.1.6296.101.7.12.4.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleNDInspectVlanControlTimer 1.3.6.1.4.1.6296.101.7.12.4.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleNDInspectVlanControlTimeStamp 1.3.6.1.4.1.6296.101.7.12.4.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleNDInspectVlanControlReqResult 1.3.6.1.4.1.6296.101.7.12.4.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleNDInspectVlanControlIndex 1.3.6.1.4.1.6296.101.7.12.4.2.6
The index of vlan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

sleNDInspectVlanControlEnable 1.3.6.1.4.1.6296.101.7.12.4.2.7
The enable/disable control used per vlan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleNDInspectVlanControlFilterAclIndex 1.3.6.1.4.1.6296.101.7.12.4.2.8
The ND Access-list index to be applied to vlan
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleNDInspectVlanNotifications 1.3.6.1.4.1.6296.101.7.12.4.3
OBJECT IDENTIFIER    

sleNDInspectVlanChanged 1.3.6.1.4.1.6296.101.7.12.4.3.1
setNDInspectVlanProfile
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDInspectVlanStatsCleared 1.3.6.1.4.1.6296.101.7.12.4.3.2
clearNDInspectVlanStatistics
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDInspectPort 1.3.6.1.4.1.6296.101.7.12.5
OBJECT IDENTIFIER    

sleNDInspectPortTable 1.3.6.1.4.1.6296.101.7.12.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleNDInspectPortEntry

sleNDInspectPortEntry 1.3.6.1.4.1.6296.101.7.12.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleNDInspectPortEntry  

sleNDInspectPortIndex 1.3.6.1.4.1.6296.101.7.12.5.1.1.1
The index of port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

sleNDInspectPortTrust 1.3.6.1.4.1.6296.101.7.12.5.1.1.2
The trust/untrust control used per port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER untrust(0), trust(1)  

sleNDInspectPortControl 1.3.6.1.4.1.6296.101.7.12.5.2
OBJECT IDENTIFIER    

sleNDInspectPortControlRequest 1.3.6.1.4.1.6296.101.7.12.5.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setNDInspectTrustPort(1)  

sleNDInspectPortControlStatus 1.3.6.1.4.1.6296.101.7.12.5.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleNDInspectPortControlTimer 1.3.6.1.4.1.6296.101.7.12.5.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleNDInspectPortControlTimeStamp 1.3.6.1.4.1.6296.101.7.12.5.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleNDInspectPortControlReqResult 1.3.6.1.4.1.6296.101.7.12.5.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleNDInspectPortControlIndex 1.3.6.1.4.1.6296.101.7.12.5.2.6
The index of port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

sleNDInspectPortControlTrust 1.3.6.1.4.1.6296.101.7.12.5.2.7
The enable/disable control used per port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER untrust(0), trust(1)  

sleNDInspectPortNotifications 1.3.6.1.4.1.6296.101.7.12.5.3
OBJECT IDENTIFIER    

sleNDInspectPortChanged 1.3.6.1.4.1.6296.101.7.12.5.3.1
setNDInspectTrustPort
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNDInspectInvalidLog 1.3.6.1.4.1.6296.101.7.12.6
OBJECT IDENTIFIER    

sleNDInspectInvalidLogTable 1.3.6.1.4.1.6296.101.7.12.6.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleNDInspectInvalidLogEntry

sleNDInspectInvalidLogEntry 1.3.6.1.4.1.6296.101.7.12.6.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleNDInspectInvalidLogEntry  

sleNDInspectInvalidLogId 1.3.6.1.4.1.6296.101.7.12.6.1.1.1
ND inspection invalid index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

sleNDInspectInvalidLogReason 1.3.6.1.4.1.6296.101.7.12.6.1.1.2
ND inspection invalid reason.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER aliReasonNone(0), aliiReasonDhcpv6Permit(1), aliReasonDhcpv6Deny(2), aliReasonAclPermit(3), aliReasonAclDeny(4), aliReasonLocalIpv6Deny(5), aliReasonRAguardPermit(6), aliReasonRAguardDeny(7)  

sleNDInspectInvalidLogSamePktCnt 1.3.6.1.4.1.6296.101.7.12.6.1.1.3
ND inspection invalid same packet counters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleNDInspectInvalidLogPortNumber 1.3.6.1.4.1.6296.101.7.12.6.1.1.4
ND inspection invalid port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sleNDInspectInvalidLogVlanId 1.3.6.1.4.1.6296.101.7.12.6.1.1.5
ND inspection invalid vlan id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sleNDInspectInvalidLogSenderMacAddr 1.3.6.1.4.1.6296.101.7.12.6.1.1.6
ND inspection invalid sender mac address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

sleNDInspectInvalidLogSrcMacAddr 1.3.6.1.4.1.6296.101.7.12.6.1.1.7
ND inspection invalid source mac address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

sleNDInspectInvalidLogSenderIpv6Addr 1.3.6.1.4.1.6296.101.7.12.6.1.1.8
ND inspection invalid sender IPv6 address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleNDInspectInvalidLogDstIpv6Addr 1.3.6.1.4.1.6296.101.7.12.6.1.1.9
ND inspection invalid destination IPv6 address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

sleNDInspectInvalidLogLastRecvTime 1.3.6.1.4.1.6296.101.7.12.6.1.1.10
ND inspection invalid packet last received time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleNDInspectInvalidLogNDType 1.3.6.1.4.1.6296.101.7.12.6.1.1.11
The Type of droped ND packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ndiscRouterSolicitation(1), ndiscRouteradvertisemetn(2), ndiscNeighbourSolicitation(3), ndiscNeighbourAdvertisement(4)  

sleRAGuard 1.3.6.1.4.1.6296.101.7.13
OBJECT IDENTIFIER    

sleRAGuardPolicy 1.3.6.1.4.1.6296.101.7.13.1
OBJECT IDENTIFIER    

sleRAGuardPolicyTable 1.3.6.1.4.1.6296.101.7.13.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleRAGuardPolicyEntry

sleRAGuardPolicyEntry 1.3.6.1.4.1.6296.101.7.13.1.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleRAGuardPolicyEntry  

sleRAGuardPolicyIndex 1.3.6.1.4.1.6296.101.7.13.1.1.1.1
The Index of RAGuard Policy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleRAGuardPolicyName 1.3.6.1.4.1.6296.101.7.13.1.1.1.2
The name of RAGuard Policy.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleRAGuardPolicyHoplimitMin 1.3.6.1.4.1.6296.101.7.13.1.1.1.3
The minimize value of hop-limit
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

sleRAGuardPolicyHoplimitMax 1.3.6.1.4.1.6296.101.7.13.1.1.1.4
The maximize value of hop-limit
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

sleRAGuardPolicyManagedFlag 1.3.6.1.4.1.6296.101.7.13.1.1.1.5
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleRAGuardPolicyOtherFlag 1.3.6.1.4.1.6296.101.7.13.1.1.1.6
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleRAGuardPolicyRouterPreference 1.3.6.1.4.1.6296.101.7.13.1.1.1.7
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER medium(0), high(1), low(3)  

sleRAGuardPolicyMatchACLName 1.3.6.1.4.1.6296.101.7.13.1.1.1.8
Name of matched IPv6 ACL
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleRAGuardPolicyMatchPrefixName 1.3.6.1.4.1.6296.101.7.13.1.1.1.9
Name of matched Prefix-List
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleRAGuardPolicyControl 1.3.6.1.4.1.6296.101.7.13.1.2
OBJECT IDENTIFIER    

sleRAGuardPolicyControlRequest 1.3.6.1.4.1.6296.101.7.13.1.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createRAGuardPolicy(1), destroyRAGuardPolicy(2), changeRAGuardPolicy(3)  

sleRAGuardPolicyControlStatus 1.3.6.1.4.1.6296.101.7.13.1.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleRAGuardPolicyControlTimer 1.3.6.1.4.1.6296.101.7.13.1.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleRAGuardPolicyControlTimeStamp 1.3.6.1.4.1.6296.101.7.13.1.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleRAGuardPolicyControlReqResult 1.3.6.1.4.1.6296.101.7.13.1.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleRAGuardPolicyControlIndex 1.3.6.1.4.1.6296.101.7.13.1.2.6
The Index of RAGuard Policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleRAGuardPolicyControlName 1.3.6.1.4.1.6296.101.7.13.1.2.7
The name of RA Guard Policy.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleRAGuardPolicyControlHoplimitMin 1.3.6.1.4.1.6296.101.7.13.1.2.8
The minimize value of hop-limit
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sleRAGuardPolicyControlHoplimitMax 1.3.6.1.4.1.6296.101.7.13.1.2.9
The maxmize value of hop-limit
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sleRAGuardPolicyControlManagedFlag 1.3.6.1.4.1.6296.101.7.13.1.2.10
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleRAGuardPolicyControlOtherFlag 1.3.6.1.4.1.6296.101.7.13.1.2.11
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleRAGuardPolicyControlRouterPreference 1.3.6.1.4.1.6296.101.7.13.1.2.12
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER medium(0), high(1), low(3)  

sleRAGuardPolicyControlMatchACLName 1.3.6.1.4.1.6296.101.7.13.1.2.13
Name of matched IPv6 ACL
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleRAGuardPolicyControlMatchPrefixName 1.3.6.1.4.1.6296.101.7.13.1.2.14
Name of matched Prefix-List
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleRAGuardPolicyNotifications 1.3.6.1.4.1.6296.101.7.13.1.3
OBJECT IDENTIFIER    
<