SLE-SYSTEMMAINTENANCE-MIB

File: SLE-SYSTEMMAINTENANCE-MIB.mib (226255 bytes)

Imported modules

DASAN-SMI INET-ADDRESS-MIB SLE-TC-MIB
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC

Imported symbols

sleMgmt InetAddressType InetAddress
SleControlStatusType SleControlRequestResultType OBJECT-GROUP
NOTIFICATION-GROUP TimeTicks IpAddress
Integer32 Unsigned32 Gauge32
Counter64 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE MacAddress

Defined Types

EnableFlag  
INTEGER enable(1), disable(2)    

SleDefAutoCliScheduleType  
INTEGER periodic(1), at(2), daily(3), immediate(4)    

SleDefAutoCliScheduleTransferType  
INTEGER ftp(1), tftp(2), memory(3), none(4)    

SleDefAutoCliScheduleResult  
INTEGER success(1), fail(2)    

SleSystemBaseSlotInfoEntry  
SEQUENCE    
  sleSystemSlotIndex Integer32
  sleSystemSlotUptime TimeTicks
  sleSystemSlotModelName OCTET STRING
  sleSystemSlotSerialNumber OCTET STRING
  sleSystemSlotHWVersion OCTET STRING
  sleSystemSlotBLVersion OCTET STRING
  sleSystemSlotSWCompatibility OCTET STRING
  sleSystemSlotOSVersion OCTET STRING
  sleSystemSlotMacAddress OCTET STRING
  sleSystemSlotCPULoadAll OCTET STRING
  sleSystemSlotCPULoadInterrupt OCTET STRING
  sleSystemSlotMemoryTotal Unsigned32
  sleSystemSlotMemoryFree Unsigned32
  sleSystemSlotMemoryShared Unsigned32
  sleSystemSlotMemoryBuffers Unsigned32
  sleSystemSlotMemoryCached Unsigned32
  sleSystemSlotMemorySwapTotal Unsigned32
  sleSystemSlotMemorySwapFree Unsigned32
  sleSystemSlotBootReason INTEGER
  sleSystemSlotBootTime Unsigned32
  sleSystemSlotVoltage Unsigned32

SleDNSServerEntry  
SEQUENCE    
  sleDNSServerIndex Integer32
  sleDNSServerName IpAddress
  sleDnsServerAddrType InetAddressType
  sleDnsServerAddress InetAddress

SleLoginEntry  
SEQUENCE    
  sleLoginIndex Integer32
  sleLoginUser OCTET STRING
  sleLoginTTY OCTET STRING
  sleLoginRemote OCTET STRING
  sleLoginTime OCTET STRING

SleBackupEntry  
SEQUENCE    
  sleBackupConfigFile OCTET STRING

SleProcessEntry  
SEQUENCE    
  sleProcessID Integer32
  sleProcessUser OCTET STRING
  sleProcessCPU Integer32
  sleProcessMemory Integer32
  sleProcessVSZ Integer32
  sleProcessRSS Integer32
  sleProcessTerminal OCTET STRING
  sleProcessStatus OCTET STRING
  sleProcessStartTime OCTET STRING
  sleProcessUsedTime OCTET STRING
  sleProcessCommand OCTET STRING

SleNTPServerEntry  
SEQUENCE    
  sleNTPServerName OCTET STRING
  sleNtpServerAuthenticationKey Integer32
  sleNtpServerVRFIndex Integer32
  sleNtpServerPrefer INTEGER
  sleNtpServerVersion INTEGER

SleSyslogConfEntry  
SEQUENCE    
  sleSyslogConfIndex Integer32
  sleSyslogConfMode INTEGER
  sleSyslogConfFacility INTEGER
  sleSyslogConfSeverity INTEGER
  sleSyslogConfTarget INTEGER
  sleSyslogConfStorage INTEGER
  sleSyslogConfTargetAddress IpAddress
  sleSyslogConfRemoteAddrType InetAddressType
  sleSyslogConfRemoteAddress InetAddress
  sleSyslogConfVRFIndex Integer32
  sleSyslogConfSlotIndex Integer32

SleSyslogHistVolEntry  
SEQUENCE    
  sleSyslogHistVolIndex Integer32
  sleSyslogHistVolMsgText OCTET STRING
  sleSyslogHistVolTime TimeTicks

SleSyslogHistNVolEntry  
SEQUENCE    
  sleSyslogHistNVolIndex Integer32
  sleSyslogHistNVolMsgText OCTET STRING
  sleSyslogHistNVolTime TimeTicks

SleSSHRemoteEntry  
SEQUENCE    
  sleSSHRemoteIndex INTEGER
  sleSSHRemoteUser OCTET STRING
  sleSSHRemoteHost IpAddress
  sleSSHRemoteTime OCTET STRING
  sleSSHRemoteFromHost OCTET STRING

SleAutoCliScriptFileEntry  
SEQUENCE    
  sleAutoCliScriptId INTEGER
  sleAutoCliScriptFileName OCTET STRING
  sleAutoCliScriptFileUser OCTET STRING
  sleAutoCliScriptFileSize Integer32
  sleAutoCliScriptFileUpdateTime OCTET STRING

SleAutoCliScheduleEntry  
SEQUENCE    
  sleAutoCliScheduleName OCTET STRING
  sleAutoCliScheduleType SleDefAutoCliScheduleType
  sleAutoCliScheduleInterval Integer32
  sleAutoCliScheduleYear Integer32
  sleAutoCliScheduleMonth Integer32
  sleAutoCliScheduleDay Integer32
  sleAutoCliScheduleHour Integer32
  sleAutoCliScheduleMinute Integer32
  sleAutoCliScheduleScriptName OCTET STRING
  sleAutoCliScheduleTransferType SleDefAutoCliScheduleTransferType
  sleAutoCliScheduleLastExecutedTime OCTET STRING
  sleAutoCliScheduleOutputRule OCTET STRING
  sleAutoCliScheduleLastResult SleDefAutoCliScheduleResult
  sleAutoCliScheduleProfileName OCTET STRING

SleAutoCliProfileEntry  
SEQUENCE    
  sleAutoCliProfileName OCTET STRING
  sleAutoCliProfileType INTEGER

SleAutoCliProfileServerEntry  
SEQUENCE    
  sleAutoCliProfileServerType INTEGER
  sleAutoCliProfileServerIpAddress IpAddress
  sleAutoCliProfileServerUser OCTET STRING
  sleAutoCliProfileServerPassword OCTET STRING
  sleAutoCliProfileServerDir OCTET STRING

SleAutoCliOutputMemoryFileEntry  
SEQUENCE    
  sleAutoCliOutputMemoryFileId INTEGER
  sleAutoCliOutputMemoryFileName OCTET STRING
  sleAutoCliOutputMemoryFileSize Integer32
  sleAutoCliOutputMemoryFileUpdatedTime OCTET STRING

SleCoreDumpInfoEntry  
SEQUENCE    
  sleCoreDumpInfoPID INTEGER
  sleCoreDumpInfoStatus INTEGER
  sleCoreDumpFile OCTET STRING

SleServiceEntry  
SEQUENCE    
  sleServiceIndex INTEGER
  sleServiceProtocol INTEGER
  sleServiceName OCTET STRING
  sleServicePort INTEGER
  sleServiceAdminStatus INTEGER

SleSystemUserEntry  
SEQUENCE    
  sleSystemUserName OCTET STRING
  sleSystemUserLevel INTEGER
  sleSystemUserPassword OCTET STRING
  sleSystemUserDesc OCTET STRING
  sleSystemUserLoginFailureCount Integer32
  sleSystemUserLoginLastFailureTime OCTET STRING

SleParameterEntry  
SEQUENCE    
  sleParameterName OCTET STRING
  sleParameterValue OCTET STRING
  sleParameterMode INTEGER

SleSwWatchdogEntry  
SEQUENCE    
  sleSwWatchdogType INTEGER
  sleSwWatchdogInterval INTEGER
  sleSwWatchdogThreshold INTEGER
  sleSwWatchdogAction INTEGER
  sleSwWatchdogErrcnt Integer32

SleAutoUpgradeProfileEntry  
SEQUENCE    
  sleAutoUpgradeProfileIndex Integer32
  sleAutoUpgradeProfileName OCTET STRING
  sleAutoUpgradeProfileOldVer OCTET STRING
  sleAutoUpgradeProfileNewVer OCTET STRING
  sleAutoUpgradeProfileSize Integer32
  sleAutoUpgradeProfilePeriodType INTEGER
  sleAutoUpgradeProfileDate OCTET STRING
  sleAutoUpgradeProfilePeriodDate OCTET STRING
  sleAutoUpgradeProfileTimeout Integer32
  sleAutoUpgradeProfileRetry Integer32
  sleAutoUpgradeProfileRegSec Integer32
  sleAutoUpgradeProfileReloadTime OCTET STRING
  sleAutoUpgradeProfileModel OCTET STRING

SleAutoUpgradeOltEntry  
SEQUENCE    
  sleAutoUpgradeOltSlotIndex INTEGER
  sleAutoUpgradeOltFwType INTEGER
  sleAutoUpgradeOltProfileName OCTET STRING
  sleAutoUpgradeOltSlotType INTEGER

SleAutoUpgradeOntEntry  
SEQUENCE    
  sleAutoUpgradeOntOltIndex INTEGER
  sleAutoUpgradeOntIndex INTEGER
  sleAutoUpgradeOntFwType INTEGER
  sleAutoUpgradeOntProfileName OCTET STRING

SleFtpclientEntry  
SEQUENCE    
  sleFtpclientIndex Integer32
  sleFtpclientFileName OCTET STRING
  sleFtpclientFileSize Integer32

Defined Values

sleSystemMaintenance 1.3.6.1.4.1.6296.101.1
Description.
MODULE-IDENTITY    

sleSystemBase 1.3.6.1.4.1.6296.101.1.1
OBJECT IDENTIFIER    

sleSystemBaseInfo 1.3.6.1.4.1.6296.101.1.1.1
OBJECT IDENTIFIER    

sleSystemModelName 1.3.6.1.4.1.6296.101.1.1.1.1
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSerialNumber 1.3.6.1.4.1.6296.101.1.1.1.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemHWVersion 1.3.6.1.4.1.6296.101.1.1.1.3
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemBLVersion 1.3.6.1.4.1.6296.101.1.1.1.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSWCompatibility 1.3.6.1.4.1.6296.101.1.1.1.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemOSVersion 1.3.6.1.4.1.6296.101.1.1.1.6
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemMacAddress 1.3.6.1.4.1.6296.101.1.1.1.7
Description
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sleSystemHostName 1.3.6.1.4.1.6296.101.1.1.1.8
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemCPULoadAll 1.3.6.1.4.1.6296.101.1.1.1.9
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemCPULoadInterrupt 1.3.6.1.4.1.6296.101.1.1.1.10
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemCPUThreshold 1.3.6.1.4.1.6296.101.1.1.1.11
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 20..100  

sleSystemCPUInterval 1.3.6.1.4.1.6296.101.1.1.1.12
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 5 | 60 | 600  

sleSystemMemoryTotal 1.3.6.1.4.1.6296.101.1.1.1.13
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemMemoryFree 1.3.6.1.4.1.6296.101.1.1.1.14
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemMemoryShared 1.3.6.1.4.1.6296.101.1.1.1.15
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemMemoryBuffers 1.3.6.1.4.1.6296.101.1.1.1.16
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemMemoryCached 1.3.6.1.4.1.6296.101.1.1.1.17
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemMemorySwapTotal 1.3.6.1.4.1.6296.101.1.1.1.18
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemMemorySwapFree 1.3.6.1.4.1.6296.101.1.1.1.19
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemDefaultOS 1.3.6.1.4.1.6296.101.1.1.1.20
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noDualOS(0), os1(1), os2(2)  

sleSystemOS1Version 1.3.6.1.4.1.6296.101.1.1.1.21
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemOS1Size 1.3.6.1.4.1.6296.101.1.1.1.22
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemOS1BuildNumber 1.3.6.1.4.1.6296.101.1.1.1.23
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemOS2Version 1.3.6.1.4.1.6296.101.1.1.1.24
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemOS2Size 1.3.6.1.4.1.6296.101.1.1.1.25
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemOS2BuildNumber 1.3.6.1.4.1.6296.101.1.1.1.26
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemFlashTotalSize 1.3.6.1.4.1.6296.101.1.1.1.27
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemFlashOSSize 1.3.6.1.4.1.6296.101.1.1.1.28
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemFlashConfigSize 1.3.6.1.4.1.6296.101.1.1.1.29
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemFlashOSUsedSize 1.3.6.1.4.1.6296.101.1.1.1.30
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemFlashConfigUsedSize 1.3.6.1.4.1.6296.101.1.1.1.31
Description
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemClock 1.3.6.1.4.1.6296.101.1.1.1.32
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemTimezone 1.3.6.1.4.1.6296.101.1.1.1.33
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemDNSDomainName 1.3.6.1.4.1.6296.101.1.1.1.34
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemInitBanner 1.3.6.1.4.1.6296.101.1.1.1.35
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSuccessBanner 1.3.6.1.4.1.6296.101.1.1.1.36
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemFailBanner 1.3.6.1.4.1.6296.101.1.1.1.37
Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSyslogState 1.3.6.1.4.1.6296.101.1.1.1.38
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(-2), stop(0), start(1)  

sleSystemSyslogVolatileNumber 1.3.6.1.4.1.6296.101.1.1.1.39
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSystemSyslogNonVolatileNumber 1.3.6.1.4.1.6296.101.1.1.1.40
Description
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSystemSyslogBindAddress 1.3.6.1.4.1.6296.101.1.1.1.41
Description
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSystemSyslogLocalCode 1.3.6.1.4.1.6296.101.1.1.1.42
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1 | 0..7  

sleSystemSSHState 1.3.6.1.4.1.6296.101.1.1.1.43
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSystemNTPState 1.3.6.1.4.1.6296.101.1.1.1.44
Description
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), ntp(1), sntp(2)  

sleSystemBackupInterval 1.3.6.1.4.1.6296.101.1.1.1.45
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSystemDhcpActivity 1.3.6.1.4.1.6296.101.1.1.1.46
The activity of DHCP daemon.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSystemDefaultTTL 1.3.6.1.4.1.6296.101.1.1.1.47
The default ttl.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 32..255  

sleSystemSyslogVolatileSize 1.3.6.1.4.1.6296.101.1.1.1.48
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSystemSyslogBindInterfaceName 1.3.6.1.4.1.6296.101.1.1.1.49
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSessionTime 1.3.6.1.4.1.6296.101.1.1.1.50
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 60..3600  

sleSystemExecTimeout 1.3.6.1.4.1.6296.101.1.1.1.51
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147519  

sleSystemWatchdogStatus 1.3.6.1.4.1.6296.101.1.1.1.52
The status of system watchdog
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleSystemNtpBindInterface 1.3.6.1.4.1.6296.101.1.1.1.53
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemFtpBindInterface 1.3.6.1.4.1.6296.101.1.1.1.54
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemRedundancyPort 1.3.6.1.4.1.6296.101.1.1.1.55
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

sleSystemSyslogVolatileMaxLine 1.3.6.1.4.1.6296.101.1.1.1.56
The max lines of volatile. Exclusive to sleSystemSyslogVolatileSize. (Supported only model 5924N)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 8..16384  

sleSystemBootInfo 1.3.6.1.4.1.6296.101.1.1.1.57
The information of last boot.. (Supported only model 5924N)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemTempHighThreshold 1.3.6.1.4.1.6296.101.1.1.1.58
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSystemTempLowThreshold 1.3.6.1.4.1.6296.101.1.1.1.59
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSystemMemThreshold 1.3.6.1.4.1.6296.101.1.1.1.60
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 20..100  

sleSystemLowCPUThreshold 1.3.6.1.4.1.6296.101.1.1.1.61
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 20..100  

sleSystemLowCPUInterval 1.3.6.1.4.1.6296.101.1.1.1.62
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 5 | 60 | 600  

sleSystemRunningOS 1.3.6.1.4.1.6296.101.1.1.1.63
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noDualOS(0), os1(1), os2(2)  

sleSystemNtpBindAddress 1.3.6.1.4.1.6296.101.1.1.1.64
The NTP client binding address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSystemEnablePasswdType 1.3.6.1.4.1.6296.101.1.1.1.65
The type of enable password of command shell. plain : no encryption. encrypt : encryption
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER plain(1), encrypt(2)  

sleSystemEnablePasswd 1.3.6.1.4.1.6296.101.1.1.1.66
The enable password of command shell.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

sleSystemServicePasswdEncryption 1.3.6.1.4.1.6296.101.1.1.1.67
The encrypt system passwords
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleSystemUptime64 1.3.6.1.4.1.6296.101.1.1.1.68
The time counter from system up. It is large version of sysUpTime.
Status: current Access: read-write
OBJECT-TYPE    
  Counter64  

sleSystemNtpPollnterval 1.3.6.1.4.1.6296.101.1.1.1.69
The NTP request polling-interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 6..20  

sleSystemCPUDuration 1.3.6.1.4.1.6296.101.1.1.1.70
The threshold sampling duration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 5..300  

sleSystemLowCPUDuration 1.3.6.1.4.1.6296.101.1.1.1.71
The threshold sampling duration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 5..300  

sleSystemBarcode 1.3.6.1.4.1.6296.101.1.1.1.72
The System Barcode. (only for specific vender)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemEnhancedFeature 1.3.6.1.4.1.6296.101.1.1.1.73
System enhanced feature enable/disable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleSystemGetBranchModel 1.3.6.1.4.1.6296.101.1.1.1.74
The distinction of branch model.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(0), nsn(1)  

sleSystemTargetId 1.3.6.1.4.1.6296.101.1.1.1.75
The system target ID.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemNodeName 1.3.6.1.4.1.6296.101.1.1.1.76
The system node name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemNetworkName 1.3.6.1.4.1.6296.101.1.1.1.77
The system network name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemShelfId 1.3.6.1.4.1.6296.101.1.1.1.78
The system shelf ID.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotId 1.3.6.1.4.1.6296.101.1.1.1.79
The system slot ID.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemWebMgmt 1.3.6.1.4.1.6296.101.1.1.1.80
The web-management service status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleSystemManufacturer 1.3.6.1.4.1.6296.101.1.1.1.81
The manufacturer
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemManufactureDate 1.3.6.1.4.1.6296.101.1.1.1.82
The manufacture date
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemNosUpgradeStatus 1.3.6.1.4.1.6296.101.1.1.1.83
The status of NOS download & upload. This represent the progress of NOS upgrade.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), ok(1), fail(2), inprogress(3), unknown(255)  

sleSystemAutoReloadInHour 1.3.6.1.4.1.6296.101.1.1.1.84
Auto-Reload Hour from now (Unit: Hour from Now).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..23  

sleSystemAutoReloadInMinutes 1.3.6.1.4.1.6296.101.1.1.1.85
Auto-Reload Time from now (Unit: Min from Now).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..59  

sleSystemAutoReloadDailyHour 1.3.6.1.4.1.6296.101.1.1.1.86
Auto-Reload Time from now (Unit: Daily from Now).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..23  

sleSystemAutoReloadDailyMinutes 1.3.6.1.4.1.6296.101.1.1.1.87
Auto-Reload minutes from now (Unit: Daily from Now).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..59  

sleSystemAutoReloadAtYear 1.3.6.1.4.1.6296.101.1.1.1.88
AAuto-Reload year from now (Unit: year from Now)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 2008..2035  

sleSystemAutoReloadAtMonth 1.3.6.1.4.1.6296.101.1.1.1.89
Auto-Reload month of every year (Unit: month )
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..12  

sleSystemAutoReloadAtDay 1.3.6.1.4.1.6296.101.1.1.1.90
Auto-Reload day of every month
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

sleSystemAutpReloadAtHour 1.3.6.1.4.1.6296.101.1.1.1.91
Auto-Reload Hour from now (Unit: Hour from Now)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..23  

sleSystemAutpReloadAtMinutes 1.3.6.1.4.1.6296.101.1.1.1.92
Auto-Reload minute from now (Unit: minute from Now)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..59  

sleSystemAdministeredMac 1.3.6.1.4.1.6296.101.1.1.1.93
The system administered MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemBaseMac 1.3.6.1.4.1.6296.101.1.1.1.94
The system base MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSyslogBindAddrType 1.3.6.1.4.1.6296.101.1.1.1.95
Type of IP address. 1: ipv4 2: ipv6
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleSystemSyslogBindIPAddress 1.3.6.1.4.1.6296.101.1.1.1.96
The syslog's bind ip address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleSystemNtpBindAddrType 1.3.6.1.4.1.6296.101.1.1.1.97
Type of IP address. 1: ipv4 2: ipv6
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleSystemNtpBindIPAddress 1.3.6.1.4.1.6296.101.1.1.1.98
The NTP client binding address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleSystemPLDversion 1.3.6.1.4.1.6296.101.1.1.1.99
The product PLD version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSysetmGlobalTimeoutMin 1.3.6.1.4.1.6296.101.1.1.1.100
System global timeout minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSysetmGlobalTimeoutSec 1.3.6.1.4.1.6296.101.1.1.1.101
System global timeout seconds
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSystemCPULoad5s 1.3.6.1.4.1.6296.101.1.1.1.102
The Avg. Value of CPU Load for 5 seconds (skip decimal point)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

sleSystemCPULoad1m 1.3.6.1.4.1.6296.101.1.1.1.103
The Avg. Value of CPU Load for 1 minute (skip decimal point)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

sleSystemCPULoad10m 1.3.6.1.4.1.6296.101.1.1.1.104
The Avg. Value of CPU Load for 10 minute (skip decimal point)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

sleSystemBaseControl 1.3.6.1.4.1.6296.101.1.1.2
OBJECT IDENTIFIER    

sleSystemControlRequest 1.3.6.1.4.1.6296.101.1.1.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setSystemBaseSystemInfoProfile(1), setSystemBaseCPUThresholdProfile(2), sleSystemBaseDefaultOS(3), setSystemBaseRTCProfile(4), setSystemBaseDNSDomainName(5), setSystemBaseBannerProfile(6), setSystemBaseSyslogProfile(7), setSystemBaseSSHState(8), setSystemBaseNTPState(9), setSystemBaseOSUpgradeProfile(10), setSystemBaseBackup(11), setSystemBaseBackupInterval(12), setSystemBaseReload(13), setSystemDhcpActivity(14), setSystemBasePonFwDownloadProfile(15), setSystemDefaultTTL(16), setSystemBaseSyslogBindIfName(17), clearSystemBaseSyslogBindIfName(18), setSystemConfigPortMove(19), setSystemConfigPortCopy(20), setSystemConfigPortClear(21), setSystemControlSessionTime(22), setSystemControlExecTimeout(23), setSystemWatchdogStatus(24), clearSystemOs(25), setNtpBindInterface(26), setFtpBindInterface(27), setSystemBaseRedundancyPort(28), clearRedundancy(29), setSystemBaseTempThreshold(30), setSystemBaseMemThreshold(31), setSystemBaseReloadBoth(32), setSystemBaseBootloaderUpgradeProfile(33), setNtpBindAddress(34), setEnablePasswd(35), setEnableSerivceEncryption(36), restoreSystemPasswd(37), setNtpPollInterval(38), setRestoreFactory(39), setWebMgmtStatus(40), setSystemBaseAutoReloadInTime(41), setSystemBaseAutoReloadDailyTime(42), setSystemBaseAutoReloadAtTime(43), setSystemAdministeredMac(44), setSystemSyslogProfileEx(45), setNtpBindAddressEx(46), setRetryWriteMemory(47), setGlobalTimeout(48)  

sleSystemControlStatus 1.3.6.1.4.1.6296.101.1.1.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSystemControlTimer 1.3.6.1.4.1.6296.101.1.1.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSystemControlTimeStamp 1.3.6.1.4.1.6296.101.1.1.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSystemControlReqResult 1.3.6.1.4.1.6296.101.1.1.2.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSystemControlHostName 1.3.6.1.4.1.6296.101.1.1.2.6
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlCPUThreshold 1.3.6.1.4.1.6296.101.1.1.2.7
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..100  

sleSystemControlCPUInterval 1.3.6.1.4.1.6296.101.1.1.2.8
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5 | 60 | 600  

sleSystemControlDefaultOS 1.3.6.1.4.1.6296.101.1.1.2.9
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER os1(1), os2(2)  

sleSystemControlClock 1.3.6.1.4.1.6296.101.1.1.2.10
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlTimezone 1.3.6.1.4.1.6296.101.1.1.2.11
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlDNSDomainName 1.3.6.1.4.1.6296.101.1.1.2.12
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlInitBanner 1.3.6.1.4.1.6296.101.1.1.2.13
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlSuccessBanner 1.3.6.1.4.1.6296.101.1.1.2.14
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlFailBanner 1.3.6.1.4.1.6296.101.1.1.2.15
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlSyslogState 1.3.6.1.4.1.6296.101.1.1.2.16
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notAvailable(-2), stop(0), start(1)  

sleSystemControlSyslogVolatileNumber 1.3.6.1.4.1.6296.101.1.1.2.17
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notAvailable(-2), clearLocalVolatileHistory(0)  

sleSystemControlSyslogNonVolatileNumber 1.3.6.1.4.1.6296.101.1.1.2.18
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notAvailable(-2), clearLocalNonVolatileHistory(0)  

sleSystemControlSyslogBindAddress 1.3.6.1.4.1.6296.101.1.1.2.19
Description
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSystemControlSyslogLocalCode 1.3.6.1.4.1.6296.101.1.1.2.20
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -1 | 0..7  

sleSystemControlSSHState 1.3.6.1.4.1.6296.101.1.1.2.21
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSystemControlNTPState 1.3.6.1.4.1.6296.101.1.1.2.22
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), ntp(1), sntp(2)  

sleSystemControlOSUpgradeNumber 1.3.6.1.4.1.6296.101.1.1.2.23
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER os1(1), os2(2)  

sleSystemControlServerAddress 1.3.6.1.4.1.6296.101.1.1.2.24
Description
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSystemControlUpDownFlag 1.3.6.1.4.1.6296.101.1.1.2.25
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER upload(0), download(1)  

sleSystemControlUserID 1.3.6.1.4.1.6296.101.1.1.2.26
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlPassword 1.3.6.1.4.1.6296.101.1.1.2.27
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlFileName 1.3.6.1.4.1.6296.101.1.1.2.28
Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlBackupFlag 1.3.6.1.4.1.6296.101.1.1.2.29
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER writeMemory(1), restoreFactoryDefault(2), restoreL2Default(3)  

sleSystemControlReloadOS 1.3.6.1.4.1.6296.101.1.1.2.30
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notAvailable(0), os1(1), os2(2)  

sleSystemControlBackupInterval 1.3.6.1.4.1.6296.101.1.1.2.31
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSystemControlDhcpActivity 1.3.6.1.4.1.6296.101.1.1.2.32
The activity of DHCP daemon.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sleSystemControlDefaultTTL 1.3.6.1.4.1.6296.101.1.1.2.33
The default ttl.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 32..255  

sleSystemControlSyslogVolatileSize 1.3.6.1.4.1.6296.101.1.1.2.34
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2048  

sleSystemControlSyslogBindInterfaceName 1.3.6.1.4.1.6296.101.1.1.2.35
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlSrcPort 1.3.6.1.4.1.6296.101.1.1.2.36
The source bridge port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

sleSystemControlDstPort 1.3.6.1.4.1.6296.101.1.1.2.37
The destination bridge port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

sleSystemControlSessionTime 1.3.6.1.4.1.6296.101.1.1.2.38
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 60..600  

sleSystemControlExecTimeout 1.3.6.1.4.1.6296.101.1.1.2.39
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147519  

sleSystemControlWatchdogStatus 1.3.6.1.4.1.6296.101.1.1.2.40
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleSystemControlClearOs 1.3.6.1.4.1.6296.101.1.1.2.41
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSystemControlNtpBindInterface 1.3.6.1.4.1.6296.101.1.1.2.42
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlFtpBindInterface 1.3.6.1.4.1.6296.101.1.1.2.43
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlSyslogVolMaxLine 1.3.6.1.4.1.6296.101.1.1.2.44
Syslog volatile max line. (Supported only model 5924N)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 8..16384  

sleSystemControlTempHighThreshold 1.3.6.1.4.1.6296.101.1.1.2.45
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSystemControlTempLowThreshold 1.3.6.1.4.1.6296.101.1.1.2.46
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSystemControlMemThreshold 1.3.6.1.4.1.6296.101.1.1.2.47
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..100  

sleSystemControlLowCPUThreshold 1.3.6.1.4.1.6296.101.1.1.2.48
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..100  

sleSystemControlLowCPUInterval 1.3.6.1.4.1.6296.101.1.1.2.49
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5 | 60 | 600  

sleSystemControlNtpBindAddress 1.3.6.1.4.1.6296.101.1.1.2.50
The NTP client binding address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSystemControlEnablePasswdType 1.3.6.1.4.1.6296.101.1.1.2.51
The type of enable password of command shell. plain : no encryption. encrypt : encryption
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER plain(1), encrypt(2)  

sleSystemControlEnablePasswd 1.3.6.1.4.1.6296.101.1.1.2.52
The enable password of command shell.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

sleSystemControlServicePasswdEncryption 1.3.6.1.4.1.6296.101.1.1.2.53
The encrypt system passwords
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleSystemControlNtpPollInterval 1.3.6.1.4.1.6296.101.1.1.2.54
The NTP request polling-interval
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 6..20  

sleSystemControlCPUDuration 1.3.6.1.4.1.6296.101.1.1.2.55
The threshold sampling duration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..300  

sleSystemControlLowCPUDuration 1.3.6.1.4.1.6296.101.1.1.2.56
The threshold sampling duration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..300  

sleSystemControlWebMgmt 1.3.6.1.4.1.6296.101.1.1.2.57
The web-management service status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleSystemControlAutoReloadYear 1.3.6.1.4.1.6296.101.1.1.2.58
System Auto-Reload Year. 0: clear auto-reload time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 2008..2035  

sleSystemControlAutoReloadMonth 1.3.6.1.4.1.6296.101.1.1.2.59
System Auto-Reload Month. 0: clear auto-reload time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..12  

sleSystemControlAutoReloadDay 1.3.6.1.4.1.6296.101.1.1.2.60
System Auto-Reload Day 0: clear auto-reload time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..31  

sleSystemControlAutoReloadHour 1.3.6.1.4.1.6296.101.1.1.2.61
System Auto-Reload Hour. 0: clear auto-reload time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..23  

sleSystemControlAutoReloadMinutes 1.3.6.1.4.1.6296.101.1.1.2.62
System Auto-Reload Minutes 0: clear auto-reload time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..59  

sleSystemControlAdministeredMac 1.3.6.1.4.1.6296.101.1.1.2.63
The system administered MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleSystemControlSyslogBindAddrType 1.3.6.1.4.1.6296.101.1.1.2.64
Type of IP address. 1: ipv4 2: ipv6
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleSystemControlSyslogBindIPAddress 1.3.6.1.4.1.6296.101.1.1.2.65
The syslog's bind ip address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleSystemControlNtpBindAddrType 1.3.6.1.4.1.6296.101.1.1.2.66
Type of IP address. 1: ipv4 2: ipv6
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleSystemControlNtpBindIPAddress 1.3.6.1.4.1.6296.101.1.1.2.67
The NTP client binding address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleSystemControlWriteMemRetryCount 1.3.6.1.4.1.6296.101.1.1.2.68
The write memory retry count.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 3..10  

sleSystemControlWriteMemRetryInterval 1.3.6.1.4.1.6296.101.1.1.2.69
The write memory retry interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 60..180  

sleSystemControlGlobalTimeoutMin 1.3.6.1.4.1.6296.101.1.1.2.70
The system global-timeout minutes
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 60..180  

sleSystemControlGlobalTimeoutSec 1.3.6.1.4.1.6296.101.1.1.2.71
The system global-timeout seconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 60..180  

sleSystemBaseNotification 1.3.6.1.4.1.6296.101.1.1.3
OBJECT IDENTIFIER    

sleSystemSystemInfoProfileChanged 1.3.6.1.4.1.6296.101.1.1.3.1
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemCPUThresholdProfileChanged 1.3.6.1.4.1.6296.101.1.1.3.2
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemDefaultOSChanged 1.3.6.1.4.1.6296.101.1.1.3.3
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemRTCProfileChanged 1.3.6.1.4.1.6296.101.1.1.3.4
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemDNSDomainNameChanged 1.3.6.1.4.1.6296.101.1.1.3.5
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemBannerProfileChanged 1.3.6.1.4.1.6296.101.1.1.3.6
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemSyslogProfileChanged 1.3.6.1.4.1.6296.101.1.1.3.7
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemSSHStateChanged 1.3.6.1.4.1.6296.101.1.1.3.8
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemNTPStateChanged 1.3.6.1.4.1.6296.101.1.1.3.9
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemOSProfileChanged 1.3.6.1.4.1.6296.101.1.1.3.10
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemBackupChanged 1.3.6.1.4.1.6296.101.1.1.3.11
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemBackupIntervalChanged 1.3.6.1.4.1.6296.101.1.1.3.12
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemDhcpActivityChanged 1.3.6.1.4.1.6296.101.1.1.3.13
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemDefaultTTLChanged 1.3.6.1.4.1.6296.101.1.1.3.14
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemSyslogBindInterfaceNameChanged 1.3.6.1.4.1.6296.101.1.1.3.15
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemSyslogBindInterfaceNameCleared 1.3.6.1.4.1.6296.101.1.1.3.16
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemConfigPortMoved 1.3.6.1.4.1.6296.101.1.1.3.17
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemConfigPortCopied 1.3.6.1.4.1.6296.101.1.1.3.18
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemConfigPortCleared 1.3.6.1.4.1.6296.101.1.1.3.19
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemSessionTimeChanged 1.3.6.1.4.1.6296.101.1.1.3.20
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemExecTimeoutChanged 1.3.6.1.4.1.6296.101.1.1.3.21
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemWatchdogStatusChanged 1.3.6.1.4.1.6296.101.1.1.3.22
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemNosDestroyed 1.3.6.1.4.1.6296.101.1.1.3.23
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemNtpBindInterfaceChanged 1.3.6.1.4.1.6296.101.1.1.3.24
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemFtpBindInterfaceChanged 1.3.6.1.4.1.6296.101.1.1.3.25
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemRedundancyPortChanged 1.3.6.1.4.1.6296.101.1.1.3.26
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleRedundancyPortCleared 1.3.6.1.4.1.6296.101.1.1.3.27
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemTempThresholdChanged 1.3.6.1.4.1.6296.101.1.1.3.28
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemMemThresholdChanged 1.3.6.1.4.1.6296.101.1.1.3.29
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemBootloaderProfileChanged 1.3.6.1.4.1.6296.101.1.1.3.30
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemNtpBindAddressChanged 1.3.6.1.4.1.6296.101.1.1.3.31
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemEnablePasswdChanged 1.3.6.1.4.1.6296.101.1.1.3.32
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemEnableServicePasswdEncryptionChanged 1.3.6.1.4.1.6296.101.1.1.3.33
Encrypt system passwords
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemPasswdRestored 1.3.6.1.4.1.6296.101.1.1.3.34
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemNtpPollIntervalChanged 1.3.6.1.4.1.6296.101.1.1.3.35
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemRestoreFactoryChanged 1.3.6.1.4.1.6296.101.1.1.3.36
The command of restory factory.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemWebMgmtChanged 1.3.6.1.4.1.6296.101.1.1.3.37
setWebMgmtStatus
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemAutoReloadInTimeChanged 1.3.6.1.4.1.6296.101.1.1.3.38
set auto reload in time
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemAutoReloadDailyTimeChanged 1.3.6.1.4.1.6296.101.1.1.3.39
set auto reload daily time
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemAutoReloadAtTimeChanged 1.3.6.1.4.1.6296.101.1.1.3.40
set auto reload at time
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemAdministeredMacChanged 1.3.6.1.4.1.6296.101.1.1.3.41
setSystemAdministeredMac
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemSyslogProfileExChanged 1.3.6.1.4.1.6296.101.1.1.3.42
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemNtpBindAddressExChanged 1.3.6.1.4.1.6296.101.1.1.3.43
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemRetryWriteMemoryChanged 1.3.6.1.4.1.6296.101.1.1.3.44
setRetryWriteMemory
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemGlobalTimeoutChanged 1.3.6.1.4.1.6296.101.1.1.3.48
setRetryWriteMemory
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemBaseSlotInfo 1.3.6.1.4.1.6296.101.1.1.4
OBJECT IDENTIFIER    

sleSystemBaseSlotInfoTable 1.3.6.1.4.1.6296.101.1.1.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSystemBaseSlotInfoEntry

sleSystemBaseSlotInfoEntry 1.3.6.1.4.1.6296.101.1.1.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSystemBaseSlotInfoEntry  

sleSystemSlotIndex 1.3.6.1.4.1.6296.101.1.1.4.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..64  

sleSystemSlotUptime 1.3.6.1.4.1.6296.101.1.1.4.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSystemSlotModelName 1.3.6.1.4.1.6296.101.1.1.4.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotSerialNumber 1.3.6.1.4.1.6296.101.1.1.4.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotHWVersion 1.3.6.1.4.1.6296.101.1.1.4.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotBLVersion 1.3.6.1.4.1.6296.101.1.1.4.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotSWCompatibility 1.3.6.1.4.1.6296.101.1.1.4.1.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotOSVersion 1.3.6.1.4.1.6296.101.1.1.4.1.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotMacAddress 1.3.6.1.4.1.6296.101.1.1.4.1.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotCPULoadAll 1.3.6.1.4.1.6296.101.1.1.4.1.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotCPULoadInterrupt 1.3.6.1.4.1.6296.101.1.1.4.1.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemSlotMemoryTotal 1.3.6.1.4.1.6296.101.1.1.4.1.1.12
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemSlotMemoryFree 1.3.6.1.4.1.6296.101.1.1.4.1.1.13
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemSlotMemoryShared 1.3.6.1.4.1.6296.101.1.1.4.1.1.14
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemSlotMemoryBuffers 1.3.6.1.4.1.6296.101.1.1.4.1.1.15
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemSlotMemoryCached 1.3.6.1.4.1.6296.101.1.1.4.1.1.16
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemSlotMemorySwapTotal 1.3.6.1.4.1.6296.101.1.1.4.1.1.17
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemSlotMemorySwapFree 1.3.6.1.4.1.6296.101.1.1.4.1.1.18
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemSlotBootReason 1.3.6.1.4.1.6296.101.1.1.4.1.1.19
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER error(0), powerboot(1), panic(2), swreboot(3), lowmemory(4), watchdog(5), swWatchdog(9), swrebootBySfu(11), autoreset(12)  

sleSystemSlotBootTime 1.3.6.1.4.1.6296.101.1.1.4.1.1.20
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleSystemSlotVoltage 1.3.6.1.4.1.6296.101.1.1.4.1.1.21
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sleDNSServer 1.3.6.1.4.1.6296.101.1.2
OBJECT IDENTIFIER    

sleDNSServerTable 1.3.6.1.4.1.6296.101.1.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleDNSServerEntry

sleDNSServerEntry 1.3.6.1.4.1.6296.101.1.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleDNSServerEntry  

sleDNSServerIndex 1.3.6.1.4.1.6296.101.1.2.1.1.1
DNS server index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleDNSServerName 1.3.6.1.4.1.6296.101.1.2.1.1.2
Registered DNS server name
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleDnsServerAddrType 1.3.6.1.4.1.6296.101.1.2.1.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleDnsServerAddress 1.3.6.1.4.1.6296.101.1.2.1.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleDNSServerControl 1.3.6.1.4.1.6296.101.1.2.2
OBJECT IDENTIFIER    

sleDNSServerControlRequest 1.3.6.1.4.1.6296.101.1.2.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createDNSServer(1), destroyDNSServer(2), createDnsServerEx(3)  

sleDNSServerControlStatus 1.3.6.1.4.1.6296.101.1.2.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleDNSServerControlTimer 1.3.6.1.4.1.6296.101.1.2.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleDNSServerControlTImeStamp 1.3.6.1.4.1.6296.101.1.2.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleDNSServerControlReqResult 1.3.6.1.4.1.6296.101.1.2.2.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleDNSServerControlIndex 1.3.6.1.4.1.6296.101.1.2.2.6
This is corresponded to sleDNSServerIndex.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleDNSServerControlName 1.3.6.1.4.1.6296.101.1.2.2.7
This is corresponded to sleDNSServerName.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleDnsServerControlAddrType 1.3.6.1.4.1.6296.101.1.2.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleDnsServerControlAddress 1.3.6.1.4.1.6296.101.1.2.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleDNSServerNotification 1.3.6.1.4.1.6296.101.1.2.3
OBJECT IDENTIFIER    

sleDNSServerCreated 1.3.6.1.4.1.6296.101.1.2.3.1
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleDNSServerDestroyed 1.3.6.1.4.1.6296.101.1.2.3.2
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleDNSServerExCreated 1.3.6.1.4.1.6296.101.1.2.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleLogin 1.3.6.1.4.1.6296.101.1.3
OBJECT IDENTIFIER    

sleLoginTable 1.3.6.1.4.1.6296.101.1.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleLoginEntry

sleLoginEntry 1.3.6.1.4.1.6296.101.1.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleLoginEntry  

sleLoginIndex 1.3.6.1.4.1.6296.101.1.3.1.1.1
Logined user's index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65536  

sleLoginUser 1.3.6.1.4.1.6296.101.1.3.1.1.2
Logined user name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleLoginTTY 1.3.6.1.4.1.6296.101.1.3.1.1.3
The login user's terminal
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleLoginRemote 1.3.6.1.4.1.6296.101.1.3.1.1.4
Remote host
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleLoginTime 1.3.6.1.4.1.6296.101.1.3.1.1.5
Logined time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleBackup 1.3.6.1.4.1.6296.101.1.4
OBJECT IDENTIFIER    

sleBackupTable 1.3.6.1.4.1.6296.101.1.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleBackupEntry

sleBackupEntry 1.3.6.1.4.1.6296.101.1.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleBackupEntry  

sleBackupConfigFile 1.3.6.1.4.1.6296.101.1.4.1.1.1
Copied configuration file name'running-config' is reserved config name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleBackupControl 1.3.6.1.4.1.6296.101.1.4.2
OBJECT IDENTIFIER    

sleBackupControlRequest 1.3.6.1.4.1.6296.101.1.4.2.1
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createBackup(1), destroyBackup(2), setBackupToRemote(3), setBackupConfigBySftp(4), setBackupConfigByScp(5), setBackupKeyBySftp(6), setBackupKeyByScp(7), createBackupEx(8), setBackupToRemoteEx(9), setBackupConfigBySftpEx(10), setBackupConfigByScpEx(11), setBackupKeyBySftpEx(12), setBackupKeyByScpEx(13)  

sleBackupControlStatus 1.3.6.1.4.1.6296.101.1.4.2.2
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleBackupControlTimer 1.3.6.1.4.1.6296.101.1.4.2.3
Description
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleBackupControlTimeStamp 1.3.6.1.4.1.6296.101.1.4.2.4
Description
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleBackupControlReqResult 1.3.6.1.4.1.6296.101.1.4.2.5
Description
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleBackupControlCreateMode 1.3.6.1.4.1.6296.101.1.4.2.6
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER backupFromRunning(1), backupFromLocal(2), backupFromRemote(3)  

sleBackupControlServerIP 1.3.6.1.4.1.6296.101.1.4.2.7
FTP or TFTP server's address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleBackupControlUserID 1.3.6.1.4.1.6296.101.1.4.2.8
User's ID of the FTP server.If this is empty string, means that the FTP server is the TFTP server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleBackupControlPassword 1.3.6.1.4.1.6296.101.1.4.2.9
User's password of the FTP server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleBackupControlSrcConfigFile 1.3.6.1.4.1.6296.101.1.4.2.10
'running-config' is reserved config name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleBackupControlDstConfigFile 1.3.6.1.4.1.6296.101.1.4.2.11
Descroption.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleBackupControlServerAddrType 1.3.6.1.4.1.6296.101.1.4.2.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleBackupControlServerAddress 1.3.6.1.4.1.6296.101.1.4.2.13
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleBackupNotification 1.3.6.1.4.1.6296.101.1.4.3
OBJECT IDENTIFIER    

sleBackupCreated 1.3.6.1.4.1.6296.101.1.4.3.1
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBackupDestroyed 1.3.6.1.4.1.6296.101.1.4.3.2
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBackupChanged 1.3.6.1.4.1.6296.101.1.4.3.3
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBackupConfigBySftpChanged 1.3.6.1.4.1.6296.101.1.4.3.4
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBackupConfigByScpChanged 1.3.6.1.4.1.6296.101.1.4.3.5
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBackupKeyBySftpChanged 1.3.6.1.4.1.6296.101.1.4.3.6
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleBackupKeyByScpChanged 1.3.6.1.4.1.6296.101.1.4.3.7
Description
Status: current Access: read-write
NOTIFICATION-TYPE    

sleProcess 1.3.6.1.4.1.6296.101.1.5
OBJECT IDENTIFIER    

sleProcessTable 1.3.6.1.4.1.6296.101.1.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleProcessEntry

sleProcessEntry 1.3.6.1.4.1.6296.101.1.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleProcessEntry  

sleProcessID 1.3.6.1.4.1.6296.101.1.5.1.1.1
Process ID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleProcessUser 1.3.6.1.4.1.6296.101.1.5.1.1.2
Owner name of the process
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleProcessCPU 1.3.6.1.4.1.6296.101.1.5.1.1.3
Percent CPU usage (unit : 0.1%)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleProcessMemory 1.3.6.1.4.1.6296.101.1.5.1.1.4
Percent real memory usage (unit : 0.1%)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleProcessVSZ 1.3.6.1.4.1.6296.101.1.5.1.1.5
Virtual address size for the process
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleProcessRSS 1.3.6.1.4.1.6296.101.1.5.1.1.6
Residnet set size of the process
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleProcessTerminal 1.3.6.1.4.1.6296.101.1.5.1.1.7
Terminal for the process
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleProcessStatus 1.3.6.1.4.1.6296.101.1.5.1.1.8
Symbolic process status
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleProcessStartTime 1.3.6.1.4.1.6296.101.1.5.1.1.9
Start time of the process
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleProcessUsedTime 1.3.6.1.4.1.6296.101.1.5.1.1.10
Current CPU time used
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleProcessCommand 1.3.6.1.4.1.6296.101.1.5.1.1.11
Command for the process
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleNTP 1.3.6.1.4.1.6296.101.1.6
OBJECT IDENTIFIER    

sleNTPServerTable 1.3.6.1.4.1.6296.101.1.6.1
The NTP Server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleNTPServerEntry

sleNTPServerEntry 1.3.6.1.4.1.6296.101.1.6.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleNTPServerEntry  

sleNTPServerName 1.3.6.1.4.1.6296.101.1.6.1.1.1
The NTP server name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

sleNtpServerAuthenticationKey 1.3.6.1.4.1.6296.101.1.6.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleNtpServerVRFIndex 1.3.6.1.4.1.6296.101.1.6.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleNtpServerPrefer 1.3.6.1.4.1.6296.101.1.6.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sleNtpServerVersion 1.3.6.1.4.1.6296.101.1.6.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), version1(1), version2(2), version3(3), version4(4)  

sleNTPServerControl 1.3.6.1.4.1.6296.101.1.6.2
OBJECT IDENTIFIER    

sleNTPServerControlRequest 1.3.6.1.4.1.6296.101.1.6.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createNTPServer(1), destoryNTPServer(2)  

sleNTPServerControlStatus 1.3.6.1.4.1.6296.101.1.6.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleNTPServerControlTimer 1.3.6.1.4.1.6296.101.1.6.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleNTPServerControlTImeStamp 1.3.6.1.4.1.6296.101.1.6.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleNTPServerControlReqResult 1.3.6.1.4.1.6296.101.1.6.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleNTPServerControlName 1.3.6.1.4.1.6296.101.1.6.2.6
The NTP server name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

sleNtpServerControlAuthenticationKey 1.3.6.1.4.1.6296.101.1.6.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleNtpServerControlVRFIndex 1.3.6.1.4.1.6296.101.1.6.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleNtpServerControlType 1.3.6.1.4.1.6296.101.1.6.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ntp(0), sntp(1)  

sleNtpServerControlPrefer 1.3.6.1.4.1.6296.101.1.6.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

sleNtpServerControlVersion 1.3.6.1.4.1.6296.101.1.6.2.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), version1(1), version2(2), version3(3), version4(4)  

sleNTPServerNotification 1.3.6.1.4.1.6296.101.1.6.3
OBJECT IDENTIFIER    

sleNTPServerCreated 1.3.6.1.4.1.6296.101.1.6.3.1
Created NTP Server table entry.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleNTPServerDestroyed 1.3.6.1.4.1.6296.101.1.6.3.2
Destroyed NTP Server table entry.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSyslogConf 1.3.6.1.4.1.6296.101.1.7
OBJECT IDENTIFIER    

sleSyslogConfTable 1.3.6.1.4.1.6296.101.1.7.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSyslogConfEntry

sleSyslogConfEntry 1.3.6.1.4.1.6296.101.1.7.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSyslogConfEntry  

sleSyslogConfIndex 1.3.6.1.4.1.6296.101.1.7.1.1.1
Message index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

sleSyslogConfMode 1.3.6.1.4.1.6296.101.1.7.1.1.2
Name of the facility that generated message.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER general(0), priority(1)  

sleSyslogConfFacility 1.3.6.1.4.1.6296.101.1.7.1.1.3
Name of the facility that generated message. 16~23: local
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auth(0), authpriv(1), kern(2), local0(3), local1(4), local2(5), local3(6), local4(7), local5(8), local6(9), local7(10), syslog(11), user(12), nomap(99)  

sleSyslogConfSeverity 1.3.6.1.4.1.6296.101.1.7.1.1.4
The severity of the message
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7), other(99)  

sleSyslogConfTarget 1.3.6.1.4.1.6296.101.1.7.1.1.5
Target type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local(1), consol(2), remote(3), external(4)  

sleSyslogConfStorage 1.3.6.1.4.1.6296.101.1.7.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(-1), volatile(0), nonvolatile(1), sdcardsfu(2), sdcard(3)  

sleSyslogConfTargetAddress 1.3.6.1.4.1.6296.101.1.7.1.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSyslogConfRemoteAddrType 1.3.6.1.4.1.6296.101.1.7.1.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

sleSyslogConfRemoteAddress 1.3.6.1.4.1.6296.101.1.7.1.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

sleSyslogConfVRFIndex 1.3.6.1.4.1.6296.101.1.7.1.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSyslogConfSlotIndex 1.3.6.1.4.1.6296.101.1.7.1.1.11
Slot Index in case of chassis type.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSyslogConfControl 1.3.6.1.4.1.6296.101.1.7.2
OBJECT IDENTIFIER    

sleSyslogConfControlRequest 1.3.6.1.4.1.6296.101.1.7.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createSyslogConf(1), destroySyslogConf(2), createSyslogConfEx(3), destroySyslgConfEx(4)  

sleSyslogConfControlStatus 1.3.6.1.4.1.6296.101.1.7.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSyslogConfControlTimer 1.3.6.1.4.1.6296.101.1.7.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSyslogConfControlTimeStamp 1.3.6.1.4.1.6296.101.1.7.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSyslogConfControlReqResult 1.3.6.1.4.1.6296.101.1.7.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSyslogConfControlIndex 1.3.6.1.4.1.6296.101.1.7.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSyslogConfControlMode 1.3.6.1.4.1.6296.101.1.7.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER general(0), priority(1)  

sleSyslogConfControlSeverity 1.3.6.1.4.1.6296.101.1.7.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7), other(99)  

sleSyslogConfControlFacility 1.3.6.1.4.1.6296.101.1.7.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auth(0), authpriv(1), kern(2), local0(3), local1(4), local2(5), local3(6), local4(7), local5(8), local6(9), local7(10), syslog(11), user(12), nomap(99)  

sleSyslogConfControlTarget 1.3.6.1.4.1.6296.101.1.7.2.10
Target type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local(1), consol(2), remote(3)  

sleSyslogConfControlStorage 1.3.6.1.4.1.6296.101.1.7.2.11
Description
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notAvailable(-1), volatile(0), nonvolatile(1)  

sleSyslogConfControlTargetAddress 1.3.6.1.4.1.6296.101.1.7.2.12
Description
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleSyslogConfControlRemoteAddrType 1.3.6.1.4.1.6296.101.1.7.2.13
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleSyslogConfControlRemoteAddress 1.3.6.1.4.1.6296.101.1.7.2.14
Description.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleSyslogConfControlVRFIndex 1.3.6.1.4.1.6296.101.1.7.2.15
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSyslogConfControlSlotIndex 1.3.6.1.4.1.6296.101.1.7.2.16
Slot Index in case of chassis type
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleSyslogConfNotification 1.3.6.1.4.1.6296.101.1.7.3
OBJECT IDENTIFIER    

sleSyslogConfCreated 1.3.6.1.4.1.6296.101.1.7.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSyslogConfDestroyed 1.3.6.1.4.1.6296.101.1.7.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSyslogConfExCreated 1.3.6.1.4.1.6296.101.1.7.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSyslogConfExDestroyed 1.3.6.1.4.1.6296.101.1.7.3.4
destroySyslgConfEx
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSyslogHistVol 1.3.6.1.4.1.6296.101.1.8
OBJECT IDENTIFIER    

sleSyslogHistVolTable 1.3.6.1.4.1.6296.101.1.8.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSyslogHistVolEntry

sleSyslogHistVolEntry 1.3.6.1.4.1.6296.101.1.8.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSyslogHistVolEntry  

sleSyslogHistVolIndex 1.3.6.1.4.1.6296.101.1.8.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSyslogHistVolMsgText 1.3.6.1.4.1.6296.101.1.8.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSyslogHistVolTime 1.3.6.1.4.1.6296.101.1.8.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSyslogHistNVol 1.3.6.1.4.1.6296.101.1.9
OBJECT IDENTIFIER    

sleSyslogHistNVolTable 1.3.6.1.4.1.6296.101.1.9.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSyslogHistNVolEntry

sleSyslogHistNVolEntry 1.3.6.1.4.1.6296.101.1.9.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSyslogHistNVolEntry  

sleSyslogHistNVolIndex 1.3.6.1.4.1.6296.101.1.9.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleSyslogHistNVolMsgText 1.3.6.1.4.1.6296.101.1.9.1.1.2
The text of the message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSyslogHistNVolTime 1.3.6.1.4.1.6296.101.1.9.1.1.3
The value of sysUpTime when this message was generated
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSSHRemote 1.3.6.1.4.1.6296.101.1.10
OBJECT IDENTIFIER    

sleSSHRemoteTable 1.3.6.1.4.1.6296.101.1.10.1
The table of remote connection's to this SSH Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSSHRemoteEntry

sleSSHRemoteEntry 1.3.6.1.4.1.6296.101.1.10.1.1
Remote SSH connection entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSSHRemoteEntry  

sleSSHRemoteIndex 1.3.6.1.4.1.6296.101.1.10.1.1.1
Proccess ID of remote SSH Client connected to SSH Server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleSSHRemoteUser 1.3.6.1.4.1.6296.101.1.10.1.1.2
Remote user ID connected to SSH Server.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

sleSSHRemoteHost 1.3.6.1.4.1.6296.101.1.10.1.1.3
Remote host IP address connected to SSH Server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleSSHRemoteTime 1.3.6.1.4.1.6296.101.1.10.1.1.4
Connection time to SSH Server of this remote user.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sleSSHRemoteFromHost 1.3.6.1.4.1.6296.101.1.10.1.1.5
Remote host Information connected to SSH Server.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSSHRemoteControl 1.3.6.1.4.1.6296.101.1.10.2
OBJECT IDENTIFIER    

sleSSHRemoteControlRequest 1.3.6.1.4.1.6296.101.1.10.2.1
Control Request.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER destorySshRemoteConnection(1)  

sleSSHRemoteControlStatus 1.3.6.1.4.1.6296.101.1.10.2.2
Control Status.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSSHRemoteControlTimer 1.3.6.1.4.1.6296.101.1.10.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSSHRemoteControlTImeStamp 1.3.6.1.4.1.6296.101.1.10.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSSHRemoteControlReqResult 1.3.6.1.4.1.6296.101.1.10.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSSHRemoteControlIndex 1.3.6.1.4.1.6296.101.1.10.2.6
Proccess ID of remote SSH Client connected to SSH Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sleSSHRemoteNotification 1.3.6.1.4.1.6296.101.1.10.3
OBJECT IDENTIFIER    

sleSSHRemoteConnectiondestoryed 1.3.6.1.4.1.6296.101.1.10.3.1
Destroyed the remote connection to this SSH Server.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCli 1.3.6.1.4.1.6296.101.1.11
OBJECT IDENTIFIER    

sleAutoCliInfo 1.3.6.1.4.1.6296.101.1.11.1
OBJECT IDENTIFIER    

sleAutoCliBase 1.3.6.1.4.1.6296.101.1.11.1.1
OBJECT IDENTIFIER    

sleAutoCliConfStatus 1.3.6.1.4.1.6296.101.1.11.1.1.1
The administrative state of AutoCli Scheduler
Status: current Access: read-only
OBJECT-TYPE    
  EnableFlag  

sleAutoCliMemoryMaxSize 1.3.6.1.4.1.6296.101.1.11.1.1.2
The max memory size to save output-file
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliMemoryUsedsize 1.3.6.1.4.1.6296.101.1.11.1.1.3
The used memory size to save output-file
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliMemoryFreesize 1.3.6.1.4.1.6296.101.1.11.1.1.4
The freed memory size to save output-file
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliTransferInterval 1.3.6.1.4.1.6296.101.1.11.1.1.5
The amount of time between the transference of outputfile
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliBaseControl 1.3.6.1.4.1.6296.101.1.11.1.2
OBJECT IDENTIFIER    

sleAutoCliControlRequest 1.3.6.1.4.1.6296.101.1.11.1.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setAutoCliStatus(1), setMemoryMaxsize(2), setTransferInterval(3)  

sleAutoCliControlStatus 1.3.6.1.4.1.6296.101.1.11.1.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoCliControlTimer 1.3.6.1.4.1.6296.101.1.11.1.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoCliControlTimeStamp 1.3.6.1.4.1.6296.101.1.11.1.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoCliControlReqResult 1.3.6.1.4.1.6296.101.1.11.1.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoCliControlConfStatus 1.3.6.1.4.1.6296.101.1.11.1.2.6
The IpAddress of FTP/TFTP server to save output-file
Status: current Access: read-write
OBJECT-TYPE    
  EnableFlag  

sleAutoCliControlMemoryMaxsize 1.3.6.1.4.1.6296.101.1.11.1.2.7
The max memory size to save output-file
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoCliControlTransferInterval 1.3.6.1.4.1.6296.101.1.11.1.2.8
The amount of time between the transference of outputfile
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoCliBaseNotification 1.3.6.1.4.1.6296.101.1.11.1.3
OBJECT IDENTIFIER    

sleAutoCliStatusChanged 1.3.6.1.4.1.6296.101.1.11.1.3.1
Change auto cli administrative status.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliMemoryMaxsizeChanged 1.3.6.1.4.1.6296.101.1.11.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliTransferIntervalChanged 1.3.6.1.4.1.6296.101.1.11.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliScriptFile 1.3.6.1.4.1.6296.101.1.11.2
OBJECT IDENTIFIER    

sleAutoCliScriptFileTable 1.3.6.1.4.1.6296.101.1.11.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAutoCliScriptFileEntry

sleAutoCliScriptFileEntry 1.3.6.1.4.1.6296.101.1.11.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAutoCliScriptFileEntry  

sleAutoCliScriptId 1.3.6.1.4.1.6296.101.1.11.2.1.1.1
The id of script file
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleAutoCliScriptFileName 1.3.6.1.4.1.6296.101.1.11.2.1.1.2
The name of script file
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScriptFileUser 1.3.6.1.4.1.6296.101.1.11.2.1.1.3
The user of script file
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScriptFileSize 1.3.6.1.4.1.6296.101.1.11.2.1.1.4
The File size of script file
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliScriptFileUpdateTime 1.3.6.1.4.1.6296.101.1.11.2.1.1.5
The last updated time of script file
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScriptFileControl 1.3.6.1.4.1.6296.101.1.11.2.2
OBJECT IDENTIFIER    

sleAutoCliScriptFileControlRequest 1.3.6.1.4.1.6296.101.1.11.2.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ftpgetAutoCliScript(1), tftpgetAutoCliScript(2), destroyedAutoCliScript(3)  

sleAutoCliScriptFileControlStatus 1.3.6.1.4.1.6296.101.1.11.2.2.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleControlStatusType  

sleAutoCliScriptFileControlTimer 1.3.6.1.4.1.6296.101.1.11.2.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoCliScriptFileControlTimeStamp 1.3.6.1.4.1.6296.101.1.11.2.2.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  TimeTicks  

sleAutoCliScriptFileControlReqResult 1.3.6.1.4.1.6296.101.1.11.2.2.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoCliScriptFileControlIpAddress 1.3.6.1.4.1.6296.101.1.11.2.2.6
The ip address of FTP server to get a script file.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleAutoCliScriptFileControlUserName 1.3.6.1.4.1.6296.101.1.11.2.2.7
The user name of FTP server to get a script file
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScriptFileControlPassword 1.3.6.1.4.1.6296.101.1.11.2.2.8
The password of FTP server to get a script file
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScriptFileControlFilePath 1.3.6.1.4.1.6296.101.1.11.2.2.9
The file-path of FTP server to get a script file
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScriptFileControlScriptName 1.3.6.1.4.1.6296.101.1.11.2.2.10
The script file name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScriptFileNotifications 1.3.6.1.4.1.6296.101.1.11.2.3
OBJECT IDENTIFIER    

sleAutoCliScriptFileFtpCreated 1.3.6.1.4.1.6296.101.1.11.2.3.1
ftpgetAutoCliScript
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliScriptFileTftpCreated 1.3.6.1.4.1.6296.101.1.11.2.3.2
tftpgetAutoCliScript
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliScriptFileDestroyed 1.3.6.1.4.1.6296.101.1.11.2.3.3
destroyedAutoCliScript
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliSchedule 1.3.6.1.4.1.6296.101.1.11.3
OBJECT IDENTIFIER    

sleAutoCliScheduleTable 1.3.6.1.4.1.6296.101.1.11.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAutoCliScheduleEntry

sleAutoCliScheduleEntry 1.3.6.1.4.1.6296.101.1.11.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAutoCliScheduleEntry  

sleAutoCliScheduleName 1.3.6.1.4.1.6296.101.1.11.3.1.1.1
The name of the schedule name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScheduleType 1.3.6.1.4.1.6296.101.1.11.3.1.1.2
The type of schedule. Periodic(1) - scheduled with regular intervals. At(2) - scheduled for exactly time. Daily(3) - scheduled for every day. Immediate(4) - scheduled immediately
Status: current Access: read-only
OBJECT-TYPE    
  SleDefAutoCliScheduleType  

sleAutoCliScheduleInterval 1.3.6.1.4.1.6296.101.1.11.3.1.1.3
The period of execution time.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleYear 1.3.6.1.4.1.6296.101.1.11.3.1.1.4
The value of the year
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleMonth 1.3.6.1.4.1.6296.101.1.11.3.1.1.5
The value of the month
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleDay 1.3.6.1.4.1.6296.101.1.11.3.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleHour 1.3.6.1.4.1.6296.101.1.11.3.1.1.7
The value of the hour
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleMinute 1.3.6.1.4.1.6296.101.1.11.3.1.1.8
The value of the minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleScriptName 1.3.6.1.4.1.6296.101.1.11.3.1.1.9
The name of the script file
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScheduleTransferType 1.3.6.1.4.1.6296.101.1.11.3.1.1.10
The type of the transferation that indicate way to save output file
Status: current Access: read-only
OBJECT-TYPE    
  SleDefAutoCliScheduleTransferType  

sleAutoCliScheduleLastExecutedTime 1.3.6.1.4.1.6296.101.1.11.3.1.1.11
The time of the last executed time
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScheduleOutputRule 1.3.6.1.4.1.6296.101.1.11.3.1.1.12
The Rule of the output file name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScheduleLastResult 1.3.6.1.4.1.6296.101.1.11.3.1.1.13
The result of the last executed
Status: current Access: read-only
OBJECT-TYPE    
  SleDefAutoCliScheduleResult  

sleAutoCliScheduleProfileName 1.3.6.1.4.1.6296.101.1.11.3.1.1.14
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

sleAutoCliScheduleControl 1.3.6.1.4.1.6296.101.1.11.3.2
OBJECT IDENTIFIER    

sleAutoCliScheduleControlRequest 1.3.6.1.4.1.6296.101.1.11.3.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createAutoCliSchedule(1), destroyAutoCliSchedule(2)  

sleAutoCliScheduleControlStatus 1.3.6.1.4.1.6296.101.1.11.3.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoCliScheduleControlTimer 1.3.6.1.4.1.6296.101.1.11.3.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoCliScheduleControlTimeStamp 1.3.6.1.4.1.6296.101.1.11.3.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoCliScheduleControlReqResult 1.3.6.1.4.1.6296.101.1.11.3.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoCliScheduleControlName 1.3.6.1.4.1.6296.101.1.11.3.2.6
The name of the schedule name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScheduleControlType 1.3.6.1.4.1.6296.101.1.11.3.2.7
The type of schedule. Periodic(1) - scheduled with regular intervals. At(2) - scheduled for exactly time. Daily(3) - scheduled for every day. Immediate(4) - scheduled immediately
Status: current Access: read-write
OBJECT-TYPE    
  SleDefAutoCliScheduleType  

sleAutoCliScheduleControlInterval 1.3.6.1.4.1.6296.101.1.11.3.2.8
The period of execution time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleControlYear 1.3.6.1.4.1.6296.101.1.11.3.2.9
The value of the year
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleControlMonth 1.3.6.1.4.1.6296.101.1.11.3.2.10
The value of the month
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleControlDay 1.3.6.1.4.1.6296.101.1.11.3.2.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleControlHour 1.3.6.1.4.1.6296.101.1.11.3.2.12
The value of the hour
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleControlMinute 1.3.6.1.4.1.6296.101.1.11.3.2.13
The value of the minute
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoCliScheduleControlScriptName 1.3.6.1.4.1.6296.101.1.11.3.2.14
The name of the script file
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScheduleControlTransferType 1.3.6.1.4.1.6296.101.1.11.3.2.15
The type of the transferation that indicate way to save output file
Status: current Access: read-write
OBJECT-TYPE    
  SleDefAutoCliScheduleTransferType  

sleAutoCliScheduleControlOutputRule 1.3.6.1.4.1.6296.101.1.11.3.2.16
The Rule of the output file name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliScheduleControlProfileName 1.3.6.1.4.1.6296.101.1.11.3.2.17
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

sleAutoCliScheduleNotifications 1.3.6.1.4.1.6296.101.1.11.3.3
OBJECT IDENTIFIER    

sleAutoCliScheduleCreated 1.3.6.1.4.1.6296.101.1.11.3.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliScheduleDestroyed 1.3.6.1.4.1.6296.101.1.11.3.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliProfile 1.3.6.1.4.1.6296.101.1.11.4
OBJECT IDENTIFIER    

sleAutoCliProfileTable 1.3.6.1.4.1.6296.101.1.11.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAutoCliProfileEntry

sleAutoCliProfileEntry 1.3.6.1.4.1.6296.101.1.11.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAutoCliProfileEntry  

sleAutoCliProfileName 1.3.6.1.4.1.6296.101.1.11.4.1.1.1
The name of the profile name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

sleAutoCliProfileType 1.3.6.1.4.1.6296.101.1.11.4.1.1.2
The name of the profile type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tftp(1), ftp(2)  

sleAutoCliProfileControl 1.3.6.1.4.1.6296.101.1.11.4.2
OBJECT IDENTIFIER    

sleAutoCliProfileControlRequest 1.3.6.1.4.1.6296.101.1.11.4.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createAutoCliProfile(1), destroyAutoCliProfile(2)  

sleAutoCliProfileControlStatus 1.3.6.1.4.1.6296.101.1.11.4.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoCliProfileControlTimer 1.3.6.1.4.1.6296.101.1.11.4.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoCliProfileControlTimeStamp 1.3.6.1.4.1.6296.101.1.11.4.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoCliProfileControlReqResult 1.3.6.1.4.1.6296.101.1.11.4.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoCliProfileControlName 1.3.6.1.4.1.6296.101.1.11.4.2.6
The name of the profile name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

sleAutoCliProfileControlType 1.3.6.1.4.1.6296.101.1.11.4.2.7
The name of the profile type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tftp(1), ftp(2)  

sleAutoCliProfileNotifications 1.3.6.1.4.1.6296.101.1.11.4.3
OBJECT IDENTIFIER    

sleAutoCliProfileCreated 1.3.6.1.4.1.6296.101.1.11.4.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliProfileDestroyed 1.3.6.1.4.1.6296.101.1.11.4.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliProfileServer 1.3.6.1.4.1.6296.101.1.11.5
OBJECT IDENTIFIER    

sleAutoCliProfileServerTable 1.3.6.1.4.1.6296.101.1.11.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAutoCliProfileServerEntry

sleAutoCliProfileServerEntry 1.3.6.1.4.1.6296.101.1.11.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAutoCliProfileServerEntry  

sleAutoCliProfileServerType 1.3.6.1.4.1.6296.101.1.11.5.1.1.1
The name of the profile's remote-server type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tftp(1), ftp(2)  

sleAutoCliProfileServerIpAddress 1.3.6.1.4.1.6296.101.1.11.5.1.1.2
The name of the profile's remote-server ip.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleAutoCliProfileServerUser 1.3.6.1.4.1.6296.101.1.11.5.1.1.3
The name of the profile's remote-server user.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sleAutoCliProfileServerPassword 1.3.6.1.4.1.6296.101.1.11.5.1.1.4
The name of the profile's remote-server password.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sleAutoCliProfileServerDir 1.3.6.1.4.1.6296.101.1.11.5.1.1.5
The name of the profile's remote-server directory.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sleAutoCliProfileServerControl 1.3.6.1.4.1.6296.101.1.11.5.2
OBJECT IDENTIFIER    

sleAutoCliProfileServerControlRequest 1.3.6.1.4.1.6296.101.1.11.5.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createAutoCliProfileServer(1), destroyAutoCliProfileServer(2), destroyAutoCliProfileServerAll(3)  

sleAutoCliProfileServerControlStatus 1.3.6.1.4.1.6296.101.1.11.5.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoCliProfileServerControlTimer 1.3.6.1.4.1.6296.101.1.11.5.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoCliProfileServerControlTimeStamp 1.3.6.1.4.1.6296.101.1.11.5.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoCliProfileServerControlReqResult 1.3.6.1.4.1.6296.101.1.11.5.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoCliProfileServerControlProfName 1.3.6.1.4.1.6296.101.1.11.5.2.6
The name of the profile name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

sleAutoCliProfileServerControlIpAddress 1.3.6.1.4.1.6296.101.1.11.5.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleAutoCliProfileServerControlUser 1.3.6.1.4.1.6296.101.1.11.5.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sleAutoCliProfileServerControlPassword 1.3.6.1.4.1.6296.101.1.11.5.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

sleAutoCliProfileServerControlDir 1.3.6.1.4.1.6296.101.1.11.5.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

sleAutoCliProfileServerNotifications 1.3.6.1.4.1.6296.101.1.11.5.3
OBJECT IDENTIFIER    

sleAutoCliProfileServerCreated 1.3.6.1.4.1.6296.101.1.11.5.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliProfileServerDestroyed 1.3.6.1.4.1.6296.101.1.11.5.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliProfileServerAllDestroyed 1.3.6.1.4.1.6296.101.1.11.5.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliOutputMemory 1.3.6.1.4.1.6296.101.1.11.6
OBJECT IDENTIFIER    

sleAutoCliOutputMemoryFileTable 1.3.6.1.4.1.6296.101.1.11.6.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAutoCliOutputMemoryFileEntry

sleAutoCliOutputMemoryFileEntry 1.3.6.1.4.1.6296.101.1.11.6.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAutoCliOutputMemoryFileEntry  

sleAutoCliOutputMemoryFileId 1.3.6.1.4.1.6296.101.1.11.6.1.1.1
The id of the output file.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleAutoCliOutputMemoryFileName 1.3.6.1.4.1.6296.101.1.11.6.1.1.2
The name of the output file.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliOutputMemoryFileSize 1.3.6.1.4.1.6296.101.1.11.6.1.1.3
The file-size of the output file.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoCliOutputMemoryFileUpdatedTime 1.3.6.1.4.1.6296.101.1.11.6.1.1.4
The updated time of the output file
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliOutputMemoryFileControl 1.3.6.1.4.1.6296.101.1.11.6.2
OBJECT IDENTIFIER    

sleAutoCliOutputMemoryFileControlRequest 1.3.6.1.4.1.6296.101.1.11.6.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ftpputOutputFile(1), tftpputOutputFile(2), destroyOutputFile(3)  

sleAutoCliOutputMemoryFileControlStatus 1.3.6.1.4.1.6296.101.1.11.6.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoCliOutputMemoryFileControlTimer 1.3.6.1.4.1.6296.101.1.11.6.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoCliOutputMemoryFileControlTimeStamp 1.3.6.1.4.1.6296.101.1.11.6.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoCliOutputMemoryFileControlReqResult 1.3.6.1.4.1.6296.101.1.11.6.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoCliOutputMemoryFileControlServer 1.3.6.1.4.1.6296.101.1.11.6.2.6
The Ipaddress of the ftp server to put the output file.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleAutoCliOutputMemoryFileControlUserName 1.3.6.1.4.1.6296.101.1.11.6.2.7
The username of the ftp server to put the output file.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliOutputMemoryFileControlPassword 1.3.6.1.4.1.6296.101.1.11.6.2.8
The password of the ftp server to put the output file.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliOutputMemoryFileControlOutputFileName 1.3.6.1.4.1.6296.101.1.11.6.2.9
The output file name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliOutputMemoryFileControlRemotePath 1.3.6.1.4.1.6296.101.1.11.6.2.10
The remote path of the ftp server to put the output file
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoCliOutputMemoryFileNotification 1.3.6.1.4.1.6296.101.1.11.6.3
OBJECT IDENTIFIER    

sleAutoCliOutputMemoryFileFtpCreated 1.3.6.1.4.1.6296.101.1.11.6.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliOutputMemoryFileTftpCreated 1.3.6.1.4.1.6296.101.1.11.6.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoCliOutputMemoryFileDestroyed 1.3.6.1.4.1.6296.101.1.11.6.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoReset 1.3.6.1.4.1.6296.101.1.12
OBJECT IDENTIFIER    

sleAutoResetPing 1.3.6.1.4.1.6296.101.1.12.1
OBJECT IDENTIFIER    

sleAutoResetPingInfo 1.3.6.1.4.1.6296.101.1.12.1.1
OBJECT IDENTIFIER    

sleAutoResetPingConfStatus 1.3.6.1.4.1.6296.101.1.12.1.1.1
The administrative state of AutoResetPing
Status: current Access: read-only
OBJECT-TYPE    
  EnableFlag  

sleAutoResetPingIpAddress 1.3.6.1.4.1.6296.101.1.12.1.1.2
Gateway Ip address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleAutoResetPingTransactionInterval 1.3.6.1.4.1.6296.101.1.12.1.1.3
The interval between ping transaction (10 - 86400)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetPingNumberOfRequest 1.3.6.1.4.1.6296.101.1.12.1.1.4
The number of ping request in 1 transaction (1-10)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetPingRequestInterval 1.3.6.1.4.1.6296.101.1.12.1.1.5
The interval between ping request (1 - 100)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetPingTimeoutOfRequest 1.3.6.1.4.1.6296.101.1.12.1.1.6
The timeout value for waiting reply message (1 - 10)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetPingLossThreshold 1.3.6.1.4.1.6296.101.1.12.1.1.7
The threshold value of ping-transaction loss count for reset. (1 - 100) If ping-transaction loss count is reached at this value, The system will be reset
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetPingEnableTime 1.3.6.1.4.1.6296.101.1.12.1.1.8
The time of the autoresetping status was enabled
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoResetPingRequestCount 1.3.6.1.4.1.6296.101.1.12.1.1.9
The count of request message in current transaction
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetPingReplyCount 1.3.6.1.4.1.6296.101.1.12.1.1.10
The count of reply message in current transaction
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetPingLossCount 1.3.6.1.4.1.6296.101.1.12.1.1.11
The count of loss message in current transaction
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetPingTotalPingTransaction 1.3.6.1.4.1.6296.101.1.12.1.1.12
The total count of ping transaction
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleAutoResetPingTotalLossTransaction 1.3.6.1.4.1.6296.101.1.12.1.1.13
The total count of loss transaction
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleAutoResetPingRebootThreshold 1.3.6.1.4.1.6296.101.1.12.1.1.14
The threshold of reboot-counter for autoReset. (1 - 100) If system is rebooted more than this value, system is not automatically reset anymore.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

sleAutoResetPingRebootCounter 1.3.6.1.4.1.6296.101.1.12.1.1.15
The count of system-reboot
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetPingRebootRecoveryTime 1.3.6.1.4.1.6296.101.1.12.1.1.16
The reboot recovery time 10-14400(minute)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 10..14400  

sleAutoResetPingControl 1.3.6.1.4.1.6296.101.1.12.1.2
OBJECT IDENTIFIER    

sleAutoResetPingControlRequest 1.3.6.1.4.1.6296.101.1.12.1.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setAutoResetPingStatus(1), modifyAutoResetPingInfo(2), setAutoResetPingRebootCtrl(3), clearAutoResetPingRebootCounter(4)  

sleAutoResetPingControlStatus 1.3.6.1.4.1.6296.101.1.12.1.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoResetPingControlTimer 1.3.6.1.4.1.6296.101.1.12.1.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoResetPingControlTimeStamp 1.3.6.1.4.1.6296.101.1.12.1.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoResetPingControlReqResult 1.3.6.1.4.1.6296.101.1.12.1.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoResetPingControlConfStatus 1.3.6.1.4.1.6296.101.1.12.1.2.6
The administrative state of AutoResetPing
Status: current Access: read-write
OBJECT-TYPE    
  EnableFlag  

sleAutoResetPingControlIpAddress 1.3.6.1.4.1.6296.101.1.12.1.2.7
Gateway Ip address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleAutoResetPingControlTransactionInterval 1.3.6.1.4.1.6296.101.1.12.1.2.8
The interval between ping transaction (10 - 86400)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetPingControlNumberOfRequest 1.3.6.1.4.1.6296.101.1.12.1.2.9
The number of ping request in 1 transaction (1-10)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetPingControlRequestInterval 1.3.6.1.4.1.6296.101.1.12.1.2.10
The interval between ping request (1 - 100)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetPingControlTimeoutOfRequest 1.3.6.1.4.1.6296.101.1.12.1.2.11
The timeout value for waiting reply message (1 - 10)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetPingControlPingLossThreshold 1.3.6.1.4.1.6296.101.1.12.1.2.12
The threshold value of ping-transaction loss count for reset. (1 - 100) If ping-transaction loss count is reached at this value, The system will be reset
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetPingControlRebootThreshold 1.3.6.1.4.1.6296.101.1.12.1.2.13
The threshold of reboot-counter for autoReset. (1 - 100) If system is rebooted more than this value, system is not automatically reset anymore.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

sleAutoResetPingControlRebootRecoveryTime 1.3.6.1.4.1.6296.101.1.12.1.2.14
The reboot recovery time 10-14400(minute)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..14400  

sleAutoResetPingNotification 1.3.6.1.4.1.6296.101.1.12.1.3
OBJECT IDENTIFIER    

sleAutoResetPingStatusChanged 1.3.6.1.4.1.6296.101.1.12.1.3.1
setAutoResetPingStatus
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetPingInfoModified 1.3.6.1.4.1.6296.101.1.12.1.3.2
modifyAutoResetPingInfo
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetPingRebootCtrlModified 1.3.6.1.4.1.6296.101.1.12.1.3.3
setAutoResetPingRebootCtrl
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetPingRebootCountClearSetted 1.3.6.1.4.1.6296.101.1.12.1.3.4
clearAutoResetPingRebootCounter
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetMemoryleak 1.3.6.1.4.1.6296.101.1.12.2
OBJECT IDENTIFIER    

sleAutoResetMemoryleakInfo 1.3.6.1.4.1.6296.101.1.12.2.1
OBJECT IDENTIFIER    

sleAutoResetMemoryleakContStatus 1.3.6.1.4.1.6296.101.1.12.2.1.1
The administrative state of AutoResetMemoryleak.
Status: current Access: read-only
OBJECT-TYPE    
  EnableFlag  

sleAutoResetMemoryleakMemThreshold 1.3.6.1.4.1.6296.101.1.12.2.1.2
The threshold for the free memory size.(1 - 524288)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakCheckInterval 1.3.6.1.4.1.6296.101.1.12.2.1.3
The interval between check transaction. (10 - 86400)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakNumberOfVerification 1.3.6.1.4.1.6296.101.1.12.2.1.4
The number of verification in 1 transaction. (1 - 10)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakVerificationInterval 1.3.6.1.4.1.6296.101.1.12.2.1.5
The interval of verification. (1 - 10)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakCountThreshold 1.3.6.1.4.1.6296.101.1.12.2.1.6
The threshold of memory-leak count for reboot-process (1 - 100)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakEnableTime 1.3.6.1.4.1.6296.101.1.12.2.1.7
The time of the autoresetmemoryleak status was enabled
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoResetMemoryleakLastFreeMemory 1.3.6.1.4.1.6296.101.1.12.2.1.8
The size of free memory at last verification.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakVerificationCount 1.3.6.1.4.1.6296.101.1.12.2.1.9
The count of verification in current transaction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakDetectionCount 1.3.6.1.4.1.6296.101.1.12.2.1.10
The count of detection in current transaction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakTotalVerificationCount 1.3.6.1.4.1.6296.101.1.12.2.1.11
The total verification count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleAutoResetMemoryleakTotalDetectionCount 1.3.6.1.4.1.6296.101.1.12.2.1.12
The total detection count.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleAutoResetMemoryleakReboottimeStartHour 1.3.6.1.4.1.6296.101.1.12.2.1.13
The start time (hour) to be able to reboot (0 - 23) -1: no set
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..23  

sleAutoResetMemoryleakReboottimeStartMin 1.3.6.1.4.1.6296.101.1.12.2.1.14
The start time (minute) to be able to reboot (0 - 59) -1: no set
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..59  

sleAutoResetMemoryleakReboottimeEndHour 1.3.6.1.4.1.6296.101.1.12.2.1.15
The end time (hour) to be able to reboot (0 - 23) -1: no set
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..23  

sleAutoResetMemoryleakReboottimeEndMin 1.3.6.1.4.1.6296.101.1.12.2.1.16
The end time (minute) to be able to reboot (0 - 59) -1: no set
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..59  

sleAutoResetMemoryleakRebootThreshold 1.3.6.1.4.1.6296.101.1.12.2.1.17
The threshold of reboot-counter for autoReset. (1 - 100) If system is rebooted more than this value, system is not automatically reset anymore.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..100  

sleAutoResetMemoryleakRebootCount 1.3.6.1.4.1.6296.101.1.12.2.1.18
The count of system-reboot
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakControl 1.3.6.1.4.1.6296.101.1.12.2.2
OBJECT IDENTIFIER    

sleAutoResetMemoryleakControlRequest 1.3.6.1.4.1.6296.101.1.12.2.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setAutoResetMemoryleakStatus(1), modifyAutoResetMemoryleakInfo(2), modifyAutoResetMomoryleakReboottime(3), setAutoResetMemoryRebootCtrl(4), setAutoResetclearAutoResetRebootCounter(5)  

sleAutoResetMemoryleakControlStatus 1.3.6.1.4.1.6296.101.1.12.2.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoResetMemoryleakControlTimer 1.3.6.1.4.1.6296.101.1.12.2.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoResetMemoryleakControlTimeStamp 1.3.6.1.4.1.6296.101.1.12.2.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoResetMemoryleakControlReqResult 1.3.6.1.4.1.6296.101.1.12.2.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoResetMemoryleakControlConfStatus 1.3.6.1.4.1.6296.101.1.12.2.2.6
The administrative state of AutoResetMemoryleak.
Status: current Access: read-write
OBJECT-TYPE    
  EnableFlag  

sleAutoResetMemoryleakControlMemThreshold 1.3.6.1.4.1.6296.101.1.12.2.2.7
The threshold for the free memory size.(1 - 524288)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakControlCheckInterval 1.3.6.1.4.1.6296.101.1.12.2.2.8
The interval between check transaction. (10 - 86400)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakControlNumberOfVerification 1.3.6.1.4.1.6296.101.1.12.2.2.9
The number of verification in 1 transaction. (1 - 10)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakControlVerificationInterval 1.3.6.1.4.1.6296.101.1.12.2.2.10
The interval of verification. (1 - 10)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakControlCountThreshold 1.3.6.1.4.1.6296.101.1.12.2.2.11
The threshold of memory-leak count for reboot-process (1 - 100)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetMemoryleakControlReboottimeStartHour 1.3.6.1.4.1.6296.101.1.12.2.2.12
The start time (hour) to be able to reboot (0 - 23) -1: clear.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..23  

sleAutoResetMemoryleakControlReboottimeStartMin 1.3.6.1.4.1.6296.101.1.12.2.2.13
The start time (minute) to be able to reboot (0 - 59) -1: clear
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..59  

sleAutoResetMemoryleakControlReboottimeEndHour 1.3.6.1.4.1.6296.101.1.12.2.2.14
The end time (hour) to be able to reboot (0 - 23) -1: clear
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..23  

sleAutoResetMemoryleakControlReboottimeEndMin 1.3.6.1.4.1.6296.101.1.12.2.2.15
The end time (minute) to be able to reboot (0 - 59) -1: clear
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..59  

sleAutoResetMemoryleakControlRebootThreshold 1.3.6.1.4.1.6296.101.1.12.2.2.16
The threshold of reboot-counter for autoReset. If system is rebooted more than this value, system is not automatically reset anymore. (1 - 100)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

sleAutoResetMemoryleakNotification 1.3.6.1.4.1.6296.101.1.12.2.3
OBJECT IDENTIFIER    

sleAutoResetMemoryleakStatusChanged 1.3.6.1.4.1.6296.101.1.12.2.3.1
setAutoResetMemoryleakStatus
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetMemoryleakInfoModified 1.3.6.1.4.1.6296.101.1.12.2.3.2
modifyAutoResetMemoryleakInfo
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetMemoryleakReboottimeModified 1.3.6.1.4.1.6296.101.1.12.2.3.3
modifyAutoResetMomoryleakReboottime
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetMemoryleakRebootCtrlModified 1.3.6.1.4.1.6296.101.1.12.2.3.4
setAutoResetMemoryRebootCtrl
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetMemoryleakRebootCountClearSetted 1.3.6.1.4.1.6296.101.1.12.2.3.5
setAutoResetclearAutoResetRebootCounter
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetCpu 1.3.6.1.4.1.6296.101.1.12.3
OBJECT IDENTIFIER    

sleAutoResetCpuInfo 1.3.6.1.4.1.6296.101.1.12.3.1
OBJECT IDENTIFIER    

sleAutoResetCpuStatus 1.3.6.1.4.1.6296.101.1.12.3.1.1
The auto-reset cpu status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

sleAutoResetCpuLoad 1.3.6.1.4.1.6296.101.1.12.3.1.2
CPU load average per 1 min.(50 - 100)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 50..100  

sleAutoResetCpuInterruptLoad 1.3.6.1.4.1.6296.101.1.12.3.1.3
Interrupt load average per 1 min. (1 - 100)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

sleAutoResetCpuTime 1.3.6.1.4.1.6296.101.1.12.3.1.4
The continuation time.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoResetCpuControl 1.3.6.1.4.1.6296.101.1.12.3.2
OBJECT IDENTIFIER    

sleAutoResetCpuControlRequest 1.3.6.1.4.1.6296.101.1.12.3.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setAutoResetCpu(1), delAutoResetCpu(2)  

sleAutoResetCpuControlStatus 1.3.6.1.4.1.6296.101.1.12.3.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoResetCpuControlTimer 1.3.6.1.4.1.6296.101.1.12.3.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoResetCpuControlTimeStamp 1.3.6.1.4.1.6296.101.1.12.3.2.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoResetCpuControlReqResult 1.3.6.1.4.1.6296.101.1.12.3.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoResetCpuControlLoad 1.3.6.1.4.1.6296.101.1.12.3.2.6
CPU load average per 1 min.(50 - 100)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 50..100  

sleAutoResetCpuControlInterruptLoad 1.3.6.1.4.1.6296.101.1.12.3.2.7
Interrupt load average per 1 min. (1 - 100)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

sleAutoResetCpuControlTime 1.3.6.1.4.1.6296.101.1.12.3.2.8
The continuation time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoResetCpuNotification 1.3.6.1.4.1.6296.101.1.12.3.3
OBJECT IDENTIFIER    

sleAutoResetCpuChanged 1.3.6.1.4.1.6296.101.1.12.3.3.1
setAutoResetCpu
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetCpuDeleted 1.3.6.1.4.1.6296.101.1.12.3.3.2
delAutoResetCpu
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoResetInfo 1.3.6.1.4.1.6296.101.1.12.4
OBJECT IDENTIFIER    

sleAutoResetBootReason 1.3.6.1.4.1.6296.101.1.12.4.1
The Restart reason by auto-reset. (This is used only for trap string)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleCoreDump 1.3.6.1.4.1.6296.101.1.13
OBJECT IDENTIFIER    

sleCoreDumpInfoTable 1.3.6.1.4.1.6296.101.1.13.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleCoreDumpInfoEntry

sleCoreDumpInfoEntry 1.3.6.1.4.1.6296.101.1.13.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleCoreDumpInfoEntry  

sleCoreDumpInfoPID 1.3.6.1.4.1.6296.101.1.13.1.1.1
The process ID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleCoreDumpInfoStatus 1.3.6.1.4.1.6296.101.1.13.1.1.2
The status of PID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), fail(2)  

sleCoreDumpFile 1.3.6.1.4.1.6296.101.1.13.1.1.3
Created coredump file name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleCoreDumpControl 1.3.6.1.4.1.6296.101.1.13.2
OBJECT IDENTIFIER    

sleCoreDumpControlRequest 1.3.6.1.4.1.6296.101.1.13.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createCoredDumpEntry(1), destroyCoredDumpEntry(2), setCoredDumpEntryToRemote(3)  

sleCoreDumpControlStatus 1.3.6.1.4.1.6296.101.1.13.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleCoreDumpControlTimer 1.3.6.1.4.1.6296.101.1.13.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleCoreDumpControlTimeStamp 1.3.6.1.4.1.6296.101.1.13.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleCoreDumpControlReqResult 1.3.6.1.4.1.6296.101.1.13.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleCoreDumpControlPID 1.3.6.1.4.1.6296.101.1.13.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

sleCoreDumpControlServerIP 1.3.6.1.4.1.6296.101.1.13.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleCoreDumpControlUserID 1.3.6.1.4.1.6296.101.1.13.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleCoreDumpControlPassword 1.3.6.1.4.1.6296.101.1.13.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleCoreDumpControlCoredumpFile 1.3.6.1.4.1.6296.101.1.13.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleCoreDumpNotification 1.3.6.1.4.1.6296.101.1.13.3
OBJECT IDENTIFIER    

sleCoreDumpEntryCreated 1.3.6.1.4.1.6296.101.1.13.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleCoreDumpEntryDestroyed 1.3.6.1.4.1.6296.101.1.13.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleCoreDumpEntryChanged 1.3.6.1.4.1.6296.101.1.13.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleService 1.3.6.1.4.1.6296.101.1.14
OBJECT IDENTIFIER    

sleServiceTable 1.3.6.1.4.1.6296.101.1.14.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleServiceEntry

sleServiceEntry 1.3.6.1.4.1.6296.101.1.14.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleServiceEntry  

sleServiceIndex 1.3.6.1.4.1.6296.101.1.14.1.1.1
Service Index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ftpdata(20), ftp(21), ssh(22), telnet(23), tftp(69), snmp(161)  

sleServiceProtocol 1.3.6.1.4.1.6296.101.1.14.1.1.2
Service Protocol
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tcp(1), udp(2)  

sleServiceName 1.3.6.1.4.1.6296.101.1.14.1.1.3
Service name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleServicePort 1.3.6.1.4.1.6296.101.1.14.1.1.4
Service Port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleServiceAdminStatus 1.3.6.1.4.1.6296.101.1.14.1.1.5
The current status of service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleServiceControl 1.3.6.1.4.1.6296.101.1.14.2
OBJECT IDENTIFIER    

sleServiceControlRequest 1.3.6.1.4.1.6296.101.1.14.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setServicePort(1), setServiceStatus(2)  

sleServiceControlStatus 1.3.6.1.4.1.6296.101.1.14.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleServiceControlTimer 1.3.6.1.4.1.6296.101.1.14.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleServiceControlTimeStamp 1.3.6.1.4.1.6296.101.1.14.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleServiceControlReqResult 1.3.6.1.4.1.6296.101.1.14.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleServiceControlIndex 1.3.6.1.4.1.6296.101.1.14.2.6
Service Index
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ftpdata(20), ftp(21), ssh(22), telnet(23), tftp(69), snmp(161)  

sleServiceControlProtocol 1.3.6.1.4.1.6296.101.1.14.2.7
Service Protocol
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2)  

sleServiceControlPort 1.3.6.1.4.1.6296.101.1.14.2.8
Service Port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sleServiceControlAdminStatus 1.3.6.1.4.1.6296.101.1.14.2.9
The current status of service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleServiceNotification 1.3.6.1.4.1.6296.101.1.14.3
OBJECT IDENTIFIER    

sleServicePortChanged 1.3.6.1.4.1.6296.101.1.14.3.1
setServicePort
Status: current Access: read-write
NOTIFICATION-TYPE    

sleServiceAdminStatusChanged 1.3.6.1.4.1.6296.101.1.14.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemUser 1.3.6.1.4.1.6296.101.1.15
OBJECT IDENTIFIER    

sleSystemUserTable 1.3.6.1.4.1.6296.101.1.15.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSystemUserEntry

sleSystemUserEntry 1.3.6.1.4.1.6296.101.1.15.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSystemUserEntry  

sleSystemUserName 1.3.6.1.4.1.6296.101.1.15.1.1.1
User Name. where 'admin' is reserved name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleSystemUserLevel 1.3.6.1.4.1.6296.101.1.15.1.1.2
User's level
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

sleSystemUserPassword 1.3.6.1.4.1.6296.101.1.15.1.1.3
User's password (always encrypted)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleSystemUserDesc 1.3.6.1.4.1.6296.101.1.15.1.1.4
User Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleSystemUserLoginFailureCount 1.3.6.1.4.1.6296.101.1.15.1.1.5
The login failure count.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..10  

sleSystemUserLoginLastFailureTime 1.3.6.1.4.1.6296.101.1.15.1.1.6
The last login failure time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleSystemUserControl 1.3.6.1.4.1.6296.101.1.15.2
OBJECT IDENTIFIER    

sleSystemUserControlRequest 1.3.6.1.4.1.6296.101.1.15.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER addUser(1), renameUser(2), setPassword(3), deleteUser(4), setLevel(5), clearLoginAttemptsLog(6)  

sleSystemUserControlStatus 1.3.6.1.4.1.6296.101.1.15.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSystemUserControlTimer 1.3.6.1.4.1.6296.101.1.15.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSystemUserControlTimeStamp 1.3.6.1.4.1.6296.101.1.15.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSystemUserControlReqResult 1.3.6.1.4.1.6296.101.1.15.2.5
Result of the last command.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSystemUserControlName 1.3.6.1.4.1.6296.101.1.15.2.6
User Name. where 'admin' is reserved name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleSystemUserControlRename 1.3.6.1.4.1.6296.101.1.15.2.7
New User Name. where 'admin' is reserved name. (when rename user.)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

sleSystemUserControlLevel 1.3.6.1.4.1.6296.101.1.15.2.8
User's level
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

sleSystemUserControlPwType 1.3.6.1.4.1.6296.101.1.15.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER plain(1), encrypt(2)  

sleSystemUserControlPassword 1.3.6.1.4.1.6296.101.1.15.2.10
User's password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleSystemUserControlDesc 1.3.6.1.4.1.6296.101.1.15.2.11
User Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

sleSystemUserNotification 1.3.6.1.4.1.6296.101.1.15.3
OBJECT IDENTIFIER    

sleSystemUserCreated 1.3.6.1.4.1.6296.101.1.15.3.1
addUser
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemUserNameChanged 1.3.6.1.4.1.6296.101.1.15.3.2
renameUser
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemUserPasswordChanged 1.3.6.1.4.1.6296.101.1.15.3.3
setPassword
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemUserDestroyed 1.3.6.1.4.1.6296.101.1.15.3.4
deleteUser
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemUserLevelChanged 1.3.6.1.4.1.6296.101.1.15.3.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemUserLoginAttemptsFailureLogCleared 1.3.6.1.4.1.6296.101.1.15.3.6
clearLoginAttemptsLog
Status: current Access: read-write
NOTIFICATION-TYPE    

sleParameter 1.3.6.1.4.1.6296.101.1.16
OBJECT IDENTIFIER    

sleParameterTable 1.3.6.1.4.1.6296.101.1.16.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleParameterEntry

sleParameterEntry 1.3.6.1.4.1.6296.101.1.16.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleParameterEntry  

sleParameterName 1.3.6.1.4.1.6296.101.1.16.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

sleParameterValue 1.3.6.1.4.1.6296.101.1.16.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

sleParameterMode 1.3.6.1.4.1.6296.101.1.16.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), static(2)  

sleParameterControl 1.3.6.1.4.1.6296.101.1.16.2
OBJECT IDENTIFIER    

sleParameterControlRequest 1.3.6.1.4.1.6296.101.1.16.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createParameter(1), destroyParameter(2), modifyParameterMode(3), modifyParameterValue(4)  

sleParameterControlStatus 1.3.6.1.4.1.6296.101.1.16.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleParameterControlTimer 1.3.6.1.4.1.6296.101.1.16.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleParameterControlTimeStamp 1.3.6.1.4.1.6296.101.1.16.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleParameterControlReqResult 1.3.6.1.4.1.6296.101.1.16.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleParameterControlName 1.3.6.1.4.1.6296.101.1.16.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

sleParameterControlValue 1.3.6.1.4.1.6296.101.1.16.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

sleParameterControlMode 1.3.6.1.4.1.6296.101.1.16.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dynamic(1), static(2)  

sleParameterNotification 1.3.6.1.4.1.6296.101.1.16.3
OBJECT IDENTIFIER    

sleParameterCreated 1.3.6.1.4.1.6296.101.1.16.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleParameterDestroyed 1.3.6.1.4.1.6296.101.1.16.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleParameterModeChanged 1.3.6.1.4.1.6296.101.1.16.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleParameterValueChanged 1.3.6.1.4.1.6296.101.1.16.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSwWatchdogBase 1.3.6.1.4.1.6296.101.1.17
OBJECT IDENTIFIER    

sleSwWatchdogTable 1.3.6.1.4.1.6296.101.1.17.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleSwWatchdogEntry

sleSwWatchdogEntry 1.3.6.1.4.1.6296.101.1.17.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleSwWatchdogEntry  

sleSwWatchdogType 1.3.6.1.4.1.6296.101.1.17.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER daemonMonitoring(1), inetMonitoring(2), ponMonitoring(3)  

sleSwWatchdogInterval 1.3.6.1.4.1.6296.101.1.17.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 10..86400  

sleSwWatchdogThreshold 1.3.6.1.4.1.6296.101.1.17.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

sleSwWatchdogAction 1.3.6.1.4.1.6296.101.1.17.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), daemonRestart(2), systemReset(3), systemResetWithSaveCfg(4), onuPortReset(5)  

sleSwWatchdogErrcnt 1.3.6.1.4.1.6296.101.1.17.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleSwWatchdogControl 1.3.6.1.4.1.6296.101.1.17.2
OBJECT IDENTIFIER    

sleSwWatchdogControlRequest 1.3.6.1.4.1.6296.101.1.17.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createSwwatchdog(1), deleteSwwatchdog(2)  

sleSwWatchdogControlStatus 1.3.6.1.4.1.6296.101.1.17.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleSwWatchdogControlTimer 1.3.6.1.4.1.6296.101.1.17.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleSwWatchdogControlTimeStamp 1.3.6.1.4.1.6296.101.1.17.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleSwWatchdogControlReqResult 1.3.6.1.4.1.6296.101.1.17.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleSwWatchdogControlType 1.3.6.1.4.1.6296.101.1.17.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER daemonMonitoring(1), inetMonitoring(2), ponMonitoring(3)  

sleSwWatchdogControlInterval 1.3.6.1.4.1.6296.101.1.17.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 10..86400  

sleSwWatchdogControlThreshold 1.3.6.1.4.1.6296.101.1.17.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

sleSwWatchdogControlAction 1.3.6.1.4.1.6296.101.1.17.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), daemonRestart(2), systemReset(3), systemResetWithSaveCfg(4), onuPortReset(5)  

sleSwWatchdogNotification 1.3.6.1.4.1.6296.101.1.17.3
OBJECT IDENTIFIER    

sleSwWatchdogCreated 1.3.6.1.4.1.6296.101.1.17.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSwWatchdogDeleted 1.3.6.1.4.1.6296.101.1.17.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgrade 1.3.6.1.4.1.6296.101.1.18
OBJECT IDENTIFIER    

sleAutoUpgradeProfile 1.3.6.1.4.1.6296.101.1.18.1
OBJECT IDENTIFIER    

sleAutoUpgradeProfileTable 1.3.6.1.4.1.6296.101.1.18.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAutoUpgradeProfileEntry

sleAutoUpgradeProfileEntry 1.3.6.1.4.1.6296.101.1.18.1.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAutoUpgradeProfileEntry  

sleAutoUpgradeProfileIndex 1.3.6.1.4.1.6296.101.1.18.1.1.1.1
The auto upgrade profile index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleAutoUpgradeProfileName 1.3.6.1.4.1.6296.101.1.18.1.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileOldVer 1.3.6.1.4.1.6296.101.1.18.1.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileNewVer 1.3.6.1.4.1.6296.101.1.18.1.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileSize 1.3.6.1.4.1.6296.101.1.18.1.1.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoUpgradeProfilePeriodType 1.3.6.1.4.1.6296.101.1.18.1.1.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), daily(2), weekly(3), monthly(4), interval(5), once(6)  

sleAutoUpgradeProfileDate 1.3.6.1.4.1.6296.101.1.18.1.1.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfilePeriodDate 1.3.6.1.4.1.6296.101.1.18.1.1.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileTimeout 1.3.6.1.4.1.6296.101.1.18.1.1.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoUpgradeProfileRetry 1.3.6.1.4.1.6296.101.1.18.1.1.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1 | 1..2147483647  

sleAutoUpgradeProfileRegSec 1.3.6.1.4.1.6296.101.1.18.1.1.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleAutoUpgradeProfileReloadTime 1.3.6.1.4.1.6296.101.1.18.1.1.1.12
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileModel 1.3.6.1.4.1.6296.101.1.18.1.1.1.13
The Model Name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileControl 1.3.6.1.4.1.6296.101.1.18.1.2
OBJECT IDENTIFIER    

sleAutoUpgradeProfileControlRequest 1.3.6.1.4.1.6296.101.1.18.1.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createAutoUpgrdProfile(1), destroyAutoUpgrdProfile(2), modifyAutoUpgrdProfile(3)  

sleAutoUpgradeProfileControlStatus 1.3.6.1.4.1.6296.101.1.18.1.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoUpgradeProfileControlTimer 1.3.6.1.4.1.6296.101.1.18.1.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoUpgradeProfileControlTimeStamp 1.3.6.1.4.1.6296.101.1.18.1.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoUpgradeProfileControlReqResult 1.3.6.1.4.1.6296.101.1.18.1.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoUpgradeProfileControlName 1.3.6.1.4.1.6296.101.1.18.1.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileControlOldVer 1.3.6.1.4.1.6296.101.1.18.1.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileControlNewVer 1.3.6.1.4.1.6296.101.1.18.1.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileControlSize 1.3.6.1.4.1.6296.101.1.18.1.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoUpgradeProfileControlPeriodType 1.3.6.1.4.1.6296.101.1.18.1.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), daily(2), weekly(3), monthly(4), interval(5), once(6)  

sleAutoUpgradeProfileControlDate 1.3.6.1.4.1.6296.101.1.18.1.2.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileControlPeriodDate 1.3.6.1.4.1.6296.101.1.18.1.2.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileControlTimeout 1.3.6.1.4.1.6296.101.1.18.1.2.13
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoUpgradeProfileControlRetry 1.3.6.1.4.1.6296.101.1.18.1.2.14
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..2147483647  

sleAutoUpgradeProfileControlRegSec 1.3.6.1.4.1.6296.101.1.18.1.2.15
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleAutoUpgradeProfileControlReloadTime 1.3.6.1.4.1.6296.101.1.18.1.2.16
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileControlModel 1.3.6.1.4.1.6296.101.1.18.1.2.17
The Model Name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeProfileNotification 1.3.6.1.4.1.6296.101.1.18.1.3
OBJECT IDENTIFIER    

sleAutoUpgradeProfileCreated 1.3.6.1.4.1.6296.101.1.18.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeProfileDeleted 1.3.6.1.4.1.6296.101.1.18.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeProfileChanged 1.3.6.1.4.1.6296.101.1.18.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeMgmt 1.3.6.1.4.1.6296.101.1.18.2
OBJECT IDENTIFIER    

sleAutoUpgradeOltTable 1.3.6.1.4.1.6296.101.1.18.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAutoUpgradeOltEntry

sleAutoUpgradeOltEntry 1.3.6.1.4.1.6296.101.1.18.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAutoUpgradeOltEntry  

sleAutoUpgradeOltSlotIndex 1.3.6.1.4.1.6296.101.1.18.2.1.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..64  

sleAutoUpgradeOltFwType 1.3.6.1.4.1.6296.101.1.18.2.1.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER os(1), bootloader(2)  

sleAutoUpgradeOltProfileName 1.3.6.1.4.1.6296.101.1.18.2.1.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeOltSlotType 1.3.6.1.4.1.6296.101.1.18.2.1.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sfu(1), siuge12(2), siuepon12(3), siugpon4(4), niuge12(5)  

sleAutoUpgradeOntTable 1.3.6.1.4.1.6296.101.1.18.2.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleAutoUpgradeOntEntry

sleAutoUpgradeOntEntry 1.3.6.1.4.1.6296.101.1.18.2.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleAutoUpgradeOntEntry  

sleAutoUpgradeOntOltIndex 1.3.6.1.4.1.6296.101.1.18.2.2.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..64  

sleAutoUpgradeOntIndex 1.3.6.1.4.1.6296.101.1.18.2.2.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..64  

sleAutoUpgradeOntFwType 1.3.6.1.4.1.6296.101.1.18.2.2.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER os(1), bootloader(2)  

sleAutoUpgradeOntProfileName 1.3.6.1.4.1.6296.101.1.18.2.2.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeMgmtControl 1.3.6.1.4.1.6296.101.1.18.2.3
OBJECT IDENTIFIER    

sleAutoUpgradeMgmtControlRequest 1.3.6.1.4.1.6296.101.1.18.2.3.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setAutoUpgrdOltProfile(1), unsetAutoUpgrdOltProfile(2), setAutoUpgrdOntProfile(3), unsetAutoUpgrdOntProfile(4)  

sleAutoUpgradeMgmtControlStatus 1.3.6.1.4.1.6296.101.1.18.2.3.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoUpgradeMgmtControlTimer 1.3.6.1.4.1.6296.101.1.18.2.3.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoUpgradeMgmtControlTimeStamp 1.3.6.1.4.1.6296.101.1.18.2.3.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoUpgradeMgmtControlReqResult 1.3.6.1.4.1.6296.101.1.18.2.3.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoUpgradeMgmtControlOltIndex 1.3.6.1.4.1.6296.101.1.18.2.3.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeMgmtControlOntIndex 1.3.6.1.4.1.6296.101.1.18.2.3.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeMgmtControlFwType 1.3.6.1.4.1.6296.101.1.18.2.3.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER os(1), bootloader(2)  

sleAutoUpgradeMgmtControlProfileName 1.3.6.1.4.1.6296.101.1.18.2.3.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeMgmtControlSlotType 1.3.6.1.4.1.6296.101.1.18.2.3.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sfu(1), siuge12(2), siuepon12(3), siugpon4(4), niuge12(5)  

sleAutoUpgradeMgmtNotification 1.3.6.1.4.1.6296.101.1.18.2.4
OBJECT IDENTIFIER    

sleAutoUpgradeSetOltProfile 1.3.6.1.4.1.6296.101.1.18.2.4.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeUnSetOltProfile 1.3.6.1.4.1.6296.101.1.18.2.4.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeSetOntProfile 1.3.6.1.4.1.6296.101.1.18.2.4.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeUnSetOntProfile 1.3.6.1.4.1.6296.101.1.18.2.4.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeLog 1.3.6.1.4.1.6296.101.1.18.3
OBJECT IDENTIFIER    

sleAutoUpgradeLogInfo 1.3.6.1.4.1.6296.101.1.18.3.1
OBJECT IDENTIFIER    

sleAutoUpgradeLogControl 1.3.6.1.4.1.6296.101.1.18.3.2
OBJECT IDENTIFIER    

sleAutoUpgradeLogControlRequest 1.3.6.1.4.1.6296.101.1.18.3.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER delAutoUpgradeOltLog(1), delAutoUpgradeOltLogAll(2), delAutoUpgradeOntLog(3), delAutoUpgradeOntLogAll(4), exportAutoUpgradeOltLog(5), exportAutoUpgradeOntLog(6)  

sleAutoUpgradeLogControlStatus 1.3.6.1.4.1.6296.101.1.18.3.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleAutoUpgradeLogControlTimer 1.3.6.1.4.1.6296.101.1.18.3.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleAutoUpgradeLogControlTimeStamp 1.3.6.1.4.1.6296.101.1.18.3.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleAutoUpgradeLogControlReqResult 1.3.6.1.4.1.6296.101.1.18.3.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleAutoUpgradeLogControlSlotIndex 1.3.6.1.4.1.6296.101.1.18.3.2.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeLogControlOntIndex 1.3.6.1.4.1.6296.101.1.18.3.2.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeLogControlExportMethod 1.3.6.1.4.1.6296.101.1.18.3.2.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ftp(1), tftp(2)  

sleAutoUpgradeLogControlServer 1.3.6.1.4.1.6296.101.1.18.3.2.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleAutoUpgradeLogControlUser 1.3.6.1.4.1.6296.101.1.18.3.2.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeLogControlPasswd 1.3.6.1.4.1.6296.101.1.18.3.2.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleAutoUpgradeLogNotification 1.3.6.1.4.1.6296.101.1.18.3.3
OBJECT IDENTIFIER    

sleAutoUpgradeDeleteOltLog 1.3.6.1.4.1.6296.101.1.18.3.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeDeleteAllOltLog 1.3.6.1.4.1.6296.101.1.18.3.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeDeleteOntLog 1.3.6.1.4.1.6296.101.1.18.3.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeDeleteAllOntLog 1.3.6.1.4.1.6296.101.1.18.3.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeExportOltLog 1.3.6.1.4.1.6296.101.1.18.3.3.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleAutoUpgradeExportOntLog 1.3.6.1.4.1.6296.101.1.18.3.3.6
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleWatchdog 1.3.6.1.4.1.6296.101.1.19
OBJECT IDENTIFIER    

sleWatchdogInfo 1.3.6.1.4.1.6296.101.1.19.1
OBJECT IDENTIFIER    

sleWatchdogAdminStatus 1.3.6.1.4.1.6296.101.1.19.1.1
The status of system watchdog
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleWatchdogTimeout 1.3.6.1.4.1.6296.101.1.19.1.2
The timeout of system watchdog (unit: sec)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleWatchdogMode 1.3.6.1.4.1.6296.101.1.19.1.3
The trriger mode of system watchdog
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER top(1), timer(2), thread(3)  

sleWatchdogControl 1.3.6.1.4.1.6296.101.1.19.2
OBJECT IDENTIFIER    

sleWatchdogControlRequest 1.3.6.1.4.1.6296.101.1.19.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setWatchdogStatus(1), setWatchdogTimeout(2), setWatchdogMode(3)  

sleWatchdogControlStatus 1.3.6.1.4.1.6296.101.1.19.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleWatchdogControlTimer 1.3.6.1.4.1.6296.101.1.19.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleWatchdogControlTimeStamp 1.3.6.1.4.1.6296.101.1.19.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleWatchdogControlReqResult 1.3.6.1.4.1.6296.101.1.19.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleWatchdogControlAdminStatus 1.3.6.1.4.1.6296.101.1.19.2.6
The status of system watchdog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleWatchdogControlTimeout 1.3.6.1.4.1.6296.101.1.19.2.7
The timeout of system watchdog (unit: sec)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleWatchdogControlMode 1.3.6.1.4.1.6296.101.1.19.2.8
The trriger mode of system watchdog
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER top(1), timer(2), thread(3)  

sleWatchdogNotification 1.3.6.1.4.1.6296.101.1.19.3
OBJECT IDENTIFIER    

sleWatchdogAdminStatusChanged 1.3.6.1.4.1.6296.101.1.19.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleWatchdogTimeoutChanged 1.3.6.1.4.1.6296.101.1.19.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleWatchdogModeChanged 1.3.6.1.4.1.6296.101.1.19.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleFtpclient 1.3.6.1.4.1.6296.101.1.100
OBJECT IDENTIFIER    

sleFtpclientTable 1.3.6.1.4.1.6296.101.1.100.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleFtpclientEntry

sleFtpclientEntry 1.3.6.1.4.1.6296.101.1.100.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleFtpclientEntry  

sleFtpclientIndex 1.3.6.1.4.1.6296.101.1.100.1.1.1
index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleFtpclientFileName 1.3.6.1.4.1.6296.101.1.100.1.1.2
The File name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleFtpclientFileSize 1.3.6.1.4.1.6296.101.1.100.1.1.3
The File size.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleFtpclientControl 1.3.6.1.4.1.6296.101.1.100.2
OBJECT IDENTIFIER    

sleFtpclientControlRequest 1.3.6.1.4.1.6296.101.1.100.2.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER updateDirectoryInfo(1)  

sleFtpclientControlStatus 1.3.6.1.4.1.6296.101.1.100.2.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleFtpclientControlTimer 1.3.6.1.4.1.6296.101.1.100.2.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleFtpclientControlTimeStamp 1.3.6.1.4.1.6296.101.1.100.2.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleFtpclientControlReqResult 1.3.6.1.4.1.6296.101.1.100.2.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleFtpclientControlServerIp 1.3.6.1.4.1.6296.101.1.100.2.6
The server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleFtpclientControlUserId 1.3.6.1.4.1.6296.101.1.100.2.7
The user ID.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleFtpclientControlPassword 1.3.6.1.4.1.6296.101.1.100.2.8
The password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleFtpclientControlDirectoryPath 1.3.6.1.4.1.6296.101.1.100.2.9
The directory path.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleFtpclientNotification 1.3.6.1.4.1.6296.101.1.100.3
OBJECT IDENTIFIER    

sleFtpclientDirectoryInfoUpdated 1.3.6.1.4.1.6296.101.1.100.3.1
UpdateDirectoryInfo
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSystemMaintenanceGroup 1.3.6.1.4.1.6296.101.1.101
Description.
Status: current Access: read-write
OBJECT-GROUP    

sleSystemMaintenanceNotificationGroup 1.3.6.1.4.1.6296.101.1.102
Description.
Status: current Access: read-write
NOTIFICATION-GROUP