SLEV2-Security-MIB

File: SLEV2-Security-MIB.mib (155269 bytes)

Imported modules

DASAN-SMI INET-ADDRESS-MIB SLE-TC-MIB
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC

Imported symbols

sleV2Mgmt InetAddressType InetAddress
InetAddressPrefixLength SleControlStatusType SleControlRequestResultType
OBJECT-GROUP NOTIFICATION-GROUP TimeTicks
IpAddress Integer32 Gauge32
Counter32 Counter64 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE TimeStamp
TEXTUAL-CONVENTION

Defined Types

IntFlowIndex  
INTEGER 1..1024    

IntClassIndex  
INTEGER 1..1024    

IntPolicyIndex  
INTEGER 1..1024    

OctetName  
OCTET STRING Size(1..64)    

IntIpAddrMask  
INTEGER 0..32    

IntProtocolType  
INTEGER -1 | 0..255    

IntL4Port  
INTEGER -1 | 0..65535    

IntIcmpType  
INTEGER -1 | 0..255    

IntIcmpCode  
INTEGER -1 | 0..255    

IntInternetProtocolFlag  
INTEGER nothing(-1), tcp(1), ucp(2), icmp(3)    

IntRulePriority  
INTEGER nothing(-1), low(1), medium(2), high(3), highest(4)    

IntFlowClass  
INTEGER nothing(-1), flow(1), class(2), both(4)    

IntInterfaceIndex  
INTEGER -1 | 1..512    

IntFlowOrClass  
INTEGER flow(1), class(2)    

IntPermit  
INTEGER deny(1), permit(2), none(3)    

MacAddressMask  
Represents Mac address Mask.
TEXTUAL-CONVENTION    
  OCTET STRING Size(6)  

SleV2Security4ACLFlowEntry  
SEQUENCE    
  sleV2Security4ACLFlowIndex INTEGER
  sleV2Security4ACLFlowName OctetName
  sleV2Security4ACLFlowSrcIpAddr IpAddress
  sleV2Security4ACLFlowSrcIpAddrMask IntIpAddrMask
  sleV2Security4ACLFlowDstIpAddr IpAddress
  sleV2Security4ACLFlowDstIpAddrMask IntIpAddrMask
  sleV2Security4ACLFlowProtocolType IntProtocolType
  sleV2Security4ACLFlowTcpSrcStartPort IntL4Port
  sleV2Security4ACLFlowTcpSrcEndPort IntL4Port
  sleV2Security4ACLFlowTcpDstStartPort IntL4Port
  sleV2Security4ACLFlowTcpDstEndPort IntL4Port
  sleV2Security4ACLFlowTcpFlag BITS
  sleV2Security4ACLFlowUdpSrcStartPort IntL4Port
  sleV2Security4ACLFlowUdpSrcEndPort IntL4Port
  sleV2Security4ACLFlowUdpDstStartPort IntL4Port
  sleV2Security4ACLFlowUdpDstEndPort IntL4Port
  sleV2Security4ACLFlowIcmpType IntIcmpType
  sleV2Security4ACLFlowIcmpCode IntIcmpCode
  sleV2Security4ACLFlowHdrlen INTEGER
  sleV2Security4ACLFlowIpFlag INTEGER
  sleV2SecurityACLFlowInetAddrType InetAddressType
  sleV2SecurityACLFlowSrcInetAddr InetAddress
  sleV2SecurityACLFlowDstInetAddr InetAddress
  sleV2SecurityACLFlowSrcInetAddrLen InetAddressPrefixLength
  sleV2SecurityACLFlowDstInetAddrLen InetAddressPrefixLength

SleV2Security4ACLFlowClassEntry  
SEQUENCE    
  sleV2Security4ACLFlowClassIndex IntClassIndex
  sleV2Security4ACLFlowClassID IntClassIndex
  sleV2Security4ACLFlowClassName OctetName

SleV2QoS4ACLFlowPolicyEntry  
SEQUENCE    
  sleV2Security4ACLFlowPolicyIndex IntPolicyIndex
  sleV2Security4ACLFlowPolicyID IntPolicyIndex
  sleV2Security4ACLFlowPolicyName OctetName

SleV2Security4ACLClassEntry  
SEQUENCE    
  sleV2Security4ACLClassIndex IntClassIndex
  sleV2Security4ACLClassName OctetName
  sleV2Security4ACLClassFlowCnt Counter32

SleV2Security4ACLClassFlowEntry  
SEQUENCE    
  sleV2Security4ACLClassFlowIndex IntFlowIndex
  sleV2Security4ACLClassFlowID IntFlowIndex
  sleV2Security4ACLClassFlowName OctetName
  sleV2Security4ACLClassFlowClassName OctetName

SleV2Security4ACLClassPolicyEntry  
SEQUENCE    
  sleV2Security4ACLClassPolicyIndex IntPolicyIndex
  sleV2Security4ACLClassPolicyID IntPolicyIndex
  sleV2Security4ACLClassPolicyName OctetName

SleV2Security4ACLPolicyEntry  
SEQUENCE    
  sleV2Security4ACLPolicyIndex IntPolicyIndex
  sleV2Security4ACLPolicyName OctetName
  sleV2Security4ACLPolicyFlowCnt Integer32
  sleV2Security4ACLPolicyClassCnt Integer32
  sleV2Security4ACLPolicyPriority INTEGER
  sleV2Security4ACLPolicyMatchFlag IntPermit
  sleV2Security4ACLPolicyNomatchFlag IntPermit

SleV2Security4ACLPolicyFlowClassEntry  
SEQUENCE    
  sleV2Security4ACLPolicyFlowClassIndex IntFlowIndex
  sleV2Security4ACLPolicyFlowClassType IntFlowOrClass
  sleV2Security4ACLPolicyFlowClassID IntFlowIndex
  sleV2Security4ACLPolicyFlowClassName OctetName

SleV2Security4ACLGroupIfEntry  
SEQUENCE    
  sleV2Security4ACLGroupIfindex Integer32
  sleV2Security4ACLGroupIfType INTEGER
  sleV2Security4ACLGroupIfName OCTET STRING
  sleV2Security4ACLGroupIfPriority INTEGER

SleV2SecuritySACLEntry  
SEQUENCE    
  sleV2SecuritySACLName OctetName
  sleV2SecuritySACLSrcIpaddr IpAddress
  sleV2SecuritySACLSrcPrefixLength Integer32
  sleV2SecuritySACLDstIpAddr IpAddress
  sleV2SecuritySACLDstPrefixLength Integer32
  sleV2SecuritySACLProtocolType IntProtocolType
  sleV2SecuritySACLTcpflag BITS
  sleV2SecuritySACLSrcL4Port IntL4Port
  sleV2SecuritySACLDstL4Port IntL4Port
  sleV2SecuritySACLIcmpType IntProtocolType
  sleV2SecuritySACLIcmpCode IntProtocolType
  sleV2SecuritySACLPriority INTEGER
  sleV2SecuritySACLMatchAction INTEGER
  sleV2SecuritySACLNomatchAction INTEGER

SleV2SecurityACLPacketCountEntry  
SEQUENCE    
  sleV2SecurityACLTotalPacket Counter64

SleV2SecurityACLSrcHistoryEntry  
SEQUENCE    
  sleV2SecurityACLSrcHistoryIndex Integer32
  sleV2SecurityACLSrcHistoryIpAddr IpAddress

SleV2CpuPacketFilterEntry  
SEQUENCE    
  sleV2CpuPacketFilterIndex Integer32
  sleV2CpuPacketFilterName OCTET STRING
  sleV2CpuPacketFilterCreationTime Counter32
  sleV2CpuPacketFilterElapsedtimeAfterClear Counter32
  sleV2CpuPacketFilterStage INTEGER
  sleV2CpuPacketFilterPriority Integer32
  sleV2CpuPacketFilterAction INTEGER
  sleV2CpuPacketFilterActionRateLimit Integer32
  sleV2CpuPacketFilterActionBurstSize Integer32
  sleV2CpuPacketFilterActionTpid Integer32
  sleV2CpuPacketFilterActionPcp Integer32
  sleV2CpuPacketFilterActionVid Integer32
  sleV2CpuPacketFilterActionTagPosition Integer32

SleV2CpuPacketFilterMatchEntry  
SEQUENCE    
  sleV2CpuPacketFilterMatchIndex Integer32
  sleV2CpuPacketFilterMatchType BITS
  sleV2CpuPacketFilterMatchCos OCTET STRING
  sleV2CpuPacketFilterMatchPort OCTET STRING
  sleV2CpuPacketFilterMatchVidmap OCTET STRING
  sleV2CpuPacketFilterMatchTagPosition Integer32
  sleV2CpuPacketFilterMatchTpid Integer32
  sleV2CpuPacketFilterMatchPcp Integer32
  sleV2CpuPacketFilterMatchVid Integer32
  sleV2CpuPacketFilterMatchOffset Integer32
  sleV2CpuPacketFilterMatchLength Integer32
  sleV2CpuPacketFilterMatchData OCTET STRING
  sleV2CpuPacketFilterMatchMask OCTET STRING
  sleV2CpuPacketFilterMatchDesc OCTET STRING

SleV2VlanOperationEntry  
SEQUENCE    
  sleV2VlanOperationIndex Integer32
  sleV2VlanOperationName OCTET STRING
  sleV2VlanOperationStage INTEGER
  sleV2VlanOperationProiroty Integer32
  sleV2VlanOperationPort OCTET STRING
  sleV2VlanOperationOuterVlan OCTET STRING
  sleV2VlanOperationInnerVlan OCTET STRING
  sleV2VlanOperationEtherType Integer32
  sleV2VlanOperationIpProtocol Integer32
  sleV2VlanOperationArpSip OCTET STRING
  sleV2VlanOperationArpSipPfxLen Integer32
  sleV2VlanOperationSip OCTET STRING
  sleV2VlanOperationSipPfxLen Integer32
  sleV2VlanOperationDip OCTET STRING
  sleV2VlanOperationDipPfxLen Integer32
  sleV2VlanOperationAction INTEGER
  sleV2VlanOperationActionVid Integer32

SleV2EthernetServiceEntry  
SEQUENCE    
  sleV2EthernetServiceSid INTEGER
  sleV2EthernetServiceType INTEGER
  sleV2EthernetServiceRtCustomerPort OCTET STRING
  sleV2EthernetServiceRtCustomerVid OCTET STRING
  sleV2EthernetServiceRtNetworkPort OCTET STRING
  sleV2EthernetServiceRtNetworkVid OCTET STRING
  sleV2EthernetServiceRtEnableManagement INTEGER
  sleV2EthernetServiceCotExternalPort OCTET STRING
  sleV2EthernetServiceCotExternalVid OCTET STRING
  sleV2EthernetServiceCotInternalPort OCTET STRING
  sleV2EthernetServiceCotInternalVid OCTET STRING

Defined Values

sleV2Security 1.3.6.1.4.1.6296.102.7
slev2 security
MODULE-IDENTITY    

sleV2SecurityBase 1.3.6.1.4.1.6296.102.7.1
OBJECT IDENTIFIER    

sleVSecurity4 1.3.6.1.4.1.6296.102.7.2
OBJECT IDENTIFIER    

sleV2SecurityACL 1.3.6.1.4.1.6296.102.7.2.5
OBJECT IDENTIFIER    

sleV2Security4ACLBase 1.3.6.1.4.1.6296.102.7.2.5.1
OBJECT IDENTIFIER    

sleV2Security4ACLFlow 1.3.6.1.4.1.6296.102.7.2.5.2
OBJECT IDENTIFIER    

sleV2Security4ACLFlowInfo 1.3.6.1.4.1.6296.102.7.2.5.2.1
OBJECT IDENTIFIER    

sleV2Security4ACLFlowTable 1.3.6.1.4.1.6296.102.7.2.5.2.1.1
ACL flow table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2Security4ACLFlowEntry

sleV2Security4ACLFlowEntry 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1
key: sleV2Security4ACLFlowIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2Security4ACLFlowEntry  

sleV2Security4ACLFlowIndex 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.1
The index of flow
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

sleV2Security4ACLFlowName 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.2
The name of flow
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLFlowSrcIpAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.3
The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleV2Security4ACLFlowSrcIpAddrMask 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.4
The mask of source IP address The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntIpAddrMask  

sleV2Security4ACLFlowDstIpAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.5
The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleV2Security4ACLFlowDstIpAddrMask 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.6
The mask of destination IP address The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntIpAddrMask  

sleV2Security4ACLFlowProtocolType 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.7
The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowUdpSrcStartPort to sleV2QoS4FlowUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowIcmpType and sleV2QoS4FlowIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode value is not available The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntProtocolType  

sleV2Security4ACLFlowTcpSrcStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.8
The start source port in range of source port in TCP packet The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowTcpSrcEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.9
The end source port in range of source port in TCP packet The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowTcpDstStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.10
The start destination port in range of source port in TCP packet. The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowTcpDstEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.11
The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowTcpFlag 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.12
The flag in TCP packet
Status: current Access: read-only
OBJECT-TYPE    
  BITS reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)  

sleV2Security4ACLFlowUdpSrcStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.13
The start source port in range of source port in UDP packet The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowUdpSrcEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.14
The end source port in range of source port in UDP packet The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowUdpDstStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.15
The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowUdpDstEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.16
The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowIcmpType 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.17
The type of ICMP message The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntIcmpType  

sleV2Security4ACLFlowIcmpCode 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.18
The code of ICMP message The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntIcmpCode  

sleV2Security4ACLFlowHdrlen 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.19
The IP header length. The value of 0 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0 | 1..15  

sleV2Security4ACLFlowIpFlag 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.20
The any flag of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), srcAny(1), dstAny(2), srcDstAny(3)  

sleV2SecurityACLFlowInetAddrType 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.21
IP address type
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

sleV2SecurityACLFlowSrcInetAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.22
The IP address to match against the packet's source IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

sleV2SecurityACLFlowDstInetAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.23
The IP address to match against the packet's destination IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

sleV2SecurityACLFlowSrcInetAddrLen 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.24
The prefix length of source IP address
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressPrefixLength  

sleV2SecurityACLFlowDstInetAddrLen 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.25
The prefix length of destination IP address
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressPrefixLength  

sleV2Security4ACLFlowControl 1.3.6.1.4.1.6296.102.7.2.5.2.1.2
OBJECT IDENTIFIER    

sleV2Security4ACLFlowControlRequest 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createFlow(1), modifyFlow(2), destroyFlow(3), destroyAllFlow(4), createFlowEx(5), setFlowEx(6)  

sleV2Security4ACLFlowControlStatus 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2Security4ACLFlowControlTimer 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2Security4ACLFlowControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleV2Security4ACLFlowControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2Security4ACLFlowControlIndex 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.6
The index of flow
Status: current Access: read-write
OBJECT-TYPE    
  IntFlowIndex  

sleV2Security4ACLFlowControlName 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.7
The name of flow
Status: current Access: read-write
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLFlowControlSrcIpAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.8
The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleV2Security4ACLFlowControlSrcIpAddrMask 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.9
The mask of source IP address The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntIpAddrMask  

sleV2Security4ACLFlowControlDstIpAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.10
The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleV2Security4ACLFlowControlDstIpAddrMask 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.11
The mask of destination IP address The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntIpAddrMask  

sleV2Security4ACLFlowControlProtocolType 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.12
The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlTcpFlag value is available If the value is udp(17), From sleV2QoS4FlowControlUdpSrcStartPort to sleV2QoS4FlowControlUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowControlIcmpType and sleV2QoS4FlowControlIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlIcmpCode value is not available The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntProtocolType  

sleV2Security4ACLFlowControlTcpSrcStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.13
The start source port in range of source port in TCP packet The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowControlTcpSrcEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.14
The end source port in range of source port in TCP packet The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowControlTcpDstStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.15
The start destination port in range of source port in TCP packet. The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowControlTcpDstEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.16
The end destination port in range of destination port in TCP packet. The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowControlTcpFlag 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.17
The flag in TCP packet
Status: current Access: read-write
OBJECT-TYPE    
  BITS reserv0(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)  

sleV2Security4ACLFlowControlUdpSrcStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.18
The start source port in range of source port in UDP packet The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowControlUdpSrcEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.19
The end source port in range of source port in UDP packet The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowControlUdpDstStartPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.20
The start destination port in range of destination port in UDP packet. The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowControlUdpDstEndPort 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.21
The end destination port in range of destination port in UDP packet. The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2Security4ACLFlowControlIcmpType 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.22
The type of ICMP message The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntIcmpType  

sleV2Security4ACLFlowControlIcmpCode 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.23
The code of ICMP message The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntIcmpCode  

sleV2Security4ACLFlowControlHdrlen 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.24
The IP header length The value of 0 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1..15  

sleV2Security4ACLFlowControlIpFlag 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.25
The any flag of IP address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), srcAny(1), dstAny(2), srcDstAny(3)  

sleV2SecurityACLFlowControlInetAddrType 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.26
IP address type
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sleV2SecurityACLFlowControlSrcInetAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.27
The IP address to match against the packet's source IP address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleV2SecurityACLFlowControlDstInetAddr 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.28
The IP address to match against the packet's destination IP address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sleV2SecurityACLFlowControlSrcInetAddrLen 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.29
The prefix length of source IP address
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressPrefixLength  

sleV2SecurityACLFlowControlDstInetAddrLen 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.30
The prefix length of destination IP address
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressPrefixLength  

sleV2Security4ACLFlowNotification 1.3.6.1.4.1.6296.102.7.2.5.2.1.3
OBJECT IDENTIFIER    

sleACLFlowCreated 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLFlowChanged 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLFlowDestroyed 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLFlowAllDestroyed 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLFlowExCreated 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.5
createACLFlowEx
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLFlowExChanged 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.6
setACLFlowEx
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2Security4ACLFlowClass 1.3.6.1.4.1.6296.102.7.2.5.2.2
OBJECT IDENTIFIER    

sleV2Security4ACLFlowClassTable 1.3.6.1.4.1.6296.102.7.2.5.2.2.1
ACL flow class table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2Security4ACLFlowClassEntry

sleV2Security4ACLFlowClassEntry 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1
key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowClassIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2Security4ACLFlowClassEntry  

sleV2Security4ACLFlowClassIndex 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.1
The index of the class for the flow
Status: current Access: read-only
OBJECT-TYPE    
  IntClassIndex  

sleV2Security4ACLFlowClassID 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.2
The identifier of the class
Status: current Access: read-only
OBJECT-TYPE    
  IntClassIndex  

sleV2Security4ACLFlowClassName 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.3
The name of the class
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLFlowPolicy 1.3.6.1.4.1.6296.102.7.2.5.2.3
OBJECT IDENTIFIER    

sleV2QoS4ACLFlowPolicyTable 1.3.6.1.4.1.6296.102.7.2.5.2.3.1
ACL flow policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2QoS4ACLFlowPolicyEntry

sleV2QoS4ACLFlowPolicyEntry 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1
key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowPolicyIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2QoS4ACLFlowPolicyEntry  

sleV2Security4ACLFlowPolicyIndex 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.1
The index of the policy for the flow
Status: current Access: read-only
OBJECT-TYPE    
  IntPolicyIndex  

sleV2Security4ACLFlowPolicyID 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.2
The identifier of the policy
Status: current Access: read-only
OBJECT-TYPE    
  IntPolicyIndex  

sleV2Security4ACLFlowPolicyName 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.3
The name of the policy
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLClass 1.3.6.1.4.1.6296.102.7.2.5.3
OBJECT IDENTIFIER    

sleV2Security4ACLClassInfo 1.3.6.1.4.1.6296.102.7.2.5.3.1
OBJECT IDENTIFIER    

sleV2Security4ACLClassTable 1.3.6.1.4.1.6296.102.7.2.5.3.1.1
ACL class table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2Security4ACLClassEntry

sleV2Security4ACLClassEntry 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1
key: sleV2Security4ACLClassIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2Security4ACLClassEntry  

sleV2Security4ACLClassIndex 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.1
The index of class
Status: current Access: read-only
OBJECT-TYPE    
  IntClassIndex  

sleV2Security4ACLClassName 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.2
The name of class
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLClassFlowCnt 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.3
The counter of flow in class
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleV2Security4ACLClassControl 1.3.6.1.4.1.6296.102.7.2.5.3.1.2
OBJECT IDENTIFIER    

sleV2Security4ACLClassControlRequest 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createClass(1), destroyClass(2), destroyAllClass(3)  

sleV2Security4ACLClassControlStatus 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2Security4ACLClassControlTimer 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2Security4ACLClassControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleV2Security4ACLClassControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2Security4ACLClassControlIndex 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.6
The index of class
Status: current Access: read-write
OBJECT-TYPE    
  IntClassIndex  

sleV2Security4ACLClassControlName 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.7
The name of class
Status: current Access: read-write
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLClassNotification 1.3.6.1.4.1.6296.102.7.2.5.3.1.3
OBJECT IDENTIFIER    

sleACLClassCreated 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLClassDestroyed 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLClassAllDestroyed 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2Security4ACLClassFlow 1.3.6.1.4.1.6296.102.7.2.5.3.2
OBJECT IDENTIFIER    

sleV2Security4ACLClassFlowTable 1.3.6.1.4.1.6296.102.7.2.5.3.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2Security4ACLClassFlowEntry

sleV2Security4ACLClassFlowEntry 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2Security4ACLClassFlowEntry  

sleV2Security4ACLClassFlowIndex 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.1
The index of flow in class
Status: current Access: read-only
OBJECT-TYPE    
  IntFlowIndex  

sleV2Security4ACLClassFlowID 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.2
The identifier of flow
Status: current Access: read-only
OBJECT-TYPE    
  IntFlowIndex  

sleV2Security4ACLClassFlowName 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.3
The name of the flow
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLClassFlowClassName 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.4
The class name of the Classflow
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLClassFlowControl 1.3.6.1.4.1.6296.102.7.2.5.3.2.2
OBJECT IDENTIFIER    

sleV2Security4ACLClassFlowControlRequest 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER addFlow(1), deleteFlow(2), deleteAllFlow(3)  

sleV2Security4ACLClassFlowControlStatus 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2Security4ACLClassFlowControlTimer 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2Security4ACLClassFlowControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleV2Security4ACLClassFlowControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2Security4ACLClassFlowControlClassIndex 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.6
The index of class
Status: current Access: read-write
OBJECT-TYPE    
  IntClassIndex  

sleV2Security4ACLClassFlowControlFlowIndex 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.7
The index of flow in this class
Status: current Access: read-write
OBJECT-TYPE    
  IntFlowIndex  

sleV2Security4ACLClassFlowControlFlowID 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.8
The index of flow Refer to sleV2QoS4FlowIndex
Status: current Access: read-write
OBJECT-TYPE    
  IntFlowIndex  

sleV2Security4ACLClassFlowControlClassName 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.9
The class name of classFlow
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2Security4ACLClassFlowNotification 1.3.6.1.4.1.6296.102.7.2.5.3.2.3
OBJECT IDENTIFIER    

sleACLClassFlowAdded 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLClassFlowDeleted 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLClassFlowAllDeleted 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2Security4ACLClassPolicy 1.3.6.1.4.1.6296.102.7.2.5.3.3
OBJECT IDENTIFIER    

sleV2Security4ACLClassPolicyTable 1.3.6.1.4.1.6296.102.7.2.5.3.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2Security4ACLClassPolicyEntry

sleV2Security4ACLClassPolicyEntry 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2Security4ACLClassPolicyEntry  

sleV2Security4ACLClassPolicyIndex 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.1
The index of the policy for the class
Status: current Access: read-only
OBJECT-TYPE    
  IntPolicyIndex  

sleV2Security4ACLClassPolicyID 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.2
The identifier of the policy
Status: current Access: read-only
OBJECT-TYPE    
  IntPolicyIndex  

sleV2Security4ACLClassPolicyName 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.3
The name of the policy
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLPolicy 1.3.6.1.4.1.6296.102.7.2.5.4
OBJECT IDENTIFIER    

sleV2Security4ACLPolicyInfo 1.3.6.1.4.1.6296.102.7.2.5.4.1
OBJECT IDENTIFIER    

sleV2Security4ACLPolicyTable 1.3.6.1.4.1.6296.102.7.2.5.4.1.1
ACL policy table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2Security4ACLPolicyEntry

sleV2Security4ACLPolicyEntry 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1
key: sleV2Security4ACLPolicyIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2Security4ACLPolicyEntry  

sleV2Security4ACLPolicyIndex 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.1
The index of policy
Status: current Access: read-only
OBJECT-TYPE    
  IntPolicyIndex  

sleV2Security4ACLPolicyName 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.2
The name of policy
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLPolicyFlowCnt 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.3
The counter of flow that was included to policy
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleV2Security4ACLPolicyClassCnt 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.4
The counter of class that was included to policy
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleV2Security4ACLPolicyPriority 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.5
The priority of the policy low : default value
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), highest(4)  

sleV2Security4ACLPolicyMatchFlag 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.6
The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
Status: current Access: read-only
OBJECT-TYPE    
  IntPermit  

sleV2Security4ACLPolicyNomatchFlag 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.7
The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
Status: current Access: read-only
OBJECT-TYPE    
  IntPermit  

sleV2Security4ACLPolicyControl 1.3.6.1.4.1.6296.102.7.2.5.4.1.2
OBJECT IDENTIFIER    

sleV2Security4ACLPolicyControlRequest 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createPolicy(1), setPolicyInfo(2), setMatchAction(3), setNomatchAction(4), destroyPolicy(5)  

sleV2Security4ACLPolicyControlStatus 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2Security4ACLPolicyControlTimer 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2Security4ACLPolicyControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleV2Security4ACLPolicyControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2Security4ACLPolicyControlIndex 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.6
The index of policy
Status: current Access: read-write
OBJECT-TYPE    
  IntPolicyIndex  

sleV2Security4ACLPolicyControlName 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.7
The name of policy
Status: current Access: read-write
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLPolicyControlPriority 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.8
The priority of the policy low : default
Status: current Access: read-write
OBJECT-TYPE    
  IntRulePriority  

sleV2Security4ACLPolicyControlMatchFlag 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.9
The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
Status: current Access: read-write
OBJECT-TYPE    
  IntPermit  

sleV2Security4ACLPolicyControlNomatchFlag 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.10
The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow
Status: current Access: read-write
OBJECT-TYPE    
  IntPermit  

sleV2Security4ACLPolicyControlFlowID 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.11
The index of flow
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleV2Security4ACLPolicyControlClassID 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.12
The index of class
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleV2Security4ACLPolicyNotification 1.3.6.1.4.1.6296.102.7.2.5.4.1.3
OBJECT IDENTIFIER    

sleACLPolicyCreated 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLPolicyInfoChanged 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLPolicyMatchActionChanged 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLPolicyNomatchActionChanged 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLPolicyDestroyed 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2Security4ACLPolicyFlowClass 1.3.6.1.4.1.6296.102.7.2.5.4.2
OBJECT IDENTIFIER    

sleV2Security4ACLPolicyFlowClassTable 1.3.6.1.4.1.6296.102.7.2.5.4.2.1
ACL policy flow class table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2Security4ACLPolicyFlowClassEntry

sleV2Security4ACLPolicyFlowClassEntry 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1
key: sleV2Security4ACLPolicyIndex, sleV2Security4ACLPolicyFlowClassIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2Security4ACLPolicyFlowClassEntry  

sleV2Security4ACLPolicyFlowClassIndex 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.1
The index of flow or class in policy
Status: current Access: read-only
OBJECT-TYPE    
  IntFlowIndex  

sleV2Security4ACLPolicyFlowClassType 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.2
The flag about flow or class
Status: current Access: read-only
OBJECT-TYPE    
  IntFlowOrClass  

sleV2Security4ACLPolicyFlowClassID 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.3
The identifier of class or flow
Status: current Access: read-only
OBJECT-TYPE    
  IntFlowIndex  

sleV2Security4ACLPolicyFlowClassName 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.4
The name of class or flow
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2Security4ACLPolicyFlowClassControl 1.3.6.1.4.1.6296.102.7.2.5.4.2.2
OBJECT IDENTIFIER    

sleV2Security4ACLPolicyFlowClassControlRequest 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER addFlowClass(1), deleteFlowClass(2), deleteAllFlow(3), deleteAllClass(4), deleteAllFlowClass(5)  

sleV2Security4ACLPolicyFlowClassControlStatus 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.2
The status of user command
Status: current Access: read-write
OBJECT-TYPE    
  SleControlStatusType  

sleV2Security4ACLPolicyFlowClassControlTimer 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2Security4ACLPolicyFlowClassControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.4
The time stamp of the last command(end of command)
Status: current Access: read-write
OBJECT-TYPE    
  TimeTicks  

sleV2Security4ACLPolicyFlowClassControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.5
The result of the last user command
Status: current Access: read-write
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2Security4ACLPolicyFlowClassControlPolicyIndex 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.6
The index of Policy
Status: current Access: read-write
OBJECT-TYPE    
  IntPolicyIndex  

sleV2Security4ACLPolicyFlowClassControlIndex 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.7
The index of flow or class in this policy
Status: current Access: read-write
OBJECT-TYPE    
  IntFlowIndex  

sleV2Security4ACLPolicyFlowClassControlType 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.8
The type of flow or class
Status: current Access: read-write
OBJECT-TYPE    
  IntFlowOrClass  

sleV2Security4ACLPolicyFlowClassControlFlowID 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.9
The index of flow Available according to sleV2QoS4PolicyFlowClassControlType.
Status: current Access: read-write
OBJECT-TYPE    
  IntFlowIndex  

sleV2Security4ACLPolicyFlowClassControlClassID 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.10
The index of class Available according to sleV2QoS4PolicyFlowClassControlType.
Status: current Access: read-write
OBJECT-TYPE    
  IntClassIndex  

sleV2Security4ACLPolicyFlowClassNotification 1.3.6.1.4.1.6296.102.7.2.5.4.2.3
OBJECT IDENTIFIER    

sleACLPolicyFlowAdded 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLPolicyFlowDeleted 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLPolicyAllFlowDeleted 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLPolicyAllClassDeleted 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleACLPolicyAllFlowClassDeleted 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.5
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2Security4ACLGroup 1.3.6.1.4.1.6296.102.7.2.5.5
OBJECT IDENTIFIER    

sleV2Security4ACLGroupIf 1.3.6.1.4.1.6296.102.7.2.5.5.1
OBJECT IDENTIFIER    

sleV2Security4ACLGroupIfTable 1.3.6.1.4.1.6296.102.7.2.5.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2Security4ACLGroupIfEntry

sleV2Security4ACLGroupIfEntry 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2Security4ACLGroupIfEntry  

sleV2Security4ACLGroupIfindex 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.1
interface index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleV2Security4ACLGroupIfType 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.2
The access-list type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ip(3), mac(4)  

sleV2Security4ACLGroupIfName 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.3
The access-list name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2Security4ACLGroupIfPriority 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.4
The policy priority
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), highest(4)  

sleV2Security4ACLGroupIfControl 1.3.6.1.4.1.6296.102.7.2.5.5.1.2
OBJECT IDENTIFIER    

sleV2Security4ACLGroupIfControlRequest 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setSecurityAclGroupIfProfile(1), delSecurityAclGroupIfProfile(2)  

sleV2Security4ACLGroupIfControlStatus 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.2
The status of user command
Status: current Access: read-write
OBJECT-TYPE    
  SleControlStatusType  

sleV2Security4ACLGroupIfControlTimer 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2Security4ACLGroupIfControlReqResult 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.4
The time stamp of the last command(end of command)
Status: current Access: read-write
OBJECT-TYPE    
  TimeTicks  

sleV2Security4ACLGroupIfControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.5
The result of the last user command
Status: current Access: read-write
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2Security4ACLGroupIfConrolIndex 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.6
interface index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleV2Security4ACLGroupIfControlType 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.7
The access-list type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ip(3), mac(4)  

sleV2Security4ACLGroupIfControlName 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.8
The access-list name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2Security4ACLGroupIfControlPriority 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.9
Integer 1: low(1) 2: medium(2) 3: high(3) 4: highest(4) The policy priority
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), highest(4)  

sleV2SecurityACLGroupIfNotification 1.3.6.1.4.1.6296.102.7.2.5.5.1.3
OBJECT IDENTIFIER    

sleV2Security4ACLGroupIfProfileAdd 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.1
setSecurityACLGroupIfProfile
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2Security4ACLGroupIfProfileDelete 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.2
delSecurityACLGroupIfProfile
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2SecuritySACL 1.3.6.1.4.1.6296.102.7.2.6
OBJECT IDENTIFIER    

sleV2SecuritySACLTable 1.3.6.1.4.1.6296.102.7.2.6.1
ACL table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2SecuritySACLEntry

sleV2SecuritySACLEntry 1.3.6.1.4.1.6296.102.7.2.6.1.1
key: sleV2SecuritySACLName
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2SecuritySACLEntry  

sleV2SecuritySACLName 1.3.6.1.4.1.6296.102.7.2.6.1.1.1
Name of this ACL rule
Status: current Access: read-only
OBJECT-TYPE    
  OctetName  

sleV2SecuritySACLSrcIpaddr 1.3.6.1.4.1.6296.102.7.2.6.1.1.2
The IP address to match against the packet's source IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleV2SecuritySACLSrcPrefixLength 1.3.6.1.4.1.6296.102.7.2.6.1.1.3
Subnet mask.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..32  

sleV2SecuritySACLDstIpAddr 1.3.6.1.4.1.6296.102.7.2.6.1.1.4
The IP address to match against the packet's destination IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleV2SecuritySACLDstPrefixLength 1.3.6.1.4.1.6296.102.7.2.6.1.1.5
Subnet mask.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..32  

sleV2SecuritySACLProtocolType 1.3.6.1.4.1.6296.102.7.2.6.1.1.6
The type of IP protocol The flat internet protocol is from sleV2SecuritySACLTcpflag to sleV2SecuritySACLIcmpCode If the value is tcp(6) or udp(17), From sleV2SecuritySACLTcpflag to sleV2SecuritySACLDstL4Port value is available If the value is icmp(1), The value of sleV2SecuritySACLIcmpType and sleV2SecuritySACLIcmpCode is available The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntProtocolType  

sleV2SecuritySACLTcpflag 1.3.6.1.4.1.6296.102.7.2.6.1.1.7
TCP flag
Status: current Access: read-only
OBJECT-TYPE    
  BITS reserv(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)  

sleV2SecuritySACLSrcL4Port 1.3.6.1.4.1.6296.102.7.2.6.1.1.8
The source service port number (only valid for TCP or UDP packet)..
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2SecuritySACLDstL4Port 1.3.6.1.4.1.6296.102.7.2.6.1.1.9
The destination service port number (only valid for TCP or UDP packet).
Status: current Access: read-only
OBJECT-TYPE    
  IntL4Port  

sleV2SecuritySACLIcmpType 1.3.6.1.4.1.6296.102.7.2.6.1.1.10
The Type of ICMP message The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntProtocolType  

sleV2SecuritySACLIcmpCode 1.3.6.1.4.1.6296.102.7.2.6.1.1.11
The code of ICMP message The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  IntProtocolType  

sleV2SecuritySACLPriority 1.3.6.1.4.1.6296.102.7.2.6.1.1.12
The type of ICMP message The value of -1 means any(not set)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), highest(4)  

sleV2SecuritySACLMatchAction 1.3.6.1.4.1.6296.102.7.2.6.1.1.13
Action for packets that match against this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2)  

sleV2SecuritySACLNomatchAction 1.3.6.1.4.1.6296.102.7.2.6.1.1.14
Action for packets that don't match against this ACL rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2)  

sleV2SecuritySACLControl 1.3.6.1.4.1.6296.102.7.2.6.2
OBJECT IDENTIFIER    

sleV2SecuritySACLControlRequest 1.3.6.1.4.1.6296.102.7.2.6.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER createSAclRule(1), destroySAclRule(2), destroyAllSAclRule(3)  

sleV2SecuritySACLControlStatus 1.3.6.1.4.1.6296.102.7.2.6.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2SecuritySACLControlTimer 1.3.6.1.4.1.6296.102.7.2.6.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2SecuritySACLControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.6.2.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleV2SecuritySACLControlReqResult 1.3.6.1.4.1.6296.102.7.2.6.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2SecuritySACLControlName 1.3.6.1.4.1.6296.102.7.2.6.2.6
Name of this ACL rule
Status: current Access: read-write
OBJECT-TYPE    
  OctetName  

sleV2SecuritySACLControlSrcIpaddr 1.3.6.1.4.1.6296.102.7.2.6.2.7
The IP address to match against the packet's source IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleV2SecuritySACLControlSrcPrefixLength 1.3.6.1.4.1.6296.102.7.2.6.2.8
Subnet mask.
Status: current Access: read-write
OBJECT-TYPE    
  IntIpAddrMask  

sleV2SecuritySACLControlDstIpaddr 1.3.6.1.4.1.6296.102.7.2.6.2.9
The IP address to match against the packet's destination IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sleV2SecuritySACLControlDstPrefixLength 1.3.6.1.4.1.6296.102.7.2.6.2.10
Subnet mask.
Status: current Access: read-write
OBJECT-TYPE    
  IntIpAddrMask  

sleV2SecuritySACLControlProtocolType 1.3.6.1.4.1.6296.102.7.2.6.2.11
The IP protocol type value
Status: current Access: read-write
OBJECT-TYPE    
  IntProtocolType  

sleV2SecuritySACLControlTcpflag 1.3.6.1.4.1.6296.102.7.2.6.2.12
TCP flag
Status: current Access: read-write
OBJECT-TYPE    
  BITS reserv(0), reserv1(1), urg(2), ack(3), psh(4), rst(5), syn(6), fin(7)  

sleV2SecuritySACLControlSrcL4Port 1.3.6.1.4.1.6296.102.7.2.6.2.13
The source service port number (only valid for TCP or UDP packet)..
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2SecuritySACLControlDstL4Port 1.3.6.1.4.1.6296.102.7.2.6.2.14
The destination service port number (only valid for TCP or UDP packet).
Status: current Access: read-write
OBJECT-TYPE    
  IntL4Port  

sleV2SecuritySACLControlIcmpType 1.3.6.1.4.1.6296.102.7.2.6.2.15
The type of ICMP message The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntProtocolType  

sleV2SecuritySACLControlIcmpCode 1.3.6.1.4.1.6296.102.7.2.6.2.16
The code of ICMP message The value of -1 means any(not set)
Status: current Access: read-write
OBJECT-TYPE    
  IntProtocolType  

sleV2SecuritySACLControlPriority 1.3.6.1.4.1.6296.102.7.2.6.2.17
The Priority of this ACL rule)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), highest(4)  

sleV2SecuritySACLControlMatchAction 1.3.6.1.4.1.6296.102.7.2.6.2.18
Action for packets that match against this ACL rule.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2)  

sleV2SecuritySACLControlNomatchAction 1.3.6.1.4.1.6296.102.7.2.6.2.19
Action for packets that don't match against this ACL rule.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), permit(1), deny(2)  

sleV2SecuritySACLNotification 1.3.6.1.4.1.6296.102.7.2.6.3
OBJECT IDENTIFIER    

sleSACLCreated 1.3.6.1.4.1.6296.102.7.2.6.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSACLDestroyed 1.3.6.1.4.1.6296.102.7.2.6.3.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleSACLAllDestroyed 1.3.6.1.4.1.6296.102.7.2.6.3.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2SecurityACLStatistics 1.3.6.1.4.1.6296.102.7.2.7
OBJECT IDENTIFIER    

sleV2SecurityACLStatisticsBase 1.3.6.1.4.1.6296.102.7.2.7.1
OBJECT IDENTIFIER    

sleV2SecurityACLStatisticsBaseInfo 1.3.6.1.4.1.6296.102.7.2.7.1.1
OBJECT IDENTIFIER    

sleV2SecurityACLStatisticsSyslogStatus 1.3.6.1.4.1.6296.102.7.2.7.1.1.1
ACL statistics syslog status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleV2SecurityACLStatisticsBaseControl 1.3.6.1.4.1.6296.102.7.2.7.1.2
OBJECT IDENTIFIER    

sleV2SecurityACLStatisticsBaseControlRequest 1.3.6.1.4.1.6296.102.7.2.7.1.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER aclSyslogModeChange(1)  

sleV2SecurityACLStatisticsBaseControlStatus 1.3.6.1.4.1.6296.102.7.2.7.1.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2SecurityACLStatisticsBaseControlTimer 1.3.6.1.4.1.6296.102.7.2.7.1.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2SecurityACLStatisticsBaseControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.7.1.2.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleV2SecurityACLStatisticsBaseControlReqResult 1.3.6.1.4.1.6296.102.7.2.7.1.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2SecurityACLStatisticsBaseControlSyslogMode 1.3.6.1.4.1.6296.102.7.2.7.1.2.6
The ACL statistics syslog mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleV2SecurityACLStatisticsBaseNotification 1.3.6.1.4.1.6296.102.7.2.7.1.3
OBJECT IDENTIFIER    

sleV2SecurityACLStatisticsSyslogModeChanged 1.3.6.1.4.1.6296.102.7.2.7.1.3.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2SecurityACLStatisticsPacketHistory 1.3.6.1.4.1.6296.102.7.2.7.2
OBJECT IDENTIFIER    

sleV2SecurityACLPacketCountTable 1.3.6.1.4.1.6296.102.7.2.7.2.1
ACL packet count table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2SecurityACLPacketCountEntry

sleV2SecurityACLPacketCountEntry 1.3.6.1.4.1.6296.102.7.2.7.2.1.1
key: sleV2SecuritySACLName
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2SecurityACLPacketCountEntry  

sleV2SecurityACLTotalPacket 1.3.6.1.4.1.6296.102.7.2.7.2.1.1.1
ACL total packet
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sleV2SecurityACLSrcHistoryTable 1.3.6.1.4.1.6296.102.7.2.7.2.2
ACL source history table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2SecurityACLSrcHistoryEntry

sleV2SecurityACLSrcHistoryEntry 1.3.6.1.4.1.6296.102.7.2.7.2.2.1
key: sleV2SecuritySACLName, sleV2SecurityACLSrcHistoryIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2SecurityACLSrcHistoryEntry  

sleV2SecurityACLSrcHistoryIndex 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.1
The ACL index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..1024  

sleV2SecurityACLSrcHistoryIpAddr 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.2
The ACl IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

sleV2SecurityACLStatisticsControl 1.3.6.1.4.1.6296.102.7.2.7.2.3
OBJECT IDENTIFIER    

sleV2SecurityACLStatisticsControlRequest 1.3.6.1.4.1.6296.102.7.2.7.2.3.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clearAruleStatus(1)  

sleV2SecurityACLStatisticsControlStatus 1.3.6.1.4.1.6296.102.7.2.7.2.3.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2SecurityACLStatisticsControlTimer 1.3.6.1.4.1.6296.102.7.2.7.2.3.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2SecurityACLStatisticsControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.7.2.3.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleV2SecurityACLStatisticsControlReqResult 1.3.6.1.4.1.6296.102.7.2.7.2.3.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2SecurityACLStatisticsControlName 1.3.6.1.4.1.6296.102.7.2.7.2.3.6
The ACL statistics name
Status: current Access: read-write
OBJECT-TYPE    
  OctetName  

sleV2SecurityACLStatisticsNotification 1.3.6.1.4.1.6296.102.7.2.7.2.4
OBJECT IDENTIFIER    

sleV2SecurityACLStatisticsCleared 1.3.6.1.4.1.6296.102.7.2.7.2.4.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2CpuPacketFilter 1.3.6.1.4.1.6296.102.7.2.8
OBJECT IDENTIFIER    

sleV2CpuPacketFilterTable 1.3.6.1.4.1.6296.102.7.2.8.1
cpu packet filter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2CpuPacketFilterEntry

sleV2CpuPacketFilterEntry 1.3.6.1.4.1.6296.102.7.2.8.1.1
key: sleV2CpuPacketFilterIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2CpuPacketFilterEntry  

sleV2CpuPacketFilterIndex 1.3.6.1.4.1.6296.102.7.2.8.1.1.1
The index of cpu packet filter
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

sleV2CpuPacketFilterName 1.3.6.1.4.1.6296.102.7.2.8.1.1.2
The name of cpu packet filter
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterCreationTime 1.3.6.1.4.1.6296.102.7.2.8.1.1.3
The creation time. (unit : sec)
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleV2CpuPacketFilterElapsedtimeAfterClear 1.3.6.1.4.1.6296.102.7.2.8.1.1.4
The elapsed time after clear (unit : sec)
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sleV2CpuPacketFilterStage 1.3.6.1.4.1.6296.102.7.2.8.1.1.5
The stage of cpu packet filter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cpuingress(1), cpuegress(2), portrx(3), porttx(4), vlanAssigned(5), unknown(255)  

sleV2CpuPacketFilterPriority 1.3.6.1.4.1.6296.102.7.2.8.1.1.6
The priority of cpu packet filter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleV2CpuPacketFilterAction 1.3.6.1.4.1.6296.102.7.2.8.1.1.7
The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER drop(1), permit(2), rateLimit(3), pass(4), dot1q(5), dot1qAttach(6), dot1qDetach(7), unknown(255)  

sleV2CpuPacketFilterActionRateLimit 1.3.6.1.4.1.6296.102.7.2.8.1.1.8
The allowed-packet count per second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

sleV2CpuPacketFilterActionBurstSize 1.3.6.1.4.1.6296.102.7.2.8.1.1.9
The burst-allowed-packet count.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

sleV2CpuPacketFilterActionTpid 1.3.6.1.4.1.6296.102.7.2.8.1.1.10
The Action TPID The value 65535(0xffff) means any.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleV2CpuPacketFilterActionPcp 1.3.6.1.4.1.6296.102.7.2.8.1.1.11
The Action PCP. The value 255(0xff) means any.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7 | 255  

sleV2CpuPacketFilterActionVid 1.3.6.1.4.1.6296.102.7.2.8.1.1.12
The Action VID The value 65535(0xffff) means any.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4094 | 65535  

sleV2CpuPacketFilterActionTagPosition 1.3.6.1.4.1.6296.102.7.2.8.1.1.13
The Action tag position. 1 s-vlan 2 c-vlan
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..8  

sleV2CpuPacketFilterMatchTable 1.3.6.1.4.1.6296.102.7.2.8.2
cpu packet filter match table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2CpuPacketFilterMatchEntry

sleV2CpuPacketFilterMatchEntry 1.3.6.1.4.1.6296.102.7.2.8.2.1
key: sleV2CpuPacketFilterIndex, sleV2CpuPacketFilterMatchIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2CpuPacketFilterMatchEntry  

sleV2CpuPacketFilterMatchIndex 1.3.6.1.4.1.6296.102.7.2.8.2.1.1
The match entry Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleV2CpuPacketFilterMatchType 1.3.6.1.4.1.6296.102.7.2.8.2.1.2
The match classifiter type.
Status: current Access: read-only
OBJECT-TYPE    
  BITS vid(0), cos(1), port(2), offset(3), dot1q(4)  

sleV2CpuPacketFilterMatchCos 1.3.6.1.4.1.6296.102.7.2.8.2.1.3
The matched CoS Queue.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterMatchPort 1.3.6.1.4.1.6296.102.7.2.8.2.1.4
The matched port index.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterMatchVidmap 1.3.6.1.4.1.6296.102.7.2.8.2.1.5
The matched VID.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterMatchTagPosition 1.3.6.1.4.1.6296.102.7.2.8.2.1.6
The matched tag position.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..8  

sleV2CpuPacketFilterMatchTpid 1.3.6.1.4.1.6296.102.7.2.8.2.1.7
The matched TPID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

sleV2CpuPacketFilterMatchPcp 1.3.6.1.4.1.6296.102.7.2.8.2.1.8
The matched PCP
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7 | 255  

sleV2CpuPacketFilterMatchVid 1.3.6.1.4.1.6296.102.7.2.8.2.1.9
The matched VID
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 1..4094 | 65535  

sleV2CpuPacketFilterMatchOffset 1.3.6.1.4.1.6296.102.7.2.8.2.1.10
The matched offset
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..127  

sleV2CpuPacketFilterMatchLength 1.3.6.1.4.1.6296.102.7.2.8.2.1.11
The matched Length
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

sleV2CpuPacketFilterMatchData 1.3.6.1.4.1.6296.102.7.2.8.2.1.12
The matched data. (HEX string)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterMatchMask 1.3.6.1.4.1.6296.102.7.2.8.2.1.13
The matched mask. (HEX string)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterMatchDesc 1.3.6.1.4.1.6296.102.7.2.8.2.1.14
The matched Description
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterControl 1.3.6.1.4.1.6296.102.7.2.8.3
OBJECT IDENTIFIER    

sleV2CpuPacketFilterControlRequest 1.3.6.1.4.1.6296.102.7.2.8.3.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER addCpuPktFilter(1), delCpuPktfilter(2), setAction(3), addMatch(4), delMatch(5)  

sleV2CpuPacketFilterControlStatus 1.3.6.1.4.1.6296.102.7.2.8.3.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2CpuPacketFilterControlTimer 1.3.6.1.4.1.6296.102.7.2.8.3.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2CpuPacketFilterControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.8.3.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sleV2CpuPacketFilterControlReqResult 1.3.6.1.4.1.6296.102.7.2.8.3.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2CpuPacketFilterControlIndex 1.3.6.1.4.1.6296.102.7.2.8.3.6
The match entry Index
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2147483647  

sleV2CpuPacketFilterControlName 1.3.6.1.4.1.6296.102.7.2.8.3.7
Cpu packet filter name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterControlStage 1.3.6.1.4.1.6296.102.7.2.8.3.8
The stage of cpu packet filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cpuingress(1), cpuegress(2), portrx(3), porttx(4), vlanAssigned(5), unknown(255)  

sleV2CpuPacketFilterControlPriority 1.3.6.1.4.1.6296.102.7.2.8.3.9
The priority of cpu packet filter.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleV2CpuPacketFilterControlAction 1.3.6.1.4.1.6296.102.7.2.8.3.10
The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER drop(1), permit(2), rateLimit(3), pass(4), dot1q(5), dot1qAttach(6), dot1qDetach(7), unknown(255)  

sleV2CpuPacketFilterControlActionRateLimit 1.3.6.1.4.1.6296.102.7.2.8.3.11
The allowed-packet count per second.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

sleV2CpuPacketFilterControlActionBurstSize 1.3.6.1.4.1.6296.102.7.2.8.3.12
The burst-allowed-packet count.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

sleV2CpuPacketFilterControlActionTpid 1.3.6.1.4.1.6296.102.7.2.8.3.13
The Action TPID The value 65535(0xffff) means any.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleV2CpuPacketFilterControlActionPcp 1.3.6.1.4.1.6296.102.7.2.8.3.14
The Action PCP. The value 255(0xff) means any.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7 | 255  

sleV2CpuPacketFilterControlActionVid 1.3.6.1.4.1.6296.102.7.2.8.3.15
The Action VID The value 65535(0xffff) means any.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4094 | 65535  

sleV2CpuPacketFilterControlActionTagPosition 1.3.6.1.4.1.6296.102.7.2.8.3.16
The Action tag position. 1: S-vlan 2: C-vlan M2200 uses only 1 and 2.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..8  

sleV2CpuPacketFilterControlMatchType 1.3.6.1.4.1.6296.102.7.2.8.3.17
The match classifiter type.
Status: current Access: read-write
OBJECT-TYPE    
  BITS vid(0), cos(1), port(2), offset(3), dot1q(4)  

sleV2CpuPacketFilterControlMatchCos 1.3.6.1.4.1.6296.102.7.2.8.3.18
The matched CoS Queue. M2200 doesn't use
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterControlMatchPort 1.3.6.1.4.1.6296.102.7.2.8.3.19
The matched port index.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterControlMatchVidmap 1.3.6.1.4.1.6296.102.7.2.8.3.20
The matched VID M2200 doesn't use
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterControlMatchTagPosition 1.3.6.1.4.1.6296.102.7.2.8.3.21
The matched tag position M2200 doesn't use
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..8  

sleV2CpuPacketFilterControlMatchTpid 1.3.6.1.4.1.6296.102.7.2.8.3.22
The matched TPID.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

sleV2CpuPacketFilterControlMatchPcp 1.3.6.1.4.1.6296.102.7.2.8.3.23
The matched PCP
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7 | 255  

sleV2CpuPacketFilterControlMatchVid 1.3.6.1.4.1.6296.102.7.2.8.3.24
The matched VID
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..4094 | 65535  

sleV2CpuPacketFilterControlMatchOffset 1.3.6.1.4.1.6296.102.7.2.8.3.25
The matched offset
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..127  

sleV2CpuPacketFilterControlMatchLength 1.3.6.1.4.1.6296.102.7.2.8.3.26
The matched Length
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

sleV2CpuPacketFilterControlMatchData 1.3.6.1.4.1.6296.102.7.2.8.3.27
he matched data. (HEX string)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterControlMatchMask 1.3.6.1.4.1.6296.102.7.2.8.3.28
The matched mask. (HEX string)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterControlMatchDesc 1.3.6.1.4.1.6296.102.7.2.8.3.29
The matched Description
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2CpuPacketFilterNotification 1.3.6.1.4.1.6296.102.7.2.8.4
OBJECT IDENTIFIER    

sleV2CpuPacketFilterAdded 1.3.6.1.4.1.6296.102.7.2.8.4.1
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2CpuPacketFilterDeleted 1.3.6.1.4.1.6296.102.7.2.8.4.2
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2CpuPacketFilterActionChanged 1.3.6.1.4.1.6296.102.7.2.8.4.3
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2CpuPacketFilterMatchChanged 1.3.6.1.4.1.6296.102.7.2.8.4.4
Description.
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2VlanOperation 1.3.6.1.4.1.6296.102.7.2.9
OBJECT IDENTIFIER    

sleV2VlanOperationTable 1.3.6.1.4.1.6296.102.7.2.9.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2VlanOperationEntry

sleV2VlanOperationEntry 1.3.6.1.4.1.6296.102.7.2.9.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2VlanOperationEntry  

sleV2VlanOperationIndex 1.3.6.1.4.1.6296.102.7.2.9.1.1.1
The vlan operation index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65565  

sleV2VlanOperationName 1.3.6.1.4.1.6296.102.7.2.9.1.1.2
The vlan operation name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationStage 1.3.6.1.4.1.6296.102.7.2.9.1.1.3
The vlan operation stage.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ingressSlowPath(1), egressSlowPath(2)  

sleV2VlanOperationProiroty 1.3.6.1.4.1.6296.102.7.2.9.1.1.4
The vlan operation priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

sleV2VlanOperationPort 1.3.6.1.4.1.6296.102.7.2.9.1.1.5
The vlan operation ports
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationOuterVlan 1.3.6.1.4.1.6296.102.7.2.9.1.1.6
The Outer vlan.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationInnerVlan 1.3.6.1.4.1.6296.102.7.2.9.1.1.7
The inner Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationEtherType 1.3.6.1.4.1.6296.102.7.2.9.1.1.8
The vlan operation ether-type.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationIpProtocol 1.3.6.1.4.1.6296.102.7.2.9.1.1.9
The vlan operation IP Protocol
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationArpSip 1.3.6.1.4.1.6296.102.7.2.9.1.1.10
The vlan operation source-IPaddress.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationArpSipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.1.1.11
The vlan operation source-IPAddress prefix-length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationSip 1.3.6.1.4.1.6296.102.7.2.9.1.1.12
The vlan operation Source-IPaddress.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationSipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.1.1.13
The vlan operation Source-IPAddress prefix-length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationDip 1.3.6.1.4.1.6296.102.7.2.9.1.1.14
The vlan operation Destination-IPaddress.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationDipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.1.1.15
The vlan operation Destination-IPAddress prefix-length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationAction 1.3.6.1.4.1.6296.102.7.2.9.1.1.16
The vlan-operation action types.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER addServiceVlanTag(1), replaceServiceVlanID(2), removeServiceVlanTag(3), addCustomerVlanTag(4), replaceCustomerVlanID(5), removeCustomerVlanTag(6)  

sleV2VlanOperationActionVid 1.3.6.1.4.1.6296.102.7.2.9.1.1.17
The vlan operation action-vid.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4095  

sleV2VlanOperationControl 1.3.6.1.4.1.6296.102.7.2.9.2
OBJECT IDENTIFIER    

sleV2VlanOperationControlRequest 1.3.6.1.4.1.6296.102.7.2.9.2.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER addVlanOperation(1), delVlanOperation(2)  

sleV2VlanOperationControlStatus 1.3.6.1.4.1.6296.102.7.2.9.2.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2VlanOperationControlTimer 1.3.6.1.4.1.6296.102.7.2.9.2.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2VlanOperationControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.9.2.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleV2VlanOperationControlReqResult 1.3.6.1.4.1.6296.102.7.2.9.2.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2VlanOperationControlIndex 1.3.6.1.4.1.6296.102.7.2.9.2.6
The vlan operation index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleV2VlanOperationControlName 1.3.6.1.4.1.6296.102.7.2.9.2.7
The vlan operation name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationControlStage 1.3.6.1.4.1.6296.102.7.2.9.2.8
The vlan operation stage.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ingressSlowPath(1), egressSlowPath(2)  

sleV2VlanOperationControlProiroty 1.3.6.1.4.1.6296.102.7.2.9.2.9
The vlan operation priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

sleV2VlanOperationControlPort 1.3.6.1.4.1.6296.102.7.2.9.2.10
The vlan operation ports
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationControlOuterVlan 1.3.6.1.4.1.6296.102.7.2.9.2.11
The Outer vlan.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationControlInnerVlan 1.3.6.1.4.1.6296.102.7.2.9.2.12
The Inner vlan.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationControlEtherType 1.3.6.1.4.1.6296.102.7.2.9.2.13
The vlan operation ether-type.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationControlIpProtocol 1.3.6.1.4.1.6296.102.7.2.9.2.14
The vlan operation IP Protocol
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationControlArpSip 1.3.6.1.4.1.6296.102.7.2.9.2.15
The vlan operation source-IPaddress.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationControlArpSipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.2.16
The vlan operation source-IPAddress prefix-length.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationControlSip 1.3.6.1.4.1.6296.102.7.2.9.2.17
The vlan operation Source-IPaddress.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationControlSipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.2.18
The vlan operation Source-IPAddress prefix-length.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationControlDip 1.3.6.1.4.1.6296.102.7.2.9.2.19
The vlan operation Destination-IPaddress.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2VlanOperationControlDipPfxLen 1.3.6.1.4.1.6296.102.7.2.9.2.20
The vlan operation Destination-IPAddress prefix-length.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

sleV2VlanOperationControlAction 1.3.6.1.4.1.6296.102.7.2.9.2.21
The vlan-operation action types.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER addServiceVlanTag(1), replaceServiceVlanID(2), removeServiceVlanTag(3), addCustomerVlanTag(4), replaceCustomerVlanID(5), removeCustomerVlanTag(6)  

sleV2VlanOperationControlActionVid 1.3.6.1.4.1.6296.102.7.2.9.2.22
The vlan operation action-vid.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4095  

sleV2VlanOperationNotification 1.3.6.1.4.1.6296.102.7.2.9.3
OBJECT IDENTIFIER    

sleV2VlanOperationCreated 1.3.6.1.4.1.6296.102.7.2.9.3.1
addVlanOperation
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2VlanOperationDeleted 1.3.6.1.4.1.6296.102.7.2.9.3.2
delVlanOperation
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2EthernetService 1.3.6.1.4.1.6296.102.7.2.10
OBJECT IDENTIFIER    

sleV2EthernetServiceBase 1.3.6.1.4.1.6296.102.7.2.10.1
OBJECT IDENTIFIER    

sleV2EthernetServiceEnableStatus 1.3.6.1.4.1.6296.102.7.2.10.1.1
The ethernet service mode status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), rt(1), cot(2)  

sleV2EthernetServiceEnableManagement 1.3.6.1.4.1.6296.102.7.2.10.1.2
The global management access status ( only in RT mode )
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleV2EthernetServiceHealthCheckPort 1.3.6.1.4.1.6296.102.7.2.10.1.3
The health check port of uplink. ( only in COT mode )
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceHealthCheckVid 1.3.6.1.4.1.6296.102.7.2.10.1.4
The health check vid of uplink. ( only in COT mode )
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceTable 1.3.6.1.4.1.6296.102.7.2.10.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SleV2EthernetServiceEntry

sleV2EthernetServiceEntry 1.3.6.1.4.1.6296.102.7.2.10.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SleV2EthernetServiceEntry  

sleV2EthernetServiceSid 1.3.6.1.4.1.6296.102.7.2.10.2.1.1
The unique number is given by service identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

sleV2EthernetServiceType 1.3.6.1.4.1.6296.102.7.2.10.2.1.2
The ethernet service type 1: unicast 2: multicast
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unicast(1), multicast(2)  

sleV2EthernetServiceRtCustomerPort 1.3.6.1.4.1.6296.102.7.2.10.2.1.3
The Configuring service's customer port for RT mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceRtCustomerVid 1.3.6.1.4.1.6296.102.7.2.10.2.1.4
The Configuring service's customer vid for RT mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceRtNetworkPort 1.3.6.1.4.1.6296.102.7.2.10.2.1.5
The Configuring service's network port for RT mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceRtNetworkVid 1.3.6.1.4.1.6296.102.7.2.10.2.1.6
The Configuring service's network vid for RT mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceRtEnableManagement 1.3.6.1.4.1.6296.102.7.2.10.2.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleV2EthernetServiceCotExternalPort 1.3.6.1.4.1.6296.102.7.2.10.2.1.8
The Configuring service's external port for COT mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceCotExternalVid 1.3.6.1.4.1.6296.102.7.2.10.2.1.9
The Configuring service's external vid for COT mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceCotInternalPort 1.3.6.1.4.1.6296.102.7.2.10.2.1.10
The Configuring service's internal port for COT mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceCotInternalVid 1.3.6.1.4.1.6296.102.7.2.10.2.1.11
The Configuring service's internal vid for COT mode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControl 1.3.6.1.4.1.6296.102.7.2.10.3
OBJECT IDENTIFIER    

sleV2EthernetServiceControlRequest 1.3.6.1.4.1.6296.102.7.2.10.3.1
The request of a user command
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER setEnableStatus(1), setEnableManagement(2), setHealthCheck(3), delHealthCheck(4), setSidForRT(5), setSidForCOT(6), delService(7)  

sleV2EthernetServiceControlStatus 1.3.6.1.4.1.6296.102.7.2.10.3.2
The status of user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlStatusType  

sleV2EthernetServiceControlTimer 1.3.6.1.4.1.6296.102.7.2.10.3.3
The maximum time for the manager for a long running user command
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32  

sleV2EthernetServiceControlTimeStamp 1.3.6.1.4.1.6296.102.7.2.10.3.4
The time stamp of the last command(end of command)
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sleV2EthernetServiceControlReqResult 1.3.6.1.4.1.6296.102.7.2.10.3.5
The result of the last user command
Status: current Access: read-only
OBJECT-TYPE    
  SleControlRequestResultType  

sleV2EthernetServiceControlEnableStatus 1.3.6.1.4.1.6296.102.7.2.10.3.6
The ethernet service mode status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), rt(1), cot(2)  

sleV2EthernetServiceControlEnableManagement 1.3.6.1.4.1.6296.102.7.2.10.3.7
The local management access status ( only in RT mode )
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleV2EthernetServiceControlHealthCheckPort 1.3.6.1.4.1.6296.102.7.2.10.3.8
The health check port of uplink. ( only in COT mode )
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControlHealthCheckVid 1.3.6.1.4.1.6296.102.7.2.10.3.9
The health check vid of uplink. ( only in COT mode )
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControlSid 1.3.6.1.4.1.6296.102.7.2.10.3.10
The unique number is given by service identifier.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

sleV2EthernetServiceControlType 1.3.6.1.4.1.6296.102.7.2.10.3.11
The ethernet service type 1: unicast 2: multicast
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unicast(1), multicast(2)  

sleV2EthernetServiceControlRtCustomerPort 1.3.6.1.4.1.6296.102.7.2.10.3.12
The Configuring service's customer port for RT mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControlRtCustomerVid 1.3.6.1.4.1.6296.102.7.2.10.3.13
The Configuring service's customer vid for RT mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControlRtNetworkPort 1.3.6.1.4.1.6296.102.7.2.10.3.14
The Configuring service's network port for RT mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControlRtNetworkVid 1.3.6.1.4.1.6296.102.7.2.10.3.15
The Configuring service's network vid for RT mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControlRtEnableManagement 1.3.6.1.4.1.6296.102.7.2.10.3.16
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sleV2EthernetServiceControlCotExternalPort 1.3.6.1.4.1.6296.102.7.2.10.3.17
The Configuring service's external port for COT mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControlCotExternalVid 1.3.6.1.4.1.6296.102.7.2.10.3.18
The Configuring service's external vid for COT mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControlCotInternalPort 1.3.6.1.4.1.6296.102.7.2.10.3.19
The Configuring service's internal port for COT mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceControlCotInternalVid 1.3.6.1.4.1.6296.102.7.2.10.3.20
The Configuring service's internal vid for COT mode.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sleV2EthernetServiceNotification 1.3.6.1.4.1.6296.102.7.2.10.4
OBJECT IDENTIFIER    

sleV2EthernetServiceEnableStatusChanged 1.3.6.1.4.1.6296.102.7.2.10.4.1
setEnableStatus
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2EthernetServiceEnableManagementChanged 1.3.6.1.4.1.6296.102.7.2.10.4.2
setEnableManagement
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2EthernetServiceHealthCheckChanged 1.3.6.1.4.1.6296.102.7.2.10.4.3
setHealthCheck
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2EthernetServiceHealthCheckDeleted 1.3.6.1.4.1.6296.102.7.2.10.4.4
delHealthCheck
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2EthernetServiceSidForRtModeCreated 1.3.6.1.4.1.6296.102.7.2.10.4.5
setSidForRT
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2EthernetServiceSidForCotModeCreated 1.3.6.1.4.1.6296.102.7.2.10.4.6
setSidForCOT
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2EthernetServiceSidDeleted 1.3.6.1.4.1.6296.102.7.2.10.4.7
delService
Status: current Access: read-write
NOTIFICATION-TYPE    

sleV2Security6 1.3.6.1.4.1.6296.102.7.3
OBJECT IDENTIFIER    

sleV2SecurityGroup 1.3.6.1.4.1.6296.102.7.4
Description.
Status: current Access: read-write
OBJECT-GROUP    

sleV2SecurityNotificationGroup 1.3.6.1.4.1.6296.102.7.5
Description.
Status: current Access: read-write
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor