SMARTD-MIB

File: SMARTD-MIB.mib (34300 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
GEN-MIB

Imported symbols

Counter	TimeTicks	OBJECT-TYPE
DisplayString	ifIndex	lannet

Defined Types

Timeout
INTEGER

MacAddress
OCTET STRING	Size(6)

SmartIfExtensionEntry
SEQUENCE
	smartIfExtensionEthStatus	INTEGER
	smartIfExtensionActivity	INTEGER
	smartIfExtensionViNet	INTEGER
	smartIfExtensionPriorityLevel	INTEGER
	smartIfExtensionBridgeEnable	INTEGER
	smartIfExtensionBackPressure	INTEGER
	smartIfExtensionSTAEnable	INTEGER

SmartViNetEntry
SEQUENCE
	smartViNetNumberPlusOne	INTEGER
	smartViNetNumOfMembers	INTEGER

SmartViNetElanEntry
SEQUENCE
	smartViNetElanAssociation	INTEGER
	smartViNetElanViNet	INTEGER
	smartViNetElanName	DisplayString
	smartViNetElanEntryStatus	INTEGER
	smartViNetElanIfIndex	INTEGER

SmartViNetFdbEntry
SEQUENCE
	smartViNetFdbPlusOne	INTEGER
	smartViNetFdbAddress	MacAddress
	smartViNetFdbPort	INTEGER
	smartViNetFdbStatus	INTEGER

SmartViNetStpEntry
SEQUENCE
	smartViNetStpPlusOne	INTEGER
	smartViNetStpPriority	INTEGER
	smartViNetStpTimeSinceTopologyChange	TimeTicks
	smartViNetStpTopChanges	Counter
	smartViNetStpDesignatedRoot	OCTET STRING
	smartViNetStpRootCost	INTEGER
	smartViNetStpRootPort	INTEGER
	smartViNetStpMaxAge	Timeout
	smartViNetStpHelloTime	Timeout
	smartViNetStpHoldTime	INTEGER
	smartViNetStpForwardDelay	Timeout
	smartViNetStpBridgeMaxAge	Timeout
	smartViNetStpBridgeHelloTime	Timeout
	smartViNetStpBridgeForwardDelay	Timeout
	smartViNetStpLastChange	TimeTicks

SmartLSFEntry
SEQUENCE
	smartLSFMACAddr	OCTET STRING
	smartLSFEntryStatus	INTEGER

Defined Values

smartDevices		1.3.6.1.4.1.81.27
OBJECT IDENTIFIER

smartGeneral		1.3.6.1.4.1.81.27.1
OBJECT IDENTIFIER

smartGenSWVersion		1.3.6.1.4.1.81.27.1.1
ASCII string for description and display of the smart device software version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smartGenOSVersion		1.3.6.1.4.1.81.27.1.2
ASCII string for description and display of the smart device operating system (kernel) version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smartGenSoftwareDscr		1.3.6.1.4.1.81.27.1.3
ASCII string for description and display of the smart device software information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smartGenBootVersion		1.3.6.1.4.1.81.27.1.4
ASCII string for description and display of the smart device boot software version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smartGenReset		1.3.6.1.4.1.81.27.1.5
Setting the value of this attribute to ON is interpreted as a reset command for the whole device. It initiates a complete re-initialization of the device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2)

smartGenHardwareVersion		1.3.6.1.4.1.81.27.1.6
ASCII string for description and display of the agent hardware version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smartGenMonitoringPort		1.3.6.1.4.1.81.27.1.7
Enables a user to fix one port to monitor other segment ports. For the moment, the monitoring port is port 16. In this case, this port doesn't participate to any other functions of the device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartGenMonitoredPort		1.3.6.1.4.1.81.27.1.8
Value '0' is illegal when Monitor Mode is on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smartGenLastChange		1.3.6.1.4.1.81.27.1.9
This attribute contains the value of sysUpTime at the time any change pertaining to the device: The changes are regarding the parameters of this group and any parameters of smartIfExtensionTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smartGenMonitorMode		1.3.6.1.4.1.81.27.1.10
Activates the monitor function.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2), notSupported(255)

smartGenNetworkPrefix		1.3.6.1.4.1.81.27.1.11
For ATM devices, the prefix of the switch connected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(13)

smartGenConnectMode		1.3.6.1.4.1.81.27.1.12
Enables the user to configure the ATM interface of the smart device to work in front another ATM port of a smart device: pvc or in front a switch with lane10.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	lane10(1), pvc(2), notSupported(255)

smartGenPvcVP		1.3.6.1.4.1.81.27.1.13
When the smart device is in mode pvc, the VP on which the data is runing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartGenPvcVC		1.3.6.1.4.1.81.27.1.14
When the smart device is in mode pvc, the VC on which the data is runing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartGenSlotNumber		1.3.6.1.4.1.81.27.1.15
Identifies the location (slot number) of the device in the chassis. The first slot is 1
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartGenHubMgmtIfType		1.3.6.1.4.1.81.27.1.16
This attribute describes one of the interfaces of agents existing on modules and their type. Value 'none' defines the lack of an interface whose type is recognized by the management console. Any other value defines an interface whose type is recognized by the management console and may be used as a management channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10MBit(12), proteon-80MBit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), t1-carrier(18), cept(19), basicIsdn(20), primaryIsdn(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet-3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frameRelay(32), rs232(33), para(34), arcnet(35), arcnetPlus(36), atm(37), miox25(38), sonet(39), x25ple(40), iso88022llc(41), localTalk(42), smdsDxi(43), frameRelayService(44), v35(45), hssi(46), hippi(47), modem(48), aal5(49), sonetPath(50), sonetVT(51), smdsIcip(52), propVirtual(53), propMultiplexor(54), ip(255)

smartGenHubAddr		1.3.6.1.4.1.81.27.1.17
This attribute defines an unique address by which the agent may be addressed by the management console. The address format should be consistent with the type defined by chAgHubMgmtIfType.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..20)

smartAgent		1.3.6.1.4.1.81.27.2
OBJECT IDENTIFIER

smartAgCoprocCommStatus		1.3.6.1.4.1.81.27.2.1
Attribute describing the status of the communication between the agent and its coprocessor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), commProblems(2), timeout(3)

smartAgCommDebugMode		1.3.6.1.4.1.81.27.2.2
Attribute describing the agent mode in which communication problem traps are sent to managers (value 'on') or are not sent to managers (value 'off').
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2)

smartAgConfigChangeTraps		1.3.6.1.4.1.81.27.2.3
The value of this attributes determines whether or not the agent sends Configuration Change traps to the manager.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

smartAgFaultTraps		1.3.6.1.4.1.81.27.2.4
The value of this attributes determines whether or not the agent sends Fault traps to the manager.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

smartAgLaneFaultTraps		1.3.6.1.4.1.81.27.2.5
The value of this attributes determines whether or not the agent sends Fault traps when it cannot connect to some ELAN to the manager.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

smartAgSoftwareStatus		1.3.6.1.4.1.81.27.2.6
Describes configuration of the firmware on this agent. unLoadable(1) - is returned by agents which do not support the Software Download feature; loaded(2) - is returned by agents with loaded software; downLoading(3) - when the attribute is set to this value by manager, it triggers the Software Download procedure. When procedure finished, agent software will reestablish value 'loaded(2)'. downLoadOfDownload (4) - when the attribute is set to this value by manager, it causes the Agent to download the new download software. When procedure finished, agent software will reestablish value 'loaded(2)'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unLoadable(1), loaded(2), downLoading(3), downLoadOfDownload(4)

smartIfExtension		1.3.6.1.4.1.81.27.3
OBJECT IDENTIFIER

smartIfExtensionTable		1.3.6.1.4.1.81.27.3.1
This table contains additional information concerning physical interfaces. (Ethernet and ATM ports.)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmartIfExtensionEntry

smartIfExtensionEntry		1.3.6.1.4.1.81.27.3.1.1
Additional information
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmartIfExtensionEntry

smartIfExtensionEthStatus		1.3.6.1.4.1.81.27.3.1.1.1
Valid for Ethernet Type only
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), rld(2), tld(4), notSupported(255)

smartIfExtensionActivity		1.3.6.1.4.1.81.27.3.1.1.2
Valid for ATM Type supporting redundancy.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	notActive(1), standby(2), active(3), notSupported(255)

smartIfExtensionViNet		1.3.6.1.4.1.81.27.3.1.1.3
Virtual Net Number. Value '0' for generic mode. The value for not supported is 511.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smartIfExtensionPriorityLevel		1.3.6.1.4.1.81.27.3.1.1.4
This attribute defines the priority levels of Ethernet ports. The highest priority is video.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	video(3), default(5), notSupported(255)

smartIfExtensionBridgeEnable		1.3.6.1.4.1.81.27.3.1.1.5
Valid for Ethernet port when in sniffer mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2), notSupported(255)

smartIfExtensionBackPressure		1.3.6.1.4.1.81.27.3.1.1.6
Enables a user to disable the backpressure mechanism.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2), notSupported(255)

smartIfExtensionSTAEnable		1.3.6.1.4.1.81.27.3.1.1.7
Allows user to take out a port from the STA.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2), notSupported(255)

smartViNet		1.3.6.1.4.1.81.27.4
OBJECT IDENTIFIER

smartViNetMaxNumOfNets		1.3.6.1.4.1.81.27.4.1
Maximum number of local ViNets supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartViNetCurrentBridge		1.3.6.1.4.1.81.27.4.2
ViNet that is the current owner of the STA group, and forwarding table in the bridge MIB.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smartViNetTable		1.3.6.1.4.1.81.27.4.3
This table contains the number of members belonging to each virtual nets .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmartViNetEntry

smartViNetEntry		1.3.6.1.4.1.81.27.4.3.1
Each Virtual Net will be an isolated entity. The first row of this table is the generic virtual net and is read-only.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmartViNetEntry

smartViNetNumberPlusOne		1.3.6.1.4.1.81.27.4.3.1.1
Correspondance for Virtual Net: ViNet: zero is 'generic'
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smartViNetNumOfMembers		1.3.6.1.4.1.81.27.4.3.1.2
Number of members.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartViNetElanTable		1.3.6.1.4.1.81.27.4.4
This table contains all the information concerning the association between virtual nets and ELAN name.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmartViNetElanEntry

smartViNetElanEntry		1.3.6.1.4.1.81.27.4.4.1
Each Virtual Net will be associated to an ELAN. The vinet = 0 is the first entry of the device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmartViNetElanEntry

smartViNetElanAssociation		1.3.6.1.4.1.81.27.4.4.1.1
The association number. For the first association, this entry is read-only.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smartViNetElanViNet		1.3.6.1.4.1.81.27.4.4.1.2
The virtual net number. For the first row, this entry is read-only.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smartViNetElanName		1.3.6.1.4.1.81.27.4.4.1.3
The ELAN name. For the first row, this entry is 'default' and is read-only.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smartViNetElanEntryStatus		1.3.6.1.4.1.81.27.4.4.1.4
The status of the entry. When the console starts to set the parameters of the row, the agent sets the status to notReady. The status createAndWait is set by the console, when the row is complete. After reset of the device, the row is 'active(1)'. When the console has to delete a row, it sets the status to 'destroy'. After reset, the row should disappear.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), notInService(2), notReady(3), createAndWait(4), destroy(5)

smartViNetElanIfIndex		1.3.6.1.4.1.81.27.4.4.1.5
Creating a row in this table causes the agent to add one row in the interface table. Before setting the row status to active, the agent fill this field with the value of the ifIndex of the new created row.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartViNetFdbTable		1.3.6.1.4.1.81.27.4.5
This table is the forwarding table per virtual net.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmartViNetFdbEntry

smartViNetFdbEntry		1.3.6.1.4.1.81.27.4.5.1
The forwarding tables. The smartViNetFdbPlusOne = 1 corresponds to ViNet generic.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmartViNetFdbEntry

smartViNetFdbPlusOne		1.3.6.1.4.1.81.27.4.5.1.1
This table is indexed by the virtual net number plus 1, since the first group is '0'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartViNetFdbAddress		1.3.6.1.4.1.81.27.4.5.1.2
A unicast MAC address for which the bridge has forwarding and/or filtering information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddress

smartViNetFdbPort		1.3.6.1.4.1.81.27.4.5.1.3
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartViNetFdbStatus		1.3.6.1.4.1.81.27.4.5.1.4
see dot1dTpFdbStatus.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), invalid(2), learned(3), self(4), mgmt(5)

smartViNetStpTable		1.3.6.1.4.1.81.27.4.6
This table contains all the information concerning the STA parameters per group.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmartViNetStpEntry

smartViNetStpEntry		1.3.6.1.4.1.81.27.4.6.1
The bridge will function between each of those entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmartViNetStpEntry

smartViNetStpPlusOne		1.3.6.1.4.1.81.27.4.6.1.1
This table is indexed by the virtual net number plus 1, since the first group is '0'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartViNetStpPriority		1.3.6.1.4.1.81.27.4.6.1.2
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

smartViNetStpTimeSinceTopologyChange		1.3.6.1.4.1.81.27.4.6.1.3
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smartViNetStpTopChanges		1.3.6.1.4.1.81.27.4.6.1.4
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smartViNetStpDesignatedRoot		1.3.6.1.4.1.81.27.4.6.1.5
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

smartViNetStpRootCost		1.3.6.1.4.1.81.27.4.6.1.6
The cost of the path to the root as seen from this bridge.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartViNetStpRootPort		1.3.6.1.4.1.81.27.4.6.1.7
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartViNetStpMaxAge		1.3.6.1.4.1.81.27.4.6.1.8
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Timeout

smartViNetStpHelloTime		1.3.6.1.4.1.81.27.4.6.1.9
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Timeout

smartViNetStpHoldTime		1.3.6.1.4.1.81.27.4.6.1.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smartViNetStpForwardDelay		1.3.6.1.4.1.81.27.4.6.1.11
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	Timeout

smartViNetStpBridgeMaxAge		1.3.6.1.4.1.81.27.4.6.1.12
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	Timeout	600..4000

smartViNetStpBridgeHelloTime		1.3.6.1.4.1.81.27.4.6.1.13
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1d/D9 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Timeout	100..1000

smartViNetStpBridgeForwardDelay		1.3.6.1.4.1.81.27.4.6.1.14
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	Timeout	400..3000

smartViNetStpLastChange		1.3.6.1.4.1.81.27.4.6.1.15
This attribute contains the value of sysUpTime at the time any change pertaining to the specified STA occurred.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smartViNetConsoleManagement		1.3.6.1.4.1.81.27.4.7
The ViNet to which the console belongs to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smartFatherHub		1.3.6.1.4.1.81.27.5
OBJECT IDENTIFIER

smartFatherNumberOfMac		1.3.6.1.4.1.81.27.5.1
Number of MAC Addresses of the box agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..6

smartFatherMacList		1.3.6.1.4.1.81.27.5.2
This variable is the list of Mac Addresses of the box agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..36)

smartLSFddi		1.3.6.1.4.1.81.27.6
OBJECT IDENTIFIER

smartLSFTable		1.3.6.1.4.1.81.27.6.1
This table contains the MAC addresses of all LSF100 modules on the FDDI ring. This information is needed for LANNET Topology application.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmartLSFEntry

smartLSFEntry		1.3.6.1.4.1.81.27.6.1.1
A table entry containing MAC addresses of all LSF100 modules on the FDDI ring.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmartLSFEntry

smartLSFMACAddr		1.3.6.1.4.1.81.27.6.1.1.1
This item defines the MAC address of an LSF100 connected to the FDDI ring.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

smartLSFEntryStatus		1.3.6.1.4.1.81.27.6.1.1.2
Only the status active(1) is relevant to this table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), notInService(2), notReady(3), createAndWait(4), destroy(5)

macInFrames		1.3.6.1.4.1.81.27.6.2
A count of the number of frames received by this MAC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

macCopiedFrames		1.3.6.1.4.1.81.27.6.3
A count of the number of frames addressed to and successfully copied into the station's receive buffers by this MAC. This count does not include MAC frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

macOutFrames		1.3.6.1.4.1.81.27.6.4
A count of the number of frames trasmitted by this MAC. This count does not include MAC frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

macTokenRcvd		1.3.6.1.4.1.81.27.6.5
A count of the number of times the station has received a token on this MAC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

macErrFrames		1.3.6.1.4.1.81.27.6.6
A count of the number of frames that were detected in error by this MAC that had not been detected in error by another MAC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

macLostFrames		1.3.6.1.4.1.81.27.6.7
A count of the number of instances that this MAC detected a format error during frame reception, such that the frame was stripped.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

macNotCopiedFrames		1.3.6.1.4.1.81.27.6.8
A count of the number of frames addressed to this MAC but were not copied into the station's receive buffers. This count does not include MAC frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

macRingOpState		1.3.6.1.4.1.81.27.6.9
A count of the number of times the ring has entered the Ring Operational state from the Ring Not Operational state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

fddiRingUtilization		1.3.6.1.4.1.81.27.6.10
A utilization of the FDDI ring, attached to the LSF100 modules (or other members in the family).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor