SMC-AGENT-MIB

File: SMC-AGENT-MIB.mib (10141 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises NetworkAddress IpAddress
Counter Gauge TimeTicks
DisplayString OBJECT-TYPE

Defined Types

MacAddress  
OCTET STRING Size(6)    

SmcDosWsDrvSpcEntry  
SEQUENCE    
  smcDosWsDrvSpcId INTEGER
  smcDosWsDrvSpcTxt DisplayString
  smcDosWsDrvSpcCnt Counter

SmcDosWsTrapDestEntry  
SEQUENCE    
  smcDosWsTrapId INTEGER
  smcDosWsTrapDstAdr IpAddress
  smcDosWsTrapDstPro INTEGER

Defined Values

smc 1.3.6.1.4.1.202
OBJECT IDENTIFIER    

smcDosWs 1.3.6.1.4.1.202.2
OBJECT IDENTIFIER    

smcDosWsPcTyp 1.3.6.1.4.1.202.2.1
Make and model of the PC. This may have to be entered in the configuration disk file. It may or may not be detectable via signature strings in the BIOS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsPcProc 1.3.6.1.4.1.202.2.2
This is a text string showing the processor type and indicating whether a math coprocessor exists, e.g. '80286 w/math coprocessor'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsPcBios 1.3.6.1.4.1.202.2.3
This is a text signature string identifying the PC bios, e.g. 'Phoenix 80386SX ROM BIOS PLUS Version 1.10'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsPcRam 1.3.6.1.4.1.202.2.4
This is a text string listing the PC's ram configuration, base, EMS, XMS, e.g. '640K base, 1024K EMS, 3072K XMS'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsPcDisk 1.3.6.1.4.1.202.2.5
This is a text string listing the PC's disk configuration, number and size of drives, e.g. '1.25M Fpy, 1.44M Fpy, 79M HD'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsPcVideo 1.3.6.1.4.1.202.2.6
This is a text string listing the PC's video interface type and monitor type, e.g. 'VGA Color'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsPcIo 1.3.6.1.4.1.202.2.7
This is a text string listing the parallel and serial ports installed on the PC, e.g. 'LPT1, COM1, COM2'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsDosVer 1.3.6.1.4.1.202.2.8
This is a text string listing the version of DOS, e.g. 'DOS 3.3'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsDrvId 1.3.6.1.4.1.202.2.9
This is the signature string from the network driver. It is similar to the string that is displayed by the NetWare server MONITOR nlm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsNicBasIo 1.3.6.1.4.1.202.2.10
This is the I/O base address of the adapter card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsNicIrq 1.3.6.1.4.1.202.2.11
This is the adapter IRQ number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsNicRam 1.3.6.1.4.1.202.2.12
This is the adapter card packet ram address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsNodId 1.3.6.1.4.1.202.2.13
This is the adapter card 48 bit node ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

smcDosWsIpAdr 1.3.6.1.4.1.202.2.14
This is the IP address of the PC. The agent takes this information from a configuration disk file. If the PC is also running a TCP/IP stack, it is up to the installer to specify in the agent configuration file the same IP address that the PC's TCP/IP stack has.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

smcDosWsComment 1.3.6.1.4.1.202.2.15
This is a text string which is set from a configuration disk file that contains comments about the PC that the network manager feels is meaningful. For example 'Motherboard replaced 3 times in the last year'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

smcDosWsPcDate 1.3.6.1.4.1.202.2.16
This shows the current date set into the PC to alert the network manager of potential problems with software that decides configuration currency based on file dates and times.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsPcTime 1.3.6.1.4.1.202.2.17
This shows the current time set into the PC to alert the network manager of potential problems with software that decides configuration currency based on file dates and times. Note that because of polling times this time may be erratic within a window of a few seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsRst 1.3.6.1.4.1.202.2.18
This variable always reports value = 1. Setting it to 2 results in an adapter reset, after which it will contain value = 1 again.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

smcDosWsProtoMix 1.3.6.1.4.1.202.2.19
This text string reports the most frequent transport protocols and their approximate percentages of traffic load.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsRcvPkts 1.3.6.1.4.1.202.2.20
Number of packets received by the workstation
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

smcDosWsXmtPkts 1.3.6.1.4.1.202.2.21
Number of packets sent by the workstation
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

smcDosWsDrvSpcTable 1.3.6.1.4.1.202.2.22
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SmcDosWsDrvSpcEntry

smcDosWsDrvSpcEntry 1.3.6.1.4.1.202.2.22.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SmcDosWsDrvSpcEntry  

smcDosWsDrvSpcId 1.3.6.1.4.1.202.2.22.1.1
Number of Driver Specific entry. 1 for first entry, 2 for second entry, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

smcDosWsDrvSpcTxt 1.3.6.1.4.1.202.2.22.1.2
Textual name of driver specific diagnostic counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smcDosWsDrvSpcCnt 1.3.6.1.4.1.202.2.22.1.3
Numeric value of driver specific diagnostic counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

smcDosWsTrapDestTable 1.3.6.1.4.1.202.2.23
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SmcDosWsTrapDestEntry

smcDosWsTrapDestEntry 1.3.6.1.4.1.202.2.23.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SmcDosWsTrapDestEntry  

smcDosWsTrapId 1.3.6.1.4.1.202.2.23.1.1
Number of Trap Destination entry. 1 for first entry, 2 for second entry, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

smcDosWsTrapDstAdr 1.3.6.1.4.1.202.2.23.1.2
This is an IP address to which alerts (traps) should be sent when significant events occur.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

smcDosWsTrapDstPro 1.3.6.1.4.1.202.2.23.1.3
This is a code indicating the protocol to use when sending alerts. 1 means disabled, i.e. the corresponding smcDosWsTrapDstAdr variable is not really intended to receive traps. 2 means use TCP/IP protocol. 3,4,5,6 mean use IPX protocol using Ethernet II, RAW 802.2, 802.2 SNAP or 802.3 physical layer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

smcDosWsApiTrap 1.3.6.1.4.1.202.2.24
This is a string set by external applications which use the PC Agent API to send an SNMP trap
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString