SN-OSM-PRIV-MIB

File: SN-OSM-PRIV-MIB.mib (50202 bytes)

Imported modules

RFC-1215 RFC1155-SMI RFC1213-MIB
RFC-1212

Imported symbols

TRAP-TYPE enterprises IpAddress
internet TimeTicks Counter
DisplayString ifIndex OBJECT-TYPE

Defined Types

MacAddress  
OCTET STRING Size(6)    

SnNvLogEntry  
SEQUENCE    
  snNvLogPowerUpCount INTEGER
  snNvLogTime TimeTicks
  snNvLogSequenceNumber INTEGER
  snNvLogDescr DisplayString

IANAifType  
INTEGER other(1), regular1822(2), hdh1822(3), ddnX25(4), rfc877x25(5), ethernetCsmacd(6), iso88023Csmacd(7), iso88024TokenBus(8), iso88025TokenRing(9), iso88026Man(10), starLan(11), proteon10Mbit(12), proteon80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frameRelay(32), rs232(33), para(34), arcnet(35), arcnetPlus(36), atm(37), miox25(38), sonet(39), x25ple(40), iso88022llc(41), localTalk(42), smdsDxi(43), frameRelayService(44), v35(45), hssi(46), hippi(47), modem(48), aal5(49), sonetPath(50), sonetVT(51), smdsIcip(52), propVirtual(53), propMultiplexor(54)    

SnTrapEntry  
SEQUENCE    
  snTrapAddress IpAddress
  snTrapState INTEGER
  snTrapIndex INTEGER

SnOsmPortEntry  
SEQUENCE    
  snOsmPortIndex INTEGER
  snOsmPortFaultMaskState INTEGER
  snOsmPortStandbyMaskState INTEGER
  snOsmPortLockState INTEGER
  snOsmPortPartitionState INTEGER
  snOsmPortBackPressure INTEGER

SnOsmEventEntry  
SEQUENCE    
  snOsmEventIndex INTEGER
  snOsmEventColdWarmStart INTEGER
  snOsmEventLinkChange INTEGER
  snOsmEventAuthenticationFailure INTEGER
  snOsmEventRmonAlarm INTEGER
  snOsmEventPowerChange INTEGER
  snOsmEventRmStateChange INTEGER
  snOsmEventStandbyStateChange INTEGER
  snOsmEventFault INTEGER

SnOsmDigitalInEventEntry  
SEQUENCE    
  snOsmDigitalInIndex INTEGER
  snOsmDigitalInName DisplayString
  snOsmDigitalInMailEvent INTEGER
  snOsmDigitalInTrapEvent INTEGER
  snOsmDigitalInLogEvent INTEGER
  snOsmDigitalInState INTEGER

Defined Values


adProductMibs 1.3.6.1.4.1.4196.1
OBJECT IDENTIFIER    

simaticNet 1.3.6.1.4.1.4196.1.1
OBJECT IDENTIFIER    

iHub 1.3.6.1.4.1.4196.1.1.1
OBJECT IDENTIFIER    

iSwitch 1.3.6.1.4.1.4196.1.1.2
OBJECT IDENTIFIER    

snOsmItp62 1.3.6.1.4.1.4196.1.1.2.1
OBJECT IDENTIFIER    

snOsmItp53 1.3.6.1.4.1.4196.1.1.2.2
OBJECT IDENTIFIER    

snOsmItpLd62 1.3.6.1.4.1.4196.1.1.2.3
OBJECT IDENTIFIER    

snEsmItp80 1.3.6.1.4.1.4196.1.1.2.4
OBJECT IDENTIFIER    

snOsmTp62 1.3.6.1.4.1.4196.1.1.2.5
OBJECT IDENTIFIER    

snEsmTp80 1.3.6.1.4.1.4196.1.1.2.6
OBJECT IDENTIFIER    

snOsmBC08 1.3.6.1.4.1.4196.1.1.2.7
OBJECT IDENTIFIER    

snOsmTpLd62 1.3.6.1.4.1.4196.1.1.2.8
OBJECT IDENTIFIER    

snOsmTp22 1.3.6.1.4.1.4196.1.1.2.9
OBJECT IDENTIFIER    

snEsmTp40 1.3.6.1.4.1.4196.1.1.2.10
OBJECT IDENTIFIER    

snOsmTp62-Advanced 1.3.6.1.4.1.4196.1.1.2.11
OBJECT IDENTIFIER    

snEsmItp80-Advanced 1.3.6.1.4.1.4196.1.1.2.12
OBJECT IDENTIFIER    

snEsmTp80-Advanced 1.3.6.1.4.1.4196.1.1.2.13
OBJECT IDENTIFIER    

snOsmItpLd62-Advanced 1.3.6.1.4.1.4196.1.1.2.14
OBJECT IDENTIFIER    

snOsmItp62-Advanced 1.3.6.1.4.1.4196.1.1.2.15
OBJECT IDENTIFIER    

snOsmItp53-Advanced 1.3.6.1.4.1.4196.1.1.2.16
OBJECT IDENTIFIER    

snOsmTp53 1.3.6.1.4.1.4196.1.1.2.17
OBJECT IDENTIFIER    

iSwitchMib 1.3.6.1.4.1.4196.1.1.2.100
OBJECT IDENTIFIER    

snCommon 1.3.6.1.4.1.4196.1.1.2.100.1
OBJECT IDENTIFIER    

snProductSpecific 1.3.6.1.4.1.4196.1.1.2.100.2
OBJECT IDENTIFIER    

snDownload 1.3.6.1.4.1.4196.1.1.2.100.1.5
OBJECT IDENTIFIER    

snNvLog 1.3.6.1.4.1.4196.1.1.2.100.1.6
OBJECT IDENTIFIER    

snTrapInfo 1.3.6.1.4.1.4196.1.1.2.100.1.7
OBJECT IDENTIFIER    

snGen 1.3.6.1.4.1.4196.1.1.2.100.1.8
OBJECT IDENTIFIER    

snTcpip 1.3.6.1.4.1.4196.1.1.2.100.1.10
OBJECT IDENTIFIER    

snOsm 1.3.6.1.4.1.4196.1.1.2.100.2.1
OBJECT IDENTIFIER    

snDownloadParams 1.3.6.1.4.1.4196.1.1.2.100.1.5.1
OBJECT IDENTIFIER    

snDownloadParamsTftpServerHostName 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.2
IP address of the TFTP server (x.y.z.w).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

snDownloadParamsFile 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.3
Full path name of file to be loaded from the TFTP server host. Note that the file name must have the appropriate syntax for the TFTP server host. E.g., if the TFTP server host is a UNIX machine, the full file name might be /tftp/name.lad, or if the TFTP server host is a Windows machine, the full file name might be C: ftp ame.lad.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

snDownloadParamsControl 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.4
Setting this object to start-load(2) causes the system to start a downloading process. Setting this object to cancel-load(3) causes the system to abort a downloading process. If ParamsProtocol is the object is not writable. Reading the object, meaning-less(127) is returned.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER start-load(2), cancel-load(3)  

snDownloadParamsStatus 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.5
The status of the TFTP client.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER load-in-progress(2), load-inactive(3), load-interrupted(4)  

snDownloadNextBlockId 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.6
The number of the next block ID expected by the TFTP session. Block ID's are numbers starting with 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snDownloadParamsError 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.7
The error status of the TFTP client.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

snDownloadAutoLoad 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.8
The value enabled(1) will automatically start TFTP when the Operative Program is invalid. The value disabled(2) will inhibit TFTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snDownloadEventLogTableFile 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.9
Full path name of file to be saved to the TFTP server host. Note that the file name must have the appropriate syntax for the TFTP server host. E.g., if the TFTP server host is a UNIX machine, the full file name might be /tftp/name.txt, or if the TFTP server host is a Windows machine, the full file name might be C: ftp ame.txt.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

snDownloadEventLogTableControl 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.10
Setting this object to start-save(3) causes the system to start a uploading process. Setting this object to cancel-(4) causes the system to abort a uploading process. If ParamsProtocol is the object is not writable. Reading the object, meaning-less(127) is returned.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER start-load(2), start-save(3), cancel(4), continue-process(5), abort-process(6)  

snDownloadConfigFile 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.11
Full path name of file to be saved or loaded from the TFTP server host. Note that the file name must have the appropriate syntax for the TFTP server host. E.g., if the TFTP server host is a UNIX machine, the full file name might be /tftp/name.txt, or if the TFTP server host is a Windows machine, the full file name might be C: ftp ame.txt.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

snDownloadConfigControl 1.3.6.1.4.1.4196.1.1.2.100.1.5.1.12
Setting this object to start-load(2) causes the system to start a downloading process. Setting this object to start-save(3) causes the system to start a uploading process. Setting this object to cancel-(4) causes the system to abort the process. If ParamsProtocol is the object is not writable. Reading the object, meaning-less(127) is returned.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER start-load(2), start-save(3), cancel(4), continue-process(5), abort-process(6)  

snNvLogMaxEntries 1.3.6.1.4.1.4196.1.1.2.100.1.6.1
Maximum number of events that can be kept in Non-Volatile Memory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..400  

snNvLogCurrentEntries 1.3.6.1.4.1.4196.1.1.2.100.1.6.2
Number of events that are currently kept in Non-Volatile Memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snNvLogNewEntries 1.3.6.1.4.1.4196.1.1.2.100.1.6.3
Counter for events that are logged in Non-Volatile Memory. This counter starts at 0 after each system start. User can reset this counter at any time by writing 0 to this object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snNvLogClear 1.3.6.1.4.1.4196.1.1.2.100.1.6.4
Setting this object to clear(1) value, clears the events that are kept in Non-Volatile Memory.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clear(1)  

snNvLogTable 1.3.6.1.4.1.4196.1.1.2.100.1.6.5
The table contains the last events that occurred in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnNvLogEntry

snNvLogEntry 1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1
The description of an event that occurred in the system, and was stored in Non-Volatile memory.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnNvLogEntry  

snNvLogPowerUpCount 1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1.1
The number of times the system was powered up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snNvLogTime 1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1.2
The sysUpTime of the system when the event occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snNvLogSequenceNumber 1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1.3
The sequence number of the log entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snNvLogDescr 1.3.6.1.4.1.4196.1.1.2.100.1.6.5.1.4
ASCII description of the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..256)  

snNvLogPositionDescr 1.3.6.1.4.1.4196.1.1.2.100.1.6.6
Read - find the oid of the entry with spezial number in log table. Write - set the entry number in log table for the read request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

snmpV2 1.3.6.1.6
OBJECT IDENTIFIER    

snmpModules 1.3.6.1.6.3
OBJECT IDENTIFIER    

snmpMIB 1.3.6.1.6.3.1
OBJECT IDENTIFIER    

snmpMIBObjects 1.3.6.1.6.3.1.1
OBJECT IDENTIFIER    

snmpTraps 1.3.6.1.6.3.1.1.5
OBJECT IDENTIFIER    

snSwitchTrapsEnable 1.3.6.1.4.1.4196.1.1.2.100.1.7.1
Determines whether this device will transmit traps to SNMP management stations. This if this object is set to disable, no traps will be sent. Setting this object to enabled is a necessary, but not a sufficient condition for transmission of traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-supported(10), enabled(1), disabled(2)  

snTrapTimeLastGenerated 1.3.6.1.4.1.4196.1.1.2.100.1.7.5
The value of sysUpTime at the time the last trap was generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

snTrapMaxManagers 1.3.6.1.4.1.4196.1.1.2.100.1.7.6
The maximum number of managers that can be registered for receiving traps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snTrapTable 1.3.6.1.4.1.4196.1.1.2.100.1.7.7
This table contains information about the managers to which traps should be directed. Setting the snTrapState to inactive(3) removes the corresponding entry from the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnTrapEntry

snTrapEntry 1.3.6.1.4.1.4196.1.1.2.100.1.7.7.1
This object contains runtime information about an individual trap destination.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnTrapEntry  

snTrapAddress 1.3.6.1.4.1.4196.1.1.2.100.1.7.7.1.1
The IP address of the network management entity to which traps should be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snTrapState 1.3.6.1.4.1.4196.1.1.2.100.1.7.7.1.3
The state of this entry in the trap address table. Setting this object to inactive(3) removes the corresponding entry from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), active(2), inactive(3)  

snTrapIndex 1.3.6.1.4.1.4196.1.1.2.100.1.7.7.1.6
The Index of Trap Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snUserDescription 1.3.6.1.4.1.4196.1.1.2.100.1.8.1
Extended description of the station including user specific information. This value is used for the email From-field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

snHwVersion 1.3.6.1.4.1.4196.1.1.2.100.1.8.2
The hardware version of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

snBootStrapVersion 1.3.6.1.4.1.4196.1.1.2.100.1.8.3
The firmware version of the boot software installed in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

snSwVersion 1.3.6.1.4.1.4196.1.1.2.100.1.8.4
The firmware version of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

snInfoOrderNr 1.3.6.1.4.1.4196.1.1.2.100.1.8.6
The order number of this product.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

snSerialPortSpeed 1.3.6.1.4.1.4196.1.1.2.100.1.8.8
The serial port speed in bits per second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), o9600bps(5), o19200bps(6), o38400bps(7), o115200bps(9)  

snSwitchTelnetEnable 1.3.6.1.4.1.4196.1.1.2.100.1.8.9
Enable/Disable TELNET access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-supported(10), enabled(1), disabled(2)  

snSwitchTelnetTimeOutEnable 1.3.6.1.4.1.4196.1.1.2.100.1.8.10
Enables or disables the time out for a TELNET session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snSwitchTelnetTimeOut 1.3.6.1.4.1.4196.1.1.2.100.1.8.11
Time out for the TELNET session. The time could be set in steps of 10 seconds. Minimum value is 60 seconds, maximum value is 600 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 60..600  

snSwitchSNMPEnable 1.3.6.1.4.1.4196.1.1.2.100.1.8.12
Determines whether this device may be accessed by SNMP management stations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-supported(10), enabled(1), disabled(2)  

snSysReset 1.3.6.1.4.1.4196.1.1.2.100.1.8.13
Resets the system. cold-reset(1) is identical to Power-On-Reset or Watchdog-Reset. warm-reset(2) is identical to restart command.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER cold-reset(1), warm-reset(2)  

snResetPowerUpCount 1.3.6.1.4.1.4196.1.1.2.100.1.8.14
The number of times the sytem was powered up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snSetFactoryDefs 1.3.6.1.4.1.4196.1.1.2.100.1.8.15
Restore factory defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER set-factory-defaults(1), set-factory-defaults-complete(2)  

snResetCounters 1.3.6.1.4.1.4196.1.1.2.100.1.8.16
Reset all statistic counters.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset-counters(1)  

snEraseDataStoreFlash 1.3.6.1.4.1.4196.1.1.2.100.1.8.17
Erase all configuration data and log table entries. In opposite to reset to factory defaults nothing is saved.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER erase-datastore(1)  

snSetMemoryDefs 1.3.6.1.4.1.4196.1.1.2.100.1.8.18
Restore memory defaults and restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER set-memory-defaults(1), set-memory-defaults-complete(2)  

snEmailSMTPIpAddress 1.3.6.1.4.1.4196.1.1.2.100.1.8.20
IP address or host name of SMTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snEmailSMTPPort 1.3.6.1.4.1.4196.1.1.2.100.1.8.21
Number of TCP port to which the SMTP server will listen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

snEmailEnable 1.3.6.1.4.1.4196.1.1.2.100.1.8.22
E-mail functionality for sending a message when an event occurred.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snEmailAddress 1.3.6.1.4.1.4196.1.1.2.100.1.8.23
E-mail address to which messages will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

snIpAddress 1.3.6.1.4.1.4196.1.1.2.100.1.10.2
IP address of the agent. Changes become valid after restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snIpSubnetMask 1.3.6.1.4.1.4196.1.1.2.100.1.10.3
IP subnet mask of the agent. Changes become valid after restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snIpDefaultGateway 1.3.6.1.4.1.4196.1.1.2.100.1.10.4
IP address of the default gateway. Changes become valid after restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snBootP 1.3.6.1.4.1.4196.1.1.2.100.1.10.5
Enable/Disable BOOTP. Changes become valid after restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snMacAddressBase 1.3.6.1.4.1.4196.1.1.2.100.1.10.10
MAC address of the switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

snOsmFaultState 1.3.6.1.4.1.4196.1.1.2.100.2.1.2
Indicates OSM/ESM fault state (state of fault LED/signaling contact).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noFault(1), fault(2)  

snOsmSignalledFaults 1.3.6.1.4.1.4196.1.1.2.100.2.1.3
Number of signalled faults.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOsmFaultValue 1.3.6.1.4.1.4196.1.1.2.100.2.1.4
Fault value: 0 = no fault, bit 0 = power, bit 1 = linkdown, bit 2 = internal error, bit 3 = standby, bit 4 = rm, bit 5 = dip switch rm, bit 6 = dip switch standby, bit 7 = ncm, bit 8 = partition port 1, ... bit 15 = partition port 8, bit 16 = observer error, bit 17 = non-recoverable ring error, bit 18 = reset to factory defaults
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

snOsmDigitalInputChange 1.3.6.1.4.1.4196.1.1.2.100.2.1.5
Digital Input change
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

snOsmDigitalInputState 1.3.6.1.4.1.4196.1.1.2.100.2.1.6
Digital Input state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOsmRmMode 1.3.6.1.4.1.4196.1.1.2.100.2.1.11
RM mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rmOff(1), rmOn(2)  

snOsmRmState 1.3.6.1.4.1.4196.1.1.2.100.2.1.12
RM State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rmPassive(1), rmActive(2)  

snOsmRmStateChanges 1.3.6.1.4.1.4196.1.1.2.100.2.1.13
Number of changes to RM active state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOsmRmObserverMode 1.3.6.1.4.1.4196.1.1.2.100.2.1.14
Reserved for further use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), restart(3), not-supported(10)  

snOsmStandbyMode 1.3.6.1.4.1.4196.1.1.2.100.2.1.21
Standby Mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER standbyOff(1), standbyOn(2), not-supported(10)  

snOsmStandbyState 1.3.6.1.4.1.4196.1.1.2.100.2.1.22
Standby State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER standbyPassive(1), standbyActive(2), not-supported(10)  

snOsmStandbyCableState 1.3.6.1.4.1.4196.1.1.2.100.2.1.24
Standby cable state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), disconnected(2), not-supported(10)  

snOsmStandbyStateChanges 1.3.6.1.4.1.4196.1.1.2.100.2.1.25
Number of changes to standby active state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOsmPort7TestMac 1.3.6.1.4.1.4196.1.1.2.100.2.1.31
MAC (source) address of test telegrams sent on port 7.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

snOsmPort8TestMac 1.3.6.1.4.1.4196.1.1.2.100.2.1.32
MAC (source) address of test telegrams sent on port 8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

snOsmMulticastTestMac 1.3.6.1.4.1.4196.1.1.2.100.2.1.33
MAC multicast address used for redundancy functions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

snOsmMulticastLinkMac 1.3.6.1.4.1.4196.1.1.2.100.2.1.34
MAC multicast address used for redundancy functions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

snOsmUnicastLinkMac 1.3.6.1.4.1.4196.1.1.2.100.2.1.35
MAC unicast address used for redundancy functions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

snOsmMulticastSyncMac 1.3.6.1.4.1.4196.1.1.2.100.2.1.36
MAC multicast address of time synchronisation packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

snOsmMulticastFlowControlMac 1.3.6.1.4.1.4196.1.1.2.100.2.1.37
MAC multicast address of flow control packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

snOsmTestMaxDelay 1.3.6.1.4.1.4196.1.1.2.100.2.1.38
Measured maximum delay of RM test telegrams.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..200  

snOsmPowerSupply1State 1.3.6.1.4.1.4196.1.1.2.100.2.1.41
State of power supply line 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

snOsmPowerSupply2State 1.3.6.1.4.1.4196.1.1.2.100.2.1.42
State of power supply line 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

snOsmPowerSupply1Mask 1.3.6.1.4.1.4196.1.1.2.100.2.1.43
Mask of power supply line 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmPowerSupply2Mask 1.3.6.1.4.1.4196.1.1.2.100.2.1.44
Mask of power supply line 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmChangedPowerLine 1.3.6.1.4.1.4196.1.1.2.100.2.1.45
The power line where the last Power-Up or -Down occurred. User can reset to initial value 0 at any time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nochange(0), line1(1), line2(2)  

snOsmResetCounters 1.3.6.1.4.1.4196.1.1.2.100.2.1.51
Reset all counters of OSM protocol software.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(1)  

snOsmPortTable 1.3.6.1.4.1.4196.1.1.2.100.2.1.61
Table containing per-port objects in the form of private extensions of interface objects.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOsmPortEntry

snOsmPortEntry 1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1
Interface entry containing objects at the subnetwork layer and below for a particular interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOsmPortEntry  

snOsmPortIndex 1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.1
Unique number for each interface. The number is in the range 1 to ifNumber. The number for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

snOsmPortFaultMaskState 1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.2
Mask for checking link state of the port. If a link of a unmasked (checked) port is down then a fault will be generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmPortStandbyMaskState 1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.3
Mask for standby ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmPortLockState 1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.4
Lock state of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

snOsmPortPartitionState 1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.5
Partition state of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noPartition(1), partition(2)  

snOsmPortBackPressure 1.3.6.1.4.1.4196.1.1.2.100.2.1.61.1.6
Back pressure mode for the half-duplex port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snOsmRmActiveState 11
Redundancy manager entered active state.
TRAP-TYPE    

snOsmRmPassiveState 12
Redundancy manager entered passive state.
TRAP-TYPE    

snOsmStandbyActiveState 21
Device entered standby active state.
TRAP-TYPE    

snOsmStandbyPassiveState 22
Device entered standby passive state.
TRAP-TYPE    

snOsmPowerLineDown 31
Power down on line .
TRAP-TYPE    

snOsmPowerLineUp 32
Power up on line .
TRAP-TYPE    

snOsmFault 41
Device entered fault state.
TRAP-TYPE    

snOsmDigitalInput 51
Digital Input state changed.
TRAP-TYPE    

snOsmEventTable 1.3.6.1.4.1.4196.1.1.2.100.2.1.62
Event configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOsmEventEntry

snOsmEventEntry 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1
Events table rows entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOsmEventEntry  

snOsmEventIndex 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.1
Index of columns : E-Mail = 1, Traps = 2, LogTable = 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER eMail(1), trap(2), logTabel(3)  

snOsmEventColdWarmStart 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.2
Enables/Disables cold/warm start notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmEventLinkChange 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.3
Enables/Disables link change notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmEventAuthenticationFailure 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.4
Enables/Disables authentication failure notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmEventRmonAlarm 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.5
Enables/Disables RMon alarm notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmEventPowerChange 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.6
Enables/Disables power change notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmEventRmStateChange 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.7
Enables/Disables RM state change notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmEventStandbyStateChange 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.8
Enables/Disables standby state change notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmEventFault 1.3.6.1.4.1.4196.1.1.2.100.2.1.62.1.9
Enables/Disables fault notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2)  

snOsmDigitalInEventTable 1.3.6.1.4.1.4196.1.1.2.100.2.1.63
Digital-In event configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOsmDigitalInEventEntry

snOsmDigitalInEventEntry 1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1
Digital-In events table rows entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOsmDigitalInEventEntry  

snOsmDigitalInIndex 1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.1
Index of Digital-In.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOsmDigitalInName 1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.2
Name of Digital-In.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

snOsmDigitalInMailEvent 1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.3
Enables/Disables Digital-In E-Mail notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2), notSupported(3)  

snOsmDigitalInTrapEvent 1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.4
Enables/Disables Digital-In Trap notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2), notSupported(3)  

snOsmDigitalInLogEvent 1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.5
Enables/Disables Digital-In LogTable notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER checked(1), notChecked(2), notSupported(3)  

snOsmDigitalInState 1.3.6.1.4.1.4196.1.1.2.100.2.1.63.1.6
State of the Digital-In.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notSupported(3)  

snConfigId 1.3.6.1.4.1.4196.1.1.2.100.2.1.100
OSM/ESM hardware type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER osmItp62(0), osmItp53(1), osmTp62(2), esmItp80(3), esmTp80(4), osmItpLd62(5), osmTpLd62(6), osmBC08(7), osmTp22(8), esmTp40(9), osmTp62-Advanced(10), esmItp80-Advanced(11), esmTp80-Advanced(12), osmItpLd62-Advanced(13), osmItp62-Advanced(14), osmItp53-Advanced(15), osmTp53(16)  

snSwitchFlowControl 1.3.6.1.4.1.4196.1.1.2.100.2.1.101
Enable/Disable flow control functionality.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snSwitchSnifferSrc 1.3.6.1.4.1.4196.1.1.2.100.2.1.102
Source port for traffic mirroring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snSwitchSnifferDest 1.3.6.1.4.1.4196.1.1.2.100.2.1.103
Destination port for traffic mirroring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snSwitchSnifferEnable 1.3.6.1.4.1.4196.1.1.2.100.2.1.104
Enable/Disable mirroring functionality.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snSwitchAgingEnable 1.3.6.1.4.1.4196.1.1.2.100.2.1.105
Enable/Disable auto-aging functionality of the learning table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snSwitchRmonMode 1.3.6.1.4.1.4196.1.1.2.100.2.1.106
Enable/Disable RMon functionality (statistics, history, alarm, events).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-supported(10)  

snSwitchFdbImagePollTime 1.3.6.1.4.1.4196.1.1.2.100.2.1.107
Polling time for update of learning table image.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..600  

snSwitchLearningTableEntries 1.3.6.1.4.1.4196.1.1.2.100.2.1.108
Number of entries in learning table image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snSwitchTimeToNextDataStore 1.3.6.1.4.1.4196.1.1.2.100.2.1.109
Time in seconds, when the next saving of configuration data and log entries takes place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snSwitchFlushDataStore 1.3.6.1.4.1.4196.1.1.2.100.2.1.110
Force direct saving of configuration data and log entries.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER flush(1)  

snLastObject 1.3.6.1.4.1.4196.1.1.2.100.999
This object is defined as a dummy object. The object is used to indicate that no other objects can appear after it in this private MIB. The only purpose of this object is for MIB browsers that need a valid object at the end of a private MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER last-object(1)