SNI-MYLEX-MIB

Imported modules

RFC1212-MIB	RFC-1215	RFC1213-MIB
RFC1155-SMI

Imported symbols

OBJECT-TYPE	TRAP-TYPE	DisplayString
Counter	Gauge	enterprises

Defined Types

MylexAdapterHost
SEQUENCE
	mylexAdapterNum	INTEGER
	mylexAdapterHostTargetId	INTEGER
	mylexAdapterHostChannelNumber	INTEGER
	mylexAdapterHostControllerNumber	INTEGER

MylexAdapterInfoEntry
SEQUENCE
	mylexAdapterInfoId	INTEGER
	mylexModel	DisplayString
	mylexCacheSize	INTEGER
	mylexBaseAddress	INTEGER
	mylexBusType	INTEGER
	mylexInterruptIRQ	INTEGER
	mylexFirmwareVersion	DisplayString
	mylexBIOSVersion	DisplayString
	mylexDefaultRebuildRate	INTEGER
	mylexNumChannels	Gauge
	mylexMaxChannels	INTEGER
	mylexNumLogicalDrives	Gauge
	mylexMaxLogicalDrives	INTEGER
	mylexNumPhysicalDevices	Gauge
	mylexMaxPhysicalDevices	INTEGER
	mylexStripeSize	INTEGER
	mylexFlashEEpromSize	INTEGER
	mylexPhysicalSectorSize	INTEGER
	mylexLogicalSectorSize	INTEGER
	mylexSlotNumber	INTEGER
	mylexVendorName	DisplayString

MylexPhysicalDeviceInfoEntry
SEQUENCE
	mylexPhysicalDeviceAdapterId	INTEGER
	mylexPhysicalDeviceChannelNr	INTEGER
	mylexPhysicalDeviceDevNr	INTEGER
	mylexPhysicalDeviceModel	DisplayString
	mylexPhysicalDeviceCapacity	INTEGER
	mylexPhysicalDeviceStatus	INTEGER
	mylexPhysicalDeviceRebuildRate	INTEGER
	mylexPhysicalDeviceParityErrors	Counter
	mylexPhysicalDeviceSoftErrors	Counter
	mylexPhysicalDeviceHardErrors	Counter
	mylexPhysicalDeviceMiscErrors	Counter
	mylexPhysicalDeviceDiskConfigured	INTEGER
	mylexPhysicalDeviceScsiDeviceType	INTEGER
	mylexPhysicalDeviceParamFastScsi	INTEGER
	mylexPhysicalDeviceParamWideScsi	INTEGER
	mylexPhysicalDeviceParamTaggedQueueing	INTEGER
	mylexPhysicalDeviceSmartCompliant	INTEGER
	mylexPhysicalDeviceSmartMonitoring	INTEGER
	mylexPhysicalDeviceSmartStatus	INTEGER

MylexLogicalInfoEntry
SEQUENCE
	mylexLogicalInfoAdapterId	INTEGER
	mylexLogicalInfoLogDrvNum	INTEGER
	mylexLogicalInfoStatus	INTEGER
	mylexLogicalInfoSize	INTEGER
	mylexLogicalInfoTotalSize	INTEGER
	mylexLogicalInfoRaidLevel	INTEGER
	mylexLogicalInfoWriteBack	INTEGER

MylexLogicalDriveContentsEntry
SEQUENCE
	mylexLogicalDriveContentsAdapterId	INTEGER
	mylexLogicalDriveContentsLogDrvNum	INTEGER
	mylexLogicalDriveContentsPhysIndex	INTEGER
	mylexLogicalDriveContentsChannelNr	INTEGER
	mylexLogicalDriveContentsPhysDevNr	INTEGER

MylexAdapterGeneralStatusEntry
SEQUENCE
	mylexAdapterGeneralStatusAdapterId	INTEGER
	mylexAdapterGeneralStatus	INTEGER

Defined Values

sni		1.3.6.1.4.1.231
OBJECT IDENTIFIER

sniProductMibs		1.3.6.1.4.1.231.2
OBJECT IDENTIFIER

sniExtensions		1.3.6.1.4.1.231.2.10
OBJECT IDENTIFIER

sniServerMgmt		1.3.6.1.4.1.231.2.10.2
OBJECT IDENTIFIER

sniInventory		1.3.6.1.4.1.231.2.10.2.1
OBJECT IDENTIFIER

sniCommon		1.3.6.1.4.1.231.2.10.2.2
OBJECT IDENTIFIER

sniBios		1.3.6.1.4.1.231.2.10.2.2.1
OBJECT IDENTIFIER

sniEisa		1.3.6.1.4.1.231.2.10.2.2.2
OBJECT IDENTIFIER

sniHd		1.3.6.1.4.1.231.2.10.2.2.3
OBJECT IDENTIFIER

sniBus		1.3.6.1.4.1.231.2.10.2.2.4
OBJECT IDENTIFIER

sniServerControl		1.3.6.1.4.1.231.2.10.2.2.5
OBJECT IDENTIFIER

sniPcSpecific		1.3.6.1.4.1.231.2.10.2.3
OBJECT IDENTIFIER

sniScb		1.3.6.1.4.1.231.2.10.2.4
OBJECT IDENTIFIER

sniOsSpecific		1.3.6.1.4.1.231.2.10.2.5
OBJECT IDENTIFIER

sniNetware		1.3.6.1.4.1.231.2.10.2.5.1
OBJECT IDENTIFIER

sniWinNt		1.3.6.1.4.1.231.2.10.2.5.2
OBJECT IDENTIFIER

sniOs2		1.3.6.1.4.1.231.2.10.2.5.3
OBJECT IDENTIFIER

sniUnix		1.3.6.1.4.1.231.2.10.2.5.4
OBJECT IDENTIFIER

sniOemComponents		1.3.6.1.4.1.231.2.10.2.6
OBJECT IDENTIFIER

sniOemDpt		1.3.6.1.4.1.231.2.10.2.6.1
OBJECT IDENTIFIER

sniOemMylex		1.3.6.1.4.1.231.2.10.2.6.2
OBJECT IDENTIFIER

sniMlxDiskArray		1.3.6.1.4.1.231.2.10.2.6.2.1
OBJECT IDENTIFIER

sniSecurity		1.3.6.1.4.1.231.2.10.2.7
OBJECT IDENTIFIER

sniSmSecurity		1.3.6.1.4.1.231.2.10.2.7.1
OBJECT IDENTIFIER

sniServerView		1.3.6.1.4.1.231.2.10.2.8
OBJECT IDENTIFIER

sniTrapMib		1.3.6.1.4.1.231.2.10.5
OBJECT IDENTIFIER

sniMylexAgentInfo		1.3.6.1.4.1.231.2.10.2.6.2.1.1
OBJECT IDENTIFIER

mylexAgentId		1.3.6.1.4.1.231.2.10.2.6.2.1.1.1
Mylex SNMP agent ID string
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexAgentCompany		1.3.6.1.4.1.231.2.10.2.6.2.1.1.2
Mylex SNMP agent company string
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexAgentVersion		1.3.6.1.4.1.231.2.10.2.6.2.1.1.3
Mylex SNMP agent version string
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexAgentBuild		1.3.6.1.4.1.231.2.10.2.6.2.1.1.4
Mylex SNMP agent build date and time string
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexAgentVersionMajor		1.3.6.1.4.1.231.2.10.2.6.2.1.1.5
Mylex SNMP agent major version number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexAgentVersionMinor		1.3.6.1.4.1.231.2.10.2.6.2.1.1.6
Mylex SNMP agent minor version number (to be displayed with 2 digits)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexApiLastErrorMsg		1.3.6.1.4.1.231.2.10.2.6.2.1.1.7
Message string of last error occurred with Mylex API
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexApiRelease		1.3.6.1.4.1.231.2.10.2.6.2.1.1.8
Mylex API library release number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexApiRevision		1.3.6.1.4.1.231.2.10.2.6.2.1.1.9
Mylex API library revision number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexAdapterHostTable		1.3.6.1.4.1.231.2.10.2.6.2.1.2
Mylex adapter host information table. Only for SCSI-to-SCSI adapters (DAC960SX). Defines for each Mylex adapter to which host controller, bus and target the adapter is connected to.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MylexAdapterHost

mylexAdapterHost		1.3.6.1.4.1.231.2.10.2.6.2.1.2.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MylexAdapterHost

mylexAdapterNum		1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.1
Adapter number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexAdapterHostTargetId		1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.2
Target ID of the Mylex SCSI-to-SCSI Adapter. Will be 0xFFFF for local adapters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexAdapterHostChannelNumber		1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.3
SCSI host channel number the Mylex SCSI-to-SCSI Adapter is connected to; will be 0 for local adapters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexAdapterHostControllerNumber		1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.4
SCSI host controller number the Mylex SCSI-to-SCSI Adapter is connected to; will be 0 for local adapters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexAdapterInfoTable		1.3.6.1.4.1.231.2.10.2.6.2.1.3
Mylex Adapter Info table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MylexAdapterInfoEntry

mylexAdapterInfoEntry		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1
Mylex Adapter Info table entry
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MylexAdapterInfoEntry

mylexAdapterInfoId		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.1
Adapter number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexModel		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.2
Adapter model/submodel
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexCacheSize		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.3
Size of cache RAM module (kBytes); -1 if unknown
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexBaseAddress		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.4
I/O base address (-1 if unknown)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexBusType		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.9
Bus type (EISA/MCAS/PCI ...)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	isa(1), eisa(2), mcas(3), turbo(4), pci(5), scsi(6), other(99)

mylexInterruptIRQ		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.10
Interrupt request line (IRQ); -1 if unknown
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexFirmwareVersion		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.11
Firmware version
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexBIOSVersion		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.12
BIOS version
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexDefaultRebuildRate		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.13
Default rebuild/check rate (%)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexNumChannels		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.14
Current number of channels
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mylexMaxChannels		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.15
Maximum number of channels
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexNumLogicalDrives		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.16
Current number of logical drives
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mylexMaxLogicalDrives		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.17
Maximum logical drives
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexNumPhysicalDevices		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.18
Current number of physical devices
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

mylexMaxPhysicalDevices		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.19
Maximum physical devices
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexStripeSize		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.20
Stripe Size (8K chunks)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexFlashEEpromSize		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.21
Size of flash EEPROM (kBytes)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexPhysicalSectorSize		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.22
Size of a physical sector (Bytes)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalSectorSize		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.23
Size of logical sector (Bytes)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexSlotNumber		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.24
Slot number the adapter is in
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexVendorName		1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.25
Name of the adapter vendor
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexPhysicalDeviceInfoTable		1.3.6.1.4.1.231.2.10.2.6.2.1.4
Physical device info table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MylexPhysicalDeviceInfoEntry

mylexPhysicalDeviceInfoEntry		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1
Physical device info table entry
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MylexPhysicalDeviceInfoEntry

mylexPhysicalDeviceAdapterId		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.1
Adapter number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexPhysicalDeviceChannelNr		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.2
Channel number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexPhysicalDeviceDevNr		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.3
Physical device number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexPhysicalDeviceModel		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.5
Physical device model name
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

mylexPhysicalDeviceCapacity		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.6
Disk capacity (MBytes; only for configured DAC disks)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexPhysicalDeviceStatus		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.7
Disk status (only for configured DAC disks)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	dead(1), online(2), standby(3), rebuild(4), unknown(9)

mylexPhysicalDeviceRebuildRate		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.8
Rebuild rate (only for configured DAC disks)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexPhysicalDeviceParityErrors		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.9
Parity error count (only for configured DAC disks)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mylexPhysicalDeviceSoftErrors		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.10
Soft error count (only for configured DAC disks)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mylexPhysicalDeviceHardErrors		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.11
Hardware error count (only for configured DAC disks)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mylexPhysicalDeviceMiscErrors		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.12
Miscellaneous error count (only for configured DAC disks)
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mylexPhysicalDeviceDiskConfigured		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.13
Device is a configured DAC disk
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

mylexPhysicalDeviceScsiDeviceType		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.14
SCSI device type
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disk(1), tape(2), printer(3), processor(4), writeOnce(5), cdRom(6), scanner(7), optical(8), jukebox(9), commDev(10), host(98), unknown(99)

mylexPhysicalDeviceParamFastScsi		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.15
SCSI device parameter: Fast SCSI
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

mylexPhysicalDeviceParamWideScsi		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.16
SCSI device parameter: Wide SCSI
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

mylexPhysicalDeviceParamTaggedQueueing		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.17
SCSI device parameter: Tagged queueing
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

mylexPhysicalDeviceSmartCompliant		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.18
Is this device SMART (Self Monitoring Analysis and Reporting Technology) compliant? If SMART information cannot be obtained, false(2) must be reported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

mylexPhysicalDeviceSmartMonitoring		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.19
In write mode, only enable and disable are allowed. An error will be reported if you try to enable a non Smart compliant device. In read mode, not-available(3) is returned if the device is not Smart compliant. Disable will be reported, if one option or more has changed after the initial configuration of the agent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2), not-available(3)

mylexPhysicalDeviceSmartStatus		1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.20
If not SmartCompliant or SmartMonitoring disabled, not-available(3) must be reported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), failure-predicted(2), not-available(3)

mylexLogicalInfoTable		1.3.6.1.4.1.231.2.10.2.6.2.1.5
Logical drive info table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MylexLogicalInfoEntry

mylexLogicalInfoEntry		1.3.6.1.4.1.231.2.10.2.6.2.1.5.1
Logical drive info table entry
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MylexLogicalInfoEntry

mylexLogicalInfoAdapterId		1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.1
Adapter number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalInfoLogDrvNum		1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.2
Logical drive number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalInfoStatus		1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.3
Logical drive status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	online(1), critical(2), offline(3), unknown(9)

mylexLogicalInfoSize		1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.4
Actual size of drive at RAID level (MBytes)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalInfoTotalSize		1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.5
Total physical size (MBytes)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalInfoRaidLevel		1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.6
Drive RAID level
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalInfoWriteBack		1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.7
Cache write back / write through
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	writeBack(1), writeThrough(2)

mylexLogicalDriveContentsTable		1.3.6.1.4.1.231.2.10.2.6.2.1.6
Table of physical devices that belong to a logical drive
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MylexLogicalDriveContentsEntry

mylexLogicalDriveContentsEntry		1.3.6.1.4.1.231.2.10.2.6.2.1.6.1
Table entry of physical devices that belong to a logical drive
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MylexLogicalDriveContentsEntry

mylexLogicalDriveContentsAdapterId		1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.1
Adapter number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalDriveContentsLogDrvNum		1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.2
Logical drive number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalDriveContentsPhysIndex		1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.3
Physical device number belonging to this logical drive (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalDriveContentsChannelNr		1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.4
Channel number of the physical device
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexLogicalDriveContentsPhysDevNr		1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.5
SCSI Id of the physical device
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexAdapterGeneralStatusTable		1.3.6.1.4.1.231.2.10.2.6.2.1.7
Table of general adapter status
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MylexAdapterGeneralStatusEntry

mylexAdapterGeneralStatusEntry		1.3.6.1.4.1.231.2.10.2.6.2.1.7.1
Table entry of general adapter status
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MylexAdapterGeneralStatusEntry

mylexAdapterGeneralStatusAdapterId		1.3.6.1.4.1.231.2.10.2.6.2.1.7.1.1
Adapter number (index)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mylexAdapterGeneralStatus		1.3.6.1.4.1.231.2.10.2.6.2.1.7.1.2
General adapter status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), fail(2)

mylexTrapInfo		1.3.6.1.4.1.231.2.10.2.6.2.1.8
OBJECT IDENTIFIER

mylexTrapTime		1.3.6.1.4.1.231.2.10.2.6.2.1.8.1
Trap time (in seconds since 1/1/1970)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexRebuildOldDevice		1.3.6.1.4.1.231.2.10.2.6.2.1.8.2
Device number of the failed physical disk that enforced a rebuild
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexRebuildOldChannel		1.3.6.1.4.1.231.2.10.2.6.2.1.8.3
Channel number of the failed physical disk that enforced a rebuild
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexRebuildNewDevice		1.3.6.1.4.1.231.2.10.2.6.2.1.8.4
Device number of the new physical disk while rebuild
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexRebuildNewChannel		1.3.6.1.4.1.231.2.10.2.6.2.1.8.5
Channel number of the new physical disk while Rebuild
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexStatusCurrentDrive		1.3.6.1.4.1.231.2.10.2.6.2.1.8.6
Number of the current logical drive being rebuilt/checked
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexStatusCurrentDriveSize		1.3.6.1.4.1.231.2.10.2.6.2.1.8.7
Size of current logical drive being rebuilt/checked (MBytes)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexStatusBlocksRemaining		1.3.6.1.4.1.231.2.10.2.6.2.1.8.8
Blocks remaining while rebuild/check (MBytes)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexBadBlocks		1.3.6.1.4.1.231.2.10.2.6.2.1.8.9
Number of bad blocks after rebuild/check error
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexLogicalDrive		1.3.6.1.4.1.231.2.10.2.6.2.1.8.10
Logical drive number (in a logical drive trap)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexPhysDevice		1.3.6.1.4.1.231.2.10.2.6.2.1.8.11
Physical device number (in a physical device trap)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexPhysChannel		1.3.6.1.4.1.231.2.10.2.6.2.1.8.12
Physical channel number (in a physical device trap)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexTrapServerName		1.3.6.1.4.1.231.2.10.2.6.2.1.8.13
Server name this trap comes from
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString

mylexTrapSlotNumber		1.3.6.1.4.1.231.2.10.2.6.2.1.8.14
Slot number of the adapter generating this trap
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

mylexTrapString1		1.3.6.1.4.1.231.2.10.2.6.2.1.8.15
General purpose string 1 for trap parameters
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString

mylexTrapString2		1.3.6.1.4.1.231.2.10.2.6.2.1.8.16
General purpose string 2 for trap parameters
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString

mylexAutoRebuildStarted		200
Automatic rebuild was started
TRAP-TYPE

mylexManualRebuildStarted		201
Manual rebuild was started
TRAP-TYPE

mylexRebuildDone		202
Rebuild successfully completed
TRAP-TYPE

mylexRebuildCanceled		203
Rebuild cancelled
TRAP-TYPE

mylexRebuildStatus		204
Rebuild status
TRAP-TYPE

mylexRebuildError		205
Rebuild error, bad blocks detected
TRAP-TYPE

mylexRebuildNewDeviceFailed		206
Rebuild finished, new device failed
TRAP-TYPE

mylexRebuildLogicalDriveFailed		207
Rebuild finished, logical drive failed
TRAP-TYPE

mylexParityCheckStarted		208
Parity check was started
TRAP-TYPE

mylexParityCheckDone		209
Parity check successfully completed
TRAP-TYPE

mylexParityCheckCanceled		210
Parity check cancelled
TRAP-TYPE

mylexParityCheckStatus		211
Parity check status
TRAP-TYPE

mylexParityCheckError		212
Parity check error, bad blocks detected
TRAP-TYPE

mylexParityCheckLogicalDriveFailed		213
Parity check finished, logical drive failed
TRAP-TYPE

mylexLogicalDriveOffline		214
Logical drive went offline
TRAP-TYPE

mylexLogicalDriveCritical		215
Logical drive went critical
TRAP-TYPE

mylexLogicalDriveOnline		216
Logical drive went online
TRAP-TYPE

mylexPhysicalDeviceDied		217
Physical device died
TRAP-TYPE

mylexPhysicalDeviceAlive		218
Physical device online
TRAP-TYPE

mylexWriteBackError		219
Write back error
TRAP-TYPE

mylexStateChangeTableFull		220
State-change table threshold reached
TRAP-TYPE

mylexAdapterDied		221
Adapter died
TRAP-TYPE

mylexAutoRebuildStarted2		222
Automatic rebuild was started
TRAP-TYPE

mylexManualRebuildStarted2		223
Manual rebuild was started
TRAP-TYPE

mylexRebuildDone2		224
Rebuild successfully completed
TRAP-TYPE

mylexRebuildCanceled2		225
Rebuild cancelled
TRAP-TYPE

mylexRebuildError2		226
Rebuild error, bad blocks detected
TRAP-TYPE

mylexRebuildNewDeviceFailed2		227
Rebuild finished, new device failed
TRAP-TYPE

mylexRebuildLogicalDriveFailed2		228
Rebuild finished, logical drive failed
TRAP-TYPE

mylexInitializationStarted		229
System drive initialization started
TRAP-TYPE

mylexInitializationDone		230
System drive initialization done
TRAP-TYPE

mylexInitializationCanceled		231
System drive initialization canceled
TRAP-TYPE

mylexInitializationFailed		232
System drive initialization failed
TRAP-TYPE

mylexSystemDriveCreated		233
New system drive created
TRAP-TYPE

mylexSystemDriveDeleted		234
System drive deleted
TRAP-TYPE

mylexRaidExpansionStarted		235
RAID capacity expansion started
TRAP-TYPE

mylexRaidExpansionDone		236
RAID capacity expansion successfully finished
TRAP-TYPE

mylexRaidExpansionFailed		237
RAID capacity expansion failed
TRAP-TYPE

mylexSystemDriveBadBlock		238
Bad block(s) detected on system drive
TRAP-TYPE

mylexSystemDriveSizeChanged		239
System drive size was changed
TRAP-TYPE

mylexRaidTypeChanged		240
System drive RAID type was changed
TRAP-TYPE

mylexPhysicalDeviceHotspare		250
Physical device now hotspare (standby)
TRAP-TYPE

mylexPhysicalDeviceHardError		251
Physical device hard error
TRAP-TYPE

mylexPhysicalDeviceSoftError		252
Physical device soft error
TRAP-TYPE

mylexPhysicalDeviceParityError		253
Physical device parity error
TRAP-TYPE

mylexPhysicalDeviceMiscError		254
Physical device miscellaneous error
TRAP-TYPE

mylexPhysicalDevicePrefailure		255
Physical device prefailure
TRAP-TYPE

mylexPhysicalDeviceUnconfigured		256
Physical device unconfigured
TRAP-TYPE

mylexPhysicalDeviceAdded		257
Physical device added
TRAP-TYPE

mylexPhysicalDeviceRemoved		258
Physical device removed
TRAP-TYPE

mylexWriteBackError2		260
Write back error
TRAP-TYPE

mylexGamDriverMissing		261
Mylex GAM driver missing or failed to start
TRAP-TYPE

mylexGamDriverIncorrectVersion		262
Mylex GAM driver does not have the correct version
TRAP-TYPE

mylexSMARTFailurePredicted		270
Sent if a failure (S.M.A.R.T) has been predicted on a physical disk.
TRAP-TYPE

mylexSMARTConfigurationChanged		271
S.M.A.R.T configuration has been changed.
TRAP-TYPE

mylexBBUFound		275
Battery Backup Unit found
TRAP-TYPE

mylexBBUPowerLow		276
Battery Backup Unit power is low
TRAP-TYPE

mylexBBUPowerOK		277
Battery Backup Unit power is OK
TRAP-TYPE