SOCOMECPDU-MIB

File: SOCOMECPDU-MIB.mib (21592 bytes)

Imported modules

RFC1155-SMI	RFC1213-MIB	RFC-1212
RFC-1215

Imported symbols

enterprises	IpAddress	DisplayString
OBJECT-TYPE	TRAP-TYPE

Defined Values

socomec		1.3.6.1.4.1.4555
OBJECT IDENTIFIER

ups		1.3.6.1.4.1.4555.2
OBJECT IDENTIFIER

pdu		1.3.6.1.4.1.4555.2.30
OBJECT IDENTIFIER

dpduIdent		1.3.6.1.4.1.4555.2.30.1
OBJECT IDENTIFIER

dpduOutput		1.3.6.1.4.1.4555.2.30.2
OBJECT IDENTIFIER

dpduAlarm		1.3.6.1.4.1.4555.2.30.3
OBJECT IDENTIFIER

dpduEnvironment		1.3.6.1.4.1.4555.2.30.4
OBJECT IDENTIFIER

dpduTraps		1.3.6.1.4.1.4555.2.30.20
OBJECT IDENTIFIER

dpduIdentManufacturer		1.3.6.1.4.1.4555.2.30.1.1
The EnviroStation Vendor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

dpduIdentModel		1.3.6.1.4.1.4555.2.30.1.2
The PDU Model designation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

dpduIdentSerialNumber		1.3.6.1.4.1.4555.2.30.1.3
The PDU serial number
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

dpduIdentPDUFirmwareVersion		1.3.6.1.4.1.4555.2.30.1.4
The PDU firmware version
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

dpduIdentAgentSoftwareVersion		1.3.6.1.4.1.4555.2.30.1.5
The PDU NMC software version
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

dpduIdentName		1.3.6.1.4.1.4555.2.30.1.6
A string identifying the PDU. This object should be set by the administrator.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

dpduAttachedDevices		1.3.6.1.4.1.4555.2.30.1.7
A string identifying the devices attached to the output(s) of the PDU. This object should be set by the administrator.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..63)

dpduOutputFrequency		1.3.6.1.4.1.4555.2.30.2.1
The present output frequency in 1/10 Hz.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dpduOutputVoltage1		1.3.6.1.4.1.4555.2.30.2.2
The Output line 1 voltage of the PDU system in 1/10 V.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dpduOutputCurrent1		1.3.6.1.4.1.4555.2.30.2.3
The Output line 1 current of the PDU system in 1/10 A.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dpduOutputVoltage2		1.3.6.1.4.1.4555.2.30.2.4
The Output line 2 voltage of the PDU system in 1/10 V.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dpduOutputCurrent2		1.3.6.1.4.1.4555.2.30.2.5
The Output line 2 current of the PDU system in 1/10 A.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dpduOutputVoltage3		1.3.6.1.4.1.4555.2.30.2.6
The Output line 3 voltage of the PDU system in 1/10 V.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dpduOutputCurrent3		1.3.6.1.4.1.4555.2.30.2.7
The Output line 3 current of the PDU system in 1/10 A.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dpduAlarmDisconnect		1.3.6.1.4.1.4555.2.30.3.1
Does the PDU disconnect?
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL1LoadMajor		1.3.6.1.4.1.4555.2.30.3.2
L1 load major alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL1LoadMinor		1.3.6.1.4.1.4555.2.30.3.3
L1 load minor alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL1OutVoltMajor		1.3.6.1.4.1.4555.2.30.3.4
L1 output votage major alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL1OutVoltMinor		1.3.6.1.4.1.4555.2.30.3.5
L1 output voltage minor alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL2LoadMajor		1.3.6.1.4.1.4555.2.30.3.6
L2 load major alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL2LoadMinor		1.3.6.1.4.1.4555.2.30.3.7
L2 load minor alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL2OutVoltMajor		1.3.6.1.4.1.4555.2.30.3.8
L2 output votage major alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL2OutVoltMinor		1.3.6.1.4.1.4555.2.30.3.9
L2 output voltage minor alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL3LoadMajor		1.3.6.1.4.1.4555.2.30.3.10
L3 load major alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL3LoadMinor		1.3.6.1.4.1.4555.2.30.3.11
L3 load minor alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL3OutVoltMajor		1.3.6.1.4.1.4555.2.30.3.12
L3 output votage major alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL3OutVoltMinor		1.3.6.1.4.1.4555.2.30.3.13
L3 output voltage minor alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL12LoadMajor		1.3.6.1.4.1.4555.2.30.3.14
L1, L2 load major alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmL12LoadMinor		1.3.6.1.4.1.4555.2.30.3.15
L1, L2 load minor alarm
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduEnvTemperature		1.3.6.1.4.1.4555.2.30.4.1
The ambient environmental temperature.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dpduEnvHumidity		1.3.6.1.4.1.4555.2.30.4.2
The environmental humidity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

dpduEnvSetTemperatureWarnLimit		1.3.6.1.4.1.4555.2.30.4.3
Alarm dpduEnvOverWarnTemperature on when the environmental temperature over the value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dpduEnvSetTemperatureAlarmLimit		1.3.6.1.4.1.4555.2.30.4.4
Alarm dpduEnvOverAlarmTemperature on when the environmental temperature over the value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dpduEnvSetHumidityWarnLimit		1.3.6.1.4.1.4555.2.30.4.5
Alarm dpduEnvOverWarnHumidity on when the environmental humidity over the value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dpduEnvSetHumidityAlarmLimit		1.3.6.1.4.1.4555.2.30.4.6
Alarm dpduEnvOverAlarmHumidity on when the environmental humidity over the value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

dpduEnvSetEnvRelay1		1.3.6.1.4.1.4555.2.30.4.7
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normalOpen(0), normalClose(1)

dpduEnvSetEnvRelay2		1.3.6.1.4.1.4555.2.30.4.8
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normalOpen(0), normalClose(1)

dpduEnvSetEnvRelay3		1.3.6.1.4.1.4555.2.30.4.9
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normalOpen(0), normalClose(1)

dpduEnvSetEnvRelay4		1.3.6.1.4.1.4555.2.30.4.10
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normalOpen(0), normalClose(1)

dpduWarnOverEnvTemperature		1.3.6.1.4.1.4555.2.30.4.11
Does the environment over warning temperature?
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmOverEnvTemperature		1.3.6.1.4.1.4555.2.30.4.12
Does the environment over alarm temperature?
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduWarnmOverEnvHumidity		1.3.6.1.4.1.4555.2.30.4.13
Does the environment over warn humidity?
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmOverEnvHumidity		1.3.6.1.4.1.4555.2.30.4.14
Does the environment over alarm humidity?
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmEnvRelay1		1.3.6.1.4.1.4555.2.30.4.15
The alarm status of relay1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmEnvRelay2		1.3.6.1.4.1.4555.2.30.4.16
The alarm status of relay2.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmEnvRelay3		1.3.6.1.4.1.4555.2.30.4.17
The alarm status of relay3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmEnvRelay4		1.3.6.1.4.1.4555.2.30.4.18
The alarm status of relay4.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

dpduAlarmEnvDisconnect		1.3.6.1.4.1.4555.2.30.4.19
To indicate the communication status of EnviroProbe.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(0), yes(1)

dpduCommunicationLost		1
Communication with the PDU failed.
TRAP-TYPE

dpduCommunicationEstablished		2
Communication with the PDU reestablished.
TRAP-TYPE

dpduL1LoadMajorAlarm		3
L1 load major alarm.
TRAP-TYPE

dpduL1LoadMajorAlarmRecover		4
Recover from L1 load major alarm.
TRAP-TYPE

dpduL1LoadMinorAlarm		5
L1 load minor alarm.
TRAP-TYPE

dpduL1LoadMinorAlarmRecover		6
Recover from L1 load minor alarm.
TRAP-TYPE

dpduL1OutVoltMajorAlarm		7
L1 output voltage major alarm.
TRAP-TYPE

dpduL1OutVoltMajorAlarmRecover		8
Recover from L1 output voltage major alarm.
TRAP-TYPE

dpduL1OutVoltMinorAlarm		9
L1 output voltage minor alarm.
TRAP-TYPE

dpduL1OutVoltMinorAlarmRecover		10
Recover from L1 output voltage minor alarm.
TRAP-TYPE

dpduL2LoadMajorAlarm		11
L2 load major alarm.
TRAP-TYPE

dpduL2LoadMajorAlarmRecover		12
Recover from L2 load major alarm.
TRAP-TYPE

dpduL2LoadMinorAlarm		13
L2 load minor alarm.
TRAP-TYPE

dpduL2LoadMinorAlarmRecover		14
Recover from L2 load minor alarm.
TRAP-TYPE

dpduL2OutVoltMajorAlarm		15
L2 output voltage major alarm.
TRAP-TYPE

dpduL2OutVoltMajorAlarmRecover		16
Recover from L2 output voltage major alarm.
TRAP-TYPE

dpduL2OutVoltMinorAlarm		17
L2 output voltage minor alarm.
TRAP-TYPE

dpduL2OutVoltMinorAlarmRecover		18
Recover from L2 output voltage minor alarm.
TRAP-TYPE

dpduL3LoadMajorAlarm		19
L3 load major alarm.
TRAP-TYPE

dpduL3LoadMajorAlarmRecover		20
Recover from L3 load major alarm.
TRAP-TYPE

dpduL3LoadMinorAlarm		21
L3 load minor alarm.
TRAP-TYPE

dpduL3LoadMinorAlarmRecover		22
Recover from L3 load minor alarm.
TRAP-TYPE

dpduL3OutVoltMajorAlarm		23
L3 output voltage major alarm.
TRAP-TYPE

dpduL3OutVoltMajorAlarmRecover		24
Recover from L3 output voltage major alarm.
TRAP-TYPE

dpduL3OutVoltMinorAlarm		25
L3 output voltage minor alarm.
TRAP-TYPE

dpduL3OutVoltMinorAlarmRecover		26
Recover from L3 output voltage minor alarm.
TRAP-TYPE

dpduL12LoadMajorAlarm		27
L1 L2 load major alarm.
TRAP-TYPE

dpduL12LoadMajorAlarmRecover		28
Recover from L1 L2 load major alarm.
TRAP-TYPE

dpduL12LoadMinorAlarm		29
L1 L2 load minor alarm.
TRAP-TYPE

dpduL12LoadMinorAlarmRecover		30
Recover from L1 L2 load minor alarm.
TRAP-TYPE

dpduEnvCommunicationLost		31
Communication with the environmental sensor failed.
TRAP-TYPE

dpduEnvCommunicationEstablished		32
Communication with the environmental sensor reestablished.
TRAP-TYPE

dpduEnvOverWarnTemperature		33
The environment over warning temperature.
TRAP-TYPE

dpduNoLongerEnvOverWarnTemperature		34
The environment recovered from over warning temperature.
TRAP-TYPE

dpduEnvOverWarnHumidity		35
The environment over warning humidity.
TRAP-TYPE

dpduNoLongerEnvOverWarnHumidity		36
The environment recovered from over warning humidity.
TRAP-TYPE

dpduEnvOverAlarmTemperature		37
The environment over alarm temperature.
TRAP-TYPE

dpduNoLongerEnvOverAlarmTemperature		38
The environment recovered from over alarm temperature.
TRAP-TYPE

dpduEnvOverAlarmHumidity		39
The environment over alarm humidity.
TRAP-TYPE

dpduNoLongerEnvOverAlarmHumidity		40
The environment recovered from over alarm humidity.
TRAP-TYPE

dpduEnvRelay1Alarm		41
The environment relay1 is not in normal state.
TRAP-TYPE

dpduEnvRelay1Normal		42
The environment relay1 is in normal state.
TRAP-TYPE

dpduEnvRelay2Alarm		43
The environment relay2 is not in normal state.
TRAP-TYPE

dpduEnvRelay2Normal		44
The environment relay2 is in normal state.
TRAP-TYPE

dpduEnvRelay3Alarm		45
The environment relay3 is not in normal state.
TRAP-TYPE

dpduEnvRelay3Normal		46
The environment relay3 is in normal state.
TRAP-TYPE

dpduEnvRelay4Alarm		47
The environment relay4 is not in normal state.
TRAP-TYPE

dpduEnvRelay4Normal		48
The environment relay4 is in normal state.
TRAP-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor