SONUS-TC

File: SONUS-TC.mib (12541 bytes)

Imported modules

Imported symbols

Integer32	MODULE-IDENTITY	TEXTUAL-CONVENTION
sonusModules

Defined Types

HwTypeID
Represents the different types of hardware components that are available in a GSX9000 shelf.
TEXTUAL-CONVENTION
	INTEGER	none(1), unknown(14), undefined(15), mns10(16), pns10(17), cns10(18), cns30(19), mta01(20), mna10(21), pna10(22), cna33(23), cna10(24), cna30(25), sonicPlane(26), fanTray(27), mta10(28), cna01(29), cna03(30), cns20(31), pns20(32), sps60(33), cna20(34), cna21(35), pna21(36), pna23(37), cns61(38), cna61(39), mta20(40), mta21(41), cna06(42), cns31(43), cns25(44), cna25(45), pns30(46), pna30(47), sonicPlane2(48), cna02(49), cna05(50)

ServerTypeID
Represents the different types of server modules which are available in a GSX9000 shelf.
TEXTUAL-CONVENTION
	INTEGER	mns10(16), pns10(17), cns10(18), cns30(19), cns20(31), pns20(32), cns25(44), cns31(43), pns30(46), cns61(38)

AdapterTypeID
Represents the different types of adapter modules which are available in a GSX9000 shelf.
TEXTUAL-CONVENTION
	INTEGER	none(1), mna10(21), pna10(22), cna10(24), cna30(25), cna33(23), cna01(29), cna03(30), cna20(34), cna21(35), pna21(36), cna25(45), pna30(47), cna02(49), cna05(50), cna61(39), cna06(42)

ServerFunctionType
Represents the logical function of the server/adapter pair
TEXTUAL-CONVENTION
	INTEGER	default(1), atm(2), mgmt(3), t1(4), e1(5), t3(6), sps(7), oc3tdm(8), pos(9), enet(10)

SonusShelfIndex
The index for a Sonus shelf.
TEXTUAL-CONVENTION
	Integer32	1..6

SonusSlotIndex
The index for a Sonus slot.
TEXTUAL-CONVENTION
	Integer32	1..16

SonusEventString
This data type is used to model textual information taken from the NVT ASCII character set.
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..511)

SonusEventClass
The categories of which events are classified by.
TEXTUAL-CONVENTION
	INTEGER	sysmgmt(1), callproc(2), resmgmt(3), directory(4), netmgmt(5), signaling(6), routing(7), trace(8)

SonusEventLevel
The severity level of events.
TEXTUAL-CONVENTION
	INTEGER	critical(1), major(2), minor(3), info(4)

SonusEventFilterLevel
The filter severity level of events.
TEXTUAL-CONVENTION
	INTEGER	noevents(0), critical(1), major(2), minor(3), info(4)

SonusName
This data type is used to model textual information taken from the NVT ASCII character set. The SonusName type is used to label Sonus Named objects.
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..23)

SonusNameReference
This data type is used to model textual information taken from the NVT ASCII character set. The SonusNameReference type is used to refer to Sonus Named objects.
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..23)

SonusBoolean
This data type is used to model a boolean value expressed as true or false.
TEXTUAL-CONVENTION
	INTEGER	false(1), true(2)

PointCode
A three octet data type representing the SS7 PointCode. The octets represent Network-Cluster-Member values respectively.
TEXTUAL-CONVENTION
	Integer32	0..16777215

SonusSysId
An INTEGER representing the sub-system identifiers for software components in a GSX9000 node.
TEXTUAL-CONVENTION
	INTEGER	evlog(1), ncm(2), nrs(3), fm(4), sm(5), sma(6), nrm(7), nrma(8), brm(9), drm(10), prm(11), xrm(12), cc(13), icm(14), ipdh(15), epdh(16), ds(17), debug(18), trm(19), sg(20), gwfe(21), gwsg(22), sg-7(23), rtcp(24), tccs(25), cli(26), snmp(27), hsim(28), lesim(29), ss7fe(30), led(31), param(32), cb(33), acm(34), ntp(35), diag(36), cam(37), asg(38), mgsg(39), ipdcfe(40), ltt(41), tm(42), stm(43), sta(44), nfs(45), isdn(46), enm(47), arm(48), arma(49), rtm(50), psdh(51), atmrm(52), dcl(53), psd(54), cassg(55), pfa(56), mgcpfe(57), spm(58), spma(59), h323sg(60), h323fe(61), sipsg(62), sipfe(63)

SonusServiceState
The service state of a resource.
TEXTUAL-CONVENTION
	INTEGER	outOfService(1), inService(2)

SonusAdminState
The administrative state of a resource.
TEXTUAL-CONVENTION
	INTEGER	disabled(1), enabled(2)

SonusAdminAction
The action assignment of a resource.
TEXTUAL-CONVENTION
	INTEGER	dryUp(1), force(2)

SonusCircuitState
The state of an ISUP circuit.
TEXTUAL-CONVENTION
	INTEGER	unblocked(1), blocked(2), transientUnblock(3), transientBlock(4), notAvailable(5)

SonusMtaSlotIndex
The index identifying an MTA slot
TEXTUAL-CONVENTION
	INTEGER	mta1(1), mta2(2)

SonusTimingSource
Timing source types. extClkA and extClkB specifiy either BITS or SETS clock inputs, depending on whether the MTA is an MTA10(BITS) or MTA20(SETS). refClkA and refClkB indicate recovered/derived from a DS1 (for instance)
TEXTUAL-CONVENTION
	INTEGER	extClkA(1), extClkB(2), refClkA(3), refClkB(4), oscillator(5), holdover(6)

SonusSoftwareVersion
Octet string that identifies the version of the runtime software application: Byte(s) Code ------- ---- 0 major version 1 minor version 2 release version 3 type (1:alpha, 2:beta, 3:release, 4:special) 4-5 type number
TEXTUAL-CONVENTION
	OCTET STRING	Size(6)

SonusSystemName
This data type refers to the name of networking device.
TEXTUAL-CONVENTION
	OCTET STRING	Size(0..255)

SonusTrapType
The type of trap PDU to be generated: none - no PDU is generated trapv1 - SNMPv1-Trap-PDU trapv2 - SNMPv2-Trap-PDU inform - InformRequestPDU
TEXTUAL-CONVENTION
	INTEGER	none(0), trapv1(1), trapv2(2), inform(3)

SonusAccessLevel
The User and Mgmt Client access level.
TEXTUAL-CONVENTION
	INTEGER	readOnly(1), readWrite(2), admin(3)

SonusPointCode
Octet string that represents a point code. A point code may be comprised of one or more sub-values. Each sub-value is stored in two bytes of the octet string. The first two bytes of the octet string contains the count of the two-byte sub-values that comprise the point code. The remaining bytes of the octet string contain the two-byte sub-values. For example: Point Code Octet String ---------- ------------ 4-200-7 00 04 00 C8 00 07 2-1000-3 00 02 03 E8 00 08 15-750 00 FF 02 EE 16000 3E 80
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..64)

SonusPointCodeFormat
Octet string that represents a point code format, such as 2-10-2, 3-8-3, 4-10 or 14. A point code format specifies the number of bits that each sub-value of a point code value is stored in. The total number of bits should be 14. A point code format is used to specify how a point code value should be stored in a 14 bit value. A point code format may be comprised of one or more numbers. Each number is stored in one byte of the octet string. The first byte of the octet string contains the count of the one-byte numbers that comprise the point code format. The remaining bytes of the octet string contain the one-byte numbers. For example: Point Code Format Octet String ----------------- ------------ 3-8-3 03 08 03 2-10-2 02 0A 02 4-10 04 0A 14 0E
TEXTUAL-CONVENTION
	OCTET STRING	Size(1..32)

SonusSupportFlag
The flag to indicate if the attribute is supported.
TEXTUAL-CONVENTION
	INTEGER	unsupported(1), supported(2)

Defined Values

sonusTextualConventions		1.3.6.1.4.1.2879.3.1
This module defines textual conventions used throughout sonus enterprise mibs.
MODULE-IDENTITY

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor