SRAP-WCM-MIB

File: SRAP-WCM-MIB.mib (59516 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
RFC1213-MIB A3Com-products-MIB SRAP-GLOBAL-REG

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Counter32 Integer32
Gauge32 OBJECT-GROUP NOTIFICATION-GROUP
MacAddress ifIndex a3Com
srAPWCM srAPModules

Defined Types

ApAdditionalGatewaysEntry  
SEQUENCE    
  additionalGatewaysIndex INTEGER
  apAdditionalGatewaysIPAddr IpAddress

ApDSPerFreqStatEntry  
SEQUENCE    
  rfDSFrequency INTEGER
  rfDSPerFqPktsSents Counter32
  rfDSPerFqPktsRcvds Counter32
  rfDSPerFqRetries Counter32

ApSyslogDstIpAddressEntry  
SEQUENCE    
  apSyslogDstIpAddressIndex INTEGER
  apSyslogDstIpAddress IpAddress

ApAuthServerEntry  
SEQUENCE    
  apAuthServerIndex Integer32
  apAuthServerIPAddr IpAddress
  apAuthServerPortNumber Integer32
  apAuthSharedSecret OCTET STRING
  apAuthServerRetransmit Integer32
  apAuthServerTimeout Integer32

ApKeyServerEntry  
SEQUENCE    
  apKeyServerIndex Integer32
  apKeyServerIPAddr IpAddress
  apKeyServerPortNumber Integer32

ApAccountServerEntry  
SEQUENCE    
  apAccountServerIndex Integer32
  apAccountServerIPAddr IpAddress
  apAccountServerPortNumber Integer32
  apAccountServerSharedSecret OCTET STRING
  apAccountServerRetransmit Integer32
  apAccountServerTimeout Integer32

APEncryptionEntry  
SEQUENCE    
  apEncryptionMode INTEGER
  apWPAPSKPassPhrase OCTET STRING
  apWEPDefaultKeyID INTEGER
  apWEPDefaultKey1 OCTET STRING
  apWEPDefaultKey2 OCTET STRING
  apWEPDefaultKey3 OCTET STRING
  apWEPDefaultKey4 OCTET STRING

Defined Values

srAPWCMMIBModule 1.3.6.1.4.1.43.35.1.1.5
The 3COM Wireless LAN Products Web Configuration Management MIB Module.
MODULE-IDENTITY    

wcmMIB 1.3.6.1.4.1.43.35.1.7.1
OBJECT IDENTIFIER    

wcmConf 1.3.6.1.4.1.43.35.1.7.1.1
OBJECT IDENTIFIER    

apConfigMgmtGroups 1.3.6.1.4.1.43.35.1.7.1.1.1
OBJECT IDENTIFIER    

apPerformMgmtGroups 1.3.6.1.4.1.43.35.1.7.1.1.2
OBJECT IDENTIFIER    

apFaultMgmtGroups 1.3.6.1.4.1.43.35.1.7.1.1.3
OBJECT IDENTIFIER    

apSecurityMgmtGroups 1.3.6.1.4.1.43.35.1.7.1.1.4
OBJECT IDENTIFIER    

apEventGroups 1.3.6.1.4.1.43.35.1.7.1.1.5
OBJECT IDENTIFIER    

wcmObjs 1.3.6.1.4.1.43.35.1.7.1.2
OBJECT IDENTIFIER    

apConfigMgmt 1.3.6.1.4.1.43.35.1.7.1.2.1
OBJECT IDENTIFIER    

apManufactureInfo 1.3.6.1.4.1.43.35.1.7.1.2.1.1
OBJECT IDENTIFIER    

apSystemConfig 1.3.6.1.4.1.43.35.1.7.1.2.1.2
OBJECT IDENTIFIER    

apSNMPInfo 1.3.6.1.4.1.43.35.1.7.1.2.1.3
OBJECT IDENTIFIER    

apRFConfig 1.3.6.1.4.1.43.35.1.7.1.2.1.4
OBJECT IDENTIFIER    

apPerformMgmt 1.3.6.1.4.1.43.35.1.7.1.2.2
OBJECT IDENTIFIER    

apRFStatistics 1.3.6.1.4.1.43.35.1.7.1.2.2.1
OBJECT IDENTIFIER    

apEtherItfStat 1.3.6.1.4.1.43.35.1.7.1.2.2.2
OBJECT IDENTIFIER    

apRFItfStat 1.3.6.1.4.1.43.35.1.7.1.2.2.3
OBJECT IDENTIFIER    

apTrafficMatrix 1.3.6.1.4.1.43.35.1.7.1.2.2.4
OBJECT IDENTIFIER    

apFaultMgmt 1.3.6.1.4.1.43.35.1.7.1.2.3
OBJECT IDENTIFIER    

apSecurityMgmt 1.3.6.1.4.1.43.35.1.7.1.2.4
OBJECT IDENTIFIER    

wcmEvents 1.3.6.1.4.1.43.35.1.7.1.3
OBJECT IDENTIFIER    

wcmEventsV2 1.3.6.1.4.1.43.35.1.7.1.3.0
OBJECT IDENTIFIER    

apModelnumber 1.3.6.1.4.1.43.35.1.7.1.2.1.1.1
The Model Number of the ACCESS Point device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

apSerialnumber 1.3.6.1.4.1.43.35.1.7.1.2.1.1.2
The Serial Number of the ACCESS Point system.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

apMyMacAddr 1.3.6.1.4.1.43.35.1.7.1.2.1.1.3
The MAC address of the ACCESS Point.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

apFirmwareVer 1.3.6.1.4.1.43.35.1.7.1.2.1.1.4
The current version of the ACCESS Point firmware.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

apWebUiVer 1.3.6.1.4.1.43.35.1.7.1.2.1.1.5
The current version of the ACCESS Point WEB Configration System.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

apMfgDate 1.3.6.1.4.1.43.35.1.7.1.2.1.1.6
The Date of this ACCESS Point was manufactured.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

apProductName 1.3.6.1.4.1.43.35.1.7.1.2.1.1.7
The Product Name of this ACCESS Point.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

apMfgName 1.3.6.1.4.1.43.35.1.7.1.2.1.1.8
The Manufacture Name of this ACCESS Point.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

apHardwareRev 1.3.6.1.4.1.43.35.1.7.1.2.1.1.9
The Hardware Revision of this ACCESS Point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4294967295  

apDeviceName 1.3.6.1.4.1.43.35.1.7.1.2.1.2.1
An ASCII string to identify the Device Name of this ACCESS Point (up to 255 characters).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

apDeviceLoc 1.3.6.1.4.1.43.35.1.7.1.2.1.2.2
An ASCII string to identify the Location of this ACCESS Point (up to 255 characters).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

apHelpFilePath 1.3.6.1.4.1.43.35.1.7.1.2.1.2.3
An ASCII string to identify the Location of this ACCESS Point (up to 255 characters).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

apMyIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.1.2.4
The IP address for the Access Point. It can be set when apStaticIPAddrEnable is set to is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

apSubnetMask 1.3.6.1.4.1.43.35.1.7.1.2.1.2.5
The subnet mask for the Access Point. It can be set when apStaticIPAddrEnable is set to enabled.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

apGatewayIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.1.2.6
The IP address of the gateway for the Access Point.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

apAdditionalGatewaysTableLength 1.3.6.1.4.1.43.35.1.7.1.2.1.2.7
The maximum number of entries in the Additional Gateways Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

apAdditionalGatewaysTable 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8
A table of information for additional Gateways. The current number of entries is 4(that mean aditional gateway is 3).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ApAdditionalGatewaysEntry

apAdditionalGatewaysEntry 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1
An entry in the table of information for additional gateways for this ACCESS Point. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ApAdditionalGatewaysEntry  

additionalGatewaysIndex 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1.1
Specific Gateway information Table index. Range (1..3).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..3  

apAdditionalGatewaysIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1.2
The IP address of the Gateway used for this Access Point.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

apDHCPEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.2.9
Enables/Disables Wireless DHCP mode for the Access Point. Default is disabled(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

apStaticIPAddrEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.2.10
Enables/Disables Static IP of ACCESS Point . Default is disabled(2). Before issuing this command, set 'apMyIPAddr', 'apSubnetMask', and 'apGatewayIPAddr' to the proper values.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

apSNMPRequests 1.3.6.1.4.1.43.35.1.7.1.2.1.3.1
Indicates the number of SNMP requests to this SNMP Agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apSNMPTraps 1.3.6.1.4.1.43.35.1.7.1.2.1.3.2
Indicates the number of Traps that were generated by this SNMP Agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apAllTrapsEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.3
Enables/Disables all SNMP traps. Default is enabled(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

apColdBootTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.4
Enables/Disables ACCESS Point Cold Boot trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 0. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4)  

apAuthenFailureTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.5
Enables/Disables authentication failure trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 4. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4)  

apRFTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.6
Enables/Disables ACCESS Point RF driver startup trap. Default is allTrapHosts(4). This is an a3com enterprise-specific trap. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4)  

apWarmBootTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.7
Enables/Disables Warm Boot trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 0. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4)  

apWCMaxAssocTrapEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.8
Enables/Disables apWCMaxAssoc Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4)  

apThresholdAssociatedEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.9
Enables/Disables apThresholdAssociated Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable mib variable should be enabled for this trap to be issued.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4)  

dslSecurityViolationEnable 1.3.6.1.4.1.43.35.1.7.1.2.1.3.10
Enables/Disables dslSecurityViolation Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable MIB variable should be enabled for this trap to be issued.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), trapHost1(2), trapHost2(3), allTrapHosts(4)  

apWlanServiceArea 1.3.6.1.4.1.43.35.1.7.1.2.1.4.1
The WLAN Service Area of the ACCESS Point.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

apCountryName 1.3.6.1.4.1.43.35.1.7.1.2.1.4.2
The country for which the ACCESS Point radio is configured. It is set at the factory and may not be altered.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

apWEPAlgorithm 1.3.6.1.4.1.43.35.1.7.1.2.1.4.3
This attribute is a set of all the shared key WEP algorithms supported by the STAs. The following are the default values and the associated algorithm. Value = 1: open system Value = 2: 40 bit Key Value = 3: 128 bit Key IMPORTANT NOTE: The 128 bit WEP key ENcryption is currently restricted by U.S. laws.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER openSystem(1), wep40bShareKey(2), wep128bShareKey(3), wep128bpasswordsessionKey(4), wepEAPMD5Authenticationwithnoencryption(5), wepEAPMD5Authenticationwith40bsharedkey(6), wepEAPMD5Authenticationwith128bsharedkey(7), wepEAPMD5Authenticationwith128bpasswordsessionkey(8), wepEAPTLSAuthenticationwith40bsessionkey(9), wepEAPTLSAuthenticationwith128bsessionkey(10), wepSerialAuthenticationwith40bsessionkey(11), wepSerialAuthenticationwith128bsessionkey(12)  

apShortPreamble 1.3.6.1.4.1.43.35.1.7.1.2.1.4.4
This attribute is a set to enable short preamble for compatibility within the 802.11 community. Setting it to enabled shall result in performance enhancement. Default is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

apMaxWCTrigger 1.3.6.1.4.1.43.35.1.7.1.2.1.4.5
Indicates the trigger point for sending apWCMaxAssocTrap trap. Range (1..255) The default value is 255.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

apRadioAutoSense 1.3.6.1.4.1.43.35.1.7.1.2.1.4.6
This attribute is a set to enable Radio Auto Sense. Default is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

apRadioChannel 1.3.6.1.4.1.43.35.1.7.1.2.1.4.7
This attribute is Radio Channel. This attribute can be written when apRadioAutoSense is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..14  

apHighPerformance 1.3.6.1.4.1.43.35.1.7.1.2.1.4.8
This attribute is a set to enable Radio High Performance. Default is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

apTransmitPower 1.3.6.1.4.1.43.35.1.7.1.2.1.4.9
This attribute is a set the transmit power from 1-100 micro watts.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER high(1), medium(2), low(3)  

apRadioAntenna 1.3.6.1.4.1.43.35.1.7.1.2.1.4.10
This attribute is a set the section of radio antenna.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabledoneantenna(1), bothantennaon(2)  

thresholdAssociated 1.3.6.1.4.1.43.35.1.7.1.2.1.4.11
This attribute is a set the threshold of Associated Wireless Client. The default is 200.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

apDataRateMgmt 1.3.6.1.4.1.43.35.1.7.1.2.1.4.12
This attribute is automatically or manually set the best data rate .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

apDataRate5 1.3.6.1.4.1.43.35.1.7.1.2.1.4.13
This attribute is a set the data rate to 5.5 Mb/sec .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER optional(1), required(2)  

apDataRate11 1.3.6.1.4.1.43.35.1.7.1.2.1.4.14
This attribute is a set the data rate to 11.0 Mb/sec .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER optional(1), required(2)  

rfTxUcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.1
The number of Unicast frames successfully transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxUcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.2
The number of Unicast frames successfully received
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfTxBcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.3
The number of Broadcast frames transmitted
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxBcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.4
The number of Broadcast frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfTxMcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.5
The number of Multicast frames transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxMcastFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.6
The number of Multicast frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfTxEncryptFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.7
The number of Encrypted frames transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxEncryptFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.8
The number of Encrypted frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfTxFragFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.9
The number of frames fragments transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxFragFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.10
The number of frames fragments received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfTxBeacons 1.3.6.1.4.1.43.35.1.7.1.2.2.1.11
The number of Beacon frames transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxBeacons 1.3.6.1.4.1.43.35.1.7.1.2.2.1.12
The number of Beacon frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfTxACK 1.3.6.1.4.1.43.35.1.7.1.2.2.1.13
The number of ACK frames transmitted in response to successfully received frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxACK 1.3.6.1.4.1.43.35.1.7.1.2.2.1.14
The number of frames transmitted that had their corresponding ACK frames successfully received frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfTxRTS 1.3.6.1.4.1.43.35.1.7.1.2.2.1.15
The number of RTS frames that were successfully transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxRTS 1.3.6.1.4.1.43.35.1.7.1.2.2.1.16
The number of RTS received frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfCTSFailures 1.3.6.1.4.1.43.35.1.7.1.2.2.1.17
The number of frames for which no CTS frames was received in response to a RTS frames being sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxCTS 1.3.6.1.4.1.43.35.1.7.1.2.2.1.18
The number of CTS frames received in response to a RTS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfTxACKFailures 1.3.6.1.4.1.43.35.1.7.1.2.2.1.19
The number of frames transmitted that did not have their corresponding ACK packets successfully received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfTxRetrys 1.3.6.1.4.1.43.35.1.7.1.2.2.1.20
The number of frames that were retransmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfFCSErrors 1.3.6.1.4.1.43.35.1.7.1.2.2.1.21
The number of frames received with checksum error.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfRxDuplicateFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.22
The number of duplicate frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfWEPUndecryptFrms 1.3.6.1.4.1.43.35.1.7.1.2.2.1.23
The number of frames received with the WEP sub-field of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfWEPICVErrors 1.3.6.1.4.1.43.35.1.7.1.2.2.1.24
The number of frames received with the WEP sub-field of the Frame Control field set to one and the value of the ICV as received in the frame does not match the ICV value that is calculated for the contents of the received frame.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apEtherPacketsIns 1.3.6.1.4.1.43.35.1.7.1.2.2.2.1
Indicates the number of good packets received on the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apEtherPacketsOuts 1.3.6.1.4.1.43.35.1.7.1.2.2.2.2
Indicates the number of packets successfully transmitted on the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apEtherOctetsIns 1.3.6.1.4.1.43.35.1.7.1.2.2.2.3
Indicates the number of good bytes received on the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apEtherOctetsOuts 1.3.6.1.4.1.43.35.1.7.1.2.2.2.4
Indicates the number of bytes successfully transmitted on the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apEtherPktsInPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.2.5
Indicates the number of good packets per second received on the Ethernet Interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

apEtherPktsOutPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.2.6
Indicates the number of packets per second successfully transmitted on the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

apEtherOctInPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.2.7
Indicates the number of good bytes per second received on the Ethernet Interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

apEtherOctOutPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.2.8
Indicates the number of bytes per second successfully transmitted on the Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

apRFFrmsIns 1.3.6.1.4.1.43.35.1.7.1.2.2.3.1
Indicates the number of good packets received on the RF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apRFFrmsOuts 1.3.6.1.4.1.43.35.1.7.1.2.2.3.2
Indicates the number of packets successfully transmitted on the RF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apRFOctetsIns 1.3.6.1.4.1.43.35.1.7.1.2.2.3.3
Indicates the number of good bytes received on the RF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apRFOctetsOuts 1.3.6.1.4.1.43.35.1.7.1.2.2.3.4
Indicates the number of bytes successfully transmitted on the RF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apRFFrmsInPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.3.5
Indicates the number of good packets per second received on the RF Interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

apRFFrmsOutPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.3.6
Indicates the number of packets per second successfully transmitted on the RF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

apRFOctInPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.3.7
Indicates the number of good bytes per second received on the RF Interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

apRFOctOutPerSec 1.3.6.1.4.1.43.35.1.7.1.2.2.3.8
Indicates the number of bytes per second successfully transmitted on the RF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

apEnetsNPktsToEnets 1.3.6.1.4.1.43.35.1.7.1.2.2.4.1
Indicates the number of packets sent from the Ethernet Interface the Ethernet Interface. Must be 0
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apRFNPktsToEnets 1.3.6.1.4.1.43.35.1.7.1.2.2.4.2
Indicates the number of packets sent from the RF Interface to the Ethernet Interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apEnetsNPktsToRF 1.3.6.1.4.1.43.35.1.7.1.2.2.4.3
Indicates the number of packets sent from Ethernet Interface to the RF Interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apRFNPktsToRF 1.3.6.1.4.1.43.35.1.7.1.2.2.4.4
Indicates the number of packets sent from the RF Interfaceto the RF Interface. Must be 0
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apDSPerFreqStatTable 1.3.6.1.4.1.43.35.1.7.1.2.2.5
A table of Radio Per Frequency statistics, which is based on the historical frequency records used by this Access Point. The current number of entries is 78.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ApDSPerFreqStatEntry

apDSPerFreqStatEntry 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1
An entry in the table of Radio per frequency statistics. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ApDSPerFreqStatEntry  

rfDSFrequency 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.1
Radio Frequency channel number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

rfDSPerFqPktsSents 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.2
Counter for the packets sent per frequency.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfDSPerFqPktsRcvds 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.3
Counter for the packets received per frequency.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rfDSPerFqRetries 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.4
Counter for the retries per frequency.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apUpdateTemplateStatus 1.3.6.1.4.1.43.35.1.7.1.2.3.1
Reports the Firmware/HTML file download and update status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER downloadSuccessful(1), downloadUnknownError(2), downloadTimeout(3), badFileName(4), badMacAddrForRestoreFile(5), incorrectFileImage(6), tftpFileNotFound(7), tftpAccessViolation(8), tftpDiskfullOrAllocationExceeded(9), tftpIllegalTFTPoperation(10), tftpUnknownTransferID(11), tftpFileAlreadyExists(12), tftpNoSuchUser(13), fileDownloadOrUpload(14)  

apBackupFileName 1.3.6.1.4.1.43.35.1.7.1.2.3.2
The name of the file to be backuped to the TFTP Server. (Including path name and total up to 255 characters.)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

apTemplateOperation 1.3.6.1.4.1.43.35.1.7.1.2.3.3
startBackup(1) - Backup the AP configuration through TFTP server. The AP backup configuration, named as apBackupFileName, will be saved in the default location of TFTP server. Before issuing this command, set 'apBackupFileName', and 'apTFTPServer' to the proper values. startTemplate(2) - This allows the network management platform to restore the template configuration of a AP, from one of it's previous backups. It is expected that common Parameters of AP in the backup configuration file, named as apRestoreFileName, will be restored to the AP. Before issuing this command, set 'apRestoreFileName', and 'apTFTPServer' to the proper values. startRestore(3) - This allows the network management platform to restore the full configuration of a AP, from one of it's previous backups. It is expected that full of the data in the backup configuration file, named as apRestoreFileName, will be restored to the AP. Before issuing this command, set 'apRestoreFileName', and 'apTFTPServer' to the proper values.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER startBackup(1), startTemplate(2), startRestore(3), uploadingData(4), downloadingData(5), notDownloading(6), idle(7)  

apRestoreFileName 1.3.6.1.4.1.43.35.1.7.1.2.3.4
The name of the file to be restored to the AP. (Including path name and total up to 255 characters.)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

apSyslogDstIpAddressTableLength 1.3.6.1.4.1.43.35.1.7.1.2.3.5
The maximum number of entries in the Syslog Destination Ip Address Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

apSyslogDstIpAddressTable 1.3.6.1.4.1.43.35.1.7.1.2.3.6
A table of Syslog Destination Ip Address. The current number of entries is 2.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ApSyslogDstIpAddressEntry

apSyslogDstIpAddressEntry 1.3.6.1.4.1.43.35.1.7.1.2.3.6.1
An entry in the table of Syslog Destination Ip Address for this ACCESS Point. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ApSyslogDstIpAddressEntry  

apSyslogDstIpAddressIndex 1.3.6.1.4.1.43.35.1.7.1.2.3.6.1.1
Specific Syslog Destination Ip Address Table index. Range (1..2).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..2  

apSyslogDstIpAddress 1.3.6.1.4.1.43.35.1.7.1.2.3.6.1.2
The IP address of Syslog Destination used for this Access Point.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

apSyslogEnable 1.3.6.1.4.1.43.35.1.7.1.2.3.7
Enables/Disables syslog for the Access Point. Default is disabled(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

apACLViolations 1.3.6.1.4.1.43.35.1.7.1.2.4.1
Indicates the number of Access Control violations occurred.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

apEAPSupport 1.3.6.1.4.1.43.35.1.7.1.2.4.2
The AP supprt the Extensive Authentication Protocol is enabled or disabled. Default is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), eap(2), serialauth(3)  

apAuthServerSupportNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.3
The maximum number of entries in the Authenicator Server Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

apKeyServerSupportNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.4
The maximum number of entries in the Key Server Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

apAccountServerSupportNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.5
The maximum number of entries in the Accounting Server Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

apAuthServerTable 1.3.6.1.4.1.43.35.1.7.1.2.4.6
A table of information for Authenticator Servers. Now support number of entries is 2.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ApAuthServerEntry

apAuthServerEntry 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1
An entry in the table of information for Authenticator Servers for this Access Point.
Status: current Access: not-accessible
OBJECT-TYPE    
  ApAuthServerEntry  

apAuthServerIndex 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.1
A number uniquely identifying each Authenticator server.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

apAuthServerIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.2
The IP address of the Authenticator server referred to in this table entry.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

apAuthServerPortNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.3
The UDP port the client is using to send requests to this Authenticator server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

apAuthSharedSecret 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.4
This values indicates the shared key used by the authentication server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

apAuthServerRetransmit 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.5
The number of times the access point tries to authenticate logon access.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..30  

apAuthServerTimeout 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.6
The number of seconds the access point waits for a reply from the RADIUS server before it resends the request
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..60  

apKeyServerTable 1.3.6.1.4.1.43.35.1.7.1.2.4.7
A table of information for Key Servers. Now support number of entries is 2.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ApKeyServerEntry

apKeyServerEntry 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1
An entry in the table of information for Key Servers for this Access Point.
Status: current Access: not-accessible
OBJECT-TYPE    
  ApKeyServerEntry  

apKeyServerIndex 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.1
A number uniquely identifying each Key server.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

apKeyServerIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.2
The IP address of the Key server referred to in this table entry.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

apKeyServerPortNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.3
The UDP port the client is using to send requests to this server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

apAccountServerTable 1.3.6.1.4.1.43.35.1.7.1.2.4.8
A table of information for Account Servers. Now support number of entries is 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ApAccountServerEntry

apAccountServerEntry 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1
An entry in the table of information for Account Servers for this Access Point.
Status: current Access: not-accessible
OBJECT-TYPE    
  ApAccountServerEntry  

apAccountServerIndex 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.1
A number uniquely identifying each Account server.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

apAccountServerIPAddr 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.2
The IP address of the Account server referred to in this table entry.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

apAccountServerPortNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.3
The UDP port the client is using to send requests to this server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

apAccountServerSharedSecret 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.4
This values indicates the shared key used by the accounting server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

apAccountServerRetransmit 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.5
The number of times the access point tries to accounting logon access.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..30  

apAccountServerTimeout 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.6
The number of seconds the access point waits for a reply from the RADIUS accounting server before it resends the request
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..60  

apFastReKeying 1.3.6.1.4.1.43.35.1.7.1.2.4.9
The AP supprt the Fast-rekeying is enabled or disabled. Default is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

apTFTPServerPortNumber 1.3.6.1.4.1.43.35.1.7.1.2.4.10
The TFTP Server port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

apTFTPRetries 1.3.6.1.4.1.43.35.1.7.1.2.4.11
The maximum retries number of tftp client in SRAPEE
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

apTFTPTimeOutInterval 1.3.6.1.4.1.43.35.1.7.1.2.4.12
The maximum time out interval of tftp client in SRAPEE
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

apEncryptionTable 1.3.6.1.4.1.43.35.1.7.1.2.4.13
Conceptual table for Encryption setting of device
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    APEncryptionEntry

apEncryptionEntry 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1
An Entry (conceptual row) in the Encryption Table ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  APEncryptionEntry  

apEncryptionMode 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.1
The encryption mode that each IEEE 802.11 Interface(apEncryptionMode.ifIndex) is using. Value: 1 = No Encryption 2 = 64 bit WEP 3 = 128 bit WEP 4 = 152 bit WEP 5 = TKIP using WPA-PSK 6 = TKIP using WPA-Enterprise 7 = AES using WPA-PSK 8 = AES using WPA-Enterprise
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), wep64b(2), wep128b(3), wep152b(4), tkipWPAPSK(5), tkipWPAEnterprise(6), aesWPAPSK(7), aesWPAEnterprise(8)  

apWPAPSKPassPhrase 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.2
A WPA Pre-Share Key Pass Phrase.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8..63)  

apWEPDefaultKeyID 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.3
The WEPDefaultKey N currently being used to encrypt data
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

apWEPDefaultKey1 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.4
A WEP default secret key 1 value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(5|13|16)  

apWEPDefaultKey2 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.5
A WEP default secret key 2 value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(5|13|16)  

apWEPDefaultKey3 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.6
A WEP default secret key 3 value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(5|13|16)  

apWEPDefaultKey4 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.7
A WEP default secret key 4 value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(5|13|16)  

radioTransmitStop 1.3.6.1.4.1.43.0.95
The radio has stopped transmitting due to a fault. There may be a jammed channel. The user should change the AP to the different channel or check if there is a RF hardware issue.
Status: current Access: read-write
NOTIFICATION-TYPE    

radioReceiveStop 1.3.6.1.4.1.43.0.96
The radio has stopped receiving due to a fault. There may be a jammed channel. The user should change the AP to the different channel or check if there is a RF hardware issue.
Status: current Access: read-write
NOTIFICATION-TYPE    

exceedMaxAssociated 1.3.6.1.4.1.43.0.97
Exceed max 256 Associated clients. No more association of wireless clients allowed. The user can disassociate the idle wirless clients.
Status: current Access: read-write
NOTIFICATION-TYPE    

exceedtThresholdAssociated 1.3.6.1.4.1.43.0.98
The number of Wireless Clients association reaches the threshold of the AP. Please check the MIB object, thresholdAssociated. The default is 200. The number of wireless client is more than the value of thresholdAssociated. This will affect the performace of the AP.
Status: current Access: read-write
NOTIFICATION-TYPE    

dslSecurityViolation 1.3.6.1.4.1.43.0.99
For Wireless Client, User name or password is not correct in Dynamic Security Link database of AP. The user can check the AP admin if the account exists on the Dynamic Security Link database
Status: current Access: read-write
NOTIFICATION-TYPE    

apManufactureInfoGroup 1.3.6.1.4.1.43.35.1.7.1.1.1.1
The apManufactureInfo group
Status: current Access: read-write
OBJECT-GROUP    

apSystemConfigGroup 1.3.6.1.4.1.43.35.1.7.1.1.1.2
The apSystemConfig group
Status: current Access: read-write
OBJECT-GROUP    

apSNMPInfoGroup 1.3.6.1.4.1.43.35.1.7.1.1.1.3
The apSNMPInfo group
Status: current Access: read-write
OBJECT-GROUP    

apRFConfigGroup 1.3.6.1.4.1.43.35.1.7.1.1.1.4
The apRFConfig group
Status: current Access: read-write
OBJECT-GROUP    

apRFStatisticsGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.1
The apRFStatistics group
Status: current Access: read-write
OBJECT-GROUP    

apEtherItfStatGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.2
The apEtherInfStat group
Status: current Access: read-write
OBJECT-GROUP    

apRFItfStatGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.3
The apRFInfStat group
Status: current Access: read-write
OBJECT-GROUP    

apTrafficMatrixGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.4
The apTrafficMatrix group
Status: current Access: read-write
OBJECT-GROUP    

apDSPerFreqStatTableGroup 1.3.6.1.4.1.43.35.1.7.1.1.2.5
The apDSPerFreqStatTable group
Status: current Access: read-write
OBJECT-GROUP    

apFaultMgmtGroup 1.3.6.1.4.1.43.35.1.7.1.1.3.1
The apRFStatistics group
Status: current Access: read-write
OBJECT-GROUP    

apSecurityMgmtGroup 1.3.6.1.4.1.43.35.1.7.1.1.4.1
The apSecurityMgmt group
Status: current Access: read-write
OBJECT-GROUP    

wcmNotificationGroup 1.3.6.1.4.1.43.35.1.7.1.1.5.1
The wcm Notifications.
Status: current Access: read-write
NOTIFICATION-GROUP