STMIB

File: STMIB.mib (671147 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

enterprises IpAddress Counter
Gauge TimeTicks NetworkAddress
OBJECT-TYPE DisplayString

Defined Types

NodeAddr  
OCTET STRING Size(2)    

NestAddr  
OCTET STRING Size(1)    

SlotAddr  
OCTET STRING Size(2)    

PortAddr  
OCTET STRING Size(4)    

Ad10PortAddr  
OCTET STRING Size(6)    

AsmX50CkAddr  
OCTET STRING Size(6)    

RtmAdPortAddr  
OCTET STRING Size(6)    

BundleAddr  
OCTET STRING Size(6)    

ChannelAddr  
OCTET STRING Size(6)    

ChannelStatusAddr  
OCTET STRING Size(9)    

RecordIndex  
OCTET STRING Size(4)    

AlarmRecord  
OCTET STRING Size(64)    

Link2Index  
OCTET STRING Size(4)    

Link2Addr  
OCTET STRING Size(8)    

ScRootAccessEntry  
SEQUENCE    
  scRootAccessIndex INTEGER
  scRootAccessControlMode INTEGER
  scRootAccessIp IpAddress

ScNodeAccessEntry  
SEQUENCE    
  scNodeAccessIndex INTEGER
  scNodeAccessControlMode INTEGER
  scNodeAccessUpdate INTEGER
  scNodeAccessRootList OCTET STRING
  scNodeAccessChPrfList OCTET STRING
  scNodeAccessThroughput INTEGER
  scNodeAccessVoicePrfList OCTET STRING
  scNodeAccessLink2TraEntriesMin INTEGER
  scNodeAccessLink2TraEntriesMax INTEGER

ScCommunityEntry  
SEQUENCE    
  scCommunityIndex RecordIndex
  scCommunityControlMode INTEGER
  scCommunityName DisplayString
  scCommunityscMap OCTET STRING
  scCommunityrecfMap OCTET STRING
  scCommunityrestMap OCTET STRING
  scCommunityrestatisticsMap OCTET STRING
  scCommunityalMap OCTET STRING

ScTrapAccessEntry  
SEQUENCE    
  scTrapAccessIndex INTEGER
  scTrapAccessControlMode INTEGER
  scTrapAccessIp IpAddress

ScChProfileEntry  
SEQUENCE    
  scChProfileIndex INTEGER
  scChProfileControlMode INTEGER
  scChProfileCostType INTEGER
  scChProfileMaxCost INTEGER
  scChProfilePriority INTEGER
  scChProfileEncryption INTEGER
  scChProfileMaxSatHop INTEGER
  scChProfileErrPerformReq INTEGER
  scChProfileINLGroup INTEGER
  scChProfileOverrideMode INTEGER
  scChProfileRetryTimer INTEGER
  scChProfileInfoAlarmGen INTEGER

ScIpOnlineSubnetEntry  
SEQUENCE    
  scIpOnlineSubnetIndex INTEGER
  scIpOnlineSubnetAddr IpAddress

ScIpOfflineSubnetEntry  
SEQUENCE    
  scIpOfflineSubnetIndex INTEGER
  scIpOfflineSubnetControl INTEGER
  scIpOfflineSubnetAddr IpAddress

ScLgmStaticRouteEntry  
SEQUENCE    
  scLgmStaticRouteNode NodeAddr
  scLgmStaticRouteIndex INTEGER
  scLgmStaticRouteStartMode INTEGER
  scLgmStaticRouteNextIafHop INTEGER
  scLgmStaticRouteLink2GwyNode NodeAddr
  scLgmStaticRoutePathDelay INTEGER

ScVoicePrfNetEntry  
SEQUENCE    
  scVoicePrfNetIndex INTEGER
  scVoicePrfNetControlMode INTEGER
  scVoicePrfNetCompressMode INTEGER
  scVoicePrfNetSpeed INTEGER
  scVoicePrfNetDTMFRelay INTEGER
  scVoicePrfNetFaxRelay INTEGER
  scVoicePrfNetFaxNSFMode INTEGER
  scVoicePrfNetVocoderEnable INTEGER
  scVoicePrfNetDataMode INTEGER
  scVoicePrfNetSignalingType INTEGER
  scVoicePrfNetSigIdlePttrn INTEGER

ScVoicePrfNodeEntry  
SEQUENCE    
  scVoicePrfNodeIndex INTEGER
  scVoicePrfNodeRdnGrpId INTEGER
  scVoicePrfNodeTxAudSrcMode INTEGER
  scVoicePrfNodeRxAudOutMode INTEGER
  scVoicePrfNodeEchoCancel INTEGER
  scVoicePrfNodeNonLinear INTEGER
  scVoicePrfNodeTxPCMGain INTEGER
  scVoicePrfNodeRxPCMGain INTEGER
  scVoicePrfNodePCMPhasorSize INTEGER
  scVoicePrfNodeSubratePhSize INTEGER
  scVoicePrfNodeNetSigMode INTEGER

ScCmntyAccessEntry  
SEQUENCE    
  scCmntyAccessIndex RecordIndex
  scCmntyAccessControlMode INTEGER
  scCmntyAccessCommunityName DisplayString

ScCmntyMib2Entry  
SEQUENCE    
  scCmntyMib2Index RecordIndex
  scCmntyMib2SystemAccess INTEGER
  scCmntyMib2InterfacesAccess INTEGER
  scCmntyMib2AtAccess INTEGER
  scCmntyMib2IpAccess INTEGER
  scCmntyMib2IcmpAccess INTEGER
  scCmntyMib2UdpAccess INTEGER
  scCmntyMib2SnmpAccess INTEGER

ScCmntySecEntry  
SEQUENCE    
  scCmntySecIndex RecordIndex
  scCmntySecPartHeaderAccess INTEGER
  scCmntySecSystemProfileAccess INTEGER
  scCmntySecRootAccess INTEGER
  scCmntySecNodeAccess INTEGER
  scCmntySecTrapAccess INTEGER
  scCmntySecChanProfileAccess INTEGER
  scCmntySecSoftloadAccess INTEGER
  scCmntySecCPIAccess INTEGER
  scCmntySecModemAccess INTEGER
  scCmntySecIPAccess INTEGER
  scCmntySecLGMRoutingAccess INTEGER
  scCmntySecVoiceProfileAccess INTEGER
  scCmntySecCommunityAccess INTEGER

ScCmntyRecfEntry  
SEQUENCE    
  scCmntyRecfIndex RecordIndex
  scCmntyRecfPartHeader INTEGER
  scCmntyRecfNodeAccess INTEGER
  scCmntyRecfNestAccess INTEGER
  scCmntyRecfSlotAccess INTEGER
  scCmntyRecfModuleAccess INTEGER
  scCmntyRecfPortAccess INTEGER
  scCmntyRecfBundleAccess INTEGER
  scCmntyRecfINLAccess INTEGER
  scCmntyRecfTDMChannelAccess INTEGER
  scCmntyRecfFrRelayAccess INTEGER
  scCmntyRecfAd10PortAccess INTEGER
  scCmntyRecfAsmPortAccess INTEGER
  scCmntyRecfRtmPortAccess INTEGER
  scCmntyRecfLgmPortAccess INTEGER
  scCmntyRecfDsmPortAccess INTEGER
  scCmntyRecfTranslationAccess INTEGER
  scCmntyRecfHwRscAccess INTEGER

ScCmntyRestEntry  
SEQUENCE    
  scCmntyRestIndex RecordIndex
  scCmntyRestNodeAccess INTEGER
  scCmntyRestNestAccess INTEGER
  scCmntyRestSlotAccess INTEGER
  scCmntyRestModuleAccess INTEGER
  scCmntyRestPortAccess INTEGER
  scCmntyRestBundleAccess INTEGER
  scCmntyRestINLAccess INTEGER
  scCmntyRestINLContentsAccess INTEGER
  scCmntyRestChannelAccess INTEGER
  scCmntyRestAd10PortAccess INTEGER
  scCmntyRestAsmPortAccess INTEGER
  scCmntyRestTrkGrpAccess INTEGER
  scCmntyRestRtmPortAccess INTEGER
  scCmntyRestLgmPortAccess INTEGER
  scCmntyRestSafAccess INTEGER
  scCmntyRestDsmPortAccess INTEGER
  scCmntyRestHwRscAccess INTEGER

ScCmntyRestStEntry  
SEQUENCE    
  scCmntyRestStIndex RecordIndex
  scCmntyRestStModuleAccess INTEGER
  scCmntyRestStPortAccess INTEGER
  scCmntyRestStINLAccess INTEGER
  scCmntyRestStChannelAccess INTEGER
  scCmntyRestStAd10Access INTEGER

ScCmntyAlmEntry  
SEQUENCE    
  scCmntyAlmIndex RecordIndex
  scCmntyAlmPartHeader INTEGER
  scCmntyAlmAlarmProfileAccess INTEGER
  scCmntyAlmAlarmLogAccess INTEGER
  scCmntyAlmAlarmRecordAccess INTEGER
  scCmntyAlmTrapAccess INTEGER

RecfClockEntry  
SEQUENCE    
  recfClockIndex INTEGER
  recfClockStartMode INTEGER
  recfClockUpdate INTEGER
  recfClockType INTEGER
  recfClockStationSpeed INTEGER
  recfClockPortSource PortAddr
  recfClockQuality INTEGER
  recfClockPriority INTEGER

RecfAvailResourceEntry  
SEQUENCE    
  recfAvailResourceType INTEGER
  recfAvailResourceId OCTET STRING

RecfNestEntry  
SEQUENCE    
  recfNestAddr NestAddr
  recfNestDesc DisplayString

RecfSlotEntry  
SEQUENCE    
  recfSlotAddr SlotAddr
  recfSlotModuleStartMode INTEGER
  recfSlotUpdate INTEGER
  recfSlotModuleDesc DisplayString
  recfSlotModuleType INTEGER
  recfSlotModuleSubType INTEGER
  recfSlotRedundantMode INTEGER
  recfSlotGroupID INTEGER
  recfSlotModuleMaxBypass INTEGER
  recfSlotModuleMaxSource INTEGER
  recfSlotModuleStartDiagMask OCTET STRING
  recfSlotModuleBgdDiagMask OCTET STRING
  recfSlotModulePortDiagMask OCTET STRING
  recfSlotModuleDiagoseMode INTEGER
  recfSlotModuleStartDiagMaskExt OCTET STRING
  recfSlotModuleBgdDiagMaskExt OCTET STRING

RecfModuleFsm16Entry  
SEQUENCE    
  recfModuleFsm16Addr SlotAddr
  recfModuleFsm16Partition OCTET STRING

RecfModuleFsm64Entry  
SEQUENCE    
  recfModuleFsm64Addr SlotAddr
  recfModuleFsm64Partition OCTET STRING

RecfModuleSgmAgEntry  
SEQUENCE    
  recfModuleSgmAgAddr SlotAddr
  recfModuleSgmAgPartition OCTET STRING

RecfModuleAsmEntry  
SEQUENCE    
  recfModuleAsmAddr SlotAddr
  recfModuleAsmPartition OCTET STRING
  recfModuleAsmCelpPartition OCTET STRING
  recfModuleAsmMinCelpPorts INTEGER
  recfModuleAsmApplType INTEGER

RecfModuleLgmEntry  
SEQUENCE    
  recfModuleLgmAddr SlotAddr
  recfModuleLgmPartition OCTET STRING

RecfModuleDsmEntry  
SEQUENCE    
  recfModuleDsmAddr SlotAddr
  recfModuleDsmPartitionMap OCTET STRING
  recfModuleDsmPbxProtocol INTEGER
  recfModuleDsmActiveLev1CDRMode INTEGER
  recfModuleDsmRecordLev1CDRMode INTEGER
  recfModuleDsmActiveLev2CDRMode INTEGER
  recfModuleDsmRecordLev2CDRMode INTEGER

RecfModDsmRecCDRLogEntry  
SEQUENCE    
  recfModDsmRecCDRLogAddr SlotAddr
  recfModDsmRecCDRLogIndex INTEGER
  recfModDsmRecCDRLogControlMode INTEGER
  recfModDsmRecCDRLogSize INTEGER
  recfModDsmRecCDRLogOvThrshld INTEGER
  recfModDsmRecCDRLogPartitionID INTEGER

RecfT1mPortEntry  
SEQUENCE    
  recfT1mPortAddr PortAddr
  recfT1mPortStartMode INTEGER
  recfT1mPortUpdate INTEGER
  recfT1mPortFraming INTEGER
  recfT1mPortLineCodeType INTEGER
  recfT1mPortDs1Option INTEGER
  recfT1mPortDsx1Distance INTEGER
  recfT1mPortEquGain INTEGER
  recfT1mPortBundleMap OCTET STRING
  recfT1mPortErrorThreshold INTEGER
  recfT1mPortSevereThreshold INTEGER
  recfT1mPortAlarmThreshold INTEGER
  recfT1mPortFailThreshold INTEGER
  recfT1mPortFailToggleRequest INTEGER
  recfT1mPortOOSBitPattern INTEGER
  recfT1mPortOOSASignaling INTEGER
  recfT1mPortOOSBSignaling INTEGER
  recfT1mPortOOSCDSignaling INTEGER
  recfT1mPortSigInversion INTEGER

RecfE1mPortEntry  
SEQUENCE    
  recfE1mPortAddr PortAddr
  recfE1mPortStartMode INTEGER
  recfE1mPortUpdate INTEGER
  recfE1mPortFraming INTEGER
  recfE1mPortCrcMultiFrame INTEGER
  recfE1mPortSigInversion INTEGER
  recfE1mPortInternationalBit INTEGER
  recfE1mPortNationalBit INTEGER
  recfE1mPortTransmitEBit INTEGER
  recfE1mPortReceiveEBit INTEGER
  recfE1mPortBundleMap OCTET STRING
  recfE1mPortErrorThreshold INTEGER
  recfE1mPortSevereThreshold INTEGER
  recfE1mPortAlarmThreshold INTEGER
  recfE1mPortFailThreshold INTEGER
  recfE1mPortFailToggleRequest INTEGER
  recfE1mPortOOSBitPattern INTEGER
  recfE1mPortOOSASignaling INTEGER
  recfE1mPortOOSBSignaling INTEGER
  recfE1mPortOOSCDSignaling INTEGER

RecfSdmPortEntry  
SEQUENCE    
  recfSdmPortAddr PortAddr
  recfSdmPortStartMode INTEGER
  recfSdmPortUpdate INTEGER
  recfSdmPortSpeed INTEGER
  recfSdmPortInterface INTEGER
  recfSdmPortTxClockSource INTEGER
  recfSdmPortBitMode INTEGER
  recfSdmPortOOSOper INTEGER
  recfSdmPortGen INTEGER
  recfSdmPortPolarity INTEGER
  recfSdmPortType INTEGER
  recfSdmPortINLNumber INTEGER
  recfSdmDeviceType INTEGER
  recfSdmPortPartitionID INTEGER
  recfSdmPortFunctions OCTET STRING
  recfSdmPortContentionSet INTEGER
  recfSdmPortLoopbackSupport INTEGER
  recfSdmPortSatelliteBuffer INTEGER
  recfSdmPortFailToggleRequest INTEGER
  recfSdmPortKGPolarity INTEGER
  recfSdmPortKGSignalType INTEGER
  recfSdmPortKGMode INTEGER

RecfBundleEntry  
SEQUENCE    
  recfBundleAddr BundleAddr
  recfBundleStartMode INTEGER
  recfBundleUpdate INTEGER
  recfBundleSignaling INTEGER
  recfBundleOOSBitPattern INTEGER
  recfBundleOOSASignaling INTEGER
  recfBundleOOSBSignaling INTEGER
  recfBundleOOSCDSignaling INTEGER
  recfBundleNullIdlePattern INTEGER
  recfBundleBwCntIdlePattern INTEGER
  recfBundleBusyOutTimer INTEGER
  recfBundleSeizureTime INTEGER
  recfBundlePreemptionTime INTEGER
  recfBundleOrgDisconnectTime INTEGER
  recfBundleAttenuationRx INTEGER
  recfBundleAttenuationTx INTEGER
  recfBundleType INTEGER
  recfBundleINLNumber INTEGER
  recfBundleDeviceType INTEGER
  recfBundleContentionSet INTEGER
  recfBundlePartitionID INTEGER
  recfBundleBwCntBusyPattern INTEGER
  recfBundleSigInversion INTEGER
  recfBundleDataPolarity INTEGER
  recfBundlePCMLaw INTEGER

RecfINLEntry  
SEQUENCE    
  recfINLNumber INTEGER
  recfINLAddr BundleAddr
  recfINLStartMode INTEGER
  recfINLUpdate INTEGER
  recfINLArqCir INTEGER
  recfINLMaxPacketDS0 INTEGER
  recfINLPacketCirOccupy INTEGER
  recfINLMaxTDMDS0 INTEGER
  recfINLGroup OCTET STRING
  recfINLCost INTEGER
  recfINLEncryption INTEGER
  recfINLSatelliteHop INTEGER
  recfINLOOSTimer INTEGER
  recfINLOrig INTEGER
  recfINLRemoteNodeID NodeAddr
  recfINLRemoteINLID INTEGER
  recfINLPartitionID INTEGER
  recfINLKGMode INTEGER

RecfTDMChannelEntry  
SEQUENCE    
  recfTDMChannelAddr ChannelAddr
  recfTDMChannelDestNodeID NodeAddr
  recfTDMChannelDestAddr ChannelAddr
  recfTDMChannelControlMode INTEGER
  recfTDMChannelUpdate INTEGER
  recfTDMChannelModuleType INTEGER
  recfTDMChannelDeviceType INTEGER
  recfTDMChannelProfile INTEGER
  recfTDMChannelOrig INTEGER
  recfTDMChannelPartitionID INTEGER
  recfTDMChannelState INTEGER
  recfTDMChannelDestCheckMode INTEGER
  recfTDMChannelConnectMode INTEGER
  recfTDMChannelSpecialPrfType INTEGER
  recfTDMChannelSpecialProfile INTEGER
  recfTDMChannelDestNodeType INTEGER

RecfFrPortEntry  
SEQUENCE    
  recfFrPortAddr PortAddr
  recfFrPortDescription DisplayString
  recfFrPortStartMode INTEGER
  recfFrPortUpdate INTEGER
  recfFrPortLmiActive INTEGER
  recfFrPortLmiPollingTimer INTEGER
  recfFrPortLmiWaitingTimer INTEGER
  recfFrPortLmiFullEnqInterval INTEGER
  recfFrPortLmiMonitoredEvents INTEGER
  recfFrPortErrorThreshold INTEGER
  recfFrPortDeviceType INTEGER
  recfFrPortAd10NodeID NodeAddr
  recfFrPortAd10PortID PortAddr
  recfFrPortBitMode INTEGER
  recfFrPortMaxFrameSize INTEGER
  recfFrPortSharedZeroFlag INTEGER
  recfFrPortMaxCIR INTEGER
  recfFrPortAvgPktSize INTEGER
  recfFrPortAllocationPref INTEGER
  recfFrPortBillingSegSize INTEGER
  recfFrPortBillingControl INTEGER
  recfFrPortPartitionID INTEGER
  recfFrPortEncodingType INTEGER

RecfFrChannelEntry  
SEQUENCE    
  recfFrChannelAddr ChannelAddr
  recfFrChannelDestNodeID NodeAddr
  recfFrChannelDestAddr ChannelAddr
  recfFrChannelControlMode INTEGER
  recfFrChannelUpdate INTEGER
  recfFrChannelType INTEGER
  recfFrChannelCirTransPriority INTEGER
  recfFrChannelCIR INTEGER
  recfFrChannelEIR INTEGER
  recfFrChannelBc INTEGER
  recfFrChannelProfile INTEGER
  recfFrChannelOrig INTEGER
  recfFrChannelPartitionID INTEGER
  recfFrChannelState INTEGER
  recfFrChannelDestCheckMode INTEGER
  recfFrChannelConnectMode INTEGER
  recfFrChannelModuleType INTEGER

RecfAd10AgmPortEntry  
SEQUENCE    
  recfAd10AgmPortAddr PortAddr
  recfAd10AgmPortStartMode INTEGER
  recfAd10AgmPortUpdate INTEGER
  recfAd10AgmPortSpeed INTEGER
  recfAd10AgmPortDef OCTET STRING
  recfAd10AgmPortPartitionID INTEGER

RecfAd10DataPortEntry  
SEQUENCE    
  recfAd10DataPortAddr Ad10PortAddr
  recfAd10DataPortStartMode INTEGER
  recfAd10DataPortUpdate INTEGER
  recfAd10DataPortPhysSlot INTEGER
  recfAd10DataPortPhysPort INTEGER
  recfAd10DataPortTDMDataRate INTEGER
  recfAd10DataPortType INTEGER

RecfAd10VoicePortEntry  
SEQUENCE    
  recfAd10VoicePortAddr Ad10PortAddr
  recfAd10VoicePortStartMode INTEGER
  recfAd10VoicePortUpdate INTEGER
  recfAd10VoicePortPhysSlot INTEGER
  recfAd10VoicePortPhysPort INTEGER
  recfAd10VoicePortDBAMode INTEGER
  recfAd10VoicePortCompressMode INTEGER
  recfAd10VoicePortFaxMode INTEGER
  recfAd10VoicePortSpeed INTEGER

RecfAd10PktBandEntry  
SEQUENCE    
  recfAd10PktBandAddr Ad10PortAddr
  recfAd10PktBandStartMode INTEGER
  recfAd10PktBandUpdate INTEGER
  recfAd10PktBandBaudRate INTEGER
  recfAd10PktBandDBAMode INTEGER

RecfAd10TrkGrpEntry  
SEQUENCE    
  recfAd10TrkGrpAddr PortAddr
  recfAd10TrkGrpStartMode INTEGER
  recfAd10TrkGrpAgmPort PortAddr
  recfAd10TrkGrpLowElement INTEGER
  recfAd10TrkGrpHighElement INTEGER
  recfAd10TrkGrpRemoteNodeID NodeAddr
  recfAd10TrkGrpRemoteAddr PortAddr
  recfAd10TrkGrpPartitionID INTEGER
  recfAd10TrkGrpSearchDirection INTEGER

RecfAsmX50PortEntry  
SEQUENCE    
  recfAsmX50PortAddr PortAddr
  recfAsmX50PortStartMode INTEGER
  recfAsmX50PortUpdate INTEGER
  recfAsmX50PortSpeed INTEGER
  recfAsmX50PortProtocol INTEGER
  recfAsmX50PortIdlePattern INTEGER
  recfAsmX50PortOosTimer INTEGER
  recfAsmX50PortPhasorSize INTEGER
  recfAsmX50PortTxHouseKbits OCTET STRING
  recfAsmX50PortCircuitMap OCTET STRING
  recfAsmX50PortPartitionID INTEGER

RecfAsmX50CkEntry  
SEQUENCE    
  recfAsmX50CkAddr AsmX50CkAddr
  recfAsmX50CkStartMode INTEGER
  recfAsmX50CkUpdate INTEGER
  recfAsmX50CkSpeed INTEGER
  recfAsmX50CkTimeSlot INTEGER
  recfAsmX50CkPhasorSize INTEGER
  recfAsmX50CkSbitConnectState INTEGER

RecfAsmVoiceTrkGrpEntry  
SEQUENCE    
  recfAsmVoiceTrkGrpAddr PortAddr
  recfAsmVoiceTrkGrpStartMode INTEGER
  recfAsmVoiceTrkGrpPort PortAddr
  recfAsmVoiceTrkGrpLowElement INTEGER
  recfAsmVoiceTrkGrpHighElement INTEGER
  recfAsmVoiceTrkGrpRemoteNodeID NodeAddr
  recfAsmVoiceTrkGrpRemoteAddr PortAddr
  recfAsmVoiceTrkGrpPartitionID INTEGER
  recfAsmVoiceTrkGrpCompressMode INTEGER
  recfAsmVoiceTrkGrpSpeed INTEGER
  recfAsmVoiceTrkGrpSignalingType INTEGER
  recfAsmVoiceTrkGrpDTMFRelay INTEGER
  recfAsmVoiceTrkGrpFaxRelay INTEGER
  recfAsmVoiceTrkGrpFaxNSFMode INTEGER
  recfAsmVoiceTrkGrpTxAudSrcMode INTEGER
  recfAsmVoiceTrkGrpRxAudOutMode INTEGER
  recfAsmVoiceTrkGrpEchoCancel INTEGER
  recfAsmVoiceTrkGrpNonLinear INTEGER
  recfAsmVoiceTrkGrpDataMode INTEGER
  recfAsmVoiceTrkGrpTxPCMGain INTEGER
  recfAsmVoiceTrkGrpRxPCMGain INTEGER
  recfAsmVoiceTrkGrpVocoderEnable INTEGER
  recfAsmVoiceTrkGrpSigIdlePttrn INTEGER
  recfAsmVoiceTrkGrpPCMPhasorSize INTEGER
  recfAsmVoiceTrkGrpSubratePhSize INTEGER
  recfAsmVoiceTrkGrpLocalSigConf INTEGER
  recfAsmVoiceTrkGrpRemoteSigConf INTEGER
  recfAsmVoiceTrkGrpRmtSigPattern INTEGER
  recfAsmVoiceTrkGrpCelpNetSigMd INTEGER
  recfAsmVoiceTrkGrpSearchDir INTEGER

RecfRtmPortEntry  
SEQUENCE    
  recfRtmPortAddr PortAddr
  recfRtmPortStartMode INTEGER
  recfRtmPortUpdate INTEGER
  recfRtmPortType INTEGER
  recfRtmPortPartitionID INTEGER

RecfRtmAdPortEntry  
SEQUENCE    
  recfRtmAdPortAddr RtmAdPortAddr
  recfRtmAdPortStartMode INTEGER
  recfRtmAdPortUpdate INTEGER
  recfRtmAdPortSpeed INTEGER
  recfRtmAdPortDataBits INTEGER
  recfRtmAdPortCommMode INTEGER
  recfRtmAdPortType INTEGER

RecfLgmPortEntry  
SEQUENCE    
  recfLgmPortAddr PortAddr
  recfLgmPortStartMode INTEGER
  recfLgmPortUpdate INTEGER
  recfLgmPortArq INTEGER
  recfLgmPortGroup OCTET STRING
  recfLgmPortEncryption INTEGER
  recfLgmPortSyncChar INTEGER
  recfLgmPortSyncLevel INTEGER
  recfLgmPortSatelliteHop INTEGER
  recfLgmPortOosTimer INTEGER
  recfLgmPortPartitionID INTEGER
  recfLgmPortBitMode INTEGER
  recfLgmPortInbandSuperrate INTEGER
  recfLgmPortInbandSubrate INTEGER
  recfLgmPortOutbandSuperrate INTEGER
  recfLgmPortOutbandSubrate INTEGER

RecfDsmIDCPortEntry  
SEQUENCE    
  recfDsmIDCPortAddr PortAddr

RecfDsmDChPortEntry  
SEQUENCE    
  recfDsmDChPortAddr PortAddr
  recfDsmDChPortStartMode INTEGER
  recfDsmDChPortUpdate INTEGER
  recfDsmDChPortPartitionID INTEGER
  recfDsmDChPortPbxProtocol INTEGER
  recfDsmDChPortPbxLayer3Type INTEGER
  recfDsmDChPortPbxLayer2Type INTEGER
  recfDsmDChPortSharedZeroFlag INTEGER
  recfDsmDChPortEncodingType INTEGER
  recfDsmDChPortActiveLev1CDRMode INTEGER
  recfDsmDChPortRecordLev1CDRMode INTEGER
  recfDsmDChPortActiveLev2CDRMode INTEGER
  recfDsmDChPortRecordLev2CDRMode INTEGER
  recfDsmDChPortCallsPerSecond INTEGER

RecfDsmDChBChEntry  
SEQUENCE    
  recfDsmDChBChAddr PortAddr
  recfDsmDChBChBundle INTEGER
  recfDsmDChBChDirection INTEGER

RecfDsmDChExchEntry  
SEQUENCE    
  recfDsmDChExchDChAddr PortAddr
  recfDsmDChExchIndex INTEGER
  recfDsmDChExchControlMode INTEGER
  recfDsmDChExchCode DisplayString

RecfDsmDChQOSEntry  
SEQUENCE    
  recfDsmDChQOSDChAddr PortAddr
  recfDsmDChQOSIndex INTEGER
  recfDsmDChQOSControlMode INTEGER
  recfDsmDChQOSLowBChan INTEGER
  recfDsmDChQOSHighBChan INTEGER
  recfDsmDChQOSLowExchCode DisplayString
  recfDsmDChQOSHighExchCode DisplayString
  recfDsmDChQOSCallType INTEGER
  recfDsmDChQOSChPrfIndex INTEGER
  recfDsmDChQOSSpecialPrfIndex INTEGER

RecfDsmDChDPNSSEntry  
SEQUENCE    
  recfDsmDChDPNSSAddr PortAddr
  recfDsmDChDPNSSNL INTEGER
  recfDsmDChDPNSSNT1 INTEGER
  recfDsmDChDPNSSNT2 INTEGER
  recfDsmDChDPNSSUnrecMsgIdle INTEGER
  recfDsmDChDPNSSInterDgtTmr INTEGER

RecfDsmDChQSigEntry  
SEQUENCE    
  recfDsmDChQSigAddr PortAddr
  recfDsmDChQSigK INTEGER
  recfDsmDChQSigN200 INTEGER
  recfDsmDChQSigT200 INTEGER
  recfDsmDChQSigT203 INTEGER
  recfDsmDChQSigT302 INTEGER
  recfDsmDChQSigT303 INTEGER
  recfDsmDChQSigT304 INTEGER
  recfDsmDChQSigT305 INTEGER
  recfDsmDChQSigT308 INTEGER
  recfDsmDChQSigT309 INTEGER
  recfDsmDChQSigT314 INTEGER
  recfDsmDChQSigT316 INTEGER
  recfDsmDChQSigT322 INTEGER

RecfLink2TraEntry  
SEQUENCE    
  recfLink2TraIndex Link2Index
  recfLink2TraStartMode INTEGER
  recfLink2TraStAddr ChannelAddr
  recfLink2TraL2Addr Link2Addr
  recfLink2TraFunctions INTEGER
  recfLink2TraPartition INTEGER

RecfHwRscEngineEntry  
SEQUENCE    
  recfHwRscEngineModuleAddr SlotAddr
  recfHwRscEngineID INTEGER
  recfHwRscEngineStartMode INTEGER
  recfHwRscEngineUpdate INTEGER
  recfHwRscEngineApplication INTEGER
  recfHwRscEnginePartitionID INTEGER

RestNestEntry  
SEQUENCE    
  restNestAddr NestAddr
  restNestDiagnostics INTEGER
  restNestStatus INTEGER
  restNestCondition INTEGER
  restNestNumberOfModules INTEGER
  restNestPowerStatus INTEGER
  restNestFanStatus INTEGER
  restNestTemperature INTEGER
  restNestClockReference1 INTEGER
  restNestClockReference2 INTEGER
  restNestBusLoopbackStatus INTEGER
  restNestSlotPresence OCTET STRING
  restNestActiveRight INTEGER
  restNestActiveLeft INTEGER
  restNestRxmCkt1Status INTEGER
  restNestRxmCkt2Status INTEGER
  restNestLxmCkt1Status INTEGER
  restNestLxmCkt2Status INTEGER

RestSlotEntry  
SEQUENCE    
  restSlotAddr SlotAddr
  restSlotModuleDiagnostics INTEGER
  restSlotModuleStatus INTEGER
  restSlotModuleFailureType INTEGER
  restSlotModuleCondition INTEGER
  restSlotSWModuleType INTEGER
  restSlotSWModuleSubType INTEGER
  restSlotModuleIDFormat INTEGER
  restSlotHWModuleType INTEGER
  restSlotHWModuleSubType INTEGER
  restSlotModuleAssemblyNum DisplayString
  restSlotModuleRevision DisplayString
  restSlotModuleSerialNum DisplayString
  restSlotModuleDateMade DisplayString
  restSlotActiveRedundantSlot SlotAddr
  restSlotModuleSWRevision DisplayString
  restSlotStartupDiagResults OCTET STRING
  restSlotBGDiagResults OCTET STRING
  restSlotNumActivePorts INTEGER
  restSlotNumNormalPorts INTEGER

RestNcpEntry  
SEQUENCE    
  restNcpAddr SlotAddr
  restNcpBootPromRevision DisplayString
  restNcpMacAddr DisplayString
  restNcpFlashObjectVersions OCTET STRING

RestNcpFlashEntry  
SEQUENCE    
  restNcpFlashAddr SlotAddr
  restNcpFlashIndex INTEGER
  restNcpFlashModuleType INTEGER
  restNcpFlashRecoveryIndicator INTEGER
  restNcpFlashCompressIndicator INTEGER
  restNcpFlashFileVersionNumber DisplayString
  restNcpFlashFileSize INTEGER
  restNcpFlashFileStoredCrc INTEGER
  restNcpFlashFileCrcCheck INTEGER

RestFsmEntry  
SEQUENCE    
  restFsmAddr SlotAddr
  restFsmBypassBandwidth INTEGER
  restFsmSourceBandwidth INTEGER
  restFsmBandwidthAvail INTEGER
  restFsmPortSpeedAvail INTEGER
  restFsmDlciTotal INTEGER
  restFsmDlciAvail INTEGER
  restFsmDlciConfig INTEGER
  restFsmBypChanTotal INTEGER
  restFsmBypChanAvail INTEGER
  restFsmCirTotal INTEGER
  restFsmCirAvail INTEGER
  restFsmVciCtrlBlkTotal INTEGER
  restFsmVciCtrlBlkAvail INTEGER
  restFsmTotalBuffers INTEGER
  restFsmBuffersAvail INTEGER
  restFsmCcfSupportIndicator INTEGER

RestSgmAgEntry  
SEQUENCE    
  restSgmAgAddr SlotAddr
  restSgmAgmPortAvail INTEGER
  restSgmAgmPortTotal INTEGER
  restSgmAgSafAvail INTEGER
  restSgmAgSafTotal INTEGER
  restSgmAgSgmScfAvail INTEGER
  restSgmAgSgmScfTotal INTEGER
  restSgmAgAgmScfAvail INTEGER
  restSgmAgAgmScfTotal INTEGER
  restSgmAgAgmCcfAvail INTEGER
  restSgmAgAgmCcfTotal INTEGER
  restSgmAgAgmPortCapacity OCTET STRING

RestAsmModuleEntry  
SEQUENCE    
  restAsmModuleAddr SlotAddr
  restAsmModuleMaxCelp INTEGER
  restAsmModuleNumCelpAvail INTEGER
  restAsmModuleTotalEngines INTEGER
  restAsmModuleAvailEngines INTEGER
  restAsmModuleTotalSafScfs INTEGER
  restAsmModuleAvailSafScfs INTEGER

RestAsmEngineEntry  
SEQUENCE    
  restAsmEngineModuleAddr SlotAddr
  restAsmEngineID INTEGER
  restAsmEngineDiagnostics INTEGER
  restAsmEngineStatus INTEGER
  restAsmEngineNumPorts INTEGER
  restAsmEngineNumSAFs INTEGER
  restAsmEngineNumSCFs INTEGER
  restAsmEngineApplication INTEGER

RestAsmModApplEntry  
SEQUENCE    
  restAsmModApplModuleAddr SlotAddr
  restAsmModApplType INTEGER
  restAsmModApplMaxPortsAllowed INTEGER
  restAsmModApplCurPortsAllowed INTEGER
  restAsmModApplCurPortsAllocated INTEGER
  restAsmModApplTotalLicenses INTEGER
  restAsmModApplAvailLicenses INTEGER
  restAsmModApplEnginesUsed INTEGER
  restAsmModApplEnginesRsvd INTEGER

RestRtmModuleEntry  
SEQUENCE    
  restRtmModuleAddr SlotAddr
  restRtmModuleDS0sUsed INTEGER
  restRtmModuleDS0sAvail INTEGER
  restRtmModuleSafsUsed INTEGER
  restRtmModuleSafsAvail INTEGER

RestDsmModuleEntry  
SEQUENCE    
  restDsmModuleAddr SlotAddr
  restDsmModuleNumDsmComms INTEGER
  restDsmModuleNumCallsProc INTEGER
  restDsmModuleNumRmtRteEntries INTEGER
  restDsmModuleNumRmtRteAvail INTEGER
  restDsmModuleNumLocRteEntries INTEGER
  restDsmModuleNumLocRteAvail INTEGER
  restDsmModuleBypassPPSTotal INTEGER
  restDsmModuleBypassPPSAvail INTEGER
  restDsmModuleBypChanTotal INTEGER
  restDsmModuleBypChanAvail INTEGER
  restDsmModuleCirTotal INTEGER
  restDsmModuleCirAvail INTEGER
  restDsmModuleVciCtrlBlkTotal INTEGER
  restDsmModuleVciCtrlBlkAvail INTEGER
  restDsmModuleTotalBuffers INTEGER
  restDsmModuleBuffersAvail INTEGER
  restDsmModuleTotalRecCDRs INTEGER
  restDsmModuleRecCDRsAvail INTEGER
  restDsmModuleTotalCallsPerSec INTEGER
  restDsmModuleCallsPerSecAvail INTEGER
  restDsmModuleCallsPerSecFactor INTEGER
  restDsmModuleBypassFactor INTEGER
  restDsmModuleTotalProcessUnits INTEGER
  restDsmModuleProcessUnitsAvail INTEGER

RestDsmModRecCDRLogEntry  
SEQUENCE    
  restDsmModRecCDRLogAddr SlotAddr
  restDsmModRecCDRLogIndex INTEGER
  restDsmModRecCDRLogStatus INTEGER
  restDsmModRecCDRLogLev1Entries INTEGER
  restDsmModRecCDRLogLev2Entries INTEGER
  restDsmModRecCDRLogClrEntries INTEGER

RestDsmModRecCDREntry  
SEQUENCE    
  restDsmModRecCDRAddr SlotAddr
  restDsmModRecCDRLogNum INTEGER
  restDsmModRecCDRIndex INTEGER
  restDsmModRecCDRContents OCTET STRING

RestDsmModExchEntry  
SEQUENCE    
  restDsmModExchAddr SlotAddr
  restDsmModExchCallNumLen INTEGER
  restDsmModExchCallNumber DisplayString
  restDsmModExchPartition INTEGER
  restDsmModExchCode DisplayString

RestDsmModRteEntry  
SEQUENCE    
  restDsmModRteAddr SlotAddr
  restDsmModRteExchCodeLen INTEGER
  restDsmModRteExchCode DisplayString
  restDsmModRtePartition INTEGER
  restDsmModRteRemoteNode NodeAddr
  restDsmModRteRemoteSlot SlotAddr
  restDsmModRteLocalPortNumber INTEGER
  restDsmModRteLocalPortAddress PortAddr

RestLgmModuleEntry  
SEQUENCE    
  restLgmModuleAddr SlotAddr
  restLgmModuleTotalSAFs INTEGER
  restLgmModuleAvailSAFs INTEGER
  restLgmModuleTotalSCFs INTEGER
  restLgmModuleAvailSCFs INTEGER

RestPortEntry  
SEQUENCE    
  restPortAddr PortAddr
  restPortDiagnostics INTEGER
  restPortStatus INTEGER
  restPortSubStatus INTEGER
  restPortCondition INTEGER
  restPortSubCondition INTEGER
  restPortType INTEGER
  restPortLoopbackType INTEGER
  restPortLoopbackDuration INTEGER
  restPortLoopbackStatus INTEGER
  restPortLoopbackInitiator INTEGER
  restPortErrorIndication INTEGER
  restPortSevereIndication INTEGER
  restPortBGDiagResults OCTET STRING
  restPortNumberOfBundles INTEGER
  restPortPhasorStatus OCTET STRING
  restPortMappedPhy PortAddr
  restPortSdmFunction OCTET STRING
  restPortSdmTFunction OCTET STRING
  restPortBundleInTone INTEGER
  restPortSdmSignalStatus INTEGER
  restPortSdmBipolarViolationInd INTEGER
  restPortCapabilities OCTET STRING

RestBundleEntry  
SEQUENCE    
  restBundleAddr BundleAddr
  restBundleDiagnostics INTEGER
  restBundleStatus INTEGER
  restBundleBwCntStatus INTEGER
  restBundleMillwattSignalABCD INTEGER
  restBundleDS0Map OCTET STRING
  restBundleSignalA INTEGER
  restBundleSignalB INTEGER
  restBundleSignalC INTEGER
  restBundleSignalD INTEGER
  restBundleOutSigA INTEGER
  restBundleOutSigB INTEGER
  restBundleOutSigC INTEGER
  restBundleOutSigD INTEGER

RestINLEntry  
SEQUENCE    
  restINLNumber INTEGER
  restINLAddr BundleAddr
  restINLDiagnostics INTEGER
  restINLStatus INTEGER
  restINLSubStatus INTEGER
  restINLLocalBERLevel INTEGER
  restINLLocalBERQuality INTEGER
  restINLRemoteNodeID NodeAddr
  restINLRemotePortAddr BundleAddr
  restINLRemoteINLID INTEGER
  restINLRemoteBERLevel INTEGER
  restINLRemoteBERQuality INTEGER
  restINLAvailableTDMBw INTEGER
  restINLAvailablePacketBw INTEGER
  restINLLoopbackDuration INTEGER
  restINLLoopbackStatus INTEGER
  restINLTotalCRCErrors INTEGER
  restINLBERWindowFill DisplayString
  restINLNumTdmCh INTEGER
  restINLNumFrCh INTEGER
  restINLSpeed INTEGER
  restINLNumSaf INTEGER
  restINLLOSMode INTEGER
  restINLBusFrameMode INTEGER

RestINLContentsEntry  
SEQUENCE    
  restINLContentsINLNumber INTEGER
  restINLContentsSeqNumber INTEGER
  restINLContentsSourceNodeID NodeAddr
  restINLContentsSourceAddr ChannelAddr
  restINLContentsDestNodeID NodeAddr
  restINLContentsDestAddr ChannelAddr

RestChannelEntry  
SEQUENCE    
  restChannelStatusAddr ChannelStatusAddr
  restChannelSourceNodeID NodeAddr
  restChannelSourceAddr ChannelAddr
  restChannelDestNodeID NodeAddr
  restChannelDestAddr ChannelAddr
  restChannelDiagnostics INTEGER
  restChannelDirectNodeConnect OCTET STRING
  restChannelDirectPathConnect OCTET STRING
  restChannelStatus INTEGER
  restChannelSubStatus INTEGER
  restChannelType INTEGER
  restChannelBandwidth INTEGER
  restChannelBypassCount INTEGER
  restChannelPath OCTET STRING
  restChannelRouteQuality INTEGER
  restChannelConnectTime INTEGER
  restChannelRetryCounter INTEGER
  restChannelLoopbackNode NodeAddr
  restChannelNodalSubratePath OCTET STRING
  restChannelDChOrigNode NodeAddr
  restChannelDChOrigAddr PortAddr
  restChannelDChTermNode NodeAddr
  restChannelDChTermAddr PortAddr
  restChannelLoopbackModAddr SlotAddr
  restChannelNetworkPath OCTET STRING

RestPktChannelEntry  
SEQUENCE    
  restPktChannelAddr ChannelAddr
  restPktChannelDiagnostics INTEGER
  restPktChannelTestGenStatus INTEGER
  restPktChannelTestGenFrSent INTEGER
  restPktChannelTestGenFrRcvOK INTEGER
  restPktChannelTestGenFrRcvErr INTEGER
  restPktChannelTestGenFrTimeOut INTEGER
  restPktChannelPingStatus INTEGER
  restPktChannelPingNumTimes INTEGER
  restPktChannelPingNumRemaining INTEGER
  restPktChannelCommStatus INTEGER

RestPktChPingEntry  
SEQUENCE    
  restPktChPingAddr ChannelAddr
  restPktChPingHopNumber INTEGER
  restPktChPingDelay INTEGER
  restPktChPingOrigTermCong INTEGER
  restPktChPingTermOrigCong INTEGER

RestAd10AgmPortEntry  
SEQUENCE    
  restAd10AgmPortAddr PortAddr
  restAd10AgmPortControl INTEGER
  restAd10AgmPortCpSpeed INTEGER
  restAd10AgmPortCpTermType INTEGER
  restAd10AgmPortCpMode INTEGER
  restAd10Date DisplayString
  restAd10Time DisplayString
  restAd10VersionLabel DisplayString
  restAd10UnitSerialNumberStr DisplayString
  restAd10UnitType INTEGER
  restAd10HWConfig OCTET STRING
  restAd10NetworkInterface INTEGER
  restAd10NetworkClockConf INTEGER
  restAd10TdmMuxSwitchStatus INTEGER
  restAd10SoftloadStatus INTEGER
  restAd10SoftloadFileSize INTEGER
  restAd10SoftloadTransferred INTEGER
  restAd10SoftloadStartTime INTEGER
  restAd10SoftloadCompletionTime INTEGER

RestAd10DataPortEntry  
SEQUENCE    
  restAd10DataPortAddr Ad10PortAddr
  restAd10DataPortDiagnostics INTEGER
  restAd10DataPortMode INTEGER
  restAd10DataPortIntfType INTEGER
  restAd10DataPortClockMode INTEGER
  restAd10DataPortClockRate INTEGER
  restAd10DataPortCtsOOS INTEGER
  restAd10DataPortCtsSig INTEGER
  restAd10DataPortDcdOOS INTEGER
  restAd10DataPortDcdSig INTEGER
  restAd10DataPortDsrOOS INTEGER
  restAd10DataPortDsrSig INTEGER
  restAd10DataPortRtsLoopDelay INTEGER
  restAd10DataPortDtrLoopDelay INTEGER
  restAd10DataPortAsyncDataBits INTEGER
  restAd10DataPortAsyncStopBits INTEGER
  restAd10DataPortAsyncParity INTEGER
  restAd10DataPortAsyncSubMode INTEGER
  restAd10DataPortAsyncSubChar INTEGER
  restAd10DataPortPktFlowControl INTEGER
  restAd10DataPortPktTxFlow INTEGER
  restAd10DataPortPktRxFlow INTEGER
  restAd10DataPortPktBuildTimeOut INTEGER
  restAd10DataPortPktRxThreshold INTEGER
  restAd10DataPortPktTxThreshold INTEGER
  restAd10DataPortPktMinRxFrag INTEGER
  restAd10DataPortBiSyncCharType INTEGER
  restAd10DataPortBiSyncParity INTEGER
  restAd10DataPortBiSyncIdleFill INTEGER
  restAd10DataPortBiSyncMinPair INTEGER
  restAd10DataPortBiSyncSyncChar INTEGER
  restAd10DataPortBiSyncPadChar INTEGER
  restAd10DataPortHdlcCrcType INTEGER
  restAd10DataPortHdlcLineCode INTEGER
  restAd10DataPortHdlcIdleFill INTEGER
  restAd10DataPortHdlcMinFlags INTEGER
  restAd10DataPortModemSigInfo OCTET STRING
  restAd10DataPortVcMapDlci INTEGER
  restAd10DataPortVcMapCir INTEGER
  restAd10DataPortTDMDataRate INTEGER
  restAd10DataPortType INTEGER
  restAd10DataPortDtrFlLpDlyDelta INTEGER
  restAd10DataPortRtsFlLpDlyDelta INTEGER

RestAd10VoicePortEntry  
SEQUENCE    
  restAd10VoicePortAddr Ad10PortAddr
  restAd10VoicePortDiagnostics INTEGER
  restAd10VoicePortMode INTEGER
  restAd10VoicePortInterface INTEGER
  restAd10VoicePortEchoCancel INTEGER
  restAd10VoicePortToneMode INTEGER
  restAd10VoicePortNonLinear INTEGER
  restAd10VoicePortEMPolarity INTEGER
  restAd10VoicePortUncfgCktSig INTEGER
  restAd10VoicePortHookStateRx INTEGER
  restAd10VoicePortHookStateTx INTEGER
  restAd10VoicePortTxLevel INTEGER
  restAd10VoicePortRcvLevel INTEGER
  restAd10VoicePortTermination INTEGER
  restAd10VoicePortWire INTEGER
  restAd10VoicePortAc15Dial INTEGER
  restAd10VoicePortTelcoIntType INTEGER
  restAd10VoicePortSpeed INTEGER
  restAd10VoicePortCompressMode INTEGER
  restAd10VoicePortFaxMode INTEGER
  restAd10VoicePortOOSAudio INTEGER
  restAd10VoicePortCelpNetSigMd INTEGER
  restAd10VoicePortCelpNetSigSt INTEGER

RestAd10PktBandEntry  
SEQUENCE    
  restAd10PktBandAddr Ad10PortAddr
  restAd10PktBandDiagnostics INTEGER
  restAd10PktBandStatMuxMode INTEGER
  restAd10PktBandMaxSegSize INTEGER
  restAd10PktBandBaudRate INTEGER
  restAd10PktBandMinBandwidth INTEGER
  restAd10PktBandCurBandwidth INTEGER
  restAd10PktBandMaxBandwidth INTEGER

RestAsmX50PortEntry  
SEQUENCE    
  restAsmX50PortAddr PortAddr
  restAsmX50PortEngine INTEGER
  restAsmX50PortRxHouseKbits OCTET STRING
  restAsmX50PortCktTimeSlotMap OCTET STRING
  restAsmX50PortAggrStatus INTEGER

RestAsmX50CkEntry  
SEQUENCE    
  restAsmX50CkAddr AsmX50CkAddr
  restAsmX50CkDiagnostics INTEGER
  restAsmX50CkSbitStatus INTEGER
  restAsmX50CkPhasorStatus OCTET STRING

RestAsmVoicePortEntry  
SEQUENCE    
  restAsmVoicePortChannelAddr ChannelAddr
  restAsmVoicePortAddr PortAddr
  restAsmVoicePortTrkGrpAddr PortAddr
  restAsmVoicePortEngine INTEGER
  restAsmVoicePortPacketSize INTEGER
  restAsmVoicePortBlockSize INTEGER
  restAsmVoicePortEchoCanceller OCTET STRING
  restAsmVoicePortDTMFRelay OCTET STRING
  restAsmVoicePortFaxRelay OCTET STRING
  restAsmVoicePortPacket OCTET STRING
  restAsmVoicePortSubratePhasor OCTET STRING
  restAsmVoicePortSignalingLOS INTEGER
  restAsmVoicePortFrameLOS INTEGER
  restAsmVoicePortCelpNetSigSt INTEGER

RestTrkGrpEntry  
SEQUENCE    
  restTrkGrpAddr PortAddr
  restTrkGrpStatus INTEGER

RestTrkGrpContentsEntry  
SEQUENCE    
  restTrkGrpContentsAddr PortAddr
  restTrkGrpContentsSequenceID INTEGER
  restTrkGrpContentsSrcNodeID NodeAddr
  restTrkGrpContentsSrcTrkGrpAddr PortAddr
  restTrkGrpContentsSrcChAddr ChannelAddr
  restTrkGrpContentsDstNodeID NodeAddr
  restTrkGrpContentsDstTrkGrpAddr PortAddr
  restTrkGrpContentsDstChAddr ChannelAddr

RestRtmPortEntry  
SEQUENCE    
  restRtmPortAddr PortAddr
  restRtmPortAdFmtRevision INTEGER
  restRtmPortAdType INTEGER
  restRtmPortAdSubtype INTEGER
  restRtmPortAdAssemblyNmb DisplayString
  restRtmPortAdMotherBrdAssmNmb DisplayString
  restRtmPortAdSerialNmb DisplayString
  restRtmPortAdManufactDate DisplayString
  restRtmPortAdRamSize INTEGER
  restRtmPortAdModDiagResult OCTET STRING
  restRtmPortAdPortDiagResult OCTET STRING
  restRtmPortAdCpMode INTEGER
  restRtmPortAdCpSpeed INTEGER

RestRtmAdPortEntry  
SEQUENCE    
  restRtmAdPortAddr RtmAdPortAddr
  restRtmAdPortDiagnostics INTEGER
  restRtmAdPortInterface INTEGER
  restRtmAdPortStopBits INTEGER
  restRtmAdPortGeneration INTEGER
  restRtmAdPortContention INTEGER
  restRtmAdPortOosOper INTEGER
  restRtmAdPortState INTEGER
  restRtmAdPortForcedFunc OCTET STRING
  restRtmAdPortLoopbackType INTEGER
  restRtmAdPortLoopbackStatus INTEGER
  restRtmAdPortElecInterface INTEGER
  restRtmAdPortElIntStatus INTEGER
  restRtmAdPortParSubstitution INTEGER
  restRtmAdPortParSubstChar INTEGER
  restRtmAdPortPhasorStatus OCTET STRING
  restRtmAdPortAdPhasorStatus OCTET STRING
  restRtmAdPortAdFunctions OCTET STRING
  restRtmAdPortParity INTEGER

RestLgmPortEntry  
SEQUENCE    
  restLgmPortAddr PortAddr
  restLgmPortLocalBERQuality INTEGER
  restLgmPortBERWindowFill DisplayString
  restLgmPortRemoteNodeID INTEGER
  restLgmPortRemotePortAddr PortAddr
  restLgmPortRemoteBERQuality INTEGER
  restLgmPortRemoteRevision INTEGER
  restLgmPortAvailableBw INTEGER
  restLgmPortUsedBw INTEGER
  restLgmPortNumCh INTEGER
  restLgmPortLgmPort PortAddr
  restLgmPortLinkSpeed INTEGER
  restLgmPortDiagnostics INTEGER
  restLgmPortSyncState INTEGER

RestLgmContentsEntry  
SEQUENCE    
  restLgmContentsAddr PortAddr
  restLgmContentsSequenceID INTEGER
  restLgmContentsSourceNodeID NodeAddr
  restLgmContentsSourceAddr ChannelAddr
  restLgmContentsDestNodeID NodeAddr
  restLgmContentsDestAddr ChannelAddr

RestSafEntry  
SEQUENCE    
  restSafAddr PortAddr
  restSafStatus INTEGER
  restSafSubStatus INTEGER
  restSafRemoteNode NodeAddr
  restSafRemoteAddr PortAddr
  restSafInlNumber INTEGER
  restSafBandwidthAvail INTEGER
  restSafNumChannels INTEGER
  restSafHWPhasorStatus OCTET STRING
  restSafSWPhasorStatus OCTET STRING
  restSafModNumChannels INTEGER
  restSafModBandwidthAvail INTEGER
  restSafDiagnostics INTEGER
  restSafFrameSwitchLocation INTEGER
  restSafFrameSwitchIndicator INTEGER
  restSafRemoteStatus INTEGER
  restSafSyncErrors Counter
  restSafOosErrors Counter
  restSafPhasorStatus OCTET STRING

RestSafContentsEntry  
SEQUENCE    
  restSafContentsAddr PortAddr
  restSafContentsSeqNum INTEGER
  restSafContentsSrcNode NodeAddr
  restSafContentsSrcAddr ChannelAddr
  restSafContentsDestNode NodeAddr
  restSafContentsDestAddr ChannelAddr

RestDsmDChPortEntry  
SEQUENCE    
  restDsmDChPortAddr PortAddr
  restDsmDChPortDiagnostics INTEGER
  restDsmDChPortNumCallsInProc INTEGER
  restDsmDChPortNumCallsConn INTEGER

RestDsmDChCallRealEntry  
SEQUENCE    
  restDsmDChCallRealAddr PortAddr
  restDsmDChCallRealBundle INTEGER
  restDsmDChCallRealCDRContents OCTET STRING
  restDsmDChCallRealDiagnostics INTEGER
  restDsmDChCallRealLayer2Status INTEGER
  restDsmDChCallRealLayer2State INTEGER
  restDsmDChCallRealLayer3State INTEGER
  restDsmDChCallRealTransitState INTEGER

RestDsmDChCallVirtEntry  
SEQUENCE    
  restDsmDChCallVirtAddr PortAddr
  restDsmDChCallVirtNumber INTEGER
  restDsmDChCallVirtCDRContents OCTET STRING
  restDsmDChCallVirtDiagnostics INTEGER
  restDsmDChCallVirtLayer2Status INTEGER
  restDsmDChCallVirtLayer2State INTEGER
  restDsmDChCallVirtLayer3State INTEGER
  restDsmDChCallVirtTransitState INTEGER

RestHwRscEngineEntry  
SEQUENCE    
  restHwRscEngineModAddr SlotAddr
  restHwRscEngineID INTEGER
  restHwRscEngineDiagnostics INTEGER
  restHwRscEngineStatus INTEGER
  restHwRscEngineApplication INTEGER
  restHwRscEngineMaxPorts INTEGER
  restHwRscEngineNumPorts INTEGER
  restHwRscEngineMaxSAFs INTEGER
  restHwRscEngineNumSAFs INTEGER
  restHwRscEngineMaxSCFs INTEGER
  restHwRscEngineNumSCFs INTEGER
  restHwRscEngineMaxLoad INTEGER
  restHwRscEngineCurLoad INTEGER
  restHwRscEngineSubStatus INTEGER

RestStatPortT1mEntry  
SEQUENCE    
  restStatPortT1mAddr PortAddr
  restStatPortT1mIndex INTEGER
  restStatPortT1mStartTime INTEGER
  restStatPortT1mErrSec INTEGER
  restStatPortT1mSevErrSec INTEGER
  restStatPortT1mBstyErrSec INTEGER
  restStatPortT1mUnavailSec INTEGER
  restStatPortT1mLostFrame INTEGER
  restStatPortT1mControlMode INTEGER

RestStatPortE1mEntry  
SEQUENCE    
  restStatPortE1mAddr PortAddr
  restStatPortE1mIndex INTEGER
  restStatPortE1mStartTime INTEGER
  restStatPortE1mErrSec INTEGER
  restStatPortE1mSevErrSec INTEGER
  restStatPortE1mBstyErrSec INTEGER
  restStatPortE1mUnavailSec INTEGER
  restStatPortE1mLostFrame INTEGER
  restStatPortE1mControlMode INTEGER

RestStatPortPktEntry  
SEQUENCE    
  restStatPortPktAddr PortAddr
  restStatPortPktControlMode INTEGER
  restStatPortPktSegmentSent Counter
  restStatPortPktSegmentRecv Counter
  restStatPortPktOctetSent Counter
  restStatPortPktOctetRecv Counter
  restStatPortPktDlciDiscard Counter
  restStatPortPktBadAddrDiscard Counter
  restStatPortPktOvrszeDiscard Counter
  restStatPortPktUnderszeDiscard Counter
  restStatPortPktCRCDiscard Counter
  restStatPortPktSwOvrRunDiscard Counter
  restStatPortPktUnderRunDiscard Counter
  restStatPortPktAbortDiscard Counter
  restStatPortPktHwOvrRunDiscard Counter
  restStatPortPktLmiSegmentSent Counter
  restStatPortPktLmiSegmentRecv Counter
  restStatPortPktLmiSyntaxErr Counter
  restStatPortPktLmiWrongSeq Counter
  restStatPortPktLmiPollTimeOut Counter
  restStatPortPktLmiWaitTimeOut Counter
  restStatPortPktLmiTxSeqNum INTEGER
  restStatPortPktLmiRxSeqNum INTEGER
  restStatPortPktLmiNumGoodEvents INTEGER
  restStatPortPktLmiNumBadEvents INTEGER
  restStatPortPktLmiEventHistory OCTET STRING

RestStatPortAsmX50Entry  
SEQUENCE    
  restStatPortAsmX50Addr PortAddr
  restStatPortAsmX50Control INTEGER
  restStatPortAsmX50RxFrameErrors Counter
  restStatPortAsmX50LocalOs Counter
  restStatPortAsmX50RemoteOs Counter

RestStatPortRtmEntry  
SEQUENCE    
  restStatPortRtmAddr PortAddr
  restStatPortRtmControl INTEGER
  restStatPortRtmUIFarEndBlkErr Counter
  restStatPortRtmUINearEndBlkErr Counter
  restStatPortRtmAdUIFarEndBlkErr Counter
  restStatPortRtmAdUINrEndBlkErr Counter
  restStatPortRtmOOSTransitions Counter

RestStatPortAsmVoiceEntry  
SEQUENCE    
  restStatPortAsmVoiceChanAddr ChannelAddr
  restStatPortAsmVoiceControl INTEGER
  restStatPortAsmVoiceFrameOOSs Counter
  restStatPortAsmVoiceSignalOOSs Counter
  restStatPortAsmVoiceHighBERs Counter

RestStatPortLgmEntry  
SEQUENCE    
  restStatPortLgmAddr PortAddr
  restStatPortLgmControlMode INTEGER
  restStatPortLgmFrameSent INTEGER
  restStatPortLgmFrameRecd INTEGER
  restStatPortLgmFrameReTx INTEGER
  restStatPortLgmFrameNak INTEGER
  restStatPortLgmBadSync INTEGER
  restStatPortLgmOosCount INTEGER
  restStatPortLgmSabmSent INTEGER
  restStatPortLgmSabmRecd INTEGER
  restStatPortLgmRnrSent INTEGER
  restStatPortLgmRnrRecd INTEGER

RestStatPortDsmDChEntry  
SEQUENCE    
  restStatPortDsmDChAddr PortAddr
  restStatPortDsmDChControlMode INTEGER
  restStatPortDsmDChOrigAttempts Counter
  restStatPortDsmDChTermAttempts Counter
  restStatPortDsmDChPbxLayer2Errs Counter
  restStatPortDsmDChPbxLayer3Errs Counter
  restStatPortDsmDChPbxLinkResets Counter
  restStatPortDsmDChPbxDisconns Counter
  restStatPortDsmDChPbxUnkExchs Counter
  restStatPortDsmDChPbxNoBws Counter
  restStatPortDsmDChPbxNoCmprs Counter
  restStatPortDsmDChPbxNoBchs Counter
  restStatPortDsmDChPbxOtherFails Counter
  restStatPortDsmDChNetDisconns Counter
  restStatPortDsmDChNetOtherFails Counter

RestStatChPktEntry  
SEQUENCE    
  restStatChPktAddr ChannelAddr
  restStatChPktSourceNodeID NodeAddr
  restStatChPktSourceChAddr ChannelAddr
  restStatChPktDestNodeID NodeAddr
  restStatChPktDestChAddr ChannelAddr
  restStatChPktControlMode INTEGER
  restStatChPktSegmentsToUser INTEGER
  restStatChPktSegmentsToNetwork INTEGER
  restStatChPktYellowThreshold INTEGER
  restStatChPktRedThreshold INTEGER
  restStatChPktCritThreshold INTEGER
  restStatChPktPortCongMode INTEGER
  restStatChPktNetCongMode INTEGER
  restStatChPktRemoteCongMode INTEGER
  restStatChPktCIRCredit INTEGER
  restStatChPktEIRCredit INTEGER
  restStatChPktFECNSent Counter
  restStatChPktBECNSent Counter
  restStatChPktPortCIRSegSent Counter
  restStatChPktPortCIRSegRcv Counter
  restStatChPktPortEIRSegSent Counter
  restStatChPktPortEIRSegRcv Counter
  restStatChPktPortCIROctetSent Counter
  restStatChPktPortCIROctetRcv Counter
  restStatChPktPortEIROctetSent Counter
  restStatChPktPortEIROctetRcv Counter
  restStatChPktPortCIRSegDrops Counter
  restStatChPktPortEIRSegDrops Counter
  restStatChPktPortCIROctetDrops Counter
  restStatChPktPortEIROctetDrops Counter
  restStatChPktNetCIRSegSent Counter
  restStatChPktNetCIRSegRcv Counter
  restStatChPktNetEIRSegSent Counter
  restStatChPktNetEIRSegRcv Counter
  restStatChPktNetCIROctetSent Counter
  restStatChPktNetCIROctetRcv Counter
  restStatChPktNetEIROctetSent Counter
  restStatChPktNetEIROctetRcv Counter
  restStatChPktNetCIRSegDrops Counter
  restStatChPktNetEIRSegDrops Counter
  restStatChPktNetCIROctetDrops Counter
  restStatChPktNetEIROctetDrops Counter
  restStatChPktSegEIRDiscard Counter
  restStatChPktSegSeqDiscard Counter
  restStatChPktSegCongPortDiscard Counter
  restStatChPktSegCongNetDiscard Counter
  restStatChPktSegExcDiscard Counter
  restStatChPktSegUnderszDiscard Counter
  restStatChPktSegV120ErrDiscard Counter
  restStatChPktSegInacPortDiscard Counter
  restStatChPktSegInacNetDiscard Counter

RestStatChPktBypEntry  
SEQUENCE    
  restStatChPktBypNodeID NodeAddr
  restStatChPktBypAddr ChannelAddr
  restStatChPktBypSourceNodeID NodeAddr
  restStatChPktBypSourceChAddr ChannelAddr
  restStatChPktBypDestNodeID NodeAddr
  restStatChPktBypDestChAddr ChannelAddr
  restStatChPktBypControlMode INTEGER
  restStatChPktBypSegmentsToSrc INTEGER
  restStatChPktBypSegmentsToDst INTEGER
  restStatChPktBypYellowThreshold INTEGER
  restStatChPktBypRedThreshold INTEGER
  restStatChPktBypCritThreshold INTEGER
  restStatChPktBypInCongMode INTEGER
  restStatChPktBypOutCongMode INTEGER
  restStatChPktBypInCIRSegSent Counter
  restStatChPktBypInCIRSegRcv Counter
  restStatChPktBypInEIRSegSent Counter
  restStatChPktBypInEIRSegRcv Counter
  restStatChPktBypInCIROctetSent Counter
  restStatChPktBypInCIROctetRcv Counter
  restStatChPktBypInEIROctetSent Counter
  restStatChPktBypInEIROctetRcv Counter
  restStatChPktBypInCIRSegDrop Counter
  restStatChPktBypInEIRSegDrop Counter
  restStatChPktBypInCIROctetDrop Counter
  restStatChPktBypInEIROctetDrop Counter
  restStatChPktBypOutCIRSegSent Counter
  restStatChPktBypOutCIRSegRcv Counter
  restStatChPktBypOutEIRSegSent Counter
  restStatChPktBypOutEIRSegRcv Counter
  restStatChPktBypOutCIROctetSent Counter
  restStatChPktBypOutCIROctetRcv Counter
  restStatChPktBypOutEIROctetSent Counter
  restStatChPktBypOutEIROctetRcv Counter
  restStatChPktBypOutCIRSegDrop Counter
  restStatChPktBypOutEIRSegDrop Counter
  restStatChPktBypOutCIROctetDrop Counter
  restStatChPktBypOutEIROctetDrop Counter
  restStatChPktBypSegSrcEIRDisc Counter
  restStatChPktBypSegDstEIRDisc Counter
  restStatChPktBypSegSrcDstConDsc Counter
  restStatChPktBypSegDstSrcConDsc Counter
  restStatChPktBypSegInacSrcDisc Counter
  restStatChPktBypSegInacDstDisc Counter

RestStatInlEntry  
SEQUENCE    
  restStatInlNumber INTEGER
  restStatInlIndex INTEGER
  restStatInlStartTime INTEGER
  restStatInlPktOctetSent INTEGER
  restStatInlPktOctetRcv INTEGER

RestStatAd10DataPortEntry  
SEQUENCE    
  restStatAd10DataPortAddr Ad10PortAddr
  restStatAd10DataPortControl INTEGER
  restStatAd10DataPortTxTotFrames Counter
  restStatAd10DataPortRxTotFrames Counter
  restStatAd10DataPortRxFrSeqErr Counter
  restStatAd10DataPortRxFrHdrErr Counter
  restStatAd10DataPortRxCongDisc Counter
  restStatAd10DataPortTxCongDisc Counter
  restStatAd10DataPortRxBecnCount Counter
  restStatAd10DataPortTxBecnCount Counter
  restStatAd10DataPortTxSCCOvrRun Counter
  restStatAd10DataPortRxSCCUndRun Counter
  restStatAd10DataPortTxSCCAbort Counter
  restStatAd10DataPortTxFrOvrSize Counter
  restStatAd10DataPortTxFifoFlCtl Counter
  restStatAd10DataPortRxMinSegHt Counter
  restStatAd10DataPortBertSynLoss Counter
  restStatAd10DataPortBertByteCnt Counter
  restStatAd10DataPortBertBitErr Counter

RestStatAd10VoicePortEntry  
SEQUENCE    
  restStatAd10VoicePortAddr Ad10PortAddr
  restStatAd10VoicePortControl INTEGER
  restStatAd10VoicePortHber Counter
  restStatAd10VoicePortSyncLoss Counter
  restStatAd10VoicePortBertByte Counter
  restStatAd10VoicePortBertBitErr Counter

RestStatAd10PktBandEntry  
SEQUENCE    
  restStatAd10PktBandAddr Ad10PortAddr
  restStatAd10PktBandControl INTEGER
  restStatAd10PktBandTxTotFrames Counter
  restStatAd10PktBandRxTotFrames Counter
  restStatAd10PktBandRxFrErr Counter
  restStatAd10PktBandRxSCCOvrRun Counter
  restStatAd10PktBandTxSCCUndRun Counter
  restStatAd10PktBandRxSCCAbort Counter
  restStatAd10PktBandRxInvDlci Counter
  restStatAd10PktBandRxFrOvrSize Counter
  restStatAd10PktBandRxCrcErr Counter

RestStatModDsmEntry  
SEQUENCE    
  restStatModDsmAddr SlotAddr
  restStatModDsmControlMode INTEGER
  restStatModDsmRejectOrigCalls Counter
  restStatModDsmRejectTermCalls Counter

AlLogEntry  
SEQUENCE    
  alLogIndex INTEGER
  alLogDiagnostics INTEGER
  alLogState INTEGER
  alLogTotalEntries INTEGER
  alLogAvailableEntries INTEGER
  alLogNotificationList OCTET STRING
  alLogClearEntries INTEGER
  alLogPartitionID INTEGER

AlLogRecEntry  
SEQUENCE    
  alLogRecIndex RecordIndex
  alLogRecContents AlarmRecord

Defined Values

timeplex 1.3.6.1.4.1.16
OBJECT IDENTIFIER    

synchrony 1.3.6.1.4.1.16.101
OBJECT IDENTIFIER    

st50 1.3.6.1.4.1.16.101.1
OBJECT IDENTIFIER    

security 1.3.6.1.4.1.16.101.1.1
OBJECT IDENTIFIER    

resource 1.3.6.1.4.1.16.101.1.2
OBJECT IDENTIFIER    

alarm 1.3.6.1.4.1.16.101.1.3
OBJECT IDENTIFIER    

reConfig 1.3.6.1.4.1.16.101.1.2.1
OBJECT IDENTIFIER    

reStatus 1.3.6.1.4.1.16.101.1.2.2
OBJECT IDENTIFIER    

reStatistics 1.3.6.1.4.1.16.101.1.2.3
OBJECT IDENTIFIER    

scPartitionHeader 1.3.6.1.4.1.16.101.1.1.1
OBJECT IDENTIFIER    

scPartitionControl 1.3.6.1.4.1.16.101.1.1.1.1
Parameter Type = Immediate.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER validateCRC(1), invalidateCRC(2)  

scPartitionCRCCheck 1.3.6.1.4.1.16.101.1.1.1.2
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER succeed(1), fail(2)  

scPartitionFlushMode 1.3.6.1.4.1.16.101.1.1.1.3
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

scSystemProfile 1.3.6.1.4.1.16.101.1.1.2
OBJECT IDENTIFIER    

scSysNodeUpdate 1.3.6.1.4.1.16.101.1.1.2.1
Parameter Type = Internal. This field will be set to loaded when the node is reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

scSysNodeControl 1.3.6.1.4.1.16.101.1.1.2.2
Parameter Type = Immediate. Validate database will set the database version number to the value used for this revision of ST software. Invalidate database will set the database version number to zero. This will flush the database when the node is reset. Update throughput will load all of the throughput values from the node access table. Update CPI profile will load the CPI system information (control, three passwords, session time-out value, and maximum number of passthru sessions.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER resetNode(3), validateDatabase(1), invalidateDatabase(2), updateThroughput(4), updateCpiProfile(5)  

scSysNodeNumber 1.3.6.1.4.1.16.101.1.1.2.3
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

scSysNodeDate 1.3.6.1.4.1.16.101.1.1.2.4
Parameter Type = Immediate. This will update the NCP RTC clock. The format of the string is mm/dd/yyyy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

scSysNodeTime 1.3.6.1.4.1.16.101.1.1.2.5
Parameter Type = Immediate. This will update the NCP RTC clock. The format of the string is hh:mm:ss.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

scSysNodeType 1.3.6.1.4.1.16.101.1.1.2.6
Parameter Type = Intrusive. A dedicated node is dedicated to a user or the CNMS. A root node is a dedicated node that serves as an active gateway to other ST nodes in the same network. A shared node is owned by the CNMS, with resources on the node allocated to multiple user partitions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rootNode(1), dedicatedNode(2), sharedNode(3)  

scSysNodePartitionID 1.3.6.1.4.1.16.101.1.1.2.7
Parameter Type = Intrusive. 1 is reserved for CNMS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

scSysNodeMasterClockPriority 1.3.6.1.4.1.16.101.1.1.2.8
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER master1(1), master2(2), master3(3), master4(4), master5(5), master6(6), master7(7), master8(8), master9(9), master10(10), master11(11), master12(12), master13(13), master14(14), master15(15), master16(16), slave(17)  

scSysNodeMasterClockList 1.3.6.1.4.1.16.101.1.1.2.9
Parameter Type = Immediate. Up to 16 master clock nodes, with two bytes used for each node number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

scSysNodeDatabaseVersion 1.3.6.1.4.1.16.101.1.1.2.10
Parameter Type = Internal. Nonvolatile RAM database version number. If this number does not match the internal version number used for the revision of NCP code running at node startup, then the database will be flushed. In this event, the user can reconfigure the node and reset it to put the node back into operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

scSysNodeDefaultRoot 1.3.6.1.4.1.16.101.1.1.2.11
Parameter Type = Immediate. Used by the trap generator to send traps if there is no alLogNotificationList specified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

scSysNodeCpiProfileUpdate 1.3.6.1.4.1.16.101.1.1.2.12
Parameter Type = Internal. Indicates whether the CPI password control, the CPI session timeout time, the CPI maximum number of passthru sessions, or any of the three CPI passwords have been changed since the last update CPI profile command was invoked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateCpiProfileReq(2)  

scSysNodeCpiPasswordControl 1.3.6.1.4.1.16.101.1.1.2.13
Parameter Type = Non-intrusive. Indicates whether CPI access is controlled using passwords or not. This field and the three CPI passwords apply to CPI access through the CPI port, through the modem port, and through access devices. The enablePassthru value shall disable password control for the CPI and modem ports, but enable it for access devices.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), enablePassthru(3)  

scSysNodeCpiPasswordLevel1 1.3.6.1.4.1.16.101.1.1.2.14
Parameter Type = Non-intrusive. This password allows both read and write access to both local and remote nodes if password control is enabled. It applies to users accessing the node from the CPI port, modem port, or an access device.
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString Size(1..16)  

scSysNodeCpiPasswordLevel2 1.3.6.1.4.1.16.101.1.1.2.15
Parameter Type = Non-intrusive. This password allows both read and write access to the local node and read-only access to remote nodes if password control is enabled. It applies to users accessing the node from the CPI port, modem port, or an access device.
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString Size(1..16)  

scSysNodeCpiPasswordLevel3 1.3.6.1.4.1.16.101.1.1.2.16
Parameter Type = Non-intrusive. This password allows read-only access to both local and remote nodes if password control is enabled. It applies to users accessing the node from the CPI port, modem port, or an access device.
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString Size(1..16)  

scSysNodeCpiSessionTimeOut 1.3.6.1.4.1.16.101.1.1.2.17
Parameter Type = Non-intrusive. CPI session will terminate when no request is made for number of minutes given by this value. For the CPI port, this time-out only occurs if password control is enabled. For the modem port, the session can terminate regardless of the password control state, and the port will be switch to an NMS session in SLIP mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1440  

scSysNodeCpiMaxPassthruSessions 1.3.6.1.4.1.16.101.1.1.2.18
Parameter Type = Non-intrusive. This value indicates the maximum number of CPI access device passthru sessions that can be active simultaneously.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

scRootAccessTable 1.3.6.1.4.1.16.101.1.1.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScRootAccessEntry

scRootAccessEntry 1.3.6.1.4.1.16.101.1.1.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScRootAccessEntry  

scRootAccessIndex 1.3.6.1.4.1.16.101.1.1.3.1.1
Parameter Type = Internal. Up to 16 EMS stations can access the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

scRootAccessControlMode 1.3.6.1.4.1.16.101.1.1.3.1.2
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

scRootAccessIp 1.3.6.1.4.1.16.101.1.1.3.1.3
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scNodeAccessTable 1.3.6.1.4.1.16.101.1.1.4
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScNodeAccessEntry

scNodeAccessEntry 1.3.6.1.4.1.16.101.1.1.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScNodeAccessEntry  

scNodeAccessIndex 1.3.6.1.4.1.16.101.1.1.4.1.1
Parameter Type = Internal. Maximum of 32 partitions per node. If the node is a dedicated CNMS node, only the entry for CNMS (partition ID 1) exists. The rest of the entries are empty. If the node is a dedicated user node, only the entries for CNMS (partition 1) and the partition ID of the user exist. The rest of the entries are empty. If the node is a shared node, the entry for CNMS (partition 1) always exists. Thirty-one other entries with partitions 2 through 1023 can be created. These entries represent user partitions that have access to the node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

scNodeAccessControlMode 1.3.6.1.4.1.16.101.1.1.4.1.2
Parameter Type = Immediate. Full access will only check the requester's partition ID. Table access will use the root node list to verify the requester's partition ID and node number. Disable means that the entry is not in effect. The CNMS entry cannot be set to disable. Erase will erase this entry. The CNMS entry cannot be set to erase.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fullAccess(59), tableAccess(60), disable(2), erase(3)  

scNodeAccessUpdate 1.3.6.1.4.1.16.101.1.1.4.1.3
Parameter Type = Internal. Indicates whether current throughput value has been loaded. Load all throughput values using scSysNodeControl(updateThroughput).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateThroughputReq(3)  

scNodeAccessRootList 1.3.6.1.4.1.16.101.1.1.4.1.4
Parameter Type = Immediate. A list of up to 16 root nodes (2 bytes per node number) within the partition that have access to this node. This list is only used if the control mode is set to table access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

scNodeAccessChPrfList 1.3.6.1.4.1.16.101.1.1.4.1.5
Parameter Type = Immediate. A bit map representing which channel profiles (1-255) are assigned to this partition. The rightmost bit of the rightmost octet (lsb of the last byte), represents channel profile 1. A channel profile can be assigned to multiple partitions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

scNodeAccessThroughput 1.3.6.1.4.1.16.101.1.1.4.1.6
Parameter Type = Intrusive. Access bandwidth for this partition, in units of bps. This field is only used on a shared node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scNodeAccessVoicePrfList 1.3.6.1.4.1.16.101.1.1.4.1.7
Parameter Type = Immediate. INTRODUCED 2.0.0 A bit map representing which voice profiles (1-255) are assigned to this partition. The rightmost bit of the rightmost octet (lsb of the last byte), represents voice profile 1. A voice profile can be assigned to multiple partitions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

scNodeAccessLink2TraEntriesMin 1.3.6.1.4.1.16.101.1.1.4.1.8
Parameter Type = Immediate. INTRODUCED 2.0.0 Defines the number of LINK translation table entries, that are reserved for this partition. The sum of the values of this attribute across all the partitions may not exceed the maximum number of entries available (1728). This attribute may be set only by the global user (partition 1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1728  

scNodeAccessLink2TraEntriesMax 1.3.6.1.4.1.16.101.1.1.4.1.9
Parameter Type = Immediate. INTRODUCED 2.0.0 Defines the limit of the number of LINK translation table entries that may be used by this partition. This number of the LINK translation table entries may or may not be available for this partition, depending on the rest of the partitions user's activities. The sum of the values of this attribute across all the partitions may exceed the maximum number of entries available (1728). This attribute may be set only by the global user (partition 1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1728  

scCommunityTable 1.3.6.1.4.1.16.101.1.1.5
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScCommunityEntry

scCommunityEntry 1.3.6.1.4.1.16.101.1.1.5.1
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  ScCommunityEntry  

scCommunityIndex 1.3.6.1.4.1.16.101.1.1.5.1.1
Parameter Type = Internal. Format is partition ID (1-1023):entry ID (1-5). Only 32 partitions can be entered, each with 5 entries.
Status: deprecated Access: read-only
OBJECT-TYPE    
  RecordIndex  

scCommunityControlMode 1.3.6.1.4.1.16.101.1.1.5.1.2
Parameter Type = Immediate. A community entry cannot be erased if it is enabled. Community entry 1.1 cannot be disabled or erased.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

scCommunityName 1.3.6.1.4.1.16.101.1.1.5.1.3
Parameter Type = Immediate.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..24)  

scCommunityscMap 1.3.6.1.4.1.16.101.1.1.5.1.4
Parameter Type = Immediate. Represents which groups in the security MIB this community has access to. For each octet, 1 means no access, 2 means read-only, and 3 means read-write. OCTET 1: partition header OCTET 2: system profile OCTET 3: root access OCTET 4: node access OCTET 5: community OCTET 6: trap access OCTET 7: channel profile OCTET 8: softload OCTET 9: CPI access OCTET 10: modem port access OCTET 11: IP access.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(11)  

scCommunityrecfMap 1.3.6.1.4.1.16.101.1.1.5.1.5
Parameter Type = Immediate. Represents which groups in the resource configuration MIB this community has access to. For each octet, 1 means no access, 2 means read-only, and 3 means read-write. OCTET 1: partition header OCTET 2: node OCTET 3: nest OCTET 4: slot OCTET 5: module OCTET 6: port OCTET 7: bundle OCTET 8: INL OCTET 9: TDM channel OCTET 10: frame relay OCTET 11: ad10 OCTET 12: ASM X.50, ADPCM, CELP OCTET 13: RTM port, RTM AD port.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(13)  

scCommunityrestMap 1.3.6.1.4.1.16.101.1.1.5.1.6
Parameter Type = Immediate. Represents which groups in the resource status MIB this community has access to. For each octet, 1 means no access, 2 means read-only, and 3 means read-write. OCTET 1: node OCTET 2: nest OCTET 3: slot OCTET 4: module OCTET 5: port OCTET 6: bundle OCTET 7: INL OCTET 8: INL contents OCTET 9: channel OCTET 10: ad10 OCTET 11: ASM X.50, ADPCM, CELP.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(11)  

scCommunityrestatisticsMap 1.3.6.1.4.1.16.101.1.1.5.1.7
Parameter Type = Immediate. Represents which groups in the resource statistics MIB this community has access to. For each octet, 1 means no access, 2 means read-only, and 3 means read-write. OCTET 1: port OCTET 2: channel OCTET 3: INL OCTET 4: ad10.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

scCommunityalMap 1.3.6.1.4.1.16.101.1.1.5.1.8
Parameter Type = Immediate. Represents which groups in the alarm MIB this community has access to. For each octet, 1 means no access, 2 means read-only, and 3 means read-write. OCTET 1: partition header OCTET 2: alarm profile OCTET 3: log OCTET 4: log records.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

scTrapAccessTable 1.3.6.1.4.1.16.101.1.1.6
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScTrapAccessEntry

scTrapAccessEntry 1.3.6.1.4.1.16.101.1.1.6.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScTrapAccessEntry  

scTrapAccessIndex 1.3.6.1.4.1.16.101.1.1.6.1.1
Parameter Type = Internal. Indicates which of up to 8 EMS stations will receive traps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

scTrapAccessControlMode 1.3.6.1.4.1.16.101.1.1.6.1.2
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

scTrapAccessIp 1.3.6.1.4.1.16.101.1.1.6.1.3
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scChProfileTable 1.3.6.1.4.1.16.101.1.1.7
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScChProfileEntry

scChProfileEntry 1.3.6.1.4.1.16.101.1.1.7.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScChProfileEntry  

scChProfileIndex 1.3.6.1.4.1.16.101.1.1.7.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

scChProfileControlMode 1.3.6.1.4.1.16.101.1.1.7.1.2
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

scChProfileCostType 1.3.6.1.4.1.16.101.1.1.7.1.3
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER hops(1), userDesignatedCost(2), queuingDelay(3), delayAndCost(4)  

scChProfileMaxCost 1.3.6.1.4.1.16.101.1.1.7.1.4
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scChProfilePriority 1.3.6.1.4.1.16.101.1.1.7.1.5
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

scChProfileEncryption 1.3.6.1.4.1.16.101.1.1.7.1.6
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER doNotCare(1), required(2)  

scChProfileMaxSatHop 1.3.6.1.4.1.16.101.1.1.7.1.7
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

scChProfileErrPerformReq 1.3.6.1.4.1.16.101.1.1.7.1.8
Parameter Type = Immediate. Error performance requirement (x) used as 10E-(x). Range 10E-4 to 10E-9.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4..9  

scChProfileINLGroup 1.3.6.1.4.1.16.101.1.1.7.1.9
Parameter Type = Immediate. 0 means do not care.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

scChProfileOverrideMode 1.3.6.1.4.1.16.101.1.1.7.1.10
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

scChProfileRetryTimer 1.3.6.1.4.1.16.101.1.1.7.1.11
Parameter Type = Immediate. Each unit represents 5 seconds. Retry range is 5 seconds to 5 minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

scChProfileInfoAlarmGen 1.3.6.1.4.1.16.101.1.1.7.1.12
Parameter Type = Immediate. Indicates whether channel alarms of severity info will be generated or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

scSoftloadEntry 1.3.6.1.4.1.16.101.1.1.8
OBJECT IDENTIFIER    

scSoftloadControl 1.3.6.1.4.1.16.101.1.1.8.1
Parameter Type = Immediate. is the command to initiate download from EMS, local CPS, or another ST node to online FLASH memory location. is the command to initiate online image copy from offline FLASH memory location (not mapped by the NCP map file) to the online one (mapped by the NCP map file). is the command to initiate download from EMS, local CPS, or another ST node to offline FLASH memory location.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER startDownload(1), onlineCopy(2), startDownloadToRecovery(3)  

scSoftloadFileName 1.3.6.1.4.1.16.101.1.1.8.2
Parameter Type = Immediate. Specifies the file on EMS or CPS station to be downloaded into NCP program store. The type of code in the file is indicated by scSoftloadSoftwareType.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

scSoftloadDirectoryName 1.3.6.1.4.1.16.101.1.1.8.3
Parameter Type = Immediate. Specifies the directory path where the file that is to be downloaded resides on the EMS or CPS station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

scSoftloadDestPort 1.3.6.1.4.1.16.101.1.1.8.4
Parameter Type = Immediate. Destination module/port for downloading software. If module address, then format is nest:slot:0. If the address is 0:0:0, then the file will be downloaded to the active NCP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortAddr  

scSoftloadSoftwareType 1.3.6.1.4.1.16.101.1.1.8.5
Parameter Type = Immediate. Identifies the module type for downloading software or database image.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ncp(1), t1m(5), e1m(6), sgm(7), lgm(8), asm(9), fsm(11), sdm(12), rtm(14), dsm(19), e3m(20), ad10(128), tableOC(254), mibSchema(252), stDatabase(255), ad10Database(251), rtmAdDatabase(253)  

scSoftloadEmsNodeID 1.3.6.1.4.1.16.101.1.1.8.6
Parameter Type = Immediate. Root node ID for the source EMS or ST node. Only used if scSoftloadSourceEmsIp is not 1.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

scSoftloadSourceEmsIp 1.3.6.1.4.1.16.101.1.1.8.7
Parameter Type = Immediate. Indicates the download server. If the value is 1.0.0.0, then CPS is being used. If value is 2.0.0.0, then another ST node is being used, whose node ID is specified in scSoftloadEmsNodeID. Otherwise, the EMS is being used, with access through the root node specified in scSoftloadEmsNodeID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scSoftloadTimeout 1.3.6.1.4.1.16.101.1.1.8.8
Parameter Type = Immediate. In units of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..300  

scCpiAccess 1.3.6.1.4.1.16.101.1.1.9
OBJECT IDENTIFIER    

scCpiControl 1.3.6.1.4.1.16.101.1.1.9.1
Parameter Type = Immediate. Log off will terminate a session that was enabled by entering a password. If password control is disabled, then the command will do nothing. Reset will load the new CPI port settings. As a side effect, the current session will be logged off.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER resetCpiPort(3), logoff(40)  

scCpiControlUpdate 1.3.6.1.4.1.16.101.1.1.9.2
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

scCpiSpeed 1.3.6.1.4.1.16.101.1.1.9.3
Parameter Type = Intrusive. In units of bps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a2400(1), a4800(2), a9600(3), a14400(4), a19200(5)  

scCpiDataBits 1.3.6.1.4.1.16.101.1.1.9.4
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b7(1), b8(2)  

scCpiParity 1.3.6.1.4.1.16.101.1.1.9.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noParity(1), even(3), odd(2)  

scCpiStopBits 1.3.6.1.4.1.16.101.1.1.9.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b1(1), b2(2)  

scModemAccess 1.3.6.1.4.1.16.101.1.1.10
OBJECT IDENTIFIER    

scModemControl 1.3.6.1.4.1.16.101.1.1.10.1
Parameter Type = Immediate. Log off will terminate a session that was enabled by entering a password. If password control is disabled, then the command will do nothing. Reset will load the new CPI port settings. As a side effect, the current session will be logged off. Enable CPS session will switch the modem port from SLIP mode to CPI mode. The mode will be changed back to SLIP after a nodal power cycle or a reset modem port command.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER enableCpsSession(1), resetModemPort(3), logoff(40)  

scModemControlUpdate 1.3.6.1.4.1.16.101.1.1.10.2
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

scModemSpeed 1.3.6.1.4.1.16.101.1.1.10.3
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a2400(1), a4800(2), a9600(3), a14400(4), a19200(5)  

scModemDataBits 1.3.6.1.4.1.16.101.1.1.10.4
Parameter Type = Intrusive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER b8(2)  

scModemParity 1.3.6.1.4.1.16.101.1.1.10.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noParity(1), even(3), odd(2)  

scModemStopBits 1.3.6.1.4.1.16.101.1.1.10.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b1(1), b2(2)  

scModemControlLead 1.3.6.1.4.1.16.101.1.1.10.7
Parameter Type = Intrusive. This field is not currently used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eIA(1), noEIA(2)  

scIpAccess 1.3.6.1.4.1.16.101.1.1.11
OBJECT IDENTIFIER    

scIpProfile 1.3.6.1.4.1.16.101.1.1.11.1
OBJECT IDENTIFIER    

scIpControl 1.3.6.1.4.1.16.101.1.1.11.1.1
Parameter Type = Immediate.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER resetIp(1)  

scIpControlUpdate 1.3.6.1.4.1.16.101.1.1.11.1.2
Parameter Type = Internal. Indicates changes to both the IP profile and the IP offline subnet table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

scIpWANIpAddress 1.3.6.1.4.1.16.101.1.1.11.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

scIpSubNetworkMask 1.3.6.1.4.1.16.101.1.1.11.1.4
Parameter Type = Intrusive. Network ID mask for ST-50 network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scIpRootGatewayIp 1.3.6.1.4.1.16.101.1.1.11.1.5
Parameter Type = Intrusive. Root node Ethernet port IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scIpRootGatewayMask 1.3.6.1.4.1.16.101.1.1.11.1.6
Parameter Type = Intrusive. Network mask for root node's Ethernet port. This is the mask for the user's IP network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scIpRootGatewayEthernet 1.3.6.1.4.1.16.101.1.1.11.1.7
Parameter Type = Intrusive. Specifies the Ethernet protocol of the user's IP network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernetII(2), e802d3(1)  

scIpDefaultExtGateway 1.3.6.1.4.1.16.101.1.1.11.1.8
Parameter Type = Intrusive. Default gateway IP address used by the root node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scIpSlipAddress 1.3.6.1.4.1.16.101.1.1.11.1.9
Parameter Type = Intrusive. IP address of the SLIP interface on the modem port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scIpSlipMask 1.3.6.1.4.1.16.101.1.1.11.1.10
Parameter Type = Intrusive. IP mask of the SLIP interface on the modem port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scIpOnlineSubnetTable 1.3.6.1.4.1.16.101.1.1.11.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScIpOnlineSubnetEntry

scIpOnlineSubnetEntry 1.3.6.1.4.1.16.101.1.1.11.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScIpOnlineSubnetEntry  

scIpOnlineSubnetIndex 1.3.6.1.4.1.16.101.1.1.11.2.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

scIpOnlineSubnetAddr 1.3.6.1.4.1.16.101.1.1.11.2.1.2
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

scIpOfflineSubnetTable 1.3.6.1.4.1.16.101.1.1.11.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScIpOfflineSubnetEntry

scIpOfflineSubnetEntry 1.3.6.1.4.1.16.101.1.1.11.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScIpOfflineSubnetEntry  

scIpOfflineSubnetIndex 1.3.6.1.4.1.16.101.1.1.11.3.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

scIpOfflineSubnetControl 1.3.6.1.4.1.16.101.1.1.11.3.1.2
Parameter Type = Intrusive.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER erase(3)  

scIpOfflineSubnetAddr 1.3.6.1.4.1.16.101.1.1.11.3.1.3
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

scLgmStaticRouteTable 1.3.6.1.4.1.16.101.1.1.12
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScLgmStaticRouteEntry

scLgmStaticRouteEntry 1.3.6.1.4.1.16.101.1.1.12.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScLgmStaticRouteEntry  

scLgmStaticRouteNode 1.3.6.1.4.1.16.101.1.1.12.1.1
Parameter Type = Internal. Routing destination node number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

scLgmStaticRouteIndex 1.3.6.1.4.1.16.101.1.1.12.1.2
Parameter Type = Internal. Specifies a route entry number in the routing table for given node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

scLgmStaticRouteStartMode 1.3.6.1.4.1.16.101.1.1.12.1.3
Parameter Type = Immediate. Setting to off will prevent this table entry from being used on routing (invalidates it). Setting to erase will free the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

scLgmStaticRouteNextIafHop 1.3.6.1.4.1.16.101.1.1.12.1.4
Parameter Type = Immediate. Specifies next hop along given route. The hops are presented in terms of Link-2 IAFs. It is, in fact, LGM port number (server type 132 without further specification of a group ID), which is local to this node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32767  

scLgmStaticRouteLink2GwyNode 1.3.6.1.4.1.16.101.1.1.12.1.5
Parameter Type = Immediate. Specifies Link-2 gateway node (node which has a LGM module) to get access into Link-2 subnetwork.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

scLgmStaticRoutePathDelay 1.3.6.1.4.1.16.101.1.1.12.1.6
Parameter Type = Immediate. Defines the number of Link-2 nodes (non-ST-50 hops) to this node. No ST-50 INLs are counted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

scVoicePrf 1.3.6.1.4.1.16.101.1.1.13
OBJECT IDENTIFIER    

scVoicePrfNetTable 1.3.6.1.4.1.16.101.1.1.13.1
Voice profile entries in this table will serve as a network wide profile for multiple voice connections across the network. Even though it is not enforced by the node, it is suggested that such enforcement be provided by Network Management. A given index refers to the same voice profile in both this MIB section and scVoicePrfNodeTable. When a new voice profile is created in one section it will also be created with the proper default values in the other. Entry number one in this table shall always exist on the node. It will be initialized with all default values of this section except scVoicePrfNetControlMode shal be enable. This entry cannot be disabled or erased. Changes for all entries will take effect immediately on new connections. However, they will not affect channels that are already connected.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScVoicePrfNetEntry

scVoicePrfNetEntry 1.3.6.1.4.1.16.101.1.1.13.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScVoicePrfNetEntry  

scVoicePrfNetIndex 1.3.6.1.4.1.16.101.1.1.13.1.1.1
Parameter Type = Internal. Index of the voice profile entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

scVoicePrfNetControlMode 1.3.6.1.4.1.16.101.1.1.13.1.1.2
Parameter Type = Immediate. Disable will prevent this voice profile from being applied to the any new voice connections. Erase will remove this voice profile from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

scVoicePrfNetCompressMode 1.3.6.1.4.1.16.101.1.1.13.1.1.3
Parameter Type = Immediate. Defines which compression algorithm to use for voice channels connected using this voice profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tCelp(1), atc(2), adpcm(3), pcm(255)  

scVoicePrfNetSpeed 1.3.6.1.4.1.16.101.1.1.13.1.1.4
Parameter Type = Immediate. The compressed channel data rate for any voice subrate connections using this voice profile. For channels using a CELP compression algorithm, only speeds of 5.333 Kbps, 7.2 Kbps, 8 Kbps, and 9.6 Kbps will be supported. For channels using the ATC compression algorithm, only the speeds between 7.466 Kbps and 32 Kbps (in increments of 533 bps) is supported. For channels using the ADPCM compression algorithm, only the speeds 31.733 and 32.000 Kbps is supported. For channels using PCM (uncompressed mode), only the speed of 64 Kbps is supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b5333(40), b7200(54), b7466(56), b8000(60), b8533(64), b9066(68), b9600(72), b10133(76), b10666(80), b11200(84), b11733(88), b12266(92), b12800(96), b13333(100), b13866(104), b14400(108), b14933(112), b15466(116), b16000(120), b16533(124), b17066(128), b17600(132), b18133(136), b18666(140), b19200(144), b19733(148), b20266(152), b20800(156), b21333(160), b21866(164), b22400(168), b22933(172), b23466(176), b24000(180), b24533(184), b25066(188), b25600(192), b26133(196), b26666(200), b27200(204), b27733(208), b28266(212), b28800(216), b29333(220), b29866(224), b30400(228), b30933(232), b31466(236), b31733(238), b32000(240), b36000(270), b64000(480)  

scVoicePrfNetDTMFRelay 1.3.6.1.4.1.16.101.1.1.13.1.1.5
Parameter Type = Immediate. Controls the DTMF relay on any voice connections that use this voice profile. When enabled, DTMF signals are transferred through the connection. Not applicable in PCM and ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

scVoicePrfNetFaxRelay 1.3.6.1.4.1.16.101.1.1.13.1.1.6
Parameter Type = Immediate. Controls the fax relay on any voice connections that use this voice profile. When enabled, fax operation will be supported over the connection. Not applicable in PCM and ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

scVoicePrfNetFaxNSFMode 1.3.6.1.4.1.16.101.1.1.13.1.1.7
Parameter Type = Immediate. Controls the non-standard fax mode on any voice connections that use this voice profile. Not applicable in PCM and ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

scVoicePrfNetVocoderEnable 1.3.6.1.4.1.16.101.1.1.13.1.1.8
Parameter Type = Immediate. Controls the vocoder mode on any voice connections that use this voice profile. Not applicable in PCM and ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), disable(2)  

scVoicePrfNetDataMode 1.3.6.1.4.1.16.101.1.1.13.1.1.9
Parameter Type = Immediate. Controls the 2100 Hz detection logic and data mode operation with the ATC vocoder on any voice connections that use this voice profile. Applies only for ATC mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

scVoicePrfNetSignalingType 1.3.6.1.4.1.16.101.1.1.13.1.1.10
Parameter Type = Immediate. The type of signaling used by the T1M/E1M bundles that connect to voice ports using this voice profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), a(2), ab(3), abcd(4), ac15-dtmf(8), ac15-dp(9)  

scVoicePrfNetSigIdlePttrn 1.3.6.1.4.1.16.101.1.1.13.1.1.11
Parameter Type = Immediate. Defines the idle signaling pattern on any ASM voice ports that use this voice profile. This pattern is delivered to receive signal channel connections at times prior to the availability of a verified reliable signal channel source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a0-b0-c0-d0(16), a0-b0-c0-d1(8), a0-b0-c1-d0(4), a0-b0-c1-d1(12), a0-b1-c0-d0(2), a0-b1-c0-d1(10), a0-b1-c1-d0(6), a0-b1-c1-d1(14), a1-b0-c0-d0(1), a1-b0-c0-d1(9), a1-b0-c1-d0(5), a1-b0-c1-d1(13), a1-b1-c0-d0(3), a1-b1-c0-d1(11), a1-b1-c1-d0(7), a1-b1-c1-d1(15)  

scVoicePrfNodeTable 1.3.6.1.4.1.16.101.1.1.13.2
Voice profile entries in this table will serve as a nodal part of profile for voice connections. It is intended for individual fine adjustment of the voice parameters on each end of the connection. A given index refers to the same voice profile in both this MIB section and scVoicePrfNetTable. When a new voice profile is created in one section it will also be created with the proper default values in the other. Changes for all entries will take effect immediately on new connections. However, they will not affect channels that are already connected.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScVoicePrfNodeEntry

scVoicePrfNodeEntry 1.3.6.1.4.1.16.101.1.1.13.2.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScVoicePrfNodeEntry  

scVoicePrfNodeIndex 1.3.6.1.4.1.16.101.1.1.13.2.1.1
Parameter Type = Internal. Index of the voice profile entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

scVoicePrfNodeRdnGrpId 1.3.6.1.4.1.16.101.1.1.13.2.1.2
Parameter Type = Immediate. Specifies the redundancy group value of the server module that the voice port will be allocated on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..64  

scVoicePrfNodeTxAudSrcMode 1.3.6.1.4.1.16.101.1.1.13.2.1.3
Parameter Type = Immediate. Controls the transmit audio source on any voice connections that use this voice profile. Not applicable in PCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), silence(2), toneDMW(3)  

scVoicePrfNodeRxAudOutMode 1.3.6.1.4.1.16.101.1.1.13.2.1.4
Parameter Type = Immediate. Controls the receive audio output on any voice connections that use this voice profile. Not applicable in PCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), silence(2), toneDMW(3)  

scVoicePrfNodeEchoCancel 1.3.6.1.4.1.16.101.1.1.13.2.1.5
Parameter Type = Immediate. Controls the echo cancellation on any voice connections that use this voice profile. Not applicable in PCM and ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

scVoicePrfNodeNonLinear 1.3.6.1.4.1.16.101.1.1.13.2.1.6
Parameter Type = Immediate. Controls the non-linear processing inside the echo canceller on any voice connections that use this voice profile. Not applicable in PCM and ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

scVoicePrfNodeTxPCMGain 1.3.6.1.4.1.16.101.1.1.13.2.1.7
Parameter Type = Immediate. Controls the transmit PCM gain on any voice connections that use this voice profile. Range is defined from -33.0 dB to +18.0 dB with .2 dB increments. Default is 0 dB. Not applicable in PCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

scVoicePrfNodeRxPCMGain 1.3.6.1.4.1.16.101.1.1.13.2.1.8
Parameter Type = Immediate. Controls the receive PCM gain on any voice connections that use this voice profile. Range is defined from -33.0 dB to +18.0 dB with .2 dB increments. Default is 0 dB. Not applicable in PCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

scVoicePrfNodePCMPhasorSize 1.3.6.1.4.1.16.101.1.1.13.2.1.9
Parameter Type = Immediate. Size of the phasor (in bytes) on the PCM (64K) side of any voice connections using this voice profile. Not applicable in PCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4..255  

scVoicePrfNodeSubratePhSize 1.3.6.1.4.1.16.101.1.1.13.2.1.10
Parameter Type = Immediate. Size of the phasor (in bytes) on the subrate side of any voice connections using this voice profile. Not applicable in PCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4..100  

scVoicePrfNodeNetSigMode 1.3.6.1.4.1.16.101.1.1.13.2.1.11
Parameter Type = Immediate. Enable autodetection of CELP/ATC channel connected equipment so as to automatically change format to become compatible with either LINK (5 byte) or ST (8 byte) channel modes. Alternately, this parameter hard sets CELP/ATC channels to be compatible only with either LINK or ST mode compatible equipment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), st(2), link(3)  

scCmntyAccess 1.3.6.1.4.1.16.101.1.1.14
OBJECT IDENTIFIER    

scCmntyAccessTable 1.3.6.1.4.1.16.101.1.1.14.1
Represents the common attributes of multiple community tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScCmntyAccessEntry

scCmntyAccessEntry 1.3.6.1.4.1.16.101.1.1.14.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScCmntyAccessEntry  

scCmntyAccessIndex 1.3.6.1.4.1.16.101.1.1.14.1.1.1
Parameter Type = Internal. Format is: partition ID (1-1023):entry ID (1-5). Only 32 partitions can be entered, each with 5 entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RecordIndex  

scCmntyAccessControlMode 1.3.6.1.4.1.16.101.1.1.14.1.1.2
Parameter Type = Immediate. A community entry cannot be erased if it is enabled. Community entry 1.1 cannot be disabled or erased.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

scCmntyAccessCommunityName 1.3.6.1.4.1.16.101.1.1.14.1.1.3
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..24)  

scCmntyMib2Table 1.3.6.1.4.1.16.101.1.1.14.2
Community profile table for MIB-II sections that are supported by ST. A community profile entry will define which sections of MIB-II a user has access to based upon the community name that the user has specified.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScCmntyMib2Entry

scCmntyMib2Entry 1.3.6.1.4.1.16.101.1.1.14.2.1
INTRODUCED 2.0.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScCmntyMib2Entry  

scCmntyMib2Index 1.3.6.1.4.1.16.101.1.1.14.2.1.1
Parameter Type = Internal. The first two bytes of this index are a partition ID with a range of 1 to 1023. There can be at most 32 partitions for a single node, and each partition must already have a corresponding node access table entry defined. The last two bytes are an entry ID with a range of 1 to 5. For each partition, up to 5 entries may be defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RecordIndex  

scCmntyMib2SystemAccess 1.3.6.1.4.1.16.101.1.1.14.2.1.2
Parameter Type = Immediate. Defines access rights for a community entry to the MIB-II system group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyMib2InterfacesAccess 1.3.6.1.4.1.16.101.1.1.14.2.1.3
Parameter Type = Immediate. Defines access rights for a community entry to the MIB-II interfaces group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyMib2AtAccess 1.3.6.1.4.1.16.101.1.1.14.2.1.4
Parameter Type = Immediate. Defines access rights for a community entry to the MIB-II at group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyMib2IpAccess 1.3.6.1.4.1.16.101.1.1.14.2.1.5
Parameter Type = Immediate. Defines access rights for a community entry to the MIB-II ip group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyMib2IcmpAccess 1.3.6.1.4.1.16.101.1.1.14.2.1.6
Parameter Type = Immediate. Defines access rights for a community entry to the MIB-II icmp group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyMib2UdpAccess 1.3.6.1.4.1.16.101.1.1.14.2.1.7
Parameter Type = Immediate. Defines access rights for a community entry to the MIB-II udp group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyMib2SnmpAccess 1.3.6.1.4.1.16.101.1.1.14.2.1.8
Parameter Type = Immediate. Defines access rights for a community entry to the MIB-II snmp group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecTable 1.3.6.1.4.1.16.101.1.1.14.3
Represents which groups in the security MIB this community has access to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScCmntySecEntry

scCmntySecEntry 1.3.6.1.4.1.16.101.1.1.14.3.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScCmntySecEntry  

scCmntySecIndex 1.3.6.1.4.1.16.101.1.1.14.3.1.1
Parameter Type = Internal. Format is: partition ID (1-1023):entry ID (1-5). Only 32 partitions can be entered, each with 5 entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RecordIndex  

scCmntySecPartHeaderAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.2
Parameter Type = Immediate. Specifies access to scPartitionHeader - the security MIB partition header.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecSystemProfileAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.3
Parameter Type = Immediate. Specifies access to scSystemProfile - the security MIB system prof. section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecRootAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.4
Parameter Type = Immediate. Specifies access to scRootAccessTable - the security MIB root access section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecNodeAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.5
Parameter Type = Immediate. Specifies access to scNodeAccessTable - the security MIB node access section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecTrapAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.6
Parameter Type = Immediate. Specifies access to scTrapAccessTable - the security MIB trap access section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecChanProfileAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.7
Parameter Type = Immediate. Specifies access to scChProfileTable - the security MIB channel prof. section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecSoftloadAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.8
Parameter Type = Immediate. Specifies access to scSoftloadEntry - the security MIB softload section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecCPIAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.9
Parameter Type = Immediate. Specifies access to scCpiAccess - the security MIB CPI access section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecModemAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.10
Parameter Type = Immediate. Specifies access to scModemAccess - the security MIB modem access section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecIPAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.11
Parameter Type = Immediate. Specifies access to scIpAccess - the security MIB IP access section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecLGMRoutingAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.12
Parameter Type = Immediate. Specifies access to scLgmStaticRouteTable - the security MIB LGM static routing table section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecVoiceProfileAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.13
Parameter Type = Immediate. Specifies access to scVoicePrf - the security MIB voice profile section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntySecCommunityAccess 1.3.6.1.4.1.16.101.1.1.14.3.1.14
Parameter Type = Immediate. Specifies access to scCmntyAccess - the security MIB community section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfTable 1.3.6.1.4.1.16.101.1.1.14.4
Represents which groups in the resource configuration MIB this community has access to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScCmntyRecfEntry

scCmntyRecfEntry 1.3.6.1.4.1.16.101.1.1.14.4.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScCmntyRecfEntry  

scCmntyRecfIndex 1.3.6.1.4.1.16.101.1.1.14.4.1.1
Parameter Type = Internal. Format is: partition ID (1-1023):entry ID (1-5). Only 32 partitions can be entered, each with 5 entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RecordIndex  

scCmntyRecfPartHeader 1.3.6.1.4.1.16.101.1.1.14.4.1.2
Parameter Type = Immediate. Specifies access to recfPartitionHeader - the resource MIB partition header section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfNodeAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.3
Parameter Type = Immediate. Specifies access to recfNode - the resource configuration MIB node section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfNestAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.4
Parameter Type = Immediate. Specifies access to recfNest - the resource configuration MIB nest section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfSlotAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.5
Parameter Type = Immediate. Specifies access to recfSlot - the resource configuration MIB slot section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfModuleAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.6
Parameter Type = Immediate. Specifies access to recfModule - the resource configuration MIB generic module section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfPortAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.7
Parameter Type = Immediate. Specifies access to recfPort - the resource configuration MIB generic port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfBundleAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.8
Parameter Type = Immediate. Specifies access to recfBundle - the resource configuration MIB bundle section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfINLAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.9
Parameter Type = Immediate. Specifies access to recfINL - the resource configuration MIB INL section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfTDMChannelAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.10
Parameter Type = Immediate. Specifies access to recfTDMChannel - the resource configuration MIB TDM channel section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfFrRelayAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.11
Parameter Type = Immediate. Specifies access to recfFrame - the resource configuration MIB frame relay section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfAd10PortAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.12
Parameter Type = Immediate. Specifies access to recfAd10Port - the resource configuration MIB AD10 port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfAsmPortAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.13
Parameter Type = Immediate. Specifies access to recfAsmPort - the resource configuration MIB ASM port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfRtmPortAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.14
Parameter Type = Immediate. Specifies access to recfRtmPort - the resource configuration MIB RTM port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfLgmPortAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.15
Parameter Type = Immediate. Specifies access to recfLgmPort - the resource configuration MIB LGM port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfDsmPortAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.16
Parameter Type = Immediate. Specifies access to recfDsmPort - the resource configuration MIB DSM port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfTranslationAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.17
Parameter Type = Immediate. Specifies access to recfTranslation - the resource configuration MIB translation section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRecfHwRscAccess 1.3.6.1.4.1.16.101.1.1.14.4.1.18
Parameter Type = Immediate. INTRODUCED 2.0.1 Defines access rights for a community entry to the resource configuration hardware resource section (recfHwRsc).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestTable 1.3.6.1.4.1.16.101.1.1.14.5
Represents which groups in the resource status MIB this community has access to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScCmntyRestEntry

scCmntyRestEntry 1.3.6.1.4.1.16.101.1.1.14.5.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScCmntyRestEntry  

scCmntyRestIndex 1.3.6.1.4.1.16.101.1.1.14.5.1.1
Parameter Type = Internal. Format is: partition ID (1-1023):entry ID (1-5). Only 32 partitions can be entered, each with 5 entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RecordIndex  

scCmntyRestNodeAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.2
Parameter Type = Immediate. Specifies access to restNode - the resource status MIB node section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestNestAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.3
Parameter Type = Immediate. Specifies access to restNest - the resource status MIB nest section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestSlotAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.4
Parameter Type = Immediate. Specifies access to restSlot - the resource status MIB slot section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestModuleAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.5
Parameter Type = Immediate. Specifies access to restModule - the resource status MIB module section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestPortAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.6
Parameter Type = Immediate. Specifies access to restPort - the resource status MIB port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestBundleAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.7
Parameter Type = Immediate. Specifies access to restBundle - the resource status MIB bundle section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestINLAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.8
Parameter Type = Immediate. Specifies access to restINL - the resource status MIB INL section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestINLContentsAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.9
Parameter Type = Immediate. Specifies access to restINLContentsTable - the resource status MIB INL contents section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestChannelAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.10
Parameter Type = Immediate. Specifies access to restChannel - the resource status MIB channel section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestAd10PortAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.11
Parameter Type = Immediate. Specifies access to restAd10Port - the resource status MIB AD10 port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestAsmPortAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.12
Parameter Type = Immediate. Specifies access to restAsmPort - the resource status MIB ASM port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestTrkGrpAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.13
Parameter Type = Immediate. Specifies access to restTrunkGroup - the resource status MIB trunk group section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestRtmPortAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.14
Parameter Type = Immediate. Specifies access to restRtmPort - the resource status MIB RTM port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestLgmPortAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.15
Parameter Type = Immediate. Specifies access to restLgmPort - the resource status MIB LGM port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestSafAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.16
Parameter Type = Immediate. Specifies access to restSaf - the resource status MIB SAF section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestDsmPortAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.17
Parameter Type = Immediate. Specifies access to restDsmPort - the resource status MIB DSM port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestHwRscAccess 1.3.6.1.4.1.16.101.1.1.14.5.1.18
Parameter Type = Immediate. INTRODUCED 2.0.1 Defines access rights for a community entry to the resource status hardware resource section (restHwRsc).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestStTable 1.3.6.1.4.1.16.101.1.1.14.6
Represents which groups in the resource statistics MIB this community has access to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScCmntyRestStEntry

scCmntyRestStEntry 1.3.6.1.4.1.16.101.1.1.14.6.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScCmntyRestStEntry  

scCmntyRestStIndex 1.3.6.1.4.1.16.101.1.1.14.6.1.1
Parameter Type = Internal. Format is: partition ID (1-1023):entry ID (1-5). Only 32 partitions can be entered, each with 5 entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RecordIndex  

scCmntyRestStModuleAccess 1.3.6.1.4.1.16.101.1.1.14.6.1.2
Parameter Type = Immediate. Specifies access to restStatModule - the resource statistics MIB module section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestStPortAccess 1.3.6.1.4.1.16.101.1.1.14.6.1.3
Parameter Type = Immediate. Specifies access to restStatPort - the resource statistics MIB port section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestStINLAccess 1.3.6.1.4.1.16.101.1.1.14.6.1.4
Parameter Type = Immediate. Specifies access to restStatInl - the resource statistics MIB INL section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestStChannelAccess 1.3.6.1.4.1.16.101.1.1.14.6.1.5
Parameter Type = Immediate. Specifies access to restStatCh - the resource statistics MIB channel section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyRestStAd10Access 1.3.6.1.4.1.16.101.1.1.14.6.1.6
Parameter Type = Immediate. Specifies access to restStatAd10 - the resource statistics MIB AD-10 section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyAlmTable 1.3.6.1.4.1.16.101.1.1.14.7
Represents which groups in the alarm MIB this community has access to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScCmntyAlmEntry

scCmntyAlmEntry 1.3.6.1.4.1.16.101.1.1.14.7.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ScCmntyAlmEntry  

scCmntyAlmIndex 1.3.6.1.4.1.16.101.1.1.14.7.1.1
Parameter Type = Internal. Format is: partition ID (1-1023):entry ID (1-5). Only 32 partitions can be entered, each with 5 entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RecordIndex  

scCmntyAlmPartHeader 1.3.6.1.4.1.16.101.1.1.14.7.1.2
Parameter Type = Immediate. Specifies access to alPartitionHeader - the alarm MIB partition header section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyAlmAlarmProfileAccess 1.3.6.1.4.1.16.101.1.1.14.7.1.3
Parameter Type = Immediate. Specifies access to alSystemProfile - the alarm MIB alarm profile section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyAlmAlarmLogAccess 1.3.6.1.4.1.16.101.1.1.14.7.1.4
Parameter Type = Immediate. Specifies access to alLog - the alarm MIB alarm log section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyAlmAlarmRecordAccess 1.3.6.1.4.1.16.101.1.1.14.7.1.5
Parameter Type = Immediate. Specifies access to alLogRecord - the alarm MIB alarm record section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

scCmntyAlmTrapAccess 1.3.6.1.4.1.16.101.1.1.14.7.1.6
Parameter Type = Immediate. Specifies access to alTrapContents - the alarm MIB trap section.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAccess(1), readOnly(2), readWrite(3)  

recfPartitionHeader 1.3.6.1.4.1.16.101.1.2.1.1
OBJECT IDENTIFIER    

recfPartitionControl 1.3.6.1.4.1.16.101.1.2.1.1.1
Parameter Type = Immediate.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER validateCRC(1), invalidateCRC(2)  

recfPartitionCRCCheck 1.3.6.1.4.1.16.101.1.2.1.1.2
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER succeed(1), fail(2)  

recfPartitionFlushMode 1.3.6.1.4.1.16.101.1.2.1.1.3
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfNode 1.3.6.1.4.1.16.101.1.2.1.2
OBJECT IDENTIFIER    

recfNodeEntry 1.3.6.1.4.1.16.101.1.2.1.2.1
OBJECT IDENTIFIER    

recfNodeUpdate 1.3.6.1.4.1.16.101.1.2.1.2.1.1
Parameter Type = Internal. If set to updateNestReq, need to execute restNodeDiagnostics(updateNest) to load.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateNestReq(3)  

recfNodeDescr 1.3.6.1.4.1.16.101.1.2.1.2.1.2
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

recfNodeContact 1.3.6.1.4.1.16.101.1.2.1.2.1.3
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

recfNodeName 1.3.6.1.4.1.16.101.1.2.1.2.1.4
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

recfNodeLocation 1.3.6.1.4.1.16.101.1.2.1.2.1.5
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

recfNodeNumberOfNest 1.3.6.1.4.1.16.101.1.2.1.2.1.6
Parameter Type = Intrusive. New number of nests will not operate until restNodeDiagnostics(updateNest).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

recfNodeClockSwitch 1.3.6.1.4.1.16.101.1.2.1.2.1.7
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), fast(2)  

recfNodeAlarmRelay 1.3.6.1.4.1.16.101.1.2.1.2.1.8
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enableAlarmRelay(19), disableAlarmRelay(20)  

recfClockTable 1.3.6.1.4.1.16.101.1.2.1.2.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfClockEntry

recfClockEntry 1.3.6.1.4.1.16.101.1.2.1.2.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfClockEntry  

recfClockIndex 1.3.6.1.4.1.16.101.1.2.1.2.2.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

recfClockStartMode 1.3.6.1.4.1.16.101.1.2.1.2.2.1.2
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(44), erase(3)  

recfClockUpdate 1.3.6.1.4.1.16.101.1.2.1.2.2.1.3
Parameter Type = Internal. If set to updateReq, need to execute restNodeDiagnostics(updateClockTable) to load.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateReq(2)  

recfClockType 1.3.6.1.4.1.16.101.1.2.1.2.2.1.4
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), station1(2), station2(3), portRxInd(4), portRxDep(5), portTx(6)  

recfClockStationSpeed 1.3.6.1.4.1.16.101.1.2.1.2.2.1.5
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER s2400(1), s3200(2), s3600(3), s4000(4), s4800(5), s5600(6), s6000(7), s6400(8), s7200(9), s8000(10), s8400(11), s9600(12), s12000(13), s14400(14), s16000(15), s19200(16), s24000(17), s28800(18), s32000(19), s38400(20), s40800(21), s48000(22), s50000(23), s56000(24), s57600(25), s64000(26), s72000(27), s76800(28), s80000(29), s96000(30), s112000(31), s128000(32), s144000(33), s153600(34), s168000(35), s192000(36), s224000(37), s230400(38), s256000(39), s384000(40), s448000(41), s460800(42), s512000(43), s576000(44), s672000(45), s768000(46), s896000(47), s1024000(48), s1152000(49), s1334400(50), s1536000(51), s1544000(52), s1920000(53), s1984000(54), s2048000(55), s1856000(56), s1792000(57), s1728000(58), s1664000(59), s1600000(60), s1472000(61), s1408000(62), s1288000(63), s1280000(64), s1232000(65), s1216000(66), s1176000(67), s1120000(68), s1088000(69), s1064000(70), s1008000(71), s960000(72), s952000(73), s840000(74), s832000(75), s784000(76), s728000(77), s704000(78), s640000(79), s616000(80), s560000(81), s504000(82), s392000(83), s336000(84), s320000(85), s280000(86)  

recfClockPortSource 1.3.6.1.4.1.16.101.1.2.1.2.2.1.6
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortAddr  

recfClockQuality 1.3.6.1.4.1.16.101.1.2.1.2.2.1.7
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER high(1), low(2)  

recfClockPriority 1.3.6.1.4.1.16.101.1.2.1.2.2.1.8
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

recfAvailResourceTable 1.3.6.1.4.1.16.101.1.2.1.2.3
This MIB section serves the purpose of finding an available resource of the type specified by the instance identifier. The values of the instance identifier are enumerated in the recfAvailResourceIndex attribute. This MIB section returns the address of the resource of the specified type, that is available at the request time. If multiple resources of that type are available, the order of their return is not defined.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfAvailResourceEntry

recfAvailResourceEntry 1.3.6.1.4.1.16.101.1.2.1.2.3.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfAvailResourceEntry  

recfAvailResourceType 1.3.6.1.4.1.16.101.1.2.1.2.3.1.1
Parameter Type = Internal. Specifies the ST resource type to search. The possible values are: - link2TranslationIndex - find an available entry in recfLink2TraTable MIB section.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER link2TranslationIndex(1)  

recfAvailResourceId 1.3.6.1.4.1.16.101.1.2.1.2.3.1.2
Parameter Type = Internal. The return value specifies an available ST resource address in the format used to access the MIB section of the specified type. If there are no available resources, then all bytes of the returned identifier will be equal to zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..6)  

recfNestTable 1.3.6.1.4.1.16.101.1.2.1.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfNestEntry

recfNestEntry 1.3.6.1.4.1.16.101.1.2.1.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfNestEntry  

recfNestAddr 1.3.6.1.4.1.16.101.1.2.1.3.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NestAddr  

recfNestDesc 1.3.6.1.4.1.16.101.1.2.1.3.1.2
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

recfSlotTable 1.3.6.1.4.1.16.101.1.2.1.4
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfSlotEntry

recfSlotEntry 1.3.6.1.4.1.16.101.1.2.1.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfSlotEntry  

recfSlotAddr 1.3.6.1.4.1.16.101.1.2.1.4.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

recfSlotModuleStartMode 1.3.6.1.4.1.16.101.1.2.1.4.1.2
Parameter Type = Intrusive. Setting to erase will fail if any of the following conditions are true: (1) The module's redundant mode is set to one-to-one redundancy. (2) The module has any unremoved INLs. (3) The module has any channels that are not disconnected. (4) There is hardware present in the slot, and the module is in an active or standby state, or is going into an active or standby state (i.e., is initializing or loading). Otherwise, the erase command will erase the module configuration and all of the ports, bundles, INLs, and channels on the module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfSlotUpdate 1.3.6.1.4.1.16.101.1.2.1.4.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateReq(2), resetReq(3)  

recfSlotModuleDesc 1.3.6.1.4.1.16.101.1.2.1.4.1.4
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..62)  

recfSlotModuleType 1.3.6.1.4.1.16.101.1.2.1.4.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ncp(1), lxm(3), rxm(4), t1m(5), e1m(6), sgm(7), lgm(8), asm(9), fsm(11), sdm(12), rtm(14), dsm(19), e3m(20)  

recfSlotModuleSubType 1.3.6.1.4.1.16.101.1.2.1.4.1.6
Parameter Type = Intrusive. For NCP modules: NCP-1 value is 1 NCP-2 value is 2 NCP-3 value is 3 For FSM modules: FSM-16 value is 1 FSM-64 value is 2 For T1M modules: T1M-4/DS1 value is 1 T1M-4/DSX-1 value is 2 T1M-2/DS1 value is 3 T1M-2/DSX-1 value is 4 For E1M modules: E1M-4/Ubal value is 1 E1M-4/Bal value is 2 E1M-2/Ubal value is 3 E1M-2/Bal value is 4 For SDM modules: SDM-8/V.35 value is 1 SDM-8/V.11 value is 2 SDM-8/V.24 value is 3 SDM-8E/V.35 value is 5 SDM-8E/V.11 value is 6 SDM-4R/V.35 value is 7 SDM-4R/V.11 value is 8 SDM-4R/E1-Bal value is 33 SDM-4R/E1-Ubal value is 34 SDM-4/64K-Co value is 40 SDM-4R value is 42 For SGM modules: SGM-1 value is 1 SGM-1/128K value is 3 SGM-1/19.2K value is 4 For ASM modules: ASM-16 value is 1 ASM-16A value is 2 ASM-16C value is 3 For LGM modules: LGM-2 value is 1 For DSM modules: DSM-1 value is 1 For E3M modules: E3M-1 value is 1 E3M-2 value is 2 Modules types not listed support only hardware subtype value 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfSlotRedundantMode 1.3.6.1.4.1.16.101.1.2.1.4.1.7
Parameter Type = Intrusive. Server modules will always have group redundancy regardless of the value of this field. Default value is none for I/O modules and group for server modules.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), oneToOne(2), group(3)  

recfSlotGroupID 1.3.6.1.4.1.16.101.1.2.1.4.1.8
Parameter Type = Intrusive. Applies to server modules only for group redundancy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..64  

recfSlotModuleMaxBypass 1.3.6.1.4.1.16.101.1.2.1.4.1.9
Parameter Type = Non-intrusive. FSM or DSM module bypassing capability in terms of percentage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

recfSlotModuleMaxSource 1.3.6.1.4.1.16.101.1.2.1.4.1.10
Parameter Type = Non-intrusive. FSM module termination capability in terms of percentage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

recfSlotModuleStartDiagMask 1.3.6.1.4.1.16.101.1.2.1.4.1.11
Parameter Type = Intrusive. This mask allows a module to be online or standby even though some items as marked by the mask have failed startup diagnostics. For all tests, a bit set (1) means the module will not operate if the corresponding hardware is not working. For all test descriptions, bit 1 refers to the least significant bit of the lowest byte in the octet string. Startup diagnostics mask for the NCP (additional tests for the NCP are defined in recfSlotModuleStartDiagMaskExt): NCP will ignore bits 1,3,4,7,8,10-15,25-31. Bit 24 is no longer used as of 2.0.1. bit 1 ID PROM bit 2 LAN RAM bit 3 Mailbox RAM bit 4 Frame RAM bit 5 CPI port bit 6 Modem port bit 7 ABPI bit 8 unexpected interrupt bit 9 Ethernet chip bit 10 DBPI bit 11 PARB bit 12 Security MIB database bit 13 Resource MIB database bit 14 Alarm MIB database bit 15 Database version bit 16 T1M RTS (only on-line NCP) bit 17 E1M RTS (only on-line NCP) bit 18 FSM RTS (only on-line NCP) bit 19 MIB schema (only on-line NCP) bit 20 SDM RTS (only on-line NCP) bit 21 SGM RTS (only on-line NCP) bit 22 ASM RTS (only on-line NCP) bit 23 RTM RTS (only on-line NCP) bit 24 Utility (only on-line NCP) bit 25 Boot PROM bit 26 Flash PROM map bit 27 NCP image bit 28 Ticker bit 29 DRAM bit 30 reserved bit 31 Clock bit 32 reserved Startup diagnostics mask for the SDM: bit 1 Register access bit 2 Ticker bit 3-32 reserved Startup diagnostics mask for the FSM: bit 1-24 reserved bit 25 INL test bit 26 Ticker bit 27-32 reserved Startup diagnostics mask for the DSM: bit 1-24 reserved bit 25 INL test bit 26 Ticker bit 27-32 reserved Startup diagnostics mask for the SGM: bit 1 RAM 1 time slot sync drop bit 2 RAM 1 time slot sync add bit 3 RAM 2 time slot sync drop bit 4 RAM 2 time slot sync add bit 5 SGM frame RAM bank 0 bit 6 SGM frame RAM bank 1 bit 7 AGM frame RAM bank 0 bit 8 AGM frame RAM bank 1 bit 9 Pointer control RAM bit 10 Function RAM bit 11-16 reserved bit 17 Phasor bit 18-24 reserved bit 25 FIFO bit 26-32 reserved Startup diagnostics mask for the RTM: bit 1 RTM DSP RAM bit 2 RTM SCC Chip bit 3-32 reserved Startup diagnostics mask for the LGM: bit 1 SIM load bit 2 SOM load bit 3 SAM load bit 4 scanner load bit 5 DSP load bit 6-32 reserved There are no startup diagnostics mask for the T1M and E1M. The default is to ignore all tests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

recfSlotModuleBgdDiagMask 1.3.6.1.4.1.16.101.1.2.1.4.1.12
Parameter Type = Non-intrusive. This mask allows a module to be online or standby even though some items as marked by the mask have failed background diagnostics. For all tests, a bit set (1) means the module will not operate if the corresponding hardware is not working. For all test descriptions, bit 1 refers to the least significant bit of the lowest byte in the octet string. Background diagnostics mask for the NCP: (additional tests for the NCP are defined in recfSlotModuleBgdDiagMaskExt): NCP will ignore bits 1,28,30. These tests will always cause hard errors if they fail. bit 1 ID PROM bit 2-11 reserved bit 12 Security MIB database bit 13 Resource MIB database bit 14 Alarm MIB database bit 15 Database version number bit 16 T1M RTS bit 17 E1M RTS bit 18 FSM RTS bit 19 MIB schema bit 20 SDM RTS bit 21 SGM RTS bit 22 ASM RTS bit 23 RTM RTS bit 24 Utility bit 25 Boot PROM bit 26 Flash PROM map bit 27 NCP image bit 28 Bus frame bit 29 reserved bit 30 PLL bit 31 reserved bit 32 Code guard Background diagnostics mask for the FSM: bit 1 reserved bit 2 Buffer pool bit 3-32 reserved Background diagnostics mask for the DSM: bit 1 reserved bit 2 Buffer pool bit 3-32 reserved There are no background diagnostics for the T1M, E1M, SDM, SGM, RTM, and LGM. The default is to ignore all tests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

recfSlotModulePortDiagMask 1.3.6.1.4.1.16.101.1.2.1.4.1.13
Parameter Type = Non-intrusive. This mask allows a module to be online or standby even though some items as marked by the mask have failed port startup diagnostics. For all tests, a bit set (1) means the module will not operate if the corresponding hardware is not working. Each byte indicates the diagnostic mask of a port. For T1M and E1M ports: bit 1 (lsb of each byte) Register access bit 2 Loopback bit 3 HDLC bit 4-8 reserved For FSM ports: bit 1 (lsb of each byte) HDLC bit 2-8 reserved For DSM ports: bit 1 (lsb of each byte) HDLC bit 2-8 reserved For RTM ports: bit 1 (lsb of each byte) Loopback bit 2-8 reserved There are no port diagnostics for NCP, SDM, and SGM. The default is to ignore all tests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(64)  

recfSlotModuleDiagoseMode 1.3.6.1.4.1.16.101.1.2.1.4.1.14
Parameter Type = Non-intrusive. INTRODUCED 2.0.1 This parameter is used to control module-specific code for diagnosing problems. The interpretation of values for this field is determined by the specific type of module in the slot. The value zero (0) will mean normal operation for all module types.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

recfSlotModuleStartDiagMaskExt 1.3.6.1.4.1.16.101.1.2.1.4.1.15
Parameter Type = Intrusive. INTRODUCED 2.0.1 This mask allows a module to be online or standby even though some items as marked by the mask have failed startup diagnostics. For all tests, a bit set (1) means the module will not operate if the corresponding hardware is not working. For all test descriptions, bit 1 refers to the least significant bit of the lowest byte in the octet string. Startup diagnostics mask for the NCP (this is a continuation of the tests defined for the NCP in recfSlotModuleStartDiagMask): bit 1 DSM RTS bit 2 LGM RTS bit 3 E3M RTS bit 4-32 reserved. Currently, this attribute is not used for any other module type except the NCP (that is, all bits are reserved for the other module types).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

recfSlotModuleBgdDiagMaskExt 1.3.6.1.4.1.16.101.1.2.1.4.1.16
Parameter Type = Non-intrusive. INTRODUCED 2.0.1 This mask allows a module to be online or standby even though some items as marked by the mask have failed background diagnostics. For all tests, a bit set (1) means the module will not operate if the corresponding hardware is not working. For all test descriptions, bit 1 refers to the least significant bit of the lowest byte in the octet string. Background diagnostics mask for the NCP (this is a continuation of the tests defined for the NCP in recfSlotModuleBgdDiagMask): bit 1 DSM RTS bit 2 LGM RTS bit 3 E3M RTS bit 4-32 reserved. Currently, this attribute is not used for any other module type except the NCP (that is, all bits are reserved for the other module types).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

recfModule 1.3.6.1.4.1.16.101.1.2.1.5
OBJECT IDENTIFIER    

recfModuleFsm16Table 1.3.6.1.4.1.16.101.1.2.1.5.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfModuleFsm16Entry

recfModuleFsm16Entry 1.3.6.1.4.1.16.101.1.2.1.5.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfModuleFsm16Entry  

recfModuleFsm16Addr 1.3.6.1.4.1.16.101.1.2.1.5.1.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

recfModuleFsm16Partition 1.3.6.1.4.1.16.101.1.2.1.5.1.1.2
Parameter Type = Non-intrusive. Each two bytes is the partition ID of a physical port on the module. Partition 1 is for CNMS. Partition 0xFFFE (65534) is for any partition. When this is changed, it will not change the current port allocation, but it will affect any new server ports being allocated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

recfModuleFsm64Table 1.3.6.1.4.1.16.101.1.2.1.5.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfModuleFsm64Entry

recfModuleFsm64Entry 1.3.6.1.4.1.16.101.1.2.1.5.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfModuleFsm64Entry  

recfModuleFsm64Addr 1.3.6.1.4.1.16.101.1.2.1.5.2.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

recfModuleFsm64Partition 1.3.6.1.4.1.16.101.1.2.1.5.2.1.2
Parameter Type = Non-intrusive. Each two bytes is the partition ID of a physical port on the module. Partition 1 is for CNMS. Partition 0xFFFE (65534) is for any partition. When this is changed, it will not change the current port allocation, but it will affect any new server ports being allocated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(128)  

recfModuleSgmAgTable 1.3.6.1.4.1.16.101.1.2.1.5.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfModuleSgmAgEntry

recfModuleSgmAgEntry 1.3.6.1.4.1.16.101.1.2.1.5.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfModuleSgmAgEntry  

recfModuleSgmAgAddr 1.3.6.1.4.1.16.101.1.2.1.5.3.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

recfModuleSgmAgPartition 1.3.6.1.4.1.16.101.1.2.1.5.3.1.2
Parameter Type = Non-intrusive. Each two bytes is the partition ID of a physical port on the module. Partition 1 is for CNMS. Partition 0xFFFE (65534) is for any partition. When this is changed, it will not change the current port allocation, but it will affect any new server ports being allocated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(64)  

recfModuleAsmTable 1.3.6.1.4.1.16.101.1.2.1.5.4
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfModuleAsmEntry

recfModuleAsmEntry 1.3.6.1.4.1.16.101.1.2.1.5.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfModuleAsmEntry  

recfModuleAsmAddr 1.3.6.1.4.1.16.101.1.2.1.5.4.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

recfModuleAsmPartition 1.3.6.1.4.1.16.101.1.2.1.5.4.1.2
Parameter Type = Non-intrusive. Each two bytes is the partition ID of a physical engine on the module. Partition 1 is for CNMS. Partition 0xFFFE (65534) is for any partition. When this is changed, it will not change the current port allocation, but it will affect any new server ports being allocated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

recfModuleAsmCelpPartition 1.3.6.1.4.1.16.101.1.2.1.5.4.1.3
Parameter Type = Non-intrusive. Each two bytes is the partition ID of a CELP license on the module. Partition 1 is for CNMS. Partition 0xFFFE (65534) is for any partition. When this is changed, it will not change the current port allocation, but it will affect any new server ports being allocated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

recfModuleAsmMinCelpPorts 1.3.6.1.4.1.16.101.1.2.1.5.4.1.4
Parameter Type = Non-intrusive. Defines the number of the ASM ports that cannot be used for anything else but CELP application.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

recfModuleAsmApplType 1.3.6.1.4.1.16.101.1.2.1.5.4.1.5
Parameter Type = Intrusive. Allows the user to specify a specific application type to be allocated to this ASM module. Ports with other application types will not be able to be allocated on this module. If the subtype of this particular ASM module does not support the application type specified here, then the module will still come up, but no ports will be able to be allocated. If this occurs, then the restAsmModApplTable section of the MIB will indicate that no applications are available. If a setting of mixed is specified, then allocation of a port with a particular application will only be restricited by the subtype of the module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x50(1), celp-atc(2), adpcm(3), mixed(255)  

recfModuleLgmTable 1.3.6.1.4.1.16.101.1.2.1.5.5
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfModuleLgmEntry

recfModuleLgmEntry 1.3.6.1.4.1.16.101.1.2.1.5.5.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfModuleLgmEntry  

recfModuleLgmAddr 1.3.6.1.4.1.16.101.1.2.1.5.5.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

recfModuleLgmPartition 1.3.6.1.4.1.16.101.1.2.1.5.5.1.2
Parameter Type = Non-intrusive. Each two bytes is the partition ID of a VILC aggregate on the module. Partition 1 is for CNMS. Partition 0xFFFE (65534) is for any partition. When this is changed, it will not change the current VILC allocation, but it will affect any new server ports being allocated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

recfModuleDsm 1.3.6.1.4.1.16.101.1.2.1.5.6
OBJECT IDENTIFIER    

recfModuleDsmTable 1.3.6.1.4.1.16.101.1.2.1.5.6.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfModuleDsmEntry

recfModuleDsmEntry 1.3.6.1.4.1.16.101.1.2.1.5.6.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfModuleDsmEntry  

recfModuleDsmAddr 1.3.6.1.4.1.16.101.1.2.1.5.6.1.1.1
Parameter Type = Internal. DSM module address. Format is nest.slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

recfModuleDsmPartitionMap 1.3.6.1.4.1.16.101.1.2.1.5.6.1.1.2
Parameter Type = Non-intrusive. Every octet pair is the partition ID of a physical port on the module. Partition 1 is for CNMS. Partition 0xFFFE (65534) is for any partition. When this is changed, it will not change the current port allocation, but it will affect any new server ports being allocated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(128)  

recfModuleDsmPbxProtocol 1.3.6.1.4.1.16.101.1.2.1.5.6.1.1.3
Parameter Type = Intrusive. All D-channels connected to this DSM module will need to be set up with the same PBX protocol as set here. Changes to this field will be reflected in recfSlotUpdate. A module reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dpnss(1), qsig(2)  

recfModuleDsmActiveLev1CDRMode 1.3.6.1.4.1.16.101.1.2.1.5.6.1.1.4
Parameter Type = Non-intrusive. Specifies whether level 1 Call Detail Record for the calls in progress are to be generated by the DSM. This parameter affects all the D-channels terminated on this module. Changes to this field will be reflected in recfSlotUpdate. A module update will be required in order for the change to take effect. It will not disrupt any channel connections associated with DSM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfModuleDsmRecordLev1CDRMode 1.3.6.1.4.1.16.101.1.2.1.5.6.1.1.5
Parameter Type = Non-intrusive. Specifies whether level 1 Call Detail Record for the completed calls are to be generated by the DSM. This parameter affects all the D-channels terminated on this module. Changes to this field will be reflected in recfSlotUpdate. A module update will be required in order for the change to take effect. It will not disrupt any channel connections associated with DSM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfModuleDsmActiveLev2CDRMode 1.3.6.1.4.1.16.101.1.2.1.5.6.1.1.6
Parameter Type = Non-intrusive. Specifies whether level 2 Call Detail Record for the calls in progress are to be generated by the DSM. This parameter affects all the D-channels terminated on this module. Changes to this field will be reflected in recfSlotUpdate. A module update will be required in order for the change to take effect. It will not disrupt any channel connections associated with DSM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfModuleDsmRecordLev2CDRMode 1.3.6.1.4.1.16.101.1.2.1.5.6.1.1.7
Parameter Type = Non-intrusive. Specifies whether level 2 Call Detail Record for the completed calls are to be generated by the DSM. This parameter affects all the D-channels terminated on this module. Changes to this field will be reflected in recfSlotUpdate. A module update will be required in order for the change to take effect. It will not disrupt any channel connections associated with DSM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfModDsmRecCDRLogTable 1.3.6.1.4.1.16.101.1.2.1.5.6.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfModDsmRecCDRLogEntry

recfModDsmRecCDRLogEntry 1.3.6.1.4.1.16.101.1.2.1.5.6.2.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfModDsmRecCDRLogEntry  

recfModDsmRecCDRLogAddr 1.3.6.1.4.1.16.101.1.2.1.5.6.2.1.1
Parameter Type = Internal. Address of this DSM module. Format is nest.slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

recfModDsmRecCDRLogIndex 1.3.6.1.4.1.16.101.1.2.1.5.6.2.1.2
Parameter Type = Internal. Specifies the CDR log to access.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

recfModDsmRecCDRLogControlMode 1.3.6.1.4.1.16.101.1.2.1.5.6.2.1.3
Parameter Type = Non-intrusive. Changes will not affect channels that are already connected. Disable will prevent new CDRs to be recorded in this log. Erase will remove this CDR log. Changes to this field will be reflected in recfSlotUpdate. A module update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this DSM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

recfModDsmRecCDRLogSize 1.3.6.1.4.1.16.101.1.2.1.5.6.2.1.4
Parameter Type = Non-intrusive. Assigns the maximum number of CDRs that may be stored in this CDR log. The total size of all CDR logs on this module cannot exceed the number of total records available. This number may be obtain from the restDsmModuleTotalRecCDRs attribute. When a new DSM module is configured, CDR log #1 will automatically be created with a size of 1000 CDRs. Any other CDR logs that are configured after this will have a default size of 0. Changes to this field will be reflected in recfSlotUpdate. A module update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this DSM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

recfModDsmRecCDRLogOvThrshld 1.3.6.1.4.1.16.101.1.2.1.5.6.2.1.5
Parameter Type = Non-intrusive. Defines an overflow threshold on this CDR log. When reached, the threshold flag is set, and the threshold exceeded alarm is issued. If this value exceeds the value of the recfModDsmRecCDRLogSize attribute, then the threshold exceeded alarm will never be generated for this CDR log. When a new DSM module is configured, CDR log #1 will automatically be created with a threshold of 900 CDRs. Any other CDR logs that are configured after this will have a default threshold of 0. Changes to this field will be reflected in recfSlotUpdate. A module update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this DSM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

recfModDsmRecCDRLogPartitionID 1.3.6.1.4.1.16.101.1.2.1.5.6.2.1.6
Parameter Type = Non-intrusive. Specifies partition ID of this CDR log. Changes to this field will be reflected in recfSlotUpdate. A module update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this DSM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfPort 1.3.6.1.4.1.16.101.1.2.1.6
OBJECT IDENTIFIER    

recfT1mPortTable 1.3.6.1.4.1.16.101.1.2.1.6.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfT1mPortEntry

recfT1mPortEntry 1.3.6.1.4.1.16.101.1.2.1.6.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfT1mPortEntry  

recfT1mPortAddr 1.3.6.1.4.1.16.101.1.2.1.6.1.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfT1mPortStartMode 1.3.6.1.4.1.16.101.1.2.1.6.1.1.2
Parameter Type = Intrusive. Setting to erase will fail if the port has any unremoved INLs or channels that are not disconnected. Otherwise, it will return the port's configuration to its default values, and erase any bundles, INLs, and channels on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfT1mPortUpdate 1.3.6.1.4.1.16.101.1.2.1.6.1.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateReq(2), resetReq(3)  

recfT1mPortFraming 1.3.6.1.4.1.16.101.1.2.1.6.1.1.4
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sf(1), attESF(2), ansiESF(3)  

recfT1mPortLineCodeType 1.3.6.1.4.1.16.101.1.2.1.6.1.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2), zeroCodeSuppression(3)  

recfT1mPortDs1Option 1.3.6.1.4.1.16.101.1.2.1.6.1.1.6
Parameter Type = Intrusive. This field refers to the line build out of the T1M port. The values should be interpreted as follows: a: 0 dB b: -7.5 dB c: -15 dB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a(1), b(2), c(3)  

recfT1mPortDsx1Distance 1.3.6.1.4.1.16.101.1.2.1.6.1.1.7
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER from0to133ft(1), from134to266ft(2), from267to399ft(3), from400to533ft(4), from534to655ft(5), fccOptionA(6)  

recfT1mPortEquGain 1.3.6.1.4.1.16.101.1.2.1.6.1.1.8
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER g36db(1), g26db(2)  

recfT1mPortBundleMap 1.3.6.1.4.1.16.101.1.2.1.6.1.1.9
Parameter Type = Immediate. Each byte represents a DS0 in T1m Port, starting 1 from the right most byte. The bundle is identified by the number of the lowest DS0 of the bundle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(24)  

recfT1mPortErrorThreshold 1.3.6.1.4.1.16.101.1.2.1.6.1.1.10
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

recfT1mPortSevereThreshold 1.3.6.1.4.1.16.101.1.2.1.6.1.1.11
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

recfT1mPortAlarmThreshold 1.3.6.1.4.1.16.101.1.2.1.6.1.1.12
Parameter Type = Non-intrusive. If port BER quality is below this threshold for four consecutive seconds, a port error alarm will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9  

recfT1mPortFailThreshold 1.3.6.1.4.1.16.101.1.2.1.6.1.1.13
Parameter Type = Non-intrusive. If port BER quality is below this threshold for ten consecutive seconds, a port down alarm will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9  

recfT1mPortFailToggleRequest 1.3.6.1.4.1.16.101.1.2.1.6.1.1.14
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER toggleIfPortFail(61), noToggle(62)  

recfT1mPortOOSBitPattern 1.3.6.1.4.1.16.101.1.2.1.6.1.1.15
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x7f(1), x1a(2), xd5(3), x7e(4)  

recfT1mPortOOSASignaling 1.3.6.1.4.1.16.101.1.2.1.6.1.1.16
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER space(1), mark(2), spaceMark(3), markSpace(4)  

recfT1mPortOOSBSignaling 1.3.6.1.4.1.16.101.1.2.1.6.1.1.17
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER space(1), mark(2), spaceMark(3), markSpace(4)  

recfT1mPortOOSCDSignaling 1.3.6.1.4.1.16.101.1.2.1.6.1.1.18
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER spaceSpace(1), markMark(2), spaceMark(3), markSpace(4)  

recfT1mPortSigInversion 1.3.6.1.4.1.16.101.1.2.1.6.1.1.19
Parameter Type = Intrusive.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), inverted(2)  

recfE1mPortTable 1.3.6.1.4.1.16.101.1.2.1.6.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfE1mPortEntry

recfE1mPortEntry 1.3.6.1.4.1.16.101.1.2.1.6.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfE1mPortEntry  

recfE1mPortAddr 1.3.6.1.4.1.16.101.1.2.1.6.2.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfE1mPortStartMode 1.3.6.1.4.1.16.101.1.2.1.6.2.1.2
Parameter Type = Intrusive. Setting to erase will fail if the port has any unremoved INLs or channels that are not disconnected. Otherwise, it will return the port's configuration to its default values, and erase any bundles, INLs, and channels on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfE1mPortUpdate 1.3.6.1.4.1.16.101.1.2.1.6.2.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateReq(2), resetReq(3)  

recfE1mPortFraming 1.3.6.1.4.1.16.101.1.2.1.6.2.1.4
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER g732n(1), g732s(2)  

recfE1mPortCrcMultiFrame 1.3.6.1.4.1.16.101.1.2.1.6.2.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfE1mPortSigInversion 1.3.6.1.4.1.16.101.1.2.1.6.2.1.6
Parameter Type = Intrusive.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), inverted(2)  

recfE1mPortInternationalBit 1.3.6.1.4.1.16.101.1.2.1.6.2.1.7
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

recfE1mPortNationalBit 1.3.6.1.4.1.16.101.1.2.1.6.2.1.8
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

recfE1mPortTransmitEBit 1.3.6.1.4.1.16.101.1.2.1.6.2.1.9
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfE1mPortReceiveEBit 1.3.6.1.4.1.16.101.1.2.1.6.2.1.10
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER monitor(1), ignore(2)  

recfE1mPortBundleMap 1.3.6.1.4.1.16.101.1.2.1.6.2.1.11
Parameter Type = Immediate. Each byte represents a DS0 in E1m Port, starting 1 from the right most byte. The bundle is identified by the number of the lowest DS0 of the bundle. If framing is g732s, time slot 16 is reserved to be a signalling byte.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(31)  

recfE1mPortErrorThreshold 1.3.6.1.4.1.16.101.1.2.1.6.2.1.12
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

recfE1mPortSevereThreshold 1.3.6.1.4.1.16.101.1.2.1.6.2.1.13
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

recfE1mPortAlarmThreshold 1.3.6.1.4.1.16.101.1.2.1.6.2.1.14
Parameter Type = Non-intrusive. If port BER quality is below this threshold for four consecutive seconds, a port error alarm will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9  

recfE1mPortFailThreshold 1.3.6.1.4.1.16.101.1.2.1.6.2.1.15
Parameter Type = Non-intrusive. If port BER quality is below this threshold for ten consecutive seconds, a port down alarm will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9  

recfE1mPortFailToggleRequest 1.3.6.1.4.1.16.101.1.2.1.6.2.1.16
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER toggleIfPortFail(61), noToggle(62)  

recfE1mPortOOSBitPattern 1.3.6.1.4.1.16.101.1.2.1.6.2.1.17
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x7f(1), x1a(2), xd5(3), x7e(4)  

recfE1mPortOOSASignaling 1.3.6.1.4.1.16.101.1.2.1.6.2.1.18
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER space(1), mark(2), spaceMark(3), markSpace(4)  

recfE1mPortOOSBSignaling 1.3.6.1.4.1.16.101.1.2.1.6.2.1.19
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER space(1), mark(2), spaceMark(3), markSpace(4)  

recfE1mPortOOSCDSignaling 1.3.6.1.4.1.16.101.1.2.1.6.2.1.20
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER spaceSpace(1), markMark(2), spaceMark(3), markSpace(4)  

recfSdmPortTable 1.3.6.1.4.1.16.101.1.2.1.6.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfSdmPortEntry

recfSdmPortEntry 1.3.6.1.4.1.16.101.1.2.1.6.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfSdmPortEntry  

recfSdmPortAddr 1.3.6.1.4.1.16.101.1.2.1.6.3.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfSdmPortStartMode 1.3.6.1.4.1.16.101.1.2.1.6.3.1.2
Parameter Type = Intrusive. Setting to erase will fail if the port has any unremoved INLs or channels that are not disconnected. Otherwise, it will return the port's configuration to its default values, and erase any INLs and channels on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfSdmPortUpdate 1.3.6.1.4.1.16.101.1.2.1.6.3.1.3
Parameter Type = Intrusive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateReq(2), resetReq(3)  

recfSdmPortSpeed 1.3.6.1.4.1.16.101.1.2.1.6.3.1.4
Parameter Type = Intrusive. s is for subrate speeds. b is for bundle speeds (n x 64K). sf is for stuffed speeds (n x 56K). bsf is for speeds that can be bundle (b8bit) or stuffed (b7bit), depending on the value of recfSdmPortBitMode. sf56k is the switched 56k if recfSdmDeviceType=2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER s1200(9), s2400(18), s4800(36), s7200(54), s9600(72), s14400(108), s19200(144), s38400(288), s48000(360), bsf448k(3360), bsf896k(6720), bsf1344k(10080), b64k(480), b128k(960), b192k(1440), b256k(1920), b320k(2400), b384k(2880), b512k(3840), b576k(4320), b640k(4800), b704k(5280), b768k(5760), b832k(6240), b960k(7200), b1024k(7680), b1088k(8160), b1152k(8640), b1216k(9120), b1280k(9600), b1408k(10560), b1472k(11040), b1536k(11520), b1600k(12000), b1664k(12480), b1728k(12960), b1792k(13440), b1856k(13920), b1920k(14400), b1984k(14880), b2048k(15360), sf56k(420), sf112k(840), sf168k(1260), sf224k(1680), sf280k(2100), sf336k(2520), sf392k(2940), sf504k(3780), sf560k(4200), sf616k(4620), sf672k(5040), sf728k(5460), sf784k(5880), sf840k(6300), sf952k(7140), sf1008k(7560), sf1064k(7980), sf1120k(8400), sf1176k(8820), sf1232k(9240), sf1288k(9660)  

recfSdmPortInterface 1.3.6.1.4.1.16.101.1.2.1.6.3.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dte1(1), dte2(2), dte3(3), dce1(4), dce2(5), dce3(6)  

recfSdmPortTxClockSource 1.3.6.1.4.1.16.101.1.2.1.6.3.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER system(1), receive(2), send(3)  

recfSdmPortBitMode 1.3.6.1.4.1.16.101.1.2.1.6.3.1.7
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b7bit(1), b8bit(2)  

recfSdmPortOOSOper 1.3.6.1.4.1.16.101.1.2.1.6.3.1.8
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER doNothing(1), forceFNS(2), mark(3), markFF(4), space(5), spaceFF(6)  

recfSdmPortGen 1.3.6.1.4.1.16.101.1.2.1.6.3.1.9
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dsrDtr(2), trans(3)  

recfSdmPortPolarity 1.3.6.1.4.1.16.101.1.2.1.6.3.1.10
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), inverted(2)  

recfSdmPortType 1.3.6.1.4.1.16.101.1.2.1.6.3.1.11
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER null(1), io(2), bandContent(3), inl(4), fsm16Connect(5)  

recfSdmPortINLNumber 1.3.6.1.4.1.16.101.1.2.1.6.3.1.12
Parameter Type = Intrusive. Applicable only if recfSdmPortType is set to inl.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

recfSdmDeviceType 1.3.6.1.4.1.16.101.1.2.1.6.3.1.13
Parameter Type = Intrusive. This field indicates the type of device connected to the port. Values 1-10 and 255 are reserved by ST-50, of which 1 is for voice, 2 is for switch 56, 3 is for clear channel, and 255 is for INL. Values 11 to 254 can be used by the user to define user-specific device types. For TDM channels connected between I/O ports, the channel will not connect if the device types do not match. For I/O to server port connections, the device types will not be compared. This field is not used by the ST node if recfSdmPortType is null or inl. Note that if the recfSdmPortType is inl but this field is not 255, the inl will not be failed. Also, if the recfSdmPortType is not inl but this field is 255, then the channel defined on this port will still be able to connect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfSdmPortPartitionID 1.3.6.1.4.1.16.101.1.2.1.6.3.1.14
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfSdmPortFunctions 1.3.6.1.4.1.16.101.1.2.1.6.3.1.15
Parameter Type = Intrusive. The four least significant bits represent whether the function mapped to that bit should be forced or not. bit 1 (lsb) - DSR if DCE, DTR if DTE bit 2 - DCD if DCE, RTS if DTE bit 3 - reserved bit 4 - CTS if DCE, reserved if DTE The four most significant bits represent what the function mapped to that bit should be forced to when that function is suppose to be forced. bit 5 - DSR if DCE, DTR if DTE bit 6 - DCD if DCE, RTS if DTE bit 7 - reserved bit 8 - CTS if DCE, reserved if DTE
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

recfSdmPortContentionSet 1.3.6.1.4.1.16.101.1.2.1.6.3.1.16
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER f1nf1(1), f2nf2(2), f4nf4(7), nf4f4(8), disable(255)  

recfSdmPortLoopbackSupport 1.3.6.1.4.1.16.101.1.2.1.6.3.1.17
Parameter Type = Intrusive. Indicates whether the SDM port should support the signals for LL, RL, and TM. If a signal is supported, then that loopback signal will be recognized by the SDM. Otherwise, the signal will be ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(15), ll(13), rl(11), tm(7), llRl(9), llTm(5), rlTm(3), llRlTm(1)  

recfSdmPortSatelliteBuffer 1.3.6.1.4.1.16.101.1.2.1.6.3.1.18
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(15), disable(3)  

recfSdmPortFailToggleRequest 1.3.6.1.4.1.16.101.1.2.1.6.3.1.19
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER toggleIfPortFail(61), noToggle(62)  

recfSdmPortKGPolarity 1.3.6.1.4.1.16.101.1.2.1.6.3.1.20
Parameter Type = Intrusive. Specifies the polarity of KG-resync signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER kgPositive(1), kgNegative(2)  

recfSdmPortKGSignalType 1.3.6.1.4.1.16.101.1.2.1.6.3.1.21
Parameter Type = Intrusive. Specifies the type of of KG-resync signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER kgPulse(1), kgLevel(2)  

recfSdmPortKGMode 1.3.6.1.4.1.16.101.1.2.1.6.3.1.22
Parameter Type = Intrusive. Specifies the KG-resync mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER kgEnable(1), kgDisable(2)  

recfBundleTable 1.3.6.1.4.1.16.101.1.2.1.7
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfBundleEntry

recfBundleEntry 1.3.6.1.4.1.16.101.1.2.1.7.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfBundleEntry  

recfBundleAddr 1.3.6.1.4.1.16.101.1.2.1.7.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BundleAddr  

recfBundleStartMode 1.3.6.1.4.1.16.101.1.2.1.7.1.2
Parameter Type = Intrusive. Setting to erase will fail if the bundle has an unremoved INL or a channel that is not disconnected. Otherwise, it will erase the bundle configuration as well as the INL or channel defined on the bundle. It will also erase this bundle from the T1M or E1M port bundle map.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfBundleUpdate 1.3.6.1.4.1.16.101.1.2.1.7.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateReq(2), resetReq(3)  

recfBundleSignaling 1.3.6.1.4.1.16.101.1.2.1.7.1.4
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), a(2), ab(3), abcd(4)  

recfBundleOOSBitPattern 1.3.6.1.4.1.16.101.1.2.1.7.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x7f(1), x1a(2), xd5(3), x7e(4)  

recfBundleOOSASignaling 1.3.6.1.4.1.16.101.1.2.1.7.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER space(1), mark(2), spaceMark(3), markSpace(4)  

recfBundleOOSBSignaling 1.3.6.1.4.1.16.101.1.2.1.7.1.7
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER space(1), mark(2), spaceMark(3), markSpace(4)  

recfBundleOOSCDSignaling 1.3.6.1.4.1.16.101.1.2.1.7.1.8
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER spaceSpace(1), markMark(2), spaceMark(3), markSpace(4)  

recfBundleNullIdlePattern 1.3.6.1.4.1.16.101.1.2.1.7.1.9
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER space(1), mark(2)  

recfBundleBwCntIdlePattern 1.3.6.1.4.1.16.101.1.2.1.7.1.10
Parameter Type = Intrusive. Bit pattern output to equipment indicating bundle availability. T1M bundles will have a default pattern of a0-b0-c0-d0. E1M bundles will have a default pattern of a0-b1-c0-d1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a0-b0-c0-d0(16), a0-b0-c0-d1(8), a0-b0-c1-d0(4), a0-b0-c1-d1(12), a0-b1-c0-d0(2), a0-b1-c0-d1(10), a0-b1-c1-d0(6), a0-b1-c1-d1(14), a1-b0-c0-d0(1), a1-b0-c0-d1(9), a1-b0-c1-d0(5), a1-b0-c1-d1(13), a1-b1-c0-d0(3), a1-b1-c0-d1(11), a1-b1-c1-d0(7), a1-b1-c1-d1(15)  

recfBundleBusyOutTimer 1.3.6.1.4.1.16.101.1.2.1.7.1.11
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sec5(5), sec10(10), sec20(20), sec30(30), sec40(40), sec50(50), sec60(60), sec70(70), sec80(80), sec90(90), sec100(100), sec110(110), sec120(120), sec130(130), sec140(140), sec150(150), sec160(160), sec170(170), sec180(180), sec190(190), sec200(200), sec210(210), sec220(220), sec230(230), sec240(240), permanent(255)  

recfBundleSeizureTime 1.3.6.1.4.1.16.101.1.2.1.7.1.12
Parameter Type = Non-intrusive. For bandwidth contention channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ms50(1), ms100(2), ms150(3), ms200(4), ms250(5), ms300(6), ms350(7), ms400(8), ms450(9), ms500(10), ms550(11), ms600(12), ms650(13), ms700(14), ms750(15), ms800(16), ms850(17), ms900(18), ms950(19), ms1000(20)  

recfBundlePreemptionTime 1.3.6.1.4.1.16.101.1.2.1.7.1.13
Parameter Type = Non-intrusive. For bandwidth contention channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), ms250(2), ms300(3), ms350(4), ms400(5), ms450(6), ms500(7), ms550(8), ms600(9), ms650(10), ms700(11), ms750(12), ms800(13), ms850(14), ms900(15), ms950(16), s1(20), s2(21), s3(22), s4(23), s5(24), s6(25), s7(26), s8(27), s9(28), s10(29)  

recfBundleOrgDisconnectTime 1.3.6.1.4.1.16.101.1.2.1.7.1.14
Parameter Type = Non-intrusive. For bandwidth contention channel. Units that start with 's' are in units of 1/10 seconds (i.e., s10 is 1.0 seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ms150(1), ms200(2), ms250(3), ms300(4), ms350(5), ms400(6), ms450(7), ms500(8), s10(11), s15(12), s20(13), s25(14), s30(15), s35(16), s40(17), s45(18), s50(19), s55(20), s60(21), s65(22), s70(23), s75(24), s80(25), s85(26), s90(27), s95(28), s100(29), s105(30), s110(31), s115(32), s120(33), s125(34), s130(35), s135(36), s140(37), s145(38), s150(39), s155(40), s160(41), s165(42), s170(43), s175(44), s180(45), s185(46), s190(47), s195(48), s200(49), s205(50), s210(51), s215(52), s220(53), s225(54), s230(55), s235(56), s240(57), s245(58), s250(59), s255(60), s260(61), s265(62), s270(63), s275(64), s280(65), s285(66), s290(67), s295(68), s300(69), s305(70), s310(71), s315(72), s320(73), s325(74), s330(75), s335(76), s340(77), s345(78), s350(79), s355(80), s360(81), s365(82), s370(83), s375(84), s380(85), s385(86), s390(87), s395(88), s400(89), s405(90), s410(91)  

recfBundleAttenuationRx 1.3.6.1.4.1.16.101.1.2.1.7.1.15
Parameter Type = Intrusive. For voice channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER p0db(2), p3db(3), p6db(4), p9db(5)  

recfBundleAttenuationTx 1.3.6.1.4.1.16.101.1.2.1.7.1.16
Parameter Type = Intrusive. For voice channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER p0db(2), p3db(3), p6db(4), p9db(5)  

recfBundleType 1.3.6.1.4.1.16.101.1.2.1.7.1.17
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER null(1), io(2), bandContent(3), inl(4)  

recfBundleINLNumber 1.3.6.1.4.1.16.101.1.2.1.7.1.18
Parameter Type = Internal. Applicable only if recfBundleType is set to inl.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

recfBundleDeviceType 1.3.6.1.4.1.16.101.1.2.1.7.1.19
Parameter Type = Non-intrusive. This field indicates the type of device connected to the port. Values 1-10 and 255 are reserved by ST-50, of which 1 is for voice, 2 is for switch 56, 3 is for clear channel, and 255 is for INL. Values 11 to 254 can be used by the user to define user-specific device types. For TDM channels connected between I/O ports, the channel will not connect if the device types do not match. For I/O to server port connections, the device types will not be compared. This field is not used by the ST node if recfBundleType is null or inl. Note that if the recfBundleType is inl but this field is not 255, the inl will not be failed. Also, if the recfBundleType is not inl but this field is 255, then the channel defined on this port will still be able to connect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfBundleContentionSet 1.3.6.1.4.1.16.101.1.2.1.7.1.20
Parameter Type = Intrusive. If bundle type is not bandwidth contention, this field is ignored. This field defines the type of contention application. E&M contention type is to be used for E&M connections. FXO contention type is to be used for FXO channels in FXO/FXS contention mode. FXS contention type is to be used for FXS channels in FXO/FXS contention mode. FXS-ARD contention type is to be used for FXS auto ring down channels in contention mode. SIGNALINVERT contention type is NOT used any more. For the polarity of signal bit defintion for channel connect/disconnect, see description in recfBundleSigInversion.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER em(1), signalInvert(3), fxo(4), fxs-ard(5), fxs(6), disable(2)  

recfBundlePartitionID 1.3.6.1.4.1.16.101.1.2.1.7.1.21
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfBundleBwCntBusyPattern 1.3.6.1.4.1.16.101.1.2.1.7.1.22
Parameter Type = Intrusive. Bit pattern output to equipment indicating bundle busy. If the value is oos, then the busy pattern will be the same as the OOS idle pattern. If the value is reverse, then the busy pattern's A bit will be the inverse of the A bit value from the bundle bandwidth contention idle pattern. For T1M bundles, the B, C, and D bits will follow the A bit of the busy pattern. For E1M bundles, the B bit will be 1, the C bit will be 0, and the D bit will be 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a0-b0-c0-d0(16), a0-b0-c0-d1(8), a0-b0-c1-d0(4), a0-b0-c1-d1(12), a0-b1-c0-d0(2), a0-b1-c0-d1(10), a0-b1-c1-d0(6), a0-b1-c1-d1(14), a1-b0-c0-d0(1), a1-b0-c0-d1(9), a1-b0-c1-d0(5), a1-b0-c1-d1(13), a1-b1-c0-d0(3), a1-b1-c0-d1(11), a1-b1-c1-d0(7), a1-b1-c1-d1(15), oos(254), reverse(255)  

recfBundleSigInversion 1.3.6.1.4.1.16.101.1.2.1.7.1.23
Parameter Type = Intrusive. INTRODUCED 2.0.0 For an E1M bundle, the meanings of these values are reversed. That is, if this parameter is set as normal, the ABCD signal polarity will be inverted on the ST bus. If it is set as inverted, the ABCD signal polarity will NOT be inverted on the ST bus. Contention channel connect/disconnect will be affected by this filed: a) For a T1M bundle set as normal or an E1M bundle set as inverted: If recfBundleContentionSet is set as E&M: Connections are initiated when the incoming A bit is set to 1. Disconnections are triggered when the incoming A bit is set to 0. If recfBundleContentionSet is set as FXS: Connections are initiated when the incoming A bit is set to 1. Disconnections are triggered when the incoming A bit is set to 0. If recfBundleContentionSet is set as FXO: Connections are initiated when the incoming B bit is set to 0. Before FXS answers the call, disconnections will be triggered when the B bit is set to 1. If recfBundleContentionSet is set as FXS-ARD: Connections are initiated when the incoming A bit is set to 0. Disconnections are triggered when the incoming A bit is a 1. b) For a T1M bundle set as inverted or an E1M bundle set as normal: If recfBundleContentionSet is set as E&M: Connections are initiated when the incoming A bit is set to 0. Disconnections are triggered when the incoming A bit is set to 1. If recfBundleContentionSet is set as FXS: Connections are initiated when the incoming A bit is set to 0. Disconnections are triggered when the incoming A bit is set to 1. If recfBundleContentionSet is set as FXO: Connections are initiated when the incoming B bit is set to 1. Before FXS answers the call, disconnections will be triggered when the B bit is set to 0. If recfBundleContentionSet is set as FXS-ARD: Connections are initiated when the incoming A bit is set to 1. Disconnections are triggered when the incoming A bit is set to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), inverted(2)  

recfBundleDataPolarity 1.3.6.1.4.1.16.101.1.2.1.7.1.24
Parameter Type = Intrusive. INTRODUCED 2.0.0 The default value must be used unless specific user equipment explicitly requires data to be inverted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), inverted(2)  

recfBundlePCMLaw 1.3.6.1.4.1.16.101.1.2.1.7.1.25
Parameter Type = Intrusive. INTRODUCED 2.0.0 The values specify the following setup: - T1M - u_Law E1M - a_Law - T1M - a_Law E1M - u_Law.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER native(1), converted(2)  

recfINLTable 1.3.6.1.4.1.16.101.1.2.1.8
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfINLEntry

recfINLEntry 1.3.6.1.4.1.16.101.1.2.1.8.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfINLEntry  

recfINLNumber 1.3.6.1.4.1.16.101.1.2.1.8.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..31  

recfINLAddr 1.3.6.1.4.1.16.101.1.2.1.8.1.2
Parameter Type = Intrusive. Setting this field will set the INL number field in the port or bundle configuration to this INL's number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  BundleAddr  

recfINLStartMode 1.3.6.1.4.1.16.101.1.2.1.8.1.3
Parameter Type = Intrusive. Setting to erase will fail if the INL has not been removed. Otherwise, it will erase the INL configuration, and set the INL number field in the port or bundle configuration to zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfINLUpdate 1.3.6.1.4.1.16.101.1.2.1.8.1.4
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateReq(2), resetReq(3)  

recfINLArqCir 1.3.6.1.4.1.16.101.1.2.1.8.1.5
Parameter Type = Intrusive. Unit of bps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2048000  

recfINLMaxPacketDS0 1.3.6.1.4.1.16.101.1.2.1.8.1.6
Parameter Type = Intrusive. Maximum packet bandwidth, in units of DS0. (INL Bandwidth - recfMaxPacketDS0) is the guaranteed TDM bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

recfINLPacketCirOccupy 1.3.6.1.4.1.16.101.1.2.1.8.1.7
Parameter Type = Intrusive. This number represents the CIR occupancy percentage (x) of the packet band bandwidth. The INL bandwidth allocation shall follow the following rules: 1. (SUM of all TDM channel bandwidth) <= INLMaxTDMDS0 2. (SUM of all packet channel CIR) <= x * INLMaxPacketDS0 3. (SUM of all TDM channel bandwidth) + 1/x * (SUM of all packet channel CIR ) <= INL Bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

recfINLMaxTDMDS0 1.3.6.1.4.1.16.101.1.2.1.8.1.8
Parameter Type = Intrusive. Maximum TDM bandwidth, in units of DS0. (INL Bandwidth - recfMaxTDMDS0) is the guaranteed packet bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

recfINLGroup 1.3.6.1.4.1.16.101.1.2.1.8.1.9
Parameter Type = Non-intrusive. Up to seven groups for each INL. Bit map bits 1 (lsb) to 7 indicates the group(s) of the INL.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

recfINLCost 1.3.6.1.4.1.16.101.1.2.1.8.1.10
Parameter Type = Non-intrusive. Assigned by user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

recfINLEncryption 1.3.6.1.4.1.16.101.1.2.1.8.1.11
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), encrypted(2)  

recfINLSatelliteHop 1.3.6.1.4.1.16.101.1.2.1.8.1.12
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

recfINLOOSTimer 1.3.6.1.4.1.16.101.1.2.1.8.1.13
Parameter Type = Non-intrusive. In units of seconds. To disqualify a INL beyond.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

recfINLOrig 1.3.6.1.4.1.16.101.1.2.1.8.1.14
Parameter Type = Internal. For EMS usage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

recfINLRemoteNodeID 1.3.6.1.4.1.16.101.1.2.1.8.1.15
Parameter Type = Intrusive. 0 means don't care.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

recfINLRemoteINLID 1.3.6.1.4.1.16.101.1.2.1.8.1.16
Parameter Type = Intrusive. INL number of remote side. 0 means don't care.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

recfINLPartitionID 1.3.6.1.4.1.16.101.1.2.1.8.1.17
Parameter Type = Internal. Used by security server to enforce shared node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

recfINLKGMode 1.3.6.1.4.1.16.101.1.2.1.8.1.18
Parameter Type = Internal. Used by Link Maintenance to take action in KG-resync mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER kgEnable(1), kgDisable(2)  

recfTDMChannelTable 1.3.6.1.4.1.16.101.1.2.1.9
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfTDMChannelEntry

recfTDMChannelEntry 1.3.6.1.4.1.16.101.1.2.1.9.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfTDMChannelEntry  

recfTDMChannelAddr 1.3.6.1.4.1.16.101.1.2.1.9.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

recfTDMChannelDestNodeID 1.3.6.1.4.1.16.101.1.2.1.9.1.2
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

recfTDMChannelDestAddr 1.3.6.1.4.1.16.101.1.2.1.9.1.3
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ChannelAddr  

recfTDMChannelControlMode 1.3.6.1.4.1.16.101.1.2.1.9.1.4
Parameter Type = Intrusive. Indicates whether the channel can be used in a connection request or not. The value erase is used to wipe out the channel configuration MIB. Setting this to erase will not succeed if the channel is not disconnected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

recfTDMChannelUpdate 1.3.6.1.4.1.16.101.1.2.1.9.1.5
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfTDMChannelModuleType 1.3.6.1.4.1.16.101.1.2.1.9.1.6
Parameter Type = Internal. The type of module on which this channel endpoint is located. Derived from the port or that the channel is configured on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER t1m(5), e1m(6), sgm(7), lgm(8), asm(9), fsm(11), sdm(12), sgmAg(13), rtm(14), dsm(19), e3m(20)  

recfTDMChannelDeviceType 1.3.6.1.4.1.16.101.1.2.1.9.1.7
Parameter Type = Internal. The type of device connected to this channel endpoint. Derived from the port or bundle that the channel is configured on. Always zero for server ports. Values 1-10 are reserved by ST-50, of which 1 is for voice, 2 is for switch 56, and 3 is for clear channel. Values 11 and up can be used by the user to define user-specific device types. For TDM channels connected between I/O ports, the channel will not connect if the device types do not match. For I/O to server port connections, the device types will not be compared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

recfTDMChannelProfile 1.3.6.1.4.1.16.101.1.2.1.9.1.8
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfTDMChannelOrig 1.3.6.1.4.1.16.101.1.2.1.9.1.9
Parameter Type = Internal. For EMS usage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

recfTDMChannelPartitionID 1.3.6.1.4.1.16.101.1.2.1.9.1.10
Parameter Type = Internal. Used by security server to enforce shared node. Derived from end point.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

recfTDMChannelState 1.3.6.1.4.1.16.101.1.2.1.9.1.11
Parameter Type = Internal. If value is connected, then restChannelStatus is also set to connected. If value is processing, then restChannelStatus is set to any value besides connected and disconnected. For all other values, restChannelStatus is set to disconnected and this attribute specifies the reason for the disconnection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(35), processing(34), nodeReset(33), noSourceIoMIB(86), noSourceChProfile(110), noDestChProfile(111), sourceIoUnusable(88), destIoUnusable(112), sourceChMibOff(117), destChMibOff(118), noDestChMIB(89), noDestIoMIB(90), notMatchDeviceType(91), notMatchIoSpeed(92), notMatchPartition(93), notMatchBitMode(113), notMatchSignalling(114), destBusy(115), destMismatch(116), contentionTerminate(104), userInitiate(105), noInlBw(41), noRoute(42), noServer(30), sourceExceedSharedBw(119), destExceedSharedBw(120), disconnectedSAF(125), rejectBySourceModule(128), rejectByDestModule(129), channelLimitExceeded(130), linkDisconnectError(94), noBypassServer(151), noSrcServer(152), noDestServer(153), noSrcSgmSaf(154), noDestSgmSaf(155), noSrcSgmScf(156), noDestSgmScf(157), noSrcAgmSaf(158), noDestAgmSaf(159), noSrcAgmScf(160), noDestAgmScf(161), noSrcAsmSaf(162), noDestAsmSaf(163), noSrcAsmScf(164), noDestAsmScf(165), noSrcLgmSaf(166), noDestLgmSaf(167), noSrcLgmScf(168), noDestLgmScf(169), noSrcRtmSaf(170), noDestRtmSaf(171), noSrcRtmScf(172), noDestRtmScf(173), noSrcVoicePort(174), noDestVoicePort(175), notApplicable(255)  

recfTDMChannelDestCheckMode 1.3.6.1.4.1.16.101.1.2.1.9.1.12
Parameter Type = Intrusive. Indicates if the remote node ID and remote address in the destination's channel MIB need to verify the source's node ID and address before allowing a channel connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfTDMChannelConnectMode 1.3.6.1.4.1.16.101.1.2.1.9.1.13
Parameter Type = Intrusive. Indicates whether a channel should be automatically connected when a port comes up, or if the user is responsible for connecting the channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER autoConnect(1), userInitiate(2)  

recfTDMChannelSpecialPrfType 1.3.6.1.4.1.16.101.1.2.1.9.1.14
Parameter Type = Intrusive. INTRODUCED 2.0.0 Specifies the type of special profile that is used on this channel connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER voiceProfile(1), dataProfile(2), none(255)  

recfTDMChannelSpecialProfile 1.3.6.1.4.1.16.101.1.2.1.9.1.15
Parameter Type = Intrusive. INTRODUCED 2.0.0 Specifies the particular special profile index used on this channel connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfTDMChannelDestNodeType 1.3.6.1.4.1.16.101.1.2.1.9.1.16
Parameter Type = Intrusive. INTRODUCED 2.0.0 This attribute defines the type of the destination node for this channel. If set to , then the LGM translation table entry indexed by the value of recfTDMChannelDestAddr will be allocated, with the Link2TraStAddr attribute set to the value of recfTDMChannelAddr for this TDM channel. If this attribute has an illegal translation table index value, the command should fail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER st(1), link(2)  

recfFrame 1.3.6.1.4.1.16.101.1.2.1.10
OBJECT IDENTIFIER    

recfFrPortTable 1.3.6.1.4.1.16.101.1.2.1.10.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfFrPortEntry

recfFrPortEntry 1.3.6.1.4.1.16.101.1.2.1.10.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfFrPortEntry  

recfFrPortAddr 1.3.6.1.4.1.16.101.1.2.1.10.1.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfFrPortDescription 1.3.6.1.4.1.16.101.1.2.1.10.1.1.2
Parameter Type = Intrusive. Used by EMS ITM and other applications.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

recfFrPortStartMode 1.3.6.1.4.1.16.101.1.2.1.10.1.1.3
Parameter Type = Intrusive. Setting this to erase will erase the port configuration MIB, as well as any TDM and frame relay channels defined on this port. The erase will not succeed if any of the channels on the port are not disconnected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfFrPortUpdate 1.3.6.1.4.1.16.101.1.2.1.10.1.1.4
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfFrPortLmiActive 1.3.6.1.4.1.16.101.1.2.1.10.1.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ansi617D(1), ccittQ933A(2), disabled(3)  

recfFrPortLmiPollingTimer 1.3.6.1.4.1.16.101.1.2.1.10.1.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sec5(1), sec10(2), sec15(3), sec20(4), sec25(5), sec30(6)  

recfFrPortLmiWaitingTimer 1.3.6.1.4.1.16.101.1.2.1.10.1.1.7
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sec5(1), sec10(2), sec15(3), sec20(4), sec25(5), sec30(6)  

recfFrPortLmiFullEnqInterval 1.3.6.1.4.1.16.101.1.2.1.10.1.1.8
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfFrPortLmiMonitoredEvents 1.3.6.1.4.1.16.101.1.2.1.10.1.1.9
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

recfFrPortErrorThreshold 1.3.6.1.4.1.16.101.1.2.1.10.1.1.10
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

recfFrPortDeviceType 1.3.6.1.4.1.16.101.1.2.1.10.1.1.11
Parameter Type = Intrusive. Indicates port usage. For regular HDLC ports, only one connection can be made. All HDLC ports shall be connected to an SDM I/O port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER networkToUser(1), userToNetwork(2), networkToNetwork(3), regularHdlc(5), ad10(4)  

recfFrPortAd10NodeID 1.3.6.1.4.1.16.101.1.2.1.10.1.1.12
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

recfFrPortAd10PortID 1.3.6.1.4.1.16.101.1.2.1.10.1.1.13
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortAddr  

recfFrPortBitMode 1.3.6.1.4.1.16.101.1.2.1.10.1.1.14
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b7bit(1), b8bit(2)  

recfFrPortMaxFrameSize 1.3.6.1.4.1.16.101.1.2.1.10.1.1.15
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..4096  

recfFrPortSharedZeroFlag 1.3.6.1.4.1.16.101.1.2.1.10.1.1.16
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

recfFrPortMaxCIR 1.3.6.1.4.1.16.101.1.2.1.10.1.1.17
Parameter Type = Intrusive. This value (in units of bps) is used to determine how many packets per second the I/O to server connection will require from the FSM module resources.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3000000  

recfFrPortAvgPktSize 1.3.6.1.4.1.16.101.1.2.1.10.1.1.18
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b32(1), b64(2), b128(3), b256(4)  

recfFrPortAllocationPref 1.3.6.1.4.1.16.101.1.2.1.10.1.1.19
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dontCare(1), fsm16(2), fsm64(3)  

recfFrPortBillingSegSize 1.3.6.1.4.1.16.101.1.2.1.10.1.1.20
Parameter Type = Intrusive. THIS ATTRIBUTE IS NOT USED.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b64(2), b128(3), b256(4), b512(5), b1024(6), pktsize(1)  

recfFrPortBillingControl 1.3.6.1.4.1.16.101.1.2.1.10.1.1.21
Parameter Type = Intrusive. THIS ATTRIBUTE IS NOT USED.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfFrPortPartitionID 1.3.6.1.4.1.16.101.1.2.1.10.1.1.22
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfFrPortEncodingType 1.3.6.1.4.1.16.101.1.2.1.10.1.1.23
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nrz(1), nrzb(2), nrzi-space(4), nrzi-mark(3)  

recfFrChannelTable 1.3.6.1.4.1.16.101.1.2.1.10.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfFrChannelEntry

recfFrChannelEntry 1.3.6.1.4.1.16.101.1.2.1.10.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfFrChannelEntry  

recfFrChannelAddr 1.3.6.1.4.1.16.101.1.2.1.10.2.1.1
Parameter Type = Internal. If the end point is a HDLC port, EMS can define a DLCI (1-1023)
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

recfFrChannelDestNodeID 1.3.6.1.4.1.16.101.1.2.1.10.2.1.2
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

recfFrChannelDestAddr 1.3.6.1.4.1.16.101.1.2.1.10.2.1.3
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ChannelAddr  

recfFrChannelControlMode 1.3.6.1.4.1.16.101.1.2.1.10.2.1.4
Parameter Type = Intrusive. Indicates whether the channel can be used in a connection request or not. The value erase is used to wipe out the channel configuration MIB. Setting this to erase will not succeed if the channel is not disconnected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

recfFrChannelUpdate 1.3.6.1.4.1.16.101.1.2.1.10.2.1.5
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfFrChannelType 1.3.6.1.4.1.16.101.1.2.1.10.2.1.6
Parameter Type = Intrusive. When a channel is added, a notification shall be sent to the associated FSM through maintenance agent. Regular connection is point-to-point. Express routing is for TimeLan Router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), expressRouting(3)  

recfFrChannelCirTransPriority 1.3.6.1.4.1.16.101.1.2.1.10.2.1.7
Parameter Type = Intrusive. Use high for timing critical traffic. 7 is the highest priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

recfFrChannelCIR 1.3.6.1.4.1.16.101.1.2.1.10.2.1.8
Parameter Type = Intrusive. Commit information rate (bps).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2048000  

recfFrChannelEIR 1.3.6.1.4.1.16.101.1.2.1.10.2.1.9
Parameter Type = Intrusive. Excessive information rate (bps).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2048000  

recfFrChannelBc 1.3.6.1.4.1.16.101.1.2.1.10.2.1.10
Parameter Type = Intrusive. Commit burst rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

recfFrChannelProfile 1.3.6.1.4.1.16.101.1.2.1.10.2.1.11
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfFrChannelOrig 1.3.6.1.4.1.16.101.1.2.1.10.2.1.12
Parameter Type = Internal. For EMS internal usage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

recfFrChannelPartitionID 1.3.6.1.4.1.16.101.1.2.1.10.2.1.13
Parameter Type = Intrusive. Used for security on shared nodes. For channels defined on FSM port, this attribute can only be set to the port partition ID. For channels defined on DSM PVC port: - on dedicated/root nodes may be set only to the node owner partition ID; - on shared nodes may be set to any partition ID in the node access list.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfFrChannelState 1.3.6.1.4.1.16.101.1.2.1.10.2.1.14
Parameter Type = Internal. If value is connected, then restChannelStatus is also set to connected. If value is processing, then restChannelStatus is set to any value besides connected and disconnected. For all other values, restChannelStatus is set to disconnected and this attribute specifies the reason for the disconnection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(35), processing(34), nodeReset(33), noSourceIoMIB(86), noSourceChProfile(110), noDestChProfile(111), sourceIoUnusable(88), destIoUnusable(112), sourceChMibOff(117), destChMibOff(118), noDestChMIB(89), noDestIoMIB(90), notMatchDeviceType(91), notMatchIoSpeed(92), notMatchPartition(93), destBusy(115), destMismatch(116), contentionTerminate(104), userInitiate(105), noInlBw(41), noRoute(42), noServer(30), sourceExceedSharedBw(119), destExceedSharedBw(120), rejectBySourceModule(128), rejectByDestModule(129), sourceHdlcExcessDlcis(130), destHdlcExcessDlcis(131), sourceNoAvailableDlcis(132), destNoAvailableDlcis(133), sourceNoAvailablePvc(134), destNoAvailablePvc(135), bypassNoAvailablePvc(136), sourceNoAvailableThroughput(137), destNoAvailableThroughput(138), sourceNoAvailableModuleMemory(139), destNoAvailableModuleMemory(140), bypassNoAvailableThroughput(141), noBypassServer(151), noSrcServer(152), noDestServer(153), notApplicable(255)  

recfFrChannelDestCheckMode 1.3.6.1.4.1.16.101.1.2.1.10.2.1.15
Parameter Type = Intrusive. Indicates if the remote node ID and remote address in the destination's channel MIB need to verify the source's node ID and address before allowing a channel connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfFrChannelConnectMode 1.3.6.1.4.1.16.101.1.2.1.10.2.1.16
Parameter Type = Intrusive. Indicates whether a channel should be automatically connected when a port comes up, or if the user is responsible for connecting the channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER autoConnect(1), userInitiate(2)  

recfFrChannelModuleType 1.3.6.1.4.1.16.101.1.2.1.10.2.1.17
Parameter Type = Internal. The type of module on which this channel endpoint is located. Derived from the port or that the channel is configured on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fsm(11), dsm(19)  

recfAd10Port 1.3.6.1.4.1.16.101.1.2.1.11
OBJECT IDENTIFIER    

recfAd10AgmPortTable 1.3.6.1.4.1.16.101.1.2.1.11.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfAd10AgmPortEntry

recfAd10AgmPortEntry 1.3.6.1.4.1.16.101.1.2.1.11.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfAd10AgmPortEntry  

recfAd10AgmPortAddr 1.3.6.1.4.1.16.101.1.2.1.11.1.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfAd10AgmPortStartMode 1.3.6.1.4.1.16.101.1.2.1.11.1.1.2
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfAd10AgmPortUpdate 1.3.6.1.4.1.16.101.1.2.1.11.1.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfAd10AgmPortSpeed 1.3.6.1.4.1.16.101.1.2.1.11.1.1.4
Parameter Type = Intrusive. The 19.2 kbps speed is not supported on SGM/AG modules with a hardware subtype of 1 or 3. The 56 kbps speed is not supported on SGM/AG modules with a hardware subtype of 3 or 4. The 128 kbps speed is not supported on SGM/AG modules with a hardware subtype of 1 or 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b19200(144), b56000(420), b64000(480), b128000(960)  

recfAd10AgmPortDef 1.3.6.1.4.1.16.101.1.2.1.11.1.1.5
Parameter Type = Internal. Defines AD-10 port usage. Each OCTET indicates an AD-10 port type. FF for not defined, 1 for data, 2 for voice and 3 for packet band.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(64)  

recfAd10AgmPortPartitionID 1.3.6.1.4.1.16.101.1.2.1.11.1.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfAd10DataPortTable 1.3.6.1.4.1.16.101.1.2.1.11.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfAd10DataPortEntry

recfAd10DataPortEntry 1.3.6.1.4.1.16.101.1.2.1.11.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfAd10DataPortEntry  

recfAd10DataPortAddr 1.3.6.1.4.1.16.101.1.2.1.11.2.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ad10PortAddr  

recfAd10DataPortStartMode 1.3.6.1.4.1.16.101.1.2.1.11.2.1.2
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfAd10DataPortUpdate 1.3.6.1.4.1.16.101.1.2.1.11.2.1.3
Parameter Type = Internal. If set to resetReq, need to reset the AD-10 data port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfAd10DataPortPhysSlot 1.3.6.1.4.1.16.101.1.2.1.11.2.1.4
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a(1), b(2), c(3), d(4)  

recfAd10DataPortPhysPort 1.3.6.1.4.1.16.101.1.2.1.11.2.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

recfAd10DataPortTDMDataRate 1.3.6.1.4.1.16.101.1.2.1.11.2.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b1200(9), b2400(18), b4800(36), b7200(54), b9600(72), b12000(90), b14400(108), b16000(120), b16800(126), b19200(144), b24000(180), b28800(216), b32000(240), b38400(288), b48000(360), b56000(420), disabled(65535)  

recfAd10DataPortType 1.3.6.1.4.1.16.101.1.2.1.11.2.1.7
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tdm-sync(1), stat-mux-async(2), bisync(3), hdlc(4)  

recfAd10VoicePortTable 1.3.6.1.4.1.16.101.1.2.1.11.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfAd10VoicePortEntry

recfAd10VoicePortEntry 1.3.6.1.4.1.16.101.1.2.1.11.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfAd10VoicePortEntry  

recfAd10VoicePortAddr 1.3.6.1.4.1.16.101.1.2.1.11.3.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ad10PortAddr  

recfAd10VoicePortStartMode 1.3.6.1.4.1.16.101.1.2.1.11.3.1.2
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfAd10VoicePortUpdate 1.3.6.1.4.1.16.101.1.2.1.11.3.1.3
Parameter Type = Internal. If set to resetReq, need to reset the AD-10 voice port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfAd10VoicePortPhysSlot 1.3.6.1.4.1.16.101.1.2.1.11.3.1.4
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

recfAd10VoicePortPhysPort 1.3.6.1.4.1.16.101.1.2.1.11.3.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

recfAd10VoicePortDBAMode 1.3.6.1.4.1.16.101.1.2.1.11.3.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

recfAd10VoicePortCompressMode 1.3.6.1.4.1.16.101.1.2.1.11.3.1.7
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tCelp(1), atc(2)  

recfAd10VoicePortFaxMode 1.3.6.1.4.1.16.101.1.2.1.11.3.1.8
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER faxIIIenable-NSFenable(1), faxIIIenable-NSFdisable(2), faxIIIdisable-NSFdontcare(3)  

recfAd10VoicePortSpeed 1.3.6.1.4.1.16.101.1.2.1.11.3.1.9
Parameter Type = Intrusive. The compressed channel data rate for this AD-10 voice port. For ports using a CELP compression algorithm, only speeds of 5.333 Kbps, 7.2 Kbps, 8 Kbps, and 9.6 Kbps will be supported. For ports using the ATC compression algorithm, only the speeds between 7.466 Kbps and 32 Kbps will be supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b5333(40), b7200(54), b7466(56), b8000(60), b8533(64), b9066(68), b9600(72), b10133(76), b10666(80), b11200(84), b11733(88), b12266(92), b12800(96), b13333(100), b13866(104), b14400(108), b14933(112), b15466(116), b16000(120), b16533(124), b17066(128), b17600(132), b18133(136), b18666(140), b19200(144), b19733(148), b20266(152), b20800(156), b21333(160), b21866(164), b22400(168), b22933(172), b23466(176), b24000(180), b24533(184), b25066(188), b25600(192), b26133(196), b26666(200), b27200(204), b27733(208), b28266(212), b28800(216), b29333(220), b29866(224), b30400(228), b30933(232), b31466(236), b32000(240), disabled(65535)  

recfAd10PktBandTable 1.3.6.1.4.1.16.101.1.2.1.11.4
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfAd10PktBandEntry

recfAd10PktBandEntry 1.3.6.1.4.1.16.101.1.2.1.11.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfAd10PktBandEntry  

recfAd10PktBandAddr 1.3.6.1.4.1.16.101.1.2.1.11.4.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ad10PortAddr  

recfAd10PktBandStartMode 1.3.6.1.4.1.16.101.1.2.1.11.4.1.2
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2)  

recfAd10PktBandUpdate 1.3.6.1.4.1.16.101.1.2.1.11.4.1.3
Parameter Type = Internal. If set to resetReq, need to reset the AD-10 packet band.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfAd10PktBandBaudRate 1.3.6.1.4.1.16.101.1.2.1.11.4.1.4
Parameter Type = Intrusive. If recfAd10PktBandDBAMode is enabled, then this attribute is ignored. In this case, the actual rate will be dynamically based on the unused bandwidth of the AD-10 aggregrate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b1200(9), b1334(10), b1600(12), b1867(14), b2000(15), b2134(16), b2400(18), b2667(20), b2800(21), b3200(24), b3600(27), b3734(28), b4000(30), b4267(32), b4667(35), b4800(36), b5334(40), b5600(42), b6000(45), b6400(48), b7200(54), b7467(56), b8000(60), b8400(63), b9334(70), b9600(72), b10667(80), b11200(84), b12000(90), b12800(96), b14000(105), b14400(108), b14934(112), b16000(120), b16800(126), b18000(135), b18667(140), b19200(144), b21334(160), b22400(168), b24000(180), b25200(189), b28000(210), b28800(216), b29867(224), b32000(240), b33600(252), b36000(270), b37334(280), b38400(288), b42000(315), b44800(336), b48000(360), b50400(378), b56000(420), b57600(432), b64000(480), b67200(504), b72000(540), b74667(560), b84000(630), b89600(672), b96000(720), b100800(756), b112000(840), b115200(864), b126000(945), b128000(960)  

recfAd10PktBandDBAMode 1.3.6.1.4.1.16.101.1.2.1.11.4.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

recfAd10TrkGrpTable 1.3.6.1.4.1.16.101.1.2.1.11.5
Trunk group entries in this table will map a single AD-10 trunk group address to multiple AD-10 port addresses. It is intended to provide port contention within a single AD-10 unit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfAd10TrkGrpEntry

recfAd10TrkGrpEntry 1.3.6.1.4.1.16.101.1.2.1.11.5.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfAd10TrkGrpEntry  

recfAd10TrkGrpAddr 1.3.6.1.4.1.16.101.1.2.1.11.5.1.1
Parameter Type = Internal. Address of the AD-10 trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfAd10TrkGrpStartMode 1.3.6.1.4.1.16.101.1.2.1.11.5.1.2
Parameter Type = Immediate. Changes will not affect channels that are already connected. Erase will fail if there are any AD-10 channels connected that are using this trunk group MIB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfAd10TrkGrpAgmPort 1.3.6.1.4.1.16.101.1.2.1.11.5.1.3
Parameter Type = Immediate. Changes will not affect channels that are already connected. Defines the AGM port that this AD-10 trunk group may be connected to. The range of available AD-10 ports is determined by this field, recfAd10TrkGrpLowElement, and recfAd10TrkGrpHighElement.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortAddr  

recfAd10TrkGrpLowElement 1.3.6.1.4.1.16.101.1.2.1.11.5.1.4
Parameter Type = Immediate. Changes will not affect channels that are already connected. The low end of the element range available for use by this AD-10 trunk group on on the AGM port set in recfAd10TrkGrpAgmPort. If the value of this field is greater than recfAd10TrkGrpHighElement, then this trunk group is invalid, and any attempt to connect a channel using this trunk group will fail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..64  

recfAd10TrkGrpHighElement 1.3.6.1.4.1.16.101.1.2.1.11.5.1.5
Parameter Type = Immediate. Changes will not affect channels that are already connected. The high end of the element range available for use by this AD-10 trunk group on on the AGM port set in recfAd10TrkGrpAgmPort. If the value of this field is less than recfAd10TrkGrpLowElement, then this trunk group is invalid, and any attempt to connect a channel using this trunk group will fail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..64  

recfAd10TrkGrpRemoteNodeID 1.3.6.1.4.1.16.101.1.2.1.11.5.1.6
Parameter Type = Immediate. Changes will not affect channels that are already connected. The node that any AD-10 subrate channel using this trunk group will connect to. May be the same as the local node that this AD-10 trunk group is defined on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

recfAd10TrkGrpRemoteAddr 1.3.6.1.4.1.16.101.1.2.1.11.5.1.7
Parameter Type = Immediate. Changes will not affect channels that are already connected. The trunk group used for the remote end of any AD-10 subrate channel using this trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortAddr  

recfAd10TrkGrpPartitionID 1.3.6.1.4.1.16.101.1.2.1.11.5.1.8
Parameter Type = Immediate. Changes will not affect channels that are already connected. The partition ID of this trunk group. Used to enforce security on shared node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfAd10TrkGrpSearchDirection 1.3.6.1.4.1.16.101.1.2.1.11.5.1.9
Parameter Type = Immediate. INTRODUCED 2.0.0 Indicates the search order within the range specified by recfAd10TrkGrpLowElement and recfAd10TrkGrpHighElement attributes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lowHigh(1), highLow(2)  

recfAsmPort 1.3.6.1.4.1.16.101.1.2.1.12
OBJECT IDENTIFIER    

recfAsmX50Table 1.3.6.1.4.1.16.101.1.2.1.12.1
OBJECT IDENTIFIER    

recfAsmX50PortTable 1.3.6.1.4.1.16.101.1.2.1.12.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfAsmX50PortEntry

recfAsmX50PortEntry 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfAsmX50PortEntry  

recfAsmX50PortAddr 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfAsmX50PortStartMode 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.2
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfAsmX50PortUpdate 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfAsmX50PortSpeed 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.4
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER b64000(480)  

recfAsmX50PortProtocol 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER div2(2), div3(3), ad7(7)  

recfAsmX50PortIdlePattern 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

recfAsmX50PortOosTimer 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.7
Parameter Type = Intrusive. Time before the port will go out-of-service. If disabled, port will never go OOS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sec3(3), sec4(4), sec5(5), sec6(6), sec7(7), sec8(8), sec9(9), sec10(10), sec11(11), sec12(12), sec13(13), sec14(14), sec15(15), sec16(16), sec17(17), sec18(18), sec19(19), sec20(20), sec21(21), sec22(22), sec23(23), sec24(24), sec25(25), sec26(26), sec27(27), sec28(28), sec29(29), sec30(30), disabled(255)  

recfAsmX50PortPhasorSize 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.8
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER p4(4), p8(8), p16(16)  

recfAsmX50PortTxHouseKbits 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.9
Parameter Type = Intrusive. The following is the map between bits in the bit map and housekeeping bits. bit 0 (lsb) - 'H' bit 1 - 'G' bit 2 - 'F' bit 3 - 'E' bit 4 - 'D' bit 5 - 'C' bit 6 - 'B' bit 7 - reserved
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

recfAsmX50PortCircuitMap 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.10
Parameter Type = Internal. Each byte indicates the usage of the circuit on the X.50 aggregate. 1 is for defined, and 0xFF is for undefined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(20)  

recfAsmX50PortPartitionID 1.3.6.1.4.1.16.101.1.2.1.12.1.1.1.11
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfAsmX50CkTable 1.3.6.1.4.1.16.101.1.2.1.12.1.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfAsmX50CkEntry

recfAsmX50CkEntry 1.3.6.1.4.1.16.101.1.2.1.12.1.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfAsmX50CkEntry  

recfAsmX50CkAddr 1.3.6.1.4.1.16.101.1.2.1.12.1.2.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsmX50CkAddr  

recfAsmX50CkStartMode 1.3.6.1.4.1.16.101.1.2.1.12.1.2.1.2
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfAsmX50CkUpdate 1.3.6.1.4.1.16.101.1.2.1.12.1.2.1.3
Parameter Type = Internal. If set to resetReq, need to reset the ASM X.50 circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfAsmX50CkSpeed 1.3.6.1.4.1.16.101.1.2.1.12.1.2.1.4
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER s2400(18), s4800(36), s9600(72), s19200(144)  

recfAsmX50CkTimeSlot 1.3.6.1.4.1.16.101.1.2.1.12.1.2.1.5
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ab(81), cd(83), a(41), b(42), c(43), d(44), e(45), a1(1), a2(6), a3(11), a4(16), b1(2), b2(7), b3(12), b4(17), c1(3), c2(8), c3(13), c4(18), d1(4), d2(9), d3(14), d4(19), e1(5), e2(10), e3(15), e4(20)  

recfAsmX50CkPhasorSize 1.3.6.1.4.1.16.101.1.2.1.12.1.2.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER p4(4), p6(6), p8(8), p12(12), p16(16)  

recfAsmX50CkSbitConnectState 1.3.6.1.4.1.16.101.1.2.1.12.1.2.1.7
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), zero(2)  

recfAsmVoice 1.3.6.1.4.1.16.101.1.2.1.12.2
OBJECT IDENTIFIER    

recfAsmVoiceTrkGrpTable 1.3.6.1.4.1.16.101.1.2.1.12.2.1
Trunk group entries in this table will serve as a profile for multiple physical ASM ports. If intended to use as a non-contention system, then this trunk group will represent only one ASM Voice port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfAsmVoiceTrkGrpEntry

recfAsmVoiceTrkGrpEntry 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfAsmVoiceTrkGrpEntry  

recfAsmVoiceTrkGrpAddr 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.1
Parameter Type = Internal. Address of the voice trunk group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfAsmVoiceTrkGrpStartMode 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.2
Parameter Type = Immediate. Changes will not affect channels that are already connected. Erase will fail if there are any voice channels connected that are using this trunk group MIB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfAsmVoiceTrkGrpPort 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.3
Parameter Type = Immediate. Changes will not affect channels that are already connected. Defines the T1M/E1M port that this voice trunk group may be connected to. The range of available bundles is determined by this field, recfAsmVoiceTrkGrpLowElement, and recfAsmVoiceTrkGrpHighElement.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortAddr  

recfAsmVoiceTrkGrpLowElement 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.4
Parameter Type = Immediate. Changes will not affect channels that are already connected. The low end of the element range available for use by this Voice trunk group on on the T1M/E1M port set in recfAsmVoiceTrkGrpPort. If the value of this field is the same as recfAsmVoiceTrkGrpHighElement, then this Voice port is not a contention port. If the value of this field is greater than recfAsmVoiceTrkGrpHighElement, then this trunk group is invalid, and any attempt to connect a channel using this trunk group will fail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

recfAsmVoiceTrkGrpHighElement 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.5
Parameter Type = Immediate. Changes will not affect channels that are already connected. The high end of the element range available for use by this voice trunk group on on the T1M/E1M port set in recfAsmVoiceTrkGrpPort. If the value of this field is the same as recfAsmVoiceTrkGrpLowElement, then this voice port is not a contention port. If the value of this field is less than recfAsmVoiceTrkGrpLowElement, then this trunk group is invalid, and any attempt to connect a channel using this trunk group will fail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

recfAsmVoiceTrkGrpRemoteNodeID 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.6
Parameter Type = Immediate. Changes will not affect channels that are already connected. The node that any voice subrate channel using this trunk group will connect to. May be the same as the local node that this voice trunk group is defined on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NodeAddr  

recfAsmVoiceTrkGrpRemoteAddr 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.7
Parameter Type = Immediate. Changes will not affect channels that are already connected. The trunk group used for the remote end of any voice subrate channel using this trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortAddr  

recfAsmVoiceTrkGrpPartitionID 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.8
Parameter Type = Immediate. Changes will not affect channels that are already connected. The partition ID of this trunk group. Used to enforce security on shared node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfAsmVoiceTrkGrpCompressMode 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.9
Parameter Type = Immediate. Changes will not affect channels that are already connected. Defines which compression algorithm to use for voice channels connected using this voice trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tCelp(1), atc(2), adpcm(3)  

recfAsmVoiceTrkGrpSpeed 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.10
Parameter Type = Immediate. Changes will not affect channels that are already connected. The compressed channel data rate for any voice subrate connections using this voice trunk group. For channels using a CELP compression algorithm, only speeds of 5.333 Kbps, 7.2 Kbps, 8 Kbps, and 9.6 Kbps will be supported. For channels using the ATC compression algorithm, only the speeds between 7.466 Kbps and 32 Kbps will be supported. For channels using the ADPCM compression algorithm, only the speeds 31.733 and 32.000 Kbps will be supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b5333(40), b7200(54), b7466(56), b8000(60), b8533(64), b9066(68), b9600(72), b10133(76), b10666(80), b11200(84), b11733(88), b12266(92), b12800(96), b13333(100), b13866(104), b14400(108), b14933(112), b15466(116), b16000(120), b16533(124), b17066(128), b17600(132), b18133(136), b18666(140), b19200(144), b19733(148), b20266(152), b20800(156), b21333(160), b21866(164), b22400(168), b22933(172), b23466(176), b24000(180), b24533(184), b25066(188), b25600(192), b26133(196), b26666(200), b27200(204), b27733(208), b28266(212), b28800(216), b29333(220), b29866(224), b30400(228), b30933(232), b31466(236), b31733(238), b32000(240), b36000(270)  

recfAsmVoiceTrkGrpSignalingType 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.11
Parameter Type = Immediate. Changes will not affect channels that are already connected. The type of signaling used by the T1M/E1M bundles that connect to voice ports using this trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), a(2), ab(3), abcd(4), ac15-dtmf(8), ac15-dp(9)  

recfAsmVoiceTrkGrpDTMFRelay 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.12
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the DTMF relay on any ASM voice ports that use this trunk group. When enabled, DTMF signals are transferred through the connection. Not applicable in ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

recfAsmVoiceTrkGrpFaxRelay 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.13
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the fax relay on any ASM voice ports that use this trunk group. When enabled, fax operation will be supported over the connection. Not applicable in ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

recfAsmVoiceTrkGrpFaxNSFMode 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.14
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the non-standard fax mode on any ASM voice ports that use this trunk group. Not applicable in ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

recfAsmVoiceTrkGrpTxAudSrcMode 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.15
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the transmit audio source on any ASM voice ports that use this trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), silence(2), toneDMW(3)  

recfAsmVoiceTrkGrpRxAudOutMode 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.16
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the receive audio output on any ASM voice ports that use this trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), silence(2), toneDMW(3)  

recfAsmVoiceTrkGrpEchoCancel 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.17
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the echo cancellation on any ASM voice ports that use this trunk group. Not applicable in ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

recfAsmVoiceTrkGrpNonLinear 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.18
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the non-linear processing inside the echo canceller on any ASM voice ports that use this trunk group. Not applicable in ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

recfAsmVoiceTrkGrpDataMode 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.19
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the 2100 Hz detection logic and data mode operation with the ATC vocoder on any ASM Voice ports that use this trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

recfAsmVoiceTrkGrpTxPCMGain 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.20
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the transmit PCM gain on any ASM voice ports that use this trunk group. Range is defined from -33.0 dB to +18.0 dB with .2 dB increments. Default is 0 dB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

recfAsmVoiceTrkGrpRxPCMGain 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.21
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the receive PCM gain on any ASM voice ports that use this trunk group. Range is defined from -33.0 dB to +18.0 dB with .2 dB increments. Default is 0 dB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

recfAsmVoiceTrkGrpVocoderEnable 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.22
Parameter Type = Immediate. Changes will not affect channels that are already connected. Controls the vocoder mode on any ASM voice ports that use this trunk group. Not applicable in ADPCM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), disable(2)  

recfAsmVoiceTrkGrpSigIdlePttrn 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.23
Parameter Type = Immediate. Changes will not affect channels that are already connected. Defines the idle signaling pattern on any ASM voice ports that use this trunk group. This pattern is delivered to receive signal channel connections at times prior to the availability of a verified reliable signal channel source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a0-b0-c0-d0(16), a0-b0-c0-d1(8), a0-b0-c1-d0(4), a0-b0-c1-d1(12), a0-b1-c0-d0(2), a0-b1-c0-d1(10), a0-b1-c1-d0(6), a0-b1-c1-d1(14), a1-b0-c0-d0(1), a1-b0-c0-d1(9), a1-b0-c1-d0(5), a1-b0-c1-d1(13), a1-b1-c0-d0(3), a1-b1-c0-d1(11), a1-b1-c1-d0(7), a1-b1-c1-d1(15)  

recfAsmVoiceTrkGrpPCMPhasorSize 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.24
Parameter Type = Immediate. Changes will not affect channels that are already connected. Size of the phasor (in bytes) on the PCM (64K) side of any ASM voice port using this trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4..255  

recfAsmVoiceTrkGrpSubratePhSize 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.25
Parameter Type = Immediate. Changes will not affect channels that are already connected. Size of the phasor (in bytes) on the subrate side of any ASM voice port using this trunk group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4..100  

recfAsmVoiceTrkGrpLocalSigConf 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.26
Parameter Type = Immediate. Changes will not affect channels that are already connected. AD-10 and ASM signalling incompatibility parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fxs-ard(2), fxo(3), fxs-or-em(4)  

recfAsmVoiceTrkGrpRemoteSigConf 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.27
Parameter Type = Immediate. Changes will not affect channels that are already connected. AD-10 and ASM signalling incompatibility parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), ad10Fxs(2), ad10Fxo(3), ad10Em(4)  

recfAsmVoiceTrkGrpRmtSigPattern 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.28
Parameter Type = Immediate. Changes will not affect channels that are already connected. Defines the remote signaling pattern on any ASM voice ports that use this trunk group. This pattern is delivered to receive signal channel connections at times prior to the availability of a verified reliable signal channel source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a0-b0-c0-d0(16), a0-b0-c0-d1(8), a0-b0-c1-d0(4), a0-b0-c1-d1(12), a0-b1-c0-d0(2), a0-b1-c0-d1(10), a0-b1-c1-d0(6), a0-b1-c1-d1(14), a1-b0-c0-d0(1), a1-b0-c0-d1(9), a1-b0-c1-d0(5), a1-b0-c1-d1(13), a1-b1-c0-d0(3), a1-b1-c0-d1(11), a1-b1-c1-d0(7), a1-b1-c1-d1(15)  

recfAsmVoiceTrkGrpCelpNetSigMd 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.29
Parameter Type = Immediate. INTRODUCED 2.0.0 Enable autodetection of CELP/ATC channel connected equipment so as to automatically change format to become compatible with either LINK (5 byte) or ST (8 byte) channel modes. Alternately, this parameter hard sets CELP/ATC channels to be compatible only with either LINK or ST mode compatible equipment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), st(2), link(3)  

recfAsmVoiceTrkGrpSearchDir 1.3.6.1.4.1.16.101.1.2.1.12.2.1.1.30
Parameter Type = Immediate. INTRODUCED 2.0.0 Indicates the search order within the range specified by recfAsmVoiceTrkGrpLowElement and recfAsmVoiceTrkGrpHighElement attributes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lowHigh(1), highLow(2)  

recfRtmPort 1.3.6.1.4.1.16.101.1.2.1.13
OBJECT IDENTIFIER    

recfRtmPortTable 1.3.6.1.4.1.16.101.1.2.1.13.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfRtmPortEntry

recfRtmPortEntry 1.3.6.1.4.1.16.101.1.2.1.13.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfRtmPortEntry  

recfRtmPortAddr 1.3.6.1.4.1.16.101.1.2.1.13.1.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfRtmPortStartMode 1.3.6.1.4.1.16.101.1.2.1.13.1.1.2
Parameter Type = Intrusive. Erase will reset all parameters to their default values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfRtmPortUpdate 1.3.6.1.4.1.16.101.1.2.1.13.1.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfRtmPortType 1.3.6.1.4.1.16.101.1.2.1.13.1.1.4
Parameter Type = Intrusive. Setting AD-3 or AD-7 will allocate all of the access device ports with their default parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER null(1), ad3(2), ad7(3)  

recfRtmPortPartitionID 1.3.6.1.4.1.16.101.1.2.1.13.1.1.5
Parameter Type = Intrusive. Default value is the partition ID of the node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfRtmAdPortTable 1.3.6.1.4.1.16.101.1.2.1.13.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfRtmAdPortEntry

recfRtmAdPortEntry 1.3.6.1.4.1.16.101.1.2.1.13.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfRtmAdPortEntry  

recfRtmAdPortAddr 1.3.6.1.4.1.16.101.1.2.1.13.2.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RtmAdPortAddr  

recfRtmAdPortStartMode 1.3.6.1.4.1.16.101.1.2.1.13.2.1.2
Parameter Type = Intrusive. Erase will reset all parameters to their default values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfRtmAdPortUpdate 1.3.6.1.4.1.16.101.1.2.1.13.2.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetReq(3)  

recfRtmAdPortSpeed 1.3.6.1.4.1.16.101.1.2.1.13.2.1.4
Parameter Type = Intrusive. If the speed is set to s56000 and recfRtmAdPortDataBits attribute set to b7, the channel will be transported as a 64000 bit stuffed channel. If the speed is set to s56000 and recfRtmAdPortDataBits attribute set to b8, the channel will be a subrate channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER s150(2), s300(3), s1200(9), s2400(18), s4800(36), s8000(60), s9600(72), s14400(108), s19200(144), s32000(240), s38400(288), s48000(360), s56000(420), s64000(480), s128000(960)  

recfRtmAdPortDataBits 1.3.6.1.4.1.16.101.1.2.1.13.2.1.5
Parameter Type = Intrusive. Value b7 cannot be used in subrate connections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b7(1), b8(2)  

recfRtmAdPortCommMode 1.3.6.1.4.1.16.101.1.2.1.13.2.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sync(1), async(2)  

recfRtmAdPortType 1.3.6.1.4.1.16.101.1.2.1.13.2.1.7
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER null(1), io(2), bandContent(3)  

recfLgmPort 1.3.6.1.4.1.16.101.1.2.1.14
OBJECT IDENTIFIER    

recfLgmPortTable 1.3.6.1.4.1.16.101.1.2.1.14.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfLgmPortEntry

recfLgmPortEntry 1.3.6.1.4.1.16.101.1.2.1.14.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfLgmPortEntry  

recfLgmPortAddr 1.3.6.1.4.1.16.101.1.2.1.14.1.1.1
Parameter Type = Internal. This is a virtual port address in type:group:port format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfLgmPortStartMode 1.3.6.1.4.1.16.101.1.2.1.14.1.1.2
Parameter Type = Intrusive. Setting to erase will fail if the LGM port has any non-removed channels. If successful, returns the initial port configuration (with its default values) and erases any channels defined on this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfLgmPortUpdate 1.3.6.1.4.1.16.101.1.2.1.14.1.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateReq(2), resetReq(3)  

recfLgmPortArq 1.3.6.1.4.1.16.101.1.2.1.14.1.1.4
Parameter Type = Intrusive. Specifies ARQ speed. Unit of bps, i which may not exceed the 9600.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER s3200(1), s6400(2), s9600(3)  

recfLgmPortGroup 1.3.6.1.4.1.16.101.1.2.1.14.1.1.5
Parameter Type = Non-intrusive. Intended to force channels to use specific groups of LGM ports. There can be up to seven groups for each LGM port. Bit map bits 1 (lsb) to 7 indicates i the group(s) of the LGM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

recfLgmPortEncryption 1.3.6.1.4.1.16.101.1.2.1.14.1.1.6
Parameter Type = Non-intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), encrypted(2)  

recfLgmPortSatelliteHop 1.3.6.1.4.1.16.101.1.2.1.14.1.1.7
Parameter Type = Non-intrusive. Specifies the number of satellite hops per end - to - end point connection. Earth station - satellite - earth station connection represents one hop.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

recfLgmPortSyncChar 1.3.6.1.4.1.16.101.1.2.1.14.1.1.8
Parameter Type = Intrusive. Specifies number of sync characters per frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER syncChar4(4), syncChar8(8)  

recfLgmPortSyncLevel 1.3.6.1.4.1.16.101.1.2.1.14.1.1.9
Parameter Type = Intrusive. Synchronization level parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER level1(1), level2(2)  

recfLgmPortOosTimer 1.3.6.1.4.1.16.101.1.2.1.14.1.1.10
Parameter Type = Non-intrusive. In units of seconds. The Out-Of-Service state is entered if this time is exceeded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..300  

recfLgmPortPartitionID 1.3.6.1.4.1.16.101.1.2.1.14.1.1.11
Parameter Type = Intrusive. Used by security server to enforce shared node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfLgmPortBitMode 1.3.6.1.4.1.16.101.1.2.1.14.1.1.12
Parameter Type = Intrusive. Defines the bit mode of this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b7Bit(1), b8Bit(2)  

recfLgmPortInbandSuperrate 1.3.6.1.4.1.16.101.1.2.1.14.1.1.13
Parameter Type = Non-intrusive. Specifies how the signaling function transport for inband superrate is handled. - reject a channel connection with a NO BANDWIDTH response, so an alternative LINK path may be found. - sets all the functions active. - passes the functions the way they are set (slower than LINK).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nack(1), forceActive(2), pass(3)  

recfLgmPortInbandSubrate 1.3.6.1.4.1.16.101.1.2.1.14.1.1.14
Parameter Type = Non-intrusive. Specifies how the signaling function transport for inband subrate is handled. - reject a channel connection with a NO BANDWIDTH response, so an alternative LINK path may be found. - passes the functions the way they are set (slower than LINK).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nack(1), pass(3)  

recfLgmPortOutbandSuperrate 1.3.6.1.4.1.16.101.1.2.1.14.1.1.15
Parameter Type = Non-intrusive. Specifies how the signaling function transport for outband superrate is handled. - reject a channel connection with a NO BANDWIDTH response, so an alternative LINK path may be found. - sets all the functions active. - passes the functions the way they are set (slower than LINK).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nack(1), forceActive(2), pass(3)  

recfLgmPortOutbandSubrate 1.3.6.1.4.1.16.101.1.2.1.14.1.1.16
Parameter Type = Non-intrusive. Specifies how the signaling function transport for outband subrate is handled. - reject a channel connection with a NO BANDWIDTH response, so an alternative LINK path may be found. - passes the functions the way they are set (slower than LINK).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nack(1), pass(3)  

recfDsmPort 1.3.6.1.4.1.16.101.1.2.1.15
OBJECT IDENTIFIER    

recfDsmIDCPortTable 1.3.6.1.4.1.16.101.1.2.1.15.1
This section of the MIB is not changeable. It is included so that the user can verify the existance of PVC port. The user can configure frame relay channels on these ports by using the recfFrChannelEntry section of the MIB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfDsmIDCPortEntry

recfDsmIDCPortEntry 1.3.6.1.4.1.16.101.1.2.1.15.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfDsmIDCPortEntry  

recfDsmIDCPortAddr 1.3.6.1.4.1.16.101.1.2.1.15.1.1.1
Parameter Type = Internal. Port address format is nest.slot.65.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfDsmDChPort 1.3.6.1.4.1.16.101.1.2.1.15.2
OBJECT IDENTIFIER    

recfDsmDChPortTable 1.3.6.1.4.1.16.101.1.2.1.15.2.1
This MIB section is used to configure D-channel virtual ports. The user can configure TDM channels on these ports in the recfTDMChannelEntry section of the MIB. These TDM channels can connect at a rate of 64 kbps to a T1M or E1M common-channel signaling bundle.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfDsmDChPortEntry

recfDsmDChPortEntry 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfDsmDChPortEntry  

recfDsmDChPortAddr 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.1
Parameter Type = Internal. Port address format is type.group.port. The server type is 131.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfDsmDChPortStartMode 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.2
Parameter Type = Intrusive. If set to off, then the D-channel cannot be connected. In order to set to erase, the D-channel must be disconnected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfDsmDChPortUpdate 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.3
Parameter Type = Internal. If set to resetReq, then the user must reset the port (which involves disconnecting and reconnecting the D-channel) in order for the parameter changes to take effect. If set to updateReq, then the user can update the port without affecting the D-channel connection in order for the parameter changes to take effect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), updateReq(2), resetReq(3)  

recfDsmDChPortPartitionID 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.4
Parameter Type = Intrusive. Used for security on shared nodes. The default value is the partition ID of the node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

recfDsmDChPortPbxProtocol 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.5
Parameter Type = Intrusive. Protocol used by the PBX using this D-channel. If the protocol type does not match the PBX protocol, then the port will not be able to come up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dpnss(1), qsig(2)  

recfDsmDChPortPbxLayer3Type 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.6
Parameter Type = Intrusive. This parameter indicates whether the PBX or the DSM will be responsible for serving B-channels requests (layer 3 master or slave mode). If set to master DSM controls the assignment of B-channels. Otherwise the PBX controls it. To function properly, the DSM and PBX should be configured as different types.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

recfDsmDChPortPbxLayer2Type 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.7
Parameter Type = Intrusive. This parameter is independent of layer 3 master or slave mode. To function properly, the DSM and PBX should be configured as different types.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

recfDsmDChPortSharedZeroFlag 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.8
Parameter Type = Intrusive. Indicates whether the zero bit of a frame's end flag can be combined with the zero bit of the next frame's start flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

recfDsmDChPortEncodingType 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.9
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nrz(1), nrzb(2), nrzi-space(4), nrzi-mark(3)  

recfDsmDChPortActiveLev1CDRMode 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.10
Parameter Type = Non-intrusive. Specifies whether level 1 Call Detail Records for the calls in progress are to be collected for this D-channel. Changing this parameter will not disrupt any port operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfDsmDChPortRecordLev1CDRMode 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.11
Parameter Type = Non-intrusive. Specifies whether level 1 Call Detail Records for the completed calls are to be collected for this D-channel. Changing this parameter will not disrupt any port operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfDsmDChPortActiveLev2CDRMode 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.12
Parameter Type = Non-intrusive. Specifies whether level 2 Call Detail Records for the calls in progress are to be collected for this D-channel. Changing this parameter will not disrupt any port operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfDsmDChPortRecordLev2CDRMode 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.13
Parameter Type = Non-intrusive. Specifies whether level 2 Call Detail Records for the completed calls are to be collected for this D-channel. Changing this parameter will not disrupt any port operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

recfDsmDChPortCallsPerSecond 1.3.6.1.4.1.16.101.1.2.1.15.2.1.1.14
Parameter Type = Intrusive. This attribute is an estimate of the number of calls per second (in units of 0.01 calls per second) on this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1000  

recfDsmDChBChTable 1.3.6.1.4.1.16.101.1.2.1.15.2.2
This MIB section is used to configure information about B-channels that are associated with the D-channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfDsmDChBChEntry

recfDsmDChBChEntry 1.3.6.1.4.1.16.101.1.2.1.15.2.2.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfDsmDChBChEntry  

recfDsmDChBChAddr 1.3.6.1.4.1.16.101.1.2.1.15.2.2.1.1
Parameter Type = Internal. Port address of associated D-channel port. The format is type.group.port. The server type is 131.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfDsmDChBChBundle 1.3.6.1.4.1.16.101.1.2.1.15.2.2.1.2
Parameter Type = Internal. Identifies the bundle which is associated with this D-channel port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..31  

recfDsmDChBChDirection 1.3.6.1.4.1.16.101.1.2.1.15.2.2.1.3
Parameter Type = Non-intrusive. Specifies the direction of the calls on this B-channel. The values are: - outgoing: allows calls originating on PBX to ST - incoming: allows calls originating on ST to PBX - bidirectional: allows calls in any direction - none: this B-channel is not allowed for use. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outgoing(1), incoming(2), bidirectional(3), none(255)  

recfDsmDChExchTable 1.3.6.1.4.1.16.101.1.2.1.15.2.3
This MIB section is used to assign up to 16 exchange codes to a D-channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfDsmDChExchEntry

recfDsmDChExchEntry 1.3.6.1.4.1.16.101.1.2.1.15.2.3.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfDsmDChExchEntry  

recfDsmDChExchDChAddr 1.3.6.1.4.1.16.101.1.2.1.15.2.3.1.1
Parameter Type = Internal. D-channel port address. The format is type.group.port. The server type is 131.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfDsmDChExchIndex 1.3.6.1.4.1.16.101.1.2.1.15.2.3.1.2
Parameter Type = Internal. Indexing the exchange code within this D-channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

recfDsmDChExchControlMode 1.3.6.1.4.1.16.101.1.2.1.15.2.3.1.3
Parameter Type = Non-intrusive. Indicates whether this exchange code may be used to make a call. The value erase is used to wipe out the existing exchange code. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

recfDsmDChExchCode 1.3.6.1.4.1.16.101.1.2.1.15.2.3.1.4
Parameter Type = Non-intrusive. The valid characters are 0 - 9. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

recfDsmDChQOSTable 1.3.6.1.4.1.16.101.1.2.1.15.2.4
This MIB section specifies the source node quality of service resolution entry that is to be used for the channel connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfDsmDChQOSEntry

recfDsmDChQOSEntry 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfDsmDChQOSEntry  

recfDsmDChQOSDChAddr 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.1
Parameter Type = Internal. Address of D-channel, for which this entry is being used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfDsmDChQOSIndex 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.2
Parameter Type = Internal. Index of the quality of service entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

recfDsmDChQOSControlMode 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.3
Parameter Type = Non-intrusive. Changes will not affect channels that are already connected. Disable will prevent this quality of service entry from being applied to the new voice connections. Erase will remove this quality of service entry from the table. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), erase(3)  

recfDsmDChQOSLowBChan 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.4
Parameter Type = Non-intrusive. The low end of the source bundle range available for use by this D-channel. If this attribute is set to 0, then the used value is set to lowest valid number. The range is invalid if this attribute is set to the value greater than recfDsmDChQOSHighBChan. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

recfDsmDChQOSHighBChan 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.5
Parameter Type = Non-intrusive. The high end of the source bundle range available for use by this D-channel. If this attribute is set to 0, then the used value is set to highest valid number. The range is invalid if this attribute is not 0 and set to the value less than recfDsmDChQOSLowBChan. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

recfDsmDChQOSLowExchCode 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.6
Parameter Type = Non-intrusive. The valid characters are 0 - 9. The low end of the destination exchange codes range. The comparison type used is based upon the ASCII codes for the character string. Thus, for example, '5545' is less than '555'. If this attribute is set to an empty string, then the lowest valid value is used. The range is invalid if the value of this attribute is greater than recfDsmDChQOSHighExchCode. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

recfDsmDChQOSHighExchCode 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.7
Parameter Type = Non-intrusive. The valid characters are 0 - 9. The high end of the destination exchange codes range. The comparison type used is based upon the ASCII codes for the character string. Thus, for example, '5545' is less than '555'. If this attribute is set to an empty string, then the highest valid value is used. The range is invalid if the value of this attribute is not an empty string and less than recfDsmDChQOSLowExchCode. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

recfDsmDChQOSCallType 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.8
Parameter Type = Non-intrusive. This attribute specifies the call type. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER voice(1), data(2)  

recfDsmDChQOSChPrfIndex 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.9
Parameter Type = Non-intrusive. This attribute specifies the channel profile table index that is defined in the channel profile MIB section on the source node. Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQOSSpecialPrfIndex 1.3.6.1.4.1.16.101.1.2.1.15.2.4.1.10
Parameter Type = Non-intrusive. This attribute specifies the special profile table index that is defined in the applicable profile MIB section on the source node (for example if the attribute recfDsmDChQOSCallType is set to voice, then the special profile table will be the scVoicePrf table). Changes to this field will be reflected in recfDsmDChPortUpdate. A port update will be required in order for the change to take effect. It will not disrupt any channel connections associated with this D-channel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChDPNSSTable 1.3.6.1.4.1.16.101.1.2.1.15.2.5
This MIB section is used to configure D-channel DPNSS protocol related attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfDsmDChDPNSSEntry

recfDsmDChDPNSSEntry 1.3.6.1.4.1.16.101.1.2.1.15.2.5.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfDsmDChDPNSSEntry  

recfDsmDChDPNSSAddr 1.3.6.1.4.1.16.101.1.2.1.15.2.5.1.1
Parameter Type = Internal. D-channel port address. Format is type.group.port. The server type is 131.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfDsmDChDPNSSNL 1.3.6.1.4.1.16.101.1.2.1.15.2.5.1.2
Parameter Type = Intrusive. The minimum number of retransmissions of a command frame if no acknowledge received. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChDPNSSNT1 1.3.6.1.4.1.16.101.1.2.1.15.2.5.1.3
Parameter Type = Intrusive. Duration for which retransmission is done (in units of 10 milliseconds). Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChDPNSSNT2 1.3.6.1.4.1.16.101.1.2.1.15.2.5.1.4
Parameter Type = Intrusive. Post retransmission acknowledge delay. In other words, this is an additional time after recfDsmDChDPNSSNL and recfDsmDChDPNSSNT1 expiration, before layer 2 informs layer 3 of a failure (in units of 10 milliseconds). If the PBX and DSM connected through a satellite, this attribute should be set to 52. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

recfDsmDChDPNSSUnrecMsgIdle 1.3.6.1.4.1.16.101.1.2.1.15.2.5.1.5
Parameter Type = Intrusive. If DSM has received unrecognized local PBX message, this setting specifies the idle time whithin which there will not be any outgoing calls attempted (in units of 1 second). Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChDPNSSInterDgtTmr 1.3.6.1.4.1.16.101.1.2.1.15.2.5.1.6
Parameter Type = Intrusive. Specifies the maximum time between PBX service request messages used to set up a call (in units of 1 second). If this time is exceeded call is cleared. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigTable 1.3.6.1.4.1.16.101.1.2.1.15.2.6
This MIB section is used to configure D-channel QSig protocol related attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfDsmDChQSigEntry

recfDsmDChQSigEntry 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfDsmDChQSigEntry  

recfDsmDChQSigAddr 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.1
Parameter Type = Internal. D-channel port address. Format is type.group.port. The server type is 131.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

recfDsmDChQSigK 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.2
Parameter Type = Intrusive. Maximum number of outstanding (unacknowledged) I-frames. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

recfDsmDChQSigN200 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.3
Parameter Type = Intrusive. Maximum number of frame retransmissions. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT200 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.4
Parameter Type = Intrusive. Maximum time (in units of 1 second) before frame retransmission is initiated. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT203 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.5
Parameter Type = Intrusive. Maximum time (in units of 1 second) allowed on layer 2 without frame exchange. If no frame is sent during this time, then layer 2 monitoring frame is sent. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT302 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.6
Parameter Type = Intrusive. Maximum time between PBX service request messages used to set up a call (in units of 1 second). If this time is exceeded then the call is cleared. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT303 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.7
Parameter Type = Intrusive. SETUP message maximum response time (in units of 1 second). If exceeded, the SETUP messge will be sent once more. If there is still no response during this period of time, then the call is cleared. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT304 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.8
Parameter Type = Intrusive. Maximum time (in units of 1 second) after receipt of SETUP ACK before one of the following messages is received: CALL PROCEEDING, ALERTING, CONNECT or DISCONNECT If while waiting DSM sends any message to PBX, the timer should be restarted. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT305 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.9
Parameter Type = Intrusive. Maximum time (in units of 1 second) for DISCONNECT message response. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT308 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.10
Parameter Type = Intrusive. Maximum time (in units of 1 second) for RELEASE message response. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT309 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.11
Parameter Type = Intrusive. Maximum time (in units of 1 second) allowed to restore connection upon detection of a failure. If expired, both the connection and call are cleared. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT314 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.12
Parameter Type = Intrusive. Maximum time (in units of 1 second) allowed to receive all of the segments of a message. This parameter applies only to segmented messages. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT316 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.13
Parameter Type = Intrusive. Maximum time (in units of 1 second) for RESTART message response. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfDsmDChQSigT322 1.3.6.1.4.1.16.101.1.2.1.15.2.6.1.14
Parameter Type = Intrusive. Maximum time (in units of 1 second) for STATUS INQUIRY message. Changes to this field will be reflected in recfDsmDChPortUpdate. A port reset will be required in order for the change to take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

recfTranslation 1.3.6.1.4.1.16.101.1.2.1.16
OBJECT IDENTIFIER    

recfLink2TraTable 1.3.6.1.4.1.16.101.1.2.1.16.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfLink2TraEntry

recfLink2TraEntry 1.3.6.1.4.1.16.101.1.2.1.16.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfLink2TraEntry  

recfLink2TraIndex 1.3.6.1.4.1.16.101.1.2.1.16.1.1.1
Parameter Type = Internal. Translation table index, notated in Link-2 specific notation. Does not indicate any particular addresses, however must be set to the same value on both, Link-2 and ST-50 nodes. It is a link logical entity pointing to the translation table entry containing both, Link-2 and ST-50 physical addresses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Link2Index  

recfLink2TraStartMode 1.3.6.1.4.1.16.101.1.2.1.16.1.1.2
Parameter Type = Immediate. Setting to off will prevent this table entry from being used on connection (invalidates it). Setting to erase will free the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), off(2), erase(3)  

recfLink2TraStAddr 1.3.6.1.4.1.16.101.1.2.1.16.1.1.3
Parameter Type = Immediate. Represents local ST-50 TDM channel Link2 channel (defined by recfLink2TraL2Addr attribute) is connected to. Used by ST-50 as a connection end point address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

recfLink2TraL2Addr 1.3.6.1.4.1.16.101.1.2.1.16.1.1.4
Parameter Type = Immediate. Represents Link2 address in Link2 network ST-50 TDM channel (defined by recfLink2TraStAddr attribute) is connected to. If this attribute has [:xch] part not equal zero, then it represents X50 subrate address, otherwise it is a regular address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link2Addr  

recfLink2TraFunctions 1.3.6.1.4.1.16.101.1.2.1.16.1.1.5
Parameter Type = Immediate. Selects the mode of functions exchange. In inBand mode the same time slot as data is being used. In outBand it is a separate channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), inBand(2), outBand(3)  

recfLink2TraPartition 1.3.6.1.4.1.16.101.1.2.1.16.1.1.6
Parameter Type = Internal. Displays the partition assigned to this translation table entry. This partition is inherited from the TDM channel associated with this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

recfHwRsc 1.3.6.1.4.1.16.101.1.2.1.17
OBJECT IDENTIFIER    

recfHwRscEngineTable 1.3.6.1.4.1.16.101.1.2.1.17.1
This MIB section is used for configuration of on-board engines on a module in an ST node. The engine configuration will be set up with default values when the module is configured in the recfSlotTable MIB. It will be erased when the module is erased from the recfSlotTable MIB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RecfHwRscEngineEntry

recfHwRscEngineEntry 1.3.6.1.4.1.16.101.1.2.1.17.1.1
INTRODUCED 2.0.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RecfHwRscEngineEntry  

recfHwRscEngineModuleAddr 1.3.6.1.4.1.16.101.1.2.1.17.1.1.1
The address of the module that this engine is located on. Format is ..
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

recfHwRscEngineID 1.3.6.1.4.1.16.101.1.2.1.17.1.1.2
The engine ID on the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

recfHwRscEngineStartMode 1.3.6.1.4.1.16.101.1.2.1.17.1.1.3
Parameter Type = Intrusive. Controls whether the engine should start as inserted or removed when the module comes up. If the value is set to automatic, then the engine will start as inserted. Otherwise, it will start as removed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(1), offline(2)  

recfHwRscEngineUpdate 1.3.6.1.4.1.16.101.1.2.1.17.1.1.4
Indicates if the current settings in the engine configuration MIB represent the active settings on the module or not. If this value is resetRequired, then an engine reset command is required for the current configuration to take effect. This is done by setting the MIB attribute restHwRscEngineDiagnostics to reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), resetRequired(3)  

recfHwRscEngineApplication 1.3.6.1.4.1.16.101.1.2.1.17.1.1.5
Parameter Type = Intrusive. Used to reserve an engine for a specific application type. If no application type reservation is desired, then the value any should be used. If the application type specified is not supported for the module that the engine is located on, then the engine will not be able to be used for any applications. In this event, the module will generate an engine failure alarm to indicate a bad configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x50(1), celp-atc(2), adpcm(3), link(4), any(255)  

recfHwRscEnginePartitionID 1.3.6.1.4.1.16.101.1.2.1.17.1.1.6
Parameter Type = Intrusive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

restNode 1.3.6.1.4.1.16.101.1.2.2.1
OBJECT IDENTIFIER    

restNodeEntry 1.3.6.1.4.1.16.101.1.2.2.1.1
OBJECT IDENTIFIER    

restNodeDiagnostics 1.3.6.1.4.1.16.101.1.2.2.1.1.1
updateNest will update the node with the new nest number. If the new nest number is greater than the old number, then the new nests will be added, and any modules in those nests will be able to start running. If the new nest number is less than the old nest number, then the old nests and any modules in them will be removed. updateClockTable will update the clock fallback list. This will not affect the currently running clock, but will take affect when the current clock fails. The selectClock commands will force the specified clock to go active. It does not load the MIB configuration settings, but instead uses the current clock fallback list.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER updateNest(7), updateClockTable(10), selectClock1(21), selectClock2(22), selectClock3(23), selectClock4(24), selectClock5(25), selectClock6(26), selectClock7(27), selectClock8(28), enableTestGenLocal(11), enableTestGenRemote(12), disableTestGen(13), turnOnMajorAlarmRly(17), turnOffMajorAlarmRly(18), turnOnMinorAlarmRly(108), turnOffMinorAlarmRly(109), clearNcpBgDiagResults(122), clearNcpStartupDiagResults(123)  

restNodeStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initializing(49), online(48), fail(43)  

restNodeCondition 1.3.6.1.4.1.16.101.1.2.2.1.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(57), exception(52)  

restNodeSWRevision 1.3.6.1.4.1.16.101.1.2.2.1.1.4
Version number of the NCP software that is currently running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

restNodeMIBRevision 1.3.6.1.4.1.16.101.1.2.2.1.1.5
Version number of the MIB schema that the NCP is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

restNodeUpTime 1.3.6.1.4.1.16.101.1.2.2.1.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restNodeErrorMinutes 1.3.6.1.4.1.16.101.1.2.2.1.1.7
Count of the error minutes in the bus for the past 24 hours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1440  

restNodeNumOfNest 1.3.6.1.4.1.16.101.1.2.2.1.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

restNodePktBandBWAvail 1.3.6.1.4.1.16.101.1.2.2.1.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restNodePktBandBWMax 1.3.6.1.4.1.16.101.1.2.2.1.1.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restNodeMasterClockPriority 1.3.6.1.4.1.16.101.1.2.2.1.1.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master1(1), master2(2), master3(3), master4(4), master5(5), master6(6), master7(7), master8(8), master9(9), master10(10), master11(11), master12(12), master13(13), master14(14), master15(15), master16(16), slave(17)  

restNodeMasterClockMsg 1.3.6.1.4.1.16.101.1.2.2.1.1.12
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER asertingMasterMode(1), defaultInternal(2), unavailable(3)  

restNodeClockTableIndex 1.3.6.1.4.1.16.101.1.2.2.1.1.13
Indicates which clock in the clock fallback table is in use. If the clock status is slave holdover, then this field may return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..8  

restNodeClockStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.14
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(3), lockedStable(4), locking(5), relocking(9), slaveHoldover(15), waitInternal(11), hardwareCheck(14), startup(16), defaultIntOsc(17)  

restNodeClockSubStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.15
These are the substates associated with slaveHoldover state. If the clock status is not slaveHoldover, then notApplicable will be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER checkQualifier(1), delayFallback(2), preQualifyClock(6), qualifyInvalid(7), qualifyValid(8), requalifying(10), waitInvalid(12), waitQualify(13), notApplicable(255)  

restNodeClockSourceType 1.3.6.1.4.1.16.101.1.2.2.1.1.16
Type of the clock currently in use. If the clock status is slave holdover, then this field may return not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), station1(2), station2(3), portRxInd(4), portRxDep(5), portTx(6), notApplicable(255)  

restNodeClockSourcePort 1.3.6.1.4.1.16.101.1.2.2.1.1.17
Source port address of the clock currently in use, if the clock type is portRxInd, portRxDep, or portTx. If the clock type is a different value, then this field will be zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restNodeClockSourcePriority 1.3.6.1.4.1.16.101.1.2.2.1.1.18
Priority of the clock currently in use. If the clock status is slave holdover, then this field may return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..8  

restNodeClockSourceQuality 1.3.6.1.4.1.16.101.1.2.2.1.1.19
Quality of the clock currently in use. If the clock status is slave holdover, then this field may return not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER high(1), low(2), notApplicable(255)  

restNodeClockQualifierStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.20
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER good(57), error(58)  

restNodeTestGenStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.21
Current status of the test generator for TDM nDS0 channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(36), good(57), error(58)  

restNodeTestGenType 1.3.6.1.4.1.16.101.1.2.2.1.1.22
Current type of the test generator for TDM nDS0 channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), local(2), remote(3)  

restNodeTestGenTDMChannel 1.3.6.1.4.1.16.101.1.2.2.1.1.23
Current channel address that the TDM test generator is being used on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ChannelAddr  

restNodeAlarmRelayStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.24
Indicates whether the alarm relay port is programmed to be used or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

restNodeAlarmRelaySubStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.25
Indicates the status of the major alarm relay (first value) and the minor alarm relay (second value). This field is only valid if the alarm relay is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER onOn(48), onOff(106), offOn(40), offOff(107)  

restNodeCpiStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.26
Indicates the current status of the CPI port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), inSession(2)  

restNodeModemStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.27
Indicates the current status of the modem port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), inCpsSession(2), inEmsSession(3)  

restNodeSoftloadStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.28
Indicates the softload status. 'Idle' means that no softload has been run yet since the node went online. 'Softloading' indicates that a download is underway from an SNMS, CPS, or another node. 'Copy to standby NCP' means that a file is being transferred from the active NCP to the standby NCP. 'Copy to module' means that a file that is not stored on the NCP is being transferred to the module that is responsible for storing the file (for example, with AD-10 code, the file will be copied to the SGM/AG module that the AD-10 is connected to). 'Copy to online' means that a file is being transferred from the flash recovery area to its proper location in flash. 'Success' indicates that a download completed with no errors. The remaining values are used to indicate the different errors that can occur during a softload.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(36), softloading(66), copyToStandbyNcp(124), copyToModule(128), copyToOnline(131), success(65), notMatchModuleType(45), unknownModuleType(80), outOfFlash(81), flashWriteError(82), crcError(83), comError(84), invalidNodeID(85), fileNameNotExist(67), cannotComWithServer(101), invalidIPaddress(102), invalidFileNameExt(103), cannotComWithStandby(104), standbyCrcError(105), maxSessionsInProgress(126), loadingInProgress(127), destSlotBusy(129), invalidDestSlot(130), miscFailure(43)  

restNodeSoftloadTotal 1.3.6.1.4.1.16.101.1.2.2.1.1.29
Total number of bytes to be softloaded. If no softloading is in progress, then this value is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restNodeSoftloadSize 1.3.6.1.4.1.16.101.1.2.2.1.1.30
Number of bytes that have been softloaded. Divide this by the value of restNodeSoftloadTotal to determine the completion percentage. If no softloading is in progress, then this value is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restNodeSoftloadSoftwareType 1.3.6.1.4.1.16.101.1.2.2.1.1.31
Indicates type of software being transferred if a softload is in progress. notApplicable will be returned if no softload is in progress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ncp(1), t1m(5), e1m(6), sgm(7), lgm(8), asm(9), fsm(11), sdm(12), rtm(14), dsm(19), e3m(20), ad10(128), tableOC(254), mibSchema(252), stDatabase(255), ad10Database(251), rtmAdDatabase(253), notApplicable(256)  

restNodeUploadStatus 1.3.6.1.4.1.16.101.1.2.2.1.1.32
Each upload client, which is used to upload files to SNMS or to other nodes, is represented by one octet. There are a maximum of eight upload clients per ST node. The possible values for a single octet (that is, a single upload client) are the following: idle(36) - no upload has occurred uploading(68) - upload is in progress success(65) - upload completed successfully noResource(106) - upload failure reason transmitFailure(107) - upload failure reason receiveFailure(108) - upload failure reason failure(43) - miscellaneous failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

restNodeUploadTotal 1.3.6.1.4.1.16.101.1.2.2.1.1.33
Total number of bytes to be uploaded to ech of up to eight clients. Each client uses four bytes for its value. If no uploading is in progress, then the value for that client will be zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(32)  

restNodeUploadSize 1.3.6.1.4.1.16.101.1.2.2.1.1.34
Number of bytes that have been uploaded to each of up to eight clients. Each client uses four bytes for its value. Divide each client's value in this field by the corresponding value in restNodeUploadTotal to determine the completion percentage. If no uploading is in progress, then the value for that client will be zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(32)  

restNodeUploadClientID 1.3.6.1.4.1.16.101.1.2.2.1.1.35
Specifies the node numbers of the eight clients that this node is serving during an upload. Each client is identified by two bytes. If the client is an EMS, then the value will be xFFFE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(16)  

restNodeTotalDsmCallsPerSecond 1.3.6.1.4.1.16.101.1.2.2.1.1.36
This is the total amount of calls per second (in units of 0.01 calls per second) allocated for DSM in this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restNestTable 1.3.6.1.4.1.16.101.1.2.2.2
This section of the MIB does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestNestEntry

restNestEntry 1.3.6.1.4.1.16.101.1.2.2.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestNestEntry  

restNestAddr 1.3.6.1.4.1.16.101.1.2.2.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  NestAddr  

restNestDiagnostics 1.3.6.1.4.1.16.101.1.2.2.2.1.2
Remove will logically remove all of the modules in the nest, except the NCP, LXM, and RXM. This will free up the bus bandwidth. The configuration start mode of each module that is removed will be set to off. Insert will logically insert all of the modules in the nest, except the NCP, LXM, and RXM. The configuration MIB for each module will be loaded. The configuration start mode of each module that is inserted will be set to automatic. Reset will reset all modules in the nest except for the NCP, LXM, and RXM. It is equivalent to a remove followed by an insert, except that the configuration start modes in the slot MIBs are not changed. Reset right circuit will reset the RXM to circuit 1. Reset left circuit will reset the LXM to circuit 1. Toggle right circuit will toggle the circuit on the RXM. Toggle left circuit will toggle the circuit on the LXM. Set loopback LXM and set loopback RXM will loopback the appropriate end module in the nest. Clear loopback LXM and set loopback RXM will clear the loopback on the appropriate end module in the nest.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(3), insert(4), remove(5), resetRightCircuit(13), resetLeftCircuit(14), toggleRightCircuit(15), toggleLeftCircuit(16), setLoopbackLxm(21), setLoopbackRxm(22), clearLoopbackLxm(23), clearLoopbackRxm(24)  

restNestStatus 1.3.6.1.4.1.16.101.1.2.2.2.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initializing(49), online(48), failed(43)  

restNestCondition 1.3.6.1.4.1.16.101.1.2.2.2.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(57), exception(52)  

restNestNumberOfModules 1.3.6.1.4.1.16.101.1.2.2.2.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..17  

restNestPowerStatus 1.3.6.1.4.1.16.101.1.2.2.2.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER good(57), fail(43)  

restNestFanStatus 1.3.6.1.4.1.16.101.1.2.2.2.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER good(57), fail(43)  

restNestTemperature 1.3.6.1.4.1.16.101.1.2.2.2.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), tooHigh(2)  

restNestClockReference1 1.3.6.1.4.1.16.101.1.2.2.2.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

restNestClockReference2 1.3.6.1.4.1.16.101.1.2.2.2.1.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

restNestBusLoopbackStatus 1.3.6.1.4.1.16.101.1.2.2.2.1.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER leftEnable(33), rightEnable(34), disable(2)  

restNestSlotPresence 1.3.6.1.4.1.16.101.1.2.2.2.1.12
The lsb of the second octet represents slot 1, and the msb of the first octet represents slot 16. Slot 17 always has an RXM. Each bit set to 1 indicates that a module is present in that slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restNestActiveRight 1.3.6.1.4.1.16.101.1.2.2.2.1.13
RXM status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER circuit1(1), circuit2(2), noRxm(3)  

restNestActiveLeft 1.3.6.1.4.1.16.101.1.2.2.2.1.14
LXM status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER circuit1(1), circuit2(2), noLxm(3)  

restNestRxmCkt1Status 1.3.6.1.4.1.16.101.1.2.2.2.1.15
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pass(1), fail(2), noRxm(3)  

restNestRxmCkt2Status 1.3.6.1.4.1.16.101.1.2.2.2.1.16
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pass(1), fail(2), noRxm(3)  

restNestLxmCkt1Status 1.3.6.1.4.1.16.101.1.2.2.2.1.17
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pass(1), fail(2), noLxm(3)  

restNestLxmCkt2Status 1.3.6.1.4.1.16.101.1.2.2.2.1.18
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pass(1), fail(2), noLxm(3)  

restSlotTable 1.3.6.1.4.1.16.101.1.2.2.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestSlotEntry

restSlotEntry 1.3.6.1.4.1.16.101.1.2.2.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestSlotEntry  

restSlotAddr 1.3.6.1.4.1.16.101.1.2.2.3.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restSlotModuleDiagnostics 1.3.6.1.4.1.16.101.1.2.2.3.1.2
Remove will free bus bandwidth used by the ports of the module, and set the module start mode in the configuration MIB to off. Insert on a removed module will get the new MIB and software, and set the module start mode in the configuration MIB to automatic. Reset is equivalent to a remove and insert, except it does not change the module start mode in the configuration MIB. Update will load the non-intrusive parameters from the module configuration MIB. If any intrusive parameters have been changed, then update will fail.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(3), insert(4), remove(5), update(7)  

restSlotModuleStatus 1.3.6.1.4.1.16.101.1.2.2.3.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(44), standby(47), fail(43), removed(5), busDisable(53), loading(54), initializing(55)  

restSlotModuleFailureType 1.3.6.1.4.1.16.101.1.2.2.3.1.4
If module status is fail, indicates what type of failure occurred. notApplicable will be returned if the module status is not fail. noRTS means that the module's run-time software is not on the NCP flash.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER module(1), port(2), noMib(3), errorMib(4), noRTS(5), notApplicable(255)  

restSlotModuleCondition 1.3.6.1.4.1.16.101.1.2.2.3.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(57), exception(52)  

restSlotSWModuleType 1.3.6.1.4.1.16.101.1.2.2.3.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ncp(1), lxm(3), rxm(4), t1m(5), e1m(6), sgm(7), lgm(8), asm(9), fsm(11), sdm(12), sgmAg(13), rtm(14), dsm(19), e3m(20)  

restSlotSWModuleSubType 1.3.6.1.4.1.16.101.1.2.2.3.1.7
All the subtypes are defined in recfSlotModuleSubType entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

restSlotModuleIDFormat 1.3.6.1.4.1.16.101.1.2.2.3.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSlotHWModuleType 1.3.6.1.4.1.16.101.1.2.2.3.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ncp(1), lxm(3), rxm(4), t1m(5), e1m(6), sgm(7), lgm(8), asm(9), fsm(11), sdm(12), rtm(14), dsm(19), e3m(20)  

restSlotHWModuleSubType 1.3.6.1.4.1.16.101.1.2.2.3.1.10
All the subtypes are defined in recfSlotModuleSubType entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

restSlotModuleAssemblyNum 1.3.6.1.4.1.16.101.1.2.2.3.1.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(16)  

restSlotModuleRevision 1.3.6.1.4.1.16.101.1.2.2.3.1.12
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(16)  

restSlotModuleSerialNum 1.3.6.1.4.1.16.101.1.2.2.3.1.13
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(16)  

restSlotModuleDateMade 1.3.6.1.4.1.16.101.1.2.2.3.1.14
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

restSlotActiveRedundantSlot 1.3.6.1.4.1.16.101.1.2.2.3.1.15
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restSlotModuleSWRevision 1.3.6.1.4.1.16.101.1.2.2.3.1.16
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

restSlotStartupDiagResults 1.3.6.1.4.1.16.101.1.2.2.3.1.17
Each bit displays the result (pass/fail) of a startup diagnostic. The bit map for the first four bytes is defined in recfSlotModuleStartDiagMask. The bit map for the last four bytes is defined in recfSlotModuleStartDiagMaskExt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4..8)  

restSlotBGDiagResults 1.3.6.1.4.1.16.101.1.2.2.3.1.18
Each bit displays the result (pass/fail) of a background diagnostic. The bit map for the first four bytes is defined in recfSlotModuleBgdDiagMask. The bit map for the last four bytes is defined in recfSlotModuleBgdDiagMaskExt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4..8)  

restSlotNumActivePorts 1.3.6.1.4.1.16.101.1.2.2.3.1.19
INTRODUCED 2.0.0 Number of ports on this module that have a restPortStatus value of active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSlotNumNormalPorts 1.3.6.1.4.1.16.101.1.2.2.3.1.20
INTRODUCED 2.0.0 Number of ports on this module that have a restPortCondition value of normal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restModule 1.3.6.1.4.1.16.101.1.2.2.4
OBJECT IDENTIFIER    

restNcpTable 1.3.6.1.4.1.16.101.1.2.2.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestNcpEntry

restNcpEntry 1.3.6.1.4.1.16.101.1.2.2.4.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestNcpEntry  

restNcpAddr 1.3.6.1.4.1.16.101.1.2.2.4.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restNcpBootPromRevision 1.3.6.1.4.1.16.101.1.2.2.4.1.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

restNcpMacAddr 1.3.6.1.4.1.16.101.1.2.2.4.1.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(17)  

restNcpFlashObjectVersions 1.3.6.1.4.1.16.101.1.2.2.4.1.1.4
DEPRECATED 2.0.1 The information in this attribute has been replaced by the restNcpFlashTable section of the MIB. For each module type whose run-time software is stored in the NCP flash PROM, this attribute returns the software type (2 bytes), CRC (2 bytes), and version number (4 bytes). The values for software type match the enumerations for the attribute scSoftloadSoftwareType. If the flash PROM of the NCP cannot currently be read (such as when a softload is in progress), this attribute will return eight bytes with all zeros.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..120)  

restNcpFlashTable 1.3.6.1.4.1.16.101.1.2.2.4.2
This MIB section lists all of the module object files stored in the flash PROM of the specified NCP. This section of the MIB does not support getNext. If the flash PROM is currently being written to, then all attributes in this MIB section will return an error.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestNcpFlashEntry

restNcpFlashEntry 1.3.6.1.4.1.16.101.1.2.2.4.2.1
INTRODUCED 2.0.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestNcpFlashEntry  

restNcpFlashAddr 1.3.6.1.4.1.16.101.1.2.2.4.2.1.1
The address of the NCP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restNcpFlashIndex 1.3.6.1.4.1.16.101.1.2.2.4.2.1.2
Used to differentiate the different module object files in the NCP flash PROM. This attribute does not contain any information about the file in flash.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

restNcpFlashModuleType 1.3.6.1.4.1.16.101.1.2.2.4.2.1.3
The module type of this object file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ncp(1), t1m(5), e1m(6), sgm(7), lgm(8), asm(9), fsm(11), sdm(12), rtm(14), dsm(19), e3m(20), mibSchema(252), tableOfContents(254)  

restNcpFlashRecoveryIndicator 1.3.6.1.4.1.16.101.1.2.2.4.2.1.4
Indicates whether or not this object file is stored in the softload recovery area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER recovery(2), normal(1)  

restNcpFlashCompressIndicator 1.3.6.1.4.1.16.101.1.2.2.4.2.1.5
Indicates whether or not this object file is compressed or uncompressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER compressed(1), uncompressed(2)  

restNcpFlashFileVersionNumber 1.3.6.1.4.1.16.101.1.2.2.4.2.1.6
The software revision number of this module object file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

restNcpFlashFileSize 1.3.6.1.4.1.16.101.1.2.2.4.2.1.7
The size of this module object file in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2048000  

restNcpFlashFileStoredCrc 1.3.6.1.4.1.16.101.1.2.2.4.2.1.8
The stored CRC of this module object file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

restNcpFlashFileCrcCheck 1.3.6.1.4.1.16.101.1.2.2.4.2.1.9
If pass is returned, then the file image in flash passed a CRC check. If fail is returned, then the CRC check failed and the file is corrupted. If not applicable is returned, then we do not support CRC checking for this file on this NCP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pass(1), fail(2), notApplicable(255)  

restFsmTable 1.3.6.1.4.1.16.101.1.2.2.4.6
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestFsmEntry

restFsmEntry 1.3.6.1.4.1.16.101.1.2.2.4.6.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestFsmEntry  

restFsmAddr 1.3.6.1.4.1.16.101.1.2.2.4.6.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restFsmBypassBandwidth 1.3.6.1.4.1.16.101.1.2.2.4.6.1.2
Maximum available bypass capability in units of packets. Bypass capability is also limited by restFsmBandwidthAvail.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmSourceBandwidth 1.3.6.1.4.1.16.101.1.2.2.4.6.1.3
Maximum available termination capability in units of packets. Termination capability also limited by restFsmBandwidthAvail.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmBandwidthAvail 1.3.6.1.4.1.16.101.1.2.2.4.6.1.4
FSM available processing capability to serve new termination or bypass channel, in units of packets. This may be less than the sum of restFsmBypassBandwidth and restFsmSourceBandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmPortSpeedAvail 1.3.6.1.4.1.16.101.1.2.2.4.6.1.5
FSM available port speed capability in units of bps. This only indicates the capability to support termination channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmDlciTotal 1.3.6.1.4.1.16.101.1.2.2.4.6.1.6
Total number of DLCIs permitted on this FSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmDlciAvail 1.3.6.1.4.1.16.101.1.2.2.4.6.1.7
Number of DLCIs that can still be connected on this FSM module. The number of DLCIs that are connected on the module can be determined by subtracting this value from restFsmDlciTotal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmDlciConfig 1.3.6.1.4.1.16.101.1.2.2.4.6.1.8
Number of DLCIs that are configured on frame relay ports allocated to this FSM module. A new FSM port cannot be allocated on this module if the number of DLCIs configured on the port plus this value exceeds the value of restFsmDlciTotal. For FSM ports which are currently allocated, new DLCIs which are configured will increment this value. In this case, this value will be allowed to exceed restFsmDlciTotal so that existing channel connections will not be disrupted. However, the new DLCIs cannot be connected when restFsmDlciAvail is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmBypChanTotal 1.3.6.1.4.1.16.101.1.2.2.4.6.1.9
Total number of bypass channels permitted on this FSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmBypChanAvail 1.3.6.1.4.1.16.101.1.2.2.4.6.1.10
Number of bypass channels that can still be connected on this FSM module. The number of bypass channels that are connected on the module can be determined by subtracting this value from restFsmBypChanTotal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmCirTotal 1.3.6.1.4.1.16.101.1.2.2.4.6.1.11
Total CIR on FSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmCirAvail 1.3.6.1.4.1.16.101.1.2.2.4.6.1.12
Available (unused) CIR on FSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmVciCtrlBlkTotal 1.3.6.1.4.1.16.101.1.2.2.4.6.1.13
Total number of Vci Control Blocks allowed on FSM module. Each DLCI terminated on the module requires one Vci Control Block. Each bypass channel on the module requires two Vci Control Blocks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmVciCtrlBlkAvail 1.3.6.1.4.1.16.101.1.2.2.4.6.1.14
Number of available (unused) PVCs on FSM module. Each DLCI terminated on the module requires one Vci Control Block. Each bypass channel on the module requires two Vci Control Blocks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmTotalBuffers 1.3.6.1.4.1.16.101.1.2.2.4.6.1.15
Total number of channel buffers on FSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmBuffersAvail 1.3.6.1.4.1.16.101.1.2.2.4.6.1.16
Number of available (unused) channel buffers on FSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restFsmCcfSupportIndicator 1.3.6.1.4.1.16.101.1.2.2.4.6.1.17
INTRODUCED 2.1.0 Indicates whether or not this module is capable of supporting CCFs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER supported(1), notSupported(2)  

restSgmAgTable 1.3.6.1.4.1.16.101.1.2.2.4.7
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestSgmAgEntry

restSgmAgEntry 1.3.6.1.4.1.16.101.1.2.2.4.7.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestSgmAgEntry  

restSgmAgAddr 1.3.6.1.4.1.16.101.1.2.2.4.7.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restSgmAgmPortAvail 1.3.6.1.4.1.16.101.1.2.2.4.7.1.2
Number of AGM ports that are available for use on this SGM/AG module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgmPortTotal 1.3.6.1.4.1.16.101.1.2.2.4.7.1.3
Total number of AGM ports that are on this SGM/AG module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgSafAvail 1.3.6.1.4.1.16.101.1.2.2.4.7.1.4
Number of SAF ports that are available for use on this SGM/AG module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgSafTotal 1.3.6.1.4.1.16.101.1.2.2.4.7.1.5
Total number of SAF ports that are on this SGM/AG module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgSgmScfAvail 1.3.6.1.4.1.16.101.1.2.2.4.7.1.6
Number of SGM SCF ports that are available for use on this SGM/AG module. If the software type of the module is AGM, then zero shall be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgSgmScfTotal 1.3.6.1.4.1.16.101.1.2.2.4.7.1.7
Total number of SGM SCF ports that are on this SGM/AG module. If the software type of the module is AGM, then zero shall be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgAgmScfAvail 1.3.6.1.4.1.16.101.1.2.2.4.7.1.8
Number of AGM SCF ports that are available for use on this SGM/AG module. This value is valid for both SGM and AGM module software types.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgAgmScfTotal 1.3.6.1.4.1.16.101.1.2.2.4.7.1.9
Total number of AGM SCF ports that are on this SGM/AG module. This value is valid for both SGM and AGM module software types.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgAgmCcfAvail 1.3.6.1.4.1.16.101.1.2.2.4.7.1.10
INTRODUCED 2.1.0 Number of AGM CCF ports that are available for use on this SGM/AG module. This value is valid for both SGM and AGM module software types.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgAgmCcfTotal 1.3.6.1.4.1.16.101.1.2.2.4.7.1.11
INTRODUCED 2.1.0 Total number of AGM CCF ports that are on this SGM/AG module. This value is valid for both SGM and AGM module software types.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restSgmAgAgmPortCapacity 1.3.6.1.4.1.16.101.1.2.2.4.7.1.12
INTRODUCED 2.1.0 List of AGM port speeds that are supported by this SGM/AG module. Every 4 bytes indicates one speed. The following speeds are supported: 19200 bps, 56000 bps, 64000 bps, 128000 bps
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

restAsm 1.3.6.1.4.1.16.101.1.2.2.4.8
OBJECT IDENTIFIER    

restAsmModuleTable 1.3.6.1.4.1.16.101.1.2.2.4.8.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAsmModuleEntry

restAsmModuleEntry 1.3.6.1.4.1.16.101.1.2.2.4.8.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestAsmModuleEntry  

restAsmModuleAddr 1.3.6.1.4.1.16.101.1.2.2.4.8.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restAsmModuleMaxCelp 1.3.6.1.4.1.16.101.1.2.2.4.8.1.1.2
Indicates the number of CELP licenses on the module.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restAsmModuleNumCelpAvail 1.3.6.1.4.1.16.101.1.2.2.4.8.1.1.3
Indicates the number of CELP licenses on the module that are not in use.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restAsmModuleTotalEngines 1.3.6.1.4.1.16.101.1.2.2.4.8.1.1.4
Indicates the total number of DSP engines on the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restAsmModuleAvailEngines 1.3.6.1.4.1.16.101.1.2.2.4.8.1.1.5
Indicates the currently available (unused) number of DSP engines on the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restAsmModuleTotalSafScfs 1.3.6.1.4.1.16.101.1.2.2.4.8.1.1.6
Indicates the total number of SAFs and SCFs that can be allocated on this ASM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..448  

restAsmModuleAvailSafScfs 1.3.6.1.4.1.16.101.1.2.2.4.8.1.1.7
Indicates the currently available (unused) number of SAFs and SCFs on this ASM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..448  

restAsmEngineTable 1.3.6.1.4.1.16.101.1.2.2.4.8.2
This section of the MIB doesn't support getNext
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAsmEngineEntry

restAsmEngineEntry 1.3.6.1.4.1.16.101.1.2.2.4.8.2.1
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RestAsmEngineEntry  

restAsmEngineModuleAddr 1.3.6.1.4.1.16.101.1.2.2.4.8.2.1.1
Physical address of the ASM module
Status: deprecated Access: read-only
OBJECT-TYPE    
  SlotAddr  

restAsmEngineID 1.3.6.1.4.1.16.101.1.2.2.4.8.2.1.2
The engine ID on ASM module
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

restAsmEngineDiagnostics 1.3.6.1.4.1.16.101.1.2.2.4.8.2.1.3
Not used yet
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  INTEGER insert(4), remove(5), reset(6)  

restAsmEngineStatus 1.3.6.1.4.1.16.101.1.2.2.4.8.2.1.4
These applications cannot be on the same engine at the same time
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER x50(1), celp(2), adpcm(3), free(4), removed(5), normal(6), failed(43)  

restAsmEngineNumPorts 1.3.6.1.4.1.16.101.1.2.2.4.8.2.1.5
Number of application ports
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

restAsmEngineNumSAFs 1.3.6.1.4.1.16.101.1.2.2.4.8.2.1.6
Number of SAF ports. If none returns zero
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

restAsmEngineNumSCFs 1.3.6.1.4.1.16.101.1.2.2.4.8.2.1.7
Number of SCF ports. If none returns zero
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..80  

restAsmEngineApplication 1.3.6.1.4.1.16.101.1.2.2.4.8.2.1.8
Indicates the type of application allocated on this DSP engine, if any.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER x50(1), celp-atc(2), adpcm(3), none(255)  

restAsmModApplTable 1.3.6.1.4.1.16.101.1.2.2.4.8.3
This section of the MIB enables the user to determine the availability of specific resource types on an ASM module based upon the current resource allocation. This section of the MIB doesn't support getNext
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAsmModApplEntry

restAsmModApplEntry 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestAsmModApplEntry  

restAsmModApplModuleAddr 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1.1
Physical address of the ASM module
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restAsmModApplType 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1.2
The ASM application type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x50(1), celp-atc(2), adpcm(3)  

restAsmModApplMaxPortsAllowed 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1.3
The maximum number of ports which can be allocated on the ASM module running the specified application. This value assumes that the module is running no other applications. This value is based on the following factors: (1) total number of DSP engines on the module (2) total number of ports allowed on the module (3) total number of application licenses on the module, if the application is licensed (4) module application type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32  

restAsmModApplCurPortsAllowed 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1.4
The current number of ports which can be allocated on the ASM module running the specified application. This determines how many ports can still be allocated based on what resources are currently allocated on the module. It indicates how many more ports of this application can be added if all new allocations are ports running this application. The total number of ports that can still be allocated in a mixed application scenario is NOT the sum of all of these values for each application. The value of this value is based on the following factors: (1) number of unallocated DSP engines (2) available ports on DSP engines which are already allocated for this application type (3) number of ports that can still be allocated on the module (4) licenses available, if the application is licensed (5) module application type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32  

restAsmModApplCurPortsAllocated 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1.5
The current number of ports which are allocated on the ASM module and are running the specified application.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32  

restAsmModApplEnginesUsed 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1.6
The total number of DSP engines on the ASM module that are currently allocated for this application type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restAsmModApplEnginesRsvd 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1.7
The total number of unallocated DSP engines on the ASM module that are reserved for this application type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restAsmModApplTotalLicenses 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1.8
The total number of licenses available on the ASM module for this application type. If the application is unlicensed, then a value of zero shall be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restAsmModApplAvailLicenses 1.3.6.1.4.1.16.101.1.2.2.4.8.3.1.9
A count of the licenses on the ASM module for this application type which are not currently in use. If the application is unlicensed, then a value of zero shall be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restRtm 1.3.6.1.4.1.16.101.1.2.2.4.9
OBJECT IDENTIFIER    

restRtmModuleTable 1.3.6.1.4.1.16.101.1.2.2.4.9.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestRtmModuleEntry

restRtmModuleEntry 1.3.6.1.4.1.16.101.1.2.2.4.9.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestRtmModuleEntry  

restRtmModuleAddr 1.3.6.1.4.1.16.101.1.2.2.4.9.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restRtmModuleDS0sUsed 1.3.6.1.4.1.16.101.1.2.2.4.9.1.1.2
Current number of DS0 connections from AD-x units on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..24  

restRtmModuleDS0sAvail 1.3.6.1.4.1.16.101.1.2.2.4.9.1.1.3
With the current number of DS0 and SAF connections, this field specifies the number of DS0 connections that could still be made assuming no more SAF connections are made.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..24  

restRtmModuleSafsUsed 1.3.6.1.4.1.16.101.1.2.2.4.9.1.1.4
Current number of SAF connections from AD-x units on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..30  

restRtmModuleSafsAvail 1.3.6.1.4.1.16.101.1.2.2.4.9.1.1.5
With the current number of DS0 and SAF connections, this field specifies the number of SAF connections that could still be made assuming no more DS0 connections are made.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..30  

restDsmModule 1.3.6.1.4.1.16.101.1.2.2.4.10
OBJECT IDENTIFIER    

restDsmModuleTable 1.3.6.1.4.1.16.101.1.2.2.4.10.1
This section of the MIB is used to get status of any DSM modules defined on the node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestDsmModuleEntry

restDsmModuleEntry 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestDsmModuleEntry  

restDsmModuleAddr 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.1
Address of this DSM module. Format is nest.slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restDsmModuleNumDsmComms 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.2
Number of DSMs that this DSM is able to communicate with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleNumCallsProc 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.3
Number of calls in the non-idle state (in the process of connection, connected or in the process of disconnection).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleNumRmtRteEntries 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.4
Total number of entries allowed in the remote routing table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleNumRmtRteAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.5
Number of entries in the remote routing table that are available. The number of occupied entries can be determined by subtracting this value from restDsmModuleNumRmtRteEntries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleNumLocRteEntries 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.6
Total number of entries allowed in the local routing table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleNumLocRteAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.7
Number of entries in the local routing table that are available. The number of occupied entries can be determined by subtracting this value from restDsmModuleNumLocRteEntries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleBypassPPSTotal 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.8
Total bypass throughput allowed on this DSM module in units of packets per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleBypassPPSAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.9
Available bypass capability in units of packets per second. The currently being used bypass throughput on the module can be determined by subtracting this value from restDsmModuleBypassPPSTotal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleBypChanTotal 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.10
Total number of bypass channels permitted on this DSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleBypChanAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.11
Number of bypass channels that can still be connected on this DSM module. The number of bypass channels that are connected on the module can be determined by subtracting this value from restDsmModuleBypChanTotal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleCirTotal 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.12
Total CIR on this DSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleCirAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.13
Available (unused) CIR on this DSM module. The currently being used CIR can be determined by subtracting this value from restDsmModuleBypChanTotal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleVciCtrlBlkTotal 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.14
Total number of Vci Control Blocks allowed on this DSM module. Each DLCI terminated on the module requires one Vci Control Block. Each bypass channel on the module requires two Vci Control Blocks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleVciCtrlBlkAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.15
Number of available (unused) PVCs on this DSM module. Each DLCI terminated on the module requires one Vci Control Block. Each bypass channel on the module requires two Vci Control Blocks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleTotalBuffers 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.16
Total number of channel buffers allowed on this DSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleBuffersAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.17
Number of available (unused) channel buffers on DSM module. The number of channel buffers that are currently being used on the module can be determined by subtracting this value from restDsmModuleTotalBuffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleTotalRecCDRs 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.18
Total number of recorded CDRs allowed on this DSM module. This value is counted across all CDR logs
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleRecCDRsAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.19
Number of available (unused) CDRs on this DSM module. These CDRs may be assigned to any of the CDR logs defined on this DSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleTotalCallsPerSec 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.20
This is the total amount of calls per second (in units of 0.01 calls per second) that can be handled by this DSM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleCallsPerSecAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.21
This is the amount of calls per second (in units of 0.01 calls per second) that can be allocated on this DSM. The number of calls per second currently allocated to the module can be determined by subtracting this number from the value of restDsmModuleTotalCallsPerSec attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleCallsPerSecFactor 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.22
This is the conversion factor between calls per second (in units of 0.01 calls per second) and processing units. The equation is: processing units = this value * calls per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleBypassFactor 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.23
This is the conversion factor between bypass bandwidth (in PPS) and processing units. The equation is: processing units = this value * bypass bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleTotalProcessUnits 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.24
This is a rating for the total number of D-channel calls per second and bypass bandwidth allowed on this DSM. The two quantities are converted to the same units using the values of the restDsmModuleCallsPerSecFactor and restDsmModuleBypassFactor attributes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModuleProcessUnitsAvail 1.3.6.1.4.1.16.101.1.2.2.4.10.1.1.25
This is a rating of the number of the number of D-channel calls per second and bypass bandwidth that is unused on this DSM. To determine the amount that is currently allocated, subtract this value from restDsmModuleTotalProcessUnits attribute value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModRecCDRLogTable 1.3.6.1.4.1.16.101.1.2.2.4.10.2
This section of the MIB specifies status of the Call Detail Record log for completed calls.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestDsmModRecCDRLogEntry

restDsmModRecCDRLogEntry 1.3.6.1.4.1.16.101.1.2.2.4.10.2.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestDsmModRecCDRLogEntry  

restDsmModRecCDRLogAddr 1.3.6.1.4.1.16.101.1.2.2.4.10.2.1.1
Address of this DSM module. Format is nest.slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restDsmModRecCDRLogIndex 1.3.6.1.4.1.16.101.1.2.2.4.10.2.1.2
CDR log number on this DSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

restDsmModRecCDRLogStatus 1.3.6.1.4.1.16.101.1.2.2.4.10.2.1.3
This CDR log overflow flag status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER overflow(3), noOverflow(4), overThreshold(5), disabled(2)  

restDsmModRecCDRLogLev1Entries 1.3.6.1.4.1.16.101.1.2.2.4.10.2.1.4
Number of level 1 CDRs for this CDR log.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModRecCDRLogLev2Entries 1.3.6.1.4.1.16.101.1.2.2.4.10.2.1.5
Number of level 2 CDRs for this CDR log.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmModRecCDRLogClrEntries 1.3.6.1.4.1.16.101.1.2.2.4.10.2.1.6
Number of entries on this CDR log to be cleared, counting from the oldest record.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER 1..1000  

restDsmModRecCDRTable 1.3.6.1.4.1.16.101.1.2.2.4.10.3
This section of the MIB contains the status of a Call Detail Records for completed call.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestDsmModRecCDREntry

restDsmModRecCDREntry 1.3.6.1.4.1.16.101.1.2.2.4.10.3.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestDsmModRecCDREntry  

restDsmModRecCDRAddr 1.3.6.1.4.1.16.101.1.2.2.4.10.3.1.1
Address of this DSM module. Format is nest.slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restDsmModRecCDRLogNum 1.3.6.1.4.1.16.101.1.2.2.4.10.3.1.2
Specifies the CDR log number to be accessed on this DSM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

restDsmModRecCDRIndex 1.3.6.1.4.1.16.101.1.2.2.4.10.3.1.3
Identifies the Call Detail Record to be accessed on this log based on its position (counting from the oldest one).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000  

restDsmModRecCDRContents 1.3.6.1.4.1.16.101.1.2.2.4.10.3.1.4
Call Detail Record from a module CDR log. These CDRs are for completed calls. The bytes in a CDR for a completed call are interpretted as follows: 1: CDR type, values are: level 1 (1) level 2 (2) 2: version number 3-4: partition ID 5-6: call ID 7: protocol type, values are: DPNSS (1) Q.Sig (2) 8: unused From this position down the contents definition varies, depending on the interface level (CDR type). For Level 1 CDRs (Physical Characteristics): 9-12: originating time 13-16: answer time 17-20: disconnect time 21-22: B-channel source node ID 23: B-channel source nest ID 24: B-channel source slot ID 25-26: B-channel source port ID 27-28: B-channel source channel ID 29-30: B-channel destination node ID 31: B-channel destination nest ID 32: B-channel destination slot ID 33-34: B-channel destination port ID 35-36: B-channel destination channel ID 37: call type, values are: real (3) virtual (0) 38: special profile type, values defined in attribute recfDsmDChQOSCallType 39: info type, values are: Q.Sig speech (0) DPNSS A-law (1) DPNSS ADPCM (2) DPNSS Mu-law (3) Unrestricted data (8) Restricted data (9) 3.1 KHz audio (16) 7 KHz audio (17) video (24) 40: special profile index 41: channel profile index 42: NCP clear cause - values are defined in recfTDMChannelState 43: clear cause, values are: (If NCP clear cause is not zero, this byte is not used.) - DPNSS values: number unobtainable (0) address incomplete (1) network termination (2) service unavailable (3) subscriber incompatible (4) congestion/collision (7) busy (8) subscriber out of service (9) incoming calls barred (10) service incompatible (19) acknowledgement (20) signal not understood (21) signal not valid (22) service temporarily unavailable (23) facility not registered (24) reject (25) message not understood (26) signalling system incompatible (27) route out of service (28) transferred (29) network address extension error (30) no free channel or channel unavailable from NCP (34) channel out of service (35) priority forced release (36) access barred (41) requested channel unavailable(44) DTE controlled not ready (45) DTE uncontrolled not ready (46) normal call termination (48) unbinding (101) version invalid (103) B-channel failure cause (112) D-channel failure cause (113) socket failure cause (114) - Q.Sig values: (supported in Release 2.0.2) no cause (0) no route (3) channel unacceptable (6) normal call clearing (16) user busy (17) no user responding (18) no answer (19) call rejected (21) number changed (22) out of order (27) T302 timer expiration or invalid number format (28) status response (30) normal unspecified (31) no free channel or channel unavailable from NCP (34) link reset or temporary failure (41) requested channel unavailable(44) bearer not authorized (57) bearer not available (58) service not available (63) bearer not implemented (65) invalid call reference (81) incompatible destination (88) no bearer capability or no address or mandatory element missing (96) message type not implemented (97) message type incompatible (98) information type not implemented (99) invalid information element contents (100) unbinding (101) recovery on timer expiry (102) version invalid (103) protocol error (111) B-channel failure cause (112) D-channel failure cause (113) socket failure cause (114) 44: number of call attempts between DSMs 45-48: transmission rate For Level 2 CDRs (Data Link Layer): 9-12: setup final time 13-16: connect request time 17-20: connect response time 21-22: source node ID 23: source nest ID 24: source slot ID 25-26: destination node ID 27: destination nest ID 28: destination slot ID 29: calling number size (number of bytes, not string length) - this number is referred to from now on as x 30-(29+x): calling number (30+x): called number size (number of bytes, not string length) - this number is referred to from now on as y (31+x)-(30+x+y): called number (31+x+y): routing digits (32+x+y): unused.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(72)  

restDsmModExchTable 1.3.6.1.4.1.16.101.1.2.2.4.10.4
This section of the MIB returns the exact exchange code used by the specified DSM for a given call number. It does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestDsmModExchEntry

restDsmModExchEntry 1.3.6.1.4.1.16.101.1.2.2.4.10.4.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestDsmModExchEntry  

restDsmModExchAddr 1.3.6.1.4.1.16.101.1.2.2.4.10.4.1.1
Address of DSM module. Format is nest.slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restDsmModExchCallNumLen 1.3.6.1.4.1.16.101.1.2.2.4.10.4.1.2
This attribute defines the length of the restDsmModExchCallNumber attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

restDsmModExchCallNumber 1.3.6.1.4.1.16.101.1.2.2.4.10.4.1.3
The call number. The valid character set is defined in recfDsmDChExchTable MIB section.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..16)  

restDsmModExchPartition 1.3.6.1.4.1.16.101.1.2.2.4.10.4.1.4
The partition id of the instance the user is inquiring information on. Partition 1 (global) should not match the instance partition id. It is able to obtain an info for any partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

restDsmModExchCode 1.3.6.1.4.1.16.101.1.2.2.4.10.4.1.5
The call numbers matched exchange code. If there is no matched exchange code, an error message will be returned. The valid character set is defined in recfDsmDChExchTable MIB section.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..16)  

restDsmModRteTable 1.3.6.1.4.1.16.101.1.2.2.4.10.5
This section of the MIB specifies all entries on both the local and remote routing tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestDsmModRteEntry

restDsmModRteEntry 1.3.6.1.4.1.16.101.1.2.2.4.10.5.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestDsmModRteEntry  

restDsmModRteAddr 1.3.6.1.4.1.16.101.1.2.2.4.10.5.1.1
Address of DSM module. Format is nest.slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restDsmModRteExchCodeLen 1.3.6.1.4.1.16.101.1.2.2.4.10.5.1.2
This attribute defines the length of the restDsmModRteExchCode attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

restDsmModRteExchCode 1.3.6.1.4.1.16.101.1.2.2.4.10.5.1.3
The exchange code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..16)  

restDsmModRtePartition 1.3.6.1.4.1.16.101.1.2.2.4.10.5.1.4
Route partition ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

restDsmModRteRemoteNode 1.3.6.1.4.1.16.101.1.2.2.4.10.5.1.5
Identifies the node containing the DSM that this routing entry refers to. For the local routing table entries, this attribute has a value of 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restDsmModRteRemoteSlot 1.3.6.1.4.1.16.101.1.2.2.4.10.5.1.6
Identifies the module address in the node defined in restDsmModRteRemoteNode that contains the DSM that this routing entry refers to. For the local routing table entries, this attribute has value of 0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restDsmModRteLocalPortNumber 1.3.6.1.4.1.16.101.1.2.2.4.10.5.1.7
Identifies the physical D-channel port on the DSM that this routing entry refers to. For the remote routing table entries, this attribute has value of 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..64  

restDsmModRteLocalPortAddress 1.3.6.1.4.1.16.101.1.2.2.4.10.5.1.8
INTRODUCED 2.0.1 Identifies the virtual port address of the D-channel port that this routing entry refers to if the route is a local one. For remote routing table entries, this attribute will return 0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restLgmModule 1.3.6.1.4.1.16.101.1.2.2.4.11
OBJECT IDENTIFIER    

restLgmModuleTable 1.3.6.1.4.1.16.101.1.2.2.4.11.1
This section of the MIB is used to get status of any LGM modules defined on the node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestLgmModuleEntry

restLgmModuleEntry 1.3.6.1.4.1.16.101.1.2.2.4.11.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestLgmModuleEntry  

restLgmModuleAddr 1.3.6.1.4.1.16.101.1.2.2.4.11.1.1.1
Address of this LGM module. Format is nest.slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restLgmModuleTotalSAFs 1.3.6.1.4.1.16.101.1.2.2.4.11.1.1.2
Maximum number of SAF allowed on this LGM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restLgmModuleAvailSAFs 1.3.6.1.4.1.16.101.1.2.2.4.11.1.1.3
Number of SAF that still can be allocated on this LGM module. Note that number of SAF allocated on this LGM module can be derived by subtraction of the value of this attribute from the value of restLgmModuleTotalSAFs attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restLgmModuleTotalSCFs 1.3.6.1.4.1.16.101.1.2.2.4.11.1.1.4
Maximum number of SCF allowed on this LGM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restLgmModuleAvailSCFs 1.3.6.1.4.1.16.101.1.2.2.4.11.1.1.5
Number of SCF that still can be allocated on this LGM module. Note that number of SCF allocated on this LGM module can be derived by subtraction of the value of this attribute from the value of restLgmModuleTotalSCFs attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restPortTable 1.3.6.1.4.1.16.101.1.2.2.5
This section of the MIB does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestPortEntry

restPortEntry 1.3.6.1.4.1.16.101.1.2.2.5.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestPortEntry  

restPortAddr 1.3.6.1.4.1.16.101.1.2.2.5.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restPortDiagnostics 1.3.6.1.4.1.16.101.1.2.2.5.1.2
Remove will free up the bus bandwidth used by the port. It will also set the port configuration start mode to off. This command will not work on server ports. For virtual ports, a disconnection of the I/O to server TDM channel is equivalent to a remove port. Insert will add removed ports back onto the bus, and will load the new configuration MIB to the port. It will also set the port configuration start mode to automatic. This command will not work on server ports. For virtual ports, a connection of the I/O to server TDM channel is equivalent to an insert port. Reset is equivalent to removing and then inserting a port for I/O ports. For server ports, reset will disconnect the I/O to server TDM channel. If the I/O side of the channel is set to auto connect, then the channel will be reconnected, although the virtual port may be allocated to a different physical port. Update will load non-intrusive configuration MIB changes to the port. If any intrusive changes have been made to the port configuration, then the command will fail. Set loopback will set a loopback on the port. The type of loopback is specified in restPortLoopbackType. Clear loopback will clear a loopback on the port.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(6), insert(4), remove(5), update(7), setLoopback(9), clearLoopback(8), clearEvent(10)  

restPortStatus 1.3.6.1.4.1.16.101.1.2.2.5.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(44), standby(47), maintenance(51), inactive(46), failed(43)  

restPortSubStatus 1.3.6.1.4.1.16.101.1.2.2.5.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), removed(5), undefined(50)  

restPortCondition 1.3.6.1.4.1.16.101.1.2.2.5.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(57), exception(52), undefined(50)  

restPortSubCondition 1.3.6.1.4.1.16.101.1.2.2.5.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(71), redAlarm(72), yellowAlarm(73), lmiFail(74), clockFail(75), msgTimeout(76), cfgMismatch(77), dnloadRmt(78), stToSt(79), serverLoopback(80), exceedPowerSpec(81), externalLoopback(82), remoteEndReset(83), los(98), ros(99), losAndRos(100), berOverFailThreshold(29), layer2TimeOut(30), layer2Mismatch(31), pending(33), oos(39)  

restPortType 1.3.6.1.4.1.16.101.1.2.2.5.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER t1m(5), e1m(6), sgm(7), lgm(8), asm(9), fsm(11), sdm(12), sgmAg(13), rtm(14), dsm(19), e3m(20)  

restPortLoopbackType 1.3.6.1.4.1.16.101.1.2.2.5.1.8
Indicates what type of loopback the user wishes to set on the port. lim specifies a local interface loopback. limDisc specifies a local interface loopback with disconnection. rim specifies a remote interface loopback. prefix ext means that this particular loopback is being set on external device, such as ADx. remoteBus specifies a loopback from remote ILC towards ST.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER lim(2), limDisc(3), rim(4), bidirectional(5), extLim(12), extRim(13), extBidirectional(14), extUlim(15), extIdlRim(16), remoteBus(17)  

restPortLoopbackDuration 1.3.6.1.4.1.16.101.1.2.2.5.1.9
Value 65535 specifies a permanent loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

restPortLoopbackStatus 1.3.6.1.4.1.16.101.1.2.2.5.1.10
If the port is in loopback, this field indicates the type of loopback. If the port is not in loopback, then none will be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), lim(2), limDisc(3), rim(4), bidirectional(5), facility(8), payload(9), localLoop(10), remoteLoop(11), extLim(12), extRim(13), extBidirectional(14), extUlim(15), extIdlRim(16), remoteBus(17)  

restPortLoopbackInitiator 1.3.6.1.4.1.16.101.1.2.2.5.1.11
If value is local, then loopback was initiated by user. If value is remote, then loopback was initiated by network. If no loopback is enabled, then this field should return not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(1), remote(2), notApplicable(255)  

restPortErrorIndication 1.3.6.1.4.1.16.101.1.2.2.5.1.12
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER set(1), clear(2)  

restPortSevereIndication 1.3.6.1.4.1.16.101.1.2.2.5.1.13
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER set(1), clear(2)  

restPortBGDiagResults 1.3.6.1.4.1.16.101.1.2.2.5.1.14
Results of port background diagnostics. Bit map is the same as for one port within recfSlotModulePortDiagMask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

restPortNumberOfBundles 1.3.6.1.4.1.16.101.1.2.2.5.1.15
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32  

restPortPhasorStatus 1.3.6.1.4.1.16.101.1.2.2.5.1.16
All bits zero indicates normal. bit 1 (lsb) indicates receive phasor underflow bit 2 indicates receive phasor overflow bit 3 indicates receive phasor empty bit 4 indicates receive phasor full bit 5 indicates receive phasor fifo error bit 6 indicates KGROS status bit 7 indicates KGLOS status bit 8 indicates receive phasor not applicable bit 9 indicates transmit phasor underflow bit 10 indicates transmit phasor overflow bit 11 indicates transmit phasor empty bit 12 indicates transmit phasor full bit 13 indicates transmit phasor fifo error bit 14 indicates KG status is not applicable bit 15 is reserved bit 16 indicates transmit phasor not applicable If port does not have a phasor, the return value will be x8080. Bits 6 and 7 are applicable only to SDM module and reflect the KG-resync lines status as follows: bit 6|bit 7 -----|----- 0 | 0 KG-status O.K. disabled / disabled 1 | 0 KG-status ERR enabled / disabled 0 | 1 KG-status ERR disabled / enabled 1 | 1 KG-status ERR enabled / enabled .
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restPortMappedPhy 1.3.6.1.4.1.16.101.1.2.2.5.1.17
For virtual port addresses, returns the physical port that this address is mapped to. If the virtual port address is not mapped to a physical port, then 0.0.0 will be returned. For physical port addresses, returns the virtual port that is mapped to this port. If no virtual port is mapped to this physical port address, then 0.0.0 will be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restPortSdmFunction 1.3.6.1.4.1.16.101.1.2.2.5.1.18
Only applies to SDM ports (except SDM modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced)). The bit map is: bit 1 (lsb) - DSR if DTE, DTR if DCE bit 2 - DCD if DTE, RTS if DCE bit 3 - reserved bit 4 - CTS if DTE, reserved if DCE bit 5 - DTR if DTE, DSR if DCE bit 6 - RTS if DTE, DCD if DCE bit 7 - indicates functions are not applicable bit 8 - reserved if DTE, CTS if DCE Module types and subtypes that do not support this attribute will return a value of x40.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

restPortSdmTFunction 1.3.6.1.4.1.16.101.1.2.2.5.1.19
Only applies to SDM ports. bit 1 (lsb) - TM if DTE, LL if DCE bit 2 - reserved if DTE, RL if DCE bit 3 - reserved bit 4 - reserved bit 5 - LL if DTE, TM if DCE bit 6 - RL if DTE, reserved if DCE bit 7 - reserved bit 8 - indicates test functions are not applicable Module types and subtypes that do not support this attribute will return a value of x80. In addition, for the SDM, test functions will be not applicable (x80) if KG-resync is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

restPortBundleInTone 1.3.6.1.4.1.16.101.1.2.2.5.1.20
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

restPortSdmSignalStatus 1.3.6.1.4.1.16.101.1.2.2.5.1.21
Only applies to SDM ports on modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced). Otherwise it will return not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), los(2), losEvent(4), notApplicable(255)  

restPortSdmBipolarViolationInd 1.3.6.1.4.1.16.101.1.2.2.5.1.22
Only applies to SDM ports on modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced). Otherwise it will return not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER event(1), noEvent(2), notApplicable(255)  

restPortCapabilities 1.3.6.1.4.1.16.101.1.2.2.5.1.23
If this attribute is not applicable, the return value consists of octet string of size 1 with the value none (255). Currently supported only by SDM port. The interpretation of the octet string is listed below. For those capabilities specified using bit fields (module and port speed capabilities, as listed below), a value of one (1) means that the feature is supported, while zero (0) indicates that it is not supported. First byte: physical capabilities 01h - bulk (no separate connector for this port) 02h - 15 pin connector 03h - 25 pin connector 04h - RJ45 (8 pin modular) connector 05h - 75 ohm coax connector Second byte: electrical capabilities 01h - V.24 02h - V.35 04h - V.11 11h - E1 balanced 12h - E1 unbalanced 41h - 64K G.703 codirectional Third byte: module capabilities bit 1 (lsb) - supports redundancy bit 2 - supports loopback leads (RL, LL, and TM) bit 3 - supports LIM/DSC bit 4 - supports function leads (RTS, CTS, etc.) bits 5-8 - indicates clock modes 01h - supports DCE 02h - supports DTE 03h - supports DTE and DCE 04h - supports DTE1 only Fourth byte: port speed capabilities bit 1 (lsb) - various (supports multiple, user-programmable data rates on the ports) bit 2 - supports 64 kbps bit 3 - supports 1.544 Mbps bit 4 - supports 2.048 Mbps bits 5-8 - reserved for future use
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..4)  

restBundleTable 1.3.6.1.4.1.16.101.1.2.2.6
This section of the MIB does not support getNext. Creating (defining and then inserting) a new bundle out of available DS0s will not impact the existing bundles. Creating a new bundle out of DS0s currently belong to one or more other bundles will require that the affected bundles are removed and erased first. Expanding or shrinking an existing bundle is equivalent to the combination of erasing and then creating the bundle, as is changing the type of an existing bundle.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestBundleEntry

restBundleEntry 1.3.6.1.4.1.16.101.1.2.2.6.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestBundleEntry  

restBundleAddr 1.3.6.1.4.1.16.101.1.2.2.6.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  BundleAddr  

restBundleDiagnostics 1.3.6.1.4.1.16.101.1.2.2.6.1.2
Remove will free the bandwidth used by the bundle. If the bundle is an INL, then all channels connected over the INL will be disconnected. If the bundle is I/O, then that channel will be disconnected. The start mode of the bundle in the configuration MIB will be set to off. Insert only works on removed bundles (i.e., bundles whose status is unknown). It will get the new bundle configuration MIB and attempt to bring the bundle up. The start mode of the bundle in the configuration MIB will be set to automatic. Reset is equivalent to a remove followed by an insert, except that the start mode in the bundle configuration MIB will not be changed. Update will load in the new bundle configuration MIB without affecting the INL or channel on that bundle. It will fail if any intrusive parameters in the bundle configuration MIB have been changed.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER insert(4), remove(5), reset(6), update(7)  

restBundleStatus 1.3.6.1.4.1.16.101.1.2.2.6.1.3
The status is always enabled if the bundle is an INL. Unknown value means that the bundle is undefined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), unknown(50)  

restBundleBwCntStatus 1.3.6.1.4.1.16.101.1.2.2.6.1.4
Bandwidth contention status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), busy(3), unknown(50)  

restBundleMillwattSignalABCD 1.3.6.1.4.1.16.101.1.2.2.6.1.5
Controls the tone generator for PCM channels.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a0-b0-c0-d0(1), a0-b0-c0-d1(2), a0-b0-c1-d0(3), a0-b0-c1-d1(4), a0-b1-c0-d0(5), a0-b1-c0-d1(6), a0-b1-c1-d0(7), a0-b1-c1-d1(8), a1-b0-c0-d0(9), a1-b0-c0-d1(10), a1-b0-c1-d0(11), a1-b0-c1-d1(12), a1-b1-c0-d0(13), a1-b1-c0-d1(14), a1-b1-c1-d0(15), a1-b1-c1-d1(16), disable(255)  

restBundleDS0Map 1.3.6.1.4.1.16.101.1.2.2.6.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

restBundleSignalA 1.3.6.1.4.1.16.101.1.2.2.6.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notApplicable(255)  

restBundleSignalB 1.3.6.1.4.1.16.101.1.2.2.6.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notApplicable(255)  

restBundleSignalC 1.3.6.1.4.1.16.101.1.2.2.6.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notApplicable(255)  

restBundleSignalD 1.3.6.1.4.1.16.101.1.2.2.6.1.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notApplicable(255)  

restBundleOutSigA 1.3.6.1.4.1.16.101.1.2.2.6.1.11
This is not supported on T1M and E1M 4-port hardware configurationis
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notApplicable(255)  

restBundleOutSigB 1.3.6.1.4.1.16.101.1.2.2.6.1.12
This is not supported on T1M and E1M 4-port hardware configurationis
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notApplicable(255)  

restBundleOutSigC 1.3.6.1.4.1.16.101.1.2.2.6.1.13
This is not supported on T1M and E1M 4-port hardware configurationis
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notApplicable(255)  

restBundleOutSigD 1.3.6.1.4.1.16.101.1.2.2.6.1.14
This is not supported on T1M and E1M 4-port hardware configurationis
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2), notApplicable(255)  

restINLTable 1.3.6.1.4.1.16.101.1.2.2.7
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestINLEntry

restINLEntry 1.3.6.1.4.1.16.101.1.2.2.7.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestINLEntry  

restINLNumber 1.3.6.1.4.1.16.101.1.2.2.7.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..31  

restINLAddr 1.3.6.1.4.1.16.101.1.2.2.7.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  BundleAddr  

restINLDiagnostics 1.3.6.1.4.1.16.101.1.2.2.7.1.3
Remove will free bus bandwidth used by the INL, and disconnect all channels connected over the INL. It will also set the INL start mode in the configuration MIB to off. Insert on a removed INL will get the new MIB and software, and set the INL start mode in the configuration MIB to automatic. Reset is equivalent to a remove and insert, except it does not change the INL start mode in the configuration MIB. Restart will reestablish the INL without loading in the current INL configuration MIB. All channels connected over the INL will be disconnected. Update will load the non-intrusive parameters from the INL configuration MIB. If any intrusive parameters have been changed, then update will fail. Update will not affected the channels connected over the INL. Disable will prevent any new channel connections from being made over an INL. It will not affect existing channel connections. Enable on an disabled INL will allow new channel connections to be made over the INL.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2), insert(4), remove(5), reset(6), update(7), restart(79), setLoopback(9), clearLoopback(8), clearINLTotalCRCErrors(63), clearINLBERWindowFill(64)  

restINLStatus 1.3.6.1.4.1.16.101.1.2.2.7.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pending(33), inService(38), outOfService(39), maintenance(51)  

restINLSubStatus 1.3.6.1.4.1.16.101.1.2.2.7.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

restINLLocalBERLevel 1.3.6.1.4.1.16.101.1.2.2.7.1.6
BER level on the local node. If the local BER quality value is notCalculatedYet, then this attribute will return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restINLLocalBERQuality 1.3.6.1.4.1.16.101.1.2.2.7.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER accepted(1), unaccepted(2), notCalculatedYet(3)  

restINLRemoteNodeID 1.3.6.1.4.1.16.101.1.2.2.7.1.8
Node number that the INL terminates on. If no remote connection has been established, then this attribute will return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restINLRemotePortAddr 1.3.6.1.4.1.16.101.1.2.2.7.1.9
Port or bundle address that the INL terminates on. If no remote connection has been established, then this attribute will return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BundleAddr  

restINLRemoteINLID 1.3.6.1.4.1.16.101.1.2.2.7.1.10
INL ID on the remote node that the INL terminates on. If no remote connection has been established, then this attribute will return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

restINLRemoteBERLevel 1.3.6.1.4.1.16.101.1.2.2.7.1.11
BER level on the remote node that the INL terminates on. If the remote BER quality value is notCalculatedYet, then this attribute will return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

restINLRemoteBERQuality 1.3.6.1.4.1.16.101.1.2.2.7.1.12
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER accepted(1), unaccepted(2), notCalculatedYet(3)  

restINLAvailableTDMBw 1.3.6.1.4.1.16.101.1.2.2.7.1.13
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restINLAvailablePacketBw 1.3.6.1.4.1.16.101.1.2.2.7.1.14
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restINLLoopbackDuration 1.3.6.1.4.1.16.101.1.2.2.7.1.15
Value 65535 specifies a permanent loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

restINLLoopbackStatus 1.3.6.1.4.1.16.101.1.2.2.7.1.16
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), originator(2), terminator(3), external(4)  

restINLTotalCRCErrors 1.3.6.1.4.1.16.101.1.2.2.7.1.17
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restINLBERWindowFill 1.3.6.1.4.1.16.101.1.2.2.7.1.18
Format e.g. 10/32, 5/32.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..5)  

restINLNumTdmCh 1.3.6.1.4.1.16.101.1.2.2.7.1.19
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restINLNumFrCh 1.3.6.1.4.1.16.101.1.2.2.7.1.20
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restINLSpeed 1.3.6.1.4.1.16.101.1.2.2.7.1.21
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restINLNumSaf 1.3.6.1.4.1.16.101.1.2.2.7.1.22
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restINLLOSMode 1.3.6.1.4.1.16.101.1.2.2.7.1.23
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER localOutOfSync(1), localInSync(2), notApplicable(255)  

restINLBusFrameMode 1.3.6.1.4.1.16.101.1.2.2.7.1.24
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER addbackMode(1), fallbackMode(2), notApplicable(255)  

restINLContentsTable 1.3.6.1.4.1.16.101.1.2.2.8
This table lists all of the channels on a specified INL.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestINLContentsEntry

restINLContentsEntry 1.3.6.1.4.1.16.101.1.2.2.8.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestINLContentsEntry  

restINLContentsINLNumber 1.3.6.1.4.1.16.101.1.2.2.8.1.1
INL 32 is used to display local connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

restINLContentsSeqNumber 1.3.6.1.4.1.16.101.1.2.2.8.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

restINLContentsSourceNodeID 1.3.6.1.4.1.16.101.1.2.2.8.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restINLContentsSourceAddr 1.3.6.1.4.1.16.101.1.2.2.8.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restINLContentsDestNodeID 1.3.6.1.4.1.16.101.1.2.2.8.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restINLContentsDestAddr 1.3.6.1.4.1.16.101.1.2.2.8.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restChannel 1.3.6.1.4.1.16.101.1.2.2.9
OBJECT IDENTIFIER    

restChannelTable 1.3.6.1.4.1.16.101.1.2.2.9.1
This section of the MIB is defined for all types of channels. This section of the MIB will only support getNext for local channel addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestChannelEntry

restChannelEntry 1.3.6.1.4.1.16.101.1.2.2.9.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestChannelEntry  

restChannelStatusAddr 1.3.6.1.4.1.16.101.1.2.2.9.1.1.1
One of two channel address types: (1) Local channel address, where the channel originates and/or terminates on this node. The address specifies a channel endpoint that exists on this node using the format of the type ChannelAddr, with the remainder of the instance identifier set to zeros. (2) Bypass channel address, which can be used to obtain the status of a channel at a node that does not originate and/or terminate the channel. This format specifies the node ID and channel address of either the source or destination of the channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelStatusAddr  

restChannelSourceNodeID 1.3.6.1.4.1.16.101.1.2.2.9.1.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restChannelSourceAddr 1.3.6.1.4.1.16.101.1.2.2.9.1.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restChannelDestNodeID 1.3.6.1.4.1.16.101.1.2.2.9.1.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restChannelDestAddr 1.3.6.1.4.1.16.101.1.2.2.9.1.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restChannelDiagnostics 1.3.6.1.4.1.16.101.1.2.2.9.1.1.6
Reset will disconnect and then reconnect the specified channel. Set and clear loopback are the only controls that will accept a remote channel address (i.e., one consisting of a node number and channel address).
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER connect(35), disconnect(36), reset(6), setLoopback(9), clearLoopback(8)  

restChannelDirectNodeConnect 1.3.6.1.4.1.16.101.1.2.2.9.1.1.7
Connect the channel by selecting a route that passes through these specific nodes. Up to 17 node numbers can be specified. Each node number requires two bytes. For the channels originating on ST node and terminating on a LINK node there must be a delimiter, specifying the transition point between the ST node and LINK node defined. Such delimiter will be two byte long with 0xFFFF value.
Status: mandatory Access: write-only
OBJECT-TYPE    
  OCTET STRING Size(0..36)  

restChannelDirectPathConnect 1.3.6.1.4.1.16.101.1.2.2.9.1.1.8
Connect the channel using the specified route. For TDM and subrate channels, each hop of the path is indicates using three bytes. The first two bytes are the node number. The third byte identifies the INL that the channel passes through. For packet channels, each hop of the path is indicated using five bytes. The first two bytes are the node number. The third and fourth bytes are the nest and slot numbers, respectively, of the FSM that this packet channel passes through. The fifth number identifies the INL that the channel passes through. For all channel types, a maximum of 17 hops may be specified. For the channels originating on ST node and terminating on a LINK node there must be a delimiter, specifying the transition point between the ST path and LINK path defined. Since this applies only to TDM channels, such delimiter will be three byte long with 0xFFFFFF value.
Status: mandatory Access: write-only
OBJECT-TYPE    
  OCTET STRING Size(0..88)  

restChannelStatus 1.3.6.1.4.1.16.101.1.2.2.9.1.1.9
If the channel is disconnected, see recfTDMChannelDisconnect (for TDM and subrate channels) or recfFrChannelDisconnect (for packet channels) for the reason. If the channel is pending, then it is waiting for the end-to-end acknowledgement. All of the retry values indicate that the node is trying to connect the channel. Each individual value indicates why the channel connection has not succeeded yet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connecting(34), connected(35), disconnecting(37), loopback(9), retryNoServer(30), retryNoBW(41), retryNoRoute(42), retryNoDlci(132), retryDestIoUnusable(76), retryDestIoInUse(77), retryAuto(121), retryExceedShareBW(78), pending(33), disconnected(36)  

restChannelSubStatus 1.3.6.1.4.1.16.101.1.2.2.9.1.1.10
The waitForRTSAck value is only valid when the channel status is connecting. None value is valid for all channel status. The other values are only valid when the channel status is retryNoServer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER waitForRTSAck(55), noBypassServer(151), noSrcServer(152), noDestServer(153), noSrcSgmSaf(154), noDestSgmSaf(155), noSrcSgmScf(156), noDestSgmScf(157), noSrcAgmSaf(158), noDestAgmSaf(159), noSrcAgmScf(160), noDestAgmScf(161), noSrcAsmSaf(162), noDestAsmSaf(163), noSrcAsmScf(164), noDestAsmScf(165), noSrcLgmSaf(166), noDestLgmSaf(167), noSrcLgmScf(168), noDestLgmScf(169), noSrcRtmSaf(170), noDestRtmSaf(171), noSrcRtmScf(172), noDestRtmScf(173), noSrcVoicePort(174), noDestVoicePort(175), none(36)  

restChannelType 1.3.6.1.4.1.16.101.1.2.2.9.1.1.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), packet(2), subrate(4), trunkGroup(5), voice(9)  

restChannelBandwidth 1.3.6.1.4.1.16.101.1.2.2.9.1.1.12
Returns the badwidth value this channel occupies on the bus of an INL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restChannelBypassCount 1.3.6.1.4.1.16.101.1.2.2.9.1.1.13
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restChannelPath 1.3.6.1.4.1.16.101.1.2.2.9.1.1.14
DEPRECATED 2.0.1 For TDM and subrate channels, each hop of the path is indicates using three bytes. The first two bytes are the node number. The most significant bit of the first byte of the node number will be set to one if the channel is connected at a subrate speed and the node contains an SGM. The third byte identifies the INL that the channel passes through. For packet channels, each hop of the path is indicated using five bytes. The first two bytes are the node number. The third and fourth bytes are the nest and slot numbers, respectively, of the FSM that this packet channel passes through. The fifth number identifies the INL that the channel passes through.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..85)  

restChannelRouteQuality 1.3.6.1.4.1.16.101.1.2.2.9.1.1.15
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER asSpecified(57), overriden(56)  

restChannelConnectTime 1.3.6.1.4.1.16.101.1.2.2.9.1.1.16
Value is number of seconds since midnight January 1, 1970, GMT.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restChannelRetryCounter 1.3.6.1.4.1.16.101.1.2.2.9.1.1.17
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restChannelLoopbackNode 1.3.6.1.4.1.16.101.1.2.2.9.1.1.18
If a channel is in loopback, this field indicates which node the channel loopback has been set on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restChannelNodalSubratePath 1.3.6.1.4.1.16.101.1.2.2.9.1.1.19
Lists the path of a subrate channel within the node. The format for each segment is as follows: bytes 1-2: Node number if this is a remote address. If local address, this shall return zero. byte 3: Nest number of the segment. byte 4: Slot number of the segment. bytes 5-6: Port number of the segment. For SCFs, the most significant three bits will be set to 001. For SAFs, the most significant three bits will be set to 010. For CCFs, the most significant three bits will be set to 011. bytes 7-8: Element number of the segment. bytes 9-10: Module type of the segment. The values correspond the values of restSlotSWModuleType attribute. bytes 11-12: Channel phasor status. All bits zero indicates normal. Bit 1 indicates the least significant bit in the second octet. bit 1 - receive phasor underflow bit 2 - receive phasor overflow bit 3 - receive phasor empty bit 4 - receive phasor full bit 5 - receive phasor fifo error bit 6-7 are reserved bit 8 - receive phasor not applicable bit 9 - transmit phasor underflow bit 10 - transmit phasor overflow bit 11 - transmit phasor empty bit 12 - transmit phasor full bit 13 - transmit phasor fifo error bits 14-15 are reserved bit 16 - transmit phasor not applicable If the subrate segment does not have a channel phasor, then the value of this attribute will be x8080.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..96)  

restChannelDChOrigNode 1.3.6.1.4.1.16.101.1.2.2.9.1.1.20
INTRODUCED 2.0.0 This attribute indicates the node where the originating D-channel port is allocated. If a channel does not have any associated D-channels, then zero shall be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restChannelDChOrigAddr 1.3.6.1.4.1.16.101.1.2.2.9.1.1.21
INTRODUCED 2.0.0 This attribute indicates the originating D-channel port address. If a channel does not have any associated D-channels, then zero shall be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restChannelDChTermNode 1.3.6.1.4.1.16.101.1.2.2.9.1.1.22
INTRODUCED 2.0.0 This attribute indicates the node where the terminating D-channel port is allocated. If a channel does not have any associated D-channels, then zero shall be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restChannelDChTermAddr 1.3.6.1.4.1.16.101.1.2.2.9.1.1.23
INTRODUCED 2.0.0 This attribute indicates the terminating D-channel port address. If a channel does not have any associated D-channels, then zero shall be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restChannelLoopbackModAddr 1.3.6.1.4.1.16.101.1.2.2.9.1.1.24
INTRODUCED 2.0.0 This attribute is a supplement to the restChannelDiagnostics attribute. It specifies the address of the module that implements this loopback. If set to 0.0, then the default loopback setup is implemented.
Status: mandatory Access: read-write
OBJECT-TYPE    
  SlotAddr  

restChannelNetworkPath 1.3.6.1.4.1.16.101.1.2.2.9.1.1.25
INTRODUCED 2.0.1 This attribute represents all of the hops of a channel's route within an ST network or an ST-LINK hybrid network. The data for each hop consists of 12 bytes that are interpretted as follows: bytes 1-2: Node number. byte 3: Node information, bit mask interpretted as follows: bit 1: node has an SGM that is bypassing this channel bit 2: node has an LGM that is bypassing this channel bit 3: node is a LINK node bits 4-8: unused byte 4: Nest number of bypass module, or 0 if this channel does not have a bypass module in this node. Currently, this will only be non-zero for packet channels. byte 5: Slot number of bypass module, or 0 if this channel does not have a bypass module in this node. Currently, this will only be non-zero for packet channels. byte 6: Next hop type, integer value interpretted as follows: 0 - none (terminating node) 1 - INL 2 - LGM port (VILC) bytes 7-12: Next hop address. If next hop type is none, then bytes 7-12 are all zero. If next hop type is INL, then byte 7 is the INL number, and bytes 8-12 are all zero. If next hop type is LGM port, then bytes 7-12 are the LGM port address, with the same format as a channel address (server type, group, port, and element).
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..204)  

restPktChannelTable 1.3.6.1.4.1.16.101.1.2.2.9.2
This section of the MIB is only defined for frame relay channels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestPktChannelEntry

restPktChannelEntry 1.3.6.1.4.1.16.101.1.2.2.9.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestPktChannelEntry  

restPktChannelAddr 1.3.6.1.4.1.16.101.1.2.2.9.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restPktChannelDiagnostics 1.3.6.1.4.1.16.101.1.2.2.9.2.1.2
For enable packet test generator commands (local and remote), the channel should be put into loopback first using the setLoopback command in restChannelDiagnostics. The frame server will prepare the test packet, send it, and monitor the receiving results. It will keep statistics about the frames sent, frames received OK, frames received with errors, and frames that timed out. The disable packet test generator command will not clear the loopback on the channel, if one was initiated. The loopback needs to be cleared using restChannelDiagnostics. The disable packet ping command will stop the ping that was enabled using the attribute restPktChannelPingNumTimes.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER enablePktTestGenLocal(11), enablePktTestGenRemote(12), disablePktTestGen(13), disablePktPing(15)  

restPktChannelTestGenStatus 1.3.6.1.4.1.16.101.1.2.2.9.2.1.3
Specifies whether a test generator is currently active on this channel, and if so, whether it is local or remote.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER activeLocal(44), activeRemote(45), inactive(46)  

restPktChannelTestGenFrSent 1.3.6.1.4.1.16.101.1.2.2.9.2.1.4
Number of test generator frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restPktChannelTestGenFrRcvOK 1.3.6.1.4.1.16.101.1.2.2.9.2.1.5
Number of test generator frames received without any errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restPktChannelTestGenFrRcvErr 1.3.6.1.4.1.16.101.1.2.2.9.2.1.6
Number of test generator frames received with at least one error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restPktChannelTestGenFrTimeOut 1.3.6.1.4.1.16.101.1.2.2.9.2.1.7
Number of test generator frames sent that were not received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restPktChannelPingStatus 1.3.6.1.4.1.16.101.1.2.2.9.2.1.8
Specifies whether the channel is sending ping messages or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

restPktChannelPingNumTimes 1.3.6.1.4.1.16.101.1.2.2.9.2.1.9
Sets the number of times that the ping message should be sent on the frame relay channel, and enables the ping. The packet ping command is used to collect delay and congestion information on the packet channel without putting the channel into loopback. If zero is specified, then the server module will send ping messages until explicitly stopped using the disablePktPing command in restPktChannelDiagnostics. The restPktChPingTable section of the MIB supplies results of the ping on a per-hop basis. If ping is already enabled on this channel when this attribute is set, it will be ignored even though the command will return successfully.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER 0..255  

restPktChannelPingNumRemaining 1.3.6.1.4.1.16.101.1.2.2.9.2.1.10
Number of times that the ping message the ping message still has to be sent, when ping is active. If ping is inactive, or if the user requested the ping to continue until explicitly stopped, then this attribute will return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

restPktChannelCommStatus 1.3.6.1.4.1.16.101.1.2.2.9.2.1.11
INTRODUCED 2.0.0 This attribute indicates the status of the communication via this packet channel. It will return notApplicable for frame relay channels on FSM ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), notApplicable(255)  

restPktChPingTable 1.3.6.1.4.1.16.101.1.2.2.9.3
This section of the MIB is only defined for frame relay channels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestPktChPingEntry

restPktChPingEntry 1.3.6.1.4.1.16.101.1.2.2.9.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestPktChPingEntry  

restPktChPingAddr 1.3.6.1.4.1.16.101.1.2.2.9.3.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restPktChPingHopNumber 1.3.6.1.4.1.16.101.1.2.2.9.3.1.2
Identifies what hop of the channel path this information applies to. The first hop originates from the node that the ping was initiated on (this node will be referred to as the originating node). The last hop ends on the node where the opposite end of the channel is (this node will be referred to as the terminating node). The field restChannelPath can be used to identify where each hop is in the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..17  

restPktChPingDelay 1.3.6.1.4.1.16.101.1.2.2.9.3.1.3
Indicates the round trip delay in units of 10 millseconds between this node and the terminating node is.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restPktChPingOrigTermCong 1.3.6.1.4.1.16.101.1.2.2.9.3.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), yellow(2), red(3), critical(4)  

restPktChPingTermOrigCong 1.3.6.1.4.1.16.101.1.2.2.9.3.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), yellow(2), red(3), critical(4)  

restAd10Port 1.3.6.1.4.1.16.101.1.2.2.10
OBJECT IDENTIFIER    

restAd10AgmPortTable 1.3.6.1.4.1.16.101.1.2.2.10.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAd10AgmPortEntry

restAd10AgmPortEntry 1.3.6.1.4.1.16.101.1.2.2.10.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestAd10AgmPortEntry  

restAd10AgmPortAddr 1.3.6.1.4.1.16.101.1.2.2.10.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restAd10AgmPortControl 1.3.6.1.4.1.16.101.1.2.2.10.1.1.2
tdmMuxSwitch will force AD-10 port configured speeds to match ST values. It will then initiate a TDM mux switch on the AD-10. unitReset will reset the AD-10 unit. updateHw will update the remote AD-10 unit internal reference hardware configuration record. Use this to clear the condition when an AD-10 reference hardware alarm is generated.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER tdmMuxSwitch(1), unitReset(2), updateHw(3)  

restAd10AgmPortCpSpeed 1.3.6.1.4.1.16.101.1.2.2.10.1.1.3
Console terminal baud rate
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER a300(1), a1200(2), a2400(3), a9600(4)  

restAd10AgmPortCpTermType 1.3.6.1.4.1.16.101.1.2.2.10.1.1.4
Console terminal type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ascii(1), vt100(2)  

restAd10AgmPortCpMode 1.3.6.1.4.1.16.101.1.2.2.10.1.1.5
Console pass through mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(1)  

restAd10Date 1.3.6.1.4.1.16.101.1.2.2.10.1.1.6
Format is mm/dd/yyyy
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

restAd10Time 1.3.6.1.4.1.16.101.1.2.2.10.1.1.7
Format is hh:mm:ss
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

restAd10VersionLabel 1.3.6.1.4.1.16.101.1.2.2.10.1.1.8
Format: Vxx.yy DATE:mm-dd-yy The date is a date stamp on the version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(20)  

restAd10UnitSerialNumberStr 1.3.6.1.4.1.16.101.1.2.2.10.1.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..6)  

restAd10UnitType 1.3.6.1.4.1.16.101.1.2.2.10.1.1.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER atixSt50(6), accessPlus(7), ad10(8), universalType(9)  

restAd10HWConfig 1.3.6.1.4.1.16.101.1.2.2.10.1.1.11
Ad10 hardware configuration map. For each port on the Ad10 , there is a one-byte port type field followed by a five-byte user port address. The port type field may have the following values: 0x01: control processor 0x10: TDM composite 0x11: packet band 0x20: IOP data port 0x22: hybrid data module (HDM) data port 0x23: expansion data module (EDM) data port 0x32: VF51-64K VFAX 0x40: V.35/RS422 network port 0x41 V.11 network port The user port address will be an ASCII string displaying the port address as seen from the back panel of the Ad10. The index for the table is a virtual port address, range 1 to 64.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(384)  

restAd10NetworkInterface 1.3.6.1.4.1.16.101.1.2.2.10.1.1.12
Ad10 network port interface type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rs232(1), v35(2), rs422(3), v11(4)  

restAd10NetworkClockConf 1.3.6.1.4.1.16.101.1.2.2.10.1.1.13
Ad10 network port clock configuration
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER external(1), slave(2), internal(3)  

restAd10TdmMuxSwitchStatus 1.3.6.1.4.1.16.101.1.2.2.10.1.1.14
Status of the tdmMuxSwitch command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

restAd10SoftloadStatus 1.3.6.1.4.1.16.101.1.2.2.10.1.1.15
AD10 current softload status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER softloading(66), success(65), idle(36), responseTimeout(109), resetTimeout(110), infoIncorrect(111), ad10LinkDown(112)  

restAd10SoftloadFileSize 1.3.6.1.4.1.16.101.1.2.2.10.1.1.16
Total number of bytes to be softloaded. If no softloading is in progress returns zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restAd10SoftloadTransferred 1.3.6.1.4.1.16.101.1.2.2.10.1.1.17
Number of bytes that have been transferred currently. If no softloading is in progress returns zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restAd10SoftloadStartTime 1.3.6.1.4.1.16.101.1.2.2.10.1.1.18
Value is number of seconds since midnight January 1, 1970, GMT. Value of 0 means not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restAd10SoftloadCompletionTime 1.3.6.1.4.1.16.101.1.2.2.10.1.1.19
Value is number of seconds since midnight January 1, 1970, GMT. Value of 0 means not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restAd10DataPortTable 1.3.6.1.4.1.16.101.1.2.2.10.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAd10DataPortEntry

restAd10DataPortEntry 1.3.6.1.4.1.16.101.1.2.2.10.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestAd10DataPortEntry  

restAd10DataPortAddr 1.3.6.1.4.1.16.101.1.2.2.10.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ad10PortAddr  

restAd10DataPortDiagnostics 1.3.6.1.4.1.16.101.1.2.2.10.2.1.2
Insert will download the new MIB to the module. It will not synchronize any configuration parameters between the AD-10 and the NCP. Remove will disconnect the connected channel. It will not erase the configuration MIB. Reset in essence is a remove following by an insert. It will also cause the AGM to force the AD-10 data port speed and type to match the values set on the NCP.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER insert(4), remove(5), reset(6)  

restAd10DataPortMode 1.3.6.1.4.1.16.101.1.2.2.10.2.1.3
Online/offline and diagnostic mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER offline(1), online(2), disableDiagnostics(3), bertTowardSubscriber(4), bertTowardNetwork(5), loopSubscriber(6), loopNetwork(7)  

restAd10DataPortIntfType 1.3.6.1.4.1.16.101.1.2.2.10.2.1.4
Interface type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rs232(1), v35(2), rs422(3), v11(4)  

restAd10DataPortClockMode 1.3.6.1.4.1.16.101.1.2.2.10.2.1.5
Clock mode. Only TDM sync can use a value of derived. If port is async, notApplicable will be returned. The notApplicable value should not be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notApplicable(1), internal(2), external(3), txExternal(4), derived(5)  

restAd10DataPortClockRate 1.3.6.1.4.1.16.101.1.2.2.10.2.1.6
Clock rate, in units of 100 bps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..20480  

restAd10DataPortCtsOOS 1.3.6.1.4.1.16.101.1.2.2.10.2.1.7
CTS out of service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forceOff(1), forceOn(2), freeze(3)  

restAd10DataPortCtsSig 1.3.6.1.4.1.16.101.1.2.2.10.2.1.8
CTS setup
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forceOff(1), forceOn(2), loopLocalRts(3), loopLocalDtr(4), rts(5), dtr(6), rtsAndDtr(7), rtsOrDtr(8)  

restAd10DataPortDcdOOS 1.3.6.1.4.1.16.101.1.2.2.10.2.1.9
DCD out of service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forceOff(1), forceOn(2), freeze(3)  

restAd10DataPortDcdSig 1.3.6.1.4.1.16.101.1.2.2.10.2.1.10
DCD setup
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forceOff(1), forceOn(2), loopLocalRts(3), loopLocalDtr(4), rts(5), dtr(6), rtsAndDtr(7), rtsOrDtr(8)  

restAd10DataPortDsrOOS 1.3.6.1.4.1.16.101.1.2.2.10.2.1.11
DSR out of service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forceOff(1), forceOn(2), freeze(3)  

restAd10DataPortDsrSig 1.3.6.1.4.1.16.101.1.2.2.10.2.1.12
DSR setup
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER forceOff(1), forceOn(2), loopLocalRts(3), loopLocalDtr(4), rts(5), dtr(6), rtsAndDtr(7), rtsOrDtr(8)  

restAd10DataPortRtsLoopDelay 1.3.6.1.4.1.16.101.1.2.2.10.2.1.13
RTS loopback delay number in units of milli-seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

restAd10DataPortDtrLoopDelay 1.3.6.1.4.1.16.101.1.2.2.10.2.1.14
DTR loopback delay number in units of milli-seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

restAd10DataPortAsyncDataBits 1.3.6.1.4.1.16.101.1.2.2.10.2.1.15
Asynchronous data bits configuration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b5bit(1), b6bit(2), b7bit(3), b8bit(4)  

restAd10DataPortAsyncStopBits 1.3.6.1.4.1.16.101.1.2.2.10.2.1.16
Asynchronous stop bits configuration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), oneAndHalf(2), two(3)  

restAd10DataPortAsyncParity 1.3.6.1.4.1.16.101.1.2.2.10.2.1.17
Asynchronous parity configuration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), even(2), odd(3)  

restAd10DataPortAsyncSubMode 1.3.6.1.4.1.16.101.1.2.2.10.2.1.18
Asynchronous parity error substitute mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

restAd10DataPortAsyncSubChar 1.3.6.1.4.1.16.101.1.2.2.10.2.1.19
Asynchronous parity error substitute character
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

restAd10DataPortPktFlowControl 1.3.6.1.4.1.16.101.1.2.2.10.2.1.20
Flow control mechanism (for async only)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ctsDtr(1), xonXoff(2)  

restAd10DataPortPktTxFlow 1.3.6.1.4.1.16.101.1.2.2.10.2.1.21
Transmit flow
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

restAd10DataPortPktRxFlow 1.3.6.1.4.1.16.101.1.2.2.10.2.1.22
Receive flow
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

restAd10DataPortPktBuildTimeOut 1.3.6.1.4.1.16.101.1.2.2.10.2.1.23
Build packet time out (in units of 10 milliseconds) (for async only)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

restAd10DataPortPktRxThreshold 1.3.6.1.4.1.16.101.1.2.2.10.2.1.24
Receive threshold. Receive buffer capacity beyond the threshold, the flow control signal will send toward the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

restAd10DataPortPktTxThreshold 1.3.6.1.4.1.16.101.1.2.2.10.2.1.25
Transmit threshold. Transmit buffer capacity beyond the threshold, the flow control signal will send toward the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

restAd10DataPortPktMinRxFrag 1.3.6.1.4.1.16.101.1.2.2.10.2.1.26
Minimum receive fragment threshold. Specifies the minimum number received fragments of packet from the network before sending toward DTE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..200  

restAd10DataPortBiSyncCharType 1.3.6.1.4.1.16.101.1.2.2.10.2.1.27
Bisync character type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ascii7(1), ascii8(2), ebcdic(3)  

restAd10DataPortBiSyncParity 1.3.6.1.4.1.16.101.1.2.2.10.2.1.28
Bisync parity
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER high(1), low(2), even(3), odd(4), notApplicable(255)  

restAd10DataPortBiSyncIdleFill 1.3.6.1.4.1.16.101.1.2.2.10.2.1.29
Bisync idle fill
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), sync(2)  

restAd10DataPortBiSyncMinPair 1.3.6.1.4.1.16.101.1.2.2.10.2.1.30
Bisync minimum sync pair. Minimum number of sync character pair that precedes a packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

restAd10DataPortBiSyncSyncChar 1.3.6.1.4.1.16.101.1.2.2.10.2.1.31
Bisync sync character. Default is 32h for EBCDIC and 16h for ASCII 7 and 8.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

restAd10DataPortBiSyncPadChar 1.3.6.1.4.1.16.101.1.2.2.10.2.1.32
Bisync pad character. Default is 0xff for EBCDIC and ASCII 8 and 0x7f for ASCII 7.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

restAd10DataPortHdlcCrcType 1.3.6.1.4.1.16.101.1.2.2.10.2.1.33
CRC type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER crc16(1), crc32(2)  

restAd10DataPortHdlcLineCode 1.3.6.1.4.1.16.101.1.2.2.10.2.1.34
Line code
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nrz(1), nrzi(2)  

restAd10DataPortHdlcIdleFill 1.3.6.1.4.1.16.101.1.2.2.10.2.1.35
Idle fill
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), flag(2)  

restAd10DataPortHdlcMinFlags 1.3.6.1.4.1.16.101.1.2.2.10.2.1.36
Minimum flags between frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

restAd10DataPortModemSigInfo 1.3.6.1.4.1.16.101.1.2.2.10.2.1.37
Modem signal info. Bit map. bit 1 (lsb) - RTS bit 2 - DTR bit 3 - CTS bit 4 - DCD bit 5 - DSR
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

restAd10DataPortVcMapDlci 1.3.6.1.4.1.16.101.1.2.2.10.2.1.38
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1023  

restAd10DataPortVcMapCir 1.3.6.1.4.1.16.101.1.2.2.10.2.1.39
Committed information rate (in units of 100 bps)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1280  

restAd10DataPortTDMDataRate 1.3.6.1.4.1.16.101.1.2.2.10.2.1.40
This attribute must match the value in recfAd10DataPortTDMDataRate. If it does not match, the reset AD-10 data port command can be used to synchronize them.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER b1200(9), b2400(18), b4800(36), b7200(54), b9600(72), b12000(90), b14400(108), b16000(120), b16800(126), b19200(144), b24000(180), b28800(216), b32000(240), b38400(288), b48000(360), b56000(420), disabled(65535)  

restAd10DataPortType 1.3.6.1.4.1.16.101.1.2.2.10.2.1.41
This attribute must match the value in recfAd10DataPortType. If it does not match, the reset AD-10 data port command can be used to synchronize them.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tdm-sync(1), stat-mux-async(2), bisync(3), hdlc(4)  

restAd10DataPortDtrFlLpDlyDelta 1.3.6.1.4.1.16.101.1.2.2.10.2.1.42
INTRODUCED 1.2.3 Dtr falling edge (going from high to low) delay is this attribute + restAd10DataPortDtrLoopDelay
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

restAd10DataPortRtsFlLpDlyDelta 1.3.6.1.4.1.16.101.1.2.2.10.2.1.43
INTRODUCED 1.2.3 Rts falling edge (going from high to low) delay is this attribute + restAd10DataPortRtsLoopDelay
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

restAd10VoicePortTable 1.3.6.1.4.1.16.101.1.2.2.10.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAd10VoicePortEntry

restAd10VoicePortEntry 1.3.6.1.4.1.16.101.1.2.2.10.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestAd10VoicePortEntry  

restAd10VoicePortAddr 1.3.6.1.4.1.16.101.1.2.2.10.3.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ad10PortAddr  

restAd10VoicePortDiagnostics 1.3.6.1.4.1.16.101.1.2.2.10.3.1.2
Insert will download the new MIB to the module. It will not synchronize any configuration parameters between the AD-10 and the NCP. Remove will disconnect the connected channel. It will not erase the configuration MIB. Reset in essence is a remove following by an insert. It will also cause the AGM to force the AD-10 voice port speed, compression mode, and fax mode to match the values set on the NCP.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER insert(4), remove(5), reset(6)  

restAd10VoicePortMode 1.3.6.1.4.1.16.101.1.2.2.10.3.1.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER offline(1), online(2), disableDiagnosis(3), subDMW(4), bertTowardNetwork(5), loopSub(6), loopNet(7)  

restAd10VoicePortInterface 1.3.6.1.4.1.16.101.1.2.2.10.3.1.4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fxo(1), fxsGndStartContRing(5), fxsGndStartInterRing(6), fxsLoopStartContRing(7), fxsLoopStartInterRing(8), emTypeI(9), emTypeII(10), emTypeIII(11), emTypeIV(12), emTypeV(13), ac15(14), ss5(15)  

restAd10VoicePortEchoCancel 1.3.6.1.4.1.16.101.1.2.2.10.3.1.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

restAd10VoicePortToneMode 1.3.6.1.4.1.16.101.1.2.2.10.3.1.6
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

restAd10VoicePortNonLinear 1.3.6.1.4.1.16.101.1.2.2.10.3.1.7
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), disable(1)  

restAd10VoicePortEMPolarity 1.3.6.1.4.1.16.101.1.2.2.10.3.1.8
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reverse(1), normal(2), notApplicable(255)  

restAd10VoicePortUncfgCktSig 1.3.6.1.4.1.16.101.1.2.2.10.3.1.9
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), busy(2)  

restAd10VoicePortHookStateRx 1.3.6.1.4.1.16.101.1.2.2.10.3.1.10
Phone on/off hook status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

restAd10VoicePortHookStateTx 1.3.6.1.4.1.16.101.1.2.2.10.3.1.11
Phone on/off hook status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

restAd10VoicePortTxLevel 1.3.6.1.4.1.16.101.1.2.2.10.3.1.12
-25.4db to +25.4db w/.2db increment
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

restAd10VoicePortRcvLevel 1.3.6.1.4.1.16.101.1.2.2.10.3.1.13
-25.4db to +25.4db w/.2db increment
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

restAd10VoicePortTermination 1.3.6.1.4.1.16.101.1.2.2.10.3.1.14
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER r600ohms(1), r900ohmsOrComplex(2)  

restAd10VoicePortWire 1.3.6.1.4.1.16.101.1.2.2.10.3.1.15
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER w4wire(1), w2wire(2), notApplicable(255)  

restAd10VoicePortAc15Dial 1.3.6.1.4.1.16.101.1.2.2.10.3.1.16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dtmf(1), pulse(2), notApplicable(255)  

restAd10VoicePortTelcoIntType 1.3.6.1.4.1.16.101.1.2.2.10.3.1.17
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER us(1), babt(2), austel(3)  

restAd10VoicePortSpeed 1.3.6.1.4.1.16.101.1.2.2.10.3.1.18
The compressed channel data rate for this AD-10 voice port. This attribute must match the value in recfAd10VoicePortSpeed. If it does not match, the reset AD-10 voice port command can be used to synchronize them. For ports using a CELP compression algorithm, only speeds of 5.333 Kbps, 7.2 Kbps, 8 Kbps, and 9.6 Kbps will be supported. For ports using the ATC compression algorithm, only the speeds between 7.466 Kbps and 32 Kbps will be supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER b5333(40), b7200(54), b7466(56), b8000(60), b8533(64), b9066(68), b9600(72), b10133(76), b10666(80), b11200(84), b11733(88), b12266(92), b12800(96), b13333(100), b13866(104), b14400(108), b14933(112), b15466(116), b16000(120), b16533(124), b17066(128), b17600(132), b18133(136), b18666(140), b19200(144), b19733(148), b20266(152), b20800(156), b21333(160), b21866(164), b22400(168), b22933(172), b23466(176), b24000(180), b24533(184), b25066(188), b25600(192), b26133(196), b26666(200), b27200(204), b27733(208), b28266(212), b28800(216), b29333(220), b29866(224), b30400(228), b30933(232), b31466(236), b32000(240), disabled(65535)  

restAd10VoicePortCompressMode 1.3.6.1.4.1.16.101.1.2.2.10.3.1.19
This attribute must match the value in recfAd10VoicePortCompressMode. If it does not match, the reset AD-10 voice port command can be used to synchronize them.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tCelp(1), atc(2)  

restAd10VoicePortFaxMode 1.3.6.1.4.1.16.101.1.2.2.10.3.1.20
This attribute must match the value in recfAd10VoicePortFaxMode. If it does not match, the reset AD-10 voice port command can be used to synchronize them.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER faxIIIenable-NSFenable(1), faxIIIenable-NSFdisable(2), faxIIIdisable-NSFdontcare(3)  

restAd10VoicePortOOSAudio 1.3.6.1.4.1.16.101.1.2.2.10.3.1.21
INTRODUCED 1.2.3 OOS audio signal for AD-10 voice ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fastBusy(1), silence(2)  

restAd10VoicePortCelpNetSigMd 1.3.6.1.4.1.16.101.1.2.2.10.3.1.22
INTRODUCED 2.0.0 Enable autodetection of CELP/ATC channel connected equipment so as to automatically change format to become compatible with either LINK (5 byte) or ST (8 byte) channel mode. Alternately, this parameter hard sets CELP/ATC channels to be compatible only with either LINK or ST mode compatible equipment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), st(2), link(3)  

restAd10VoicePortCelpNetSigSt 1.3.6.1.4.1.16.101.1.2.2.10.3.1.23
INTRODUCED 2.0.0 When restAd10VoiceTrkGrpCelpNetSigMd attribute is set to auto (autodetection mode), this parameter indicates whether the CELP/ATC channel connected is running in either LINK (5 byte) or ST (8 byte) mode. If the channel is not connected, if it is running some other type of voice, or if the channel is not currently maintaining validated channel signaling synchronization, then this parameter will indicate indeterminate. If autodetection is disabled, this parameter reflects the value of restAd10VoiceTrkGrpCelpNetSigMd attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER indeterminate(1), st(2), link(3)  

restAd10PktBandTable 1.3.6.1.4.1.16.101.1.2.2.10.4
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAd10PktBandEntry

restAd10PktBandEntry 1.3.6.1.4.1.16.101.1.2.2.10.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestAd10PktBandEntry  

restAd10PktBandAddr 1.3.6.1.4.1.16.101.1.2.2.10.4.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ad10PortAddr  

restAd10PktBandDiagnostics 1.3.6.1.4.1.16.101.1.2.2.10.4.1.2
Insert will download the new MIB to the module. It will not synchronize any configuration parameters between the AD-10 and the NCP. Remove will disconnect the connected channel. It will not erase the configuration MIB. Reset in essence is a remove following by an insert. It will also cause the AGM to force the AD-10 packet band speed to match the values set on the NCP.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER insert(4), remove(5), reset(6)  

restAd10PktBandStatMuxMode 1.3.6.1.4.1.16.101.1.2.2.10.4.1.3
DEPRECATED 2.0 Online/offline and diagnosis mode.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER offline(1), online(2), disableDiagnosis(3), bertTowardSub(4), bertTowardNetwork(5), loopSub(6), loopNet(7)  

restAd10PktBandMaxSegSize 1.3.6.1.4.1.16.101.1.2.2.10.4.1.4
Maximum frame size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b64bytes(1), b256bytes(2)  

restAd10PktBandBaudRate 1.3.6.1.4.1.16.101.1.2.2.10.4.1.5
This attribute must match the value in recfAd10PktBandBaudRate. If it does not match, the reset AD-10 packet band command can be used to synchronize them. If recfAd10PktBandDBAMode is enabled, the rate should be equal to the rate of the AD10 aggregrate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER b1200(9), b1334(10), b1600(12), b1867(14), b2000(15), b2134(16), b2400(18), b2667(20), b2800(21), b3200(24), b3600(27), b3734(28), b4000(30), b4267(32), b4667(35), b4800(36), b5334(40), b5600(42), b6000(45), b6400(48), b7200(54), b7467(56), b8000(60), b8400(63), b9334(70), b9600(72), b10667(80), b11200(84), b12000(90), b12800(96), b14000(105), b14400(108), b14934(112), b16000(120), b16800(126), b18000(135), b18667(140), b19200(144), b21334(160), b22400(168), b24000(180), b25200(189), b28000(210), b28800(216), b29867(224), b32000(240), b33600(252), b36000(270), b37334(280), b38400(288), b42000(315), b44800(336), b48000(360), b50400(378), b56000(420), b57600(432), b64000(480), b67200(504), b72000(540), b74667(560), b84000(630), b89600(672), b96000(720), b100800(756), b112000(840), b115200(864), b126000(945), b128000(960), disabled(65535)  

restAd10PktBandMinBandwidth 1.3.6.1.4.1.16.101.1.2.2.10.4.1.6
Returns the value of the packet band port bandwidth with all configured DBA voice ports off-hook. The units of this value are 400/3 Hz.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restAd10PktBandCurBandwidth 1.3.6.1.4.1.16.101.1.2.2.10.4.1.7
Returns the current value of the packet band port bandwidth. The units of this value are 400/3 Hz.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restAd10PktBandMaxBandwidth 1.3.6.1.4.1.16.101.1.2.2.10.4.1.8
Returns the value of the packet band port bandwidth with all configured DBA voice ports on-hook. The units of this value are 400/3 Hz.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restAsmPort 1.3.6.1.4.1.16.101.1.2.2.11
OBJECT IDENTIFIER    

restAsmX50Table 1.3.6.1.4.1.16.101.1.2.2.11.1
OBJECT IDENTIFIER    

restAsmX50PortTable 1.3.6.1.4.1.16.101.1.2.2.11.1.1
This section of the MIB does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAsmX50PortEntry

restAsmX50PortEntry 1.3.6.1.4.1.16.101.1.2.2.11.1.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestAsmX50PortEntry  

restAsmX50PortAddr 1.3.6.1.4.1.16.101.1.2.2.11.1.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restAsmX50PortEngine 1.3.6.1.4.1.16.101.1.2.2.11.1.1.1.2
Indicates which DSP on the ASM module the port has been allocated to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

restAsmX50PortRxHouseKbits 1.3.6.1.4.1.16.101.1.2.2.11.1.1.1.3
bit housekeeping bit 0 (lsb) 'H' 1 'G' 2 'F' 3 'E' 4 'D' 5 'C' 6 'B' 7 not used
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

restAsmX50PortCktTimeSlotMap 1.3.6.1.4.1.16.101.1.2.2.11.1.1.1.4
Each byte 1-20 indicates which circuit is using that time slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(20)  

restAsmX50PortAggrStatus 1.3.6.1.4.1.16.101.1.2.2.11.1.1.1.5
Specific ASM X50 status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pending(1), inSync(2), los(4), ros(6), losRos(8), oos(16), loopback(17)  

restAsmX50CkTable 1.3.6.1.4.1.16.101.1.2.2.11.1.2
This section of the MIB does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAsmX50CkEntry

restAsmX50CkEntry 1.3.6.1.4.1.16.101.1.2.2.11.1.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestAsmX50CkEntry  

restAsmX50CkAddr 1.3.6.1.4.1.16.101.1.2.2.11.1.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsmX50CkAddr  

restAsmX50CkDiagnostics 1.3.6.1.4.1.16.101.1.2.2.11.1.2.1.2
Insert will download the new MIB to the module and set the start mode in the configuration MIB to automatic. Remove will disconnect the connected channel and change the start mode in the configuration MIB to off. It will not erase the configuration MIB. Reset in essence is a remove following by an insert. However, it will not change the start mode in the configuration MIB.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER insert(4), remove(5), reset(6)  

restAsmX50CkSbitStatus 1.3.6.1.4.1.16.101.1.2.2.11.1.2.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER one(1), zero(2)  

restAsmX50CkPhasorStatus 1.3.6.1.4.1.16.101.1.2.2.11.1.2.1.4
All bits zero indicates normal. bit 1 (lsb) indicates receive phasor underflow bit 2 indicates receive phasor overflow bit 3 indicates receive phasor empty bit 4 indicates receive phasor full bit 5 indicates receive phasor fifo error bits 6-7 are reserved bit 8 indicates receive phasor not applicable bit 9 indicates transmit phasor underflow bit 10 indicates transmit phasor overflow bit 11 indicates transmit phasor empty bit 12 indicates transmit phasor full bit 13 indicates transmit phasor fifo error bits 14-15 are reserved bit 16 indicates transmit phasor not applicable If circuit does not have a phasor, the return value will be x8080.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restAsmVoice 1.3.6.1.4.1.16.101.1.2.2.11.2
OBJECT IDENTIFIER    

restAsmVoicePortTable 1.3.6.1.4.1.16.101.1.2.2.11.2.1
This section of the MIB doesn't support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestAsmVoicePortEntry

restAsmVoicePortEntry 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestAsmVoicePortEntry  

restAsmVoicePortChannelAddr 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.1
Address of T1M/E1M bundle which is being used by this port while connected. If disconnected returns error
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restAsmVoicePortAddr 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.2
ASM voice port physical address in nest:slot:port format
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restAsmVoicePortTrkGrpAddr 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.3
Trunk group address this ASM voice port is assigned to
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restAsmVoicePortEngine 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.4
The ASM module DSP number allocated for this voice port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

restAsmVoicePortPacketSize 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.5
Size of compressed data block. This field is not supported in this release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 20..60  

restAsmVoicePortBlockSize 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.6
Size of uncompressed data block. This field is not supported in this release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 120..240  

restAsmVoicePortEchoCanceller 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.7
The bit mask is: bit 0(lsb)divergence (0-normal, 1-diverge) bit 1 reserved bit 2 filter (0-disabled, 1-enabled) bit 3 adaptation (0-frosen, 1-adapting) bit 4 reserved bit 5 reserved bit 6 reserved bit 7(msb)reserved This field is not supported in this release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

restAsmVoicePortDTMFRelay 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.8
The bit mask is: bits 0(lsb)-3 detected character 0 - 9 digit 0 through 9 10 character '*' 11 character '#' 12-15 characters 'A' through 'D' bits 4,5 digit type (00 - DTMF) bit 6 digit generation (0-off, 1-on) bit 7(msb)digit detect (0-none, 1-detected) This field is not supported in this release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

restAsmVoicePortFaxRelay 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.9
The bit mask is: bits 0(lsb)-4 modulation type 0 V.21 300 bps 1 V.27 2400 bps 2 V.27 4800 bps 3 V.29 7200 bps 4 V.29 9600 bps bit 5 reserved bit 6 demodulation (0-off, 1-on) bit 7(msb)modulation (0-off, 1-on) This field is not supported in this release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

restAsmVoicePortPacket 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.10
The bit mask is: bit 0(lsb)sync init (1-initializing) bit 1 sync acq (1-sync searching) bit 2 sync ver (1-verifying sync) bit 3 sync mon (1-normal) bit 4 sync loss (1-frame sync loss) bit 5 sync loss time-out (1-occured) bit 6 reserved bit 7(msb)HBER (1-BER > 10) This field is not supported in this release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

restAsmVoicePortSubratePhasor 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.11
All bits zero indicates normal. bit 1(lsb)receive phasor underflow bit 2 receive phasor overflow bit 3-8 are reserved bit 9 transmit phasor underflow bit 10 transmit phasor overflow bit 11-16 are reserved If port does not have a phasor, the return value will be x8080.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restAsmVoicePortSignalingLOS 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.12
Signaling LOS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inSync(1), los(2)  

restAsmVoicePortFrameLOS 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.13
Frame LOS status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inSync(1), los(2)  

restAsmVoicePortCelpNetSigSt 1.3.6.1.4.1.16.101.1.2.2.11.2.1.1.14
INTRODUCED 2.0.0 When recfAsmVoiceTrkGrpCelpNetSigMd attribute is set to auto (autodetection mode), this parameter indicates whether the CELP/ATC channel connected is running in either LINK (5 byte) or ST (8 byte) mode. If the channel is not connected, if it is running some other type of voice, or if the channel is not currently maintaining validated channel signaling synchronization, then this parameter will indicate indeterminate. If autodetection is disabled, this parameter reflects the value of recfAsmVoiceTrkGrpCelpNetSigMd attribute. Note: this parameter may take the place of a currently unused, but similarly intended restAsmVoicePortPacketSize attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER indeterminate(1), st(2), link(3)  

restTrunkGroup 1.3.6.1.4.1.16.101.1.2.2.12
OBJECT IDENTIFIER    

restTrkGrpTable 1.3.6.1.4.1.16.101.1.2.2.12.1
This section of the MIB is intended to use for any trunk groups status defined. It doesn't support getNext. This section is not supported in this release.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestTrkGrpEntry

restTrkGrpEntry 1.3.6.1.4.1.16.101.1.2.2.12.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestTrkGrpEntry  

restTrkGrpAddr 1.3.6.1.4.1.16.101.1.2.2.12.1.1.1
Address of the trunk group
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restTrkGrpStatus 1.3.6.1.4.1.16.101.1.2.2.12.1.1.2
The current trunk group status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

restTrkGrpContentsTable 1.3.6.1.4.1.16.101.1.2.2.12.2
This section of the MIB specify all the contents of the trunk groups status defined. It partially supports getNext (only within trunk group). This section is not supported in this release.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestTrkGrpContentsEntry

restTrkGrpContentsEntry 1.3.6.1.4.1.16.101.1.2.2.12.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestTrkGrpContentsEntry  

restTrkGrpContentsAddr 1.3.6.1.4.1.16.101.1.2.2.12.2.1.1
Address of the trunk group
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restTrkGrpContentsSequenceID 1.3.6.1.4.1.16.101.1.2.2.12.2.1.2
Used to index multiple ports assigned to this trunk group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

restTrkGrpContentsSrcNodeID 1.3.6.1.4.1.16.101.1.2.2.12.2.1.3
Source node ID of the current channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restTrkGrpContentsSrcTrkGrpAddr 1.3.6.1.4.1.16.101.1.2.2.12.2.1.4
Source truk group address of the current channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restTrkGrpContentsSrcChAddr 1.3.6.1.4.1.16.101.1.2.2.12.2.1.5
Source end point address of the current channel (T1M/E1M port) using this trunk group. When disconnected returns an error
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restTrkGrpContentsDstNodeID 1.3.6.1.4.1.16.101.1.2.2.12.2.1.6
Destination node ID of the current channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restTrkGrpContentsDstTrkGrpAddr 1.3.6.1.4.1.16.101.1.2.2.12.2.1.7
Destination truk group address of the current channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restTrkGrpContentsDstChAddr 1.3.6.1.4.1.16.101.1.2.2.12.2.1.8
Destination end point address of the current channel (T1M/E1M port) using this trunk group. When disconnected returns an error
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restRtmPort 1.3.6.1.4.1.16.101.1.2.2.13
OBJECT IDENTIFIER    

restRtmPortTable 1.3.6.1.4.1.16.101.1.2.2.13.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestRtmPortEntry

restRtmPortEntry 1.3.6.1.4.1.16.101.1.2.2.13.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestRtmPortEntry  

restRtmPortAddr 1.3.6.1.4.1.16.101.1.2.2.13.1.1.1
RTM port physical address in nest:slot:port format
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restRtmPortAdFmtRevision 1.3.6.1.4.1.16.101.1.2.2.13.1.1.2
Format revision of the ADx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restRtmPortAdType 1.3.6.1.4.1.16.101.1.2.2.13.1.1.3
Type of the Adx unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ad3(2), ad7(3)  

restRtmPortAdSubtype 1.3.6.1.4.1.16.101.1.2.2.13.1.1.4
In case of integralInt all interfaces are V24 (AD-3I/AD-7I subtype). In case of daughterBrdInt the interface type is determined by reading restRtmAdPortElIntStatus MIB attribute (AD-3N/AD-7N subtype). In case of sipexChipInt the interface type may be programmed by the user (is not supported in this release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER integralInt(1), daughterBrdInt(2), sipexChipInt(3)  

restRtmPortAdAssemblyNmb 1.3.6.1.4.1.16.101.1.2.2.13.1.1.5
ADx unit assembly number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

restRtmPortAdMotherBrdAssmNmb 1.3.6.1.4.1.16.101.1.2.2.13.1.1.6
Motherboard assembly number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

restRtmPortAdSerialNmb 1.3.6.1.4.1.16.101.1.2.2.13.1.1.7
ADx unit serial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

restRtmPortAdManufactDate 1.3.6.1.4.1.16.101.1.2.2.13.1.1.8
ADx unit manufacturing date.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

restRtmPortAdRamSize 1.3.6.1.4.1.16.101.1.2.2.13.1.1.9
ADx unit RAM size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restRtmPortAdModDiagResult 1.3.6.1.4.1.16.101.1.2.2.13.1.1.10
ADx unit internal diagnostics result. The bit mask is: bit 0 (LSB) RAM test bit 1 U-interface D-channel loopback test bit 2 SCC-chip D-channel loopback test bit 3 U-interface loopback test bit 4 CPI loopback test bit 5 PROM ID checksum bit 6 Port status checksum bit 7-15 (MSB) reserved. The bit value 1 means test failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restRtmPortAdPortDiagResult 1.3.6.1.4.1.16.101.1.2.2.13.1.1.11
ADx port internal diagnostics result. The bit mask is read from right (LSB) to left (MSB) and represents corresponding elements numbers.If bit is set to 1 the diagnostics failed, if 0 - passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restRtmPortAdCpMode 1.3.6.1.4.1.16.101.1.2.2.13.1.1.12
CPI console pass through mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

restRtmPortAdCpSpeed 1.3.6.1.4.1.16.101.1.2.2.13.1.1.13
CPI console speed value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER a9600(1), a19200(2)  

restRtmAdPortTable 1.3.6.1.4.1.16.101.1.2.2.13.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestRtmAdPortEntry

restRtmAdPortEntry 1.3.6.1.4.1.16.101.1.2.2.13.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestRtmAdPortEntry  

restRtmAdPortAddr 1.3.6.1.4.1.16.101.1.2.2.13.2.1.1
RTM ADx port physical address in nest:slot:port:element format
Status: mandatory Access: read-only
OBJECT-TYPE    
  RtmAdPortAddr  

restRtmAdPortDiagnostics 1.3.6.1.4.1.16.101.1.2.2.13.2.1.2
Remove will disconnect the element and set its start mode to off. Insert on a removed element will get the new MIB and set its start mode to auto. Reset will disconnect and then reconnect the specified element without changing its start mode in the configuration MIB. Set and Clear loopback types are set by using restRtmAdPortLoopbackType control values.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER insert(4), remove(5), reset(6), setLoopback(9), clearLoopback(8)  

restRtmAdPortInterface 1.3.6.1.4.1.16.101.1.2.2.13.2.1.3
Interface clocking type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dce1(1), dce3(3)  

restRtmAdPortStopBits 1.3.6.1.4.1.16.101.1.2.2.13.2.1.4
Number of stop bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oneStopBit(1), twoStopBit(2)  

restRtmAdPortGeneration 1.3.6.1.4.1.16.101.1.2.2.13.2.1.5
Type of port generation. It is used in cases when end points of the connections are rather distant and passing the control (EIA) functions takes much time. That is, if autogen is set, the functions are being generated by the local equipment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transparent(1), autogen(2)  

restRtmAdPortContention 1.3.6.1.4.1.16.101.1.2.2.13.2.1.6
Type of port contention. If f1nf1 is set, then when F1 is ON for at least 1 sec., the connection is requested. Otherwise, if F1 is OFF for at least 1 sec., the disconnect is requested. If f2nf2 is set, the same rule applied for F2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nobwc(1), f1nf1(2), f2nf2(3)  

restRtmAdPortOosOper 1.3.6.1.4.1.16.101.1.2.2.13.2.1.7
Out of Sync port operations types.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER doNothing(1), forceFn(2), mark(3), markFf(4), space(5), spaceFf(6)  

restRtmAdPortState 1.3.6.1.4.1.16.101.1.2.2.13.2.1.8
Port state. If undefined, then it is neither configured, nor connected. If defined, then it is configured, but not connected. If online, then it is both, configured and connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER undefined(1), defined(2), online(3)  

restRtmAdPortForcedFunc 1.3.6.1.4.1.16.101.1.2.2.13.2.1.9
This is a bit pattern of two bytes. The upper byte is reserved for future use. In the lower byte, the four least significant bits represent whether the function mapped to that bit should be forced (bit value 1) or not (0). For each function that is set to be forced, the four most significant bits represent whether the corresponding function should be forced high (1) or low (0). The functions represented by the bits in the lower byte are as follows: bits 1 (lsb), 5 - DSR bits 2, 6 - DCD bits 3, 7 - reserved bits 4, 8 - CTS
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

restRtmAdPortLoopbackType 1.3.6.1.4.1.16.101.1.2.2.13.2.1.10
The commands are: adRim - ADx remote loopback command toward user equipment adLim - ADx local loopback command toward RTM/ST-50 adLimDisc - ADx local loopback while disconnecting user rtmRim - RTM remote loopback command toward user equipment rtmLim - RTM local loopback command toward RTM/ST-50 rtmBidirectional - RTM local loopback while disconnecting user.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER adRim(1), adLim(2), adLimDisc(4), rtmRim(8), rtmLim(16), rtmBidirectional(32)  

restRtmAdPortLoopbackStatus 1.3.6.1.4.1.16.101.1.2.2.13.2.1.11
Status of the loopback. adLocalLl - ADx local loopback set by LL function of the interface (circuit 141) adLocalRl - ADx local loopback set by RL function of the interface (circuit 140).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER adRim(1), adLim(2), adLimDisc(4), rtmRim(8), rtmLim(16), rtmBidirectional(32), adLocalLl(64), adLocalRl(128), none(255)  

restRtmAdPortElecInterface 1.3.6.1.4.1.16.101.1.2.2.13.2.1.12
If restRtmAdPortHardwareType returns programmable(1), then this item is able to be of read-write type of access. Otherwise it is read-only. For this release this attribute access is read-only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER v24(1), v35(2), x21(3), noInterface(10)  

restRtmAdPortElIntStatus 1.3.6.1.4.1.16.101.1.2.2.13.2.1.13
If ADx unit has SIPEX chip installed, then hardware type would be programmable, otherwise it would be set to nonProgrammable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nonProgrammable(1), programmable(2)  

restRtmAdPortParSubstitution 1.3.6.1.4.1.16.101.1.2.2.13.2.1.14
This parameter is used with Async ports. When there is a parity error detected by ADx, instead of sending that character over the line it either being dropped (disable) or substituted with another predefined character (enable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

restRtmAdPortParSubstChar 1.3.6.1.4.1.16.101.1.2.2.13.2.1.15
This is the parity substitution character for restRtmAdPortParSubstitution MIB item.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

restRtmAdPortPhasorStatus 1.3.6.1.4.1.16.101.1.2.2.13.2.1.16
The bit mask is: bit 0 (LSB) receive underflow bit 1 receive overflow bit 2 receive empty bit 3 receive full bit 4-7 reserved bit 8 transmit underflow bit 9 transmit overflow bit 10 transmit empty bit 11 transmit full bit 12-15 (MSB) reserved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restRtmAdPortAdPhasorStatus 1.3.6.1.4.1.16.101.1.2.2.13.2.1.17
The bit mask is: bit 0 (LSB) receive underflow bit 1 receive overflow bit 2 receive empty bit 3 receive full bit 4-7 reserved bit 8 transmit underflow bit 9 transmit overflow bit 10 transmit empty bit 11 transmit full bit 12-15 (MSB) reserved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restRtmAdPortAdFunctions 1.3.6.1.4.1.16.101.1.2.2.13.2.1.18
The bit mask is: bit 0 (LSB) F1 (DTR) bit 1 F2 (RTS) bit 2-3 reserved bit 4 LL bit 5 RL bit 6 TM bit 7-15 (MSB) reserved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restRtmAdPortParity 1.3.6.1.4.1.16.101.1.2.2.13.2.1.19
This attribute values are applicable only for ASYNC mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER parNone(1), parEven(2), parOdd(3)  

restLgmPort 1.3.6.1.4.1.16.101.1.2.2.14
OBJECT IDENTIFIER    

restLgmPortTable 1.3.6.1.4.1.16.101.1.2.2.14.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestLgmPortEntry

restLgmPortEntry 1.3.6.1.4.1.16.101.1.2.2.14.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestLgmPortEntry  

restLgmPortAddr 1.3.6.1.4.1.16.101.1.2.2.14.1.1.1
LGM port virtual address in type:group:port format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restLgmPortLocalBERQuality 1.3.6.1.4.1.16.101.1.2.2.14.1.1.2
Local Bit Error Quality value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(1), pend(2), poor(3), fair(4), good(5), veryGood(6)  

restLgmPortBERWindowFill 1.3.6.1.4.1.16.101.1.2.2.14.1.1.3
Format e.g. 10/32, 5/32.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

restLgmPortRemoteNodeID 1.3.6.1.4.1.16.101.1.2.2.14.1.1.4
Node number that the LGM terminates on. If no remote connection has been established, then this attribute will return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2000  

restLgmPortRemotePortAddr 1.3.6.1.4.1.16.101.1.2.2.14.1.1.5
Port or bundle address that the LGM terminates on. If no remote connection has been established, then this attribute will return zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restLgmPortRemoteBERQuality 1.3.6.1.4.1.16.101.1.2.2.14.1.1.6
Remote Bit Error Quality value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notAvailable(1), pend(2), poor(3), fair(4), good(5), veryGood(6)  

restLgmPortRemoteRevision 1.3.6.1.4.1.16.101.1.2.2.14.1.1.7
Revision level on remote node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restLgmPortAvailableBw 1.3.6.1.4.1.16.101.1.2.2.14.1.1.8
Available bandwith in bps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restLgmPortUsedBw 1.3.6.1.4.1.16.101.1.2.2.14.1.1.9
Bandwith used in bps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restLgmPortNumCh 1.3.6.1.4.1.16.101.1.2.2.14.1.1.10
Number of TDM channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restLgmPortLgmPort 1.3.6.1.4.1.16.101.1.2.2.14.1.1.11
Physical address of the LGM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restLgmPortLinkSpeed 1.3.6.1.4.1.16.101.1.2.2.14.1.1.12
Link aggregate port speed in bps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restLgmPortDiagnostics 1.3.6.1.4.1.16.101.1.2.2.14.1.1.13
INTRODUCED 2.0.0 Enable on a disabled VILC will allow new channel connections to be made over this VILC. Disable will prevent any new channel connections from being made over this VILC. This will not affect existing channel connections. ClearVILCBerWindowFill will remove the existing windows for BER calculations and restart it.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2), clearVILCBerWindowFill(64)  

restLgmPortSyncState 1.3.6.1.4.1.16.101.1.2.2.14.1.1.14
INTRODUCED 2.0.0 Status of this LGM port synchronization state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inSync(1), los(2), ros(3), losAndRos(4)  

restLgmContentsTable 1.3.6.1.4.1.16.101.1.2.2.14.2
This table lists all of the channels on a specified LGM port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestLgmContentsEntry

restLgmContentsEntry 1.3.6.1.4.1.16.101.1.2.2.14.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestLgmContentsEntry  

restLgmContentsAddr 1.3.6.1.4.1.16.101.1.2.2.14.2.1.1
LGM Virtual Link address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restLgmContentsSequenceID 1.3.6.1.4.1.16.101.1.2.2.14.2.1.2
Index to multiple channels assigned to this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

restLgmContentsSourceNodeID 1.3.6.1.4.1.16.101.1.2.2.14.2.1.3
Source node ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restLgmContentsSourceAddr 1.3.6.1.4.1.16.101.1.2.2.14.2.1.4
Source address in nest:slot:port:element format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restLgmContentsDestNodeID 1.3.6.1.4.1.16.101.1.2.2.14.2.1.5
Destination node ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restLgmContentsDestAddr 1.3.6.1.4.1.16.101.1.2.2.14.2.1.6
Destination address in nest:slot:port:element format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restSaf 1.3.6.1.4.1.16.101.1.2.2.15
OBJECT IDENTIFIER    

restSafTable 1.3.6.1.4.1.16.101.1.2.2.15.1
This section of the MIB does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestSafEntry

restSafEntry 1.3.6.1.4.1.16.101.1.2.2.15.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestSafEntry  

restSafAddr 1.3.6.1.4.1.16.101.1.2.2.15.1.1.1
SAF address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restSafStatus 1.3.6.1.4.1.16.101.1.2.2.15.1.1.2
Indicates whether the SAF is synchronized or not, or whether the SAF is currently in the middle of a frame switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inSync(1), outOfSync(2), frameSwitch(3)  

restSafSubStatus 1.3.6.1.4.1.16.101.1.2.2.15.1.1.3
If the SAF status is out of sync, then this attribute indicates if it is due to an error or not. If the SAF is in sync or in the middle of a frame switch, then this attribute shall return no error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER syncError(1), noError(255)  

restSafRemoteNode 1.3.6.1.4.1.16.101.1.2.2.15.1.1.4
The node in which the remote side of this SAF connection resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restSafRemoteAddr 1.3.6.1.4.1.16.101.1.2.2.15.1.1.5
The address of the remote side of this SAF connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restSafInlNumber 1.3.6.1.4.1.16.101.1.2.2.15.1.1.6
The local INL number that this SAF is located on. For a local SAF, this attribute shall return 32.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

restSafBandwidthAvail 1.3.6.1.4.1.16.101.1.2.2.15.1.1.7
The available (unused) bandwidth in this SAF according to the NCP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..64000  

restSafNumChannels 1.3.6.1.4.1.16.101.1.2.2.15.1.1.8
The number of subrate channels currently connected through this SAF according to the NCP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..47  

restSafHWPhasorStatus 1.3.6.1.4.1.16.101.1.2.2.15.1.1.9
DEPRECATED 2.0.1 This attribute will always return x8080, which means not applicable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restSafSWPhasorStatus 1.3.6.1.4.1.16.101.1.2.2.15.1.1.10
DEPRECATED 2.0.1 This attribute will always return x8080, which means not applicable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restSafModNumChannels 1.3.6.1.4.1.16.101.1.2.2.15.1.1.11
INTRODUCED 2.0.1 The number of subrate channels currently connected through this SAF according to the module that this endpoint of the SAF resides on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..47  

restSafModBandwidthAvail 1.3.6.1.4.1.16.101.1.2.2.15.1.1.12
INTRODUCED 2.0.1 The available (unused) bandwidth in this SAF according to the module that this endpoint of the SAF resides on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..64000  

restSafDiagnostics 1.3.6.1.4.1.16.101.1.2.2.15.1.1.13
INTRODUCED 2.0.1 clearStats will clear the counters in this MIB section. setLoopback will initiate a loopback on this SAF. This will loopback all of the channels within the SAF. Currently, the only type of loopback that is supported is a bidirectional bus loopback. clearLoopback will clear the loopback on this SAF if one exists.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3), setLoopback(9), clearLoopback(8)  

restSafFrameSwitchLocation 1.3.6.1.4.1.16.101.1.2.2.15.1.1.14
INTRODUCED 2.0.1 If a frame switch is currently occurring on this SAF, then this attribute indicates the location of that frame switch. The value is a sum with an initial value of zero. For each possible frame switch location L in the range 1 to 2, the value 2 raised to (L - 1) is added to the sum if there is a frame switch in that location. The possible frame switch locations are the following: L location 1 add bus 2 drop bus Thus, if there is a frame switch on the add bus, the value returned would be 1. If there is a frame switch on the drop bus, the value returned would be 2. If there is a frame switch on both the add and the drop busses, then the value returned would be 3. If there is no frame switch occurring, then the value returned will be zero (0), indicating no frame switch locations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

restSafFrameSwitchIndicator 1.3.6.1.4.1.16.101.1.2.2.15.1.1.15
INTRODUCED 2.0.1 Indicates if a frame switch is needed on this SAF or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

restSafRemoteStatus 1.3.6.1.4.1.16.101.1.2.2.15.1.1.16
INTRODUCED 2.0.1 The view of the remote endpoint of SAF from the module that this endpoint of the SAF resides on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER in-service(1), out-of-service(2)  

restSafSyncErrors 1.3.6.1.4.1.16.101.1.2.2.15.1.1.17
INTRODUCED 2.0.1 The number of sync errors on this SAF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restSafOosErrors 1.3.6.1.4.1.16.101.1.2.2.15.1.1.18
INTRODUCED 2.0.1 The number of OOS errors on this SAF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restSafPhasorStatus 1.3.6.1.4.1.16.101.1.2.2.15.1.1.19
INTRODUCED 2.0.1 The status of the phasor for this SAF. The first octet is used to indicate transmit phasor status. The bits are interpretted as follows (bit 1 is the least significant bit of the octet): bit 1: phasor underflow bit 2: phasor overflow bits 3-6: unused bit 7: software phasor (if clear, hardware phasor) bit 8: phasor not applicable The second octet is used to indicate receive phasor status. The bits are interpretted as follows (bit 1 is the least significant bit of the octet): bit 1: phasor underflow bit 2: phasor overflow bits 3-6: unused bit 7: software phasor (if clear, hardware phasor) bit 8: phasor not applicable For both phasors (receive and transmit), if the phasor is OK, then the octet will be set to 0 for a hardware phasor, or x40 for a software phasor. If there is no phasor of that type (receive or transmit), then the octet will be set to x80. If the SAF does not support any phasors, then the value returned for this attribute will be x8080.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

restSafContentsTable 1.3.6.1.4.1.16.101.1.2.2.15.2
This section of the MIB lists all of the channels defined on an SAF. It does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestSafContentsEntry

restSafContentsEntry 1.3.6.1.4.1.16.101.1.2.2.15.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestSafContentsEntry  

restSafContentsAddr 1.3.6.1.4.1.16.101.1.2.2.15.2.1.1
SAF address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restSafContentsSeqNum 1.3.6.1.4.1.16.101.1.2.2.15.2.1.2
SAF channel number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

restSafContentsSrcNode 1.3.6.1.4.1.16.101.1.2.2.15.2.1.3
Source node of the channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restSafContentsSrcAddr 1.3.6.1.4.1.16.101.1.2.2.15.2.1.4
Source channel address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restSafContentsDestNode 1.3.6.1.4.1.16.101.1.2.2.15.2.1.5
Destination node of the channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restSafContentsDestAddr 1.3.6.1.4.1.16.101.1.2.2.15.2.1.6
Destination channel address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restDsmPort 1.3.6.1.4.1.16.101.1.2.2.16
OBJECT IDENTIFIER    

restDsmDChPortTable 1.3.6.1.4.1.16.101.1.2.2.16.1
This section of the MIB contains the D-channel port status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestDsmDChPortEntry

restDsmDChPortEntry 1.3.6.1.4.1.16.101.1.2.2.16.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestDsmDChPortEntry  

restDsmDChPortAddr 1.3.6.1.4.1.16.101.1.2.2.16.1.1.1
Address of D-channel port. Format is type.group.port. The server type is 131.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restDsmDChPortDiagnostics 1.3.6.1.4.1.16.101.1.2.2.16.1.1.2
When set to layer2Reset all B-channels associated with this D-channel will be disconnected (the D-channel itself will stay connected).
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER layer2Reset(1)  

restDsmDChPortNumCallsInProc 1.3.6.1.4.1.16.101.1.2.2.16.1.1.3
Current number of calls in process of being completed (until CONNECT messages exchange took place).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmDChPortNumCallsConn 1.3.6.1.4.1.16.101.1.2.2.16.1.1.4
Current number of calls connected via this D-channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restDsmDChCallRealTable 1.3.6.1.4.1.16.101.1.2.2.16.2
This section of the MIB contains information about a real call from the point of view of the DSM that its D-channel is allocated on.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestDsmDChCallRealEntry

restDsmDChCallRealEntry 1.3.6.1.4.1.16.101.1.2.2.16.2.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestDsmDChCallRealEntry  

restDsmDChCallRealAddr 1.3.6.1.4.1.16.101.1.2.2.16.2.1.1
Address of the D-channel port associated with this real call. Format is type(131).group.port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restDsmDChCallRealBundle 1.3.6.1.4.1.16.101.1.2.2.16.2.1.2
Bundle number of the B-channel used for this real call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..31  

restDsmDChCallRealCDRContents 1.3.6.1.4.1.16.101.1.2.2.16.2.1.3
Call Detail Record for a real call in progress on a D-channel. Real calls are those that involve B-channels. The bytes in a CDR for a call in progress are interpretted as follows (note that this is the same as the interpretation for CDRs associated with active virtual calls): Part 1: generic information 1: CDR type, values are: level 1 (1) level 2 (2) active (3) - this applies for both Part 2 and Part 3 not applicable (0) - this means that there is no active CDR for this real call ID, 2: unused 3-4: partition ID 5-6: call ID 7-8: unused Part 2: Level 1 (Physical Characteristics): 9-12: originating time 13-16: answer time 17-20: disconnect time 21-22: B-channel source node ID 23: B-channel source nest ID 24: B-channel source slot ID 25-26: B-channel source port ID 27-28: B-channel source channel ID 29-30: B-channel destination node ID 31: B-channel destination nest ID 32: B-channel destination slot ID 33-34: B-channel destination port ID 35-36: B-channel destination channel ID 37: call type, values are: real (3) virtual (0) 38: special profile type, values defined in attribute recfDsmDChQOSCallType 39: info type, values are: Q.Sig speech (0) DPNSS A-law (1) DPNSS ADPCM (2) DPNSS Mu-law (3) Unrestricted data (8) Restricted data (9) 3.1 KHz audio (16) 7 KHz audio (17) video (24) 40: special profile index 41: channel profile index 42: unused (needed for NCP clear cause, which is never valid for calls in progress) 43: unused (needed for clear cause, which is never valid for calls in progress) 44: number of call attempts between DSMs 45-48: transmission rate Part 3: Level 2 (Data Link Layer): 49-52: setup final time 53-56: connect request time 57-60: connect response time 61-62: source node ID 63: source nest ID 64: source slot ID 65-66: destination node ID 67: destination nest ID 68: destination slot ID 69: calling number size (number of bytes, not string length) - this number is referred to from now on as x 70-(69+x): calling number (70+x): called number size (number of bytes, not string length) - this number is referred to from now on as y (71+x)-(70+x+y): called number (71+x+y): routing digits (72+x+y): unused.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..112)  

restDsmDChCallRealDiagnostics 1.3.6.1.4.1.16.101.1.2.2.16.2.1.4
INTRODUCED 2.0.1 resetLayer2 will reset the Layer 2 protocol on the specified B-channel. It is not supported for Q.Sig.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER resetLayer2(1)  

restDsmDChCallRealLayer2Status 1.3.6.1.4.1.16.101.1.2.2.16.2.1.5
INTRODUCED 2.0.1 Indicates the Layer 2 status of a real call the point of view of the DSM. Not applicable will be returned for the D-channel bundle if the DPNSS protocol is used and for the bundles not used for the D-channel if the Q.Sig protocol is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pending(1), in-service(2), layer2Timeout(3), layer2Mismatch(4), notApplicable(255)  

restDsmDChCallRealLayer2State 1.3.6.1.4.1.16.101.1.2.2.16.2.1.6
INTRODUCED 2.0.1 Indicates the Layer 2 protocol state of a real call from the point of view of the DSM. The values between 1 and 127 are used for DPNSS states. The values between 128 and 254 are used for Q.Sig states. Not applicable will be returned for the D-channel bundle if the DPNSS protocol is used and for the bundles not used for the D-channel if the Q.Sig protocol is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), ready(2), waitingForResponse(3), waitingForEstablishment(4), outOfService(5), unassignedTEI(129), assignAwaitingTEI(130), establishAwaitingTEI(131), assignedTEI(132), awaitingEstablishment(133), awaitingRelease(134), multipleFrameEstablished(135), timeRecovery(136), notApplicable(255)  

restDsmDChCallRealLayer3State 1.3.6.1.4.1.16.101.1.2.2.16.2.1.7
INTRODUCED 2.0.1 Indicates the Layer 3 protocol state on a real call from the point of view of the DSM. The values between 1 and 127 are used for DPNSS states. The values between 128 and 254 are used for Q.Sig states. Not applicable will be returned for the D-channel bundle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), idle(2), outgoingService(3), incomingService(4), awaitNAMOut(5), awaitNAMIn(6), awaitCCMOut(7), awaitCCMIn(8), setupComplete(9), callRejecting(10), callClearing(11), callBarred(12), preIdle(13), awaitRelease(14), nullState(129), callInit(130), overlapSending(131), outgoingCallProceeding(132), callDelivered(133), callPresent(135), callReceived(136), connectRequest(137), incomingCallProceeding(138), callActive(139), disconnectRequest(140), disconnectIndication(141), suspendRequest(144), resumeRequest(146), releaseRequest(148), overlapReceive(154), idleState(155), establishWait(156), passiveAwaitingConf(157), callPassive(158), registerRequest(159), cancelRequest(160), asaiTr1State(161), u10HoldRequest(162), u10TransferRequest(163), u10ConferenceRequest(164), u10ReconnectRequest(165), u10AwaitingDisc(166), u10CallOnHold(167), deactivated(168), reactivateRequested(169), deactivateRequested(170), nilHoldReqU3(171), nilHoldReqU4(172), nilHoldReqU10(173), nilRetrieveU3(174), nilRetrieveU4(175), nilRetrieveU10(176), nilHoldActiveU3(177), nilHoldActiveU4(178), nilHoldActiveU10(179), broadcastState(180), notApplicable(255)  

restDsmDChCallRealTransitState 1.3.6.1.4.1.16.101.1.2.2.16.2.1.8
INTRODUCED 2.0.1 Indicates the transit call control state of a real call from the point of view of the DSM. Not applicable will be returned for the D-channel bundle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), idle(2), awaitDigits(3), awaitAdditionalDigits(4), overlap(5), incomingCallProceeding(6), transitCallProceeding(7), callAlerting(8), active(9), awaitIncomingRelease(10), awaitOutgoingRelease(11), awaitTwoWayRelease(12), awaitCallRealChannelResponse(13), awaitNcpReleaseResponse(14), awaitNcpReleaseNoResponse(15), awaitNcpRelease(16), awaitNcpDisconnect(17), awaitNcp(18), notApplicable(255)  

restDsmDChCallVirtTable 1.3.6.1.4.1.16.101.1.2.2.16.3
This section of the MIB contains information about a virtual call from the point of view of the DSM that its D-channel is allocated on.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestDsmDChCallVirtEntry

restDsmDChCallVirtEntry 1.3.6.1.4.1.16.101.1.2.2.16.3.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestDsmDChCallVirtEntry  

restDsmDChCallVirtAddr 1.3.6.1.4.1.16.101.1.2.2.16.3.1.1
Address of the D-channel port associated with this virtual call. Format is type(131).group.port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restDsmDChCallVirtNumber 1.3.6.1.4.1.16.101.1.2.2.16.3.1.2
Identity of the virtual call to be accessed. For the DPNSS protocol, this index is a bundle number in the range of 1 to 31. For the Q.Sig protocol, this index is an artificial entity and does not reflect any information about the call origination time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..480  

restDsmDChCallVirtCDRContents 1.3.6.1.4.1.16.101.1.2.2.16.3.1.3
Call Detail Record for a virtual call in progress on a D-channel. Virtual calls are those that do not involve B-channels. The bytes in a CDR for a call in progress are interpretted as follows (note that this is the same as the interpretation for CDRs associated with active real calls on a B-channel): Part 1: generic information 1: CDR type, values are: level 1 (1) level 2 (2) active (3) - this applies for both Part 2 and Part 3 not applicable (0) - this means that there is no active CDR for this virtual call ID 2: unused 3-4: partition ID 5-6: call ID 7-8: unused Part 2: Level 1 (Physical Characteristics): 9-12: originating time 13-16: answer time 17-20: disconnect time 21-22: B-channel source node ID 23: B-channel source nest ID 24: B-channel source slot ID 25-26: B-channel source port ID 27-28: B-channel source channel ID 29-30: B-channel destination node ID 31: B-channel destination nest ID 32: B-channel destination slot ID 33-34: B-channel destination port ID 35-36: B-channel destination channel ID 37: call type, values are: real (3) virtual (0) 38: special profile type, values defined in attribute recfDsmDChQOSCallType 39: info type, values are: Q.Sig speech (0) DPNSS A-law (1) DPNSS ADPCM (2) DPNSS Mu-law (3) Unrestricted data (8) Restricted data (9) 3.1 KHz audio (16) 7 KHz audio (17) video (24) 40: special profile index 41: channel profile index 42: unused (needed for NCP clear cause, which is never valid for calls in progress) 43: unused (needed for clear cause, which is never valid for calls in progress) 44: number of call attempts between DSMs 45-48: transmission rate Part 3: Level 2 (Data Link Layer): 49-52: setup final time 53-56: connect request time 57-60: connect response time 61-62: source node ID 63: source nest ID 64: source slot ID 65-66: destination node ID 67: destination nest ID 68: destination slot ID 69: calling number size (number of bytes, not string length) - this number is referred to from now on as x 70-(69+x): calling number (70+x): called number size (number of bytes, not string length) - this number is referred to from now on as y (71+x)-(70+x+y): called number (71+x+y): routing digits (72+x+y): unused.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..112)  

restDsmDChCallVirtDiagnostics 1.3.6.1.4.1.16.101.1.2.2.16.3.1.4
INTRODUCED 2.0.1 resetLayer2 will reset the Layer 2 protocol for the specified virtual call. It is not supported for Q.Sig.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER resetLayer2(1)  

restDsmDChCallVirtLayer2Status 1.3.6.1.4.1.16.101.1.2.2.16.3.1.5
INTRODUCED 2.0.1 Indicates the Layer 2 status of a virtual call from the point of view of the DSM. Not applicable will be returned for the D-channel bundle if the DPNSS protocol is used and for all virtual calls if the Q.Sig protocol is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pending(1), in-service(2), layer2Timeout(3), layer2Mismatch(4), notApplicable(255)  

restDsmDChCallVirtLayer2State 1.3.6.1.4.1.16.101.1.2.2.16.3.1.6
INTRODUCED 2.0.1 Indicates the Layer 2 protocol state of a virtual call from the point of view of the DSM. The values between 1 and 127 are used for DPNSS states. The values between 128 and 254 are used for Q.Sig states. Not applicable will be returned for the D-channel bundle if the DPNSS protocol is used and for all virtual calls if the Q.Sig protocol is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), ready(2), waitingForResponse(3), waitingForEstablishment(4), outOfService(5), unassignedTEI(129), assignAwaitingTEI(130), establishAwaitingTEI(131), assignedTEI(132), awaitingEstablishment(133), awaitingRelease(134), multipleFrameEstablished(135), timeRecovery(136), notApplicable(255)  

restDsmDChCallVirtLayer3State 1.3.6.1.4.1.16.101.1.2.2.16.3.1.7
INTRODUCED 2.0.1 Indicates the Layer 3 protocol state of a virtual call from the point of view of the DSM. The values between 1 and 127 are used for DPNSS states. The values between 128 and 254 are used for Q.Sig states. Not applicable will be returned for the D-channel bundle if the DPNSS protocol is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), idle(2), outgoingService(3), incomingService(4), awaitNAMOut(5), awaitNAMIn(6), awaitCCMOut(7), awaitCCMIn(8), setupComplete(9), callRejecting(10), callClearing(11), callBarred(12), preIdle(13), awaitRelease(14), nullState(129), callInit(130), overlapSending(131), outgoingCallProceeding(132), callDelivered(133), callPresent(135), callReceived(136), connectRequest(137), incomingCallProceeding(138), callActive(139), disconnectRequest(140), disconnectIndication(141), suspendRequest(144), resumeRequest(146), releaseRequest(148), overlapReceive(154), idleState(155), establishWait(156), passiveAwaitingConf(157), callPassive(158), registerRequest(159), cancelRequest(160), asaiTr1State(161), u10HoldRequest(162), u10TransferRequest(163), u10ConferenceRequest(164), u10ReconnectRequest(165), u10AwaitingDisc(166), u10CallOnHold(167), deactivated(168), reactivateRequested(169), deactivateRequested(170), nilHoldReqU3(171), nilHoldReqU4(172), nilHoldReqU10(173), nilRetrieveU3(174), nilRetrieveU4(175), nilRetrieveU10(176), nilHoldActiveU3(177), nilHoldActiveU4(178), nilHoldActiveU10(179), broadcastState(180), notApplicable(255)  

restDsmDChCallVirtTransitState 1.3.6.1.4.1.16.101.1.2.2.16.3.1.8
INTRODUCED 2.0.1 Indicates the transit call control state of a virtual call from the point of view of the DSM. Not applicable will be returned for the D-channel bundle if the DPNSS protocol is used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), idle(2), awaitDigits(3), awaitAdditionalDigits(4), overlap(5), incomingCallProceeding(6), transitCallProceeding(7), callAlerting(8), active(9), awaitIncomingRelease(10), awaitOutgoingRelease(11), awaitTwoWayRelease(12), awaitCallVirtChannelResponse(13), awaitNcpReleaseResponse(14), awaitNcpReleaseNoResponse(15), awaitNcpRelease(16), awaitNcpDisconnect(17), awaitNcp(18), notApplicable(255)  

restHwRsc 1.3.6.1.4.1.16.101.1.2.2.17
OBJECT IDENTIFIER    

restHwRscEngineTable 1.3.6.1.4.1.16.101.1.2.2.17.1
This section of the MIB returns status of an on-board engine.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestHwRscEngineEntry

restHwRscEngineEntry 1.3.6.1.4.1.16.101.1.2.2.17.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestHwRscEngineEntry  

restHwRscEngineModAddr 1.3.6.1.4.1.16.101.1.2.2.17.1.1.1
Physical address of the module this engine is located on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restHwRscEngineID 1.3.6.1.4.1.16.101.1.2.2.17.1.1.2
The engine ID on the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

restHwRscEngineDiagnostics 1.3.6.1.4.1.16.101.1.2.2.17.1.1.3
Insert will allow a removed engine to come online again using the current settings in the engine configuration MIB (recfHwRscEngineTable). The start mode of the engine (recfHwRscEngineStartMode) will be set to automatic. This command will fail if the engine is not removed. Remove will take an active engine offline and force a disconnect of any channels on the engine. The start mode of the engine will be set to offline. This command will fail if the engine is already offline. Reset will remove and then insert the engine. It will not change the engine start mode, but will load the current settings in the engine configuration MIB. If the engine is currently offline, then the remove action will not be taken. In this case, the reset is equivalent to an insert. If the engine start mode is set to offline, then the insert action will not be taken. In this case, the reset is equivalent to a remove. This command will force a disconnect of any channels on the engine.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER insert(4), remove(5), reset(6)  

restHwRscEngineStatus 1.3.6.1.4.1.16.101.1.2.2.17.1.1.4
This engine status: - logically removed, - up and running - engine failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER removed(5), normal(6), failed(43)  

restHwRscEngineApplication 1.3.6.1.4.1.16.101.1.2.2.17.1.1.5
Indicates the type of application allocated on this engine, if any.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x50(1), celp-atc(2), adpcm(3), link(4), none(255)  

restHwRscEngineMaxPorts 1.3.6.1.4.1.16.101.1.2.2.17.1.1.6
Maximum number of application ports on this engine. If none returns zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restHwRscEngineNumPorts 1.3.6.1.4.1.16.101.1.2.2.17.1.1.7
Number of application ports on this engine. If none returns zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restHwRscEngineMaxSAFs 1.3.6.1.4.1.16.101.1.2.2.17.1.1.8
Maximum number of SAF ports on this engine. If none returns zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restHwRscEngineNumSAFs 1.3.6.1.4.1.16.101.1.2.2.17.1.1.9
Number of SAF ports on this engine. If none returns zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restHwRscEngineMaxSCFs 1.3.6.1.4.1.16.101.1.2.2.17.1.1.10
Maximum number of SCF ports on this engine. If none returns zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restHwRscEngineNumSCFs 1.3.6.1.4.1.16.101.1.2.2.17.1.1.11
Number of SCF ports on this engine. If none returns zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restHwRscEngineMaxLoad 1.3.6.1.4.1.16.101.1.2.2.17.1.1.12
Indicates the total load capacity of this engine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restHwRscEngineCurLoad 1.3.6.1.4.1.16.101.1.2.2.17.1.1.13
Indicates the percentage of the total load capacity of this engine that is currently in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restHwRscEngineSubStatus 1.3.6.1.4.1.16.101.1.2.2.17.1.1.14
INTRODUCED 2.0.1 If an engine is in a failed state, then this value will indicate the reason for the failure. If the engine is not failed, then none will be returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER startupDiagnosticsFailure(1), noWellAndAlive(2), none(255)  

restStatPort 1.3.6.1.4.1.16.101.1.2.3.1
OBJECT IDENTIFIER    

restStatPortT1mTable 1.3.6.1.4.1.16.101.1.2.3.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatPortT1mEntry

restStatPortT1mEntry 1.3.6.1.4.1.16.101.1.2.3.1.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatPortT1mEntry  

restStatPortT1mAddr 1.3.6.1.4.1.16.101.1.2.3.1.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restStatPortT1mIndex 1.3.6.1.4.1.16.101.1.2.3.1.1.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

restStatPortT1mStartTime 1.3.6.1.4.1.16.101.1.2.3.1.1.1.3
Indicates when this statistics interval was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortT1mErrSec 1.3.6.1.4.1.16.101.1.2.3.1.1.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortT1mSevErrSec 1.3.6.1.4.1.16.101.1.2.3.1.1.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortT1mBstyErrSec 1.3.6.1.4.1.16.101.1.2.3.1.1.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortT1mUnavailSec 1.3.6.1.4.1.16.101.1.2.3.1.1.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortT1mLostFrame 1.3.6.1.4.1.16.101.1.2.3.1.1.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortT1mControlMode 1.3.6.1.4.1.16.101.1.2.3.1.1.1.9
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3)  

restStatPortE1mTable 1.3.6.1.4.1.16.101.1.2.3.1.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatPortE1mEntry

restStatPortE1mEntry 1.3.6.1.4.1.16.101.1.2.3.1.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatPortE1mEntry  

restStatPortE1mAddr 1.3.6.1.4.1.16.101.1.2.3.1.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restStatPortE1mIndex 1.3.6.1.4.1.16.101.1.2.3.1.2.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

restStatPortE1mStartTime 1.3.6.1.4.1.16.101.1.2.3.1.2.1.3
Indicates when this statistics interval was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortE1mErrSec 1.3.6.1.4.1.16.101.1.2.3.1.2.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortE1mSevErrSec 1.3.6.1.4.1.16.101.1.2.3.1.2.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortE1mBstyErrSec 1.3.6.1.4.1.16.101.1.2.3.1.2.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortE1mUnavailSec 1.3.6.1.4.1.16.101.1.2.3.1.2.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortE1mLostFrame 1.3.6.1.4.1.16.101.1.2.3.1.2.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortE1mControlMode 1.3.6.1.4.1.16.101.1.2.3.1.2.1.9
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3)  

restStatPortPktTable 1.3.6.1.4.1.16.101.1.2.3.1.3
This section of the MIB does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatPortPktEntry

restStatPortPktEntry 1.3.6.1.4.1.16.101.1.2.3.1.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatPortPktEntry  

restStatPortPktAddr 1.3.6.1.4.1.16.101.1.2.3.1.3.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restStatPortPktControlMode 1.3.6.1.4.1.16.101.1.2.3.1.3.1.2
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3)  

restStatPortPktSegmentSent 1.3.6.1.4.1.16.101.1.2.3.1.3.1.3
Segments sent from the network to the user device on any of the DLCIs on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktSegmentRecv 1.3.6.1.4.1.16.101.1.2.3.1.3.1.4
Segments received at the network from the user device on any of the DLCIs on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktOctetSent 1.3.6.1.4.1.16.101.1.2.3.1.3.1.5
Octets sent from the network to the user device on any of the DLCIs on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktOctetRecv 1.3.6.1.4.1.16.101.1.2.3.1.3.1.6
Octets received at the network from the user device on any of the DLCIs on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktDlciDiscard 1.3.6.1.4.1.16.101.1.2.3.1.3.1.7
Number of frames discarded because the destination DLCI was not active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktBadAddrDiscard 1.3.6.1.4.1.16.101.1.2.3.1.3.1.8
Number of frames discarded because the address field was not two bytes in length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktOvrszeDiscard 1.3.6.1.4.1.16.101.1.2.3.1.3.1.9
Number of frames received from the user device that were discarded because they exceeded the maximum frame size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktUnderszeDiscard 1.3.6.1.4.1.16.101.1.2.3.1.3.1.10
Number of HDLC frames discarded because the frame was too short.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktCRCDiscard 1.3.6.1.4.1.16.101.1.2.3.1.3.1.11
Number of HDLC frames discarded because the CRC was bad.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktSwOvrRunDiscard 1.3.6.1.4.1.16.101.1.2.3.1.3.1.12
Number of frames discarded because of port software buffer over run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktUnderRunDiscard 1.3.6.1.4.1.16.101.1.2.3.1.3.1.13
Number of HDLC frames discarded because of under run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktAbortDiscard 1.3.6.1.4.1.16.101.1.2.3.1.3.1.14
Number of HDLC frames discarded because frame abort was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktHwOvrRunDiscard 1.3.6.1.4.1.16.101.1.2.3.1.3.1.15
Number of frames discarded because of port hardware over run.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktLmiSegmentSent 1.3.6.1.4.1.16.101.1.2.3.1.3.1.16
Number of LMI message segments sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktLmiSegmentRecv 1.3.6.1.4.1.16.101.1.2.3.1.3.1.17
Number of LMI message segments received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktLmiSyntaxErr 1.3.6.1.4.1.16.101.1.2.3.1.3.1.18
Number of LMI messages dropped due to syntax errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktLmiWrongSeq 1.3.6.1.4.1.16.101.1.2.3.1.3.1.19
Number of LMI messages dropped due to incorrect sequence numbers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktLmiPollTimeOut 1.3.6.1.4.1.16.101.1.2.3.1.3.1.20
Number of LMI messages dropped due to poll time outs. The parameter recfFrPortLmiPollingTimer controls the duration of this timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktLmiWaitTimeOut 1.3.6.1.4.1.16.101.1.2.3.1.3.1.21
Number of LMI messages dropped due to wait time outs. The parameter recfFrPortLmiWaitingTimer controls the duration of this timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortPktLmiTxSeqNum 1.3.6.1.4.1.16.101.1.2.3.1.3.1.22
LMI transmit sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortPktLmiRxSeqNum 1.3.6.1.4.1.16.101.1.2.3.1.3.1.23
LMI receive sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortPktLmiNumGoodEvents 1.3.6.1.4.1.16.101.1.2.3.1.3.1.24
Number of good LMI events within the current monitor window. The size of this window is controlled by the recfFrPortLmiMonitoredEvents attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortPktLmiNumBadEvents 1.3.6.1.4.1.16.101.1.2.3.1.3.1.25
Number of bad LMI events within the current monitor window. The size of this window is controlled by the recfFrPortLmiMonitoredEvents attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatPortPktLmiEventHistory 1.3.6.1.4.1.16.101.1.2.3.1.3.1.26
Shows the last eight LMI events. Each event requires four bits. Bits 1 (lsb), 2, 3 and 4 of the last octet represent the most recent event. The event values are as follows: 1 - received status enquiry 2 - received full status enquiry 3 - received status 4 - received full status 5 - transmitted status enquiry 6 - transmitted full status enquiry 7 - transmitted status 8 - transmitted full status 9 - poll timer expired 10 - wait timer expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

restStatPortAsmX50Table 1.3.6.1.4.1.16.101.1.2.3.1.4
This section of the MIB does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatPortAsmX50Entry

restStatPortAsmX50Entry 1.3.6.1.4.1.16.101.1.2.3.1.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatPortAsmX50Entry  

restStatPortAsmX50Addr 1.3.6.1.4.1.16.101.1.2.3.1.4.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restStatPortAsmX50Control 1.3.6.1.4.1.16.101.1.2.3.1.4.1.2
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(1)  

restStatPortAsmX50RxFrameErrors 1.3.6.1.4.1.16.101.1.2.3.1.4.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortAsmX50LocalOs 1.3.6.1.4.1.16.101.1.2.3.1.4.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortAsmX50RemoteOs 1.3.6.1.4.1.16.101.1.2.3.1.4.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortRtmTable 1.3.6.1.4.1.16.101.1.2.3.1.5
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatPortRtmEntry

restStatPortRtmEntry 1.3.6.1.4.1.16.101.1.2.3.1.5.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatPortRtmEntry  

restStatPortRtmAddr 1.3.6.1.4.1.16.101.1.2.3.1.5.1.1
RTM port physical address in nest:slot:port format
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restStatPortRtmControl 1.3.6.1.4.1.16.101.1.2.3.1.5.1.2
Clears the statistics of a port.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3)  

restStatPortRtmUIFarEndBlkErr 1.3.6.1.4.1.16.101.1.2.3.1.5.1.3
Count of RTM port U-interface far end block errors. It is a count that is being kept by RTM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortRtmUINearEndBlkErr 1.3.6.1.4.1.16.101.1.2.3.1.5.1.4
Count of RTM port U-interface near end block errors. It is a count that is being kept by RTM module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortRtmAdUIFarEndBlkErr 1.3.6.1.4.1.16.101.1.2.3.1.5.1.5
Count of RTM port U-interface far end block errors. It is a count that is being kept by RTM AD module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortRtmAdUINrEndBlkErr 1.3.6.1.4.1.16.101.1.2.3.1.5.1.6
Count of RTM port U-interface near end block errors. It is a count that is being kept by RTM AD module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortRtmOOSTransitions 1.3.6.1.4.1.16.101.1.2.3.1.5.1.7
Count of RTM port OOS transition occurances. It is a summary of this events for all the elements on the port .
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortAsmVoiceTable 1.3.6.1.4.1.16.101.1.2.3.1.6
This section of the MIB does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatPortAsmVoiceEntry

restStatPortAsmVoiceEntry 1.3.6.1.4.1.16.101.1.2.3.1.6.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatPortAsmVoiceEntry  

restStatPortAsmVoiceChanAddr 1.3.6.1.4.1.16.101.1.2.3.1.6.1.1
Address of T1M/E1M bundle which is being used by this port while connected. If disconnected returns error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restStatPortAsmVoiceControl 1.3.6.1.4.1.16.101.1.2.3.1.6.1.2
Clear stats will clear all statistics for specified port.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3)  

restStatPortAsmVoiceFrameOOSs 1.3.6.1.4.1.16.101.1.2.3.1.6.1.3
Frame OOS statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortAsmVoiceSignalOOSs 1.3.6.1.4.1.16.101.1.2.3.1.6.1.4
Signaling OOS statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortAsmVoiceHighBERs 1.3.6.1.4.1.16.101.1.2.3.1.6.1.5
HBER statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortLgmTable 1.3.6.1.4.1.16.101.1.2.3.1.7
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatPortLgmEntry

restStatPortLgmEntry 1.3.6.1.4.1.16.101.1.2.3.1.7.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatPortLgmEntry  

restStatPortLgmAddr 1.3.6.1.4.1.16.101.1.2.3.1.7.1.1
Address of the LGM port in type:group:port format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restStatPortLgmControlMode 1.3.6.1.4.1.16.101.1.2.3.1.7.1.2
Clears the statistics of a port.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(1)  

restStatPortLgmBadSync 1.3.6.1.4.1.16.101.1.2.3.1.7.1.3
Number of bad sync count received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortLgmOosCount 1.3.6.1.4.1.16.101.1.2.3.1.7.1.4
Number of out of sync conditions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortLgmFrameSent 1.3.6.1.4.1.16.101.1.2.3.1.7.1.5
Number of frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortLgmFrameRecd 1.3.6.1.4.1.16.101.1.2.3.1.7.1.6
Number of frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortLgmFrameReTx 1.3.6.1.4.1.16.101.1.2.3.1.7.1.7
Number of frames retransmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortLgmFrameNak 1.3.6.1.4.1.16.101.1.2.3.1.7.1.8
Number of NACKs sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortLgmSabmSent 1.3.6.1.4.1.16.101.1.2.3.1.7.1.9
Number of SABMs sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortLgmSabmRecd 1.3.6.1.4.1.16.101.1.2.3.1.7.1.10
Number of SABMs received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortLgmRnrSent 1.3.6.1.4.1.16.101.1.2.3.1.7.1.11
Number of Receiver_Not_Ready sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortLgmRnrRecd 1.3.6.1.4.1.16.101.1.2.3.1.7.1.12
Number of Receiver_Not_Ready received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

restStatPortDsm 1.3.6.1.4.1.16.101.1.2.3.1.8
OBJECT IDENTIFIER    

restStatPortDsmDChTable 1.3.6.1.4.1.16.101.1.2.3.1.8.1
This section contains the call statistics maintained for each D-channel port. There are also HDLC statistics maintained for D-channel ports. These are defined in restStatPortPktTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatPortDsmDChEntry

restStatPortDsmDChEntry 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatPortDsmDChEntry  

restStatPortDsmDChAddr 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.1
Address of the D-channel in type.group.port format. The server type is 131.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortAddr  

restStatPortDsmDChControlMode 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.2
Setting this field to clearStats will reset all of the counters in this MIB section to zero.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3)  

restStatPortDsmDChOrigAttempts 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.3
Number of calls attempted by the ISPBX over this D-channel. This includes both successful and failed calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChTermAttempts 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.4
Number of calls attempted by the ST network to the ISPBX connected to this D-channel. This includes both successful and failed calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChPbxLayer2Errs 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.5
Number of layer 2 errors detected by the DSM on this D-channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChPbxLayer3Errs 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.6
Number of layer 3 errors detected by the DSM on this D-channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChPbxLinkResets 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.7
Number of layer 2 reset commands received from the ISPBX on this D-channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChPbxDisconns 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.8
Number of calls disconnected on this D-channel due to a request from the local ISPBX.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChPbxUnkExchs 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.9
Number of call attempts originating from the local ISPBX that failed because the called number did not fall into any exchange codes to which the DSM has a route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChPbxNoBws 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.10
Number of call attempts originating from the local ISPBX that failed because no route could be found between the source and destination nodes with enough bandwidth for the channel connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChPbxNoCmprs 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.11
Number of call attempts originating from the local ISPBX that failed because a compression resource was not available in either the source or destination node of the channel connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChPbxNoBchs 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.12
Number of call attempts originating from the local ISPBX that failed because there were no available B-channels that could handle an outgoing call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChPbxOtherFails 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.13
Number of call attempts originating from the local ISPBX that failed for any reason not covered by the other statistics in this MIB section.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChNetDisconns 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.14
Number of calls disconnected on this D-channel due to a request from the ST network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatPortDsmDChNetOtherFails 1.3.6.1.4.1.16.101.1.2.3.1.8.1.1.15
Number of calls attempting to terminate on the local ISPBX that failed for any reason not covered by the other statistics in this MIB section.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatCh 1.3.6.1.4.1.16.101.1.2.3.2
OBJECT IDENTIFIER    

restStatChPktTable 1.3.6.1.4.1.16.101.1.2.3.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatChPktEntry

restStatChPktEntry 1.3.6.1.4.1.16.101.1.2.3.2.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatChPktEntry  

restStatChPktAddr 1.3.6.1.4.1.16.101.1.2.3.2.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restStatChPktSourceNodeID 1.3.6.1.4.1.16.101.1.2.3.2.1.1.2
Source node of the channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restStatChPktSourceChAddr 1.3.6.1.4.1.16.101.1.2.3.2.1.1.3
Source address of the channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restStatChPktDestNodeID 1.3.6.1.4.1.16.101.1.2.3.2.1.1.4
Destination node of the channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restStatChPktDestChAddr 1.3.6.1.4.1.16.101.1.2.3.2.1.1.5
Destination address of the channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restStatChPktControlMode 1.3.6.1.4.1.16.101.1.2.3.2.1.1.6
Clear stats will clear all of the statistics for the specified frame relay channel.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3)  

restStatChPktSegmentsToUser 1.3.6.1.4.1.16.101.1.2.3.2.1.1.7
Number of segments currently queued to be sent to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktSegmentsToNetwork 1.3.6.1.4.1.16.101.1.2.3.2.1.1.8
Number of segments currently queued to be sent into the network bound for the other end of the frame relay channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktYellowThreshold 1.3.6.1.4.1.16.101.1.2.3.2.1.1.9
Number of segments that can be in any queue before that channel is in yellow congestion mode. This value is 40% of the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktRedThreshold 1.3.6.1.4.1.16.101.1.2.3.2.1.1.10
Number of segments that can be in any queue before that channel is in red congestion mode. This value is 86% of the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktCritThreshold 1.3.6.1.4.1.16.101.1.2.3.2.1.1.11
Number of segments that can be in any queue before that channel is in critical congestion mode. This value is the maximum number of segments that the queue can contain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktPortCongMode 1.3.6.1.4.1.16.101.1.2.3.2.1.1.12
Congestion mode of the port queue, which forwards segments to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), yellow(2), red(3), critical(4)  

restStatChPktNetCongMode 1.3.6.1.4.1.16.101.1.2.3.2.1.1.13
Congestion mode of the network queue, which forwards segments to the network, destined for the other endpoint of the frame relay channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), yellow(2), red(3), critical(4)  

restStatChPktRemoteCongMode 1.3.6.1.4.1.16.101.1.2.3.2.1.1.14
Worst congestion mode of all of the segment queues between this node and the other endpoint of the frame relay channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), yellow(2), red(3), critical(4)  

restStatChPktCIRCredit 1.3.6.1.4.1.16.101.1.2.3.2.1.1.15
Number of CIR octets that can be sent per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktEIRCredit 1.3.6.1.4.1.16.101.1.2.3.2.1.1.16
Number of EIR octets that can be sent per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktFECNSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.17
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBECNSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.18
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortCIRSegSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.19
Number of CIR segments sent from the network to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortCIRSegRcv 1.3.6.1.4.1.16.101.1.2.3.2.1.1.20
Number of CIR segments received from the user device to be sent to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortEIRSegSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.21
Number of EIR segments sent from the network to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortEIRSegRcv 1.3.6.1.4.1.16.101.1.2.3.2.1.1.22
Number of EIR segments received from the user device to be sent to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortCIROctetSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.23
Number of CIR octets sent from the network to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortCIROctetRcv 1.3.6.1.4.1.16.101.1.2.3.2.1.1.24
Number of CIR octets received from the user device to be sent to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortEIROctetSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.25
Number of EIR octets sent from the network to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortEIROctetRcv 1.3.6.1.4.1.16.101.1.2.3.2.1.1.26
Number of EIR octets received from the user device to be sent to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortCIRSegDrops 1.3.6.1.4.1.16.101.1.2.3.2.1.1.27
Number of CIR segments received from the user device that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortEIRSegDrops 1.3.6.1.4.1.16.101.1.2.3.2.1.1.28
Number of EIR segments received from the user device that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortCIROctetDrops 1.3.6.1.4.1.16.101.1.2.3.2.1.1.29
Number of CIR octets received from the user device that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktPortEIROctetDrops 1.3.6.1.4.1.16.101.1.2.3.2.1.1.30
Number of EIR octets received from the user device that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetCIRSegSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.31
Number of CIR segments sent from the user device to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetCIRSegRcv 1.3.6.1.4.1.16.101.1.2.3.2.1.1.32
Number of CIR segments received from the network to be sent to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetEIRSegSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.33
Number of EIR segments sent from the user device to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetEIRSegRcv 1.3.6.1.4.1.16.101.1.2.3.2.1.1.34
Number of EIR segments received from the network to be sent to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetCIROctetSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.35
Number of CIR octets sent from the user device to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetCIROctetRcv 1.3.6.1.4.1.16.101.1.2.3.2.1.1.36
Number of CIR octets received from the network to be sent to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetEIROctetSent 1.3.6.1.4.1.16.101.1.2.3.2.1.1.37
Number of EIR octets sent from the user device to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetEIROctetRcv 1.3.6.1.4.1.16.101.1.2.3.2.1.1.38
Number of EIR octets received from the network to be sent to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetCIRSegDrops 1.3.6.1.4.1.16.101.1.2.3.2.1.1.39
Number of CIR segments received from the network that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetEIRSegDrops 1.3.6.1.4.1.16.101.1.2.3.2.1.1.40
Number of EIR segments received from the network that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetCIROctetDrops 1.3.6.1.4.1.16.101.1.2.3.2.1.1.41
Number of CIR octets received from the network that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktNetEIROctetDrops 1.3.6.1.4.1.16.101.1.2.3.2.1.1.42
Number of EIR octets received from the network that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktSegEIRDiscard 1.3.6.1.4.1.16.101.1.2.3.2.1.1.43
Number of segments discarded because the system was unable to send EIR traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktSegSeqDiscard 1.3.6.1.4.1.16.101.1.2.3.2.1.1.44
Number of segments discarded because a sequence error was detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktSegCongPortDiscard 1.3.6.1.4.1.16.101.1.2.3.2.1.1.45
Number of segments discarded because of congestion on the queue with segments to send to the user device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktSegCongNetDiscard 1.3.6.1.4.1.16.101.1.2.3.2.1.1.46
Number of segments discarded because of congestion on the queue with segments to send to the network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktSegExcDiscard 1.3.6.1.4.1.16.101.1.2.3.2.1.1.47
Number of segments discarded because the available CIR or EIR credit has been exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktSegUnderszDiscard 1.3.6.1.4.1.16.101.1.2.3.2.1.1.48
Number of segments discarded because the size was less than the minimum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktSegV120ErrDiscard 1.3.6.1.4.1.16.101.1.2.3.2.1.1.49
Number of segments discarded because the V120 header was bad (used with Ad-10 only).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktSegInacPortDiscard 1.3.6.1.4.1.16.101.1.2.3.2.1.1.50
Number of segments discarded because the destination DLCI was inactive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktSegInacNetDiscard 1.3.6.1.4.1.16.101.1.2.3.2.1.1.51
Number of segments discarded because this DLCI was inactive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypTable 1.3.6.1.4.1.16.101.1.2.3.2.2
This section of the MIB does not support getNext.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatChPktBypEntry

restStatChPktBypEntry 1.3.6.1.4.1.16.101.1.2.3.2.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatChPktBypEntry  

restStatChPktBypNodeID 1.3.6.1.4.1.16.101.1.2.3.2.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restStatChPktBypAddr 1.3.6.1.4.1.16.101.1.2.3.2.2.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restStatChPktBypSourceNodeID 1.3.6.1.4.1.16.101.1.2.3.2.2.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restStatChPktBypSourceChAddr 1.3.6.1.4.1.16.101.1.2.3.2.2.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restStatChPktBypDestNodeID 1.3.6.1.4.1.16.101.1.2.3.2.2.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  NodeAddr  

restStatChPktBypDestChAddr 1.3.6.1.4.1.16.101.1.2.3.2.2.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  ChannelAddr  

restStatChPktBypControlMode 1.3.6.1.4.1.16.101.1.2.3.2.2.1.7
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3)  

restStatChPktBypSegmentsToSrc 1.3.6.1.4.1.16.101.1.2.3.2.2.1.8
Number of segments currently queued to be sent to the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktBypSegmentsToDst 1.3.6.1.4.1.16.101.1.2.3.2.2.1.9
Number of segments currently queued to be sent to the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktBypYellowThreshold 1.3.6.1.4.1.16.101.1.2.3.2.2.1.10
Number of segments that can be in any queue before that channel is in yellow congestion mode. This value is 40% of the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktBypRedThreshold 1.3.6.1.4.1.16.101.1.2.3.2.2.1.11
Number of segments that can be in any queue before that channel is in red congestion mode. This value is 86% of the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktBypCritThreshold 1.3.6.1.4.1.16.101.1.2.3.2.2.1.12
Number of segments that can be in any queue before that channel is in critical congestion mode. This value is the maximum number of segments that the queue can contain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatChPktBypInCongMode 1.3.6.1.4.1.16.101.1.2.3.2.2.1.13
Congestion mode of the in queue, which forwards segments to the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), yellow(2), red(3), critical(4)  

restStatChPktBypOutCongMode 1.3.6.1.4.1.16.101.1.2.3.2.2.1.14
Congestion mode of the out queue, which forwards segments to the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), yellow(2), red(3), critical(4)  

restStatChPktBypInCIRSegSent 1.3.6.1.4.1.16.101.1.2.3.2.2.1.15
Number of CIR segments sent from this node to the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInCIRSegRcv 1.3.6.1.4.1.16.101.1.2.3.2.2.1.16
Number of CIR segments received at this node from the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInEIRSegSent 1.3.6.1.4.1.16.101.1.2.3.2.2.1.17
Number of EIR segments sent from this node to the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInEIRSegRcv 1.3.6.1.4.1.16.101.1.2.3.2.2.1.18
Number of EIR segments received at this node from the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInCIROctetSent 1.3.6.1.4.1.16.101.1.2.3.2.2.1.19
Number of CIR octets sent from this node to the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInCIROctetRcv 1.3.6.1.4.1.16.101.1.2.3.2.2.1.20
Number of CIR octets received at this node from the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInEIROctetSent 1.3.6.1.4.1.16.101.1.2.3.2.2.1.21
Number of EIR octets sent from this node to the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInEIROctetRcv 1.3.6.1.4.1.16.101.1.2.3.2.2.1.22
Number of EIR octets received at this node from the source of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInCIRSegDrop 1.3.6.1.4.1.16.101.1.2.3.2.2.1.23
Number of CIR segments received at this node from the source of this channel that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInEIRSegDrop 1.3.6.1.4.1.16.101.1.2.3.2.2.1.24
Number of EIR segments received at this node from the source of this channel that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInCIROctetDrop 1.3.6.1.4.1.16.101.1.2.3.2.2.1.25
Number of CIR octets received at this node from the source of this channel that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypInEIROctetDrop 1.3.6.1.4.1.16.101.1.2.3.2.2.1.26
Number of EIR octets received at this node from the source of this channel that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutCIRSegSent 1.3.6.1.4.1.16.101.1.2.3.2.2.1.27
Number of CIR segments sent from this node to the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutCIRSegRcv 1.3.6.1.4.1.16.101.1.2.3.2.2.1.28
Number of CIR segments received at this node from the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutEIRSegSent 1.3.6.1.4.1.16.101.1.2.3.2.2.1.29
Number of EIR segments sent from this node to the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutEIRSegRcv 1.3.6.1.4.1.16.101.1.2.3.2.2.1.30
Number of EIR segments received at this node from the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutCIROctetSent 1.3.6.1.4.1.16.101.1.2.3.2.2.1.31
Number of CIR octets sent from this node to the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutCIROctetRcv 1.3.6.1.4.1.16.101.1.2.3.2.2.1.32
Number of CIR octets received at this node from the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutEIROctetSent 1.3.6.1.4.1.16.101.1.2.3.2.2.1.33
Number of EIR octets sent from this node to the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutEIROctetRcv 1.3.6.1.4.1.16.101.1.2.3.2.2.1.34
Number of EIR octets received at this node from the destination of this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutCIRSegDrop 1.3.6.1.4.1.16.101.1.2.3.2.2.1.35
Number of CIR segments received at this node from the destination of this channel that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutEIRSegDrop 1.3.6.1.4.1.16.101.1.2.3.2.2.1.36
Number of EIR segments received at this node from the destination of this channel that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutCIROctetDrop 1.3.6.1.4.1.16.101.1.2.3.2.2.1.37
Number of CIR octets received at this node from the destination of this channel that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypOutEIROctetDrop 1.3.6.1.4.1.16.101.1.2.3.2.2.1.38
Number of EIR octets received at this node from the destination of this channel that have been dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypSegSrcEIRDisc 1.3.6.1.4.1.16.101.1.2.3.2.2.1.39
Number of segments from the source of this channel that were discarded because the system was unable to send EIR traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypSegDstEIRDisc 1.3.6.1.4.1.16.101.1.2.3.2.2.1.40
Number of segments from the destination of this channel that were discarded because the system was unable to send EIR traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypSegSrcDstConDsc 1.3.6.1.4.1.16.101.1.2.3.2.2.1.41
Number of segments from the source of this channel that were discarded because the queue of segments to send to the destination was congested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypSegDstSrcConDsc 1.3.6.1.4.1.16.101.1.2.3.2.2.1.42
Number of segments from the destination of this channel that were discarded because the queue of segments to send to the source was congested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypSegInacSrcDisc 1.3.6.1.4.1.16.101.1.2.3.2.2.1.43
Number of segments discarded because the source of this channel was inactive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatChPktBypSegInacDstDisc 1.3.6.1.4.1.16.101.1.2.3.2.2.1.44
Number of segments discarded because the destination of this channel was inactive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatInl 1.3.6.1.4.1.16.101.1.2.3.3
OBJECT IDENTIFIER    

restStatInlTable 1.3.6.1.4.1.16.101.1.2.3.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatInlEntry

restStatInlEntry 1.3.6.1.4.1.16.101.1.2.3.3.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatInlEntry  

restStatInlNumber 1.3.6.1.4.1.16.101.1.2.3.3.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..31  

restStatInlIndex 1.3.6.1.4.1.16.101.1.2.3.3.1.1.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

restStatInlStartTime 1.3.6.1.4.1.16.101.1.2.3.3.1.1.3
Indicates when this statistics interval was started.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

restStatInlPktOctetSent 1.3.6.1.4.1.16.101.1.2.3.3.1.1.4
Number of octets sent across the INL. A value of 0 means that no data is available for that interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatInlPktOctetRcv 1.3.6.1.4.1.16.101.1.2.3.3.1.1.5
Number of octets received across the INL. A value of 0 means that no data is available for that interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

restStatAd10 1.3.6.1.4.1.16.101.1.2.3.4
OBJECT IDENTIFIER    

restStatAd10DataPortTable 1.3.6.1.4.1.16.101.1.2.3.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatAd10DataPortEntry

restStatAd10DataPortEntry 1.3.6.1.4.1.16.101.1.2.3.4.1.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatAd10DataPortEntry  

restStatAd10DataPortAddr 1.3.6.1.4.1.16.101.1.2.3.4.1.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ad10PortAddr  

restStatAd10DataPortControl 1.3.6.1.4.1.16.101.1.2.3.4.1.1.2
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(1), clearBertStats(2)  

restStatAd10DataPortTxTotFrames 1.3.6.1.4.1.16.101.1.2.3.4.1.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortRxTotFrames 1.3.6.1.4.1.16.101.1.2.3.4.1.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortRxFrSeqErr 1.3.6.1.4.1.16.101.1.2.3.4.1.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortRxFrHdrErr 1.3.6.1.4.1.16.101.1.2.3.4.1.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortRxCongDisc 1.3.6.1.4.1.16.101.1.2.3.4.1.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortTxCongDisc 1.3.6.1.4.1.16.101.1.2.3.4.1.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortRxBecnCount 1.3.6.1.4.1.16.101.1.2.3.4.1.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortTxBecnCount 1.3.6.1.4.1.16.101.1.2.3.4.1.1.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortTxSCCOvrRun 1.3.6.1.4.1.16.101.1.2.3.4.1.1.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortRxSCCUndRun 1.3.6.1.4.1.16.101.1.2.3.4.1.1.12
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortTxSCCAbort 1.3.6.1.4.1.16.101.1.2.3.4.1.1.13
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortTxFrOvrSize 1.3.6.1.4.1.16.101.1.2.3.4.1.1.14
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortTxFifoFlCtl 1.3.6.1.4.1.16.101.1.2.3.4.1.1.15
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortRxMinSegHt 1.3.6.1.4.1.16.101.1.2.3.4.1.1.16
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortBertSynLoss 1.3.6.1.4.1.16.101.1.2.3.4.1.1.17
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortBertByteCnt 1.3.6.1.4.1.16.101.1.2.3.4.1.1.18
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10DataPortBertBitErr 1.3.6.1.4.1.16.101.1.2.3.4.1.1.19
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10VoicePortTable 1.3.6.1.4.1.16.101.1.2.3.4.2
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatAd10VoicePortEntry

restStatAd10VoicePortEntry 1.3.6.1.4.1.16.101.1.2.3.4.2.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatAd10VoicePortEntry  

restStatAd10VoicePortAddr 1.3.6.1.4.1.16.101.1.2.3.4.2.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ad10PortAddr  

restStatAd10VoicePortControl 1.3.6.1.4.1.16.101.1.2.3.4.2.1.2
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(1), clearBertStats(2)  

restStatAd10VoicePortHber 1.3.6.1.4.1.16.101.1.2.3.4.2.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10VoicePortSyncLoss 1.3.6.1.4.1.16.101.1.2.3.4.2.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10VoicePortBertByte 1.3.6.1.4.1.16.101.1.2.3.4.2.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10VoicePortBertBitErr 1.3.6.1.4.1.16.101.1.2.3.4.2.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10PktBandTable 1.3.6.1.4.1.16.101.1.2.3.4.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatAd10PktBandEntry

restStatAd10PktBandEntry 1.3.6.1.4.1.16.101.1.2.3.4.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatAd10PktBandEntry  

restStatAd10PktBandAddr 1.3.6.1.4.1.16.101.1.2.3.4.3.1.1
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ad10PortAddr  

restStatAd10PktBandControl 1.3.6.1.4.1.16.101.1.2.3.4.3.1.2
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(1)  

restStatAd10PktBandTxTotFrames 1.3.6.1.4.1.16.101.1.2.3.4.3.1.3
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10PktBandRxTotFrames 1.3.6.1.4.1.16.101.1.2.3.4.3.1.4
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10PktBandRxFrErr 1.3.6.1.4.1.16.101.1.2.3.4.3.1.5
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10PktBandRxSCCOvrRun 1.3.6.1.4.1.16.101.1.2.3.4.3.1.6
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10PktBandTxSCCUndRun 1.3.6.1.4.1.16.101.1.2.3.4.3.1.7
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10PktBandRxSCCAbort 1.3.6.1.4.1.16.101.1.2.3.4.3.1.8
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10PktBandRxInvDlci 1.3.6.1.4.1.16.101.1.2.3.4.3.1.9
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10PktBandRxFrOvrSize 1.3.6.1.4.1.16.101.1.2.3.4.3.1.10
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatAd10PktBandRxCrcErr 1.3.6.1.4.1.16.101.1.2.3.4.3.1.11
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatModule 1.3.6.1.4.1.16.101.1.2.3.5
OBJECT IDENTIFIER    

restStatModDsmTable 1.3.6.1.4.1.16.101.1.2.3.5.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RestStatModDsmEntry

restStatModDsmEntry 1.3.6.1.4.1.16.101.1.2.3.5.1.1
INTRODUCED 2.0.0
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RestStatModDsmEntry  

restStatModDsmAddr 1.3.6.1.4.1.16.101.1.2.3.5.1.1.1
Address of a DSM module. The format of the address is nest.slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotAddr  

restStatModDsmControlMode 1.3.6.1.4.1.16.101.1.2.3.5.1.1.2
Setting this field to clearStats will reset all of the counters in this MIB section to zero.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER clearStats(3)  

restStatModDsmRejectOrigCalls 1.3.6.1.4.1.16.101.1.2.3.5.1.1.3
Number of calls initiated by a local ISPBX that were rejected for any reason.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

restStatModDsmRejectTermCalls 1.3.6.1.4.1.16.101.1.2.3.5.1.1.4
Number of calls initiated by a DSM that would be terminated on this DSM and that were rejected for any reason.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

alPartitionHeader 1.3.6.1.4.1.16.101.1.3.1
OBJECT IDENTIFIER    

alPartitionControl 1.3.6.1.4.1.16.101.1.3.1.1
Parameter Type = Immediate.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER validateCRC(1), invalidateCRC(2)  

alPartitionCRCCheck 1.3.6.1.4.1.16.101.1.3.1.2
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER succeed(1), fail(2)  

alPartitionFlushMode 1.3.6.1.4.1.16.101.1.3.1.3
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alSystemProfile 1.3.6.1.4.1.16.101.1.3.2
OBJECT IDENTIFIER    

alSysLogSize 1.3.6.1.4.1.16.101.1.3.2.1
Parameter Type = Immediate. Assign the size to each of the 32 alarm logs. The sizes are specified in units of Kbytes. The total size cannot exceed 128K bytes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

alSysLogSizeAvailable 1.3.6.1.4.1.16.101.1.3.2.2
Parameter Type = Internal. The amount of remaining alarm log space in units of Kbytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alLogTable 1.3.6.1.4.1.16.101.1.3.3
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlLogEntry

alLogEntry 1.3.6.1.4.1.16.101.1.3.3.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlLogEntry  

alLogIndex 1.3.6.1.4.1.16.101.1.3.3.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

alLogDiagnostics 1.3.6.1.4.1.16.101.1.3.3.1.2
Parameter Type = Immediate.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER enableNotification(1), disableNotification(2), clearAlarmLog(3), disableLogging(4), clearOverflow(5)  

alLogState 1.3.6.1.4.1.16.101.1.3.3.1.3
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notificationOn(1), notificationOff(2), notificationOnWoverflow(3), notificationOffWoverflow(4), loggingDisabled(5)  

alLogTotalEntries 1.3.6.1.4.1.16.101.1.3.3.1.4
Parameter Type = Internal. The number of outstanding alarms contained within this alarm log.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alLogAvailableEntries 1.3.6.1.4.1.16.101.1.3.3.1.5
Parameter Type = Internal. The total number of available entries in the alarm log. This is based on the size of the alarm log.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

alLogNotificationList 1.3.6.1.4.1.16.101.1.3.3.1.6
Parameter Type = Immediate. Specifies root nodes that should receive alarm notifications for alarms in this log. These root nodes will send traps to EMS stations based upon their own trap access tables. Up to 16 root node address can be specified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

alLogClearEntries 1.3.6.1.4.1.16.101.1.3.3.1.7
Parameter Type = Immediate. Set this field to the number of alarm entries you wish to clear from the top of the log.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER  

alLogPartitionID 1.3.6.1.4.1.16.101.1.3.3.1.8
Parameter Type = Immediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

alLogRecTable 1.3.6.1.4.1.16.101.1.3.4
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlLogRecEntry

alLogRecEntry 1.3.6.1.4.1.16.101.1.3.4.1
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AlLogRecEntry  

alLogRecIndex 1.3.6.1.4.1.16.101.1.3.4.1.1
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RecordIndex  

alLogRecContents 1.3.6.1.4.1.16.101.1.3.4.1.2
Parameter Type = Internal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AlarmRecord  

alTrapContents 1.3.6.1.4.1.16.101.1.3.5
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(10)