STN-PPTP-TRAP-MIB

File: STN-PPTP-TRAP-MIB.mib (8587 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SPRING-TIDE-NETWORKS-SMI STN-PPTP-MIB STN-CHASSIS-MIB
STN-ROUTER-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress DisplayString MODULE-COMPLIANCE
OBJECT-GROUP stnNotification stnPptpTraps
stnEngineIndex stnEngineSlot stnEngineCpu
stnRouterIndex stnSubnetInterfaceIndex

Defined Values

stnPptpTrap 1.3.6.1.4.1.3551.4.1.10.3.1
This MIB module describes the traps for Spring Tide Networks PPTP.
MODULE-IDENTITY    

stnPptpTrapVars 1.3.6.1.4.1.3551.4.1.10.3.1.1
OBJECT IDENTIFIER    

stnPptpNotificationPrefix 1.3.6.1.4.1.3551.4.1.10.3.1.2
OBJECT IDENTIFIER    

stnPptpNotification 1.3.6.1.4.1.3551.4.1.10.3.1.2.0
OBJECT IDENTIFIER    

stnPptpTunnelLocalHostname 1.3.6.1.4.1.3551.4.1.10.3.1.1.1
This object contains the host name supplied during the tunnel establishment phase to the PPTP peer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpTunnelLocalIpAddress 1.3.6.1.4.1.3551.4.1.10.3.1.1.2
This object contains the local IP address of the tunnel endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

stnPptpTunnelRemoteHostname 1.3.6.1.4.1.3551.4.1.10.3.1.1.3
This object contains the host name as discovered during the tunnel establishment phase of the PPTP peer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

stnPptpTunnelRemoteIpAddress 1.3.6.1.4.1.3551.4.1.10.3.1.1.4
This object contains the IP address of the remote tunnel endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

stnTunnelPptpAuthenFailure 1.3.6.1.4.1.3551.4.1.10.3.1.2.0.1
A stnTunnelPptpAuthenFailure trap signifies that the agent entity has detected an attempt to establish a tunnel to a remote peer has failed authentication. The generation of this trap can be controlled by the PPTPTraps configuration object.
Status: current Access: read-only
NOTIFICATION-TYPE    

stnTunnelPptpLimitExceeded 1.3.6.1.4.1.3551.4.1.10.3.1.2.0.2
A stnTunnelPptpLimitExceeded trap signifies that the agent entity has detected that the number of PPTP tunnels allowed on the indicated slot/cpu has been exceeded. The generation of this trap can be controlled by the PPTPTraps configuration object.
Status: current Access: read-only
NOTIFICATION-TYPE    

stnTunnelPacProvLimitExceeded 1.3.6.1.4.1.3551.4.1.10.3.1.2.0.3
A stnTunnelPacProvLimitExceeded trap signifies that the agent entity has detected that the number of PPTP locally initiated tunnels allowed by the provisioner has been exceeded for the indicated router. The generation of this trap can be controlled by the PPTPTraps configuration object.
Status: current Access: read-only
NOTIFICATION-TYPE    

stnTunnelPnsProvLimitExceeded 1.3.6.1.4.1.3551.4.1.10.3.1.2.0.4
A stnTunnelPnsProvLimitExceeded trap signifies that the agent entity has detected that the number of PPTP remotely initiated tunnels allowed by the provisioner has been exceeded for the indicated router. The generation of this trap can be controlled by the PPTPTraps configuration object.
Status: current Access: read-only
NOTIFICATION-TYPE    

stnCallPptpLimitExceeded 1.3.6.1.4.1.3551.4.1.10.3.1.2.0.5
A stnCallPptpLimitExceeded trap signifies that the agent entity has detected that the number of PPTP calls allowed on the indicated slot/cpu has been exceeded. The generation of this trap can be controlled by the PPTPTraps configuration object.
Status: current Access: read-only
NOTIFICATION-TYPE    

stnCallPacProvLimitExceeded 1.3.6.1.4.1.3551.4.1.10.3.1.2.0.6
A stnCallPacProvLimitExceeded trap signifies that the agent entity has detected that the number of PPTP locally initiated calls allowed by the provisioner has been exceeded for the indicated router. The generation of this trap can be controlled by the PPTPTraps configuration object.
Status: current Access: read-only
NOTIFICATION-TYPE    

stnCallPnsProvLimitExceeded 1.3.6.1.4.1.3551.4.1.10.3.1.2.0.7
A stnCallPnsProvLimitExceeded trap signifies that the agent entity has detected that the number of PPTP remotely initiated calls allowed by the provisioner has been exceeded for the indicated router. The generation of this trap can be controlled by the PPTPTraps configuration object.
Status: current Access: read-only
NOTIFICATION-TYPE