SYSINFO-MIB

File: SYSINFO-MIB.mib (274423 bytes)

Imported modules

RFC1155-SMI

RFC1213-MIB

RFC-1212

Imported symbols

enterprises	Counter	Gauge
TimeTicks	IpAddress	DisplayString
PhysAddress	OBJECT-TYPE

Defined Types

SmSiaResourceUsageEntry
SEQUENCE
	smSiaResourceUsageName	DisplayString
	smSiaResourceUsageUserTime	TimeTicks
	smSiaResourceUsageSystemTime	TimeTicks
	smSiaResourceUsageTotalTime	TimeTicks
	smSiaResourceUsageMaxrss	Counter
	smSiaResourceUsageIxrss	Counter
	smSiaResourceUsageIdrss	Counter
	smSiaResourceUsageIsrss	Counter
	smSiaResourceUsageMinflt	Counter
	smSiaResourceUsageMajflt	Counter
	smSiaResourceUsageNSwap	Counter
	smSiaResourceUsageInBlock	Counter
	smSiaResourceUsageOutBlock	Counter
	smSiaResourceUsageMsgsnd	Counter
	smSiaResourceUsageMsgrcv	Counter
	smSiaResourceUsageNSignals	Counter
	smSiaResourceUsageVcsw	Counter
	smSiaResourceUsageIcsw	Counter

SmSiaProgramMessagesEntry
SEQUENCE
	smSiaProgramMessagesRowNumber	INTEGER
	smSiaProgramMessagesTime	DisplayString
	smSiaProgramMessagesText	DisplayString
	smSiaProgramMessagesTimeStamp	INTEGER

SmSiaSystemPagingSpaceEntry
SEQUENCE
	smSiaSystemPagingSpaceName	DisplayString
	smSiaSystemPagingSpacePhysicalVolume	DisplayString
	smSiaSystemPagingSpaceVolumeGroup	DisplayString
	smSiaSystemPagingSpaceSize	INTEGER
	smSiaSystemPagingSpacePercentUsed	Gauge
	smSiaSystemPagingSpaceActive	DisplayString
	smSiaSystemPagingSpaceAuto	DisplayString
	smSiaSystemPagingSpaceType	DisplayString

SmSiaSystemPagingStatisticsEntry
SEQUENCE
	smSiaSystemPagingStatisticsName	DisplayString
	smSiaSystemPagingStatisticsIntervalStartTime	DisplayString
	smSiaSystemPagingStatisticsIntervalLength	TimeTicks
	smSiaSystemPagingStatisticsPageFaults	INTEGER
	smSiaSystemPagingStatisticsPageReclaims	INTEGER
	smSiaSystemPagingStatisticsPagesPagedIn	INTEGER
	smSiaSystemPagingStatisticsPagesPagedOut	INTEGER
	smSiaSystemPagingStatisticsPageInsFromPagingSpace	INTEGER
	smSiaSystemPagingStatisticsPageOutsFromPagingSpace	INTEGER
	smSiaSystemPagingStatisticsStartIOs	INTEGER
	smSiaSystemPagingStatisticsDoneIOs	INTEGER
	smSiaSystemPagingStatisticsPageScans	INTEGER
	smSiaSystemPagingStatisticsScanClockCycles	INTEGER
	smSiaSystemPagingStatisticsPageSteals	INTEGER
	smSiaSystemPagingStatisticsFreeFrameWaits	INTEGER
	smSiaSystemPagingStatisticsExtendXPTWaits	INTEGER
	smSiaSystemPagingStatisticsPendingIOWaits	INTEGER
	smSiaSystemPagingStatisticsPageFaultsMinimum	INTEGER
	smSiaSystemPagingStatisticsPageReclaimsMinimum	INTEGER
	smSiaSystemPagingStatisticsPagesPagedInMinimum	INTEGER
	smSiaSystemPagingStatisticsPagesPagedOutMinimum	INTEGER
	smSiaSystemPagingStatisticsPageInsFromPagingSpaceMinimum	INTEGER
	smSiaSystemPagingStatisticsPageOutsFromPagingSpaceMinimum	INTEGER
	smSiaSystemPagingStatisticsStartIOsMinimum	INTEGER
	smSiaSystemPagingStatisticsDoneIOsMinimum	INTEGER
	smSiaSystemPagingStatisticsPageScansMinimum	INTEGER
	smSiaSystemPagingStatisticsScanClockCyclesMinimum	INTEGER
	smSiaSystemPagingStatisticsPageStealsMinimum	INTEGER
	smSiaSystemPagingStatisticsFreeFrameWaitsMinimum	INTEGER
	smSiaSystemPagingStatisticsExtendXPTWaitsMinimum	INTEGER
	smSiaSystemPagingStatisticsPendingIOWaitsMinimum	INTEGER
	smSiaSystemPagingStatisticsPageFaultsMaximum	INTEGER
	smSiaSystemPagingStatisticsPageReclaimsMaximum	INTEGER
	smSiaSystemPagingStatisticsPagesPagedInMaximum	INTEGER
	smSiaSystemPagingStatisticsPagesPagedOutMaximum	INTEGER
	smSiaSystemPagingStatisticsPageInsFromPagingSpaceMaximum	INTEGER
	smSiaSystemPagingStatisticsPageOutsFromPagingSpaceMaximum	INTEGER
	smSiaSystemPagingStatisticsStartIOsMaximum	INTEGER
	smSiaSystemPagingStatisticsDoneIOsMaximum	INTEGER
	smSiaSystemPagingStatisticsPageScansMaximum	INTEGER
	smSiaSystemPagingStatisticsScanClockCyclesMaximum	INTEGER
	smSiaSystemPagingStatisticsPageStealsMaximum	INTEGER
	smSiaSystemPagingStatisticsFreeFrameWaitsMaximum	INTEGER
	smSiaSystemPagingStatisticsExtendXPTWaitsMaximum	INTEGER
	smSiaSystemPagingStatisticsPendingIOWaitsMaximum	INTEGER

SmSiaSystemDeviceListEntry
SEQUENCE
	smSiaSystemDeviceListName	DisplayString
	smSiaSystemDeviceListDescription	DisplayString
	smSiaSystemDeviceListLocation	DisplayString
	smSiaSystemDeviceListVPD	DisplayString
	smSiaSystemDeviceListAttributes	DisplayString
	smSiaSystemDeviceListDiagnostics	DisplayString

SmSiaSystemDeviceTokenRingEntry
SEQUENCE
	smSiaSystemDeviceTokenRingNumber	INTEGER
	smSiaSystemDeviceTokenRingHardwareAddress	PhysAddress
	smSiaSystemDeviceTokenRingCurrentAddress	PhysAddress
	smSiaSystemDeviceTokenRingReceiveDataOffset	INTEGER
	smSiaSystemDeviceTokenRingBroadwrap	INTEGER
	smSiaSystemDeviceTokenRingTxByteMcnt	Counter
	smSiaSystemDeviceTokenRingTxByteLcnt	Counter
	smSiaSystemDeviceTokenRingRxByteMcnt	Counter
	smSiaSystemDeviceTokenRingRxByteLcnt	Counter
	smSiaSystemDeviceTokenRingTxFrameMcnt	Counter
	smSiaSystemDeviceTokenRingTxFrameLcnt	Counter
	smSiaSystemDeviceTokenRingRxFrameMcnt	Counter
	smSiaSystemDeviceTokenRingRxFrameLcnt	Counter
	smSiaSystemDeviceTokenRingTxErrCnt	Counter
	smSiaSystemDeviceTokenRingRxErrCnt	Counter
	smSiaSystemDeviceTokenRingNidTblHigh	INTEGER
	smSiaSystemDeviceTokenRingTxQueHigh	Gauge
	smSiaSystemDeviceTokenRingRxQueHigh	Gauge
	smSiaSystemDeviceTokenRingStaQueHigh	Gauge
	smSiaSystemDeviceTokenRingIntrLost	Counter
	smSiaSystemDeviceTokenRingWdtLost	Counter
	smSiaSystemDeviceTokenRingTimoLost	Counter
	smSiaSystemDeviceTokenRingStaQueOverflow	Counter
	smSiaSystemDeviceTokenRingRxQueOverflow	Counter
	smSiaSystemDeviceTokenRingRxQueNoMbuf	Counter
	smSiaSystemDeviceTokenRingRxQueNoMbufExt	Counter
	smSiaSystemDeviceTokenRingTxIntrCnt	Counter
	smSiaSystemDeviceTokenRingRxIntrCnt	Counter
	smSiaSystemDeviceTokenRingPktRejCnt	Counter
	smSiaSystemDeviceTokenRingPktAccCnt	Counter
	smSiaSystemDeviceTokenRingPktTxCnt	Counter
	smSiaSystemDeviceTokenRingOvfloPktCnt	Counter
	smSiaSystemDeviceTokenRingPktTxErrCnt	Counter
	smSiaSystemDeviceTokenRingSpeed	INTEGER
	smSiaSystemDeviceTokenRingVPD	DisplayString
	smSiaSystemDeviceTokenRingAdapPhysAddr	PhysAddress
	smSiaSystemDeviceTokenRingUpstreamNodeAddr	PhysAddress
	smSiaSystemDeviceTokenRingUpstreamPhysAddr	PhysAddress
	smSiaSystemDeviceTokenRingLastPollAddr	PhysAddress
	smSiaSystemDeviceTokenRingAuthorEnv	INTEGER
	smSiaSystemDeviceTokenRingTxAccessPriority	INTEGER
	smSiaSystemDeviceTokenRingSrcClassAuthor	INTEGER
	smSiaSystemDeviceTokenRingLastAttenCode	INTEGER
	smSiaSystemDeviceTokenRingLastSrcAddr	PhysAddress
	smSiaSystemDeviceTokenRingLastBeaconType	INTEGER
	smSiaSystemDeviceTokenRingLastMajorVector	INTEGER
	smSiaSystemDeviceTokenRingRingStatus	INTEGER
	smSiaSystemDeviceTokenRingSoftErrorTimerVal	INTEGER
	smSiaSystemDeviceTokenRingFrontEndTimerVal	INTEGER
	smSiaSystemDeviceTokenRingMonitorErrorCode	INTEGER
	smSiaSystemDeviceTokenRingBeaconTxType	INTEGER
	smSiaSystemDeviceTokenRingBeaconRxType	INTEGER
	smSiaSystemDeviceTokenRingFrameCorrSave	INTEGER
	smSiaSystemDeviceTokenRingBeaconStationNAUN	PhysAddress
	smSiaSystemDeviceTokenRingBeaconStationPhysAddr	PhysAddress
	smSiaSystemDeviceTokenRingClear	INTEGER

SmSiaSystemDeviceEthernetEntry
SEQUENCE
	smSiaSystemDeviceEthernetNumber	INTEGER
	smSiaSystemDeviceEthernetHardwareAddress	PhysAddress
	smSiaSystemDeviceEthernetCurrentAddress	PhysAddress
	smSiaSystemDeviceEthernetReceiveDataOffset	INTEGER
	smSiaSystemDeviceEthernetBroadwrap	INTEGER
	smSiaSystemDeviceEthernetTxByteMcnt	Counter
	smSiaSystemDeviceEthernetTxByteLcnt	Counter
	smSiaSystemDeviceEthernetRxByteMcnt	Counter
	smSiaSystemDeviceEthernetRxByteLcnt	Counter
	smSiaSystemDeviceEthernetTxFrameMcnt	Counter
	smSiaSystemDeviceEthernetTxFrameLcnt	Counter
	smSiaSystemDeviceEthernetRxFrameMcnt	Counter
	smSiaSystemDeviceEthernetRxFrameLcnt	Counter
	smSiaSystemDeviceEthernetTxErrCnt	Counter
	smSiaSystemDeviceEthernetRxErrCnt	Counter
	smSiaSystemDeviceEthernetNidTblHigh	INTEGER
	smSiaSystemDeviceEthernetTxQueHigh	Gauge
	smSiaSystemDeviceEthernetRxQueHigh	Gauge
	smSiaSystemDeviceEthernetStaQueHigh	Gauge
	smSiaSystemDeviceEthernetIntrLost	Counter
	smSiaSystemDeviceEthernetWdtLost	Counter
	smSiaSystemDeviceEthernetTimoLost	Counter
	smSiaSystemDeviceEthernetStaQueOverflow	Counter
	smSiaSystemDeviceEthernetRxQueOverflow	Counter
	smSiaSystemDeviceEthernetRxQueNoMbuf	Counter
	smSiaSystemDeviceEthernetRxQueNoMbufExt	Counter
	smSiaSystemDeviceEthernetTxIntrCnt	Counter
	smSiaSystemDeviceEthernetRxIntrCnt	Counter
	smSiaSystemDeviceEthernetCRCErr	Counter
	smSiaSystemDeviceEthernetAlignErr	Counter
	smSiaSystemDeviceEthernetOverrun	Counter
	smSiaSystemDeviceEthernetTooShort	Counter
	smSiaSystemDeviceEthernetTooLong	Counter
	smSiaSystemDeviceEthernetNoResources	Counter
	smSiaSystemDeviceEthernetPktDiscard	Counter
	smSiaSystemDeviceEthernetMaxCollision	Counter
	smSiaSystemDeviceEthernetLateCollision	Counter
	smSiaSystemDeviceEthernetCarrierLost	Counter
	smSiaSystemDeviceEthernetUnderrun	Counter
	smSiaSystemDeviceEthernetCTSLost	Counter
	smSiaSystemDeviceEthernetTxTimeouts	Counter
	smSiaSystemDeviceEthernetParErrCnt	Counter
	smSiaSystemDeviceEthernetDiagOverflow	Counter
	smSiaSystemDeviceEthernetExecOverflow	Counter
	smSiaSystemDeviceEthernetExecCmdErrors	Counter
	smSiaSystemDeviceEthernetHostRecEol	Counter
	smSiaSystemDeviceEthernetAdptRecEol	Counter
	smSiaSystemDeviceEthernetHostRecPkt	Counter
	smSiaSystemDeviceEthernetAdptRecPkt	Counter
	smSiaSystemDeviceEthernetStartRxCmd	Counter
	smSiaSystemDeviceEthernetStartRxDmaTimeouts	Counter
	smSiaSystemDeviceEthernetVPD	DisplayString
	smSiaSystemDeviceEthernetClear	INTEGER

SmSiaSystemDeviceX25Entry
SEQUENCE
	smSiaSystemDeviceX25Number	INTEGER
	smSiaSystemDeviceX25Address	DisplayString
	smSiaSystemDeviceX25SupportLevel	INTEGER
	smSiaSystemDeviceX25SupportedFacilities	INTEGER
	smSiaSystemDeviceX25NetworkId	PhysAddress
	smSiaSystemDeviceX25MaxTxPacketSize	INTEGER
	smSiaSystemDeviceX25MaxRxPacketSize	INTEGER
	smSiaSystemDeviceX25DefaultSvcTxPacketSize	INTEGER
	smSiaSystemDeviceX25DefaultSvcRxPacketSize	INTEGER
	smSiaSystemDeviceX25ReceiveDataTransferOffset	INTEGER
	smSiaSystemDeviceX25MemoryWindowSize	INTEGER
	smSiaSystemDeviceX25TxByteMcnt	Counter
	smSiaSystemDeviceX25TxByteLcnt	Counter
	smSiaSystemDeviceX25RxByteMcnt	Counter
	smSiaSystemDeviceX25RxByteLcnt	Counter
	smSiaSystemDeviceX25TxFrameMcnt	Counter
	smSiaSystemDeviceX25TxFrameLcnt	Counter
	smSiaSystemDeviceX25RxFrameMcnt	Counter
	smSiaSystemDeviceX25RxFrameLcnt	Counter
	smSiaSystemDeviceX25TxErrCnt	Counter
	smSiaSystemDeviceX25RxErrCnt	Counter
	smSiaSystemDeviceX25NidTblHigh	INTEGER
	smSiaSystemDeviceX25TxQueHigh	Gauge
	smSiaSystemDeviceX25RxQueHigh	Gauge
	smSiaSystemDeviceX25StaQueHigh	Gauge
	smSiaSystemDeviceX25IgnoredFTx	Counter
	smSiaSystemDeviceX25RrFTx	Counter
	smSiaSystemDeviceX25RnrFTx	Counter
	smSiaSystemDeviceX25RejFTx	Counter
	smSiaSystemDeviceX25InfoFTx	Counter
	smSiaSystemDeviceX25SabmFTx	Counter
	smSiaSystemDeviceX25SarmDmFTx	Counter
	smSiaSystemDeviceX25DiscFTx	Counter
	smSiaSystemDeviceX25UaFTx	Counter
	smSiaSystemDeviceX25FrmrFTx	Counter
	smSiaSystemDeviceX25BadNrFTx	Counter
	smSiaSystemDeviceX25UnknownFTx	Counter
	smSiaSystemDeviceX25XidFTx	Counter
	smSiaSystemDeviceX25BadLengthFTx	Counter
	smSiaSystemDeviceX25T1Expirations	Counter
	smSiaSystemDeviceX25Lvl2Connects	Counter
	smSiaSystemDeviceX25Lvl2Disconnects	Counter
	smSiaSystemDeviceX25CarrierLoss	Counter
	smSiaSystemDeviceX25ConnectTime	TimeTicks
	smSiaSystemDeviceX25T4Expirations	Counter
	smSiaSystemDeviceX25T4N2Times	Counter
	smSiaSystemDeviceX25IgnoredFRx	Counter
	smSiaSystemDeviceX25RrFRx	Counter
	smSiaSystemDeviceX25RnrFRx	Counter
	smSiaSystemDeviceX25RejFRx	Counter
	smSiaSystemDeviceX25InfoFRx	Counter
	smSiaSystemDeviceX25SabmFRx	Counter
	smSiaSystemDeviceX25SarmDmFRx	Counter
	smSiaSystemDeviceX25DiscFRx	Counter
	smSiaSystemDeviceX25UaFRx	Counter
	smSiaSystemDeviceX25FrmrFRx	Counter
	smSiaSystemDeviceX25BadNrFRx	Counter
	smSiaSystemDeviceX25UnknownFRx	Counter
	smSiaSystemDeviceX25XidFRx	Counter
	smSiaSystemDeviceX25BadLengthFRx	Counter
	smSiaSystemDeviceX25DataPTx	Counter
	smSiaSystemDeviceX25RrPTx	Counter
	smSiaSystemDeviceX25RnrPTx	Counter
	smSiaSystemDeviceX25InterruptPTx	Counter
	smSiaSystemDeviceX25InterruptConfirmPTx	Counter
	smSiaSystemDeviceX25CallRequestPTx	Counter
	smSiaSystemDeviceX25CallAcceptPTx	Counter
	smSiaSystemDeviceX25ClearRequestPTx	Counter
	smSiaSystemDeviceX25ClearConfirmPTx	Counter
	smSiaSystemDeviceX25ResetRequestPTx	Counter
	smSiaSystemDeviceX25ResetConfirmPTx	Counter
	smSiaSystemDeviceX25DiagnosticPTx	Counter
	smSiaSystemDeviceX25RegistrationPTx	Counter
	smSiaSystemDeviceX25RegistrationConfirmPTx	Counter
	smSiaSystemDeviceX25RestartPTx	Counter
	smSiaSystemDeviceX25RestartConfirmPTx	Counter
	smSiaSystemDeviceX25ErrorPTx	Counter
	smSiaSystemDeviceX25T20Expirations	Counter
	smSiaSystemDeviceX25T21Expirations	Counter
	smSiaSystemDeviceX25T22Expirations	Counter
	smSiaSystemDeviceX25T23Expirations	Counter
	smSiaSystemDeviceX25VcEstablishments	Counter
	smSiaSystemDeviceX25T24Expirations	Counter
	smSiaSystemDeviceX25T25Expirations	Counter
	smSiaSystemDeviceX25T26Expirations	Counter
	smSiaSystemDeviceX25T28Expirations	Counter
	smSiaSystemDeviceX25DataPRx	Counter
	smSiaSystemDeviceX25RrPRx	Counter
	smSiaSystemDeviceX25RnrPRx	Counter
	smSiaSystemDeviceX25InterruptPRx	Counter
	smSiaSystemDeviceX25InterruptConfirmPRx	Counter
	smSiaSystemDeviceX25IncomingCallPRx	Counter
	smSiaSystemDeviceX25CallConnectedPRx	Counter
	smSiaSystemDeviceX25ClearIndicationPRx	Counter
	smSiaSystemDeviceX25ClearConfirmPRx	Counter
	smSiaSystemDeviceX25ResetIndicationPRx	Counter
	smSiaSystemDeviceX25ResetConfirmPRx	Counter
	smSiaSystemDeviceX25DiagnosticPRx	Counter
	smSiaSystemDeviceX25RegistrationPRx	Counter
	smSiaSystemDeviceX25RegistrationConfirmPRx	Counter
	smSiaSystemDeviceX25RestartPRx	Counter
	smSiaSystemDeviceX25RestartConfirmPRx	Counter
	smSiaSystemDeviceX25TxUnknownSize	Counter
	smSiaSystemDeviceX25TxReserved1	Counter
	smSiaSystemDeviceX25TxReserved2	Counter
	smSiaSystemDeviceX25TxReserved3	Counter
	smSiaSystemDeviceX25Tx0x15	Counter
	smSiaSystemDeviceX25Tx16x31	Counter
	smSiaSystemDeviceX25Tx32x63	Counter
	smSiaSystemDeviceX25Tx64x127	Counter
	smSiaSystemDeviceX25Tx128x255	Counter
	smSiaSystemDeviceX25Tx256x511	Counter
	smSiaSystemDeviceX25Tx512x1023	Counter
	smSiaSystemDeviceX25Tx1024x2047	Counter
	smSiaSystemDeviceX25Tx2048x4095	Counter
	smSiaSystemDeviceX25TxReserved13	Counter
	smSiaSystemDeviceX25TxReserved14	Counter
	smSiaSystemDeviceX25TxReserved15	Counter
	smSiaSystemDeviceX25TxTotalPackets	Counter
	smSiaSystemDeviceX25RxUnknownSize	Counter
	smSiaSystemDeviceX25RxReserved1	Counter
	smSiaSystemDeviceX25RxReserved2	Counter
	smSiaSystemDeviceX25RxReserved3	Counter
	smSiaSystemDeviceX25Rx0x15	Counter
	smSiaSystemDeviceX25Rx16x31	Counter
	smSiaSystemDeviceX25Rx32x63	Counter
	smSiaSystemDeviceX25Rx64x127	Counter
	smSiaSystemDeviceX25Rx128x255	Counter
	smSiaSystemDeviceX25Rx256x511	Counter
	smSiaSystemDeviceX25Rx512x1023	Counter
	smSiaSystemDeviceX25Rx1024x2047	Counter
	smSiaSystemDeviceX25Rx2048x4095	Counter
	smSiaSystemDeviceX25RxReserved13	Counter
	smSiaSystemDeviceX25RxReserved14	Counter
	smSiaSystemDeviceX25RxReserved15	Counter
	smSiaSystemDeviceX25RxTotalPackets	Counter
	smSiaSystemDeviceX25Clear	INTEGER

SmSiaSystemDeviceX25RouteEntry
SEQUENCE
	smSiaSystemDeviceX25RouteNumber	INTEGER
	smSiaSystemDeviceX25RouteEntryName	DisplayString
	smSiaSystemDeviceX25RouteUserName	DisplayString
	smSiaSystemDeviceX25RoutePort	DisplayString
	smSiaSystemDeviceX25RouteCallingAddress	DisplayString
	smSiaSystemDeviceX25RouteCalledSubaddress	DisplayString
	smSiaSystemDeviceX25RouteCallingAddressExt	DisplayString
	smSiaSystemDeviceX25RouteCalledAddressExt	DisplayString
	smSiaSystemDeviceX25RouteCalledUserData	DisplayString
	smSiaSystemDeviceX25RoutePriority	INTEGER
	smSiaSystemDeviceX25RouteAction	INTEGER

SmSiaSystemFileSystemEntry
SEQUENCE
	smSiaSystemFileSystemName	DisplayString
	smSiaSystemFileSystemSize	Gauge
	smSiaSystemFileSystemFree	Gauge
	smSiaSystemFileSystemPercentUsed	Gauge
	smSiaSystemFileSystemInodesUsed	Gauge
	smSiaSystemFileSystemInodesPercentUsed	Gauge
	smSiaSystemFileSystemInodeCount	Gauge
	smSiaSystemFileSystemFileSystem	DisplayString
	smSiaSystemFileSystemRemote	DisplayString

SmSiaSystemSubSystemsEntry
SEQUENCE
	smSiaSystemSubSystemsName	DisplayString
	smSiaSystemSubSystemsPID	INTEGER
	smSiaSystemSubSystemsStatusDescription	DisplayString
	smSiaSystemSubSystemsStatusText	DisplayString
	smSiaSystemSubSystemsStatusCode	INTEGER

SmSiaSystemProcessEntry
SEQUENCE
	smSiaSystemProcessLoginUser	DisplayString
	smSiaSystemProcessPID	INTEGER
	smSiaSystemProcessParentPID	INTEGER
	smSiaSystemProcessCPUTime	TimeTicks
	smSiaSystemProcessUserTime	TimeTicks
	smSiaSystemProcessSystemTime	TimeTicks
	smSiaSystemProcessPageFaultsIO	Counter
	smSiaSystemProcessPageFaultsNoIO	Counter
	smSiaSystemProcessPriority	INTEGER
	smSiaSystemProcessNice	INTEGER
	smSiaSystemProcessState	INTEGER
	smSiaSystemProcessWait	INTEGER
	smSiaSystemProcessDataResidentSetSize	INTEGER
	smSiaSystemProcessTextResidentSetSize	INTEGER
	smSiaSystemProcessDataVirtualMemorySize	INTEGER
	smSiaSystemProcessImageSize	INTEGER
	smSiaSystemProcessPercentMemory	INTEGER
	smSiaSystemProcessCPU	INTEGER
	smSiaSystemProcessStartTime	DisplayString
	smSiaSystemProcessCommand	DisplayString
	smSiaSystemProcessLoginUID	INTEGER
	smSiaSystemProcessEffectiveUID	INTEGER
	smSiaSystemProcessEffectiveGID	INTEGER
	smSiaSystemProcessEffectiveGroupName	DisplayString
	smSiaSystemProcessSUID	INTEGER
	smSiaSystemProcessPgrp	INTEGER
	smSiaSystemProcessPFlags	INTEGER
	smSiaSystemProcessAdspace	Gauge
	smSiaSystemProcessTTYp	INTEGER
	smSiaSystemProcessTTYd	INTEGER
	smSiaSystemProcessNSwap	Counter
	smSiaSystemProcessInblocks	Counter
	smSiaSystemProcessOutblocks	Counter
	smSiaSystemProcessMsgsnd	Counter
	smSiaSystemProcessMsgrcv	Counter
	smSiaSystemProcessNsignals	Counter
	smSiaSystemProcessNVcsw	Counter
	smSiaSystemProcessNIvcsw	Counter
	smSiaSystemProcessArguments	DisplayString
	smSiaSystemProcessSignal	INTEGER

SmSiaSystemUsersEntry
SEQUENCE
	smSiaSystemUsersName	DisplayString
	smSiaSystemUsersLine	DisplayString
	smSiaSystemUsersTime	DisplayString
	smSiaSystemUsersPID	INTEGER
	smSiaSystemUsersRemoteHost	DisplayString

SmSiaSystemUtilizationCPUEntry
SEQUENCE
	smSiaSystemUtilizationCPUIntervalName	DisplayString
	smSiaSystemUtilizationCPUIntervalStartTime	DisplayString
	smSiaSystemUtilizationCPUIntervalLength	TimeTicks
	smSiaSystemUtilizationCPUUser	INTEGER
	smSiaSystemUtilizationCPUSystem	INTEGER
	smSiaSystemUtilizationCPUIdle	INTEGER
	smSiaSystemUtilizationCPUWait	INTEGER
	smSiaSystemUtilizationCPUBusy	INTEGER
	smSiaSystemUtilizationCPUUserMinimum	INTEGER
	smSiaSystemUtilizationCPUSystemMinimum	INTEGER
	smSiaSystemUtilizationCPUIdleMinimum	INTEGER
	smSiaSystemUtilizationCPUWaitMinimum	INTEGER
	smSiaSystemUtilizationCPUBusyMinimum	INTEGER
	smSiaSystemUtilizationCPUUserMaximum	INTEGER
	smSiaSystemUtilizationCPUSystemMaximum	INTEGER
	smSiaSystemUtilizationCPUIdleMaximum	INTEGER
	smSiaSystemUtilizationCPUWaitMaximum	INTEGER
	smSiaSystemUtilizationCPUBusyMaximum	INTEGER
	smSiaSystemUtilizationCPUNumber	INTEGER

SmSiaSystemUtilizationKernelEntry
SEQUENCE
	smSiaSystemUtilizationKernelName	DisplayString
	smSiaSystemUtilizationKernelIntervalStartTime	DisplayString
	smSiaSystemUtilizationKernelIntervalLength	TimeTicks
	smSiaSystemUtilizationKernelContextSwitches	INTEGER
	smSiaSystemUtilizationKernelSystemCalls	INTEGER
	smSiaSystemUtilizationKernelSystemReads	INTEGER
	smSiaSystemUtilizationKernelSystemWrites	INTEGER
	smSiaSystemUtilizationKernelForks	INTEGER
	smSiaSystemUtilizationKernelExecs	INTEGER
	smSiaSystemUtilizationKernelRunQueue	INTEGER
	smSiaSystemUtilizationKernelSwapQueue	INTEGER
	smSiaSystemUtilizationKernelSemaphores	INTEGER
	smSiaSystemUtilizationKernelMessages	INTEGER
	smSiaSystemUtilizationKernelProcessOverflow	INTEGER
	smSiaSystemUtilizationKernelBytesRead	INTEGER
	smSiaSystemUtilizationKernelBytesWritten	INTEGER
	smSiaSystemUtilizationKernelRawTTYOut	INTEGER
	smSiaSystemUtilizationKernelContextSwitchesMinimum	INTEGER
	smSiaSystemUtilizationKernelSystemCallsMinimum	INTEGER
	smSiaSystemUtilizationKernelSystemReadsMinimum	INTEGER
	smSiaSystemUtilizationKernelSystemWritesMinimum	INTEGER
	smSiaSystemUtilizationKernelForksMinimum	INTEGER
	smSiaSystemUtilizationKernelExecsMinimum	INTEGER
	smSiaSystemUtilizationKernelRunQueueMinimum	INTEGER
	smSiaSystemUtilizationKernelSwapQueueMinimum	INTEGER
	smSiaSystemUtilizationKernelSemaphoresMinimum	INTEGER
	smSiaSystemUtilizationKernelMessagesMinimum	INTEGER
	smSiaSystemUtilizationKernelProcessOverflowMinimum	INTEGER
	smSiaSystemUtilizationKernelBytesReadMinimum	INTEGER
	smSiaSystemUtilizationKernelBytesWrittenMinimum	INTEGER
	smSiaSystemUtilizationKernelRawTTYOutMinimum	INTEGER
	smSiaSystemUtilizationKernelContextSwitchesMaximum	INTEGER
	smSiaSystemUtilizationKernelSystemCallsMaximum	INTEGER
	smSiaSystemUtilizationKernelSystemReadsMaximum	INTEGER
	smSiaSystemUtilizationKernelSystemWritesMaximum	INTEGER
	smSiaSystemUtilizationKernelForksMaximum	INTEGER
	smSiaSystemUtilizationKernelExecsMaximum	INTEGER
	smSiaSystemUtilizationKernelRunQueueMaximum	INTEGER
	smSiaSystemUtilizationKernelSwapQueueMaximum	INTEGER
	smSiaSystemUtilizationKernelSemaphoresMaximum	INTEGER
	smSiaSystemUtilizationKernelMessagesMaximum	INTEGER
	smSiaSystemUtilizationKernelProcessOverflowMaximum	INTEGER
	smSiaSystemUtilizationKernelBytesReadMaximum	INTEGER
	smSiaSystemUtilizationKernelBytesWrittenMaximum	INTEGER
	smSiaSystemUtilizationKernelRawTTYOutMaximum	INTEGER

SmSiaSystemUtilizationIostatEntry
SEQUENCE
	smSiaSystemUtilizationIostatName	DisplayString
	smSiaSystemUtilizationIostatIntervalStartTime	DisplayString
	smSiaSystemUtilizationIostatIntervalLength	TimeTicks
	smSiaSystemUtilizationIostatPercentTimeActive	INTEGER
	smSiaSystemUtilizationIostatKilobytesTransferRate	INTEGER
	smSiaSystemUtilizationIostatTransfers	INTEGER
	smSiaSystemUtilizationIostatKilobytesRead	INTEGER
	smSiaSystemUtilizationIostatKilobytesWritten	INTEGER
	smSiaSystemUtilizationIostatPercentTimeActiveMinimum	INTEGER
	smSiaSystemUtilizationIostatKilobytesTransferRateMinimum	INTEGER
	smSiaSystemUtilizationIostatTransfersMinimum	INTEGER
	smSiaSystemUtilizationIostatKilobytesReadMinimum	INTEGER
	smSiaSystemUtilizationIostatKilobytesWrittenMinimum	INTEGER
	smSiaSystemUtilizationIostatPercentTimeActiveMaximum	INTEGER
	smSiaSystemUtilizationIostatKilobytesTransferRateMaximum	INTEGER
	smSiaSystemUtilizationIostatTransfersMaximum	INTEGER
	smSiaSystemUtilizationIostatKilobytesReadMaximum	INTEGER
	smSiaSystemUtilizationIostatKilobytesWrittenMaximum	INTEGER

SmSiaCommandEntry
SEQUENCE
	smSiaCommandState	INTEGER
	smSiaCommandName	DisplayString
	smSiaCommandDescription	DisplayString
	smSiaCommandOwnerID	DisplayString
	smSiaCommandGetStringAndParameters	DisplayString
	smSiaCommandSetStringAndParameters	DisplayString
	smSiaCommandTimeOutValue	INTEGER
	smSiaCommandCountToLive	INTEGER
	smSiaCommandTimeToLive	INTEGER
	smSiaCommandOutputResultIndex	INTEGER
	smSiaCommandOutputRowIndex	INTEGER
	smSiaCommandOutputColumnIndex	INTEGER
	smSiaCommandDisplayStringResult	DisplayString
	smSiaCommandIntegerResult	INTEGER
	smSiaCommandCounterResult	Counter
	smSiaCommandGaugeResult	Gauge
	smSiaCommandExecutionReturnCode	INTEGER
	smSiaCommandStandardError	DisplayString

SmSiaAdministrationEntry
SEQUENCE
	smSiaAdministrationFieldState	INTEGER
	smSiaAdministrationFieldName	DisplayString
	smSiaAdministrationFieldOwner	DisplayString
	smSiaAdministrationFieldDescription	DisplayString
	smSiaAdministrationFieldValue	DisplayString

SmSiaFileMonitorEntry
SEQUENCE
	smSiaFileMonitorState	INTEGER
	smSiaFileMonitorName	DisplayString
	smSiaFileMonitorType	INTEGER
	smSiaFileMonitorTrapState	INTEGER
	smSiaFileMonitorCaseState	INTEGER
	smSiaFileMonitorDescription	DisplayString
	smSiaFileMonitorOwnerID	DisplayString
	smSiaFileMonitorFullPathName	DisplayString
	smSiaFileMonitorForString	DisplayString
	smSiaFileMonitorActivationState	INTEGER
	smSiaFileMonitorActivationTime	DisplayString
	smSiaFileMonitorActivationDayOfWeek	DisplayString
	smSiaFileMonitorDeactivationTime	DisplayString
	smSiaFileMonitorDeactivationDayOfWeek	DisplayString
	smSiaFileMonitorPollTime	DisplayString
	smSiaFileMonitorResetToStartOfFile	INTEGER
	smSiaFileMonitorCurrentLineCountOfFile	INTEGER
	smSiaFileMonitorFoundStringCount	INTEGER
	smSiaFileMonitorFoundStringAtLineNumber	INTEGER
	smSiaFileMonitorStringFound	DisplayString
	smSiaFileMonitorBytePositionWithinLine	INTEGER
	smSiaFileMonitorCompleteLineStringFound	DisplayString
	smSiaFileMonitorFoundStringBytePositionWithinFile	INTEGER
	smSiaFileMonitorTimeLastFound	DisplayString
	smSiaFileMonitorCommandToExecuteTypeMet	DisplayString
	smSiaFileMonitorCommandToExecuteBeforeMonitor	DisplayString
	smSiaFileMonitorMode	DisplayString
	smSiaFileMonitorUserID	DisplayString
	smSiaFileMonitorGroupID	DisplayString
	smSiaFileMonitorSize	INTEGER
	smSiaFileMonitorTimeLastDataModification	DisplayString
	smSiaFileMonitorTimeLastFileStatusChange	DisplayString
	smSiaFileMonitorReturnCode	INTEGER
	smSiaFileMonitorMessages	DisplayString

Defined Values

ibm		1.3.6.1.4.1.2
OBJECT IDENTIFIER

ibmProd		1.3.6.1.4.1.2.6
OBJECT IDENTIFIER

systemsMonitor6000		1.3.6.1.4.1.2.6.12
OBJECT IDENTIFIER

smProgramInformation		1.3.6.1.4.1.2.6.12.1
OBJECT IDENTIFIER

smSiaSystemInformation		1.3.6.1.4.1.2.6.12.2
OBJECT IDENTIFIER

smSiaCommand		1.3.6.1.4.1.2.6.12.4
OBJECT IDENTIFIER

smSiaAdministration		1.3.6.1.4.1.2.6.12.20
OBJECT IDENTIFIER

smSiaFileMonitor		1.3.6.1.4.1.2.6.12.21
OBJECT IDENTIFIER

smSiaProgramData		1.3.6.1.4.1.2.6.12.1.10
OBJECT IDENTIFIER

smSiaResourceUsage		1.3.6.1.4.1.2.6.12.1.11
OBJECT IDENTIFIER

smSiaProgramMessages		1.3.6.1.4.1.2.6.12.1.12
OBJECT IDENTIFIER

smSiaProgramDescription		1.3.6.1.4.1.2.6.12.1.10.1
OBJECT IDENTIFIER

smSiaProgramControl		1.3.6.1.4.1.2.6.12.1.10.2
OBJECT IDENTIFIER

smSiaProgramLog		1.3.6.1.4.1.2.6.12.1.10.3
OBJECT IDENTIFIER

smSiaProgramSetableTestObjects		1.3.6.1.4.1.2.6.12.1.10.5
OBJECT IDENTIFIER

smSiaProgramName		1.3.6.1.4.1.2.6.12.1.10.1.1
Official name of the Systems Information Agent program.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaProgramNumber		1.3.6.1.4.1.2.6.12.1.10.1.2
Program number for the Systems Information Agent program.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaProgramVersion		1.3.6.1.4.1.2.6.12.1.10.1.3
Version number of the Systems Information Agent program.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaProgramCompilationDate		1.3.6.1.4.1.2.6.12.1.10.1.4
Date and time when the current agent was compiled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaProgramUpTime		1.3.6.1.4.1.2.6.12.1.10.1.5
Time (in hundredths of a second) since the Systems Information Agent Program was last re-initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaProgramContact		1.3.6.1.4.1.2.6.12.1.10.1.6
Textual identification of the contact person for the Systems Information Agent program on this managed node and information on how to contact this person.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaProgramControlLocalConfigurationFile		1.3.6.1.4.1.2.6.12.1.10.2.1
Name of a local configuration file. The local configuration file is written when the smSiaProgramControlSaveConfiguration MIB variable is set to true(2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaProgramControlSavedFlags		1.3.6.1.4.1.2.6.12.1.10.2.2
Saved flags which will be used to start the agent. This field can be modified to be used with the smSiaProgramControlReInitializeMonitor function. The flags are saved in the file: /usr/etc/sysinfod.flags
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaProgramControlAgentAddress		1.3.6.1.4.1.2.6.12.1.10.2.3
Address of the box where SIA is running. This address is used while generating traps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

smSiaProgramControlReserved1		1.3.6.1.4.1.2.6.12.1.10.2.4
Reserved.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smSiaProgramControlPercentMultiplier		1.3.6.1.4.1.2.6.12.1.10.2.5
Multiplier used to multiply percentage variables. The default is 1; 0 is treated the same as the default.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smSiaProgramControlPollTime		1.3.6.1.4.1.2.6.12.1.10.2.6
Reserved
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smSiaProgramControlFlags		1.3.6.1.4.1.2.6.12.1.10.2.7
Reserved
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smSiaProgramControlRetryCount		1.3.6.1.4.1.2.6.12.1.10.2.8
Reserved. Default number of retries for actions that can be retried.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smSiaProgramControlTimeout		1.3.6.1.4.1.2.6.12.1.10.2.9
Reserved. Default number of timeout for actions that can timeout.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TimeTicks

smSiaProgramControlCurrentFlags		1.3.6.1.4.1.2.6.12.1.10.2.10
Current flags which were used to start or re-initialize the agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaProgramControlReinitFlags		1.3.6.1.4.1.2.6.12.1.10.2.11
Re-intialize flags which will be used to start the agent. This field is set to smSiaProgramControlCurrentFlags at program start or re-initialization. This field can be modified to be used with the smSiaProgramControlReInitializeMonitor function.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaProgramControlReInitializeMonitor		1.3.6.1.4.1.2.6.12.1.10.2.12
Allows the re-initializaton of the Systems Information Agent. Setting to trueReinit(2) uses the flags in smSiaProgramControlReinitFlags as the start-up flags. Setting to trueSaved(3) uses the flags in smSiaProgramControlSavedFlags as the start-up flags. The value of this variable returns to false once the re-start has occurred.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	false(1), trueReinit(2), trueSaved(3)

smSiaProgramControlSaveConfiguration		1.3.6.1.4.1.2.6.12.1.10.2.13
Setting this variable to true(2) results in the current Systems Information Agent configuration being saved to the file specified by the value of the smSiaProgramControl LocalConfigurationFile variable. The value of this variable returns to false once the configuration is saved.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	false(1), true(2)

smSiaProgramLogFileName		1.3.6.1.4.1.2.6.12.1.10.3.1
File name for logging information in System Information Agent. The type of information being logged depends on the trace mask (ie. smSiaProgramLogMask).
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaProgramLogFileSize		1.3.6.1.4.1.2.6.12.1.10.3.2
Current size of the log file in bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaProgramLogMaxFileSize		1.3.6.1.4.1.2.6.12.1.10.3.3
Maximum size of the log file in kilobytes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smSiaProgramLogNumFiles		1.3.6.1.4.1.2.6.12.1.10.3.4
Maximum number of log files to keep. When the data log file is full, it is rolled over to 1. Files are rolled up until the number of files specified by this field exists (ie. 1 becomes 2, etc.).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smSiaProgramLogFileBehavior		1.3.6.1.4.1.2.6.12.1.10.3.5
This field determines what is done when the maximum file size is exceeded and the number of log files specified already exists. If wrap is specified, then the oldest log file is removed, all other files are rolled up, and logging continues into a new file. If nowrap is specified, no more data will be logged until either the log file name is changed or the existing files are renamed (or removed). Flushing refers to whether or not each log entry is immediately written to the log file or whether the log data is written out in large chunks containing multiple log entries. Flushing allows the log file to always contain the latest log entries. However, CPU time can be saved if flushing is not activated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wrapFlush(1), wrapNoflush(2), nowrapFlush(3), nowrapNoflush(4)

smSiaProgramLogMask		1.3.6.1.4.1.2.6.12.1.10.3.6
The log mask field is used to indicate the type of information that is being logged. The log mask may contain the following literals: none logs nothing inform logs informational messages warning logs warning messages error logs error messages base logs System Information Agent base information command logs command table information smux logs SMUX interface traffic call logs all internal functions called all logs all information
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaProgramControlSetableInteger		1.3.6.1.4.1.2.6.12.1.10.5.1
A settable integer with no function.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smSiaProgramControlSetableCounter		1.3.6.1.4.1.2.6.12.1.10.5.2
A settable counter with no function.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Counter

smSiaProgramControlSetableGauge		1.3.6.1.4.1.2.6.12.1.10.5.3
A settable gauge with no function.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Gauge

smSiaProgramControlSetableIpAddress		1.3.6.1.4.1.2.6.12.1.10.5.4
A settable IP address with no function.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

smSiaProgramControlSetableTimeTicks		1.3.6.1.4.1.2.6.12.1.10.5.5
A settable TimeTicks with no function.
Status: mandatory	Access: read-write
OBJECT-TYPE
	TimeTicks

smSiaProgramControlSetableOctetString		1.3.6.1.4.1.2.6.12.1.10.5.6
A settable DisplayString with no function.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaResourceUsageTable		1.3.6.1.4.1.2.6.12.1.11.1
Systems Information Agent resource utilization table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaResourceUsageEntry

smSiaResourceUsageEntry		1.3.6.1.4.1.2.6.12.1.11.1.1
Each entry contains a different resource summary.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaResourceUsageEntry

smSiaResourceUsageName		1.3.6.1.4.1.2.6.12.1.11.1.1.1
Self, child, and total.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaResourceUsageUserTime		1.3.6.1.4.1.2.6.12.1.11.1.1.2
Amount of CPU time in user mode since start-up.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaResourceUsageSystemTime		1.3.6.1.4.1.2.6.12.1.11.1.1.3
Amount of CPU time in system mode since start-up.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaResourceUsageTotalTime		1.3.6.1.4.1.2.6.12.1.11.1.1.4
Total CPU time for process since start-up.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaResourceUsageMaxrss		1.3.6.1.4.1.2.6.12.1.11.1.1.5
Maximum resident set size. Not supported on Sun Solaris 2.x.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageIxrss		1.3.6.1.4.1.2.6.12.1.11.1.1.6
Integral size (kilobyte-seconds). Not supported on Sun Solaris 2.x.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageIdrss		1.3.6.1.4.1.2.6.12.1.11.1.1.7
Unshared resident set size (kilobyte-seconds). Not supported on Sun Solaris 2.x.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageIsrss		1.3.6.1.4.1.2.6.12.1.11.1.1.8
Unshared stack set size (kilobyte-seconds). Not supported on Sun Solaris 2.x.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageMinflt		1.3.6.1.4.1.2.6.12.1.11.1.1.9
Page faults serviced without I/O activity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageMajflt		1.3.6.1.4.1.2.6.12.1.11.1.1.10
Page faults serviced with I/O activity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageNSwap		1.3.6.1.4.1.2.6.12.1.11.1.1.11
Number of times a process swapped.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageInBlock		1.3.6.1.4.1.2.6.12.1.11.1.1.12
Number of times a file system performed input.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageOutBlock		1.3.6.1.4.1.2.6.12.1.11.1.1.13
Number of times a file system performed output.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageMsgsnd		1.3.6.1.4.1.2.6.12.1.11.1.1.14
Number of IPC messages sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageMsgrcv		1.3.6.1.4.1.2.6.12.1.11.1.1.15
Number of IPC messages received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageNSignals		1.3.6.1.4.1.2.6.12.1.11.1.1.16
Number of signals received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageVcsw		1.3.6.1.4.1.2.6.12.1.11.1.1.17
Number of voluntary context switches.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaResourceUsageIcsw		1.3.6.1.4.1.2.6.12.1.11.1.1.18
Number of involuntary context switches.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaProgramMessagesTable		1.3.6.1.4.1.2.6.12.1.12.1
Systems Information Agent information and error messages.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaProgramMessagesEntry

smSiaProgramMessagesEntry		1.3.6.1.4.1.2.6.12.1.12.1.1
Each entry contains a different message summary.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaProgramMessagesEntry

smSiaProgramMessagesRowNumber		1.3.6.1.4.1.2.6.12.1.12.1.1.1
Table index - no real meaning.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaProgramMessagesTime		1.3.6.1.4.1.2.6.12.1.12.1.1.2
Time at which the message was generated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaProgramMessagesText		1.3.6.1.4.1.2.6.12.1.12.1.1.3
Text of the message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaProgramMessagesTimeStamp		1.3.6.1.4.1.2.6.12.1.12.1.1.4
Time (in seconds) at which message was generated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDescription		1.3.6.1.4.1.2.6.12.2.1
OBJECT IDENTIFIER

smSiaSystemConfiguration		1.3.6.1.4.1.2.6.12.2.2
OBJECT IDENTIFIER

smSiaSystemDevice		1.3.6.1.4.1.2.6.12.2.3
OBJECT IDENTIFIER

smSiaSystemPagingInformation		1.3.6.1.4.1.2.6.12.2.4
OBJECT IDENTIFIER

smSiaSystemFileSystem		1.3.6.1.4.1.2.6.12.2.5
OBJECT IDENTIFIER

smSiaSystemSubSystems		1.3.6.1.4.1.2.6.12.2.6
OBJECT IDENTIFIER

smSiaSystemProcess		1.3.6.1.4.1.2.6.12.2.7
OBJECT IDENTIFIER

smSiaSystemUsers		1.3.6.1.4.1.2.6.12.2.8
OBJECT IDENTIFIER

smSiaSystemUtilization		1.3.6.1.4.1.2.6.12.2.9
OBJECT IDENTIFIER

smSiaSystemMiscellaneous		1.3.6.1.4.1.2.6.12.2.11
OBJECT IDENTIFIER

smSiaSystemNodeName		1.3.6.1.4.1.2.6.12.2.1.1
Node name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemSysName		1.3.6.1.4.1.2.6.12.2.1.2
System name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemVersion		1.3.6.1.4.1.2.6.12.2.1.3
Operating System version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemRelease		1.3.6.1.4.1.2.6.12.2.1.4
Operating System release.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemMachine		1.3.6.1.4.1.2.6.12.2.1.5
Hardware type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemTime		1.3.6.1.4.1.2.6.12.2.1.6
Current system time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemFreePagingSpace		1.3.6.1.4.1.2.6.12.2.4.1
Free paging space in the system, in megabytes. It can be useful to set a threshold on this variable to indicate when it drops below a certain number of Mbs, (for instance, for AIX, the threshold is 2 Mb) because when there is less than adequate free paging space, the kernel sends a SIGDANGER to all processes on the system, and if the free paging space continues to drop, the kernel will begin killing large processes until it can get back 512 pages (enough to prevent a system crash).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemFreePagingSpaceUntilKill		1.3.6.1.4.1.2.6.12.2.4.2
Free paging space until kill threshold, in megabytes. On HP-UX and Sun Solaris, this variable is the same as smSiaSystemFreePagingSpace. On Digital UNIX, this variable is the low water mark for paging space (20 Mb).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemKillThresholdToFreePagingSpacePercent		1.3.6.1.4.1.2.6.12.2.4.3
Ratio of kill threshold to free paging space expressed as a percentage. This value remains zero until the kill threshold becomes >= 1% of the free paging space. On HP-UX and Sun Solaris, this variable is computed as the percentage of paging space used. On Digital UNIX, this variable is the difference between free paging space and the FreePagingSpaceUntilKill expressed as a percent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingSpace		1.3.6.1.4.1.2.6.12.2.4.4
OBJECT IDENTIFIER

smSiaSystemPagingStatistics		1.3.6.1.4.1.2.6.12.2.4.5
OBJECT IDENTIFIER

smSiaSystemPagingSpaceCount		1.3.6.1.4.1.2.6.12.2.4.4.1
The number of paging spaces.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemPagingSpaceTable		1.3.6.1.4.1.2.6.12.2.4.4.2
Paging space table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemPagingSpaceEntry

smSiaSystemPagingSpaceEntry		1.3.6.1.4.1.2.6.12.2.4.4.2.1
Each entry contains objects for a particular paging space.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemPagingSpaceEntry

smSiaSystemPagingSpaceName		1.3.6.1.4.1.2.6.12.2.4.4.2.1.1
Paging space name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemPagingSpacePhysicalVolume		1.3.6.1.4.1.2.6.12.2.4.4.2.1.2
Physical volume on which paging space resides. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemPagingSpaceVolumeGroup		1.3.6.1.4.1.2.6.12.2.4.4.2.1.3
Volume group of paging space. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemPagingSpaceSize		1.3.6.1.4.1.2.6.12.2.4.4.2.1.4
Size in megabytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingSpacePercentUsed		1.3.6.1.4.1.2.6.12.2.4.4.2.1.5
Percent used. This value can be helpful in maintaining acceptable system performance. When the percent of paging space used goes above approximately 80 percent, the system performance can be affected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemPagingSpaceActive		1.3.6.1.4.1.2.6.12.2.4.4.2.1.6
Active indicator --- Yes or No Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemPagingSpaceAuto		1.3.6.1.4.1.2.6.12.2.4.4.2.1.7
Auto indicator --- Yes or No Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemPagingSpaceType		1.3.6.1.4.1.2.6.12.2.4.4.2.1.8
Paging space type. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemPagingStatisticsPollingInterval		1.3.6.1.4.1.2.6.12.2.4.5.1
Polling interval for paging statistics data. Currently reserved.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsTable		1.3.6.1.4.1.2.6.12.2.4.5.2
Input/Output statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemPagingStatisticsEntry

smSiaSystemPagingStatisticsEntry		1.3.6.1.4.1.2.6.12.2.4.5.2.1
Each instance contains paging statistics over a different interval. - same information as vmstat
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemPagingStatisticsEntry

smSiaSystemPagingStatisticsName		1.3.6.1.4.1.2.6.12.2.4.5.2.1.1
Description of interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemPagingStatisticsIntervalStartTime		1.3.6.1.4.1.2.6.12.2.4.5.2.1.2
Start time of interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemPagingStatisticsIntervalLength		1.3.6.1.4.1.2.6.12.2.4.5.2.1.3
Length of interval during which paging statistics are computed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaSystemPagingStatisticsPageFaults		1.3.6.1.4.1.2.6.12.2.4.5.2.1.4
Total number of page faults over the interval. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageReclaims		1.3.6.1.4.1.2.6.12.2.4.5.2.1.5
Total number of page reclaims over the interval. On Digital UNIX, this variable is the number of pages freed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPagesPagedIn		1.3.6.1.4.1.2.6.12.2.4.5.2.1.6
Total number of Pages Paged In over the interval
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPagesPagedOut		1.3.6.1.4.1.2.6.12.2.4.5.2.1.7
Total number of Pages Paged Out over the interval
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageInsFromPagingSpace		1.3.6.1.4.1.2.6.12.2.4.5.2.1.8
Total number of Page Ins From Paging Space. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageOutsFromPagingSpace		1.3.6.1.4.1.2.6.12.2.4.5.2.1.9
Total number of Page Outs From Paging Space Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsStartIOs		1.3.6.1.4.1.2.6.12.2.4.5.2.1.10
Total number of IO Starts Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsDoneIOs		1.3.6.1.4.1.2.6.12.2.4.5.2.1.11
Total number of IOs Done Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageScans		1.3.6.1.4.1.2.6.12.2.4.5.2.1.12
Total number of page scans
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsScanClockCycles		1.3.6.1.4.1.2.6.12.2.4.5.2.1.13
Total page scan clock cycles. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageSteals		1.3.6.1.4.1.2.6.12.2.4.5.2.1.14
Total number of page steals Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsFreeFrameWaits		1.3.6.1.4.1.2.6.12.2.4.5.2.1.15
Total number of free frame waits. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsExtendXPTWaits		1.3.6.1.4.1.2.6.12.2.4.5.2.1.16
Total number of extend XPT waits. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPendingIOWaits		1.3.6.1.4.1.2.6.12.2.4.5.2.1.17
Total number of Pending I/O waits Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageFaultsMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.18
Minimum page faults. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageReclaimsMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.19
Minimum page reclaims
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPagesPagedInMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.20
Minimum pages paged in
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPagesPagedOutMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.21
Minimum pages paged out
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageInsFromPagingSpaceMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.22
Minimum Page Ins From Paging Space. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageOutsFromPagingSpaceMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.23
Minimum Page Outs From Paging Space. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsStartIOsMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.24
Minimum IO Starts Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsDoneIOsMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.25
Minimum IOs Done Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageScansMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.26
Minimum number of page scans
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsScanClockCyclesMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.27
Minimum page scan clock cycles Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageStealsMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.28
Minimum page steals Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsFreeFrameWaitsMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.29
Minimum free frame waits Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsExtendXPTWaitsMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.30
Minimum Extend XPT waits. Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPendingIOWaitsMinimum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.31
Minimum Pending I/O waits Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageFaultsMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.32
Maximum page faults Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageReclaimsMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.33
Maximum page reclaims
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPagesPagedInMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.34
Maximum Pages Paged In
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPagesPagedOutMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.35
Maximum Pages Paged Out
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageInsFromPagingSpaceMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.36
Maximum Page Ins From Paging Space Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageOutsFromPagingSpaceMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.37
Maximum Page Outs From Paging Space Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsStartIOsMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.38
Maximum IO Starts Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsDoneIOsMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.39
Maximum IOs Done Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageScansMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.40
Maximum number of page scans
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsScanClockCyclesMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.41
Maximum page scan clock cycles Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPageStealsMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.42
Maximum page steals Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsFreeFrameWaitsMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.43
Maximum free frame waits Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsExtendXPTWaitsMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.44
Maximum Extend XPT waits. Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPagingStatisticsPendingIOWaitsMaximum		1.3.6.1.4.1.2.6.12.2.4.5.2.1.45
Maximum Pending I/O waits Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemBufferPoolMark		1.3.6.1.4.1.2.6.12.2.2.1
Buffer Pool High water mark On Sun Solaris, the mbuf high water mark includes only the normal mbuf and not the cluster mbuf. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemMaxMbufs		1.3.6.1.4.1.2.6.12.2.2.2
Max mbufs high-water mark. Not supported on Sun Solaris 2.x or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemMaxUserProcesses		1.3.6.1.4.1.2.6.12.2.2.3
Maximum number of processes per user.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemMaxSystemProcesses		1.3.6.1.4.1.2.6.12.2.2.4
Maximum number of processes on the system. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemRecordLockTableSize		1.3.6.1.4.1.2.6.12.2.2.5
Number of entries in record lock table. Not supported on Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemOpenFileTableSize		1.3.6.1.4.1.2.6.12.2.2.6
Maximum number of entries in open file table. Not supported on Sun Solaris 2.x.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemCBlockArraySize		1.3.6.1.4.1.2.6.12.2.2.7
Maximum number of cblocks in cblock array. For Sun Solaris 2.x, it is the number of clists allocated. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDiskIOHistory		1.3.6.1.4.1.2.6.12.2.2.8
Disk I/O History enabled. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

smSiaSystemAutomaticBootAfterHalt		1.3.6.1.4.1.2.6.12.2.2.9
Automatic boot after halt. Not supported on HP-UX or Digital UNIX. On Sun Solaris, this variable reflects the value of the openprom option variable .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

smSiaSystemMemScrub		1.3.6.1.4.1.2.6.12.2.2.10
Memory scrubbing enabled. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

smSiaSystemLeastPriv		1.3.6.1.4.1.2.6.12.2.2.11
Least privilege enablement. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemMaxPout		1.3.6.1.4.1.2.6.12.2.2.12
Number of file pageouts at which waiting occurs. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemMinPout		1.3.6.1.4.1.2.6.12.2.2.13
Number of file pageouts at which ready occurs. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPageSize		1.3.6.1.4.1.2.6.12.2.2.14
System page size (from getpagesize())
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessMaxOpenFiles		1.3.6.1.4.1.2.6.12.2.2.15
Maximum open files per process.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessMaxOpenStreams		1.3.6.1.4.1.2.6.12.2.2.16
Maximum open streams per process On Sun Solaris, there is no limit on the number of streams in the system or per processor. The maximum open streams per process is limited by the number of open files per process. That is, this variable always has the same value as smSiaSystemProcessMaxOpenFiles.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessDescriptorTableSize		1.3.6.1.4.1.2.6.12.2.2.17
Descriptor table size for System Information Agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemPhysicalMemorySize		1.3.6.1.4.1.2.6.12.2.2.18
Amount of usable physical memory in Mbytes
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceList		1.3.6.1.4.1.2.6.12.2.3.1
OBJECT IDENTIFIER

smSiaSystemDeviceTokenRing		1.3.6.1.4.1.2.6.12.2.3.2
OBJECT IDENTIFIER

smSiaSystemDeviceEthernet		1.3.6.1.4.1.2.6.12.2.3.3
OBJECT IDENTIFIER

smSiaSystemDeviceX25		1.3.6.1.4.1.2.6.12.2.3.4
OBJECT IDENTIFIER

smSiaSystemDeviceListInstalled		1.3.6.1.4.1.2.6.12.2.3.1.1
The number of devices installed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceListTable		1.3.6.1.4.1.2.6.12.2.3.1.2
Device list table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemDeviceListEntry

smSiaSystemDeviceListEntry		1.3.6.1.4.1.2.6.12.2.3.1.2.1
Each entry contains objects for a particular device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemDeviceListEntry

smSiaSystemDeviceListName		1.3.6.1.4.1.2.6.12.2.3.1.2.1.1
Names of devices installed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceListDescription		1.3.6.1.4.1.2.6.12.2.3.1.2.1.2
Location of device. Shows status, location and description
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceListLocation		1.3.6.1.4.1.2.6.12.2.3.1.2.1.3
Location of device. Not supported on Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceListVPD		1.3.6.1.4.1.2.6.12.2.3.1.2.1.4
Vital Product Data. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceListAttributes		1.3.6.1.4.1.2.6.12.2.3.1.2.1.5
Device Attributes. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceListDiagnostics		1.3.6.1.4.1.2.6.12.2.3.1.2.1.6
Results of diagnostic tests. Currently reserved
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceTokenRingInstalled		1.3.6.1.4.1.2.6.12.2.3.2.1
The number of devices installed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingTable		1.3.6.1.4.1.2.6.12.2.3.2.2
Adapter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemDeviceTokenRingEntry

smSiaSystemDeviceTokenRingEntry		1.3.6.1.4.1.2.6.12.2.3.2.2.1
Each entry contains objects for a particular device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemDeviceTokenRingEntry

smSiaSystemDeviceTokenRingNumber		1.3.6.1.4.1.2.6.12.2.3.2.2.1.1
Token ring number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingHardwareAddress		1.3.6.1.4.1.2.6.12.2.3.2.2.1.2
Burned-in MAC Address. On Sun Solaris 2.x, the token ring card does not have a built-in address. This variable is the same as the smSiaSystemDeviceTokenRingCurrentAddress. On AIX4, this variable is the same as the smSiaSystemDeviceTokenRingCurrentAddress for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceTokenRingCurrentAddress		1.3.6.1.4.1.2.6.12.2.3.2.2.1.3
Current MAC Address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceTokenRingReceiveDataOffset		1.3.6.1.4.1.2.6.12.2.3.2.2.1.4
Receive data transfer offset. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingBroadwrap		1.3.6.1.4.1.2.6.12.2.3.2.2.1.5
Supports broadcast wrap of data. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

smSiaSystemDeviceTokenRingTxByteMcnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.6
Most significant bits of successfully transmitted byte count. Not supported on HP-UX or Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingTxByteLcnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.7
Least significant bits of successfully transmitted byte count. Not supported on HP-UX or Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingRxByteMcnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.8
Most significant bits of successfully received byte count. Not supported on HP-UX or Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingRxByteLcnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.9
Least significant bits of successfully received byte count. Not supported on HP-UX or Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingTxFrameMcnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.10
Most significant bits of successfully transmitted byte count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingTxFrameLcnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.11
Least significant bits of successfully transmitted byte count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingRxFrameMcnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.12
Most significant bits of successfully received byte count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingRxFrameLcnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.13
Least significant bits of successfully received byte count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingTxErrCnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.14
Frame transmit error count Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingRxErrCnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.15
Frame receive error count Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingNidTblHigh		1.3.6.1.4.1.2.6.12.2.3.2.2.1.16
Maximum netids in use. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingTxQueHigh		1.3.6.1.4.1.2.6.12.2.3.2.2.1.17
Maximum transmits ever queued for adapter. On an adapter, buffer queue size is 30 by default. It can be useful to set a threshold on this variable to watch for the value to go over 20, indicating a need to increase buffer queue size to prevent an overflow. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemDeviceTokenRingRxQueHigh		1.3.6.1.4.1.2.6.12.2.3.2.2.1.18
Maximum received ever queued for any open. On an adapter, buffer queue size is 30 by dfault. It can be useful to set a threshold on this variable to watch for the value to go over 20, indicating a need to increase buffer queue size to prevent an overflow. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemDeviceTokenRingStaQueHigh		1.3.6.1.4.1.2.6.12.2.3.2.2.1.19
Maximum status blocks queued for any open. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemDeviceTokenRingIntrLost		1.3.6.1.4.1.2.6.12.2.3.2.2.1.20
Interrupts lost. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingWdtLost		1.3.6.1.4.1.2.6.12.2.3.2.2.1.21
Wdt Interrupts lost. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingTimoLost		1.3.6.1.4.1.2.6.12.2.3.2.2.1.22
Timeout Interrupts lost. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingStaQueOverflow		1.3.6.1.4.1.2.6.12.2.3.2.2.1.23
Status lost due to queue overflow. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingRxQueOverflow		1.3.6.1.4.1.2.6.12.2.3.2.2.1.24
Packet lost due to queue overflow. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingRxQueNoMbuf		1.3.6.1.4.1.2.6.12.2.3.2.2.1.25
Packet lost due to no mbufs. If this variable's value is not 0, you should extend mbuf as soon as possible. All data that goes through the adapter is copied from adapter to mbuf. Thus, if no mbuf is available to receive data, serious errors can occur. Be conservative when increasing mbuf size, because this takes real machine memory away from other applications. Not supported on HP-UX or Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingRxQueNoMbufExt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.26
Packet lost due to no mbuf extensions. If this variable's value is not 0, you should extend mbuf as soon as possible. All data that goes through the adapter is copied from adapter to mbuf. Thus, if no mbuf extension is available to receive data, serious errors can occur. Be conservative when increasing mbuf size, because this takes real machine memory away from other applications. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingTxIntrCnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.27
Transmit interrupt count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingRxIntrCnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.28
Receive interrupt count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingPktRejCnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.29
Packets rejected no NETID. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingPktAccCnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.30
Packets accepted - valid NETID. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingPktTxCnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.31
Packet transmit counter. Not supported on HP-UX or Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingOvfloPktCnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.32
Overflow packets received. Not supported on HP-UX or Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingPktTxErrCnt		1.3.6.1.4.1.2.6.12.2.3.2.2.1.33
Packet transmission errors detected by adapter. Not supported on HP-UX or Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceTokenRingSpeed		1.3.6.1.4.1.2.6.12.2.3.2.2.1.34
Ring speed, megabits/second. Not supported on HP-UX. On Sun Solaris, the speed of the Sun token ring card is controlled by jumpers on the card. The setting is not available from software. It defaults to return the speed of 16M.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingVPD		1.3.6.1.4.1.2.6.12.2.3.2.2.1.35
Vital Product Data from adapter. Not supported on HP-UX or Digital UNIX. On Sun Solaris, this variable always shows the he name of the device, for example, tr0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceTokenRingAdapPhysAddr		1.3.6.1.4.1.2.6.12.2.3.2.2.1.36
Adapter Physical Address. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceTokenRingUpstreamNodeAddr		1.3.6.1.4.1.2.6.12.2.3.2.2.1.37
Upstream node address. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceTokenRingUpstreamPhysAddr		1.3.6.1.4.1.2.6.12.2.3.2.2.1.38
Upstream Physical Address. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceTokenRingLastPollAddr		1.3.6.1.4.1.2.6.12.2.3.2.2.1.39
Last Poll address. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceTokenRingAuthorEnv		1.3.6.1.4.1.2.6.12.2.3.2.2.1.40
Authorized environment. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingTxAccessPriority		1.3.6.1.4.1.2.6.12.2.3.2.2.1.41
Transmit priority. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingSrcClassAuthor		1.3.6.1.4.1.2.6.12.2.3.2.2.1.42
Source class authorization. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingLastAttenCode		1.3.6.1.4.1.2.6.12.2.3.2.2.1.43
Last attention code. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingLastSrcAddr		1.3.6.1.4.1.2.6.12.2.3.2.2.1.44
Last source address. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceTokenRingLastBeaconType		1.3.6.1.4.1.2.6.12.2.3.2.2.1.45
Last beacon type. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingLastMajorVector		1.3.6.1.4.1.2.6.12.2.3.2.2.1.46
Last major vector. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingRingStatus		1.3.6.1.4.1.2.6.12.2.3.2.2.1.47
Ring status. Not supported on Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingSoftErrorTimerVal		1.3.6.1.4.1.2.6.12.2.3.2.2.1.48
Soft Error timer value. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingFrontEndTimerVal		1.3.6.1.4.1.2.6.12.2.3.2.2.1.49
Front end timer value. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingMonitorErrorCode		1.3.6.1.4.1.2.6.12.2.3.2.2.1.50
Monitor error code. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingBeaconTxType		1.3.6.1.4.1.2.6.12.2.3.2.2.1.51
Beacon transmit type. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingBeaconRxType		1.3.6.1.4.1.2.6.12.2.3.2.2.1.52
Beacon Receive type. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingFrameCorrSave		1.3.6.1.4.1.2.6.12.2.3.2.2.1.53
Frame Correlator save. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceTokenRingBeaconStationNAUN		1.3.6.1.4.1.2.6.12.2.3.2.2.1.54
Beaconing station NAUN. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceTokenRingBeaconStationPhysAddr		1.3.6.1.4.1.2.6.12.2.3.2.2.1.55
Beaconing station physical address. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceTokenRingClear		1.3.6.1.4.1.2.6.12.2.3.2.2.1.56
Set to clear clearable statistics Not supported on AIX and Digital UNIX.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), clear(2)

smSiaSystemDeviceEthernetInstalled		1.3.6.1.4.1.2.6.12.2.3.3.1
The number of devices installed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceEthernetTable		1.3.6.1.4.1.2.6.12.2.3.3.2
Adapter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemDeviceEthernetEntry

smSiaSystemDeviceEthernetEntry		1.3.6.1.4.1.2.6.12.2.3.3.2.1
Each entry contains objects for a particular device
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemDeviceEthernetEntry

smSiaSystemDeviceEthernetNumber		1.3.6.1.4.1.2.6.12.2.3.3.2.1.1
Adapter number. On Sun Solaris, there can be more than one kind of Ethernet interface on a system; both ie and le can be on the same system. The Ethernet number does not reflect the device unit number of the interface device; it is just a row index on the MIB table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceEthernetHardwareAddress		1.3.6.1.4.1.2.6.12.2.3.3.2.1.2
Burned-in MAC Address. On Sun Solaris 2.x, the Ethernet interface does not have its own built-in hardware address; instead, all network interfaces use the MAC address in the idprom on the motherboard. This variable is the same as smSiaSystemDeviceEthernetCurrentAddress. For AIX4 devices supporting CDLI model, this variable is the same as the smSiaSystemDeviceEthernetCurrentAddress.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceEthernetCurrentAddress		1.3.6.1.4.1.2.6.12.2.3.3.2.1.3
Current MAC Address Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceEthernetReceiveDataOffset		1.3.6.1.4.1.2.6.12.2.3.3.2.1.4
Receive Data transfer Offset Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceEthernetBroadwrap		1.3.6.1.4.1.2.6.12.2.3.3.2.1.5
Supports broadcast wrap of data. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

smSiaSystemDeviceEthernetTxByteMcnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.6
Most significant bits of successfully transmitted byte count. Not supported on HP-UX or Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetTxByteLcnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.7
Least significant bits of successfully transmitted byte count. Not supported on HP-UX or Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetRxByteMcnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.8
Most significant bits of successfully received byte count. Not supported on HP-UX or Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetRxByteLcnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.9
Least significant bits of successfully received byte count. Not supported on HP-UX or Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetTxFrameMcnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.10
Most significant bits of successfully transmitted byte count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetTxFrameLcnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.11
Least significant bits of successfully transmitted byte count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetRxFrameMcnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.12
Most significant bits of successfully received byte count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetRxFrameLcnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.13
Least significant bits of successfully received byte count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetTxErrCnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.14
Frame transmit error count Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetRxErrCnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.15
Frame receive error count Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetNidTblHigh		1.3.6.1.4.1.2.6.12.2.3.3.2.1.16
Maximum netids in use Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceEthernetTxQueHigh		1.3.6.1.4.1.2.6.12.2.3.3.2.1.17
Maximum transmits ever queued for adapter Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemDeviceEthernetRxQueHigh		1.3.6.1.4.1.2.6.12.2.3.3.2.1.18
Maximum received ever queued for any open Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemDeviceEthernetStaQueHigh		1.3.6.1.4.1.2.6.12.2.3.3.2.1.19
Maximum status blocks queued for any open Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemDeviceEthernetIntrLost		1.3.6.1.4.1.2.6.12.2.3.3.2.1.20
Interrupts lost Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetWdtLost		1.3.6.1.4.1.2.6.12.2.3.3.2.1.21
Wdt Interrupts lost Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetTimoLost		1.3.6.1.4.1.2.6.12.2.3.3.2.1.22
Timeout Interrupts lost Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetStaQueOverflow		1.3.6.1.4.1.2.6.12.2.3.3.2.1.23
Status lost due to queue overflow Supported on Sun Solaris 2.4 only. Not supported on HP-UX or Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetRxQueOverflow		1.3.6.1.4.1.2.6.12.2.3.3.2.1.24
Packet lost due to queue overflow Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetRxQueNoMbuf		1.3.6.1.4.1.2.6.12.2.3.3.2.1.25
Packet lost due to no mbufs Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetRxQueNoMbufExt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.26
Packet lost due to no mbuf extensions Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetTxIntrCnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.27
Transmit interrupt count Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetRxIntrCnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.28
Receive interrupt count Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetCRCErr		1.3.6.1.4.1.2.6.12.2.3.3.2.1.29
CRC Errors Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetAlignErr		1.3.6.1.4.1.2.6.12.2.3.3.2.1.30
Alignment Errors. On Sun Solaris, this variable is supported on interface ie, not on interface le. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetOverrun		1.3.6.1.4.1.2.6.12.2.3.3.2.1.31
Overrun Errors. On Sun Solaris 2.x, this variable is supported on interface ie, not on interface le. Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetTooShort		1.3.6.1.4.1.2.6.12.2.3.3.2.1.32
Too short Errors Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetTooLong		1.3.6.1.4.1.2.6.12.2.3.3.2.1.33
Too long Errors. Not supported on Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetNoResources		1.3.6.1.4.1.2.6.12.2.3.3.2.1.34
Out of resource errors. Not supported on Sun Solaris 2.x or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetPktDiscard		1.3.6.1.4.1.2.6.12.2.3.3.2.1.35
Packets discarded. Not supported on Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetMaxCollision		1.3.6.1.4.1.2.6.12.2.3.3.2.1.36
Maximum collisions
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetLateCollision		1.3.6.1.4.1.2.6.12.2.3.3.2.1.37
Collisions after slot time elapsed. On Sun Solaris, this variable is supported on interface le, not on interface ie. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetCarrierLost		1.3.6.1.4.1.2.6.12.2.3.3.2.1.38
Carrier lost errors
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetUnderrun		1.3.6.1.4.1.2.6.12.2.3.3.2.1.39
Underrun errors. On Sun Solaris 2.x, this variable is supported on interface ie, not on interface le. Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetCTSLost		1.3.6.1.4.1.2.6.12.2.3.3.2.1.40
Clear to send lost errors. Not supported on HP-UX, Sun Solaris 2.x or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetTxTimeouts		1.3.6.1.4.1.2.6.12.2.3.3.2.1.41
Transmit Timeouts Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetParErrCnt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.42
Parity errors Not supported on HP-UX, Sun Solaris or Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetDiagOverflow		1.3.6.1.4.1.2.6.12.2.3.3.2.1.43
Diagnostic overflow. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetExecOverflow		1.3.6.1.4.1.2.6.12.2.3.3.2.1.44
Execute queue overflows. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetExecCmdErrors		1.3.6.1.4.1.2.6.12.2.3.3.2.1.45
Execute command errors. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetHostRecEol		1.3.6.1.4.1.2.6.12.2.3.3.2.1.46
Host received end of list. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetAdptRecEol		1.3.6.1.4.1.2.6.12.2.3.3.2.1.47
Adapter received end of list. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetHostRecPkt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.48
Packets host actually received from adapter. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetAdptRecPkt		1.3.6.1.4.1.2.6.12.2.3.3.2.1.49
Packets to be delivered to host. Not supported on HP-UX and Sun Solaris. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetStartRxCmd		1.3.6.1.4.1.2.6.12.2.3.3.2.1.50
Start receptions commands issued to adapter. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetStartRxDmaTimeouts		1.3.6.1.4.1.2.6.12.2.3.3.2.1.51
DMA timeouts. Not supported on HP-UX, Sun Solaris and Digital UNIX. On AIX4, this variable is not supported for devices that are based on CDLI model.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceEthernetVPD		1.3.6.1.4.1.2.6.12.2.3.3.2.1.52
Vital Product Data from adapter. Not supported on HP-UX, Sun Solaris 2.x and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceEthernetClear		1.3.6.1.4.1.2.6.12.2.3.3.2.1.53
Set to clear to clear clearable statistics. Not supported on AIX and Digital UNIX.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), clear(2)

smSiaSystemDeviceX25Installed		1.3.6.1.4.1.2.6.12.2.3.4.1
The number of devices installed. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25Table		1.3.6.1.4.1.2.6.12.2.3.4.2
Adapter table. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemDeviceX25Entry

smSiaSystemDeviceX25Entry		1.3.6.1.4.1.2.6.12.2.3.4.2.1
Each entry contains objects for a particular device Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemDeviceX25Entry

smSiaSystemDeviceX25Number		1.3.6.1.4.1.2.6.12.2.3.4.2.1.1
smSiaSystemDeviceX25Number Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25Address		1.3.6.1.4.1.2.6.12.2.3.4.2.1.2
smSiaSystemDeviceX25Address Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceX25SupportLevel		1.3.6.1.4.1.2.6.12.2.3.4.2.1.3
smSiaSystemDeviceX25SupportLevel. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25SupportedFacilities		1.3.6.1.4.1.2.6.12.2.3.4.2.1.4
smSiaSystemDeviceX25SupportedFacilities. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25NetworkId		1.3.6.1.4.1.2.6.12.2.3.4.2.1.5
smSiaSystemDeviceX25NetworkId. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	PhysAddress

smSiaSystemDeviceX25MaxTxPacketSize		1.3.6.1.4.1.2.6.12.2.3.4.2.1.6
smSiaSystemDeviceX25MaxTxPacketSize. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25MaxRxPacketSize		1.3.6.1.4.1.2.6.12.2.3.4.2.1.7
smSiaSystemDeviceX25MaxRxPacketSize. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25DefaultSvcTxPacketSize		1.3.6.1.4.1.2.6.12.2.3.4.2.1.8
smSiaSystemDeviceX25DefaultSvcTxPacketSize. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25DefaultSvcRxPacketSize		1.3.6.1.4.1.2.6.12.2.3.4.2.1.9
smSiaSystemDeviceX25DefaultSvcRxPacketSize. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25ReceiveDataTransferOffset		1.3.6.1.4.1.2.6.12.2.3.4.2.1.10
smSiaSystemDeviceX25ReceiveDataTransferOffset. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25MemoryWindowSize		1.3.6.1.4.1.2.6.12.2.3.4.2.1.11
smSiaSystemDeviceX25MemoryWindowSize. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25TxByteMcnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.12
Most significant bits of successfully transmitted byte count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxByteLcnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.13
Least significant bits of successfully transmitted byte count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxByteMcnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.14
Most significant bits of successfully received byte count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxByteLcnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.15
Least significant bits of successfully received byte count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxFrameMcnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.16
Most significant bits of successfully transmitted byte count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxFrameLcnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.17
Least significant bits of successfully transmitted byte count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxFrameMcnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.18
Most significant bits of successfully received byte count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxFrameLcnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.19
Least significant bits of successfully received byte count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxErrCnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.20
Frame transmit error count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxErrCnt		1.3.6.1.4.1.2.6.12.2.3.4.2.1.21
Frame receive error count. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25NidTblHigh		1.3.6.1.4.1.2.6.12.2.3.4.2.1.22
Maximum netids in use. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25TxQueHigh		1.3.6.1.4.1.2.6.12.2.3.4.2.1.23
Maximum transmits ever queued for adapter. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemDeviceX25RxQueHigh		1.3.6.1.4.1.2.6.12.2.3.4.2.1.24
Maximum received ever queued for any open. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemDeviceX25StaQueHigh		1.3.6.1.4.1.2.6.12.2.3.4.2.1.25
Maximum status blocks queued for any open. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemDeviceX25IgnoredFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.26
smSiaSystemDeviceX25IgnoredFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RrFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.27
smSiaSystemDeviceX25RrFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RnrFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.28
smSiaSystemDeviceX25RnrFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RejFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.29
smSiaSystemDeviceX25RejFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25InfoFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.30
smSiaSystemDeviceX25InfoFTx Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25SabmFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.31
smSiaSystemDeviceX25SabmFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25SarmDmFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.32
smSiaSystemDeviceX25SarmDmFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25DiscFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.33
smSiaSystemDeviceX25DiscFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25UaFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.34
smSiaSystemDeviceX25UaFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25FrmrFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.35
smSiaSystemDeviceX25FrmrFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25BadNrFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.36
smSiaSystemDeviceX25BadNrFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25UnknownFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.37
smSiaSystemDeviceX25UnknownFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25XidFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.38
smSiaSystemDeviceX25XidFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25BadLengthFTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.39
smSiaSystemDeviceX25BadLengthFTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T1Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.40
smSiaSystemDeviceX25T1Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Lvl2Connects		1.3.6.1.4.1.2.6.12.2.3.4.2.1.41
smSiaSystemDeviceX25Lvl2Connects. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Lvl2Disconnects		1.3.6.1.4.1.2.6.12.2.3.4.2.1.42
smSiaSystemDeviceX25Lvl2Disconnects. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25CarrierLoss		1.3.6.1.4.1.2.6.12.2.3.4.2.1.43
smSiaSystemDeviceX25CarrierLoss. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ConnectTime		1.3.6.1.4.1.2.6.12.2.3.4.2.1.44
smSiaSystemDeviceX25ConnectTime. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaSystemDeviceX25T4Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.45
smSiaSystemDeviceX25T4Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T4N2Times		1.3.6.1.4.1.2.6.12.2.3.4.2.1.46
smSiaSystemDeviceX25T4N2Times. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25IgnoredFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.47
smSiaSystemDeviceX25IgnoredFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RrFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.48
smSiaSystemDeviceX25RrFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RnrFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.49
smSiaSystemDeviceX25RnrFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RejFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.50
smSiaSystemDeviceX25RejFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25InfoFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.51
smSiaSystemDeviceX25InfoFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25SabmFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.52
smSiaSystemDeviceX25SabmFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25SarmDmFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.53
smSiaSystemDeviceX25SarmDmFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25DiscFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.54
smSiaSystemDeviceX25DiscFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25UaFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.55
smSiaSystemDeviceX25UaFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25FrmrFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.56
smSiaSystemDeviceX25FrmrFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25BadNrFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.57
smSiaSystemDeviceX25BadNrFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25UnknownFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.58
smSiaSystemDeviceX25UnknownFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25XidFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.59
smSiaSystemDeviceX25XidFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25BadLengthFRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.60
smSiaSystemDeviceX25BadLengthFRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25DataPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.61
smSiaSystemDeviceX25DataPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RrPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.62
smSiaSystemDeviceX25RrPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RnrPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.63
smSiaSystemDeviceX25RnrPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25InterruptPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.64
smSiaSystemDeviceX25InterruptPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25InterruptConfirmPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.65
smSiaSystemDeviceX25InterruptConfirmPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25CallRequestPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.66
smSiaSystemDeviceX25CallRequestPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25CallAcceptPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.67
smSiaSystemDeviceX25CallAcceptPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ClearRequestPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.68
smSiaSystemDeviceX25ClearRequestPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ClearConfirmPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.69
smSiaSystemDeviceX25ClearConfirmPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ResetRequestPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.70
smSiaSystemDeviceX25ResetRequestPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ResetConfirmPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.71
smSiaSystemDeviceX25ResetConfirmPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25DiagnosticPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.72
smSiaSystemDeviceX25DiagnosticPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RegistrationPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.73
smSiaSystemDeviceX25RegistrationPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RegistrationConfirmPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.74
smSiaSystemDeviceX25RegistrationConfirmPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RestartPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.75
smSiaSystemDeviceX25RestartPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RestartConfirmPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.76
smSiaSystemDeviceX25RestartConfirmPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ErrorPTx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.77
smSiaSystemDeviceX25ErrorPTx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T20Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.78
smSiaSystemDeviceX25T20Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T21Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.79
smSiaSystemDeviceX25T21Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T22Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.80
smSiaSystemDeviceX25T22Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T23Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.81
smSiaSystemDeviceX25T23Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25VcEstablishments		1.3.6.1.4.1.2.6.12.2.3.4.2.1.82
smSiaSystemDeviceX25VcEstablishments. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T24Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.83
smSiaSystemDeviceX25T24Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T25Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.84
smSiaSystemDeviceX25T25Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T26Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.85
smSiaSystemDeviceX25T26Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25T28Expirations		1.3.6.1.4.1.2.6.12.2.3.4.2.1.86
smSiaSystemDeviceX25T28Expirations. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25DataPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.87
smSiaSystemDeviceX25DataPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RrPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.88
smSiaSystemDeviceX25RrPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RnrPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.89
smSiaSystemDeviceX25RnrPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25InterruptPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.90
smSiaSystemDeviceX25InterruptPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25InterruptConfirmPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.91
smSiaSystemDeviceX25InterruptConfirmPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25IncomingCallPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.92
smSiaSystemDeviceX25IncomingCallPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25CallConnectedPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.93
smSiaSystemDeviceX25CallConnectedPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ClearIndicationPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.94
smSiaSystemDeviceX25ClearIndicationPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ClearConfirmPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.95
smSiaSystemDeviceX25ClearConfirmPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ResetIndicationPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.96
smSiaSystemDeviceX25ResetIndicationPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25ResetConfirmPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.97
smSiaSystemDeviceX25ResetConfirmPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25DiagnosticPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.98
smSiaSystemDeviceX25DiagnosticPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RegistrationPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.99
smSiaSystemDeviceX25RegistrationPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RegistrationConfirmPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.100
smSiaSystemDeviceX25RegistrationConfirmPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RestartPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.101
smSiaSystemDeviceX25RestartPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RestartConfirmPRx		1.3.6.1.4.1.2.6.12.2.3.4.2.1.102
smSiaSystemDeviceX25RestartConfirmPRx. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxUnknownSize		1.3.6.1.4.1.2.6.12.2.3.4.2.1.103
smSiaSystemDeviceX25TxUnknownSize. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxReserved1		1.3.6.1.4.1.2.6.12.2.3.4.2.1.104
smSiaSystemDeviceX25TxReserved1. Not supported on HP-UX and Sun Solaris.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxReserved2		1.3.6.1.4.1.2.6.12.2.3.4.2.1.105
smSiaSystemDeviceX25TxReserved2. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxReserved3		1.3.6.1.4.1.2.6.12.2.3.4.2.1.106
smSiaSystemDeviceX25TxReserved3. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Tx0x15		1.3.6.1.4.1.2.6.12.2.3.4.2.1.107
smSiaSystemDeviceX25Tx0x15. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Tx16x31		1.3.6.1.4.1.2.6.12.2.3.4.2.1.108
smSiaSystemDeviceX25Tx16x31. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Tx32x63		1.3.6.1.4.1.2.6.12.2.3.4.2.1.109
smSiaSystemDeviceX25Tx32x63. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Tx64x127		1.3.6.1.4.1.2.6.12.2.3.4.2.1.110
smSiaSystemDeviceX25Tx64x127. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Tx128x255		1.3.6.1.4.1.2.6.12.2.3.4.2.1.111
smSiaSystemDeviceX25Tx128x255. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Tx256x511		1.3.6.1.4.1.2.6.12.2.3.4.2.1.112
smSiaSystemDeviceX25Tx256x511. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Tx512x1023		1.3.6.1.4.1.2.6.12.2.3.4.2.1.113
smSiaSystemDeviceX25Tx512x1023. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Tx1024x2047		1.3.6.1.4.1.2.6.12.2.3.4.2.1.114
smSiaSystemDeviceX25Tx1024x2047. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Tx2048x4095		1.3.6.1.4.1.2.6.12.2.3.4.2.1.115
smSiaSystemDeviceX25Tx2048x4095. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxReserved13		1.3.6.1.4.1.2.6.12.2.3.4.2.1.116
smSiaSystemDeviceX25TxReserved13. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxReserved14		1.3.6.1.4.1.2.6.12.2.3.4.2.1.117
smSiaSystemDeviceX25TxReserved14. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxReserved15		1.3.6.1.4.1.2.6.12.2.3.4.2.1.118
smSiaSystemDeviceX25TxReserved15. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25TxTotalPackets		1.3.6.1.4.1.2.6.12.2.3.4.2.1.119
smSiaSystemDeviceX25TxTotalPackets. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxUnknownSize		1.3.6.1.4.1.2.6.12.2.3.4.2.1.120
smSiaSystemDeviceX25RxUnknownSize. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxReserved1		1.3.6.1.4.1.2.6.12.2.3.4.2.1.121
smSiaSystemDeviceX25RxReserved1. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxReserved2		1.3.6.1.4.1.2.6.12.2.3.4.2.1.122
smSiaSystemDeviceX25RxReserved2. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxReserved3		1.3.6.1.4.1.2.6.12.2.3.4.2.1.123
smSiaSystemDeviceX25RxReserved3. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Rx0x15		1.3.6.1.4.1.2.6.12.2.3.4.2.1.124
smSiaSystemDeviceX25Rx0x15. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Rx16x31		1.3.6.1.4.1.2.6.12.2.3.4.2.1.125
smSiaSystemDeviceX25Rx16x31. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Rx32x63		1.3.6.1.4.1.2.6.12.2.3.4.2.1.126
smSiaSystemDeviceX25Rx32x63. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Rx64x127		1.3.6.1.4.1.2.6.12.2.3.4.2.1.127
smSiaSystemDeviceX25Rx64x127. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Rx128x255		1.3.6.1.4.1.2.6.12.2.3.4.2.1.128
smSiaSystemDeviceX25Rx128x255. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Rx256x511		1.3.6.1.4.1.2.6.12.2.3.4.2.1.129
smSiaSystemDeviceX25Rx256x511. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Rx512x1023		1.3.6.1.4.1.2.6.12.2.3.4.2.1.130
smSiaSystemDeviceX25Rx512x1023. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Rx1024x2047		1.3.6.1.4.1.2.6.12.2.3.4.2.1.131
smSiaSystemDeviceX25Rx1024x2047. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Rx2048x4095		1.3.6.1.4.1.2.6.12.2.3.4.2.1.132
smSiaSystemDeviceX25Rx2048x4095. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxReserved13		1.3.6.1.4.1.2.6.12.2.3.4.2.1.133
smSiaSystemDeviceX25RxReserved13. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxReserved14		1.3.6.1.4.1.2.6.12.2.3.4.2.1.134
smSiaSystemDeviceX25RxReserved14. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxReserved15		1.3.6.1.4.1.2.6.12.2.3.4.2.1.135
smSiaSystemDeviceX25RxReserved15. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25RxTotalPackets		1.3.6.1.4.1.2.6.12.2.3.4.2.1.136
smSiaSystemDeviceX25RxTotalPackets. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemDeviceX25Clear		1.3.6.1.4.1.2.6.12.2.3.4.2.1.137
Set to clear to clear clearable statistics. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), clear(2)

smSiaSystemDeviceX25RouteCount		1.3.6.1.4.1.2.6.12.2.3.4.3
The number of devices installed. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25RouteTable		1.3.6.1.4.1.2.6.12.2.3.4.4
Routing information. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemDeviceX25RouteEntry

smSiaSystemDeviceX25RouteEntry		1.3.6.1.4.1.2.6.12.2.3.4.4.1
Each entry contains objects for a particular route. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemDeviceX25RouteEntry

smSiaSystemDeviceX25RouteNumber		1.3.6.1.4.1.2.6.12.2.3.4.4.1.1
Route Entry number. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25RouteEntryName		1.3.6.1.4.1.2.6.12.2.3.4.4.1.2
Route name. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceX25RouteUserName		1.3.6.1.4.1.2.6.12.2.3.4.4.1.3
User name. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceX25RoutePort		1.3.6.1.4.1.2.6.12.2.3.4.4.1.4
Port. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceX25RouteCallingAddress		1.3.6.1.4.1.2.6.12.2.3.4.4.1.5
Calling address. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceX25RouteCalledSubaddress		1.3.6.1.4.1.2.6.12.2.3.4.4.1.6
Called subaddress. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceX25RouteCallingAddressExt		1.3.6.1.4.1.2.6.12.2.3.4.4.1.7
Calling address extension. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceX25RouteCalledAddressExt		1.3.6.1.4.1.2.6.12.2.3.4.4.1.8
Called address extension. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceX25RouteCalledUserData		1.3.6.1.4.1.2.6.12.2.3.4.4.1.9
Called address extension. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemDeviceX25RoutePriority		1.3.6.1.4.1.2.6.12.2.3.4.4.1.10
Priority. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemDeviceX25RouteAction		1.3.6.1.4.1.2.6.12.2.3.4.4.1.11
Action taken when no listening application is running. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	forward(1), reject(2)

smSiaSystemFileSystemMounted		1.3.6.1.4.1.2.6.12.2.5.1
The number of file systems mounted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemFileSystemTable		1.3.6.1.4.1.2.6.12.2.5.2
File system table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemFileSystemEntry

smSiaSystemFileSystemEntry		1.3.6.1.4.1.2.6.12.2.5.2.1
Each entry contains objects for a particular file system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemFileSystemEntry

smSiaSystemFileSystemName		1.3.6.1.4.1.2.6.12.2.5.2.1.1
Name of mount point for a file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemFileSystemSize		1.3.6.1.4.1.2.6.12.2.5.2.1.2
Total kilobytes in file system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemFileSystemFree		1.3.6.1.4.1.2.6.12.2.5.2.1.3
Free file system space in kilobytes. Set a threshold against this variable to monitor for a filesystem to run out of space. The /var and /tmp directories are good candidates for monitoring, since they are often used by applications and an out-of-space condition can result in errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemFileSystemPercentUsed		1.3.6.1.4.1.2.6.12.2.5.2.1.4
Percent of file system used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemFileSystemInodesUsed		1.3.6.1.4.1.2.6.12.2.5.2.1.5
Used inodes in file system. Not supported for remote file systems for HP-UX, Sun Solaris 2.x and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemFileSystemInodesPercentUsed		1.3.6.1.4.1.2.6.12.2.5.2.1.6
Percent inodes used. Not supported for remote file systems for HP-UX, Sun Solaris 2.x and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemFileSystemInodeCount		1.3.6.1.4.1.2.6.12.2.5.2.1.7
Inode count. Not supported for remote file systems for HP-UX, Sun Solaris 2.x and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemFileSystemFileSystem		1.3.6.1.4.1.2.6.12.2.5.2.1.8
NFS File system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemFileSystemRemote		1.3.6.1.4.1.2.6.12.2.5.2.1.9
Remote node for remotely mounted filesystems.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemSubSystemsCount		1.3.6.1.4.1.2.6.12.2.6.1
The number of subsystems in table. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemSubSystemsTable		1.3.6.1.4.1.2.6.12.2.6.2
Subsystems table. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemSubSystemsEntry

smSiaSystemSubSystemsEntry		1.3.6.1.4.1.2.6.12.2.6.2.1
Each entry contains objects for a particular file system. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemSubSystemsEntry

smSiaSystemSubSystemsName		1.3.6.1.4.1.2.6.12.2.6.2.1.1
Name of sub system. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemSubSystemsPID		1.3.6.1.4.1.2.6.12.2.6.2.1.2
PID of subsystem, if active. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemSubSystemsStatusDescription		1.3.6.1.4.1.2.6.12.2.6.2.1.3
Process group. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemSubSystemsStatusText		1.3.6.1.4.1.2.6.12.2.6.2.1.4
Status text. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemSubSystemsStatusCode		1.3.6.1.4.1.2.6.12.2.6.2.1.5
Integer status code. Indicates whether the subsystem is active or inoperative. A value of 1 indicates the subsystem is active; a value of 11 indicates that it is inoperative. Not supported on HP-UX, Sun Solaris and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessCount		1.3.6.1.4.1.2.6.12.2.7.1
The number of processes in table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemProcessTable		1.3.6.1.4.1.2.6.12.2.7.2
Process table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemProcessEntry

smSiaSystemProcessEntry		1.3.6.1.4.1.2.6.12.2.7.2.1
Each entry contains objects for a particular file system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemProcessEntry

smSiaSystemProcessLoginUser		1.3.6.1.4.1.2.6.12.2.7.2.1.1
Name of user to whom process belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemProcessPID		1.3.6.1.4.1.2.6.12.2.7.2.1.2
Process ID. This can be a useful variable to monitor if you want to make sure a process is running or you want to watch for a process to be started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessParentPID		1.3.6.1.4.1.2.6.12.2.7.2.1.3
Parent Process ID
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessCPUTime		1.3.6.1.4.1.2.6.12.2.7.2.1.4
Total CPU Time used since startup
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaSystemProcessUserTime		1.3.6.1.4.1.2.6.12.2.7.2.1.5
CPU Time used in user mode since startup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaSystemProcessSystemTime		1.3.6.1.4.1.2.6.12.2.7.2.1.6
CPU Time used in system mode since startup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaSystemProcessPageFaultsIO		1.3.6.1.4.1.2.6.12.2.7.2.1.7
Number of Page faults requiring I/O.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessPageFaultsNoIO		1.3.6.1.4.1.2.6.12.2.7.2.1.8
Number of Page faults not requiring I/O.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessPriority		1.3.6.1.4.1.2.6.12.2.7.2.1.9
Process Priority
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessNice		1.3.6.1.4.1.2.6.12.2.7.2.1.10
Process Nice Value
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessState		1.3.6.1.4.1.2.6.12.2.7.2.1.11
Current Process state
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sleep(1), run(3), iDL(4), zombie(5), stop(6), none(666)

smSiaSystemProcessWait		1.3.6.1.4.1.2.6.12.2.7.2.1.12
Process wait reason. On Sun Solaris, the process wait reason may be none or event. This variable does not provide additional details on the type of event. Not supported on HP-UX or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	event(1), lock(2), timer(3), cpu(4), pageIn(5), pageOut(6), pLock(7), pageFree(8), memory(9), none(666)

smSiaSystemProcessDataResidentSetSize		1.3.6.1.4.1.2.6.12.2.7.2.1.13
Data resident set size in kilobytes. On Digital UNIX, this variable is the resident set size for the entire process. On Sun Solaris, statistics for resident set size for the text, data, and stack segments are not maintained separately. This variable is the total resident set size for all three segments.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessTextResidentSetSize		1.3.6.1.4.1.2.6.12.2.7.2.1.14
Text resident set size in kilobytes. Not supported on Sun Solaris 2.x or Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessImageSize		1.3.6.1.4.1.2.6.12.2.7.2.1.15
core image size. On Sun Solaris, this variable is the total of the text, data, and stack segments. On AIX and HP-UX, this variable is the same as smSiaSystemProcessDataVirtualMemorySize.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessDataVirtualMemorySize		1.3.6.1.4.1.2.6.12.2.7.2.1.16
Data Virtual Memory size. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessPercentMemory		1.3.6.1.4.1.2.6.12.2.7.2.1.17
Percentage of real memory used. Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessCPU		1.3.6.1.4.1.2.6.12.2.7.2.1.18
Percentage of CPU used on each process. This variable is not supported on Sun Solaris 2.x.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessStartTime		1.3.6.1.4.1.2.6.12.2.7.2.1.19
Process starting time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemProcessCommand		1.3.6.1.4.1.2.6.12.2.7.2.1.20
Process starting command.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemProcessLoginUID		1.3.6.1.4.1.2.6.12.2.7.2.1.21
Login User ID Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessEffectiveUID		1.3.6.1.4.1.2.6.12.2.7.2.1.22
Effective User ID
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessEffectiveGID		1.3.6.1.4.1.2.6.12.2.7.2.1.23
Effective Group ID. Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessEffectiveGroupName		1.3.6.1.4.1.2.6.12.2.7.2.1.24
Effective Group Name. Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemProcessSUID		1.3.6.1.4.1.2.6.12.2.7.2.1.25
Saved User ID
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessPgrp		1.3.6.1.4.1.2.6.12.2.7.2.1.26
Process group
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessPFlags		1.3.6.1.4.1.2.6.12.2.7.2.1.27
Process flags - look in /usr/include/sys/proc.h
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessAdspace		1.3.6.1.4.1.2.6.12.2.7.2.1.28
Process Address space. Not supported on Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemProcessTTYp		1.3.6.1.4.1.2.6.12.2.7.2.1.29
Whether process has a controlling tty.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessTTYd		1.3.6.1.4.1.2.6.12.2.7.2.1.30
Process Controlling TTY
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemProcessNSwap		1.3.6.1.4.1.2.6.12.2.7.2.1.31
Number of times process swapped out. Supported on HP-UX 9.0 only on Series 800 machines.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessInblocks		1.3.6.1.4.1.2.6.12.2.7.2.1.32
File blocks input Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessOutblocks		1.3.6.1.4.1.2.6.12.2.7.2.1.33
File blocks output. Supported on HP-UX 9.0 only on Series 800 machines.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessMsgsnd		1.3.6.1.4.1.2.6.12.2.7.2.1.34
Number of IPC Messages sent. Supported on HP-UX 9.0 only on Series 800 machines.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessMsgrcv		1.3.6.1.4.1.2.6.12.2.7.2.1.35
Number of IPC Messages received. Supported on HP-UX 9.0 only on Series 800 machines.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessNsignals		1.3.6.1.4.1.2.6.12.2.7.2.1.36
Number of Signals delivered. Supported on HP-UX 9.0 only on Series 800 machines.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessNVcsw		1.3.6.1.4.1.2.6.12.2.7.2.1.37
Number of Voluntary context switches. Supported on HP-UX 9.0 only on Series 800 machines.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessNIvcsw		1.3.6.1.4.1.2.6.12.2.7.2.1.38
Number of Involuntary context switches. Supported on HP-UX 9.0 only on Series 800 machines.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemProcessArguments		1.3.6.1.4.1.2.6.12.2.7.2.1.39
Process command syntax in full path
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemProcessSignal		1.3.6.1.4.1.2.6.12.2.7.2.1.40
Sends a signal to process when set Currently reserved. Not supported on HP-UX.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	sighup(1), sigint(2), sigquit(3), sigill(4), sigtrap(5), sigabrt(6), sigemt(7), sigfpe(8), sigkill(9), sigbus(10), sigsegv(11), sigsys(12), sigpipe(13), sigalrm(14), sigterm(15), sigurg(16), sigstop(17), sigtstp(18), sigcont(19), sigchld(20), sigttin(21), sigttou(22), sigio(23), sigxcpu(24), sigxfsz(25), sigmsg(27), sigwinch(28), sigpwr(29), sigusr1(30), sigusr2(31), sigprof(32), sigdanger(33), sigvtalrm(34), sigmigrate(35), sigpre(36), sigvirt(37), siggrant(60), sigretract(61), sigsound(62), sigsak(63)

smSiaSystemUsersLoggedIn		1.3.6.1.4.1.2.6.12.2.8.1
The number of users logged in
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

smSiaSystemUsersTable		1.3.6.1.4.1.2.6.12.2.8.2
User table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemUsersEntry

smSiaSystemUsersEntry		1.3.6.1.4.1.2.6.12.2.8.2.1
Each entry contains objects for a particular user.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemUsersEntry

smSiaSystemUsersName		1.3.6.1.4.1.2.6.12.2.8.2.1.1
User name
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemUsersLine		1.3.6.1.4.1.2.6.12.2.8.2.1.2
Device name
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemUsersTime		1.3.6.1.4.1.2.6.12.2.8.2.1.3
Login time
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemUsersPID		1.3.6.1.4.1.2.6.12.2.8.2.1.4
Process ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUsersRemoteHost		1.3.6.1.4.1.2.6.12.2.8.2.1.5
Remote hostname. This is a good variable to watch for security appliations. Monitor for unknown hostnames and send a trap when one is found.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemMiscellaneousTimeText		1.3.6.1.4.1.2.6.12.2.11.1
Current System Time
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemMiscellaneousTime		1.3.6.1.4.1.2.6.12.2.11.2
Current system time, seconds since reference time
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

smSiaSystemMiscellaneousRandom		1.3.6.1.4.1.2.6.12.2.11.3
A random number generated by the random() call
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemMiscellaneousFreeSpace		1.3.6.1.4.1.2.6.12.2.11.4
Unallocated space in active volume groups, in kilobytes. Not supported on HP-UX, Sun Solaris 2.4 and Digital UNIX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemMiscellaneousPublicKey		1.3.6.1.4.1.2.6.12.2.11.5
Reserved.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaSystemMiscellaneousLocalSocket		1.3.6.1.4.1.2.6.12.2.11.6
Reserved.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPU		1.3.6.1.4.1.2.6.12.2.9.1
OBJECT IDENTIFIER

smSiaSystemUtilizationKernel		1.3.6.1.4.1.2.6.12.2.9.2
OBJECT IDENTIFIER

smSiaSystemUtilizationIostat		1.3.6.1.4.1.2.6.12.2.9.3
OBJECT IDENTIFIER

smSiaSystemUtilizationCPUPollingInterval		1.3.6.1.4.1.2.6.12.2.9.1.1
Polling Interval for CPU data Currently reserved.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUCount		1.3.6.1.4.1.2.6.12.2.9.1.2
Number of CPUs in system
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUTable		1.3.6.1.4.1.2.6.12.2.9.1.3
CPU Utilization table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemUtilizationCPUEntry

smSiaSystemUtilizationCPUEntry		1.3.6.1.4.1.2.6.12.2.9.1.3.1
Each entry contains CPU over a different interval
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemUtilizationCPUEntry

smSiaSystemUtilizationCPUIntervalName		1.3.6.1.4.1.2.6.12.2.9.1.3.1.1
Description of interval
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemUtilizationCPUIntervalStartTime		1.3.6.1.4.1.2.6.12.2.9.1.3.1.2
Start time of interval
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemUtilizationCPUIntervalLength		1.3.6.1.4.1.2.6.12.2.9.1.3.1.3
Length of Interval over which CPU computed
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaSystemUtilizationCPUUser		1.3.6.1.4.1.2.6.12.2.9.1.3.1.4
Average Percent CPU in user mode over the interval. Monitor this value to get inforamtion about utilization of CPU in user mode. This information can also be retrieved using the vmstat or iostat command.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUSystem		1.3.6.1.4.1.2.6.12.2.9.1.3.1.5
Average Percent CPU in system mode over the interval: the count is incremented whenever the current running process executes in the kernel mode. This information can also be retrieved using the vmstat or iostat commands.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUIdle		1.3.6.1.4.1.2.6.12.2.9.1.3.1.6
Average Percent CPU in idle mode over the interval: the cpu idle count is incremented whenever the 'wait' process is the current running process.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUWait		1.3.6.1.4.1.2.6.12.2.9.1.3.1.7
Average Percent CPU in wait mode over the interval. The count is incremented whenever the current running process is waiting for a block i/o request to complete.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUBusy		1.3.6.1.4.1.2.6.12.2.9.1.3.1.8
Average Percent CPU in user and system mode over the interval. Gives a good indication of of CPU utilization for the whole system. This information can also be retrieved using the vmstat or iostat commands.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUUserMinimum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.9
Minimum Percent CPU user mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUSystemMinimum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.10
Minimum Percent CPU system mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUIdleMinimum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.11
Minimum Percent CPU idle mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUWaitMinimum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.12
Minimum Percent CPU idle mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUBusyMinimum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.13
Minimum Percent CPU user and system mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUUserMaximum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.14
Maximum Percent CPU user mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUSystemMaximum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.15
Maximum Percent CPU system mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUIdleMaximum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.16
Maximum Percent CPU idle mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUWaitMaximum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.17
Maximum Percent CPU idle mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUBusyMaximum		1.3.6.1.4.1.2.6.12.2.9.1.3.1.18
Maximum Percent CPU user and system mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationCPUNumber		1.3.6.1.4.1.2.6.12.2.9.1.3.1.19
CPU Number this row applies to
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelPollingInterval		1.3.6.1.4.1.2.6.12.2.9.2.1
Polling Interval for Utilization kernel data. Currently reserved.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelTable		1.3.6.1.4.1.2.6.12.2.9.2.2
Kernel statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemUtilizationKernelEntry

smSiaSystemUtilizationKernelEntry		1.3.6.1.4.1.2.6.12.2.9.2.2.1
Each entry contains Utilization Kernel over a different interval
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemUtilizationKernelEntry

smSiaSystemUtilizationKernelName		1.3.6.1.4.1.2.6.12.2.9.2.2.1.1
Description of interval
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemUtilizationKernelIntervalStartTime		1.3.6.1.4.1.2.6.12.2.9.2.2.1.2
Start time of interval- gives the date and time at which the interval started
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemUtilizationKernelIntervalLength		1.3.6.1.4.1.2.6.12.2.9.2.2.1.3
Length of Interval over which Utilization Kernel computed
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaSystemUtilizationKernelContextSwitches		1.3.6.1.4.1.2.6.12.2.9.2.2.1.4
The number of context switches per second observed in the sample interval
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSystemCalls		1.3.6.1.4.1.2.6.12.2.9.2.2.1.5
The number of system calls per second observed in the sample interval
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSystemReads		1.3.6.1.4.1.2.6.12.2.9.2.2.1.6
Total number of system reads
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSystemWrites		1.3.6.1.4.1.2.6.12.2.9.2.2.1.7
Total number of system writes
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelForks		1.3.6.1.4.1.2.6.12.2.9.2.2.1.8
Total number of forks system calls
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelExecs		1.3.6.1.4.1.2.6.12.2.9.2.2.1.9
Total number of EXEC system calls
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelRunQueue		1.3.6.1.4.1.2.6.12.2.9.2.2.1.10
Number of jobs per second placed on the run queue during the interval. The processes placed in the run queue are the processes that are ready to run.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSwapQueue		1.3.6.1.4.1.2.6.12.2.9.2.2.1.11
Number of jobs per second placed on the swap queue. These are the processes that are inactive because they are waiting to be paged in.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSemaphores		1.3.6.1.4.1.2.6.12.2.9.2.2.1.12
Total number of semaphore operations
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelMessages		1.3.6.1.4.1.2.6.12.2.9.2.2.1.13
Total number of message operations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelProcessOverflow		1.3.6.1.4.1.2.6.12.2.9.2.2.1.14
Total number of process creation failures: this field is incremented by one whenever an attempt is made to create a kernel process and one of the following happens: - the user has forked to the maximum limit the user is allowed or - the configuration limit of processes has been reached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelBytesRead		1.3.6.1.4.1.2.6.12.2.9.2.2.1.15
Total bytes read. This variable is not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelBytesWritten		1.3.6.1.4.1.2.6.12.2.9.2.2.1.16
Total bytes written. This variable is not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelRawTTYOut		1.3.6.1.4.1.2.6.12.2.9.2.2.1.17
Total raw TTY out count
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelContextSwitchesMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.18
Minimum context switches
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSystemCallsMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.19
Minimum system calls
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSystemReadsMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.20
Minimum system reads.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSystemWritesMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.21
Minimum system writes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelForksMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.22
Minimum forks
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelExecsMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.23
Minimum execs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelRunQueueMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.24
Minimum run queue length
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSwapQueueMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.25
Minimum swap queue length
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSemaphoresMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.26
Minimum semaphore operations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelMessagesMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.27
Minimum message operations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelProcessOverflowMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.28
Minimum process creation failures.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelBytesReadMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.29
Minimum bytes read Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelBytesWrittenMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.30
Minimum bytes written Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelRawTTYOutMinimum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.31
Minimum raw TTY out count
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelContextSwitchesMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.32
Maximum context switches
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSystemCallsMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.33
Maximum system calls
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSystemReadsMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.34
Maximum system reads Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSystemWritesMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.35
Maximum system writes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelForksMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.36
Maximum forks
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelExecsMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.37
Maximum execs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelRunQueueMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.38
Maximum run queue length
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSwapQueueMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.39
Maximum swap queue length
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelSemaphoresMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.40
Maximum semaphore operations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelMessagesMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.41
Maximum message operations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelProcessOverflowMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.42
Maximum process creation failures.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelBytesReadMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.43
Maximum bytes read Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelBytesWrittenMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.44
Maximum bytes written Not supported on HP-UX.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationKernelRawTTYOutMaximum		1.3.6.1.4.1.2.6.12.2.9.2.2.1.45
Maximum raw TTY out count
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatPollingInterval		1.3.6.1.4.1.2.6.12.2.9.3.1
Polling interval for IO statistics data. Currently reserved.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatTable		1.3.6.1.4.1.2.6.12.2.9.3.2
Input/Output statistics table. On HP-UX, not supported for some types of disks. On Sun Solaris, removable devices, such as cdroms, must be mounted when sysinfod starts in order to be entered into this table. When the removable device is dismounted and remounted later, it will be treated as a new device and activities will not be added to the table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaSystemUtilizationIostatEntry

smSiaSystemUtilizationIostatEntry		1.3.6.1.4.1.2.6.12.2.9.3.2.1
Each entry contains IO statistics over a different interval
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaSystemUtilizationIostatEntry

smSiaSystemUtilizationIostatName		1.3.6.1.4.1.2.6.12.2.9.3.2.1.1
Description of interval - returns hard disk name and the interval length
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemUtilizationIostatIntervalStartTime		1.3.6.1.4.1.2.6.12.2.9.3.2.1.2
Start time of interval- gives the date and time at which the interval started
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaSystemUtilizationIostatIntervalLength		1.3.6.1.4.1.2.6.12.2.9.3.2.1.3
Length of interval over which IO statistics were computed
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

smSiaSystemUtilizationIostatPercentTimeActive		1.3.6.1.4.1.2.6.12.2.9.3.2.1.4
Average Percent Time when the hard disk was busy: that is the total time in an interval, when disk i/o took place, divided by the length of interval. The result is multiplied by the programControlPercentMultiplier and then displayed. On HP-UX, not supported for some types of disks.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatKilobytesTransferRate		1.3.6.1.4.1.2.6.12.2.9.3.2.1.5
Average Transfer Rate: the sum of the kilobyes read and kilobytes written over an interval divided by the length of the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatTransfers		1.3.6.1.4.1.2.6.12.2.9.3.2.1.6
Average number of kilobytes transfered to and from disk. The value is obtained from the kernel memory using field 'dk_xfers' of structure 'dkstat' defined in iostat.h.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatKilobytesRead		1.3.6.1.4.1.2.6.12.2.9.3.2.1.7
Number of Kilobytes read over the interval On HP-UX and Digital UNIX, this variable is the total kilobytes transferred (read OR written) during the time interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatKilobytesWritten		1.3.6.1.4.1.2.6.12.2.9.3.2.1.8
Number of kilobytes written over the interval On HP-UX and Digital UNIX, this variable always has a value of zero. Statistics for kilobytes written are included in the variable smSiaSystemUtilizationIostatKilobytesRead.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatPercentTimeActiveMinimum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.9
Minimum Percent Time Active
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatKilobytesTransferRateMinimum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.10
Minimum Transfer Rate: that is sum of minimum number of kilobytes read and written divided by the length of the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatTransfersMinimum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.11
Minimum Number of Transfers
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatKilobytesReadMinimum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.12
Minimum kilobytes read
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatKilobytesWrittenMinimum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.13
Minimum kilobytes written
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatPercentTimeActiveMaximum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.14
Maximum percentage Time Active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatKilobytesTransferRateMaximum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.15
Maximum Transfer Rate
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatTransfersMaximum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.16
Maximum Number of Transfers
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatKilobytesReadMaximum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.17
Maximum Number of Kilobytes read
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaSystemUtilizationIostatKilobytesWrittenMaximum		1.3.6.1.4.1.2.6.12.2.9.3.2.1.18
Maximum Number of Kilobytes written
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaCommandTable		1.3.6.1.4.1.2.6.12.4.1
Command table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaCommandEntry

smSiaCommandEntry		1.3.6.1.4.1.2.6.12.4.1.1
Each entry contains objects for a particular command.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaCommandEntry

smSiaCommandState		1.3.6.1.4.1.2.6.12.4.1.1.1
State of command for execution - disabled (1), invalid (2), or enabled (3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(3), disabled(1), invalid(2)

smSiaCommandName		1.3.6.1.4.1.2.6.12.4.1.1.2
Command name for use as a label and row instance. The selection of a row in the table uses the command name as the instance for the row selection. The command name is appended to the row object ID to uniquely identify the instance of this variable. For example, the instance of smSiaCommandState is smSiaCommandState.smSiaCommandName, where each octet in smSiaCommandName is a value in dot notation for the variable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaCommandDescription		1.3.6.1.4.1.2.6.12.4.1.1.3
Command description for the command to execute.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaCommandOwnerID		1.3.6.1.4.1.2.6.12.4.1.1.4
Owner ID (IP address or hostname) who generated the command entry. This must be initialized by the user.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaCommandGetStringAndParameters		1.3.6.1.4.1.2.6.12.4.1.1.5
Command string and parameters for execution on a GET request. The GET request must be issued to the smSiaCommandDisplayStringResult, smSiaCommandIntegerResult, smSiaCommandCounterResult, or smSiaCommandGaugeResult for the command to be executed. Environment variables which are available on execution are: SM6K_HOSTNAME={hostname running subagent} SM6K_DOMAIN_NAME={fully qualified hostname} SM6K_HOST_ADDRESS={ip address} SM6K_INSTANCE_NAME={instance string of row} SM6K_INSTANCE_ID={instance ASCII octet value of row} SM6K_COMMAND_TIME_OUT_VALUE={value from TimeOutValue} SM6K_COMMAND_OWNERID={string from OwnerID} SM6K_COMMAND_RESULT_TYPE=DisplayString||Integer||Counter|| Gauge SM6K_COMMAND_SET_VALUE={value from get request} SM6K_EXECUTION_REASON=Command_Get
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaCommandSetStringAndParameters		1.3.6.1.4.1.2.6.12.4.1.1.6
Command string and parameters for execution on a SET request. The SET request must be issued to the smSiaCommandDisplayStringResult, smSiaCommandIntegerResult, smSiaCommandCounterResult, or smSiaCommandGaugeResult for the command to be executed. The SM6K_COMMAND_SET_VALUE contains the value from the SET request. If the execution of the command returns a non-zero exit return code then the SET request is rejected and a badValue is returned from the SNMPD agent. Environment variables which are available on command execution are: SM6K_COMMAND_SET_VALUE={value from set request} SM6K_HOSTNAME={hostname running subagent} SM6K_DOMAIN_NAME={fully qualified hostname} SM6K_HOST_ADDRESS={ip address} SM6K_INSTANCE_NAME={instance string of row} SM6K_INSTANCE_ID={instance ASCII octet value of row} SM6K_COMMAND_TIME_OUT_VALUE={value from TimeOutValue} SM6K_COMMAND_OWNERID={string from OwnerID} SM6K_COMMAND_RESULT_TYPE=DisplayString||Integer||Counter|| Gauge SM6K_EXECUTION_REASON=Command_Set
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaCommandTimeOutValue		1.3.6.1.4.1.2.6.12.4.1.1.7
Time out value in seconds for command execution. The default is three seconds. Time outs over twenty seconds cause subagent performance degradation for multiple requests which may be queued.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaCommandCountToLive		1.3.6.1.4.1.2.6.12.4.1.1.8
Count to live in seconds before the command to execute is executed again. This value is a count down from the time to live value. This allows multiple GET requests for parsing of the output from the command execution. It also allows a SET operation followed by a GET request so that the GET command is NOT executed on the GET request.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaCommandTimeToLive		1.3.6.1.4.1.2.6.12.4.1.1.9
Time to live value in seconds before the GET or SET command is executed based on the last time the command was run. The CountToLive variable is set to this value at command execution.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaCommandOutputResultIndex		1.3.6.1.4.1.2.6.12.4.1.1.10
Index to point to command output result type. The results of the command execution are converted to the type set, displaystring, integer, counter, or gauge.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	displaystring(1), integer(2), counter(3), gauge(4)

smSiaCommandOutputRowIndex		1.3.6.1.4.1.2.6.12.4.1.1.11
Index for the row to be returned. New line is the delimiter for row. A value of zero returns all rows. This allows the parsing of the output from the command execution by row.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaCommandOutputColumnIndex		1.3.6.1.4.1.2.6.12.4.1.1.12
Index for the column to be returned. White space is the delimiter for the column. A value of zero returns all columns. This allows the parsing of the output from the command execution by column.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaCommandDisplayStringResult		1.3.6.1.4.1.2.6.12.4.1.1.13
Command output for ASCII.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaCommandIntegerResult		1.3.6.1.4.1.2.6.12.4.1.1.14
Command result for integer. For each get/set request the response is saved as a signed integer. The range is -2147483648 to 2147483647.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

smSiaCommandCounterResult		1.3.6.1.4.1.2.6.12.4.1.1.15
Command result for counter. For each get/set request the command response is saved as an unsigned integer. The range is 0 to 4294967295.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Counter

smSiaCommandGaugeResult		1.3.6.1.4.1.2.6.12.4.1.1.16
Command result for gauge. For each get/set request the command response is saved as an unsigned integer. The range is 0 to 4294967295.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Gauge

smSiaCommandExecutionReturnCode		1.3.6.1.4.1.2.6.12.4.1.1.17
Return code from the command execution. This value is the exit status from the command execution. NOTE: because of the 'wait' system call, only the lower 8 bits of the exit status is returned, so negative exit codes are lost. Therefore, all return codes are 0 - 255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaCommandStandardError		1.3.6.1.4.1.2.6.12.4.1.1.18
Standard error output from the command execution.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaAdministrationTable		1.3.6.1.4.1.2.6.12.20.1
Table of user information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaAdministrationEntry

smSiaAdministrationEntry		1.3.6.1.4.1.2.6.12.20.1.1
Each entry contains objects for a particular administrative community.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaAdministrationEntry

smSiaAdministrationFieldState		1.3.6.1.4.1.2.6.12.20.1.1.1
Indication that administrative information is either valid (1), invalid (2), or outdated (3). Note: Setting state to invalid will delete the row.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	valid(1), invalid(2), outDated(3)

smSiaAdministrationFieldName		1.3.6.1.4.1.2.6.12.20.1.1.2
Name of administrative information. There should be a corporate-wide policy on naming information in order to avoid possible naming conflicts.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaAdministrationFieldOwner		1.3.6.1.4.1.2.6.12.20.1.1.3
Owner of this piece of administrative information.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaAdministrationFieldDescription		1.3.6.1.4.1.2.6.12.20.1.1.4
Description of the administrative information.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaAdministrationFieldValue		1.3.6.1.4.1.2.6.12.20.1.1.5
The actual administrative information.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorTable		1.3.6.1.4.1.2.6.12.21.1
File Monitor table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SmSiaFileMonitorEntry

smSiaFileMonitorEntry		1.3.6.1.4.1.2.6.12.21.1.1
Each entry contains objects for a particular file.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SmSiaFileMonitorEntry

smSiaFileMonitorState		1.3.6.1.4.1.2.6.12.21.1.1.1
State of file monitor entry - disabled (1), invalid (2), enabled (3), enabledFromBegin (4).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(3), enabledFromBegin(4), disabled(1), invalid(2)

smSiaFileMonitorName		1.3.6.1.4.1.2.6.12.21.1.1.2
File Monitor name for use as a label and row instance. The selection of a row in the table uses the file monitor name as the instance for the row selection. The file monitor name is appended to the row object ID to uniquely identify the instance of this variable. For example, the instance of smSiaFileMonitorState is smSiaFileMonitorState.smSiaFileMonitorName, where each octet in smSiaFileMonitorName is a value in dot notation for the variable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorType		1.3.6.1.4.1.2.6.12.21.1.1.3
Type of file monitor entry - string (1), dataChange (2), statusChange (3), strDataStatus (4), notExist (5), exist (6), all (7), notString(8).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	string(1), dataChange(2), statusChange(3), strDataStatus(4), notExist(5), exist(6), all(7), notString(8)

smSiaFileMonitorTrapState		1.3.6.1.4.1.2.6.12.21.1.1.4
Trap state for file monitor entry - send (1) or noSend (2). Not supported for Systems Monitor Version 1. Type of Traps: generic 6 specific 21 : String found MIB variable binding: v1 = Entry name v2 = Entry description v3 = Full path filename v4 = time string found v5 = file size v6 = previous file size v7 = line count of file v8 = search for string v9 = Found string count v10 = Actual string found v11 = Line number string found v12 = Character position in line string was found v13 = complete line string was found v14 = Character position in file string was found generic 6 specific 22 : File data modified MIB variable binding: v1 = Entry name v2 = Entry description v3 = Full path filename v4 = Time of data modification v5 = Size of file v6 = previous size of file generic 6 specific 23 : File status changed MIB variable binding: v1 = Entry name v2 = Entry description v3 = Full path filename v4 = Time of status change v5 = mode of of file v6 = userID of file v7 = groupID of file v8 = previous mode of of file v9 = previous userID of file v10 = previous groupID of file generic 6 specific 24 : File does not exist MIB variable binding: v1 = Entry name v2 = Entry description v3 = Full path filename generic 6 specific 25 : File exists MIB variable binding: v1 = Entry name v2 = Entry description v3 = Full path filename v4 = Time file creation v5 = mode of of file v6 = userID of file v7 = groupID of file generic 6 specific 26 : String not found MIB variable binding: v1 = Entry name v2 = Entry description v3 = Full path filename v4 = search for string
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	send(1), noSend(2)

smSiaFileMonitorCaseState		1.3.6.1.4.1.2.6.12.21.1.1.5
Case state for string search: case (1) or ignoreCase (2). On Solaris 2.4, search is always case-sensitive.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	case(1), ignoreCase(2)

smSiaFileMonitorDescription		1.3.6.1.4.1.2.6.12.21.1.1.6
File Monitor description for this file monitor entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorOwnerID		1.3.6.1.4.1.2.6.12.21.1.1.7
Owner ID (IP address or hostname) who generated the file monitor entry. This must be initialized by the user.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorFullPathName		1.3.6.1.4.1.2.6.12.21.1.1.8
Full path name of file to monitor. If the file already exists then the monitoring starts at the last byte position in the file. If the file is created after the monitoring is enabled then searching for the string is started at the beginning of the file. If no string is specified then a met condition occurs, whenever, the file is modified or its status changes. Status changes are when the user, group, or mode is modified.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorForString		1.3.6.1.4.1.2.6.12.21.1.1.9
String to monitor within a file. The string or pattern can be any limited regular expression (RE) in the style of the ed or egrep command. If the anchor symbols (^ or $) are used in the regular expression then searching is done only when a line is terminated by a new line ( ) character. On Solaris 2.4, regular expressions are not supported.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorActivationState		1.3.6.1.4.1.2.6.12.21.1.1.10
This field indicates whether or not the entry is active in file monitoring. When the file monitor entry is active, it is monitoring the file. When the file monitor entry is inactive, it is not monitoring the file, but will start monitoring when the activation time arrives. The activation state can be inactive only if activation/deactivation days are specified. Otherwise, the activation state is activated when the smSiaFileMonitorState field is set to enabled. If this field is notEnabled, the smSiaFileMonitorState field is not set to enabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(2), notEnabled(1), inactive(3)

smSiaFileMonitorActivationTime		1.3.6.1.4.1.2.6.12.21.1.1.11
This field specifies the time to activate the file monitor (ie. change the activation state from inactive to active). The format should be HH:MM where HH represents the hour (integer between 0 and 23) and MM represents the minute (integer between 0 and 59) to activate the file monitor. A value all blanks will be interpreted as 00:00.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorActivationDayOfWeek		1.3.6.1.4.1.2.6.12.21.1.1.12
This field specifies the days of the week to activate the file monitor at the time specified in the ActivationTime field (ie. change the activation state from inactive to active). The day of the week may be one of three literals: none - Doesn't activate weekdays - Activates file monitor entry on MTWThF all - Activates file monitor entry every day SuMTWThFS Alternatively, the days of the week may be specified as a list of numbers between 0 and 6 (Sunday = 0, Monday = 1, ..., Saturday = 6). The expression '1,3,5' would activate the file monitor entry at the specified time on MWF.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorDeactivationTime		1.3.6.1.4.1.2.6.12.21.1.1.13
This field specifies the time to deactivate the file monitor (ie. change the activation state from active to inactive). The format should be HH:MM where HH represents the hour (integer between 0 and 23) and MM represents the minute (integer between 0 and 59) to deactivate the file monitor. A value of all blanks will be interpreted as 00:00.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorDeactivationDayOfWeek		1.3.6.1.4.1.2.6.12.21.1.1.14
This field specifies the days of the week to deactivate the file monitor at the time specified in the DeactivationTime field (ie. change the activation state from active to inactive). The day of the week may be one of three literals: none - Doesn't deactivate weekdays - Dectivates file monitor entry on MTWThF all - Deactivates file monitor entry every day SuMTWThFS Alternatively, the days of the week may be specified as a list of numbers between 0 and 6 (Sunday = 0, Monday = 1, ..., Saturday = 6). The expression '1,3,5' would deactivate the file monitor entry at the specified time on MWF.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorPollTime		1.3.6.1.4.1.2.6.12.21.1.1.15
File Monitor polling time. Polling units are decimal values appended by the unit: d - day, h - hour, m - minute, or s - second. If no unit is appended, the value is minutes. Multiple values/units are allowed (i.e. 1h45m = 1 hour, 45 minutes). The default poll time is 10 seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorResetToStartOfFile		1.3.6.1.4.1.2.6.12.21.1.1.16
Setting to true causes file monitoring to reset to the beginning of the file. The value of this variable returns to false once the reset has occurred.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	false(1), true(2)

smSiaFileMonitorCurrentLineCountOfFile		1.3.6.1.4.1.2.6.12.21.1.1.17
Current monitoring line count of the file. Line count starts at one.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaFileMonitorFoundStringCount		1.3.6.1.4.1.2.6.12.21.1.1.18
Count of number of times string found within file.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaFileMonitorStringFound		1.3.6.1.4.1.2.6.12.21.1.1.19
String found in the file.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaFileMonitorFoundStringAtLineNumber		1.3.6.1.4.1.2.6.12.21.1.1.20
Line number within file string was found.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaFileMonitorBytePositionWithinLine		1.3.6.1.4.1.2.6.12.21.1.1.21
Character position within line number in which string was found. Character position starts at one.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaFileMonitorCompleteLineStringFound		1.3.6.1.4.1.2.6.12.21.1.1.22
Complete line in which string was found in the file.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaFileMonitorFoundStringBytePositionWithinFile		1.3.6.1.4.1.2.6.12.21.1.1.23
Character position within file in which string was found. Character position starts at one.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaFileMonitorTimeLastFound		1.3.6.1.4.1.2.6.12.21.1.1.24
Time last found. Format is the output of the date command.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaFileMonitorCommandToExecuteTypeMet		1.3.6.1.4.1.2.6.12.21.1.1.25
Command to execute if the type of the file monitor condition is met. This command is run once for each condtion that is met and each time a string is found in the file. Environment variables which are available on file monitor execution are: SM6K_HOSTNAME = {hostname running subagent} SM6K_DOMAIN_NAME = {fully qualified hostname} SM6K_HOST_ADDRESS = {ip address} SM6K_INSTANCE_NAME = {instance string of row} SM6K_INSTANCE_ID = {instance ASCII octet value of row} SM6K_FILE_MONITOR_REASON = File_Monitor_Found_String, File_Monitor_Data_Change, File_Monitor_Status_Change, File_Monitor_Not_Exist, File_Monitor_Exist SM6K_FILE_MONITOR_TYPE = {enumerated value for type} SM6K_FILE_MONITOR_DESCRIPTION = {string from description field} SM6K_FILE_MONITOR_OWNERID = {string from ownerid filed} SM6K_FILE_MONITOR_FULL_PATH_NAME = {file name for monitor} SM6K_FILE_MONITOR_FOR_STRING = {search string} SM6K_FILE_MONITOR_POLL_TIME = {poll time} SM6K_FILE_MONITOR_CURRENT_LINE_COUNT_OF_FILE = {line count} SM6K_FILE_MONITOR_FOUND_STRING_COUNT = {string count found} SM6K_FILE_MONITOR_FOUND_STRING_AT_LINE_NUMBER = {line number found} SM6K_FILE_MONITOR_BYTE_POSITION_WITHIN_LINE = {position in line} SM6K_FILE_MONITOR_COMPLETE_LINE_STRING_FOUND = {complete line} SM6K_FILE_MONITOR_BYTE_POSITION_WITHIN_FILE = {byte count} SM6K_FILE_MONITOR_STRING_FOUND = {string found} SM6K_FILE_MONITOR_TIME_LAST_FOUND = {time last found} SM6K_FILE_MONITOR_SIZE = {size of file} SM6K_FILE_MONITOR_MODE = {mode of file} SM6K_FILE_MONITOR_USERID = {userID of file} SM6K_FILE_MONITOR_GROUPID = {groupID of file} SM6K_FILE_MONITOR_OLD_SIZE = {previous size of file} SM6K_FILE_MONITOR_OLD_MODE = {previous mode of file} SM6K_FILE_MONITOR_OLD_USERID = {previous userID of file} SM6K_FILE_MONITOR_OLD_GROUPID = {previous groupID of file}
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorCommandToExecuteBeforeMonitor		1.3.6.1.4.1.2.6.12.21.1.1.26
Command to execute before monitoring a file for any of the types. This MIB variable can be used to generate the file prior to monitoring it. Environment variables which are available on file monitor execution before monitoring are: SM6K_HOSTNAME = {hostname running subagent} SM6K_DOMAIN_NAME = {fully qualified hostname} SM6K_HOST_ADDRESS = {ip address} SM6K_INSTANCE_NAME = {instance string of row} SM6K_INSTANCE_ID = {instance ASCII octet value of row} SM6K_FILE_MONITOR_REASON = File_Monitor_Before_Monitor SM6K_FILE_MONITOR_TYPE = {enumerated value for type} SM6K_FILE_MONITOR_DESCRIPTION = {string from description field} SM6K_FILE_MONITOR_OWNERID = {string from ownerid filed} SM6K_FILE_MONITOR_FULL_PATH_NAME = {file name for monitor} SM6K_FILE_MONITOR_FOR_STRING = {search string} SM6K_FILE_MONITOR_POLL_TIME = {poll time} SM6K_FILE_MONITOR_CURRENT_LINE_COUNT_OF_FILE = {line count} SM6K_FILE_MONITOR_FOUND_STRING_COUNT = {string count found} SM6K_FILE_MONITOR_FOUND_STRING_AT_LINE_NUMBER = {line number found} SM6K_FILE_MONITOR_BYTE_POSITION_WITHIN_LINE = {position in line} SM6K_FILE_MONITOR_COMPLETE_LINE_STRING_FOUND = {complete line} SM6K_FILE_MONITOR_FOUND_STRING_AT_BYTE_POSITION_WITHIN_FILE = {byte count} SM6K_FILE_MONITOR_STRING_FOUND = {string found} SM6K_FILE_MONITOR_TIME_LAST_FOUND = {time last found} SM6K_FILE_MONITOR_SIZE = {size of file} SM6K_FILE_MONITOR_MODE = {mode of file} SM6K_FILE_MONITOR_USERID = {userID of file} SM6K_FILE_MONITOR_GROUPID = {groupID of file} SM6K_FILE_MONITOR_OLD_SIZE = {previous size of file} SM6K_FILE_MONITOR_OLD_MODE = {previous mode of file} SM6K_FILE_MONITOR_OLD_USERID = {previous userID of file} SM6K_FILE_MONITOR_OLD_GROUPID = {previous groupID of file} This MIB variable can be used to generate the file, modifiy the file or translate the file prior to the search
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorMode		1.3.6.1.4.1.2.6.12.21.1.1.27
File mode for the file. The mode can be modified by setting the three octal digits.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorUserID		1.3.6.1.4.1.2.6.12.21.1.1.28
User ID that owns the file. The user/owner can be modified by setting a new owner/user.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorGroupID		1.3.6.1.4.1.2.6.12.21.1.1.29
Group ID for the file. The group ID can be modified by setting a new group.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

smSiaFileMonitorSize		1.3.6.1.4.1.2.6.12.21.1.1.30
Size of file in bytes. If the size of the file decreases or the file wraps then string searching resets to the first byte of the file.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4294967295

smSiaFileMonitorTimeLastDataModification		1.3.6.1.4.1.2.6.12.21.1.1.31
Time last data modification to file. This is updated when the file data is modified. Format is the output of the date command.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaFileMonitorTimeLastFileStatusChange		1.3.6.1.4.1.2.6.12.21.1.1.32
Time last status change on the file. This is updated when the user, group, or mode is changed. Format is the output of the date command.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

smSiaFileMonitorReturnCode		1.3.6.1.4.1.2.6.12.21.1.1.33
Return code from file monitor operations. The value is zero if successful, non-zero if error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

smSiaFileMonitorMessages		1.3.6.1.4.1.2.6.12.21.1.1.34
Messages from file monitor operations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString