StorageManagement-MIB

File: StorageManagement-MIB.mib (269771 bytes)

Imported modules

RFC-1212 RFC-1215 RFC1155-SMI
RFC1213-MIB

Imported symbols

OBJECT-TYPE TRAP-TYPE enterprises
DisplayString

Defined Types

DellStatus  
INTEGER other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6)    

ChannelEntry  
SEQUENCE    
  channelNumber INTEGER
  channelName DisplayString
  channelState INTEGER
  channelSeverity INTEGER
  channelTermination INTEGER
  channelSCSIID INTEGER
  channelRollUpStatus DellStatus
  channelComponentStatus DellStatus
  channelNexusID DisplayString
  channelDataRate DisplayString
  channelBusType INTEGER

EnclosureEntry  
SEQUENCE    
  enclosureNumber INTEGER
  enclosureName DisplayString
  enclosureVendor DisplayString
  enclosureState INTEGER
  enclosureSeverity INTEGER
  enclosureID DisplayString
  enclosureProcessorVersion DisplayString
  enclosureServiceTag DisplayString
  enclosureAssetTag DisplayString
  enclosureAssetName DisplayString
  enclosureSplitBusPartNumber DisplayString
  enclosureProductID DisplayString
  enclosureKernelVersion DisplayString
  enclosureESM1PartNumber DisplayString
  enclosureESM2PartNumber DisplayString
  enclosureType INTEGER
  enclosureProcessor2Version DisplayString
  enclosureConfig INTEGER
  enclosureChannelNumber INTEGER
  enclosureAlarm INTEGER
  enclosureBackplanePartNumber DisplayString
  enclosureSCSIID INTEGER
  enclosureRollUpStatus DellStatus
  enclosureComponentStatus DellStatus
  enclosureNexusID DisplayString
  enclosureFirmwareVersion DisplayString
  enclosureSCSIRate DisplayString
  enclosurePartNumber DisplayString
  enclosureSerialNumber DisplayString
  enclosureSASAddress DisplayString
  enclosureOccupiedSlotCount INTEGER
  enclosureTotalSlots INTEGER
  enclosureEmptySlotCount INTEGER
  enclosureExpressServiceCode DisplayString

ArrayDiskEntry  
SEQUENCE    
  arrayDiskNumber INTEGER
  arrayDiskName DisplayString
  arrayDiskVendor DisplayString
  arrayDiskState INTEGER
  arrayDiskSeverity INTEGER
  arrayDiskProductID DisplayString
  arrayDiskSerialNo DisplayString
  arrayDiskRevision DisplayString
  arrayDiskEnclosureID DisplayString
  arrayDiskChannel INTEGER
  arrayDiskLengthInMB INTEGER
  arrayDiskLengthInBytes INTEGER
  arrayDiskLargestContiguousFreeSpaceInMB INTEGER
  arrayDiskLargestContiguousFreeSpaceInBytes INTEGER
  arrayDiskTargetID INTEGER
  arrayDiskLunID INTEGER
  arrayDiskUsedSpaceInMB INTEGER
  arrayDiskUsedSpaceInBytes INTEGER
  arrayDiskFreeSpaceInMB INTEGER
  arrayDiskFreeSpaceInBytes INTEGER
  arrayDiskBusType INTEGER
  arrayDiskSpareState INTEGER
  arrayDiskRollUpStatus DellStatus
  arrayDiskComponentStatus DellStatus
  arrayDiskDeviceName DisplayString
  arrayDiskNexusID DisplayString
  arrayDiskPartNumber DisplayString
  arrayDiskSASAddress DisplayString
  arrayDiskNegotiatedSpeed INTEGER
  arrayDiskCapableSpeed INTEGER
  arrayDiskSmartAlertIndication INTEGER
  arrayDiskManufactureDay DisplayString
  arrayDiskManufactureWeek DisplayString
  arrayDiskManufactureYear DisplayString
  arrayDiskMediaType INTEGER
  arrayDiskDellCertified INTEGER
  arrayDiskAltaVendorId DisplayString
  arrayDiskAltaProductId DisplayString
  arrayDiskAltaRevisionId DisplayString
  arrayDiskEncryptionCapable INTEGER
  arrayDiskEncrypted INTEGER
  arrayDiskPowerState INTEGER
  arrayDiskDriveWriteCache INTEGER
  arrayDiskModelNumber DisplayString
  arrayDiskLifeRemaining INTEGER
  arrayDiskDriverVersion DisplayString
  arrayDiskDeviceLifeStatus INTEGER
  arrayDiskReadOnly DisplayString
  arrayDiskRemainingRatedWriteEndurance DisplayString
  arrayDiskSectorSize INTEGER
  arrayDiskPICapable INTEGER
  arrayDiskMaxLinkWidth INTEGER
  arrayDiskNegotiatedLinkWidth INTEGER

ArrayDiskEnclosureConnectionEntry  
SEQUENCE    
  arrayDiskEnclosureConnectionNumber INTEGER
  arrayDiskEnclosureConnectionArrayDiskName DisplayString
  arrayDiskEnclosureConnectionArrayDiskNumber INTEGER
  arrayDiskEnclosureConnectionEnclosureName DisplayString
  arrayDiskEnclosureConnectionEnclosureNumber INTEGER
  arrayDiskEnclosureConnectionControllerName DisplayString
  arrayDiskEnclosureConnectionControllerNumber INTEGER

ArrayDiskChannelConnectionEntry  
SEQUENCE    
  arrayDiskChannelConnectionNumber INTEGER
  arrayDiskChannelConnectionArrayDiskName DisplayString
  arrayDiskChannelConnectionArrayDiskNumber INTEGER
  arrayDiskChannelConnectionChannelName DisplayString
  arrayDiskChannelConnectionChannelNumber INTEGER
  arrayDiskChannelConnectionControllerName DisplayString
  arrayDiskChannelConnectionControllerNumber INTEGER

FanEntry  
SEQUENCE    
  fanNumber INTEGER
  fanName DisplayString
  fanVendor DisplayString
  fanState INTEGER
  fanSeverity INTEGER
  fanProbeUnit DisplayString
  fanProbeMinWarning DisplayString
  fanProbeMinCritical DisplayString
  fanProbeMaxWarning DisplayString
  fanProbeMaxCritical DisplayString
  fanProbeCurrValue DisplayString
  fan1PartNumber DisplayString
  fan2PartNumber DisplayString
  fanRollUpStatus DellStatus
  fanComponentStatus DellStatus
  fanNexusID DisplayString
  fanRevision DisplayString

FanConnectionEntry  
SEQUENCE    
  fanConnectionNumber INTEGER
  fanConnectionFanName DisplayString
  fanConnectionFanNumber INTEGER
  fanConnectionEnclosureName DisplayString
  fanConnectionEnclosureNumber INTEGER

PowerSupplyEntry  
SEQUENCE    
  powerSupplyNumber INTEGER
  powerSupplyName DisplayString
  powerSupplyVendor DisplayString
  powerSupplyState INTEGER
  powerSupplySeverity INTEGER
  powerSupply1PartNumber DisplayString
  powerSupply2PartNumber DisplayString
  powerSupplyRollUpStatus DellStatus
  powerSupplyComponentStatus DellStatus
  powerSupplyNexusID DisplayString
  powerSupplyRevision DisplayString

PowerSupplyConnectionEntry  
SEQUENCE    
  powerSupplyConnectionNumber INTEGER
  powerSupplyConnectionPowersupplyName DisplayString
  powerSupplyConnectionPowersupplyNumber INTEGER
  powerSupplyConnectionEnclosureName DisplayString
  powerSupplyConnectionEnclosureNumber INTEGER
  powerSupplyConnectionFirmwareVersion DisplayString

TemperatureProbeEntry  
SEQUENCE    
  temperatureProbeNumber INTEGER
  temperatureProbeName DisplayString
  temperatureProbeVendor DisplayString
  temperatureProbeState INTEGER
  temperatureProbeSeverity INTEGER
  temperatureProbeUnit DisplayString
  temperatureProbeMinWarning INTEGER
  temperatureProbeMinCritical INTEGER
  temperatureProbeMaxWarning INTEGER
  temperatureProbeMaxCritical INTEGER
  temperatureProbeCurValue INTEGER
  temperatureProbeRollUpStatus DellStatus
  temperatureProbeComponentStatus DellStatus
  temperatureProbeNexusID DisplayString

TemperatureConnectionEntry  
SEQUENCE    
  temperatureConnectionNumber INTEGER
  temperatureConnectionTemperatureName DisplayString
  temperatureConnectionTemperatureNumber INTEGER
  temperatureConnectionEnclosureName DisplayString
  temperatureConnectionEnclosureNumber INTEGER

EnclosureManagementModuleEntry  
SEQUENCE    
  enclosureManagementModuleNumber INTEGER
  enclosureManagementModuleName DisplayString
  enclosureManagementModuleVendor DisplayString
  enclosureManagementModuleState INTEGER
  enclosureManagementModuleSeverity INTEGER
  enclosureManagementModulePartNumber DisplayString
  enclosureManagementModuleType INTEGER
  enclosureManagementModuleFWVersion DisplayString
  enclosureManagementModuleMaxSpeed DisplayString
  enclosureManagementModuleRollUpStatus DellStatus
  enclosureManagementModuleComponentStatus DellStatus
  enclosureManagementModuleNexusID DisplayString
  enclosureManagementModuleRevision DisplayString

EnclosureManagementModuleConnectionEntry  
SEQUENCE    
  enclosureManagementModuleConnectionNumber INTEGER
  enclosureManagementModuleConnectionEMMName DisplayString
  enclosureManagementModuleConnectionEMMNumber INTEGER
  enclosureManagementModuleConnectionEnclosureName DisplayString
  enclosureManagementModuleConnectionEnclosureNumber INTEGER

BatteryEntry  
SEQUENCE    
  batteryNumber INTEGER
  batteryName DisplayString
  batteryVendor DisplayString
  batteryState INTEGER
  batteryRollUpStatus DellStatus
  batteryComponentStatus DellStatus
  batteryChargeCount INTEGER
  batteryMaxChargeCount INTEGER
  batteryNexusID DisplayString
  batteryPredictedCapacity INTEGER
  batteryNextLearnTime INTEGER
  batteryLearnState INTEGER
  batteryID INTEGER
  batteryMaxLearnDelay INTEGER
  batteryLearnMode INTEGER

BatteryConnectionEntry  
SEQUENCE    
  batteryConnectionNumber INTEGER
  batteryConnectionBatteryName DisplayString
  batteryConnectionBatteryNumber INTEGER
  batteryConnectionControllerName DisplayString
  batteryConnectionControllerNumber INTEGER

ControllerEntry  
SEQUENCE    
  controllerNumber INTEGER
  controllerName DisplayString
  controllerVendor DisplayString
  controllerType INTEGER
  controllerState INTEGER
  controllerSeverity INTEGER
  controllerRebuildRateInPercent INTEGER
  controllerFWVersion DisplayString
  controllerCacheSizeInMB INTEGER
  controllerCacheSizeInBytes INTEGER
  controllerPhysicalDeviceCount INTEGER
  controllerLogicalDeviceCount INTEGER
  controllerPartnerStatus DisplayString
  controllerHostPortCount INTEGER
  controllerMemorySizeInMB INTEGER
  controllerMemorySizeInBytes INTEGER
  controllerDriveChannelCount INTEGER
  controllerFaultTolerant INTEGER
  controllerC0Port0WWN DisplayString
  controllerC0Port0Name DisplayString
  controllerC0Port0ID INTEGER
  controllerC0Target INTEGER
  controllerC0Channel INTEGER
  controllerC0OSController DisplayString
  controllerC0BatteryState INTEGER
  controllerC1Port0WWN DisplayString
  controllerC1Port0Name DisplayString
  controllerC1Port0ID INTEGER
  controllerC1Target INTEGER
  controllerC1Channel INTEGER
  controllerC1OSController INTEGER
  controllerC1BatteryState INTEGER
  controllerNodeWWN DisplayString
  controllerC0Port1WWN DisplayString
  controllerC1Port1WWN DisplayString
  controllerBatteryChargeCount INTEGER
  controllerRollUpStatus DellStatus
  controllerComponentStatus DellStatus
  controllerNexusID DisplayString
  controllerAlarmState INTEGER
  controllerDriverVersion DisplayString
  controllerPCISlot DisplayString
  controllerClusterMode INTEGER
  controllerMinFWVersion DisplayString
  controllerMinDriverVersion DisplayString
  controllerSCSIInitiatorID INTEGER
  controllerChannelCount INTEGER
  controllerReconstructRate INTEGER
  controllerPatrolReadRate INTEGER
  controllerBGIRate INTEGER
  controllerCheckConsistencyRate INTEGER
  controllerPatrolReadMode INTEGER
  controllerPatrolReadState INTEGER
  controllerPatrolReadIterations INTEGER
  controllerStorportDriverVersion DisplayString
  controllerMinRequiredStorportVer DisplayString
  controllerEncryptionCapable INTEGER
  controllerEncryptionKeyPresent INTEGER
  controllerPersistentHotSpare INTEGER
  controllerSpinDownUnconfiguredDrives INTEGER
  controllerSpinDownHotSpareDrives INTEGER
  controllerSpinDownTimeInterval INTEGER
  controllerEncryptionMode INTEGER
  controllerCacheCade INTEGER
  controllerSpinDownConfiguredDrives INTEGER
  controllerAutomaticPowerSaving INTEGER
  controllerConfiguredDrivesSpinUpTime DisplayString
  controllerConfiguredDrivesSpinUpTimeInterval INTEGER
  controllerPreservedCache INTEGER
  controllerPIEnable INTEGER
  controllerCurrentMode DisplayString
  frontChassisSlot INTEGER
  controllerInstance INTEGER

TapeDriveEntry  
SEQUENCE    
  tapeDriveNumber INTEGER
  tapeDriveName DisplayString
  tapeDriveVendor DisplayString
  tapeDriveProductID DisplayString
  tapeDriveNexusID DisplayString
  tapeDriveBusType INTEGER
  tapeDriveSASAddress DisplayString
  tapeDriveMediaType INTEGER

NvmeAdapterEntry  
SEQUENCE    
  nvmeAdapterNumber INTEGER
  nvmeAdapterState INTEGER
  nvmeAdapterControllerNum INTEGER
  nvmeAdapterPCISlot INTEGER
  nvmeAdapterDeviceName DisplayString
  nvmeAdapterVendor DisplayString
  nvmeAdapterProductID DisplayString
  nvmeAdapterSerialNumber DisplayString
  nvmeAdapterRevision DisplayString
  nvmeAdapterDriverVersion DisplayString
  nvmeAdapterPCIBusNo INTEGER
  nvmeAdapterPCIDeviceNum INTEGER
  nvmeAdapterPCIFuncNum INTEGER
  nvmeAdapterNexusID DisplayString
  nvmeAdapterBusProtocolType INTEGER
  nvmeAdapterMediaType INTEGER
  nvmeAdapterLengthInMegaBytes INTEGER
  nvmeAdapterLengthOffsetBytes INTEGER
  nvmeAdapterDeviceID INTEGER
  nvmeAdapterModelNumber DisplayString
  nvmeAdapterNegotiatedSpeed INTEGER
  nvmeAdapterCapableSpeed INTEGER
  nvmeAdapterRemainingRatedWrEnd INTEGER
  nvmeAdapterFormFactor INTEGER
  nvmeAdapterSupportedSpec DisplayString
  nvmeAdapterMaxLinkWidth INTEGER
  nvmeAdapterNegotiatedLinkWidth INTEGER
  nvmeAdapterSubVendor DisplayString

ArrayDiskLogicalConnectionEntry  
SEQUENCE    
  arrayDiskLogicalConnectionNumber INTEGER
  arrayDiskLogicalConnectionArrayDiskName DisplayString
  arrayDiskLogicalConnectionArrayDiskNumber INTEGER
  arrayDiskLogicalConnectionVirtualDiskName DisplayString
  arrayDiskLogicalConnectionVirtualDiskNumber INTEGER
  arrayDiskLogicalConnectionDiskName DisplayString
  arrayDiskLogicalConnectionDiskNumber INTEGER

VirtualDiskEntry  
SEQUENCE    
  virtualDiskNumber INTEGER
  virtualDiskName DisplayString
  virtualDiskDeviceName DisplayString
  virtualDiskState INTEGER
  virtualDiskSeverity INTEGER
  virtualDiskLengthInMB INTEGER
  virtualDiskLengthInBytes INTEGER
  virtualDiskFreeSpaceInMB INTEGER
  virtualDiskFreeSpaceInBytes INTEGER
  virtualDiskWritePolicy INTEGER
  virtualDiskReadPolicy INTEGER
  virtualDiskCachePolicy INTEGER
  virtualDiskLayout INTEGER
  virtualDiskCurStripeSizeInMB INTEGER
  virtualDiskCurStripeSizeInBytes INTEGER
  virtualDiskChannel INTEGER
  virtualDiskTargetID INTEGER
  virtualDiskLunID INTEGER
  virtualDiskRollUpStatus DellStatus
  virtualDiskComponentStatus DellStatus
  virtualDiskNexusID DisplayString
  virtualDiskArrayDiskType INTEGER
  virtualDiskBadBlocksDetected INTEGER
  virtualDiskEncrypted INTEGER
  virtualDiskIsCacheCade INTEGER
  virtualDiskDiskCachePolicy INTEGER
  virtualDiskAssociatedFluidCacheStatus INTEGER
  virtualDiskPIEnable INTEGER

VirtualDiskPartitionEntry  
SEQUENCE    
  virtualDiskPartitionNumber INTEGER
  virtualDiskPartitionDeviceName OCTET STRING
  virtualDiskPartitionState INTEGER
  virtualDiskPartitionSize INTEGER
  virtualDiskPartitionFluidCacheStatus OCTET STRING
  virtualDiskPartitionNexusID DisplayString

FluidCacheEntry  
SEQUENCE    
  fluidCacheNumber INTEGER
  fluidCacheName OCTET STRING
  fluidCacheLicenseState OCTET STRING
  fluidCacheLicenseValidity INTEGER
  fluidCacheLicenseEntitlementID OCTET STRING
  fluidCacheLicenseDuration OCTET STRING
  fluidCacheLicenseCapacity OCTET STRING
  fluidCacheLicenseRemaining OCTET STRING
  fluidCacheLicenseType OCTET STRING
  fluidCacheLicenseVendor OCTET STRING
  fluidCacheLicenseProductId OCTET STRING
  fluidCacheLicenseDateSold OCTET STRING
  fluidCacheLicenseGeneration OCTET STRING
  fluidCacheLicenseFeatureID OCTET STRING
  fluidCacheLicenseFeatureDescription OCTET STRING
  fluidCacheNexus OCTET STRING

FluidCacheDiskEntry  
SEQUENCE    
  fluidCacheDiskNumber INTEGER
  fluidCacheDiskName OCTET STRING
  fluidCacheDiskState INTEGER
  fluidCacheDiskBackendDeviceType INTEGER
  fluidCacheDiskBackendDeviceName OCTET STRING
  fluidCacheDiskBackendDeviceSize INTEGER
  fluidCacheDiskOperatingMode INTEGER
  fluidCacheDiskConfiguredMode INTEGER
  fluidCacheDiskNexus OCTET STRING
  fluidCacheDiskStatus INTEGER

FluidCachePoolEntry  
SEQUENCE    
  fluidCachePoolNumber INTEGER
  fluidCachePoolStoreCount INTEGER
  fluidCachePoolUUID OCTET STRING
  fluidCachePoolLicenseState DisplayString
  fluidCachePoolSize INTEGER
  fluidCachePoolHighAvailabilityState OCTET STRING
  fluidCachePoolNexus OCTET STRING
  fluidCachePoolStatus INTEGER

Defined Values

dell 1.3.6.1.4.1.674
OBJECT IDENTIFIER    

storage 1.3.6.1.4.1.674.10893
OBJECT IDENTIFIER    

software 1.3.6.1.4.1.674.10893.1
OBJECT IDENTIFIER    

storageManagement 1.3.6.1.4.1.674.10893.1.20
OBJECT IDENTIFIER    

softwareVersion 1.3.6.1.4.1.674.10893.1.20.1
Version number of the storage management component of the systems management software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

globalStatus 1.3.6.1.4.1.674.10893.1.20.2
Global health information for the subsystem managed by the Storage Management software. This global status is customized for HP OpenView. Other applications should refer to the agentSystemGlobalStatus entry in the globalData object group. Possible values: 1: Critical 2: Warning 3: Normal 4: Unknown
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER critical(1), warning(2), normal(3), unknown(4)  

softwareManufacturer 1.3.6.1.4.1.674.10893.1.20.3
Manufacturer information for the Storage Management software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

softwareProduct 1.3.6.1.4.1.674.10893.1.20.4
Product information for the Storage Management software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

softwareDescription 1.3.6.1.4.1.674.10893.1.20.5
Product Description for the Storage Management software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..128)  

storageManagementInfo 1.3.6.1.4.1.674.10893.1.20.100
OBJECT IDENTIFIER    

displayName 1.3.6.1.4.1.674.10893.1.20.100.1
Name of this management software for display purposes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

description 1.3.6.1.4.1.674.10893.1.20.100.2
A short description of this management software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVendor 1.3.6.1.4.1.674.10893.1.20.100.3
The name of the management software manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVersion 1.3.6.1.4.1.674.10893.1.20.100.4
This entry is obsolete. Refer to softwareVersion.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

globalData 1.3.6.1.4.1.674.10893.1.20.110
OBJECT IDENTIFIER    

agentSystemGlobalStatus 1.3.6.1.4.1.674.10893.1.20.110.1
This entry is obsolete. Please use the value: agentGlobalSystemStatus. Note: Enumerated values have changed.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), warning(2), nonCriticalError(3), failure(4), unknown(5)  

agentLastGlobalStatus 1.3.6.1.4.1.674.10893.1.20.110.2
This entry is obsolete. Please use the value: agentLastGlobalSystemStatus. Note: Enumerated values have changed.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), warning(2), nonCriticalError(3), failure(4), unknown(5)  

agentTimeStamp 1.3.6.1.4.1.674.10893.1.20.110.3
The last time that the agent values have been updated. Universal time in sec since UTC 1/1/70.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agentGetTimeout 1.3.6.1.4.1.674.10893.1.20.110.4
Suggested timeout value in milliseconds for how long the SNMP getter should wait while attempting to poll the SNMP agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10000  

agentModifiers 1.3.6.1.4.1.674.10893.1.20.110.5
Agent functional modifiers, when set the modifier is active. Bit definitions: Bit 3: agent in debug mode. All other bits are product specific
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10000  

agentRefreshRate 1.3.6.1.4.1.674.10893.1.20.110.6
The rate, given in seconds, at which the cached data for SNMP is refreshed. The default value is 300 seconds, or 5 minutes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10000  

agentHostname 1.3.6.1.4.1.674.10893.1.20.110.7
This entry is obsolete for Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

agentIPAddress 1.3.6.1.4.1.674.10893.1.20.110.8
This entry is obsolete for Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

agentSoftwareStatus 1.3.6.1.4.1.674.10893.1.20.110.9
This entry is obsolete for Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER databaseUp(1), databaseDown(2)  

agentSnmpVersion 1.3.6.1.4.1.674.10893.1.20.110.10
This entry is obsolete. Refer to softwareVersion.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

agentMibVersion 1.3.6.1.4.1.674.10893.1.20.110.11
Version of the Storage Management MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

agentManagementSoftwareURLName 1.3.6.1.4.1.674.10893.1.20.110.12
The Universal Resource Locator (URL) of the systems management software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

agentGlobalSystemStatus 1.3.6.1.4.1.674.10893.1.20.110.13
Global health information for the subsystem managed by the Storage Management software. This global status should be used by applications other than HP OpenView. HP OpenView should refer to the globalStatus in the root level object group. This is a rollup for the entire agent including any monitored devices. The status is intended to give initiative to a snmp monitor to get further data when this status is abnormal. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

agentLastGlobalSystemStatus 1.3.6.1.4.1.674.10893.1.20.110.14
The previous global status of the system managed by the Storage Management software. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

agentSmartThermalShutdown 1.3.6.1.4.1.674.10893.1.20.110.15
Indicates the status of smart thermal shutdown for PV220S and PV221S enclosures. Possible values: 1: Enabled 2: Disabled
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

physicalDevices 1.3.6.1.4.1.674.10893.1.20.130
OBJECT IDENTIFIER    

channelTable 1.3.6.1.4.1.674.10893.1.20.130.2
A table of controller channels. The number of entries is related to the number of channels supported by a RAID controller. Perc2 RAID controller supports a max of 4 channels per controller. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ChannelEntry

channelEntry 1.3.6.1.4.1.674.10893.1.20.130.2.1
An entry in the channel table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ChannelEntry  

channelNumber 1.3.6.1.4.1.674.10893.1.20.130.2.1.1
Instance number of this channel entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

channelName 1.3.6.1.4.1.674.10893.1.20.130.2.1.2
The name of the channel as represented in Storage Management. The name will include the word channel and the instance. For example: Channel 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

channelState 1.3.6.1.4.1.674.10893.1.20.130.2.1.3
The current condition of the channel. Possible states: 0: Unknown 1: Ready - The I/O has resumed. 2: Failed 3: Online 4: Offline - The I/O has paused. 6: Degraded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6)  

channelSeverity 1.3.6.1.4.1.674.10893.1.20.130.2.1.4
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

channelTermination 1.3.6.1.4.1.674.10893.1.20.130.2.1.5
The type of SCSI termination on this channel. Termination is required for proper operation of this channel. 1: Wide Termination (16 bit) 2: Narrow Termination (8 bit) 3: Not Terminated
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER wide(1), narrow(2), notTerminated(3)  

channelSCSIID 1.3.6.1.4.1.674.10893.1.20.130.2.1.6
The SCSI ID of the controller to which the channel belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

channelRollUpStatus 1.3.6.1.4.1.674.10893.1.20.130.2.1.7
Severity of the channel state. This is the combined status of the channel and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

channelComponentStatus 1.3.6.1.4.1.674.10893.1.20.130.2.1.8
The status of the channel itself with out without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

channelNexusID 1.3.6.1.4.1.674.10893.1.20.130.2.1.9
Durable unique ID for this channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

channelDataRate 1.3.6.1.4.1.674.10893.1.20.130.2.1.10
The data rate (SCSI speed) of the channel. Example: Ultra 320M SCSI
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

channelBusType 1.3.6.1.4.1.674.10893.1.20.130.2.1.11
The bus type of the channel. Possible values: 1: SCSI 2: IDE 3: Fibre Channel 4: SSA 6: USB 7: SATA 8: SAS 9: PCIe
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER scsi(1), ide(2), fibreChannel(3), ssa(4), usb(6), sata(7), sas(8), pcie(9)  

enclosureTable 1.3.6.1.4.1.674.10893.1.20.130.3
A table of managed Enclosures. The number of entries is related to number of enclosures discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosureEntry

enclosureEntry 1.3.6.1.4.1.674.10893.1.20.130.3.1
An entry in the Enclosure table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EnclosureEntry  

enclosureNumber 1.3.6.1.4.1.674.10893.1.20.130.3.1.1
Instance number of the enclosure entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

enclosureName 1.3.6.1.4.1.674.10893.1.20.130.3.1.2
The enclosure's name as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureVendor 1.3.6.1.4.1.674.10893.1.20.130.3.1.3
The enclosure's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureState 1.3.6.1.4.1.674.10893.1.20.130.3.1.4
The current condition of the enclosure (which includes any devices connected to it.) Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6)  

enclosureSeverity 1.3.6.1.4.1.674.10893.1.20.130.3.1.5
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

enclosureID 1.3.6.1.4.1.674.10893.1.20.130.3.1.6
Represents unique id for an enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureProcessorVersion 1.3.6.1.4.1.674.10893.1.20.130.3.1.7
This entry is obsolete for Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureServiceTag 1.3.6.1.4.1.674.10893.1.20.130.3.1.8
Enclosure identification used when consulting customer support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureAssetTag 1.3.6.1.4.1.674.10893.1.20.130.3.1.9
User definable asset tag for the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureAssetName 1.3.6.1.4.1.674.10893.1.20.130.3.1.10
User definable asset name of the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureSplitBusPartNumber 1.3.6.1.4.1.674.10893.1.20.130.3.1.11
The enclosure's split bus part number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureProductID 1.3.6.1.4.1.674.10893.1.20.130.3.1.12
The enclosure's product identification. This also corresponds to the enclosure type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureKernelVersion 1.3.6.1.4.1.674.10893.1.20.130.3.1.13
This entry is obsolete for Storage Management. Refer to enclosureFirmwareVersion for the firmware version of the enclosure.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureESM1PartNumber 1.3.6.1.4.1.674.10893.1.20.130.3.1.14
This entry is obsolete for Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureESM2PartNumber 1.3.6.1.4.1.674.10893.1.20.130.3.1.15
This entry is obsolete for Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureType 1.3.6.1.4.1.674.10893.1.20.130.3.1.16
The type of this enclosure. Possible values: 1: Internal 2: Dell PV200S (PV201S) 3: Dell PV210S (PV211S) 4: Dell PV220S (PV221S) 5: Dell PV660F 6: Dell PV224F 7: Dell PV660F / PV224F 8: Dell MD1000 9: Dell MD1120 10: Dell MD1200 11: Dell MD1220
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), dELLPV200SPV201S(2), dELLPV210SPV211S(3), dELLPV220SPV221S(4), dELLPV660F(5), dELLPV224F(6), dELLPV660F224F(7), md1000(8), md1120(9), md1200(10), md1220(11)  

enclosureProcessor2Version 1.3.6.1.4.1.674.10893.1.20.130.3.1.17
This entry is obsolete for Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureConfig 1.3.6.1.4.1.674.10893.1.20.130.3.1.18
The current configuration of the enclosure's backplane. Possible values: 1: Joined 2: Split Bus 3: Clustered 4: Unified
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER joined(1), splitBus(2), clustered(3), unified(4)  

enclosureChannelNumber 1.3.6.1.4.1.674.10893.1.20.130.3.1.19
The channel number, or bus, to which the enclosure is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureAlarm 1.3.6.1.4.1.674.10893.1.20.130.3.1.20
The current status of the enclosure's alarm (PV220S, and PV221S only.) Possible values: 1: Disabled 2: Enabled
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

enclosureBackplanePartNumber 1.3.6.1.4.1.674.10893.1.20.130.3.1.21
The part number of the enclosure's backplane.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureSCSIID 1.3.6.1.4.1.674.10893.1.20.130.3.1.22
The SCSI ID of the controller to which this enclosure is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureRollUpStatus 1.3.6.1.4.1.674.10893.1.20.130.3.1.23
Severity of the enclosure state. This is the combined status of the enclosure and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

enclosureComponentStatus 1.3.6.1.4.1.674.10893.1.20.130.3.1.24
The status of the enclosure itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

enclosureNexusID 1.3.6.1.4.1.674.10893.1.20.130.3.1.25
Durable unique ID for this enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureFirmwareVersion 1.3.6.1.4.1.674.10893.1.20.130.3.1.26
The firmware version of the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureSCSIRate 1.3.6.1.4.1.674.10893.1.20.130.3.1.27
Actual SCSI rate in the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosurePartNumber 1.3.6.1.4.1.674.10893.1.20.130.3.1.28
The part number of the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureSerialNumber 1.3.6.1.4.1.674.10893.1.20.130.3.1.29
Serial number of the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureSASAddress 1.3.6.1.4.1.674.10893.1.20.130.3.1.30
The specified SAS address if this is a SAS enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureOccupiedSlotCount 1.3.6.1.4.1.674.10893.1.20.130.3.1.31
Shows the number of physical disk slots occupied in a storage enclosure. Note: A value of 9999 indicates feature not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureTotalSlots 1.3.6.1.4.1.674.10893.1.20.130.3.1.32
Shows the total number of physical slots in a storage enclosure; it includes total count of occupied and empty slots. Note: A value of 9999 indicates feature not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureEmptySlotCount 1.3.6.1.4.1.674.10893.1.20.130.3.1.33
Shows the number of empty physical disk slots in a storage enclosure. Note: A value of 9999 indicates feature not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureExpressServiceCode 1.3.6.1.4.1.674.10893.1.20.130.3.1.34
Express Service Code (ESC) is base10 converted numerical value of service tag.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskTable 1.3.6.1.4.1.674.10893.1.20.130.4
A table of managed Array Disks. The number of entries is related to number of Array Disks discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArrayDiskEntry

arrayDiskEntry 1.3.6.1.4.1.674.10893.1.20.130.4.1
An entry in the Array Disk table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArrayDiskEntry  

arrayDiskNumber 1.3.6.1.4.1.674.10893.1.20.130.4.1.1
Instance number of this array disk entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

arrayDiskName 1.3.6.1.4.1.674.10893.1.20.130.4.1.2
The name of the array disk as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskVendor 1.3.6.1.4.1.674.10893.1.20.130.4.1.3
The array disk's manufacturer's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskState 1.3.6.1.4.1.674.10893.1.20.130.4.1.4
The current condition of the array disk. Possible states: 0: Unknown 1: Ready - Available for use, but no RAID configuration has been assigned. 2: Failed - Not operational. 3: Online - Operational. RAID configuration has been assigned. 4: Offline - The drive is not available to the RAID controller. 6: Degraded - Refers to a fault-tolerant array/virtual disk that has a failed disk. 7: Recovering - Refers to state of recovering from bad blocks on disks. 11: Removed - Indicates that array disk has been removed. 13: Non-RAID - Indicates that array disk is not a RAID capable disk 14: Not Ready - Applicable for PCIeSSD devices indicating that the device is in locked state 15: Resynching - Indicates one of the following types of disk operations: Transform Type, Reconfiguration, and Check Consistency. 22: Replacing - Indicates copyback operation is in progress. 23: Spinning Down - Transit state when the physical disk is spinning down for physical disk power management. 24: Rebuild 25: No Media - CD-ROM or removable disk has no media. 26: Formatting - In the process of formatting. 28: Diagnostics - Diagnostics are running. 34: Predictive failure 35: Initializing: Applies only to virtual disks on PERC, PERC 2/SC, and PERC 2/DC controllers. 39: Foreign 40: Clear 41: Unsupported 53: Incompatible 56: Read Only - Applicable for PCIeSSD devices. Indicates that device has reached read-only state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6), recovering(7), removed(11), non-raid(13), notReady(14), resynching(15), replacing(22), spinningDown(23), rebuild(24), noMedia(25), formatting(26), diagnostics(28), predictiveFailure(34), initializing(35), foreign(39), clear(40), unsupported(41), incompatible(53), readOnly(56)  

arrayDiskSeverity 1.3.6.1.4.1.674.10893.1.20.130.4.1.5
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

arrayDiskProductID 1.3.6.1.4.1.674.10893.1.20.130.4.1.6
The model number of the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskSerialNo 1.3.6.1.4.1.674.10893.1.20.130.4.1.7
The array disk's unique identification number from the manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskRevision 1.3.6.1.4.1.674.10893.1.20.130.4.1.8
The firmware version of the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskEnclosureID 1.3.6.1.4.1.674.10893.1.20.130.4.1.9
The SCSI ID of the enclosure processor to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskChannel 1.3.6.1.4.1.674.10893.1.20.130.4.1.10
The bus to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLengthInMB 1.3.6.1.4.1.674.10893.1.20.130.4.1.11
The size in megabytes of the array disk. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLengthInBytes 1.3.6.1.4.1.674.10893.1.20.130.4.1.12
The size of the array disk in bytes that is less than a megabyte. This size plus the arrayDiskLengthInMB is the total size of the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLargestContiguousFreeSpaceInMB 1.3.6.1.4.1.674.10893.1.20.130.4.1.13
The size in megabytes of the largest contiguous free space on the array disk. If this size is 0, it is less than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLargestContiguousFreeSpaceInBytes 1.3.6.1.4.1.674.10893.1.20.130.4.1.14
The size of the largest contiguous free space on this array disk in bytes that is less than a megabyte. This size plus the arrayDiskLargestContiguousFreeSpaceInMB is the total size of the largest contiguous free space on the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskTargetID 1.3.6.1.4.1.674.10893.1.20.130.4.1.15
The SCSI target ID which this array disk is assigned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

arrayDiskLunID 1.3.6.1.4.1.674.10893.1.20.130.4.1.16
The array disk's logical unit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskUsedSpaceInMB 1.3.6.1.4.1.674.10893.1.20.130.4.1.17
The amount in megabytes of the used space on the array disk. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskUsedSpaceInBytes 1.3.6.1.4.1.674.10893.1.20.130.4.1.18
The size in bytes of the used space on the array disk that is smaller than a megabyte. This size plus the arrayDiskUsedSpaceInMB is the total amount of used space on the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskFreeSpaceInMB 1.3.6.1.4.1.674.10893.1.20.130.4.1.19
The amount in megabytes of the free space on the array disk. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskFreeSpaceInBytes 1.3.6.1.4.1.674.10893.1.20.130.4.1.20
The size in bytes of the free space on the array disk that is smaller than a megabyte. This size plus the arrayDiskFreeSpaceInMB is the total amount of free space on the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskBusType 1.3.6.1.4.1.674.10893.1.20.130.4.1.21
The bus type of the array disk. Possible values: 1: SCSI 2: IDE 3: Fibre Channel 4: SSA 6: USB 7: SATA 8: SAS 9: PCIe
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER scsi(1), ide(2), fibre(3), ssa(4), usb(6), sata(7), sas(8), pcie(9)  

arrayDiskSpareState 1.3.6.1.4.1.674.10893.1.20.130.4.1.22
The status of the array disk as a spare. Possible states: 1 : disk is a member of a virtual disk 2 : disk is a member of a disk group 3 : disk is a global hot spare 4 : disk is a dedicated hot spare 5 : not a spare 99: not applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER memberVD(1), memberDG(2), globalHotSpare(3), dedicatedHotSpare(4), notASpare(5), notApplicable(99)  

arrayDiskRollUpStatus 1.3.6.1.4.1.674.10893.1.20.130.4.1.23
Severity of the array disk state. This is the combined status of the array disk and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

arrayDiskComponentStatus 1.3.6.1.4.1.674.10893.1.20.130.4.1.24
The status of the array disk itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

arrayDiskDeviceName 1.3.6.1.4.1.674.10893.1.20.130.4.1.25
The operating system device name for this disk. This property is only applicable to array disks attached to a RAID controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskNexusID 1.3.6.1.4.1.674.10893.1.20.130.4.1.26
Durable unique ID for this array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskPartNumber 1.3.6.1.4.1.674.10893.1.20.130.4.1.27
The part number of the disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskSASAddress 1.3.6.1.4.1.674.10893.1.20.130.4.1.28
The specified SAS address if this is a SAS disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskNegotiatedSpeed 1.3.6.1.4.1.674.10893.1.20.130.4.1.29
The speed at which the drive is actually running in MPS (megabytes per second).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskCapableSpeed 1.3.6.1.4.1.674.10893.1.20.130.4.1.30
The maximum speed at which the drive is capable of negotiating in MPS (megabytes per second).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskSmartAlertIndication 1.3.6.1.4.1.674.10893.1.20.130.4.1.31
Indicated whether the disk has received a predictive failure. Possible values: 1: No - disk has not received a predictive failure alert 2: Yes - disk has received a predictive failure alert
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

arrayDiskManufactureDay 1.3.6.1.4.1.674.10893.1.20.130.4.1.32
The day of the week (1=Sunday thru 7=Saturday) on which this disk was manufactured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskManufactureWeek 1.3.6.1.4.1.674.10893.1.20.130.4.1.33
The week (1 thru 53) in which this disk was manufactured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskManufactureYear 1.3.6.1.4.1.674.10893.1.20.130.4.1.34
The four digit year in which this disk was manufactured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskMediaType 1.3.6.1.4.1.674.10893.1.20.130.4.1.35
The Media type of the array disk. Possible Values: 1:unknown 2:hdd 3:ssd
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), hdd(2), ssd(3)  

arrayDiskDellCertified 1.3.6.1.4.1.674.10893.1.20.130.4.1.36
Indicates if array disk is certified by Dell. Value: 1 - Certified, 0 - Not Certified, 99 - Unknown
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskAltaVendorId 1.3.6.1.4.1.674.10893.1.20.130.4.1.37
Provides vendor information for Alta interposer.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskAltaProductId 1.3.6.1.4.1.674.10893.1.20.130.4.1.38
Provides product id for Alta interposer.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskAltaRevisionId 1.3.6.1.4.1.674.10893.1.20.130.4.1.39
Provides revision id for Alta interposer.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskEncryptionCapable 1.3.6.1.4.1.674.10893.1.20.130.4.1.40
Indicates if physical disk is Encryption capable. Value: 1 - Capable, 0 - Not Capable, 99 - Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskEncrypted 1.3.6.1.4.1.674.10893.1.20.130.4.1.41
Indicates if the physical disk has encryption enabled. Value: 1 - Yes, 0 - No, 99 - Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskPowerState 1.3.6.1.4.1.674.10893.1.20.130.4.1.42
Indicates power state of a physical drive. Value: 0 - Spun up, 1- Spun down, 255 - Transition, 99 - Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskDriveWriteCache 1.3.6.1.4.1.674.10893.1.20.130.4.1.43
Indicates drive write cache capability for PCIe SSD devices. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined/Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskModelNumber 1.3.6.1.4.1.674.10893.1.20.130.4.1.44
Provides PCIe SSD device model number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskLifeRemaining 1.3.6.1.4.1.674.10893.1.20.130.4.1.45
Provides PCIe SSD device life remaining in percentage. Value: 0..100, 999 - Undetermined/Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

arrayDiskDriverVersion 1.3.6.1.4.1.674.10893.1.20.130.4.1.46
Provides PCIe SSD device driver version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskDeviceLifeStatus 1.3.6.1.4.1.674.10893.1.20.130.4.1.47
Provides PCIe SSD device life status. Possible Values: -1: Not Available / Not Applicable 1: Drive Health Good 2: Approaching Warranty Coverage Expiry 3: Warranty Coverage Expired 4: Approaching Read Only 5: Read Only
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskReadOnly 1.3.6.1.4.1.674.10893.1.20.130.4.1.48
Provides PCIe SSD's Read Only attribute. Possible Values: Yes, No, Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskRemainingRatedWriteEndurance 1.3.6.1.4.1.674.10893.1.20.130.4.1.49
Provides PCIe SSD device Remaining Rated Write Endurance Possible Values: 0-100% ,Not Available/Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskSectorSize 1.3.6.1.4.1.674.10893.1.20.130.4.1.50
Provides the information regarding sector size of array disk. Possible values are: 512 or 4096.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskPICapable 1.3.6.1.4.1.674.10893.1.20.130.4.1.51
Provides the information regarding T10 PI capability of Array disk. Possible values are: 0 (T10 PI incapable) or 1 (T10 PI capable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskMaxLinkWidth 1.3.6.1.4.1.674.10893.1.20.130.4.1.52
Provides the information regarding Max Link Width of Array disk. Possible values are: 0 - 8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskNegotiatedLinkWidth 1.3.6.1.4.1.674.10893.1.20.130.4.1.53
Provides the information regarding Negtioated Link Width of Array disk. Possible values are: 0 - 8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskEnclosureConnectionTable 1.3.6.1.4.1.674.10893.1.20.130.5
A table of the connections between array disks, their enclosure, and their associated controller. For each object in the table, its object number corresponds to an instance number in the appropriate MIB table for that object where all of the object properties can be found. Note: Only array disks that are part of an enclosure will be listed in this table. Backplanes are considered enclosures by Storage Management.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArrayDiskEnclosureConnectionEntry

arrayDiskEnclosureConnectionEntry 1.3.6.1.4.1.674.10893.1.20.130.5.1
An entry in the Array Disk Enclosure Connection table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArrayDiskEnclosureConnectionEntry  

arrayDiskEnclosureConnectionNumber 1.3.6.1.4.1.674.10893.1.20.130.5.1.1
Instance number of this array disk connection entry. This table shows the array disk to enclosure relationship.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

arrayDiskEnclosureConnectionArrayDiskName 1.3.6.1.4.1.674.10893.1.20.130.5.1.2
The name of the array disk in this connection as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskEnclosureConnectionArrayDiskNumber 1.3.6.1.4.1.674.10893.1.20.130.5.1.3
The instance number of the array disk in the arrayDiskTable in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskEnclosureConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.20.130.5.1.4
The name of the enclosure as represented in Storage Management to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskEnclosureConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.20.130.5.1.5
The instance number in the enclosureTable of the enclosure to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskEnclosureConnectionControllerName 1.3.6.1.4.1.674.10893.1.20.130.5.1.6
The name of the controller as represented in Storage Management to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskEnclosureConnectionControllerNumber 1.3.6.1.4.1.674.10893.1.20.130.5.1.7
The instance number in the controllerTable of the controller to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskChannelConnectionTable 1.3.6.1.4.1.674.10893.1.20.130.6
A table of the connections between array disks, their channel, and their associated controller. For each object in the table, its object number corresponds to an instance number in the appropriate MIB table for that object where all of the object properties can be found. Note: Only array disks that are NOT part of an enclosure will be listed in this table. Backplanes are considered enclosures by Storage Management.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArrayDiskChannelConnectionEntry

arrayDiskChannelConnectionEntry 1.3.6.1.4.1.674.10893.1.20.130.6.1
An entry in the Array Disk Channel Connection table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArrayDiskChannelConnectionEntry  

arrayDiskChannelConnectionNumber 1.3.6.1.4.1.674.10893.1.20.130.6.1.1
Instance number of this array disk connection entry. This table shows the array disk to SCSI channel relationship. There is no enclosure service processor associated with these array disks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

arrayDiskChannelConnectionArrayDiskName 1.3.6.1.4.1.674.10893.1.20.130.6.1.2
The name of the array disk in this connection as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskChannelConnectionArrayDiskNumber 1.3.6.1.4.1.674.10893.1.20.130.6.1.3
The instance number of the array disk in the arrayDiskTable in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskChannelConnectionChannelName 1.3.6.1.4.1.674.10893.1.20.130.6.1.4
The name of the channel as represented in Storage Management to which is array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskChannelConnectionChannelNumber 1.3.6.1.4.1.674.10893.1.20.130.6.1.5
The instance number of the channel in the channelTable to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskChannelConnectionControllerName 1.3.6.1.4.1.674.10893.1.20.130.6.1.6
The name of the controller as represented in Storage Management to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskChannelConnectionControllerNumber 1.3.6.1.4.1.674.10893.1.20.130.6.1.7
The instance number in the controllerTable of the controller to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fanTable 1.3.6.1.4.1.674.10893.1.20.130.7
A table of managed Fans. The number of entries is related to number of Fans discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FanEntry

fanEntry 1.3.6.1.4.1.674.10893.1.20.130.7.1
An entry in the Fan table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FanEntry  

fanNumber 1.3.6.1.4.1.674.10893.1.20.130.7.1.1
Instance number of this fan entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

fanName 1.3.6.1.4.1.674.10893.1.20.130.7.1.2
The fan's name as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanVendor 1.3.6.1.4.1.674.10893.1.20.130.7.1.3
The fan's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanState 1.3.6.1.4.1.674.10893.1.20.130.7.1.4
The current condition of the fan. Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded 21: Missing
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), degraded(6), removed(11), missing(21)  

fanSeverity 1.3.6.1.4.1.674.10893.1.20.130.7.1.5
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

fanProbeUnit 1.3.6.1.4.1.674.10893.1.20.130.7.1.6
This entry is obsolete for Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeMinWarning 1.3.6.1.4.1.674.10893.1.20.130.7.1.7
This entry is obsolete. This setting is not supported by fans managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeMinCritical 1.3.6.1.4.1.674.10893.1.20.130.7.1.8
This entry is obsolete. This setting is not supported by fans managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeMaxWarning 1.3.6.1.4.1.674.10893.1.20.130.7.1.9
This entry is obsolete. This setting is not supported by fans managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeMaxCritical 1.3.6.1.4.1.674.10893.1.20.130.7.1.10
This entry is obsolete. This setting is not supported by fans managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeCurrValue 1.3.6.1.4.1.674.10893.1.20.130.7.1.11
The current speed of the fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fan1PartNumber 1.3.6.1.4.1.674.10893.1.20.130.7.1.12
The part number of the fan in the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fan2PartNumber 1.3.6.1.4.1.674.10893.1.20.130.7.1.13
This entry is obsolete. This setting is not supported by fans managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

fanRollUpStatus 1.3.6.1.4.1.674.10893.1.20.130.7.1.14
Severity of the fan state. This is the combined status of the fan and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

fanComponentStatus 1.3.6.1.4.1.674.10893.1.20.130.7.1.15
The status of the fan itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

fanNexusID 1.3.6.1.4.1.674.10893.1.20.130.7.1.16
Durable unique ID for this fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanRevision 1.3.6.1.4.1.674.10893.1.20.130.7.1.17
The revision number of the fan in the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanConnectionTable 1.3.6.1.4.1.674.10893.1.20.130.8
A table of the connections between each fan on the managed node and its enclosure. Each enclosure number in the table corresponds to that enclosure instance in the Enclosure Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FanConnectionEntry

fanConnectionEntry 1.3.6.1.4.1.674.10893.1.20.130.8.1
An entry in the Fan Connection table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FanConnectionEntry  

fanConnectionNumber 1.3.6.1.4.1.674.10893.1.20.130.8.1.1
Instance number of this fan connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

fanConnectionFanName 1.3.6.1.4.1.674.10893.1.20.130.8.1.2
The name of the fan in this connection as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanConnectionFanNumber 1.3.6.1.4.1.674.10893.1.20.130.8.1.3
The instance number of the fan in the fanTable in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fanConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.20.130.8.1.4
The name of the enclosure as represented in Storage Management to which this fan belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.20.130.8.1.5
The instance number of the enclosure in the enclosureTable to which this fan belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

powerSupplyTable 1.3.6.1.4.1.674.10893.1.20.130.9
A table of managed Power Supplies. The number of entries is related to number of Power Supplies discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PowerSupplyEntry

powerSupplyEntry 1.3.6.1.4.1.674.10893.1.20.130.9.1
An entry in the Power Supply table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PowerSupplyEntry  

powerSupplyNumber 1.3.6.1.4.1.674.10893.1.20.130.9.1.1
Instance number of this power supply entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

powerSupplyName 1.3.6.1.4.1.674.10893.1.20.130.9.1.2
The power supply's name as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powerSupplyVendor 1.3.6.1.4.1.674.10893.1.20.130.9.1.3
The power supply's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powerSupplyState 1.3.6.1.4.1.674.10893.1.20.130.9.1.4
The current condition of the power supply. Possible states: 0 : Unknown 1 : Ready 2 : Failed 5 : Not Installed 6 : Degraded 11: Removed 21: Missing
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), notInstalled(5), degraded(6), removed(11), missing(21)  

powerSupplySeverity 1.3.6.1.4.1.674.10893.1.20.130.9.1.5
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

powerSupply1PartNumber 1.3.6.1.4.1.674.10893.1.20.130.9.1.6
The part number of the power supply of the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powerSupply2PartNumber 1.3.6.1.4.1.674.10893.1.20.130.9.1.7
This entry is obsolete. This setting is not supported by power supplies managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

powerSupplyRollUpStatus 1.3.6.1.4.1.674.10893.1.20.130.9.1.8
Severity of the power supply state. This is the combined status of the power supply and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

powerSupplyComponentStatus 1.3.6.1.4.1.674.10893.1.20.130.9.1.9
The status of the power supply itself without the propegation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

powerSupplyNexusID 1.3.6.1.4.1.674.10893.1.20.130.9.1.10
Durable unique ID for this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powerSupplyRevision 1.3.6.1.4.1.674.10893.1.20.130.9.1.11
The revision number of the power supply in the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powerSupplyConnectionTable 1.3.6.1.4.1.674.10893.1.20.130.10
A table of the connections between each power supply on the managed node and its enclosure. Each enclosure number in the table corresponds to that enclosure instance in the Enclosure Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PowerSupplyConnectionEntry

powerSupplyConnectionEntry 1.3.6.1.4.1.674.10893.1.20.130.10.1
An entry in the Power Supply Connection table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PowerSupplyConnectionEntry  

powerSupplyConnectionNumber 1.3.6.1.4.1.674.10893.1.20.130.10.1.1
Instance number of this power supply connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

powerSupplyConnectionPowersupplyName 1.3.6.1.4.1.674.10893.1.20.130.10.1.2
The name of the power supply in this connection as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powerSupplyConnectionPowersupplyNumber 1.3.6.1.4.1.674.10893.1.20.130.10.1.3
This instance number in the powersupplyTable of the power supply in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

powerSupplyConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.20.130.10.1.4
The name of the enclosure to which this power supply is connected as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powerSupplyConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.20.130.10.1.5
The instance number of the enclosure in the enclosureTable to which this power supply is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

powerSupplyConnectionFirmwareVersion 1.3.6.1.4.1.674.10893.1.20.130.10.1.6
Displays power supply connection firmware version. Note: Available above 1.04 firmware version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureProbeTable 1.3.6.1.4.1.674.10893.1.20.130.11
A table of managed Temperature Probes. The number of entries is related to number of Temperature Probes discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TemperatureProbeEntry

temperatureProbeEntry 1.3.6.1.4.1.674.10893.1.20.130.11.1
An entry in the Temperature Probe table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TemperatureProbeEntry  

temperatureProbeNumber 1.3.6.1.4.1.674.10893.1.20.130.11.1.1
Instance number of this temperature probe entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

temperatureProbeName 1.3.6.1.4.1.674.10893.1.20.130.11.1.2
Name of this temperature probe as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureProbeVendor 1.3.6.1.4.1.674.10893.1.20.130.11.1.3
Temperature probe's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureProbeState 1.3.6.1.4.1.674.10893.1.20.130.11.1.4
The current condition of the temperature probe. Possible states: 0: Unknown 1: Ready 2: Failed (Minimum Failure Threshold Exceeded, Maximum Failure Threshold Exceeded) 4: Offline 6: Degraded (Minimum Warning Threshold Exceeded, Maximum Warning Threshold Exceeded) 9: Inactive 21: Missing
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), offline(4), degraded(6), inactive(9), missing(21)  

temperatureProbeSeverity 1.3.6.1.4.1.674.10893.1.20.130.11.1.5
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

temperatureProbeUnit 1.3.6.1.4.1.674.10893.1.20.130.11.1.6
The units that will be used to display temperatures for this temperature probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureProbeMinWarning 1.3.6.1.4.1.674.10893.1.20.130.11.1.7
The minimum temperature that will force the probe into a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureProbeMinCritical 1.3.6.1.4.1.674.10893.1.20.130.11.1.8
The minimum temperature that will force the probe into an error state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureProbeMaxWarning 1.3.6.1.4.1.674.10893.1.20.130.11.1.9
The maximum temperature that will force the probe into a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureProbeMaxCritical 1.3.6.1.4.1.674.10893.1.20.130.11.1.10
The maximum temperature that will force the probe into an error state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureProbeCurValue 1.3.6.1.4.1.674.10893.1.20.130.11.1.11
The current temperature of this probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureProbeRollUpStatus 1.3.6.1.4.1.674.10893.1.20.130.11.1.12
Severity of the temperature probe state. This is the combined status of the temperature probe and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

temperatureProbeComponentStatus 1.3.6.1.4.1.674.10893.1.20.130.11.1.13
The status of the temperature probe itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

temperatureProbeNexusID 1.3.6.1.4.1.674.10893.1.20.130.11.1.14
Durable unique ID for this temperature probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureConnectionTable 1.3.6.1.4.1.674.10893.1.20.130.12
A table of the connections between each temperature probe on the managed node and its enclosure. Each enclosure number in the table corresponds to that enclosure instance in the Enclosure Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TemperatureConnectionEntry

temperatureConnectionEntry 1.3.6.1.4.1.674.10893.1.20.130.12.1
An entry in the Temperature Probe Connection table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TemperatureConnectionEntry  

temperatureConnectionNumber 1.3.6.1.4.1.674.10893.1.20.130.12.1.1
Instance number of this temperature probe connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

temperatureConnectionTemperatureName 1.3.6.1.4.1.674.10893.1.20.130.12.1.2
The name of the temperature probe in this connection as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureConnectionTemperatureNumber 1.3.6.1.4.1.674.10893.1.20.130.12.1.3
The instance number in the temperatureTable of the temperature probe in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.20.130.12.1.4
The name of the enclosure as represented in Storage Management to which this temperature probe belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.20.130.12.1.5
The instance number of the enclosure in the enclosureTable to which this temperature probe belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureManagementModuleTable 1.3.6.1.4.1.674.10893.1.20.130.13
A table of managed Enclosure Management Modules. The number of entries is related to number of Enclosure Management Modules discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosureManagementModuleEntry

enclosureManagementModuleEntry 1.3.6.1.4.1.674.10893.1.20.130.13.1
An entry in the Enclosure Management Module table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EnclosureManagementModuleEntry  

enclosureManagementModuleNumber 1.3.6.1.4.1.674.10893.1.20.130.13.1.1
Instance number of this enclosure memory module entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

enclosureManagementModuleName 1.3.6.1.4.1.674.10893.1.20.130.13.1.2
Name of this enclosure memory module as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleVendor 1.3.6.1.4.1.674.10893.1.20.130.13.1.3
The management module's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleState 1.3.6.1.4.1.674.10893.1.20.130.13.1.4
The current condition of the enclosure management module. Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 5: Not Installed 6: Degraded 21: Missing
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), notInstalled(5), degraded(6), missing(21)  

enclosureManagementModuleSeverity 1.3.6.1.4.1.674.10893.1.20.130.13.1.5
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

enclosureManagementModulePartNumber 1.3.6.1.4.1.674.10893.1.20.130.13.1.6
The part number of the enclosure memory module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleType 1.3.6.1.4.1.674.10893.1.20.130.13.1.7
The type of the enclosure management module. Possible values: 0: Unknown 1: EMM 2: Termination Card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER eMM(1), terminationCard(2)  

enclosureManagementModuleFWVersion 1.3.6.1.4.1.674.10893.1.20.130.13.1.8
Firmware version of the enclosure memory module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleMaxSpeed 1.3.6.1.4.1.674.10893.1.20.130.13.1.9
The maximum bus speed of the enclosure management module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleRollUpStatus 1.3.6.1.4.1.674.10893.1.20.130.13.1.10
Severity of the enclosure management module state. This is the combined status of the EMM and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

enclosureManagementModuleComponentStatus 1.3.6.1.4.1.674.10893.1.20.130.13.1.11
The status of the enclosure management module itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

enclosureManagementModuleNexusID 1.3.6.1.4.1.674.10893.1.20.130.13.1.12
Durable unique ID for this EMM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleRevision 1.3.6.1.4.1.674.10893.1.20.130.13.1.13
The revision number of the enclosure management module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleConnectionTable 1.3.6.1.4.1.674.10893.1.20.130.14
A table of the connections between each enclosure management module on the managed node and its enclosure. Each enclosure number in the table corresponds to that enclosure instance in the Enclosure Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosureManagementModuleConnectionEntry

enclosureManagementModuleConnectionEntry 1.3.6.1.4.1.674.10893.1.20.130.14.1
An entry in the Enclosure Management Module Connection table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EnclosureManagementModuleConnectionEntry  

enclosureManagementModuleConnectionNumber 1.3.6.1.4.1.674.10893.1.20.130.14.1.1
Instance number of this enclosure management module connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

enclosureManagementModuleConnectionEMMName 1.3.6.1.4.1.674.10893.1.20.130.14.1.2
The name of the enclosure management module in this connection as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleConnectionEMMNumber 1.3.6.1.4.1.674.10893.1.20.130.14.1.3
The instance number of the enclosure management module in the enclosureManagementModuleTable in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureManagementModuleConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.20.130.14.1.4
The name of the enclosure as represented in Storage Management to which this enclosure management module belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.20.130.14.1.5
The instance number of the enclosure in the enclosureTable to which this enclosure management module belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

batteryTable 1.3.6.1.4.1.674.10893.1.20.130.15
A table of managed Batteries. The number of entries is related to number of Batteries discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BatteryEntry

batteryEntry 1.3.6.1.4.1.674.10893.1.20.130.15.1
An entry in the Battery table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BatteryEntry  

batteryNumber 1.3.6.1.4.1.674.10893.1.20.130.15.1.1
Instance number of this battery entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

batteryName 1.3.6.1.4.1.674.10893.1.20.130.15.1.2
The battery's name as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

batteryVendor 1.3.6.1.4.1.674.10893.1.20.130.15.1.3
The battery's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

batteryState 1.3.6.1.4.1.674.10893.1.20.130.15.1.4
Current state of battery. Possible values: 0: Unknown 1: Ready 2: Failed 6: Degraded 7: Reconditioning 9: High 10: Low Power 12: Charging 21: Missing 36: Learning
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), degraded(6), reconditioning(7), high(9), low(10), charging(12), missing(21), learning(36)  

batteryRollUpStatus 1.3.6.1.4.1.674.10893.1.20.130.15.1.5
Severity of the battery state. This is the combined status of the battery and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

batteryComponentStatus 1.3.6.1.4.1.674.10893.1.20.130.15.1.6
The status of the battery itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

batteryChargeCount 1.3.6.1.4.1.674.10893.1.20.130.15.1.7
The number of charges that have been applied to the battery.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

batteryMaxChargeCount 1.3.6.1.4.1.674.10893.1.20.130.15.1.8
The maximum number of charges that can be applied to the battery.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

batteryNexusID 1.3.6.1.4.1.674.10893.1.20.130.15.1.9
Durable unique ID for this battery.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

batteryPredictedCapacity 1.3.6.1.4.1.674.10893.1.20.130.15.1.10
This property displays the battery's ability to be charged. Possible values: 1: Failed - The battery cannot be charged and needs to be replaced. 2: Ready - The battery can be charged to full capacity. 4: Unknown - The battery is completing a Learn cycle. The charge capacity of the battery cannot be determined until the Learn cycle is complete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER failed(1), ready(2), unknown(4)  

batteryNextLearnTime 1.3.6.1.4.1.674.10893.1.20.130.15.1.11
Time next learn cycle must be executed (in hours.)
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

batteryLearnState 1.3.6.1.4.1.674.10893.1.20.130.15.1.12
Specifies the learn state activity of the battery. Possible values: 1 : Failed 2 : Active 4 : Timed out 8 : Requested 16: Idle 32: Due
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER failed(1), active(2), timedOut(4), requested(8), idle(16), due(32)  

batteryID 1.3.6.1.4.1.674.10893.1.20.130.15.1.13
Represents unique id for battery.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

batteryMaxLearnDelay 1.3.6.1.4.1.674.10893.1.20.130.15.1.14
The maximum amount of time (in hours) that the battery learn cycle can be delayed.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

batteryLearnMode 1.3.6.1.4.1.674.10893.1.20.130.15.1.15
Indicates current learn mode of the battery. Possible values: 1: Auto 2: Warn 4: Autowarn 8: Unknown
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), warn(2), autowarn(4), unknown(8)  

batteryConnectionTable 1.3.6.1.4.1.674.10893.1.20.130.16
A table of the connections between each battery on the managed node and its controller. Each controller number in the table corresponds to that controller instance in the Controller Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BatteryConnectionEntry

batteryConnectionEntry 1.3.6.1.4.1.674.10893.1.20.130.16.1
An entry in the Battery Connection table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BatteryConnectionEntry  

batteryConnectionNumber 1.3.6.1.4.1.674.10893.1.20.130.16.1.1
Instance number of this battery connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

batteryConnectionBatteryName 1.3.6.1.4.1.674.10893.1.20.130.16.1.2
The name of the battery in this connection as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

batteryConnectionBatteryNumber 1.3.6.1.4.1.674.10893.1.20.130.16.1.3
The instance number in the batteryTable of the battery in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

batteryConnectionControllerName 1.3.6.1.4.1.674.10893.1.20.130.16.1.4
The name of the controller as represented in Storage Management to which this battery belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

batteryConnectionControllerNumber 1.3.6.1.4.1.674.10893.1.20.130.16.1.5
The instance number of the controller in the controllerTable to which this battery belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerTable 1.3.6.1.4.1.674.10893.1.20.130.1
A table of managed RAID controllers. The number of entries is related to number of RAID controllers discovered in the system. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ControllerEntry

controllerEntry 1.3.6.1.4.1.674.10893.1.20.130.1.1
An entry in the table of RAID controllers. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ControllerEntry  

controllerNumber 1.3.6.1.4.1.674.10893.1.20.130.1.1.1
Instance number of this controller entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

controllerName 1.3.6.1.4.1.674.10893.1.20.130.1.1.2
The name of the controller in this subsystem as represented in Storage Management. Includes the controller type and instance. For example: Perc3/QC 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerVendor 1.3.6.1.4.1.674.10893.1.20.130.1.1.3
The controller's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerType 1.3.6.1.4.1.674.10893.1.20.130.1.1.4
The type of this controller: 1: SCSI 2: PV660F 3: PV662F 4: IDE (Integrated/Intelligent Drive Electronics) 5: SATA (Serial Advanced Technology Attachment) 6: SAS (Serial Attached SCSI) 9: PCIe SSD
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER scsi(1), pv660F(2), pv662F(3), ide(4), sata(5), sas(6), pciessd(9)  

controllerState 1.3.6.1.4.1.674.10893.1.20.130.1.1.5
The current condition of the controller's subsystem (which includes any devices connected to it.) Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6)  

controllerSeverity 1.3.6.1.4.1.674.10893.1.20.130.1.1.6
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

controllerRebuildRateInPercent 1.3.6.1.4.1.674.10893.1.20.130.1.1.7
The percent of the compute cycles dedicated to rebuilding failed array disks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

controllerFWVersion 1.3.6.1.4.1.674.10893.1.20.130.1.1.8
The controller's current firmware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerCacheSizeInMB 1.3.6.1.4.1.674.10893.1.20.130.1.1.9
The controller's current amount of cache memory in megabytes. If this size is 0, it is less than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerCacheSizeInBytes 1.3.6.1.4.1.674.10893.1.20.130.1.1.10
The controller's current amount of cache memory that is less than a megabyte. This combined with the controllerCacheSizeInMB will be the total amount of memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerPhysicalDeviceCount 1.3.6.1.4.1.674.10893.1.20.130.1.1.11
Number of physical devices on the controller channel including both disks and the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerLogicalDeviceCount 1.3.6.1.4.1.674.10893.1.20.130.1.1.12
Number of virtual disks on the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerPartnerStatus 1.3.6.1.4.1.674.10893.1.20.130.1.1.13
This entry is obsolete for Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerHostPortCount 1.3.6.1.4.1.674.10893.1.20.130.1.1.14
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerMemorySizeInMB 1.3.6.1.4.1.674.10893.1.20.130.1.1.15
Size of memory in megabytes on the controller. If this size is 0, it is less than a megabyte. This attribute is only supported on Adaptec controllers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerMemorySizeInBytes 1.3.6.1.4.1.674.10893.1.20.130.1.1.16
Size of memory on the controller that is less than a megabyte. This combined with the controllerMemorySizeInMB will be the total size of the memory. This attribute is only supported on Adaptec controllers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerDriveChannelCount 1.3.6.1.4.1.674.10893.1.20.130.1.1.17
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

controllerFaultTolerant 1.3.6.1.4.1.674.10893.1.20.130.1.1.18
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1)  

controllerC0Port0WWN 1.3.6.1.4.1.674.10893.1.20.130.1.1.19
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC0Port0Name 1.3.6.1.4.1.674.10893.1.20.130.1.1.20
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC0Port0ID 1.3.6.1.4.1.674.10893.1.20.130.1.1.21
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC0Target 1.3.6.1.4.1.674.10893.1.20.130.1.1.22
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC0Channel 1.3.6.1.4.1.674.10893.1.20.130.1.1.23
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC0OSController 1.3.6.1.4.1.674.10893.1.20.130.1.1.24
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC0BatteryState 1.3.6.1.4.1.674.10893.1.20.130.1.1.25
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), failed(2), reconditioning(7), high(9), low(10), charging(12), missing(21)  

controllerC1Port0WWN 1.3.6.1.4.1.674.10893.1.20.130.1.1.26
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC1Port0Name 1.3.6.1.4.1.674.10893.1.20.130.1.1.27
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC1Port0ID 1.3.6.1.4.1.674.10893.1.20.130.1.1.28
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC1Target 1.3.6.1.4.1.674.10893.1.20.130.1.1.29
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC1Channel 1.3.6.1.4.1.674.10893.1.20.130.1.1.30
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC1OSController 1.3.6.1.4.1.674.10893.1.20.130.1.1.31
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC1BatteryState 1.3.6.1.4.1.674.10893.1.20.130.1.1.32
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), failed(2), reconditioning(7), high(9), low(10), charging(12), missing(21)  

controllerNodeWWN 1.3.6.1.4.1.674.10893.1.20.130.1.1.33
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC0Port1WWN 1.3.6.1.4.1.674.10893.1.20.130.1.1.34
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC1Port1WWN 1.3.6.1.4.1.674.10893.1.20.130.1.1.35
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerBatteryChargeCount 1.3.6.1.4.1.674.10893.1.20.130.1.1.36
This entry is obsolete. Fibre channel is not supported in Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerRollUpStatus 1.3.6.1.4.1.674.10893.1.20.130.1.1.37
Severity of the controller state. This is the combined status of the controller and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

controllerComponentStatus 1.3.6.1.4.1.674.10893.1.20.130.1.1.38
The status of the controller itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

controllerNexusID 1.3.6.1.4.1.674.10893.1.20.130.1.1.39
Durable unique ID for this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerAlarmState 1.3.6.1.4.1.674.10893.1.20.130.1.1.40
State, or setting for the controller's alarm. Possible values: 1: Enabled 2: Disabled 3: Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-applicable(3)  

controllerDriverVersion 1.3.6.1.4.1.674.10893.1.20.130.1.1.41
Currently installed driver version for this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerPCISlot 1.3.6.1.4.1.674.10893.1.20.130.1.1.42
The PCI slot number or embedded number for controllers on the motherboard.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerClusterMode 1.3.6.1.4.1.674.10893.1.20.130.1.1.43
Identifies if the controller is in cluster mode. Possible values: 1 : Enabled 2 : Disabled 3 : Active (enabled and active) 99: Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), active(3), notApplicable(99)  

controllerMinFWVersion 1.3.6.1.4.1.674.10893.1.20.130.1.1.44
The minimum firmware version for Storage Management to support the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerMinDriverVersion 1.3.6.1.4.1.674.10893.1.20.130.1.1.45
The minimum driver version for Storage Management to support the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerSCSIInitiatorID 1.3.6.1.4.1.674.10893.1.20.130.1.1.46
The SCSI ID of the initiator.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerChannelCount 1.3.6.1.4.1.674.10893.1.20.130.1.1.47
Number of channels on the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerReconstructRate 1.3.6.1.4.1.674.10893.1.20.130.1.1.48
The rate for reconstruct on the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerPatrolReadRate 1.3.6.1.4.1.674.10893.1.20.130.1.1.49
The rate for patrol read on the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerBGIRate 1.3.6.1.4.1.674.10893.1.20.130.1.1.50
The rate for background initialization on the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerCheckConsistencyRate 1.3.6.1.4.1.674.10893.1.20.130.1.1.51
The rate for check consistency on the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerPatrolReadMode 1.3.6.1.4.1.674.10893.1.20.130.1.1.52
Identifies the patrol read mode. Possible values: 1: Automatic (enabled) 2: Manual (enabled) 3: Disabled
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER automatic(1), manual(2), disabled(3)  

controllerPatrolReadState 1.3.6.1.4.1.674.10893.1.20.130.1.1.53
The state of the patrol read. 1: Stopped - not running 2: Ready - ready to start 4: Active - is running 8: Aborted - has aborted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stopped(1), ready(2), active(4), aborted(8)  

controllerPatrolReadIterations 1.3.6.1.4.1.674.10893.1.20.130.1.1.54
The number of times Patrol Read has been run on this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerStorportDriverVersion 1.3.6.1.4.1.674.10893.1.20.130.1.1.55
Provide current Windows OS storport driver version. Not applicable for Linux.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerMinRequiredStorportVer 1.3.6.1.4.1.674.10893.1.20.130.1.1.56
Provides minimum required storport driver version for Windows OS only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerEncryptionCapable 1.3.6.1.4.1.674.10893.1.20.130.1.1.57
Indicates Encryption capability of the controller. Value: 1 - Capable, 99 - NotApplicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerEncryptionKeyPresent 1.3.6.1.4.1.674.10893.1.20.130.1.1.58
Indicates presence of Encryption Key for the controller. Value: 1 - Yes, 0 - No, 99 - NotApplicable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

controllerPersistentHotSpare 1.3.6.1.4.1.674.10893.1.20.130.1.1.59
Indicates Persistent Hot Spare capability of the controller Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined / Not applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

controllerSpinDownUnconfiguredDrives 1.3.6.1.4.1.674.10893.1.20.130.1.1.60
Indicates controller capability to put unconfigured drives in power save mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined / Not applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

controllerSpinDownHotSpareDrives 1.3.6.1.4.1.674.10893.1.20.130.1.1.61
Indicates controller capability to put hot spare drives in power save mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined / Not applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

controllerSpinDownTimeInterval 1.3.6.1.4.1.674.10893.1.20.130.1.1.62
Shows the duration in minutes after which, the unconfigured or hot spare drives will be spun down to power save mode. Value: 30 to 1440 Note: A value of 9999 indicates feature not available.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 30..1440  

controllerEncryptionMode 1.3.6.1.4.1.674.10893.1.20.130.1.1.63
Indicates the current encryption mode of the controller. Value: 0 - No Encryption, 1 - Local Key Management (LKM), 2 - Dell Key Management (DKM), 99 - Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerCacheCade 1.3.6.1.4.1.674.10893.1.20.130.1.1.64
Indicates if the controller is CacheCade capable or not. Value: 1 - Capable, 0 - Not Capable, 99 - Undetermined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerSpinDownConfiguredDrives 1.3.6.1.4.1.674.10893.1.20.130.1.1.65
Indicates controller capability to spin down configured physical disks. Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerAutomaticPowerSaving 1.3.6.1.4.1.674.10893.1.20.130.1.1.66
Indicates controller capability for automatic power saving. Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerConfiguredDrivesSpinUpTime 1.3.6.1.4.1.674.10893.1.20.130.1.1.67
Indicates configured drives spin up start time. Value: 1:00 AM to 12:59 PM, 9999 - Undetermined
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerConfiguredDrivesSpinUpTimeInterval 1.3.6.1.4.1.674.10893.1.20.130.1.1.68
Indicates configured drives spin up time interval in hours. This value is added with configured drives start time to arrive at time window in which configured drives are always spin up. Value: 1 .. 24, 9999 - Undetermined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 30..1440  

controllerPreservedCache 1.3.6.1.4.1.674.10893.1.20.130.1.1.69
Indicates if preserved cache is present on the controller. Values: 1- Yes, 0 - No, 99 - Not available / Not applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerPIEnable 1.3.6.1.4.1.674.10893.1.20.130.1.1.70
Indicates if T10 PI is enabled on a controller. Value can be either 0 (T10 PI disabled) or 1 (T10 PI enabled).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerCurrentMode 1.3.6.1.4.1.674.10893.1.20.130.1.1.71
Shows the current controller mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

frontChassisSlot 1.3.6.1.4.1.674.10893.1.20.130.1.1.72
Shows the physical slot on the chassis for stash .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerInstance 1.3.6.1.4.1.674.10893.1.20.130.1.1.73
Shows the current instance of the controller for stash .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

tapeDriveTable 1.3.6.1.4.1.674.10893.1.20.130.17
A table of listed Tape Drives The number of entries is related to number of Tape Drives discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TapeDriveEntry

tapeDriveEntry 1.3.6.1.4.1.674.10893.1.20.130.17.1
An entry in the Tape Library table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TapeDriveEntry  

tapeDriveNumber 1.3.6.1.4.1.674.10893.1.20.130.17.1.1
Instance number of this tape drive entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

tapeDriveName 1.3.6.1.4.1.674.10893.1.20.130.17.1.2
The name of the tape drive as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tapeDriveVendor 1.3.6.1.4.1.674.10893.1.20.130.17.1.3
The tape drive's manufacturer's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tapeDriveProductID 1.3.6.1.4.1.674.10893.1.20.130.17.1.4
The model number of the tape drive
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tapeDriveNexusID 1.3.6.1.4.1.674.10893.1.20.130.17.1.5
Durable unique ID for this tape drive
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tapeDriveBusType 1.3.6.1.4.1.674.10893.1.20.130.17.1.6
The bus type of the tape drive. Possible values: 8. SAS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sas(8)  

tapeDriveSASAddress 1.3.6.1.4.1.674.10893.1.20.130.17.1.7
The specified SAS address if this is a SAS tape drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

tapeDriveMediaType 1.3.6.1.4.1.674.10893.1.20.130.17.1.8
The Media type of the tape drive. Possible Values: 4:Tape
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tape(4)  

nvmeAdapterTable 1.3.6.1.4.1.674.10893.1.20.130.18
A table of listed NVME Adapter cards. The number of entries is related to number of NVME Adapter cards discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvmeAdapterEntry

nvmeAdapterEntry 1.3.6.1.4.1.674.10893.1.20.130.18.1
An entry in the NvmeAdapter table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvmeAdapterEntry  

nvmeAdapterNumber 1.3.6.1.4.1.674.10893.1.20.130.18.1.1
Instance number of this NVME Adapter entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

nvmeAdapterState 1.3.6.1.4.1.674.10893.1.20.130.18.1.2
The current state of the NVMe Adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterControllerNum 1.3.6.1.4.1.674.10893.1.20.130.18.1.3
The PCIeSSD subsystem Id to which the NVMe Adapter belongs to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterPCISlot 1.3.6.1.4.1.674.10893.1.20.130.18.1.4
The PCI slot of the system where the adapter card is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterDeviceName 1.3.6.1.4.1.674.10893.1.20.130.18.1.5
The device name of the NVMe Adapter as it is represented in OMSA and also the operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvmeAdapterVendor 1.3.6.1.4.1.674.10893.1.20.130.18.1.6
NVMe Adapter manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvmeAdapterProductID 1.3.6.1.4.1.674.10893.1.20.130.18.1.7
The product id or part number of the NVMe Adapter
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvmeAdapterSerialNumber 1.3.6.1.4.1.674.10893.1.20.130.18.1.8
Product serial number of the NVMe Adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvmeAdapterRevision 1.3.6.1.4.1.674.10893.1.20.130.18.1.9
The NVMe Adapter revision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvmeAdapterDriverVersion 1.3.6.1.4.1.674.10893.1.20.130.18.1.10
NVMe Adapter driver version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvmeAdapterPCIBusNo 1.3.6.1.4.1.674.10893.1.20.130.18.1.11
The PCI Bus number of the NVMe adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterPCIDeviceNum 1.3.6.1.4.1.674.10893.1.20.130.18.1.12
The PCI device number of the NVMe Adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterPCIFuncNum 1.3.6.1.4.1.674.10893.1.20.130.18.1.13
The PCI device number of the NVMe Adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterNexusID 1.3.6.1.4.1.674.10893.1.20.130.18.1.14
Nexus ID of the NVMe Adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvmeAdapterBusProtocolType 1.3.6.1.4.1.674.10893.1.20.130.18.1.15
The Bus protocol for NVMe device, expected value: 9 (PCIeSSD).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterMediaType 1.3.6.1.4.1.674.10893.1.20.130.18.1.16
NVMe Adapter media type. Possible Values: 1:unknown 2:ssd
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterLengthInMegaBytes 1.3.6.1.4.1.674.10893.1.20.130.18.1.17
Size in megabytes of the NVMe Adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterLengthOffsetBytes 1.3.6.1.4.1.674.10893.1.20.130.18.1.18
No of bytes after total number of megabytes have been subtracted from the total size of the NVMe Adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterDeviceID 1.3.6.1.4.1.674.10893.1.20.130.18.1.19
The device Id of the NVMe Adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterModelNumber 1.3.6.1.4.1.674.10893.1.20.130.18.1.20
Model number of the NVMe Adapter as per the manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvmeAdapterNegotiatedSpeed 1.3.6.1.4.1.674.10893.1.20.130.18.1.21
The negotiated speed of the NVMe adapter in GT/s.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterCapableSpeed 1.3.6.1.4.1.674.10893.1.20.130.18.1.22
The maximum rated speed of the NVMe adapter in GT/s.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterRemainingRatedWrEnd 1.3.6.1.4.1.674.10893.1.20.130.18.1.23
The remaining percentage of writes on the NVME device
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterFormFactor 1.3.6.1.4.1.674.10893.1.20.130.18.1.24
The form factor of the NVMe Adapter. Expected Value: 2 means (Card)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterSupportedSpec 1.3.6.1.4.1.674.10893.1.20.130.18.1.25
The NVMe specification supported by the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvmeAdapterMaxLinkWidth 1.3.6.1.4.1.674.10893.1.20.130.18.1.26
The maximum bus width of NVME Adapter
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterNegotiatedLinkWidth 1.3.6.1.4.1.674.10893.1.20.130.18.1.27
The negotiated bus width of NVME Adapter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvmeAdapterSubVendor 1.3.6.1.4.1.674.10893.1.20.130.18.1.28
Sub vendor of the NVMe Adapter device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

logicalDevices 1.3.6.1.4.1.674.10893.1.20.140
OBJECT IDENTIFIER    

arrayDiskLogicalConnectionTable 1.3.6.1.4.1.674.10893.1.20.140.3
A table of the connections between array disks, the virtual disk to which they belong, and their associated logical disk. For each object in the table, its object number corresponds to an instance number in the appropriate MIB table for that object where all of the object properties can be found.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArrayDiskLogicalConnectionEntry

arrayDiskLogicalConnectionEntry 1.3.6.1.4.1.674.10893.1.20.140.3.1
An entry in the Array Disk Logical Connection table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArrayDiskLogicalConnectionEntry  

arrayDiskLogicalConnectionNumber 1.3.6.1.4.1.674.10893.1.20.140.3.1.1
Instance number of this array disk logical connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

arrayDiskLogicalConnectionArrayDiskName 1.3.6.1.4.1.674.10893.1.20.140.3.1.2
The name of the array disk in this logical connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskLogicalConnectionArrayDiskNumber 1.3.6.1.4.1.674.10893.1.20.140.3.1.3
The instance number of the array disk in this logical connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLogicalConnectionVirtualDiskName 1.3.6.1.4.1.674.10893.1.20.140.3.1.4
The name of the virtual disk to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskLogicalConnectionVirtualDiskNumber 1.3.6.1.4.1.674.10893.1.20.140.3.1.5
The instance number of the virtual disk to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLogicalConnectionDiskName 1.3.6.1.4.1.674.10893.1.20.140.3.1.6
The name of the disk group to with this array disk belongs. This property is currently not supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskLogicalConnectionDiskNumber 1.3.6.1.4.1.674.10893.1.20.140.3.1.7
This instance number of the disk group to with this array disk belongs. This property is currently not supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskTable 1.3.6.1.4.1.674.10893.1.20.140.1
A table of managed Virtual Disks. The number of entries is related to number of Virtual Disks discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualDiskEntry

virtualDiskEntry 1.3.6.1.4.1.674.10893.1.20.140.1.1
An entry in the Virtual Disk table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VirtualDiskEntry  

virtualDiskNumber 1.3.6.1.4.1.674.10893.1.20.140.1.1.1
Instance number of this virtual disk entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..100000000  

virtualDiskName 1.3.6.1.4.1.674.10893.1.20.140.1.1.2
The virtual disk's label generated by Storage Management or entered by the user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualDiskDeviceName 1.3.6.1.4.1.674.10893.1.20.140.1.1.3
Device name used by this virtual disk's member disks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualDiskState 1.3.6.1.4.1.674.10893.1.20.140.1.1.4
The current condition of this virtual disk (which includes any member array disks.) Possible states: 0: Unknown 1: Ready - The disk is accessible and has no known problems. 2: Failed - Access has been lost to the data or is about to be lost. 3: Online 4: Offline - The disk is not accessible. The disk may be corrupted or intermittently unavailable. 6: Degraded - The data on the virtual disk is no longer fault tolerant because one of the underlying disks is not online. 15: Resynching 16: Regenerating 24: Rebuilding 26: Formatting 32: Reconstructing 35: Initializing 36: Background Initialization 38: Resynching Paused 52: Permanently Degraded 54: Degraded Redundancy
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6), verifying(7), resynching(15), regenerating(16), failedRedundancy(18), rebuilding(24), formatting(26), reconstructing(32), initializing(35), backgroundInit(36), permanentlyDegraded(52)  

virtualDiskSeverity 1.3.6.1.4.1.674.10893.1.20.140.1.1.5
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

virtualDiskLengthInMB 1.3.6.1.4.1.674.10893.1.20.140.1.1.6
The size of this virtual disk in megabytes. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskLengthInBytes 1.3.6.1.4.1.674.10893.1.20.140.1.1.7
The portion of the virtual disk in bytes that is smaller than a megabyte. This size plus the virtualDiskLengthInMB is the total size of the virtual disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskFreeSpaceInMB 1.3.6.1.4.1.674.10893.1.20.140.1.1.8
This entry is obsolete. This property is not supported for virtual disks managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskFreeSpaceInBytes 1.3.6.1.4.1.674.10893.1.20.140.1.1.9
This entry is obsolete. This property is not supported for virtual disks managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskWritePolicy 1.3.6.1.4.1.674.10893.1.20.140.1.1.10
Indicates whether the controller's write cache will be used when writing to a virtual disk. Possible values: 1: Enabled - Adaptec Write Cache Enabled Protected 2: Disabled - Adaptec Write Cache Disabled 3: LSI Write Back 4: LSI Write Through 5: Enabled Always - Adaptec only 6: Enabled Always - SAS only 9: Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), writeBack(3), writeThrough(4), enabledAlways(5), enabledAlwaysSAS(6), notApplicable(9)  

virtualDiskReadPolicy 1.3.6.1.4.1.674.10893.1.20.140.1.1.11
Indicates whether the controller's read cache will be used when reading from a virtual disk. Possible values: 1: Enabled - Adaptec Read Cache Enabled 2: Disabled - Adaptec Read Cache Disabled 3: LSI Read Ahead 4: LSI Adaptive Read Ahead 5: LSI No Read Ahead 9: Not Applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), readAhead(3), adaptiveReadAhead(4), noReadAhead(5), notApplicable(9)  

virtualDiskCachePolicy 1.3.6.1.4.1.674.10893.1.20.140.1.1.12
Indicates whether the controller's cache is used when reading from or writing to a virtual disk. Possible values: 1: Direct I/O (LSI) 2: Cached I/O (LSI) 99: Not applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER directIO(1), cachedIO(2), not-applicable(99)  

virtualDiskLayout 1.3.6.1.4.1.674.10893.1.20.140.1.1.13
The virtual disk's RAID type. Currently supported types: 1: Concatenated 2: RAID-0 3: RAID-1 7: RAID-5 8: RAID-6 10: RAID-10 12: RAID-50 19: Concatenated RAID 1 24: RAID-60 25: CacheCade
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER concatenated(1), raid-0(2), raid-1(3), raid-2(4), raid-3(5), raid-4(6), raid-5(7), raid-6(8), raid-7(9), raid-10(10), raid-30(11), raid-50(12), addSpares(13), deleteLogical(14), transformLogical(15), raid-0-plus-1(18), concatRaid-1(19), concatRaid-5(20), noRaid(21), volume(22), raidMorph(23), raid-60(24), cacheCade(25)  

virtualDiskCurStripeSizeInMB 1.3.6.1.4.1.674.10893.1.20.140.1.1.14
The stripe size of this virtual disk in megabytes. If this size is 0, it is either smaller than a megabyte or not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskCurStripeSizeInBytes 1.3.6.1.4.1.674.10893.1.20.140.1.1.15
The portion of the stripe size in bytes that is smaller than a megabyte. This size plus the virtualDiskCurStripeSizeInMB is the total stripe size on the virtual disk. If this size is 0, either the entire size is whole megabytes or it is not applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskChannel 1.3.6.1.4.1.674.10893.1.20.140.1.1.16
This entry is obsolete. This property is not supported by virtual disks managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskTargetID 1.3.6.1.4.1.674.10893.1.20.140.1.1.17
Unique ID for the virtual disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskLunID 1.3.6.1.4.1.674.10893.1.20.140.1.1.18
This entry is obsolete. This property is not supported by virtual disks managed under Storage Management.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskRollUpStatus 1.3.6.1.4.1.674.10893.1.20.140.1.1.19
Severity of the virtual disk state. This is the combined status of the virtual disk and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

virtualDiskComponentStatus 1.3.6.1.4.1.674.10893.1.20.140.1.1.20
The status of the virtual disk itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

virtualDiskNexusID 1.3.6.1.4.1.674.10893.1.20.140.1.1.21
Durable unique ID for this virtual disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualDiskArrayDiskType 1.3.6.1.4.1.674.10893.1.20.140.1.1.22
Identifies the type of array (physical) disks used to create the virtual disk. Possible values: 1: SAS 2: SATA 3: SCSI 4: IDE 99: Unknown
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sas(1), sata(2), scsi(3), ide(4), unknown(99)  

virtualDiskBadBlocksDetected 1.3.6.1.4.1.674.10893.1.20.140.1.1.23
Indicates if virtual disk has bad blocks. Value: 0 - No, 1 - Yes, 2 - Not Applicable, 99 - Unknown
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskEncrypted 1.3.6.1.4.1.674.10893.1.20.140.1.1.24
Indicates if virtual disk is encrypted. Value: 0 - No, 1 - Yes, 99 - Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskIsCacheCade 1.3.6.1.4.1.674.10893.1.20.140.1.1.25
Indicates if this virtual disk is configured as CacheCade. Value: 1 - Yes, 0 - No, 99 - Undetermined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskDiskCachePolicy 1.3.6.1.4.1.674.10893.1.20.140.1.1.26
Indicates disk cache policy of the logical device. Value: 1 - Enabled, 2 - Disabled, 99 - Undetermined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskAssociatedFluidCacheStatus 1.3.6.1.4.1.674.10893.1.20.140.1.1.27
Indicates the status of the associated fluid cache status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskPIEnable 1.3.6.1.4.1.674.10893.1.20.140.1.1.28
Indicates if T10 PI is enabled on a virtual disk. Possible values are: 0 (T10 PI disabled) or 1 (T10 PI enabled).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskPartitionTable 1.3.6.1.4.1.674.10893.1.20.140.2
A table of managed Virtual Disk Partitions. The number of entries is related to number of partitions discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualDiskPartitionEntry

virtualDiskPartitionEntry 1.3.6.1.4.1.674.10893.1.20.140.2.1
An entry in the Virtual Disk Partition table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VirtualDiskPartitionEntry  

virtualDiskPartitionNumber 1.3.6.1.4.1.674.10893.1.20.140.2.1.1
Instance number of this partition entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

virtualDiskPartitionDeviceName 1.3.6.1.4.1.674.10893.1.20.140.2.1.2
Device name of the partition given by the operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

virtualDiskPartitionState 1.3.6.1.4.1.674.10893.1.20.140.2.1.3
State of the partition. This is mapped stated of the associate virtual disk. 1: Active - Mapped cache disk is working fine 2: No - Fluid caching is not enabled 3: Removing - This is a transient stage duing the process of disabling the cache 4: Failed - Mapped cache disk has failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), no(2), removing(3), failed(4)  

virtualDiskPartitionSize 1.3.6.1.4.1.674.10893.1.20.140.2.1.4
Size of the Partition in GB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskPartitionFluidCacheStatus 1.3.6.1.4.1.674.10893.1.20.140.2.1.5
Indicates if the partition has associated fluidcache
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

virtualDiskPartitionNexusID 1.3.6.1.4.1.674.10893.1.20.140.2.1.6
Durable unique ID for this partition. This comprises the controllerID, virtualDisk ID and hash mapped WWN number of this partition
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fluidCacheTable 1.3.6.1.4.1.674.10893.1.20.140.4
A table of managed FluidCache. The number of entries is related to FluidCache discovered in the system. The maximum number of entries is implementation dependent. Note: The properties in this table may not be applicable to all entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FluidCacheEntry

fluidCacheEntry 1.3.6.1.4.1.674.10893.1.20.140.4.1
An entry in the Fluid Cache table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FluidCacheEntry  

fluidCacheNumber 1.3.6.1.4.1.674.10893.1.20.140.4.1.1
Instance number of this fluid cache entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

fluidCacheName 1.3.6.1.4.1.674.10893.1.20.140.4.1.2
The name of the fluidcache in this subsystem as represented in Storage Management.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseState 1.3.6.1.4.1.674.10893.1.20.140.4.1.3
License state of the associated fluid cache subsystem
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseValidity 1.3.6.1.4.1.674.10893.1.20.140.4.1.4
This entry displays the number of days the fluid cache license is valid. It has to be read in parallel to license type. Incase of site wide license, value '0' should be read as 'Not Applicable'
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fluidCacheLicenseEntitlementID 1.3.6.1.4.1.674.10893.1.20.140.4.1.5
Indiactes the Entitlement Identifier for the license of the fluid cache subsystem
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseDuration 1.3.6.1.4.1.674.10893.1.20.140.4.1.6
Indicates the duration of the the license validity
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseCapacity 1.3.6.1.4.1.674.10893.1.20.140.4.1.7
Indicates the capacity of the license of fluidcache subsystem
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseRemaining 1.3.6.1.4.1.674.10893.1.20.140.4.1.8
Indicates the remaining days of the license validity
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseType 1.3.6.1.4.1.674.10893.1.20.140.4.1.9
Indicates the type of the license of the fluidcache subsystem
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseVendor 1.3.6.1.4.1.674.10893.1.20.140.4.1.10
Indicates the license vendor for the fluidcache subsystem
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseProductId 1.3.6.1.4.1.674.10893.1.20.140.4.1.11
Indicates the product ID of the license of the fluidcache susbsytem
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseDateSold 1.3.6.1.4.1.674.10893.1.20.140.4.1.12
Indicates the date on which the license for the fluidcache subsystem is sold
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseGeneration 1.3.6.1.4.1.674.10893.1.20.140.4.1.13
Indicates the generation of the license for the fluidcache subsystem
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseFeatureID 1.3.6.1.4.1.674.10893.1.20.140.4.1.14
Indicates the license feature ID of the fluidcache subsystem
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheLicenseFeatureDescription 1.3.6.1.4.1.674.10893.1.20.140.4.1.15
Provides the description of the license feature of fluidcache subsystem
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheNexus 1.3.6.1.4.1.674.10893.1.20.140.4.1.16
Indicates the unique ID of the fludicache component
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheDiskTable 1.3.6.1.4.1.674.10893.1.20.140.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FluidCacheDiskEntry

fluidCacheDiskEntry 1.3.6.1.4.1.674.10893.1.20.140.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FluidCacheDiskEntry  

fluidCacheDiskNumber 1.3.6.1.4.1.674.10893.1.20.140.5.1.1
Instance number of the fluidCacheDisk entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

fluidCacheDiskName 1.3.6.1.4.1.674.10893.1.20.140.5.1.2
Name of the Fluid Cache Disk Name as seen by storage management
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheDiskState 1.3.6.1.4.1.674.10893.1.20.140.5.1.3
State of the FluidCacheDisk entry Valid values are 2 - Active, otherwise Inactive
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fluidCacheDiskBackendDeviceType 1.3.6.1.4.1.674.10893.1.20.140.5.1.4
This displays the type of the backend device beneath the fluid cache disk. Values are as below 773 denotes VirtualDisk 791 denotes Partition
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fluidCacheDiskBackendDeviceName 1.3.6.1.4.1.674.10893.1.20.140.5.1.5
Device name of the backend device as seen by the operating system
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCacheDiskBackendDeviceSize 1.3.6.1.4.1.674.10893.1.20.140.5.1.6
Size of the Backend device. Size is indicated in GB
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fluidCacheDiskOperatingMode 1.3.6.1.4.1.674.10893.1.20.140.5.1.7
Operating mode of the FluidCache. Values are 0 - Writeback mode 1 - Writethrough mode 2 - PassThrough mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fluidCacheDiskConfiguredMode 1.3.6.1.4.1.674.10893.1.20.140.5.1.8
Configured Mode of the FluidCache. The values are 0 - Writeback mode 1 - Writethrough mode 2 - PassThrough mode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fluidCacheDiskNexus 1.3.6.1.4.1.674.10893.1.20.140.5.1.9
Durable Unique ID of the fluidcache disk
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

fluidCacheDiskStatus 1.3.6.1.4.1.674.10893.1.20.140.5.1.10
Severity of the fluid cache disk state. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fluidCachePoolTable 1.3.6.1.4.1.674.10893.1.20.140.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FluidCachePoolEntry

fluidCachePoolEntry 1.3.6.1.4.1.674.10893.1.20.140.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FluidCachePoolEntry  

fluidCachePoolNumber 1.3.6.1.4.1.674.10893.1.20.140.6.1.1
Instance number of the fluid cachepool entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

fluidCachePoolStoreCount 1.3.6.1.4.1.674.10893.1.20.140.6.1.2
Number of flash devices that are part of the fluidcache pool
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fluidCachePoolUUID 1.3.6.1.4.1.674.10893.1.20.140.6.1.3
UUID of the fluidcache pool
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCachePoolLicenseState 1.3.6.1.4.1.674.10893.1.20.140.6.1.4
State of the fluid cache license. Possible values: Valid, Evaluation, Expired
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fluidCachePoolSize 1.3.6.1.4.1.674.10893.1.20.140.6.1.5
Size of the fluidcache pool in GiB
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fluidCachePoolHighAvailabilityState 1.3.6.1.4.1.674.10893.1.20.140.6.1.6
Indicates if the fluidcache pool is operating in high availability mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCachePoolNexus 1.3.6.1.4.1.674.10893.1.20.140.6.1.7
Durable unique ID of the fluidcache pool entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fluidCachePoolStatus 1.3.6.1.4.1.674.10893.1.20.140.6.1.8
Severity of the fluid cache pool table state. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

storageManagementEvent 1.3.6.1.4.1.674.10893.1.20.200
OBJECT IDENTIFIER    

messageIDEvent 1.3.6.1.4.1.674.10893.1.20.200.1
0200.0001 Storage Management alert (event) message number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

descriptionEvent 1.3.6.1.4.1.674.10893.1.20.200.2
0200.0002 Storage Management event message text describing the alert.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

locationEvent 1.3.6.1.4.1.674.10893.1.20.200.3
0200.0003 Additional information identifying the location of the object causing the alert.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

objectNameEvent 1.3.6.1.4.1.674.10893.1.20.200.4
0200.0004 Name of the object as represented in Storage Management causing the alert.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

objectOIDEvent 1.3.6.1.4.1.674.10893.1.20.200.5
0200.0005 MIB OID of the object causing the alert.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

objectNexusEvent 1.3.6.1.4.1.674.10893.1.20.200.6
0200.0006 Durable, unique ID of the object causing the alert.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

currentStatusEvent 1.3.6.1.4.1.674.10893.1.20.200.7
0200.0007 Current status of object causing the alert, if applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

previousStatusEvent 1.3.6.1.4.1.674.10893.1.20.200.8
0200.0008 Previous status of object causing the alert if applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DellStatus  

enhancedMessageIDEvent 1.3.6.1.4.1.674.10893.1.20.200.9
0200.0001 Enhanced Storage Management Message ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

systemFQDNEvent 1.3.6.1.4.1.674.10893.1.20.200.10
0200.0008 System FQDN of object causing the alert if applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

serviceTagEvent 1.3.6.1.4.1.674.10893.1.20.200.11
0200.0008 Service Tag of object causing the alert if applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

chassisServiceTagEvent 1.3.6.1.4.1.674.10893.1.20.200.12
0200.0008 Chassis Service Tag of object causing the alert if applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

alertStorageManagementInformation 101
Storage Management Information There is no global status change associated with this trap.
TRAP-TYPE    

alertStorageManagementNormal 102
There is no global status change associated with this trap.
TRAP-TYPE    

alertStorageManagementWarning 103
Storage Management has detected a device independent warning condition. There is no global status change associated with this trap.
TRAP-TYPE    

alertStorageManagementFailure 104
Storage Management has detected a device independent error condition. There is no global status change associated with this trap.
TRAP-TYPE    

alertStorageManagementNonRecoverable 105
Storage Management has detected a device independent non-recoverable condition. There is no global status change associated with this trap.
TRAP-TYPE    

alertControllerInformation 751
Controller information.
TRAP-TYPE    

alertControllerNormal 752
Controller has returned to normal.
TRAP-TYPE    

alertControllerWarning 753
Controller warning.
TRAP-TYPE    

alertControllerFailure 754
Controller failure.
TRAP-TYPE    

alertControllerNonRecoverable 755
Controller is non-recoverable.
TRAP-TYPE    

alertChannelInformation 801
Channel information.
TRAP-TYPE    

alertChannelNormal 802
Channel has returned to normal.
TRAP-TYPE    

alertChannelWarning 803
Channel warning.
TRAP-TYPE    

alertChannelFailure 804
Channel failure.
TRAP-TYPE    

alertChannelNonRecoverable 805
Channel is non-recoverable.
TRAP-TYPE    

alertEnclosureInformation 851
Enclosure information.
TRAP-TYPE    

alertEnclosureNormal 852
Enclosure has returned to normal.
TRAP-TYPE    

alertEnclosureWarning 853
Enclosure warning.
TRAP-TYPE    

alertEnclosureFailure 854
Enclosure failure.
TRAP-TYPE    

alertEnclosureNonRecoverable 855
Enclosure is non-recoverable.
TRAP-TYPE    

alertArrayDiskInformation 901
Array disk information.
TRAP-TYPE    

alertArrayDiskNormal 902
Array disk has returned to normal.
TRAP-TYPE    

alertArrayDiskWarning 903
Array disk warning.
TRAP-TYPE    

alertArrayDiskFailure 904
Array disk failure.
TRAP-TYPE    

alertArrayDiskNonRecoverable 905
Array disk is non-recoverable.
TRAP-TYPE    

alertEMMInformation 951
EMM information.
TRAP-TYPE    

alertEMMNormal 952
EMM has returned to normal.
TRAP-TYPE    

alertEMMWarning 953
EMM warning.
TRAP-TYPE    

alertEMMFailure 954
EMM failure.
TRAP-TYPE    

alertEMMNonRecoverable 955
EMM is non-recoverable.
TRAP-TYPE    

alertPowerSupplyInformation 1001
Power supply information.
TRAP-TYPE    

alertPowerSupplyNormal 1002
Power supply has returned to normal.
TRAP-TYPE    

alertPowerSupplyWarning 1003
Power supply warning.
TRAP-TYPE    

alertPowerSupplyFailure 1004
Power supply failure.
TRAP-TYPE    

alertPowerSupplyNonRecoverable 1005
Power supply is non-recoverable.
TRAP-TYPE    

alertTemperatureProbeInformation 1051
Temperature probe information.
TRAP-TYPE    

alertTemperatureProbeNormal 1052
Temperature probe has returned to normal.
TRAP-TYPE    

alertTemperatureProbeWarning 1053
Temperature probe warning.
TRAP-TYPE    

alertTemperatureProbeFailure 1054
Temperature probe failure.
TRAP-TYPE    

alertTemperatureProbeNonRecoverable 1055
Temperature probe is non-recoverable.
TRAP-TYPE    

alertFanInformation 1101
Fan information.
TRAP-TYPE    

alertFanNormal 1102
Fan has returned to normal.
TRAP-TYPE    

alertFanWarning 1103
Fan warning.
TRAP-TYPE    

alertFanFailure 1104
Fan failure.
TRAP-TYPE    

alertFanNonRecoverable 1105
Fan is non-recoverable.
TRAP-TYPE    

alertBatteryInformation 1151
Battery information.
TRAP-TYPE    

alertBatteryNormal 1152
Battery has returned to normal.
TRAP-TYPE    

alertBatteryWarning 1153
Battery warning.
TRAP-TYPE    

alertBatteryFailure 1154
Battery failure.
TRAP-TYPE    

alertBatteryNonRecoverable 1155
Battery is non-recoverable.
TRAP-TYPE    

alertVirtualDiskInformation 1201
Virtual disk information.
TRAP-TYPE    

alertVirtualDiskNormal 1202
Virtual disk has returned to normal.
TRAP-TYPE    

alertVirtualDiskWarning 1203
Virtual disk warning.
TRAP-TYPE    

alertVirtualDiskFailure 1204
Virtual disk failure.
TRAP-TYPE    

alertVirtualDiskNonRecoverable 1205
Virtual disk is non-recoverable.
TRAP-TYPE    

alertRedundancyNormal 1304
Redundancy has returned to normal.
TRAP-TYPE    

alertRedundancyDegraded 1305
Redundancy has been degraded.
TRAP-TYPE    

alertRedundancyLost 1306
Redundancy has been lost.
TRAP-TYPE    

alertFluidCacheDiskInformation 1401
Fluid Cache Disk Information
TRAP-TYPE    

alertfluidCacheDiskWarning 1403
Fluid Cache Disk warning.
TRAP-TYPE    

alertFluidCacheDisklFailure 1404
Fluid Cache Disk failure.
TRAP-TYPE    

alertVirtualDiskPartitionInformation 1501
Virtual Disk Partition Information
TRAP-TYPE    

alertVirtualDiskPartitionWarning 1503
Virtual Disk Partition warning.
TRAP-TYPE    

alertVirtualDiskPartitionFailure 1504
Virtual Disk Partition failure.
TRAP-TYPE    

alertFluidCacheInformation 1601
Fluid Cache Information
TRAP-TYPE    

alertfluidCacheWarning 1603
Fluid Cache warning.
TRAP-TYPE    

alertFluidCacheFailure 1604
Fluid Cache failure.
TRAP-TYPE    

alertFluidCachePoolInformation 1701
Fluid Cache Pool Information
TRAP-TYPE    

alertfluidCachePoolWarning 1703
Fluid Cache Pool warning.
TRAP-TYPE    

alertFluidCachePoolFailure 1704
Fluid Cache Pool failure.
TRAP-TYPE    

alertEEMIStorageManagementInformation 10100
Storage Management Information There is no global status change associated with this trap.
TRAP-TYPE    

alertEEMIStorageManagementNormal 10200
There is no global status change associated with this trap.
TRAP-TYPE    

alertEEMIStorageManagementWarning 10300
Storage Management has detected a device independent warning condition. There is no global status change associated with this trap.
TRAP-TYPE    

alertEEMIStorageManagementFailure 10400
Storage Management has detected a device independent error condition. There is no global status change associated with this trap.
TRAP-TYPE    

alertEEMIStorageManagementNonRecoverable 10500
Storage Management has detected a device independent non-recoverable condition. There is no global status change associated with this trap.
TRAP-TYPE    

alertEEMIControllerInformation 75100
Controller information.
TRAP-TYPE    

alertEEMIControllerNormal 75200
Controller has returned to normal.
TRAP-TYPE    

alertEEMIControllerWarning 75300
Controller warning.
TRAP-TYPE    

alertEEMIControllerFailure 75400
Controller failure.
TRAP-TYPE    

alertEEMIControllerNonRecoverable 75500
Controller is non-recoverable.
TRAP-TYPE    

alertEEMIChannelInformation 80100
Channel information.
TRAP-TYPE    

alertEEMIChannelNormal 80200
Channel has returned to normal.
TRAP-TYPE    

alertEEMIChannelWarning 80300
Channel warning.
TRAP-TYPE    

alertEEMIChannelFailure 80400
Channel failure.
TRAP-TYPE    

alertEEMIChannelNonRecoverable 80500
Channel is non-recoverable.
TRAP-TYPE    

alertEEMIEnclosureInformation 85100
Enclosure information.
TRAP-TYPE    

alertEEMIEnclosureNormal 85200
Enclosure has returned to normal.
TRAP-TYPE    

alertEEMIEnclosureWarning 85300
Enclosure warning.
TRAP-TYPE    

alertEEMIEnclosureFailure 85400
Enclosure failure.
TRAP-TYPE    

alertEEMIEnclosureNonRecoverable 85500
Enclosure is non-recoverable.
TRAP-TYPE    

alertEEMIArrayDiskInformation 90100
Array disk information.
TRAP-TYPE    

alertEEMIArrayDiskNormal 90200
Array disk has returned to normal.
TRAP-TYPE    

alertEEMIArrayDiskWarning 90300
Array disk warning.
TRAP-TYPE    

alertEEMIArrayDiskFailure 90400
Array disk failure.
TRAP-TYPE    

alertEEMIArrayDiskNonRecoverable 90500
Array disk is non-recoverable.
TRAP-TYPE    

alertEMMEMMInformation 95100
EMM information.
TRAP-TYPE    

alertEEMIEMMNormal 95200
EMM has returned to normal.
TRAP-TYPE    

alertEEMIEMMWarning 95300
EMM warning.
TRAP-TYPE    

alertEEMIEMMFailure 95400
EMM failure.
TRAP-TYPE    

alertEEMIEMMNonRecoverable 95500
EMM is non-recoverable.
TRAP-TYPE    

alertEEMIPowerSupplyInformation 100100
Power supply information.
TRAP-TYPE    

alertEEMIPowerSupplyNormal 100200
Power supply has returned to normal.
TRAP-TYPE    

alertEEMIPowerSupplyWarning 100300
Power supply warning.
TRAP-TYPE    

alertEEMIPowerSupplyFailure 100400
Power supply failure.
TRAP-TYPE    

alertEEMIPowerSupplyNonRecoverable 100500
Power supply is non-recoverable.
TRAP-TYPE    

alertEEMITemperatureProbeInformation 105100
Temperature probe information.
TRAP-TYPE    

alertEEMITemperatureProbeNormal 105200
Temperature probe has returned to normal.
TRAP-TYPE    

alertEEMITemperatureProbeWarning 105300
Temperature probe warning.
TRAP-TYPE    

alertEEMITemperatureProbeFailure 105400
Temperature probe failure.
TRAP-TYPE    

alertEEMITemperatureProbeNonRecoverable 105500
Temperature probe is non-recoverable.
TRAP-TYPE    

alertEEMIFanInformation 110100
Fan information.
TRAP-TYPE    

alertEEMIFanNormal 110200
Fan has returned to normal.
TRAP-TYPE    

alertEEMIFanWarning 110300
Fan warning.
TRAP-TYPE    

alertEEMIFanFailure 110400
Fan failure.
TRAP-TYPE    

alertEEMIFanNonRecoverable 110500
Fan is non-recoverable.
TRAP-TYPE    

alertEEMIBatteryInformation 115100
Battery information.
TRAP-TYPE    

alertEEMIBatteryNormal 115200
Battery has returned to normal.
TRAP-TYPE    

alertEEMIBatteryWarning 115300
Battery warning.
TRAP-TYPE    

alertEEMIBatteryFailure 115400
Battery failure.
TRAP-TYPE    

alertEEMIBatteryNonRecoverable 115500
Battery is non-recoverable.
TRAP-TYPE    

alertEEMIVirtualDiskInformation 120100
Virtual disk information.
TRAP-TYPE    

alertEEMIVirtualDiskNormal 120200
Virtual disk has returned to normal.
TRAP-TYPE    

alertEEMIVirtualDiskWarning 120300
Virtual disk warning.
TRAP-TYPE    

alertEEMIVirtualDiskFailure 120400
Virtual disk failure.
TRAP-TYPE    

alertEEMIVirtualDiskNonRecoverable 120500
Virtual disk is non-recoverable.
TRAP-TYPE    

alertEEMIRedundancyNormal 130400
Redundancy has returned to normal.
TRAP-TYPE    

alertEEMIRedundancyDegraded 130500
Redundancy has been degraded.
TRAP-TYPE    

alertEEMIRedundancyLost 130600
Redundancy has been lost.
TRAP-TYPE    

alertEEMIFluidCacheDiskInformation 140100
Fluid Cache Disk Information
TRAP-TYPE    

alertEEMIfluidCacheDiskWarning 140300
Fluid Cache Disk warning.
TRAP-TYPE    

alertEEMIFluidCacheDisklFailure 140400
Fluid Cache Disk failure.
TRAP-TYPE    

alertEEMIVirtualDiskPartitionInformation 150100
Virtual Disk Partition Information
TRAP-TYPE    

alertEEMIVirtualDiskPartitionWarning 150300
Virtual Disk Partition warning.
TRAP-TYPE    

alertEEMIVirtualDiskPartitionFailure 150400
Virtual Disk Partition failure.
TRAP-TYPE    

alertEEMIFluidCacheInformation 160100
Fluid Cache Information
TRAP-TYPE    

alertEEMIfluidCacheWarning 160300
Fluid Cache warning.
TRAP-TYPE    

alertEEMIFluidCacheFailure 160400
Fluid Cache failure.
TRAP-TYPE    

alertEEMIFluidCachePoolInformation 170100
Fluid Cache Pool Information
TRAP-TYPE    

alertEEMIfluidCachePoolWarning 170300
Fluid Cache Pool warning.
TRAP-TYPE    

alertEEMIFluidCachePoolFailure 170400
Fluid Cache Pool failure.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor