TIMETRA-ATM-MIB

File: TIMETRA-ATM-MIB.mib (147392 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB ATM-MIB ATM-TC-MIB
TIMETRA-GLOBAL-MIB TIMETRA-CHASSIS-MIB TIMETRA-CONN-PROF-MIB

Imported symbols

Integer32 MODULE-IDENTITY OBJECT-TYPE
Counter32 Counter64 Unsigned32
NOTIFICATION-TYPE RowStatus TimeStamp
TEXTUAL-CONVENTION MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP ifIndex atmInterfaceConfEntry
atmVclEntry atmVclVpi atmVclVci
aal5VccEntry atmVplEntry atmVplVpi
atmInterfaceTCAlarmState atmInterfaceDs3PlcpAlarmState atmInterfaceCurrentMaxVpiBits
atmInterfaceCurrentMaxVciBits atmInterfaceMaxActiveVpiBits atmInterfaceMaxActiveVciBits
atmInterfaceConfVccs atmInterfaceConfVpcs atmInterfaceTCEntry
AtmVpIdentifier AtmVcIdentifier AtmConnKind
AtmConnCastType AtmTrafficDescrParamIndex AtmVorXAdminStatus
AtmVorXOperStatus AtmVorXLastChange timetraSRMIBModules
tmnxSRObjs tmnxSRNotifyPrefix tmnxSRConfs
tmnxChassisIndex tmnxCardSlotNum tmnxMDASlotNum
tmnxConnProfId

Defined Types

AtmConnectionOwner  
This texual convention identifies the system entity that owns a specific ATM connection.
TEXTUAL-CONVENTION    
  INTEGER sap(1), ilmi(2)  

AtmOamStatus  
This texual convention indicates the OAM operational status of ATM connections. Ete indicates end to end connection. Ais denotes alarm indication signal and Rdi is for remote defect indication. Loc indicates the alarm was due to loss of continuity.
TEXTUAL-CONVENTION    
  INTEGER up(1), eteAis(2), eteRdi(3), eteAisLoc(4)  

AtmIlmiStatus  
This textual convention indicates the ILMI status of the VCL or VPL. If through ILMI an operational condition or misconfiguration has been detected, tAtmVclInfoIlmiStatus or tAtmVplInfoIlmiStatus will reflect this condition.
TEXTUAL-CONVENTION    
  INTEGER undefined(0), ok(1), vpiOrVciRangeConflict(2)  

AtmLlid  
This texual convention is the 16 octets that identifies the system Loopback location Id (LLID). As required by the ATM OAM Loopback capability. This texual convention is defined in ITU-T standard I.610.
TEXTUAL-CONVENTION    
  OCTET STRING Size(16)  

AtmIlmiLinkUniType  
AtmIlmiLinkUniType is an enumerated integer whose value indicates ATM UNI type.
TEXTUAL-CONVENTION    
  INTEGER undefined(0), public(1), private(2)  

AtmIlmiLinkDeviceType  
AtmIlmiLinkDeviceType is an enumerated integer whose value indicates the advertised device type.
TEXTUAL-CONVENTION    
  INTEGER undefined(0), user(1), node(2)  

AtmIlmiLinkVersion  
AtmIlmiLinkVersion is an enumerated integer whose value indicates the ILMI version of either `3.0', `3.1' or `4.0' that is advertised by IME.
TEXTUAL-CONVENTION    
  INTEGER undefined(0), version3point1(1), version4point0(2), version3point0(3)  

AtmIlmiLinkImeType  
AtmIlmiLinkImeType is an enumerated integer whose value indicates the ILMI IME type of either `User-Side' or `Network-Side'.
TEXTUAL-CONVENTION    
  INTEGER userside(1), networkside(2)  

TAtmMdaInfoEntry  
SEQUENCE    
  tAtmMdaMaxSupportedVpcs INTEGER
  tAtmMdaMaxSupportedVccs INTEGER
  tAtmMdaConfiguredVpcs INTEGER
  tAtmMdaConfiguredVccs INTEGER

TAtmIntfConfEntry  
SEQUENCE    
  tAtmIntfCurrentMaxVpcs INTEGER
  tAtmIntfCurrentMaxVccs INTEGER
  tAtmIntfTotalIngrCbrBandwidth Unsigned32
  tAtmIntfTotalIngrRtVbrBandwidth Unsigned32
  tAtmIntfTotalIngrNrtVbrBandwidth Unsigned32
  tAtmIntfTotalIngrUbrBandwidth Unsigned32
  tAtmIntfTotalEgrCbrBandwidth Unsigned32
  tAtmIntfTotalEgrRtVbrBandwidth Unsigned32
  tAtmIntfTotalEgrNrtVbrBandwidth Unsigned32
  tAtmIntfTotalEgrUbrBandwidth Unsigned32
  tAtmIntfBandwidth Unsigned32
  tAtmIntfShapedBandwidth Unsigned32
  tAtmIntfLastUnknVpi AtmVpIdentifier
  tAtmIntfLastUnknVci AtmVcIdentifier
  tAtmIntfOperStatus INTEGER
  tAtmIntfConfVtcs INTEGER
  tAtmIntfConfIfcs INTEGER

TAtmIntfStatsEntry  
SEQUENCE    
  tAtmIntfStatsTotalCellsRxd Counter64
  tAtmIntfStatsTotalCellsTxd Counter64
  tAtmIntfStatsTotalBytesRxd Counter64
  tAtmIntfStatsTotalBytesTxd Counter64
  tAtmIntfStatsTotalUnknCellsDrp Counter32
  tAtmIntfStatsTotalHecErr Counter32
  tAtmIntfStatsTotalHecErrFixed Counter32

TAtmIntfAal5StatsEntry  
SEQUENCE    
  tAtmIntfAal5StatsTotalPktsRxd Counter64
  tAtmIntfAal5StatsTotalPktsTxd Counter64
  tAtmIntfAal5StatsTotalPktsDrpRxd Counter64
  tAtmIntfAal5StatsTotalPktsDrpTxd Counter64
  tAtmIntfAal5StatsTotalCrc32Err Counter64

TAtmIfcInfoEntry  
SEQUENCE    
  tAtmIfcAdminStatus AtmVorXAdminStatus
  tAtmIfcOperStatus AtmVorXOperStatus
  tAtmIfcLastChange AtmVorXLastChange
  tAtmIfcReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  tAtmIfcTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  tAtmIfcRowStatus RowStatus
  tAtmIfcCastType AtmConnCastType
  tAtmIfcConnKind AtmConnKind
  tAtmIfcInfoOwner AtmConnectionOwner

TAtmIfcStatisticsEntry  
SEQUENCE    
  tAtmIfcStatsTotalCellsRxd Counter64
  tAtmIfcStatsTotalClp0CellsRxd Counter64
  tAtmIfcStatsTotalCellsTxd Counter64
  tAtmIfcStatsTotalClp0CellsTxd Counter64
  tAtmIfcStatsTotalBytesRxd Counter64
  tAtmIfcStatsTotalBytesTxd Counter64
  tAtmIfcStatsDrpCellsRxd Counter32
  tAtmIfcStatsDrpClp0CellsRxd Counter32
  tAtmIfcStatsDrpClp0CellsTxd Counter32
  tAtmIfcStatsTagCells Counter32

TAtmVclInfoEntry  
SEQUENCE    
  tAtmVclInfoOwner AtmConnectionOwner
  tAtmVclInfoOamStatus AtmOamStatus
  tAtmVclInfoIlmiStatus AtmIlmiStatus
  tAtmVclInfoRxTrafficDescrIdOvr AtmTrafficDescrParamIndex
  tAtmVclInfoTxTrafficDescrIdOvr AtmTrafficDescrParamIndex

TAtmVclStatisticsEntry  
SEQUENCE    
  tAtmVclStatsTotalCellsRxd Counter64
  tAtmVclStatsTotalCellsTxd Counter64
  tAtmVclStatsTotalBytesRxd Counter64
  tAtmVclStatsTotalBytesTxd Counter64

TAtmOamVclStatisticsEntry  
SEQUENCE    
  tAtmOamVclStatsAISCellsTxd Counter32
  tAtmOamVclStatsRDICellsTxd Counter32
  tAtmOamVclStatsLoopbackCellsTxd Counter32
  tAtmOamVclStatsAISCellsRxd Counter32
  tAtmOamVclStatsRDICellsRxd Counter32
  tAtmOamVclStatsLoopbackCellsRxd Counter32
  tAtmOamVclStatsCrc10Err Counter32
  tAtmOamVclStatsOtherCellsRxd Counter32

TAal5VccStatisticsEntry  
SEQUENCE    
  tAal5VccStatsPacketsRxd Counter64
  tAal5VccStatsPacketsTxd Counter64
  tAal5VccStatsDrpPacketsRxd Counter64
  tAal5VccStatsDrpPacketsTxd Counter64

TAtmCellVclStatisticsEntry  
SEQUENCE    
  tAtmCellVclStatsClp0CellsRxd Counter64
  tAtmCellVclStatsClp0CellsTxd Counter64
  tAtmCellVclStatsDrpCellsRxd Counter32
  tAtmCellVclStatsDrpClp0CellsRxd Counter32
  tAtmCellVclStatsDrpClp0CellsTxd Counter32
  tAtmCellVclStatsTagCells Counter32

TAtmVplInfoEntry  
SEQUENCE    
  tAtmVplInfoOwner AtmConnectionOwner
  tAtmVplInfoOamStatus AtmOamStatus
  tAtmVplInfoIlmiStatus AtmIlmiStatus

TAtmVplStatisticsEntry  
SEQUENCE    
  tAtmVplStatsTotalCellsRxd Counter64
  tAtmVplStatsTotalClp0CellsRxd Counter64
  tAtmVplStatsTotalCellsTxd Counter64
  tAtmVplStatsTotalClp0CellsTxd Counter64
  tAtmVplStatsTotalBytesRxd Counter64
  tAtmVplStatsTotalBytesTxd Counter64
  tAtmVplStatsDrpCellsRxd Counter32
  tAtmVplStatsDrpClp0CellsRxd Counter32
  tAtmVplStatsDrpClp0CellsTxd Counter32
  tAtmVplStatsTagCells Counter32

TAtmOamVplStatisticsEntry  
SEQUENCE    
  tAtmOamVplStatsAISCellsTxd Counter32
  tAtmOamVplStatsRDICellsTxd Counter32
  tAtmOamVplStatsLoopbackCellsTxd Counter32
  tAtmOamVplStatsAISCellsRxd Counter32
  tAtmOamVplStatsRDICellsRxd Counter32
  tAtmOamVplStatsLoopbackCellsRxd Counter32
  tAtmOamVplStatsCrc10Errors Counter32
  tAtmOamVplStatsOtherCellsRxd Counter32

TAtmVtlInfoEntry  
SEQUENCE    
  tAtmVtlStartVpi AtmVpIdentifier
  tAtmVtlEndVpi AtmVpIdentifier
  tAtmVtlAdminStatus AtmVorXAdminStatus
  tAtmVtlOperStatus AtmVorXOperStatus
  tAtmVtlLastChange AtmVorXLastChange
  tAtmVtlReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  tAtmVtlTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  tAtmVtlRowStatus RowStatus
  tAtmVtlCastType AtmConnCastType
  tAtmVtlConnKind AtmConnKind
  tAtmVtlInfoOwner AtmConnectionOwner

TAtmVtlStatisticsEntry  
SEQUENCE    
  tAtmVtlStatsTotalCellsRxd Counter64
  tAtmVtlStatsTotalClp0CellsRxd Counter64
  tAtmVtlStatsTotalCellsTxd Counter64
  tAtmVtlStatsTotalClp0CellsTxd Counter64
  tAtmVtlStatsTotalBytesRxd Counter64
  tAtmVtlStatsTotalBytesTxd Counter64
  tAtmVtlStatsDrpCellsRxd Counter32
  tAtmVtlStatsDrpClp0CellsRxd Counter32
  tAtmVtlStatsDrpClp0CellsTxd Counter32
  tAtmVtlStatsTagCells Counter32

TAtmIlmiLinkEntry  
SEQUENCE    
  tAtmIlmiLinkRowStatus RowStatus
  tAtmIlmiLinkLastChanged TimeStamp
  tAtmIlmiLinkAdminStatus INTEGER
  tAtmIlmiLinkOperStatus INTEGER
  tAtmIlmiLinkVpi AtmVpIdentifier
  tAtmIlmiLinkVci AtmVcIdentifier
  tAtmIlmiLinkFsmState INTEGER
  tAtmIlmiLinkReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  tAtmIlmiLinkTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  tAtmIlmiLinkEstablishConPollIntvl Integer32
  tAtmIlmiLinkCheckConPollIntvl Integer32
  tAtmIlmiLinkConPollInactFactor Integer32
  tAtmIlmiLinkUniType AtmIlmiLinkUniType
  tAtmIlmiLinkDeviceType AtmIlmiLinkDeviceType
  tAtmIlmiLinkVersion AtmIlmiLinkVersion
  tAtmIlmiLinkImeType AtmIlmiLinkImeType
  tAtmIlmiLinkNegotiatedVersion AtmIlmiLinkVersion
  tAtmIlmiLinkNegotiatedImeType AtmIlmiLinkImeType
  tAtmIlmiLinkNeighborIfIdentifier INTEGER
  tAtmIlmiLinkNeighborSystemIdentifier OCTET STRING
  tAtmIlmiLinkNeighborUniType AtmIlmiLinkUniType
  tAtmIlmiLinkNeighborDeviceType AtmIlmiLinkDeviceType
  tAtmIlmiLinkNeighborVersion AtmIlmiLinkVersion
  tAtmIlmiLinkNeighborMaxVpcs INTEGER
  tAtmIlmiLinkNeighborMaxVccs INTEGER
  tAtmIlmiLinkNeighborMaxVpiBits INTEGER
  tAtmIlmiLinkNeighborMaxVciBits INTEGER

TAtmIlmiLinkStatisticsEntry  
SEQUENCE    
  tAtmIlmiLinkOutPdus Counter32
  tAtmIlmiLinkOutGetRequestPdus Counter32
  tAtmIlmiLinkOutGetNextRequestPdus Counter32
  tAtmIlmiLinkOutSetRequestPdus Counter32
  tAtmIlmiLinkOutGetResponsePdus Counter32
  tAtmIlmiLinkOutTrapPdus Counter32
  tAtmIlmiLinkOutTooBigErrors Counter32
  tAtmIlmiLinkOutNoSuchNameErrors Counter32
  tAtmIlmiLinkOutBadValueErrors Counter32
  tAtmIlmiLinkOutReadOnlyErrors Counter32
  tAtmIlmiLinkOutGeneralErrors Counter32
  tAtmIlmiLinkInPdus Counter32
  tAtmIlmiLinkInGetRequestPdus Counter32
  tAtmIlmiLinkInGetNextRequestPdus Counter32
  tAtmIlmiLinkInSetRequestPdus Counter32
  tAtmIlmiLinkInGetResponsePdus Counter32
  tAtmIlmiLinkInTrapPdus Counter32
  tAtmIlmiLinkInTooBigErrors Counter32
  tAtmIlmiLinkInNoSuchNameErrors Counter32
  tAtmIlmiLinkInBadValueErrors Counter32
  tAtmIlmiLinkInReadOnlyErrors Counter32
  tAtmIlmiLinkInGeneralErrors Counter32
  tAtmIlmiLinkInInvalidSnmpVersionPdus Counter32
  tAtmIlmiLinkInInvalidSnmpCommunityStringPdus Counter32
  tAtmIlmiLinkInInvalidSnmpFormatPdus Counter32

TAtmTCSublayerEntry  
SEQUENCE    
  tAtmTCSublayerHecErrors Counter32
  tAtmTCSublayerHecErrorsFixed Counter32

TAtmCpStatisticsEntry  
SEQUENCE    
  tAtmCpStatsTotalCellsRxd Counter64
  tAtmCpStatsTotalCellsRxdLo Counter32
  tAtmCpStatsTotalCellsRxdHi Counter32
  tAtmCpStatsTotalCellsTxd Counter64
  tAtmCpStatsTotalCellsTxdLo Counter32
  tAtmCpStatsTotalCellsTxdHi Counter32
  tAtmCpStatsClp0CellsRxd Counter64
  tAtmCpStatsClp0CellsRxdLo Counter32
  tAtmCpStatsClp0CellsRxdHi Counter32
  tAtmCpStatsClp0CellsTxd Counter64
  tAtmCpStatsClp0CellsTxdLo Counter32
  tAtmCpStatsClp0CellsTxdHi Counter32
  tAtmCpStatsDrpCellsRxd Counter32
  tAtmCpStatsDrpClp0CellsRxd Counter32
  tAtmCpStatsDrpClp0CellsTxd Counter32
  tAtmCpStatsTagCells Counter32

Defined Values

timetraATMMIBModule 2.1.6527.1.1.3.27
This document is the SNMP MIB module to manage and provision ATM functionality for the Alcatel-Lucent SROS device. This includes extensions to the AToM MIB defined in RFC 2515 to allow statistics retrieval as well as extensions to the ILMI link attributes. Copyright 2003-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tAtmObjs 2.1.6527.3.1.2.27
OBJECT IDENTIFIER    

tAtmMIBConformance 2.1.6527.3.1.1.27
OBJECT IDENTIFIER    

tAtmMdaObjs 2.1.6527.3.1.2.27.1
OBJECT IDENTIFIER    

tAtmIntfObjs 2.1.6527.3.1.2.27.2
OBJECT IDENTIFIER    

tAtmVclObjs 2.1.6527.3.1.2.27.3
OBJECT IDENTIFIER    

tAal5VccObjs 2.1.6527.3.1.2.27.4
OBJECT IDENTIFIER    

tAtmTrafficDescObjs 2.1.6527.3.1.2.27.5
OBJECT IDENTIFIER    

tAtmVplObjs 2.1.6527.3.1.2.27.6
OBJECT IDENTIFIER    

tAtmVtlObjs 2.1.6527.3.1.2.27.7
OBJECT IDENTIFIER    

tAtmCellVclObjs 2.1.6527.3.1.2.27.8
OBJECT IDENTIFIER    

tAtmSystemObjs 2.1.6527.3.1.2.27.9
OBJECT IDENTIFIER    

tAtmIlmiLinkObjs 2.1.6527.3.1.2.27.10
OBJECT IDENTIFIER    

tAtmTCSublayerObjs 2.1.6527.3.1.2.27.11
OBJECT IDENTIFIER    

tAtmCpObjs 2.1.6527.3.1.2.27.12
OBJECT IDENTIFIER    

tmnxAtmNotifyPrefix 2.1.6527.3.1.3.27
OBJECT IDENTIFIER    

tAtmNotifications 2.1.6527.3.1.3.27.0
OBJECT IDENTIFIER    

tAtmMdaInfoTable 2.1.6527.3.1.2.27.1.1
The tAtmMdaInfoTable contains ATM MDA status information. This table is obsoleted in release 3.0.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmMdaInfoEntry

tAtmMdaInfoEntry 2.1.6527.3.1.2.27.1.1.1
An entry in the tAtmMdaInfoEntry containing status information applicable to an ATM MDA. This entry is obsoleted in release 3.0.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TAtmMdaInfoEntry  

tAtmMdaMaxSupportedVpcs 2.1.6527.3.1.2.27.1.1.1.1
The value of tAtmMdaMaxSupportedVpcs indicates the maximum number of ATM VPCs that can be configured on this MDA. This object is obsoleted in release 3.0.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

tAtmMdaMaxSupportedVccs 2.1.6527.3.1.2.27.1.1.1.2
The value of tAtmMdaMaxSupportedVccs indicates the maximum number of ATM VCCs that can be configured on this MDA. This object is obsoleted in release 3.0.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

tAtmMdaConfiguredVpcs 2.1.6527.3.1.2.27.1.1.1.3
The value of tAtmMdaConfiguredVpcs indicates the number of ATM VPCs that have been configured on this MDA. This object is obsoleted in release 3.0.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

tAtmMdaConfiguredVccs 2.1.6527.3.1.2.27.1.1.1.4
The value of tAtmMdaConfiguredVccs indicates the number of ATM VCCs that have been configured on this MDA. This object is obsoleted in release 3.0.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

tAtmIntfConfTable 2.1.6527.3.1.2.27.2.1
The tAtmIntfConfTable contains ATM interface configuration and status not included in the AToM MIB definition in RFC 2515.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmIntfConfEntry

tAtmIntfConfEntry 2.1.6527.3.1.2.27.2.1.1
An entry in the tAtmIntfConfEntry containing additional configuration and status information applicable to an ATM interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmIntfConfEntry  

tAtmIntfCurrentMaxVpcs 2.1.6527.3.1.2.27.2.1.1.1
The value of tAtmIntfCurrentMaxVpcs indicates the maximum number of VPCs that may be currently configured on this ATM interface. The value is the minimum of atmInterfaceMaxVpcs, and the atmInterfaceMaxVpcs of the interface's UNI/NNI peer as negotiated by ILMI. If the interface does not negotiate with its peer to determine the number of VPCs that can be configured on the interface, then the value of this object must equal atmInterfaceMaxVpcs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1024  

tAtmIntfCurrentMaxVccs 2.1.6527.3.1.2.27.2.1.1.2
The value of tAtmIntfCurrentMaxVccs indicates the maximum number of VCCs that may be currently supported on this ATM interface. The value is the minimum of atmInterfaceMaxVccs, and the atmInterfaceMaxVccs of the interface's UNI/NNI peer as negotiated by ILMI. If the interface does not negotiate with its peer to determine the number of VCCs that can be configured on the interface, then the value of this object must equal atmInterfaceMaxVccs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

tAtmIntfTotalIngrCbrBandwidth 2.1.6527.3.1.2.27.2.1.1.3
The value of tAtmIntfTotalIngrCbrBandwidth indicates the total Cbr bandwidth consumed on this interface in the ingress direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfTotalIngrRtVbrBandwidth 2.1.6527.3.1.2.27.2.1.1.4
The value of tAtmIntfTotalIngrRtVbrBandwidth indicates the total rtVbr bandwidth consumed on this interface in the ingress direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfTotalIngrNrtVbrBandwidth 2.1.6527.3.1.2.27.2.1.1.5
The value of tAtmIntfTotalIngrNrtVbrBandwidth indicates the total nrtVbr bandwidth consumed on this interface in the ingress direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfTotalIngrUbrBandwidth 2.1.6527.3.1.2.27.2.1.1.6
The value of tAtmIntfTotalIngrUbrBandwidth indicates the total Ubr bandwidth consumed on this interface in the ingress direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfTotalEgrCbrBandwidth 2.1.6527.3.1.2.27.2.1.1.7
The value of tAtmIntfTotalEgrCbrBandwidth indicates the total Cbr bandwidth consumed on this interface in the egress direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfTotalEgrRtVbrBandwidth 2.1.6527.3.1.2.27.2.1.1.8
The value of tAtmIntfTotalEgrRtVbrBandwidth indicates tje total rtVbr bandwidth consumed on this interface in the egress direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfTotalEgrNrtVbrBandwidth 2.1.6527.3.1.2.27.2.1.1.9
The value of tAtmIntfTotalEgrNrtVbrBandwidth indicates the total nrtVbr bandwidth consumed on this interface in the egress direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfTotalEgrUbrBandwidth 2.1.6527.3.1.2.27.2.1.1.10
The value of tAtmIntfTotalEgrUbrBandwidth indicates the total Ubr bandwidth consumed on this interface in the egress direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfBandwidth 2.1.6527.3.1.2.27.2.1.1.11
The value of tAtmIntfBandwidth indicates the total ATM link bandwidth accepted on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfShapedBandwidth 2.1.6527.3.1.2.27.2.1.1.12
The value of tAtmIntfShapedBandwidth indicates the total shaped bandwidth consumed on this interface in the egress direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tAtmIntfLastUnknVpi 2.1.6527.3.1.2.27.2.1.1.13
The value of tAtmIntfLastUnknVpi indicates the last unknown Vpi that was received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVpIdentifier  

tAtmIntfLastUnknVci 2.1.6527.3.1.2.27.2.1.1.14
The value of tAtmIntfLastUnknVci indicates the last unknown vci that was received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVcIdentifier  

tAtmIntfOperStatus 2.1.6527.3.1.2.27.2.1.1.15
The value of tAtmIntfOperStatus indicates the status of the ATM interface. If the SONET-PATH layer and TC Sublayer are operationally up, the ATM Interface is considered up. If the SONET-PATH layer and/or TC Sublayer is down, the ATM Interface is set to lowerLayerDown.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), lowerLayerDown(2)  

tAtmIntfConfVtcs 2.1.6527.3.1.2.27.2.1.1.16
The value of tAtmIntfConfVtcs indicates the number of VTCs currently in use at this ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1024  

tAtmIntfConfIfcs 2.1.6527.3.1.2.27.2.1.1.17
The value of tAtmIntfConfIfcs indicates the number of IFCs currently in use at this ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

tAtmIntfStatsTable 2.1.6527.3.1.2.27.2.2
The tAtmIntfStatsTable contains ATM interface stats at the ATM Layer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmIntfStatsEntry

tAtmIntfStatsEntry 2.1.6527.3.1.2.27.2.2.1
An entry in the tAtmIntfStatsEntry containing statistics information applicable to an ATM interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmIntfStatsEntry  

tAtmIntfStatsTotalCellsRxd 2.1.6527.3.1.2.27.2.2.1.1
The value of tAtmIntfStatsTotalCellsRxd indicates the number of valid ATM cells received by the ATM interface including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIntfStatsTotalCellsTxd 2.1.6527.3.1.2.27.2.2.1.2
The value of tAtmIntfStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the ATM interface including both CLP=0 and CLP=1 cells.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIntfStatsTotalBytesRxd 2.1.6527.3.1.2.27.2.2.1.3
The value of tAtmIntfStatsTotalBytesRxd indicates the number of bytes received on this interface. This is the number of tAtmIntfStatsTotalCellsRxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIntfStatsTotalBytesTxd 2.1.6527.3.1.2.27.2.2.1.4
The value of tAtmIntfStatsTotalBytesTxd indicates the number of bytes transmitted on this interface. This is the number of tAtmIntfStatsTotalCellsTxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIntfStatsTotalUnknCellsDrp 2.1.6527.3.1.2.27.2.2.1.5
The value of tAtmIntfStatsTotalUnknCellsDrp indicates the number of cells dropped due to an unknown VPI/VCI.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIntfStatsTotalHecErr 2.1.6527.3.1.2.27.2.2.1.6
The value of tAtmIntfStatsTotalHecErr indicates the number of cells with uncorrectable HEC Errors on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIntfStatsTotalHecErrFixed 2.1.6527.3.1.2.27.2.2.1.7
The value of tAtmIntfStatsTotalHecErrFixed indicates the number of cells with correctable HEC Errors on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIntfAal5StatsTable 2.1.6527.3.1.2.27.2.3
The tAtmIntfAal5StatsTable contains ATM interface stats at the AAL5 Layer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmIntfAal5StatsEntry

tAtmIntfAal5StatsEntry 2.1.6527.3.1.2.27.2.3.1
An entry in the tAtmIntfAal5StatsEntry containing statistics information applicable to an ATM interface at the AAL5 Layer.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmIntfAal5StatsEntry  

tAtmIntfAal5StatsTotalPktsRxd 2.1.6527.3.1.2.27.2.3.1.1
The value of tAtmIntfAal5StatsTotalPktsRxd indicates the number of AAL5 PDUs that are received by the ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIntfAal5StatsTotalPktsTxd 2.1.6527.3.1.2.27.2.3.1.2
The value of tAtmIntfAal5StatsTotalPktsTxd indicates the number of AAL5 PDUs that are transmitted by the ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIntfAal5StatsTotalPktsDrpRxd 2.1.6527.3.1.2.27.2.3.1.3
The value of tAtmIntfAal5StatsTotalPktsDrpRxd indicates the number of AAL5 PDUs dropped by the ATM interface in the receive direction. This count does not include crc32 Errors or oversized SDU discards
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIntfAal5StatsTotalPktsDrpTxd 2.1.6527.3.1.2.27.2.3.1.4
The value of tAtmIntfAal5StatsTotalPktsDrpTxd indicates the number of AAL5 PDUs dropped in the transmit direction. This count does not include crc32 Errors or oversized SDU discards.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIntfAal5StatsTotalCrc32Err 2.1.6527.3.1.2.27.2.3.1.5
The value of tAtmIntfAal5StatsTotalCrc32Err indicates the number of Errors detected by the 32 bit cyclic redundancy check.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIfcInfoTable 2.1.6527.3.1.2.27.2.4
The tAtmIfcInfoTable contains configuration and status information for ATM interface-level connections.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmIfcInfoEntry

tAtmIfcInfoEntry 2.1.6527.3.1.2.27.2.4.1
An entry in the tAtmIfcInfoTable containing configuration and status information applicable to ATM interface-level connections.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmIfcInfoEntry  

tAtmIfcAdminStatus 2.1.6527.3.1.2.27.2.4.1.1
tAtmIfcAdminStatus specifies the desired administrative state of the IFC.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXAdminStatus  

tAtmIfcOperStatus 2.1.6527.3.1.2.27.2.4.1.2
tAtmIfcOperStatus indicates the current operational status of the IFC.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXOperStatus  

tAtmIfcLastChange 2.1.6527.3.1.2.27.2.4.1.3
tAtmIfcLastChange indicates the value of sysUpTime at the time this IFC entered its current operational state.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXLastChange  

tAtmIfcReceiveTrafficDescrIndex 2.1.6527.3.1.2.27.2.4.1.4
tAtmIfcReceiveTrafficDescrIndex identifies the row in the atmTrafficDescrParamTable which applies to the receive direction of the IFC.
Status: current Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

tAtmIfcTransmitTrafficDescrIndex 2.1.6527.3.1.2.27.2.4.1.5
tAtmIfcTransmitTrafficDescrIndex identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the IFC.
Status: current Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

tAtmIfcRowStatus 2.1.6527.3.1.2.27.2.4.1.6
tAtmIfcRowStatus indicates the current RowStatus of the IFC. Entries in the tAtmIfcInfoTable are created as a result of the creation of another system entity (such as a SAP). Since entries in this table can not be created directly, tAtmIfcRowStatus is read-only and will always be 'active' if the row exists.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

tAtmIfcCastType 2.1.6527.3.1.2.27.2.4.1.7
tAtmIfcCastType indicates the connection topology type.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnCastType  

tAtmIfcConnKind 2.1.6527.3.1.2.27.2.4.1.8
The value of tAtmIfcConnKind indicates the use of call control.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnKind  

tAtmIfcInfoOwner 2.1.6527.3.1.2.27.2.4.1.9
The value of tAtmIfcInfoOwner indicates which application caused the creation of the ATM interface-level connection.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnectionOwner  

tAtmIfcStatisticsTable 2.1.6527.3.1.2.27.2.5
The tAtmIfcStatisticsTable is used to gather cell-level statistics on a particular IFC entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmIfcStatisticsEntry

tAtmIfcStatisticsEntry 2.1.6527.3.1.2.27.2.5.1
An entry in the tAtmIfcStatisticsTable containing statistics information applicable to a particular IFC entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmIfcStatisticsEntry  

tAtmIfcStatsTotalCellsRxd 2.1.6527.3.1.2.27.2.5.1.1
The value of tAtmIfcStatsTotalCellsRxd indicates the number of valid ATM cells received by the IFC including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIfcStatsTotalClp0CellsRxd 2.1.6527.3.1.2.27.2.5.1.2
The value of tAtmIfcStatsTotalClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the IFC. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIfcStatsTotalCellsTxd 2.1.6527.3.1.2.27.2.5.1.3
The value of tAtmIfcStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the IFC including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIfcStatsTotalClp0CellsTxd 2.1.6527.3.1.2.27.2.5.1.4
The value of tAtmIfcStatsTotalClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the IFC. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIfcStatsTotalBytesRxd 2.1.6527.3.1.2.27.2.5.1.5
The value of tAtmIfcStatsTotalBytesRxd indicates the number of bytes received by this IFC. This is the number of tAtmIfcStatsTotalCellsRxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIfcStatsTotalBytesTxd 2.1.6527.3.1.2.27.2.5.1.6
The value of tAtmIfcStatsTotalBytesTxd indicates the number of bytes transmitted by this IFC. This is the number of tAtmIfcStatsTotalCellsTxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmIfcStatsDrpCellsRxd 2.1.6527.3.1.2.27.2.5.1.7
The value of tAtmIfcStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the IFC. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIfcStatsDrpClp0CellsRxd 2.1.6527.3.1.2.27.2.5.1.8
The value of tAtmIfcStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the IFC. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIfcStatsDrpClp0CellsTxd 2.1.6527.3.1.2.27.2.5.1.9
The value of tAtmIfcStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this IFC. This includes both discards due to buffer management and policer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIfcStatsTagCells 2.1.6527.3.1.2.27.2.5.1.10
The value of tAtmIfcStatsTagCells indicates the number of tagged CLP=0 cells of the IFC. The egress may or may not discard these cells.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmVclInfoTable 2.1.6527.3.1.2.27.3.1
The tAtmVclInfoTable is used to display non-configuration information on a particular VCL entry in the RFC 2515 AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmVclInfoEntry

tAtmVclInfoEntry 2.1.6527.3.1.2.27.3.1.1
An entry in the tAtmVclInfoTable containing non-configuration information applicable to a particular VCL entry in the AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmVclInfoEntry  

tAtmVclInfoOwner 2.1.6527.3.1.2.27.3.1.1.1
The value of tAtmVclInfoOwner indicates which application caused the creation of the ATM VCL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnectionOwner  

tAtmVclInfoOamStatus 2.1.6527.3.1.2.27.3.1.1.2
The value of tAtmVclInfoOamStatus indicates the OAM operational status of the VCL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmOamStatus  

tAtmVclInfoIlmiStatus 2.1.6527.3.1.2.27.3.1.1.3
The value of tAtmVclInfoIlmiStatus indicates the ILMI status of the VCL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmIlmiStatus  

tAtmVclInfoRxTrafficDescrIdOvr 2.1.6527.3.1.2.27.3.1.1.4
This object indicates the index of the ATM ingress traffic descriptor override. This override value is given by an AAA server such as a RADIUS server. The value zero indicates that no override is given.
Status: current Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 0 | 1..1000  

tAtmVclInfoTxTrafficDescrIdOvr 2.1.6527.3.1.2.27.3.1.1.5
This object indicates the index of the ATM egress traffic descriptor override. This override value is given by an AAA server such as a RADIUS server. The value zero indicates that no override is given.
Status: current Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 0 | 1..1000  

tAtmVclStatisticsTable 2.1.6527.3.1.2.27.3.2
The tAtmVclStatisticsTable is used to gather cell-level statistics on a particular VCL entry in the RFC 2515 AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmVclStatisticsEntry

tAtmVclStatisticsEntry 2.1.6527.3.1.2.27.3.2.1
An entry in the tAtmVclStatisticsTable containing statistics information applicable to a particular VCL entry in the AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmVclStatisticsEntry  

tAtmVclStatsTotalCellsRxd 2.1.6527.3.1.2.27.3.2.1.1
The value of tAtmVclStatsTotalCellsRxd indicates the number of valid ATM cells received by the VCL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVclStatsTotalCellsTxd 2.1.6527.3.1.2.27.3.2.1.2
The value of tAtmVclStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the VCL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVclStatsTotalBytesRxd 2.1.6527.3.1.2.27.3.2.1.3
The value of tAtmVclStatsTotalBytesRxd indicates the number of bytes received by this Vcl. This is the number of tAtmVclStatsTotalCellsRxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVclStatsTotalBytesTxd 2.1.6527.3.1.2.27.3.2.1.4
The value of tAtmVclStatsTotalBytesTxd indicates the number of bytes transmitted by this Vcl. This is the number of tAtmVclStatsTotalCellsTxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmOamVclStatisticsTable 2.1.6527.3.1.2.27.3.3
The tAtmOamVclStatisticsTable is used to gather oam statistics on a particular VCL entry in the RFC 2515 AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmOamVclStatisticsEntry

tAtmOamVclStatisticsEntry 2.1.6527.3.1.2.27.3.3.1
An entry in the tAtmVclStatisticsTable containing statistics information applicable to a particular VCL entry in the AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmOamVclStatisticsEntry  

tAtmOamVclStatsAISCellsTxd 2.1.6527.3.1.2.27.3.3.1.1
The value of tAtmOamVclStatsAISCellsTxd indicates the number of AIS cells transmitted on this VC for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVclStatsRDICellsTxd 2.1.6527.3.1.2.27.3.3.1.2
The value of tAtmOamVclStatsRDICellsTxd indicates the number of RDI cells transmitted on this VC for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVclStatsLoopbackCellsTxd 2.1.6527.3.1.2.27.3.3.1.3
The value of tAtmOamVclStatsLoopbackCellsTxd indicates the number of loopback requests and responses transmitted on this VC for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVclStatsAISCellsRxd 2.1.6527.3.1.2.27.3.3.1.4
The value of tAtmOamVclStatsAISCellsRxd indicates the number of AIS cells received on this VC for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVclStatsRDICellsRxd 2.1.6527.3.1.2.27.3.3.1.5
The value of tAtmOamVclStatsRDICellsRxd indicates the number of RDI cells received on this VC for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVclStatsLoopbackCellsRxd 2.1.6527.3.1.2.27.3.3.1.6
The value of tAtmOamVclStatsLoopbackCellsRxd indicates the number of loopback requests and responses received on this VC for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVclStatsCrc10Err 2.1.6527.3.1.2.27.3.3.1.7
The value of tAtmOamVclStatsCrc10Err indicates the number of oam cells discarded with CRC 10 Errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVclStatsOtherCellsRxd 2.1.6527.3.1.2.27.3.3.1.8
This value of tAtmOamVclStatsOtherCellsRxd indicates the number of oam cells that are received but not identified.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAal5VccStatisticsTable 2.1.6527.3.1.2.27.4.1
tAal5VccStatisticsTable is used to gather AAL5-level statistics on a particular AAL5 VCC entry in the RFC 2515 AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAal5VccStatisticsEntry

tAal5VccStatisticsEntry 2.1.6527.3.1.2.27.4.1.1
An entry in the tAal5VccStatisticsTable containing statistics information applicable to a particular AAL5 VCC entry in the AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAal5VccStatisticsEntry  

tAal5VccStatsPacketsRxd 2.1.6527.3.1.2.27.4.1.1.1
The value of tAal5VccStatsPacketsRxd indicates the number of valid AAL-5 SDUs and AAL-5 SDUs with CRC-32 errors received by the AAL-5 VCC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAal5VccStatsPacketsTxd 2.1.6527.3.1.2.27.4.1.1.2
The value of tAal5VccStatsPacketsTxd indicates the number of AAL-5 SDUs transmitted by the AAL-5 VCC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAal5VccStatsDrpPacketsRxd 2.1.6527.3.1.2.27.4.1.1.3
The value of tAal5VccStatsDrpPacketsRxd indicates the number of dropped AAL-5 SDUs that have been received on the AAL-5 VCC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAal5VccStatsDrpPacketsTxd 2.1.6527.3.1.2.27.4.1.1.4
The value of tAal5VccStatsDrpPacketsTxd indicates the number of dropped AAL-5 SDUs that would have been transmitted on the AAL-5 VCC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmCellVclStatisticsTable 2.1.6527.3.1.2.27.8.1
tAtmCellVclStatisticsTable is used to gather cell-level statistics on a particular VCC entry in the RFC 2515 AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmCellVclStatisticsEntry

tAtmCellVclStatisticsEntry 2.1.6527.3.1.2.27.8.1.1
An entry in the tAtmCellVclStatisticsTable containing statistics information applicable to a particular VCL entry in the AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmCellVclStatisticsEntry  

tAtmCellVclStatsClp0CellsRxd 2.1.6527.3.1.2.27.8.1.1.1
The value of tAtmCellVclStatsClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the VCL.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmCellVclStatsClp0CellsTxd 2.1.6527.3.1.2.27.8.1.1.2
The value of tAtmCellVclStatsClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the VCL.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmCellVclStatsDrpCellsRxd 2.1.6527.3.1.2.27.8.1.1.3
The value of tAtmCellVclStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the VCL. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCellVclStatsDrpClp0CellsRxd 2.1.6527.3.1.2.27.8.1.1.4
The value of tAtmCellVclStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the VCL. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCellVclStatsDrpClp0CellsTxd 2.1.6527.3.1.2.27.8.1.1.5
The value of tAtmCellVclStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this VCL. This includes both discards due to buffer management and policer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCellVclStatsTagCells 2.1.6527.3.1.2.27.8.1.1.6
The value of tAtmCellVclStatsTagCells indicates the number of tagged CLP=0 cells of the VCL. The egress may or may not discard these cells.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmVplInfoTable 2.1.6527.3.1.2.27.6.1
The tAtmVplInfoTable is used to display non-configuration information on a particular VPL entry in the RFC 2515 AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmVplInfoEntry

tAtmVplInfoEntry 2.1.6527.3.1.2.27.6.1.1
An entry in the tAtmVplInfoTable containing non-configuration information applicable to a particular VPL entry in the AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmVplInfoEntry  

tAtmVplInfoOwner 2.1.6527.3.1.2.27.6.1.1.1
The value of tAtmVplInfoOwner indicates which application caused the creation of the ATM VPL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnectionOwner  

tAtmVplInfoOamStatus 2.1.6527.3.1.2.27.6.1.1.2
The value of tAtmVplInfoOamStatus indicates the OAM operational status of the VPL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmOamStatus  

tAtmVplInfoIlmiStatus 2.1.6527.3.1.2.27.6.1.1.3
The value of tAtmVplInfoIlmiStatus indicates the ILMI status of the VPL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmIlmiStatus  

tAtmVplStatisticsTable 2.1.6527.3.1.2.27.6.2
The tAtmVplStatisticsTable is used to gather cell-level statistics on a particular VPL entry in the RFC 2515 AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmVplStatisticsEntry

tAtmVplStatisticsEntry 2.1.6527.3.1.2.27.6.2.1
An entry in the tAtmVplStatisticsTable containing statistics information applicable to a particular VPL entry in the AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmVplStatisticsEntry  

tAtmVplStatsTotalCellsRxd 2.1.6527.3.1.2.27.6.2.1.1
The value of tAtmVplStatsTotalCellsRxd indicates the number of valid ATM cells received by the VPL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVplStatsTotalClp0CellsRxd 2.1.6527.3.1.2.27.6.2.1.2
The value of tAtmVplStatsTotalClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the VPL. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVplStatsTotalCellsTxd 2.1.6527.3.1.2.27.6.2.1.3
The value of tAtmVplStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the VPL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVplStatsTotalClp0CellsTxd 2.1.6527.3.1.2.27.6.2.1.4
The value of tAtmVplStatsTotalClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the VPL. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVplStatsTotalBytesRxd 2.1.6527.3.1.2.27.6.2.1.5
The value of tAtmVplStatsTotalBytesRxd indicates the number of bytes received by this VPL. This is the number of tAtmVplStatsTotalCellsRxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVplStatsTotalBytesTxd 2.1.6527.3.1.2.27.6.2.1.6
The value of tAtmVplStatsTotalBytesTxd indicates the number of bytes transmitted by this VPL. This is the number of tAtmVplStatsTotalCellsTxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVplStatsDrpCellsRxd 2.1.6527.3.1.2.27.6.2.1.7
The value of tAtmVplStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the VPL. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmVplStatsDrpClp0CellsRxd 2.1.6527.3.1.2.27.6.2.1.8
The value of tAtmVplStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the VPL. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmVplStatsDrpClp0CellsTxd 2.1.6527.3.1.2.27.6.2.1.9
The value of tAtmVplStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this VPL. This includes both discards due to buffer management and policer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmVplStatsTagCells 2.1.6527.3.1.2.27.6.2.1.10
The value of tAtmVplStatsTagCells indicates the number of tagged CLP=0 cells of the VPL. The egress may or may not discard these cells.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVplStatisticsTable 2.1.6527.3.1.2.27.6.3
The tAtmOamVplStatisticsTable is used to gather oam statistics on a particular VPL entry in the RFC 2515 AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmOamVplStatisticsEntry

tAtmOamVplStatisticsEntry 2.1.6527.3.1.2.27.6.3.1
An entry in the tAtmVplStatisticsTable containing statistics information applicable to a particular VPL entry in the AToM MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmOamVplStatisticsEntry  

tAtmOamVplStatsAISCellsTxd 2.1.6527.3.1.2.27.6.3.1.1
The value of tAtmOamVplStatsAISCellsTxd indicates the number of AIS cells transmitted on this VPL for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVplStatsRDICellsTxd 2.1.6527.3.1.2.27.6.3.1.2
The value of tAtmOamVplStatsRDICellsTxd indicates the number of RDI cells transmitted on this VPL for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVplStatsLoopbackCellsTxd 2.1.6527.3.1.2.27.6.3.1.3
The value of tAtmOamVplStatsLoopbackCellsTxd indicates the number of loopback requests and responses transmitted on this VPL for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVplStatsAISCellsRxd 2.1.6527.3.1.2.27.6.3.1.4
The value of tAtmOamVplStatsAISCellsRxd indicates the number of AIS cells received on this VPL for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVplStatsRDICellsRxd 2.1.6527.3.1.2.27.6.3.1.5
The value of tAtmOamVplStatsRDICellsRxd indicates the number of RDI cells received on this VPL for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVplStatsLoopbackCellsRxd 2.1.6527.3.1.2.27.6.3.1.6
The value of tAtmOamVplStatsLoopbackCellsRxd indicates the number of loopback requests and responses received on this VPL for both end to end and segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVplStatsCrc10Errors 2.1.6527.3.1.2.27.6.3.1.7
The value of tAtmOamVplStatsCrc10Errors indicates the number of OAM cells discarded on this VPL with CRC 10 errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmOamVplStatsOtherCellsRxd 2.1.6527.3.1.2.27.6.3.1.8
This value of tAtmOamVplStatsOtherCellsRxd indicates the number of OAM cells that are received on this VPL but not identified.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmVtlInfoTable 2.1.6527.3.1.2.27.7.1
The tAtmVtlInfoTable is used to display non-configuration information on a particular VTL entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmVtlInfoEntry

tAtmVtlInfoEntry 2.1.6527.3.1.2.27.7.1.1
An entry in the tAtmVtlInfoTable containing non-configuration information applicable to a particular VTL entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmVtlInfoEntry  

tAtmVtlStartVpi 2.1.6527.3.1.2.27.7.1.1.1
The starting VPI value of the VTL.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmVpIdentifier  

tAtmVtlEndVpi 2.1.6527.3.1.2.27.7.1.1.2
The ending VPI value of the VTL.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmVpIdentifier  

tAtmVtlAdminStatus 2.1.6527.3.1.2.27.7.1.1.3
tAtmVtlAdminStatus specifies the desired administrative state of the VTL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXAdminStatus  

tAtmVtlOperStatus 2.1.6527.3.1.2.27.7.1.1.4
tAtmVtlOperStatus indicates the current operational status of the VTL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXOperStatus  

tAtmVtlLastChange 2.1.6527.3.1.2.27.7.1.1.5
tAtmVtlLastChange indicates the value of sysUpTime at the time this VTL entered its current operational state.
Status: current Access: read-only
OBJECT-TYPE    
  AtmVorXLastChange  

tAtmVtlReceiveTrafficDescrIndex 2.1.6527.3.1.2.27.7.1.1.6
tAtmVtlReceiveTrafficDescrIndex identifies the row in the atmTrafficDescrParamTable which applies to the receive direction of the VTL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

tAtmVtlTransmitTrafficDescrIndex 2.1.6527.3.1.2.27.7.1.1.7
tAtmVtlTransmitTrafficDescrIndex identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VTL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

tAtmVtlRowStatus 2.1.6527.3.1.2.27.7.1.1.8
tAtmVtlRowStatus indicates the current RowStatus of the VTL. Entries in the tAtmVtlInfoTable are created as a result of the creation of another system entity (such as a SAP). Since entries in this table can not be created directly tAtmVtlRowStatus is read-only and will always be 'active' if the row exists.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

tAtmVtlCastType 2.1.6527.3.1.2.27.7.1.1.9
tAtmVtlCastType indicates the connection topology type.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnCastType  

tAtmVtlConnKind 2.1.6527.3.1.2.27.7.1.1.10
tAtmVtlConnKind indicates the use of call control.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnKind  

tAtmVtlInfoOwner 2.1.6527.3.1.2.27.7.1.1.11
The value of tAtmVtlInfoOwner indicates which application caused the creation of the ATM VTL.
Status: current Access: read-only
OBJECT-TYPE    
  AtmConnectionOwner  

tAtmVtlStatisticsTable 2.1.6527.3.1.2.27.7.2
The tAtmVtlStatisticsTable is used to gather cell-level statistics on a particular VTL entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmVtlStatisticsEntry

tAtmVtlStatisticsEntry 2.1.6527.3.1.2.27.7.2.1
An entry in the tAtmVtlStatisticsTable containing statistics information applicable to a particular VTL entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmVtlStatisticsEntry  

tAtmVtlStatsTotalCellsRxd 2.1.6527.3.1.2.27.7.2.1.1
The value of tAtmVtlStatsTotalCellsRxd indicates the number of valid ATM cells received by the VTL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVtlStatsTotalClp0CellsRxd 2.1.6527.3.1.2.27.7.2.1.2
The value of tAtmVtlStatsTotalClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the VTL. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVtlStatsTotalCellsTxd 2.1.6527.3.1.2.27.7.2.1.3
The value of tAtmVtlStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the VTL including both CLP=0 and CLP=1 cells. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVtlStatsTotalClp0CellsTxd 2.1.6527.3.1.2.27.7.2.1.4
The value of tAtmVtlStatsTotalClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the VTL. If traffic policing is implemented, then cells are counted prior to the application of traffic policing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVtlStatsTotalBytesRxd 2.1.6527.3.1.2.27.7.2.1.5
The value of tAtmVtlStatsTotalBytesRxd indicates the number of bytes received by this VTL. This is the number of tAtmVtlStatsTotalCellsRxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVtlStatsTotalBytesTxd 2.1.6527.3.1.2.27.7.2.1.6
The value of tAtmVtlStatsTotalBytesTxd indicates the number of bytes transmitted by this VTL. This is the number of tAtmVtlStatsTotalCellsTxd multiplied by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmVtlStatsDrpCellsRxd 2.1.6527.3.1.2.27.7.2.1.7
The value of tAtmVtlStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the VTL. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmVtlStatsDrpClp0CellsRxd 2.1.6527.3.1.2.27.7.2.1.8
The value of tAtmVtlStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the VTL. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmVtlStatsDrpClp0CellsTxd 2.1.6527.3.1.2.27.7.2.1.9
The value of tAtmVtlStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this VTL. This includes both discards due to buffer management and policer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmVtlStatsTagCells 2.1.6527.3.1.2.27.7.2.1.10
The value of tAtmVtlStatsTagCells indicates the number of tagged CLP=0 cells of the VTL. The egress may or may not discard these cells.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmSysLlid 2.1.6527.3.1.2.27.9.1
The ATM LLID is the Loopback location ID that uniquely identifies the system for the ATM OAM Loopback purposes.
Status: current Access: read-create
OBJECT-TYPE    
  AtmLlid  

tAtmSysOamRetryUp 2.1.6527.3.1.2.27.9.2
The value of tAtmSysOamRetryUp specifies the number of consecutive OAM loopback attempts that must succeed after the periodic attempt before the endpoint will transition from the eteAisLoc state to up. A value of 0 means that the endpoint will transition to the up state immediately if the periodic loopback attempt succeeds.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..10  

tAtmSysOamRetryDown 2.1.6527.3.1.2.27.9.3
The value of tAtmSysOamRetryDown specifies the number of consecutive OAM loopback attempts that must fail after the periodic attempt before the endpoint will transition from the up state to eteAisLoc. A value of 0 means that the endpoint will transition to the eteAisLoc state immediately if the periodic loopback attempt fails.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..10  

tAtmSysOamLoopbackPeriod 2.1.6527.3.1.2.27.9.4
The value of tAtmSysOamLoopbackPeriod specifies the number of seconds between periodic loopback attempts on an ATM endpoint that has periodic loopback enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..40  

tAtmIlmiLinkTable 2.1.6527.3.1.2.27.10.1
The tAtmIlmiLinkTable is used to configure ILMI Link attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmIlmiLinkEntry

tAtmIlmiLinkEntry 2.1.6527.3.1.2.27.10.1.1
An entry in the tAtmIlmiLinkTable containing additional management information applicable to a particular ILMI link on an ATM interface
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmIlmiLinkEntry  

tAtmIlmiLinkRowStatus 2.1.6527.3.1.2.27.10.1.1.1
tAtmIlmiLinkRowStatus is used to create, delete or modify a row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tAtmIlmiLinkLastChanged 2.1.6527.3.1.2.27.10.1.1.2
The value of tAtmIlmiLinkLastChanged indicates the sysUpTime value when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tAtmIlmiLinkAdminStatus 2.1.6527.3.1.2.27.10.1.1.3
The value of tAtmIlmiLinkAdminStatus specifies the administrative status for the ILMI Link.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tAtmIlmiLinkOperStatus 2.1.6527.3.1.2.27.10.1.1.4
The value of tAtmIlmiLinkOperStatus indicates the operational status of the ILMI Link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

tAtmIlmiLinkVpi 2.1.6527.3.1.2.27.10.1.1.5
The value of tAtmIlmiLinkVpi specifies the VPI value of the ILMI link. Once this row has been created, this value cannot be modified.
Status: current Access: read-create
OBJECT-TYPE    
  AtmVpIdentifier  

tAtmIlmiLinkVci 2.1.6527.3.1.2.27.10.1.1.6
The value of tAtmIlmiLinkVci specifies the VCI value of the ILMI link. This value cannot be zero. Once this row has been created, this value cannot be modified.
Status: current Access: read-create
OBJECT-TYPE    
  AtmVcIdentifier  

tAtmIlmiLinkFsmState 2.1.6527.3.1.2.27.10.1.1.7
The value of tAtmIlmiLinkFsmState indicates the state of the ILMI Finite State Machine associated with this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER stopped(1), linkFailing(2), establishing(3), configuring(4), retrievingNetworkPrefixes(5), registeringNetworkPrefixes(6), retrievingAddresses(7), registeringAddresses(8), verifying(9)  

tAtmIlmiLinkReceiveTrafficDescrIndex 2.1.6527.3.1.2.27.10.1.1.8
The value of tAtmIlmiLinkReceiveTrafficDescrIndex specifies the value of the atmTrafficDescrParamIndex index for the row of the ATM Traffic Descriptor Table which applies to the receive direction of this ILMI link. This value cannot be zero.
Status: current Access: read-create
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

tAtmIlmiLinkTransmitTrafficDescrIndex 2.1.6527.3.1.2.27.10.1.1.9
The value of tAtmIlmiLinkTransmitTrafficDescrIndex specifies the value of the atmTrafficDescrParamIndex index for the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this ILMI link. This value cannot be zero.
Status: current Access: read-create
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

tAtmIlmiLinkEstablishConPollIntvl 2.1.6527.3.1.2.27.10.1.1.10
The value of tAtmIlmiLinkEstablishConPollIntvl specifies the amount of time S, in seconds, between successive transmissions of ILMI messages on this interface for the purpose of detecting the establishment of ILMI connectivity.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

tAtmIlmiLinkCheckConPollIntvl 2.1.6527.3.1.2.27.10.1.1.11
The value of tAtmIlmiLinkCheckConPollIntvl specifies the amount of time T, in seconds, between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

tAtmIlmiLinkConPollInactFactor 2.1.6527.3.1.2.27.10.1.1.12
The value of tAtmIlmiLinkConPollInactFactor specifies the number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is declared lost.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

tAtmIlmiLinkUniType 2.1.6527.3.1.2.27.10.1.1.13
The value of tAtmIlmiLinkUniType indicates the UNI type of either `public' or `private' to be advertised by ILMI from this end of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  AtmIlmiLinkUniType  

tAtmIlmiLinkDeviceType 2.1.6527.3.1.2.27.10.1.1.14
The value of tAtmIlmiLinkDeviceType indicates the device type of either `user' or `node' to be advertised by ILMI from this end of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  AtmIlmiLinkDeviceType  

tAtmIlmiLinkVersion 2.1.6527.3.1.2.27.10.1.1.15
The value of tAtmIlmiLinkVersion specifies the ILMI version of either `3.1' or `4.0' to be advertised by ILMI from this end of the interface. The configuration of version `3.0' is not allowed.
Status: current Access: read-create
OBJECT-TYPE    
  AtmIlmiLinkVersion  

tAtmIlmiLinkImeType 2.1.6527.3.1.2.27.10.1.1.16
The value of tAtmIlmiLinkImeType specifies the configured IME type of either `User-Side' or `Network-Side'.
Status: current Access: read-create
OBJECT-TYPE    
  AtmIlmiLinkImeType  

tAtmIlmiLinkNegotiatedVersion 2.1.6527.3.1.2.27.10.1.1.17
The value of tAtmIlmiLinkNegotiatedVersion specifies the ILMI version of either `3.0', `3.1' or `4.0' negotiated with peer IME.
Status: current Access: read-only
OBJECT-TYPE    
  AtmIlmiLinkVersion  

tAtmIlmiLinkNegotiatedImeType 2.1.6527.3.1.2.27.10.1.1.18
The value of tAtmIlmiLinkNegotiatedImeType specifies the resulting IME type of either `User-Side' or `Network-Side' based on local and remote UNI type and device type.
Status: current Access: read-only
OBJECT-TYPE    
  AtmIlmiLinkImeType  

tAtmIlmiLinkNeighborIfIdentifier 2.1.6527.3.1.2.27.10.1.1.19
The value of tAtmIlmiLinkNeighborIfIdentifier indicates the interface identifier advertised by the peer IME. A value of 0 indicates that the value has not been received from the peer IME.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

tAtmIlmiLinkNeighborSystemIdentifier 2.1.6527.3.1.2.27.10.1.1.20
The value of tAtmIlmiLinkNeighborSystemIdentifier indicates The system identifier advertised by the peer IME. A value of `0' indicates that the value has not been received from the peer IME.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

tAtmIlmiLinkNeighborUniType 2.1.6527.3.1.2.27.10.1.1.21
The value of tAtmIlmiLinkNeighborUniType indicates the UNI type of either `public' or `private' that is advertised by the peer IME. A value of `undefined' indicates that the value has not been received from the peer IME.
Status: current Access: read-only
OBJECT-TYPE    
  AtmIlmiLinkUniType  

tAtmIlmiLinkNeighborDeviceType 2.1.6527.3.1.2.27.10.1.1.22
The value of tAtmIlmiLinkNeighborDeviceType indicates the device type of either `user' or `node' that is advertised by the peer IME. A value of `undefined' indicates that the value has not been received from the peer IME.
Status: current Access: read-only
OBJECT-TYPE    
  AtmIlmiLinkDeviceType  

tAtmIlmiLinkNeighborVersion 2.1.6527.3.1.2.27.10.1.1.23
The value of tAtmIlmiLinkNeighborVersion indicates the ILMI version of either `3.0', `3.1' or `4.0' that is advertised by the peer IME. A value of `undefined' indicates that the value has not been received from the peer IME.
Status: current Access: read-only
OBJECT-TYPE    
  AtmIlmiLinkVersion  

tAtmIlmiLinkNeighborMaxVpcs 2.1.6527.3.1.2.27.10.1.1.24
The value of tAtmIlmiLinkNeighborMaxVpcs indicates the maximum number of VPCs that can be supported by the neighbor. If the interface does not negotiate with its peer to determine the number of VPCs that can be configured on the interface, then the value of this object must equal 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4096  

tAtmIlmiLinkNeighborMaxVccs 2.1.6527.3.1.2.27.10.1.1.25
The value of tAtmIlmiLinkNeighborMaxVccs indicates the maximum number of VCCs that can be supported by the neighbor. If the interface does not negotiate with its peer to determine the number of VCCs that can be configured on the interface, then the value of this object must equal 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65536  

tAtmIlmiLinkNeighborMaxVpiBits 2.1.6527.3.1.2.27.10.1.1.26
The value of tAtmIlmiLinkNeighborMaxVpiBits indicates the maximum number of VPI bits that can be supported by the neighbor. If the interface does not negotiate with its peer to determine the number of VPI bits that can be configured on the interface, then the value of this object must equal 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..12  

tAtmIlmiLinkNeighborMaxVciBits 2.1.6527.3.1.2.27.10.1.1.27
The value of tAtmIlmiLinkNeighborMaxVciBits indicates the maximum number of VCI bits that can be supported by the neighbor. If the interface does not negotiate with its peer to determine the number of VCI bits that can be configured on the interface, then the value of this object must equal 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

tAtmIlmiLinkStatisticsTable 2.1.6527.3.1.2.27.10.2
The tAtmIlmiLinkStatisticsTable is used to gather statistics on a particular ILMI Link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmIlmiLinkStatisticsEntry

tAtmIlmiLinkStatisticsEntry 2.1.6527.3.1.2.27.10.2.1
An entry in the tAtmIlmiLinkStatisticsTable containing statistics information applicable to a particular ILMI link on an ATM interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmIlmiLinkStatisticsEntry  

tAtmIlmiLinkOutPdus 2.1.6527.3.1.2.27.10.2.1.1
The value of tAtmIlmiLinkOutPdus indicates the total number SNMP PDUs sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutGetRequestPdus 2.1.6527.3.1.2.27.10.2.1.2
The value of tAtmIlmiLinkOutGetRequestPdus indicates the total number GetRequest SNMP PDUs sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutGetNextRequestPdus 2.1.6527.3.1.2.27.10.2.1.3
The value of tAtmIlmiLinkOutGetNextRequestPdus indicates the total number GetNextRequest SNMP PDUs sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutSetRequestPdus 2.1.6527.3.1.2.27.10.2.1.4
The value of tAtmIlmiLinkOutSetRequestPdus indicates the total number 'SetRequest' SNMP PDUs sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutGetResponsePdus 2.1.6527.3.1.2.27.10.2.1.5
The value of tAtmIlmiLinkOutGetResponsePdus indicates the total number GetResponse SNMP PDUs sent on this ILMI link in response to GetRequest, GetNextRequest and 'SetRequests' received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutTrapPdus 2.1.6527.3.1.2.27.10.2.1.6
The value of tAtmIlmiLinkOutTrapPdus indicates the total number Trap SNMP PDUs sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutTooBigErrors 2.1.6527.3.1.2.27.10.2.1.7
The value of tAtmIlmiLinkOutTooBigErrors indicates the total number SNMP `TooBig' error messages sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutNoSuchNameErrors 2.1.6527.3.1.2.27.10.2.1.8
The value of tAtmIlmiLinkOutNoSuchNameErrors indicates the total number SNMP `NoSuchName' error messages sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutBadValueErrors 2.1.6527.3.1.2.27.10.2.1.9
The value of tAtmIlmiLinkOutBadValueErrors indicates the total number SNMP `BadValue' error messages sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutReadOnlyErrors 2.1.6527.3.1.2.27.10.2.1.10
The value of tAtmIlmiLinkOutReadOnlyErrors indicates the total number SNMP `ReadOnly' error messages sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkOutGeneralErrors 2.1.6527.3.1.2.27.10.2.1.11
The value of tAtmIlmiLinkOutGeneralErrors indicates the total number SNMP `General' error messages sent on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInPdus 2.1.6527.3.1.2.27.10.2.1.12
The value of tAtmIlmiLinkInPdus indicates the total number SNMP PDUs received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInGetRequestPdus 2.1.6527.3.1.2.27.10.2.1.13
The value of tAtmIlmiLinkInGetRequestPdus indicates the total number GetRequest SNMP PDUs received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInGetNextRequestPdus 2.1.6527.3.1.2.27.10.2.1.14
The value of tAtmIlmiLinkInGetNextRequestPdus indicates the total number 'GetNextRequest' SNMP PDUs received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInSetRequestPdus 2.1.6527.3.1.2.27.10.2.1.15
The value of tAtmIlmiLinkInSetRequestPdus indicates the total number 'SetRequest' SNMP PDUs received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInGetResponsePdus 2.1.6527.3.1.2.27.10.2.1.16
The value of tAtmIlmiLinkInGetResponsePdus indicates the total number 'GetResponse' SNMP PDUs received on this ILMI link in response to 'GetRequest', 'GetNextRequest' and 'SetRequests' sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInTrapPdus 2.1.6527.3.1.2.27.10.2.1.17
The value of tAtmIlmiLinkInTrapPdus indicates the total number Trap SNMP PDUs received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInTooBigErrors 2.1.6527.3.1.2.27.10.2.1.18
The value of tAtmIlmiLinkInTooBigErrors indicates the total number SNMP `TooBig' error messages received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInNoSuchNameErrors 2.1.6527.3.1.2.27.10.2.1.19
The value of tAtmIlmiLinkInNoSuchNameErrors indicates the total number SNMP `NoSuchName' error messages received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInBadValueErrors 2.1.6527.3.1.2.27.10.2.1.20
The value of tAtmIlmiLinkInBadValueErrors indicates the total number SNMP `BadValue' error messages received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInReadOnlyErrors 2.1.6527.3.1.2.27.10.2.1.21
The value of tAtmIlmiLinkInReadOnlyErrors indicates the total number SNMP `ReadOnly' error messages received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInGeneralErrors 2.1.6527.3.1.2.27.10.2.1.22
The value of tAtmIlmiLinkInGeneralErrors indicates the total number SNMP `General' error messages received on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInInvalidSnmpVersionPdus 2.1.6527.3.1.2.27.10.2.1.23
The value of tAtmIlmiLinkInInvalidSnmpVersionPdus indicates the total number SNMP PDUs received with invalid version on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInInvalidSnmpCommunityStringPdus 2.1.6527.3.1.2.27.10.2.1.24
The value of tAtmIlmiLinkInInvalidSnmpCommunityStringPdus indicates the total number SNMP PDUs received with invalid community string on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmIlmiLinkInInvalidSnmpFormatPdus 2.1.6527.3.1.2.27.10.2.1.25
The value of tAtmIlmiLinkInInvalidSnmpFormatPdus indicates the total number SNMP PDUs received with invalid ASN.1 format on this ILMI link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmTCSublayerTable 2.1.6527.3.1.2.27.11.1
The tAtmTCSublayerTable contains the Transmission Convergence Sublayer data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmTCSublayerEntry

tAtmTCSublayerEntry 2.1.6527.3.1.2.27.11.1.1
An entry in the tAtmTCSublayerEntry containing additional management information about the Transmission Covergence Sublayer.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmTCSublayerEntry  

tAtmTCSublayerHecErrors 2.1.6527.3.1.2.27.11.1.1.1
The value of tAtmTCSublayerHecErrors indicates the number of cells with uncorrectable HEC Errors on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmTCSublayerHecErrorsFixed 2.1.6527.3.1.2.27.11.1.1.2
The value of tAtmTCSublayerHecErrorsFixed indicates the number of cells with correctable HEC Errors on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatisticsTable 2.1.6527.3.1.2.27.12.1
The tAtmCpStatisticsTable is used to gather statistics on connection profiles assigned to interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmCpStatisticsEntry

tAtmCpStatisticsEntry 2.1.6527.3.1.2.27.12.1.1
An entry in the tAtmCpStatisticsTable contains statistics information applicable to a particular connection profile assigned to a particular interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmCpStatisticsEntry  

tAtmCpStatsTotalCellsRxd 2.1.6527.3.1.2.27.12.1.1.1
The value of tAtmCpStatsTotalCellsRxd indicates the number of valid ATM cells received by the connection profile. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. To obtain the byte count multiply tAtmCpStatsTotalCellsRxd by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmCpStatsTotalCellsRxdLo 2.1.6527.3.1.2.27.12.1.1.2
The value of tAtmCpStatsTotalCellsRxdLo indicates the lower 32-bits of tAtmCpStatsTotalCellsRxd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsTotalCellsRxdHi 2.1.6527.3.1.2.27.12.1.1.3
The value of tAtmCpStatsTotalCellsRxdHi indicates the upper 32-bits of tAtmCpStatsTotalCellsRxd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsTotalCellsTxd 2.1.6527.3.1.2.27.12.1.1.4
The value of tAtmCpStatsTotalCellsTxd indicates the number of valid ATM cells transmitted by the connection profile. If traffic policing is implemented, then cells are counted prior to the application of traffic policing. To obtain the byte count multiply tAtmCpStatsTotalCellsTxd by 53.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmCpStatsTotalCellsTxdLo 2.1.6527.3.1.2.27.12.1.1.5
The value of tAtmCpStatsTotalCellsTxdLo indicates the lower 32-bits of tAtmCpStatsTotalCellsTxd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsTotalCellsTxdHi 2.1.6527.3.1.2.27.12.1.1.6
The value of tAtmCpStatsTotalCellsTxdHi indicates the upper 32-bits of tAtmCpStatsTotalCellsTxd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsClp0CellsRxd 2.1.6527.3.1.2.27.12.1.1.7
The value of tAtmCpStatsClp0CellsRxd indicates the number of valid ATM CLP=0 cells received by the connection profile.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmCpStatsClp0CellsRxdLo 2.1.6527.3.1.2.27.12.1.1.8
The value of tAtmCpStatsClp0CellsRxdLo indicates the lower 32-bits of tAtmCpStatsClp0CellsRxd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsClp0CellsRxdHi 2.1.6527.3.1.2.27.12.1.1.9
The value of tAtmCpStatsClp0CellsRxdHi indicates the upper 32-bits of tAtmCpStatsClp0CellsRxd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsClp0CellsTxd 2.1.6527.3.1.2.27.12.1.1.10
The value of tAtmCpStatsClp0CellsTxd indicates the number of valid ATM CLP=0 cells transmitted by the connection profile.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tAtmCpStatsClp0CellsTxdLo 2.1.6527.3.1.2.27.12.1.1.11
The value of tAtmCpStatsClp0CellsTxdLo indicates the lower 32-bits of tAtmCpStatsClp0CellsTxd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsClp0CellsTxdHi 2.1.6527.3.1.2.27.12.1.1.12
The value of tAtmCpStatsClp0CellsTxdHi indicates the upper 32-bits of tAtmCpStatsClp0CellsTxd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsDrpCellsRxd 2.1.6527.3.1.2.27.12.1.1.13
The value of tAtmCpStatsDrpCellsRxd indicates the number of all policer cells discards (CLP=0+1) of the connection profile. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsDrpClp0CellsRxd 2.1.6527.3.1.2.27.12.1.1.14
The value of tAtmCpStatsDrpClp0CellsRxd indicates the number of all policer CLP=0 cells discards of the connection profile. This excludes any buffer management discards (if applicable).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsDrpClp0CellsTxd 2.1.6527.3.1.2.27.12.1.1.15
The value of tAtmCpStatsDrpClp0CellsTxd indicates the number of all CLP=0 cells discards of this connection profile. This includes both discards due to buffer management and policer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmCpStatsTagCells 2.1.6527.3.1.2.27.12.1.1.16
The value of tAtmCpStatsTagCells indicates the number of tagged CLP=0 cells of the connection profile. The egress may or may not discard these cells.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tAtmTcSubLayerDown 2.1.6527.3.1.3.27.0.1
The tAtmTcSubLayerDown notification is generated when the ATM interface indicates that the TC Sublayer is currently in the Loss of Cell Delineation (LCD) defect maintenance state.
Status: current Access: read-only
NOTIFICATION-TYPE    

tAtmTcSubLayerClear 2.1.6527.3.1.3.27.0.2
The tAtmTcSubLayerClear notification is generated when the ATM interface indicates that the TC Sublayer is currently not in the Loss of Cell Delineation (LCD) defect maintenance state.
Status: current Access: read-only
NOTIFICATION-TYPE    

tAtmPlcpSubLayerDown 2.1.6527.3.1.3.27.0.3
The tAtmPlcpSubLayerDown notification is generated when the ATM interface indicates that PLCP is currently in the far end alarm or incoming LOF defect maintenance state.
Status: current Access: read-only
NOTIFICATION-TYPE    

tAtmPlcpSubLayerClear 2.1.6527.3.1.3.27.0.4
The tAtmPlcpSubLayerClear notification is generated when the ATM interface indicates that PLCP is currently not in the far end alarm or incoming LOF defect maintenance state.
Status: current Access: read-only
NOTIFICATION-TYPE    

tAtmEpOutOfPeerVpiOrVciRange 2.1.6527.3.1.3.27.0.5
The tAtmEpOutOfPeerVpiOrVciRange notification is sent whenever an ILMI link becomes operationally up and ATM EPs are configured on the ILMI-managed interface that are outside the VPI or VCI range allowed by the peer.
Status: current Access: read-only
NOTIFICATION-TYPE    

tAtmMaxPeerVccsExceeded 2.1.6527.3.1.3.27.0.6
The tAtmMaxPeerVccsExceeded notification is sent whenever an ILMI link becomes operationally up and there are more ATM VCLs configured on the ILMI-managed interface than are supported by the peer.
Status: current Access: read-only
NOTIFICATION-TYPE    

tAtmMaxPeerVpcsExceeded 2.1.6527.3.1.3.27.0.7
The tAtmMaxPeerVpcsExceeded notification is sent whenever an ILMI link becomes operationally up and there are more ATM VPLs configured on the ILMI-managed interface than are supported by the peer.
Status: current Access: read-only
NOTIFICATION-TYPE    

tAtmIlmiLinkStatusChange 2.1.6527.3.1.3.27.0.8
The tAtmIlmiLinkStatusChange notification is sent whenever a status change occurs on an ILMI link. This includes changes to the ILMI link's administrative status and the ILMI link's operational status.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxAtmMIBCompliances 2.1.6527.3.1.1.27.1
OBJECT IDENTIFIER    

tmnxAtmMIBGroups 2.1.6527.3.1.1.27.2
OBJECT IDENTIFIER    

tAtmMIBV4v0Compliance 2.1.6527.3.1.1.27.1.3
The compliance statement for revision 4.0 of TIMETRA-ATM-MIB.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tAtmMIBV9v0Compliance 2.1.6527.3.1.1.27.1.4
The compliance statement for revision 9.0 of TIMETRA-ATM-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

tmnxAtmVclInfoGroup 2.1.6527.3.1.1.27.2.6
The group of objects providing for management access of ATM VCL status information on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmVclStatisticsGroup 2.1.6527.3.1.1.27.2.7
The group of objects providing for management access of ATM VCL statistics on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmAal5VccStatisticsGroup 2.1.6527.3.1.1.27.2.8
The group of objects providing for management access of AAL-5 VCC statistics on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmCellVclStatisticsGroup 2.1.6527.3.1.1.27.2.9
The group of objects providing for management access of cell mode VCC statistics on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmVplInfoGroup 2.1.6527.3.1.1.27.2.11
The group of objects providing for management access of ATM VPL status information on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmVplStatisticsGroup 2.1.6527.3.1.1.27.2.12
The group of objects providing for management access of ATM VPL statistics on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmVtlInfoGroup 2.1.6527.3.1.1.27.2.13
The group of objects providing for management access of ATM VTL status information on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmVtlStatisticsGroup 2.1.6527.3.1.1.27.2.14
The group of objects providing for management access of ATM VTL statistics on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmIfcInfoGroup 2.1.6527.3.1.1.27.2.15
The group of objects providing for management access of ATM IFC status information on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmIfcStatisticsGroup 2.1.6527.3.1.1.27.2.16
The group of objects providing for management access of ATM IFC statistics on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmObsoleteV3v0Group 2.1.6527.3.1.1.27.2.17
The group of objects providing made obsolete in the 3.0 release
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmIlmiLinkGroup 2.1.6527.3.1.1.27.2.20
The group of objects providing for management of each ILMI link on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmIlmiStatisticsGroup 2.1.6527.3.1.1.27.2.21
The group of objects providing for management access of ILMI statistics on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmNotificationsR4r0Group 2.1.6527.3.1.1.27.2.22
The group of notifications providing for indications of ATM-related events on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxAtmIntfConfV4v0Group 2.1.6527.3.1.1.27.2.23
The group of objects providing for management of each ATM interface on Alcatel-Lucent SROS series systems release 4.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmSysConfV4v0Group 2.1.6527.3.1.1.27.2.24
The group of objects providing for management access of ATM system level configurations on Alcatel-Lucent SROS series systems release 4.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmIntfStatsV4v0Group 2.1.6527.3.1.1.27.2.25
The group of objects providing for management access of ATM interface statistics on Alcatel-Lucent SROS series systems release 4.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmTCSublayerGroup 2.1.6527.3.1.1.27.2.26
The group of objects providing for management access of an ATM TC Sublayer on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmObsoleteV4v0Group 2.1.6527.3.1.1.27.2.27
The group of objects providing made obsolete in the 4.0 release
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmCpStatisticsGroup 2.1.6527.3.1.1.27.2.28
The group of objects providing for management access of ATM CP statistics on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxAtmVclInfoGroupV9v0 2.1.6527.3.1.1.27.2.29
The group of objects providing for management access of ATM VCL status information that were added in release 9.0 of Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor