TIMETRA-SAP-MIB

File: TIMETRA-SAP-MIB.mib (951624 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB INET-ADDRESS-MIB ATM-TC-MIB
TIMETRA-TC-MIB TIMETRA-SERV-MIB TIMETRA-GLOBAL-MIB
TIMETRA-PORT-MIB TIMETRA-CHASSIS-MIB TIMETRA-QOS-MIB
TIMETRA-FILTER-MIB TIMETRA-SDP-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Gauge32 Integer32 Unsigned32
IpAddress Counter64 Counter32
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
TEXTUAL-CONVENTION DisplayString RowStatus
MacAddress TimeStamp TruthValue
InterfaceIndexOrZero InetAddressPrefixLength InetAddressType
InetAddress AtmTrafficDescrParamIndex AtmVpIdentifier
AtmVcIdentifier TIngPolicerId TEgrPolicerId
TmnxIngPolicerStatMode TmnxEgrPolicerStatMode ServiceAdminStatus
TmnxPortID TmnxEncapVal TmnxServId
TmnxCustId TNamedItem TIngressQueueId
TEgressQueueId TNamedItemOrEmpty TPortSchedulerPIR
TmnxActionType TmnxOperState TmnxIgmpVersion
TCpmProtPolicyID TCIRRate TPIRRate
TmnxEnabledDisabled TItemDescription TPolicyStatementNameOrEmpty
TSapIngressPolicyID TSapEgressPolicyID TIngressHsmdaQueueId
TEgressHsmdaQueueId THsmdaPIRKRateOverride THsmdaCIRKRateOverride
TIngHsmdaPerPacketOffsetOvr TEgrHsmdaPerPacketOffsetOvr TIngressHsmdaCounterId
TEgressHsmdaCounterId TmnxManagedRouteStatus TmnxAdminState
TBurstSize TBurstPercentOrDefault TAdaptationRule
TmnxVRtrID TmnxDefSubIdSource TmnxAncpStringOrZero
THPolCIRRateOverride THPolPIRRateOverride TBurstSizeBytes
TBurstSizeBytesOverride TPlcrBurstSizeBytesOverride TmnxDefInterDestIdSource
TPerPacketOffsetOvr TmnxIngPolicerStatModeOverride TWeight
TmnxEgrPolicerStatModeOverride QTag TCpmProtPolicyIDOrDefault
TDSCPNameOrEmpty TmnxBsxTransitIpPolicyIdOrZero TmnxBsxTransPrefPolicyIdOrZero
TTmplPolicyID ServiceOperStatus TPIRPercentOverride
TCIRPercentOverride TSapEgrEncapGrpQosPolicyIdOrZero TSapEgrEncapGroupType
TSapEgrEncapGroupActionType SvcISID THsmdaWrrWeightOverride
THSMDABurstSizeBytesOverride TmnxBsxAarpIdOrZero TmnxBsxAarpServiceRefType
TQosQGrpInstanceIDorZero THPolVirtualSchePIRRate THPolVirtualScheCIRRate
tmnxServObjs tmnxServConformance tmnxServNotifications
custId svcId svcVpnId
tlsMstiInstanceId tstpTraps tmnxOtherBridgeId
tmnxCustomerBridgeId tmnxCustomerRootBridgeId protectedMacForNotify
tlsDhcpLseStateNewCiAddr tlsDhcpLseStateNewChAddr tlsDHCPClientLease
tlsDhcpLseStateOldCiAddr tlsDhcpLseStateOldChAddr hostConnectivityCiAddrType
hostConnectivityCiAddr hostConnectivityChAddr staticHostDynamicMacIpAddress
staticHostDynamicMacConflict svcTlsMacMoveMaxRate svcDhcpProxyError
svcDhcpCoAError svcDhcpSubAuthError tlsDhcpPacketProblem
svcDhcpLseStateNewCiAddr svcDhcpLseStateNewChAddr svcDhcpClientLease
svcDhcpLseStateOldCiAddr svcDhcpLseStateOldChAddr svcDhcpPacketProblem
svcDhcpLseStatePopulateError ServObjName ServObjDesc
ServType VpnId TlsBpduTranslation
TlsLimitMacMoveLevel TlsLimitMacMove StpExceptionCondition
BridgeId TSapIngQueueId TSapEgrQueueId
TStpPortState StpPortRole StpProtocol
MvplsPruneState TQosQueueAttribute TVirtSchedAttribute
MstiInstanceIdOrZero TdmOptionsCasTrunkFraming CemSapReportAlarm
CemSapEcid L2ptProtocols ConfigStatus
timetraSRMIBModules tmnxPortCemStatsReportAlarm TmnxHwIndexOrZero
tSapIngPolicerId tSapEgrPolicerId tVirtualSchedulerName
tSchedulerPolicyName tQosPolicerLevel TmnxMcFrClassIndex
TFilterID strayPkts malformedPkts
pktLoss bfrOverrun bfrUnderrun

Defined Types

TmnxSapAtmEncapsulation  
The TmnxSapAtmEncapsulation data type is an enumerated integer that specifies the data encapsulation used over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and the ATM Forum LAN Emulation specification.
TEXTUAL-CONVENTION    
  INTEGER vcMultiplexRoutedProtocol(1), vcMultiplexBridgedProtocol8023(2), llcSnapRoutedProtocol(7), multiprotocolFrameRelaySscs(8), unknown(10), llcSnapBridgedProtocol8023(11), vcMultiplexPpp(12), llcNlpidPpp(13), auto(14)  

TmnxSapSubscriberLimit  
The TmnxSapSubscriberLimit data type is an enumerated integer that specifies the maximum number of subscribers allowed on a SAP.
TEXTUAL-CONVENTION    
  Unsigned32 0..32767  

TmnxVlanGroupId  
The TmnxVlanGroupId data type is an enumerated integer that specifies the VLAN range group identifer.
TEXTUAL-CONVENTION    
  Unsigned32 1..4094  

TmnxSapInstStatus  
The TmnxSapInstStatus data type is an enumerated integer that indicates status of the SAP instantiating other SAPs controlled by this SAP.
TEXTUAL-CONVENTION    
  INTEGER notApplicable(1), complete(2), inProgress(3), failed(4)  

SapBaseInfoEntry  
SEQUENCE    
  sapPortId TmnxPortID
  sapEncapValue TmnxEncapVal
  sapRowStatus RowStatus
  sapType ServType
  sapDescription ServObjDesc
  sapAdminStatus ServiceAdminStatus
  sapOperStatus INTEGER
  sapIngressQosPolicyId TSapIngressPolicyID
  sapIngressMacFilterId TFilterID
  sapIngressIpFilterId TFilterID
  sapEgressQosPolicyId TSapEgressPolicyID
  sapEgressMacFilterId TFilterID
  sapEgressIpFilterId TFilterID
  sapMirrorStatus INTEGER
  sapIesIfIndex InterfaceIndexOrZero
  sapLastMgmtChange TimeStamp
  sapCollectAcctStats TruthValue
  sapAccountingPolicyId Unsigned32
  sapVpnId VpnId
  sapCustId TmnxCustId
  sapCustMultSvcSite ServObjName
  sapIngressQosSchedulerPolicy ServObjName
  sapEgressQosSchedulerPolicy ServObjName
  sapSplitHorizonGrp ServObjName
  sapIngressSharedQueuePolicy ServObjName
  sapIngressMatchQinQDot1PBits INTEGER
  sapOperFlags BITS
  sapLastStatusChange TimeStamp
  sapAntiSpoofing INTEGER
  sapIngressIpv6FilterId TFilterID
  sapEgressIpv6FilterId TFilterID
  sapTodSuite TNamedItemOrEmpty
  sapIngUseMultipointShared TruthValue
  sapEgressQinQMarkTopOnly TruthValue
  sapEgressAggRateLimit TPortSchedulerPIR
  sapEndPoint ServObjName
  sapIngressVlanTranslation INTEGER
  sapIngressVlanTranslationId Integer32
  sapSubType INTEGER
  sapCpmProtPolicyId TCpmProtPolicyID
  sapCpmProtMonitorMac TruthValue
  sapEgressFrameBasedAccounting TruthValue
  sapIngressAggRateLimit TPortSchedulerPIR
  sapEgressHsmdaShaperOverride TNamedItemOrEmpty
  sapIngressHsmdaPacketOffOvr TIngHsmdaPerPacketOffsetOvr
  sapEgressHsmdaPacketOffOverride TEgrHsmdaPerPacketOffsetOvr
  sapCallingStationId DisplayString
  sapIsaAaApplicationProfile ServObjName
  sapIngPolicerPolicy TNamedItemOrEmpty
  sapEgrPolicerPolicy TNamedItemOrEmpty
  sapTmplUsed TNamedItemOrEmpty
  sapEthRingIndex Unsigned32
  sapIngressFlowspec TruthValue
  sapCpmProtEthCfmMonitorFlags BITS
  sapTransitIpPolicyId TmnxBsxTransitIpPolicyIdOrZero
  sapOperGrp TNamedItemOrEmpty
  sapMonitorOperGrp TNamedItemOrEmpty
  sapEgressHsmdaWrrPolicyOvr TNamedItemOrEmpty
  sapTransitPrefixPolicyId TmnxBsxTransPrefPolicyIdOrZero
  sapCpmProtMonitorIP TruthValue
  sapHostsAdminState ServiceAdminStatus
  sapHostLockoutPolicy TNamedItemOrEmpty
  sapAarpId TmnxBsxAarpIdOrZero
  sapIngressFPQGrp TNamedItemOrEmpty
  sapIngressFPQGrpInstanceId TQosQGrpInstanceIDorZero
  sapAarpServRefType TmnxBsxAarpServiceRefType
  sapSiteName TNamedItemOrEmpty
  sapIgnoreOperDown TruthValue

SapTlsInfoEntry  
SEQUENCE    
  sapTlsStpAdminStatus TmnxEnabledDisabled
  sapTlsStpPriority INTEGER
  sapTlsStpPortNum INTEGER
  sapTlsStpPathCost INTEGER
  sapTlsStpRapidStart TmnxEnabledDisabled
  sapTlsStpBpduEncap INTEGER
  sapTlsStpPortState TStpPortState
  sapTlsStpDesignatedBridge BridgeId
  sapTlsStpDesignatedPort Integer32
  sapTlsStpForwardTransitions Gauge32
  sapTlsStpInConfigBpdus Gauge32
  sapTlsStpInTcnBpdus Gauge32
  sapTlsStpInBadBpdus Gauge32
  sapTlsStpOutConfigBpdus Gauge32
  sapTlsStpOutTcnBpdus Gauge32
  sapTlsStpOperBpduEncap INTEGER
  sapTlsVpnId VpnId
  sapTlsCustId TmnxCustId
  sapTlsMacAddressLimit Integer32
  sapTlsNumMacAddresses Integer32
  sapTlsNumStaticMacAddresses Integer32
  sapTlsMacLearning TmnxEnabledDisabled
  sapTlsMacAgeing TmnxEnabledDisabled
  sapTlsStpOperEdge TruthValue
  sapTlsStpAdminPointToPoint INTEGER
  sapTlsStpPortRole StpPortRole
  sapTlsStpAutoEdge TmnxEnabledDisabled
  sapTlsStpOperProtocol StpProtocol
  sapTlsStpInRstBpdus Gauge32
  sapTlsStpOutRstBpdus Gauge32
  sapTlsLimitMacMove TlsLimitMacMove
  sapTlsDhcpSnooping TmnxEnabledDisabled
  sapTlsMacPinning TmnxEnabledDisabled
  sapTlsDiscardUnknownSource TmnxEnabledDisabled
  sapTlsMvplsPruneState MvplsPruneState
  sapTlsMvplsMgmtService TmnxServId
  sapTlsMvplsMgmtPortId TmnxPortID
  sapTlsMvplsMgmtEncapValue TmnxEncapVal
  sapTlsArpReplyAgent INTEGER
  sapTlsStpException StpExceptionCondition
  sapTlsAuthenticationPolicy TPolicyStatementNameOrEmpty
  sapTlsL2ptTermination TmnxEnabledDisabled
  sapTlsBpduTranslation TlsBpduTranslation
  sapTlsStpRootGuard TruthValue
  sapTlsStpInsideRegion TruthValue
  sapTlsEgressMcastGroup TNamedItemOrEmpty
  sapTlsStpInMstBpdus Gauge32
  sapTlsStpOutMstBpdus Gauge32
  sapTlsRestProtSrcMac TruthValue
  sapTlsRestUnprotDstMac TruthValue
  sapTlsStpRxdDesigBridge BridgeId
  sapTlsStpRootGuardViolation TruthValue
  sapTlsShcvAction INTEGER
  sapTlsShcvSrcIp IpAddress
  sapTlsShcvSrcMac MacAddress
  sapTlsShcvInterval Unsigned32
  sapTlsMvplsMgmtMsti MstiInstanceIdOrZero
  sapTlsMacMoveNextUpTime Unsigned32
  sapTlsMacMoveRateExcdLeft Unsigned32
  sapTlsRestProtSrcMacAction INTEGER
  sapTlsL2ptForceBoundary TruthValue
  sapTlsLimitMacMoveLevel TlsLimitMacMoveLevel
  sapTlsBpduTransOper INTEGER
  sapTlsDefMsapPolicy TPolicyStatementNameOrEmpty
  sapTlsL2ptProtocols L2ptProtocols
  sapTlsL2ptForceProtocols L2ptProtocols
  sapTlsPppoeMsapTrigger TruthValue
  sapTlsDhcpMsapTrigger TruthValue
  sapTlsMrpJoinTime Unsigned32
  sapTlsMrpLeaveTime Unsigned32
  sapTlsMrpLeaveAllTime Unsigned32
  sapTlsMrpPeriodicTime Unsigned32
  sapTlsMrpPeriodicEnabled TruthValue
  sapTlsPppoePolicy TNamedItemOrEmpty
  sapTlsArpMsapTrigger TruthValue
  sapTlsDefMsapService TmnxServId
  sapTlsDefMsapGroupIf TNamedItemOrEmpty
  sapTlsMrpPolicy TNamedItemOrEmpty
  sapTlsSiteName TNamedItemOrEmpty
  sapTlsDhcp6MsapTrigger TruthValue
  sapTlsShcvRetryTimeout Unsigned32
  sapTlsShcvRetryCount Unsigned32
  sapTlsDataSapInstStatus TmnxSapInstStatus
  sapTlsDataSapInstLastErr DisplayString
  sapTlsMvrpAdminStatus TmnxEnabledDisabled
  sapTlsMvrpOperStatus TmnxEnabledDisabled
  sapTlsInTcBitBpdus Counter32
  sapTlsOutTcBitBpdus Counter32
  sapTlsPppMsapTrigger TruthValue
  sapTlsPppPolicy TNamedItemOrEmpty
  sapTlsTrackSrrpInst Unsigned32
  sapTlsPppUserDb TNamedItemOrEmpty
  sapTlsPppoeUserDb TNamedItemOrEmpty
  sapTlsDhcpUserDb TNamedItemOrEmpty
  sapTlsAutoLearnMacProtect TruthValue

SapAtmInfoEntry  
SEQUENCE    
  sapAtmEncapsulation TmnxSapAtmEncapsulation
  sapAtmIngressTrafficDescIndex AtmTrafficDescrParamIndex
  sapAtmEgressTrafficDescIndex AtmTrafficDescrParamIndex
  sapAtmOamAlarmCellHandling ServiceAdminStatus
  sapAtmOamTerminate ServiceAdminStatus
  sapAtmOamPeriodicLoopback ServiceAdminStatus
  sapAtmLLFAdminStatus ServiceAdminStatus
  sapAtmLLFOperStatus INTEGER
  sapAtmSubPppIndex Unsigned32
  sapAtmDetectedEncapsulation TmnxSapAtmEncapsulation
  sapAtmIngressTrafficDescIndexOvr AtmTrafficDescrParamIndex
  sapAtmEgressTrafficDescIndexOvr AtmTrafficDescrParamIndex

SapBaseStatsEntry  
SEQUENCE    
  sapBaseStatsIngressPchipDroppedPackets Counter64
  sapBaseStatsIngressPchipDroppedOctets Counter64
  sapBaseStatsIngressPchipOfferedHiPrioPackets Counter64
  sapBaseStatsIngressPchipOfferedHiPrioOctets Counter64
  sapBaseStatsIngressPchipOfferedLoPrioPackets Counter64
  sapBaseStatsIngressPchipOfferedLoPrioOctets Counter64
  sapBaseStatsIngressQchipDroppedHiPrioPackets Counter64
  sapBaseStatsIngressQchipDroppedHiPrioOctets Counter64
  sapBaseStatsIngressQchipDroppedLoPrioPackets Counter64
  sapBaseStatsIngressQchipDroppedLoPrioOctets Counter64
  sapBaseStatsIngressQchipForwardedInProfPackets Counter64
  sapBaseStatsIngressQchipForwardedInProfOctets Counter64
  sapBaseStatsIngressQchipForwardedOutProfPackets Counter64
  sapBaseStatsIngressQchipForwardedOutProfOctets Counter64
  sapBaseStatsEgressQchipDroppedInProfPackets Counter64
  sapBaseStatsEgressQchipDroppedInProfOctets Counter64
  sapBaseStatsEgressQchipDroppedOutProfPackets Counter64
  sapBaseStatsEgressQchipDroppedOutProfOctets Counter64
  sapBaseStatsEgressQchipForwardedInProfPackets Counter64
  sapBaseStatsEgressQchipForwardedInProfOctets Counter64
  sapBaseStatsEgressQchipForwardedOutProfPackets Counter64
  sapBaseStatsEgressQchipForwardedOutProfOctets Counter64
  sapBaseStatsCustId TmnxCustId
  sapBaseStatsIngressPchipOfferedUncoloredPackets Counter64
  sapBaseStatsIngressPchipOfferedUncoloredOctets Counter64
  sapBaseStatsAuthenticationPktsDiscarded Counter32
  sapBaseStatsAuthenticationPktsSuccess Counter32
  sapBaseStatsLastClearedTime TimeStamp
  sapBaseStatsIngressCPMPackets Counter64
  sapBaseStatsIngressCPMPacketsHi Counter32
  sapBaseStatsIngressCPMPacketsLo Counter32
  sapBaseStatsIngressCPMOctets Counter64
  sapBaseStatsIngressCPMOctetsHi Counter32
  sapBaseStatsIngressCPMOctetsLo Counter32

SapIngQosQueueStatsEntry  
SEQUENCE    
  sapIngQosQueueId TSapIngQueueId
  sapIngQosQueueStatsOfferedHiPrioPackets Counter64
  sapIngQosQueueStatsDroppedHiPrioPackets Counter64
  sapIngQosQueueStatsOfferedLoPrioPackets Counter64
  sapIngQosQueueStatsDroppedLoPrioPackets Counter64
  sapIngQosQueueStatsOfferedHiPrioOctets Counter64
  sapIngQosQueueStatsDroppedHiPrioOctets Counter64
  sapIngQosQueueStatsOfferedLoPrioOctets Counter64
  sapIngQosQueueStatsDroppedLoPrioOctets Counter64
  sapIngQosQueueStatsForwardedInProfPackets Counter64
  sapIngQosQueueStatsForwardedOutProfPackets Counter64
  sapIngQosQueueStatsForwardedInProfOctets Counter64
  sapIngQosQueueStatsForwardedOutProfOctets Counter64
  sapIngQosCustId TmnxCustId
  sapIngQosQueueStatsUncoloredPacketsOffered Counter64
  sapIngQosQueueStatsUncoloredOctetsOffered Counter64

SapEgrQosQueueStatsEntry  
SEQUENCE    
  sapEgrQosQueueId TSapEgrQueueId
  sapEgrQosQueueStatsForwardedInProfPackets Counter64
  sapEgrQosQueueStatsDroppedInProfPackets Counter64
  sapEgrQosQueueStatsForwardedOutProfPackets Counter64
  sapEgrQosQueueStatsDroppedOutProfPackets Counter64
  sapEgrQosQueueStatsForwardedInProfOctets Counter64
  sapEgrQosQueueStatsDroppedInProfOctets Counter64
  sapEgrQosQueueStatsForwardedOutProfOctets Counter64
  sapEgrQosQueueStatsDroppedOutProfOctets Counter64
  sapEgrQosCustId TmnxCustId

SapIngQosSchedStatsEntry  
SEQUENCE    
  sapIngQosSchedName TNamedItem
  sapIngQosSchedStatsForwardedPackets Counter64
  sapIngQosSchedStatsForwardedOctets Counter64
  sapIngQosSchedCustId TmnxCustId

SapEgrQosSchedStatsEntry  
SEQUENCE    
  sapEgrQosSchedName TNamedItem
  sapEgrQosSchedStatsForwardedPackets Counter64
  sapEgrQosSchedStatsForwardedOctets Counter64
  sapEgrQosSchedCustId TmnxCustId

SapTlsManagedVlanListEntry  
SEQUENCE    
  sapTlsMvplsMinVlanTag Unsigned32
  sapTlsMvplsMaxVlanTag Unsigned32
  sapTlsMvplsRowStatus RowStatus

SapAntiSpoofEntry  
SEQUENCE    
  sapAntiSpoofIpAddress IpAddress
  sapAntiSpoofMacAddress MacAddress

SapStaticHostEntry  
SEQUENCE    
  sapStaticHostRowStatus RowStatus
  sapStaticHostIpAddress IpAddress
  sapStaticHostMacAddress MacAddress
  sapStaticHostSubscrIdent DisplayString
  sapStaticHostSubProfile ServObjName
  sapStaticHostSlaProfile ServObjName
  sapStaticHostShcvOperState INTEGER
  sapStaticHostShcvChecks Unsigned32
  sapStaticHostShcvReplies Unsigned32
  sapStaticHostShcvReplyTime TimeStamp
  sapStaticHostDynMacAddress MacAddress
  sapStaticHostRetailerSvcId TmnxServId
  sapStaticHostRetailerIf InterfaceIndexOrZero
  sapStaticHostFwdingState TmnxOperState
  sapStaticHostAncpString TmnxAncpStringOrZero
  sapStaticHostSubIdIsSapId TruthValue
  sapStaticHostAppProfile ServObjName
  sapStaticHostIntermediateDestId DisplayString
  sapStaticHostAdminStatus ServiceAdminStatus
  sapStaticHostFilterProfile TNamedItemOrEmpty

SapTlsDhcpInfoEntry  
SEQUENCE    
  sapTlsDhcpAdminState TmnxEnabledDisabled
  sapTlsDhcpDescription ServObjDesc
  sapTlsDhcpSnoop TmnxEnabledDisabled
  sapTlsDhcpLeasePopulate Unsigned32
  sapTlsDhcpOperLeasePopulate Unsigned32
  sapTlsDhcpInfoAction INTEGER
  sapTlsDhcpCircuitId INTEGER
  sapTlsDhcpRemoteId INTEGER
  sapTlsDhcpRemoteIdString DisplayString
  sapTlsDhcpProxyAdminState TmnxEnabledDisabled
  sapTlsDhcpProxyServerAddr IpAddress
  sapTlsDhcpProxyLeaseTime Unsigned32
  sapTlsDhcpProxyLTRadiusOverride TruthValue
  sapTlsDhcpVendorIncludeOptions BITS
  sapTlsDhcpVendorOptionString DisplayString

SapTlsDhcpStatsEntry  
SEQUENCE    
  sapTlsDhcpStatsClntSnoopdPckts Counter32
  sapTlsDhcpStatsSrvrSnoopdPckts Counter32
  sapTlsDhcpStatsClntForwdPckts Counter32
  sapTlsDhcpStatsSrvrForwdPckts Counter32
  sapTlsDhcpStatsClntDropdPckts Counter32
  sapTlsDhcpStatsSrvrDropdPckts Counter32
  sapTlsDhcpStatsClntProxRadPckts Counter32
  sapTlsDhcpStatsClntProxLSPckts Counter32
  sapTlsDhcpStatsGenReleasePckts Counter32
  sapTlsDhcpStatsGenForceRenPckts Counter32

SapTlsDhcpLeaseStateEntry  
SEQUENCE    
  sapTlsDhcpLseStateCiAddr IpAddress
  sapTlsDhcpLseStateChAddr MacAddress
  sapTlsDhcpLseStateRemainLseTime Unsigned32
  sapTlsDhcpLseStateOption82 OCTET STRING
  sapTlsDhcpLseStatePersistKey Unsigned32

SapPortIdIngQosSchedStatsEntry  
SEQUENCE    
  sapPortIdIngQosSchedName TNamedItem
  sapPortIdIngPortId TmnxPortID
  sapPortIdIngQosSchedFwdPkts Counter64
  sapPortIdIngQosSchedFwdOctets Counter64
  sapPortIdIngQosSchedCustId TmnxCustId

SapPortIdEgrQosSchedStatsEntry  
SEQUENCE    
  sapPortIdEgrQosSchedName TNamedItem
  sapPortIdEgrPortId TmnxPortID
  sapPortIdEgrQosSchedFwdPkts Counter64
  sapPortIdEgrQosSchedFwdOctets Counter64
  sapPortIdEgrQosSchedCustId TmnxCustId

SapIngQosQueueInfoEntry  
SEQUENCE    
  sapIngQosQId TIngressQueueId
  sapIngQosQRowStatus RowStatus
  sapIngQosQLastMgmtChange TimeStamp
  sapIngQosQOverrideFlags TQosQueueAttribute
  sapIngQosQCBS TBurstSize
  sapIngQosQMBS TBurstSize
  sapIngQosQHiPrioOnly TBurstPercentOrDefault
  sapIngQosQCIRAdaptation TAdaptationRule
  sapIngQosQPIRAdaptation TAdaptationRule
  sapIngQosQAdminPIR TPIRRate
  sapIngQosQAdminCIR TCIRRate
  sapIngQosQMBSBytes TBurstSizeBytes
  sapIngQosQWeight TWeight
  sapIngQosQCIRWeight TWeight
  sapIngQosQAdminPIRPercent Unsigned32
  sapIngQosQAdminCIRPercent Unsigned32

SapEgrQosQueueInfoEntry  
SEQUENCE    
  sapEgrQosQId TEgressQueueId
  sapEgrQosQRowStatus RowStatus
  sapEgrQosQLastMgmtChange TimeStamp
  sapEgrQosQOverrideFlags TQosQueueAttribute
  sapEgrQosQCBS TBurstSize
  sapEgrQosQMBS TBurstSize
  sapEgrQosQHiPrioOnly TBurstPercentOrDefault
  sapEgrQosQCIRAdaptation TAdaptationRule
  sapEgrQosQPIRAdaptation TAdaptationRule
  sapEgrQosQAdminPIR TPIRRate
  sapEgrQosQAdminCIR TCIRRate
  sapEgrQosQAvgOverhead Unsigned32
  sapEgrQosQMBSBytes TBurstSizeBytes
  sapEgrQosQWeight TWeight
  sapEgrQosQCIRWeight TWeight
  sapEgrQosQAdminPIRPercent Unsigned32
  sapEgrQosQAdminCIRPercent Unsigned32

SapIngQosSchedInfoEntry  
SEQUENCE    
  sapIngQosSName TNamedItem
  sapIngQosSRowStatus RowStatus
  sapIngQosSLastMgmtChange TimeStamp
  sapIngQosSOverrideFlags TVirtSchedAttribute
  sapIngQosSPIR THPolVirtualSchePIRRate
  sapIngQosSCIR THPolVirtualScheCIRRate
  sapIngQosSSummedCIR TruthValue

SapEgrQosSchedInfoEntry  
SEQUENCE    
  sapEgrQosSName TNamedItem
  sapEgrQosSRowStatus RowStatus
  sapEgrQosSLastMgmtChange TimeStamp
  sapEgrQosSOverrideFlags TVirtSchedAttribute
  sapEgrQosSPIR THPolVirtualSchePIRRate
  sapEgrQosSCIR THPolVirtualScheCIRRate
  sapEgrQosSSummedCIR TruthValue

SapSubMgmtInfoEntry  
SEQUENCE    
  sapSubMgmtAdminStatus TmnxEnabledDisabled
  sapSubMgmtDefSubProfile ServObjName
  sapSubMgmtDefSlaProfile ServObjName
  sapSubMgmtSubIdentPolicy ServObjName
  sapSubMgmtSubscriberLimit TmnxSapSubscriberLimit
  sapSubMgmtProfiledTrafficOnly TruthValue
  sapSubMgmtNonSubTrafficSubIdent DisplayString
  sapSubMgmtNonSubTrafficSubProf ServObjName
  sapSubMgmtNonSubTrafficSlaProf ServObjName
  sapSubMgmtMacDaHashing TruthValue
  sapSubMgmtDefSubIdent TmnxDefSubIdSource
  sapSubMgmtDefSubIdentString DisplayString
  sapSubMgmtDefAppProfile ServObjName
  sapSubMgmtNonSubTrafficAppProf ServObjName
  sapSubMgmtDefInterDestId TmnxDefInterDestIdSource
  sapSubMgmtDefInterDestIdString DisplayString
  sapSubMgmtDefFilterProfile TNamedItemOrEmpty

SapTlsMstiEntry  
SEQUENCE    
  sapTlsMstiPriority Integer32
  sapTlsMstiPathCost INTEGER
  sapTlsMstiLastMgmtChange TimeStamp
  sapTlsMstiPortRole StpPortRole
  sapTlsMstiPortState TStpPortState
  sapTlsMstiDesignatedBridge BridgeId
  sapTlsMstiDesignatedPort Integer32

SapIpipeInfoEntry  
SEQUENCE    
  sapIpipeCeInetAddressType InetAddressType
  sapIpipeCeInetAddress InetAddress
  sapIpipeMacRefreshInterval Unsigned32
  sapIpipeMacAddress MacAddress
  sapIpipeArpedMacAddress MacAddress
  sapIpipeArpedMacAddressTimeout Unsigned32
  sapIpipeDiscoveredCeInetAddrType InetAddressType
  sapIpipeDiscoveredCeInetAddr InetAddress
  sapIpipeUseBroadcastMac TruthValue
  sapIpipeUsingBroadcastMac TruthValue
  sapIpipeIpv6LinkLocalCeInetAddr InetAddress
  sapIpipeIpv6GlobalCeInetAddr InetAddress
  sapIpipeIpv6DiscoveredMacAddress MacAddress

SapTodMonitorEntry  
SEQUENCE    
  sapCurrentIngressIpFilterId TFilterID
  sapCurrentIngressIpv6FilterId TFilterID
  sapCurrentIngressMacFilterId TFilterID
  sapCurrentIngressQosPolicyId TSapIngressPolicyID
  sapCurrentIngressQosSchedPlcy ServObjName
  sapCurrentEgressIpFilterId TFilterID
  sapCurrentEgressIpv6FilterId TFilterID
  sapCurrentEgressMacFilterId TFilterID
  sapCurrentEgressQosPolicyId TSapEgressPolicyID
  sapCurrentEgressQosSchedPlcy ServObjName
  sapIntendedIngressIpFilterId TFilterID
  sapIntendedIngressIpv6FilterId TFilterID
  sapIntendedIngressMacFilterId TFilterID
  sapIntendedIngressQosPolicyId TSapIngressPolicyID
  sapIntendedIngressQosSchedPlcy ServObjName
  sapIntendedEgressIpFilterId TFilterID
  sapIntendedEgressIpv6FilterId TFilterID
  sapIntendedEgressMacFilterId TFilterID
  sapIntendedEgressQosPolicyId TSapEgressPolicyID
  sapIntendedEgressQosSchedPlcy ServObjName

SapIngrQosPlcyStatsEntry  
SEQUENCE    
  sapIgQosPlcyId TSapIngressPolicyID
  sapIgQosPlcyDroppedHiPrioPackets Counter64
  sapIgQosPlcyDroppedHiPrioOctets Counter64
  sapIgQosPlcyDroppedLoPrioPackets Counter64
  sapIgQosPlcyDroppedLoPrioOctets Counter64
  sapIgQosPlcyForwardedInProfPackets Counter64
  sapIgQosPlcyForwardedInProfOctets Counter64
  sapIgQosPlcyForwardedOutProfPackets Counter64
  sapIgQosPlcyForwardedOutProfOctets Counter64

SapEgrQosPlcyStatsEntry  
SEQUENCE    
  sapEgQosPlcyId TSapEgressPolicyID
  sapEgQosPlcyDroppedInProfPackets Counter64
  sapEgQosPlcyDroppedInProfOctets Counter64
  sapEgQosPlcyDroppedOutProfPackets Counter64
  sapEgQosPlcyDroppedOutProfOctets Counter64
  sapEgQosPlcyForwardedInProfPackets Counter64
  sapEgQosPlcyForwardedInProfOctets Counter64
  sapEgQosPlcyForwardedOutProfPackets Counter64
  sapEgQosPlcyForwardedOutProfOctets Counter64

SapIngQosPlcyQueueStatsEntry  
SEQUENCE    
  sapIgQosPlcyQueuePlcyId TSapIngressPolicyID
  sapIgQosPlcyQueueId TSapIngQueueId
  sapIgQosPlcyQueueStatsOfferedHiPrioPackets Counter64
  sapIgQosPlcyQueueStatsDroppedHiPrioPackets Counter64
  sapIgQosPlcyQueueStatsOfferedLoPrioPackets Counter64
  sapIgQosPlcyQueueStatsDroppedLoPrioPackets Counter64
  sapIgQosPlcyQueueStatsOfferedHiPrioOctets Counter64
  sapIgQosPlcyQueueStatsDroppedHiPrioOctets Counter64
  sapIgQosPlcyQueueStatsOfferedLoPrioOctets Counter64
  sapIgQosPlcyQueueStatsDroppedLoPrioOctets Counter64
  sapIgQosPlcyQueueStatsForwardedInProfPackets Counter64
  sapIgQosPlcyQueueStatsForwardedOutProfPackets Counter64
  sapIgQosPlcyQueueStatsForwardedInProfOctets Counter64
  sapIgQosPlcyQueueStatsForwardedOutProfOctets Counter64
  sapIgQosPlcyQueueCustId TmnxCustId
  sapIgQosPlcyQueueStatsUncoloredPacketsOffered Counter64
  sapIgQosPlcyQueueStatsUncoloredOctetsOffered Counter64

SapEgrQosPlcyQueueStatsEntry  
SEQUENCE    
  sapEgQosPlcyQueuePlcyId TSapEgressPolicyID
  sapEgQosPlcyQueueId TSapEgrQueueId
  sapEgQosPlcyQueueStatsForwardedInProfPackets Counter64
  sapEgQosPlcyQueueStatsDroppedInProfPackets Counter64
  sapEgQosPlcyQueueStatsForwardedOutProfPackets Counter64
  sapEgQosPlcyQueueStatsDroppedOutProfPackets Counter64
  sapEgQosPlcyQueueStatsForwardedInProfOctets Counter64
  sapEgQosPlcyQueueStatsDroppedInProfOctets Counter64
  sapEgQosPlcyQueueStatsForwardedOutProfOctets Counter64
  sapEgQosPlcyQueueStatsDroppedOutProfOctets Counter64
  sapEgQosPlcyQueueCustId TmnxCustId

SapDhcpInfoEntry  
SEQUENCE    
  sapDhcpOperLeasePopulate Unsigned32

SapIngSchedPlcyStatsEntry  
SEQUENCE    
  sapIngSchedPlcyStatsFwdPkt Counter64
  sapIngSchedPlcyStatsFwdOct Counter64

SapEgrSchedPlcyStatsEntry  
SEQUENCE    
  sapEgrSchedPlcyStatsFwdPkt Counter64
  sapEgrSchedPlcyStatsFwdOct Counter64

SapIngSchedPlcyPortStatsEntry  
SEQUENCE    
  sapIngSchedPlcyPortStatsPort TmnxPortID
  sapIngSchedPlcyPortStatsFwdPkt Counter64
  sapIngSchedPlcyPortStatsFwdOct Counter64

SapEgrSchedPlcyPortStatsEntry  
SEQUENCE    
  sapEgrSchedPlcyPortStatsPort TmnxPortID
  sapEgrSchedPlcyPortStatsFwdPkt Counter64
  sapEgrSchedPlcyPortStatsFwdOct Counter64

SapCemInfoEntry  
SEQUENCE    
  sapCemLastMgmtChange TimeStamp
  sapCemEndpointType INTEGER
  sapCemBitrate Unsigned32
  sapCemCasTrunkFraming TdmOptionsCasTrunkFraming
  sapCemPayloadSize Unsigned32
  sapCemJitterBuffer Unsigned32
  sapCemUseRtpHeader TruthValue
  sapCemDifferential TruthValue
  sapCemTimestampFreq Unsigned32
  sapCemReportAlarm CemSapReportAlarm
  sapCemReportAlarmStatus CemSapReportAlarm
  sapCemLocalEcid CemSapEcid
  sapCemRemoteMacAddr MacAddress
  sapCemRemoteEcid CemSapEcid
  sapCemJitterBufPackets Unsigned32
  sapCemPlayoutBufPacketsThreshold Unsigned32

SapCemStatsEntry  
SEQUENCE    
  sapCemStatsIngressForwardedPkts Counter32
  sapCemStatsIngressDroppedPkts Counter32
  sapCemStatsEgressForwardedPkts Counter32
  sapCemStatsEgressDroppedPkts Counter32
  sapCemStatsEgressMissingPkts Counter32
  sapCemStatsEgressPktsReOrder Counter32
  sapCemStatsEgressJtrBfrUnderruns Counter32
  sapCemStatsEgressJtrBfrOverruns Counter32
  sapCemStatsEgressMisOrderDropped Counter32
  sapCemStatsEgressMalformedPkts Counter32
  sapCemStatsEgressLBitDropped Counter32
  sapCemStatsEgressMultipleDropped Counter32
  sapCemStatsEgressESs Counter32
  sapCemStatsEgressSESs Counter32
  sapCemStatsEgressUASs Counter32
  sapCemStatsEgressFailureCounts Counter32
  sapCemStatsEgressUnderrunCounts Counter32
  sapCemStatsEgressOverrunCounts Counter32
  sapCemStatsEgressJtrBfrDepth Gauge32

SapTlsL2ptStatsEntry  
SEQUENCE    
  sapTlsL2ptStatsLastClearedTime TimeStamp
  sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapStpRstBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapStpRstBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx Counter32
  sapTlsL2ptStatsStpConfigBpdusRx Counter32
  sapTlsL2ptStatsStpConfigBpdusTx Counter32
  sapTlsL2ptStatsStpRstBpdusRx Counter32
  sapTlsL2ptStatsStpRstBpdusTx Counter32
  sapTlsL2ptStatsStpTcnBpdusRx Counter32
  sapTlsL2ptStatsStpTcnBpdusTx Counter32
  sapTlsL2ptStatsPvstConfigBpdusRx Counter32
  sapTlsL2ptStatsPvstConfigBpdusTx Counter32
  sapTlsL2ptStatsPvstRstBpdusRx Counter32
  sapTlsL2ptStatsPvstRstBpdusTx Counter32
  sapTlsL2ptStatsPvstTcnBpdusRx Counter32
  sapTlsL2ptStatsPvstTcnBpdusTx Counter32
  sapTlsL2ptStatsOtherBpdusRx Counter32
  sapTlsL2ptStatsOtherBpdusTx Counter32
  sapTlsL2ptStatsOtherL2ptBpdusRx Counter32
  sapTlsL2ptStatsOtherL2ptBpdusTx Counter32
  sapTlsL2ptStatsOtherInvalidBpdusRx Counter32
  sapTlsL2ptStatsOtherInvalidBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapCdpBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapCdpBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapVtpBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapVtpBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapDtpBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapDtpBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapPagpBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapPagpBpdusTx Counter32
  sapTlsL2ptStatsL2ptEncapUdldBpdusRx Counter32
  sapTlsL2ptStatsL2ptEncapUdldBpdusTx Counter32
  sapTlsL2ptStatsCdpBpdusRx Counter32
  sapTlsL2ptStatsCdpBpdusTx Counter32
  sapTlsL2ptStatsVtpBpdusRx Counter32
  sapTlsL2ptStatsVtpBpdusTx Counter32
  sapTlsL2ptStatsDtpBpdusRx Counter32
  sapTlsL2ptStatsDtpBpdusTx Counter32
  sapTlsL2ptStatsPagpBpdusRx Counter32
  sapTlsL2ptStatsPagpBpdusTx Counter32
  sapTlsL2ptStatsUdldBpdusRx Counter32
  sapTlsL2ptStatsUdldBpdusTx Counter32

SapEthernetInfoEntry  
SEQUENCE    
  sapEthernetLLFAdminStatus ServiceAdminStatus
  sapEthernetLLFOperStatus INTEGER

MsapPlcyEntry  
SEQUENCE    
  msapPlcyName TNamedItem
  msapPlcyRowStatus RowStatus
  msapPlcyLastChanged TimeStamp
  msapPlcyDescription TItemDescription
  msapPlcyCpmProtPolicyId TCpmProtPolicyID
  msapPlcyCpmProtMonitorMac TruthValue
  msapPlcySubMgmtDefSubId TmnxDefSubIdSource
  msapPlcySubMgmtDefSubIdStr TNamedItemOrEmpty
  msapPlcySubMgmtDefSubProfile TNamedItemOrEmpty
  msapPlcySubMgmtDefSlaProfile TNamedItemOrEmpty
  msapPlcySubMgmtDefAppProfile TNamedItemOrEmpty
  msapPlcySubMgmtSubIdPlcy TPolicyStatementNameOrEmpty
  msapPlcySubMgmtSubscriberLimit TmnxSapSubscriberLimit
  msapPlcySubMgmtProfiledTrafOnly TruthValue
  msapPlcySubMgmtNonSubTrafSubId TNamedItemOrEmpty
  msapPlcySubMgmtNonSubTrafSubProf TNamedItemOrEmpty
  msapPlcySubMgmtNonSubTrafSlaProf TNamedItemOrEmpty
  msapPlcySubMgmtNonSubTrafAppProf TNamedItemOrEmpty
  msapPlcyAssociatedMsaps Counter32
  msapPlcySubMgmtDefInterDestId TmnxDefInterDestIdSource
  msapPlcySubMgmtDefInterDestIdStr TNamedItemOrEmpty
  msapPlcyIgmpTrkExpiryTime Unsigned32
  msapPlcyIgmpTrkImportPlcy TPolicyStatementNameOrEmpty
  msapPlcyIgmpTrkMaxNbrGrps Unsigned32
  msapPlcyIgmpTrkMaxNbrSrcs Unsigned32
  msapPlcySubMgmtDefFilterProfile TNamedItemOrEmpty

MsapTlsPlcyEntry  
SEQUENCE    
  msapTlsPlcyLastChanged TimeStamp
  msapTlsPlcySplitHorizonGrp TNamedItemOrEmpty
  msapTlsPlcyArpReplyAgent INTEGER
  msapTlsPlcySubMgmtMacDaHashing TruthValue
  msapTlsPlcyDhcpLeasePopulate Unsigned32
  msapTlsPlcyDhcpPrxyAdminState TmnxEnabledDisabled
  msapTlsPlcyDhcpPrxyServAddrType InetAddressType
  msapTlsPlcyDhcpPrxyServAddr InetAddress
  msapTlsPlcyDhcpPrxyLeaseTime Unsigned32
  msapTlsPlcyDhcpPrxyLTRadOverride TruthValue
  msapTlsPlcyDhcpInfoAction INTEGER
  msapTlsPlcyDhcpCircuitId INTEGER
  msapTlsPlcyDhcpRemoteId INTEGER
  msapTlsPlcyDhcpRemoteIdString TNamedItemOrEmpty
  msapTlsPlcyDhcpVendorInclOpts BITS
  msapTlsPlcyDhcpVendorOptStr TNamedItemOrEmpty
  msapTlsPlcyEgressMcastGroup TNamedItemOrEmpty
  msapTlsPlcyIgmpSnpgImportPlcy TPolicyStatementNameOrEmpty
  msapTlsPlcyIgmpSnpgFastLeave TmnxEnabledDisabled
  msapTlsPlcyIgmpSnpgSendQueries TmnxEnabledDisabled
  msapTlsPlcyIgmpSnpgGenQueryIntv Unsigned32
  msapTlsPlcyIgmpSnpgQueryRespIntv Unsigned32
  msapTlsPlcyIgmpSnpgRobustCount Unsigned32
  msapTlsPlcyIgmpSnpgLastMembIntvl Unsigned32
  msapTlsPlcyIgmpSnpgMaxNbrGrps Unsigned32
  msapTlsPlcyIgmpSnpgMvrFromVplsId TmnxServId
  msapTlsPlcyIgmpSnpgVersion TmnxIgmpVersion
  msapTlsPlcyIgmpSnpgMcacPlcyName TPolicyStatementNameOrEmpty
  msapTlsPlcyIgmpSnpgMcacUncnstBW Integer32
  msapTlsPlcyIgmpSnpgMcacPrRsvMnBW Integer32
  msapTlsPlcyArpHostMaxNumHosts Unsigned32
  msapTlsPlcyArpHostMinAuthIntvl Unsigned32

MSapIgmpSnpgMcacLevelEntry  
SEQUENCE    
  msapIgmpSnpgMcacLevelId Unsigned32
  msapIgmpSnpgMcacLevelRowStatus RowStatus
  msapIgmpSnpgMcacLevelLastChanged TimeStamp
  msapIgmpSnpgMcacLevelBW Unsigned32

MSapIgmpSnpgMcacLagEntry  
SEQUENCE    
  msapIgmpSnpgMcacLagPortsDown Unsigned32
  msapIgmpSnpgMcacLagRowStatus RowStatus
  msapIgmpSnpgMcacLagLastChanged TimeStamp
  msapIgmpSnpgMcacLagLevel Unsigned32

MSapInfoEntry  
SEQUENCE    
  msapInfoCreationSapPortEncapVal TmnxEncapVal
  msapInfoCreationPlcyName TNamedItem
  msapInfoReEvalPolicy TmnxActionType
  msapInfoLastChanged TimeStamp

MSapCaptureSapStatsEntry  
SEQUENCE    
  msapCaptureSapStatsTriggerType INTEGER
  msapCaptureSapStatsPktsRecvd Counter32
  msapCaptureSapStatsPktsRedirect Counter32
  msapCaptureSapStatsPktsDropped Counter32

SapTlsMrpEntry  
SEQUENCE    
  sapTlsMrpRxPdus Counter32
  sapTlsMrpDroppedPdus Counter32
  sapTlsMrpTxPdus Counter32
  sapTlsMrpRxNewEvent Counter32
  sapTlsMrpRxJoinInEvent Counter32
  sapTlsMrpRxInEvent Counter32
  sapTlsMrpRxJoinEmptyEvent Counter32
  sapTlsMrpRxEmptyEvent Counter32
  sapTlsMrpRxLeaveEvent Counter32
  sapTlsMrpTxNewEvent Counter32
  sapTlsMrpTxJoinInEvent Counter32
  sapTlsMrpTxInEvent Counter32
  sapTlsMrpTxJoinEmptyEvent Counter32
  sapTlsMrpTxEmptyEvent Counter32
  sapTlsMrpTxLeaveEvent Counter32

SapTlsMmrpEntry  
SEQUENCE    
  sapTlsMmrpMacAddr MacAddress
  sapTlsMmrpDeclared TruthValue
  sapTlsMmrpRegistered TruthValue
  sapTlsMmrpEndStation TruthValue

SapIngQosHsmdaQueueEntry  
SEQUENCE    
  sapIngQosHsmdaQueueId TIngressHsmdaQueueId
  sapIngQosHsmdaQueueRowStatus RowStatus
  sapIngQosHsmdaQueueLastChanged TimeStamp
  sapIngQosHsmdaQueueAdminPIR THsmdaPIRKRateOverride
  sapIngQosHsmdaQueueAdminCIR THsmdaCIRKRateOverride
  sapIngQosHsmdaQueueSlopePolicy TNamedItemOrEmpty

SapIngQosHsmdaQueueStatsEntry  
SEQUENCE    
  sapIngHsmdaQStatCustId TmnxCustId
  sapIngHsmdaQStatHiPktsDropped Counter64
  sapIngHsmdaQStatLoPktsDropped Counter64
  sapIngHsmdaQStatHiOctsDropped Counter64
  sapIngHsmdaQStatLoOctsDropped Counter64
  sapIngHsmdaQStatInProfPktsFwd Counter64
  sapIngHsmdaQStatOutProfPktsFwd Counter64
  sapIngHsmdaQStatInProfOctsFwd Counter64
  sapIngHsmdaQStatOutProfOctsFwd Counter64
  sapIngHsmdaQStatAllPktsOffered Counter64
  sapIngHsmdaQStatAllOctsOffered Counter64

SapIngQosHsmdaCntrStatsEntry  
SEQUENCE    
  sapIngHsmdaCntrStCntrId TIngressHsmdaCounterId
  sapIngHsmdaCntrStCustId TmnxCustId
  sapIngHsmdaCntrStHiPktDrop Counter64
  sapIngHsmdaCntrStLoPktDrop Counter64
  sapIngHsmdaCntrStHiOctDrop Counter64
  sapIngHsmdaCntrStLoOctDrop Counter64
  sapIngHsmdaCntrStInProfPktFwd Counter64
  sapIngHsmdaCntrStOutProfPktFwd Counter64
  sapIngHsmdaCntrStInProfOctFwd Counter64
  sapIngHsmdaCntrStOutProfOctFwd Counter64
  sapIngHsmdaCntrStAllPktOffered Counter64
  sapIngHsmdaCntrStAllOctOffered Counter64

SapEgrQosHsmdaQueueEntry  
SEQUENCE    
  sapEgrQosHsmdaQueueId TEgressHsmdaQueueId
  sapEgrQosHsmdaQueueRowStatus RowStatus
  sapEgrQosHsmdaQueueLastChanged TimeStamp
  sapEgrQosHsmdaQueueAdminPIR THsmdaPIRKRateOverride
  sapEgrQosHsmdaQueueAdminCIR THsmdaCIRKRateOverride
  sapEgrQosHsmdaQueueSlopePolicy TNamedItemOrEmpty
  sapEgrQosHsmdaQueueWrrWeight THsmdaWrrWeightOverride
  sapEgrQosHsmdaQueueMBS THSMDABurstSizeBytesOverride

SapEgrQosHsmdaQueueStatsEntry  
SEQUENCE    
  sapEgrHsmdaQStatCustId TmnxCustId
  sapEgrHsmdaQStatInProfPktFwd Counter64
  sapEgrHsmdaQStatInProfPktDropd Counter64
  sapEgrHsmdaQStatOutProfPktFwd Counter64
  sapEgrHsmdaQStatOutProfPktDropd Counter64
  sapEgrHsmdaQStatInProfOctFwd Counter64
  sapEgrHsmdaQStatInProfOctDropd Counter64
  sapEgrHsmdaQStatOutProfOctFwd Counter64
  sapEgrHsmdaQStatOutProfOctDropd Counter64

SapEgrQosHsmdaCntrStatsEntry  
SEQUENCE    
  sapEgrHsmdaCntrStCntrId TEgressHsmdaCounterId
  sapEgrHsmdaCntrStCustId TmnxCustId
  sapEgrHsmdaCntrStInProfPktFwd Counter64
  sapEgrHsmdaCntrStInProfPktDrop Counter64
  sapEgrHsmdaCntrStOutProfPktFwd Counter64
  sapEgrHsmdaCntrStOutProfPktDrop Counter64
  sapEgrHsmdaCntrStInProfOctFwd Counter64
  sapEgrHsmdaCntrStInProfOctDrop Counter64
  sapEgrHsmdaCntrStOutProfOctFwd Counter64
  sapEgrHsmdaCntrStOutProfOctDrop Counter64

MsapL3PlcyEntry  
SEQUENCE    
  msapL3PlcyLastChanged TimeStamp
  msapL3PlcyAntiSpoof INTEGER

SapStaticHostMRtEntry  
SEQUENCE    
  sapStaticHostMRtAddrType InetAddressType
  sapStaticHostMRtAddr InetAddress
  sapStaticHostMRtPrefixLen InetAddressPrefixLength
  sapStaticHostMRtRowStatus RowStatus
  sapStaticHostMRtLastMgmtChange TimeStamp
  sapStaticHostMRtStatus TmnxManagedRouteStatus

SapTlsArpHostEntry  
SEQUENCE    
  sapTlsArpHostLastMgmtChange TimeStamp
  sapTlsArpHostAdminState TmnxAdminState
  sapTlsArpHostMaxNumHosts Unsigned32
  sapTlsArpHostMinAuthIntvl Unsigned32

SapIgmpTrkEntry  
SEQUENCE    
  sapIgmpTrkLastMgmtChange TimeStamp
  sapIgmpTrkExpiryTime Unsigned32
  sapIgmpTrkImportPlcy TPolicyStatementNameOrEmpty
  sapIgmpTrkMaxNbrGrps Unsigned32
  sapIgmpTrkNbrGrps Gauge32
  sapIgmpTrkMaxNbrSrcs Unsigned32
  sapIgmpTrkDisRtrAlertChk TruthValue

SapFrInfoEntry  
SEQUENCE    
  sapFrInfoFrf12Mode TmnxEnabledDisabled
  sapFrInfoSchedulingClass TmnxMcFrClassIndex
  sapFrInfoLastChanged TimeStamp

SapFrf12InfoEntry  
SEQUENCE    
  sapFrf12InfoFragmentThreshold Unsigned32
  sapFrf12InfoLastChanged TimeStamp
  sapFrf12InfoInterleave TmnxEnabledDisabled

SapArpHostStatEntry  
SEQUENCE    
  sapArpHostStatLastClearedTime TimeStamp
  sapArpHostStatNumHosts Gauge32
  sapArpHostStatTriggersRx Counter32
  sapArpHostStatTriggersIgnored Counter32
  sapArpHostStatTrigIgnQFull Counter32
  sapArpHostStatNumForcedVerif Counter32
  sapArpHostStatNumCreated Counter32
  sapArpHostStatNumDeleted Counter32
  sapArpHostStatNumUpdated Counter32
  sapArpHostStatNumAuthReq Counter32

SapPbbEntry  
SEQUENCE    
  sapPbbSvcIdIVpls TmnxServId
  sapPbbSvcIdBVpls TmnxServId
  sapPbbPortId TmnxPortID
  sapPbbEncapValue TmnxEncapVal
  sapPbbRowStatus RowStatus
  sapPbbLastMgmtChange TimeStamp
  sapPbbIgmpSnpgMRouter TruthValue

SapFPropBMacAddrEntry  
SEQUENCE    
  sapFPropBMacAddrMacNameOrAddrTag INTEGER
  sapFPropBMacAddrMacNameOrAddr TNamedItem
  sapFPropBMacAddrRowStatus RowStatus

SapIpv6HostInfoEntry  
SEQUENCE    
  sapIpv6HostInfoIpoeDhcp6Hosts Unsigned32
  sapIpv6HostInfoPppDhcp6Hosts Unsigned32
  sapIpv6HostInfoPppSLAACHosts Unsigned32
  sapIpv6HostInfoIpoeSLAACHosts Unsigned32

SapIngPlcrCtrlOvrEntry  
SEQUENCE    
  sapIngPlcrCtrlOvrRowStatus RowStatus
  sapIngPlcrCtrlOvrLastChgd TimeStamp
  sapIngPlcrCtrlOvrMaxRate THPolPIRRateOverride
  sapIngPlcrCtrlOvrMinMBSSep TPlcrBurstSizeBytesOverride

SapIngPlcrCtrlOvrLvlEntry  
SEQUENCE    
  sapIngPlcrCtrlOvrLvlLastChgd TimeStamp
  sapIngPlcrCtrlOvrLvlMBS TPlcrBurstSizeBytesOverride

SapIngPlcrOvrEntry  
SEQUENCE    
  sapIngPlcrOvrRowStatus RowStatus
  sapIngPlcrOvrLastChgd TimeStamp
  sapIngPlcrOvrAdminPIR THPolPIRRateOverride
  sapIngPlcrOvrAdminCIR THPolCIRRateOverride
  sapIngPlcrOvrStatMode TmnxIngPolicerStatModeOverride
  sapIngPlcrOvrMBS TPlcrBurstSizeBytesOverride
  sapIngPlcrOvrPktOffset TPerPacketOffsetOvr
  sapIngPlcrOvrCBS TPlcrBurstSizeBytesOverride
  sapIngPlcrOvrAdminPIRPercent TPIRPercentOverride
  sapIngPlcrOvrAdminCIRPercent TCIRPercentOverride

SapEgrPlcrCtrlOvrEntry  
SEQUENCE    
  sapEgrPlcrCtrlOvrRowStatus RowStatus
  sapEgrPlcrCtrlOvrLastChgd TimeStamp
  sapEgrPlcrCtrlOvrMaxRate THPolPIRRateOverride
  sapEgrPlcrCtrlOvrMinMBSSep TPlcrBurstSizeBytesOverride

SapEgrPlcrCtrlOvrLvlEntry  
SEQUENCE    
  sapEgrPlcrCtrlOvrLvlLastChgd TimeStamp
  sapEgrPlcrCtrlOvrLvlMBS TPlcrBurstSizeBytesOverride

SapEgrPlcrOvrEntry  
SEQUENCE    
  sapEgrPlcrOvrRowStatus RowStatus
  sapEgrPlcrOvrLastChgd TimeStamp
  sapEgrPlcrOvrAdminPIR THPolPIRRateOverride
  sapEgrPlcrOvrAdminCIR THPolCIRRateOverride
  sapEgrPlcrOvrStatMode TmnxEgrPolicerStatModeOverride
  sapEgrPlcrOvrMBS TPlcrBurstSizeBytesOverride
  sapEgrPlcrOvrPktOffset TPerPacketOffsetOvr
  sapEgrPlcrOvrCBS TPlcrBurstSizeBytesOverride
  sapEgrPlcrOvrAdminPIRPercent TPIRPercentOverride
  sapEgrPlcrOvrAdminCIRPercent TCIRPercentOverride

SapIngQosPolicerStatsEntry  
SEQUENCE    
  sapIngQosPStatsPolId TIngPolicerId
  sapIngQosPStatsCustId TmnxCustId
  sapIngQosPStatsMode TmnxIngPolicerStatMode
  sapIngQosPStatsOffHiPrioPkts Counter64
  sapIngQosPStatsOffHiPrioPktsLo Counter32
  sapIngQosPStatsOffHiPrioPktsHi Counter32
  sapIngQosPStatsDrpHiPrioPkts Counter64
  sapIngQosPStatsDrpHiPrioPktsLo Counter32
  sapIngQosPStatsDrpHiPrioPktsHi Counter32
  sapIngQosPStatsOffLoPrioPkts Counter64
  sapIngQosPStatsOffLoPrioPktsLo Counter32
  sapIngQosPStatsOffLoPrioPktsHi Counter32
  sapIngQosPStatsDrpLoPrioPkts Counter64
  sapIngQosPStatsDrpLoPrioPktsLo Counter32
  sapIngQosPStatsDrpLoPrioPktsHi Counter32
  sapIngQosPStatsOffHiPrioOcts Counter64
  sapIngQosPStatsOffHiPrioOctsLo Counter32
  sapIngQosPStatsOffHiPrioOctsHi Counter32
  sapIngQosPStatsDrpHiPrioOcts Counter64
  sapIngQosPStatsDrpHiPrioOctsLo Counter32
  sapIngQosPStatsDrpHiPrioOctsHi Counter32
  sapIngQosPStatsOffLoPrioOcts Counter64
  sapIngQosPStatsOffLoPrioOctsLo Counter32
  sapIngQosPStatsOffLoPrioOctsHi Counter32
  sapIngQosPStatsDrpLoPrioOcts Counter64
  sapIngQosPStatsDrpLoPrioOctsLo Counter32
  sapIngQosPStatsDrpLoPrioOctsHi Counter32
  sapIngQosPStatsFwdInProfPkts Counter64
  sapIngQosPStatsFwdInProfPktsLo Counter32
  sapIngQosPStatsFwdInProfPktsHi Counter32
  sapIngQosPStatsFwdOutProfPkts Counter64
  sapIngQosPStatsFwdOutProfPktsLo Counter32
  sapIngQosPStatsFwdOutProfPktsHi Counter32
  sapIngQosPStatsFwdInProfOcts Counter64
  sapIngQosPStatsFwdInProfOctsLo Counter32
  sapIngQosPStatsFwdInProfOctsHi Counter32
  sapIngQosPStatsFwdOutProfOcts Counter64
  sapIngQosPStatsFwdOutProfOctsLo Counter32
  sapIngQosPStatsFwdOutProfOctsHi Counter32
  sapIngQosPStatsUncolPktsOff Counter64
  sapIngQosPStatsUncolPktsOffLo Counter32
  sapIngQosPStatsUncolPktsOffHi Counter32
  sapIngQosPStatsUncolOctsOff Counter64
  sapIngQosPStatsUncolOctsOffLo Counter32
  sapIngQosPStatsUncolOctsOffHi Counter32

SapEgrQosPolicerStatsEntry  
SEQUENCE    
  sapEgrQosPStatsPolId TEgrPolicerId
  sapEgrQosPStatsCustId TmnxCustId
  sapEgrQosPStatsMode TmnxEgrPolicerStatMode
  sapEgrQosPStatsOffInProfPkts Counter64
  sapEgrQosPStatsOffInProfPktsLo Counter32
  sapEgrQosPStatsOffInProfPktsHi Counter32
  sapEgrQosPStatsFwdInProfPkts Counter64
  sapEgrQosPStatsFwdInProfPktsLo Counter32
  sapEgrQosPStatsFwdInProfPktsHi Counter32
  sapEgrQosPStatsDrpInProfPkts Counter64
  sapEgrQosPStatsDrpInProfPktsLo Counter32
  sapEgrQosPStatsDrpInProfPktsHi Counter32
  sapEgrQosPStatsOffOutProfPkts Counter64
  sapEgrQosPStatsOffOutProfPktsLo Counter32
  sapEgrQosPStatsOffOutProfPktsHi Counter32
  sapEgrQosPStatsFwdOutProfPkts Counter64
  sapEgrQosPStatsFwdOutProfPktsLo Counter32
  sapEgrQosPStatsFwdOutProfPktsHi Counter32
  sapEgrQosPStatsDrpOutProfPkts Counter64
  sapEgrQosPStatsDrpOutProfPktsLo Counter32
  sapEgrQosPStatsDrpOutProfPktsHi Counter32
  sapEgrQosPStatsOffInProfOcts Counter64
  sapEgrQosPStatsOffInProfOctsLo Counter32
  sapEgrQosPStatsOffInProfOctsHi Counter32
  sapEgrQosPStatsFwdInProfOcts Counter64
  sapEgrQosPStatsFwdInProfOctsLo Counter32
  sapEgrQosPStatsFwdInProfOctsHi Counter32
  sapEgrQosPStatsDrpInProfOcts Counter64
  sapEgrQosPStatsDrpInProfOctsLo Counter32
  sapEgrQosPStatsDrpInProfOctsHi Counter32
  sapEgrQosPStatsOffOutProfOcts Counter64
  sapEgrQosPStatsOffOutProfOctsLo Counter32
  sapEgrQosPStatsOffOutProfOctsHi Counter32
  sapEgrQosPStatsFwdOutProfOcts Counter64
  sapEgrQosPStatsFwdOutProfOctsLo Counter32
  sapEgrQosPStatsFwdOutProfOctsHi Counter32
  sapEgrQosPStatsDrpOutProfOcts Counter64
  sapEgrQosPStatsDrpOutProfOctsLo Counter32
  sapEgrQosPStatsDrpOutProfOctsHi Counter32
  sapEgrQosPStatsUncolPktsOff Counter64
  sapEgrQosPStatsUncolPktsOffLo Counter32
  sapEgrQosPStatsUncolPktsOffHi Counter32
  sapEgrQosPStatsUncolOctsOff Counter64
  sapEgrQosPStatsUncolOctsOffLo Counter32
  sapEgrQosPStatsUncolOctsOffHi Counter32

SapIngQosPlcyPolicerStatsEntry  
SEQUENCE    
  sapIgQosPlcyPStatPlcyId TSapIngressPolicyID
  sapIgQosPlcyPStatPolId TIngPolicerId
  sapIgQosPlcyPStatCustId TmnxCustId
  sapIgQosPlcyPStatMode TmnxIngPolicerStatMode
  sapIgQosPlcyPStatOffHiPrioPkts Counter64
  sapIgQosPlcyPStatOffHiPrioPktsL Counter32
  sapIgQosPlcyPStatOffHiPrioPktsH Counter32
  sapIgQosPlcyPStatDrpHiPrioPkts Counter64
  sapIgQosPlcyPStatDrpHiPrioPktsL Counter32
  sapIgQosPlcyPStatDrpHiPrioPktsH Counter32
  sapIgQosPlcyPStatOffLoPrioPkts Counter64
  sapIgQosPlcyPStatOffLoPrioPktsL Counter32
  sapIgQosPlcyPStatOffLoPrioPktsH Counter32
  sapIgQosPlcyPStatDrpLoPrioPkts Counter64
  sapIgQosPlcyPStatDrpLoPrioPktsL Counter32
  sapIgQosPlcyPStatDrpLoPrioPktsH Counter32
  sapIgQosPlcyPStatOffHiPrioOcts Counter64
  sapIgQosPlcyPStatOffHiPrioOctsL Counter32
  sapIgQosPlcyPStatOffHiPrioOctsH Counter32
  sapIgQosPlcyPStatDrpHiPrioOcts Counter64
  sapIgQosPlcyPStatDrpHiPrioOctsL Counter32
  sapIgQosPlcyPStatDrpHiPrioOctsH Counter32
  sapIgQosPlcyPStatOffLoPrioOcts Counter64
  sapIgQosPlcyPStatOffLoPrioOctsL Counter32
  sapIgQosPlcyPStatOffLoPrioOctsH Counter32
  sapIgQosPlcyPStatDrpLoPrioOcts Counter64
  sapIgQosPlcyPStatDrpLoPrioOctsL Counter32
  sapIgQosPlcyPStatDrpLoPrioOctsH Counter32
  sapIgQosPlcyPStatFwdInProfPkts Counter64
  sapIgQosPlcyPStatFwdInProfPktsL Counter32
  sapIgQosPlcyPStatFwdInProfPktsH Counter32
  sapIgQosPlcyPStatFwdOutProfPkts Counter64
  sapIgQosPlcyPStatFwdOutProfPktsL Counter32
  sapIgQosPlcyPStatFwdOutProfPktsH Counter32
  sapIgQosPlcyPStatFwdInProfOcts Counter64
  sapIgQosPlcyPStatFwdInProfOctsL Counter32
  sapIgQosPlcyPStatFwdInProfOctsH Counter32
  sapIgQosPlcyPStatFwdOutProfOcts Counter64
  sapIgQosPlcyPStatFwdOutProfOctsL Counter32
  sapIgQosPlcyPStatFwdOutProfOctsH Counter32
  sapIgQosPlcyPStatUncolPktsOff Counter64
  sapIgQosPlcyPStatUncolPktsOffL Counter32
  sapIgQosPlcyPStatUncolPktsOffH Counter32
  sapIgQosPlcyPStatUncolOctsOff Counter64
  sapIgQosPlcyPStatUncolOctsOffL Counter32
  sapIgQosPlcyPStatUncolOctsOffH Counter32

SapEgrQosPlcyPolicerStatsEntry  
SEQUENCE    
  sapEgQosPlcyPStatPlcyId TSapEgressPolicyID
  sapEgQosPlcyPStatPolId TEgrPolicerId
  sapEgQosPlcyPStatCustId TmnxCustId
  sapEgQosPlcyPStatMode TmnxEgrPolicerStatMode
  sapEgQosPlcyPStatOffInProfPkts Counter64
  sapEgQosPlcyPStatOffInProfPktsL Counter32
  sapEgQosPlcyPStatOffInProfPktsH Counter32
  sapEgQosPlcyPStatFwdInProfPkts Counter64
  sapEgQosPlcyPStatFwdInProfPktsL Counter32
  sapEgQosPlcyPStatFwdInProfPktsH Counter32
  sapEgQosPlcyPStatDrpInProfPkts Counter64
  sapEgQosPlcyPStatDrpInProfPktsL Counter32
  sapEgQosPlcyPStatDrpInProfPktsH Counter32
  sapEgQosPlcyPStatOffOutProfPkts Counter64
  sapEgQosPlcyPStatOffOutProfPktsL Counter32
  sapEgQosPlcyPStatOffOutProfPktsH Counter32
  sapEgQosPlcyPStatFwdOutProfPkts Counter64
  sapEgQosPlcyPStatFwdOutProfPktsL Counter32
  sapEgQosPlcyPStatFwdOutProfPktsH Counter32
  sapEgQosPlcyPStatDrpOutProfPkts Counter64
  sapEgQosPlcyPStatDrpOutProfPktsL Counter32
  sapEgQosPlcyPStatDrpOutProfPktsH Counter32
  sapEgQosPlcyPStatOffInProfOcts Counter64
  sapEgQosPlcyPStatOffInProfOctsL Counter32
  sapEgQosPlcyPStatOffInProfOctsH Counter32
  sapEgQosPlcyPStatFwdInProfOcts Counter64
  sapEgQosPlcyPStatFwdInProfOctsL Counter32
  sapEgQosPlcyPStatFwdInProfOctsH Counter32
  sapEgQosPlcyPStatDrpInProfOcts Counter64
  sapEgQosPlcyPStatDrpInProfOctsL Counter32
  sapEgQosPlcyPStatDrpInProfOctsH Counter32
  sapEgQosPlcyPStatOffOutProfOcts Counter64
  sapEgQosPlcyPStatOffOutProfOctsL Counter32
  sapEgQosPlcyPStatOffOutProfOctsH Counter32
  sapEgQosPlcyPStatFwdOutProfOcts Counter64
  sapEgQosPlcyPStatFwdOutProfOctsL Counter32
  sapEgQosPlcyPStatFwdOutProfOctsH Counter32
  sapEgQosPlcyPStatDrpOutProfOcts Counter64
  sapEgQosPlcyPStatDrpOutProfOctsL Counter32
  sapEgQosPlcyPStatDrpOutProfOctsH Counter32

SapTmplEntry  
SEQUENCE    
  sapTmplName TNamedItem
  sapTmplRowStatus RowStatus
  sapTmplLastChanged TimeStamp
  sapTmplSapCount Unsigned32
  sapTmplType ServType
  sapTmplIngressQosPolicyId TTmplPolicyID
  sapTmplIngressMacFilterId TFilterID
  sapTmplIngressIpFilterId TFilterID
  sapTmplEgressQosPolicyId TTmplPolicyID
  sapTmplEgressMacFilterId TFilterID
  sapTmplEgressIpFilterId TFilterID
  sapTmplCollectAcctStats TruthValue
  sapTmplIngressQosSchedulerPolicy ServObjName
  sapTmplEgressQosSchedulerPolicy ServObjName
  sapTmplIngressSharedQueuePolicy ServObjName
  sapTmplIngressMatchQinQDot1PBits INTEGER
  sapTmplIngressIpv6FilterId TFilterID
  sapTmplEgressIpv6FilterId TFilterID
  sapTmplIngUseMultipointShared TruthValue
  sapTmplEgressQinQMarkTopOnly TruthValue
  sapTmplEgressAggRateLimit TPortSchedulerPIR
  sapTmplEgressFrameBasedAcctg TruthValue
  sapTmplIngressAggRateLimit TPortSchedulerPIR
  sapTmplIngPolicerPolicy TNamedItemOrEmpty
  sapTmplEgrPolicerPolicy TNamedItemOrEmpty
  sapTmplDot1agCfmMip TruthValue
  sapTmplCpmProtPolicyId TCpmProtPolicyIDOrDefault
  sapTmplCpmProtMonitorMac TruthValue
  sapTmplCpmProtEthCfmMonitorFlags BITS

SapTmplTlsEntry  
SEQUENCE    
  sapTmplTlsLastChanged TimeStamp
  sapTmplTlsMacAgeing TmnxEnabledDisabled
  sapTmplTlsStpAdminStatus TmnxEnabledDisabled
  sapTmplTlsStpPriority INTEGER
  sapTmplTlsStpPathCost INTEGER
  sapTmplTlsStpRapidStart TmnxEnabledDisabled
  sapTmplTlsStpBpduEncap INTEGER
  sapTmplTlsMacAddressLimit Integer32
  sapTmplTlsMacLearning TmnxEnabledDisabled
  sapTmplTlsStpAdminPointToPoint INTEGER
  sapTmplTlsStpAutoEdge TmnxEnabledDisabled
  sapTmplTlsDiscardUnknownSource TmnxEnabledDisabled
  sapTmplTlsL2ptTermination TmnxEnabledDisabled
  sapTmplTlsBpduTranslation TlsBpduTranslation
  sapTmplTlsStpRootGuard TruthValue
  sapTmplTlsL2ptProtocols L2ptProtocols
  sapTmplTlsLimitMacMove TlsLimitMacMove
  sapTmplTlsLimitMacMoveLevel TlsLimitMacMoveLevel

SapTlsEsVidGrpEntry  
SEQUENCE    
  sapTlsEsVidGrpId TmnxVlanGroupId
  sapTlsEsVidGrpRowStatus RowStatus
  sapTlsEsVidGrpLastChgd TimeStamp
  sapTlsEsVidGrpStartVlanTag QTag
  sapTlsEsVidGrpEndVlanTag QTag

SapTmplUserEntry  
SEQUENCE    
  sapTmplUserCreationOrigin INTEGER
  sapTmplUserCreatorSvcId TmnxServId

SapIngQosArbitStatsEntry  
SEQUENCE    
  sapIngQosArbitStatsName TNamedItem
  sapIngQosArbitStatsFwdPkts Counter64
  sapIngQosArbitStatsFwdPktsLo Counter32
  sapIngQosArbitStatsFwdPktsHi Counter32
  sapIngQosArbitStatsFwdOcts Counter64
  sapIngQosArbitStatsFwdOctsLo Counter32
  sapIngQosArbitStatsFwdOctsHi Counter32

SapEgrQosArbitStatsEntry  
SEQUENCE    
  sapEgrQosArbitStatsName TNamedItem
  sapEgrQosArbitStatsFwdPkts Counter64
  sapEgrQosArbitStatsFwdPktsLo Counter32
  sapEgrQosArbitStatsFwdPktsHi Counter32
  sapEgrQosArbitStatsFwdOcts Counter64
  sapEgrQosArbitStatsFwdOctsLo Counter32
  sapEgrQosArbitStatsFwdOctsHi Counter32

SapPortIdIngQosArbitStatsEntry  
SEQUENCE    
  sapPortIdIngQosArbitName TNamedItem
  sapPortIdIngQosArbitFwdPkts Counter64
  sapPortIdIngQosArbitFwdOcts Counter64
  sapPortIdIngQosArbitFwdPktsLo Counter32
  sapPortIdIngQosArbitFwdPktsHi Counter32
  sapPortIdIngQosArbitFwdOctsLo Counter32
  sapPortIdIngQosArbitFwdOctsHi Counter32

SapPortIdEgrQosArbitStatsEntry  
SEQUENCE    
  sapPortIdEgrQosArbitName TNamedItem
  sapPortIdEgrQosArbitFwdPkts Counter64
  sapPortIdEgrQosArbitFwdOcts Counter64
  sapPortIdEgrQosArbitFwdPktsLo Counter32
  sapPortIdEgrQosArbitFwdPktsHi Counter32
  sapPortIdEgrQosArbitFwdOctsLo Counter32
  sapPortIdEgrQosArbitFwdOctsHi Counter32

SapTlsSpbEntry  
SEQUENCE    
  sapTlsSpbRowStatus RowStatus
  sapTlsSpbLastChgd TimeStamp
  sapTlsSpbIfIndex InterfaceIndexOrZero
  sapTlsSpbAdminState TmnxAdminState

SapTlsMvrpEntry  
SEQUENCE    
  sapTlsMvrpVlanId Unsigned32
  sapTlsMvrpDeclared TruthValue
  sapTlsMvrpRegistered TruthValue
  sapTlsMvrpEndStation TruthValue

TmnxGreTunnelEntry  
SEQUENCE    
  tmnxGreTunnelName TNamedItem
  tmnxGreTunnelRowStatus RowStatus
  tmnxGreTunnelLastChanged TimeStamp
  tmnxGreTunnelDstIpAddrType InetAddressType
  tmnxGreTunnelDstIpAddr InetAddress
  tmnxGreTunnelDescription TItemDescription
  tmnxGreTunnelLclIpAddrType InetAddressType
  tmnxGreTunnelLclIpAddr InetAddress
  tmnxGreTunnelRemIpAddrType InetAddressType
  tmnxGreTunnelRemIpAddr InetAddress
  tmnxGreTunnelBackupRemIpAddrType InetAddressType
  tmnxGreTunnelBackupRemIpAddr InetAddress
  tmnxGreTunnelOperRemIpAddrType InetAddressType
  tmnxGreTunnelOperRemIpAddr InetAddress
  tmnxGreTunnelDeliverySvcId TmnxServId
  tmnxGreTunnelAdminState TmnxAdminState
  tmnxGreTunnelOperState TmnxOperState
  tmnxGreTunnelOperFlags BITS
  tmnxGreTunnelDscp TDSCPNameOrEmpty
  tmnxGreTunnelReassembly Integer32
  tmnxGreTunnelClearDfBit TruthValue
  tmnxGreTunnelIpMtu Unsigned32
  tmnxGreTunnelHostISA TmnxHwIndexOrZero

TmnxGreTunnelStatsEntry  
SEQUENCE    
  tmnxGreTunnelPktsTx Counter64
  tmnxGreTunnelPktsTxLo Counter32
  tmnxGreTunnelPktsTxHi Counter32
  tmnxGreTunnelPktsRx Counter64
  tmnxGreTunnelPktsRxLo Counter32
  tmnxGreTunnelPktsRxHi Counter32
  tmnxGreTunnelBytesTx Counter64
  tmnxGreTunnelBytesTxLo Counter32
  tmnxGreTunnelBytesTxHi Counter32
  tmnxGreTunnelBytesRx Counter64
  tmnxGreTunnelBytesRxLo Counter32
  tmnxGreTunnelBytesRxHi Counter32
  tmnxGreTunnelTxErrors Counter32
  tmnxGreTunnelRxErrors Counter32
  tmnxGreTunnelKeyIgnoredRx Counter64
  tmnxGreTunnelKeyIgnoredRxLo Counter32
  tmnxGreTunnelKeyIgnoredRxHi Counter32
  tmnxGreTunnelSeqIgnoredRx Counter64
  tmnxGreTunnelSeqIgnoredRxLo Counter32
  tmnxGreTunnelSeqIgnoredRxHi Counter32
  tmnxGreTunnelVersUnsupRx Counter64
  tmnxGreTunnelVersUnsupRxLo Counter32
  tmnxGreTunnelVersUnsupRxHi Counter32
  tmnxGreTunnelInvalidChksumRx Counter64
  tmnxGreTunnelInvalidChksumRxLo Counter32
  tmnxGreTunnelInvalidChksumRxHi Counter32
  tmnxGreTunnelLoopsRx Counter64
  tmnxGreTunnelLoopsRxLo Counter32
  tmnxGreTunnelLoopsRxHi Counter32
  tmnxGreTunnelTooBigTx Counter64
  tmnxGreTunnelTooBigTxLo Counter32
  tmnxGreTunnelTooBigTxHi Counter32

SapAtmVcRangeEntry  
SEQUENCE    
  sapAtmVcRangeIndex Unsigned32
  sapAtmVcRangeRowStatus RowStatus
  sapAtmVcRangeLastMgmtChange TimeStamp
  sapAtmVcRangeVpiStart AtmVpIdentifier
  sapAtmVcRangeVpiEnd AtmVpIdentifier
  sapAtmVcRangeVciStart AtmVcIdentifier
  sapAtmVcRangeVciEnd AtmVcIdentifier

MsapAtmPlcyEntry  
SEQUENCE    
  msapAtmPlcyLastChanged TimeStamp
  msapAtmPlcyIngTrafficDescIndex AtmTrafficDescrParamIndex
  msapAtmPlcyEgrTrafficDescIndex AtmTrafficDescrParamIndex
  msapAtmPlcyOamAlarmCellHandling ServiceAdminStatus
  msapAtmPlcyOamPeriodicLoopback ServiceAdminStatus

SapEthCfmEntry  
SEQUENCE    
  sapEthCfmRowLastChanged TimeStamp
  sapEthCfmTunnelFaultNotification INTEGER
  sapEthCfmMcLagPropHoldTimeRemain Unsigned32
  sapEthCfmAisEnable TruthValue
  sapEthCfmVMepFilter TruthValue

SapEgrEncapGroupEntry  
SEQUENCE    
  sapEgrEncapGroupName TNamedItem
  sapEgrEncapGroupRowStatus RowStatus
  sapEgrEncapGroupLastChanged TimeStamp
  sapEgrEncapGroupType TSapEgrEncapGroupType
  sapEgrEncapGroupQosPerMember TruthValue
  sapEgrEncapGroupQosPolicyId TSapEgrEncapGrpQosPolicyIdOrZero
  sapEgrEncapGroupSchedulerPolicy TNamedItemOrEmpty
  sapEgrEncapGroupAggRateLimit TPortSchedulerPIR
  sapEgrEncapGrpFrameBasedAccnt TruthValue

SapEgrEncapGrpMemberActEntry  
SEQUENCE    
  sapEgrEncapGroupBeginMember SvcISID
  sapEgrEncapGroupEndMember SvcISID
  sapEgrEncapGroupMemberAction TSapEgrEncapGroupActionType

SapEgrEncapGrpMemberEntry  
SEQUENCE    
  sapEgrEncapGrpMember SvcISID
  sapEgrEncapGrpRangeEndId SvcISID
  sapEgrEncapGrpMemberLastChanged TimeStamp

SapAtmPppStatsEntry  
SEQUENCE    
  sapAtmPppStatsRxPackets Counter32
  sapAtmPppStatsRxDropped Counter32
  sapAtmPppStatsTxPackets Counter32

SapEgrEGBaseStEntry  
SEQUENCE    
  sapEgrEGBaseStLastClearedTime TimeStamp
  sapEgrEGBaseStCustId TmnxCustId
  sapEgrEGBaseStQcDpdInPfPkts Counter64
  sapEgrEGBaseStQcDpdInPfPktsL Counter32
  sapEgrEGBaseStQcDpdInPfPktsH Counter32
  sapEgrEGBaseStQcDpdInPfOcts Counter64
  sapEgrEGBaseStQcDpdInPfOctsL Counter32
  sapEgrEGBaseStQcDpdInPfOctsH Counter32
  sapEgrEGBaseStQcDpdOutPfPkts Counter64
  sapEgrEGBaseStQcDpdOutPfPktsL Counter32
  sapEgrEGBaseStQcDpdOutPfPktsH Counter32
  sapEgrEGBaseStQcDpdOutPfOcts Counter64
  sapEgrEGBaseStQcDpdOutPfOctsL Counter32
  sapEgrEGBaseStQcDpdOutPfOctsH Counter32
  sapEgrEGBaseStQcFwdInPfPkts Counter64
  sapEgrEGBaseStQcFwdInPfPktsL Counter32
  sapEgrEGBaseStQcFwdInPfPktsH Counter32
  sapEgrEGBaseStQcFwdInPfOcts Counter64
  sapEgrEGBaseStQcFwdInPfOctsL Counter32
  sapEgrEGBaseStQcFwdInPfOctsH Counter32
  sapEgrEGBaseStQcFwdOutPfPkts Counter64
  sapEgrEGBaseStQcFwdOutPfPktsL Counter32
  sapEgrEGBaseStQcFwdOutPfPktsH Counter32
  sapEgrEGBaseStQcFwdOutPfOcts Counter64
  sapEgrEGBaseStQcFwdOutPfOctsL Counter32
  sapEgrEGBaseStQcFwdOutPfOctsH Counter32

SapEgrEGMbrBaseStEntry  
SEQUENCE    
  sapEgrEGMbrBaseStLstClearedTime TimeStamp
  sapEgrEGMbrBaseStCustId TmnxCustId
  sapEgrEGMbrBaseStQcDpdInPfPkts Counter64
  sapEgrEGMbrBaseStQcDpdInPfPktsL Counter32
  sapEgrEGMbrBaseStQcDpdInPfPktsH Counter32
  sapEgrEGMbrBaseStQcDpdInPfOcts Counter64
  sapEgrEGMbrBaseStQcDpdInPfOctsL Counter32
  sapEgrEGMbrBaseStQcDpdInPfOctsH Counter32
  sapEgrEGMbrBaseStQcDpdOutPfPkts Counter64
  sapEgrEGMbrBaseStQcDpdOutPfPktsL Counter32
  sapEgrEGMbrBaseStQcDpdOutPfPktsH Counter32
  sapEgrEGMbrBaseStQcDpdOutPfOcts Counter64
  sapEgrEGMbrBaseStQcDpdOutPfOctsL Counter32
  sapEgrEGMbrBaseStQcDpdOutPfOctsH Counter32
  sapEgrEGMbrBaseStQcFwdInPfPkts Counter64
  sapEgrEGMbrBaseStQcFwdInPfPktsL Counter32
  sapEgrEGMbrBaseStQcFwdInPfPktsH Counter32
  sapEgrEGMbrBaseStQcFwdInPfOcts Counter64
  sapEgrEGMbrBaseStQcFwdInPfOctsL Counter32
  sapEgrEGMbrBaseStQcFwdInPfOctsH Counter32
  sapEgrEGMbrBaseStQcFwdOutPfPkts Counter64
  sapEgrEGMbrBaseStQcFwdOutPfPktsL Counter32
  sapEgrEGMbrBaseStQcFwdOutPfPktsH Counter32
  sapEgrEGMbrBaseStQcFwdOutPfOcts Counter64
  sapEgrEGMbrBaseStQcFwdOutPfOctsL Counter32
  sapEgrEGMbrBaseStQcFwdOutPfOctsH Counter32

SapEgrEGQueueStEntry  
SEQUENCE    
  sapEgrEGQueueId TSapEgrQueueId
  sapEgrEGCustId TmnxCustId
  sapEgrEGQueueStFwdInPfPkts Counter64
  sapEgrEGQueueStFwdInPfPktsL Counter32
  sapEgrEGQueueStFwdInPfPktsH Counter32
  sapEgrEGQueueStDpdInPfPkts Counter64
  sapEgrEGQueueStDpdInPfPktsL Counter32
  sapEgrEGQueueStDpdInPfPktsH Counter32
  sapEgrEGQueueStFwdOutPfPkts Counter64
  sapEgrEGQueueStFwdOutPfPktsL Counter32
  sapEgrEGQueueStFwdOutPfPktsH Counter32
  sapEgrEGQueueStDpdOutPfPkts Counter64
  sapEgrEGQueueStDpdOutPfPktsL Counter32
  sapEgrEGQueueStDpdOutPfPktsH Counter32
  sapEgrEGQueueStFwdInPfOcts Counter64
  sapEgrEGQueueStFwdInPfOctsL Counter32
  sapEgrEGQueueStFwdInPfOctsH Counter32
  sapEgrEGQueueStDpdInPfOcts Counter64
  sapEgrEGQueueStDpdInPfOctsL Counter32
  sapEgrEGQueueStDpdInPfOctsH Counter32
  sapEgrEGQueueStFwdOutPfOcts Counter64
  sapEgrEGQueueStFwdOutPfOctsL Counter32
  sapEgrEGQueueStFwdOutPfOctsH Counter32
  sapEgrEGQueueStDpdOutPfOcts Counter64
  sapEgrEGQueueStDpdOutPfOctsL Counter32
  sapEgrEGQueueStDpdOutPfOctsH Counter32

SapEgrEGMbrQueueStEntry  
SEQUENCE    
  sapEgrEGMbrQueueId TSapEgrQueueId
  sapEgrEGMbrQueueCustId TmnxCustId
  sapEgrEGMbrQueueStFwdInPfPkts Counter64
  sapEgrEGMbrQueueStFwdInPfPktsL Counter32
  sapEgrEGMbrQueueStFwdInPfPktsH Counter32
  sapEgrEGMbrQueueStDpdInPfPkts Counter64
  sapEgrEGMbrQueueStDpdInPfPktsL Counter32
  sapEgrEGMbrQueueStDpdInPfPktsH Counter32
  sapEgrEGMbrQueueStFwdOutPfPkts Counter64
  sapEgrEGMbrQueueStFwdOutPfPktsL Counter32
  sapEgrEGMbrQueueStFwdOutPfPktsH Counter32
  sapEgrEGMbrQueueStDpdOutPfPkts Counter64
  sapEgrEGMbrQueueStDpdOutPfPktsL Counter32
  sapEgrEGMbrQueueStDpdOutPfPktsH Counter32
  sapEgrEGMbrQueueStFwdInPfOcts Counter64
  sapEgrEGMbrQueueStFwdInPfOctsL Counter32
  sapEgrEGMbrQueueStFwdInPfOctsH Counter32
  sapEgrEGMbrQueueStDpdInPfOcts Counter64
  sapEgrEGMbrQueueStDpdInPfOctsL Counter32
  sapEgrEGMbrQueueStDpdInPfOctsH Counter32
  sapEgrEGMbrQueueStFwdOutPfOcts Counter64
  sapEgrEGMbrQueueStFwdOutPfOctsL Counter32
  sapEgrEGMbrQueueStFwdOutPfOctsH Counter32
  sapEgrEGMbrQueueStDpdOutPfOcts Counter64
  sapEgrEGMbrQueueStDpdOutPfOctsL Counter32
  sapEgrEGMbrQueueStDpdOutPfOctsH Counter32

SapEgrEGSchedStEntry  
SEQUENCE    
  sapEgrEGSchedStName TNamedItem
  sapEgrEGSchedCustId TmnxCustId
  sapEgrEGSchedStFwdPkts Counter64
  sapEgrEGSchedStFwdPktsL Counter32
  sapEgrEGSchedStFwdPktsH Counter32
  sapEgrEGSchedStFwdOcts Counter64
  sapEgrEGSchedStFwdOctsL Counter32
  sapEgrEGSchedStFwdOctsH Counter32

SapEgrEGMbrSchedStEntry  
SEQUENCE    
  sapEgrEGMbrSchedStName TNamedItem
  sapEgrEGMbrSchedCustId TmnxCustId
  sapEgrEGMbrSchedStFwdPkts Counter64
  sapEgrEGMbrSchedStFwdPktsL Counter32
  sapEgrEGMbrSchedStFwdPktsH Counter32
  sapEgrEGMbrSchedStFwdOcts Counter64
  sapEgrEGMbrSchedStFwdOctsL Counter32
  sapEgrEGMbrSchedStFwdOctsH Counter32

SapPortIdEgrEGSchedStEntry  
SEQUENCE    
  sapPortIdEgrEGSchedStName TNamedItem
  sapPortIdEgrEGSchedCustId TmnxCustId
  sapPortIdEgrEGSchedFwdPkts Counter64
  sapPortIdEgrEGSchedFwdPktsL Counter32
  sapPortIdEgrEGSchedFwdPktsH Counter32
  sapPortIdEgrEGSchedFwdOcts Counter64
  sapPortIdEgrEGSchedFwdOctsL Counter32
  sapPortIdEgrEGSchedFwdOctsH Counter32

SapPortIdEgrEGMbrSchedStEntry  
SEQUENCE    
  sapPortIdEgrEGMbrSchedStName TNamedItem
  sapPortIdEgrEGMbrSchedCustId TmnxCustId
  sapPortIdEgrEGMbrSchedFwdPkts Counter64
  sapPortIdEgrEGMbrSchedFwdPktsL Counter32
  sapPortIdEgrEGMbrSchedFwdPktsH Counter32
  sapPortIdEgrEGMbrSchedFwdOcts Counter64
  sapPortIdEgrEGMbrSchedFwdOctsL Counter32
  sapPortIdEgrEGMbrSchedFwdOctsH Counter32

SapDefHostEntry  
SEQUENCE    
  sapDefHostIpv4SubnetAddr IpAddress
  sapDefHostIpv4SubnetMask IpAddress
  sapDefHostLastChanged TimeStamp
  sapDefHostRowStatus RowStatus
  sapDefHostNextHopIpv4Addr IpAddress

TmnxIpTunnelEntry  
SEQUENCE    
  tmnxIpTunnelName TNamedItem
  tmnxIpTunnelRowStatus RowStatus
  tmnxIpTunnelLastChanged TimeStamp
  tmnxIpTunnelGreHeader TruthValue
  tmnxIpTunnelDescription TItemDescription
  tmnxIpTunnelLclIpAddrType InetAddressType
  tmnxIpTunnelLclIpAddr InetAddress
  tmnxIpTunnelRemIpAddrType InetAddressType
  tmnxIpTunnelRemIpAddr InetAddress
  tmnxIpTunnelBackupRemIpAddrType InetAddressType
  tmnxIpTunnelBackupRemIpAddr InetAddress
  tmnxIpTunnelOperRemIpAddrType InetAddressType
  tmnxIpTunnelOperRemIpAddr InetAddress
  tmnxIpTunnelDeliverySvcId TmnxServId
  tmnxIpTunnelAdminState TmnxAdminState
  tmnxIpTunnelOperState TmnxOperState
  tmnxIpTunnelOperFlags BITS
  tmnxIpTunnelDscp TDSCPNameOrEmpty
  tmnxIpTunnelReassembly Integer32
  tmnxIpTunnelClearDfBit TruthValue
  tmnxIpTunnelIpMtu Unsigned32
  tmnxIpTunnelHostISA TmnxHwIndexOrZero

TmnxIpTnlDstAddrEntry  
SEQUENCE    
  tmnxIpTnlDstAddrType InetAddressType
  tmnxIpTnlDstAddr InetAddress
  tmnxIpTnlDstAddrRowStatus RowStatus
  tmnxIpTnlDstAddrLastChanged TimeStamp

TmnxIpTunnelStatsEntry  
SEQUENCE    
  tmnxIpTunnelPktsTx Counter64
  tmnxIpTunnelPktsTxLo Counter32
  tmnxIpTunnelPktsTxHi Counter32
  tmnxIpTunnelPktsRx Counter64
  tmnxIpTunnelPktsRxLo Counter32
  tmnxIpTunnelPktsRxHi Counter32
  tmnxIpTunnelBytesTx Counter64
  tmnxIpTunnelBytesTxLo Counter32
  tmnxIpTunnelBytesTxHi Counter32
  tmnxIpTunnelBytesRx Counter64
  tmnxIpTunnelBytesRxLo Counter32
  tmnxIpTunnelBytesRxHi Counter32
  tmnxIpTunnelTxErrors Counter32
  tmnxIpTunnelRxErrors Counter32
  tmnxIpTunnelKeyIgnoredRx Counter64
  tmnxIpTunnelKeyIgnoredRxLo Counter32
  tmnxIpTunnelKeyIgnoredRxHi Counter32
  tmnxIpTunnelSeqIgnoredRx Counter64
  tmnxIpTunnelSeqIgnoredRxLo Counter32
  tmnxIpTunnelSeqIgnoredRxHi Counter32
  tmnxIpTunnelVersUnsupRx Counter64
  tmnxIpTunnelVersUnsupRxLo Counter32
  tmnxIpTunnelVersUnsupRxHi Counter32
  tmnxIpTunnelInvalidChksumRx Counter64
  tmnxIpTunnelInvalidChksumRxLo Counter32
  tmnxIpTunnelInvalidChksumRxHi Counter32
  tmnxIpTunnelLoopsRx Counter64
  tmnxIpTunnelLoopsRxLo Counter32
  tmnxIpTunnelLoopsRxHi Counter32
  tmnxIpTunnelTooBigTx Counter64
  tmnxIpTunnelTooBigTxLo Counter32
  tmnxIpTunnelTooBigTxHi Counter32

Defined Values

timetraSvcSapMIBModule 1.3.6.1.4.1.6527.1.1.3.55
This document is the SNMP MIB module to manage and provision the various services of the Alcatel-Lucent SROS system. Copyright 2003-2013 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxSapObjs 1.3.6.1.4.1.6527.3.1.2.4.3
OBJECT IDENTIFIER    

tmnxSapNotifyObjs 1.3.6.1.4.1.6527.3.1.2.4.3.100
OBJECT IDENTIFIER    

tmnxSapConformance 1.3.6.1.4.1.6527.3.1.1.4.3
OBJECT IDENTIFIER    

sapTrapsPrefix 1.3.6.1.4.1.6527.3.1.3.4.3
OBJECT IDENTIFIER    

sapTraps 1.3.6.1.4.1.6527.3.1.3.4.3.0
OBJECT IDENTIFIER    

sapNumEntries 1.3.6.1.4.1.6527.3.1.2.4.3.1
The current number of SAPs configured in this device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapBaseInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.2
A table that contains basic SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapBaseInfoEntry

sapBaseInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.2.1
Information about a specific SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapBaseInfoEntry  

sapPortId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.1
The ID of the access port where this SAP is defined.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPortID  

sapEncapValue 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.2
The value of the label used to identify this SAP on the access port specified by sapPortId.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEncapVal  

sapRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.3
This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapType 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.4
This object indicates the type of service where this SAP is defined.
Status: current Access: read-only
OBJECT-TYPE    
  ServType  

sapDescription 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.5
Generic information about this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjDesc  

sapAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.6
The desired state of this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAdminStatus  

sapOperStatus 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.7
The value of the object sapOperStatus indicates the operating state of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), ingressQosMismatch(3), egressQosMismatch(4), portMtuTooSmall(5), svcAdminDown(6), iesIfAdminDown(7)  

sapIngressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.8
The value of the object sapIngressQosPolicyId specifies the row index in the tSapIngressTable corresponding to this ingress QoS policy, or one if no policy is specified. The value 0 is needed for mirror SAPs that cannot have a QoS policy assigned.
Status: current Access: read-create
OBJECT-TYPE    
  TSapIngressPolicyID  

sapIngressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.9
The value of the object sapIngressMacFilterId specifies the row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapIngressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.10
The value of the object sapIngressIpFilterId specifies the row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapEgressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.11
The row index in the tSapEgressTable corresponding to this egress QoS policy, or one if no policy is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TSapEgressPolicyID  

sapEgressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.12
The row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapEgressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.13
The row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapMirrorStatus 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.14
This object specifies whether traffic mirroring has been enabled on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ingress(1), egress(2), ingressAndEgress(3), disabled(4)  

sapIesIfIndex 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.15
When the value of sapType is 'ies' this object specifies the index of the IES interface where this SAP is defined. The value of this object can be set only when the row is created and cannot be changed while the row status is 'active'. This object is otherwise not significant and should have the value zero.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

sapLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.16
The value of sysUpTime at the time of the most recent management-initiated change to this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapCollectAcctStats 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.17
When the value of this object is 'true' the agent collects accounting statistics on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapAccountingPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.18
This object specifies the policy to use to collect accounting statistics on this SAP. The value zero indicates that the agent should use the default accounting policy, if one exists.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

sapVpnId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.19
The VPN ID of the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  VpnId  

sapCustId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.20
The Customer ID of the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapCustMultSvcSite 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.21
The value of this object, when not null, indicates the Multi-Service Site this SAP is a member of. This information is used to configure the ingress and egress QoS schedulers for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapIngressQosSchedulerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.22
This object can be set only when sapCustMultSvcSite is null. It indicates the ingress QoS scheduler for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapEgressQosSchedulerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.23
This object can be set only when sapCustMultSvcSite is null. It indicates the egress QoS scheduler for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSplitHorizonGrp 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.24
This object specifies the name of the split-horizon group where the SAP belongs to. This object can be set only at the time the row is created. Per default a SAP does not belong to any split-horizon group. The name specified must correspond to an existing split- horizon group in the TLS service where this SAP is defined.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapIngressSharedQueuePolicy 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.25
This object indicates the ingress shared queue policy used by this SAP. When the value of this object is null it means that the SAP will use individual ingress QoS queues, instead of the shared ones.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapIngressMatchQinQDot1PBits 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.26
This object applies only to SAP's defined on a port configured for qinq service encapsulation. It indicates which 802.1P bits will be used to match a QoS or a MAC filter policy when a double-tagged frame is received on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER default(1), top(2), bottom(3)  

sapOperFlags 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.27
This object specifies all the conditions that affect the operating status of this SAP. The bit values are: sapAdminDown (0) - SAP is admin down. svcAdminDown (1) - Service is admin down. iesIfAdminDown (2) - IP interface is admin down (IES and VPRN only). portOperDown (3) - Access port is oper down. portMtuTooSmall (4) - Access port's MTU is < Service MTU l2OperDown (5) - L2 PVC/PVP is oper down (FR and ATM only). ingressQosMismatch (6) - Mismatch between ingress QoS and Scheduler policies. egressQosMismatch (7) - Mismatch between egress QoS and Scheduler policies. relearnLimitExceeded (8) - MAC relearn limit was exceeded (TLS only). recProtSrcMac (9) - Received a packet with a protected source MAC (TLS only). subIfAdminDown (10) - Subscriber interface is admin down (group-interface SAP only). sapIpipeNoCeIpAddr (11) - CE IP Address not configured for Ipipe SAP (IPIPE SAP only). sapTodResourceUnavail (12) - SAP with ToD had insufficient resources at boot time and got default policies. sapTodMssResourceUnavail (13) - MSS of this SAP uses ToD and due to insufficient resources at boot time got default scheduler policies. sapParamMismatch (14) - Service specific local parameter mismatch. sapCemNoEcidOrMacAddr (15) - ECID or MAC address not configured (CEM SAP only). sapStandbyForMcRing (16) - mc-ring keeps this SAP standby for the corresponding SAP on peer. sapSvcMtuTooSmall (17) - Service MTU is < SAP payload. ingressNamedPoolMismatch (18) - Invalid named-pool on the ingress side. egressNamedPoolMismatch (19) - Invalid named-pool on the egress side. ipMirrorNoMacAddr (20) - No MAC Address configured for the ip-mirror. sapEpipeNoRingNode (21) - No TIMETRA-MC-REDUNDANCY-MIB ::tmnxMcEpipeSapEntry object configured for Epipe SAP (EPIPE SAP only). mcStandby (22) - indicates the SAP is standby because of a mutli-chassis protocol. mhStandby (23) - indicates the SAP is standby because of a BGP multi-home protocol. oamDownMepFault (24) - ETH-CFM down MEP fault detected. oamUpMepFault (25) - ETH-CFM up MEP fault detected. ethTunTagMisconfig (26) - Missing Eth-tunnel SAP tag(s). ingressPolicerMismatch (27)- indicate ingress policer - is parented to non-existent arbiter egressPolicerMismatch (28) - indicate egress policer - is parented to non-existent arbiter. sapTlsNoRingNode (29) - No TIMETRA-MC-REDUNDANCY-MIB ::tmnxMcTlsSapEntry object configured for TLS SAP (VPLS SAP only). ethRingPathBlocked (30) - indicates eth-ring path is blocked. oamTunnelMepFault (31) - ETH-CFM Tunnel MEP fault detected. operGrpDown (32) - indicates operational-group is down.
Status: current Access: read-only
OBJECT-TYPE    
  BITS sapAdminDown(0), svcAdminDown(1), iesIfAdminDown(2), portOperDown(3), portMtuTooSmall(4), l2OperDown(5), ingressQosMismatch(6), egressQosMismatch(7), relearnLimitExceeded(8), recProtSrcMac(9), subIfAdminDown(10), sapIpipeNoCeIpAddr(11), sapTodResourceUnavail(12), sapTodMssResourceUnavail(13), sapParamMismatch(14), sapCemNoEcidOrMacAddr(15), sapStandbyForMcRing(16), sapSvcMtuTooSmall(17), ingressNamedPoolMismatch(18), egressNamedPoolMismatch(19), ipMirrorNoMacAddr(20), sapEpipeNoRingNode(21), mcStandby(22), mhStandby(23), oamDownMepFault(24), oamUpMepFault(25), ethTunTagMisconfig(26), ingressPolicerMismatch(27), egressPolicerMismatch(28), sapTlsNoRingNode(29), ethRingPathBlocked(30), oamTunnelMepFault(31), operGrpDown(32)  

sapLastStatusChange 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.28
The value of sysUpTime at the time of the most recent operating status change to this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapAntiSpoofing 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.29
The value of the object sapAntiSpoofing specifies the type of anti-spoof filtering applicable on this SAP. 'nextHopIpAndMacAddr (4)' is not supported on SR-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), sourceIpAddr(1), sourceMacAddr(2), sourceIpAndMacAddr(3), nextHopIpAndMacAddr(4)  

sapIngressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.30
The value of the object sapIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapEgressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.31
The value of the object sapEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapTodSuite 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.32
The value of the object sapTodSuite specifies the Time of Day (ToD) suite to be applied on this SAP. An empty string indicates that no ToD suite is applied on this SAP. A set request will only be allowed, if the indicated suite is defined in TIMETRA-SCHEDULER-MIB::tmnxTodSuiteTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapIngUseMultipointShared 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.33
When the value of sapIngressSharedQueuePolicy is not null, the value of the object sapIngUseMultipointShared specifies whether this SAP uses the multipoint-shared queues of the shared policy.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgressQinQMarkTopOnly 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.34
When the encapsulation type of the access port where this SAP is defined is qinq, the value of the object sapEgressQinQMarkTopOnly specifies which P-bits to mark during packet egress. When the value is false both set of P-bits are marked. When the value is true, only the P-bits in the top Q-tag are marked.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgressAggRateLimit 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.35
The value of the object sapEgressAggRateLimit specifies the maximum total rate of all egress queues for this SAP. The value '-1' means that there is no limit.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

sapEndPoint 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.36
The value of the object sapEndPoint specifies the service endpoint to which this SAP is attached. The svcId of the SAP MUST match the svcId of the service endpoint.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapIngressVlanTranslation 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.37
The value of sapIngressVlanTranslation specifies the desired Ingress Vlan Translation. A value of 'vlanId' specifies that the value of sapIngressVlanTranslationId is to be used to overwrite the preserved VLAN id in the packet. A value of 'copyOuter' specifies that the outer VLAN id should be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sapIngressVlanTranslation to 'vlanId' and sapIngressVlanTranslationId is set to '-1'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), vlanId(2), copyOuter(3)  

sapIngressVlanTranslationId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.38
The value of sapIngressVlanTranslationId specifies the VLAN id to be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sapIngressVlanTranslationId to other than '-1' and sapIngressVlanTranslation is not set to 'vlanId'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..4094  

sapSubType 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.39
The value of the object sapSubType indicates the sub-type for this SAP. A value of 'regular' indicates a standard SAP. A value of 'capture' specifies a capturing SAP in which triggering packets will be sent to the CPM. Non-triggering packets captured by the 'capture' SAP will be dropped. A value of 'managed' indicates a managed SAP which was created dynamically after receiving triggering packets on a SAP with a sapSubType value of 'capture'. Entries with a value of 'managed' are not user editable and are not maintained in the configuration file. A value of 'video' indicates a video SAP which terminates on a video SAP. Entries with a value of 'video' are not user editable and are not maintained in the configuration file. A value of 'internal' indicates an internal SAP which was created by the system. Entries with a value of 'internal' are not user editable and are not maintained in the configuration file. Whereas any of the five values may be returned in in response to an SNMP GET request, only two values may be specified in an SNMP SET request: 'regular' and 'capture'. An attempt to specify a value of 'managed', 'video' or 'internal' in an SNMP SET request will fail with an error of 'inconsistentValue'. The value of this object cannot be changed after creation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER regular(0), capture(1), managed(2), video(3), internal(4)  

sapCpmProtPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.40
The value of sapCpmProtPolicyId associates a CPM Protection policy with a SAP. A value of zero (0) specifies that no CPM Protection policy is associated with this SAP. A value of 254 specifies that the default CPM Protection policy is associated with this SAP. If no value for sapCpmProtPolicyId is specified when the sapBaseInfoEntry is created, the system assigns a default value as follows: if the system creates a corresponding entry in the sapSubMgmtInfoTable, the default value is 254; otherwise, the default value is 'zero'. This means that all SAP's that support Enhanced Subscriber Management get a default value of 254. If a SAP would get a default value of 254, it is not allowed to set the value of sapCpmProtPolicyId to 'zero'. If a SAP would get a default value of 'zero', it is not allowed to modify the value of sapCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
Status: current Access: read-create
OBJECT-TYPE    
  TCpmProtPolicyID  

sapCpmProtMonitorMac 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.41
The value of sapCpmProtMonitorMac specifies whether or not to apply the tmnxCpmProtPolPerSrcRateLimit of this SAP's CPM Protection policy to packets served by the SAP, on a per source MAC address basis. For example, suppose sapCpmProtMonitorMac is 'true', and this SAP's sapCpmProtPolicyId points to a policy table row with tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two source MAC addresses each send 150 packets/second to this SAP. Approx. 50 packets/second from each source will be discarded. If the value of sapCpmProtPolicyId is equal to zero, the value of sapCpmProtMonitorMac is irrelevant and will be ignored. At most one of the following options can be enabled on this SAP: 1. sapCpmProtMonitorMac, 2. The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)', 3. sapCpmProtMonitorIP. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgressFrameBasedAccounting 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.42
The value of sapEgressFrameBasedAccounting specifies whether to use frame-based accounting when evaluating sapEgressAggRateLimit for all egress queues for this SAP. If the value is 'false', the default packet-based accounting method will be used.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapIngressAggRateLimit 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.43
The value of the object sapIngressAggRateLimit specifies the maximum total rate of all ingress queues for this SAP. The value '-1' means that there is no limit. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

sapEgressHsmdaShaperOverride 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.44
The value of the object sapEgressHsmdaShaperOverride specifies the name of the secondary shaper for this SAP. The value must correspond to an entry in the tmnxPortEgrShaperTable. If the empty string is specified, the default secondary shaper will be used.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapIngressHsmdaPacketOffOvr 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.45
The value of sapIngressHsmdaPacketOffOvr specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting on ingress. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TIngHsmdaPerPacketOffsetOvr  

sapEgressHsmdaPacketOffOverride 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.46
The value of sapEgressHsmdaPacketOffOverride specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting on ingress.
Status: current Access: read-create
OBJECT-TYPE    
  TEgrHsmdaPerPacketOffsetOvr  

sapCallingStationId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.47
The value of sapCallingStationId specifies the calling-station-id to be included in all RADIUS authentication and accounting requests if configured to be included in the corresponding RADIUS authentication or accounting policy. If the empty string is specified, no calling-station-id will be included.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

sapIsaAaApplicationProfile 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.48
The value of sapIsaAaApplicationProfile specifies the ISA-AA application profile for this sap. The specified application profile needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapIngPolicerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.49
The value of sapIngPolicerPolicy specifies the ingress policer control policy applicable to this subscriber profile.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapEgrPolicerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.50
The value of sapEgrPolicerPolicy specifies the egress policer control policy applicable to this subscriber profile.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTmplUsed 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.51
The value of sapTmplUsed indicates the name of the sap-template used to create this sap. A value of empty-string indicates that this sap was not created using a sap-template.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapEthRingIndex 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.52
The value of sapEthRingIndex specifies the Ethernet Ring associated with this SAP. This object, if required, MUST be configured during the row creation of the sapBaseInfoTable row, and MUST reference an existing row in TIMETRA-ETH-RING-MIB::tmnxEthRingConfigTable. The value zero, the default value, specifies there is no Ethernet Ring associated with this SAP. This object can not be changed once set; the SAP MUST be destroyed and re-created to change the sapEthRingIndex object.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

sapIngressFlowspec 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.53
The value of sapIngressFlowspec specifies whether ingress Flowspec is enabled for this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapCpmProtEthCfmMonitorFlags 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.54
The value of sapCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by the SAP. Two associated options are also specified. Five combinations of flag values are supported, as shown in the following table. Flag Value (0=Disabled, 1=Enabled) ------------------------------------- ----------------------------- 'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1 'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1 'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1 ------------------------------------- ----------------------------- Supported Combination? Y N N N Y Y Y Y If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on this SAP. If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on this SAP. Excess packets are discarded. The configured information used to perform the Eth-CFM rate limiting (e.g. the rate limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the SAP's sapCpmProtPolicyId. At most one of the following options can be enabled on this SAP: 1. sapCpmProtMonitorMac, 2. The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)', 3. sapCpmProtMonitorIP. The flags 'ethCfmMonitorAggregate(1)' and 'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM rate limiting. Therefore, they are only significant if Eth-CFM rate limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled. If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer (i.e. on a source MAC address basis). For example, if the SAP's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by the SAP, then 100 Eth-CFM packets/sec from each peer is within the limit. If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the aggregated traffic flow. For example, if the SAP's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by this SAP, then the combined rate of the two peers cannot exceed 100 packets/sec. 'ethCfmMonitorCommittedAccessRate(2)' controls the interaction between two features: Eth-CFM rate limiting, and overall rate limiting (as configured using tmnxCpmProtPolOverallRateLimit). If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM packet is subjected to two rate limits, in the following order. a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as described above. If the packet exceeds the limit, it is discarded. Otherwise... b) The SAP's tmnxCpmProtPolOverallRateLimit (which is applied to Eth-CFM packets, and the other rate limited packet types) is applied. If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet is subjected to one rate limit: the applicable tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets are neither counted nor discarded when performing the tmnxCpmProtPolOverallRateLimit rate limiting.
Status: current Access: read-create
OBJECT-TYPE    
  BITS ethCfmMonitor(0), ethCfmMonitorAggregate(1), ethCfmMonitorCommittedAccessRate(2)  

sapTransitIpPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.55
The value of sapTransitIpPolicyId specifies the transit IP policy to be associated with this SAP. The value must either be '0' indicating an invalid transit IP policy or the specified transit IP policy needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxTransitIpPolicyTable. At most one of sapTransitIpPolicyId and sapTransitPrefixPolicyId can be non-zero.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxBsxTransitIpPolicyIdOrZero  

sapOperGrp 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.56
The value of the sapOperGrp specifies the Operational-Group identifier associated with this SAP. An 'inconsistentValue' error is returned when both sapOperGrp and sapMonitorOperGrp are set together and atleast one of them to a non-default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapMonitorOperGrp 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.57
The value of the sapMonitorOperGrp specifies the Operational-Group identifier which will affect the state of this SAP. An 'inconsistentValue' error is returned when both sapOperGrp and sapMonitorOperGrp are set together and atleast one of them to a non-default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapEgressHsmdaWrrPolicyOvr 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.58
The value of the sapEgressHsmdaWrrPolicyOvr specifies the egress hsmda weighted round-robin policy override for this SAP. When no policy is given, the hsmda weighted round-robin policy specified in the sap-egress policy is honored. When a valid policy is given, it is used instead of the hsmda weighted round-robin policy given in the sap-egress policy.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTransitPrefixPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.59
The value of sapTransitPrefixPolicyId specifies the transit prefix policy to be associated with this SAP. The value must either be '0' indicating an invalid transit prefix policy or the specified transit prefix policy needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxTransPrefPolicyTable. At most one of sapTransitIpPolicyId and sapTransitPrefixPolicyId can be non-zero.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxBsxTransPrefPolicyIdOrZero  

sapCpmProtMonitorIP 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.60
The value of sapCpmProtMonitorIP specifies whether or not to apply the tmnxCpmProtPolPerSrcRateLimit of this SAP's CPM Protection policy to IPv4 DHCP packets served by the SAP, on a per source IP address basis. For example, suppose sapCpmProtMonitorIP is 'true', and this SAP's sapCpmProtPolicyId points to a policy table row with tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two source IP addresses (e.g. 138.120.141.173 and 138.120.141.174) each send 150 DHCP packets/second to this SAP. Approx. 50 DCHP packets/second from each source will be discarded. If the value of sapCpmProtPolicyId is equal to zero, the value of sapCpmProtMonitorIP is irrelevant and will be ignored. At most one of the following options can be enabled on this SAP: 1. sapCpmProtMonitorMac, 2. The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)', 3. sapCpmProtMonitorIP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapHostsAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.61
The value of the object sapHostsAdminState specifies the administrative state of all hosts on this SAP. If set to 'down' no dynamic subscriber hosts can be created, and any active dynamic host on the SAP will be removed.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAdminStatus  

sapHostLockoutPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.62
The value of sapHostLockoutPolicy specifies the Host Lockout Policy for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapAarpId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.63
The value of sapAarpId specifies the AA Redundancy Protocol (AARP) instance associated with this SAP. If set to 0, no AARP instance is associated with this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxBsxAarpIdOrZero  

sapIngressFPQGrp 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.64
The value of sapIngressFPQGrp specifies the forwarding-plane queue group Policy for this SAP. This object must be set along with sapIngressFPQGrpInstanceId object. An 'inconsistentValue' error is returned if sapIngressFPQGrp is set to a non-default value and an entry corresponding to tmnxFPNum to which this SAP belongs does not exist in tmnxFPAccIngQGrpTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapIngressFPQGrpInstanceId 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.65
The value of sapIngressFPQGrpInstanceId specifies the instance of the forwarding-plane ingress Queue Group for this SAP. This object must be set along with sapIngressFPQGrp object. An 'inconsistentValue' error is returned if sapIngressFPQGrp is set to a non-default value and an entry corresponding to tmnxFPNum to which this SAP belongs does not exist in tmnxFPAccIngQGrpTable.
Status: current Access: read-create
OBJECT-TYPE    
  TQosQGrpInstanceIDorZero  

sapAarpServRefType 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.66
The value of sapAarpServRefType specifies the role of the SAP referenced by the AA Redundancy Protocol (AARP) instance identified by sapAarpId. If sapAarpId is the invalid AARP instance '0', then the service reference type is 'none(0)'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxBsxAarpServiceRefType  

sapSiteName 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.67
The value of sapSiteName indicates the site-name associated with this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapIgnoreOperDown 1.3.6.1.4.1.6527.3.1.2.4.3.2.1.68
The value of sapIgnoreOperDown specifiy whether service will ignore when sap is operationally down.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapTlsInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.3
A table that contains TLS SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsInfoEntry

sapTlsInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.3.1
TLS specific information about a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsInfoEntry  

sapTlsStpAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.1
The value of the object sapTlsStpAdminStatus specifies whether this SAP participates in the TLS's Spanning Tree Protocol. A SAP with a non-zero sapEthRingIndex does not participate in the TLS's Spanning Tree Protocol. The default value for sapTlsStpAdminStatus for these SAPs is 'disabled' and may not be set to 'enabled'.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsStpPriority 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.2
The value of the object sapTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

sapTlsStpPortNum 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.3
The value of the object sapTlsStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this SAP. Values in the range 2048..4094 are automatically assigned by the agent when the SAP is created or when the value of this object is set to zero via management. Values in the range 1..2047 can be set via management, to allow this object to have a deterministic value across system reboots.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

sapTlsStpPathCost 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.4
The value of the object sapTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200000000  

sapTlsStpRapidStart 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.5
The value of the object sapTlsStpRapidStart specifies whether Rapid Start is enabled on this SAP. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SAP are driven by the value of the 'HelloTime' instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state. This parameter is also referred to as 'adminEdge'.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsStpBpduEncap 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.6
The value of the object sapTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SAP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dynamic(1), dot1d(2), pvst(3)  

sapTlsStpPortState 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.7
The value of the object sapTlsStpPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state.
Status: current Access: read-only
OBJECT-TYPE    
  TStpPortState  

sapTlsStpDesignatedBridge 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.8
The value of the object sapTlsStpDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

sapTlsStpDesignatedPort 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.9
The value of the object sapTlsStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapTlsStpForwardTransitions 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.10
The value of the object sapTlsStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpInConfigBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.11
The value of the object sapTlsStpInConfigBpdus indicates the number of Configuration BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpInTcnBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.12
The value of the object sapTlsStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpInBadBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.13
This object specifies the number of bad BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOutConfigBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.14
The value of the object sapTlsStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOutTcnBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.15
This object specifies the number of Topology Change Notification BPDUs sent out this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOperBpduEncap 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.16
The value of the object sapTlsStpOperBpduEncap indicates the operating encapsulation type used on BPDUs sent out and received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), dot1d(2), pvst(3)  

sapTlsVpnId 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.17
The value of the object sapTlsVpnId indicates the VPN ID of the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  VpnId  

sapTlsCustId 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.18
The Customer ID of the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapTlsMacAddressLimit 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.19
The value of the object sapTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB of this SAP. The value 0 means: no limit for this SAP. The maximum value of sapTlsMacAddressLimit is '511999', when the the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'd'. The maximum value of sapTlsMacAddressLimit is '196607', when the the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'c'. In other cases, the maximum value of sapTlsMacAddressLimit is '131071'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..511999  

sapTlsNumMacAddresses 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.20
The value of the object sapTlsNumMacAddresses indicates the number of MAC addresses currently present in the FDB that belong to this SAP (Both learned and static MAC addresses are counted).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapTlsNumStaticMacAddresses 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.21
The value of the object sapTlsNumStaticMacAddresses indicates the number of static MAC addresses currently present in the FDB that belong to this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapTlsMacLearning 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.22
The value of the object sapTlsMacLearning specifies whether the MAC learning process is enabled for this SAP. The value is ignored if MAC learning is disabled on service level.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsMacAgeing 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.23
The value of the object sapTlsMacAgeing specifies whether the MAC aging process is enabled for this SAP. the value is ignored if MAC aging is disabled on service level.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsStpOperEdge 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.24
The value of the object sapTlsStpOperEdge indicates the operational value of the Edge Port parameter. The object is initialized to the value of sapTlsStpRapidStart and is set FALSE on reception of a BPDU.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsStpAdminPointToPoint 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.25
The value of the object sapTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sap. The value 'forceTrue' means that this port should always be treated as if it is connected to a point-to-point link. The value of 'forceFalse' means that this port should be treated as having a shared media connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forceTrue(0), forceFalse(1)  

sapTlsStpPortRole 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.26
sapTlsStpPortRole indicates the current role of the sap as defined by the Rapid Spanning Tree Protocol.
Status: current Access: read-only
OBJECT-TYPE    
  StpPortRole  

sapTlsStpAutoEdge 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.27
sapTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsStpOperProtocol 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.28
sapTlsStpOperProtocol indicates whether stp, rstp or mstp is running on this SAP. If the protocol is not enabled on this SAP, the value notApplicable is returned.
Status: current Access: read-only
OBJECT-TYPE    
  StpProtocol  

sapTlsStpInRstBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.29
The value of the object sapTlsStpInRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOutRstBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.30
The value of the object sapTlsStpOutRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs sent out on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsLimitMacMove 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.31
When sapTlsLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on this SAP, and it will block it when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' this SAP will not be blocked, and another blockable SAP will be blocked instead.
Status: current Access: read-write
OBJECT-TYPE    
  TlsLimitMacMove  

sapTlsDhcpSnooping 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.32
The value of the object sapTlsDhcpSnooping specifies whether or not DHCP packets received on this SAP will be snooped. This object was made obsolete in the 3.0 release.
Status: obsolete Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsMacPinning 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.33
The value of the object sapTlsMacPinning specifies whether or not MAC address pinning is active on this SAP. The value will be set by default to disabled. However for a SAP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator. Setting the value to enable disables re-learning of MAC addresses on other SAPs or spoke-SDPs within the same VPLS; the MAC address will hence remain attached to the SAP for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsDiscardUnknownSource 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.34
with the object sapTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SAP. When this limit is reached, packets with unknown source MAC address are forwarded by default. By setting sapTlsDiscardUnknownSource to enabled, packets with unknown source MAC will be dropped in stead.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsMvplsPruneState 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.35
The value of sapTlsMvplsPruneState indicates the mVPLS prune state of the SAP. The object will be set to notApplicable if the SAP is not managed by a mVPLS. If the SAP is managed the state reflects whether or not the SAP is pruned by the STP instance running in the mVPLS instance.
Status: current Access: read-only
OBJECT-TYPE    
  MvplsPruneState  

sapTlsMvplsMgmtService 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.36
The value of sapTlsMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxServId  

sapTlsMvplsMgmtPortId 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.37
The value of sapTlsMvplsMgmtPortId indicates the SAP port Id of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPortID  

sapTlsMvplsMgmtEncapValue 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.38
The value of sapTlsMvplsMgmtEncapValue indicates the SAP Encap value of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEncapVal  

sapTlsArpReplyAgent 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.39
The value of the object sapTlsArpReplyAgent specifies the status of the special ARP response mechanism in the system for ARP requests destined to static or dynamic hosts associated with this SAP. disabled: the ARP reply function is not operational enabled: the ARP reply function is enabled without subscriber identification. enabledWithSubscrIdent: the ARP reply function is enabled with subscriber identification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), enabledWithSubscrIdent(3)  

sapTlsStpException 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.40
The value of the object sapTlsStpException indicates whether an STP exception condition is present on this Sap. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link is not able to detect our presence. - downstreamLoopDetected :A loop is detected on this link.
Status: current Access: read-only
OBJECT-TYPE    
  StpExceptionCondition  

sapTlsAuthenticationPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.41
The value of the object sapTlsAuthenticationPolicy specifies which subscriber authentication policy must be applied when a DHCP msg is received on the interface. The authentication policies must be defined in tmnxSubAuthPlcyTable. The policy will only be applied when sapTlsDhcpSnoop is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

sapTlsL2ptTermination 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.42
The value of the object sapTlsL2ptTermination specifies whether received Layer 2 Protocol Tunnel (L2PT) pdu's are terminated on this port or sap.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsBpduTranslation 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.43
The value of the object sapTlsBpduTranslation specifies whether received L2 Protocol Tunnel pdu's are translated before being sent out on this port or sap.
Status: current Access: read-write
OBJECT-TYPE    
  TlsBpduTranslation  

sapTlsStpRootGuard 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.44
The value of the object sapTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsStpInsideRegion 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.45
The value of the object sapTlsStpInsideRegion indicates whether the network connected to the SAP is in the same MST region. It corresponds to the parameter 'infoInternal' in 802.1Q.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsEgressMcastGroup 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.46
The value of the object sapTlsEgressMcastGroup specifies the Egress Multicast Group this SAP belongs to.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsStpInMstBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.47
The value of the object sapTlsStpInMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsStpOutMstBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.48
The value of the object sapTlsStpOutMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs sent out on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsRestProtSrcMac 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.49
The value of the object sapTlsRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of sapTlsRestProtSrcMacAction is 'disable', then the SAP where the protected source MAC was seen will be brought operationally down.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsRestUnprotDstMac 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.50
The value of the object sapTlsRestUnprotDstMac specifies how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address will be dropped.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsStpRxdDesigBridge 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.51
The value of the object sapTlsStpRxdDesigBridge indicates the designated Bridge Identifier in the last BPDU which was received on this SAP. It identifies which bridge is connected to the SAP.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

sapTlsStpRootGuardViolation 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.52
The value of the object sapTlsStpRootGuardViolation indicates whether there is a root-guard violation at the present time. This can only happen when sapTlsStpRootGuard is set to true.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsShcvAction 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.53
The value of the object sapTlsShcvAction indicates whether any action should be triggered when the connectivity check fails.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER alarm(1), remove(2)  

sapTlsShcvSrcIp 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.54
The value of the object sapTlsShcvSrcIp specifies the source IP address used when doing the connectivity check. The value 0.0.0.0 indicates that no host IP address is specified.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sapTlsShcvSrcMac 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.55
The value of the object sapTlsShcvSrcMac specifies the MAC address used when doing the connectivity check. The value 0:0:0:0:0:0 indicates that no host MAC address is specified.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sapTlsShcvInterval 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.56
The value of the object sapTlsShcvInterval specifies the interval in minutes between connectivity checks. Zero means no connectivity checking.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..6000  

sapTlsMvplsMgmtMsti 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.57
The value of the object sapTlsMvplsMgmtMsti indicates the MST-instance in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. A value of 0 indicates the CIST. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.
Status: current Access: read-only
OBJECT-TYPE    
  MstiInstanceIdOrZero  

sapTlsMacMoveNextUpTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.58
The value of the object sapTlsMacMoveNextUpTime counts down the time in seconds until a SAP that has been brought down due to exceeding the TLS svcTlsMacMoveMaxRate, sapOperFlags 'relearnLimitExceeded', is automatically brought up again. When this value is 0xffff, the SAP will never be automatically brought up. When sapOperStatus is 'up', this object counts down the time in seconds until the value of sapTlsMacMoveRateExcdLeft is reset.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapTlsMacMoveRateExcdLeft 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.59
The value of the object sapTlsMacMoveRateExcdLeft counts down the number of times this SAP can exceed the TLS svcTlsMacMoveMaxRate and still be automatically brought up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapTlsRestProtSrcMacAction 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.60
The value of the object sapTlsRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP. When the value of this object is 'disable' the SAP will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarm-only', the SAP will be left up and only a notification, sapReceivedProtSrcMac, will be generated. When the value of this object is 'discardFrame', the SAP will start discarding the frame in addition to generating sapReceivedProtSrcMac notification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), alarm-only(2), discardFrame(3)  

sapTlsL2ptForceBoundary 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.61
The value of sapTlsL2ptForceBoundary specifies if sapTlsL2ptTermination is enforced for its managed SAP's. Setting the value of the object sapTlsL2ptForceBoundary of a SAP in a Management VPLS to `true' forces all its managed SAP's to have sapTlsL2ptTermination enabled. This value can only be `true' if the SAP belongs to a management VPLS. If this SAP has managed SAP's already with sapTlsL2ptTermination disabled, it is not allowed to set sapTlsL2ptForceBoundary to `true'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsLimitMacMoveLevel 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.62
The value of the object sapTlsLimitMacMoveLevel specifies the hierarchy in which SAPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first. (tertiary is the lowest)
Status: current Access: read-write
OBJECT-TYPE    
  TlsLimitMacMoveLevel  

sapTlsBpduTransOper 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.63
The value of the object sapTlsBpduTransOper indicates the operational bpdu encapsulation used for BPDU translated frames.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undefined(1), disabled(2), pvst(3), stp(4), pvst-rw(5)  

sapTlsDefMsapPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.64
The value of sapTlsDefMsapPolicy specifies the default Managed SAP policy to use to create Managed SAPs when the response from the Radius server does not specify a Managed SAP policy. The value of sapTlsDefMsapPolicy is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The Managed SAP policy must be defined in msapPlcyTable, otherwise an 'inconsistentValue' error will be returned.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

sapTlsL2ptProtocols 4.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.65
The value of the object sapTlsL2ptTermination specifies which L2 Protocol Tunnel pdu's are terminated on this port or sap.
Status: current Access: read-write
OBJECT-TYPE    
  L2ptProtocols  

sapTlsL2ptForceProtocols 4.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.66
The value of the object sapTlsL2ptForceProtocols specifies which L2 Protocol Tunnel pdu's must be terminated by SAP's managed by this SAP. This object is only relevant if the value of the object sapTlsL2ptForceBoundary is 'true'. For every SAP managed by this SAP, each L2 protocol specified by sapTlsL2ptForceProtocols must be terminated, while other L2 protocols may or may not be terminated, depending on the value of sapTlsL2ptProtocols of that managed SAP.
Status: current Access: read-write
OBJECT-TYPE    
  L2ptProtocols  

sapTlsPppoeMsapTrigger 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.67
The value of sapTlsPppoeMsapTrigger specifies whether the receipt of PPPoE trigger packets on a VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsPppoeMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsDhcpMsapTrigger 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.68
The value of sapTlsDhcpMsapTrigger specifies whether the receipt of DHCP trigger packets on this VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsDhcpMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsMrpJoinTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.69
The value of sapTlsMrpJoinTime specifies a timer value in 10ths of seconds which determines the maximum rate at which attribute join messages can be sent on the SAP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

sapTlsMrpLeaveTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.70
The value of sapTlsMrpLeaveTime specifies a timer value in 10ths of seconds which determines the amount of time a registered attribute is held in leave state before the registration is removed.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 30..60  

sapTlsMrpLeaveAllTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.71
The value of sapTlsMrpLeaveAllTime specifies the a timer value in 10ths of seconds which determines the frequency where all attribute declarations on the SAP are all refreshed.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..300  

sapTlsMrpPeriodicTime 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.72
The value of sapTlsMrpPeriodicTime specifies a timer value in 10ths of seconds which determines the frequency of re-transmission of attribute declarations.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..100  

sapTlsMrpPeriodicEnabled 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.73
The value of sapTlsMrpPeriodicEnabled specifies whether re-transmission of attribute declarations is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsPppoePolicy 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.74
The value of sapTlsPppoePolicy specifies the PPPoE policy (defined in TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable) to use to create Managed SAPs via PPPoE with PAP/CHAP authentication. The value of sapTlsPppoePolicy is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The value of sapTlsPppoePolicy is used for PPP sessions where the value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oE' or 'oEoA'. In general, the default value is empty; for a SAP with a sapSubType value of 'capture', the default value is equal to default.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsArpMsapTrigger 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.75
The value of sapTlsArpMsapTrigger specifies whether the receipt of ARP trigger packets on this VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsArpMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsDefMsapService 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.76
The value of sapTlsDefMsapService specifies the service ID of the service where Managed SAP's are created when there is no Radius server available, or the Radius server does not specify the service ID. The value of sapTlsDefMsapService is only relevant for a SAP with a sapSubType value of 'capture'. While the value of sapTlsDefMsapService is equal to zero, no Managed SAP's are created when there is no Radius server-specified service ID available. For a SAP with a sapSubType value other than 'capture', zero is the only value allowed.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxServId  

sapTlsDefMsapGroupIf 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.77
The value of sapTlsDefMsapGroupIf specifies the name of the group interface where Managed SAP's are created when there is no Radius server available, or the Radius server does not specify the group interface. The value of sapTlsDefMsapGroupIf is only relevant for a SAP with a sapSubType value of 'capture'. While the value of sapTlsDefMsapGroupIf is the empty string, no Managed SAP's are created when there is no Radius server-specified group interface available. For a SAP with a sapSubType value other than 'capture', zero is the only value allowed.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsMrpPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.78
The value of sapTlsMrpPolicy specifies the mrp policy to control which Group BMAC attributes will advertise on the egress SAP-SDP.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsSiteName 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.79
The value of sapTlsSiteName indicates the site-name associated with this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsDhcp6MsapTrigger 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.80
The value of sapTlsDhcp6MsapTrigger specifies whether the receipt of DHCPv6 trigger packets on this VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsDhcp6MsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsShcvRetryTimeout 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.81
The value of the object sapTlsShcvRetryTimeout specifies the timeout in seconds before a connectivity check retransmission.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..60  

sapTlsShcvRetryCount 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.82
The value of the object sapTlsShcvRetryCount specifies the number of connectivity check retransmissions. Setting the value to n specifies that, for any given host, at most (n+1) probes are done each interval, and (n+1) missed replies are considered as a connectivity failure.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 2..29  

sapTlsDataSapInstStatus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.83
The value of sapTlsDataSapInstStatus indicates the status of the SAP which is instantiating other SAPs controlled by this SAP. This object is valid for services with TIMETRA-SERV-MIB::svcMgmtVpls set to 'true'.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxSapInstStatus  

sapTlsDataSapInstLastErr 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.84
The value of sapTlsDataSapInstLastErr indicates last error encountered while instantiating SAPs controlled by this SAP. This object is valid for services with TIMETRA-SERV-MIB::svcMgmtVpls set to 'true'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sapTlsMvrpAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.85
The value of sapTlsMvrpAdminStatus specifies whether MVRP is enabled on this SAP. The default value of sapTlsMvrpAdminStatus is set to 'enabled' for MVRP enabled services.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsMvrpOperStatus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.86
The value of sapTlsMvrpOperStatus indicates operational status of MVRP on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsInTcBitBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.87
The value of the object sapTlsInTcBitBpdus indicates the number of BPDUs received on this SAP with the Topology Change bit set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsOutTcBitBpdus 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.88
The value of the object sapTlsOutTcBitBpdus indicates the number of BPDUs sent out this SAP with the Topology Change bit set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsPppMsapTrigger 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.89
The value of sapTlsPppMsapTrigger specifies whether the receipt of PPP trigger packets on a VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsPppoeMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsPppPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.90
The value of sapTlsPppPolicy specifies the policy (defined in TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable) to use to create Managed SAPs via PPP with PAP/CHAP authentication. The value of sapTlsPppPolicy is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The value of sapTlsPppPolicy is used for PPP sessions where the value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oA', as opposed to 'oE' or 'oEoA'. In general, the default value is empty; for a SAP with a sapSubType value of 'capture', the default value is equal to default.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsTrackSrrpInst 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.91
The value of sapTlsTrackSrrpInst specifies the SRRP instance to track.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

sapTlsPppUserDb 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.92
The value of sapTlsPppUserDb specifies the local user database to use for PPP PAP/CHAP based authentication. If no authentication with the local user database is required, the value of this object must be set to the empty string. The value of sapTlsPppUserDb is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The value of sapTlsPppUserDb is used for PPP sessions where the value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oA', as opposed to 'oE' or 'oEoA'.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsPppoeUserDb 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.93
The value of sapTlsPppoeUserDb specifies the local user database to use for PPPoE PADI PAP/CHAP based authentication. If no authentication with the local user database is required, the value of this object must be set to the empty string. The value of sapTlsPppoeUserDb is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The value of sapTlsPppoeUserDb is used for PPP sessions where the value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oE' or 'oEoA', as opposed to 'oA'.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsDhcpUserDb 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.94
The value of sapTlsDhcpUserDb specifies the local user database to use for DHCP based authentication. If no authentication with the local user database is required, the value of this object must be set to the empty string. The value of sapTlsDhcpUserDb is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned.
Status: current Access: read-write
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsAutoLearnMacProtect 1.3.6.1.4.1.6527.3.1.2.4.3.3.1.95
The value of sapTlsAutoLearnMacProtect specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the associated SAP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapAtmInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.4
A table that contains ATM SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapAtmInfoEntry

sapAtmInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.4.1
Information about a specific ATM SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapAtmInfoEntry  

sapAtmEncapsulation 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.1
This object specifies the data encapsulation used over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxSapAtmEncapsulation  

sapAtmIngressTrafficDescIndex 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.2
This object specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used in for the ingress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
Status: current Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 1..1000  

sapAtmEgressTrafficDescIndex 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.3
This object specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used in for the egress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
Status: current Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 1..1000  

sapAtmOamAlarmCellHandling 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.4
A value of up specifies that the OAM status of a pvc affects the sap operational status and OAM AIS/RDI cell generation upon a sap operational status of down. A value of down specifies that the OAM status of a pvc will not affect the operational status of the associated sap and no OAM AIS/RDI cells are generated.
Status: current Access: read-write
OBJECT-TYPE    
  ServiceAdminStatus  

sapAtmOamTerminate 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5
The sapAtmOamTerminate object specifies whether this SAP will act as an OAM termination point. If enabled, OAM cells will be sunk by the SAP and can affect the SAP's operational status (if sapAtmOamAlarmCellHandling is also enabled). Otherwise the OAM cells will be passed into the APIPE service. This object is only configurable for ATM SAPs that are part of an APIPE service SDU or VCC mode. If the sapPortId belongs to an Multi-Chassis APS port, the default value is up.
Status: current Access: read-write
OBJECT-TYPE    
  ServiceAdminStatus  

sapAtmOamPeriodicLoopback 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6
The sapAtmOamPeriodicLoopback object specifies whether this SAP will run periodic OAM loopbacks or not. If enabled, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is not received and tAtmSysOamRetryDown consecutive retries also result in failure, the endpoint will transition to the eteAisLoc state. Once in the eteAisLoc state, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is received for the periodic loopback and tAtmSysOamRetryUp consecutive retries also each receive a response, the endpoint will transition back to the up state. This object is only configurable on IES or VPRN service endpoints.
Status: current Access: read-write
OBJECT-TYPE    
  ServiceAdminStatus  

sapAtmLLFAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.7
sapAtmLLFAdminStatus specifies whether or not Link- Loss Forwarding is enabled ('up'). When this object is set to 'up' the underlying port will be forced into the operationally 'down' state if the service is operationally 'down', or any of the 'sdpBindPwPeerStatusBits' are set, and will set the underlying port's tmnxPortReasonDownFlags 'linklossFwd' bit. Setting this object to 'down' will clear the 'linklossFwd' reason. sapAtmLLFAdminStatus can only be enabled on saps configured for an APIPE service using an port with the tmnxPortEncapType set to 'atmEncap' and sapEncapValue set for ATM ports.
Status: current Access: read-write
OBJECT-TYPE    
  ServiceAdminStatus  

sapAtmLLFOperStatus 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.8
sapAtmLLFOperStatus indicates whether or not the underlying port is forced operationally 'down' due to the service being operationally 'down' or an sdpBindPwPeerStatusBits bit is set. sapAtmLLFOperStatus is set to 'fault' when the sapAtmLLFAdminStatus is set to 'up,' and either a fault has occurred on the pseudo-wire, or the service is down, otherwise sapAtmLLFOperStatus is set to 'clear.'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fault(1), clear(2)  

sapAtmSubPppIndex 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.10
The value of sapAtmSubPppIndex indicates the local identifier of the subscriber PPP session. It is the index of the corresponding conceptual row in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppTable. The value zero indicates that there is no subscriber PPP session associated with this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapAtmDetectedEncapsulation 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.11
This object indicates the AAL5 data encapsulation detected by PPPoA (PPP over ATM) or PPPoEoA (PPP over Ethernet over ATM). The value is only applicable if sapAtmEncapsulation is set to 'auto' and returns 'unknown' as long as no encapsulation is detected. If sapAtmEncapsulation is set to a value different than 'auto', sapAtmDetectedEncapsulation always returns the same value as sapAtmEncapsulation.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxSapAtmEncapsulation  

sapAtmIngressTrafficDescIndexOvr 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.12
This object indicates the index of the ATM ingress traffic descriptor override. This override value is given by an AAA server such as a RADIUS server. The value zero indicates that no override is given.
Status: current Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 0 | 1..1000  

sapAtmEgressTrafficDescIndexOvr 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.13
This object indicates the index of the ATM egress traffic descriptor override. This override value is given by an AAA server such as a RADIUS server. The value zero indicates that no override is given.
Status: current Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 0 | 1..1000  

sapBaseStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.6
A table that contains basic SAP statistics. In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS series Packet Processing chip, while 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapBaseStatsEntry

sapBaseStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.6.1
Basic statistics about a specific SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapBaseStatsEntry  

sapBaseStatsIngressPchipDroppedPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.1
The number of packets dropped by the ingress Pchip due to: SAP state, ingress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipDroppedOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.2
The number of octets dropped by the ingress Pchip due to: SAP state, ingress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.3
The number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.4
The number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.5
The number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.6
The number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipDroppedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.7
The number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipDroppedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.8
The number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipDroppedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.9
The number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipDroppedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.10
The number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.11
The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.12
The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.13
The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressQchipForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.14
The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipDroppedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.15
The number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipDroppedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.16
The number of in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipDroppedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.17
The number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipDroppedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.18
The number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.19
The number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.20
The number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.21
The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsEgressQchipForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.22
The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsCustId 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.23
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapBaseStatsIngressPchipOfferedUncoloredPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.24
The number of uncolored packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressPchipOfferedUncoloredOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.25
The number of uncolored octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsAuthenticationPktsDiscarded 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.26
The number of DHCP packets discarded as result of authentication.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapBaseStatsAuthenticationPktsSuccess 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.27
The number of DHCP packets successfully authenticated.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapBaseStatsLastClearedTime 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.28
The value of sapBaseStatsLastClearedTime indicates the sysUpTime when the counters in this table were last cleared.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapBaseStatsIngressCPMPackets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.29
The value of sapBaseStatsIngressCPMPackets indicates ingress traffic in terms of packets destined to CPM associated with this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressCPMPacketsHi 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.30
The value of sapBaseStatsIngressCPMPacketsHi indicates upper 32 bits of sapBaseStatsIngressCPMPackets object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapBaseStatsIngressCPMPacketsLo 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.31
The value of sapBaseStatsIngressCPMPacketsHi indicates lower 32 bits of sapBaseStatsIngressCPMPackets object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapBaseStatsIngressCPMOctets 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.32
The value of sapBaseStatsIngressCPMOctets indicates ingress traffic in terms of bytes destined to CPM associated with this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapBaseStatsIngressCPMOctetsHi 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.33
The value of sapBaseStatsIngressCPMOctetsHi indicates upper 32 bits of sapBaseStatsIngressCPMOctets object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapBaseStatsIngressCPMOctetsLo 1.3.6.1.4.1.6527.3.1.2.4.3.6.1.34
The value of sapBaseStatsIngressCPMOctetsHi indicates lower 32 bits of sapBaseStatsIngressCPMOctets object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.7
A table that contains ingress QoS queue SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosQueueStatsEntry

sapIngQosQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.7.1
Ingress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosQueueStatsEntry  

sapIngQosQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.1
The index of the ingress QoS queue of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TSapIngQueueId  

sapIngQosQueueStatsOfferedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.2
The number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsDroppedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.3
The number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsOfferedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.4
The number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsDroppedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.5
The number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsOfferedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.6
The number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsDroppedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.7
The number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsOfferedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.8
The number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsDroppedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.9
The number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.10
The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.11
The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.12
The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.13
The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosCustId 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.14
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIngQosQueueStatsUncoloredPacketsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.15
The number of uncolored packets offered to the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosQueueStatsUncoloredOctetsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.7.1.16
The number of uncolored octets offered to the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.8
A table that contains egress QoS queue SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosQueueStatsEntry

sapEgrQosQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.8.1
Egress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosQueueStatsEntry  

sapEgrQosQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.1
The index of the egress QoS queue of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TSapEgrQueueId  

sapEgrQosQueueStatsForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.2
The number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsDroppedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.3
The number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.4
The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsDroppedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.5
The number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.6
The number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsDroppedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.7
The number of in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.8
The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosQueueStatsDroppedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.9
The number of out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosCustId 1.3.6.1.4.1.6527.3.1.2.4.3.8.1.10
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIngQosSchedStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.9
A table that contains ingress QoS queue SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosSchedStatsEntry

sapIngQosSchedStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.9.1
Ingress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosSchedStatsEntry  

sapIngQosSchedName 1.3.6.1.4.1.6527.3.1.2.4.3.9.1.1
The index of the ingress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapIngQosSchedStatsForwardedPackets 1.3.6.1.4.1.6527.3.1.2.4.3.9.1.2
The number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosSchedStatsForwardedOctets 1.3.6.1.4.1.6527.3.1.2.4.3.9.1.3
The number of forwarded octets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.9.1.4
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrQosSchedStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.10
A table that contains ingress QoS queue SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosSchedStatsEntry

sapEgrQosSchedStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.10.1
Egress statistics about a specific SAP's QoS queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosSchedStatsEntry  

sapEgrQosSchedName 1.3.6.1.4.1.6527.3.1.2.4.3.10.1.1
The index of the egress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapEgrQosSchedStatsForwardedPackets 1.3.6.1.4.1.6527.3.1.2.4.3.10.1.2
The number of forwarded packets by the egress Qchip, as determined by the SAP egress scheduler policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosSchedStatsForwardedOctets 1.3.6.1.4.1.6527.3.1.2.4.3.10.1.3
The number of forwarded octets by the egress Qchip, as determined by the SAP egress scheduler policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.10.1.4
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapTlsManagedVlanListTable 1.3.6.1.4.1.6527.3.1.2.4.3.11
This table is used only for SAPs that are part of a management VPLS. It indicates for each SAP the ranges of associated VLANs that will be affected when the SAP changes state.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsManagedVlanListEntry

sapTlsManagedVlanListEntry 1.3.6.1.4.1.6527.3.1.2.4.3.11.1
Each row specifies a range of VLANS associated with a SAP of a MVPLS. Ranges may contains overlapping sections only for Mvpls SAPs that belong to the same service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsManagedVlanListEntry  

sapTlsMvplsMinVlanTag 1.3.6.1.4.1.6527.3.1.2.4.3.11.1.1
The value of sapTlsMvplsMinVlanTag specifies the left bound (i.e. min. value) of a range of VLANs that are associated with the Mvpls SAP. sapTlsMvplsMinVlanTag must be smaller than (or equal to) sapTlsMvplsMaxVlanTag. Special values are: 0: this value is reserved for the null tag. 4095: this value denotes the default SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4095  

sapTlsMvplsMaxVlanTag 1.3.6.1.4.1.6527.3.1.2.4.3.11.1.2
The value of sapTlsMvplsMaxVlanTag specifies the right bound (i.e. max. value) of a range of VLANs that are associated with the Mvpls SAP. Special values are: 0: this value is reserved for the null tag. 4095: this value denotes the default SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4095  

sapTlsMvplsRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.11.1.3
The value of sapTlsMvplsRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. A row (i.e. a range of VLAN tags) can be destroyed only if there are no SAPs defined in regular VPLSses in this range.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapAntiSpoofTable 1.3.6.1.4.1.6527.3.1.2.4.3.12
The sapAntiSpoofTable contains information about anti-spoofing filters on a SAP.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapAntiSpoofEntry

sapAntiSpoofEntry 1.3.6.1.4.1.6527.3.1.2.4.3.12.1
An entry in the sapAntiSpoofTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SapAntiSpoofEntry  

sapAntiSpoofIpAddress 1.3.6.1.4.1.6527.3.1.2.4.3.12.1.1
The value of sapAntiSpoofIpAddress indicates the IP address for which this table entry contains information.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

sapAntiSpoofMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.12.1.2
The value of sapAntiSpoofMacAddress indicates the MAC address for which this table entry contains information.
Status: obsolete Access: read-only
OBJECT-TYPE    
  MacAddress  

sapStaticHostTable 1.3.6.1.4.1.6527.3.1.2.4.3.13
The sapStaticHostTable is used to configure static hosts on a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapStaticHostEntry

sapStaticHostEntry 1.3.6.1.4.1.6527.3.1.2.4.3.13.1
Each row entry represents information on a statically configured host. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapStaticHostEntry  

sapStaticHostRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.1
The value of the object sapStaticHostRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapStaticHostIpAddress 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.2
The value of the object sapStaticHostIpAddress specifies the IP address associated with this static host. The value 0.0.0.0 indicates that no host IP address is specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sapStaticHostMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.3
The value of the object sapStaticHostMacAddress specifies the MAC address associated with this static host. The value 0:0:0:0:0:0 indicates that no host MAC address is specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

sapStaticHostSubscrIdent 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.4
The value of the object sapStaticHostSubscrIdent specifies the subscriber identification for this static host.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapStaticHostSubProfile 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.5
The value of the object sapStaticHostSubProfile specifies the subscriber profile for this static host. The specified subscriber profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapStaticHostSlaProfile 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.6
The value of the object sapStaticHostSlaProfile specifies the SLA profile for this static host. The specified SLA profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapStaticHostShcvOperState 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.7
The value of the object sapStaticHostShcvOperState gives the state of the subscriber host connectivity check for this static host.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), undefined(2), down(3), up(4)  

sapStaticHostShcvChecks 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.8
The value of the object sapStaticHostShcvChecks specifies the number of connectivity checks for this static host.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapStaticHostShcvReplies 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.9
The value of the object sapStaticHostShcvReplies specifies the number of host replies for this static host.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapStaticHostShcvReplyTime 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.10
The value of the object sapStaticHostShcvReplyTime gives the timestamp of the last successful connectivity check for this static host.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapStaticHostDynMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.11
The value of the object sapStaticHostDynMacAddress gives the MAC address learned via ARP in case this is an IP-only static host (sapStaticHostMacAddress is set to 0:0:0:0:0:0). The value 0:0:0:0:0:0 indicates that no MAC address is learned yet.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sapStaticHostRetailerSvcId 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.12
The value of the object sapStaticHostRetailerSvcId indicates the service ID of the retailer VPRN service to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxServId  

sapStaticHostRetailerIf 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.13
The value of the object sapStaticHostRetailerIf indicates the interface index of the retailer VPRN interface to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

sapStaticHostFwdingState 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.14
The value of sapStaticHostFwdingState indicates the forwarding state of this static host. When the value is 'outOfService', host traffic is not forwarded. When it is 'inService', host traffic is forwarded.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

sapStaticHostAncpString 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.15
The value of sapStaticHostAncpString specifies the ancp-string associated to this SAP host.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAncpStringOrZero  

sapStaticHostSubIdIsSapId 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.16
The value of the object sapStaticHostSubIdIsSapId specifies whether the SAP-id is taken as subscriber identification for this static host.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapStaticHostAppProfile 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.17
The value of sapStaticHostAppProfile specifies the application profile for this static host. The specified application profile needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapStaticHostIntermediateDestId 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.18
The value of sapStaticHostIntermediateDestId specifies to which intermediate destination (for example a DSLAM) this host belongs.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapStaticHostAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.19
The value of sapStaticHostAdminStatus specifies the administrative status of this host.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAdminStatus  

sapStaticHostFilterProfile 1.3.6.1.4.1.6527.3.1.2.4.3.13.1.20
The value of the object sapStaticHostFilterProfile specifies the filter profile for this static host. The specified filter profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsDhcpInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.14
sapTlsDhcpInfoTable contains DHCP information related to a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsDhcpInfoEntry

sapTlsDhcpInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.14.1
DHCP specific information for a TLS SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsDhcpInfoEntry  

sapTlsDhcpAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.1
The value of the object sapTlsDhcpAdminState specifies the overall enable/disable state of all DHCP related actions on this Sap. The value 'disabled' allows the user to configure individual DHCP commands but administratively disable them.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsDhcpDescription 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.2
The value of the object sapTlsDhcpDescription specifies a user provided description for DHCP on this Sap. It consists of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-write
OBJECT-TYPE    
  ServObjDesc  

sapTlsDhcpSnoop 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.3
The value of the object sapTlsDhcpSnoop specifies the enable/disable state for DHCP snooping on this Sap. Note that in order for snooping to be enabled the object sapTlsDhcpAdminState must also have the value enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsDhcpLeasePopulate 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.4
The value of the object sapTlsDhcpLeasePopulate specifies the maximum number of DHCP lease states allowed on this SAP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..32767  

sapTlsDhcpOperLeasePopulate 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.5
The value of the object sapTlsDhcpOperLeasePopulate indicates the number of DHCP lease states currently allocated on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..32767  

sapTlsDhcpInfoAction 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.6
The value of the object sapTlsDhcpInfoAction specifies the DHCP option reforwarding policy: 'replace' - replace existing information with configured information 'drop' - discard messages with existing relay information if the option-82 information is also present. 'keep' - retain the existing relay information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)  

sapTlsDhcpCircuitId 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.7
The value of the object sapTlsDhcpCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it: - 'none' the circuit-id suboption will not be part of the information option (Option 82). - 'asciiTuple' the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name is used. - 'vlanAsciiTuple' the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), asciiTuple(1), vlanAsciiTuple(2)  

sapTlsDhcpRemoteId 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.8
The value of the object sapTlsDhcpRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption will not be part of the information option (Option 82). If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of this object is set to 'remote-id', sapTlsDhcpRemoteIdString will represent the remote-id. By default, the remote-id value is none.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), mac(2), remote-id(3)  

sapTlsDhcpRemoteIdString 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.9
The value of the object sapTlsDhcpRemoteIdString specifies the remote-id. This object exists only if sapTlsDhcpRemoteId has a value of 'remote-id'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapTlsDhcpProxyAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.10
The value of sapTlsDhcpProxyAdminState specifies the desired administrative state of the proxy server on this interface. Note that in order for the proxy server to be enabled, the value of sapTlsDhcpAdminState must also be 'enabled'.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTlsDhcpProxyServerAddr 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.11
The value of sapTlsDhcpProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server in the context of this VPLS SAP. This address is mandatory for the proxy server capability and it should be in the context of the subnet represented by this VPLS.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sapTlsDhcpProxyLeaseTime 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.12
The value of sapTlsDhcpProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 300..315446399  

sapTlsDhcpProxyLTRadiusOverride 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.13
The value of sapTlsDhcpProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of sapTlsDhcpProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When sapTlsDhcpProxyLTRadiusOverride is set to 'true', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTlsDhcpVendorIncludeOptions 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.14
The value of sapTlsDhcpVendorIncludeOptions specifies what is encoded in the Alcatel-Lucent vendor specific sub-option of option 82. The value of this object is only used when sapTlsDhcpInfoAction is 'replace'.
Status: current Access: read-write
OBJECT-TYPE    
  BITS systemId(0), clientMac(1), serviceId(2), sapId(3)  

sapTlsDhcpVendorOptionString 1.3.6.1.4.1.6527.3.1.2.4.3.14.1.15
The value of sapTlsDhcpVendorOptionString specifies the string that goes into the Alcatel-Lucent vendor specific sub-option of option 82. This string is only used when sapTlsDhcpInfoAction is set to 'replace'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapTlsDhcpStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.15
sapTlsDhcpStatsTable contains DHCP statistics related to a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsDhcpStatsEntry

sapTlsDhcpStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.15.1
DHCP statistics for a TLS SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsDhcpStatsEntry  

sapTlsDhcpStatsClntSnoopdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.1
The value of the object sapTlsDhcpStatsClntSnoopdPckts indicates the number of DHCP client packets that have been snooped on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsSrvrSnoopdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.2
The value of the object sapTlsDhcpStatsSrvrSnoopdPckts indicates the number of DHCP server packets that have been snooped on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsClntForwdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.3
The value of the object sapTlsDhcpStatsClntForwdPckts indicates the number of DHCP client packets that have been forwarded on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsSrvrForwdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.4
The value of the object sapTlsDhcpStatsSrvrForwdPckts indicates the number of DHCP server packets that have been forwarded on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsClntDropdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.5
The value of the object sapTlsDhcpStatsClntDropdPckts indicates the number of DHCP client packets that have been dropped on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsSrvrDropdPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.6
The value of the object sapTlsDhcpStatsSrvrDropdPckts indicates the number of DHCP server packets that have been dropped on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsClntProxRadPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.7
The value of the object sapTlsDhcpStatsClntProxRadPckts indicates the number of DHCP client packets that have been proxied on this SAP based on data received from a RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsClntProxLSPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.8
The value of the object sapTlsDhcpStatsClntProxLSPckts indicates the number of DHCP client packets that have been proxied on this SAP based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsGenReleasePckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.9
The value of the object sapTlsDhcpStatsGenReleasePckts indicates the number of DHCP RELEASE messages spoofed on this SAP to the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpStatsGenForceRenPckts 1.3.6.1.4.1.6527.3.1.2.4.3.15.1.10
The value of the object sapTlsDhcpStatsGenForceRenPckts indicates the number of DHCP FORCERENEW messages spoofed on this SAP to the DHCP clients.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsDhcpLeaseStateTable 1.3.6.1.4.1.6527.3.1.2.4.3.16
sapTlsDhcpLeaseStateTable contains DHCP lease state info for a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system. The content of this table is moved to the svcDhcpLeaseStateTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsDhcpLeaseStateEntry

sapTlsDhcpLeaseStateEntry 1.3.6.1.4.1.6527.3.1.2.4.3.16.1
DHCP Lease State information on a TLS SAP.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SapTlsDhcpLeaseStateEntry  

sapTlsDhcpLseStateCiAddr 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.1
The value of the object sapTlsDhcpLseStateCiAddr indicates the IP address of the DHCP lease state.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sapTlsDhcpLseStateChAddr 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.2
The value of the object sapTlsDhcpLseStateChAddr indicates the MAC address of the DHCP lease state.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  MacAddress  

sapTlsDhcpLseStateRemainLseTime 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.3
The value of the object sapTlsDhcpLseStateRemainLseTime indicates the remaining lease time of the Ip address of the DHCP lease state. This object was made obsolete in the 4.0 release.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapTlsDhcpLseStateOption82 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.4
The value of the object sapTlsDhcpLseStateOption82 indicates the content of the Option82 for this DHCP lease state. This object was made obsolete in the 4.0 release.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

sapTlsDhcpLseStatePersistKey 1.3.6.1.4.1.6527.3.1.2.4.3.16.1.5
The value of the object sapTlsDhcpLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file. This object was made obsolete in the 4.0 release.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapPortIdIngQosSchedStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.17
The sapPortIdIngQosSchedStatsTable contains ingress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapPortIdIngQosSchedStatsEntry

sapPortIdIngQosSchedStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.17.1
Each entry represents the ingress statistics about a specific SAP's QoS queue. Entries are created when a scheduler policy is applied to a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapPortIdIngQosSchedStatsEntry  

sapPortIdIngQosSchedName 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.1
The value of sapPortIdIngQosSchedName is used as an index of the ingress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapPortIdIngPortId 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.2
The value of sapPortIdIngPortId is used as an index of the ingress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortID  

sapPortIdIngQosSchedFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.3
The value of sapPortIdIngQosSchedFwdPkts indicates the number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdIngQosSchedFwdOctets 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.4
The value of sapPortIdIngQosSchedFwdOctets indicates the number of forwarded octets,as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdIngQosSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.17.1.5
The value of sapPortIdIngQosSchedCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapPortIdEgrQosSchedStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.18
The sapPortIdEgrQosSchedStatsTable contains egress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapPortIdEgrQosSchedStatsEntry

sapPortIdEgrQosSchedStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.18.1
Each entry represents the egress statistics about a specific SAP's QoS queue. Entries are created when a scheduler policy is applied to a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapPortIdEgrQosSchedStatsEntry  

sapPortIdEgrQosSchedName 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.1
The value of sapPortIdEgrQosSchedName is used as an index of the egress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapPortIdEgrPortId 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.2
The value of sapPortIdEgrPortId is used as an index of the egress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortID  

sapPortIdEgrQosSchedFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.3
The value of sapPortIdEgrQosSchedFwdPkts indicates the number of forwarded packets, as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrQosSchedFwdOctets 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.4
The value of sapPortIdEgrQosSchedFwdOctets indicates the number of forwarded octets,as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrQosSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.18.1.5
The value of sapPortIdEgrQosSchedCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIngQosQueueInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.19
This table is used to override the base parameters of a queue, as defined in the associated SAP ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosQueueInfoEntry

sapIngQosQueueInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.19.1
Override values for the specified SAP ingress QoS queue. These values override the corresponding ones specified in the associated SAP ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosQueueInfoEntry  

sapIngQosQId 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.1
The value of sapIngQosQId indicates the ID of the queue whose parameters are to be overridden.
Status: current Access: not-accessible
OBJECT-TYPE    
  TIngressQueueId  

sapIngQosQRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.2
The value of sapIngQosQRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapIngQosQLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.3
The value of sapIngQosQLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngQosQOverrideFlags 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.4
The value of sapIngQosQOverrideFlags specifies the set of attributes whose values have been overridden via management on this queue. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy.
Status: current Access: read-create
OBJECT-TYPE    
  TQosQueueAttribute  

sapIngQosQCBS 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.5
The value of sapIngQosQCBS specifies the amount of reserved buffer space (in kilo bytes) for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

sapIngQosQMBS 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.6
The value of sapIngQosQMBS specifies the maximum amount of buffer space (in kilo bytes) allowed for this queue.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TBurstSize  

sapIngQosQHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.7
The value of sapIngQosQHiPrioOnly specifies the percentage of buffer space for this queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

sapIngQosQCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.8
The value of sapIngQosQCIRAdaptation specifies the criteria to use to compute the operational CIR value for this queue, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapIngQosQPIRAdaptation 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.9
The value of sapIngQosQPIRAdaptation specifies the criteria to use to compute the operational PIR value for this queue, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapIngQosQAdminPIR 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.10
The value of sapIngQosQAdminPIR specifies the desired PIR value for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

sapIngQosQAdminCIR 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.11
The value of sapIngQosQAdminCIR specifies the desired CIR value for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

sapIngQosQMBSBytes 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.12
The value of sapIngQosQMBSBytes specifies the maximum amount of buffer space (in bytes) allowed for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSizeBytes  

sapIngQosQWeight 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.13
The value of sapIngQosQWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

sapIngQosQCIRWeight 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.14
The value of sapIngQosQCIRWeight specifies the weight that should be assigned to this queue by the parent scheduler among all the entities feeding into the parent, when the traffic is conforming to the committed rate. A value of '0' specifies that the queue will not receive bandwidth for the 'within-cir' pass on its parent scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

sapIngQosQAdminPIRPercent 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.15
The value of sapIngQosQAdminPIRPercent specifies the desired PIR value for this queue as a percentage.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

sapIngQosQAdminCIRPercent 1.3.6.1.4.1.6527.3.1.2.4.3.19.1.16
The value of sapIngQosQAdminCIRPercent specifies the desired CIR value for this queue as a percentage.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

sapEgrQosQueueInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.20
This table is used to override the base parameters of a queue, as defined in the associated SAP egress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosQueueInfoEntry

sapEgrQosQueueInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.20.1
Override values for the specified SAP egress QoS queue. These values override the corresponding ones specified in the associated SAP egress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosQueueInfoEntry  

sapEgrQosQId 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.1
The value of sapEgrQosQId indicates the ID of the queue whose parameters are to be overridden.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgressQueueId  

sapEgrQosQRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.2
The value of sapEgrQosQRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapEgrQosQLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.3
The value of sapEgrQosQLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrQosQOverrideFlags 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.4
The value of sapEgrQosQOverrideFlags specifies the set of attributes whose values have been overridden via management on this queue. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy.
Status: current Access: read-create
OBJECT-TYPE    
  TQosQueueAttribute  

sapEgrQosQCBS 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.5
The value of sapEgrQosQCBS specifies the amount of reserved buffer space (in kilo bytes) for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

sapEgrQosQMBS 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.6
The value of sapEgrQosQMBS specifies the maximum amount of buffer space (in kilo bytes) allowed for this queue.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TBurstSize  

sapEgrQosQHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.7
The value of sapEgrQosQHiPrioOnly specifies the percentage of buffer space for this queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

sapEgrQosQCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.8
The value of sapEgrQosQCIRAdaptation specifies the criteria to use to compute the operational CIR value for this queue, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapEgrQosQPIRAdaptation 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.9
The value of sapEgrQosQPIRAdaptation specifies the criteria to use to compute the operational PIR value for this queue, while maintaining a minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

sapEgrQosQAdminPIR 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.10
The value of sapEgrQosQAdminPIR specifies the desired PIR value for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

sapEgrQosQAdminCIR 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.11
The value of sapEgrQosQAdminCIR specifies the desired CIR value for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

sapEgrQosQAvgOverhead 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.12
The value of sapEgrQosQAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

sapEgrQosQMBSBytes 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.13
The value of sapEgrQosQMBSBytes specifies the maximum amount of buffer space (in bytes) allowed for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSizeBytes  

sapEgrQosQWeight 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.14
The value of sapEgrQosQWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

sapEgrQosQCIRWeight 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.15
The value of sapEgrQosQCIRWeight specifies the weight that should be assigned to this queue by the parent scheduler among all the entities feeding into the parent, when the traffic is conforming to the committed rate. A value of '0' specifies that the queue will not receive bandwidth for the 'within-cir' pass on its parent scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

sapEgrQosQAdminPIRPercent 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.16
The value of sapEgrQosQAdminPIRPercent specifies the desired PIR value for this queue as a percentage.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..10000  

sapEgrQosQAdminCIRPercent 1.3.6.1.4.1.6527.3.1.2.4.3.20.1.17
The value of sapEgrQosQAdminCIRPercent specifies the desired CIR value for this queue as a percentage.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

sapIngQosSchedInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.21
This table is used to override the base parameters of a virtual scheduler, as defined in the associated SAP ingress scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosSchedInfoEntry

sapIngQosSchedInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.21.1
Override values for the specified SAP ingress virtual scheduler. These values override the corresponding ones specified in the associated SAP ingress scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosSchedInfoEntry  

sapIngQosSName 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.1
The value of sapIngQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapIngQosSRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.2
The value of sapIngQosSRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapIngQosSLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.3
The value of sapIngQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngQosSOverrideFlags 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.4
The value of sapIngQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TVirtSchedAttribute  

sapIngQosSPIR 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.5
The value of sapIngQosSPIR specifies the desired PIR value for this virtual scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  THPolVirtualSchePIRRate  

sapIngQosSCIR 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.6
The value of sapIngQosSCIR specifies the desired CIR value for this virtual scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  THPolVirtualScheCIRRate  

sapIngQosSSummedCIR 1.3.6.1.4.1.6527.3.1.2.4.3.21.1.7
The value of sapIngQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (sapIngQosSCIR) loses its meaning.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgrQosSchedInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.22
This table is used to override the base parameters of a virtual scheduler, as defined in the associated SAP egress scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosSchedInfoEntry

sapEgrQosSchedInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.22.1
Override values for the specified SAP egress virtual scheduler. These values override the corresponding ones specified in the associated SAP egress scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosSchedInfoEntry  

sapEgrQosSName 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.1
The value of sapEgrQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapEgrQosSRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.2
The value of sapEgrQosSRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapEgrQosSLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.3
The value of sapEgrQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrQosSOverrideFlags 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.4
The value of sapEgrQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's egress scheduler policy.
Status: current Access: read-create
OBJECT-TYPE    
  TVirtSchedAttribute  

sapEgrQosSPIR 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.5
The value of sapEgrQosSPIR specifies the desired PIR value for this virtual scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  THPolVirtualSchePIRRate  

sapEgrQosSCIR 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.6
The value of sapEgrQosSCIR specifies the desired CIR value for this virtual scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  THPolVirtualScheCIRRate  

sapEgrQosSSummedCIR 1.3.6.1.4.1.6527.3.1.2.4.3.22.1.7
The value of sapEgrQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (sapEgrQosSCIR) loses its meaning.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapSubMgmtInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.23
A table that contains SAP subscriber management information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapSubMgmtInfoEntry

sapSubMgmtInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.23.1
Subscriber management specific information about a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapSubMgmtInfoEntry  

sapSubMgmtAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.1
The value of sapSubMgmtAdminStatus specifies whether enhanced subscriber management is enabled on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapSubMgmtDefSubProfile 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.2
The value of sapSubMgmtDefSubProfile specifies the default subscriber profile applicable on this SAP. The corresponding profile is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable. A value of 'default' is not allowed for this object.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtDefSlaProfile 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.3
The value of sapSubMgmtDefSlaProfile specifies the default SLA profile applicable on this SAP. The corresponding profile is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtSubIdentPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.4
The value of sapSubMgmtSubIdentPolicy specifies the subscriber identification policy applicable on this SAP. The corresponding policy is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubIdentPolicyTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtSubscriberLimit 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.5
The value of sapSubMgmtSubscriberLimit specifies the maximum number of subscribers allowed for this SAP. If the value is 0, there is no limit. Only if the value is 1, the 'single-sub-parameters' defined with objects sapSubMgmtProfiledTrafficOnly, sapSubMgmtNonSubTrafficSubProf and sapSubMgmtNonSubTrafficSlaProf are meaningful.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxSapSubscriberLimit  

sapSubMgmtProfiledTrafficOnly 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.6
The value of sapSubMgmtProfiledTrafficOnly specifies whether only profiled traffic is applicable for this SAP. If set to 'true', all SAP queues will be deleted. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapSubMgmtNonSubTrafficSubIdent 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.7
The value of sapSubMgmtNonSubTrafficSubIdent specifies the subscriber identification applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapSubMgmtNonSubTrafficSubProf 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.8
The value of sapSubMgmtNonSubTrafficSubProf specifies the subscriber profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtNonSubTrafficSlaProf 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.9
The value of sapSubMgmtNonSubTrafficSlaProf specifies the SLA profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtMacDaHashing 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.10
The value of sapSubMgmtMacDaHashing specifies whether subscriber traffic egressing a LAG SAP has its egress LAG link selected by a function of the MAC destination address instead of subscriber id. The value of this object is only meaningful if sapSubMgmtAdminStatus is set to 'enabled' and can only be configured for TLS services.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapSubMgmtDefSubIdent 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.11
The value of sapSubMgmtDefSubIdent specifies what is used as the default subscriber identification applicable on this SAP. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this objects is set to 'useSapId', the SAP-id is used as the default subscriber identification string. In this case, sapSubMgmtDefSubIdentString must contain the empty string. If the value of this objects is set to 'useAutoId', the auto-generated subscriber identification string, as defined in tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber identification string. In this case, sapSubMgmtDefSubIdentString must contain the empty string. If the value of this object is set to 'useString', the value of sapSubMgmtDefSubIdentString is used as the default subscriber identification string. In this case, an empty sapSubMgmtDefSubIdentString means that there is no default subscriber identification configured.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxDefSubIdSource  

sapSubMgmtDefSubIdentString 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.12
The value of sapSubMgmtDefSubIdentString specifies the default subscriber identification string applicable on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapSubMgmtDefAppProfile 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.13
The value of sapSubMgmtDefAppProfile specifies the default application profile applicable on this SAP. The corresponding profile is defined in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtNonSubTrafficAppProf 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.14
The value of sapSubMgmtNonSubTrafficAppProf specifies the application profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapSubMgmtDefInterDestId 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.15
The value of sapSubMgmtDefInterDestId specifies what is used as the default intermediate destination identifier applicable on this SAP. This value is used in case no other source (like Radius) provides an intermediate destination identifier. If the value of this object is set to 'useString', the value of sapSubMgmtDefInterDestIdString is used as the default intermediate destination identifier. In this case, an empty sapSubMgmtDefInterDestIdString means that there is no default intermediate destination identifier configured. If the value of this object is set to 'useTopQTag', the top q-tag of this SAP is used as the default intermediate destination identifier. In this case, sapSubMgmtDefInterDestIdString must contain the empty string. If the value of this object is set to 'useVpi', the ATM VPI of this SAP is used as the default intermediate destination identifier. In this case, sapSubMgmtDefInterDestIdString must contain the empty string.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxDefInterDestIdSource  

sapSubMgmtDefInterDestIdString 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.16
The value of sapSubMgmtDefInterDestIdString specifies the default intermediate destination identifier applicable on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

sapSubMgmtDefFilterProfile 1.3.6.1.4.1.6527.3.1.2.4.3.23.1.17
The value of the object sapSubMgmtDefFilterProfile specifies the default filter profile for this SAP. The specified filter profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTlsMstiTable 1.3.6.1.4.1.6527.3.1.2.4.3.24
This table contains Multiple Spanning Tree Instance information for the SAP. Each management VPLS running MSTP can have upto 15 MSTI. An entry in this table is automatically created when a tlsMstiEntry is created.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsMstiEntry

sapTlsMstiEntry 1.3.6.1.4.1.6527.3.1.2.4.3.24.1
Information about a specific MSTI for a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsMstiEntry  

sapTlsMstiPriority 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.1
The value of the object sapTlsMstiPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP and MSTI. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

sapTlsMstiPathCost 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.2
The value of the object sapTlsMstiPathCost specifies the contribution of this port to the MSTI path cost of paths towards the spanning tree regional root which include this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200000000  

sapTlsMstiLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.3
The value of the object sapTlsMstiLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this SAP MSTI information.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsMstiPortRole 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.4
sapTlsMstiPortRole indicates the current role of the sap in the MSTI as defined by the Spanning Tree Protocol.
Status: current Access: read-only
OBJECT-TYPE    
  StpPortRole  

sapTlsMstiPortState 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.5
The value of the object sapTlsMstiPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state.
Status: current Access: read-only
OBJECT-TYPE    
  TStpPortState  

sapTlsMstiDesignatedBridge 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.6
The value of the object sapTlsMstiDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment for this MSTI.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

sapTlsMstiDesignatedPort 1.3.6.1.4.1.6527.3.1.2.4.3.24.1.7
The value of the object sapTlsMstiDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment for this MSTI.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

sapIpipeInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.25
A table that contains IPIPE specific SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIpipeInfoEntry

sapIpipeInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.25.1
IPIPE specific information about a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIpipeInfoEntry  

sapIpipeCeInetAddressType 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.1
The value of the object sapIpipeCeInetAddressType specifies the addresstype of the local end host IP of an IPIPE. This object is only configurable if the value of 'svcIpipeCeAddressDiscovery' is 'disabled.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

sapIpipeCeInetAddress 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.2
The type of this address is determined by the value of the sapIpipeCeInetAddressType object. This object specifies the IPv4 address of the local end host of an IPIPE. This object is only configurable if the value of 'svcIpipeCeAddressDiscovery' is 'disabled.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress Size(0|4)  

sapIpipeMacRefreshInterval 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.3
The value of sapIpipeMacRefreshInterval specifies the interval between successive attempts to refresh the MAC address of the CE device associated with an Ethernet ipipe SAP. If no other event (such as reception of an ARP request from the CE) occurs that would refresh the MAC address before the end of the interval, an ARP request will be originated from the IPIPE SAP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

sapIpipeMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.4
The value of the object sapIpipeMacAddress specifies the MAC address of an IPIPE Ethernet SAP.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sapIpipeArpedMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.5
The value of the object sapIpipeArpedMacAddress indicates the MAC address of the local end host.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sapIpipeArpedMacAddressTimeout 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.6
The value of the object sapIpipeArpedMacAddressTimeout indicates the number of seconds to wait for the sapIpipeArpedMacAddress to be re-refreshed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

sapIpipeDiscoveredCeInetAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.7
The value of the object sapIpipeDiscoveredCeInetAddrType indicates the addresstype of the local end discovered host IP of an IPIPE SAP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

sapIpipeDiscoveredCeInetAddr 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.8
The type of this address is determined by the value of the sapIpipeDiscoveredCeInetAddrType object. This object indicates the IPv4 address of the discovered local end host of an IPIPE SAP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4)  

sapIpipeUseBroadcastMac 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.9
The value of sapIpipeUseBroadcastMac specifies whether to use a broadcast MAC address to forward traffic from the Ethernet Ipipe SAP when sapIpipeArpedMacAddress is not a valid MAC address (no ARPed MAC address). If svcIpipeCeAddressDiscovery is set to 'disabled (2)', this value cannot be changed from the default value. For non-Ethernet SAPs this value cannot be changed from the default value.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapIpipeUsingBroadcastMac 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.10
The value of sapIpipeUsingBroadcastMac indicates whether a broadcast MAC address is currently being used to forward traffic from the Ethernet Ipipe SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapIpipeIpv6LinkLocalCeInetAddr 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.11
This object indicates the discovered link local IPv6 address of the local end host of an IPIPE SAP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|16)  

sapIpipeIpv6GlobalCeInetAddr 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.12
This object indicates the discovered global IPv6 address of the local end host of an IPIPE SAP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|16)  

sapIpipeIpv6DiscoveredMacAddress 1.3.6.1.4.1.6527.3.1.2.4.3.25.1.13
The value of the object sapIpipeIpv6DiscoveredMacAddress indicates the MAC address of the IPv6 local end host.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sapTodMonitorTable 1.3.6.1.4.1.6527.3.1.2.4.3.26
This table contains information on configurable objects on SAP level, that can be modified by a scheduled policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTodMonitorEntry

sapTodMonitorEntry 1.3.6.1.4.1.6527.3.1.2.4.3.26.1
Information about ToD policy modifiable config data for a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTodMonitorEntry  

sapCurrentIngressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.1
The value of the object sapCurrentIngressIpFilterId indicates the index in the tIPFilterTable corresponding to the ingress filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressIpFilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentIngressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.2
The value of the object sapCurrentIngressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressIpv6FilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentIngressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.3
The value of the object sapCurrentIngressMacFilterId indicates the index in the tMacFilterTable corresponding to the ingress Mac filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressMacFilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentIngressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.4
The value of the object sapCurrentIngressQosPolicyId indicates the index in the tSapIngressTable corresponding to the ingress Qos Policy applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressQosPolicyId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TSapIngressPolicyID  

sapCurrentIngressQosSchedPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.5
The value of the object sapCurrentIngressQosSchedPlcy indicates the ingress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from sapIngressQosSchedulerPolicy in case it is overruled by a ToD Suite policy defined on this SAP, or on the multi-service this SAP belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  ServObjName  

sapCurrentEgressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.6
The value of the object sapCurrentEgressIpFilterId indicates the index in the tIPFilterTable corresponding to the Egress filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressIpFilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentEgressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.7
The value of the object sapCurrentEgressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the Egress Ipv6 filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressIpv6FilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentEgressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.8
The value of the object sapCurrentEgressMacFilterId indicates the index in the tMacFilterTable corresponding to the Egress Mac filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressMacFilterId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapCurrentEgressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.9
The value of the object sapCurrentEgressQosPolicyId indicates the index in the tSapEgressTable corresponding to the Egress Qos Policy applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressQosPolicyId in case it is overruled by a ToD Suite policy.
Status: current Access: read-only
OBJECT-TYPE    
  TSapEgressPolicyID  

sapCurrentEgressQosSchedPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.10
The value of the object sapCurrentEgressQosSchedPlcy indicates the Egress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from sapEgressQosSchedulerPolicy in case it is overruled by a ToD Suite policy defined on this SAP, or on the multi-customer this SAP belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  ServObjName  

sapIntendedIngressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.11
The value of the object sapIntendedIngressIpFilterId indicates the index in the tIPFilterTable corresponding to the ingress IP filter that should be applied on this SAP. If it deviates from sapCurrentIngressIpFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedIngressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.12
The value of the object sapIntendedIngressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter that should be applied on this SAP. If it deviates from sapCurrentIngressIpv6FilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedIngressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.13
The value of the object sapIntendedIngressMacFilterId indicates the index in the tMacFilterTable corresponding to the ingress Mac filter that should be applied on this SAP. If it deviates from sapCurrentIngressMacFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedIngressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.14
The value of the object sapIntendedIngressQosPolicyId indicates the index in the tSapIngressTable corresponding to the ingress Qos policy that should be applied on this SAP. If it deviates from sapCurrentIngressQosPolicyId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TSapIngressPolicyID  

sapIntendedIngressQosSchedPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.15
The value of the object sapIntendedIngressQosSchedPlcy indicates the ingress QoS scheduler that should be applied on this SAP. If it deviates from sapCurrentIngressQosSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  ServObjName  

sapIntendedEgressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.16
The value of the object sapIntendedEgressIpFilterId indicates the index in the tIPFilterTable corresponding to the Egress IP filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressIpFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedEgressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.17
The value of the object sapIntendedEgressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the Egress IPv6 filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressIpv6FilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedEgressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.18
The value of the object sapIntendedEgressMacFilterId indicates the index in the tMacFilterTable corresponding to the Egress mac filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressMacFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TFilterID  

sapIntendedEgressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.19
The value of the object sapIntendedEgressQosPolicyId indicates the index in the tSapEgressTable corresponding to the Egress Qos Policy that should be applied on this SAP. If it deviates from sapCurrentEgressQosPolicyId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  TSapEgressPolicyID  

sapIntendedEgressQosSchedPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.20
The value of the object sapIntendedEgressQosSchedPlcy indicates the index in the tSapEgressTable corresponding to the Egress Qos Scheduler policy that should be applied on this SAP. If it deviates from sapCurrentEgressQosSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.
Status: current Access: read-only
OBJECT-TYPE    
  ServObjName  

sapIngrQosPlcyStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.27
A table that contains Ingress Qos policy related statistics for a SAP. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngrQosPlcyStatsEntry

sapIngrQosPlcyStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.27.1
Statistics about a specific Ingress Qos Policy applied on a specific SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngrQosPlcyStatsEntry  

sapIgQosPlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.1
The value of the object sapIgQosPlcyId indicates the row index in the tSapIngressTable corresponding to this ingress QoS policy, or one if no policy is specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressPolicyID  

sapIgQosPlcyDroppedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.2
The value of the object sapIgQosPlcyDroppedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyDroppedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.3
The value of the object sapIgQosPlcyDroppedHiPrioOctets indicates the number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyDroppedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.4
The value of the object sapIgQosPlcyDroppedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyDroppedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.5
The value of the object sapIgQosPlcyDroppedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.6
The value of the object sapIgQosPlcyForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.7
The value of the object sapIgQosPlcyForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.8
The value of the object sapIgQosPlcyForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.27.1.9
The value of the object sapIgQosPlcyForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPlcyStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.28
A table that contains Egress Qos policy related statistics for a SAP. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosPlcyStatsEntry

sapEgrQosPlcyStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.28.1
Statistics about a specific Egress Qos Policy applied on a specific SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosPlcyStatsEntry  

sapEgQosPlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.1
The value of the object sapEgQosPlcyId indicates the row index in the tSapEgressTable corresponding to this egress QoS policy, or one if no policy is specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressPolicyID  

sapEgQosPlcyDroppedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.2
The value of the object sapEgQosPlcyDroppedInProfPackets indicates the number of in-profile packets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyDroppedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.3
The value of the object sapEgQosPlcyDroppedInProfOctets indicates the number of in-profile octets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyDroppedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.4
The value of the object sapEgQosPlcyDroppedOutProfPackets indicates the number of out-profile packets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyDroppedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.5
The value of the object sapEgQosPlcyDroppedOutProfOctets indicates the number of out-profile octets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.6
The value of the object sapEgQosPlcyForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.7
The value of the object sapEgQosPlcyForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.8
The value of the object sapEgQosPlcyForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.28.1.9
The value of the object sapEgQosPlcyForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPlcyQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.29
A table that contains ingress QoS queue SAP statistics, per Ingress QoS Policy the queue was used by. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosPlcyQueueStatsEntry

sapIngQosPlcyQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.29.1
Ingress statistics about a specific SAP's QoS queue for a given Qos policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosPlcyQueueStatsEntry  

sapIgQosPlcyQueuePlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.1
The value of the object sapIgQosPlcyQueuePlcyId indicates the row index in the tSapIngressTable corresponding to this ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressPolicyID  

sapIgQosPlcyQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.2
The index of the ingress QoS queue of this SAP used by the policy indicated by sapIgQosPlcyQueuePlcyId.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngQueueId  

sapIgQosPlcyQueueStatsOfferedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.3
The value of sapIgQosPlcyQueueStatsOfferedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsDroppedHiPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.4
The value of sapIgQosPlcyQueueStatsDroppedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsOfferedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.5
The value of sapIgQosPlcyQueueStatsOfferedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsDroppedLoPrioPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.6
The value of sapIgQosPlcyQueueStatsDroppedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsOfferedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.7
The value of sapIgQosPlcyQueueStatsOfferedHiPrioOctets indicates the number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsDroppedHiPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.8
The value of sapIgQosPlcyQueueStatsDroppedHiPrioOctets indicates the number ofhigh priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsOfferedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.9
The value of sapIgQosPlcyQueueStatsOfferedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsDroppedLoPrioOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.10
The value of sapIgQosPlcyQueueStatsDroppedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.11
The value of sapIgQosPlcyQueueStatsForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.12
The value of sapIgQosPlcyQueueStatsForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.13
The value of sapIgQosPlcyQueueStatsForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.14
The value of sapIgQosPlcyQueueStatsForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueCustId 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.15
The value of the object sapIgQosPlcyQueueCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIgQosPlcyQueueStatsUncoloredPacketsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.16
The value of sapIgQosPlcyQueueStatsUncoloredPacketsOffered indicates the number of uncolored packets offered to the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyQueueStatsUncoloredOctetsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.29.1.17
The value of sapIgQosPlcyQueueStatsUncoloredOctetsOffered indicates the number of uncolored octets offered to the ingress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPlcyQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.30
A table that contains egress QoS queue SAP statistics per Egress QoS Policy the queue was used by. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosPlcyQueueStatsEntry

sapEgrQosPlcyQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.30.1
Egress statistics about a specific SAP's QoS queue for a given Qos policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosPlcyQueueStatsEntry  

sapEgQosPlcyQueuePlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.1
The row index in the tSapEgressTable corresponding to this egress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressPolicyID  

sapEgQosPlcyQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.2
The value of sapEgQosPlcyQueueId indicates index of the egress QoS queue of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgrQueueId  

sapEgQosPlcyQueueStatsForwardedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.3
The value of sapEgQosPlcyQueueStatsForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsDroppedInProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.4
The value of sapEgQosPlcyQueueStatsDroppedInProfPackets indicates the number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsForwardedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.5
The value of sapEgQosPlcyQueueStatsForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsDroppedOutProfPackets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.6
The value of sapEgQosPlcyQueueStatsDroppedOutProfPackets indicates the number out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsForwardedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.7
The value of sapEgQosPlcyQueueStatsForwardedInProfOctets indicates the number ofin-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsDroppedInProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.8
The value of sapEgQosPlcyQueueStatsDroppedInProfOctets indicates the number in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsForwardedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.9
The value of sapEgQosPlcyQueueStatsForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueStatsDroppedOutProfOctets 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.10
The value of sapEgQosPlcyQueueStatsDroppedOutProfOctets indicates the number out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyQueueCustId 1.3.6.1.4.1.6527.3.1.2.4.3.30.1.11
The value of the object sapEgQosPlcyQueueCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapDhcpInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.31
sapDhcpInfoTable contains DHCP information related to a routed CO subscriber SAP. This table complements sapBaseInfoTable, and contains an entry for each routed CO subscriber SAP. Rows in this table are created and deleted automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapDhcpInfoEntry

sapDhcpInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.31.1
DHCP specific information for a routed CO subscriber SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapDhcpInfoEntry  

sapDhcpOperLeasePopulate 1.3.6.1.4.1.6527.3.1.2.4.3.31.1.1
The value of the object sapDhcpOperLeasePopulate indicates the number of DHCP lease states currently allocated on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapIngSchedPlcyStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.32
A table that contains ingress QoS queue statistics for the SAP's, organized by scheduler policy. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngSchedPlcyStatsEntry

sapIngSchedPlcyStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.32.1
Statistics about a specific SAP's ingress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngSchedPlcyStatsEntry  

sapIngSchedPlcyStatsFwdPkt 1.3.6.1.4.1.6527.3.1.2.4.3.32.1.1
The number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngSchedPlcyStatsFwdOct 1.3.6.1.4.1.6527.3.1.2.4.3.32.1.2
The number of forwarded octets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrSchedPlcyStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.33
A table that contains egress QoS scheduler statistics for the SAP's, organized by scheduler policy. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrSchedPlcyStatsEntry

sapEgrSchedPlcyStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.33.1
Statistics about a specific SAP's egress QoS scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrSchedPlcyStatsEntry  

sapEgrSchedPlcyStatsFwdPkt 1.3.6.1.4.1.6527.3.1.2.4.3.33.1.1
The number of packets forwarded by the egress Qchip, as determined by the SAP egress scheduler policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrSchedPlcyStatsFwdOct 1.3.6.1.4.1.6527.3.1.2.4.3.33.1.2
The number of octets forwarded by the egress Qchip, as determined by the SAP egress scheduler policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngSchedPlcyPortStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.34
The sapIngSchedPlcyPortStatsTable contains ingress QoS scheduler statistics for the SAP's, organized per scheduler policy and per port. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngSchedPlcyPortStatsEntry

sapIngSchedPlcyPortStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.34.1
Statistics about a specific SAP's ingress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngSchedPlcyPortStatsEntry  

sapIngSchedPlcyPortStatsPort 1.3.6.1.4.1.6527.3.1.2.4.3.34.1.1
The value of sapIngSchedPlcyPortStatsPort is used as an index of the ingress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortID  

sapIngSchedPlcyPortStatsFwdPkt 1.3.6.1.4.1.6527.3.1.2.4.3.34.1.2
The value of sapIngSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngSchedPlcyPortStatsFwdOct 1.3.6.1.4.1.6527.3.1.2.4.3.34.1.3
The value of sapIngSchedPlcyPortStatsFwdOct indicates the number of forwarded octets,as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrSchedPlcyPortStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.35
The sapEgrSchedPlcyPortStatsTable contains egress QoS scheduler statistics for the SAP's, organized per scheduler policy and per port. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies. Conceptual rows in this table are automatically created by the system. No row will be created for a SAP if the value of the object sapTodSuite is equal to the empty string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrSchedPlcyPortStatsEntry

sapEgrSchedPlcyPortStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.35.1
Statistics about a specific SAP's egress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrSchedPlcyPortStatsEntry  

sapEgrSchedPlcyPortStatsPort 1.3.6.1.4.1.6527.3.1.2.4.3.35.1.1
The value of sapEgrSchedPlcyPortStatsPort is used as an index of the egress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortID  

sapEgrSchedPlcyPortStatsFwdPkt 1.3.6.1.4.1.6527.3.1.2.4.3.35.1.2
The value of sapEgrSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrSchedPlcyPortStatsFwdOct 1.3.6.1.4.1.6527.3.1.2.4.3.35.1.3
The value of sapEgrSchedPlcyPortStatsFwdOct indicates the number of forwarded octets,as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapCemInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.40
A table that contains CEM SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapCemInfoEntry

sapCemInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.40.1
Information about a specific CEM SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapCemInfoEntry  

sapCemLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.1
The value of the object sapCemLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this CEM SAP information.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapCemEndpointType 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.2
This object indicates the CEM SAP endpoint type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unstructuredE1(1), unstructuredT1(2), unstructuredE3(3), unstructuredT3(4), nxDS0(5), nxDS0WithCas(6)  

sapCemBitrate 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.3
This object indicates the bit-rate in multiples of 64 Kbit/s of the CEM SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..699  

sapCemCasTrunkFraming 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.4
This object indicates the CAS trunk framing mode of the CEM SAP.
Status: current Access: read-only
OBJECT-TYPE    
  TdmOptionsCasTrunkFraming  

sapCemPayloadSize 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.5
This object specifies the payload size (in bytes) of packets transmitted to the Packet Service Network (PSN) by the CEM SAP. This determines the size of the data that will be transmitted over the service. As well, if the size of the data received is not consistent with the payload size then the packet is considered malformed. The default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default payload size | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 256 bytes | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 192 bytes | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 64 bytes | | +-----------+----------------------- | | N = 2..4 | N x 32 bytes | | +-----------+----------------------- | | N = 5..15 | N x 16 bytes | | +-----------+----------------------- | | N >= 16 | N x 8 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | N x 16 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | N x 24 bytes | --------------------------------------------------------- For 'nxDS0WithCas', the sapCemPayloadSize cannot be changed away from the default value. For '1xDS0', sapCemPayloadSize must be a multiple of 2. For 'NxDS0', where N > 1, sapCemPayloadSize must be a multiple of the number of timeslots (sapCemBitrate). For 'unstructuredE1', 'unstructuredT1', 'unstructuredE3' and 'unstructuredT3', sapCemPayloadSize must be a multiple of 32 bytes. Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffers is not allowed. For all endpoint types except for 'nxDS0WithCas', the minimum payload size is given below: --------------------------------------------------------- | Endpoint Type | Timeslots | Minimum payload size | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 256 bytes | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 192 bytes | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1) | N = 1..4 | N x 16 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (T1) | N = 1..4 | N x 24 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 5..15 | N x 16 bytes | | +-----------+----------------------- | | N >= 16 | N x 8 bytes | ---------------------+-----------+----------------------- For all endpoints types except for 'nxDS0WithCas', the maximum payload size is 2048 bytes. Setting this object to 0 sets it back to the default value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 16..2048  

sapCemJitterBuffer 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.6
This object specifies the jitter buffer size in milliseconds (ms). Default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default jitter buf. | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 32 ms | | +-----------+----------------------- | | N = 2..4 | 16 ms | | +-----------+----------------------- | | N = 5..15 | 8 ms | | +-----------+----------------------- | | N >= 16 | 5 ms | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | 8 ms | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | 12 ms | --------------------------------------------------------- Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffers is not allowed. The valid range is 1 to 250 ms. Setting this object to 0 sets it back to the default value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..250  

sapCemUseRtpHeader 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.7
This object specifies whether a RTP header is used when packets are transmitted to the Packet Service Network (PSN) by the CEM SAP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapCemDifferential 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.8
This object specifies whether this CEM SAP is in differential mode.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapCemTimestampFreq 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.9
This object specifies the value of the differential timestamp frequency in multiples of 8 KHz for this CEM SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapCemReportAlarm 1.2.3.4.5.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.10
The value of sapCemReportAlarm determines when and if to generate notifications for the CEM SAP.
Status: current Access: read-write
OBJECT-TYPE    
  CemSapReportAlarm  

sapCemReportAlarmStatus 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.11
The value of sapCemReportAlarmStatus indicates the current alarms on this CEM SAP.
Status: current Access: read-only
OBJECT-TYPE    
  CemSapReportAlarm  

sapCemLocalEcid 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.12
The value of the object sapCemLocalEcid specifies the local ECID. Only valid if CEM SAP belongs to an EPIPE service.
Status: current Access: read-write
OBJECT-TYPE    
  CemSapEcid  

sapCemRemoteMacAddr 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.13
The value of the object sapCemRemoteMacAddr specifies the remote MAC address. Only valid if CEM SAP belongs to an EPIPE service.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

sapCemRemoteEcid 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.14
The value of the object sapCemRemoteEcid specifies the remote ECID. Only valid if CEM SAP belongs to an EPIPE service.
Status: current Access: read-write
OBJECT-TYPE    
  CemSapEcid  

sapCemJitterBufPackets 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.15
This value indicates the jitter buffer length in number of packet buffers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapCemPlayoutBufPacketsThreshold 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.16
This value indicates the playout buffer packets threshold in number of packet buffers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapCemStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.41
A table that contains CEM SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapCemStatsEntry

sapCemStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.41.1
Statistics for a specific CEM SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapCemStatsEntry  

sapCemStatsIngressForwardedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.1
The value of sapCemStatsIngressForwardedPkts indicates the number of packets that were successfully forwarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsIngressDroppedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.2
The value of sapCemStatsIngressDroppedPkts indicates the total number of packets that were dropped due to errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressForwardedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.3
The value of sapCemStatsEgressForwardedPkts indicates the number of packets that were successfully forwarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressDroppedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.4
The value of sapCemStatsEgressDroppedPkts indicates the total number of packets that were dropped due to errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressMissingPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.5
The value of sapCemStatsEgressMissingPkts indicates the number of missing packets (as detected via control word sequence number gaps).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressPktsReOrder 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.6
The value of sapCemStatsEgressPktsReOrder indicates the number of packets detected out of sequence (via control word sequence number), but successfully re-ordered.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressJtrBfrUnderruns 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.7
The value of sapCemStatsEgressJtrBfrUnderruns indicates the number of times a packet needed to be played out and the jitter buffer was empty.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressJtrBfrOverruns 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.8
The value of sapCemStatsEgressJtrBfrOverruns indicates the number of times a packet was dropped because it could not fit in the jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressMisOrderDropped 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.9
The value of sapCemStatsEgressMisOrderDropped indicates the number of packets detected out of order (via control word sequence numbers), and could not be re-ordered, or could not be placed in the jitter buffer because it was out of the current window.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressMalformedPkts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.10
The value of sapCemStatsEgressMalformedPkts indicates the number of packets detected with unexpected size, or bad headers' stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressLBitDropped 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.11
The value of sapCemStatsEgressLBitDropped indicates the number of packets dropped due to the L bit set by the far end.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressMultipleDropped 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.12
The value of sapCemStatsEgressMultipleDropped indicates the number of packets dropped due to multiple sequence numbers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressESs 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.13
The value of sapCemStatsEgressESs indicates the number of Error Seconds (ESs) encountered. Any malformed packet, seq. error, LOPS and similar are considered as error seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressSESs 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.14
The value of sapCemStatsEgressSESs indicates the number of Severely Error Seconds (SESs) encountered. This is when more than 30 percent of the packets within a one second window are missing.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressUASs 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.15
The value of sapCemStatsEgressUASs indicates the number of Unavailable Seconds (UASs) encountered. Any consecutive ten seconds of SESs are counted as one UAS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressFailureCounts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.16
The value of sapCemStatsEgressFailureCounts indicates the number failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressUnderrunCounts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.17
The value of sapCemStatsEgressUnderrunCounts indicates the number of times the jitter buffer went into an underrun state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressOverrunCounts 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.18
The value of sapCemStatsEgressOverrunCounts indicates the number of times the jitter buffer went into an overrun state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCemStatsEgressJtrBfrDepth 1.3.6.1.4.1.6527.3.1.2.4.3.41.1.19
The value of sapCemStatsEgressJtrBfrDepth indicates the current packet depth of the jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapTlsL2ptStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.42
A table that contains SAP Layer 2 Protocol Tunneling Statistics. This table complements sapTlsInfoTable. Rows in this table are created and deleted automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsL2ptStatsEntry

sapTlsL2ptStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.42.1
Layer 2 Protocol Tunneling Statistics for a specific SAP. The statistics are provided for each combination of Destination Address and LLC SNAP type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsL2ptStatsEntry  

sapTlsL2ptStatsLastClearedTime 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.1
The value of sapTlsL2ptStatsLastClearedTime indicates the last time that these stats were cleared. The value zero indicates that they have not been cleared yet.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.2
The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the number of L2PT encapsulated STP config bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.3
The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the number of L2PT encapsulated STP config bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpRstBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.4
The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the number of L2PT encapsulated STP rst bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpRstBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.5
The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the number of L2PT encapsulated STP rst bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.6
The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the number of L2PT encapsulated STP tcn bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.7
The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the number of L2PT encapsulated STP tcn bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.8
The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the number of L2PT encapsulated PVST config bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.9
The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the number of L2PT encapsulated PVST config bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.10
The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the number of L2PT encapsulated PVST rst bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.11
The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the number of L2PT encapsulated PVST rst bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.12
The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the number of L2PT encapsulated PVST tcn bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.13
The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the number of L2PT encapsulated PVST tcn bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpConfigBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.14
The value of sapTlsL2ptStatsStpConfigBpdusRx indicates the number of STP config bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpConfigBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.15
The value of sapTlsL2ptStatsStpConfigBpdusTx indicates the number of STP config bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpRstBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.16
The value of sapTlsL2ptStatsStpRstBpdusRx indicates the number of STP rst bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpRstBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.17
The value of sapTlsL2ptStatsStpRstBpdusTx indicates the number of STP rst bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpTcnBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.18
The value of sapTlsL2ptStatsStpTcnBpdusRx indicates the number of STP tcn bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsStpTcnBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.19
The value of sapTlsL2ptStatsStpTcnBpdusTx indicates the number of STP tcn bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstConfigBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.20
The value of sapTlsL2ptStatsPvstConfigBpdusRx indicates the number of PVST config bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstConfigBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.21
The value of sapTlsL2ptStatsPvstConfigBpdusTx indicates the number of PVST config bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstRstBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.22
The value of sapTlsL2ptStatsPvstRstBpdusRx indicates the number of PVST rst bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstRstBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.23
The value of sapTlsL2ptStatsPvstRstBpdusTx indicates the number of PVST rst bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstTcnBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.24
The value of sapTlsL2ptStatsPvstTcnBpdusRx indicates the number of PVST tcn bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPvstTcnBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.25
The value of sapTlsL2ptStatsPvstTcnBpdusTx indicates the number of PVST tcn bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.26
The value of sapTlsL2ptStatsOtherBpdusRx indicates the number of other bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.27
The value of sapTlsL2ptStatsOtherBpdusTx indicates the number of other bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherL2ptBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.28
The value of sapTlsL2ptStatsOtherL2ptBpdusRx indicates the number of other L2PT bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherL2ptBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.29
The value of sapTlsL2ptStatsOtherL2ptBpdusTx indicates the number of other L2PT bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherInvalidBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.30
The value of sapTlsL2ptStatsOtherInvalidBpdusRx indicates the number of other invalid bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsOtherInvalidBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.31
The value of sapTlsL2ptStatsOtherInvalidBpdusTx indicates the number of other invalid bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapCdpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.32
The value of sapTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the number of L2PT encapsulated CDP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapCdpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.33
The value of sapTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the number of L2PT encapsulated CDP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapVtpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.34
The value of sapTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the number of L2PT encapsulated VTP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapVtpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.35
The value of sapTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the number of L2PT encapsulated VTP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapDtpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.36
The value of sapTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the number of L2PT encapsulated DTP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapDtpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.37
The value of sapTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the number of L2PT encapsulated DTP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPagpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.38
The value of sapTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the number of L2PT encapsulated PAGP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapPagpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.39
The value of sapTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the number of L2PT encapsulated PAGP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapUdldBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.40
The value of sapTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the number of L2PT encapsulated UDLD bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsL2ptEncapUdldBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.41
The value of sapTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the number of L2PT encapsulated UDLD bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsCdpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.42
The value of sapTlsL2ptStatsCdpBpdusRx indicates the number of CDP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsCdpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.43
The value of sapTlsL2ptStatsCdpBpdusTx indicates the number of CDP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsVtpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.44
The value of sapTlsL2ptStatsVtpBpdusRx indicates the number of VTP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsVtpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.45
The value of sapTlsL2ptStatsVtpBpdusTx indicates the number of VTP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsDtpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.46
The value of sapTlsL2ptStatsDtpBpdusRx indicates the number of DTP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsDtpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.47
The value of sapTlsL2ptStatsDtpBpdusTx indicates the number of DTP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPagpBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.48
The value of sapTlsL2ptStatsPagpBpdusRx indicates the number of PAGP bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsPagpBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.49
The value of sapTlsL2ptStatsPagpBpdusTx indicates the number of PAGP bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsUdldBpdusRx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.50
The value of sapTlsL2ptStatsUdldBpdusRx indicates the number of UDLD bpdus received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsL2ptStatsUdldBpdusTx 1.3.6.1.4.1.6527.3.1.2.4.3.42.1.51
The value of sapTlsL2ptStatsUdldBpdusTx indicates the number of UDLD bpdus transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEthernetInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.43
A table that contains Ethernet SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEthernetInfoEntry

sapEthernetInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.43.1
Information about a specific Ethernet SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEthernetInfoEntry  

sapEthernetLLFAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.43.1.1
sapEthernetLLFAdminStatus specifies whether or not Link- Loss Forwarding is enabled ('up'). When this object is set to 'up' the underlying port will be forced into the operationally 'down' state if the service is operationally 'down', or any of the 'sdpBindPwPeerStatusBits' are set, and will set the underlying port's tmnxPortEtherReasonDownFlags 'linklossFwd' bit. Setting this object to 'down' will clear the 'linklossFwd' reason. sapEthernetLLFAdminStatus can only be enabled on saps configured for an EPIPE service using an Ethernet port with the tmnxPortEncapType set to 'nullEncap.'
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAdminStatus  

sapEthernetLLFOperStatus 1.3.6.1.4.1.6527.3.1.2.4.3.43.1.2
sapEthernetLLFOperStatus indicates whether or not the underlying port is forced operationally 'down' due to the service being operationally 'down' or an sdpBindPwPeerStatusBits bit is set. sapEthernetLLFOperStatus is set to 'fault' when the sapEthernetLLFAdminStatus is set to 'up,' and either a fault has occurred on the pseudo-wire, or the service is down, otherwise sapEthernetLLFOperStatus is set to 'clear.'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fault(1), clear(2)  

msapPlcyTable 1.3.6.1.4.1.6527.3.1.2.4.3.44
The msapPlcyTable has an entry for each managed SAP(MSAP) policy configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsapPlcyEntry

msapPlcyEntry 1.3.6.1.4.1.6527.3.1.2.4.3.44.1
Each entry represents the configuration for a managed SAP(MSAP) policy. The values for each entry will be used to populate the following tables when the MSAP policy is applied to a MSAP: TIMETRA-SAP-MIB::sapBaseInfoTable TIMETRA-SAP-MIB::sapSubMgmtInfoTable
Status: current Access: not-accessible
OBJECT-TYPE    
  MsapPlcyEntry  

msapPlcyName 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.1
The value of msapPlcyName specifies the name of the MSAP policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

msapPlcyRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.2
The value of msapPlcyRowStatus is used for the creation and deletion of MSAP policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

msapPlcyLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.3
The value of msapPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapPlcyDescription 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.4
The value of msapPlcyDescription specifies the description of the MSAP policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

msapPlcyCpmProtPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.5
The value of msapPlcyCpmProtPolicyId specifies a CPM Protection policy for the MSAP policy. If a corresponding policy is not defined in TIMETRA-SECURITY-MIB::tmnxCpmProtPolTable, an 'inconsistentValue' error will be returned. A value of 254 specifies that the default CPM Protection policy is associated with the Managed SAP. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set msapPlcyCpmProtPolicyId to a non-zero value on one of these unsupported chassis types will return an 'inconsistentValue' error.
Status: current Access: read-create
OBJECT-TYPE    
  TCpmProtPolicyID  

msapPlcyCpmProtMonitorMac 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.6
The value of msapPlcyCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy, as specified by msapPlcyCpmProtPolicyId, must be applied. If the value of msapPlcyCpmProtMonitorMac is 'true', the per-source rate limit must be applied. If the value of msapPlcyCpmProtPolicyId is equal to zero, the value of msapPlcyCpmProtMonitorMac is irrelevant and will be ignored. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set msapPlcyCpmProtMonitorMac to 'true' on one of these unsupported chassis types will return an 'inconsistentValue' error.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

msapPlcySubMgmtDefSubId 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.7
The value of msapPlcySubMgmtDefSubId specifies what will be used as the default subscriber identification applicable on the MSAP. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this object is set to 'useSapId', the SAP-id will be used as the default subscriber identification string. In this case, msapPlcySubMgmtDefSubIdStr must contain the empty string, so any non-empty string in msapPlcySubMgmtDefSubIdStr will be set to an empty string. If the value of this object is set to 'useAutoId', the auto-generated subscriber identification string, as defined in tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber identification string. In this case, msapPlcySubMgmtDefSubIdStr must contain the empty string, so any non-empty string in msapPlcySubMgmtDefSubIdStr will be set to an empty string. If the value of this object is set to 'useString', the value of msapPlcySubMgmtDefSubIdStr will be used as the default subscriber identification string. In this case, an empty msapPlcySubMgmtDefSubIdStr means that there is no default subscriber identification configured.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxDefSubIdSource  

msapPlcySubMgmtDefSubIdStr 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.8
The value of msapPlcySubMgmtDefSubIdStr specifies the default subscriber identification string applicable on this MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtDefSubProfile 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.9
The value of msapPlcySubMgmtDefSubProfile specifies the default subscriber profile applicable on the MSAP. If a corresponding profile is not defined in tmnxSubProfileTable, an 'inconsistentValue' error will be returned. A value of 'default' is not allowed for this object.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtDefSlaProfile 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.10
The value of msapPlcySubMgmtDefSlaProfile specifies the default SLA profile applicable on the MSAP. If a corresponding profile is not defined in tmnxSLAProfileTable, an 'inconsistentValue' error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtDefAppProfile 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.11
The value of msapPlcySubMgmtDefAppProfile specifies the default application profile applicable on the MSAP. If a corresponding profile is not defined in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable, an 'inconsistentValue' error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtSubIdPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.12
The value of msapPlcySubMgmtSubIdPlcy specifies the subscriber identification policy applicable on the MSAP. If a corresponding profile is not defined in tmnxSubIdentPolicyTable, an 'inconsistentValue' error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

msapPlcySubMgmtSubscriberLimit 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.13
The value of msapPlcySubMgmtSubscriberLimit specifies the maximum number of subscribers allowed for the MSAP. A value is 0 means there is no limit. The values for the objects msapPlcySubMgmtProfiledTrafOnly, msapPlcySubMgmtNonSubTrafSubProf, and msapPlcySubMgmtNonSubTrafSlaProf are only meaningful when the value of msapPlcySubMgmtSubscriberLimit is 1 and will not be used when the value of msapPlcySubMgmtSubscriberLimit is not 1.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxSapSubscriberLimit  

msapPlcySubMgmtProfiledTrafOnly 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.14
The value of msapPlcySubMgmtProfiledTrafOnly specifies whether only profiled traffic is applicable for the MSAP. If set to 'true', the MSAP queues will be deleted. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

msapPlcySubMgmtNonSubTrafSubId 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.15
The value of msapPlcySubMgmtNonSubTrafSubId specifies the subscriber identification applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtNonSubTrafSubProf 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.16
The value of msapPlcySubMgmtNonSubTrafSubProf specifies the subscriber profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtNonSubTrafSlaProf 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.17
The value of msapPlcySubMgmtNonSubTrafSlaProf specifies the SLA profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcySubMgmtNonSubTrafAppProf 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.18
The value of msapPlcySubMgmtNonSubTrafAppProf specifies the Application profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcyAssociatedMsaps 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.19
The value of msapPlcyAssociatedMsaps indicates the number of MSAPs associated with this MSAP policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

msapPlcySubMgmtDefInterDestId 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.20
The value of msapPlcySubMgmtDefInterDestId specifies what will be used as the default intermediate destination identifier applicable on the MSAP. This value is used in case no other source (like Radius) provides an intermediate destination identifier. If the value of this object is set to 'useString', the value of msapPlcySubMgmtDefInterDestIdStr will be used as the default intermediate destination identifier. In this case, an empty msapPlcySubMgmtDefInterDestIdStr means that there is no default intermediate destination identifier configured. If the value of this object is set to 'useTopQTag', the top q-tag of the MSAP will be used as the default intermediate destination identifier. In this case, msapPlcySubMgmtDefInterDestIdStr must contain the empty string. If the value of this object is set to 'useVpi', the ATM VPI of the MSAP will be used as the default intermediate destination identifier. In this case, msapPlcySubMgmtDefInterDestIdStr must contain the empty string.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxDefInterDestIdSource  

msapPlcySubMgmtDefInterDestIdStr 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.21
The value of msapPlcySubMgmtDefSubIdStr specifies the default subscriber identification string applicable on this MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapPlcyIgmpTrkExpiryTime 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.22
The value of msapPlcyIgmpTrkExpiryTime specifies the time in seconds that this system continues to track an inactive host. The value zero specifies that the value must be set to the actual value of the object svcIgmpTrkExpiryTime of the service an MSAP belongs to.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..65535  

msapPlcyIgmpTrkImportPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.23
The value of the object msapPlcyIgmpTrkImportPlcy specifies the policy statement that must be applied to all incoming IGMP messages on the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

msapPlcyIgmpTrkMaxNbrGrps 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.24
The value of the object msapPlcyIgmpTrkMaxNbrGrps specifies how many group addresses are allowed for the MSAP. The value 0 means that no limit is imposed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1000  

msapPlcyIgmpTrkMaxNbrSrcs 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.25
The value of the object msapPlcyIgmpTrkMaxNbrSrcs specifies how many source addresses are allowed per group address for the MSAP. The value 0 means that no limit is imposed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1000  

msapPlcySubMgmtDefFilterProfile 1.3.6.1.4.1.6527.3.1.2.4.3.44.1.26
The value of msapPlcySubMgmtDefFilterProfile specifies the default filter profile applicable on the MSAP. The specified filter profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapTlsPlcyTable 1.3.6.1.4.1.6527.3.1.2.4.3.45
The msapTlsPlcyTable has an entry for each managed SAP (MSAP) policy configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsapTlsPlcyEntry

msapTlsPlcyEntry 1.3.6.1.4.1.6527.3.1.2.4.3.45.1
Each entry represents the VPLS-related configuration for a managed SAP (MSAP) policy. The values for each entry will be used to populate the following VPLS-related tables when the MSAP policy is applied to a MSAP: TIMETRA-SAP-MIB::sapTlsInfoTable TIMETRA-SAP-MIB::sapTlsDhcpInfoTable ALCATEL-IGMP-SNOOPING-MIB::tlsIgmpSnpgConfigTable
Status: current Access: not-accessible
OBJECT-TYPE    
  MsapTlsPlcyEntry  

msapTlsPlcyLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.1
The value of msapTlsPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapTlsPlcySplitHorizonGrp 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.2
The value of msapTlsPlcySplitHorizonGrp specifies the name of the split-horizon group for the MSAP. If the name specified does not correspond to a tlsShgInfoEntry for the VPLS service, the creation of the MSAP will fail. Additionally, if msapTlsPlcySplitHorizonGrp is set to a new value, the sapSplitHorizonGrp object for any existing MSAPs created by this policy will not be updated.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapTlsPlcyArpReplyAgent 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.3
The value of msapTlsPlcyArpReplyAgent specifies the status of the special ARP response mechanism in the system for ARP requests destined to static or dynamic hosts associated with the MSAP. 'disabled' - the ARP reply function is not operational 'enabled' - the ARP reply function is enabled without subscriber identification. 'enabledWithSubscrIdent' - the ARP reply function is enabled with subscriber identification.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), enabledWithSubscrIdent(3)  

msapTlsPlcySubMgmtMacDaHashing 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.4
The value of msapTlsPlcySubMgmtMacDaHashing specifies whether subscriber traffic egressing a LAG MSAP has its egress LAG link selected by a function of the MAC destination address instead of subscriber id.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

msapTlsPlcyDhcpLeasePopulate 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.5
The value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number of DHCP lease states allowed on the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..32767  

msapTlsPlcyDhcpPrxyAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.6
The value of msapTlsPlcyDhcpPrxyAdminState specifies the desired administrative state of the proxy server on the interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

msapTlsPlcyDhcpPrxyServAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.7
The value of msapTlsPlcyDhcpPrxyServAddrType specifies the address type of msapTlsPlcyDhcpPrxyServAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

msapTlsPlcyDhcpPrxyServAddr 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.8
The value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of the which will be used as the source address of the emulated DHCP server in the context of the VPLS MSAP. This address is mandatory for the proxy server capability and it should be in the context of the subnet represented by the VPLS.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

msapTlsPlcyDhcpPrxyLeaseTime 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.9
The value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how long a DHCP client is allowed to use the offered IP address. A value of 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A value of 7 days (315446399 seconds) is used when RADIUS does not provide a lease time.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 300..315446399  

msapTlsPlcyDhcpPrxyLTRadOverride 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.10
The value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of msapTlsPlcyDhcpPrxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When msapTlsPlcyDhcpPrxyLTRadOverride is set to 'true', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured lease time.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

msapTlsPlcyDhcpInfoAction 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.11
The value of msapTlsPlcyDhcpInfoAction specifies the DHCP option reforwarding policy: 'replace' - replace existing information with configured information 'drop' - discard messages with existing relay information if the option-82 information is also present 'keep' - retain the existing relay information
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)  

msapTlsPlcyDhcpCircuitId 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.12
The value of msapTlsPlcyDhcpCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it: none - the circuit-id suboption will not be part of the information option (Option 82). asciiTuple - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name is used. vlanAsciiTuple - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), asciiTuple(1), vlanAsciiTuple(2)  

msapTlsPlcyDhcpRemoteId 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.13
The value of msapTlsPlcyDhcpRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption will not be part of the information option (Option 82). If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of this object is set to 'remote-id', msapTlsPlcyDhcpRemoteIdString will represent the remote-id. By default, the remote-id value is none.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), mac(2), remote-id(3)  

msapTlsPlcyDhcpRemoteIdString 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.14
The value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id. The value of this object is ignored if msapTlsPlcyDhcpRemoteId does not have the value of 'remote-id'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapTlsPlcyDhcpVendorInclOpts 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.15
The value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded in the Alcatel-Lucent vendor specific sub-option of option 82. The value of this object is only used when msapTlsPlcyDhcpInfoAction is 'replace'.
Status: current Access: read-create
OBJECT-TYPE    
  BITS systemId(0), clientMac(1), serviceId(2), sapId(3)  

msapTlsPlcyDhcpVendorOptStr 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.16
The value of msapTlsPlcyDhcpVendorOptStr specifies the string that goes into the Alcatel-Lucent vendor specific sub-option of option 82. This string is only used when msapTlsPlcyDhcpInfoAction is set to 'replace'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapTlsPlcyEgressMcastGroup 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.17
The value of msapTlsPlcyEgressMcastGroup specifies the Egress Multicast Group for the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

msapTlsPlcyIgmpSnpgImportPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.18
The value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy statement that is be applied to all incoming IGMP messages on the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

msapTlsPlcyIgmpSnpgFastLeave 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.19
The value of msapTlsPlcyIgmpSnpgFastLeave specifies whether fast leave is allowed on this MSAP. If set to 'enabled', the system prunes the port on which an IGMP 'leave' message has been received without waiting for the Group Specific Query to timeout.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

msapTlsPlcyIgmpSnpgSendQueries 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.20
The value of msapTlsPlcyIgmpSnpgSendQueries specifies whether the system generates General Queries by itself on the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

msapTlsPlcyIgmpSnpgGenQueryIntv 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.21
The value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies the interval (in seconds) between two consecutive general queries sent by the system on the MSAP. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 2..1024  

msapTlsPlcyIgmpSnpgQueryRespIntv 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.22
The value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..1023  

msapTlsPlcyIgmpSnpgRobustCount 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.23
The value of msapTlsPlcyIgmpSnpgRobustCount specifies the robustness variable on the MSAP. This object allows tuning for the expected packet loss on the MSAP. If a MSAP is expected to be lossy, the Robustness Variable may be increased. IGMP snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 2..7  

msapTlsPlcyIgmpSnpgLastMembIntvl 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.24
The value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..50  

msapTlsPlcyIgmpSnpgMaxNbrGrps 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.25
The value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group addresses are allowed for the MSAP. The value 0 means that no limit is imposed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1000  

msapTlsPlcyIgmpSnpgMvrFromVplsId 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.26
The value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which VPLS the multicast streams corresponding to the groups learned via the MSAP are copied. Groups which cannot be joined to the corresponding MVR VPLS (because MVR is not up or the configured MVR policy rejects the group) copy the multicast streams from the local VPLS if IGMP snooping is up (i.e. tlsIgmpSnpgCfgAdminState is 'enabled').
Status: current Access: read-create
OBJECT-TYPE    
  TmnxServId  

msapTlsPlcyIgmpSnpgVersion 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.27
The value of msapTlsPlcyIgmpSnpgVersion specifies the version of IGMP running on the MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxIgmpVersion  

msapTlsPlcyIgmpSnpgMcacPlcyName 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.28
The value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name of the multicast CAC (Connection Admission Control) policy.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

msapTlsPlcyIgmpSnpgMcacUncnstBW 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.29
The value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in kilo-bits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is set to '0' and if a multicast CAC policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..2147483647  

msapTlsPlcyIgmpSnpgMcacPrRsvMnBW 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.30
The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilo-bits per second(kbps). If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is '0', no mandatory channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is '-1', then all mandatory and optional channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is equal to the value of msapTlsPlcyIgmpSnpgMcacUncnstBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed. The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW should always be less than or equal to that of msapTlsPlcyIgmpSnpgMcacUncnstBW. An attempt to set the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW greater than that of msapTlsPlcyIgmpSnpgMcacUncnstBW will result in 'inconsistentValue' error.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..2147483647  

msapTlsPlcyArpHostMaxNumHosts 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.31
The value of msapTlsPlcyArpHostMaxNumHosts specifies the maximum number of ARP hosts allowed on the TLS MSAP.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..32767  

msapTlsPlcyArpHostMinAuthIntvl 1.3.6.1.4.1.6527.3.1.2.4.3.45.1.32
The value of msapTlsPlcyArpHostMinAuthIntvl specifies the minimum interval between two consecutive authentication attempts for the same ARP host.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..6000  

msapIgmpSnpgMcacLevelTable 1.3.6.1.4.1.6527.3.1.2.4.3.46
The msapIgmpSnpgMcacLevelTable has an entry for each multicast CAC policy constraint level configured for a Managed SAP policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MSapIgmpSnpgMcacLevelEntry

msapIgmpSnpgMcacLevelEntry 1.3.6.1.4.1.6527.3.1.2.4.3.46.1
Each row entry represents a multicast CAC policy bundle level constraints for a particular Managed SAP policy. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  MSapIgmpSnpgMcacLevelEntry  

msapIgmpSnpgMcacLevelId 1.3.6.1.4.1.6527.3.1.2.4.3.46.1.1
The value of msapIgmpSnpgMcacLevelId indicates the level id of the multicast CAC policy bundle constraint. The value of level 1 has the highest priority and level 8 the lowest.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8  

msapIgmpSnpgMcacLevelRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.46.1.2
The value of msapIgmpSnpgMcacLevelRowStatus is used for creation and deletion of level constraint in a CAC for a Managed SAP policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

msapIgmpSnpgMcacLevelLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.46.1.3
The value of msapIgmpSnpgMcacLevelLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapIgmpSnpgMcacLevelBW 1.3.6.1.4.1.6527.3.1.2.4.3.46.1.4
The value of msapIgmpSnpgMcacLevelBW specifies the bandwidth in kilo-bits per second (kbps) for the level.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

msapIgmpSnpgMcacLagTable 1.3.6.1.4.1.6527.3.1.2.4.3.47
The msapIgmpSnpgMcacLagTable has an entry for each lag port configured for a multicast CAC policy bundle configured for a Managed SAP policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MSapIgmpSnpgMcacLagEntry

msapIgmpSnpgMcacLagEntry 1.3.6.1.4.1.6527.3.1.2.4.3.47.1
Each row entry represents a particular multicast CAC lag port constraints for a Managed SAP policy.. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  MSapIgmpSnpgMcacLagEntry  

msapIgmpSnpgMcacLagPortsDown 1.3.6.1.4.1.6527.3.1.2.4.3.47.1.1
The value of msapIgmpSnpgMcacLagPortsDown indicates the configured number of ports in a lag group that are down. If the number of ports available in the lag is reduced by the number of ports configured for msapIgmpSnpgMcacLagPortsDown object then bandwidth allowed for bundle will be updated to the value of msapIgmpSnpgMcacLevelBW indexed by msapIgmpSnpgMcacLagLevel value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8  

msapIgmpSnpgMcacLagRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.47.1.2
The value of msapIgmpSnpgMcacLagRowStatus is used for creation and deletion of lag constraint in a CAC policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

msapIgmpSnpgMcacLagLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.47.1.3
The value of msapIgmpSnpgMcacLagLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapIgmpSnpgMcacLagLevel 1.3.6.1.4.1.6527.3.1.2.4.3.47.1.4
The value of msapIgmpSnpgMcacLagLevel specifies the level id to use when the value of msapIgmpSnpgMcacLagPortsDown matches the actual number of ports down in a lag. Using the value of msapIgmpSnpgMcacLagLevel as an index, the operational MSAP unconstrained bandwidth will be set to msapIgmpSnpgMcacLevelBW. By default, for all lag constraints the link level will be set to 1 at row creation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8  

msapInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.48
A table that contains Managed SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MSapInfoEntry

msapInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.48.1
Information about a specific Managed SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MSapInfoEntry  

msapInfoCreationSapPortEncapVal 1.3.6.1.4.1.6527.3.1.2.4.3.48.1.1
The value of msapInfoCreationSapPortEncapVal indicates the port encapsulation value of the SAP with a sapSubType value of 'capture' that created this MSAP.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEncapVal  

msapInfoCreationPlcyName 1.3.6.1.4.1.6527.3.1.2.4.3.48.1.2
The value of msapInfoCreationPlcyName indicates the value of the msapPlcyName object for MSAP policy used to create this MSAP.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItem  

msapInfoReEvalPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.48.1.3
The value of msapInfoReEvalPolicy specifies whether to re-apply the Managed SAP policy associated with this MSAP. When a SET of this object is done with a value of 'doAction', the system will attempt to re-apply the MSAP policy indicated by msapInfoCreationPlcyName. If this action is successful, 'noError' will be returned. If this action is unsuccessful, an 'inconsistentValue' error will be returned. Attempting to SET this object with a value of 'notApplicable' will have no effect and will return 'noError'. SNMP GET and GETNEXT requests on this object will return 'notApplicable'.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxActionType  

msapInfoLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.48.1.4
The value of msapInfoLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapCaptureSapStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.49
A table that contains statistics for SAPs with a sapSubType value of 'capture'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MSapCaptureSapStatsEntry

msapCaptureSapStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.49.1
Statistics for a specific 'capture' SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MSapCaptureSapStatsEntry  

msapCaptureSapStatsTriggerType 1.3.6.1.4.1.6527.3.1.2.4.3.49.1.1
The value of msapCaptureSapStatsTriggerType indicates the type of trigger packets this entry is for.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER dhcp(1), pppoe(2), arp(3), dhcp6(4), ppp(5)  

msapCaptureSapStatsPktsRecvd 1.3.6.1.4.1.6527.3.1.2.4.3.49.1.2
The value of msapCaptureSapStatsPktsRecvd indicates the number of packets received on this 'capture' SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

msapCaptureSapStatsPktsRedirect 1.3.6.1.4.1.6527.3.1.2.4.3.49.1.3
The value of msapCaptureSapStatsPktsRedirect indicates the number of packets redirected on this 'capture' SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

msapCaptureSapStatsPktsDropped 1.3.6.1.4.1.6527.3.1.2.4.3.49.1.4
The value of msapCaptureSapStatsPktsDropped indicates the number of packets dropped on this 'capture' SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTable 1.3.6.1.4.1.6527.3.1.2.4.3.50
The sapTlsMrpTable augments sapTlsInfoTable with attributes of the Multiple Registration Protocol (MRP) feature for the TLS SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsMrpEntry

sapTlsMrpEntry 1.3.6.1.4.1.6527.3.1.2.4.3.50.1
MRP specific information about a SAP in a TLS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsMrpEntry  

sapTlsMrpRxPdus 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.1
The value of sapTlsMrpRxPdus indicates the number of MRP packets received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpDroppedPdus 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.2
The value of sapTlsMrpDroppedPdus indicates the number of dropped MRP packets on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxPdus 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.3
The value of sapTlsMrpTxPdus indicates the number of MRP packets transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxNewEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.4
The value of sapTlsMrpRxNewEvent indicates the number of 'New' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxJoinInEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.5
The value of sapTlsMrpRxJoinInEvent indicates the number of 'Join-In' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxInEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.6
The value of sapTlsMrpRxInEvent indicates the number of 'In' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxJoinEmptyEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.7
The value of sapTlsMrpRxJoinEmptyEvent indicates the number of 'Join Empty' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxEmptyEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.8
The value of sapTlsMrpRxEmptyEvent indicates the number of 'Empty' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpRxLeaveEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.9
The value of sapTlsMrpRxLeaveEvent indicates the number of 'Leave' MRP events received on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxNewEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.10
The value of sapTlsMrpTxNewEvent indicates the number of 'New' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxJoinInEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.11
The value of sapTlsMrpTxJoinInEvent indicates the number of 'Join-In' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxInEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.12
The value of sapTlsMrpTxInEvent indicates the number of 'In' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxJoinEmptyEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.13
The value of sapTlsMrpTxJoinEmptyEvent indicates the number of 'Join Empty' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxEmptyEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.14
The value of sapTlsMrpTxEmptyEvent indicates the number of 'Empty' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMrpTxLeaveEvent 1.3.6.1.4.1.6527.3.1.2.4.3.50.1.15
The value of sapTlsMrpTxLeaveEvent indicates the number of 'Leave' MRP events transmitted on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsMmrpTable 1.3.6.1.4.1.6527.3.1.2.4.3.51
This table contains an entry for each MAC address managed by Multiple MAC Registration Protocol (MMRP) on the SAP for the TLS. Entries are dynamically created and destroyed by the system as the MAC Addresses are registered or declared in MMRP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsMmrpEntry

sapTlsMmrpEntry 1.3.6.1.4.1.6527.3.1.2.4.3.51.1
MMRP specific information about a MAC address managed by MMRP on a SAP in a TLS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsMmrpEntry  

sapTlsMmrpMacAddr 1.3.6.1.4.1.6527.3.1.2.4.3.51.1.1
The value of sapTlsMmrpMacAddr indicates an ethernet MAC address which is being managed by MMRP on this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

sapTlsMmrpDeclared 1.3.6.1.4.1.6527.3.1.2.4.3.51.1.2
The value of sapTlsMmrpDeclared indicates whether the MRP applicant on this SAP is declaring this MAC address on behalf of MMRP.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsMmrpRegistered 1.3.6.1.4.1.6527.3.1.2.4.3.51.1.3
The value of sapTlsMmrpRegistered indicates whether the MRP registrant on this SAP has notified MMRP of a registration of this MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsMmrpEndStation 1.3.6.1.4.1.6527.3.1.2.4.3.51.1.4
The value of sapTlsMmrpEndStation indicates whether the MRP registrant on this SAP is registered per end station.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapIngQosHsmdaQueueTable 1.3.6.1.4.1.6527.3.1.2.4.3.52
The sapIngQosHsmdaQueueTable has an entry for each Hsmda SAP-level ingress queue override configured on the system. This table is obsoleted in 10.0 release.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosHsmdaQueueEntry

sapIngQosHsmdaQueueEntry 1.3.6.1.4.1.6527.3.1.2.4.3.52.1
Each row entry represents a Hsmda SAP-level ingress queue override record. Entries are created and deleted via SNMP SET operations on sapIngQosHsmdaQueueRowStatus.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SapIngQosHsmdaQueueEntry  

sapIngQosHsmdaQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.52.1.1
The value of sapIngQosHsmdaQueueId index specifies the Hsmda egress queue which this override record will affect.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TIngressHsmdaQueueId  

sapIngQosHsmdaQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.52.1.2
The value of sapIngQosHsmdaQueueRowStatus specifies...
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

sapIngQosHsmdaQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.52.1.3
The value of sapIngQosHsmdaQueueLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngQosHsmdaQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.4.3.52.1.4
The value of sapIngQosHsmdaQueueAdminPIR specifies the PIR rate in kbps allowed for this Hsmda ingress queue.
Status: obsolete Access: read-create
OBJECT-TYPE    
  THsmdaPIRKRateOverride  

sapIngQosHsmdaQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.4.3.52.1.5
The value of sapIngQosHsmdaQueueAdminCIR specifies the CIR rate in kbps allowed for this Hsmda ingress queue.
Status: obsolete Access: read-create
OBJECT-TYPE    
  THsmdaCIRKRateOverride  

sapIngQosHsmdaQueueSlopePolicy 1.3.6.1.4.1.6527.3.1.2.4.3.52.1.6
The value of sapIngQosHsmdaQueueSlopePolicy specifies the slope policy that defines the RED slopes for this Hsmda ingress queue.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapIngQosHsmdaQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.53
A table that contains ingress QoS HSMDA queue SAP statistics. This table is obsoleted in 10.0 release.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosHsmdaQueueStatsEntry

sapIngQosHsmdaQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.53.1
Ingress statistics about a specific SAP's QoS HSMDA queue.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SapIngQosHsmdaQueueStatsEntry  

sapIngHsmdaQStatCustId 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.1
The value of sapIngHsmdaQStatCustId indicates the customer ID for the statistics.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIngHsmdaQStatHiPktsDropped 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.2
The value of sapIngHsmdaQStatHiPktsDropped indicates the number of high-priority packets dropped on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaQStatLoPktsDropped 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.3
The value of sapIngHsmdaQStatLoPktsDropped indicates the number of low-priority packets dropped on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaQStatHiOctsDropped 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.4
The value of sapIngHsmdaQStatHiOctsDropped indicates the number of high-priority octets dropped on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaQStatLoOctsDropped 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.5
The value of sapIngHsmdaQStatLoOctsDropped indicates the number of low-priority octets dropped on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaQStatInProfPktsFwd 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.6
The value of sapIngHsmdaQStatInProfPktsFwd indicates the number of in-profile packets forwarded on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaQStatOutProfPktsFwd 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.7
The value of sapIngHsmdaQStatOutProfPktsFwd indicates the number of out-of-profile packets forwarded on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaQStatInProfOctsFwd 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.8
The value of sapIngHsmdaQStatInProfOctsFwd indicates the number of out-of-profile packets forwarded on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaQStatOutProfOctsFwd 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.9
The value of sapIngHsmdaQStatOutProfOctsFwd indicates the number of out-of-profile packets forwarded on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaQStatAllPktsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.10
The value of sapIngHsmdaQStatAllPktsOffered indicates the total number of packets offered on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaQStatAllOctsOffered 1.3.6.1.4.1.6527.3.1.2.4.3.53.1.11
The value of sapIngHsmdaQStatAllOctsOffered indicates the total number of octets offered on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosHsmdaCntrStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.54
A table that contains ingress QoS HSMDA counter SAP statistics. This table is obsoleted in 10.0 release.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosHsmdaCntrStatsEntry

sapIngQosHsmdaCntrStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.54.1
Ingress statistics about a specific SAP's QoS HSMDA counter.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SapIngQosHsmdaCntrStatsEntry  

sapIngHsmdaCntrStCntrId 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.1
The value of sapIngHsmdaCntrStCntrId indicates the counter ID for the statistics.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TIngressHsmdaCounterId  

sapIngHsmdaCntrStCustId 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.2
The value of sapIngHsmdaCntrStCustId indicates the customer ID for the statistics.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIngHsmdaCntrStHiPktDrop 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.3
The value of sapIngHsmdaCntrStHiPktDrop indicates the number of high-priority packets dropped for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaCntrStLoPktDrop 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.4
The value of sapIngHsmdaCntrStLoPktDrop indicates the number of low-priority packets dropped for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaCntrStHiOctDrop 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.5
The value of sapIngHsmdaCntrStHiOctDrop indicates the number of high-priority octets dropped for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaCntrStLoOctDrop 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.6
The value of sapIngHsmdaCntrStLoOctDrop indicates the number of low-priority octets dropped for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaCntrStInProfPktFwd 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.7
The value of sapIngHsmdaCntrStInProfPktFwd indicates the number of in-profile packets forwarded for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaCntrStOutProfPktFwd 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.8
The value of sapIngHsmdaCntrStOutProfPktFwd indicates the number of out-of-profile packets forwarded for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaCntrStInProfOctFwd 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.9
The value of sapIngHsmdaCntrStInProfOctFwd indicates the number of out-of-profile packets forwarded for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaCntrStOutProfOctFwd 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.10
The value of sapIngHsmdaCntrStOutProfOctFwd indicates the number of out-of-profile packets forwarded for the ingress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaCntrStAllPktOffered 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.11
The value of sapIngHsmdaCntrStAllPktOffered indicates the total number of packets offered on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngHsmdaCntrStAllOctOffered 1.3.6.1.4.1.6527.3.1.2.4.3.54.1.12
The value of sapIngHsmdaCntrStAllOctOffered indicates the total number of octets offered on ingress on this SAP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosHsmdaQueueTable 1.3.6.1.4.1.6527.3.1.2.4.3.55
The sapEgrQosHsmdaQueueTable has an entry for each Hsmda SAP-level egress queue override configured on the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosHsmdaQueueEntry

sapEgrQosHsmdaQueueEntry 1.3.6.1.4.1.6527.3.1.2.4.3.55.1
Each row entry represents a Hsmda SAP-level egress queue override record. Entries are created and deleted via SNMP SET operations on sapEgrQosHsmdaQueueRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosHsmdaQueueEntry  

sapEgrQosHsmdaQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.55.1.1
The value of sapEgrQosHsmdaQueueId index specifies the Hsmda egress queue which this override record will affect.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgressHsmdaQueueId  

sapEgrQosHsmdaQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.55.1.2
The value of sapEgrQosHsmdaQueueRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapEgrQosHsmdaQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.55.1.3
The value of sapEgrQosHsmdaQueueLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrQosHsmdaQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.4.3.55.1.4
The value of sapEgrQosHsmdaQueueAdminPIR specifies the PIR rate in kbps allowed for this Hsmda ingress queue.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaPIRKRateOverride  

sapEgrQosHsmdaQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.4.3.55.1.5
The value of sapEgrQosHsmdaQueueAdminCIR specifies the CIR rate in kbps allowed for this Hsmda ingress queue. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  THsmdaCIRKRateOverride  

sapEgrQosHsmdaQueueSlopePolicy 1.3.6.1.4.1.6527.3.1.2.4.3.55.1.6
The value of sapEgrQosHsmdaQueueSlopePolicy specifies the slope policy that defines the RED slopes for this Hsmda ingress queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapEgrQosHsmdaQueueWrrWeight 1.3.6.1.4.1.6527.3.1.2.4.3.55.1.7
The value of sapEgrQosHsmdaQueueWrrWeight specifies the weighted round-robin weight override for the given egress hsmda queue on this SAP. When set to default value, the weighted round-robin weight is not overridden and the weighted round-robin weight from the sap-egress qos policy is honored. When a non-default value is given, that is used instead of the weighted round-robin weight given in the sap-egress policy.
Status: current Access: read-create
OBJECT-TYPE    
  THsmdaWrrWeightOverride  

sapEgrQosHsmdaQueueMBS 1.3.6.1.4.1.6527.3.1.2.4.3.55.1.8
The value of sapEgrQosHsmdaQueueMBS specifies the maximum buffer space (MBS) override in bytes for the given egress hsmda queue on this SAP. When set to default value, the MBS is not overridden and the MBS from the sap-egress qos policy is honored. When a non-default value is given, that is used instead of the MBS given in the sap-egress policy.
Status: current Access: read-create
OBJECT-TYPE    
  THSMDABurstSizeBytesOverride  

sapEgrQosHsmdaQueueStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.56
A table that contains egress QoS HSMDA queue SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosHsmdaQueueStatsEntry

sapEgrQosHsmdaQueueStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.56.1
Egress statistics about a specific SAP's QoS HSMDA queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosHsmdaQueueStatsEntry  

sapEgrHsmdaQStatCustId 1.3.6.1.4.1.6527.3.1.2.4.3.56.1.1
The value of sapEgrHsmdaQStatCustId indicates the customer ID for the statistics.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrHsmdaQStatInProfPktFwd 1.3.6.1.4.1.6527.3.1.2.4.3.56.1.2
The value of sapEgrHsmdaQStatInProfPktFwd indicates the number of in-profile packets forwarded on egress on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaQStatInProfPktDropd 1.3.6.1.4.1.6527.3.1.2.4.3.56.1.3
The value of sapEgrHsmdaQStatInProfPktDropd indicates the number of in-profile packets dropped on egress on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaQStatOutProfPktFwd 1.3.6.1.4.1.6527.3.1.2.4.3.56.1.4
The value of sapEgrHsmdaQStatOutProfPktFwd indicates the number of out-of-profile packets forwarded on egress on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaQStatOutProfPktDropd 1.3.6.1.4.1.6527.3.1.2.4.3.56.1.5
The value of sapEgrHsmdaQStatOutProfPktDropd indicates the number of out-of-profile packets dropped on egress on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaQStatInProfOctFwd 1.3.6.1.4.1.6527.3.1.2.4.3.56.1.6
The value of sapEgrHsmdaQStatInProfOctFwd indicates the number of out-of-profile packets forwarded on egress on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaQStatInProfOctDropd 1.3.6.1.4.1.6527.3.1.2.4.3.56.1.7
The value of sapEgrHsmdaQStatInProfOctDropd indicates the number of out-of-profile packets dropped on egress on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaQStatOutProfOctFwd 1.3.6.1.4.1.6527.3.1.2.4.3.56.1.8
The value of sapEgrHsmdaQStatOutProfOctFwd indicates the number of out-of-profile packets forwarded on egress on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaQStatOutProfOctDropd 1.3.6.1.4.1.6527.3.1.2.4.3.56.1.9
The value of sapEgrHsmdaQStatOutProfOctDropd indicates the number of out-of-profile packets dropped on egress on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosHsmdaCntrStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.57
A table that contains egress QoS HSMDA counter SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosHsmdaCntrStatsEntry

sapEgrQosHsmdaCntrStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.57.1
Egress statistics about a specific SAP's QoS HSMDA counter.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosHsmdaCntrStatsEntry  

sapEgrHsmdaCntrStCntrId 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.1
The value of sapEgrHsmdaCntrStCntrId indicates the counter ID for the statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgressHsmdaCounterId  

sapEgrHsmdaCntrStCustId 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.2
The value of sapEgrHsmdaCntrStCustId indicates the customer ID for the statistics.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrHsmdaCntrStInProfPktFwd 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.3
The value of sapEgrHsmdaCntrStInProfPktFwd indicates the number of in-profile packets forwarded for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaCntrStInProfPktDrop 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.4
The value of sapEgrHsmdaCntrStInProfPktDrop indicates the number of in-profile packets dropped for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaCntrStOutProfPktFwd 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.5
The value of sapEgrHsmdaCntrStOutProfPktFwd indicates the number of out-of-profile packets forwarded for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaCntrStOutProfPktDrop 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.6
The value of sapEgrHsmdaCntrStOutProfPktDrop indicates the number of out-of-profile packets dropped for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaCntrStInProfOctFwd 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.7
The value of sapEgrHsmdaCntrStInProfOctFwd indicates the number of out-of-profile packets forwarded for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaCntrStInProfOctDrop 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.8
The value of sapEgrHsmdaCntrStInProfOctDrop indicates the number of out-of-profile packets dropped for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaCntrStOutProfOctFwd 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.9
The value of sapEgrHsmdaCntrStOutProfOctFwd indicates the number of out-of-profile packets forwarded for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrHsmdaCntrStOutProfOctDrop 1.3.6.1.4.1.6527.3.1.2.4.3.57.1.10
The value of sapEgrHsmdaCntrStOutProfOctDrop indicates the number of out-of-profile packets dropped for the egress counter, specified by the index sapIngHsmdaCntrStCntrId, on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

msapL3PlcyTable 1.3.6.1.4.1.6527.3.1.2.4.3.58
The msapL3PlcyTable has an entry for each managed SAP (MSAP) policy configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsapL3PlcyEntry

msapL3PlcyEntry 1.3.6.1.4.1.6527.3.1.2.4.3.58.1
Each entry represents the L3-related configuration for a managed SAP (MSAP) policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  MsapL3PlcyEntry  

msapL3PlcyLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.58.1.1
The value of msapL3PlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapL3PlcyAntiSpoof 1.3.6.1.4.1.6527.3.1.2.4.3.58.1.2
The value of the object msapL3PlcyAntiSpoof specifies the type of anti-spoof filtering applicable on this MSAP. 'nextHopIpAndMacAddr (4)' is not supported on SR-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sourceIpAndMacAddr(3), nextHopIpAndMacAddr(4)  

msapPlcyTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.59
The value of msapPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapTlsPlcyTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.60
The value of msapTlsPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapTlsPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapIgmpSnpgMcacLvlTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.61
The value of msapIgmpSnpgMcacLvlTblLastChgd indicates the sysUpTime at the time of the last modification of msapIgmpSnpgMcacLevelTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapIgmpSnpgMcacLagTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.62
The value of msapIgmpSnpgMcacLagTblLastChgd indicates the sysUpTime at the time of the last modification of msapIgmpSnpgMcacLagTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapInfoTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.63
The value of msapInfoTblLastChgd indicates the sysUpTime at the time of the last modification of msapInfoTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapL3PlcyTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.64
The value of msapL3PlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapL3PlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapAtmPlcyTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.118
The value of msapAtmPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapAtmPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapStaticHostMRtTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.65
The value of sapStaticHostMRtTblLastChgd indicates the sysUpTime at the time of the last modification of sapStaticHostMRtTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapStaticHostMRtTable 1.3.6.1.4.1.6527.3.1.2.4.3.66
The sapStaticHostMRtTable contains managed routes of SAP static hosts. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapStaticHostMRtEntry

sapStaticHostMRtEntry 1.3.6.1.4.1.6527.3.1.2.4.3.66.1
Each row entry represents information on a specific managed route.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapStaticHostMRtEntry  

sapStaticHostMRtAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.66.1.1
The value of sapStaticHostMRtAddrType indicates the address type of sapStaticHostMRtAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

sapStaticHostMRtAddr 1.3.6.1.4.1.6527.3.1.2.4.3.66.1.2
The value of sapStaticHostMRtAddr indicates the IP address of the managed route.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

sapStaticHostMRtPrefixLen 1.3.6.1.4.1.6527.3.1.2.4.3.66.1.3
The value of sapStaticHostMRtPrefixLen indicates the prefix length of the subnet associated with sapStaticHostMRtAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength 0..32  

sapStaticHostMRtRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.66.1.4
The value of sapStaticHostMRtRowStatus controls the creation and deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapStaticHostMRtLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.66.1.5
The value of sapStaticHostMRtLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapStaticHostMRtStatus 1.3.6.1.4.1.6527.3.1.2.4.3.66.1.6
The value of svcDhcpManagedRouteStatus indicates the state of this managed route.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxManagedRouteStatus  

sapTlsArpHostTableLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.67
The value of sapTlsArpHostTableLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to the sapTlsArpHostTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsArpHostTable 1.3.6.1.4.1.6527.3.1.2.4.3.68
A table that contains ARP host configuration information about a SAP in a TLS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsArpHostEntry

sapTlsArpHostEntry 1.3.6.1.4.1.6527.3.1.2.4.3.68.1
ARP host specific information about a SAP in a TLS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsArpHostEntry  

sapTlsArpHostLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.68.1.1
The value of sapTlsArpHostLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsArpHostAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.68.1.2
The value of the object sapTlsArpHostAdminState specifies the administrative state of the ARP host functionality on this TLS SAP.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxAdminState  

sapTlsArpHostMaxNumHosts 1.3.6.1.4.1.6527.3.1.2.4.3.68.1.3
The value of sapTlsArpHostMaxNumHosts specifies the maximum number of ARP hosts allowed on this TLS SAP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32767  

sapTlsArpHostMinAuthIntvl 1.3.6.1.4.1.6527.3.1.2.4.3.68.1.4
The value of sapTlsArpHostMinAuthIntvl specifies the minimum interval between two consecutive authentication attempts for the same ARP host.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..6000  

sapIgmpTrkTableLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.69
The value of sapIgmpTrkTableLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to the sapIgmpTrkTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIgmpTrkTable 1.3.6.1.4.1.6527.3.1.2.4.3.70
A table that contains IGMP host tracking configuration information about SAP's. The system automatically creates an entry in this table for each SAP where it creates a corresponding entry in the sapSubMgmtInfoTable. This means that all SAP's that support Enhanced Subscriber Management have en entry in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIgmpTrkEntry

sapIgmpTrkEntry 1.3.6.1.4.1.6527.3.1.2.4.3.70.1
IGMP host tracking specific information about a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIgmpTrkEntry  

sapIgmpTrkLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.70.1.1
The value of sapIgmpTrkLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIgmpTrkExpiryTime 1.3.6.1.4.1.6527.3.1.2.4.3.70.1.2
The value of sapIgmpTrkExpiryTime specifies the time in seconds that this system continues to track an inactive host. The value zero specifies that the value must be set to the actual value of the object svcIgmpTrkExpiryTime of the service this SAP belongs to.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..65535  

sapIgmpTrkImportPlcy 1.3.6.1.4.1.6527.3.1.2.4.3.70.1.3
The value of the object sapIgmpTrkImportPlcy specifies the policy statement that must be applied to all incoming IGMP messages on this SAP.
Status: current Access: read-write
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

sapIgmpTrkMaxNbrGrps 1.3.6.1.4.1.6527.3.1.2.4.3.70.1.4
The value of the object sapIgmpTrkMaxNbrGrps specifies how many group addresses are allowed for this SAP. The value 0 means that no limit is imposed.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000  

sapIgmpTrkNbrGrps 1.3.6.1.4.1.6527.3.1.2.4.3.70.1.5
The value of the object sapIgmpTrkNbrGrps indicates how many group addresses are tracked for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapIgmpTrkMaxNbrSrcs 1.3.6.1.4.1.6527.3.1.2.4.3.70.1.6
The value of the object sapIgmpTrkMaxNbrSrcs specifies how many source addresses are allowed per group address for this SAP. The value 0 means that no limit is imposed.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000  

sapIgmpTrkDisRtrAlertChk 1.3.6.1.4.1.6527.3.1.2.4.3.70.1.7
sapIgmpTrkDisRtrAlertChk is used to enable/disable router alert checking for IGMP messages received on this sap. If this flag is set to 'true', checking is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapFrInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.71
A table that contains FR SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapFrInfoEntry

sapFrInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.71.1
Information about a specific FR SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapFrInfoEntry  

sapFrInfoFrf12Mode 1.3.6.1.4.1.6527.3.1.2.4.3.71.1.1
The value of sapFrInfoFrf12Mode enables or disables the use of FRF12 headers. This must be set to disabled for this entry to be added to a mlfr bundle.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapFrInfoSchedulingClass 1.3.6.1.4.1.6527.3.1.2.4.3.71.1.2
The value of sapFrInfoSchedulingClass specifies the scheduling class to use for this sap. This object is only applicable for a sapPortId that has tmnxBundleType set to 'mlfr', sapFrInfoFrf12Mode SAPs set to 'enabled' or tmnxFrIntfFrf12Mode set to 'enabled' and sapFrf12InfoInterleave set to 'disabled'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxMcFrClassIndex  

sapFrInfoLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.71.1.3
The value of sapFrInfoLastChanged indicates the sysUpTime at the time of the last modification of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapFrf12InfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.74
A table that contains FRF12 SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapFrf12InfoEntry

sapFrf12InfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.74.1
Information about a specific FR SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapFrf12InfoEntry  

sapFrf12InfoFragmentThreshold 1.3.6.1.4.1.6527.3.1.2.4.3.74.1.1
The value of sapFrf12InfoFragmentThreshold specifies the maximum length of a fragment to be transmitted.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 128..512  

sapFrf12InfoLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.74.1.2
The value of sapFrf12InfoLastChanged indicates the sysUpTime at the time of the last modification of this entry..
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapFrf12InfoInterleave 1.3.6.1.4.1.6527.3.1.2.4.3.74.1.3
The value of sapFrf12InfoInterleave specifies whether or not FRF12 interleave is enabled. If enabled, sapFrInfoSchedulingClass is not applicable.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapArpHostStatTable 1.3.6.1.4.1.6527.3.1.2.4.3.75
A table that contains ARP host status and statistics information about SAP's.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapArpHostStatEntry

sapArpHostStatEntry 1.3.6.1.4.1.6527.3.1.2.4.3.75.1
ARP host specific status and statistics information about a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapArpHostStatEntry  

sapArpHostStatLastClearedTime 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.1
The value of sapArpHostStatLastClearedTime indicates the last time that these stats were cleared. The value zero indicates that they have not been cleared yet.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapArpHostStatNumHosts 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.2
The value of sapArpHostStatNumHosts indicates the actual number of ARP hosts on this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapArpHostStatTriggersRx 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.3
The value of sapArpHostStatTriggersRx indicates the number of ARP triggers received on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapArpHostStatTriggersIgnored 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.4
The value of sapArpHostStatTriggersIgnored indicates the number of ARP triggers received on this SAP that did not result in the creation of a new ARP host since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared. This number does not include the number indicated by sapArpHostStatTrigIgnQFull.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapArpHostStatTrigIgnQFull 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.5
The value of sapArpHostStatTrigIgnQFull indicates the number of ARP triggers received on this SAP that did not result in the creation of a new ARP host because the internal ARP trigger event queue of the system was full, since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapArpHostStatNumForcedVerif 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.6
The value of sapArpHostStatNumForcedVerif indicates the number of times that the system started a forced subscriber host connectivity verification for an ARP host on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapArpHostStatNumCreated 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.7
The value of sapArpHostStatNumCreated indicates the number of times that an ARP host was created on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapArpHostStatNumDeleted 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.8
The value of sapArpHostStatNumDeleted indicates the number of times that an ARP host was deleted on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapArpHostStatNumUpdated 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.9
The value of sapArpHostStatNumUpdated indicates the number of times that an ARP host was updated on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapArpHostStatNumAuthReq 1.3.6.1.4.1.6527.3.1.2.4.3.75.1.10
The value of sapArpHostStatNumAuthReq indicates the number of times that the system initiated an authentication request for an ARP host on this SAP since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPbbTable 1.3.6.1.4.1.6527.3.1.2.4.3.76
A table that contains Provider Backbone Bridging (PBB/IEEE 802.1ah) SAP information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapPbbEntry

sapPbbEntry 1.3.6.1.4.1.6527.3.1.2.4.3.76.1
PBB I-Component instance-specific information about a specific SAP in the B-Component instance. Entries in this table can be created or deleted via SNMP operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapPbbEntry  

sapPbbSvcIdIVpls 1.3.6.1.4.1.6527.3.1.2.4.3.76.1.1
The value of the object sapPbbSvcIdIVpls specifies the Service identifier of the I-Component instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxServId  

sapPbbSvcIdBVpls 1.3.6.1.4.1.6527.3.1.2.4.3.76.1.2
The value of the object sapPbbSvcIdBVpls specifies the Service identifier of the B-Component instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxServId  

sapPbbPortId 1.3.6.1.4.1.6527.3.1.2.4.3.76.1.3
The value of the object sapPbbPortId specifies the ID of the access port in the B-Component instance where this SAP is defined.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPortID  

sapPbbEncapValue 1.3.6.1.4.1.6527.3.1.2.4.3.76.1.4
The value of the object sapPbbEncapValue specifies the value of the label used to identify this SAP in the B-Component instance on the access port specified by sapPortId.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxEncapVal  

sapPbbRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.76.1.5
The value of sapPbbRowStatus specifies the row status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapPbbLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.76.1.6
The value of sapPbbLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapPbbIgmpSnpgMRouter 1.3.6.1.4.1.6527.3.1.2.4.3.76.1.7
The value of the object sapPbbIgmpSnpgMRouter specifies if a multicast router is attached behind this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapFPropBMacAddrTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.77
The value of sapFPropBMacAddrTblLastChgd indicates the sysUpTime of the last modification of sapFPropBMacAddrTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapFPropBMacAddrTable 1.3.6.1.4.1.6527.3.1.2.4.3.78
sapFPropBMacAddrTable contains the optional configured backbone MAC (BMac) addresses (or MAC names) for each SAP. This table extends the information in sapBaseInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapFPropBMacAddrEntry

sapFPropBMacAddrEntry 1.3.6.1.4.1.6527.3.1.2.4.3.78.1
sapFPropBMacAddrEntry defines a row in the sapFPropBMacAddrTable. The first three index objects reside in sapBaseInfoTable. Rows are created and destroyed using sapFPropBMacAddrRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapFPropBMacAddrEntry  

sapFPropBMacAddrMacNameOrAddrTag 1.3.6.1.4.1.6527.3.1.2.4.3.78.1.1
The value of sapFPropBMacAddrMacNameOrAddrTag specifies whether sapFPropBMacAddrMacNameOrAddr contains a MAC name, or a MAC address.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER macName(1), macAddr(2)  

sapFPropBMacAddrMacNameOrAddr 1.3.6.1.4.1.6527.3.1.2.4.3.78.1.2
The value of sapFPropBMacAddrMacNameOrAddr specifies a MAC name or MAC address configured against a index triple. When sapFPropBMacAddrMacNameOrAddrTag is 'macName (1)', sapFPropBMacAddrMacNameOrAddr must contain a MAC name which is present in the svcMacName column of the svcMacNameTable. When sapFPropBMacAddrMacNameOrAddrTag is 'macAddr (2)', sapFPropBMacAddrMacNameOrAddr must contain a MAC address, encoded in network byte order and IEEE 802.3 canonical bit order as defined in IEEE Std 802-2001. All the MAC addresses configured for a particular SAP (whether configured as MAC addresses, or via MAC names) must refer to one B-VPLS on the remote system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapFPropBMacAddrRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.78.1.3
The value of sapFPropBMacAddrRowStatus specifies the status of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapIpv6HostInfoTable 1.3.6.1.4.1.6527.3.1.2.4.3.79
sapIpv6HostInfoTable contains IPv6 information related to a routed CO subscriber SAP. This table complements sapBaseInfoTable, and contains an entry for each routed CO subscriber SAP. Rows in this table are created and deleted automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIpv6HostInfoEntry

sapIpv6HostInfoEntry 1.3.6.1.4.1.6527.3.1.2.4.3.79.1
IPv6 specific information for a routed CO subscriber SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIpv6HostInfoEntry  

sapIpv6HostInfoIpoeDhcp6Hosts 1.3.6.1.4.1.6527.3.1.2.4.3.79.1.1
The value of the object sapIpv6HostInfoIpoeDhcp6Hosts indicates the number of IPoE DHCPv6 hosts for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapIpv6HostInfoPppDhcp6Hosts 1.3.6.1.4.1.6527.3.1.2.4.3.79.1.2
The value of the object sapIpv6HostInfoPppDhcp6Hosts indicates the number of PPP DHCPv6 hosts for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapIpv6HostInfoPppSLAACHosts 1.3.6.1.4.1.6527.3.1.2.4.3.79.1.3
The value of the object sapIpv6HostInfoPppSLAACHosts indicates the number of PPP SLAAC hosts for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapIpv6HostInfoIpoeSLAACHosts 1.3.6.1.4.1.6527.3.1.2.4.3.79.1.4
The value of the object sapIpv6HostInfoIpoeSLAACHosts indicates the number of IPoE SLAAC hosts for this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapIngPlcrCtrlOvrTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.80
sapIngPlcrCtrlOvrTblLastChgd indicates the timestamp of last change to the sapIngPlcrCtrlOvrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngPlcrCtrlOvrTable 1.3.6.1.4.1.6527.3.1.2.4.3.81
A table that contains SAP ingress policer control override information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngPlcrCtrlOvrEntry

sapIngPlcrCtrlOvrEntry 1.3.6.1.4.1.6527.3.1.2.4.3.81.1
Policer control override information about a specific SAP on the ingress side.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngPlcrCtrlOvrEntry  

sapIngPlcrCtrlOvrRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.81.1.1
This is the Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapIngPlcrCtrlOvrLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.81.1.2
The value of sapIngPlcrCtrlOvrLastChgd indicates the timestamp of last change to this row in sapIngPlcrCtrlOvrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngPlcrCtrlOvrMaxRate 1.3.6.1.4.1.6527.3.1.2.4.3.81.1.3
The value of sapIngPlcrCtrlOvrMaxRate specifies the maximum frame based bandwidth limit of this policer override.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRateOverride  

sapIngPlcrCtrlOvrMinMBSSep 1.3.6.1.4.1.6527.3.1.2.4.3.81.1.4
The value of sapIngPlcrCtrlOvrMinMBSSep specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer override.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytesOverride  

sapIngPlcrCtrlOvrLvlTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.82
sapIngPlcrCtrlOvrLvlTblLastChgd indicates the timestamp of last change to the sapIngPlcrCtrlOvrLvlTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngPlcrCtrlOvrLvlTable 1.3.6.1.4.1.6527.3.1.2.4.3.83
A table that contains SAP ingress policer control override information for the priority level.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngPlcrCtrlOvrLvlEntry

sapIngPlcrCtrlOvrLvlEntry 1.3.6.1.4.1.6527.3.1.2.4.3.83.1
Policer control priority level override information about a specific SAP on the ingress side. Entries are created/deleted automatically by the system when entries are created/delete in the sapIngPlcrCtrlOvrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngPlcrCtrlOvrLvlEntry  

sapIngPlcrCtrlOvrLvlLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.83.1.1
The value of sapIngPlcrCtrlOvrLvlLastChgd indicates the timestamp of last change to this row in sapIngPlcrCtrlOvrLvlTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngPlcrCtrlOvrLvlMBS 1.3.6.1.4.1.6527.3.1.2.4.3.83.1.2
The value of sapIngPlcrCtrlOvrLvlMBS specifies the maximum amount of cumulative buffer space (in bytes) allowed for this level by the policer of this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytesOverride  

sapIngPlcrOvrTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.86
sapIngPlcrOvrTblLastChgd indicates the timestamp of last change to the sapIngPlcrOvrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngPlcrOvrTable 1.3.6.1.4.1.6527.3.1.2.4.3.87
A table that contains SAP ingress policer control override information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngPlcrOvrEntry

sapIngPlcrOvrEntry 1.3.6.1.4.1.6527.3.1.2.4.3.87.1
Policer control override information about a specific policer of the SAP on the ingress side.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngPlcrOvrEntry  

sapIngPlcrOvrRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.1
This is the Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapIngPlcrOvrLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.2
The value of sapIngPlcrOvrLastChgd indicates the timestamp of last change to this row in sapIngPlcrOvrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapIngPlcrOvrAdminPIR 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.3
sapIngPlcrOvrAdminPIR specifies the administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRateOverride  

sapIngPlcrOvrAdminCIR 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.4
sapIngPlcrOvrAdminCIR specifies the administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolCIRRateOverride  

sapIngPlcrOvrStatMode 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.5
sapIngPlcrOvrStatMode specifies the mode of statistics collected by this policer on this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxIngPolicerStatModeOverride  

sapIngPlcrOvrMBS 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.6
sapIngPlcrOvrMBS specifies the maximum amount of buffer space (in bytes) allowed for the queue by this policer on this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytesOverride  

sapIngPlcrOvrPktOffset 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.7
sapIngPlcrOvrPktOffset specifies the packet byte offset for addition of policing information by this policer on this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TPerPacketOffsetOvr  

sapIngPlcrOvrCBS 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.8
sapIngPlcrOvrCBS specifies the amount of reserved buffer space (in bytes) for the queue set by this policer on this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytesOverride  

sapIngPlcrOvrAdminPIRPercent 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.9
The value of sapIngPlcrOvrAdminPIRPercent specifies the desired administrative PIR value for this policer as a percentage.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRPercentOverride  

sapIngPlcrOvrAdminCIRPercent 1.3.6.1.4.1.6527.3.1.2.4.3.87.1.10
The value of sapIngPlcrOvrAdminCIRPercent specifies the desired administrative CIR value for this policer as a percentage.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRPercentOverride  

sapEgrPlcrCtrlOvrTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.88
sapEgrPlcrCtrlOvrTblLastChgd indicates the timestamp of last change to the sapEgrPlcrCtrlOvrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrPlcrCtrlOvrTable 1.3.6.1.4.1.6527.3.1.2.4.3.89
A table that contains SAP egress policer control override information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrPlcrCtrlOvrEntry

sapEgrPlcrCtrlOvrEntry 1.3.6.1.4.1.6527.3.1.2.4.3.89.1
Policer control override information about a specific SAP on the egress side.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrPlcrCtrlOvrEntry  

sapEgrPlcrCtrlOvrRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.89.1.1
This is the Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapEgrPlcrCtrlOvrLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.89.1.2
The value of sapEgrPlcrCtrlOvrLastChgd indicates the timestamp of last change to this row in sapEgrPlcrCtrlOvrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrPlcrCtrlOvrMaxRate 1.3.6.1.4.1.6527.3.1.2.4.3.89.1.3
The value of sapEgrPlcrCtrlOvrMaxRate specifies the maximum frame based bandwidth limit of this policer override.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRateOverride  

sapEgrPlcrCtrlOvrMinMBSSep 1.3.6.1.4.1.6527.3.1.2.4.3.89.1.4
The value of sapEgrPlcrCtrlOvrMinMBSSep specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer override.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytesOverride  

sapEgrPlcrCtrlOvrLvlTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.90
sapEgrPlcrCtrlOvrLvlTblLastChgd indicates the timestamp of last change to the sapEgrPlcrCtrlOvrLvlTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrPlcrCtrlOvrLvlTable 1.3.6.1.4.1.6527.3.1.2.4.3.91
A table that contains SAP egress policer control override information for the priority level.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrPlcrCtrlOvrLvlEntry

sapEgrPlcrCtrlOvrLvlEntry 1.3.6.1.4.1.6527.3.1.2.4.3.91.1
Policer control priority level override information about a specific SAP on the egress side. Entries are created/deleted automatically by the system when entries are created/delete in the sapEgrPlcrCtrlOvrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrPlcrCtrlOvrLvlEntry  

sapEgrPlcrCtrlOvrLvlLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.91.1.1
The value of sapEgrPlcrCtrlOvrLvlLastChgd indicates the timestamp of last change to this row in sapEgrPlcrCtrlOvrLvlTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrPlcrCtrlOvrLvlMBS 1.3.6.1.4.1.6527.3.1.2.4.3.91.1.2
The value of sapEgrPlcrCtrlOvrLvlMBS specifies the maximum amount of cumulative buffer space (in bytes) allowed for this level by the policer of this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytesOverride  

sapEgrPlcrOvrTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.94
sapEgrPlcrOvrTblLastChgd indicates the timestamp of last change to the sapEgrPlcrOvrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrPlcrOvrTable 1.3.6.1.4.1.6527.3.1.2.4.3.95
A table that contains SAP egress policer control override information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrPlcrOvrEntry

sapEgrPlcrOvrEntry 1.3.6.1.4.1.6527.3.1.2.4.3.95.1
Policer control override information about a specific policer of the SAP on the egress side.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrPlcrOvrEntry  

sapEgrPlcrOvrRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.1
This is the Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapEgrPlcrOvrLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.2
The value of sapEgrPlcrOvrLastChgd indicates the timestamp of last change to this row in sapEgrPlcrOvrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrPlcrOvrAdminPIR 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.3
sapEgrPlcrOvrAdminPIR specifies the administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolPIRRateOverride  

sapEgrPlcrOvrAdminCIR 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.4
sapEgrPlcrOvrAdminCIR specifies the administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  THPolCIRRateOverride  

sapEgrPlcrOvrStatMode 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.5
sapEgrPlcrOvrStatMode specifies the mode of statistics collected by this policer on this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEgrPolicerStatModeOverride  

sapEgrPlcrOvrMBS 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.6
sapEgrPlcrOvrMBS specifies the maximum amount of buffer space (in bytes) allowed for the queue by this policer on this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytesOverride  

sapEgrPlcrOvrPktOffset 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.7
sapEgrPlcrOvrPktOffset specifies the packet byte offset for addition of policing information by this policer on this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TPerPacketOffsetOvr  

sapEgrPlcrOvrCBS 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.8
sapEgrPlcrOvrCBS specifies the amount of reserved buffer space (in bytes) for the queue set by this policer on this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TPlcrBurstSizeBytesOverride  

sapEgrPlcrOvrAdminPIRPercent 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.9
The value of sapEgrPlcrOvrAdminPIRPercent specifies the desired administrative PIR value for this policer as a percentage.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRPercentOverride  

sapEgrPlcrOvrAdminCIRPercent 1.3.6.1.4.1.6527.3.1.2.4.3.95.1.10
The value of sapEgrPlcrOvrAdminCIRPercent specifies the desired administrative CIR value for this policer as a percentage.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRPercentOverride  

sapIngQosPolicerStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.96
A table that contains ingress QoS policer SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosPolicerStatsEntry

sapIngQosPolicerStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.96.1
Ingress statistics about a specific SAP's QoS policer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosPolicerStatsEntry  

sapIngQosPStatsPolId 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.1
The index of the ingress QoS policer of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TIngPolicerId  

sapIngQosPStatsCustId 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.2
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIngQosPStatsMode 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.3
The value of sapIngQosPStatsMode indicates the stat mode used by the policer.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxIngPolicerStatMode  

sapIngQosPStatsOffHiPrioPkts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.4
The number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsOffHiPrioPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.5
Lower 32 bits of sapIngQosPStatsOffHiPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsOffHiPrioPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.6
Upper 32 bits of sapIngQosPStatsOffHiPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsDrpHiPrioPkts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.7
The number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsDrpHiPrioPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.8
Lower 32 bits of sapIngQosPStatsDrpHiPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsDrpHiPrioPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.9
Upper 32 bits of sapIngQosPStatsDrpHiPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsOffLoPrioPkts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.10
The number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsOffLoPrioPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.11
Lower 32 bits of sapIngQosPStatsOffLoPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsOffLoPrioPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.12
Upper 32 bits of sapIngQosPStatsOffLoPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsDrpLoPrioPkts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.13
The number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsDrpLoPrioPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.14
Lower 32 bits of sapIngQosPStatsDrpLoPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsDrpLoPrioPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.15
Upper 32 bits of sapIngQosPStatsDrpLoPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsOffHiPrioOcts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.16
The number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsOffHiPrioOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.17
Lower 32 bits of sapIngQosPStatsOffHiPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsOffHiPrioOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.18
Upper 32 bits of sapIngQosPStatsOffHiPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsDrpHiPrioOcts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.19
The number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsDrpHiPrioOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.20
Lower 32 bits of sapIngQosPStatsDrpHiPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsDrpHiPrioOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.21
Upper 32 bits of sapIngQosPStatsDrpHiPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsOffLoPrioOcts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.22
The number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsOffLoPrioOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.23
Lower 32 bits of sapIngQosPStatsOffLoPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsOffLoPrioOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.24
Upper 32 bits of sapIngQosPStatsOffLoPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsDrpLoPrioOcts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.25
The number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsDrpLoPrioOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.26
Lower 32 bits of sapIngQosPStatsDrpLoPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsDrpLoPrioOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.27
Upper 32 bits of sapIngQosPStatsDrpLoPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsFwdInProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.28
The number of in-profile packets (rate below CIR) forwarded by the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsFwdInProfPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.29
Lower 32 bits of sapIngQosPStatsFwdInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsFwdInProfPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.30
Upper 32 bits of sapIngQosPStatsFwdInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsFwdOutProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.31
The number of out-of-profile packets (rate above CIR) forwarded by the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsFwdOutProfPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.32
Lower 32 bits of sapIngQosPStatsFwdOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsFwdOutProfPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.33
Upper 32 bits of sapIngQosPStatsFwdOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsFwdInProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.34
The number of in-profile octets (rate below CIR) forwarded by the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsFwdInProfOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.35
Lower 32 bits of sapIngQosPStatsFwdInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsFwdInProfOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.36
Upper 32 bits of sapIngQosPStatsFwdInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsFwdOutProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.37
The number of out-of-profile octets (rate above CIR) forwarded by the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsFwdOutProfOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.38
Lower 32 bits of sapIngQosPStatsFwdOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsFwdOutProfOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.39
Upper 32 bits of sapIngQosPStatsFwdOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsUncolPktsOff 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.40
The number of uncolored packets offered to the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsUncolPktsOffLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.41
Lower 32 bits of sapIngQosPStatsUncolPktsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsUncolPktsOffHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.42
Upper 32 bits of sapIngQosPStatsUncolPktsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsUncolOctsOff 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.43
The number of uncolored octets offered to the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosPStatsUncolOctsOffLo 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.44
Lower 32 bits of sapIngQosPStatsUncolOctsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPStatsUncolOctsOffHi 1.3.6.1.4.1.6527.3.1.2.4.3.96.1.45
Upper 32 bits of sapIngQosPStatsUncolOctsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPolicerStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.97
A table that contains egress QoS policer SAP statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosPolicerStatsEntry

sapEgrQosPolicerStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.97.1
Egress statistics about a specific SAP's QoS policer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosPolicerStatsEntry  

sapEgrQosPStatsPolId 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.1
The index of the egress QoS queue of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgrPolicerId  

sapEgrQosPStatsCustId 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.2
The Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrQosPStatsMode 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.3
The value of sapEgrQosPStatsMode indicates the stat mode used by the policer.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEgrPolicerStatMode  

sapEgrQosPStatsOffInProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.4
The number of in-profile packets (rate below CIR) offered by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsOffInProfPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.5
Lower 32 bits of sapEgrQosPStatsOffInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsOffInProfPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.6
Upper 32 bits of sapEgrQosPStatsOffInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsFwdInProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.7
The number of in-profile packets (rate below CIR) forwarded by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsFwdInProfPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.8
Lower 32 bits of sapEgrQosPStatsFwdInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsFwdInProfPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.9
Upper 32 bits of sapEgrQosPStatsFwdInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsDrpInProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.10
The number of in-profile packets discarded by the egress Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsDrpInProfPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.11
Lower 32 bits of sapEgrQosPStatsDrpInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsDrpInProfPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.12
Upper 32 bits of sapEgrQosPStatsDrpInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsOffOutProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.13
The number of out-of-profile packets (rate above CIR) offered by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsOffOutProfPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.14
Lower 32 bits of sapEgrQosPStatsOffOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsOffOutProfPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.15
Upper 32 bits of sapEgrQosPStatsOffOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsFwdOutProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.16
The number of out-of-profile packets (rate above CIR) forwarded by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsFwdOutProfPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.17
Lower 32 bits of sapEgrQosPStatsFwdOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsFwdOutProfPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.18
Upper 32 bits of sapEgrQosPStatsFwdOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsDrpOutProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.19
The number of out-of-profile packets discarded by the egress Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsDrpOutProfPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.20
Lower 32 bits of sapEgrQosPStatsDrpOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsDrpOutProfPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.21
Upper 32 bits of sapEgrQosPStatsDrpOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsOffInProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.22
The number of in-profile octets (rate below CIR) offered by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsOffInProfOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.23
Lower 32 bits of sapEgrQosPStatsOffInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsOffInProfOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.24
Upper 32 bits of sapEgrQosPStatsOffInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsFwdInProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.25
The number of in-profile octets (rate below CIR) forwarded by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsFwdInProfOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.26
Lower 32 bits of sapEgrQosPStatsFwdInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsFwdInProfOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.27
Upper 32 bits of sapEgrQosPStatsFwdInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsDrpInProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.28
The number of in-profile octets discarded by the egress Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsDrpInProfOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.29
Lower 32 bits of sapEgrQosPStatsDrpInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsDrpInProfOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.30
Upper 32 bits of sapEgrQosPStatsDrpInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsOffOutProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.31
The number of out-of-profile octets (rate above CIR) forwarded by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsOffOutProfOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.32
Lower 32 bits of sapEgrQosPStatsOffOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsOffOutProfOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.33
Upper 32 bits of sapEgrQosPStatsOffOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsFwdOutProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.34
The number of out-of-profile octets (rate above CIR) forwarded by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsFwdOutProfOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.35
Lower 32 bits of sapEgrQosPStatsFwdOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsFwdOutProfOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.36
Upper 32 bits of sapEgrQosPStatsFwdOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsDrpOutProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.37
The number of out-of-profile octets discarded by the egress Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsDrpOutProfOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.38
Lower 32 bits of sapEgrQosPStatsDrpOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsDrpOutProfOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.39
Upper 32 bits of sapEgrQosPStatsDrpOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsUncolPktsOff 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.40
The number of uncolored packets forwarded by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsUncolPktsOffLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.41
Lower 32 bits of sapIngQosPStatsUncolPktsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsUncolPktsOffHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.42
Upper 32 bits of sapIngQosPStatsUncolPktsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsUncolOctsOff 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.43
The number of uncolored octets forwarded by the egress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosPStatsUncolOctsOffLo 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.44
Lower 32 bits of sapIngQosPStatsUncolOctsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPStatsUncolOctsOffHi 1.3.6.1.4.1.6527.3.1.2.4.3.97.1.45
Upper 32 bits of sapIngQosPStatsUncolOctsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosPlcyPolicerStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.98
A table that contains ingress QoS policer SAP statistics, per Ingress QoS Policy the policer was used by.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosPlcyPolicerStatsEntry

sapIngQosPlcyPolicerStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.98.1
Ingress statistics about a specific SAP's QoS policer for a given Qos policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosPlcyPolicerStatsEntry  

sapIgQosPlcyPStatPlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.1
The row index in the tSapIngressTable corresponding to this ingress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressPolicyID  

sapIgQosPlcyPStatPolId 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.2
The index of the ingress QoS policer of this SAP used by the policy indicated by sapIgQosPlcyPStatPlcyId.
Status: current Access: not-accessible
OBJECT-TYPE    
  TIngPolicerId  

sapIgQosPlcyPStatCustId 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.3
The value of the object sapIgQosPlcyPStatCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapIgQosPlcyPStatMode 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.4
The value of sapIgQosPlcyPStatMode indicates the stat mode used by the policer.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxIngPolicerStatMode  

sapIgQosPlcyPStatOffHiPrioPkts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.5
The value of sapIgQosPlcyPStatOffHiPrioPkts indicates the number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatOffHiPrioPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.6
Lower 32 bits of sapIgQosPlcyPStatOffHiPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatOffHiPrioPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.7
Upper 32 bits of sapIgQosPlcyPStatOffHiPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatDrpHiPrioPkts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.8
The value of sapIgQosPlcyPStatDrpHiPrioPkts indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatDrpHiPrioPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.9
Lower 32 bits of sapIgQosPlcyPStatDrpHiPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatDrpHiPrioPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.10
Upper 32 bits of sapIgQosPlcyPStatDrpHiPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatOffLoPrioPkts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.11
The value of sapIgQosPlcyPStatOffLoPrioPkts indicates the number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatOffLoPrioPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.12
Lower 32 bits of sapIgQosPlcyPStatOffLoPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatOffLoPrioPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.13
Upper 32 bits of sapIgQosPlcyPStatOffLoPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatDrpLoPrioPkts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.14
The value of sapIgQosPlcyPStatDrpLoPrioPkts indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatDrpLoPrioPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.15
Lower 32 bits of sapIgQosPlcyPStatDrpLoPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatDrpLoPrioPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.16
Upper 32 bits of sapIgQosPlcyPStatDrpLoPrioPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatOffHiPrioOcts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.17
The value of sapIgQosPlcyPStatOffHiPrioOcts indicates the number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatOffHiPrioOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.18
Lower 32 bits of sapIgQosPlcyPStatOffHiPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatOffHiPrioOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.19
Upper 32 bits of sapIgQosPlcyPStatOffHiPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatDrpHiPrioOcts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.20
The value of sapIgQosPlcyPStatDrpHiPrioOcts indicates the number ofhigh priority octets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatDrpHiPrioOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.21
Lower 32 bits of sapIgQosPlcyPStatDrpHiPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatDrpHiPrioOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.22
Upper 32 bits of sapIgQosPlcyPStatDrpHiPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatOffLoPrioOcts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.23
The value of sapIgQosPlcyPStatOffLoPrioOcts indicates the number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatOffLoPrioOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.24
Lower 32 bits of sapIgQosPlcyPStatOffLoPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatOffLoPrioOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.25
Upper 32 bits of sapIgQosPlcyPStatOffLoPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatDrpLoPrioOcts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.26
The value of sapIgQosPlcyPStatDrpLoPrioOcts indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatDrpLoPrioOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.27
Lower 32 bits of sapIgQosPlcyPStatDrpLoPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatDrpLoPrioOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.28
Upper 32 bits of sapIgQosPlcyPStatDrpLoPrioOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatFwdInProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.29
The value of sapIgQosPlcyPStatFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatFwdInProfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.30
Lower 32 bits of sapIgQosPlcyPStatFwdInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatFwdInProfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.31
Upper 32 bits of sapIgQosPlcyPStatFwdInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatFwdOutProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.32
The value of sapIgQosPlcyPStatFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatFwdOutProfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.33
Lower 32 bits of sapIgQosPlcyPStatFwdOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatFwdOutProfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.34
Upper 32 bits of sapIgQosPlcyPStatFwdOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatFwdInProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.35
The value of sapIgQosPlcyPStatFwdInProfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatFwdInProfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.36
Lower 32 bits of sapIgQosPlcyPStatFwdInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatFwdInProfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.37
Upper 32 bits of sapIgQosPlcyPStatFwdInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatFwdOutProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.38
The value of sapIgQosPlcyPStatFwdOutProfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatFwdOutProfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.39
Lower 32 bits of sapIgQosPlcyPStatFwdOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatFwdOutProfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.40
Upper 32 bits of sapIgQosPlcyPStatFwdOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatUncolPktsOff 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.41
The value of sapIgQosPlcyPStatUncolPktsOff indicates the number of uncolored packets offered to the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatUncolPktsOffL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.42
Lower 32 bits of sapIgQosPlcyPStatUncolPktsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatUncolPktsOffH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.43
Upper 32 bits of sapIgQosPlcyPStatUncolPktsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatUncolOctsOff 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.44
The value of sapIgQosPlcyPStatUncolOctsOff indicates the number of uncolored octets offered to the ingress Pchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIgQosPlcyPStatUncolOctsOffL 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.45
Lower 32 bits of sapIgQosPlcyPStatUncolOctsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIgQosPlcyPStatUncolOctsOffH 1.3.6.1.4.1.6527.3.1.2.4.3.98.1.46
Upper 32 bits of sapIgQosPlcyPStatUncolOctsOff.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosPlcyPolicerStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.99
A table that contains egress QoS policer SAP statistics per Egress QoS Policy the policer was used by.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosPlcyPolicerStatsEntry

sapEgrQosPlcyPolicerStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.99.1
Egress statistics about a specific SAP's QoS policer for a given Qos policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosPlcyPolicerStatsEntry  

sapEgQosPlcyPStatPlcyId 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.1
The row index in the tSapEgressTable corresponding to this egress QoS policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressPolicyID  

sapEgQosPlcyPStatPolId 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.2
The index of the egress QoS policer of this SAP used by the policy indicated by sapEgQosPlcyPStatPlcyId.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgrPolicerId  

sapEgQosPlcyPStatCustId 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.3
The value of the object sapEgQosPlcyPStatCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgQosPlcyPStatMode 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.4
The value of sapEgQosPlcyPStatMode indicates the stat mode used by the policer.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEgrPolicerStatMode  

sapEgQosPlcyPStatOffInProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.5
The value of sapEgQosPlcyPStatOffInProfPkts indicates the number of in-profile packets (rate below CIR) offered by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatOffInProfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.6
Lower 32 bits of sapEgQosPlcyPStatOffInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatOffInProfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.7
Upper 32 bits of sapEgQosPlcyPStatOffInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatFwdInProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.8
The value of sapEgQosPlcyPStatFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatFwdInProfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.9
Lower 32 bits of sapEgQosPlcyPStatFwdInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatFwdInProfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.10
Upper 32 bits of sapEgQosPlcyPStatFwdInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatDrpInProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.11
The value of sapEgQosPlcyPStatDrpInProfPkts indicates the number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatDrpInProfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.12
Lower 32 bits of sapEgQosPlcyPStatDrpInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatDrpInProfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.13
Upper 32 bits of sapEgQosPlcyPStatDrpInProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatOffOutProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.14
The value of sapEgQosPlcyPStatOffOutProfPkts indicates the number of out-of-profile packets (rate above CIR) offered by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatOffOutProfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.15
Lower 32 bits of sapEgQosPlcyPStatOffOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatOffOutProfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.16
Upper 32 bits of sapEgQosPlcyPStatOffOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatFwdOutProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.17
The value of sapEgQosPlcyPStatFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatFwdOutProfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.18
Lower 32 bits of sapEgQosPlcyPStatFwdOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatFwdOutProfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.19
Upper 32 bits of sapEgQosPlcyPStatFwdOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatDrpOutProfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.20
The value of sapEgQosPlcyPStatDrpOutProfPkts indicates the number out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatDrpOutProfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.21
Lower 32 bits of sapEgQosPlcyPStatDrpOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatDrpOutProfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.22
Upper 32 bits of sapEgQosPlcyPStatDrpOutProfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatOffInProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.23
The value of sapEgQosPlcyPStatOffInProfOcts indicates the number ofin-profile octets (rate below CIR) offered by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatOffInProfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.24
Lower 32 bits of sapEgQosPlcyPStatOffInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatOffInProfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.25
Upper 32 bits of sapEgQosPlcyPStatOffInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatFwdInProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.26
The value of sapEgQosPlcyPStatFwdInProfOcts indicates the number ofin-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatFwdInProfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.27
Lower 32 bits of sapEgQosPlcyPStatFwdInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatFwdInProfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.28
Upper 32 bits of sapEgQosPlcyPStatFwdInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatDrpInProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.29
The value of sapEgQosPlcyPStatDrpInProfOcts indicates the number in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatDrpInProfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.30
Lower 32 bits of sapEgQosPlcyPStatDrpInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatDrpInProfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.31
Upper 32 bits of sapEgQosPlcyPStatDrpInProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatOffOutProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.32
The value of sapEgQosPlcyPStatOffOutProfOcts indicates the number of out-of-profile octets (rate above CIR) offered by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatOffOutProfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.33
Lower 32 bits of sapEgQosPlcyPStatOffOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatOffOutProfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.34
Upper 32 bits of sapEgQosPlcyPStatOffOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatFwdOutProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.35
The value of sapEgQosPlcyPStatFwdOutProfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatFwdOutProfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.36
Lower 32 bits of sapEgQosPlcyPStatFwdOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatFwdOutProfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.37
Upper 32 bits of sapEgQosPlcyPStatFwdOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatDrpOutProfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.38
The value of sapEgQosPlcyPStatDrpOutProfOcts indicates the number out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgQosPlcyPStatDrpOutProfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.39
Lower 32 bits of sapEgQosPlcyPStatDrpOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgQosPlcyPStatDrpOutProfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.99.1.40
Upper 32 bits of sapEgQosPlcyPStatDrpOutProfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTmplTblLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.101
The value of sapTmplTblLastChanged indicates the sysUpTime at the time of the last modification of sapTmplTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTmplTable 1.3.6.1.4.1.6527.3.1.2.4.3.102
A table that contains basic SAP template information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTmplEntry

sapTmplEntry 1.3.6.1.4.1.6527.3.1.2.4.3.102.1
Basic information about a specific SAP template.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTmplEntry  

sapTmplName 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.1
The value of the object sapTmplName specifies the SAP template name. This name should be unique within the SAP template domain.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapTmplRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.2
This value of the object sapTmplRowStatus specifies the status of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapTmplLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.3
The value of sapTmplLastChanged indicates the timestamp of last change to this row in sapTmplTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTmplSapCount 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.4
The value of sapTmplSapCount indicates the number of instantiated SAPs created using this template.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapTmplType 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.5
This object indicates the type of service where this SAP is defined. An 'inconsistentValue' error is returned if an attempt is made to change the value of this object after row creation.
Status: current Access: read-create
OBJECT-TYPE    
  ServType  

sapTmplIngressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.6
The value of the object sapTmplIngressQosPolicyId specifies the row index in the tSapIngressTable corresponding to this ingress QoS policy, or one if no policy is specified. The value 0 is needed for mirror SAPs that cannot have a QoS policy assigned.
Status: current Access: read-create
OBJECT-TYPE    
  TTmplPolicyID  

sapTmplIngressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.7
The value of the object sapTmplIngressMacFilterId specifies the row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapTmplIngressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.8
The value of the object sapTmplIngressIpFilterId specifies the row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapTmplEgressQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.9
The row index in the tSapEgressTable corresponding to this egress QoS policy, or one if no policy is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TTmplPolicyID  

sapTmplEgressMacFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.10
The row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapTmplEgressIpFilterId 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.11
The row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapTmplCollectAcctStats 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.12
When the value of this object is 'true' the agent collects accounting statistics on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapTmplIngressQosSchedulerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.13
The value of sapTmplIngressQosSchedulerPolicy indicates the ingress QoS scheduler for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapTmplEgressQosSchedulerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.14
The value of sapTmplEgressQosSchedulerPolicy indicates the egress QoS scheduler for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapTmplIngressSharedQueuePolicy 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.15
This object indicates the ingress shared queue policy used by this SAP. When the value of this object is null it means that the SAP will use individual ingress QoS queues, instead of the shared ones.
Status: current Access: read-create
OBJECT-TYPE    
  ServObjName  

sapTmplIngressMatchQinQDot1PBits 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.16
This object applies only to SAP's defined on a port configured for qinq service encapsulation. It indicates which 802.1P bits will be used to match a QoS or a MAC filter policy when a double-tagged frame is received on this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER default(1), top(2), bottom(3)  

sapTmplIngressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.17
The value of the object sapTmplIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapTmplEgressIpv6FilterId 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.18
The value of the object sapTmplEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified.
Status: current Access: read-create
OBJECT-TYPE    
  TFilterID  

sapTmplIngUseMultipointShared 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.19
When the value of sapIngressSharedQueuePolicy is not null, the value of the object sapTmplIngUseMultipointShared specifies whether this SAP uses the multipoint-shared queues of the shared policy.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapTmplEgressQinQMarkTopOnly 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.20
When the encapsulation type of the access port where this SAP is defined is qinq, the value of the object sapTmplEgressQinQMarkTopOnly specifies which P-bits to mark during packet egress. When the value is false both set of P-bits are marked. When the value is true, only the P-bits in the top Q-tag are marked.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapTmplEgressAggRateLimit 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.21
The value of the object sapTmplEgressAggRateLimit specifies the maximum total rate of all egress queues for this SAP. The value '-1' means that there is no limit.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

sapTmplEgressFrameBasedAcctg 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.22
The value of sapTmplEgressFrameBasedAcctg specifies whether to use frame-based accounting when evaluating sapTmplEgressAggRateLimit for all egress queues for this SAP. If the value is 'false', the default packet-based accounting method will be used.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapTmplIngressAggRateLimit 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.23
The value of the object sapTmplIngressAggRateLimit specifies the maximum total rate of all ingress queues for this SAP. The value '-1' means that there is no limit. This object is obsoleted in 10.0 Release.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

sapTmplIngPolicerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.24
The value of sapTmplIngPolicerPolicy specifies the ingress policer control policy applicable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTmplEgrPolicerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.25
The value of sapTmplEgrPolicerPolicy specifies the egress policer control policy applicable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapTmplDot1agCfmMip 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.26
The value of sapTmplDot1agCfmMip specifies whether Maintance Intermediate Points (MIP) will be created.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapTmplCpmProtPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.27
The value of sapTmplCpmProtPolicyId associates a CPM Protection policy with a SAP. A value of '-1' specifies that the system will determine the CPM Protection policy for this SAP.
Status: current Access: read-create
OBJECT-TYPE    
  TCpmProtPolicyIDOrDefault  

sapTmplCpmProtMonitorMac 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.28
The value of sapTmplCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy must be applied. If the value of sapTmplCpmProtMonitorMac is 'true', the per-source rate limit must be applied. The sapTmplCpmProtMonitorMac will be ignored if the system derived CPM Protection Policy from sapTmplCpmProtPolicyId is set to 'zero' for the instantiated SAP. At most one of sapTmplCpmProtMonitorMac and the sapTmplCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)' can be enabled for this template.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapTmplCpmProtEthCfmMonitorFlags 1.3.6.1.4.1.6527.3.1.2.4.3.102.1.29
The value of sapTmplCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by a SAP created using this template. Two associated options are also specified. Five combinations of flag values are supported, as shown in the following table. Flag Value (0=Disabled, 1=Enabled) ------------------------------------- ----------------------------- 'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1 'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1 'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1 ------------------------------------- ----------------------------- Supported Combination? Y N N N Y Y Y Y If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on the SAP. If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on the SAP. Excess packets are discarded. The configured information used to perform the Eth-CFM rate limiting (e.g. the rate limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the template's sapTmplCpmProtPolicyId. At most one of 'ethCfmMonitor(0)' and sapTmplCpmProtMonitorMac can be enabled for this template. The flags 'ethCfmMonitorAggregate(1)' and 'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM rate limiting. Therefore, they are only significant if Eth-CFM rate limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled. If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer (i.e. on a source MAC address basis). For example, if the SAP's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by the SAP, then 100 Eth-CFM packets/sec from each peer is within the limit. If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the aggregated traffic flow. For example, if the SAP's rate limit for all Eth-CFM packets is 100 packets/sec, and two peers are served by this SAP, then the combined rate of the two peers cannot exceed 100 packets/sec. 'ethCfmMonitorCommittedAccessRate(2)' controls the interaction between two features: Eth-CFM rate limiting, and overall rate limiting (as configured using tmnxCpmProtPolOverallRateLimit). If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM packet is subjected to two rate limits, in the following order. a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as described above. If the packet exceeds the limit, it is discarded. Otherwise... b) The SAP's tmnxCpmProtPolOverallRateLimit (which is applied to Eth-CFM packets, and the other rate limited packet types) is applied. If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet is subjected to one rate limit: the applicable tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets are neither counted nor discarded when performing the tmnxCpmProtPolOverallRateLimit rate limiting.
Status: current Access: read-create
OBJECT-TYPE    
  BITS ethCfmMonitor(0), ethCfmMonitorAggregate(1), ethCfmMonitorCommittedAccessRate(2)  

sapTmplTlsTblLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.103
The value of sapTmplTlsTblLastChanged indicates the sysUpTime at the time of the last modification of sapTmplTlsTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTmplTlsTable 1.3.6.1.4.1.6527.3.1.2.4.3.104
A table that contains VPLS SAP template information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTmplTlsEntry

sapTmplTlsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.104.1
This table contains basic information about a specific VPLS SAP template. An entry in this table is created when an entry is created in the sapTmplTable with sapTmplType set to 'tls'. Entry is deleted when corresponding entry is deleted in sapTmplTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTmplTlsEntry  

sapTmplTlsLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.1
The value of sapTmplTlsLastChanged indicates the timestamp of last change to this row in sapTmplTlsTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTmplTlsMacAgeing 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.2
The value of the object sapTmplTlsMacAgeing specifies whether the MAC aging process is enabled for this SAP template. The value will be ignored if MAC aging is disabled on service level.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTmplTlsStpAdminStatus 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.3
The value of the object sapTmplTlsStpAdminStatus specifies whether this SAP participates in the TLS's Spanning Tree Protocol.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTmplTlsStpPriority 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.4
The value of the object sapTmplTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

sapTmplTlsStpPathCost 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.5
The value of the object sapTmplTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200000000  

sapTmplTlsStpRapidStart 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.6
The value of the object sapTmplTlsStpRapidStart specifies whether Rapid Start is enabled on this SAP. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SAP are driven by the value of the 'HelloTime' instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state. This parameter is also referred to as 'adminEdge'.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTmplTlsStpBpduEncap 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.7
The value of the object sapTmplTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SAP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dynamic(1), dot1d(2), pvst(3)  

sapTmplTlsMacAddressLimit 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.8
The value of the object sapTmplTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB of this SAP. The value 0 means: no limit for this SAP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..511999  

sapTmplTlsMacLearning 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.9
The value of the object sapTmplTlsMacLearning specifies whether the MAC learning process is enabled for this SAP. The value is ignored if MAC learning is disabled on service level.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTmplTlsStpAdminPointToPoint 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.10
The value of the object sapTmplTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sap. The value 'forceTrue' means that this port should always be treated as if it is connected to a point-to-point link. The value of 'forceFalse' means that this port should be treated as having a shared media connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forceTrue(0), forceFalse(1)  

sapTmplTlsStpAutoEdge 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.11
sapTmplTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTmplTlsDiscardUnknownSource 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.12
with the object sapTmplTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SAP. When this limit is reached, packets with unknown source MAC address are forwarded by default. By setting sapTmplTlsDiscardUnknownSource to enabled, packets with unknown source MAC will be dropped in stead.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTmplTlsL2ptTermination 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.13
The value of the object sapTmplTlsL2ptTermination specifies whether received Layer 2 Protocol Tunnel (L2PT) pdu's are terminated on this port or sap.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxEnabledDisabled  

sapTmplTlsBpduTranslation 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.14
The value of the object sapTmplTlsBpduTranslation specifies whether received L2 Protocol Tunnel pdu's are translated before being sent out on this port or sap.
Status: current Access: read-write
OBJECT-TYPE    
  TlsBpduTranslation  

sapTmplTlsStpRootGuard 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.15
The value of the object sapTmplTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

sapTmplTlsL2ptProtocols 4.1.3.6.1.4.1.6527.3.1.2.4.3.104.1.16
The value of the object sapTmplTlsL2ptTermination specifies which L2 Protocol Tunnel pdu's are terminated on this port or sap.
Status: current Access: read-write
OBJECT-TYPE    
  L2ptProtocols  

sapTmplTlsLimitMacMove 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.17
When sapTmplTlsLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on this SAP, and it will block it when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' this SAP will not be blocked, and another blockable SAP will be blocked instead.
Status: current Access: read-write
OBJECT-TYPE    
  TlsLimitMacMove  

sapTmplTlsLimitMacMoveLevel 1.3.6.1.4.1.6527.3.1.2.4.3.104.1.18
The value of the object sapTmplTlsLimitMacMoveLevel specifies the hierarchy in which SAPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first. (tertiary is the lowest)
Status: current Access: read-write
OBJECT-TYPE    
  TlsLimitMacMoveLevel  

sapTlsEsVidGrpTblLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.105
The value of sapTlsEsVidGrpTblLastChanged indicates the sysUpTime at the time of the last modification of sapTlsEsVidGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsEsVidGrpTable 1.3.6.1.4.1.6527.3.1.2.4.3.106
A table that contains TLS SAP specific Mutliple VLAN Registration Protocol (MVRP) end-station VLAN range group information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsEsVidGrpEntry

sapTlsEsVidGrpEntry 1.3.6.1.4.1.6527.3.1.2.4.3.106.1
A table that contains TLS SAP specific MVRP end-station VLAN range group information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsEsVidGrpEntry  

sapTlsEsVidGrpId 1.3.6.1.4.1.6527.3.1.2.4.3.106.1.1
The value of the object sapTlsEsVidGrpId specifies the MVRP end-station VLAN range group identfier. This identifiter should be unique within this SAP domain.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxVlanGroupId  

sapTlsEsVidGrpRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.106.1.2
This value of the object sapTlsEsVidGrpRowStatus specifies the status of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapTlsEsVidGrpLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.106.1.3
The value of sapTlsEsVidGrpLastChgd indicates the timestamp of last change to this row in sapTlsEsVidGrpTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsEsVidGrpStartVlanTag 1.3.6.1.4.1.6527.3.1.2.4.3.106.1.4
The value of the object sapTlsEsVidGrpStartVlanTag specifies the start of the VLAN tag range. An 'inconsistentValue' error is returned if value of this object is not specified at the time of row-creation.
Status: current Access: read-create
OBJECT-TYPE    
  QTag  

sapTlsEsVidGrpEndVlanTag 1.3.6.1.4.1.6527.3.1.2.4.3.106.1.5
The value of the object sapTlsEsVidGrpEndVlanTag specifies the end of the VLAN tag range. An 'inconsistentValue' error is returned if value of this object is not specified at the time of row-creation.
Status: current Access: read-create
OBJECT-TYPE    
  QTag  

sapTmplUserTable 1.3.6.1.4.1.6527.3.1.2.4.3.107
A table that contains SAPs which are created using SAP templates.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTmplUserEntry

sapTmplUserEntry 1.3.6.1.4.1.6527.3.1.2.4.3.107.1
This table provides information about SAP created using a SAP template. Entries are created and deleted by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTmplUserEntry  

sapTmplUserCreationOrigin 1.3.6.1.4.1.6527.3.1.2.4.3.107.1.1
The value sapTmplUserCreationOrigin indicates how this SAP was created using this specific SAP template.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mVpls(1)  

sapTmplUserCreatorSvcId 1.3.6.1.4.1.6527.3.1.2.4.3.107.1.2
The value sapTmplUserCreatorSvcId indicates the service identifier which created this particular SAP using this template. A value of zero indicates that the SAP is not created by a service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxServId  

sapIngQosArbitStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.108
The sapIngQosArbitStatsTable contains ingress QoS arbiter statistics about SAPs. In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS series Packet Processing chip, while 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapIngQosArbitStatsEntry

sapIngQosArbitStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.108.1
Each row entry contains ingress statistics about a particular SAP QoS arbiter.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapIngQosArbitStatsEntry  

sapIngQosArbitStatsName 1.3.6.1.4.1.6527.3.1.2.4.3.108.1.1
The value of sapIngQosArbitStatsName specifies the ingress QoS arbiter of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapIngQosArbitStatsFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.108.1.2
The value of sapIngQosArbitStatsFwdPkts indicates the number of forwarded packets, as determined by the SAP ingress policer control policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosArbitStatsFwdPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.108.1.3
The value of sapIngQosArbitStatsFwdPktsLo indicates the lower 32 bits of sapIngQosArbitStatsFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosArbitStatsFwdPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.108.1.4
The value of sapIngQosArbitStatsFwdPktsHi indicates the upper 32 bits of sapIngQosArbitStatsFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosArbitStatsFwdOcts 1.3.6.1.4.1.6527.3.1.2.4.3.108.1.5
The value of sapIngQosArbitStatsFwdOcts indicates the number of forwarded octets, as determined by the SAP ingress policer control policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapIngQosArbitStatsFwdOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.108.1.6
The value of sapIngQosArbitStatsFwdOctsLo indicates the lower 32 bits of sapIngQosArbitStatsFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapIngQosArbitStatsFwdOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.108.1.7
The value of sapIngQosArbitStatsFwdOctsHi indicates the upper 32 bits of sapIngQosArbitStatsFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosArbitStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.109
The sapEgrQosArbitStatsTable contains egress QoS arbiter statistics about SAPs. In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS series Packet Processing chip, while 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrQosArbitStatsEntry

sapEgrQosArbitStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.109.1
Each row entry contains egress statistics about a particular SAP QoS arbiter.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrQosArbitStatsEntry  

sapEgrQosArbitStatsName 1.3.6.1.4.1.6527.3.1.2.4.3.109.1.1
The value of sapEgrQosArbitStatsName specifies the egress QoS arbiter of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapEgrQosArbitStatsFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.109.1.2
The value of sapEgrQosArbitStatsFwdPkts indicates the number of forwarded packets, as determined by the SAP egress policer control policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosArbitStatsFwdPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.109.1.3
The value of sapEgrQosArbitStatsFwdPktsLo indicates the lower 32 bits of sapEgrQosArbitStatsFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosArbitStatsFwdPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.109.1.4
The value of sapEgrQosArbitStatsFwdPktsHi indicates the upper 32 bits of sapEgrQosArbitStatsFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosArbitStatsFwdOcts 1.3.6.1.4.1.6527.3.1.2.4.3.109.1.5
The value of sapEgrQosArbitStatsFwdOcts indicates the number of forwarded octets, as determined by the SAP egress policer control policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrQosArbitStatsFwdOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.109.1.6
The value of sapEgrQosArbitStatsFwdOctsLo indicates the lower 32 bits of sapEgrQosArbitStatsFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrQosArbitStatsFwdOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.109.1.7
The value of sapEgrQosArbitStatsFwdOctsHi indicates the upper 32 bits of sapEgrQosArbitStatsFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdIngQosArbitStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.111
The sapPortIdIngQosArbitStatsTable contains ingress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapPortIdIngQosArbitStatsEntry

sapPortIdIngQosArbitStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.111.1
Each entry represents the ingress statistics about a specific SAP's QoS queue. Entries are created when a arbiter policy is applied to a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapPortIdIngQosArbitStatsEntry  

sapPortIdIngQosArbitName 1.3.6.1.4.1.6527.3.1.2.4.3.111.1.1
The value of sapPortIdIngQosArbitName is used as an index of the ingress QoS arbiter of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapPortIdIngQosArbitFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.111.1.2
The value of sapPortIdIngQosArbitFwdPkts indicates the number of forwarded packets, as determined by the SAP ingress arbiter policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdIngQosArbitFwdOcts 1.3.6.1.4.1.6527.3.1.2.4.3.111.1.3
The value of sapPortIdIngQosArbitFwdOcts indicates the number of forwarded octets,as determined by the SAP ingress arbiter policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdIngQosArbitFwdPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.111.1.4
The value of sapPortIdIngQosArbitFwdPktsLo indicates the lower 32 bits of sapPortIdIngQosArbitFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdIngQosArbitFwdPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.111.1.5
The value of sapPortIdIngQosArbitFwdPktsHi indicates the upper 32 bits of sapPortIdIngQosArbitFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdIngQosArbitFwdOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.111.1.6
The value of sapPortIdIngQosArbitFwdOctsLo indicates the lower 32 bits of sapPortIdIngQosArbitFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdIngQosArbitFwdOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.111.1.7
The value of sapPortIdIngQosArbitFwdOctsHi indicates the upper 32 bits of sapPortIdIngQosArbitFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrQosArbitStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.112
The sapPortIdEgrQosArbitStatsTable contains egress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapPortIdEgrQosArbitStatsEntry

sapPortIdEgrQosArbitStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.112.1
Each entry represents the egress statistics about a specific SAP's QoS queue. Entries are created when a arbiter policy is applied to a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapPortIdEgrQosArbitStatsEntry  

sapPortIdEgrQosArbitName 1.3.6.1.4.1.6527.3.1.2.4.3.112.1.1
The value of sapPortIdEgrQosArbitName is used as an index of the egress QoS arbiter of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapPortIdEgrQosArbitFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.112.1.2
The value of sapPortIdEgrQosArbitFwdPkts indicates the number of forwarded packets, as determined by the SAP egress arbiter policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrQosArbitFwdOcts 1.3.6.1.4.1.6527.3.1.2.4.3.112.1.3
The value of sapPortIdEgrQosArbitFwdOcts indicates the number of forwarded octets,as determined by the SAP egress arbiter policy, offered by the Pchip to the Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrQosArbitFwdPktsLo 1.3.6.1.4.1.6527.3.1.2.4.3.112.1.4
The value of sapPortIdEgrQosArbitFwdPktsLo indicates the lower 32 bits of sapPortIdEgrQosArbitFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrQosArbitFwdPktsHi 1.3.6.1.4.1.6527.3.1.2.4.3.112.1.5
The value of sapPortIdEgrQosArbitFwdPktsHi indicates the upper 32 bits of sapPortIdEgrQosArbitFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrQosArbitFwdOctsLo 1.3.6.1.4.1.6527.3.1.2.4.3.112.1.6
The value of sapPortIdEgrQosArbitFwdOctsLo indicates the lower 32 bits of sapPortIdEgrQosArbitFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrQosArbitFwdOctsHi 1.3.6.1.4.1.6527.3.1.2.4.3.112.1.7
The value of sapPortIdEgrQosArbitFwdOctsHi indicates the upper 32 bits of sapPortIdEgrQosArbitFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapTlsSpbTblLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.139
The value of sapTlsSpbTblLastChanged indicates the sysUpTime at the time of the last modification of sapTlsSpbTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsSpbTable 1.3.6.1.4.1.6527.3.1.2.4.3.140
A table that contains TLS SAP specific Shortest Path Bridging (SPB) information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsSpbEntry

sapTlsSpbEntry 1.3.6.1.4.1.6527.3.1.2.4.3.140.1
A row-entry that contains TLS SAP specific SPB information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsSpbEntry  

sapTlsSpbRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.140.1.1
This value of the object sapTlsSpbRowStatus specifies the status of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapTlsSpbLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.140.1.2
The value of sapTlsSpbLastChgd indicates the timestamp of last change to this row in sapTlsSpbTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapTlsSpbIfIndex 1.3.6.1.4.1.6527.3.1.2.4.3.140.1.3
The value of sapTlsSpbIfIndex indicates the interface index assigned to this SAP for Shortest Path Bridging.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

sapTlsSpbAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.140.1.4
The sapTlsSpbAdminState indicates the desired administrative state for Shortest Path Bridging on this sap.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

sapNotifyPortId 1.3.6.1.4.1.6527.3.1.2.4.3.100.1
The ID of the access port where a SAP is defined.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxPortID  

msapStatus 1.3.6.1.4.1.6527.3.1.2.4.3.100.2
The status of the Managed SAP which is used by the msapStateChanged notification to indicate what state the Managed SAP has entered: 'created', 'modified', or 'deleted'.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  ConfigStatus  

svcManagedSapCreationError 1.3.6.1.4.1.6527.3.1.2.4.3.100.3
The value of the object svcManagedSapCreationError indicates the reason why the system was unable to create the managed SAP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

sapTlsNotifyMacAddr 1.3.6.1.4.1.6527.3.1.2.4.3.100.4
The value of the object sapTlsNotifyMacAddr indicates the MAC address associated with a VPLS SAP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

sapBGPPeeringHostIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.100.5
The value of sapBGPPeeringHostIpAddrType indicates the address type of sapBGPPeeringHostIpAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

sapBGPPeeringHostIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.100.6
The value of sapBGPPeeringHostIpAddr indicates the IP address of the host.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4)  

sapBGPPeeringNotifDescription 1.3.6.1.4.1.6527.3.1.2.4.3.100.7
The object sapBGPPeeringNotifDescription is a printable character string.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

sapBGPPeeringAttrDiscarded 1.3.6.1.4.1.6527.3.1.2.4.3.100.8
The value of the object sapBGPPeeringAttrDiscarded is equal to 'true' if the BGP Peering attributes have been discarded.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

sapBGPPeeringVRtrID 1.3.6.1.4.1.6527.3.1.2.4.3.100.9
The unique value that identifies a virtual router.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxVRtrID  

sapTunnelNotifyName 1.3.6.1.4.1.6527.3.1.2.4.3.100.10
The value of sapTunnelNotifyName specifies the name of the IPsec or GRE tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TNamedItem  

sapTunnelNotifyReason 1.3.6.1.4.1.6527.3.1.2.4.3.100.11
The value of sapTunnelNotifyReason indicates the reason for the tunnel notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

sapTunnelNotifyState 1.3.6.1.4.1.6527.3.1.2.4.3.100.12
The value of sapTunnelNotifyState indicates the operational state of the tunnel in the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  ServiceOperStatus  

sapNotifyReason 1.3.6.1.4.1.6527.3.1.2.4.3.100.13
The value of sapNotifyReason indicates the reason for the SAP notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

sapNotifyName 1.3.6.1.4.1.6527.3.1.2.4.3.100.14
The value of sapNotifyName specifies a name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TNamedItem  

sapPppNcpFailureProtocol 1.3.6.1.4.1.6527.3.1.2.4.3.100.15
The value of sapPppNcpFailureProtocol indicates the failing NCP protocol.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER ipcp(1), ipv6cp(2)  

sapIpipeCeIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.100.16
The value of sapIpipeCeIpAddrType indicates the type of CE IP address on an IPIPE SAP. The CE IP address is specified by sapIpipeCeIpAddress.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

sapIpipeCeIpAddress 1.3.6.1.4.1.6527.3.1.2.4.3.100.17
The value of sapIpipeCeIpAddress indicates the CE IP address of type sapIpipeCeIpAddrType on an IPIPE SAP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

sapNotifyEncapValue 1.3.6.1.4.1.6527.3.1.2.4.3.100.18
The value of the label used to identify this SAP on the access port specified by sapNotifyPortId.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxEncapVal  

sapTlsMvrpTable 1.3.6.1.4.1.6527.3.1.2.4.3.110
This table contains an entry for each VLAN managed by Multiple VLAN Registration Protocol (MVRP) on the SAP for the TLS. Entries are dynamically created and destroyed by the system as the VLANs are registered or declared in MVRP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapTlsMvrpEntry

sapTlsMvrpEntry 1.3.6.1.4.1.6527.3.1.2.4.3.110.1
MVRP specific information about a VLANs managed by MVRP on a SAP in a TLS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapTlsMvrpEntry  

sapTlsMvrpVlanId 1.3.6.1.4.1.6527.3.1.2.4.3.110.1.1
The value of sapTlsMvrpVlanId indicates a VLAN which is being managed by MVRP on this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4095  

sapTlsMvrpDeclared 1.3.6.1.4.1.6527.3.1.2.4.3.110.1.2
The value of sapTlsMvrpDeclared indicates whether the MVRP applicant on this SAP is declaring this VLAN on behalf of MVRP.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsMvrpRegistered 1.3.6.1.4.1.6527.3.1.2.4.3.110.1.3
The value of sapTlsMvrpRegistered indicates whether the MVRP registrant on this SAP has notified MVRP of a registration of this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

sapTlsMvrpEndStation 1.3.6.1.4.1.6527.3.1.2.4.3.110.1.4
The value of sapTlsMvrpEndStation indicates whether the MVRP registrant on this SAP is registered per end station.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tmnxGreTunnelTableLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.113
The value of tmnxGreTunnelTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxGreTunnelTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxGreTunnelTable 1.3.6.1.4.1.6527.3.1.2.4.3.114
Table to store the GRE Tunnel entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxGreTunnelEntry

tmnxGreTunnelEntry 1.3.6.1.4.1.6527.3.1.2.4.3.114.1
Information about a single GRE Tunnel entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxGreTunnelEntry  

tmnxGreTunnelName 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.1
The value of tmnxGreTunnelName specifies the name of the tunnel and is part of the index for the table tmnxGreTunnelTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tmnxGreTunnelRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.2
The tmnxGreTunnelRowStatus object is used to create and delete rows in the tmnxGreTunnelTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxGreTunnelLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.3
The value of tmnxGreTunnelLastChanged indicates the sysUpTime at the time of the last modification of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxGreTunnelDstIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.4
The value of tmnxGreTunnelDstIpAddrType specifies the address type of address in tmnxGreTunnelDstIpAddr. This object must be set at the time of creation of an entry.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxGreTunnelDstIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.5
The value of tmnxGreTunnelDstIpAddr specifies the address of the destination of this GRE tunnel. This object must be set at the time of creation of an entry.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

tmnxGreTunnelDescription 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.6
The value of tmnxGreTunnelDescription specifies the user-provided description for each tmnxGreTunnelEntry in the table tmnxGreTunnelTable.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tmnxGreTunnelLclIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.7
The value of tmnxGreTunnelLclIpAddrType specifies the address type of address in tmnxGreTunnelLclIpAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxGreTunnelLclIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.8
The value of tmnxGreTunnelLclIpAddr specifies the address of the local end-point of this GRE tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

tmnxGreTunnelRemIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.9
The value of tmnxGreTunnelRemIpAddrType specifies the address type of address in tmnxGreTunnelRemIpAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxGreTunnelRemIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.10
The value of tmnxGreTunnelRemIpAddr specifies the address of the remote end-point of this GRE tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

tmnxGreTunnelBackupRemIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.11
The value of tmnxGreTunnelBackupRemIpAddrType specifies the address type of address in tmnxGreTunnelBackupRemIpAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxGreTunnelBackupRemIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.12
The value of tmnxGreTunnelBackupRemIpAddr specifies the address of the backup remote end-point of this GRE tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

tmnxGreTunnelOperRemIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.13
The value of tmnxGreTunnelOperRemIpAddrType indicates the address type of address in tmnxGreTunnelOperRemIpAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxGreTunnelOperRemIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.14
The value of tmnxGreTunnelOperRemIpAddr indicates the address of the operational remote end-point of this GRE tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

tmnxGreTunnelDeliverySvcId 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.15
The value of tmnxGreTunnelDeliverySvcId specifies the service-id of the tunnel delivery service.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxServId  

tmnxGreTunnelAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.16
The value of tmnxGreTunnelAdminState specifies the administrative state of the tmnxGreTunnelEntry.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxGreTunnelOperState 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.17
The value of tmnxGreTunnelOperState indicates the operational status of tmnxGreTunnelEntry.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

tmnxGreTunnelOperFlags 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.18
The value of tmnxGreTunnelOperFlags indicates the reason why the tunnel is operationally down.
Status: current Access: read-only
OBJECT-TYPE    
  BITS unresolvedLocalIp(0), tunnelAdminDown(1), sapDown(2), unresolvedDeliverySvc(3), reserved(4), remIpUnreachable(5), unresolvedDstIp(6)  

tmnxGreTunnelDscp 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.19
The value of tmnxGreTunnelDscp specifies DSCP value which will be used in the GRE tunnel carrying IP header in the delivery service.
Status: current Access: read-create
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tmnxGreTunnelReassembly 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.20
The value of tmnxGreTunnelReassembly specifies the maximum number of seconds to wait to receive all fragments of a particular IPSec or GRE packet for reassembly. The tmnxGreTunnelReassembly value set to zero indicates that reassembly is disabled. The tmnxGreTunnelReassembly value set default indicates that this value will be derived from the value of TIMETRA-CHASSIS-MIB::tmnxIPsecIsaGrpTunnelReassembly object. An 'inconsistentValue' error is retuned if the value is not a multiple of 100 milli-seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..5000  

tmnxGreTunnelClearDfBit 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.21
The value of tmnxGreTunnelClearDfBit specifies whether to clear Do not Fragment (DF) bit in the outgoing packets in this GRE tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxGreTunnelIpMtu 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.22
The value of tmnxGreTunnelIpMtu specifies the MTU size for IP packets for this GRE tunnel. A value set to zero indicates maximum supported MTU size on the SAP for this GRE tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 512..9000  

tmnxGreTunnelHostISA 1.3.6.1.4.1.6527.3.1.2.4.3.114.1.23
The value of tmnxGreTunnelHostISA indicates the active ISA that is being used to host this GRE tunnel. This object will have a value of zero when this tunnel is operationally down.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxHwIndexOrZero  

tmnxGreTunnelStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.115
Table to store GRE Tunnel statistics
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxGreTunnelStatsEntry

tmnxGreTunnelStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.115.1
Statistics for a single GRE Tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxGreTunnelStatsEntry  

tmnxGreTunnelPktsTx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.1
The value of tmnxGreTunnelPktsTx indicates the number of packets this GRE Tunnel has sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelPktsTxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.2
The value of tmnxGreTunnelPktsTxLo indicates lower 32 bits of the value of tmnxGreTunnelPktsTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelPktsTxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.3
The value of tmnxGreTunnelPktsTxHi indicates higher 32 bits of the value of tmnxGreTunnelPktsTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelPktsRx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.4
The value of tmnxGreTunnelPktsRx indicates the number of packets this GRE Tunnel has received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelPktsRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.5
The value of tmnxGreTunnelPktsRxLo indicates lower 32 bits of the value of tmnxGreTunnelPktsRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelPktsRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.6
The value of tmnxGreTunnelPktsRxHi indicates higher 32 bits of the value of tmnxGreTunnelPktsRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelBytesTx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.7
The value of tmnxGreTunnelBytesTx indicates the number of bytes this GRE Tunnel has sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelBytesTxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.8
The value of tmnxGreTunnelBytesTxLo indicates lower 32 bits of the value of tmnxGreTunnelBytesTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelBytesTxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.9
The value of tmnxGreTunnelBytesTxHi indicates higher 32 bits of the value of tmnxGreTunnelBytesTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelBytesRx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.10
The value of tmnxGreTunnelBytesRx indicates the number of bytes this GRE Tunnel has received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelBytesRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.11
The value of tmnxGreTunnelBytesRxLo indicates lower 32 bits of the value of tmnxGreTunnelBytesRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelBytesRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.12
The value of tmnxGreTunnelBytesRxHi indicates higher 32 bits of the value of tmnxGreTunnelBytesRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelTxErrors 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.13
The value of tmnxGreTunnelTxErrors indicates the number of packet transmit errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelRxErrors 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.14
The value of tmnxGreTunnelRxErrors indicates the number of packet receive errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelKeyIgnoredRx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.15
The value of tmnxGreTunnelKeyIgnoredRx indicates the number of packets this GRE Tunnel received and processed ignoring key field.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelKeyIgnoredRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.16
The value of tmnxGreTunnelKeyIgnoredRxLo indicates lower 32 bits of the value of tmnxGreTunnelKeyIgnoredRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelKeyIgnoredRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.17
The value of tmnxGreTunnelKeyIgnoredRxHi indicates higher 32 bits of the value of tmnxGreTunnelKeyIgnoredRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelSeqIgnoredRx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.18
The value of tmnxGreTunnelSeqIgnoredRx indicates the number of packets this GRE Tunnel and processed ignoring sequence field.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelSeqIgnoredRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.19
The value of tmnxGreTunnelSeqIgnoredRxLo indicates lower 32 bits of the value of tmnxGreTunnelSeqIgnoredRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelSeqIgnoredRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.20
The value of tmnxGreTunnelSeqIgnoredRxHi indicates higher 32 bits of the value of tmnxGreTunnelSeqIgnoredRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelVersUnsupRx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.21
The value of tmnxGreTunnelVersUnsupRx indicates the number of packets this GRE Tunnel received with unsupported GRE version and were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelVersUnsupRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.22
The value of tmnxGreTunnelVersUnsupRxLo indicates lower 32 bits of the value of tmnxGreTunnelVersUnsupRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelVersUnsupRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.23
The value of tmnxGreTunnelVersUnsupRxHi indicates higher 32 bits of the value of tmnxGreTunnelVersUnsupRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelInvalidChksumRx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.24
The value of tmnxGreTunnelInvalidChksumRx indicates the number of packets this GRE Tunnel received with invalid checksum and were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelInvalidChksumRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.25
The value of tmnxGreTunnelInvalidChksumRxLo indicates lower 32 bits of the value of tmnxGreTunnelInvalidChksumRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelInvalidChksumRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.26
The value of tmnxGreTunnelInvalidChksumRxHi indicates higher 32 bits of the value of tmnxGreTunnelInvalidChksumRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelLoopsRx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.27
The value of tmnxGreTunnelLoopsRx indicates the number of packets this GRE Tunnel received with payload with destination address which could result in a loop and were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelLoopsRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.28
The value of tmnxGreTunnelLoopsRxLo indicates lower 32 bits of the value of tmnxGreTunnelLoopsRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelLoopsRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.29
The value of tmnxGreTunnelLoopsRxHi indicates higher 32 bits of the value of tmnxGreTunnelLoopsRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelTooBigTx 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.30
The value of tmnxGreTunnelTooBigTx indicates the number of packets this GRE Tunnel received which were too big to transmit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxGreTunnelTooBigTxLo 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.31
The value of tmnxGreTunnelTooBigTxLo indicates lower 32 bits of the value of tmnxGreTunnelTooBigTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxGreTunnelTooBigTxHi 1.3.6.1.4.1.6527.3.1.2.4.3.115.1.32
The value of tmnxGreTunnelTooBigTxHi indicates higher 32 bits of the value of tmnxGreTunnelTooBigTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapAtmVcRangeTable 1.3.6.1.4.1.6527.3.1.2.4.3.116
The sapAtmVcRangeTable contains ATM Virtual Circuit ranges for ATM Capture SAP's. Entries in this table can be created or deleted via SNMP operations. For a given ATM Capture SAP, the maximum number of ATM VC ranges is limited to 5.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapAtmVcRangeEntry

sapAtmVcRangeEntry 1.3.6.1.4.1.6527.3.1.2.4.3.116.1
Each conceptual row represents an ATM Virtual Circuit range.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapAtmVcRangeEntry  

sapAtmVcRangeIndex 1.3.6.1.4.1.6527.3.1.2.4.3.116.1.1
The value of sapAtmVcRangeIndex specifies the identifier of this ATM Virtual Circuit Range.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..5  

sapAtmVcRangeRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.116.1.2
The value of sapAtmVcRangeRowStatus specifies the row status of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapAtmVcRangeLastMgmtChange 1.3.6.1.4.1.6527.3.1.2.4.3.116.1.3
The value of sapAtmVcRangeLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapAtmVcRangeVpiStart 1.3.6.1.4.1.6527.3.1.2.4.3.116.1.4
The value of sapAtmVcRangeVpiStart specifies the start Virtual Path Identifier (VPI) of this range.
Status: current Access: read-create
OBJECT-TYPE    
  AtmVpIdentifier  

sapAtmVcRangeVpiEnd 1.3.6.1.4.1.6527.3.1.2.4.3.116.1.5
The value of sapAtmVcRangeVpiEnd specifies the end Virtual Path Identifier (VPI) of this range.
Status: current Access: read-create
OBJECT-TYPE    
  AtmVpIdentifier  

sapAtmVcRangeVciStart 1.3.6.1.4.1.6527.3.1.2.4.3.116.1.6
The value of sapAtmVcRangeVciStart specifies the start Virtual Circuit Identifier (VCI) of this range.
Status: current Access: read-create
OBJECT-TYPE    
  AtmVcIdentifier 1..65535  

sapAtmVcRangeVciEnd 1.3.6.1.4.1.6527.3.1.2.4.3.116.1.7
The value of sapAtmVcRangeVciEnd specifies the end Virtual Circuit Identifier (VCI) of this range.
Status: current Access: read-create
OBJECT-TYPE    
  AtmVcIdentifier 1..65535  

msapAtmPlcyTable 1.3.6.1.4.1.6527.3.1.2.4.3.117
The msapAtmPlcyTable has an entry for each managed SAP (MSAP) policy configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsapAtmPlcyEntry

msapAtmPlcyEntry 1.3.6.1.4.1.6527.3.1.2.4.3.117.1
Each entry represents the ATM-related configuration for a managed SAP (MSAP) policy. Entries in this table are created and destroyed automatically by the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  MsapAtmPlcyEntry  

msapAtmPlcyLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.117.1.1
The value of msapAtmPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

msapAtmPlcyIngTrafficDescIndex 1.3.6.1.4.1.6527.3.1.2.4.3.117.1.2
The value of msapAtmPlcyIngTrafficDescIndex specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used for the ingress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
Status: current Access: read-create
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 1..1000  

msapAtmPlcyEgrTrafficDescIndex 1.3.6.1.4.1.6527.3.1.2.4.3.117.1.3
The value of msapAtmPlcyEgrTrafficDescIndex specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used for the egress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
Status: current Access: read-create
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 1..1000  

msapAtmPlcyOamAlarmCellHandling 1.3.6.1.4.1.6527.3.1.2.4.3.117.1.4
The value of msapAtmPlcyOamAlarmCellHandling specifies the administrative state of the OAM Alarm Cell handling. A value of 'up' specifies that the OAM status of a PVC (Permanent Virtual Circuit) affects the MSAP operational status and OAM AIS/RDI cell generation upon an MSAP operational status of down. A value of 'down' specifies that the OAM status of a PVC will not affect the operational status of the associated MSAP and no OAM AIS/RDI cells are generated.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAdminStatus  

msapAtmPlcyOamPeriodicLoopback 1.3.6.1.4.1.6527.3.1.2.4.3.117.1.5
The value of msapAtmPlcyOamPeriodicLoopback specifies if the MSAP will run periodic OAM loopbacks. If enabled, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod; if a response is not received and tAtmSysOamRetryDown consecutive retries also result in failure, the endpoint will transition to the eteAisLoc state; once in the eteAisLoc state, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod; if a response is received for the periodic loopback and tAtmSysOamRetryUp consecutive retries also each receive a response, the endpoint will transition back to the up state.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAdminStatus  

sapEthCfmTblLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.119
The value of sapEthCfmTblLastChanged indicates the sysUpTime at the time of the last modification of the sapEthCfmTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEthCfmTable 1.3.6.1.4.1.6527.3.1.2.4.3.120
The sapEthCfmTable consists of the information pertaining to Ethernet Connectivity Fault Management (CFM) for Service Access Points (SAPs). This table is a sparse dependent extension of the sapBaseInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEthCfmEntry

sapEthCfmEntry 1.3.6.1.4.1.6527.3.1.2.4.3.120.1
The sapEthCfmEntry contains the Ethernet CFM information for a given Ethernet encapsulated SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEthCfmEntry  

sapEthCfmRowLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.120.1.1
The value of sapEthCfmRowLastChanged indicates the sysUpTime at the time of the last modification to an object for this row. If no changes were made to the entry since the instantiation of the row, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEthCfmTunnelFaultNotification 1.3.6.1.4.1.6527.3.1.2.4.3.120.1.2
The value of sapEthCfmTunnelFaultNotification specifies whether the SAP will 'accept (1)' CFM fault notifications from a Tunnel MEP and process the notifications (i.e. do fault handling and/or fault propagation), or 'ignore (2)' the notification. Both TIMETRA-SERV-MIB::svcEthCfmTunnelFaultNotification and this object MUST be set to 'accept (1)' for the SAP to process the notification. The value 'notApplicable (0)' is used by the system to represent a SAP which supports ETH-CFM, but not this object. An SNMP Set attempting to change this object to this value will result in an wrongValue error.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notApplicable(0), accept(1), ignore(2)  

sapEthCfmMcLagPropHoldTimeRemain 1.3.6.1.4.1.6527.3.1.2.4.3.120.1.3
The value of sapEthCfmMcLagPropHoldTimeRemain indicates the remaining time, in seconds, until MEPs on this SAP will react to a Multi-Chassis LAG protocol or port change. The value zero (0) indicates there are no pending events, or the SAP is not a MC-LAG SAP. This object corresponds to the global configuration timer: TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagPropHoldTime.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sapEthCfmAisEnable 1.3.6.1.4.1.6527.3.1.2.4.3.120.1.4
The value of sapEthCfmAisEnable specifies whether or not AIS frames are generated for the SAP based on a facility fault.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEthCfmVMepFilter 1.3.6.1.4.1.6527.3.1.2.4.3.120.1.5
The value of sapEthCfmVMepFilter specifies whether ETH-CFM PDUs egressing the sap or sdp-binding at the same level or lower than that of the configured service MEP (the virtual MEP) should be discarded or continue to egress. Only PDUs that were originated from the virtual MEP or from the networks side of the service will be affected, local down MEP ETH-CFM transmission are not. When set to 'true' ETH-CFM PDUs with the same or lower level as the virtual MEP will be discarded. When set to 'false', egressing ETH-CFM PDUs will pass freely as per the existing ETH-CFM configuration.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgrEncapGroupTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.121
sapEgrEncapGroupTblLastChgd indicates the timestamp of last change to the sapEgrEncapGroupTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrEncapGroupTable 1.3.6.1.4.1.6527.3.1.2.4.3.122
A table that contains SAP egress encapsulation group information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrEncapGroupEntry

sapEgrEncapGroupEntry 1.3.6.1.4.1.6527.3.1.2.4.3.122.1
Encapsulation group information about a specific group of the SAP on the egress side.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrEncapGroupEntry  

sapEgrEncapGroupName 1.3.6.1.4.1.6527.3.1.2.4.3.122.1.1
The sapEgrEncapGroupName indicates the encapsulation group name on this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapEgrEncapGroupRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.122.1.2
This is the Row Status of the entry. This allows creation/deletion of rows in this table. To create row entries in this table sapEgrEncapGroupType MUST be specified in the same SNMP SET PDU request as sapEgrEncapGroupRowStatus or a 'noCreation' error is returned.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapEgrEncapGroupLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.122.1.3
sapEgrEncapGroupLastChanged indicates the timestamp of last change to this row in sapEgrEncapGroupTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrEncapGroupType 1.3.6.1.4.1.6527.3.1.2.4.3.122.1.4
The value of sapEgrEncapGroupType specifies the encapsulation group type configured on this SAP on egress side. To create row entries in this table sapEgrEncapGroupType MUST be specified in the same SNMP SET PDU request as sapEgrEncapGroupRowStatus or a 'noCreation' error is returned.
Status: current Access: read-create
OBJECT-TYPE    
  TSapEgrEncapGroupType  

sapEgrEncapGroupQosPerMember 1.3.6.1.4.1.6527.3.1.2.4.3.122.1.5
The value of sapEgrEncapGroupQosPerMember specifies how the QoS members will be added to or deleted from the encapsulation group. If the value of sapEgrEncapGroupQosPerMember is set to 'true', members are added or deleted one at a time. If the value of sapEgrEncapGroupQosPerMember is set to 'false', members are added to the encapsulation group as a range of contiguous values.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgrEncapGroupQosPolicyId 1.3.6.1.4.1.6527.3.1.2.4.3.122.1.6
The value of sapEgrEncapGroupQosPolicyId specifies the QoS policy id of the encapsulation group on this SAP on egress side. The value '0' for sapEgrEncapGroupQosPolicyId means that there is no QoS policy.
Status: current Access: read-create
OBJECT-TYPE    
  TSapEgrEncapGrpQosPolicyIdOrZero  

sapEgrEncapGroupSchedulerPolicy 1.3.6.1.4.1.6527.3.1.2.4.3.122.1.7
The value of sapEgrEncapGroupSchedulerPolicy specifies the name of the encapsulation group scheduler policy on this SAP on egress side.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

sapEgrEncapGroupAggRateLimit 1.3.6.1.4.1.6527.3.1.2.4.3.122.1.8
The value of the object sapEgrEncapGroupAggRateLimit specifies the maximum total rate of all egress encapsulation groups for this SAP. The value '-1' for sapEgrEncapGroupAggRateLimit means that there is no limit.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

sapEgrEncapGrpFrameBasedAccnt 1.3.6.1.4.1.6527.3.1.2.4.3.122.1.9
The value of sapEgrEncapGrpFrameBasedAccnt specifies whether to use frame-based accounting when evaluating sapEgrEncapGroupAggRateLimit for all egress queues for this SAP. If the value is 'false', the default packet-based accounting method will be used.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

sapEgrEncapGrpMemActTblLastChgd 1.3.6.1.4.1.6527.3.1.2.4.3.123
sapEgrEncapGrpMemActTblLastChgd indicates the timestamp of last change to the sapEgrEncapGrpMemberActTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrEncapGrpMemberActTable 1.3.6.1.4.1.6527.3.1.2.4.3.124
sapEgrEncapGrpMemberActTable creates or deletes one or more SAP egress encapsulation group member row entries in the sapEgrEncapGrpMemberTable by setting a single row in this table. An SNMP GET on this table will always return a 'noSuchInstance' error.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrEncapGrpMemberActEntry

sapEgrEncapGrpMemberActEntry 1.3.6.1.4.1.6527.3.1.2.4.3.124.1
Encapsulation group member action information about a specific or a range of groups of the SAP on the egress side. To create/delete row entries in the sapEgrEncapGrpMemberTable objects sapEgrEncapGroupBeginMember, sapEgrEncapGroupEndMember and sapEgrEncapGroupMemberAction MUST all be specified in the same SNMP SET PDU request or a 'noCreation' error is returned. To create/delete a single row entry in the sapEgrEncapGrpMemberTable sapEgrEncapGroupEndMember MUST be same as sapEgrEncapGroupBeginMember.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrEncapGrpMemberActEntry  

sapEgrEncapGroupBeginMember 1.3.6.1.4.1.6527.3.1.2.4.3.124.1.1
The value of sapEgrEncapGroupBeginMember specifies the single encapsulation member identifier or the start value of encapsulation member identifier range.
Status: current Access: read-write
OBJECT-TYPE    
  SvcISID  

sapEgrEncapGroupEndMember 1.3.6.1.4.1.6527.3.1.2.4.3.124.1.2
The value of sapEgrEncapGroupEndMember specifies the end value of encapsulation member identifier range. The value of sapEgrEncapGroupEndMember MUST be greater than that of sapEgrEncapGroupBeginMember.
Status: current Access: read-write
OBJECT-TYPE    
  SvcISID  

sapEgrEncapGroupMemberAction 1.3.6.1.4.1.6527.3.1.2.4.3.124.1.3
The value of sapEgrEncapGroupMemberAction specifies whether members of encapsulation group are created or destroyed. An 'inconsistentValue' error is returned if sapEgrEncapGroupMemberAction is set and sapEgrEncapGroupBeginMember or sapEgrEncapGroupEndMember is not set. An 'inconsistentValue' error is returned if sapEgrEncapGroupEndMember is set to a value smaller than sapEgrEncapGroupBeginMember.
Status: current Access: read-write
OBJECT-TYPE    
  TSapEgrEncapGroupActionType  

sapEgrEncapGrpMemberTable 1.3.6.1.4.1.6527.3.1.2.4.3.126
A table that contains SAP egress encapsulation group member entry information. The row entries in this table are created or destroyed by SNMP SET operations on sapEgrEncapGrpMemberActTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrEncapGrpMemberEntry

sapEgrEncapGrpMemberEntry 1.3.6.1.4.1.6527.3.1.2.4.3.126.1
Encapsulation group member entry information about a specific group of the SAP on the egress side.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrEncapGrpMemberEntry  

sapEgrEncapGrpMember 1.3.6.1.4.1.6527.3.1.2.4.3.126.1.1
The value of sapEgrEncapGrpMember indicates the encapsulation member identifier of the SAP on the egress side.
Status: current Access: not-accessible
OBJECT-TYPE    
  SvcISID 0..16777215  

sapEgrEncapGrpRangeEndId 1.3.6.1.4.1.6527.3.1.2.4.3.126.1.2
The value of sapEgrEncapGrpRangeEndId specifies the end value of encapsulation member identifier range. When the encapsualtion group's qos-per-member object is set to true, the value of sapEgrEncapGrpRangeEndId is always equal to the sapEgrEncapGrpMember. This is because member ranges are not supported when qos-per-member is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  SvcISID  

sapEgrEncapGrpMemberLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.126.1.3
The value of sapEgrEncapGrpMemberLastChanged indicates the timestamp of last change to this row in sapEgrEncapGrpMemberEntry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapAtmPppStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.127
A table that contains ATM SAP PPP statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapAtmPppStatsEntry

sapAtmPppStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.127.1
PPP statistics about a specific ATM SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapAtmPppStatsEntry  

sapAtmPppStatsRxPackets 1.3.6.1.4.1.6527.3.1.2.4.3.127.1.1
The value of sapAtmPppStatsRxPackets indicates the number of PPP packets received on this ATM SAP since the last re-initialization of the local network management subsystem, or the last time the statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapAtmPppStatsRxDropped 1.3.6.1.4.1.6527.3.1.2.4.3.127.1.2
The value of sapAtmPppStatsRxPackets indicates the number of PPP packets dropped on this ATM SAP since the last re-initialization of the local network management subsystem, or the last time the statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapAtmPppStatsTxPackets 1.3.6.1.4.1.6527.3.1.2.4.3.127.1.3
The value of sapAtmPppStatsRxPackets indicates the number of PPP packets transmitted on this ATM SAP since the last re-initialization of the local network management subsystem, or the last time the statistics were cleared.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxSapGlobalObjs 1.3.6.1.4.1.6527.3.1.2.4.3.128
OBJECT IDENTIFIER    

tmnxSapGreTunnelCount 1.3.6.1.4.1.6527.3.1.2.4.3.128.1
The value of tmnxSapGreTunnelCount indicates the number of GRE tunnels operating in the system at this time.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

sapEgrEGBaseStTable 1.3.6.1.4.1.6527.3.1.2.4.3.129
The sapEgrEGBaseStTable contains egress Encap Group basic SAP statistics at the Group level. This statistics table is valid for Encap Groups created without enabling sapEgrEncapGroupQosPerMember. In the descriptions below 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrEGBaseStEntry

sapEgrEGBaseStEntry 1.3.6.1.4.1.6527.3.1.2.4.3.129.1
Egress statistics about a specific Encap Group of a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrEGBaseStEntry  

sapEgrEGBaseStLastClearedTime 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.1
The value of sapEgrEGBaseStLastClearedTime indicates the sysUpTime when the counters in this table were last cleared.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrEGBaseStCustId 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.2
The value of sapEgrEGBaseStCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrEGBaseStQcDpdInPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.3
The value of sapEgrEGBaseStQcDpdInPfPkts indicates the number of in-profile packets dropped by the egress Qchip due to: SAP state,egress MAC, IP or IPv6 filter, same segment discard,bad checksum, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGBaseStQcDpdInPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.4
The value of sapEgrEGBaseStQcDpdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcDpdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcDpdInPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.5
The value of sapEgrEGBaseStQcDpdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcDpdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcDpdInPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.6
The value of sapEgrEGBaseStQcDpdInPfOcts indicates the number of in-profile octets dropped by the egress Qchip due to: SAP state, egress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGBaseStQcDpdInPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.7
The value of sapEgrEGBaseStQcDpdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcDpdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcDpdInPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.8
The value of sapEgrEGBaseStQcDpdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcDpdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcDpdOutPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.9
The value of sapEgrEGBaseStQcDpdOutPfPkts indicates the number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGBaseStQcDpdOutPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.10
The value of sapEgrEGBaseStQcDpdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcDpdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcDpdOutPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.11
The value of sapEgrEGBaseStQcDpdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcDpdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcDpdOutPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.12
The value of sapEgrEGBaseStQcDpdOutPfOcts indicates the number of out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGBaseStQcDpdOutPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.13
The value of sapEgrEGBaseStQcDpdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcDpdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcDpdOutPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.14
The value of sapEgrEGBaseStQcDpdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcDpdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcFwdInPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.15
The value of sapEgrEGBaseStQcFwdInPfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGBaseStQcFwdInPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.16
The value of sapEgrEGBaseStQcFwdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcFwdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcFwdInPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.17
The value of sapEgrEGBaseStQcFwdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcFwdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcFwdInPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.18
The value of sapEgrEGBaseStQcFwdInPfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGBaseStQcFwdInPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.19
The value of sapEgrEGBaseStQcFwdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcFwdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcFwdInPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.20
The value of sapEgrEGBaseStQcFwdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcFwdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcFwdOutPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.21
The value of sapEgrEGBaseStQcFwdOutPfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGBaseStQcFwdOutPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.22
The value of sapEgrEGBaseStQcFwdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcFwdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcFwdOutPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.23
The value of sapEgrEGBaseStQcFwdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcFwdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcFwdOutPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.24
The value of sapEgrEGBaseStQcFwdOutPfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGBaseStQcFwdOutPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.25
The value of sapEgrEGBaseStQcFwdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGBaseStQcFwdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGBaseStQcFwdOutPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.129.1.26
The value of sapEgrEGBaseStQcFwdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGBaseStQcFwdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStTable 1.3.6.1.4.1.6527.3.1.2.4.3.130
The sapEgrEGMbrBaseStTable that contains basic Encap Group statistics per member. This statistics table is valid for Encap Groups created by enabling sapEgrEncapGroupQosPerMember. In the descriptions below 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrEGMbrBaseStEntry

sapEgrEGMbrBaseStEntry 1.3.6.1.4.1.6527.3.1.2.4.3.130.1
Egress statistics about a specific Encap Group member of a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrEGMbrBaseStEntry  

sapEgrEGMbrBaseStLstClearedTime 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.1
The value of sapEgrEGMbrBaseStLstClearedTime indicates the sysUpTime when the counters in this table were last cleared.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapEgrEGMbrBaseStCustId 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.2
The value of sapEgrEGMbrBaseStCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrEGMbrBaseStQcDpdInPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.3
The value of sapEgrEGMbrBaseStQcDpdInPfPkts indicates the number of in-profile packets dropped by the egress Qchip due to: SAP state, gress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrBaseStQcDpdInPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.4
The value of sapEgrEGMbrBaseStQcDpdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcDpdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcDpdInPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.5
The value of sapEgrEGMbrBaseStQcDpdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcDpdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcDpdInPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.6
The value of sapEgrEGMbrBaseStQcDpdInPfOcts indicates the number of in-profile octets dropped by the egress Qchip due to: SAP state, egress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrBaseStQcDpdInPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.7
The value of sapEgrEGMbrBaseStQcDpdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcDpdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcDpdInPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.8
The value of sapEgrEGMbrBaseStQcDpdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcDpdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcDpdOutPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.9
The value of sapEgrEGMbrBaseStQcDpdOutPfPkts indicates the number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrBaseStQcDpdOutPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.10
The value of sapEgrEGMbrBaseStQcDpdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcDpdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcDpdOutPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.11
The value of sapEgrEGMbrBaseStQcDpdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcDpdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcDpdOutPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.12
The value of sapEgrEGMbrBaseStQcDpdOutPfOcts indicates the number of out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrBaseStQcDpdOutPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.13
The value of sapEgrEGMbrBaseStQcDpdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcDpdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcDpdOutPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.14
The value of sapEgrEGMbrBaseStQcDpdOutPfOctsL indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcDpdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcFwdInPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.15
The value of sapEgrEGMbrBaseStQcFwdInPfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrBaseStQcFwdInPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.16
The value of sapEgrEGMbrBaseStQcFwdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcFwdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcFwdInPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.17
The value of sapEgrEGMbrBaseStQcFwdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcFwdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcFwdInPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.18
The value of sapEgrEGMbrBaseStQcFwdInPfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrBaseStQcFwdInPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.19
The value of sapEgrEGMbrBaseStQcFwdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcFwdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcFwdInPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.20
The value of sapEgrEGMbrBaseStQcFwdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcFwdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcFwdOutPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.21
The value of sapEgrEGMbrBaseStQcFwdOutPfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrBaseStQcFwdOutPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.22
The value of sapEgrEGMbrBaseStQcFwdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcFwdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcFwdOutPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.23
The value of sapEgrEGMbrBaseStQcFwdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcFwdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcFwdOutPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.24
The value of sapEgrEGMbrBaseStQcFwdOutPfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrBaseStQcFwdOutPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.25
The value of sapEgrEGMbrBaseStQcFwdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrBaseStQcFwdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrBaseStQcFwdOutPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.130.1.26
The value of sapEgrEGMbrBaseStQcFwdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrBaseStQcFwdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStTable 1.3.6.1.4.1.6527.3.1.2.4.3.131
The sapEgrEGQueueStTable contains egress Encap Group queue statistics at the Group level. This statistics table is valid for Encap Groups created without enabling sapEgrEncapGroupQosPerMember.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrEGQueueStEntry

sapEgrEGQueueStEntry 1.3.6.1.4.1.6527.3.1.2.4.3.131.1
Egress QoS queue statistics about a specific Encap group of a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrEGQueueStEntry  

sapEgrEGQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.1
The value of sapEgrEGQueueId indicates the index of the egress QoS queue of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgrQueueId  

sapEgrEGCustId 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.2
The value of sapEgrEGCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrEGQueueStFwdInPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.3
The value of sapEgrEGQueueStFwdInPfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGQueueStFwdInPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.4
The value of sapEgrEGQueueStFwdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGQueueStFwdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStFwdInPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.5
The value of sapEgrEGQueueStFwdInPfPktsL indicates the higher 32 bits of the value of sapEgrEGQueueStFwdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStDpdInPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.6
The value of sapEgrEGQueueStDpdInPfPkts indicates the number of in-profile packets discarded by the egress Queue due to: MBS exceeded, buffer pool limit exceeded etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGQueueStDpdInPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.7
The value of sapEgrEGQueueStDpdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGQueueStDpdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStDpdInPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.8
The value of sapEgrEGQueueStDpdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGQueueStDpdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStFwdOutPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.9
The value of sapEgrEGQueueStFwdOutPfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGQueueStFwdOutPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.10
The value of sapEgrEGQueueStFwdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGQueueStFwdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStFwdOutPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.11
The value of sapEgrEGQueueStFwdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGQueueStFwdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStDpdOutPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.12
The value of sapEgrEGQueueStDpdOutPfPkts indicates the number of out-of-profile packets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGQueueStDpdOutPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.13
The value of sapEgrEGQueueStDpdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGQueueStDpdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStDpdOutPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.14
The value of sapEgrEGQueueStDpdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGQueueStDpdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStFwdInPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.15
The value of sapEgrEGQueueStFwdInPfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the egress queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGQueueStFwdInPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.16
The value of sapEgrEGQueueStFwdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGQueueStFwdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStFwdInPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.17
The value of sapEgrEGQueueStFwdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGQueueStFwdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStDpdInPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.18
The value of sapEgrEGQueueStDpdInPfOcts indicates the number of in-profile octets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGQueueStDpdInPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.19
The value of sapEgrEGQueueStDpdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGQueueStDpdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStDpdInPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.20
The value of sapEgrEGQueueStDpdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGQueueStDpdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStFwdOutPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.21
The value of sapEgrEGQueueStFwdOutPfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGQueueStFwdOutPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.22
The value of sapEgrEGQueueStFwdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGQueueStFwdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStFwdOutPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.23
The value of sapEgrEGQueueStFwdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGQueueStFwdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStDpdOutPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.24
The value of sapEgrEGQueueStDpdOutPfOcts indicates the number of out-of-profile octets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGQueueStDpdOutPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.25
The value of sapEgrEGQueueStDpdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGQueueStDpdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGQueueStDpdOutPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.131.1.26
The value of sapEgrEGQueueStDpdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGQueueStDpdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStTable 1.3.6.1.4.1.6527.3.1.2.4.3.132
The sapEgrEGMbrQueueStTable contains egress Encap Group member queue statistics per member. This statistics table is valid for Encap Groups created by enabling sapEgrEncapGroupQosPerMember.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrEGMbrQueueStEntry

sapEgrEGMbrQueueStEntry 1.3.6.1.4.1.6527.3.1.2.4.3.132.1
Egress QoS queue statistics about a specific Encap group member of a SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrEGMbrQueueStEntry  

sapEgrEGMbrQueueId 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.1
The value of sapEgrEGMbrQueueId indicates the index of the egress QoS queue of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgrQueueId  

sapEgrEGMbrQueueCustId 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.2
The value of sapEgrEGMbrQueueCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrEGMbrQueueStFwdInPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.3
The value of sapEgrEGMbrQueueStFwdInPfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrQueueStFwdInPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.4
The value of sapEgrEGMbrQueueStFwdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStFwdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStFwdInPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.5
The value of sapEgrEGMbrQueueStFwdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStFwdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStDpdInPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.6
The value of sapEgrEGMbrQueueStDpdInPfPkts indicates the number of in-profile packets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrQueueStDpdInPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.7
The value of sapEgrEGMbrQueueStDpdInPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStDpdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStDpdInPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.8
The value of sapEgrEGMbrQueueStDpdInPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStDpdInPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStFwdOutPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.9
The value of sapEgrEGMbrQueueStFwdOutPfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrQueueStFwdOutPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.10
The value of sapEgrEGMbrQueueStFwdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStFwdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStFwdOutPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.11
The value of sapEgrEGMbrQueueStFwdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStFwdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStDpdOutPfPkts 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.12
The value of sapEgrEGMbrQueueStDpdOutPfPkts indicates the number of out-of-profile packets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrQueueStDpdOutPfPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.13
The value of sapEgrEGMbrQueueStDpdOutPfPktsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStDpdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStDpdOutPfPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.14
The value of sapEgrEGMbrQueueStDpdOutPfPktsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStDpdOutPfPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStFwdInPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.15
The value of sapEgrEGMbrQueueStFwdInPfOcts indicates the number of in-profile octets (rate below CIR) forwarded by the egress queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrQueueStFwdInPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.16
The value of sapEgrEGMbrQueueStFwdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStFwdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStFwdInPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.17
The value of sapEgrEGMbrQueueStFwdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStFwdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStDpdInPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.18
The value of sapEgrEGMbrQueueStDpdInPfOcts indicates the number of in-profile octets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrQueueStDpdInPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.19
The value of sapEgrEGMbrQueueStDpdInPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStDpdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStDpdInPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.20
The value of sapEgrEGMbrQueueStDpdInPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStDpdInPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStFwdOutPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.21
The value of sapEgrEGMbrQueueStFwdOutPfOcts indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrQueueStFwdOutPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.22
The value of sapEgrEGMbrQueueStFwdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStFwdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStFwdOutPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.23
The value of sapEgrEGMbrQueueStFwdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStFwdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStDpdOutPfOcts 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.24
The value of sapEgrEGMbrQueueStDpdOutPfOcts indicates the number of out-of-profile octets discarded by the egress queue due to: MBS exceeded, buffer pool limit exceeded, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrQueueStDpdOutPfOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.25
The value of sapEgrEGMbrQueueStDpdOutPfOctsL indicates the lower 32 bits of the value of sapEgrEGMbrQueueStDpdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrQueueStDpdOutPfOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.132.1.26
The value of sapEgrEGMbrQueueStDpdOutPfOctsH indicates the higher 32 bits of the value of sapEgrEGMbrQueueStDpdOutPfOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGSchedStTable 1.3.6.1.4.1.6527.3.1.2.4.3.133
The sapEgrEGSchedStTable contains egress encapsulation group QoS scheduler SAP at the Group level. This statistics table is valid for Encap Groups created without enabling sapEgrEncapGroupQosPerMember.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrEGSchedStEntry

sapEgrEGSchedStEntry 1.3.6.1.4.1.6527.3.1.2.4.3.133.1
Egress statistics about a specific QoS scheduler instantiated per encapsulation group of SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrEGSchedStEntry  

sapEgrEGSchedStName 1.3.6.1.4.1.6527.3.1.2.4.3.133.1.1
The sapEgrEGSchedStName specifies the name of the egress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapEgrEGSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.133.1.2
The value of sapEgrEGSchedCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrEGSchedStFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.133.1.3
The value of sapEgrEGSchedStFwdPkts indicates thee number of packets forwarded by the egress QoS scheduler of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGSchedStFwdPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.133.1.4
The value of sapEgrEGSchedStFwdPktsL indicates the lower 32 bits of the value of sapEgrEGSchedStFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGSchedStFwdPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.133.1.5
The value of sapEgrEGSchedStFwdPktsH indicates the higher 32 bits of the value of sapEgrEGSchedStFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGSchedStFwdOcts 1.3.6.1.4.1.6527.3.1.2.4.3.133.1.6
The value of sapEgrEGSchedStFwdOcts indicates the number of octets forwarded by the egress QoS scheduler of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGSchedStFwdOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.133.1.7
The value of sapEgrEGSchedStFwdOctsL indicates the lower 32 bits of the value of sapEgrEGSchedStFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGSchedStFwdOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.133.1.8
The value of sapEgrEGSchedStFwdOctsH indicates the higher 32 bits of the value of sapEgrEGSchedStFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrSchedStTable 1.3.6.1.4.1.6527.3.1.2.4.3.134
The sapEgrEGMbrSchedStTable contains egress encapsulation group QoS scheduler SAP per member. This statistics table is valid for Encap Groups created by enabling sapEgrEncapGroupQosPerMember.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapEgrEGMbrSchedStEntry

sapEgrEGMbrSchedStEntry 1.3.6.1.4.1.6527.3.1.2.4.3.134.1
Egress statistics about a specific QoS scheduler instantiated per encapsulation group member of SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapEgrEGMbrSchedStEntry  

sapEgrEGMbrSchedStName 1.3.6.1.4.1.6527.3.1.2.4.3.134.1.1
The sapEgrEGMbrSchedStName specifies the name of the egress QoS scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapEgrEGMbrSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.134.1.2
The value of sapEgrEGMbrSchedCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapEgrEGMbrSchedStFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.134.1.3
The value of sapEgrEGMbrSchedStFwdPkts indicates the number of packets forwarded by the egress QoS scheduler of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrSchedStFwdPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.134.1.4
The value of sapEgrEGMbrSchedStFwdPktsL indicates the lower 32 bits of the value of sapEgrEGMbrSchedStFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrSchedStFwdPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.134.1.5
The value of sapEgrEGMbrSchedStFwdPktsH indicates the higher 32 bits of the value of sapEgrEGMbrSchedStFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrSchedStFwdOcts 1.3.6.1.4.1.6527.3.1.2.4.3.134.1.6
The value of sapEgrEGMbrSchedStFwdOcts indicates the number of octets forwarded by the egress QoS scheduler of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapEgrEGMbrSchedStFwdOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.134.1.7
The value of sapEgrEGMbrSchedStFwdOctsL indicates the lower 32 bits of the value of sapEgrEGMbrSchedStFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapEgrEGMbrSchedStFwdOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.134.1.8
The value of sapEgrEGMbrSchedStFwdOctsH indicates the higher 32 bits of the value of sapEgrEGMbrSchedStFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrEGSchedStTable 1.3.6.1.4.1.6527.3.1.2.4.3.135
The sapPortIdEgrEGSchedStTable contains egress QoS scheduler SAP statistics per port at the Group level. This statistics table is valid for Encap Groups created without enabling sapEgrEncapGroupQosPerMember. This table is used when the encap group's SAP is a CCAG or LAG in 'link' mode or an APS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapPortIdEgrEGSchedStEntry

sapPortIdEgrEGSchedStEntry 1.3.6.1.4.1.6527.3.1.2.4.3.135.1
Egress statistics about a specific Encap Group's QoS scheduler port of a SAP. Entries are created when a scheduler policy is applied to an Encap Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapPortIdEgrEGSchedStEntry  

sapPortIdEgrEGSchedStName 1.3.6.1.4.1.6527.3.1.2.4.3.135.1.1
The sapPortIdEgrEGSchedStName specifies the name of the egress encapsulation group port scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapPortIdEgrEGSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.135.1.2
The value of sapPortIdEgrEGSchedCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapPortIdEgrEGSchedFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.135.1.3
The value of sapPortIdEgrEGSchedFwdPkts indicates the number of packets forwarded by the egress port scheduler of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrEGSchedFwdPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.135.1.4
The value of sapPortIdEgrEGSchedFwdPktsL indicates the lower 32 bits of the value of sapPortIdEgrEGSchedFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrEGSchedFwdPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.135.1.5
The value sapPortIdEgrEGSchedFwdPktsH indicates the higher 32 bits of the value of sapPortIdEgrEGSchedFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrEGSchedFwdOcts 1.3.6.1.4.1.6527.3.1.2.4.3.135.1.6
The value sapPortIdEgrEGSchedFwdOcts indicates the number of octets forwarded by the egress port scheduler of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrEGSchedFwdOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.135.1.7
The value of sapPortIdEgrEGSchedFwdOctsL indicates the lower 32 bits of the value of sapPortIdEgrEGSchedFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrEGSchedFwdOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.135.1.8
The value sapPortIdEgrEGSchedFwdOctsH indicates the higher 32 bits of the value of sapPortIdEgrEGSchedFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrEGMbrSchedStTable 1.3.6.1.4.1.6527.3.1.2.4.3.136
The sapPortIdEgrEGMbrSchedStTable contains egress QoS scheduler SAP statistics per port. This statistics table is valid for Encap Groups created by enabling sapEgrEncapGroupQosPerMember. This table fetches statistics per member. This table is used when the Encap Group's SAP is a CCAG or LAG in 'link' mode or an APS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapPortIdEgrEGMbrSchedStEntry

sapPortIdEgrEGMbrSchedStEntry 1.3.6.1.4.1.6527.3.1.2.4.3.136.1
Egress statistics about a specific Encap Group member QoS scheduler port of a SAP. Entries are created when a scheduler policy is applied to an Encap Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapPortIdEgrEGMbrSchedStEntry  

sapPortIdEgrEGMbrSchedStName 1.3.6.1.4.1.6527.3.1.2.4.3.136.1.1
The sapPortIdEgrEGMbrSchedStName specifies the name of the egress encapsulation group QOS port scheduler of this SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

sapPortIdEgrEGMbrSchedCustId 1.3.6.1.4.1.6527.3.1.2.4.3.136.1.2
The value of sapPortIdEgrEGMbrSchedCustId indicates the Customer ID for the associated service.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

sapPortIdEgrEGMbrSchedFwdPkts 1.3.6.1.4.1.6527.3.1.2.4.3.136.1.3
The value of sapPortIdEgrEGMbrSchedFwdPkts indicates the number of packets forwarded by the egress port scheduler of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrEGMbrSchedFwdPktsL 1.3.6.1.4.1.6527.3.1.2.4.3.136.1.4
The value of sapPortIdEgrEGMbrSchedFwdPktsL indicates the lower 32 bits of the value of sapPortIdEgrEGMbrSchedFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrEGMbrSchedFwdPktsH 1.3.6.1.4.1.6527.3.1.2.4.3.136.1.5
The value sapPortIdEgrEGMbrSchedFwdPktsH indicates the higher 32 bits of the value of sapPortIdEgrEGMbrSchedFwdPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrEGMbrSchedFwdOcts 1.3.6.1.4.1.6527.3.1.2.4.3.136.1.6
The value sapPortIdEgrEGMbrSchedFwdOcts indicates the number of octets forwarded by the egress port scheduler of this SAP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

sapPortIdEgrEGMbrSchedFwdOctsL 1.3.6.1.4.1.6527.3.1.2.4.3.136.1.7
The value of sapPortIdEgrEGMbrSchedFwdOctsL indicates the lower 32 bits of the value of sapPortIdEgrEGMbrSchedFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapPortIdEgrEGMbrSchedFwdOctsH 1.3.6.1.4.1.6527.3.1.2.4.3.136.1.8
The value sapPortIdEgrEGMbrSchedFwdOctsH indicates the higher 32 bits of the value of sapPortIdEgrEGMbrSchedFwdOcts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapDefHostTableLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.137
The value of the object sapDefHostTableLastChanged indicates the value of sysUpTime at the time of the last modification of an conceptual row in the sapDefHostTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapDefHostTable 1.3.6.1.4.1.6527.3.1.2.4.3.138
A table that contains SAP default host information. Entries in this table can be created or deleted via SNMP operations. A row in this table can only be created for a SAP in a group interface, that is each row in the sapBaseInfoTable where the value of sapIesIfIndex corresponds to a row in the vRtrIfTable where the value of vRtrIfType is equal to 'serviceIesGroup' or 'serviceVprnGroup'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SapDefHostEntry

sapDefHostEntry 1.3.6.1.4.1.6527.3.1.2.4.3.138.1
SAP default host specific information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SapDefHostEntry  

sapDefHostIpv4SubnetAddr 1.3.6.1.4.1.6527.3.1.2.4.3.138.1.1
The value of the object sapDefHostIpv4SubnetAddr specifies the IPv4 subnet address for this SAP default host. It must be equal to one of the addresses of the subscriber interface this SAP belongs to, that is one of its vRiaIpAddress values.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sapDefHostIpv4SubnetMask 1.3.6.1.4.1.6527.3.1.2.4.3.138.1.2
The value of sapDefHostIpv4SubnetMask specifies the subnet mask applicable to sapDefHostIpv4SubnetAddr. It must be equal to the netmask of the subscriber interface address associated with sapDefHostIpv4SubnetAddr, that is the vRiaNetMask of the same row in the vRtrIpAddrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sapDefHostLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.138.1.3
The value of sapDefHostLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sapDefHostRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.138.1.4
The value of sapDefHostRowStatus specifies the row status of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sapDefHostNextHopIpv4Addr 1.3.6.1.4.1.6527.3.1.2.4.3.138.1.5
The value of sapDefHostNextHopIpv4Addr specifies the next-hop IP address for this SAP default host. The value all zeroes is not allowed. A value for sapDefHostNextHopIpv4Addr must be specified when a row is created and this value cannot be changed afterwards.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

tmnxIpTunnelTableLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.141
The value of tmnxIpTunnelTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxIpTunnelTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxIpTunnelTable 1.3.6.1.4.1.6527.3.1.2.4.3.142
The tmnxIpTunnelTable contains IP Tunnel entries for each SAP. Entries are created/deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxIpTunnelEntry

tmnxIpTunnelEntry 1.3.6.1.4.1.6527.3.1.2.4.3.142.1
The tmnxIpTunnelEntry contains information about a single IP Tunnel entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxIpTunnelEntry  

tmnxIpTunnelName 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.1
The value of tmnxIpTunnelName specifies the name of the tunnel and is part of the index for the table tmnxIpTunnelTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tmnxIpTunnelRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.2
The tmnxIpTunnelRowStatus object is used to create and delete rows in the tmnxIpTunnelTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxIpTunnelLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.3
The value of tmnxIpTunnelLastChanged indicates the sysUpTime at the time of the last modification of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxIpTunnelGreHeader 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.4
The value of tmnxIpTunnelGreHeader specifies whether the tunnel will include a GRE header in it.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxIpTunnelDescription 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.5
The value of tmnxIpTunnelDescription specifies the user-provided description for each tmnxIpTunnelEntry in the table tmnxIpTunnelTable.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tmnxIpTunnelLclIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.6
The value of tmnxIpTunnelLclIpAddrType specifies the address type of address in tmnxIpTunnelLclIpAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxIpTunnelLclIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.7
The value of tmnxIpTunnelLclIpAddr specifies the address of the local end-point of this IP tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

tmnxIpTunnelRemIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.8
The value of tmnxIpTunnelRemIpAddrType specifies the address type of address in tmnxIpTunnelRemIpAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxIpTunnelRemIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.9
The value of tmnxIpTunnelRemIpAddr specifies the address of the remote end-point of this IP tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

tmnxIpTunnelBackupRemIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.10
The value of tmnxIpTunnelBackupRemIpAddrType specifies the address type of address in tmnxIpTunnelBackupRemIpAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxIpTunnelBackupRemIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.11
The value of tmnxIpTunnelBackupRemIpAddr specifies the address of the backup remote end-point of this IP tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

tmnxIpTunnelOperRemIpAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.12
The value of tmnxIpTunnelOperRemIpAddrType indicates the address type of address in tmnxIpTunnelOperRemIpAddr.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxIpTunnelOperRemIpAddr 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.13
The value of tmnxIpTunnelOperRemIpAddr indicates the address of the operational remote end-point of this IP tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

tmnxIpTunnelDeliverySvcId 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.14
The value of tmnxIpTunnelDeliverySvcId specifies the service-id of the tunnel delivery service.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxServId  

tmnxIpTunnelAdminState 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.15
The value of tmnxIpTunnelAdminState specifies the administrative state of the tmnxIpTunnelEntry.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxIpTunnelOperState 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.16
The value of tmnxIpTunnelOperState indicates the operational status of tmnxIpTunnelEntry.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

tmnxIpTunnelOperFlags 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.17
The value of tmnxIpTunnelOperFlags indicates the reason why the tunnel is operationally down.
Status: current Access: read-only
OBJECT-TYPE    
  BITS unresolvedLocalIp(0), tunnelAdminDown(1), sapDown(2), unresolvedDeliverySvc(3), reserved(4), remIpUnreachable(5), unresolvedDstIp(6)  

tmnxIpTunnelDscp 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.18
The value of tmnxIpTunnelDscp specifies DSCP value which will be used in the IP tunnel carrying IP header in the delivery service.
Status: current Access: read-create
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tmnxIpTunnelReassembly 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.19
The value of tmnxIpTunnelReassembly specifies the maximum number of seconds to wait to receive all fragments of a particular IPSec or IP packet for reassembly. The tmnxIpTunnelReassembly value set to zero indicates that reassembly is disabled. The tmnxIpTunnelReassembly value set default indicates that this value will be derived from the value of TIMETRA-CHASSIS-MIB::tmnxIPsecIsaGrpTunnelReassembly object. An 'inconsistentValue' error is retuned if the value is not a multiple of 100 milli-seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..5000  

tmnxIpTunnelClearDfBit 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.20
The value of tmnxIpTunnelClearDfBit specifies whether to clear Do not Fragment (DF) bit in the outgoing packets in this IP tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxIpTunnelIpMtu 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.21
The value of tmnxIpTunnelIpMtu specifies the MTU size for IP packets for this IP tunnel. A value set to zero indicates maximum supported MTU size on the SAP for this IP tunnel.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 512..9000  

tmnxIpTunnelHostISA 1.3.6.1.4.1.6527.3.1.2.4.3.142.1.22
The value of tmnxIpTunnelHostISA indicates the active ISA that is being used to host this GRE tunnel. This object will have a value of zero when this tunnel is operationally down.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxHwIndexOrZero  

tmnxIpTnlDstAddrTableLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.143
The value of tmnxIpTnlDstAddrTableLastChanged indicates the sysUpTime at the time of the last modification to tmnxIpTnlDstAddrTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxIpTnlDstAddrTable 1.3.6.1.4.1.6527.3.1.2.4.3.144
The tmnxIpTnlDstAddrTable contains destination addresses for each IP tunnel in the system. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxIpTnlDstAddrEntry

tmnxIpTnlDstAddrEntry 1.3.6.1.4.1.6527.3.1.2.4.3.144.1
The tmnxIpTnlDstAddrEntry contains information about a single destination address in an IP Tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxIpTnlDstAddrEntry  

tmnxIpTnlDstAddrType 1.3.6.1.4.1.6527.3.1.2.4.3.144.1.1
The value of tmnxIpTnlDstAddrType specifies the address type of address in tmnxIpTnlDstAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxIpTnlDstAddr 1.3.6.1.4.1.6527.3.1.2.4.3.144.1.2
The value of tmnxIpTnlDstAddr specifies the address of the destination of this IP tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16|20)  

tmnxIpTnlDstAddrRowStatus 1.3.6.1.4.1.6527.3.1.2.4.3.144.1.3
The tmnxIpTnlDstAddrRowStatus object is used to create and delete rows in the tmnxIpTnlDstAddrTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxIpTnlDstAddrLastChanged 1.3.6.1.4.1.6527.3.1.2.4.3.144.1.4
The value of tmnxIpTnlDstAddrLastChanged indicates the sysUpTime at the time of the last modification of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxIpTunnelStatsTable 1.3.6.1.4.1.6527.3.1.2.4.3.145
The tmnxIpTunnelStatsTable contains statistics entries per IP tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxIpTunnelStatsEntry

tmnxIpTunnelStatsEntry 1.3.6.1.4.1.6527.3.1.2.4.3.145.1
The tmnxIpTunnelStatsEntry contains statistics information for a single IP Tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxIpTunnelStatsEntry  

tmnxIpTunnelPktsTx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.1
The value of tmnxIpTunnelPktsTx indicates the number of packets this IP Tunnel has sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelPktsTxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.2
The value of tmnxIpTunnelPktsTxLo indicates lower 32 bits of the value of tmnxIpTunnelPktsTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelPktsTxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.3
The value of tmnxIpTunnelPktsTxHi indicates higher 32 bits of the value of tmnxIpTunnelPktsTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelPktsRx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.4
The value of tmnxIpTunnelPktsRx indicates the number of packets this IP Tunnel has received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelPktsRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.5
The value of tmnxIpTunnelPktsRxLo indicates lower 32 bits of the value of tmnxIpTunnelPktsRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelPktsRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.6
The value of tmnxIpTunnelPktsRxHi indicates higher 32 bits of the value of tmnxIpTunnelPktsRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelBytesTx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.7
The value of tmnxIpTunnelBytesTx indicates the number of bytes this IP Tunnel has sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelBytesTxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.8
The value of tmnxIpTunnelBytesTxLo indicates lower 32 bits of the value of tmnxIpTunnelBytesTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelBytesTxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.9
The value of tmnxIpTunnelBytesTxHi indicates higher 32 bits of the value of tmnxIpTunnelBytesTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelBytesRx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.10
The value of tmnxIpTunnelBytesRx indicates the number of bytes this IP Tunnel has received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelBytesRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.11
The value of tmnxIpTunnelBytesRxLo indicates lower 32 bits of the value of tmnxIpTunnelBytesRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelBytesRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.12
The value of tmnxIpTunnelBytesRxHi indicates higher 32 bits of the value of tmnxIpTunnelBytesRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelTxErrors 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.13
The value of tmnxIpTunnelTxErrors indicates the number of packet transmit errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelRxErrors 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.14
The value of tmnxIpTunnelRxErrors indicates the number of packet receive errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelKeyIgnoredRx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.15
The value of tmnxIpTunnelKeyIgnoredRx indicates the number of packets this IP Tunnel received and processed ignoring key field.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelKeyIgnoredRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.16
The value of tmnxIpTunnelKeyIgnoredRxLo indicates lower 32 bits of the value of tmnxIpTunnelKeyIgnoredRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelKeyIgnoredRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.17
The value of tmnxIpTunnelKeyIgnoredRxHi indicates higher 32 bits of the value of tmnxIpTunnelKeyIgnoredRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelSeqIgnoredRx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.18
The value of tmnxIpTunnelSeqIgnoredRx indicates the number of packets this IP Tunnel and processed ignoring sequence field.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelSeqIgnoredRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.19
The value of tmnxIpTunnelSeqIgnoredRxLo indicates lower 32 bits of the value of tmnxIpTunnelSeqIgnoredRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelSeqIgnoredRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.20
The value of tmnxIpTunnelSeqIgnoredRxHi indicates higher 32 bits of the value of tmnxIpTunnelSeqIgnoredRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelVersUnsupRx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.21
The value of tmnxIpTunnelVersUnsupRx indicates the number of packets this IP Tunnel received with unsupported IP version and were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelVersUnsupRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.22
The value of tmnxIpTunnelVersUnsupRxLo indicates lower 32 bits of the value of tmnxIpTunnelVersUnsupRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelVersUnsupRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.23
The value of tmnxIpTunnelVersUnsupRxHi indicates higher 32 bits of the value of tmnxIpTunnelVersUnsupRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelInvalidChksumRx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.24
The value of tmnxIpTunnelInvalidChksumRx indicates the number of packets this IP Tunnel received with invalid checksum and were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelInvalidChksumRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.25
The value of tmnxIpTunnelInvalidChksumRxLo indicates lower 32 bits of the value of tmnxIpTunnelInvalidChksumRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelInvalidChksumRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.26
The value of tmnxIpTunnelInvalidChksumRxHi indicates higher 32 bits of the value of tmnxIpTunnelInvalidChksumRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelLoopsRx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.27
The value of tmnxIpTunnelLoopsRx indicates the number of packets this IP Tunnel received with payload with destination address which could result in a loop and were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelLoopsRxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.28
The value of tmnxIpTunnelLoopsRxLo indicates lower 32 bits of the value of tmnxIpTunnelLoopsRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelLoopsRxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.29
The value of tmnxIpTunnelLoopsRxHi indicates higher 32 bits of the value of tmnxIpTunnelLoopsRx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelTooBigTx 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.30
The value of tmnxIpTunnelTooBigTx indicates the number of packets this IP Tunnel received which were too big to transmit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tmnxIpTunnelTooBigTxLo 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.31
The value of tmnxIpTunnelTooBigTxLo indicates lower 32 bits of the value of tmnxIpTunnelTooBigTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxIpTunnelTooBigTxHi 1.3.6.1.4.1.6527.3.1.2.4.3.145.1.32
The value of tmnxIpTunnelTooBigTxHi indicates higher 32 bits of the value of tmnxIpTunnelTooBigTx object.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

sapCreated 1.3.6.1.4.1.6527.3.1.3.4.3.0.1
This trap is sent when a new row is created in the sapBaseInfoTable.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sapDeleted 1.3.6.1.4.1.6527.3.1.3.4.3.0.2
This trap is sent when an existing row is deleted from the sapBaseInfoTable.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sapStatusChanged 1.3.6.1.4.1.6527.3.1.3.4.3.0.3
The sapStatusChanged notification is generated when there is a change in the administrative or operating status of an SAP. Notice that this trap is not generated whenever the SAP operating status change is caused by an operating status change on the associated access port.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapTlsMacAddrLimitAlarmRaised 1.3.6.1.4.1.6527.3.1.3.4.3.0.4
The trap sapTlsMacAddrLimitAlarmRaised is sent whenever the number of MAC addresses stored in the FDB for this SAP increases to reach the watermark specified by the object svcTlsFdbTableFullHighWatermark.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapTlsMacAddrLimitAlarmCleared 1.3.6.1.4.1.6527.3.1.3.4.3.0.5
The trap sapTlsMacAddrLimitAlarmCleared is sent whenever the number of MAC addresses stored in the FDB for this SAP drops to the watermark specified by the object svcTlsFdbTableFullLowWatermark.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapTlsDHCPLseStEntriesExceeded 1.3.6.1.4.1.6527.3.1.3.4.3.0.6
The sapTlsDHCPLseStEntriesExceeded notification is generated when the number of DHCP lease states entries on a given SAP reaches a user configurable upper limit given by sapTlsDhcpLeasePopulate.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sapTlsDHCPLeaseStateOverride 1.3.6.1.4.1.6527.3.1.3.4.3.0.7
The sapTlsDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sapTlsDHCPSuspiciousPcktRcvd 1.3.6.1.4.1.6527.3.1.3.4.3.0.8
The sapTlsDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sapDHCPLeaseEntriesExceeded 1.3.6.1.4.1.6527.3.1.3.4.3.0.9
The sapDHCPLeaseEntriesExceeded notification is generated when the number of DHCP lease state entries on a given SAP reaches a user configurable upper limit. This limit is given by sapTlsDhcpLeasePopulate for a TLS service and by TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate for an IES or VPRN service.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapDHCPLseStateOverride 1.3.6.1.4.1.6527.3.1.3.4.3.0.10
The sapDHCPLseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapDHCPSuspiciousPcktRcvd 1.3.6.1.4.1.6527.3.1.3.4.3.0.11
The sapDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapDHCPLseStatePopulateErr 1.3.6.1.4.1.6527.3.1.3.4.3.0.12
The sapDHCPLseStatePopulateErr notification indicates that the system was unable to update the DHCP Lease State table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded.
Status: current Access: read-only
NOTIFICATION-TYPE    

hostConnectivityLost 1.3.6.1.4.1.6527.3.1.3.4.3.0.13
The hostConnectivityLost notification indicates that the system lost the connectivity with the indicated host.
Status: current Access: read-only
NOTIFICATION-TYPE    

hostConnectivityRestored 1.3.6.1.4.1.6527.3.1.3.4.3.0.14
The hostConnectivityRestored notification indicates that the system has restored the connectivity with the indicated host.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapReceivedProtSrcMac 1.3.6.1.4.1.6527.3.1.3.4.3.0.15
The sapReceivedProtSrcMac notification is generated when a protected source MAC is received on a TLS SAP with sapTlsRestProtSrcMac 'true', or if the TLS SAP belongs to an SHG with tlsShgRestProtSrcMac 'true'.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapStaticHostDynMacConflict 1.3.6.1.4.1.6527.3.1.3.4.3.0.16
The sapStaticHostDynMacConflict notification indicates that the system is trying to learn a conflicting IP-only static host dynamic MAC address (sapStaticHostDynMacAddress).
Status: current Access: read-only
NOTIFICATION-TYPE    

sapTlsMacMoveExceeded 1.3.6.1.4.1.6527.3.1.3.4.3.0.17
The sapTlsMacMoveExceeded notification is generated when the SAP exceeds the TLS svcTlsMacMoveMaxRate.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapDHCPProxyServerError 1.3.6.1.4.1.6527.3.1.3.4.3.0.18
The sapDHCPProxyServerError notification indicates that the system was unable to proxy DHCP requests.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapDHCPCoAError 1.3.6.1.4.1.6527.3.1.3.4.3.0.19
The sapDHCPCoAError notification indicates that the system was unable to process a Change of Authorization (CoA) request from a Radius server.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sapDHCPSubAuthError 1.3.6.1.4.1.6527.3.1.3.4.3.0.20
The sapDHCPSubAuthError notification indicates that the system encountered a problem while trying to authenticate a subscriber.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sapPortStateChangeProcessed 1.3.6.1.4.1.6527.3.1.3.4.3.0.21
The sapPortStateChangeProcessed notification indicates that the agent has finished processing an access port state change event, and that the operating status of all the affected SAP's has been updated accordingly. The value of the sapNotifyPortId object indicates the ID of the port that experienced the state change.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapDHCPLseStateMobilityError 1.3.6.1.4.1.6527.3.1.3.4.3.0.22
The sapDHCPLseStateMobilityError notification indicates that the system was unable to perform a mobility check for this lease state.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapCemPacketDefectAlarm 1.3.6.1.4.1.6527.3.1.3.4.3.0.23
Generated when a CEM SAP alarm condition is detected. It is generated only when the packet error indicated by 'sapCemReportAlarmStatus' persists over a 3 second window. tmnxPortCemStatsReportAlarm specifies, in the case of APS Ports, the physical port raising the trap, otherwise it is the SAP's port.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapCemPacketDefectAlarmClear 1.3.6.1.4.1.6527.3.1.3.4.3.0.24
Generated when a CEM SAP alarm condition is cleared. It is generated only when the packet error indicated by 'sapCemReportAlarmStatus' no longer persists over a 10 second window. tmnxPortCemStatsReportAlarm specifies, in the case of APS Ports, the physical port raising the trap, otherwise it is the SAP's port.
Status: current Access: read-only
NOTIFICATION-TYPE    

msapStateChanged 1.3.6.1.4.1.6527.3.1.3.4.3.0.25
The msapStateChanged notification is generated when a Managed SAP is 'created', 'modified', or 'deleted', with the value of msapStatus indicated which state it has entered.
Status: current Access: read-only
NOTIFICATION-TYPE    

msapCreationFailure 1.3.6.1.4.1.6527.3.1.3.4.3.0.26
The trap msapCreationFailure is sent whenever the system fails to create a managed SAP. The svcId, svcVpnId, sapPortId and sapEncapValue are those of the capturing SAP. The values of sapNotifyPortId and sapNotifyEncapValue correspond to the managed SAP, and the value of sapTlsNotifyMacAddr is the MAC address that would have been associated with the managed SAP, if the creation would have succeeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapHostBGPPeeringSetupFailed 1.3.6.1.4.1.6527.3.1.3.4.3.0.27
The sapHostBGPPeeringSetupFailed notification indicates that the system was unable to create a BGP neighbor and set up BGP peering for the given host.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapTlsDataSapInstStatusChgd 1.3.6.1.4.1.6527.3.1.3.4.3.0.28
The sapTlsDataSapInstStatusChgd notification is generated when there is a change in the value of sapTlsDataSapInstStatus object. sapTlsDataSapInstLastErr provides information related to sapTlsDataSapInstStatus object.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxGreTunnelOperRemIpChg 1.3.6.1.4.1.6527.3.1.3.4.3.0.29
[CAUSE] The tmnxGreTunnelOperRemIpChg notification is generated when there is a change in operational remote address 'tmnxGreTunnelOperRemIpAddr' of the tunnel. [EFFECT] Operational state of the tunnel is not affected. [RECOVERY] Operator needs to look at the configuration of tmnxGreTunnelRemIpAddr and tmnxGreTunnelBackupRemIpAddr.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapTunnelStateChange 1.3.6.1.4.1.6527.3.1.3.4.3.0.30
[CAUSE] The sapTunnelStateChange notification is generated when IPsec/GRE tunnel indicated by sapTunnelNotifyName changes state to 'down' due to sapTunnelNotifyReason. [EFFECT] IPsec/GRE tunnel associated with the SAP will remain in this state until a corrective action is taken. [RECOVERY] Depending on the reason indicated by sapTunnelNotifyReason, corrective action should be taken.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapAtmPppSessionFailure 1.3.6.1.4.1.6527.3.1.3.4.3.0.31
[CAUSE] The sapAtmPppSessionFailure notification indicates that the system could not create a new PPPoA session. The problem is described in the object sapNotifyReason. The PPP user name is specified in the sapNotifyName. [EFFECT] The user that attempted to set up the PPP session cannot establish the desired connection. [RECOVERY] Depending on the reason indicated by sapNotifyReason, corrective action may be necessary. However, it is possible that the failure is caused by the user's equipment configuration or by erroneous input by the user.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapAtmPppNcpFailure 1.3.6.1.4.1.6527.3.1.3.4.3.0.32
[CAUSE] The sapAtmPppNcpFailure notification indicates that there is a NCP phase setup problem. The problem is described in the object sapNotifyReason. The PPP user name is specified in the sapNotifyName. [EFFECT] The IP protocol cannot be configured for the user that attempted to set up the PPP session. [RECOVERY] Depending on the reason indicated by sapNotifyReason, corrective action may be necessary. However, it is possible that the failure is caused by the user's equipment configuration or by erroneous input by the user.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapIpipeCeIpAddrChange 1.3.6.1.4.1.6527.3.1.3.4.3.0.33
[CAUSE] The sapIpipeCeIpAddrChange notification indicates that an IP address has been discovered for the local end host of a specified IPIPE SAP. The IP address type is specified by sapIpipeCeIpAddrType. The IP address is specified by sapIpipeCeIpAddress. [EFFECT] The IP address specified by sapIpipeCeIpAddress and of type sapIpipeCeIpAddrType has been discovered for the local end host. [RECOVERY] No action is required
Status: current Access: read-only
NOTIFICATION-TYPE    

topologyChangeSapMajorState 1.3.6.1.4.1.6527.3.1.3.4.5.0.1
The topologyChangeSapMajorState notification is generated when a SAP has transitioned its state from learning to forwarding or from forwarding to blocking or broken. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss.
Status: current Access: read-only
NOTIFICATION-TYPE    

newRootSap 1.3.6.1.4.1.6527.3.1.3.4.5.0.2
The newRootSap notification is generated when the previous root bridge has been aged out and a new root bridge has been elected. A new root bridge creates a new spanning tree topology and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss.
Status: current Access: read-only
NOTIFICATION-TYPE    

topologyChangeSapState 1.3.6.1.4.1.6527.3.1.3.4.5.0.5
The topologyChangeSapState notification is generated when a SAP has transitioned state to blocking or broken from a state other than forwarding. This event complements what is not covered by topologyChangeSapMajorState. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss.
Status: current Access: read-only
NOTIFICATION-TYPE    

receivedTCN 1.3.6.1.4.1.6527.3.1.3.4.5.0.6
The receivedTCN notification is generated when a SAP has received TCN from another bridge. This bridge will either have its configured BPDU with the topology change flag set if it is a root bridge, or it will pass TCN to its root bridge. Eventually the address aging timer for the forwarding database will be made shorter for a short period of time. No recovery is needed.
Status: current Access: read-only
NOTIFICATION-TYPE    

higherPriorityBridge 1.3.6.1.4.1.6527.3.1.3.4.5.0.9
The higherPriorityBridge notification is generated when a customer's device has been configured with a bridge priority equal to zero. The SAP that the customer's device is connected through will be blocked. Remove the customer's device or reconfigure the customer's bridge priority with a value greater than zero.
Status: current Access: read-only
NOTIFICATION-TYPE    

bridgedTLS 1.3.6.1.4.1.6527.3.1.3.4.5.0.10
The bridgedTLS notification is generated when a configuration BPDU has been received that identifies that another TLS with a different VPNID is attempting to bridge with this TLS. At least one ESR participating within one of the TLS that is locally connected must have an active VCP for this to be seen. The SAP that the configuration BPDU is received on will be blocked to prevent the TLS to TLS bridging. Reconfigure the bridged TLS into a single TLS or remove the connectivity.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sapEncapPVST 1.3.6.1.4.1.6527.3.1.3.4.5.0.11
The sapEncapPVST notification is generated when the SAP receives a BPDU that is PVST encapsulated, after having received BPDUs that were 802.d encapsulated. The SAP BPDUs will also be PVST encapsulated. No recovery is needed.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapEncapDot1d 1.3.6.1.4.1.6527.3.1.3.4.5.0.12
The sapEncapDot1d notification is generated when the SAP receives a BPDU that is 802.1d encapsulated after having received BPDUs that were PVST encapsulated. The SAP BPDUs will also be 802.1d encapsulated. No recovery is needed.
Status: current Access: read-only
NOTIFICATION-TYPE    

sapReceiveOwnBpdu 1.3.6.1.4.1.6527.3.1.3.4.5.0.13
The sapReceiveOwnBpdu notification is generated when the SAP STP received it's own BPDU.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

sapActiveProtocolChange 1.3.6.1.4.1.6527.3.1.3.4.5.0.30
The sapActiveProtocolChange notification is generated when the spanning tree protocol on this SAP changes from rstp to stp or vise versa. No recovery is needed.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxStpRootGuardViolation 1.3.6.1.4.1.6527.3.1.3.4.5.0.35
The tmnxStpRootGuardViolation notification is generated when a SAP which has root-guard configured is trying to become root (has a better STP priority vector). The SAP will become alternate and traffic will be blocked.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxSapStpExcepCondStateChng 1.3.6.1.4.1.6527.3.1.3.4.5.0.37
The tmnxSapStpExcepCondStateChng notification is generated when the value of the object sapTlsStpException has changed, i.e. when the exception condition changes on the indicated SAP.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxIpTunnelOperRemIpChg 1.3.6.1.4.1.6527.3.1.3.4.3.0.38
[CAUSE] The tmnxIpTunnelOperRemIpChg notification is generated when there is a change in operational remote address 'tmnxIpTunnelOperRemIpAddr' of the tunnel. [EFFECT] Operational state of the tunnel is not affected. [RECOVERY] Operator needs to look at the configuration of tmnxIpTunnelRemIpAddr and tmnxIpTunnelBackupRemIpAddr.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxSapCompliances 1.3.6.1.4.1.6527.3.1.1.4.3.1
OBJECT IDENTIFIER    

tmnxSapGroups 1.3.6.1.4.1.6527.3.1.1.4.3.2
OBJECT IDENTIFIER    

tmnxSap7450V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.100
The compliance statement for management of services SAPs on Alcatel-Lucent 7450 ESS series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7750V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.101
The compliance statement for management of services SAPs on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7710V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.102
The compliance statement for management of services SAPs on Alcatel-Lucent 7710 SR series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7450V6v1Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.103
The compliance statement for management of services SAPs on Alcatel-Lucent-Lucent 7450 ESS series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7750V6v1Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.104
The compliance statement for management of services SAPs on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7710V6v1Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.105
The compliance statement for management of services SAPs on Alcatel-Lucent 7710 SR series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7450V7v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.106
The compliance statement for management of services SAPs on Alcatel-Lucent 7450 ESS series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7750V7v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.107
The compliance statement for management of services SAPs on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7710V7v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.108
The compliance statement for management of services SAPs on Alcatel-Lucent 7710 SR series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7450V8v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.109
The compliance statement for management of services SAPs on Alcatel-Lucent 7450 ESS series systems release 8.0 .
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7750V8v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.110
The compliance statement for management of services SAPs on Alcatel-Lucent SROS series systems release 8.0 .
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7710V8v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.111
The compliance statement for management of services SAPs on Alcatel-Lucent 7710 SR series systems release 8.0 .
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7450V9v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.112
The compliance statement for management of services SAPs on Alcatel-Lucent 7450 ESS series systems release 9.0 .
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7750V9v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.113
The compliance statement for management of services SAPs on Alcatel-Lucent SROS series systems release 9.0 .
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7710V9v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.114
The compliance statement for management of services SAPs on Alcatel-Lucent 7710 SR series systems release 9.0 .
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxSap7450V10v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.115
The compliance statement for management of services SAPs on Alcatel-Lucent 7450 ESS series systems release 10.0 .
Status: current Access: read-only
MODULE-COMPLIANCE    

tmnxSap7750V10v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.116
The compliance statement for management of services SAPs on Alcatel-Lucent SROS series systems release 10.0 .
Status: current Access: read-only
MODULE-COMPLIANCE    

tmnxSap7710V10v0Compliance 1.3.6.1.4.1.6527.3.1.1.4.3.1.117
The compliance statement for management of services SAPs on Alcatel-Lucent 7710 SR series systems release 10.0 .
Status: current Access: read-only
MODULE-COMPLIANCE    

tmnxSapV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.100
The group of objects supporting management of SAP general capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapTlsV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.101
The group of objects supporting management of SAP TLS capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapAtmV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.102
The group of objects supporting management of SAP ATM capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapBaseV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.103
The group of objects supporting management of SAP Base capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapQosV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.104
The group of objects supporting management of SAP Ingress/Egress QoS capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapStaticHostV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.105
The group of objects supporting management of SAP static host capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapStaticHostV6v1Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.121
The group of objects supporting management of SAP static host capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapDhcpV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.106
The group of objects supporting management of SAP TLS DHCP capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapPortIdV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.107
The group of objects supporting management of SAP Port ID capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapSubMgmtV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.108
The group of objects supporting management of SAP Sub-management capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapMstiV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.109
The group of objects supporting management of SAP TLS MSTI capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapIppipeV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.110
The group of objects supporting management of SAP I-Pipe capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapPolicyV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.111
The group of objects supporting management of SAP ingress/egress capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapCemV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.112
The group of objects supporting management of SAP Cem capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapL2ptV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.113
The group of objects supporting management of SAP TLS L2pt capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapMsapV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.114
The group of objects supporting management of managed SAP capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapMrpV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.115
The group of objects supporting management of SAP MRP capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapHsmdaV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.116
The group of objects supporting management of SAP Ingress/Egress QoS Hsmda capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxTlsMsapPppoeV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.117
The group of objects supporting PPPOE on Managed SAPs feature on the Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapIpV6FilterV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.118
The group of objects supporting management of SAP Ingress Policy capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapBsxV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.119
The group of objects supporting management of BSX (Application Assurance) capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapMsapV6v1Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.120
The group of objects supporting management of managed SAP L3 capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapTlsV6v1Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.122
The group of objects supporting management of SAP TLS capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapArpHostGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.123
The group of objects supporting management of ARP hosts' capabilities for SAP's on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapV7v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.124
The group of objects supporting management of SAP general capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapIgmpTrkGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.125
The group of objects supporting management of IGMP host tracking capabilities for SAP's on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapFrGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.126
The group of objects supporting management of SAP FR capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapIpipeV7v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.127
The group of objects supporting management of SAP IPIPE capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapBsxV7v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.128
The group of objects supporting management of BSX (Application Assurance) capabilities on Alcatel-Lucent SROS series systems in release R7.0
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapTlsV7v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.137
The group of objects supporting management of SAP TLS capabilities on Alcatel-Lucent SROS series systems added in release 7.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapRadiusFallbackGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.129
The group of objects supporting management of RADIUS fallback capabilities for SAP's on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapPbbGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.130
The group of objects supporting management of Provider Backbone Bridging (PBB/IEEE 802.1ah) capabilities for SAP's on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapFrGroupV8v0 1.3.6.1.4.1.6527.3.1.1.4.3.2.131
The group of objects supporting management of SAP FR capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapTlsV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.132
The group of objects supporting management of SAP TLS capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapDhcpV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.133
The group of objects supporting management of SAP TLS DHCP capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.134
The group of objects supporting management of SAP general capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapFPropBMacV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.135
The group of objects supporting management of SAP fault propagation BMac addresses on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapPlcrV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.136
The group of objects supporting management of SAP Policer on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapSubMgmtV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.138
The group of objects supporting management of SAP Sub-management capabilities on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapMsapV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.139
The group of objects supporting management of managed SAP capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapQosV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.140
The group of objects supporting management of SAP Ingress/Egress QoS capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapMrpV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.141
The group of objects supporting management of SAP MRP capabilities on release 8.0 of Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapMvrpV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.142
The group of objects supporting management of SAP MVRP capabilities on release 8.0R4 of Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapIpipeV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.143
The group of objects supporting management of SAP IPIPE capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapEthRingGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.144
The group of objects supporting management of SAP ETH-RING capabilities on Alcatel SROS systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapOverrideV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.145
The group of objects supporting management of SAP override capabilities on release 8.0R4 of Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.146
The group of objects supporting management of SAP general capabilities on release 9.0 of Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapAtmV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.147
The group of objects supporting management of SAP ATM capabilities that were added in release 9.0 of Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapEthCfmMonitorGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.148
The group of objects supporting management of SAP Ethernet Connectivity Fault Management Monitoring capabilities on release 8.0 R4 of Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapGreGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.149
The group of objects supporting management of SAP GRE specific capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapIgmpTrkV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.150
The group of objects supporting management of IGMP host tracking capabilities for SAP's on release 8.0 Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapBsxV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.151
The group of objects supporting management of BSX (Application Assurance) SAP capabilities on Alcatel-Lucent SROS series systems in release 9.0
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapMsapV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.152
The group of objects supporting management of managed SAP capabilities on Alcatel-Lucent SROS series systems added in release 9.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapOverrideV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.153
The group of objects supporting management of SAP override capabilities on Alcatel-Lucent SROS series systems added in release 9.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapPlcrV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.154
The group of objects supporting management of SAP Policer on Alcatel-Lucent SROS series systems in release 9.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapEgrEncapGrpV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.155
The group of objects supporting management of SAP encapsulation group on Alcatel-Lucent SROS series systems in release 9.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapStaticHostV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.156
The group of objects supporting management of SAP static host capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapSubMgmtV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.157
The group of objects supporting management of SAP Sub-management capabilities on Alcatel-Lucent SROS series 9.x systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapHsmdaV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.158
The group of objects supporting management of SAP Egress QOS Hsmda capabilities on Alcatel-Lucent SROS series systems release 9.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapDefHostV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.159
The group of objects supporting management of Default Host SAP capabilities on Alcatel-Lucent SROS series 9.x systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapFilterProfileV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.160
The group of objects supporting management of SAP Filter Profiles on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapV10v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.161
The group of objects supporting management of SAP general capabilities on release 10.0 of Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapBsxV10v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.162
The group of objects supporting management of BSX (Application Assurance) SAP capabilities on Alcatel-Lucent SROS series systems in release 10.0
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapNotificationObjV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.200
The group of objects supporting management of notifications on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapNotificationObjV7v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.201
The group of objects supporting management of notifications on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapNotifyObjsV8v0R5Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.202
The group of objects supporting management of notifications on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapNotificationObjV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.203
The group of notification objects added in release 9.0 of Alcatel-Lucent SROS.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapIpipeNotifyObjsGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.204
The group of objects supporting management of notifications for Ipipes on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapObsoletedV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.300
The group of obsolete objects for the services feature on Alcatel-Lucent SROS series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxSapObsoletedV7v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.301
The group of obsolete objects on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapObsoletedV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.302
The group of obsolete objects on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapNotifyGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.400
The group of notifications for the Sap feature on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxSapCemNotificationV6v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.401
The group of notifications supporting the CEM Sap feature on Alcatel-Lucent 7710 SR series systems.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxSapObsoletedNotifyGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.402
The group of obsolete notifications for the Sap feature on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxSapMvrpNotificationV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.403
The group of notifications supporting the MVRP Sap feature on Alcatel-Lucent 7710 SR series systems.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxSapNotificationV8v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.404
The group of notifications supporting the additional SAP feature on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxSapEthCfmGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.405
The group of objects supporting Ethernet Connectivity Fault Management (CFM) for the SAP feature on Alcatel-Lucent SROS series systems for release 9.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapNotificationV9v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.406
The group of SAP notifications added in release 9.0 of Alcatel-Lucent SROS series system.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxSapIpipeNotificationGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.407
The group of Ipipe SAP notifications for added in the Alcatel-Lucent SROS series system.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxSapSpbGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.408
The group of objects supporting Shortest Path Bridging (SPB) for the SAP feature on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapMonitorIPGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.409
The group of objects supporting per-source, per-SAP IP monitoring on Alcatel-Lucent SROS series release 9.0 systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapIpTnlGroup 1.3.6.1.4.1.6527.3.1.1.4.3.2.411
The group of objects supporting SAP IP Tunnel feature on Alcatel-Lucent SROS series release 10.0 systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapGreV10v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.412
The group of additional objects supporting SAP feature on Alcatel-Lucent SROS series release 10.0 systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapNotificationV10v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.413
The group of notifications supporting the additional SAP feature on Alcatel-Lucent SROS series systems.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxSapHsmdaV10v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.414
The group of objects supporting management of SAP Ingress/Egress QoS Hsmda capabilities on Alcatel-Lucent SROS series systems in 10.0 release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapObsoletedV10v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.415
The group of obsolete objects on Alcatel-Lucent SROS series systems in 10.0 release.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapMvrpV10v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.417
The group of objects supporting management of SAP MVRP capabilities on release 10.0 of Alcatel-Lucent SROS series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxSapStatsV10v0Group 1.3.6.1.4.1.6527.3.1.1.4.3.2.423
The group of additional objects supporting SAP stats feature on Alcatel-Lucent SROS series release 10.0 systems.
Status: current Access: read-only
OBJECT-GROUP