TIMETRA-VRTR-MIB

File: TIMETRA-VRTR-MIB.mib (892972 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IANA-RTPROTO-MIB INET-ADDRESS-MIB IF-MIB
IP-FORWARD-MIB IP-MIB TIMETRA-TC-MIB
TIMETRA-GLOBAL-MIB TIMETRA-FILTER-MIB TIMETRA-CHASSIS-MIB
TIMETRA-PORT-MIB TIMETRA-SERV-MIB TIMETRA-SAP-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 IpAddress TimeTicks
Integer32 Gauge32 Counter32
Counter64 MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP TEXTUAL-CONVENTION DisplayString
RowStatus TruthValue MacAddress
TimeStamp TimeInterval TestAndIncr
IANAipRouteProtocol InetAutonomousSystemNumber InetAddress
InetAddressType InetAddressPrefixLength InetAddressIPv6z
InetAddressIPv6 InetAddressIPv4 InterfaceIndex
InterfaceIndexOrZero inetCidrRouteDestType inetCidrRouteDest
inetCidrRoutePfxLen inetCidrRoutePolicy inetCidrRouteProto
inetCidrRouteNextHopType inetCidrRouteNextHop ipCidrRouteEntry
inetCidrRouteEntry ipNetToMediaEntry ipNetToPhysicalEntry
TmnxVRtrID IpAddressPrefixLength TmnxBgpAutonomousSystem
TmnxVRtrIDOrZero TmnxAdminState TmnxOperState
TmnxStatus TmnxPortID TmnxEncapVal
TNamedItem TNamedItemOrEmpty TItemDescription
TPIRRate TCIRRate TItemLongDescription
TmnxServId TmnxCustId TmnxTunnelType
TmnxTunnelID TPolicyStatementNameOrEmpty TmnxVPNRouteDistinguisher
TCpmProtPolicyID TDSCPValue TDSCPValueOrNone
TFCType TmnxDHCP6MsgType Dot1PPriority
TNetworkPolicyID TmnxEnabledDisabled TmnxPwGlobalIdOrZero
TFCNameOrEmpty TPriority TmnxReasContextVal
TPriorityOrUndefined TQosQGrpInstanceIDorZero TmnxMplsTpNodeID
TmnxMplsTpGlobalID TmnxVpnIpBackupFamily timetraSRMIBModules
tmnxSRObjs tmnxSRNotifyPrefix tmnxSRConfs
TDHCPFilterID TIPFilterID TFilterID
tmnxChassisIndex tmnxCardSlotNum TmnxSlotNum
tmnxPortNotifyPortId tmnxPortType svcDhcpLseStateNewCiAddr
svcDhcpLseStateNewChAddr svcDhcpClientLease sapPortId
sapEncapValue

Defined Types

TmnxVPNId  
The purpose of a VPN-ID is to identify a VPN. The global VPN Identifier format is: 3-octet VPN Authority, organizationally unique ID followed by a 4-octet VPN index identifying the VPN according to OUI.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..7)  

TmnxInetAddrState  
The TmnxInetAddrState is the state of an ipv6 address.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), tentative(1), duplicated(2), inaccessible(3), deprecated(4), preferred(5)  

TDSCPAppId  
DSCP Application identifiers for protocols that generate control traffic on the the Alcatel-Lucent SROS router.
TEXTUAL-CONVENTION    
  INTEGER bgp(1), cflowd(2), dhcp(3), dns(4), ftp(5), icmp(6), igmp(7), l2tp(8), ldp(9), mld(10), msdp(11), ndis(12), ntp(13), ospf(14), pim(15), radius(16), rip(17), rsvp(18), snmp(19), snmp-notification(20), srrp(21), ssh(22), syslog(23), tacplus(24), telnet(25), tftp(26), traceroute(27), vrrp(28), ptp(29), igmp-reporter(30), gtp(31)  

TDot1pAppId  
IEEE 802.1p priority (Dot1p) Application identifiers for Layer-2 protocols that generate control traffic on the the Alcatel-Lucent SROS router.
TEXTUAL-CONVENTION    
  INTEGER arp(1), isis(2), pppoe(3)  

TmnxVrtrSingleSfmOverloadState  
The TmnxVrtrSingleSfmOverloadState data type is an enumerated integer that describes the values used to identify the IGP single-SFM-overload state (SFM:Switch-Fabric/Control Processor Module). notApplicable : the IGP overload reaction to the single-SFM condition is disabled; normal : the full system multicast capacity of a dual-SFM chassis is available; overload : only reduced system multicast capacity is available, and IGP protocols are in overload.
TEXTUAL-CONVENTION    
  INTEGER notApplicable(0), normal(1), overload(2)  

TmnxInetCidrNextHopType  
The TmnxInetCidrNextHopType is the type of next hop for a route. regular : Next hop is an IPv4 destination address for an IPv4 prefix or and IPv6 destination address for and IPv6 prefix. tunneled : Next hop refers to a LDP/RSVP/GRE tunnel for IPv4 prefix. sixOverMPLS : Next hop is a MPLS tunnel for IPv6 prefix. sixOverFour : Next hop is a IPv4 destination for IPv6 prefix.
TEXTUAL-CONVENTION    
  INTEGER regular(1), tunneled(2), sixOverMPLS(3), sixOverFour(4)  

TmnxInetCidrNextHopOwner  
The TmnxInetCidrNextHopOwner is the owner of the next hop for a route. unknown : Next hop owner is unknown. rsvp : Next hop owner is RSVP. ldp : Next hop owner is LDP. ldpOverRsvp : Next hop owner is LDP over RSVP.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), rsvp(1), ldp(2), ldpOverRsvp(3)  

TmnxL3RouteOwner  
The TmnxL3RouteOwner is the owner of the next hop for a Layer 3 route.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), local(1), host(2), static(5), bgp(16)  

VRtrConfEntry  
SEQUENCE    
  vRtrID TmnxVRtrID
  vRtrRowStatus RowStatus
  vRtrAdminState TmnxAdminState
  vRtrName TNamedItemOrEmpty
  vRtrMaxNumRoutes Integer32
  vRtrBgpStatus TmnxStatus
  vRtrMplsStatus TmnxStatus
  vRtrOspfStatus TmnxStatus
  vRtrRipStatus TmnxStatus
  vRtrRsvpStatus TmnxStatus
  vRtrEcmpMaxRoutes Unsigned32
  vRtrAS TmnxBgpAutonomousSystem
  vRtrNewIfIndex TestAndIncr
  vRtrLdpStatus TmnxStatus
  vRtrIsIsStatus TmnxStatus
  vRtrRouterId IpAddress
  vRtrTriggeredPolicy TruthValue
  vRtrConfederationAS TmnxBgpAutonomousSystem
  vRtrRouteDistinguisher TmnxVPNRouteDistinguisher
  vRtrMidRouteThreshold Unsigned32
  vRtrHighRouteThreshold Unsigned32
  vRtrIllegalLabelThreshold Unsigned32
  vRtrVpnId TmnxVPNId
  vRtrDescription TItemDescription
  vRtrGracefulRestart TruthValue
  vRtrGracefulRestartType INTEGER
  vRtrType INTEGER
  vRtrServiceId TmnxServId
  vRtrCustId TmnxCustId
  vRtrIgmpStatus TmnxStatus
  vRtrMaxNumRoutesLogOnly TruthValue
  vRtrVrfTarget TNamedItemOrEmpty
  vRtrVrfExportTarget TNamedItemOrEmpty
  vRtrVrfImportTarget TNamedItemOrEmpty
  vRtrPimStatus TmnxStatus
  vRtrMaxMcastNumRoutes Integer32
  vRtrMaxMcastNumRoutesLogOnly TruthValue
  vRtrMcastMidRouteThreshold Unsigned32
  vRtrIgnoreIcmpRedirect TruthValue
  vRtrOspfv3Status TmnxStatus
  vRtrMsdpStatus TmnxStatus
  vRtrVprnType INTEGER
  vRtrSecondaryVrfId TmnxVRtrIDOrZero
  vRtrMldStatus TmnxStatus
  vRtrIPv6MaxNumRoutes Integer32
  vRtrIPv6MidRouteThreshold Unsigned32
  vRtrIPv6HighRouteThreshold Unsigned32
  vRtrIPv6MaxNumRoutesLogOnly TruthValue
  vRtrIPv6IgnoreIcmpRedirect TruthValue
  vRtrMcPathMgmtPlcyName TNamedItem
  vRtrIgnoreNextHopMetric TruthValue
  vRtrMvpnVrfTarget TNamedItemOrEmpty
  vRtrMvpnVrfExportTarget TNamedItemOrEmpty
  vRtrMvpnVrfImportTarget TNamedItemOrEmpty
  vRtrMvpnVrfTargetUnicast TruthValue
  vRtrMvpnVrfExportTargetUnicast TruthValue
  vRtrMvpnVrfImportTargetUnicast TruthValue
  vRtrAS4Byte InetAutonomousSystemNumber
  vRtrConfederationAS4Byte InetAutonomousSystemNumber
  vRtrMvpnCMcastImportRT TNamedItemOrEmpty
  vRtrInterASMvpn TruthValue

VRtrPolicyEntry  
SEQUENCE    
  vRtrImportPolicy1 TPolicyStatementNameOrEmpty
  vRtrImportPolicy2 TPolicyStatementNameOrEmpty
  vRtrImportPolicy3 TPolicyStatementNameOrEmpty
  vRtrImportPolicy4 TPolicyStatementNameOrEmpty
  vRtrImportPolicy5 TPolicyStatementNameOrEmpty
  vRtrExportPolicy1 TPolicyStatementNameOrEmpty
  vRtrExportPolicy2 TPolicyStatementNameOrEmpty
  vRtrExportPolicy3 TPolicyStatementNameOrEmpty
  vRtrExportPolicy4 TPolicyStatementNameOrEmpty
  vRtrExportPolicy5 TPolicyStatementNameOrEmpty
  vRtrMvpnImportPolicy1 TPolicyStatementNameOrEmpty
  vRtrMvpnImportPolicy2 TPolicyStatementNameOrEmpty
  vRtrMvpnImportPolicy3 TPolicyStatementNameOrEmpty
  vRtrMvpnImportPolicy4 TPolicyStatementNameOrEmpty
  vRtrMvpnImportPolicy5 TPolicyStatementNameOrEmpty
  vRtrMvpnExportPolicy1 TPolicyStatementNameOrEmpty
  vRtrMvpnExportPolicy2 TPolicyStatementNameOrEmpty
  vRtrMvpnExportPolicy3 TPolicyStatementNameOrEmpty
  vRtrMvpnExportPolicy4 TPolicyStatementNameOrEmpty
  vRtrMvpnExportPolicy5 TPolicyStatementNameOrEmpty
  vRtrMvpnImportPolicyUnicast TruthValue
  vRtrMvpnExportPolicyUnicast TruthValue
  vRtrGrtMaxExportRoutes Unsigned32
  vRtrGrtExportPolicy1 TPolicyStatementNameOrEmpty
  vRtrGrtExportPolicy2 TPolicyStatementNameOrEmpty
  vRtrGrtExportPolicy3 TPolicyStatementNameOrEmpty
  vRtrGrtExportPolicy4 TPolicyStatementNameOrEmpty
  vRtrGrtExportPolicy5 TPolicyStatementNameOrEmpty
  vRtrGrtMaxIpv6ExportRoutes Unsigned32

VRtrStatEntry  
SEQUENCE    
  vRtrOperState TmnxOperState
  vRtrDirectRoutes Gauge32
  vRtrDirectActiveRoutes Gauge32
  vRtrStaticRoutes Gauge32
  vRtrStaticActiveRoutes Gauge32
  vRtrOSPFRoutes Gauge32
  vRtrOSPFActiveRoutes Gauge32
  vRtrBGPRoutes Gauge32
  vRtrBGPActiveRoutes Gauge32
  vRtrISISRoutes Gauge32
  vRtrISISActiveRoutes Gauge32
  vRtrRIPRoutes Gauge32
  vRtrRIPActiveRoutes Gauge32
  vRtrAggregateRoutes Gauge32
  vRtrAggregateActiveRoutes Gauge32
  vRtrStatConfiguredIfs Gauge32
  vRtrStatActiveIfs Gauge32
  vRtrStatIllegalLabels Counter32
  vRtrStatCurrNumRoutes Gauge32
  vRtrStatBGPVpnRoutes Gauge32
  vRtrStatBGPVpnActiveRoutes Gauge32
  vRtrStatTotalLdpTunnels Gauge32
  vRtrStatTotalSdpTunnels Gauge32
  vRtrStatActiveLdpTunnels Gauge32
  vRtrStatActiveSdpTunnels Gauge32
  vRtrMulticastRoutes Gauge32
  vRtrStatActiveARPEntries Gauge32
  vRtrStatTotalARPEntries Gauge32
  vRtrV6DirectRoutes Gauge32
  vRtrV6DirectActiveRoutes Gauge32
  vRtrV6StaticRoutes Gauge32
  vRtrV6StaticActiveRoutes Gauge32
  vRtrV6OSPFRoutes Gauge32
  vRtrV6OSPFActiveRoutes Gauge32
  vRtrV6BGPRoutes Gauge32
  vRtrV6BGPActiveRoutes Gauge32
  vRtrV6ISISRoutes Gauge32
  vRtrV6ISISActiveRoutes Gauge32
  vRtrV6RIPRoutes Gauge32
  vRtrV6RIPActiveRoutes Gauge32
  vRtrV6AggregateRoutes Gauge32
  vRtrV6AggregateActiveRoutes Gauge32
  vRtrV6StatConfiguredIfs Gauge32
  vRtrV6StatActiveIfs Gauge32
  vRtrV6StatIllegalLabels Counter32
  vRtrV6StatCurrNumRoutes Gauge32
  vRtrV6StatBGPVpnRoutes Gauge32
  vRtrV6StatBGPVpnActiveRoutes Gauge32
  vRtrV6StatTotalLdpTunnels Gauge32
  vRtrV6StatTotalSdpTunnels Gauge32
  vRtrV6StatActiveLdpTunnels Gauge32
  vRtrV6StatActiveSdpTunnels Gauge32
  vRtrV6MulticastRoutes Gauge32
  vRtrV6StatActiveNbrEntries Gauge32
  vRtrV6StatTotalNbrEntries Gauge32
  vRtrSubMgmtRoutes Gauge32
  vRtrSubMgmtActiveRoutes Gauge32
  vRtrStatTotalRsvpTunnels Gauge32
  vRtrStatActiveRsvpTunnels Gauge32
  vRtrV6StatTotalRsvpTunnels Gauge32
  vRtrV6StatActiveRsvpTunnels Gauge32
  vRtrHostRoutes Gauge32
  vRtrHostActiveRoutes Gauge32
  vRtrV6HostRoutes Gauge32
  vRtrV6HostActiveRoutes Gauge32
  vRtrStatLocalARPEntries Gauge32
  vRtrStatStaticARPEntries Gauge32
  vRtrStatDynamicARPEntries Gauge32
  vRtrStatManagedARPEntries Gauge32
  vRtrStatInternalARPEntries Gauge32
  vRtrManagedRoutes Gauge32
  vRtrManagedActiveRoutes Gauge32
  vRtrLDPRoutes Gauge32
  vRtrLDPActiveRoutes Gauge32
  vRtrVPNLeakRoutes Gauge32
  vRtrVPNLeakActiveRoutes Gauge32
  vRtrV6VPNLeakRoutes Gauge32
  vRtrV6VPNLeakActiveRoutes Gauge32
  vRtrV6SubMgmtRoutes Gauge32
  vRtrV6SubMgmtActiveRoutes Gauge32
  vRtrMobileHostRoutes Gauge32
  vRtrMobileHostActiveRoutes Gauge32
  vRtrV6MobileHostRoutes Gauge32
  vRtrV6MobileHostActiveRoutes Gauge32
  vRtrStatTotalBgpTunnels Gauge32
  vRtrStatActiveBgpTunnels Gauge32
  vRtrNatRoutes Gauge32
  vRtrNatActiveRoutes Gauge32
  vRtrV6NatRoutes Gauge32
  vRtrV6NatActiveRoutes Gauge32
  vRtrPeriodicRoutes Gauge32
  vRtrPeriodicActiveRoutes Gauge32
  vRtrV6PeriodicRoutes Gauge32
  vRtrV6PeriodicActiveRoutes Gauge32
  vRtrStatTotalMplsTpTunnels Gauge32
  vRtrStatActiveMplsTpTunnels Gauge32

VRtrIfEntry  
SEQUENCE    
  vRtrIfIndex InterfaceIndex
  vRtrIfRowStatus RowStatus
  vRtrIfType INTEGER
  vRtrIfName TNamedItem
  vRtrIfPortID TmnxPortID
  vRtrIfChannelID Unsigned32
  vRtrIfEncapValue TmnxEncapVal
  vRtrIfAdminState TmnxAdminState
  vRtrIfOperState TmnxOperState
  vRtrIfAlias DisplayString
  vRtrIfPhysicalAddress MacAddress
  vRtrIfArpTimeout Unsigned32
  vRtrIfIcmpMaskReply TruthValue
  vRtrIfIcmpRedirects TruthValue
  vRtrIfIcmpNumRedirects Unsigned32
  vRtrIfIcmpRedirectsTime Unsigned32
  vRtrIfIcmpUnreachables TruthValue
  vRtrIfIcmpNumUnreachables Unsigned32
  vRtrIfIcmpUnreachablesTime Unsigned32
  vRtrIfIcmpTtlExpired TruthValue
  vRtrIfIcmpNumTtlExpired Unsigned32
  vRtrIfIcmpTtlExpiredTime Unsigned32
  vRtrIfNtpBroadcast TruthValue
  vRtrIfUnnumbered IpAddress
  vRtrIfMtu Unsigned32
  vRtrIfQosPolicyId TNetworkPolicyID
  vRtrIfIngressFilterId TIPFilterID
  vRtrIfEgressFilterId TIPFilterID
  vRtrIfDirectedBroadcast TruthValue
  vRtrIfMplsStatus TmnxStatus
  vRtrIfUnnumberedIf DisplayString
  vRtrIfCflowd INTEGER
  vRtrIfVPNClass INTEGER
  vRtrIfDescription TItemLongDescription
  vRtrIfProtocol BITS
  vRtrIfTosMarkingTrusted TruthValue
  vRtrIfServiceId TmnxServId
  vRtrIfArpPopulate INTEGER
  vRtrIfIPv6ConfigAllowed TruthValue
  vRtrIfIPv6OperState TmnxOperState
  vRtrIfIPv6IngressFilterId TIPFilterID
  vRtrIfIPv6EgressFilterId TIPFilterID
  vRtrIfIcmpV6Redirects TruthValue
  vRtrIfIcmpV6NumRedirects Unsigned32
  vRtrIfIcmpV6RedirectsTime Unsigned32
  vRtrIfIcmpV6Unreachables TruthValue
  vRtrIfIcmpV6NumUnreachables Unsigned32
  vRtrIfIcmpV6UnreachablesTime Unsigned32
  vRtrIfIcmpV6TimeExceeded TruthValue
  vRtrIfIcmpV6NumTimeExceeded Unsigned32
  vRtrIfIcmpV6TimeExceededTime Unsigned32
  vRtrIfIcmpV6PktTooBig TruthValue
  vRtrIfIcmpV6NumPktTooBig Unsigned32
  vRtrIfIcmpV6PktTooBigTime Unsigned32
  vRtrIfIcmpV6ParamProblem TruthValue
  vRtrIfIcmpV6NumParamProblem Unsigned32
  vRtrIfIcmpV6ParamProblemTime Unsigned32
  vRtrIfLinkLocalAddressType InetAddressType
  vRtrIfLinkLocalAddress InetAddress
  vRtrIfLinkLocalAddressState TmnxInetAddrState
  vRtrIfLastOperStateChange TimeStamp
  vRtrIfOperMtu Unsigned32
  vRtrIfGlobalIndex Unsigned32
  vRtrIfDelaySeconds Unsigned32
  vRtrIfDelayUpTimer Integer32
  vRtrIfLocalDhcpServerName TNamedItemOrEmpty
  vRtrIfInitDelayEnable TruthValue
  vRtrIfCpmProtPolicyId TCpmProtPolicyID
  vRtrIfCpmProtUncfgdProtoDropCnt Gauge32
  vRtrIfLdpSyncTimer Unsigned32
  vRtrIfStripLabel TruthValue
  vRtrIfuRPFCheckState TmnxEnabledDisabled
  vRtrIfuRPFCheckMode INTEGER
  vRtrIfQosQGrp TNamedItemOrEmpty
  vRtrIfAdminLinkLocalAddrType InetAddressType
  vRtrIfAdminLinkLocalAddr InetAddress
  vRtrIfAdmLnkLclAddrPreferred TruthValue
  vRtrIfOperDownReason BITS

VRtrIcmp6Entry  
SEQUENCE    
  vRtrIcmp6InMsgs Counter32
  vRtrIcmp6InErrors Counter32
  vRtrIcmp6InDestUnreachs Counter32
  vRtrIcmp6InAdminProhibs Counter32
  vRtrIcmp6InTimeExcds Counter32
  vRtrIcmp6InParmProblems Counter32
  vRtrIcmp6InPktTooBigs Counter32
  vRtrIcmp6InEchos Counter32
  vRtrIcmp6InEchoReplies Counter32
  vRtrIcmp6InRtrSolicits Counter32
  vRtrIcmp6InRtrAdvertisements Counter32
  vRtrIcmp6InNbrSolicits Counter32
  vRtrIcmp6InNbrAdvertisements Counter32
  vRtrIcmp6InRedirects Counter32
  vRtrIcmp6InGrpMembQueries Counter32
  vRtrIcmp6InGrpMembResponses Counter32
  vRtrIcmp6InGrpMembReductions Counter32
  vRtrIcmp6OutMsgs Counter32
  vRtrIcmp6OutErrors Counter32
  vRtrIcmp6OutDestUnreachs Counter32
  vRtrIcmp6OutAdminProhibs Counter32
  vRtrIcmp6OutTimeExcds Counter32
  vRtrIcmp6OutParmProblems Counter32
  vRtrIcmp6OutPktTooBigs Counter32
  vRtrIcmp6OutEchos Counter32
  vRtrIcmp6OutEchoReplies Counter32
  vRtrIcmp6OutRtrSolicits Counter32
  vRtrIcmp6OutRtrAdvertisements Counter32
  vRtrIcmp6OutNbrSolicits Counter32
  vRtrIcmp6OutNbrAdvertisements Counter32
  vRtrIcmp6OutRedirects Counter32
  vRtrIcmp6OutGrpMembQueries Counter32
  vRtrIcmp6OutGrpMembResponses Counter32
  vRtrIcmp6OutGrpMembReductions Counter32

VRtrIfIcmp6Entry  
SEQUENCE    
  vRtrIfIcmp6InMsgs Counter32
  vRtrIfIcmp6InErrors Counter32
  vRtrIfIcmp6InDestUnreachs Counter32
  vRtrIfIcmp6InAdminProhibs Counter32
  vRtrIfIcmp6InTimeExcds Counter32
  vRtrIfIcmp6InParmProblems Counter32
  vRtrIfIcmp6InPktTooBigs Counter32
  vRtrIfIcmp6InEchos Counter32
  vRtrIfIcmp6InEchoReplies Counter32
  vRtrIfIcmp6InRtrSolicits Counter32
  vRtrIfIcmp6InRtrAdvertisements Counter32
  vRtrIfIcmp6InNbrSolicits Counter32
  vRtrIfIcmp6InNbrAdvertisements Counter32
  vRtrIfIcmp6InRedirects Counter32
  vRtrIfIcmp6InGrpMembQueries Counter32
  vRtrIfIcmp6InGrpMembResponses Counter32
  vRtrIfIcmp6InGrpMembReductions Counter32
  vRtrIfIcmp6OutMsgs Counter32
  vRtrIfIcmp6OutErrors Counter32
  vRtrIfIcmp6OutDestUnreachs Counter32
  vRtrIfIcmp6OutAdminProhibs Counter32
  vRtrIfIcmp6OutTimeExcds Counter32
  vRtrIfIcmp6OutParmProblems Counter32
  vRtrIfIcmp6OutPktTooBigs Counter32
  vRtrIfIcmp6OutEchos Counter32
  vRtrIfIcmp6OutEchoReplies Counter32
  vRtrIfIcmp6OutRtrSolicits Counter32
  vRtrIfIcmp6OutRtrSolicitsTime TimeStamp
  vRtrIfIcmp6OutRtrAdvertisements Counter32
  vRtrIfIcmp6OutRtrAdvTime TimeStamp
  vRtrIfIcmp6OutNbrSolicits Counter32
  vRtrIfIcmp6OutNbrSolicitsTime TimeStamp
  vRtrIfIcmp6OutNbrAdvertisements Counter32
  vRtrIfIcmp6OutNbrAdvTime TimeStamp
  vRtrIfIcmp6OutRedirects Counter32
  vRtrIfIcmp6OutGrpMembQueries Counter32
  vRtrIfIcmp6OutGrpMembResponses Counter32
  vRtrIfIcmp6OutGrpMembReductions Counter32

VRtrIfBfdEntry  
SEQUENCE    
  vRtrIfBfdAdminState TmnxAdminState
  vRtrIfBfdTransmitInterval Unsigned32
  vRtrIfBfdReceiveInterval Unsigned32
  vRtrIfBfdMultiplier Unsigned32
  vRtrIfBfdEchoInterval Unsigned32
  vRtrIfBfdType INTEGER

VRtrIfBfdSessionEntry  
SEQUENCE    
  vRtrIfBfdSessionLclAddrType InetAddressType
  vRtrIfBfdSessionLclAddr InetAddress
  vRtrIfBfdSessionRemAddrType InetAddressType
  vRtrIfBfdSessionRemAddr InetAddress
  vRtrIfBfdSessionOperState TmnxOperState
  vRtrIfBfdSessionState INTEGER
  vRtrIfBfdSessionOperFlags BITS
  vRtrIfBfdSessionMesgRecv Counter32
  vRtrIfBfdSessionMesgSent Counter32
  vRtrIfBfdSessionLastDownTime TimeStamp
  vRtrIfBfdSessionLastUpTime TimeStamp
  vRtrIfBfdSessionUpCount Counter32
  vRtrIfBfdSessionDownCount Counter32
  vRtrIfBfdSessionLclDisc Unsigned32
  vRtrIfBfdSessionRemDisc Unsigned32
  vRtrIfBfdSessionProtocols BITS
  vRtrIfBfdSessionTxInterval Unsigned32
  vRtrIfBfdSessionRxInterval Unsigned32
  vRtrIfBfdSessionType INTEGER
  vRtrIfBfdSessionVerMismatch Counter32
  vRtrIfBfdSessionTimeSinceLastRx Unsigned32
  vRtrIfBfdSessionTimeSinceLastTx Unsigned32

VRtrIfProxyArpEntry  
SEQUENCE    
  vRtrIfProxyArp TruthValue
  vRtrIfProxyArpLocal TruthValue
  vRtrIfProxyArpPolicy1 TPolicyStatementNameOrEmpty
  vRtrIfProxyArpPolicy2 TPolicyStatementNameOrEmpty
  vRtrIfProxyArpPolicy3 TPolicyStatementNameOrEmpty
  vRtrIfProxyArpPolicy4 TPolicyStatementNameOrEmpty
  vRtrIfProxyArpPolicy5 TPolicyStatementNameOrEmpty

VRtrIfDHCPEntry  
SEQUENCE    
  vRtrIfDHCPRelayInfoOption TruthValue
  vRtrIfDHCPRelayInfoAction INTEGER
  vRtrIfDHCPRelayCircuitId INTEGER
  vRtrIfDHCPRelayRemoteId INTEGER
  vRtrIfDHCPAutoFilter Unsigned32
  vRtrIfDHCPRelayServer1 IpAddress
  vRtrIfDHCPRelayServer2 IpAddress
  vRtrIfDHCPRelayServer3 IpAddress
  vRtrIfDHCPRelayServer4 IpAddress
  vRtrIfDHCPRelayServer5 IpAddress
  vRtrIfDHCPRelayServer6 IpAddress
  vRtrIfDHCPRelayServer7 IpAddress
  vRtrIfDHCPRelayServer8 IpAddress
  vRtrIfDHCPRelayTrusted TruthValue
  vRtrIfDHCPAdminState TmnxAdminState
  vRtrIfDHCPSnooping INTEGER
  vRtrIfDHCPDescription TItemDescription
  vRtrIfDHCPAutoFilterId TFilterID
  vRtrIfDHCPOperAutoFilter Unsigned32
  vRtrIfDHCPAuthPolicy TPolicyStatementNameOrEmpty
  vRtrIfDHCPLeasePopulate Unsigned32
  vRtrIfDHCPOperLeasePopulate Unsigned32
  vRtrIfDHCPGiAddressType InetAddressType
  vRtrIfDHCPGiAddress InetAddress
  vRtrIfDHCPGiAddressAsSrc TruthValue
  vRtrIfDHCPMatchOption82 TruthValue
  vRtrIfDHCPRelayRemoteIdStr DisplayString
  vRtrIfDHCPProxyAdminState TmnxAdminState
  vRtrIfDHCPProxyServerAddr IpAddress
  vRtrIfDHCPProxyLeaseTime Unsigned32
  vRtrIfDHCPProxyLTRadiusOverride TruthValue
  vRtrIfDHCPVendorIncludeOptions BITS
  vRtrIfDHCPVendorOptionString DisplayString
  vRtrIfDHCPLayer2Header TruthValue
  vRtrIfDHCPAntiSpoofMacAddr MacAddress
  vRtrIfDHCPClientApplications BITS
  vRtrIfDHCPRelayPlainBootp INTEGER
  vRtrIfDHCPUserDb TNamedItemOrEmpty
  vRtrIfDHCPUseArpForReply TruthValue
  vRtrIfDHCPFilterId TDHCPFilterID

VRtrIfDHCPRelayStatsEntry  
SEQUENCE    
  vRtrIfDHCPRelayRxPkts Counter32
  vRtrIfDHCPRelayTxPkts Counter32
  vRtrIfDHCPRelayRxMalformedPkts Counter32
  vRtrIfDHCPRelayRxUntrustedPkts Counter32
  vRtrIfDHCPRelayClientPktsDiscarded Counter32
  vRtrIfDHCPRelayClientPktsRelayed Counter32
  vRtrIfDHCPRelayServerPktsDiscarded Counter32
  vRtrIfDHCPRelayServerPktsRelayed Counter32
  vRtrIfDHCPRelayAuthPktsDiscarded Counter32
  vRtrIfDHCPRelayAuthPktsSuccess Counter32
  vRtrIfDHCPRelayClientPktsSnooped Counter32
  vRtrIfDHCPRelayServerPktsSnooped Counter32
  vRtrIfDHCPRelayClientPktsProxRad Counter32
  vRtrIfDHCPRelayClientPktsProxLS Counter32
  vRtrIfDHCPRelayPktsGenRelease Counter32
  vRtrIfDHCPRelayPktsGenForceRenew Counter32

VRtrIfDHCPLeaseStateEntry  
SEQUENCE    
  vRtrIfDHCPLseStateCiAddr IpAddress
  vRtrIfDHCPLseStateChAddr MacAddress
  vRtrIfDHCPLseStateRemainLseTime Unsigned32
  vRtrIfDHCPLseStateOption82 OCTET STRING
  vRtrIfDHCPLseStatePersistKey Unsigned32

VRtrIfDHCP6Entry  
SEQUENCE    
  vRtrIfDHCP6LastChanged TimeStamp
  vRtrIfDHCP6AdminState TmnxAdminState
  vRtrIfDHCP6OperState INTEGER
  vRtrIfDHCP6Description TItemDescription
  vRtrIfDHCP6RelayServer1 InetAddressIPv6z
  vRtrIfDHCP6RelayServer2 InetAddressIPv6z
  vRtrIfDHCP6RelayServer3 InetAddressIPv6z
  vRtrIfDHCP6RelayServer4 InetAddressIPv6z
  vRtrIfDHCP6RelayServer5 InetAddressIPv6z
  vRtrIfDHCP6RelayServer6 InetAddressIPv6z
  vRtrIfDHCP6RelayServer7 InetAddressIPv6z
  vRtrIfDHCP6RelayServer8 InetAddressIPv6z
  vRtrIfDHCP6RelayItfIdOption INTEGER
  vRtrIfDHCP6LeasePopulate Unsigned32
  vRtrIfDHCP6CurrLeasePopulate Unsigned32
  vRtrIfDHCP6SourceAddress InetAddressIPv6
  vRtrIfDHCP6EnableNgbrResolution TruthValue
  vRtrIfDHCP6RemoteIdOption TruthValue
  vRtrIfDHCP6PfxdAdminState INTEGER
  vRtrIfDHCP6ServerMaxLeaseStates Unsigned32
  vRtrIfDHCP6CurrServerLeaseStates Unsigned32
  vRtrIfDHCP6ItfIdString DisplayString
  vRtrIfDHCP6ProxyAdminState TmnxAdminState
  vRtrIfDHCP6ProxyRenewTimer Unsigned32
  vRtrIfDHCP6ProxyRebindTimer Unsigned32
  vRtrIfDHCP6ProxyValidLifetime Unsigned32
  vRtrIfDHCP6ProxyPrefLifetime Unsigned32
  vRtrIfDHCP6ProxyApplications BITS
  vRtrIfDHCP6UserDb TNamedItemOrEmpty
  vRtrIfDHCP6LocalDhcpServerName TNamedItemOrEmpty
  vRtrIfDHCP6RelayApplications BITS
  vRtrIfDHCP6LinkAddress InetAddressIPv6

VRtrIfNameEntry  
SEQUENCE    
  vRtrIfNameIndex InterfaceIndex

VRtrIpAddrEntry  
SEQUENCE    
  vRiaIndex INTEGER
  vRiaRowStatus RowStatus
  vRiaIpAddress IpAddress
  vRiaNetMask IpAddress
  vRiaBcastAddrFormat INTEGER
  vRiaReasmMaxSize INTEGER
  vRiaIgpInhibit TruthValue
  vRiaInetAddressType InetAddressType
  vRiaInetAddress InetAddress
  vRiaInetPrefixLen InetAddressPrefixLength
  vRiaInetAddrState TmnxInetAddrState
  vRiaInetEui64 TruthValue
  vRiaInetOperAddress InetAddress
  vRiaInetGwAddressType InetAddressType
  vRiaInetGwAddress InetAddress
  vRiaInetRemoteIpType InetAddressType
  vRiaInetRemoteIp InetAddress
  vRiaInetAddrPreferred TruthValue
  vRiaSubscrPrefix TruthValue
  vRiaSubscrPrefixType BITS
  vRiaSubscrHostRoutePopulate TruthValue
  vRiaTrackSrrpInstance Unsigned32
  vRiaHoldUpTime Unsigned32

VRtrIpCidrRouteEntry  
SEQUENCE    
  vRtrIpCidrRouteLastEnabledTime TimeStamp
  vRtrIpCidrRoutePreference Unsigned32
  vRtrIpCidrRouteMetric Unsigned32

VRtrStaticRouteEntry  
SEQUENCE    
  vRtrStaticRouteDest IpAddress
  vRtrStaticRouteMask IpAddress
  vRtrStaticRouteIndex INTEGER
  vRtrStaticRouteRowStatus RowStatus
  vRtrStaticRouteLastEnabledTime TimeStamp
  vRtrStaticRouteStatus INTEGER
  vRtrStaticRouteStaticType INTEGER
  vRtrStaticRoutePreference Unsigned32
  vRtrStaticRouteMetric Unsigned32
  vRtrStaticRouteEgressIfIndex InterfaceIndexOrZero
  vRtrStaticRouteNextHop IpAddress
  vRtrStaticRouteNextHopUnnumberedIf DisplayString
  vRtrStaticRouteAdminState TmnxAdminState
  vRtrStaticRouteIgpShortcut BITS
  vRtrStaticRouteDisallowIgp TruthValue
  vRtrStaticRouteTag Unsigned32

VRtrSvcIpRangeEntry  
SEQUENCE    
  vRtrSvcIpRangeAddress IpAddress
  vRtrSvcIpRangeMask Unsigned32
  vRtrSvcIpRangeRowStatus RowStatus
  vRtrSvcIpRangeExclusive TruthValue

VRtrIpNetToMediaEntry  
SEQUENCE    
  vRtrIpNetToMediaTimer Unsigned32
  vRtrIpNetToMediaOperState TmnxOperState

VRtrInstanceAggregationEntry  
SEQUENCE    
  vRtrAggregationIpPrefix IpAddress
  vRtrAggregationIpPrefixMask IpAddressPrefixLength
  vRtrAggregationRowStatus RowStatus
  vRtrAggregationLastChanged TimeStamp
  vRtrAggregationSummaryOnly TruthValue
  vRtrAggregationASSet TruthValue
  vRtrAggregationAggregatorAS TmnxBgpAutonomousSystem
  vRtrAggregationAggregatorIPAddr IpAddress
  vRtrAggregationOperState TmnxOperState

VRtrStaticRouteIndexEntry  
SEQUENCE    
  vRtrStaticRouteIndexDest IpAddress
  vRtrStaticRouteIndexMask IpAddress
  vRtrStaticRouteAvailableIndex TestAndIncr

VRtrTunnelEntry  
SEQUENCE    
  vRtrTunnelDest IpAddress
  vRtrTunnelMask IpAddress
  vRtrTunnelPreference Unsigned32
  vRtrTunnelType TmnxTunnelType
  vRtrTunnelID TmnxTunnelID
  vRtrTunnelNexthop IpAddress
  vRtrTunnelMetric Unsigned32
  vRtrTunnelAge Integer32

VRtrAdvPrefixEntry  
SEQUENCE    
  vRtrAdvPrefixIfIndex InterfaceIndex
  vRtrAdvPrefixPrefix InetAddress
  vRtrAdvPrefixLength InetAddressPrefixLength
  vRtrAdvPrefixRowStatus RowStatus
  vRtrAdvPrefixOnLinkFlag TruthValue
  vRtrAdvPrefixAutonomousFlag TruthValue
  vRtrAdvPrefixPreferredLifetime Unsigned32
  vRtrAdvPrefixValidLifetime Unsigned32

VRtrInetStaticRouteEntry  
SEQUENCE    
  vRtrInetStaticRouteDestType InetAddressType
  vRtrInetStaticRouteDest InetAddress
  vRtrInetStaticRouteDestPfxLen InetAddressPrefixLength
  vRtrInetStaticRouteIndex INTEGER
  vRtrInetStaticRouteRowStatus RowStatus
  vRtrInetStaticRouteLastEnabledTime TimeStamp
  vRtrInetStaticRouteStatus INTEGER
  vRtrInetStaticRouteStaticType INTEGER
  vRtrInetStaticRoutePreference Unsigned32
  vRtrInetStaticRouteMetric Unsigned32
  vRtrInetStaticRouteEgressIfIndex InterfaceIndexOrZero
  vRtrInetStaticRouteNextHopType InetAddressType
  vRtrInetStaticRouteNextHop InetAddress
  vRtrInetStaticRouteNextHopIf DisplayString
  vRtrInetStaticRouteAdminState TmnxAdminState
  vRtrInetStaticRouteIgpShortcut BITS
  vRtrInetStaticRouteDisallowIgp TruthValue
  vRtrInetStaticRouteTag Unsigned32
  vRtrInetStaticRouteEnableBfd TruthValue
  vRtrInetStaticRouteCpeAddrType InetAddressType
  vRtrInetStaticRouteCpeAddr InetAddress
  vRtrInetStaticRouteCpeInterval Unsigned32
  vRtrInetStaticRouteCpeDropCnt Unsigned32
  vRtrInetStaticRouteCpeEnableLog TruthValue
  vRtrInetStaticRouteNHTunnelName TNamedItemOrEmpty
  vRtrInetStaticRoutePrefixListName TNamedItemOrEmpty
  vRtrInetStaticRoutePrefixListFlag INTEGER
  vRtrInetStaticRouteLdpSync TruthValue
  vRtrInetStaticRouteFC TNamedItemOrEmpty
  vRtrInetStaticRouteFCPriority TPriorityOrUndefined

VRtrInetStaticRouteIndexEntry  
SEQUENCE    
  vRtrInetStaticRouteAvailIndex TestAndIncr

VRtrInetInstAggrEntry  
SEQUENCE    
  vRtrInetAggrIpPrefixType InetAddressType
  vRtrInetAggrIpPrefix InetAddress
  vRtrInetAggrIpPrefixLen InetAddressPrefixLength
  vRtrInetAggrRowStatus RowStatus
  vRtrInetAggrLastChanged TimeStamp
  vRtrInetAggrSummaryOnly TruthValue
  vRtrInetAggrASSet TruthValue
  vRtrInetAggrAggregatorAS TmnxBgpAutonomousSystem
  vRtrInetAggrAggregatorIPAddr IpAddress
  vRtrInetAggrOperState TmnxOperState
  vRtrInetAggrAggregatorAS4Byte InetAutonomousSystemNumber
  vRtrInetAggrNextHopType INTEGER

VRtrInetSvcIpRangeEntry  
SEQUENCE    
  vRtrInetSvcIpRangeAddrType InetAddressType
  vRtrInetSvcIpRangeAddr InetAddress
  vRtrInetSvcIpRangePfxLen InetAddressPrefixLength
  vRtrInetSvcIpRangeRowStatus RowStatus
  vRtrInetSvcIpRangeExclusive TruthValue

VRtrIpNetToPhysicalEntry  
SEQUENCE    
  vRtrIpNetToPhysicalTimer Unsigned32
  vRtrIpNetToPhysicalOperState TmnxOperState
  vRtrIpNetToPhysicalIsRouter TruthValue
  vRtrIpNetToPhysicalMTU Unsigned32
  vRtrIpNetToPhysicalPort TmnxPortID
  vRtrIpNetToPhysicalEncap TmnxEncapVal

VRtrInetCidrRouteEntry  
SEQUENCE    
  vRtrInetCidrRouteLastEnabledTime TimeStamp
  vRtrInetCidrRoutePreference Unsigned32
  vRtrInetCidrRouteMetric Unsigned32
  vRtrInetCidrRouteIfVRtrId TmnxVRtrIDOrZero
  vRtrInetCidrRouteTunnEndpntInfo OCTET STRING
  vRtrInetCidrProtocolInstance Unsigned32
  vRtrInetCidrRouteNextHopType TmnxInetCidrNextHopType
  vRtrInetCidrRouteNextHopOwner TmnxInetCidrNextHopOwner
  vRtrInetCidrRouteNHOwnerAuxInfo Unsigned32
  vRtrInetCidrRouteNHFC TFCNameOrEmpty
  vRtrInetCidrRouteNHPriority TPriorityOrUndefined
  vRtrInetCidrRouteBkupFlags INTEGER
  vRtrInetCidrRouteBkupNextHopType InetAddressType
  vRtrInetCidrRouteBkupNextHop InetAddress
  vRtrInetCidrRouteBkupMetric Unsigned32
  vRtrInetCidrRouteNextHopRepCount Unsigned32
  vRtrInetCidrRouteBkupNHType TmnxInetCidrNextHopType
  vRtrInetCidrRouteBkupNHOwner TmnxInetCidrNextHopOwner
  vRtrInetCidrRouteBkupNHOwnAxInfo Unsigned32

VRtrIfGlobalIndexEntry  
SEQUENCE    
  vRtrIfGlobalIndexvRtrID TmnxVRtrID
  vRtrIfGlobalIndexvRtrIfIndex InterfaceIndex

VRtrIfProxyNDEntry  
SEQUENCE    
  vRtrIfProxyNDLocal TruthValue
  vRtrIfProxyNDPolicy1 TPolicyStatementNameOrEmpty
  vRtrIfProxyNDPolicy2 TPolicyStatementNameOrEmpty
  vRtrIfProxyNDPolicy3 TPolicyStatementNameOrEmpty
  vRtrIfProxyNDPolicy4 TPolicyStatementNameOrEmpty
  vRtrIfProxyNDPolicy5 TPolicyStatementNameOrEmpty

VRtrIfDHCP6PfxDelegationEntry  
SEQUENCE    
  vRtrIfDHCP6PfxdPrefix InetAddressIPv6
  vRtrIfDHCP6PfxdPrefixLen InetAddressPrefixLength
  vRtrIfDHCP6PfxdRowStatus RowStatus
  vRtrIfDHCP6PfxdLastChanged TimeStamp
  vRtrIfDHCP6PfxdDUID OCTET STRING
  vRtrIfDHCP6PfxdIAID Unsigned32
  vRtrIfDHCP6PfxdPrefLifetime Unsigned32
  vRtrIfDHCP6PfxdValidLifetime Unsigned32

VRtrDHCP6DropStatEntry  
SEQUENCE    
  vRtrDHCP6DropStatReason INTEGER
  vRtrDHCP6DropStatLastCleared TimeStamp
  vRtrDHCP6DropStatPktsDropped Gauge32

VRtrDHCP6MsgStatEntry  
SEQUENCE    
  vRtrDHCP6MsgStatsMsgType TmnxDHCP6MsgType
  vRtrDHCP6MsgStatsLstClrd TimeStamp
  vRtrDHCP6MsgStatsRcvd Gauge32
  vRtrDHCP6MsgStatsSent Gauge32
  vRtrDHCP6MsgStatsDropped Gauge32

VRtrIfIpcpEntry  
SEQUENCE    
  vRtrIfIpcpPeerAddrType InetAddressType
  vRtrIfIpcpPeerAddr InetAddress
  vRtrIfIpcpPriDnsAddrType InetAddressType
  vRtrIfIpcpPriDnsAddr InetAddress
  vRtrIfIpcpSecDnsAddrType InetAddressType
  vRtrIfIpcpSecDnsAddr InetAddress

VRtrInetStatRteCpeChkStatsEntry  
SEQUENCE    
  vRtrInetStatRteCpeChkUpTime TimeTicks
  vRtrInetStatRteCpeChkInPktCnt Counter32
  vRtrInetStatRteCpeChkOutPktCnt Counter32
  vRtrInetStatRteCpeChkDownTrans Gauge32
  vRtrInetStatRteCpeChkUpTrans Gauge32
  vRtrInetStatRteCpeChkTTL Unsigned32

TmnxDscpAppEntry  
SEQUENCE    
  tmnxDscpAppId TDSCPAppId
  tmnxDscpAppLastChanged TimeStamp
  tmnxDscpAppDscpValue TDSCPValueOrNone

TmnxDscpFCEntry  
SEQUENCE    
  tmnxDscpFCDscpValue TDSCPValue
  tmnxDscpFCLastChanged TimeStamp
  tmnxDscpFCValue TFCType

TmnxDot1pAppEntry  
SEQUENCE    
  tmnxDot1pAppId TDot1pAppId
  tmnxDot1pAppLastChanged TimeStamp
  tmnxDot1pAppValue Dot1PPriority

VRtrFibStatEntry  
SEQUENCE    
  vRtrFibStatStaticRoutes Gauge32
  vRtrFibStatDirectRoutes Gauge32
  vRtrFibStatHostRoutes Gauge32
  vRtrFibStatBGPRoutes Gauge32
  vRtrFibStatBGPVpnRoutes Gauge32
  vRtrFibStatOSPFRoutes Gauge32
  vRtrFibStatISISRoutes Gauge32
  vRtrFibStatRIPRoutes Gauge32
  vRtrFibStatAggrRoutes Gauge32
  vRtrFibStatSubMgmtRoutes Gauge32
  vRtrFibStatManagedRoutes Gauge32
  vRtrFibStatV6StaticRoutes Gauge32
  vRtrFibStatV6DirectRoutes Gauge32
  vRtrFibStatV6HostRoutes Gauge32
  vRtrFibStatV6BGPRoutes Gauge32
  vRtrFibStatV6BGPVpnRoutes Gauge32
  vRtrFibStatV6OSPFRoutes Gauge32
  vRtrFibStatV6ISISRoutes Gauge32
  vRtrFibStatV6RIPRoutes Gauge32
  vRtrFibStatV6AggrRoutes Gauge32
  vRtrFibStatV6SubMgmtRoutes Gauge32
  vRtrFibStatV6ManagedRoutes Gauge32
  vRtrFibStatOverflows Gauge32
  vRtrFibStatAlarmCount Gauge32
  vRtrFibStatLastAlarmTime TimeStamp
  vRtrFibStatHighUtilization TruthValue
  vRtrFibStatMobileHostRoutes Gauge32
  vRtrFibStatV6MobileHostRoutes Gauge32
  vRtrFibStatVPNLeakRoutes Gauge32
  vRtrFibStatV6VPNLeakRoutes Gauge32
  vRtrFibStatNatRoutes Gauge32
  vRtrFibStatV6NatRoutes Gauge32

VRtrFibStatNextHopEntry  
SEQUENCE    
  vRtrFibStatNextHopIPActive Gauge32
  vRtrFibStatNextHopIPAvailable Gauge32
  vRtrFibStatNextHopTunnelActive Gauge32
  vRtrFibStatNextHopTunnelAvailable Gauge32

VRtrInetAllCidrRouteEntry  
SEQUENCE    
  vRtrInetAllCidrRouteProtoID Unsigned32
  vRtrInetAllCidrRouteIfIndex InterfaceIndexOrZero
  vRtrInetAllCidrRouteType INTEGER
  vRtrInetAllCidrRouteAge Gauge32
  vRtrInetAllCidrRouteNextHopAS InetAutonomousSystemNumber
  vRtrInetAllCidrRouteMetric1 Integer32
  vRtrInetAllCidrRouteMetric2 Integer32
  vRtrInetAllCidrRouteMetric3 Integer32
  vRtrInetAllCidrRouteMetric4 Integer32
  vRtrInetAllCidrRouteMetric5 Integer32
  vRtrInetAllCidrRoutePreference Unsigned32
  vRtrInetAllCidrRouteMetric Unsigned32
  vRtrInetAllCidrRouteIfVRtrId TmnxVRtrIDOrZero
  vRtrInetAllCidrRouteIsActive TruthValue
  vRtrInetAllCidrRouteBkupFlags INTEGER
  vRtrInetAllCidrRouteBkupNHopType InetAddressType
  vRtrInetAllCidrRouteBkupNextHop InetAddress
  vRtrInetAllCidrRouteBkupMetric Unsigned32
  vRtrInetAllCidrRouteNHopRepCount Unsigned32
  vRtrInetAllCidrRtNextHopType TmnxInetCidrNextHopType
  vRtrInetAllCidrRtNextHopOwner TmnxInetCidrNextHopOwner
  vRtrInetAllCidrRtNHOwnerAuxInfo Unsigned32
  vRtrInetAllCidrRtBkupNHType TmnxInetCidrNextHopType
  vRtrInetAllCidrRtBkupNHOwner TmnxInetCidrNextHopOwner
  vRtrInetAllCidrRtBkupNHOwnAxInfo Unsigned32

VRtrIfStatsEntry  
SEQUENCE    
  vRtrIfuRPFCheckFailPkts Counter64
  vRtrIfuRPFCheckFailPktsLow32 Counter32
  vRtrIfuRPFCheckFailPktsHigh32 Counter32
  vRtrIfuRPFCheckFailBytes Counter64
  vRtrIfuRPFCheckFailBytesLow32 Counter32
  vRtrIfuRPFCheckFailBytesHigh32 Counter32
  vRtrIfIpReasFragPktsRcvd Counter64
  vRtrIfIpReasFragPktsRcvdLow32 Counter32
  vRtrIfIpReasFragPktsRcvdHigh32 Counter32
  vRtrIfIpReasFragBytesRcvd Counter64
  vRtrIfIpReasFragBytesRcvdLow32 Counter32
  vRtrIfIpReasFragBytesRcvdHigh32 Counter32
  vRtrIfIpReasFragPktsReas Counter64
  vRtrIfIpReasFragPktsReasLow32 Counter32
  vRtrIfIpReasFragPktsReasHigh32 Counter32
  vRtrIfIpReasFragBytesReas Counter64
  vRtrIfIpReasFragBytesReasLow32 Counter32
  vRtrIfIpReasFragBytesReasHigh32 Counter32
  vRtrIfIpReasFragReasErrors Counter64
  vRtrIfIpReasFragReasErrorsLow32 Counter32
  vRtrIfIpReasFragReasErrorsHigh32 Counter32
  vRtrIfIpReasFragDisc Counter64
  vRtrIfIpReasFragDiscLow32 Counter32
  vRtrIfIpReasFragDiscHigh32 Counter32
  vRtrIfIpReasOutBufRes Counter64
  vRtrIfIpReasOutBufResLow32 Counter32
  vRtrIfIpReasOutBufResHigh32 Counter32
  vRtrIfIpReasPktsRx Counter64
  vRtrIfIpReasPktsRxLow32 Counter32
  vRtrIfIpReasPktsRxHigh32 Counter32
  vRtrIfIpReasBytesRx Counter64
  vRtrIfIpReasBytesRxLow32 Counter32
  vRtrIfIpReasBytesRxHigh32 Counter32
  vRtrIfIpReasPktsTx Counter64
  vRtrIfIpReasPktsTxLow32 Counter32
  vRtrIfIpReasPktsTxHigh32 Counter32
  vRtrIfIpReasBytesTx Counter64
  vRtrIfIpReasBytesTxLow32 Counter32
  vRtrIfIpReasBytesTxHigh32 Counter32
  vRtrIfRxPkts Counter64
  vRtrIfRxPktsLow32 Counter32
  vRtrIfRxPktsHigh32 Counter32
  vRtrIfRxBytes Counter64
  vRtrIfRxBytesLow32 Counter32
  vRtrIfRxBytesHigh32 Counter32
  vRtrIfTxV4Pkts Counter64
  vRtrIfTxV4PktsLow32 Counter32
  vRtrIfTxV4PktsHigh32 Counter32
  vRtrIfTxV4Bytes Counter64
  vRtrIfTxV4BytesLow32 Counter32
  vRtrIfTxV4BytesHigh32 Counter32
  vRtrIfTxV6Pkts Counter64
  vRtrIfTxV6PktsLow32 Counter32
  vRtrIfTxV6PktsHigh32 Counter32
  vRtrIfTxV6Bytes Counter64
  vRtrIfTxV6BytesLow32 Counter32
  vRtrIfTxV6BytesHigh32 Counter32
  vRtrIfTxV4DiscardPkts Counter64
  vRtrIfTxV4DiscardPktsLow32 Counter32
  vRtrIfTxV4DiscardPktsHigh32 Counter32
  vRtrIfTxV4DiscardBytes Counter64
  vRtrIfTxV4DiscardBytesLow32 Counter32
  vRtrIfTxV4DiscardBytesHigh32 Counter32
  vRtrIfTxV6DiscardPkts Counter64
  vRtrIfTxV6DiscardPktsLow32 Counter32
  vRtrIfTxV6DiscardPktsHigh32 Counter32
  vRtrIfTxV6DiscardBytes Counter64
  vRtrIfTxV6DiscardBytesLow32 Counter32
  vRtrIfTxV6DiscardBytesHigh32 Counter32
  vRtrIfIpReasV6FragPktsRcvd Counter64
  vRtrIfIpReasV6FragPktsRcvdLow32 Counter32
  vRtrIfIpReasV6FragPktsRcvdHigh32 Counter32
  vRtrIfIpReasV6FragBytesRcvd Counter64
  vRtrIfIpReasV6FragBytesRcvdL32 Counter32
  vRtrIfIpReasV6FragBytesRcvdH32 Counter32
  vRtrIfIpReasV6FragPktsReas Counter64
  vRtrIfIpReasV6FragPktsReasLow32 Counter32
  vRtrIfIpReasV6FragPktsReasHigh32 Counter32
  vRtrIfIpReasV6FragBytesReas Counter64
  vRtrIfIpReasV6FragBytesReasL32 Counter32
  vRtrIfIpReasV6FragBytesReasH32 Counter32
  vRtrIfIpReasV6FragReasErrors Counter64
  vRtrIfIpReasV6FragReasErrorsL32 Counter32
  vRtrIfIpReasV6FragReasErrorsH32 Counter32
  vRtrIfIpReasV6FragDisc Counter64
  vRtrIfIpReasV6FragDiscLow32 Counter32
  vRtrIfIpReasV6FragDiscHigh32 Counter32
  vRtrIfIpReasV6OutBufRes Counter64
  vRtrIfIpReasV6OutBufResLow32 Counter32
  vRtrIfIpReasV6OutBufResHigh32 Counter32
  vRtrIfIpReasV6PktsRx Counter64
  vRtrIfIpReasV6PktsRxLow32 Counter32
  vRtrIfIpReasV6PktsRxHigh32 Counter32
  vRtrIfIpReasV6BytesRx Counter64
  vRtrIfIpReasV6BytesRxLow32 Counter32
  vRtrIfIpReasV6BytesRxHigh32 Counter32
  vRtrIfIpReasV6PktsTx Counter64
  vRtrIfIpReasV6PktsTxLow32 Counter32
  vRtrIfIpReasV6PktsTxHigh32 Counter32
  vRtrIfIpReasV6BytesTx Counter64
  vRtrIfIpReasV6BytesTxLow32 Counter32
  vRtrIfIpReasV6BytesTxHigh32 Counter32
  vRtrIfSpeed Counter64

VRtrIpPoolEntry  
SEQUENCE    
  vRtrIpPoolName TNamedItem
  vRtrIpPoolRowStatus RowStatus
  vRtrIpPoolLastChanged TimeStamp
  vRtrIpPoolDescription TItemDescription
  vRtrIpPoolExclusive TruthValue
  vRtrIpPoolAddressHoldTimer Unsigned32
  vRtrIpPoolSuppress0and255 TruthValue

VRtrIpPoolAddrEntry  
SEQUENCE    
  vRtrIpPoolAddrType InetAddressType
  vRtrIpPoolAddr InetAddress
  vRtrIpPoolAddrPrefixLen InetAddressPrefixLength
  vRtrIpPoolAddrRowStatus RowStatus
  vRtrIpPoolAddrLastChanged TimeStamp
  vRtrIpPoolAddrBlock TruthValue
  vRtrIpPoolAddrIpv6AssignedLen Unsigned32

VRtrIpPoolStatEntry  
SEQUENCE    
  vRtrIpPoolStatAllocated Gauge32
  vRtrIpPoolStatFree Gauge32
  vRtrIpPoolStatHeld Gauge32

VRtrNetDomainEntry  
SEQUENCE    
  vRtrNetDomainName TNamedItem
  vRtrNetDomainRowStatus RowStatus
  vRtrNetDomainLastChanged TimeStamp
  vRtrNetDomainDesc TItemDescription
  vRtrNetDomainIfAssociationCnt Gauge32
  vRtrNetDomainSdpAssociationCnt Gauge32

VRtrIfNetDomainEntry  
SEQUENCE    
  vRtrIfNetDomainRowStatus RowStatus
  vRtrIfNetDomainLastChanged TimeStamp

VRtrConfExtEntry  
SEQUENCE    
  vRtrLdpShortcut TmnxEnabledDisabled
  vRtrSingleSfmOverloadAdminState TmnxAdminState
  vRtrSingleSfmOverloadHldOffTime Unsigned32
  vRtrSingleSfmOverloadState TmnxVrtrSingleSfmOverloadState
  vRtrSingleSfmOverloadStart TimeStamp
  vRtrSingleSfmOverloadTime TimeInterval
  vRtrGrtState TruthValue
  vRtrMvpnIpmsiP2MPAdmin TmnxAdminState
  vRtrMvpnSpmsiP2MPAdmin TmnxAdminState
  vRtrMvpnIpmsiLspTemplate TNamedItemOrEmpty
  vRtrMvpnSpmsiLspTemplate TNamedItemOrEmpty
  vRtrMvpnIpmsiType INTEGER
  vRtrMvpnSpmsiType INTEGER
  vRtrMvpnSpmsiMaxLimit Unsigned32
  vRtrFibPriority INTEGER
  vRtrCarrierCarrierVpn TruthValue
  vRtrLabelMode INTEGER
  vRtrBgpSharedQueue TruthValue
  vRtrBgpSharedQueueCIR TCIRRate
  vRtrBgpSharedQueuePIR TPIRRate
  vRtrMvpnMdtSafi TruthValue
  vRtrMvpnMdtDefGrpAddrType InetAddressType
  vRtrMvpnMdtDefGrpAddress InetAddress
  vRtrMvpnIpmsiEnableBfdRoot TruthValue
  vRtrMvpnIpmsiEnableBfdLeaf TruthValue
  vRtrMvpnIpmsiBfdRtTraInt Unsigned32
  vRtrMvpnIpmsiBfdRootMult Unsigned32
  vRtrVpnBackupPath TmnxVpnIpBackupFamily
  vRtrIpFastReroute TruthValue
  vRtrGrtLocalMgmtState TruthValue

VRtrIfExtEntry  
SEQUENCE    
  vRtrIfLsrIpLoadBalancing INTEGER
  vRtrIfIngressIpv4Flowspec TruthValue
  vRtrIfInfo OCTET STRING
  vRtrIfInfoEncrypted TruthValue
  vRtrIfQosRouteLookup INTEGER
  vRtrIfIpv6QosRouteLookup INTEGER
  vRtrIfStatusString DisplayString
  vRtrIfIpv6uRPFCheckState TmnxEnabledDisabled
  vRtrIfIpv6uRPFCheckMode INTEGER
  vRtrIfTmsOffRampVprn TmnxServId
  vRtrIfTmsMgmtVprn TmnxServId

VRtrRsvpTunIfEntry  
SEQUENCE    
  vRtrRsvpTunIfLspName TNamedItem
  vRtrRsvpTunIfSenderAddrType InetAddressType
  vRtrRsvpTunIfSenderAddr InetAddress
  vRtrRsvpTunIfRowStatus RowStatus
  vRtrRsvpTunIfLastChanged TimeStamp
  vRtrRsvpTunIfSessionId Unsigned32
  vRtrRsvpTunIfTransmitInt Unsigned32
  vRtrRsvpTunIfMultiplier Unsigned32
  vRtrRsvpTunIfStandbyLspName TNamedItem
  vRtrRsvpTunIfStandbyAddrType InetAddressType
  vRtrRsvpTunIfStandbyAddr InetAddress
  vRtrRsvpTunIfIfIndex InterfaceIndex
  vRtrRsvpTunIfHoldTimer Unsigned32
  vRtrRsvpTunIfStandbySessionId Unsigned32
  vRtrRsvpTunIfStandbyIfIndex InterfaceIndex
  vRtrRsvpTunIfDescription TItemDescription

VRtrRsvpTunIfSrcEntry  
SEQUENCE    
  vRtrRsvpTunIfSrcAddrType InetAddressType
  vRtrRsvpTunIfSrcAddr InetAddress
  vRtrRsvpTunIfSrcRowStatus RowStatus
  vRtrRsvpTunIfSrcLastChanged TimeStamp
  vRtrRsvpTunIfSrcBfdEnable TruthValue
  vRtrRsvpTunIfSrcSessionId Unsigned32
  vRtrRsvpTunIfSrcTransmitInt Unsigned32
  vRtrRsvpTunIfSrcMultiplier Unsigned32
  vRtrRsvpTunIfSrcStandbySessionId Unsigned32

VRtrLdpTunIfEntry  
SEQUENCE    
  vRtrLdpTunIfP2mpId Unsigned32
  vRtrLdpTunIfSenderAddrType InetAddressType
  vRtrLdpTunIfSenderAddr InetAddress
  vRtrLdpTunIfRowStatus RowStatus
  vRtrLdpTunIfLastChanged TimeStamp
  vRtrLdpTunIfIfIndex InterfaceIndex
  vRtrLdpTunIfDescription TItemDescription
  vRtrLdpTunIfRootNode TruthValue

VRtrInetCidrRteTnlExtEntry  
SEQUENCE    
  vRtrInetCidrRteTnlNextHopType TmnxInetCidrNextHopType
  vRtrInetCidrRteTnlNextHopOwner TmnxInetCidrNextHopOwner
  vRtrInetCidrRteTnlNextHopTnlId Unsigned32
  vRtrInetCidrRteTnlEnabledTime TimeStamp

VRtrIfBfdExtEntry  
SEQUENCE    
  vRtrIfBfdExtAddressType InetAddressType
  vRtrIfBfdExtAdminState TmnxAdminState
  vRtrIfBfdExtTransmitInterval Unsigned32
  vRtrIfBfdExtReceiveInterval Unsigned32
  vRtrIfBfdExtMultiplier Unsigned32
  vRtrIfBfdExtEchoInterval Unsigned32
  vRtrIfBfdExtType INTEGER

VRtrIfIpReasEntry  
SEQUENCE    
  vRtrIfIpReasPortID TmnxPortID
  vRtrIfIpReasContextValue TmnxReasContextVal

VRtrMsPwL2RtEntry  
SEQUENCE    
  vRtrMsPwL2RtDestGlobalId TmnxPwGlobalIdOrZero
  vRtrMsPwL2RtDestPrefix Unsigned32
  vRtrMsPwL2RtDestAcId Unsigned32
  vRtrMsPwL2RtDestPrefixLen InetAddressPrefixLength
  vRtrMsPwL2RtDestRD TmnxVPNRouteDistinguisher
  vRtrMsPwL2RtNextHopAddrType InetAddressType
  vRtrMsPwL2RtNextHopAddr InetAddress
  vRtrMsPwL2RtNextHopOwner TmnxL3RouteOwner
  vRtrMsPwL2RtRDCommunity Unsigned32
  vRtrMsPwL2RtIsBestRoute TruthValue
  vRtrMsPwL2RtAge Gauge32

VRtrIfStatsExtEntry  
SEQUENCE    
  vRtrIfTxPkts Counter64
  vRtrIfTxPktsLow32 Counter32
  vRtrIfTxPktsHigh32 Counter32
  vRtrIfTxBytes Counter64
  vRtrIfTxBytesLow32 Counter32
  vRtrIfTxBytesHigh32 Counter32

VRtrStatExtEntry  
SEQUENCE    
  vRtrISISAltRoutes Gauge32
  vRtrISISActiveAltRoutes Gauge32
  vRtrBGPAltRoutes Gauge32
  vRtrBGPActiveAltRoutes Gauge32
  vRtrStatCurrNumAltRoutes Gauge32
  vRtrV6ISISAltRoutes Gauge32
  vRtrV6ISISActiveAltRoutes Gauge32
  vRtrV6BGPAltRoutes Gauge32
  vRtrV6BGPActiveAltRoutes Gauge32
  vRtrV6StatCurrNumAltRoutes Gauge32
  vRtrBGPVPNAltRoutes Gauge32
  vRtrBGPVPNActiveAltRoutes Gauge32
  vRtrV6BGPVPNAltRoutes Gauge32
  vRtrV6BGPVPNActiveAltRoutes Gauge32
  vRtrOSPFAltRoutes Gauge32
  vRtrOSPFActiveAltRoutes Gauge32
  vRtrV6OSPFAltRoutes Gauge32
  vRtrV6OSPFActiveAltRoutes Gauge32

VRtrVrfPolicyEntry  
SEQUENCE    
  vRtrVrfImportPolicy1 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy2 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy3 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy4 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy5 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy6 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy7 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy8 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy9 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy10 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy11 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy12 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy13 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy14 TPolicyStatementNameOrEmpty
  vRtrVrfImportPolicy15 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy1 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy2 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy3 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy4 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy5 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy6 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy7 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy8 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy9 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy10 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy11 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy12 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy13 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy14 TPolicyStatementNameOrEmpty
  vRtrVrfExportPolicy15 TPolicyStatementNameOrEmpty

VRtrMvpnVrfPolicyEntry  
SEQUENCE    
  vRtrMvpnVrfImportPolicy1 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy2 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy3 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy4 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy5 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy6 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy7 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy8 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy9 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy10 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy11 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy12 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy13 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy14 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfImportPolicy15 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy1 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy2 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy3 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy4 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy5 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy6 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy7 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy8 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy9 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy10 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy11 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy12 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy13 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy14 TPolicyStatementNameOrEmpty
  vRtrMvpnVrfExportPolicy15 TPolicyStatementNameOrEmpty

VRtrIfQosEntry  
SEQUENCE    
  vRtrIfQosNetworkPolicyId TNetworkPolicyID
  vRtrIfQosEgrPortRedirectQGrp TNamedItemOrEmpty
  vRtrIfQosEgrQGrpInstanceId TQosQGrpInstanceIDorZero
  vRtrIfQosIngFpRedirectQGrp TNamedItemOrEmpty
  vRtrIfQosIngQGrpInstanceId TQosQGrpInstanceIDorZero

VRtrDnsEntry  
SEQUENCE    
  vRtrDnsLastCh TimeStamp
  vRtrDnsRowStatus RowStatus
  vRtrDnsAdminState TmnxEnabledDisabled
  vRtrDnsPrimaryAddrType InetAddressType
  vRtrDnsPrimaryAddr InetAddress
  vRtrDnsSecondaryAddrType InetAddressType
  vRtrDnsSecondaryAddr InetAddress
  vRtrDnsTertiaryAddrType InetAddressType
  vRtrDnsTertiaryAddr InetAddress
  vRtrDnsIpv4SourceAddr InetAddressIPv4
  vRtrDnsIpv6SourceAddr InetAddressIPv6

VRtrInetAllCidrRteTnlExtEntry  
SEQUENCE    
  vRtrInetAllCidrRteTnlNxtHopType TmnxInetCidrNextHopType
  vRtrInetAllCidrRteTnlNxtHopOwner TmnxInetCidrNextHopOwner
  vRtrInetAllCidrRteTnlNxtHopTnlId Unsigned32
  vRtrInetAllCidrRteTnlEnabledTime TimeStamp

VRtrIfBfdSessExtEntry  
SEQUENCE    
  vRtrIfBfdSessExtLinkType INTEGER
  vRtrIfBfdSessExtRxInfoId Unsigned32
  vRtrIfBfdSessExtLclAddrType InetAddressType
  vRtrIfBfdSessExtLclAddr InetAddress
  vRtrIfBfdSessExtRemAddrType InetAddressType
  vRtrIfBfdSessExtRemAddr InetAddress
  vRtrIfBfdSessExtOperState TmnxOperState
  vRtrIfBfdSessExtState INTEGER
  vRtrIfBfdSessExtOperFlags BITS
  vRtrIfBfdSessExtMesgRecv Counter32
  vRtrIfBfdSessExtMesgSent Counter32
  vRtrIfBfdSessExtLastDownTime TimeStamp
  vRtrIfBfdSessExtLastUpTime TimeStamp
  vRtrIfBfdSessExtUpCount Counter32
  vRtrIfBfdSessExtDownCount Counter32
  vRtrIfBfdSessExtLclDisc Unsigned32
  vRtrIfBfdSessExtRemDisc Unsigned32
  vRtrIfBfdSessExtProtocols BITS
  vRtrIfBfdSessExtTxInterval Unsigned32
  vRtrIfBfdSessExtRxInterval Unsigned32
  vRtrIfBfdSessExtType INTEGER
  vRtrIfBfdSessExtVerMismatch Counter32
  vRtrIfBfdSessExtTimeSinceLastRx Unsigned32
  vRtrIfBfdSessExtTimeSinceLastTx Unsigned32
  vRtrIfBfdSessExtRemoteLspNum Unsigned32
  vRtrIfBfdSessExtRemoteTunnelNum Unsigned32
  vRtrIfBfdSessExtRemoteNodeId TmnxMplsTpNodeID
  vRtrIfBfdSessExtRemoteGlobalId TmnxMplsTpGlobalID
  vRtrIfBfdSessExtLspPathTunnelId Unsigned32
  vRtrIfBfdSessExtLspPathId INTEGER

Defined Values

timetraVRtrMIBModule 1.3.6.1.4.1.6527.1.1.3.3
This document is the SNMP MIB module to manage and provision the Alcatel-Lucent SROS device transport and virtual routers, their interfaces, and other related features. Copyright 2003-2013 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxVRtrObjs 1.3.6.1.4.1.6527.3.1.2.3
OBJECT IDENTIFIER    

tmnxVRtrMobGatewayObjs 1.3.6.1.4.1.6527.3.1.2.3.69
OBJECT IDENTIFIER    

tmnxVRtrConformance 1.3.6.1.4.1.6527.3.1.1.3
OBJECT IDENTIFIER    

tmnxVRtrNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.3
OBJECT IDENTIFIER    

tmnxVRtrNotifications 1.3.6.1.4.1.6527.3.1.3.3.0
OBJECT IDENTIFIER    

tmnxVRtrGlobalObjs 1.3.6.1.4.1.6527.3.1.2.3.15
OBJECT IDENTIFIER    

vRtrNextVRtrID 1.3.6.1.4.1.6527.3.1.2.3.15.1
The vRtrNextVRtrID object is used to assign values to vRtrID to be used to create a new row in the vRtrConfTable as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrConfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
Status: current Access: read-create
OBJECT-TYPE    
  TestAndIncr  

vRtrConfiguredVRtrs 1.3.6.1.4.1.6527.3.1.2.3.15.2
The value of vRtrConfiguredVRtrs indicates the current number of virtual routers configured in the system and represented as rows in the vRtrConfTable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrActiveVRtrs 1.3.6.1.4.1.6527.3.1.2.3.15.3
The value of vRtrActiveVRtrs indicates the current number of virtual routers in the system with vRtrAdminState equal 'inService'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrRouteThresholdSoakTime 1.3.6.1.4.1.6527.3.1.2.3.15.4
Following the generation of a tmnxVRtrHighRouteTCA notification, the value of vRtrRouteThresholdSoakTime indicates the soak interval in seconds before another tmnxVRtrHighRouteTCA notification will be re-issued. Imposing this soak period prevents continuous generation of notifications by the agent in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrHighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrMidRouteThreshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

vRtrMaxARPEntries 1.3.6.1.4.1.6527.3.1.2.3.15.5
vRtrMaxARPEntries indicates the maximum number of active and inactive ARP entries supported across all virtual routers in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIPv6RouteThresholdSoakTime 1.3.6.1.4.1.6527.3.1.2.3.15.6
The value of object vRtrIPv6RouteThresholdSoakTime specifies the soak interval in seconds before another tmnxVRtrIPv6HighRouteTCA notification will be re-issued, after the generation of a tmnxVRtrIPv6HighRouteTCA notification. Imposing this soak period prevents continuous generation of notifications by the agent, in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrIPv6HighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrIPv6MidRouteThreshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

vRtrConfTable 1.3.6.1.4.1.6527.3.1.2.3.1
The vRtrConfTable has an entry for each virtual router configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrConfEntry

vRtrConfEntry 1.3.6.1.4.1.6527.3.1.2.3.1.1
Each row entry represents a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing vRtrRowStatus, vRtrName and vRtrType. Note that rows in this table are usually created by the agent itself as a side affect of some other configuration; for example, when a service vprn is created by setting the appropriate objects in the TIMETRA-SERV-MIB. There will always be at least two row entries in this table, one of these entries represents the base or transport router and the other represents the management router. These entries are created when the system is initialized and can never be deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrConfEntry  

vRtrID 1.3.6.1.4.1.6527.3.1.2.3.1.1.1
The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxVRtrID  

vRtrRowStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.2
The row status. The creation or deletion of a virtual router entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID value. Note that it is not allowed to 'destroy' the row entry for vRtrID = 1. In order for row creation to succeed, values for vRtrName and vRtrType must be included in the same SNMP SET PDU as vRtrRowStatus.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrAdminState 1.3.6.1.4.1.6527.3.1.2.3.1.1.3
The desired administrative state for this virtual router. Note that it is not allowed to set vRtrAdminState to 'outOfService for the row entry with vRtrID = 1.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrName 1.3.6.1.4.1.6527.3.1.2.3.1.1.4
The administritive name for this virtual router. The router name must be unique among all virtual routers in the system. For row creation to succeed a value must be specified for vRtrName. When a row is created in the vRtrConfTable for a service vprn (i.e. when vRtrType is set to 'vprn'), the agent automatically assigns the name 'vprn'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrMaxNumRoutes 1.3.6.1.4.1.6527.3.1.2.3.1.1.5
The maximum number of routes that can be configured on this virtual router. If the value is -1, then there is no limit.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..7FFFFFFF  

vRtrBgpStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.6
The desired state for BGP on this virtual router. An attempt to set vRtrBgpStatus to 'delete' will fail if the BGP protocol is not in the administrative outOfService state.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrMplsStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.7
The desired state for MPLS on this virtual router. An attempt to set vRtrMplsStatus to 'delete' will fail if the MPLS protocol is not in the administrative outOfService state, i.e. TIMETRA-MPLS-MIB::vRtrMplsGeneralAdminState must be set to 'outOfService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrOspfStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.8
The desired state for OSPFv2 on this virtual router. An attempt to set vRtrOspfStatus to 'delete' will fail if the OSPFv2 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrRipStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.9
The desired state for RIP on this virtual router. An attempt to set vRtrRipStatus to 'delete' will fail if the RIP protocol is not in the admininistrative outOfService state.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrRsvpStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.10
The desired state for RSVP on this virtual router. An attempt to set vRtrRsvpStatus to 'delete' will fail if the RSVP protocol is not in the administrative outOfService state, i.e. TIMETRA-RSVP-MIB::vRtrRsvpGeneralAdminState must be set to 'outOfService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrEcmpMaxRoutes 1.3.6.1.4.1.6527.3.1.2.3.1.1.11
The value of vRtrEcmpMaxRoutes specifies the maximum number of equal cost routes allowed on this routing table instance. When the number ecmp routes available at the best preference value exceed the number of vRtrEcmpMaxRoutes allowed, then the lowest next-hop IP address algorithm is used to select the ecmp routes used. When vRtrEcmpMaxRoutes is set to zero (0), and multiple routes are available with the same best preference value and equal cost values, then the route with the lowest next-hop IP address is used.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..32  

vRtrAS 1.3.6.1.4.1.6527.3.1.2.3.1.1.12
The value of vRtrAS specifies the autonomous system number to be advertised to this peer. This object is MUST be set before BGP can be activated. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrAS4Byte.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TmnxBgpAutonomousSystem  

vRtrNewIfIndex 1.3.6.1.4.1.6527.3.1.2.3.1.1.13
This object is used to assign values to vRtrIfIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrIfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
Status: current Access: read-create
OBJECT-TYPE    
  TestAndIncr  

vRtrLdpStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.14
The desired state for LDP on this virtual router. An attempt to set vRtrLdpStatus to 'delete' will fail if the LDP protocol is not in the administrative outOfService state, i.e. TIMETRA-LDP-MIB::vRtrLdpGenAdminState must be set to 'outOfService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrIsIsStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.15
The desired state for ISIS on this virtual router. An attempt to set vRtrIsIsStatus to 'delete' will fail if the ISIS protocol is not in the administrative outOfService state.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrRouterId 1.3.6.1.4.1.6527.3.1.2.3.1.1.16
A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrTriggeredPolicy 1.3.6.1.4.1.6527.3.1.2.3.1.1.17
If the value of vRtrTriggeredPolicy is 'false', all routing protocols automatically reevaluate their routes when the route policies are changed. If this value is 'true', then the user must trigger the recalculation of routes when the route policies are changed.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrConfederationAS 1.3.6.1.4.1.6527.3.1.2.3.1.1.18
The value of vRtrConfederationAS specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrConfederationAS4Byte.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TmnxBgpAutonomousSystem  

vRtrRouteDistinguisher 1.3.6.1.4.1.6527.3.1.2.3.1.1.19
The value of vRtrRouteDistinguisher is an identifier attached to routes that distinguishes to which VPN it belongs. The VPRN cannot be operationally 'inService' until a route distinguisher has been assigned.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxVPNRouteDistinguisher  

vRtrMidRouteThreshold 1.3.6.1.4.1.6527.3.1.2.3.1.1.20
The value of vRtrMidRouteThreshold specifies the mid-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

vRtrHighRouteThreshold 1.3.6.1.4.1.6527.3.1.2.3.1.1.21
The value of vRtrHighRouteThreshold specifies the high-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrHighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

vRtrIllegalLabelThreshold 1.3.6.1.4.1.6527.3.1.2.3.1.1.22
The value of vRtrIllegalLabelThreshold specifies the allowed limit for illegal label violations on this VRF. When this limit is exceeded a tmnxVRtrIllegalLabelTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

vRtrVpnId 1.3.6.1.4.1.6527.3.1.2.3.1.1.23
The value of vRtrVpnId is the Virtual Private Network Identifier of this virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxVPNId  

vRtrDescription 1.3.6.1.4.1.6527.3.1.2.3.1.1.25
The value of vRtrDescription is a user provided description string for this virtual router. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

vRtrGracefulRestart 1.3.6.1.4.1.6527.3.1.2.3.1.1.26
The value of vRtrGracefulRestart indicates whether or not graceful restart capabilities are enabled on this virtual router. In order for any protocol to perform graceful restart vRtrGracefulRestart must have a value of 'true'. Graceful restart capabilities can then be enabled or disabled on an individual protocol basis.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrGracefulRestartType 1.3.6.1.4.1.6527.3.1.2.3.1.1.27
The value of vRtrGracefulRestartType specifies when to include grace restart of routing protocols as a result of a switchover from primary CPM in a redundant system. 'never' - always switch without graceful restart 'manual' - perform graceful restart only on a forced switchover 'automatic' - perform graceful restart on either a switchover caused by an error or a forced switchover
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER never(0), manual(1), automatic(2)  

vRtrType 1.3.6.1.4.1.6527.3.1.2.3.1.1.28
The value of vRtrType specifies the type of virtual router represented by this row entry. When a row is created in this table using 'createAndGo', vRtrType must be specified or the row creation will fail. Only the value of 'vr (3)' can be set with a SNMP SET request. The other values are used for row entries created internally by the agent. The value of vRtrType cannot be modified if vRtrRowStatus has a value of 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), baseRouter(1), vprn(2), vr(3)  

vRtrServiceId 1.3.6.1.4.1.6527.3.1.2.3.1.1.29
When vRtrType has a value of 'vprn', the value of vRtrServiceId indicates the service-id of the associated service that created this row entry.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxServId  

vRtrCustId 1.3.6.1.4.1.6527.3.1.2.3.1.1.30
When vRtrType has a value of 'vprn', the value of vRtrCustId indicates the customer-id of the associated service that created this row entry.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxCustId  

vRtrIgmpStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.31
The desired state for IGMP on this virtual router. An attempt to set vRtrIgmpStatus to 'delete' will fail if the IGMP protocol is not in the administrative outOfService state, i.e. TIMETRA-IGMP-MIB::vRtrIgmpGenAdminState must be set to 'outOfService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrMaxNumRoutesLogOnly 1.3.6.1.4.1.6527.3.1.2.3.1.1.32
The value of vRtrMaxNumRoutesLogOnly specifies the action to be taken when the maximum number of routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrVrfTarget 1.3.6.1.4.1.6527.3.1.2.3.1.1.33
The value of vRtrVrfTarget specifies the extended community name for the default vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrVrfExportTarget or vRtrVrfImportTarget has been set.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrVrfExportTarget 1.3.6.1.4.1.6527.3.1.2.3.1.1.34
The value of vRtrVrfExportTarget specifies the extended community name for the default vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrVrfImportTarget 1.3.6.1.4.1.6527.3.1.2.3.1.1.35
The value of vRtrVrfImportTarget specifies the extended community name for the default vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrPimStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.36
The desired state for PIM on this virtual router. When the object is set to 'create', PIM protocol instance is enabled on the virtual router. Setting the value to 'delete' disables PIM on the virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrMaxMcastNumRoutes 1.3.6.1.4.1.6527.3.1.2.3.1.1.37
The maximum number of multicast routes that can be configured on this virtual router. If the value is -1, then there is no limit.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..7FFFFFFF  

vRtrMaxMcastNumRoutesLogOnly 1.3.6.1.4.1.6527.3.1.2.3.1.1.38
The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to be taken when the maximum number of multicast routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new multicast routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrMcastMidRouteThreshold 1.3.6.1.4.1.6527.3.1.2.3.1.1.39
The value of vRtrMcastMidRouteThreshold specifies the mid-level water marker for the number of multicast routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

vRtrIgnoreIcmpRedirect 1.3.6.1.4.1.6527.3.1.2.3.1.1.40
If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual router will drop all ICMP Redirects received on the management interface. If the value of vRtrIgnoreIcmpRedirect is 'false' and an ICMP Redirect is received on the management interface, a /32 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrOspfv3Status 1.3.6.1.4.1.6527.3.1.2.3.1.1.41
The desired state for OSPFv3 on this virtual router. An attempt to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrMsdpStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.42
The desired state for Msdp on this virtual router. An attempt to set vRtrMsdpStatus to 'delete' will fail if the Msdp protocol is not in the administrative outOfService state, i.e. TIMETRA-MSDP-MIB::tmnxMsdpAdminState must be set to 'outOfService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrVprnType 1.3.6.1.4.1.6527.3.1.2.3.1.1.43
The value of vRtrVprnType specifies how traffic is routed. regular (1) - All traffic is routed to all destinations. hub (2) - Network traffic is routed only to the access side. Access traffic is routed to all destinations. spoke (3) - Networks traffic is routed to all destinations. Access traffic is routed only to the network side. subscriberSplitHorizon (4) - Subscriber-interface traffic is routed only to the network side. All other traffic is routed to all destinations. This object cannot be modified if vRtrType is not 'vprn'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER regular(1), hub(2), spoke(3), subscriberSplitHorizon(4)  

vRtrSecondaryVrfId 1.3.6.1.4.1.6527.3.1.2.3.1.1.44
The unique value of vRtrSecondaryVrfId specifies the secondary vrf-id for hub and spoke vprn. Non-zero value of vRtrSecondaryVrfId indicates that two route-tables exist for hub and spoke vprn system one each for hub and spoke. One of which is indexed by vRtrSecondaryVrfId. If the value of vRtrSecondaryVrfId is zero, it indicates that there is only one route-table for hub and spoke vprn system.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxVRtrIDOrZero  

vRtrMldStatus 1.3.6.1.4.1.6527.3.1.2.3.1.1.45
The desired state for Multicast Listener Discovery (MLD) Protocol on this virtual router. An attempt to set vRtrMldStatus to 'delete' will fail if the MLD protocol is not in the administrative outOfService state, i.e. TIMETRA-MLD-MIB::vRtrMldGenAdminState must be set to 'outOfService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrIPv6MaxNumRoutes 1.3.6.1.4.1.6527.3.1.2.3.1.1.46
The maximum number of IPv6 routes that can be configured on this virtual router. If the value is -1, then there is no limit. This object is not supported on SR-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..7FFFFFFF  

vRtrIPv6MidRouteThreshold 1.3.6.1.4.1.6527.3.1.2.3.1.1.47
The value of vRtrIPv6MidRouteThreshold specifies the mid-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

vRtrIPv6HighRouteThreshold 1.3.6.1.4.1.6527.3.1.2.3.1.1.48
The value of vRtrIPv6HighRouteThreshold specifies the high-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

vRtrIPv6MaxNumRoutesLogOnly 1.3.6.1.4.1.6527.3.1.2.3.1.1.49
The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to be taken when the maximum number of IPv6 routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIPv6IgnoreIcmpRedirect 1.3.6.1.4.1.6527.3.1.2.3.1.1.50
If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual router will drop all IPv6 ICMP Redirects received on the management interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false' and an IPv6 ICMP Redirect is received on the management interface, a /128 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIPv6IgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrMcPathMgmtPlcyName 1.3.6.1.4.1.6527.3.1.2.3.1.1.51
The value of vRtrMcPathMgmtPlcyName specifies the multicast policy name configured on this virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItem  

vRtrIgnoreNextHopMetric 1.3.6.1.4.1.6527.3.1.2.3.1.1.52
The value of vRtrIgnoreNextHopMetric specifies whether next-hop metric should be ignored when computing ECMP paths for VPRN routes.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrMvpnVrfTarget 1.3.6.1.4.1.6527.3.1.2.3.1.1.53
The value of vRtrMvpnVrfTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrMvpnVrfExportTarget or vRtrMvpnVrfImportTarget has been set.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrMvpnVrfExportTarget 1.3.6.1.4.1.6527.3.1.2.3.1.1.54
The value of vRtrMvpnVrfExportTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrMvpnVrfTarget has been set.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrMvpnVrfImportTarget 1.3.6.1.4.1.6527.3.1.2.3.1.1.55
The value of vRtrMvpnVrfImportTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrMvpnVrfTarget has been set.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrMvpnVrfTargetUnicast 1.3.6.1.4.1.6527.3.1.2.3.1.1.56
The value of vRtrMvpnVrfTargetUnicast specifies whether unicast vrf-target extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfTarget extended community is used for MVPN.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrMvpnVrfExportTargetUnicast 1.3.6.1.4.1.6527.3.1.2.3.1.1.57
The value of vRtrMvpnVrfExportTargetUnicast specifies whether unicast vrf-target import extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfExportTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfExportTarget extended community is used for MVPN.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrMvpnVrfImportTargetUnicast 1.3.6.1.4.1.6527.3.1.2.3.1.1.58
The value of vRtrMvpnVrfImportTargetUnicast specifies whether unicast vrf-target export extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfImportTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfImportTarget extended community is used for MVPN.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrAS4Byte 1.3.6.1.4.1.6527.3.1.2.3.1.1.59
The value of vRtrAS4Byte specifies the autonomous system number to be advertised to this peer. This object MUST be set before BGP can be activated.
Status: current Access: read-create
OBJECT-TYPE    
  InetAutonomousSystemNumber  

vRtrConfederationAS4Byte 1.3.6.1.4.1.6527.3.1.2.3.1.1.60
The value of vRtrConfederationAS4Byte specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS.
Status: current Access: read-create
OBJECT-TYPE    
  InetAutonomousSystemNumber  

vRtrMvpnCMcastImportRT 1.3.6.1.4.1.6527.3.1.2.3.1.1.61
The value of vRtrMvpnCMcastImportRT indicates C-multicast Import Route that uniquely identifies a VRF. vRtrMvpnCMcastImportRT controls imports of C-multicast routes into a particular VRF. A PE that has sites of a given MVPN connected to it needs to communicate the value of the C-multicast Import RT associated with the VRF of that MVPN on the PE to all other PEs that have sites of that MVPN. A PE that originates a (unicast) route to VPN-IP addresses must include in the BGP Update message the value of the C-multicast Import RT of the VRF associated with the route.
Status: current Access: read-only
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrInterASMvpn 1.3.6.1.4.1.6527.3.1.2.3.1.1.64
When the object vRtrType has a value of 'vprn', the value of vRtrInterASMvpn indicates whether the VPRN service is used for inter-AS MVPN or not. If the value of the object is 'true', it indicates that the vprn service is used for inter-AS MVPN only. If the value of the object is 'false', it indicates that the vprn service is not used for inter-AS MVPN.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrPolicyTable 1.3.6.1.4.1.6527.3.1.2.3.16
The vRtrPolicyTable has an entry for each virtual router configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrPolicyEntry

vRtrPolicyEntry 1.3.6.1.4.1.6527.3.1.2.3.16.1
Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrPolicyEntry  

vRtrImportPolicy1 1.3.6.1.4.1.6527.3.1.2.3.16.1.1
The value of vRtrImportPolicy1 is the name of the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy1.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrImportPolicy2 1.3.6.1.4.1.6527.3.1.2.3.16.1.2
The value of vRtrImportPolicy2 is the name of the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy2.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrImportPolicy3 1.3.6.1.4.1.6527.3.1.2.3.16.1.3
The value of vRtrImportPolicy3 is the name of the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy3.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrImportPolicy4 1.3.6.1.4.1.6527.3.1.2.3.16.1.4
The value of vRtrImportPolicy4 is the name of the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy4.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrImportPolicy5 1.3.6.1.4.1.6527.3.1.2.3.16.1.5
The value of vRtrImportPolicy5 is the name of the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy5.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrExportPolicy1 1.3.6.1.4.1.6527.3.1.2.3.16.1.6
The value of vRtrExportPolicy1 is the name of the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy1.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrExportPolicy2 1.3.6.1.4.1.6527.3.1.2.3.16.1.7
The value of vRtrExportPolicy2 is the name of the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy2.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrExportPolicy3 1.3.6.1.4.1.6527.3.1.2.3.16.1.8
The value of vRtrExportPolicy3 is the name of the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy3.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrExportPolicy4 1.3.6.1.4.1.6527.3.1.2.3.16.1.9
The value of vRtrExportPolicy4 is the name of the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy4.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrExportPolicy5 1.3.6.1.4.1.6527.3.1.2.3.16.1.10
The value of vRtrExportPolicy4 is the name of the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy5.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnImportPolicy1 1.3.6.1.4.1.6527.3.1.2.3.16.1.11
The value of vRtrMvpnImportPolicy1 is the name of the first policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy1.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnImportPolicy2 1.3.6.1.4.1.6527.3.1.2.3.16.1.12
The value of vRtrMvpnImportPolicy2 is the name of the second policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy2.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnImportPolicy3 1.3.6.1.4.1.6527.3.1.2.3.16.1.13
The value of vRtrMvpnImportPolicy3 is the name of the third policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy3.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnImportPolicy4 1.3.6.1.4.1.6527.3.1.2.3.16.1.14
The value of vRtrMvpnImportPolicy4 is the name of the fourth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy4.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnImportPolicy5 1.3.6.1.4.1.6527.3.1.2.3.16.1.15
The value of vRtrMvpnImportPolicy5 is the name of the fifth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy5.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnExportPolicy1 1.3.6.1.4.1.6527.3.1.2.3.16.1.16
The value of vRtrMvpnExportPolicy1 is the name of the first policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy1.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnExportPolicy2 1.3.6.1.4.1.6527.3.1.2.3.16.1.17
The value of vRtrMvpnExportPolicy2 is the name of the second policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy2.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnExportPolicy3 1.3.6.1.4.1.6527.3.1.2.3.16.1.18
The value of vRtrMvpnExportPolicy3 is the name of the third policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy3.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnExportPolicy4 1.3.6.1.4.1.6527.3.1.2.3.16.1.19
The value of vRtrMvpnExportPolicy4 is the name of the fourth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy4.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnExportPolicy5 1.3.6.1.4.1.6527.3.1.2.3.16.1.20
The value of vRtrMvpnExportPolicy5 is the name of the fifth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy5.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnImportPolicyUnicast 1.3.6.1.4.1.6527.3.1.2.3.16.1.21
The value of vRtrMvpnImportPolicyUnicast specifies whether unicast vrf-import policy is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrImportPolicy1 through vRtrImportPolicy5 are used for MVPN. If the value is 'false', vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5 are used for MVPN.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrMvpnExportPolicyUnicast 1.3.6.1.4.1.6527.3.1.2.3.16.1.22
The value of vRtrMvpnExportPolicyUnicast specifies whether unicast vrf-export policy is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrExportPolicy1 through vRtrExportPolicy5 is used for MVPN. If the value is 'false', vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5 is used for MVPN.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrGrtMaxExportRoutes 1.3.6.1.4.1.6527.3.1.2.3.16.1.23
The value of vRtrGrtMaxExportRoutes specifies the maximum number of routes that can be exported from the VRF to the GRT.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1000  

vRtrGrtExportPolicy1 1.3.6.1.4.1.6527.3.1.2.3.16.1.24
The value of vRtrGrtExportPolicy1 specifies the name of the first policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrGrtExportPolicy2 1.3.6.1.4.1.6527.3.1.2.3.16.1.25
The value of vRtrGrtExportPolicy2 specifies the name of the second policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrGrtExportPolicy3 1.3.6.1.4.1.6527.3.1.2.3.16.1.26
The value of vRtrGrtExportPolicy3 specifies the name of the third policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrGrtExportPolicy4 1.3.6.1.4.1.6527.3.1.2.3.16.1.27
The value of vRtrGrtExportPolicy4 specifies the name of the fourth policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrGrtExportPolicy5 1.3.6.1.4.1.6527.3.1.2.3.16.1.28
The value of vRtrGrtExportPolicy5 specifies the name of the fifth policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrGrtMaxIpv6ExportRoutes 1.3.6.1.4.1.6527.3.1.2.3.16.1.29
The value of vRtrGrtMaxIpv6ExportRoutes specifies the maximum number of IPv6 routes that can be exported from the VRF to the GRT. When the value of this object is set to '0', there is no limit on the number of routes exported from the VRF to the GRT.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1000  

vRtrStatTable 1.3.6.1.4.1.6527.3.1.2.3.2
The vRtrStatTable has an entry for each virtual router configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrStatEntry

vRtrStatEntry 1.3.6.1.4.1.6527.3.1.2.3.2.1
Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrStatEntry  

vRtrOperState 1.3.6.1.4.1.6527.3.1.2.3.2.1.1
vRtrOperState indicates current operational status of this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrDirectRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.2
vRtrDirectRoutes indicates the current number of direct routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrDirectActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.3
vRtrDirectActiveRoutes indicates the current number of active direct routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStaticRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.4
vRtrStaticRoutes indicates the current number of static routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStaticActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.5
vRtrStaticActiveRoutes indicates the current number of active static routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrOSPFRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.6
vRtrOSPFRoutes indicates the current number of ospf routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrOSPFActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.7
vRtrOSPFActiveRoutes indicates the current number of active ospf routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrBGPRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.8
vRtrBGPRoutes indicates the current number of bgp routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrBGPActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.9
vRtrBGPActiveRoutes indicates the current number of active bgp routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrISISRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.10
vRtrISISRoutes indicates the current number of isis routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrISISActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.11
vRtrISISActiveRoutes indicates the current number of active isis routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrRIPRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.12
vRtrRIPRoutes indicates the current number of rip routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrRIPActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.13
vRtrRIPActiveRoutes indicates the current number of active rip routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrAggregateRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.14
vRtrAggregateRoutes indicates the current number of aggregate routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrAggregateActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.15
vRtrAggregateActiveRoutes indicates the current number of active aggregate routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatConfiguredIfs 1.3.6.1.4.1.6527.3.1.2.3.2.1.16
vRtrStatConfiguredIfs indicates the current number of router interfaces configured on this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatActiveIfs 1.3.6.1.4.1.6527.3.1.2.3.2.1.17
vRtrStatActiveIfs indicates the current number of router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatIllegalLabels 1.3.6.1.4.1.6527.3.1.2.3.2.1.18
vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrStatCurrNumRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.19
vRtrStatCurrNumRoutes indicates the current number of routes in the VRF for this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatBGPVpnRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.20
vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes learned by MP-BGP for this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatBGPVpnActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.21
vRtrStatBGPVpnActiveRoutes indicates the current number of active VPN-IPV4 routes learned by MP-BGP for this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatTotalLdpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.22
vRtrStatTotalLdpTunnels indicates the current number of both active and inactive LDP tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatTotalSdpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.23
vRtrStatTotalSdpTunnels indicates the current number of both active and inactive SDP tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatActiveLdpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.24
vRtrStatActiveLdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatActiveSdpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.25
vRtrStatActiveSdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrMulticastRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.26
vRtrMulticastRoutes indicates the current number of rows in the vRtrPimNgGrpSrcTable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatActiveARPEntries 1.3.6.1.4.1.6527.3.1.2.3.2.1.27
vRtrStatActiveARPEntries indicates the number of active ARP entries for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatTotalARPEntries 1.3.6.1.4.1.6527.3.1.2.3.2.1.28
vRtrStatTotalARPEntries indicates the total number of active and inactive ARP entries for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6DirectRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.29
vRtrV6DirectRoutes indicates the current number of v6 direct routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6DirectActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.30
vRtrV6DirectActiveRoutes indicates the current number of v6 active direct routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StaticRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.31
vRtrV6StaticRoutes indicates the current number of v6 static routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StaticActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.32
vRtrV6StaticActiveRoutes indicates the current number of v6 active static routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6OSPFRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.33
vRtrV6OSPFRoutes indicates the current number of v6 ospf routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6OSPFActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.34
vRtrV6OSPFActiveRoutes indicates the current number of v6 active ospf routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6BGPRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.35
vRtrV6BGPRoutes indicates the current number of v6 bgp routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6BGPActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.36
vRtrV6BGPActiveRoutes indicates the current number of v6 active bgp routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6ISISRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.37
vRtrV6ISISRoutes indicates the current number of v6 isis routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6ISISActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.38
vRtrV6ISISActiveRoutes indicates the current number of v6 active isis routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6RIPRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.39
vRtrV6RIPRoutes indicates the current number of v6 rip routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6RIPActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.40
vRtrV6RIPActiveRoutes indicates the current number of active v6 rip routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6AggregateRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.41
vRtrV6AggregateRoutes indicates the current number of v6 aggregate routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6AggregateActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.42
vRtrV6AggregateActiveRoutes indicates the current number of active v6 aggregate routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatConfiguredIfs 1.3.6.1.4.1.6527.3.1.2.3.2.1.43
vRtrV6StatConfiguredIfs indicates the current number of v6 router interfaces configured on this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatActiveIfs 1.3.6.1.4.1.6527.3.1.2.3.2.1.44
vRtrV6StatActiveIfs indicates the current number of v6 router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatIllegalLabels 1.3.6.1.4.1.6527.3.1.2.3.2.1.45
vRtrV6StatIllegalLabels indicates the number of illegally received v6 labels on this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrV6StatCurrNumRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.46
vRtrV6StatCurrNumRoutes indicates the current number of v6 routes in the VRF for this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatBGPVpnRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.47
vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes learned by MP-BGP for this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatBGPVpnActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.48
vRtrV6StatBGPVpnActiveRoutes indicates the current number of active VPN-IPV6 routes learned by MP-BGP for this virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatTotalLdpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.49
vRtrV6StatTotalLdpTunnels indicates the current number of both active and inactive v6 LDP tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatTotalSdpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.50
vRtrV6StatTotalSdpTunnels indicates the current number of both active and inactive v6 SDP tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatActiveLdpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.51
vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatActiveSdpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.52
vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6MulticastRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.53
vRtrV6MulticastRoutes indicates the current number of v6 rows in the vRtrPimNgGrpSrcTable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatActiveNbrEntries 1.3.6.1.4.1.6527.3.1.2.3.2.1.54
vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor discovery entries for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatTotalNbrEntries 1.3.6.1.4.1.6527.3.1.2.3.2.1.55
vRtrV6StatTotalNbrEntries indicates the total number of active and inactive v6 neighbor discovery entries for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrSubMgmtRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.56
The value of vRtrSubMgmtRoutes indicates the total number of subscriber management routes in the route Table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrSubMgmtActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.57
The value of vRtrSubMgmtActiveRoutes indicates the number of active subscriber management routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatTotalRsvpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.58
The value of vRtrStatTotalRsvpTunnels indicates the current number of both active and inactive RSVP tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatActiveRsvpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.59
The value of vRtrStatActiveRsvpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatTotalRsvpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.60
The value of vRtrV6StatTotalRsvpTunnels indicates the current number of both active and inactive IPv6 RSVP tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatActiveRsvpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.61
The value of vRtrV6StatActiveRsvpTunnels indicates the current number of IPv6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrHostRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.62
The value of vRtrHostRoutes indicates the current number of direct routes with prefix value 32 for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrHostActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.63
The value of vRtrHostActiveRoutes indicates the current number of active direct routes with prefix value 32 for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6HostRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.64
The value of vRtrV6HostRoutes indicates the current number of v6 direct routes with prefix value 128 for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6HostActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.65
The value of vRtrV6HostActiveRoutes indicates the current number of v6 active direct routes with prefix value 128 for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatLocalARPEntries 1.3.6.1.4.1.6527.3.1.2.3.2.1.66
The value of vRtrStatLocalARPEntries indicates the total number of active and inactive local ARP entries for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatStaticARPEntries 1.3.6.1.4.1.6527.3.1.2.3.2.1.67
The value of vRtrStatStaticARPEntries indicates the total number of active and inactive static ARP entries for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatDynamicARPEntries 1.3.6.1.4.1.6527.3.1.2.3.2.1.68
The value of vRtrStatDynamicARPEntries indicates the total number of active and inactive dynamic ARP entries for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatManagedARPEntries 1.3.6.1.4.1.6527.3.1.2.3.2.1.69
The value of vRtrStatManagedARPEntries indicates the total number of active and inactive managed ARP entries for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatInternalARPEntries 1.3.6.1.4.1.6527.3.1.2.3.2.1.70
The value of vRtrStatInternalARPEntries indicates the total number of active and inactive internal ARP entries for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrManagedRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.71
The value of vRtrManagedRoutes indicates the total number of active and inactive managed routes for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrManagedActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.72
The value of vRtrManagedActiveRoutes indicates the total number of active managed routes for the specified virtual router in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLDPRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.73
vRtrLDPRoutes indicates the current number of ldp routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrLDPActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.74
vRtrLDPActiveRoutes indicates the current number of active ldp routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrVPNLeakRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.75
vRtrVPNLeakRoutes indicates the current number of VPN Leak routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrVPNLeakActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.76
vRtrVPNLeakActiveRoutes indicates the current number of active VPN Leak routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6VPNLeakRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.77
vRtrV6VPNLeakRoutes indicates the current number of v6 VPN Leak routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6VPNLeakActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.78
vRtrV6VPNLeakActiveRoutes indicates the current number of v6 active VPN Leak routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6SubMgmtRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.79
vRtrV6SubMgmtRoutes indicates the current number of v6 subscriber management routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6SubMgmtActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.80
vRtrV6SubMgmtActiveRoutes indicates the current number of v6 active subscriber management routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrMobileHostRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.81
The value of vRtrMobileHostRoutes indicates the current number of IPv4 Mobile Host routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrMobileHostActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.82
The value of vRtrMobileHostActiveRoutes indicates the current number of IPv4 active Mobile Host routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6MobileHostRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.83
The value of vRtrV6MobileHostRoutes indicates the current number of IPv6 Mobile Host routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6MobileHostActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.84
The value of vRtrV6MobileHostActiveRoutes indicates the current number of IPv6 active Mobile Host routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatTotalBgpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.85
vRtrStatTotalBgpTunnels indicates the current number of both active and inactive BGP tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatActiveBgpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.86
vRtrStatActiveBgpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'bgp'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrNatRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.87
The value of vRtrNatRoutes indicates the current number of IPv4 NAT (Network Address Translation) routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrNatActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.88
The value of vRtrNatActiveRoutes indicates the current number of IPv4 NAT routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6NatRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.89
The value of vRtrV6NatRoutes indicates the current number of IPv6 NAT routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6NatActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.90
The value of vRtrV6NatActiveRoutes indicates the current number of IPv6 active NAT routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPeriodicRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.91
The value of vRtrPeriodicRoutes indicates the current number of periodic routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrPeriodicActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.92
The value of vRtrPeriodicActiveRoutes indicates the current number of active periodic routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6PeriodicRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.93
The value of vRtrV6PeriodicRoutes indicates the current number of IPv6 periodic routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6PeriodicActiveRoutes 1.3.6.1.4.1.6527.3.1.2.3.2.1.94
The value of vRtrV6PeriodicActiveRoutes indicates the current number of active IPv6 periodic routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatTotalMplsTpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.97
vRtrStatTotalMplsTpTunnels indicates the current number of both active and inactive MPLS-TP tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatActiveMplsTpTunnels 1.3.6.1.4.1.6527.3.1.2.3.2.1.98
vRtrStatActiveMplsTpTunnels indicates the current number of active MPLS-TP tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrIfTotalNumber 1.3.6.1.4.1.6527.3.1.2.3.3
The number of router interfaces configured in this system.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

vRtrIfTable 1.3.6.1.4.1.6527.3.1.2.3.4
The vRtrIfTable has an entry for each router interface configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfEntry

vRtrIfEntry 1.3.6.1.4.1.6527.3.1.2.3.4.1
Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfEntry  

vRtrIfIndex 1.3.6.1.4.1.6527.3.1.2.3.4.1.1
The unique value which identifies this interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InterfaceIndex  

vRtrIfRowStatus 1.3.6.1.4.1.6527.3.1.2.3.4.1.2
The row status. The creation or deletion of a router interface entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID and vRtrIfIndex values, such as the vRtrIpAddrTable. The router interface is associated to a physical port interface through the vRtrIfPortID and vRtrIfEncapValue variables. The RowStatus cannot be SET to 'active' unless vRtrIfName has been initialized.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrIfType 1.3.6.1.4.1.6527.3.1.2.3.4.1.3
The value of vRtrIfType specifies the type of this interface. Different virtual router interface types are defined as follows: network - defined on a network port. service - used internally. serviceIes - defined on a SAP or Spoke SDP. serviceRtdVpls - obsoleted. serviceVprn - defined on a SAP or Spoke SDP. serviceIesSubscriber - used internally. serviceIesGroup - defined on a SAP serviceVprnSubscriber - used internally. serviceVprnGroup - defined on a SAP. serviceIesRedundant - defined on a Spoke SDP. serviceVprnRedundant - defined on a Spoke SDP. serviceVpls - defined on an IP endpoint for VPLS. serviceIesCem - defined on a SAP. --not supported serviceVprnCem - defined on a SAP. --not supported serviceVprnIPsec - defined on a SAP. serviceVprnIPMirror - defined on a Mirror. serviceVideo - defined on a video SAP. serviceVplsVideo - defined on an IP endpoint for video interface for VPLS. multiHomingPrimary - defined for a primary interface. multiHomingSecondary - defined for a secondary interface. serviceIesTunnel - defined on a SAP. serviceIpReas - defined on a network port. networkIpReas - defined on a network port. networkVprn - network interface defined in a VPRN. tmsService - threat management service interface. serviceIesAarp - defined on an AARP (Assymetry Removal) Spoke SDP. serviceVprnAarp - defined on an AARP Spoke SDP. serviceIesAa - defined on an AA (Application Assurance) SAP. serviceVprnAa - defined on an AA SAP. unnumMplsTp - defined for an unummbered mpls tp interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER network(1), service(2), serviceIes(3), serviceRtdVpls(4), serviceVprn(5), serviceIesSubscriber(6), serviceIesGroup(7), serviceVprnSubscriber(8), serviceVprnGroup(9), serviceIesRedundant(10), serviceVprnRedundant(11), serviceVpls(12), serviceIesCem(13), serviceVprnCem(14), serviceVprnIPsec(15), serviceVprnIPMirror(16), serviceVideo(17), serviceVplsVideo(18), multiHomingPrimary(19), multiHomingSecondary(20), serviceIesTunnel(21), serviceIpReas(22), networkIpReas(23), networkVprn(24), tmsService(25), serviceIesAarp(26), serviceVprnAarp(27), serviceIesAa(28), serviceVprnAa(29), unnumMplsTp(30)  

vRtrIfName 1.3.6.1.4.1.6527.3.1.2.3.4.1.4
The administrative name assigned this router interface. The interface name must be unique among entries with the same vRtrID value. In order for row creation to succeed, a value must also be assigned to vRtrIfName.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItem  

vRtrIfPortID 1.3.6.1.4.1.6527.3.1.2.3.4.1.5
The physical port to which this interface is bound. If vRtrIfPortID is zero (0), then there is no binding between this virtual router interface and a physical port. Once an interface has been bound to a port, several steps are required to change the binding to some other TmnxPortID value. vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to zero (0) to disassociate the interface from the original port binding; finally, set vRtrIfPortID to the value for the new port binding. Setting vRtrIfPortID to 0x20000001 indicates that this interface is the system interface for the device.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxPortID  

vRtrIfChannelID 1.3.6.1.4.1.6527.3.1.2.3.4.1.6
When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID is the STSx channel number used by this interface. If vRtrIfPortID is not a SONET port or the interface has not yet been bound to a physical port, vRtrIfChannelID will be zero (0). This object was obsoleted in release 5.0.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Unsigned32 0..64  

vRtrIfEncapValue 1.3.6.1.4.1.6527.3.1.2.3.4.1.7
The value of the label used along with vRtrIfPortID to identify a SAP on the specified access port.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEncapVal  

vRtrIfAdminState 1.3.6.1.4.1.6527.3.1.2.3.4.1.8
The desired administrative state for this router interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrIfOperState 1.3.6.1.4.1.6527.3.1.2.3.4.1.9
The current operational status of this router interface.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrIfAlias 1.3.6.1.4.1.6527.3.1.2.3.4.1.10
An alternative administrative name assigned this router interface.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

vRtrIfPhysicalAddress 1.3.6.1.4.1.6527.3.1.2.3.4.1.11
The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

vRtrIfArpTimeout 1.3.6.1.4.1.6527.3.1.2.3.4.1.12
The value of vRtrIfArpTimeout determines how long an ARP entry associated with this interface remains in the ARP cache. When vRtrIfArpTimeout has a value of zero, '0', the entry will never be cleared from the cache.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrIfIcmpMaskReply 1.3.6.1.4.1.6527.3.1.2.3.4.1.13
When vRtrIfIcmpMaskReply is set to 'true', a reply will be issued when this node is requested for the network mask for this subnet. The requesting node must be attached to the local network. When vRtrIfIcmpMaskReply is set to 'false', no reply is issued if an ICMP mask request is received.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIcmpRedirects 1.3.6.1.4.1.6527.3.1.2.3.4.1.14
When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not generated.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIcmpNumRedirects 1.3.6.1.4.1.6527.3.1.2.3.4.1.15
The value of vRtrIfIcmpNumRedirects limits the number of redirects issued per the time frame specified in vRtrIfIcmpRedirectsTime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 10..1000  

vRtrIfIcmpRedirectsTime 1.3.6.1.4.1.6527.3.1.2.3.4.1.16
The value of vRtrIfIcmpRedirectsTime determines the time frame in seconds that is used to limit the number of redirects issued per time frame.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60  

vRtrIfIcmpUnreachables 1.3.6.1.4.1.6527.3.1.2.3.4.1.17
When vRtrIfIcmpUnreachables is set to 'true', ICMP host and network unreachable messages are generated by this interface. When vRtrIfIcmpUnreachables is set to 'false', ICMP host and network unreachable messages are not sent.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIcmpNumUnreachables 1.3.6.1.4.1.6527.3.1.2.3.4.1.18
The value of vRtrIfIcmpNumUnreachables determines how many destination unreachable messages are issued in the time frame specified by vRtrIfIcmpUnreachablesTime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 10..1000  

vRtrIfIcmpUnreachablesTime 1.3.6.1.4.1.6527.3.1.2.3.4.1.19
The value of vRtrIfIcmpUnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable messages issued per time frame.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60  

vRtrIfIcmpTtlExpired 1.3.6.1.4.1.6527.3.1.2.3.4.1.20
When vRtrIfIcmpTtlExpired is set to 'true', the rate that ttl-expired messages by this interface is throttled based on the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime. When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired messages are sent.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIcmpNumTtlExpired 1.3.6.1.4.1.6527.3.1.2.3.4.1.21
The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired messages will be issued in the time frame specified by vRtrIfIcmpTtlExpiredTime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 10..1000  

vRtrIfIcmpTtlExpiredTime 1.3.6.1.4.1.6527.3.1.2.3.4.1.22
The value of vRtrIfIcmpTtlExpiredTime sets the time frame in seconds that is used to limit the number of ttl-expired messages issued by this interface with the specified time frame.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60  

vRtrIfNtpBroadcast 1.3.6.1.4.1.6527.3.1.2.3.4.1.23
When vRtrIfNtpBroadcast is set to 'true', NTP/SNTP broadcasts will be received on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfUnnumbered 1.3.6.1.4.1.6527.3.1.2.3.4.1.24
The IP address to be used when generating packets on this interface. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0.0.0.0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null. A value of '255.255.255.255' implies the use of system-ip. It is strongly suggested to use the node's system IP address as it is not associated with a particular physical interface and is therefore always reachable.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfMtu 1.3.6.1.4.1.6527.3.1.2.3.4.1.25
The value of vRtrIfMtu is used to reflect the MTU size of this interface in the header of an ICMP MTU exceeded message when a packet is too large to be transmitted on this interface. The default size is calculated by subtracting the DLC header size from the physical MTU size of the interface. When a SNMP SET request is received with a value of zero (0), the agent actually sets vRtrIfMtu to the calculated default size.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 512..9000  

vRtrIfQosPolicyId 1.3.6.1.4.1.6527.3.1.2.3.4.1.26
The value of vRtrIfQosPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface. This object is obsoleted in release 10.0 and replaced with object vRtrIfQosNetworkPolicyId.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TNetworkPolicyID  

vRtrIfIngressFilterId 1.3.6.1.4.1.6527.3.1.2.3.4.1.27
The value of vRtrIfIngressFilterId associates an ip-filter-id with an ingress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current Access: read-create
OBJECT-TYPE    
  TIPFilterID  

vRtrIfEgressFilterId 1.3.6.1.4.1.6527.3.1.2.3.4.1.28
The value of vRtrIfEgressFilterId associates an ip-filter-id with an egress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current Access: read-create
OBJECT-TYPE    
  TIPFilterID  

vRtrIfDirectedBroadcast 1.3.6.1.4.1.6527.3.1.2.3.4.1.29
When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts directed to this interface to be accepted. When 'false', directed broadcasts are dropped. This is of particular use when preventing denial of service attacks.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfMplsStatus 1.3.6.1.4.1.6527.3.1.2.3.4.1.30
Setting this variable to 'create' causes this interface to be used with MPLS. It also causes a row to be created in the vRtrMplsIfTable. Setting it to 'delete' removes the interface from MPLS and causes the corresponding row in the vRtrMplsIfTable to be removed. However, an attempt to set vRtrIfMplsStatus to 'delete' will fail if MPLS activity on this interface is not administratively in the outOfService state, i.e. vRtrMplsIfAdminState of the vRtrMplsIfTable must be set to 'outOfService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxStatus  

vRtrIfUnnumberedIf 1.3.6.1.4.1.6527.3.1.2.3.4.1.31
The name of the interface to which this unnumbered interface will refer to. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

vRtrIfCflowd 1.3.6.1.4.1.6527.3.1.2.3.4.1.32
The value of vRtrIfCflowd specifies the type and direction of Cflowd analysis applied to this interface. A Cflowd profile controls the sampling and analysis of data flows through the router. A value of 'none (1)' indicates that there is no Cflowd analysis associated with this interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), aclIngressOnly(2), interfaceIngressOnly(3), aclEgressOnly(4), interfaceEgressOnly(5), aclIngressEgress(6), interfaceIngressEgress(7)  

vRtrIfVPNClass 1.3.6.1.4.1.6527.3.1.2.3.4.1.33
The value of vRtrIfVPNClass specifies the type of VPN scenario supported on this virtual router interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), carrierOfCarrier(1), enterprise(2), interProvider(3)  

vRtrIfDescription 1.3.6.1.4.1.6527.3.1.2.3.4.1.34
The value of vRtrIfDescription is a user provided description string for this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-create
OBJECT-TYPE    
  TItemLongDescription  

vRtrIfProtocol 1.3.6.1.4.1.6527.3.1.2.3.4.1.35
The value of vRtrIfProtocol indicates which protocols are running on this virtual router interface. If the bit corresponding to a protocol is set, then the protocol is enabled on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ospfv2(0), rip(1), isis(2), bgp(3), mpls(4), rsvp(5), ldp(6), igmp(7), pim(8), ospf3(9), mld(10)  

vRtrIfTosMarkingTrusted 1.3.6.1.4.1.6527.3.1.2.3.4.1.36
The value of vRtrIfTosMarkingTrusted specifies whether the TOS bits on the packets ingressing on the interface should be trusted by the system or not. If the value is set to 'true', the TOS bits should be trusted. If the system does not trust these packets, it will remark the packets upon egress as indicated by the value of the egress remark flag, TIMETRA-QOS-MIB:: tNetworkPolicyEgressRemark. The egress remark flag is part of the QoS policy applied to the network interface. The interfaces belonging to the IES service have the egress remark flag set to not trusted, 'false', by default. For all other interface types, the TOS bits are trusted by default.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfServiceId 1.3.6.1.4.1.6527.3.1.2.3.4.1.37
The value of vRtrIfServiceId specifies the service id for this interface. This object must always be set at row creation when the vRtrIfType is not network(1). This object cannot be modified once the row is created.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxServId  

vRtrIfArpPopulate 1.3.6.1.4.1.6527.3.1.2.3.4.1.38
The value of the object vRtrIfArpPopulate specifies the ARP populate action. The value disabled means that the normal ARP protocol is active. The value enabled means that the system will not originate ARP requests on this interface. The ARP cache is only populated with MAC addresses learned via the DHCP protocol. If the value of vRtrIfType is network, this object can only be set to disabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

vRtrIfIPv6ConfigAllowed 1.3.6.1.4.1.6527.3.1.2.3.4.1.39
The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this router interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured. Object iesIfIPv6ConfigAllowed should be set if vRtrIfType is 'subscriber' or 'group'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIPv6OperState 1.3.6.1.4.1.6527.3.1.2.3.4.1.40
The current operational status for IPv6 on this router interface.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrIfIPv6IngressFilterId 1.3.6.1.4.1.6527.3.1.2.3.4.1.41
The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id with an ingress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current Access: read-create
OBJECT-TYPE    
  TIPFilterID  

vRtrIfIPv6EgressFilterId 1.3.6.1.4.1.6527.3.1.2.3.4.1.42
The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id with an egress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current Access: read-create
OBJECT-TYPE    
  TIPFilterID  

vRtrIfIcmpV6Redirects 1.3.6.1.4.1.6527.3.1.2.3.4.1.43
When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not generated.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIcmpV6NumRedirects 1.3.6.1.4.1.6527.3.1.2.3.4.1.44
The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects issued per the time frame specified in vRtrIfIcmpV6RedirectsTime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 10..1000  

vRtrIfIcmpV6RedirectsTime 1.3.6.1.4.1.6527.3.1.2.3.4.1.45
The value of vRtrIfIcmpV6RedirectsTime determines the time frame in seconds that is used to limit the number of v6 redirects issued per time frame.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60  

vRtrIfIcmpV6Unreachables 1.3.6.1.4.1.6527.3.1.2.3.4.1.46
When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and network unreachable messages are generated by this interface. When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and network unreachable messages are not sent.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIcmpV6NumUnreachables 1.3.6.1.4.1.6527.3.1.2.3.4.1.47
The value of vRtrIfIcmpV6NumUnreachables determines how many destination unreachable ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6UnreachablesTime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 10..1000  

vRtrIfIcmpV6UnreachablesTime 1.3.6.1.4.1.6527.3.1.2.3.4.1.48
The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable ICMPv6 messages issued per time frame.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60  

vRtrIfIcmpV6TimeExceeded 1.3.6.1.4.1.6527.3.1.2.3.4.1.49
The value of vRtrIfIcmpV6TimeExceeded specifies whether time-exceeded ICMP messages should be sent. When it is set to 'true', ICMPv6 time-exceeded messages are generated by this interface. When vRtrIfIcmpV6TimeExceeded is set to 'false', ICMPv6 time-exceeded messages are not sent.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIcmpV6NumTimeExceeded 1.3.6.1.4.1.6527.3.1.2.3.4.1.50
The value of vRtrIfIcmpV6NumTimeExceeded specifies how many time-exceeded ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6TimeExceededTime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 10..1000  

vRtrIfIcmpV6TimeExceededTime 1.3.6.1.4.1.6527.3.1.2.3.4.1.51
The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame in seconds that is used to limit the number of time-exceeded ICMPv6 messages issued per time frame.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60  

vRtrIfIcmpV6PktTooBig 1.3.6.1.4.1.6527.3.1.2.3.4.1.52
The value of vRtrIfIcmpV6PktTooBig specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this interface. When vRtrIfIcmpV6PktTooBig is set to 'false', ICMPv6 packet-too-big messages are not sent.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIcmpV6NumPktTooBig 1.3.6.1.4.1.6527.3.1.2.3.4.1.53
The value of vRtrIfIcmpV6NumPktTooBig specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6PktTooBigTime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 10..1000  

vRtrIfIcmpV6PktTooBigTime 1.3.6.1.4.1.6527.3.1.2.3.4.1.54
The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60  

vRtrIfIcmpV6ParamProblem 1.3.6.1.4.1.6527.3.1.2.3.4.1.55
The value of vRtrIfIcmpV6ParamProblem specifies whether parameter-problem ICMP messages should be sent. When it is set to 'true', ICMPv6 parameter-problem messages are generated by this interface. When vRtrIfIcmpV6ParamProblem is set to 'false', ICMPv6 parameter-problem messages are not sent.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfIcmpV6NumParamProblem 1.3.6.1.4.1.6527.3.1.2.3.4.1.56
The value of vRtrIfIcmpV6NumParamProblem specifies how many parameter-problem ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6ParamProblemTime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 10..1000  

vRtrIfIcmpV6ParamProblemTime 1.3.6.1.4.1.6527.3.1.2.3.4.1.57
The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame in seconds that is used to limit the number of parameter-problem ICMPv6 messages issued per time frame.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60  

vRtrIfLinkLocalAddressType 1.3.6.1.4.1.6527.3.1.2.3.4.1.58
The value of vRtrIfLinkLocalAddressType indicates the IP address type of the link local address of this virtual router interface. When the value of vRtrIfIPv6OperState is 'inService', this object will have a value of 'ipv6z', and 'unknown' otherwise.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrIfLinkLocalAddress 1.3.6.1.4.1.6527.3.1.2.3.4.1.59
The value of vRtrIfLinkLocalAddress indicates the link local IP address of this virtual router interface. This address valid when the value of vRtrIfIPv6OperState is 'inService'.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|20)  

vRtrIfLinkLocalAddressState 1.3.6.1.4.1.6527.3.1.2.3.4.1.60
The value of vRtrIfLinkLocalAddressState indicates the address state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is 'outOfService', the value of this object is 'unknown'.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetAddrState  

vRtrIfLastOperStateChange 1.3.6.1.4.1.6527.3.1.2.3.4.1.61
The value of vRtrIfLastOperStateChange indicates the sysUpTime when the operational state of this interface last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfOperMtu 1.3.6.1.4.1.6527.3.1.2.3.4.1.62
The value of vRtrIfOperMtu indicates the operational value of the IP MTU on this interface. It is the minimum of the vRtrIfMtu and the MTU of the physical port this interface is bound to.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfGlobalIndex 1.3.6.1.4.1.6527.3.1.2.3.4.1.63
The value of vRtrIfGlobalIndex uniquely identifies this interface in the tmnx system. This field provides an identifier for router interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex is unique within each virtual router. The vRtrIfGlobalIndex is unique system wide regardless of the vRtrID. The vRtrIfGlobalIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..262144  

vRtrIfDelaySeconds 1.3.6.1.4.1.6527.3.1.2.3.4.1.64
The value of vRtrIfDelaySeconds specifies the time in seconds that is used to bring up the interface. When interface comes up, it will not become operational until after the specified delay. When used to configure delayed-enable for a router interface, the values specified for vRtrIfDelaySeconds can be in the range of 0..1200. When used to configure hold-time of a Multi-homing secondary interface, the values specified can be in the range of 0..65535. The default value of vRtrIfDelaySeconds is also based on the router interface type. When used for a regular interface its default value is 0. When used for a Multi-homing secondary interface, its default value is 30.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrIfDelayUpTimer 1.3.6.1.4.1.6527.3.1.2.3.4.1.65
The value of vRtrIfDelayUpTimer indicates the time left before the interface comes up when vRtrIfDelaySeconds is configured to a non-zero value. When the interface is down, this object will return the value -1. It's value can be in the range 0 to vRtrIfDelaySeconds's value if the interface is 'about to come up'. If the interface is up, the value of vRtrIfDelayUpTimer will be 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrIfLocalDhcpServerName 1.3.6.1.4.1.6527.3.1.2.3.4.1.66
The value of vRtrIfLocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrIfInitDelayEnable 1.3.6.1.4.1.6527.3.1.2.3.4.1.67
The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds is used only the next time or everytime the system attempts to bring the interface operationally up. The value of vRtrIfInitDelayEnable is ignored if the value of vRtrIfDelaySeconds is set to 0. The value of vRtrIfInitDelayEnable is only set when interface is of type subscriber-interface. When the value vRtrIfInitDelayEnable is set to 'false', everytime the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds. When the value vRtrIfInitDelayEnable is set to 'true', only the next time the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfCpmProtPolicyId 1.3.6.1.4.1.6527.3.1.2.3.4.1.68
The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy with an interface. A value of zero (0) specifies that no CPM Protection policy is associated with this interface. A value of one (1) specifies that the default CPM Protection policy is associated with this interface. If no value for vRtrIfCpmProtPolicyId is specified when the vRtrIfEntry is created, the system assigns a default value, derived from the value of the object vRtrIfType, as follows: vRtrIfType vRtrIfCpmProtPolicyId --------------------------------------------------------------------- network 1 service used internally. serviceIes 1 serviceRtdVpls obsoleted. serviceVprn 1 serviceIesSubscriber 0 serviceIesGroup 0 serviceVprnSubscriber used internally. serviceVprnGroup 0 serviceIesRedundant 0 serviceVprnRedundant 0 serviceVpls 0 serviceIesCem defined on a SAP. --not supported serviceVprnCem defined on a SAP. --not supported serviceVprnIPsec 0 serviceVprnIPMirror 0 If an interface would get a default value of 'one', it is not allowed to set the value of vRtrIfCpmProtPolicyId to 'zero'. If an interface would get a default value of 'zero', it is not allowed to modify the value of vRtrIfCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
Status: current Access: read-create
OBJECT-TYPE    
  TCpmProtPolicyID  

vRtrIfCpmProtUncfgdProtoDropCnt 1.3.6.1.4.1.6527.3.1.2.3.4.1.69
The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of network control protocol messages dropped due to the operation of the protocol protection facility. The protocol protection facility can be enabled and disabled by means of the object TIMETRA-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg. When the protocol protection facility is enabled, network control protocol traffic received on this virtual router interface is dropped if the protocol is not configured on this virtual router interface. The value of vRtrIfProtocol indicates which protocols are configured on this virtual router interface. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrIfLdpSyncTimer 1.3.6.1.4.1.6527.3.1.2.3.4.1.70
The value of vRtrIfLdpSyncTimer specifies a time interval used for IGP-LDP synchronization. The timer is started from the time the LDP session to the neighbor is up over the interface. This is to allow for the label FEC bindings to be exchanged. When the timer expires, the link cost is restored and is re-advertised. IGP will announce a new best next-hop and LDP will use it if the label binding for the neighbor's FEC is available.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..1800  

vRtrIfStripLabel 1.3.6.1.4.1.6527.3.1.2.3.4.1.71
The value of vRtrIfStripLabel specifies whether a packet received on the interface will have it's MPLS labels stripped from the packet (true) or not (false).
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfuRPFCheckState 1.3.6.1.4.1.6527.3.1.2.3.4.1.72
The value of vRtrIfuRPFCheckState specifies whether unicast RPF (uRPF) Check is enabled on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrIfuRPFCheckMode 1.3.6.1.4.1.6527.3.1.2.3.4.1.73
The value of vRtrIfuRPFCheckMode specifies the mode of unicast RPF check. In 'strict' mode, uRPF checks whether incoming packet has a source address that matches a prefix in the routing table, and whether the interface expects to receive a packet with this source address prefix. In 'loose' mode, uRPF checks whether incoming packet has source address with a corresponding prefix in the routing table, however 'loose' mode does not check whether the interface expects to receive a packet with a specific source address prefix. This object is valid only when value of vRtrIfuRPFCheckState is set to 'enabled'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER strict(1), loose(2)  

vRtrIfQosQGrp 1.3.6.1.4.1.6527.3.1.2.3.4.1.74
The value of vRtrIfQosQGrp specifies the name of the QoS queue-group (TIMETRA-QOS-MIB::tQosEgrQGroupName) used with this interface. An 'inconsistentValue' error is returned if this object is set to a non-default value and an entry corresponding to vRtrIfPortID does not exist in TIMETRA-PORT-MIB::tPortNetEgrQGrpTable. This object is obsoleted in release 10.0 and replaced with object vRtrIfQosEgrPortRedirectQGrp.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrIfAdminLinkLocalAddrType 1.3.6.1.4.1.6527.3.1.2.3.4.1.75
The value of vRtrIfAdminLinkLocalAddrType specifies the IP address type of the link local address of this virtual router interface.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrIfAdminLinkLocalAddr 1.3.6.1.4.1.6527.3.1.2.3.4.1.76
The value of vRtrIfAdminLinkLocalAddr specifies the link local IP address of this virtual router interface.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|20)  

vRtrIfAdmLnkLclAddrPreferred 1.3.6.1.4.1.6527.3.1.2.3.4.1.77
The value of vRtrIfAdmLnkLclAddrPreferred specifies whether vRtrIfAdminLinkLocalAddr specified for this interface should be treated as preferred.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfOperDownReason 1.3.6.1.4.1.6527.3.1.2.3.4.1.78
The value of vRtrIfOperDownReason specifies the reason why the interface is operationally down. The bit values are: 'ifAdminDown (0)' - Interface is administratively down 'svcAdminDown (1)' - Service is administratively down 'portOperDown (2)' - SAP port is operationally down 'addrOrIfNotReady (3)' - Address or Parent interface is not ready 'assocObjNotReady (4)' - Associated object is not ready 'rvplsDown (5)' - R-VPLS service is down 'operGrpDown (6)' - Associated Operational Group is down 'ifAdminDestroy (7)' - Interface is being deleted 'noIfAddress (8)' - Interface address is not configured 'noIfInfo (9)' - Interface info not present 'delayedStartEnabled (10)' - Delayed start timer is enabled on the interface 'ifProtoOperDown (11)' - Protocols on interface are operationally down 'invalidPortCfg (12)' - Port configuration is not valid 'unknown (13)' - Reason is unknown 'ipv6Misconfig (14)' - Ipv6 misconfiguration.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ifAdminDown(0), svcAdminDown(1), portOperDown(2), addrOrIfNotReady(3), assocObjNotReady(4), rvplsDown(5), operGrpDown(6), ifAdminDestroy(7), noIfAddress(8), noIfInfo(9), delayedStartEnabled(10), ifProtoOperDown(11), invalidPortCfg(12), unknown(13), ipv6Misconfig(14)  

vRtrIcmp6Table 1.3.6.1.4.1.6527.3.1.2.3.31
The vRtrIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIcmp6Entry

vRtrIcmp6Entry 1.3.6.1.4.1.6527.3.1.2.3.31.1
Each row entry represents the ICMP statistics of a virtual router instance. Entries are created and deleted when entries in the vRtrConfEntry are created and deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIcmp6Entry  

vRtrIcmp6InMsgs 1.3.6.1.4.1.6527.3.1.2.3.31.1.1
The value of vRtrIcmp6InMsgs indicates the total number of ICMP messages received by this router instance which includes all those counted by vRtrIcmp6InErrors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InErrors 1.3.6.1.4.1.6527.3.1.2.3.31.1.2
The value of vRtrIcmp6InErrors indicates the number of ICMP messages which this router instance received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InDestUnreachs 1.3.6.1.4.1.6527.3.1.2.3.31.1.3
The value of vRtrIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InAdminProhibs 1.3.6.1.4.1.6527.3.1.2.3.31.1.4
The value of vRtrIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InTimeExcds 1.3.6.1.4.1.6527.3.1.2.3.31.1.5
The value of vRtrIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InParmProblems 1.3.6.1.4.1.6527.3.1.2.3.31.1.6
The value of vRtrIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InPktTooBigs 1.3.6.1.4.1.6527.3.1.2.3.31.1.7
The value of vRtrIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InEchos 1.3.6.1.4.1.6527.3.1.2.3.31.1.8
The value of vRtrIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InEchoReplies 1.3.6.1.4.1.6527.3.1.2.3.31.1.9
The value of vRtrIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InRtrSolicits 1.3.6.1.4.1.6527.3.1.2.3.31.1.10
The value of vRtrIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InRtrAdvertisements 1.3.6.1.4.1.6527.3.1.2.3.31.1.11
The value of vRtrIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InNbrSolicits 1.3.6.1.4.1.6527.3.1.2.3.31.1.12
The value of vRtrIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InNbrAdvertisements 1.3.6.1.4.1.6527.3.1.2.3.31.1.13
The value of vRtrIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InRedirects 1.3.6.1.4.1.6527.3.1.2.3.31.1.14
The value of vRtrIcmp6InRedirects indicates number of ICMP Redirect messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InGrpMembQueries 1.3.6.1.4.1.6527.3.1.2.3.31.1.15
The value of vRtrIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InGrpMembResponses 1.3.6.1.4.1.6527.3.1.2.3.31.1.16
The value of vRtrIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6InGrpMembReductions 1.3.6.1.4.1.6527.3.1.2.3.31.1.17
The value of vRtrIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutMsgs 1.3.6.1.4.1.6527.3.1.2.3.31.1.18
The value of vRtrIcmp6OutMsgs indicates the total number of ICMP messages which this router instance attempted to send. Note that this counter includes all those counted by icmpOutErrors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutErrors 1.3.6.1.4.1.6527.3.1.2.3.31.1.19
The value of vRtrIcmp6OutErrors indicates the number of ICMP messages which this router instance did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtr IPv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutDestUnreachs 1.3.6.1.4.1.6527.3.1.2.3.31.1.20
The value of vRtrIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutAdminProhibs 1.3.6.1.4.1.6527.3.1.2.3.31.1.21
The value of vRtrIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutTimeExcds 1.3.6.1.4.1.6527.3.1.2.3.31.1.22
The value of vRtrIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutParmProblems 1.3.6.1.4.1.6527.3.1.2.3.31.1.23
The value of vRtrIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutPktTooBigs 1.3.6.1.4.1.6527.3.1.2.3.31.1.24
The value of vRtrIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutEchos 1.3.6.1.4.1.6527.3.1.2.3.31.1.25
The value of vRtrIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutEchoReplies 1.3.6.1.4.1.6527.3.1.2.3.31.1.26
The value of vRtrIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutRtrSolicits 1.3.6.1.4.1.6527.3.1.2.3.31.1.27
The value of vRtrIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutRtrAdvertisements 1.3.6.1.4.1.6527.3.1.2.3.31.1.28
The value of vRtrIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutNbrSolicits 1.3.6.1.4.1.6527.3.1.2.3.31.1.29
The value of vRtrIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutNbrAdvertisements 1.3.6.1.4.1.6527.3.1.2.3.31.1.30
The value of vRtrIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutRedirects 1.3.6.1.4.1.6527.3.1.2.3.31.1.31
The value of vRtrIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutGrpMembQueries 1.3.6.1.4.1.6527.3.1.2.3.31.1.32
The value of vRtrIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutGrpMembResponses 1.3.6.1.4.1.6527.3.1.2.3.31.1.33
The value of vRtrIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIcmp6OutGrpMembReductions 1.3.6.1.4.1.6527.3.1.2.3.31.1.34
The value of vRtrIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this router instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6Table 1.3.6.1.4.1.6527.3.1.2.3.32
The vRtrIfIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfIcmp6Entry

vRtrIfIcmp6Entry 1.3.6.1.4.1.6527.3.1.2.3.32.1
Each row entry represents the ICMP statistics of a virtual router interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfIcmp6Entry  

vRtrIfIcmp6InMsgs 1.3.6.1.4.1.6527.3.1.2.3.32.1.1
The value of vRtrIfIcmp6InMsgs indicates the total number of ICMP messages received by this interface which includes all those counted by vRtrIfIcmp6InErrors. Note that this interface is the interface to which the ICMP messages were addressed which may not be necessarily the input interface for the messages.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InErrors 1.3.6.1.4.1.6527.3.1.2.3.32.1.2
The value of vRtrIfIcmp6InErrors indicates the number of ICMP messages which this interface received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InDestUnreachs 1.3.6.1.4.1.6527.3.1.2.3.32.1.3
The value of vRtrIfIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InAdminProhibs 1.3.6.1.4.1.6527.3.1.2.3.32.1.4
The value of vRtrIfIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InTimeExcds 1.3.6.1.4.1.6527.3.1.2.3.32.1.5
The value of vRtrIfIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InParmProblems 1.3.6.1.4.1.6527.3.1.2.3.32.1.6
The value of vRtrIfIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InPktTooBigs 1.3.6.1.4.1.6527.3.1.2.3.32.1.7
The value of vRtrIfIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InEchos 1.3.6.1.4.1.6527.3.1.2.3.32.1.8
The value of vRtrIfIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InEchoReplies 1.3.6.1.4.1.6527.3.1.2.3.32.1.9
The value of vRtrIfIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InRtrSolicits 1.3.6.1.4.1.6527.3.1.2.3.32.1.10
The value of vRtrIfIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InRtrAdvertisements 1.3.6.1.4.1.6527.3.1.2.3.32.1.11
The value of vRtrIfIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InNbrSolicits 1.3.6.1.4.1.6527.3.1.2.3.32.1.12
The value of vRtrIfIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InNbrAdvertisements 1.3.6.1.4.1.6527.3.1.2.3.32.1.13
The value of vRtrIfIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InRedirects 1.3.6.1.4.1.6527.3.1.2.3.32.1.14
The value of vRtrIfIcmp6InRedirects indicates number of ICMP Redirect messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InGrpMembQueries 1.3.6.1.4.1.6527.3.1.2.3.32.1.15
The value of vRtrIfIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InGrpMembResponses 1.3.6.1.4.1.6527.3.1.2.3.32.1.16
The value of vRtrIfIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6InGrpMembReductions 1.3.6.1.4.1.6527.3.1.2.3.32.1.17
The value of vRtrIfIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutMsgs 1.3.6.1.4.1.6527.3.1.2.3.32.1.18
The value of vRtrIfIcmp6OutMsgs indicates the total number of ICMP messages which this interface attempted to send. Note that this counter includes all those counted by icmpOutErrors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutErrors 1.3.6.1.4.1.6527.3.1.2.3.32.1.19
The value of vRtrIfIcmp6OutErrors indicates the number of ICMP messages which this interface did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtr IPv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutDestUnreachs 1.3.6.1.4.1.6527.3.1.2.3.32.1.20
The value of vRtrIfIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutAdminProhibs 1.3.6.1.4.1.6527.3.1.2.3.32.1.21
The value of vRtrIfIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutTimeExcds 1.3.6.1.4.1.6527.3.1.2.3.32.1.22
The value of vRtrIfIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutParmProblems 1.3.6.1.4.1.6527.3.1.2.3.32.1.23
The value of vRtrIfIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutPktTooBigs 1.3.6.1.4.1.6527.3.1.2.3.32.1.24
The value of vRtrIfIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutEchos 1.3.6.1.4.1.6527.3.1.2.3.32.1.25
The value of vRtrIfIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutEchoReplies 1.3.6.1.4.1.6527.3.1.2.3.32.1.26
The value of vRtrIfIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutRtrSolicits 1.3.6.1.4.1.6527.3.1.2.3.32.1.27
The value of vRtrIfIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutRtrSolicitsTime 1.3.6.1.4.1.6527.3.1.2.3.32.1.28
The value of vRtrIfIcmp6OutRtrSolicitsTime indicates the system time when the last router solicitation message was sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfIcmp6OutRtrAdvertisements 1.3.6.1.4.1.6527.3.1.2.3.32.1.29
The value of vRtrIfIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutRtrAdvTime 1.3.6.1.4.1.6527.3.1.2.3.32.1.30
The value of vRtrIfIcmp6OutRtrAdvTime indicates the system time when the last router advertisement message was sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfIcmp6OutNbrSolicits 1.3.6.1.4.1.6527.3.1.2.3.32.1.31
The value of vRtrIfIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutNbrSolicitsTime 1.3.6.1.4.1.6527.3.1.2.3.32.1.32
The value of vRtrIfIcmp6OutNbrSolicitsTime indicates the system time when the last neighbor solicitation message was sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfIcmp6OutNbrAdvertisements 1.3.6.1.4.1.6527.3.1.2.3.32.1.33
The value of vRtrIfIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutNbrAdvTime 1.3.6.1.4.1.6527.3.1.2.3.32.1.34
The value of vRtrIfIcmp6OutNbrAdvTime indicates the system time when the last neighbor advertisement message was sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfIcmp6OutRedirects 1.3.6.1.4.1.6527.3.1.2.3.32.1.35
The value of vRtrIfIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutGrpMembQueries 1.3.6.1.4.1.6527.3.1.2.3.32.1.36
The value of vRtrIfIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutGrpMembResponses 1.3.6.1.4.1.6527.3.1.2.3.32.1.37
The value of vRtrIfIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIcmp6OutGrpMembReductions 1.3.6.1.4.1.6527.3.1.2.3.32.1.38
The value of vRtrIfIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdTable 1.3.6.1.4.1.6527.3.1.2.3.33
The vRtrIfBfdTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfEntry with the same indices. The vRtrIfBfdTable is obsoleted and replaced with vRtrIfBfdExtTable in 9.0 Release.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfBfdEntry

vRtrIfBfdEntry 1.3.6.1.4.1.6527.3.1.2.3.33.1
Each row entry represents the BFD configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted. The vRtrIfBfdEntry is obsoleted and replaced with vRtrIfBfdExtEntry in 9.0 Release.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VRtrIfBfdEntry  

vRtrIfBfdAdminState 1.3.6.1.4.1.6527.3.1.2.3.33.1.1
The value of vRtrIfBfdAdminState specifies the admin state of BFD on this interface. When it is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot. The vRtrIfBfdAdminState object is obsoleted and replaced with vRtrIfBfdExtAdminState object in 9.0 Release.
Status: obsolete Access: read-write
OBJECT-TYPE    
  TmnxAdminState  

vRtrIfBfdTransmitInterval 1.3.6.1.4.1.6527.3.1.2.3.33.1.2
The value of vRtrIfBfdTransmitInterval specifies the BFD transmit interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds. The vRtrIfBfdTransmitInterval object is obsoleted and replaced with vRtrIfBfdExtTransmitInterval object in 9.0 Release.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 10..100000  

vRtrIfBfdReceiveInterval 1.3.6.1.4.1.6527.3.1.2.3.33.1.3
The value of vRtrIfBfdReceiveInterval specifies the BFD receive interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds. The vRtrIfBfdReceiveInterval object is obsoleted and replaced with vRtrIfBfdExtReceiveInterval object in 9.0 Release.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 10..100000  

vRtrIfBfdMultiplier 1.3.6.1.4.1.6527.3.1.2.3.33.1.4
The value of vRtrIfBfdMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault. The vRtrIfBfdMultiplier object is obsoleted and replaced with vRtrIfBfdExtMultiplier object in 9.0 Release.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 3..20  

vRtrIfBfdEchoInterval 1.3.6.1.4.1.6527.3.1.2.3.33.1.5
The value of vRtrIfBfdEchoInterval specifies the BFD echo interval over this interface. The vRtrIfBfdEchoInterval object is obsoleted and replaced with vRtrIfBfdExtEchoInterval object in 9.0 Release.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 100..100000  

vRtrIfBfdType 1.3.6.1.4.1.6527.3.1.2.3.33.1.6
The value of vRtrIfBfdType specifies the configured termination of a BFD session on this interface. 'cpmNp(1)' specifies termination on the CPM card's Network Processor. 'auto(2)' specifies a system-selected termination other than the CPM Network Processor. The vRtrIfBfdType object is obsoleted and replaced with vRtrIfBfdExtType object in 9.0 Release.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER cpmNp(1), auto(2), iomHw(3)  

vRtrIfBfdSessionTable 1.3.6.1.4.1.6527.3.1.2.3.34
The vRtrIfBfdSessionTable table contains per BFD session statistics and operational settings.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfBfdSessionEntry

vRtrIfBfdSessionEntry 1.3.6.1.4.1.6527.3.1.2.3.34.1
Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VRtrIfBfdSessionEntry  

vRtrIfBfdSessionLclAddrType 1.3.6.1.4.1.6527.3.1.2.3.34.1.1
The value of vRtrIfBfdSessionLclAddrType indicates the address type in vRtrIfBfdSessionLclAddr.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrIfBfdSessionLclAddr 1.3.6.1.4.1.6527.3.1.2.3.34.1.2
The value of vRtrIfBfdSessionLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionLclAddrType.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

vRtrIfBfdSessionRemAddrType 1.3.6.1.4.1.6527.3.1.2.3.34.1.3
The value of vRtrIfBfdSessionRemAddrType indicates the address type in vRtrIfBfdSessionRemAddr.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrIfBfdSessionRemAddr 1.3.6.1.4.1.6527.3.1.2.3.34.1.4
The value of vRtrIfBfdSessionRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionRemAddrType.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

vRtrIfBfdSessionOperState 1.3.6.1.4.1.6527.3.1.2.3.34.1.5
The value of vRtrIfBfdSessionOperState indicates the operational state of BFD on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrIfBfdSessionState 1.3.6.1.4.1.6527.3.1.2.3.34.1.6
The value of vRtrIfBfdSessionState indicates the state of the BFD protocol on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER adminDown(0), down(1), init(2), up(3)  

vRtrIfBfdSessionOperFlags 1.3.6.1.4.1.6527.3.1.2.3.34.1.7
The value of vRtrIfBfdSessionOperFlags indicates the reasons why a BFD session is not up.
Status: obsolete Access: read-only
OBJECT-TYPE    
  BITS noProtocols(0), noHeartBeat(1), echoFailed(2), nbrSignalDown(3), fwdPlaneReset(4), pathDown(5), nbrAdminDown(6), adminClear(7)  

vRtrIfBfdSessionMesgRecv 1.3.6.1.4.1.6527.3.1.2.3.34.1.8
The value of vRtrIfBfdSessionMesgRecv indicates the number of messages received in this session. This object is applicable if vRtrIfBfdSessionType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessionMesgSent 1.3.6.1.4.1.6527.3.1.2.3.34.1.9
The value of vRtrIfBfdSessionMesgSent indicates the number of messages sent in this session. This object is applicable if vRtrIfBfdSessionType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessionLastDownTime 1.3.6.1.4.1.6527.3.1.2.3.34.1.10
The value of vRtrIfBfdSessionLastDownTime indicates the system time when this session last went down.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfBfdSessionLastUpTime 1.3.6.1.4.1.6527.3.1.2.3.34.1.11
The value of vRtrIfBfdSessionLastUpTime indicates the system time when this session last came up.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfBfdSessionUpCount 1.3.6.1.4.1.6527.3.1.2.3.34.1.12
The value of vRtrIfBfdSessionUpCount indicates the number of times vRtrIfBfdSessionOperState changed from 'outOfService' to 'inService'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessionDownCount 1.3.6.1.4.1.6527.3.1.2.3.34.1.13
The value of vRtrIfBfdSessionDownCount indicates the number of times vRtrIfBfdSessionOperState changed from 'inService' to 'outOfService'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessionLclDisc 1.3.6.1.4.1.6527.3.1.2.3.34.1.14
The value of vRtrIfBfdSessionLclDisc indicates the unique local discriminator for this session.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessionRemDisc 1.3.6.1.4.1.6527.3.1.2.3.34.1.15
The value of vRtrIfBfdSessionRemDisc indicates the remote discriminator for this session.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessionProtocols 1.3.6.1.4.1.6527.3.1.2.3.34.1.16
The value of vRtrIfBfdSessionProtocols indicates which protocols are using this BFD session.
Status: obsolete Access: read-only
OBJECT-TYPE    
  BITS ospfv2(0), pim(1), isis(2), staticRoute(3), mcRing(4), rsvp(5), bgp(6), vrrp(7), srrp(8), mcep(9), ldp(10), ipsecTunnel(11), ospfv3(12), mcIpsec(13), mcMobile(14), mplsTp(15), lag(16)  

vRtrIfBfdSessionTxInterval 1.3.6.1.4.1.6527.3.1.2.3.34.1.17
The value of vRtrIfBfdSessionTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdExtTransmitInterval' and the remote node's receive interval.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessionRxInterval 1.3.6.1.4.1.6527.3.1.2.3.34.1.18
The value of vRtrIfBfdSessionRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdExtReceiveInterval' and the remote node's transmit interval.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessionType 1.3.6.1.4.1.6527.3.1.2.3.34.1.19
The value of vRtrIfBfdSessionType indicates the termination of the BFD session, as follows: 'iom (1)' - termination on the IOM card main processor, 'cpm (2)' - termination on the CPM card main processor, 'cpmNp (3)' - termination on the CPM card Network Processor.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER iom(1), cpm(2), cpmNp(3), iomHw(4)  

vRtrIfBfdSessionVerMismatch 1.3.6.1.4.1.6527.3.1.2.3.34.1.20
The value of vRtrIfBfdSessionVerMismatch indicates the number of version mismatch errors for the bfd session.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessionTimeSinceLastRx 1.3.6.1.4.1.6527.3.1.2.3.34.1.21
The value of vRtrIfBfdSessionTimeSinceLastRx indicates the number of milliseconds elapsed since the most recent message was received on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessionType equal to 'cpmNp(3)'. Otherwise, zero is returned.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessionTimeSinceLastTx 1.3.6.1.4.1.6527.3.1.2.3.34.1.22
The value of vRtrIfBfdSessionTimeSinceLastTx indicates the number of milliseconds elapsed since the most recent message was transmitted on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessionType equal to 'cpmNp(3)'. Otherwise, zero is returned.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfProxyArpTable 1.3.6.1.4.1.6527.3.1.2.3.18
The vRtrIfProxyArpTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfProxyArpEntry

vRtrIfProxyArpEntry 1.3.6.1.4.1.6527.3.1.2.3.18.1
Each row entry represents information related to Proxy ARP for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfProxyArpEntry  

vRtrIfProxyArp 1.3.6.1.4.1.6527.3.1.2.3.18.1.1
If the value of vRtrIfProxyArp is set to 'true', proxy ARP is enabled on this interface. If this value is 'false', proxy ARP is disabled on the interface.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfProxyArpLocal 1.3.6.1.4.1.6527.3.1.2.3.18.1.2
If the value of vRtrIfProxyArpLocal is set to 'true', local proxy ARP is enabled, that is, the interface will reply to ARP requests even if both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyArpLocal is set to 'false', the interface will not reply to ARP requests if both the hosts are on the same subnet.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfProxyArpPolicy1 1.3.6.1.4.1.6527.3.1.2.3.18.1.3
The value of vRtrIfProxyArpPolicy1 is used to specify the first proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy1 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfProxyArpPolicy2 1.3.6.1.4.1.6527.3.1.2.3.18.1.4
The value of vRtrIfProxyArpPolicy2 is used to specify the second proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy2 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfProxyArpPolicy3 1.3.6.1.4.1.6527.3.1.2.3.18.1.5
The value of vRtrIfProxyArpPolicy3 is used to specify the third proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy3 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfProxyArpPolicy4 1.3.6.1.4.1.6527.3.1.2.3.18.1.6
The value of vRtrIfProxyArpPolicy4 is used to specify the fourth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy4 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfProxyArpPolicy5 1.3.6.1.4.1.6527.3.1.2.3.18.1.7
The value of vRtrIfProxyArpPolicy5 is used to specify the fifth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy5 has no effect if vRtrIfProxyArp is set to 'false'.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfDHCPTable 1.3.6.1.4.1.6527.3.1.2.3.19
The vRtrIfDHCPTable is used to configure the interface parameters for the DHCP Relay agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfDHCPEntry

vRtrIfDHCPEntry 1.3.6.1.4.1.6527.3.1.2.3.19.1
Each row entry represents information related to DHCP Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfDHCPEntry  

vRtrIfDHCPRelayInfoOption 1.3.6.1.4.1.6527.3.1.2.3.19.1.1
vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If the value of this object is set to 'false', DHCP Relay is disabled.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfDHCPRelayInfoAction 1.3.6.1.4.1.6527.3.1.2.3.19.1.2
vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay reforwarding policy. replace(1) - replace existing information with DHCP relay information drop(2) - discard messages with existing relay information if the option-82 information is also present. keep(3) - retain the existing relay information.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)  

vRtrIfDHCPRelayCircuitId 1.3.6.1.4.1.6527.3.1.2.3.19.1.3
The value of the object vRtrIfDHCPRelayCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it. If the value of this object is set to 'none', the circuit-id suboption will not be part of the information option (option 82). If the value of this object is set to 'ifIndex', the value of the interface index is used. If the value of this object is set to 'asciiTuple', the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') is used. If the value of this object is set to 'sapId', the ASCII-encoded SAP-id is used. If the value of this object is set to 'vlan-ascii-tuple' - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet. -- -- The value 'sapId(3)' can only be used if the interface is a service -- interface. -- The values 'portId(5)' and 'ifName(6)' can only be used if the -- interface is a network interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), ifIndex(1), asciiTuple(2), sapId(3), vlanAsciiTuple(4)  

vRtrIfDHCPRelayRemoteId 1.3.6.1.4.1.6527.3.1.2.3.19.1.4
The value of vRtrIfDHCPRelayRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption is left blank. If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of the object is set to 'remote-id', vRtrIfDHCPRelayRemoteIdStr will be the remote-id.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER mac(1), none(2), remote-id(3)  

vRtrIfDHCPAutoFilter 1.3.6.1.4.1.6527.3.1.2.3.19.1.5
vRtrIfDHCPAutoFilter allows the router to automatically build anti-spoofing filter lists. When this object is set to a non-zero value, auto-filtering is enabled and a filter allowing only PPPoE or DHCP traffic is established on the interface. The non-zero value indicates the maximum number of entries that the auto-filter can have. These entries are created by the agent upon snooping a valid DHCP Reply packet and are used to allow traffic sourced by the given DHCP-assigned IP address.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Unsigned32 0..2000  

vRtrIfDHCPRelayServer1 1.3.6.1.4.1.6527.3.1.2.3.19.1.6
vRtrIfDHCPRelayServer1 is used to configure the first DHCP server where the requests will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPRelayServer2 1.3.6.1.4.1.6527.3.1.2.3.19.1.7
vRtrIfDHCPRelayServer2 is used to configure the second DHCP server where the requests will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPRelayServer3 1.3.6.1.4.1.6527.3.1.2.3.19.1.8
vRtrIfDHCPRelayServer3 is used to configure the third DHCP server where the requests will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPRelayServer4 1.3.6.1.4.1.6527.3.1.2.3.19.1.9
vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server where the requests will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPRelayServer5 1.3.6.1.4.1.6527.3.1.2.3.19.1.10
vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server where the requests will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPRelayServer6 1.3.6.1.4.1.6527.3.1.2.3.19.1.11
vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server where the requests will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPRelayServer7 1.3.6.1.4.1.6527.3.1.2.3.19.1.12
vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server where the requests will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPRelayServer8 1.3.6.1.4.1.6527.3.1.2.3.19.1.13
vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server where the requests will be forwarded.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPRelayTrusted 1.3.6.1.4.1.6527.3.1.2.3.19.1.14
When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the router will relay requests where the DHCP giaddr is zero.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfDHCPAdminState 1.3.6.1.4.1.6527.3.1.2.3.19.1.15
vRtrIfDHCPAdminState is used to configure the desired administrative state of DHCP on this interface. If the value of vRtrIfType is network this object can only be set to 'outOfService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrIfDHCPSnooping 1.3.6.1.4.1.6527.3.1.2.3.19.1.16
vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets received on interface.
Status: obsolete Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vRtrIfDHCPDescription 1.3.6.1.4.1.6527.3.1.2.3.19.1.17
The value of vRtrIfDHCPDescription is a user provided description string for DHCP on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

vRtrIfDHCPAutoFilterId 1.3.6.1.4.1.6527.3.1.2.3.19.1.18
vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used for this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TFilterID  

vRtrIfDHCPOperAutoFilter 1.3.6.1.4.1.6527.3.1.2.3.19.1.19
The value of vRtrIfDHCPOperAutoFilter indicates the number of active auto-filter entries per interface. These entries are created in the TIMETRA-FILTER-MIB::tIPFilterTable by the agent by snooping valid 'DHCP ACK' messages.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2000  

vRtrIfDHCPAuthPolicy 1.3.6.1.4.1.6527.3.1.2.3.19.1.20
Defines which subscriber authentication policy must be applied when a subscriber message (e.g. DHCP, PPPoE, ...) is received on the interface. The authentication policy must be defined in tmnxSubAuthPlcyTable.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfDHCPLeasePopulate 1.3.6.1.4.1.6527.3.1.2.3.19.1.21
The value of the object vRtrIfDHCPLeasePopulate specifies the maximum number of DHCP lease states allowed on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..32767  

vRtrIfDHCPOperLeasePopulate 1.3.6.1.4.1.6527.3.1.2.3.19.1.22
The value of the object vRtrIfDHCPOperLeasePopulate indicates the maximum number of DHCP lease states allocated on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..32767  

vRtrIfDHCPGiAddressType 1.3.6.1.4.1.6527.3.1.2.3.19.1.23
The value of vRtrIfDHCPGiAddressType specifies the type of vRtrIfDHCPGiAddress, the gateway interface address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrIfDHCPGiAddress 1.3.6.1.4.1.6527.3.1.2.3.19.1.24
The value of vRtrIfDHCPGiAddress specifies the gateway interface address. The type of this address is specified by the value of vRtrIfDHCPGiAddressType.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4)  

vRtrIfDHCPGiAddressAsSrc 1.3.6.1.4.1.6527.3.1.2.3.19.1.25
The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay should use the gateway interface address as the source IP address when communicating with the DHCP server. When it is set to 'true(1)', the source IP address used to communicate with the DHCP server is the gateway interface address. When it is 'false', the source IP is the IP of the egress interface the IP packet goes out on.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfDHCPMatchOption82 1.3.6.1.4.1.6527.3.1.2.3.19.1.26
The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay should use the circuit ID in the option 82 field in DHCP packets to match DHCP messages. When it is set to 'true(1)', the option 82 circuit ID is used in addition to the MAC address and transaction ID. When it is set to 'false', only the MAC address and transaction ID are used.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfDHCPRelayRemoteIdStr 1.3.6.1.4.1.6527.3.1.2.3.19.1.27
The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set to 'remote-id'.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

vRtrIfDHCPProxyAdminState 1.3.6.1.4.1.6527.3.1.2.3.19.1.28
The value of vRtrIfDHCPProxyAdminState specifies the desired administrative state of the proxy server on this interface. When it is set to 'inService', the proxy server is enabled only if vRtrIfDHCPAdminState is also set to 'inService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrIfDHCPProxyServerAddr 1.3.6.1.4.1.6527.3.1.2.3.19.1.29
The value of vRtrIfDHCPProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server. If this IP address is not configured, the value of vRiaIpAddress will be used as the source address of the emulated DHCP server.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPProxyLeaseTime 1.3.6.1.4.1.6527.3.1.2.3.19.1.30
The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 300..315446399  

vRtrIfDHCPProxyLTRadiusOverride 1.3.6.1.4.1.6527.3.1.2.3.19.1.31
The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of vRtrIfDHCPProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When vRtrIfDHCPProxyLTRadiusOverride is set to 'true(1)', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfDHCPVendorIncludeOptions 1.3.6.1.4.1.6527.3.1.2.3.19.1.32
The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded in the Alcatel-Lucent vendor specific sub-option of option 82. -- The values 'serviceId(2)' and 'sapId(3)' can only be used if the -- interface is a service interface. -- The values 'portId(5)' and 'ifName(6)' can only be used if the -- interface is a network interface. -- The value of this object is only used when vRtrIfDHCPRelayInfoAction is 'replace(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  BITS systemId(0), clientMac(1), serviceId(2), sapId(3), poolName(4)  

vRtrIfDHCPVendorOptionString 1.3.6.1.4.1.6527.3.1.2.3.19.1.33
The value of vRtrIfDHCPVendorOptionString specifies the string that goes into the Alcatel-Lucent vendor specific sub-option of option 82. This string is only used when vRtrIfDHCPRelayInfoAction is set to 'replace(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

vRtrIfDHCPLayer2Header 1.3.6.1.4.1.6527.3.1.2.3.19.1.34
The value of vRtrIfDHCPLayer2Header specificies, together with the value of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address that is used in anti-spoof entries for the lease states on this interface. When it is set to 'false (2)', the client hardware address from the DHCP payload, stored in TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When it is set to 'true (1)', the behavior depends on the value of vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to all zeros, the source MAC address in the L2 header of the DHCP packet is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value is used. Only if the corresponding row in the vRtrIfTable has the value of the object vRtrIfType equal to 'serviceIesGroup', it is allowed to set the value of vRtrIfDHCPLayer2Header to 'true'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfDHCPAntiSpoofMacAddr 1.3.6.1.4.1.6527.3.1.2.3.19.1.35
The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the value of object vRtrIfDHCPLayer2Header, the MAC address that is used in anti-spoof entries for the lease states on this interface. When vRtrIfDHCPLayer2Header is 'false (2)', the client hardware address from the DHCP payload, stored in TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is all zeros, the source MAC address in the L2 header of the DHCP packet is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is not all zeros, then this value is used. This object can only be configured if the value of object vRtrIfDHCPLayer2Header is set to 'true (1)'.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

vRtrIfDHCPClientApplications 3.1.3.6.1.4.1.6527.3.1.2.3.19.1.36
The value of vRtrIfDHCPClientApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  BITS dhcp(0), ppp(1)  

vRtrIfDHCPRelayPlainBootp 1.3.6.1.4.1.6527.3.1.2.3.19.1.37
The value of vRtrIfDHCPRelayPlainBootp specifies whether plain bootp messages will be relayed. If set to 'disabled', the system will consider plain bootp packets as malformed DHCP packets and hence will not relay these messages.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vRtrIfDHCPUserDb 1.3.6.1.4.1.6527.3.1.2.3.19.1.38
The value of vRtrIfDHCPUserDb specifies the local user database to authenticate against. If no authentication with the local user database is required, the value of this object must be set to the empty string.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrIfDHCPUseArpForReply 1.3.6.1.4.1.6527.3.1.2.3.19.1.39
The value of vRtrIfDHCPUseArpForReply specifies, how the system determines the Hw address for outgoing IP packets. If set to 'false', the DHCP CHADDR (Client Hardware Address) is used. If set to 'true' the CHADDR is ignored, and ARP is used to determine the Hw address. Is set to TRUE, the system will accept all DHCP messages with CHADDR set to 00:00:00:00:00:00. This option only has effect on ethernet interfaces.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfDHCPFilterId 1.3.6.1.4.1.6527.3.1.2.3.19.1.40
The value of vRtrIfDHCPFilterId specifies the DHCP filter to apply. If no filtering is required, the value of this object must be set to 0.
Status: current Access: read-create
OBJECT-TYPE    
  TDHCPFilterID  

vRtrIfDHCPRelayStatsTable 1.3.6.1.4.1.6527.3.1.2.3.20
The vRtrIfDHCPRelayStatsTable contains the statistics for the DHCP Relay agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfDHCPRelayStatsEntry

vRtrIfDHCPRelayStatsEntry 1.3.6.1.4.1.6527.3.1.2.3.20.1
Each row entry represents information related to DHCP Relay statistics for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfDHCPRelayStatsEntry  

vRtrIfDHCPRelayRxPkts 1.3.6.1.4.1.6527.3.1.2.3.20.1.1
vRtrIfDHCPRelayRxPkts indicates the total number of packets received by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayTxPkts 1.3.6.1.4.1.6527.3.1.2.3.20.1.2
vRtrIfDHCPRelayTxPkts indicates the total number of packets transmitted by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayRxMalformedPkts 1.3.6.1.4.1.6527.3.1.2.3.20.1.3
vRtrIfDHCPRelayRxMalformedPkts indicates the total number of malformed packets received by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayRxUntrustedPkts 1.3.6.1.4.1.6527.3.1.2.3.20.1.4
vRtrIfDHCPRelayRxUntrustedPkts indicates the total number of untrusted packets received by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayClientPktsDiscarded 1.3.6.1.4.1.6527.3.1.2.3.20.1.5
vRtrIfDHCPRelayClientPktsDiscarded indicates the total number of client packets dicarded by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayClientPktsRelayed 1.3.6.1.4.1.6527.3.1.2.3.20.1.6
vRtrIfDHCPRelayClientPktsRelayed indicates the total number of client packets relayed by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayServerPktsDiscarded 1.3.6.1.4.1.6527.3.1.2.3.20.1.7
vRtrIfDHCPRelayServerPktsDiscarded indicates the total number of server packets discarded by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayServerPktsRelayed 1.3.6.1.4.1.6527.3.1.2.3.20.1.8
vRtrIfDHCPRelayServerPktsRelayed indicates the total number of server packets relayed by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayAuthPktsDiscarded 1.3.6.1.4.1.6527.3.1.2.3.20.1.9
vRtrIfDHCPRelayAuthPktsDiscarded indicates the total number of packets discarded because authentication was not successful.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayAuthPktsSuccess 1.3.6.1.4.1.6527.3.1.2.3.20.1.10
vRtrIfDHCPRelayAuthPktsSuccess indicates the total number of packets for which authentication was successful.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayClientPktsSnooped 1.3.6.1.4.1.6527.3.1.2.3.20.1.11
vRtrIfDHCPRelayClientPktsSnooped indicates the total number of client packets snooped by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayServerPktsSnooped 1.3.6.1.4.1.6527.3.1.2.3.20.1.12
vRtrIfDHCPRelayServerPktsSnooped indicates the total number of server packets snooped by the DHCP relay agent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayClientPktsProxRad 1.3.6.1.4.1.6527.3.1.2.3.20.1.13
vRtrIfDHCPRelayClientPktsProxRad indicates the total number of client packets proxied by the DHCP relay agent based on data received from a RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayClientPktsProxLS 1.3.6.1.4.1.6527.3.1.2.3.20.1.14
vRtrIfDHCPRelayClientPktsProxLS indicates the total number of client packets proxied by the DHCP relay agent based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayPktsGenRelease 1.3.6.1.4.1.6527.3.1.2.3.20.1.15
vRtrIfDHCPRelayPktsGenRelease indicates the total number of DHCP RELEASE messages spoofed by the DHCP relay agent to the DHCP server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPRelayPktsGenForceRenew 1.3.6.1.4.1.6527.3.1.2.3.20.1.16
vRtrIfDHCPRelayPktsGenForceRenew indicates the total number of DHCP FORCERENEW messages spoofed by the DHCP relay agent to the DHCP clients.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfDHCPLeaseStateTable 1.3.6.1.4.1.6527.3.1.2.3.22
vRtrIfDHCPLeaseStateTable contains DHCP lease state info for a virtual router interface in the system. The content of this table is moved to the TIMETRA-SERV-MIB::svcDhcpLeaseStateTable.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfDHCPLeaseStateEntry

vRtrIfDHCPLeaseStateEntry 1.3.6.1.4.1.6527.3.1.2.3.22.1
DHCP lease state information for a virtual router interface.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VRtrIfDHCPLeaseStateEntry  

vRtrIfDHCPLseStateCiAddr 1.3.6.1.4.1.6527.3.1.2.3.22.1.1
The value of the object vRtrIfDHCPLseStateCiAddr indicates the IP address of the DHCP lease state.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vRtrIfDHCPLseStateChAddr 1.3.6.1.4.1.6527.3.1.2.3.22.1.2
The value of the object vRtrIfDHCPLseStateChAddr indicates the MAC address of the DHCP lease state.
Status: obsolete Access: read-only
OBJECT-TYPE    
  MacAddress  

vRtrIfDHCPLseStateRemainLseTime 1.3.6.1.4.1.6527.3.1.2.3.22.1.3
The value of the object vRtrIfDHCPLseStateRemainLseTime indicates the remaining lease time of the IP address of the DHCP lease state.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfDHCPLseStateOption82 1.3.6.1.4.1.6527.3.1.2.3.22.1.4
vRtrIfDHCPLseStateOption82 indicates the content of the Option82 for this DHCP lease state.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vRtrIfDHCPLseStatePersistKey 1.3.6.1.4.1.6527.3.1.2.3.22.1.5
The value of the object vRtrIfDHCPLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfDHCP6TableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.35
The value of the object vRtrIfDHCP6TableLastChanged indicates the time of the last change to any row of vRtrIfDHCP6Table
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfDHCP6Table 1.3.6.1.4.1.6527.3.1.2.3.36
The vRtrIfDHCP6Table is used to configure the interface parameters for DHCP6.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfDHCP6Entry

vRtrIfDHCP6Entry 1.3.6.1.4.1.6527.3.1.2.3.36.1
Each row entry represents information related to DHCP6 for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfDHCP6Entry  

vRtrIfDHCP6LastChanged 1.3.6.1.4.1.6527.3.1.2.3.36.1.1
The value of the object vRtrIfDHCP6LastChanged indicates the time of the last change to this row of VRtrIfDHCP6Entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfDHCP6AdminState 1.3.6.1.4.1.6527.3.1.2.3.36.1.2
The value of the object vRtrIfDHCP6AdminState specifies the desired administrative status of the DHCP6 relay agent on this interface. The value can only be set to inService if the value of vRtrIfType is serviceIesGroup. The value noop(3) is never allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrIfDHCP6OperState 1.3.6.1.4.1.6527.3.1.2.3.36.1.3
The value of the object vRtrIfDHCP6OperState indicates the current operational state of the DHCP6 relay agent on this interface. Following value are possible: up (1) - the DHCP6 relay agent is running. down (2), - the DHCP6 relay agent is administratively disabled. noIPv6Pfx (3), - the DHCP6 relay agent cannot be operational as no ipv6 prefix is assigned to this link. noServerConfigured(4) - the DHCP6 relay agent cannot be operational as no DHCP6 servers are configured. noValidSourceAddr(5) - the DHCP6 relay agent cannot be operational because a source address has been configured and the address is not local to this node.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), noIPv6Pfx(3), noServerConfigured(4), noValidSourceAddr(5)  

vRtrIfDHCP6Description 1.3.6.1.4.1.6527.3.1.2.3.36.1.4
The value of the object vRtrIfDHCP6Description specifies a user provided description string for DHCP6 relay agent on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

vRtrIfDHCP6RelayServer1 1.3.6.1.4.1.6527.3.1.2.3.36.1.5
The value of the object vRtrIfDHCP6RelayServer1 specifies the first DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6z  

vRtrIfDHCP6RelayServer2 1.3.6.1.4.1.6527.3.1.2.3.36.1.6
The value of the object vRtrIfDHCP6RelayServer2 specifies the 2nd DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6z  

vRtrIfDHCP6RelayServer3 1.3.6.1.4.1.6527.3.1.2.3.36.1.7
The value of the object vRtrIfDHCP6RelayServer3 specifies the 3rd DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6z  

vRtrIfDHCP6RelayServer4 1.3.6.1.4.1.6527.3.1.2.3.36.1.8
The value of the object vRtrIfDHCP6RelayServer4 specifies the 4rd DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6z  

vRtrIfDHCP6RelayServer5 1.3.6.1.4.1.6527.3.1.2.3.36.1.9
The value of the object vRtrIfDHCP6RelayServer5 specifies the 5th DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6z  

vRtrIfDHCP6RelayServer6 1.3.6.1.4.1.6527.3.1.2.3.36.1.10
The value of the object vRtrIfDHCP6RelayServer6 specifies the 6th DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6z  

vRtrIfDHCP6RelayServer7 1.3.6.1.4.1.6527.3.1.2.3.36.1.11
The value of the object vRtrIfDHCP6RelayServer7 specifies the 7th DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6z  

vRtrIfDHCP6RelayServer8 1.3.6.1.4.1.6527.3.1.2.3.36.1.12
The value of the object vRtrIfDHCP6RelayServer8 specifies the 8th DHCP6 server where the DHCP6 requests will be forwarded to.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6z  

vRtrIfDHCP6RelayItfIdOption 1.3.6.1.4.1.6527.3.1.2.3.36.1.13
The value of the object vRtrIfDHCP6RelayItfIdOption specifies whether or not the interface-id option is added by the DHCP6 relay agent, and, if it is present, what information goes in it. If the value of this object is set to 'none', the option is not added by the relay agent. In all other cases the option is added to the relay message. The content of the option is defined as follows: - 'ifIndex' - the value of the interface index is used. - 'asciiTuple' - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') - 'sapId' - the ASCII-encoded SAP-id is used. - 'string' - the value of the object vRtrIfDHCP6ItfIdString is used. If the value of vRtrIfType, associated with this interface, has a value of 'serviceIesGroup(7)' or 'serviceVprnGroup(9)', the value of the object vRtrIfDHCP6RelayItfIdOption may also be included in the RADIUS authentication request sent by the DHCPv6 proxy server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), ifIndex(1), asciiTuple(2), sapId(3), string(4)  

vRtrIfDHCP6LeasePopulate 1.3.6.1.4.1.6527.3.1.2.3.36.1.14
The value of the object vRtrIfDHCP6LeasePopulate specifies the maximum number of lease states allocated by the DHCP6 relay function, allowed on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..8000  

vRtrIfDHCP6CurrLeasePopulate 1.3.6.1.4.1.6527.3.1.2.3.36.1.15
The value of the object vRtrIfDHCP6CurrLeasePopulate indicates the number of lease states currently allocated on this interface by the DHCP6 relay function.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8000  

vRtrIfDHCP6SourceAddress 1.3.6.1.4.1.6527.3.1.2.3.36.1.16
The value of the object vRtrIfDHCP6SourceAddress specifies the IPv6 address that will be used by the DHCP6 relay agent as source IP address in all messages sent to the DHCP6 servers. If set to ::, the system will use the IPv6 address assigned on the link on which the relay message is sent out, if such an address is defined. As a last resort the system IPv6 address is taken.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6  

vRtrIfDHCP6EnableNgbrResolution 1.3.6.1.4.1.6527.3.1.2.3.36.1.17
The value of the object vRtrIfDHCP6EnableNgbrResolution specifies whether or not neighbor resolution via DHCP6 Relay must be enabled on this interface. This feature is similar to the arp-populate feature in ipv4.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfDHCP6RemoteIdOption 1.3.6.1.4.1.6527.3.1.2.3.36.1.18
The value of the object vRtrIfDHCP6RemoteIdOption specifies whether or not the remote Id option is sent to the DHCP6 server. The client DUID is used as remoteId. If the value of vRtrIfType, associated with this interface, has a value of 'serviceIesGroup(7)' or 'serviceVprnGroup(9)', the value of the object vRtrIfDHCP6RemoteIdOption may also be included in the RADIUS authentication request sent by the DHCPv6 proxy server.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfDHCP6PfxdAdminState 1.3.6.1.4.1.6527.3.1.2.3.36.1.19
The value of the object vRtrIfDHCP6PfxdAdminState specifies the administrative state of the row. If set to enabled, this IPv6 prefix will be delegated by the system.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vRtrIfDHCP6ServerMaxLeaseStates 1.3.6.1.4.1.6527.3.1.2.3.36.1.20
The value of the object vRtrIfDHCP6ServerMaxLeaseStates specifies the maximum number of lease states installed by the DHCP6 server function allowed on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..8000  

vRtrIfDHCP6CurrServerLeaseStates 1.3.6.1.4.1.6527.3.1.2.3.36.1.21
The value of the object vRtrIfDHCP6CurrServerLeaseStates indicates the number of lease states currently allocated on this interface by the DHCP6 server function.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..8000  

vRtrIfDHCP6ItfIdString 1.3.6.1.4.1.6527.3.1.2.3.36.1.22
The value of the object vRtrIfDHCP6ItfIdString specifies the string that will be put in the interface-id option added by the relay agent. This value is only meaningful if the object vRtrIfDHCP6RelayItfIdOption is set to string(4).
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..80)  

vRtrIfDHCP6ProxyAdminState 1.3.6.1.4.1.6527.3.1.2.3.36.1.23
The value of vRtrIfDHCP6ProxyAdminState specifies the desired administrative state of the IPv6 Router Advertisements.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrIfDHCP6ProxyRenewTimer 1.3.6.1.4.1.6527.3.1.2.3.36.1.24
The value of vRtrIfDHCP6ProxyRenewTimer specifies the renew-timer (T1). The time at which the client contacts the server from which the addresses in the IA_NA or IA_PD were obtained to extend the lifetimes of the addresses or prefixes assigned to the client.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..604800  

vRtrIfDHCP6ProxyRebindTimer 1.3.6.1.4.1.6527.3.1.2.3.36.1.25
The value of vRtrIfDHCP6ProxyRebindTimer specifies the rebind-timer (T2). The time at which the client contacts any available server to extend the lifetimes of the addresses or prefixes assigned to the client.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..1209600  

vRtrIfDHCP6ProxyValidLifetime 1.3.6.1.4.1.6527.3.1.2.3.36.1.26
The value of vRtrIfDHCP6ProxyValidLifetime specifies the valid lifetime for the IPv6 prefix or address in the option. A value of 0xFFFFFFFF represents infinity.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 300..4294967295  

vRtrIfDHCP6ProxyPrefLifetime 1.3.6.1.4.1.6527.3.1.2.3.36.1.27
The value of vRtrIfDHCP6ProxyPrefLifetime specifies the preferred lifetime for the IPv6 prefix or address in the option. When preferred lifetime expires, then any derived addresses are deprecated. A value of 0xFFFFFFFF represents infinity.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 300..4294967295  

vRtrIfDHCP6ProxyApplications 3.1.3.6.1.4.1.6527.3.1.2.3.36.1.28
The value of vRtrIfDHCP6ProxyApplications specifies the set of client applications that can make use of the DHCP proxy functionality on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  BITS dhcp(0), ppp(1)  

vRtrIfDHCP6UserDb 1.3.6.1.4.1.6527.3.1.2.3.36.1.29
The value of vRtrIfDHCP6UserDb specifies the local user database to authenticate against. If no authentication with the local user database is required, the value of this object must be set to the empty string.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrIfDHCP6LocalDhcpServerName 1.3.6.1.4.1.6527.3.1.2.3.36.1.30
The value of vRtrIfDHCP6LocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrIfDHCP6RelayApplications 3.1.3.6.1.4.1.6527.3.1.2.3.36.1.31
The value of vRtrIfDHCP6RelayApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface. This object can only be set when the value of vRtrIfType, associated with this interface, has a value of 'serviceIesGroup(7)' or 'serviceVprnGroup(9)'.
Status: current Access: read-create
OBJECT-TYPE    
  BITS dhcp(0), ppp(1)  

vRtrIfDHCP6LinkAddress 1.3.6.1.4.1.6527.3.1.2.3.36.1.32
The value of the object vRtrIfDHCP6LinkAddress specifies the ipv6 address that will be used by the DHCP6 relay agent as link address in all messages sent to the DHCP6 servers. If set to ::, the system determines the link address based on the group interface configuration. This object can only be set when vRtrIfType is either 'serviceIesGroup(7)' or 'serviceVprnGroup(9)'.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6  

vRtrIfNameTable 1.3.6.1.4.1.6527.3.1.2.3.5
This is a read-only table, each row of which represents a one to one equivalence between a router interface name (vRtrIfName) and its corresponding index in the vRtrIfTable (vRtrIfIndex).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfNameEntry

vRtrIfNameEntry 1.3.6.1.4.1.6527.3.1.2.3.5.1
Each row entry in the vRtrIfNameTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfNameEntry  

vRtrIfNameIndex 1.3.6.1.4.1.6527.3.1.2.3.5.1.1
The value of vRtrIfNameIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface which has interface name as vRtrIfName. Every vRtrIfName is unique within a specific instance of vRtrID.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrIpAddrTable 1.3.6.1.4.1.6527.3.1.2.3.6
The vRtrIpAddrTable has an entry for each IP address configured for a virtual router in the system. An interface on the virtual router may have more than one IP address assigned to it.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIpAddrEntry

vRtrIpAddrEntry 1.3.6.1.4.1.6527.3.1.2.3.6.1
Each row entry represents an IP address assigned a virtual router interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires a values for all column variables to have been assigned.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIpAddrEntry  

vRiaIndex 1.3.6.1.4.1.6527.3.1.2.3.6.1.1
The unique value which identifies this IP address entry for this interface of this virtual router in the Tmnx system. Those row entries with vRiaIndex = 1 represent the primary IP address for the interface identified by the vRtrID and vRtrIfIndex pair. Row entries with other values for vRiaIndex are secondary IP addresses. There must always be a primary IP address assigned an interface. This implies that if the primary address row is deleted, the secondary rows are also deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..256  

vRiaRowStatus 1.3.6.1.4.1.6527.3.1.2.3.6.1.2
The row status used for creation, deletion, or control of vRtrIpAddrTable entries. All the other row variables must have been assigned values before the row can be place into the 'active' state.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRiaIpAddress 1.3.6.1.4.1.6527.3.1.2.3.6.1.3
The IP address assigned to a router's interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRiaNetMask 1.3.6.1.4.1.6527.3.1.2.3.6.1.4
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRiaBcastAddrFormat 1.3.6.1.4.1.6527.3.1.2.3.6.1.5
When vRiaBcastAddrFormat is set to 'allOnes', the 255.255.255.255 address is used for local broadcast. When vRiaBcastAddrFormat is set to 'hostOnes', the -1 address is used for the local broadcast. For example for subnet 10.10.16.0/20 the -1 address is 10.10.31.255.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER allOnes(1), hostOnes(2)  

vRiaReasmMaxSize 1.3.6.1.4.1.6527.3.1.2.3.6.1.6
The size of the largest IP datagram which this entry can reassemble from incoming IP fragmented datagrams received on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

vRiaIgpInhibit 1.3.6.1.4.1.6527.3.1.2.3.6.1.7
This variable should only be associated with secondary ip addresses, i.e., when the value of vRiaIndex is other than 1. When vRiaIgpInhibit has a value of 'true', it indicates that the given secondary IP address should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the given secondary IP addresses will not be injected as passive interfaces and will not be advertised as internal IP interfaces into the IGP's link state database. For RIP this means these secondary IP interfaces will not source RIP updates.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRiaInetAddressType 1.3.6.1.4.1.6527.3.1.2.3.6.1.8
vRiaInetAddressType specifies the type of the vRiaInetAddress address assigned to a router's interface.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRiaInetAddress 1.3.6.1.4.1.6527.3.1.2.3.6.1.9
The type of this address is determined by the value of the vRiaInetAddressType object. vRiaInetAddress indicates the IPv4/IPv6 address assigned to a router's interface.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRiaInetPrefixLen 1.3.6.1.4.1.6527.3.1.2.3.6.1.10
The value of vRiaInetPrefixLen specifies the length of the IP netmask for this interface address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength  

vRiaInetAddrState 1.3.6.1.4.1.6527.3.1.2.3.6.1.11
The value of vRiaInetAddrState indicates the address state of the IPv6 address of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetAddrState  

vRiaInetEui64 1.3.6.1.4.1.6527.3.1.2.3.6.1.12
The value of vRiaInetEui64 specifies whether the vRiaInetOperAddress is an eui64 address. This object can only be set at creation time. When vRiaInetEui64 is 'true', then the vRiaInetOperAddress is derived from the vRiaInetAddress and the physical address of the interface this address is attached to. vRiaInetAddress has to have all zeros the least significant 8 bytes. Also, vRiaInetPrefixLen cannot be longer than 64. When vRiaInetEui64 is 'false', then the vRiaInetOperAddress is a copy of vRiaInetAddress. The value is always 'false' when vRiaInetAddressType is not 'ipv6'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRiaInetOperAddress 1.3.6.1.4.1.6527.3.1.2.3.6.1.13
The value of vRiaInetOperAddress indicates the operational address of this entry. The type of this address is determined by the value of the vRiaInetAddressType object.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

vRiaInetGwAddressType 1.3.6.1.4.1.6527.3.1.2.3.6.1.14
The value of vRiaInetGwAddressType specifies the address type of vRiaInetGwAddress.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRiaInetGwAddress 1.3.6.1.4.1.6527.3.1.2.3.6.1.15
The value of vRiaInetGwAddress specifies the gateway address for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen. The address type is defined by vRiaInetGwAddressType. This field is only valid when the address is configured on a subscriber interface.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRiaInetRemoteIpType 1.3.6.1.4.1.6527.3.1.2.3.6.1.16
The value of vRiaInetRemoteIpType specifies the address type of vRiaInetRemoteIp.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRiaInetRemoteIp 1.3.6.1.4.1.6527.3.1.2.3.6.1.17
The value of vRiaInetRemoteIp specifies the IP address of the remote redundant interface. This field is only valid when the address is configured on a redundant interface.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRiaInetAddrPreferred 1.3.6.1.4.1.6527.3.1.2.3.6.1.18
The value of vRiaInetAddrPreferred specifies whether vRiaInetAddress specified for this interface should be treated as preferred.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRiaSubscrPrefix 1.3.6.1.4.1.6527.3.1.2.3.6.1.19
The value of vRiaSubscrPrefix specifies whether the vRiaIpAddress specified for this interface should be treated as a subscriber prefix. This object cannot be modified once the row is created.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRiaSubscrPrefixType 0.1.3.6.1.4.1.6527.3.1.2.3.6.1.20
The value of vRiaSubscrPrefixType indicates the type of subscriber prefix contained in vRiaIpAddress if vRiaSubscrPrefix is TRUE. This object cannot be modified once the row is created.
Status: current Access: read-create
OBJECT-TYPE    
  BITS pd(0), wan-host(1)  

vRiaSubscrHostRoutePopulate 1.3.6.1.4.1.6527.3.1.2.3.6.1.21
The value of vRiaSubscrHostRoutePopulate specifies if subscriber host routes are populated in the FIB (Forwarding Information Base). This object can only be set to 'true' if the address is configured on a subscriber interface.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRiaTrackSrrpInstance 1.3.6.1.4.1.6527.3.1.2.3.6.1.22
The value of vRiaTrackSrrpInstance specifies the SRRP instance whose state is tracked on this ipaddress.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

vRiaHoldUpTime 1.3.6.1.4.1.6527.3.1.2.3.6.1.23
The value of vRiaHoldUpTime specifies the time to wait for the route to accept new state of the SRRP instance which is being tracked with this address. An 'inconsistentValue' error is returned if vRiaHoldUpTime is set to non-default value when vRiaTrackSrrpInstance is set to its default value.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 100..5000  

vRtrIpCidrRouteTable 1.3.6.1.4.1.6527.3.1.2.3.7
The vRtrIpCidrRouteTable provides an extension of the ipCidrRouteTable in the IP-FORWARD-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIpCidrRouteEntry

vRtrIpCidrRouteEntry 1.3.6.1.4.1.6527.3.1.2.3.7.1
Each row entry in the vRtrIpCidrRouteTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the IP route table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIpCidrRouteEntry  

vRtrIpCidrRouteLastEnabledTime 1.3.6.1.4.1.6527.3.1.2.3.7.1.1
The vRtrIpCidrRouteLastEnabledTime variable contains the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIpCidrRoutePreference 1.3.6.1.4.1.6527.3.1.2.3.7.1.2
When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrIpCidrRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..255  

vRtrIpCidrRouteMetric 1.3.6.1.4.1.6527.3.1.2.3.7.1.3
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrStaticRouteNumber 1.3.6.1.4.1.6527.3.1.2.3.8
The number of current vRtrStaticRouteTable entries that are 'active'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrStaticRouteTable 1.3.6.1.4.1.6527.3.1.2.3.9
This entity's Static Routing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrStaticRouteEntry

vRtrStaticRouteEntry 1.3.6.1.4.1.6527.3.1.2.3.9.1
A particular route to a particular destination, through a particular next hop.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrStaticRouteEntry  

vRtrStaticRouteDest 1.3.6.1.4.1.6527.3.1.2.3.9.1.1
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vRtrStaticRouteMask 1.3.6.1.4.1.6527.3.1.2.3.9.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vRtrStaticRouteIndex 1.3.6.1.4.1.6527.3.1.2.3.9.1.3
The quaternary index for the vRtrStaticRouteTable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

vRtrStaticRouteRowStatus 1.3.6.1.4.1.6527.3.1.2.3.9.1.4
The row status variable, used according to row installation and removal conventions.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrStaticRouteLastEnabledTime 1.3.6.1.4.1.6527.3.1.2.3.9.1.5
The vRtrStaticRouteLastEnabledTime variable contains the sysUpTime value when vRtrStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrStaticRouteStatus 1.3.6.1.4.1.6527.3.1.2.3.9.1.6
The value of vRtrStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

vRtrStaticRouteStaticType 1.3.6.1.4.1.6527.3.1.2.3.9.1.7
The value of vRtrStaticRouteStaticType indicates the type of static route represented by this row entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), nextHop(1), indirect(2), blackHole(3)  

vRtrStaticRoutePreference 1.3.6.1.4.1.6527.3.1.2.3.9.1.8
The value of vRtrStaticRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..255  

vRtrStaticRouteMetric 1.3.6.1.4.1.6527.3.1.2.3.9.1.9
When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrStaticRouteEgressIfIndex 1.3.6.1.4.1.6527.3.1.2.3.9.1.11
The outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrStaticRouteNextHop 1.3.6.1.4.1.6527.3.1.2.3.9.1.12
In case of remote routes, the address of the next system en route. This member is complemented by vRtrStaticRouteNextHopUnnumberedIf. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrStaticRouteNextHopUnnumberedIf 1.3.6.1.4.1.6527.3.1.2.3.9.1.13
The name of the unnumbered Interface which will be the nexthop for this route. This member is complemented by vRtrStaticRouteNextHop. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

vRtrStaticRouteAdminState 1.3.6.1.4.1.6527.3.1.2.3.9.1.14
The desired administrative state for this virtual router static route
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrStaticRouteIgpShortcut 1.3.6.1.4.1.6527.3.1.2.3.9.1.15
The value of vRtrStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). The bits of vRtrStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
Status: current Access: read-create
OBJECT-TYPE    
  BITS te(0), ldp(1), ip(2)  

vRtrStaticRouteDisallowIgp 1.3.6.1.4.1.6527.3.1.2.3.9.1.16
The value of vRtrStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). If the value of vRtrStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrStaticRouteTag 1.3.6.1.4.1.6527.3.1.2.3.9.1.17
The value of vRtrStaticRouteTag is used to add a 32-bit integer tag to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vRtrSvcIpRangeTable 1.3.6.1.4.1.6527.3.1.2.3.10
The vRtrSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address ranges assigned to it.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrSvcIpRangeEntry

vRtrSvcIpRangeEntry 1.3.6.1.4.1.6527.3.1.2.3.10.1
Each row entry represents an IP address range assigned a virtual router service interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrSvcIpRangeEntry  

vRtrSvcIpRangeAddress 1.3.6.1.4.1.6527.3.1.2.3.10.1.1
The IP address prefix range assigned to a router's service interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrSvcIpRangeMask 1.3.6.1.4.1.6527.3.1.2.3.10.1.2
The subnet mask associated with the Service IP address of this entry. The value of the mask is an 32-bit integer with all the network bits set to 1 and all the host bits set to 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..32  

vRtrSvcIpRangeRowStatus 1.3.6.1.4.1.6527.3.1.2.3.10.1.3
The row status used for creation, deletion, or control of vRtrSvcIpRangeTable entries.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrSvcIpRangeExclusive 1.3.6.1.4.1.6527.3.1.2.3.10.1.4
When vRtrSvcIpRangeExclusive has a value of 'true', this set of addresses is reserved for services only and cannot be assigned to network ports. When it has a value of 'false', it could be used for services as well as network ports.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIpNetToMediaTable 1.3.6.1.4.1.6527.3.1.2.3.11
The vRtrIpNetToMediaTable provides an extension of the ipNetToMediaTable in the IP-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIpNetToMediaEntry

vRtrIpNetToMediaEntry 1.3.6.1.4.1.6527.3.1.2.3.11.1
Each row entry in the vRtrIpNetToMediaTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the vRtrIpNetToMediaTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIpNetToMediaEntry  

vRtrIpNetToMediaTimer 1.3.6.1.4.1.6527.3.1.2.3.11.1.1
The value of vRtrIpNetToMediaTimer determines how much longer an ARP entry associated with an vRtrIpNetToMediaTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToMediaTimer has a value of zero, '0', the entry is cleared from the cache.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrIpNetToMediaOperState 1.3.6.1.4.1.6527.3.1.2.3.11.1.2
The value of vRtrIpNetToMediaOperState specifies if the ARP entry is being used actively in the ARP Table. When ipNetToMediaType has a value 'dynamic', vRtrIpNetToMediaOperState will never have a value of 'outOfService'.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrInstanceAggregationTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.12
Timestamp of the last change to the vRtrInstanceAggregationTable either from adding a row or removing a row.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrInstanceAggregationTable 1.3.6.1.4.1.6527.3.1.2.3.13
The vRtrInstanceAggregationTable is the list of configured VRtr aggregations and their operational status information. Specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated. This table was obsoleted in release 7.0. It is replaced with the vRtrInetInstAggrTable to support ipv6 addresses.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInstanceAggregationEntry

vRtrInstanceAggregationEntry 1.3.6.1.4.1.6527.3.1.2.3.13.1
An entry (conceptual row) in the vRtrInstanceAggregationTable. Entries are created by user. Entries are destroyed by user.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VRtrInstanceAggregationEntry  

vRtrAggregationIpPrefix 1.3.6.1.4.1.6527.3.1.2.3.13.1.1
IP address prefix to match for the aggregation.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vRtrAggregationIpPrefixMask 1.3.6.1.4.1.6527.3.1.2.3.13.1.2
Mask length for vRtrAggregationIpPrefix, to match for the aggregation.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  IpAddressPrefixLength  

vRtrAggregationRowStatus 1.3.6.1.4.1.6527.3.1.2.3.13.1.3
Row status for this entry.
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrAggregationLastChanged 1.3.6.1.4.1.6527.3.1.2.3.13.1.4
Time stamp of last change of any object for this entry.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TimeStamp  

vRtrAggregationSummaryOnly 1.3.6.1.4.1.6527.3.1.2.3.13.1.5
When true(1), only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When false(2), both the aggregate and more specific components are advertised.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrAggregationASSet 1.3.6.1.4.1.6527.3.1.2.3.13.1.6
When true(1), the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When false(2), the AS-Path will contain no AS-SET and will be originated by the ESR.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrAggregationAggregatorAS 1.3.6.1.4.1.6527.3.1.2.3.13.1.7
When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TmnxBgpAutonomousSystem  

vRtrAggregationAggregatorIPAddr 1.3.6.1.4.1.6527.3.1.2.3.13.1.8
When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID.
Status: obsolete Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrAggregationOperState 1.3.6.1.4.1.6527.3.1.2.3.13.1.9
vRtrAggregationOperState specifies the current operational status of the aggregation entry.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrStaticRouteIndexTable 1.3.6.1.4.1.6527.3.1.2.3.14
This entity's Static Route Index Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrStaticRouteIndexEntry

vRtrStaticRouteIndexEntry 1.3.6.1.4.1.6527.3.1.2.3.14.1
The available index for the vRtrStaticRouteTable for every destination per virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrStaticRouteIndexEntry  

vRtrStaticRouteIndexDest 1.3.6.1.4.1.6527.3.1.2.3.14.1.1
The destination IP address of this index entry. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vRtrStaticRouteIndexMask 1.3.6.1.4.1.6527.3.1.2.3.14.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vRtrStaticRouteAvailableIndex 1.3.6.1.4.1.6527.3.1.2.3.14.1.3
The available quaternary index for the vRtrStaticRouteTable.
Status: current Access: read-only
OBJECT-TYPE    
  TestAndIncr 1..2147483647  

vRtrTunnelTable 1.3.6.1.4.1.6527.3.1.2.3.17
vRtrTunnelTable maintains a list of tunnels for the specific router instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrTunnelEntry

vRtrTunnelEntry 1.3.6.1.4.1.6527.3.1.2.3.17.1
vRtrTunnelEntry defines a tunnel to a particular destination in a specific router context. A tunnel to a specific destination could established using GRE, LDP, RSVP or could be a static LSP.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrTunnelEntry  

vRtrTunnelDest 1.3.6.1.4.1.6527.3.1.2.3.17.1.1
vRtrTunnelDest maintains the destination IP address of this tunnel. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrTunnelMask object is not equal to x.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vRtrTunnelMask 1.3.6.1.4.1.6527.3.1.2.3.17.1.2
vRtrTunnelMask indicates the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrTunnelDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrTunnelMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vRtrTunnelPreference 1.3.6.1.4.1.6527.3.1.2.3.17.1.3
The value of vRtrTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources such as LDP, RSVP, GRE etc. This is an absolute number used internally by the system to specify preferences for the tunnel. Lowest number signifies the most preferred entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..255  

vRtrTunnelType 1.3.6.1.4.1.6527.3.1.2.3.17.1.4
The type of this tunnel entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxTunnelType  

vRtrTunnelID 1.3.6.1.4.1.6527.3.1.2.3.17.1.5
Additional index provided to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'sdp'. In such cases the vRtrTunnelID will hold the SDP Id. There could be multiple tunnels for the type 'ldp'. In such cases the vRtrTunnelID will hold the LSPId of the LSP in use. For other vRtrTunnelType values this field will always be 0 as only a single tunnel is established using other tunnel types.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxTunnelID  

vRtrTunnelNexthop 1.3.6.1.4.1.6527.3.1.2.3.17.1.6
The address of the next system en route; Otherwise, 0.0.0.0.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

vRtrTunnelMetric 1.3.6.1.4.1.6527.3.1.2.3.17.1.7
vRtrTunnelMetric maintains the metric of the tunnel. This is used in addition to the preference for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrTunnelAge 1.3.6.1.4.1.6527.3.1.2.3.17.1.8
The number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of `too old' can be implied except through knowledge of owner of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrAdvPrefixTable 1.3.6.1.4.1.6527.3.1.2.3.23
This table allows the user to configure IPv6 prefixes for router advertisements on an interface
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrAdvPrefixEntry

vRtrAdvPrefixEntry 1.3.6.1.4.1.6527.3.1.2.3.23.1
An entry in the vRtrAdvPrefixTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrAdvPrefixEntry  

vRtrAdvPrefixIfIndex 1.3.6.1.4.1.6527.3.1.2.3.23.1.1
The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

vRtrAdvPrefixPrefix 1.3.6.1.4.1.6527.3.1.2.3.23.1.2
The ipv6 address prefix. The length of this object is the standard length (16 bytes ) for IPv6 prefixes.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(16)  

vRtrAdvPrefixLength 1.3.6.1.4.1.6527.3.1.2.3.23.1.3
The prefix length associated with this prefix. The value 0 has no special meaning for this object.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength 4..127  

vRtrAdvPrefixRowStatus 1.3.6.1.4.1.6527.3.1.2.3.23.1.4
The row status used for creation and deletion of router advertisement prefix entries.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrAdvPrefixOnLinkFlag 1.3.6.1.4.1.6527.3.1.2.3.23.1.5
This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrAdvPrefixAutonomousFlag 1.3.6.1.4.1.6527.3.1.2.3.23.1.6
Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrAdvPrefixPreferredLifetime 1.3.6.1.4.1.6527.3.1.2.3.23.1.7
The remaining length of time in seconds that this prefix will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

vRtrAdvPrefixValidLifetime 1.3.6.1.4.1.6527.3.1.2.3.23.1.8
The remaining length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

vRtrInetStaticRouteTable 1.3.6.1.4.1.6527.3.1.2.3.24
The table of addressing information relevant to this entity's Static Routing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInetStaticRouteEntry

vRtrInetStaticRouteEntry 1.3.6.1.4.1.6527.3.1.2.3.24.1
A particular route to a particular destination, through a particular next hop.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrInetStaticRouteEntry  

vRtrInetStaticRouteDestType 1.3.6.1.4.1.6527.3.1.2.3.24.1.1
The value of vRtrInetStaticRouteDestType indicates the address type of vRtrInetStaticRouteDest address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrInetStaticRouteDest 1.3.6.1.4.1.6527.3.1.2.3.24.1.2
The value of vRtrInetStaticRouteDest indicates the destination IP address of this static route.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

vRtrInetStaticRouteDestPfxLen 1.3.6.1.4.1.6527.3.1.2.3.24.1.3
The value of vRtrInetStaticRouteDestPfxLen indicates the prefix length associated with the vRtrInetStaticRouteDest address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrInetStaticRouteIndex 1.3.6.1.4.1.6527.3.1.2.3.24.1.4
The value of vRtrInetStaticRouteIndex indicates the fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..2147483647  

vRtrInetStaticRouteRowStatus 1.3.6.1.4.1.6527.3.1.2.3.24.1.5
vRtrInetStaticRouteRowStatus controls the creation and deletion of rows in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrInetStaticRouteLastEnabledTime 1.3.6.1.4.1.6527.3.1.2.3.24.1.6
The value of vRtrInetStaticRouteLastEnabledTime indicates the sysUpTime value when vRtrInetStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrInetStaticRouteStatus 1.3.6.1.4.1.6527.3.1.2.3.24.1.7
The value of vRtrInetStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

vRtrInetStaticRouteStaticType 1.3.6.1.4.1.6527.3.1.2.3.24.1.8
The value of vRtrInetStaticRouteStaticType specifies the type of static route represented by this row entry. The values of vRtrInetStaticRouteNextHopType, vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName depends on the value of vRtrInetStaticRouteStaticType. For details please look at the following chart: vRtrInetStaticRouteStaticType unknown nexthop indirect blackHole grt --------------------------------------------------------------------- vRtrInetStaticRouteNextHopType unknown valid valid unknown unknown vRtrInetStaticRouteNextHop null valid valid null null vRtrInetStaticRouteNextHopIf null valid null null null vRtrInetStaticRouteNHTunnelName null valid null null null Though all the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be valid when the value of vRtrInetStaticRouteStaticType is 'nexthop', please note that at most only one of them can have a non null string.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), nextHop(1), indirect(2), blackHole(3), grt(4)  

vRtrInetStaticRoutePreference 1.3.6.1.4.1.6527.3.1.2.3.24.1.9
The value of vRtrInetStaticRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..255  

vRtrInetStaticRouteMetric 1.3.6.1.4.1.6527.3.1.2.3.24.1.10
The value of vRtrInetStaticRouteMetric specifies the metric for the static route. When ipCidrRouteProto has a value of 'netmgmt' to specify that this entry is a static route, the value of vRtrInetStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrInetStaticRouteEgressIfIndex 1.3.6.1.4.1.6527.3.1.2.3.24.1.11
The value of vRtrInetStaticRouteEgressIfIndex indicates the outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrInetStaticRouteStatus is 'inactive' or if this static route is configured as a black hole.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrInetStaticRouteNextHopType 1.3.6.1.4.1.6527.3.1.2.3.24.1.12
The value of vRtrInetStaticRouteNextHopType specifies the address type of vRtrInetStaticRouteNextHop address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrInetStaticRouteNextHop 1.3.6.1.4.1.6527.3.1.2.3.24.1.13
The value of vRtrInetStaticRouteNextHop specifies the ip address of the next hop for the static route and it depends on the value of vRtrInetStaticRouteStaticType. At most only one of the values of the three objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be a non null string. If the value of vRtrInetStaticRouteStaticType is 'unknown' or 'blackHole' then the value of vRtrInetStaticRouteNextHopType should be 'unknown' and the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteNHTunnelName should be null strings.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

vRtrInetStaticRouteNextHopIf 1.3.6.1.4.1.6527.3.1.2.3.24.1.14
The value of vRtrInetStaticRouteNextHopIf specifies the name of the interface to be used for the next hop of this static route and it depends on the value of vRtrInetStaticRouteStaticType. At most only one of the values of the three objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be a non null string. If the value of vRtrInetStaticRouteStaticType is 'unknown' or 'blackHole' then the value of vRtrInetStaticRouteNextHopType should be 'unknown' and the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteNHTunnelName should be null strings.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

vRtrInetStaticRouteAdminState 1.3.6.1.4.1.6527.3.1.2.3.24.1.15
The value of vRtrInetStaticRouteAdminState specifies the desired administrative state for this virtual router static route
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrInetStaticRouteIgpShortcut 1.3.6.1.4.1.6527.3.1.2.3.24.1.16
The value of vRtrInetStaticRouteIgpShortcut specifies the Layer 2 tunneling mechanism used for IGP shortcuts. The value of vRtrInetStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). The bits of vRtrInetStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop.
Status: current Access: read-create
OBJECT-TYPE    
  BITS te(0), ldp(1), ip(2)  

vRtrInetStaticRouteDisallowIgp 1.3.6.1.4.1.6527.3.1.2.3.24.1.17
The value of vRtrInetStaticRouteDisallowIgp specifies if IGP shortcuts are to be used or not. The value of vRtrInetStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). If the value of vRtrInetStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrInetStaticRouteTag 1.3.6.1.4.1.6527.3.1.2.3.24.1.18
The value of vRtrInetStaticRouteTag specifies a 32-bit integer tag that is used to add to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vRtrInetStaticRouteEnableBfd 1.3.6.1.4.1.6527.3.1.2.3.24.1.19
The value of vRtrInetStaticRouteEnableBfd specifies whether or not Bi-directional Forwarding Detection is enabled on this static route. When the value is 'true', this static-route can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrInetStaticRouteCpeAddrType 1.3.6.1.4.1.6527.3.1.2.3.24.1.20
The value of vRtrInetStaticRouteCpeAddrType specifies the address type of vRtrInetStaticRouteCpeAddr address. When the value of vRtrInetStaticRouteCpeAddrType is not 'unknown', statitistics for the Customer-Provided Equipment (CPE) host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrInetStaticRouteCpeAddr 1.3.6.1.4.1.6527.3.1.2.3.24.1.21
The value of vRtrInetStaticRouteCpeAddr specifies the IP address of the target CPE device. When this object is configured, ICMP pings will be sent to this target IP address to determine CPE connectivity and whether this static route should be active. When the value of vRtrInetStaticRouteCpeAddr is non-empty, statitistics for the CPE host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrInetStaticRouteCpeInterval 1.3.6.1.4.1.6527.3.1.2.3.24.1.22
The value of vRtrInetStaticRouteCpeInterval specifies the interval, in seconds, between ICMP pings to the target CPE IP address, vRtrInetStaticRouteCpeAddr.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..255  

vRtrInetStaticRouteCpeDropCnt 1.3.6.1.4.1.6527.3.1.2.3.24.1.23
The value of vRtrInetStaticRouteCpeDropCnt specifies the number of consecutive ping-replies that must be missed before concluding the CPE is down. If the CPE is determined to be down, the associated static route will be deactivated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..255  

vRtrInetStaticRouteCpeEnableLog 1.3.6.1.4.1.6527.3.1.2.3.24.1.24
The value of vRtrInetStaticRouteCpeEnableLog specifies whether to enable the logging of transitions between active and in-active based on the CPE connectivity check. A value of 'true (1)' indicates that logging should be enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrInetStaticRouteNHTunnelName 1.3.6.1.4.1.6527.3.1.2.3.24.1.25
The value of vRtrInetStaticRouteNHTunnelName specifies the name of the IPsec tunnel to be used for the nexthop of this static route and it depends on the value of vRtrInetStaticRouteStaticType. The value of vRtrInetStaticRouteNHTunnelName is valid only for static routes configured for a vprn service. An 'inconsistentValue' error is returned if an attempt is made to set this object for the base instance which can be identified by vRtrID value of '1'. At most only one of the values of the three objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be a non null string. If the value of vRtrInetStaticRouteStaticType is 'blackHole' then the value of vRtrInetStaticRouteNextHopType should be 'unknown' and the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteNHTunnelName should be null strings.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrInetStaticRoutePrefixListName 1.3.6.1.4.1.6527.3.1.2.3.24.1.26
The value of vRtrInetStaticRoutePrefixListName specifies the name of a prefix list to match on. This value allows the existence of specified routes within the Route Table Manager (RTM) to trigger the addition of a static route in the RTM. If any of the routes specified in the vRtrInetStaticRoutePrefixListName exists in the RTM, then the associated static route should be added to the RTM.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrInetStaticRoutePrefixListFlag 1.3.6.1.4.1.6527.3.1.2.3.24.1.27
The value of vRtrInetStaticRoutePrefixListFlag specifies the routes to match on from vRtrInetStaticRoutePrefixListName. If 'all (1)' is specified, all of the routes specified in the vRtrInetStaticRoutePrefixListName should exist in the Route Table Manager (RTM) for the associated static-route to be added in the RTM. If 'none (2)' is specified, none of the routes specified in the vRtrInetStaticRoutePrefixListName should exist in the RTM for the associated static-route to be added in the RTM. The value of vRtrInetStaticRoutePrefixListFlag will be reset to the default value when vRtrInetStaticRoutePrefixListName is set to the default value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(0), all(1), none(2)  

vRtrInetStaticRouteLdpSync 1.3.6.1.4.1.6527.3.1.2.3.24.1.28
The value of vRtrInetStaticRouteLdpSync specifies whether the the LDP synchronization timer for this route on an interface, vRtrIfLdpSyncTimer, is enabled or not. If the value of vRtrInetStaticRouteLdpSync is 'true (1)', this static route would not enable the preferred route immediately after the interface to the next-hop comes up but would wait for the LDP adjacency on the link to come up and start the ldp sync timer, vRtrIfLdpSyncTimer. On timer expiration, routing will enable the static route. If the value of vRtrInetStaticRouteLdpSync is 'false (2)', vRtrIfLdpSyncTimer would not be applied to this static route.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrInetStaticRouteFC 1.3.6.1.4.1.6527.3.1.2.3.24.1.29
The value of vRtrInetStaticRouteFC specifies the forwarding class associated with the static route. This object can take one of the following eight values - 'be', 'l2', 'af', 'l1', 'h2', 'ef', 'h1' or 'nc'. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when vRtrInetStaticRouteStaticType is not set to either 'indirect' or 'nexthop'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrInetStaticRouteFCPriority 1.3.6.1.4.1.6527.3.1.2.3.24.1.30
The value of vRtrInetStaticRouteFCPriority specifies the priority to be assigned to the static routes. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when vRtrInetStaticRouteStaticType is not set to either 'indirect' or 'nexthop'.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrUndefined  

vRtrInetStaticRouteIndexTable 1.3.6.1.4.1.6527.3.1.2.3.25
This entity's Static Route Index Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInetStaticRouteIndexEntry

vRtrInetStaticRouteIndexEntry 1.3.6.1.4.1.6527.3.1.2.3.25.1
The available index for the vRtrInetStaticRouteTable for every destination per virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrInetStaticRouteIndexEntry  

vRtrInetStaticRouteAvailIndex 1.3.6.1.4.1.6527.3.1.2.3.25.1.1
The value of vRtrInetStaticRouteAvailIndex indicates the available fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address.
Status: current Access: read-only
OBJECT-TYPE    
  TestAndIncr 1..2147483647  

vRtrInetInstAggrTblLastChged 1.3.6.1.4.1.6527.3.1.2.3.26
Timestamp of the last change to the vRtrInetInstAggrTable either from adding a row or removing a row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrInetInstAggrTable 1.3.6.1.4.1.6527.3.1.2.3.27
The vRtrInetInstAggrTable is the list of configured virtual router aggregations and their operational status information. vRtrInetInstAggrTable specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInetInstAggrEntry

vRtrInetInstAggrEntry 1.3.6.1.4.1.6527.3.1.2.3.27.1
vRtrInetInstAggrEntry indicates an entry (conceptual row) in the vRtrInetInstAggrTable. Entries are created and destroyed by user.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrInetInstAggrEntry  

vRtrInetAggrIpPrefixType 1.3.6.1.4.1.6527.3.1.2.3.27.1.1
The value of vRtrInetAggrIpPrefixType indicates the IP address type of vRtrInetAggrIpPrefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrInetAggrIpPrefix 1.3.6.1.4.1.6527.3.1.2.3.27.1.2
The value of vRtrInetAggrIpPrefixType indicates the IP address prefix to match for the aggregation.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

vRtrInetAggrIpPrefixLen 1.3.6.1.4.1.6527.3.1.2.3.27.1.3
The value of vRtrInetAggrIpPrefixLen indicates the prefix length for vRtrInetAggrIpPrefix, to match for the aggregation.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrInetAggrRowStatus 1.3.6.1.4.1.6527.3.1.2.3.27.1.4
vRtrInetAggrRowStatus controls the creation and deletion of rows in the table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrInetAggrLastChanged 1.3.6.1.4.1.6527.3.1.2.3.27.1.5
The value of vRtrInetAggrLastChanged indicates the time stamp of the last change to this row of vRtrInetInstAggrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrInetAggrSummaryOnly 1.3.6.1.4.1.6527.3.1.2.3.27.1.6
The value of vRtrInetAggrSummaryOnly specifies if specific routes that make up aggregates are advertised or not. When vRtrInetAggrSummaryOnly has value of 'true(1)', only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When vRtrInetAggrSummaryOnly has value of 'false(2)', both the aggregate and more specific components are advertised.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrInetAggrASSet 1.3.6.1.4.1.6527.3.1.2.3.27.1.7
The value of vRtrInetAggrASSet specifies whether the aggregate route has AS-SET. When vRtrInetAggrASSet has value of 'true(1)', the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When vRtrInetAggrASSet has value of 'false(2)', the AS-Path will contain no AS-SET and will be originated by the ESR.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrInetAggrAggregatorAS 1.3.6.1.4.1.6527.3.1.2.3.27.1.8
The value of vRtrInetAggrAggregatorAS specifies the aggregator's ASN. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrInetAggrAggregatorAS4Byte.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TmnxBgpAutonomousSystem  

vRtrInetAggrAggregatorIPAddr 1.3.6.1.4.1.6527.3.1.2.3.27.1.9
The value of vRtrInetAggrAggregatorIPAddr specifies the aggregator's IP address. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorIPAddr is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vRtrInetAggrOperState 1.3.6.1.4.1.6527.3.1.2.3.27.1.10
The value of vRtrInetAggrOperState specifies the current operational status of the aggregation entry.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrInetAggrAggregatorAS4Byte 1.3.6.1.4.1.6527.3.1.2.3.27.1.11
The value of vRtrInetAggrAggregatorAS4Byte specifies the aggregator's Autonomous System Number (ASN). When vRtrInetAggrAggregatorAS4Byte is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS4Byte is not set, the aggregate routes ASN and Router-ID will be used for the aggregator path attributes.
Status: current Access: read-create
OBJECT-TYPE    
  InetAutonomousSystemNumber  

vRtrInetAggrNextHopType 1.3.6.1.4.1.6527.3.1.2.3.27.1.12
The value of vRtrInetAggrNextHopType specifies whether the aggregate route will be installed in the Forwarding Information Base (FIB) when the route is activated. When vRtrInetAggrNextHopType has a value of 'none', the aggregate route will not be installed in the FIB. When vRtrInetAggrNextHopType has a value of 'blackHole' and the aggregate route is active, it will be installed in the FIB with a black-hole next-hop and packets matching this route will be discarded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), blackHole(1)  

vRtrInetSvcIpRangeTable 1.3.6.1.4.1.6527.3.1.2.3.28
The vRtrInetSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address range assigned to it.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInetSvcIpRangeEntry

vRtrInetSvcIpRangeEntry 1.3.6.1.4.1.6527.3.1.2.3.28.1
Each row entry represents an IP address range assigned a virtual router service interface. Setting RowStatus to 'active' requires values for all column variables to have been assigned.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrInetSvcIpRangeEntry  

vRtrInetSvcIpRangeAddrType 1.3.6.1.4.1.6527.3.1.2.3.28.1.1
The value of vRtrInetSvcIpRangeAddrType indicates the IP address type of vRtrInetSvcIpRangeAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrInetSvcIpRangeAddr 1.3.6.1.4.1.6527.3.1.2.3.28.1.2
The value of vRtrInetSvcIpRangeAddr indicates the IP address service range assigned to a router's service interface. The address type of vRtrInetSvcIpRangeAddr is indicated by vRtrInetSvcIpRangeAddrType.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

vRtrInetSvcIpRangePfxLen 1.3.6.1.4.1.6527.3.1.2.3.28.1.3
The value of vRtrInetSvcIpRangePfxLen specifies the prefix length to be used with vRtrInetSvcIpRangeAddr for determining the IP address range.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrInetSvcIpRangeRowStatus 1.3.6.1.4.1.6527.3.1.2.3.28.1.4
The value of vRtrInetSvcIpRangeRowStatus is used for creation and deletion of IP service prefix ranges.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrInetSvcIpRangeExclusive 1.3.6.1.4.1.6527.3.1.2.3.28.1.5
The value of vRtrInetSvcIpRangeExclusive specifies how the set of addresses specified by this entry are interpreted. When the value is 'true', they are reserved for services only and cannot be assigned to network ports. When the value is 'false', it could be used for services as well as network ports.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIpNetToPhysicalTable 1.3.6.1.4.1.6527.3.1.2.3.29
The vRtrIpNetToPhysicalTable provides an extension of the ipNetToPhysicalTable in the IP-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIpNetToPhysicalEntry

vRtrIpNetToPhysicalEntry 1.3.6.1.4.1.6527.3.1.2.3.29.1
Each row entry in the vRtrIpNetToPhysicalTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the vRtrIpNetToPhysicalTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIpNetToPhysicalEntry  

vRtrIpNetToPhysicalTimer 1.3.6.1.4.1.6527.3.1.2.3.29.1.1
The value of vRtrIpNetToPhysicalTimer indicates how much longer an ARP entry associated with an vRtrIpNetToPhysicalTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToPhysicalTimer has a value of zero, '0', the entry is cleared from the cache.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vRtrIpNetToPhysicalOperState 1.3.6.1.4.1.6527.3.1.2.3.29.1.2
The value of vRtrIpNetToPhysicalOperState indicates if the ARP entry is being used actively in the ARP Table. When ipNetToPhysicalType has a value 'dynamic', vRtrIpNetToPhysicalOperState will never have a value of 'outOfService'.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrIpNetToPhysicalIsRouter 1.3.6.1.4.1.6527.3.1.2.3.29.1.3
The value of vRtrIpNetToPhysicalIsRouter indicates whether this ipNetToPhysicalEntry is a router.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrIpNetToPhysicalMTU 1.3.6.1.4.1.6527.3.1.2.3.29.1.4
The value of vRtrIpNetToPhysicalMTU indicates the MTU of the link attached to this ipNetToPhysicalEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIpNetToPhysicalPort 1.3.6.1.4.1.6527.3.1.2.3.29.1.5
The value of vRtrIpNetToPhysicalPort indicates the ID of the port on which this entry was learned.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxPortID  

vRtrIpNetToPhysicalEncap 1.3.6.1.4.1.6527.3.1.2.3.29.1.6
The value of vRtrIpNetToPhysicalEncap indicates the encap value of the SAP this entry was learned on. If this entry was learned on a network port or null-encap SAP, the value of this object will be zero.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxEncapVal  

vRtrInetCidrRouteTable 1.3.6.1.4.1.6527.3.1.2.3.30
The vRtrInetCidrRouteTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInetCidrRouteEntry

vRtrInetCidrRouteEntry 1.3.6.1.4.1.6527.3.1.2.3.30.1
Each row entry in the vRtrInetCidrRouteTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the IP route table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrInetCidrRouteEntry  

vRtrInetCidrRouteLastEnabledTime 1.3.6.1.4.1.6527.3.1.2.3.30.1.1
The vRtrInetCidrRouteLastEnabledTime variable indicates the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrInetCidrRoutePreference 1.3.6.1.4.1.6527.3.1.2.3.30.1.2
The value of vRtrInetCidrRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc, when ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vRtrInetCidrRouteMetric 1.3.6.1.4.1.6527.3.1.2.3.30.1.3
The value of vRtrInetCidrRouteMetric indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrInetCidrRouteIfVRtrId 1.3.6.1.4.1.6527.3.1.2.3.30.1.4
The value of vRtrInetCidrRouteIfVRtrId indicates the virtual router instance of the egress interface defined by inetCidrRouteIfIndex. This object is valid only for subscriber management routes. For all other route types, this object will have a value of zero.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxVRtrIDOrZero  

vRtrInetCidrRouteTunnEndpntInfo 1.3.6.1.4.1.6527.3.1.2.3.30.1.5
The value of vRtrInetCidrRouteTunnEndpntInfo indicates tunnel endpoint information. The first 4 bytes indicate number of tunnel end-points, the next 4 bytes indicate IGP cost to reach tunnel end-points and the next 64 bytes indicate upto 16 4-byte IPv4 addresses (the number of end-points represented by bytes 1-4 indicate how many addresses are present). When no tunnel endpoints exist, the size of this object will be 0. When atleast one tunnel-endpoint exists, there would be 12 bytes to represent the information related to one tunnel endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0|12..136)  

vRtrInetCidrProtocolInstance 1.3.6.1.4.1.6527.3.1.2.3.30.1.6
The value of vRtrInetCidrProtocolInstance indicates the instance of the protocol through which this route was learned. A single instance protocol will always return an instance value 0.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..31  

vRtrInetCidrRouteNextHopType 1.3.6.1.4.1.6527.3.1.2.3.30.1.7
The value of vRtrInetCidrRouteNextHopType indicates the type of next hop for this route.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetCidrNextHopType  

vRtrInetCidrRouteNextHopOwner 1.3.6.1.4.1.6527.3.1.2.3.30.1.8
The value of vRtrInetCidrRouteNextHopOwner indicates the owner of next hop for this route.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetCidrNextHopOwner  

vRtrInetCidrRouteNHOwnerAuxInfo 1.3.6.1.4.1.6527.3.1.2.3.30.1.9
The value of vRtrInetCidrRouteNHOwnerAuxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetCidrRouteNextHopOwner. The value of vRtrInetCidrRouteNHOwnerAuxInfo indicates the number of tunnel-ids existing for this next hop type and owner.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrInetCidrRouteNHFC 1.3.6.1.4.1.6527.3.1.2.3.30.1.10
The value of vRtrInetCidrRouteNHFC indicates the forwarding class or the sub forwarding class associated with the CIDR route. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name].
Status: current Access: read-only
OBJECT-TYPE    
  TFCNameOrEmpty  

vRtrInetCidrRouteNHPriority 1.3.6.1.4.1.6527.3.1.2.3.30.1.11
The value of vRtrInetCidrRouteNHPriority indicates the priority to be assigned to the CIDR routes.
Status: current Access: read-only
OBJECT-TYPE    
  TPriorityOrUndefined  

vRtrInetCidrRouteBkupFlags 1.3.6.1.4.1.6527.3.1.2.3.30.1.12
The value of vRtrInetCidrRouteBkupFlags indicates the presence or absence of LFA next-hops and backup routes. 'none' indicates that no next-hop is present. 'hasLfa' indicates that an LFA next-hop is present in addition to the regular next-hop. 'hasBackup' indicates that this route has a backup route. 'isBackup' indicates that this route is a backup route to another route with the same prefix.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), hasLfa(1), hasBackup(2), isBackup(3)  

vRtrInetCidrRouteBkupNextHopType 1.3.6.1.4.1.6527.3.1.2.3.30.1.13
The value of vRtrInetCidrRouteBkupNextHopType indicates the IP address type of vRtrInetCidrRouteBkupNextHop. The value of vRtrInetCidrRouteBkupNextHopType is only valid when vRtrInetCidrRouteBkupFlags has a value of 'hasLfa'.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrInetCidrRouteBkupNextHop 1.3.6.1.4.1.6527.3.1.2.3.30.1.14
The value of vRtrInetCidrRouteBkupNextHop indicates the IP address of a backup next-hop. The value of vRtrInetCidrRouteBkupNextHop is only valid when vRtrInetCidrRouteBkupFlags has a value of 'hasLfa'.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

vRtrInetCidrRouteBkupMetric 1.3.6.1.4.1.6527.3.1.2.3.30.1.15
The value of vRtrInetCidrRouteBkupMetric indicates the routing metric for a backup route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. The value of vRtrInetCidrRouteBkupMetric is only valid when vRtrInetCidrRouteBkupFlags has a value of 'hasLfa'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrInetCidrRouteNextHopRepCount 1.3.6.1.4.1.6527.3.1.2.3.30.1.16
The value of vRtrInetCidrRouteNextHopRepCount indicates the number of times the next-hop repeats for a particular route.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrInetCidrRouteBkupNHType 1.3.6.1.4.1.6527.3.1.2.3.30.1.17
The value of vRtrInetCidrRouteBkupNHType indicates the type of next hop for this backup route.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetCidrNextHopType  

vRtrInetCidrRouteBkupNHOwner 1.3.6.1.4.1.6527.3.1.2.3.30.1.18
The value of vRtrInetCidrRouteBkupNHOwner indicates the owner of next hop for this backup route.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetCidrNextHopOwner  

vRtrInetCidrRouteBkupNHOwnAxInfo 1.3.6.1.4.1.6527.3.1.2.3.30.1.19
The value of vRtrInetCidrRouteBkupNHOwnAxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetCidrRouteBkupNHOwner. The value of vRtrInetCidrRouteBkupNHOwnAxInfo indicates the tunnel-id existing for this backup next hop type and owner.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfGlobalIndexTable 1.3.6.1.4.1.6527.3.1.2.3.37
This is a read-only table, each row of which represents a one to one equivalence between a unique system wide router interface index (vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID) and index in the vRtrIfTable (vRtrIfIndex).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfGlobalIndexEntry

vRtrIfGlobalIndexEntry 1.3.6.1.4.1.6527.3.1.2.3.37.1
Each row entry in the vRtrIfGlobalIndexTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfGlobalIndexEntry  

vRtrIfGlobalIndexvRtrID 1.3.6.1.4.1.6527.3.1.2.3.37.1.1
The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex. This value represents the specific instance of virtual router which the vRtrIfGlobalIndex belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxVRtrID  

vRtrIfGlobalIndexvRtrIfIndex 1.3.6.1.4.1.6527.3.1.2.3.37.1.2
The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrIfProxyNDTable 1.3.6.1.4.1.6527.3.1.2.3.38
The vRtrIfProxyNDTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfProxyNDEntry

vRtrIfProxyNDEntry 1.3.6.1.4.1.6527.3.1.2.3.38.1
Each row entry represents information related to Proxy Neighbor Discovery for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfProxyNDEntry  

vRtrIfProxyNDLocal 1.3.6.1.4.1.6527.3.1.2.3.38.1.1
If the value of vRtrIfProxyNDLocal is set to 'true', local proxy Neighbor Discovery is enabled, that is, the interface will reply to Neighbor Solicitation requests when both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyNDLocal is set to 'false', the interface will not reply to Neighbor Solicitation requests if both the hosts are on the same subnet.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfProxyNDPolicy1 1.3.6.1.4.1.6527.3.1.2.3.38.1.2
The value of vRtrIfProxyNDPolicy1 specifies the first proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfProxyNDPolicy2 1.3.6.1.4.1.6527.3.1.2.3.38.1.3
The value of vRtrIfProxyNDPolicy2 specifies the second proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfProxyNDPolicy3 1.3.6.1.4.1.6527.3.1.2.3.38.1.4
The value of vRtrIfProxyNDPolicy3 specifies the third proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfProxyNDPolicy4 1.3.6.1.4.1.6527.3.1.2.3.38.1.5
The value of vRtrIfProxyNDPolicy4 specifies the fourth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfProxyNDPolicy5 1.3.6.1.4.1.6527.3.1.2.3.38.1.6
The value of vRtrIfProxyNDPolicy5 specifies the fifth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfDHCP6PfxDelegationLstChgd 1.3.6.1.4.1.6527.3.1.2.3.39
The value of the object vRtrIfDHCP6PfxDelegationLstChgd indicates the Timestamp of the last change to any row the vRtrIfDHCP6PfxDelegationTable
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfDHCP6PfxDelegationTable 1.3.6.1.4.1.6527.3.1.2.3.40
The table vRtrIfDHCP6PfxDelegationTable is used to configure the feature of automated delegation of IPv6 prefixes using DHCP6. This feature is intended for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the topology of the links in the network to which the prefixes will be assigned.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfDHCP6PfxDelegationEntry

vRtrIfDHCP6PfxDelegationEntry 1.3.6.1.4.1.6527.3.1.2.3.40.1
Each row entry represents a delegated IPv6 prefix. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing the vRtrRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfDHCP6PfxDelegationEntry  

vRtrIfDHCP6PfxdPrefix 1.3.6.1.4.1.6527.3.1.2.3.40.1.1
The value of the object vRtrIfDHCP6PfxdPrefix specifies, together with the object vRtrIfDHCP6PfxdPrefixLen the ipv6 prefix that will be delegated.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressIPv6  

vRtrIfDHCP6PfxdPrefixLen 1.3.6.1.4.1.6527.3.1.2.3.40.1.2
The value of the object vRtrIfDHCP6PfxdPrefixLen specifies, together with the object vRtrIfDHCP6PfxdPrefix the ipv6 prefix that will be delegated by this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrIfDHCP6PfxdRowStatus 1.3.6.1.4.1.6527.3.1.2.3.40.1.3
The value of the object vRtrIfDHCP6PfxdRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The only allowed values for this object are: active(1), createAndGo(4), and destroy(6).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrIfDHCP6PfxdLastChanged 1.3.6.1.4.1.6527.3.1.2.3.40.1.4
The value of vRtrIfDHCP6PfxdLastChanged indicates the sysUpTime when any object of the row is last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfDHCP6PfxdDUID 1.3.6.1.4.1.6527.3.1.2.3.40.1.6
The value of the object vRtrIfDHCP6PfxdDUID specifies the ID of the requesting router. If set to a non zero value the prefix defined in this row will only be delegated to this router. If set to zero, the prefix will be delegated to any requesting router.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

vRtrIfDHCP6PfxdIAID 1.3.6.1.4.1.6527.3.1.2.3.40.1.7
The value of the object vRtrIfDHCP6PfxdIAID specifies the IAID from the requesting router that needs to match in order to delegate the prefix defined in this row.If set to 0 no match on the received IAID is done.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

vRtrIfDHCP6PfxdPrefLifetime 1.3.6.1.4.1.6527.3.1.2.3.40.1.8
The value of the object vRtrIfDHCP6PfxdPrefLifetime specifies the time in seconds that this prefix remains preferred. The value of vRtrIfDHCP6PfxdPrefLifetime cannot be bigger then the value of vRtrIfDHCP6PfxdValidLifetime. The value 4294967295 is considered equal to infinity.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vRtrIfDHCP6PfxdValidLifetime 1.3.6.1.4.1.6527.3.1.2.3.40.1.9
The value of the object vRtrIfDHCP6PfxdValidLifetime specifies the time in seconds that the prefix is valid. The value 4294967295 is considered equal to infinity.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vRtrDHCP6DropStatTable 1.3.6.1.4.1.6527.3.1.2.3.41
The vRtrDHCP6DropStatTable has an entry for each virtual router configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrDHCP6DropStatEntry

vRtrDHCP6DropStatEntry 1.3.6.1.4.1.6527.3.1.2.3.41.1
Each row entry represents a collection of DHCP6 drop reason statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrDHCP6DropStatEntry  

vRtrDHCP6DropStatReason 1.3.6.1.4.1.6527.3.1.2.3.41.1.1
The object vRtrDHCP6DropStatReason indicates the drop reason for which the object vRtrDHCP6DropStatPktsDropped contains the counter. none srcOperDown Dhcp6 oper state is not Up on src itf dstOperDown Dhcp6 oper state is not Up on dst itf rlyReplyOnClientItf Relay Reply Msg on Client Itf hopCount Hop Count Limit reached badRelayedMsg Missing Relay Msg option, or illegal msg type clientItfNotFound Unable to determine destinatinon client Itf noMemory Out of Memory noGlobalPfx No global Pfx on Client Itf noSrcIp Unable to determine src Ip Addr noRteToServer No route to server subMgmtUpdFail Subscr. Mgmt. Update failed relayForw Received Relay Forw Message msgTooSmall Packet too small to contain valid dhcp6 msg msgNotForServer Server cannot respond to this message noServerId No Server Id option in msg from server noClientId No Client Id option in msg from client serverIdInClientMsg Server Id option in client msg wrongServerId Server DUID in client msg does not match ours illegalUnicast Client sent message to unicast while not allowed illegalSrcIp Client sent message with illegal src Ip pdMsgNotSupported Client message type not supported in pfx delegation nbrAddrsExceeded Nbr of addrs or pfxs exceeds allowed maximum in msg clientMacNotResolved Unable to resolve client's mac address illegalAssignedAddr The client was assigned an illegal address msgEncodingError Illegal pfx length in a IA_PREFIX option rcoMsgNotSupported Client message type not supported on rco interfaces iaInInfoRequest Info request holds IA options noIaInClientMsg Client msg holds no IA options noAddrInConfirmMsg No addresses in client confirm msg noRelayServers No relay servers configured hostLockout Blocked by host lockout noLinkAddress No link address available
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER none(0), srcOperDown(1), dstOperDown(2), rlyReplyOnClientItf(3), hopCount(4), badRelayedMsg(5), clientItfNotFound(6), noMemory(7), noGlobalPfx(8), noSrcIp(9), noRteToServer(10), subMgmtUpdFail(11), relayForw(12), msgTooSmall(13), msgNotForServer(14), noServerId(15), noClientId(16), serverIdInClientMsg(17), wrongServerId(18), illegalUnicast(19), illegalSrcIp(20), pdMsgNotSupported(21), nbrAddrsExceeded(22), clientMacNotResolved(23), illegalAssignedAddr(24), msgEncodingError(25), rcoMsgNotSupported(26), iaInInfoRequest(27), noIaInClientMsg(28), noAddrInConfirmMsg(29), noRelayServers(30), hostLockout(31), noLinkAddress(32)  

vRtrDHCP6DropStatLastCleared 1.3.6.1.4.1.6527.3.1.2.3.41.1.2
The value of vRtrDHCP6DropStatLastCleared indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrDHCP6DropStatPktsDropped 1.3.6.1.4.1.6527.3.1.2.3.41.1.3
The value of vRtrDHCP6DropStatPktsDropped indicates the number of DHCP6 packets were dropped for the reason described in vRtrDHCP6DropStatReason.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrDHCP6MsgStatTable 1.3.6.1.4.1.6527.3.1.2.3.42
The vRtrDHCP6MsgStatTable has an entry for each virtual router configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrDHCP6MsgStatEntry

vRtrDHCP6MsgStatEntry 1.3.6.1.4.1.6527.3.1.2.3.42.1
Each row entry represents a collection of counters for each DHCP6 message type for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrDHCP6MsgStatEntry  

vRtrDHCP6MsgStatsMsgType 1.3.6.1.4.1.6527.3.1.2.3.42.1.1
The object vRtrDHCP6MsgStatsMsgType indicates the DHCP6 message type for which statistics are kept on a per vrtr basis.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDHCP6MsgType  

vRtrDHCP6MsgStatsLstClrd 1.3.6.1.4.1.6527.3.1.2.3.42.1.2
The value of vRtrDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrDHCP6MsgStatsRcvd 1.3.6.1.4.1.6527.3.1.2.3.42.1.3
The value of vRtrDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrDHCP6MsgStatsSent 1.3.6.1.4.1.6527.3.1.2.3.42.1.4
The value of vRtrDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrDHCP6MsgStatsDropped 1.3.6.1.4.1.6527.3.1.2.3.42.1.5
The value of vRtrDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrIfIpcpTable 1.3.6.1.4.1.6527.3.1.2.3.43
The vRtrIfIpcpTable table contains the configuration for IPCP interface configuration on the vRtrIfEntry with the same indices.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfIpcpEntry

vRtrIfIpcpEntry 1.3.6.1.4.1.6527.3.1.2.3.43.1
Each row entry represents the IPCP configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfIpcpEntry  

vRtrIfIpcpPeerAddrType 1.3.6.1.4.1.6527.3.1.2.3.43.1.1
The value of vRtrIfIpcpPeerAddrType specifies the type of vRtrIfIpcpPeerAddr, the remote peer's IP address. vRtrIfIpcpPeerAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPeerAddrType is unknown, the value of vRtrIfIpcpPeerAddr is assumed to be of size 0.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrIfIpcpPeerAddr 1.3.6.1.4.1.6527.3.1.2.3.43.1.2
The value of vRtrIfIpcpPeerAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address. The type of this address is specified by the value of vRtrIfIpcpPeerAddrType vRtrIfIpcpPeerAddr can be set to on-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrIfIpcpPriDnsAddrType 1.3.6.1.4.1.6527.3.1.2.3.43.1.3
The value of vRtrIfIpcpPriDnsAddrType specifies the type of vRtrIfIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. vRtrIfIpcpPriDnsAddrType can be set ito non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPriDnsAddrType is unknown, the value of vRtrIfIpcpPriDnsAddr is assumed to be of size 0.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrIfIpcpPriDnsAddr 1.3.6.1.4.1.6527.3.1.2.3.43.1.4
The value of vRtrIfIpcpPriDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpPriDnsAddrType vRtrIfIpcpPriDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrIfIpcpSecDnsAddrType 1.3.6.1.4.1.6527.3.1.2.3.43.1.5
The value of vRtrIfIpcpSecDnsAddrType specifies the type of vRtrIfIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. vRtrIfIpcpSecDnsAddrType can be set to non-deffault only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpSecDnsAddrType is unknown, the value of vRtrIfIpcpSecDnsAddr is assumed to be of size 0.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrIfIpcpSecDnsAddr 1.3.6.1.4.1.6527.3.1.2.3.43.1.6
The value of vRtrIfIpcpSecDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpSecDnsAddrType. vRtrIfIpcpSecDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrInetStatRteCpeChkStatsTable 1.3.6.1.4.1.6527.3.1.2.3.44
The vRtrInetStatRteCpeChkStatsTable has an entry for each entry in the vRtrInetStaticRouteTable that has a non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInetStatRteCpeChkStatsEntry

vRtrInetStatRteCpeChkStatsEntry 1.3.6.1.4.1.6527.3.1.2.3.44.1
Each row entry represents a collection of Customer-Provided Equipment (CPE) availability statistics for a virtual router static route in the system with non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrInetStatRteCpeChkStatsEntry  

vRtrInetStatRteCpeChkUpTime 1.3.6.1.4.1.6527.3.1.2.3.44.1.1
The value of vRtrInetStatRteCpeChkUpTime indicates how long (in hundredths of a second) that the CPE has been available.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

vRtrInetStatRteCpeChkInPktCnt 1.3.6.1.4.1.6527.3.1.2.3.44.1.2
The value of vRtrInetStatRteCpeChkInPktCnt indicates the number of echo-reply packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrInetStatRteCpeChkOutPktCnt 1.3.6.1.4.1.6527.3.1.2.3.44.1.3
The value of vRtrInetStatRteCpeChkOutPktCnt indicates the number of echo-request packets sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrInetStatRteCpeChkDownTrans 1.3.6.1.4.1.6527.3.1.2.3.44.1.4
The value of vRtrInetStatRteCpeChkDownTrans indicates the number of times the CPE has transitioned to the unavailable state.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrInetStatRteCpeChkUpTrans 1.3.6.1.4.1.6527.3.1.2.3.44.1.5
The value of vRtrInetStatRteCpeChkUpTrans indicates the number of times the CPE has transitioned to the available state.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrInetStatRteCpeChkTTL 1.3.6.1.4.1.6527.3.1.2.3.44.1.6
The value of vRtrInetStatRteCpeChkTTL indicates the time, in seconds, before the CPE will be declared down. Upon receipt of an echo reply, it has the value of vRtrInetStaticRouteCpeInterval * vRtrInetStaticRouteCpeDropCnt and is decremented by 1 every second.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxDscpAppTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.45
The value of tmnxDscpAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDscpAppTable 1.3.6.1.4.1.6527.3.1.2.3.46
The tmnxDscpAppTable has an entry for each application to Differential Services Code Point (DSCP) mapping in a virtual routing context on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDscpAppEntry

tmnxDscpAppEntry 1.3.6.1.4.1.6527.3.1.2.3.46.1
Each row represents a mapping from an application to a DSCP value for particular virtual routing context. Entries are created at system initialization.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDscpAppEntry  

tmnxDscpAppId 1.3.6.1.4.1.6527.3.1.2.3.46.1.1
The value of tmnxDscpAppId indicates the DSCP application identifier for a protocol on the Alcatel-Lucent SROS router which generates control traffic over IP. The values of 'cflowd (2)', 'ptp (29)' and 'igmp-reporter (30)' are applicable to the transport Router context only (vRtrID = 1).
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPAppId  

tmnxDscpAppLastChanged 1.3.6.1.4.1.6527.3.1.2.3.46.1.2
The value of tmnxDscpAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDscpAppDscpValue 1.3.6.1.4.1.6527.3.1.2.3.46.1.3
The value of tmnxDscpAppDscpValue specifies a DSCP Value to assign to the traffic generated by the application specified by tmnxDscpAppId. A value of -1 specifies that no explicit DSCP re-marking will be done for the traffic generated by the application specified by tmnxDscpAppId. The default value is protocol specific.
Status: current Access: read-write
OBJECT-TYPE    
  TDSCPValueOrNone  

tmnxDscpFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.47
The value of tmnxDscpFCTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpFCTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDscpFCTable 1.3.6.1.4.1.6527.3.1.2.3.48
The tmnxDscpFCTable has an entry for each mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in a virtual routing context on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDscpFCEntry

tmnxDscpFCEntry 1.3.6.1.4.1.6527.3.1.2.3.48.1
Each row represents a mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in particular virtual routing context. Entries are created at system initialization.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDscpFCEntry  

tmnxDscpFCDscpValue 1.3.6.1.4.1.6527.3.1.2.3.48.1.1
The value of tmnxDscpFCDscpValue specifies a DSCP value which will be mapped to the Forwarding Class specified by tmnxDscpFCValue.
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPValue  

tmnxDscpFCLastChanged 1.3.6.1.4.1.6527.3.1.2.3.48.1.3
The value of tmnxDscpFCLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDscpFCValue 1.3.6.1.4.1.6527.3.1.2.3.48.1.4
The value of tmnxDscpFCValue specifies the Forwarding Class value for this mapping entry. The default value is best effort, which is specified by a value of 0.
Status: current Access: read-write
OBJECT-TYPE    
  TFCType  

tmnxDot1pAppTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.49
The value of tmnxDot1pAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDot1pAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDot1pAppTable 1.3.6.1.4.1.6527.3.1.2.3.50
The tmnxDot1pAppTable has an entry for each application to IEEE 802.1p priority (Dot1p) mapping in a virtual routing context on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxDot1pAppEntry

tmnxDot1pAppEntry 1.3.6.1.4.1.6527.3.1.2.3.50.1
Each row represents a mapping from an application to a Dot1p value for particular virtual routing context. Entries are created at system initialization.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxDot1pAppEntry  

tmnxDot1pAppId 1.3.6.1.4.1.6527.3.1.2.3.50.1.1
The value of tmnxDot1pAppId indicates the Dot1p application identifier for a Layer-2 protocol on the Alcatel-Lucent SROS router.
Status: current Access: not-accessible
OBJECT-TYPE    
  TDot1pAppId  

tmnxDot1pAppLastChanged 1.3.6.1.4.1.6527.3.1.2.3.50.1.2
The value of tmnxDot1pAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxDot1pAppValue 1.3.6.1.4.1.6527.3.1.2.3.50.1.3
The value of tmnxDot1pAppValue specifies a Dot1p value to assign to the traffic generated by the application specified by tmnxDot1pAppId. The default value is protocol specific.
Status: current Access: read-write
OBJECT-TYPE    
  Dot1PPriority  

vRtrFibStatTable 1.3.6.1.4.1.6527.3.1.2.3.51
The vRtrStatTable has an entry for IOM card configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrFibStatEntry

vRtrFibStatEntry 1.3.6.1.4.1.6527.3.1.2.3.51.1
Each row entry represents a collection of summarized statistics for each virtual router on an IOM card in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrFibStatEntry  

vRtrFibStatStaticRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.1
vRtrFibStatStaticRoutes indicates current static route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatDirectRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.2
vRtrFibStatDirectRoutes indicates current direct route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatHostRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.3
vRtrFibStatHostRoutes indicates current host route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatBGPRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.4
vRtrFibStatBGPRoutes indicates current BGP route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatBGPVpnRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.5
vRtrFibStatBGPVpnRoutes indicates current BGP VPN route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatOSPFRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.6
vRtrFibStatOSPFRoutes indicates current OSPF route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatISISRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.7
vRtrFibStatISISRoutes indicates current ISIS route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatRIPRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.8
vRtrFibStatRIPRoutes indicates current RIP route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatAggrRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.9
vRtrFibStatAggrRoutes indicates current aggregate route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatSubMgmtRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.10
vRtrFibStatSubMgmtRoutes indicates current Sub-management route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatManagedRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.11
vRtrFibStatManagedRoutes indicates current managed route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6StaticRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.12
vRtrFibStatV6StaticRoutes indicates current static route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6DirectRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.13
vRtrFibStatV6DirectRoutes indicates current direct route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6HostRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.14
vRtrFibStatV6HostRoutes indicates current host route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6BGPRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.15
vRtrFibStatV6BGPRoutes indicates current BGP route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6BGPVpnRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.16
vRtrFibStatV6BGPVpnRoutes indicates current BGP VPN route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6OSPFRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.17
vRtrFibStatV6OSPFRoutes indicates current OSPF route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6ISISRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.18
vRtrFibStatV6ISISRoutes indicates current ISIS route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6RIPRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.19
vRtrFibStatV6RIPRoutes indicates current RIP route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6AggrRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.20
vRtrFibStatV6AggrRoutes indicates current aggregate route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6SubMgmtRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.21
vRtrFibStatV6SubMgmtRoutes indicates current Sub-management route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6ManagedRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.22
vRtrFibStatV6ManagedRoutes indicates current managed route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatOverflows 1.3.6.1.4.1.6527.3.1.2.3.51.1.23
vRtrFibStatOverflows indicates the number of times the FIB has run out of space.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatAlarmCount 1.3.6.1.4.1.6527.3.1.2.3.51.1.24
vRtrFibStatAlarmCount indicates the number of times the FIB has raised an alarm due to high FIB usage.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatLastAlarmTime 1.3.6.1.4.1.6527.3.1.2.3.51.1.25
vRtrFibStatLastAlarmTime indicates the last time a high FIB usage alarm was raised.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrFibStatHighUtilization 1.3.6.1.4.1.6527.3.1.2.3.51.1.26
vRtrFibStatHighUtilization indicates whether or not the FIB on the IOM is experiences persistent high occupancy.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrFibStatMobileHostRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.27
The value of vRtrFibStatMobileHostRoutes indicates the current IPv4 Mobile Host route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6MobileHostRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.28
The value of vRtrFibStatV6MobileHostRoutes indicates the current IPv6 Mobile Host route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatVPNLeakRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.29
vRtrFibStatVPNLeakRoutes indicates current VPN Leak route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6VPNLeakRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.30
vRtrFibStatV6VPNLeakRoutes indicates current IPv6 VPN Leak route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatNatRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.33
vRtrFibStatNatRoutes indicates current NAT route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatV6NatRoutes 1.3.6.1.4.1.6527.3.1.2.3.51.1.34
vRtrFibStatV6NatRoutes indicates current NAT IPv6 route counts for the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatNextHopTable 1.3.6.1.4.1.6527.3.1.2.3.52
The vRtrFibStatNextHopTable has an entry for each IOM in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrFibStatNextHopEntry

vRtrFibStatNextHopEntry 1.3.6.1.4.1.6527.3.1.2.3.52.1
Each row entry represents a collection of statistics for an IOM card in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrFibStatNextHopEntry  

vRtrFibStatNextHopIPActive 1.3.6.1.4.1.6527.3.1.2.3.52.1.1
vRtrFibStatNextHopIPActive indicates current active IP next-hop counts for the FIB on the IOM.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatNextHopIPAvailable 1.3.6.1.4.1.6527.3.1.2.3.52.1.2
vRtrFibStatNextHopIPAvailable indicates the available IP next-hop counts for the FIB on the IOM.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatNextHopTunnelActive 1.3.6.1.4.1.6527.3.1.2.3.52.1.3
vRtrFibStatNextHopTunnelActive indicates current active Tunnel next-hop counts for the FIB on the IOM.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrFibStatNextHopTunnelAvailable 1.3.6.1.4.1.6527.3.1.2.3.52.1.4
vRtrFibStatNextHopTunnelAvailable indicates the available Tunnel next-hop counts for the FIB on the IOM.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrInetAllCidrRouteTable 1.3.6.1.4.1.6527.3.1.2.3.53
The vRtrInetAllCidrRouteTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB, by adding two indexes and displaying both active and inactive CIDR routes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInetAllCidrRouteEntry

vRtrInetAllCidrRouteEntry 1.3.6.1.4.1.6527.3.1.2.3.53.1
Each row entry in the vRtrInetAllCidrRouteTable represents an entry in the IP CIDR route table for the Alcatel-Lucent SROS series.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrInetAllCidrRouteEntry  

vRtrInetAllCidrRouteProtoID 1.3.6.1.4.1.6527.3.1.2.3.53.1.1
Additional table index provided to distinguish between multiple routes to same destination with the same inetCidrRouteProto index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrInetAllCidrRouteIfIndex 1.3.6.1.4.1.6527.3.1.2.3.53.1.2
The value of vRtrInetAllCidrRouteIfIndex indicates the ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

vRtrInetAllCidrRouteType 1.3.6.1.4.1.6527.3.1.2.3.53.1.3
The value of vRtrInetAllCidrRouteType indicates the type of route. Note that 'local' refers to a route for which the next hop is the final destination; 'remote' refers to a route for which the next hop is not the final destination. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. 'reject' refers to a route which, if matched, discards the message as unreachable and returns a notification (e.g. ICMP error) to the message sender. This is used in some protocols as a means of correctly aggregating routes. 'blackhole' refers to a route which, if matched, discards the message silently.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), reject(2), local(3), remote(4), blackhole(5)  

vRtrInetAllCidrRouteAge 1.3.6.1.4.1.6527.3.1.2.3.53.1.4
The value of vRtrInetAllCidrRouteAge indicates the number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrInetAllCidrRouteNextHopAS 1.3.6.1.4.1.6527.3.1.2.3.53.1.5
The value of vRtrInetAllCidrRouteNextHopAS indicates the Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's inetCidrRouteProto index. When this object is unknown or not relevant its value should be set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

vRtrInetAllCidrRouteMetric1 1.3.6.1.4.1.6527.3.1.2.3.53.1.6
The value of vRtrInetAllCidrRouteMetric1 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrInetAllCidrRouteMetric2 1.3.6.1.4.1.6527.3.1.2.3.53.1.7
The value of vRtrInetAllCidrRouteMetric2 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrInetAllCidrRouteMetric3 1.3.6.1.4.1.6527.3.1.2.3.53.1.8
The value of vRtrInetAllCidrRouteMetric3 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrInetAllCidrRouteMetric4 1.3.6.1.4.1.6527.3.1.2.3.53.1.9
The value of vRtrInetAllCidrRouteMetric4 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrInetAllCidrRouteMetric5 1.3.6.1.4.1.6527.3.1.2.3.53.1.10
The value of vRtrInetAllCidrRouteMetric5 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vRtrInetAllCidrRoutePreference 1.3.6.1.4.1.6527.3.1.2.3.53.1.11
The value of vRtrInetAllCidrRoutePreference indicates the priority of this static route versus the routes from different sources such as BGP or OSPF etc, when ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

vRtrInetAllCidrRouteMetric 1.3.6.1.4.1.6527.3.1.2.3.53.1.12
The value of vRtrInetAllCidrRouteMetric indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrInetAllCidrRouteIfVRtrId 1.3.6.1.4.1.6527.3.1.2.3.53.1.13
The value of vRtrInetAllCidrRouteIfVRtrId indicates the virtual router instance of the egress interface defined by vRtrInetAllCidrRouteIfIndex. This object is valid only for subscriber management routes. For all other route types, this object will have a value of zero.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxVRtrIDOrZero  

vRtrInetAllCidrRouteIsActive 1.3.6.1.4.1.6527.3.1.2.3.53.1.14
The value of vRtrInetAllCidrRouteIsActive indicates whether the this route is the active route for this destination in the IP CIDR route table.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrInetAllCidrRouteBkupFlags 1.3.6.1.4.1.6527.3.1.2.3.53.1.15
The value of vRtrInetAllCidrRouteBkupFlags indicates the presence or absence of LFA next-hops and backup routes. 'none' indicates that no next-hop is present. 'hasLfa' indicates that an LFA next-hop is present in addition to the regular next-hop. 'hasBackup' indicates that this route has a backup route. 'isBackup' indicates that this route is a backup route to another route with the same prefix.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), hasLfa(1), hasBackup(2), isBackup(3)  

vRtrInetAllCidrRouteBkupNHopType 1.3.6.1.4.1.6527.3.1.2.3.53.1.16
The value of vRtrInetAllCidrRouteBkupNHopType indicates the IP address type of vRtrInetAllCidrRouteBkupNextHop. The value of vRtrInetAllCidrRouteBkupNHopType is only valid when vRtrInetAllCidrRouteBkupFlags has a value of 'hasLfa'.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrInetAllCidrRouteBkupNextHop 1.3.6.1.4.1.6527.3.1.2.3.53.1.17
The value of vRtrInetAllCidrRouteBkupNextHop indicates the IP address of a backup next-hop. The value of vRtrInetAllCidrRouteBkupNextHop is only valid when vRtrInetAllCidrRouteBkupFlags has a value of 'hasLfa'.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

vRtrInetAllCidrRouteBkupMetric 1.3.6.1.4.1.6527.3.1.2.3.53.1.18
The value of vRtrInetAllCidrRouteBkupMetric indicates the routing metric for a backup route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. The value of vRtrInetAllCidrRouteBkupMetric is only valid when vRtrInetAllCidrRouteBkupFlags has a value of 'hasLfa'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrInetAllCidrRouteNHopRepCount 1.3.6.1.4.1.6527.3.1.2.3.53.1.19
The value of vRtrInetAllCidrRouteNHopRepCount indicates the number of times the next-hop repeats for a particular route.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrInetAllCidrRtNextHopType 1.3.6.1.4.1.6527.3.1.2.3.53.1.20
The value of vRtrInetAllCidrRtNextHopType indicates the type of next hop for this route.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetCidrNextHopType  

vRtrInetAllCidrRtNextHopOwner 1.3.6.1.4.1.6527.3.1.2.3.53.1.21
The value of vRtrInetAllCidrRtNextHopOwner indicates the owner of next hop for this route.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetCidrNextHopOwner  

vRtrInetAllCidrRtNHOwnerAuxInfo 1.3.6.1.4.1.6527.3.1.2.3.53.1.22
The value of vRtrInetAllCidrRtNHOwnerAuxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetAllCidrRtNextHopOwner. The value of vRtrInetAllCidrRtNHOwnerAuxInfo indicates the tunnel-id existing for this next hop type and owner.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrInetAllCidrRtBkupNHType 1.3.6.1.4.1.6527.3.1.2.3.53.1.23
The value of vRtrInetAllCidrRtBkupNHType indicates the type of next hop for this backup route.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetCidrNextHopType  

vRtrInetAllCidrRtBkupNHOwner 1.3.6.1.4.1.6527.3.1.2.3.53.1.24
The value of vRtrInetAllCidrRtBkupNHOwner indicates the owner of next hop for this backup route.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxInetCidrNextHopOwner  

vRtrInetAllCidrRtBkupNHOwnAxInfo 1.3.6.1.4.1.6527.3.1.2.3.53.1.25
The value of vRtrInetAllCidrRtBkupNHOwnAxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetAllCidrRtBkupNHOwner. The value of vRtrInetAllCidrRtBkupNHOwnAxInfo indicates the tunnel-id existing for this backup next hop type and owner.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfStatsTable 1.3.6.1.4.1.6527.3.1.2.3.54
The vRtrIfStatsTable table contains statistics per virtual router interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfStatsEntry

vRtrIfStatsEntry 1.3.6.1.4.1.6527.3.1.2.3.54.1
Each row entry represents the statistics per virtual router interface. Entries are created and deleted when entries in the vRtrIfEntry are created and deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfStatsEntry  

vRtrIfuRPFCheckFailPkts 1.3.6.1.4.1.6527.3.1.2.3.54.1.1
The value of vRtrIfuRPFCheckFailPkts indicates the number of packets that fail uRPF check on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfuRPFCheckFailPktsLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.2
The value of vRtrIfuRPFCheckFailPktsLow32 indicates the lower 32 bits of the value of vRtrIfuRPFCheckFailPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfuRPFCheckFailPktsHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.3
The value of vRtrIfuRPFCheckFailPktsHigh32 indicates the high 32 bits of the value of vRtrIfuRPFCheckFailPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfuRPFCheckFailBytes 1.3.6.1.4.1.6527.3.1.2.3.54.1.4
The value of vRtrIfuRPFCheckFailBytes indicates the number of bytes in the packets that fail uRPF check.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfuRPFCheckFailBytesLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.5
The value of vRtrIfuRPFCheckFailBytesLow32 indicates the lower 32 bits of the value of vRtrIfuRPFCheckFailBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfuRPFCheckFailBytesHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.6
The value of vRtrIfuRPFCheckFailBytesHigh32 indicates the high 32 bits of the value of vRtrIfuRPFCheckFailBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragPktsRcvd 1.3.6.1.4.1.6527.3.1.2.3.54.1.7
The value of vRtrIfIpReasFragPktsRcvd indicates the number of fragmented packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasFragPktsRcvdLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.8
The value of vRtrIfIpReasFragPktsRcvdLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragPktsRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragPktsRcvdHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.9
The value of vRtrIfIpReasFragPktsRcvdHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragPktsRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragBytesRcvd 1.3.6.1.4.1.6527.3.1.2.3.54.1.10
The value of vRtrIfIpReasFragBytesRcvd indicates the number of fragmented bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasFragBytesRcvdLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.11
The value of vRtrIfIpReasFragBytesRcvdLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragBytesRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragBytesRcvdHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.12
The value of vRtrIfIpReasFragBytesRcvdHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragBytesRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragPktsReas 1.3.6.1.4.1.6527.3.1.2.3.54.1.13
The value of vRtrIfIpReasFragPktsReas indicates the number of fragmented packets reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasFragPktsReasLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.14
The value of vRtrIfIpReasFragPktsReasLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragPktsReas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragPktsReasHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.15
The value of vRtrIfIpReasFragPktsReasHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragPktsRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragBytesReas 1.3.6.1.4.1.6527.3.1.2.3.54.1.16
The value of vRtrIfIpReasFragBytesReas indicates the number of fragmented bytes reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasFragBytesReasLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.17
The value of vRtrIfIpReasFragBytesReasLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragBytesReas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragBytesReasHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.18
The value of vRtrIfIpReasFragBytesReasHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragBytesReas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragReasErrors 1.3.6.1.4.1.6527.3.1.2.3.54.1.19
The value of vRtrIfIpReasFragReasErrors indicates the number of reassembly errors occured on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasFragReasErrorsLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.20
The value of vRtrIfIpReasFragReasErrorsLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragReasErrors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragReasErrorsHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.21
The value of vRtrIfIpReasFragReasErrorsHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragReasErrors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragDisc 1.3.6.1.4.1.6527.3.1.2.3.54.1.22
The value of vRtrIfIpReasFragDisc indicates the number of packets reassembly discarded due to the timeout on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasFragDiscLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.23
The value of vRtrIfIpReasFragDiscLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragDisc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasFragDiscHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.24
The value of vRtrIfIpReasFragDiscHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragDisc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasOutBufRes 1.3.6.1.4.1.6527.3.1.2.3.54.1.25
The value of vRtrIfIpReasOutBufRes indicates the number of times out of buffer resources happend while reassembly on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasOutBufResLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.26
The value of vRtrIfIpReasOutBufResLow32 indicates the lower 32 bits of the value of vRtrIfIpReasOutBufRes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasOutBufResHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.27
The value of vRtrIfIpReasOutBufResHigh32 indicates the high 32 bits of the value of vRtrIfIpReasOutBufRes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasPktsRx 1.3.6.1.4.1.6527.3.1.2.3.54.1.28
The value of vRtrIfIpReasPktsRx indicates the number of total packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasPktsRxLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.29
The value of vRtrIfIpReasPktsRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasPktsRx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasPktsRxHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.30
The value of vRtrIfIpReasPktsRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasPktsRx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasBytesRx 1.3.6.1.4.1.6527.3.1.2.3.54.1.31
The value of vRtrIfIpReasBytesRx indicates the number of total bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasBytesRxLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.32
The value of vRtrIfIpReasBytesRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasBytesRx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasBytesRxHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.33
The value of vRtrIfIpReasBytesRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasBytesRx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasPktsTx 1.3.6.1.4.1.6527.3.1.2.3.54.1.34
The value of vRtrIfIpReasPktsTx indicates the number of total packets sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasPktsTxLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.35
The value of vRtrIfIpReasPktsTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasPktsTx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasPktsTxHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.36
The value of vRtrIfIpReasPktsTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasPktsTx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasBytesTx 1.3.6.1.4.1.6527.3.1.2.3.54.1.37
The value of vRtrIfIpReasBytesTx indicates the number of total bytes sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasBytesTxLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.38
The value of vRtrIfIpReasBytesTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasBytesTx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasBytesTxHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.39
The value of vRtrIfIpReasBytesTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasBytesTx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfRxPkts 1.3.6.1.4.1.6527.3.1.2.3.54.1.40
The value of vRtrIfRxPkts indicates the number of total packets received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfRxPktsLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.41
The value of vRtrIfRxPktsLow32 indicates the lower 32 bits of the value of vRtrIfRxPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfRxPktsHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.42
The value of vRtrIfRxPktsHigh32 indicates the high 32 bits of the value of vRtrIfRxPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfRxBytes 1.3.6.1.4.1.6527.3.1.2.3.54.1.43
The value of vRtrIfRxBytes indicates the number of total bytes received by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfRxBytesLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.44
The value of vRtrIfRxBytesLow32 indicates the lower 32 bits of the value of vRtrIfRxBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfRxBytesHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.45
The value of vRtrIfRxBytesHigh32 indicates the high 32 bits of the value of vRtrIfRxBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV4Pkts 1.3.6.1.4.1.6527.3.1.2.3.54.1.46
The value of vRtrIfTxV4Pkts indicates the number of total IPv4 packets sent from this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxV4PktsLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.47
The value of vRtrIfTxV4PktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV4Pkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV4PktsHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.48
The value of vRtrIfTxV4PktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV4Pkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV4Bytes 1.3.6.1.4.1.6527.3.1.2.3.54.1.49
The value of vRtrIfTxV4Bytes indicates the number of total IPv4 bytes sent from this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxV4BytesLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.50
The value of vRtrIfTxV4BytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV4Bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV4BytesHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.51
The value of vRtrIfTxV4BytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV4Bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV6Pkts 1.3.6.1.4.1.6527.3.1.2.3.54.1.52
The value of vRtrIfTxV6Pkts indicates the number of total IPv6 packets sent from this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxV6PktsLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.53
The value of vRtrIfTxV6PktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV6Pkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV6PktsHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.54
The value of vRtrIfTxV6PktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV6Pkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV6Bytes 1.3.6.1.4.1.6527.3.1.2.3.54.1.55
The value of vRtrIfTxV6Bytes indicates the number of total IPv6 bytes sent from this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxV6BytesLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.56
The value of vRtrIfTxV6BytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV6Bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV6BytesHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.57
The value of vRtrIfTxV6BytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV6Bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV4DiscardPkts 1.3.6.1.4.1.6527.3.1.2.3.54.1.58
The value of vRtrIfTxV4DiscardPkts indicates the number of total IPv4 transmit packets discarded by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxV4DiscardPktsLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.59
The value of vRtrIfTxV4DiscardPktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV4DiscardPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV4DiscardPktsHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.60
The value of vRtrIfTxV4DiscardPktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV4DiscardPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV4DiscardBytes 1.3.6.1.4.1.6527.3.1.2.3.54.1.61
The value of vRtrIfTxV4DiscardBytes indicates the number of total IPv4 transmit bytes discarded by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxV4DiscardBytesLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.62
The value of vRtrIfTxV4DiscardBytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV4DiscardBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV4DiscardBytesHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.63
The value of vRtrIfTxV4DiscardBytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV4DiscardBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV6DiscardPkts 1.3.6.1.4.1.6527.3.1.2.3.54.1.64
The value of vRtrIfTxV6DiscardPkts indicates the number of total IPv6 transmit packets discarded by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxV6DiscardPktsLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.65
The value of vRtrIfTxV6DiscardPktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV6DiscardPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV6DiscardPktsHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.66
The value of vRtrIfTxV6DiscardPktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV6DiscardPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV6DiscardBytes 1.3.6.1.4.1.6527.3.1.2.3.54.1.67
The value of vRtrIfTxV6DiscardBytes indicates the number of total IPv6 transmit bytes discarded by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxV6DiscardBytesLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.68
The value of vRtrIfTxV6DiscardBytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV6DiscardBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxV6DiscardBytesHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.69
The value of vRtrIfTxV6DiscardBytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV6DiscardBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragPktsRcvd 1.3.6.1.4.1.6527.3.1.2.3.54.1.70
The value of vRtrIfIpReasV6FragPktsRcvd indicates the number of IPv6 fragmented packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6FragPktsRcvdLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.71
The value of vRtrIfIpReasV6FragPktsRcvdLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragPktsRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragPktsRcvdHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.72
The value of vRtrIfIpReasV6FragPktsRcvdHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragPktsRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragBytesRcvd 1.3.6.1.4.1.6527.3.1.2.3.54.1.73
The value of vRtrIfIpReasV6FragBytesRcvd indicates the number of IPv6 fragmented bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6FragBytesRcvdL32 1.3.6.1.4.1.6527.3.1.2.3.54.1.74
The value of vRtrIfIpReasV6FragBytesRcvdL32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragBytesRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragBytesRcvdH32 1.3.6.1.4.1.6527.3.1.2.3.54.1.75
The value of vRtrIfIpReasV6FragBytesRcvdH32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragBytesRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragPktsReas 1.3.6.1.4.1.6527.3.1.2.3.54.1.76
The value of vRtrIfIpReasV6FragPktsReas indicates the number of IPv6 fragmented packets reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6FragPktsReasLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.77
The value of vRtrIfIpReasV6FragPktsReasLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragPktsReas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragPktsReasHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.78
The value of vRtrIfIpReasV6FragPktsReasHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragPktsRcvd.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragBytesReas 1.3.6.1.4.1.6527.3.1.2.3.54.1.79
The value of vRtrIfIpReasV6FragBytesReas indicates the number of IPv6 fragmented bytes reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6FragBytesReasL32 1.3.6.1.4.1.6527.3.1.2.3.54.1.80
The value of vRtrIfIpReasV6FragBytesReasL32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragBytesReas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragBytesReasH32 1.3.6.1.4.1.6527.3.1.2.3.54.1.81
The value of vRtrIfIpReasV6FragBytesReasH32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragBytesReas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragReasErrors 1.3.6.1.4.1.6527.3.1.2.3.54.1.82
The value of vRtrIfIpReasV6FragReasErrors indicates the number of IPv6 reassembly errors occured on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6FragReasErrorsL32 1.3.6.1.4.1.6527.3.1.2.3.54.1.83
The value of vRtrIfIpReasV6FragReasErrorsL32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragReasErrors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragReasErrorsH32 1.3.6.1.4.1.6527.3.1.2.3.54.1.84
The value of vRtrIfIpReasV6FragReasErrorsH32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragReasErrors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragDisc 1.3.6.1.4.1.6527.3.1.2.3.54.1.85
The value of vRtrIfIpReasV6FragDisc indicates the number of IPv6 packets reassembly discarded due to the timeout on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6FragDiscLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.86
The value of vRtrIfIpReasV6FragDiscLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragDisc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6FragDiscHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.87
The value of vRtrIfIpReasV6FragDiscHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragDisc.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6OutBufRes 1.3.6.1.4.1.6527.3.1.2.3.54.1.88
The value of vRtrIfIpReasV6OutBufRes indicates the number of times out of buffer resources happend while IPv6 reassembly on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6OutBufResLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.89
The value of vRtrIfIpReasV6OutBufResLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6OutBufRes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6OutBufResHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.90
The value of vRtrIfIpReasV6OutBufResHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6OutBufRes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6PktsRx 1.3.6.1.4.1.6527.3.1.2.3.54.1.91
The value of vRtrIfIpReasV6PktsRx indicates the number of total IPv6 packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6PktsRxLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.92
The value of vRtrIfIpReasV6PktsRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6PktsRx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6PktsRxHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.93
The value of vRtrIfIpReasV6PktsRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6PktsRx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6BytesRx 1.3.6.1.4.1.6527.3.1.2.3.54.1.94
The value of vRtrIfIpReasV6BytesRx indicates the number of total IPv6 bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6BytesRxLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.95
The value of vRtrIfIpReasV6BytesRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6BytesRx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6BytesRxHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.96
The value of vRtrIfIpReasV6BytesRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6BytesRx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6PktsTx 1.3.6.1.4.1.6527.3.1.2.3.54.1.97
The value of vRtrIfIpReasV6PktsTx indicates the number of total IPv6 packets sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6PktsTxLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.98
The value of vRtrIfIpReasV6PktsTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6PktsTx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6PktsTxHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.99
The value of vRtrIfIpReasV6PktsTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6PktsTx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6BytesTx 1.3.6.1.4.1.6527.3.1.2.3.54.1.100
The value of vRtrIfIpReasV6BytesTx indicates the number of total IPv6 bytes sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfIpReasV6BytesTxLow32 1.3.6.1.4.1.6527.3.1.2.3.54.1.101
The value of vRtrIfIpReasV6BytesTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6BytesTx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfIpReasV6BytesTxHigh32 1.3.6.1.4.1.6527.3.1.2.3.54.1.102
The value of vRtrIfIpReasV6BytesTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6BytesTx.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfSpeed 1.3.6.1.4.1.6527.3.1.2.3.54.1.103
The value of vRtrIfSpeed indicates an estimate of the current bandwidth in bits per second for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIpPoolTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.69.1
The value of vRtrIpPoolTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrIpPoolTable by adding, deleting an entry or change to a writable object in the table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIpPoolTable 1.3.6.1.4.1.6527.3.1.2.3.69.2
The vRtrIpPoolTable has an entry for each IP address pool configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIpPoolEntry

vRtrIpPoolEntry 1.3.6.1.4.1.6527.3.1.2.3.69.2.1
Each row entry represents an IP address pool configured in the system. Entries can be created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIpPoolEntry  

vRtrIpPoolName 1.3.6.1.4.1.6527.3.1.2.3.69.2.1.1
The value of vRtrIpPoolName specifies the name of this IP address pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

vRtrIpPoolRowStatus 1.3.6.1.4.1.6527.3.1.2.3.69.2.1.2
The value of the object vRtrIpPoolRowStatus specifies the row status of this entry. This object is used to create or delete rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrIpPoolLastChanged 1.3.6.1.4.1.6527.3.1.2.3.69.2.1.3
The value of vRtrIpPoolLastChanged indicates the timestamp of the last change to this row in vRtrIpPoolTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIpPoolDescription 1.3.6.1.4.1.6527.3.1.2.3.69.2.1.4
The value of vRtrIpPoolDescription specifies the description string for this IP address pool. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

vRtrIpPoolExclusive 1.3.6.1.4.1.6527.3.1.2.3.69.2.1.5
The value of the object vRtrIpPoolExclusive specifies if this IP address pool will be used exclusively by an Access Point Name (APN) or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIpPoolAddressHoldTimer 1.3.6.1.4.1.6527.3.1.2.3.69.2.1.6
The value of the object vRtrIpPoolAddressHoldTimer specifies the amount of time, in minutes, a newly released IP address is held before being made available for reassignment.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10  

vRtrIpPoolSuppress0and255 1.3.6.1.4.1.6527.3.1.2.3.69.2.1.7
The value of the object vRtrIpPoolSuppress0and255 specifies if allocation of all .0 and .255 IP addresses from the local IP pool to mobile subscribers are suppressed. By default the Packet Data Network Gateway (PGW) supports allocating .0 and .255 IP address to mobile subscribers except for the first .0 and last .255 IP address in the IP Pool.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIpPoolAddrTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.69.3
The value of vRtrIpPoolAddrTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrIpPoolAddrTable by adding, deleting an entry or change to a writable object in the table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIpPoolAddrTable 1.3.6.1.4.1.6527.3.1.2.3.69.4
The vRtrIpPoolAddrTable has an entry for each IP prefix configured in an IP pool in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIpPoolAddrEntry

vRtrIpPoolAddrEntry 1.3.6.1.4.1.6527.3.1.2.3.69.4.1
Each row entry represents an IP prefix configured in an IP pool in the system. Entries can be created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIpPoolAddrEntry  

vRtrIpPoolAddrType 1.3.6.1.4.1.6527.3.1.2.3.69.4.1.1
The value of vRtrIpPoolAddrType specifies the type of the address represented by vRtrIpPoolAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrIpPoolAddr 1.3.6.1.4.1.6527.3.1.2.3.69.4.1.2
The value of vRtrIpPoolAddr specifies the prefix of the IP address being added to the IP pool.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrIpPoolAddrPrefixLen 1.3.6.1.4.1.6527.3.1.2.3.69.4.1.3
The value of vRtrIpPoolAddrPrefixLen specifies the length of the IP netmask for this IP address. The range of this object is 9..32 if the value of vRtrIpPoolAddrType is set to 'ipv4'. The range of this object is as follows if the value of vRtrIpPoolAddrType is set to 'ipv6'. - The range of vRtrIpPoolAddrPrefixLen is 41..56, if the value of vRtrIpPoolAddrIpv6AssignedLen is set to 64. - The range of vRtrIpPoolAddrPrefixLen is 33..48, if the value of vRtrIpPoolAddrIpv6AssignedLen is set to 56. - The range of vRtrIpPoolAddrPrefixLen is 25..40, if the value of vRtrIpPoolAddrIpv6AssignedLen is set to 48.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrIpPoolAddrRowStatus 1.3.6.1.4.1.6527.3.1.2.3.69.4.1.4
The value of the object vRtrIpPoolAddrRowStatus specifies the row status of this entry. This object is used to create or delete rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrIpPoolAddrLastChanged 1.3.6.1.4.1.6527.3.1.2.3.69.4.1.5
The value of vRtrIpPoolAddrLastChanged indicates the timestamp of the last change to this row in vRtrIpPoolAddrTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIpPoolAddrBlock 1.3.6.1.4.1.6527.3.1.2.3.69.4.1.6
The value of the object vRtrIpPoolAddrBlock specifies if the reassignment of the released IP address will be allowed or not. If the value of this object is set to 'true', then the reassignment of the released IP address will be blocked. This will be used to move the block of IP pools from one Packet Data Network Gateway (PGW) to another PGW.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIpPoolAddrIpv6AssignedLen 1.3.6.1.4.1.6527.3.1.2.3.69.4.1.7
The value of the object vRtrIpPoolAddrIpv6AssignedLen specifies the the prefix length which is used for assigning IP address to User Equipment (UE). The value of this object can be set only if the value of vRtrIpPoolAddrType is set to 'ipv6'. The value of this object can be set to 48, 56 and 64.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 48..64  

vRtrIpPoolStatTable 1.3.6.1.4.1.6527.3.1.2.3.69.5
The vRtrIpPoolStatTable has an entry for each IP prefix configured in an IP pool in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIpPoolStatEntry

vRtrIpPoolStatEntry 1.3.6.1.4.1.6527.3.1.2.3.69.5.1
Each row entry represents the statistics for an IP prefix configured in an IP pool in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIpPoolStatEntry  

vRtrIpPoolStatAllocated 1.3.6.1.4.1.6527.3.1.2.3.69.5.1.1
The value of the object vRtrIpPoolStatAllocated indicates the number of IP Addresses used.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrIpPoolStatFree 1.3.6.1.4.1.6527.3.1.2.3.69.5.1.2
The value of the object vRtrIpPoolStatFree indicates the number of free IP Addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrIpPoolStatHeld 1.3.6.1.4.1.6527.3.1.2.3.69.5.1.3
The value of the object vRtrIpPoolStatHeld indicates the number of IP Addresses held.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrNetDomainTblLastChanged 1.3.6.1.4.1.6527.3.1.2.3.55
The value of vRtrNetDomainTblLastChanged indicates the sysUpTime at the time of the last modification of vRtrNetDomainTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrNetDomainTable 1.3.6.1.4.1.6527.3.1.2.3.56
The vRtrNetDomainTable table contains network-domains which can be then associated with individual interfaces and SDPs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrNetDomainEntry

vRtrNetDomainEntry 1.3.6.1.4.1.6527.3.1.2.3.56.1
Each row entry represents the network-domains per virtual router interface. There will always be at least one row entry in this table which represents the 'default' network-doamin. This entry is created when the system is initialized and can never be deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrNetDomainEntry  

vRtrNetDomainName 1.3.6.1.4.1.6527.3.1.2.3.56.1.1
The value of vRtrNetDomainName specifies the network-domain name configured on this virtual router. There will always be at least one network-domain entry defined by the agent with value 'default' which represents the default network-domain.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

vRtrNetDomainRowStatus 1.3.6.1.4.1.6527.3.1.2.3.56.1.2
The value of the object vRtrNetDomainRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrNetDomainLastChanged 1.3.6.1.4.1.6527.3.1.2.3.56.1.3
The value of vRtrNetDomainLastChanged indicates the sysUpTime when any object of the row is last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrNetDomainDesc 1.3.6.1.4.1.6527.3.1.2.3.56.1.4
The value of vRtrNetDomainDesc is a user provided description string for this network-domain. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

vRtrNetDomainIfAssociationCnt 1.3.6.1.4.1.6527.3.1.2.3.56.1.5
The value of vRtrNetDomainIfAssociationCnt indicates the number of network interfaces associated with this network-domain.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrNetDomainSdpAssociationCnt 1.3.6.1.4.1.6527.3.1.2.3.56.1.6
The value of vRtrNetDomainSdpAssociationCnt indicates the number of SDPs associated with this network-domain.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrIfNetDomainTblLastChanged 1.3.6.1.4.1.6527.3.1.2.3.57
The value of vRtrIfNetDomainTblLastChanged indicates the sysUpTime at the time of the last modification of vRtrIfNetDomainTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfNetDomainTable 1.3.6.1.4.1.6527.3.1.2.3.58
The vRtrIfNetDomainTable provides an extension to the vRtrIfTable. It has an entry for each network domain associated with virtual router interface configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfNetDomainEntry

vRtrIfNetDomainEntry 1.3.6.1.4.1.6527.3.1.2.3.58.1
Each row entry represents information related to network-domain for a virtual router interface in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfNetDomainEntry  

vRtrIfNetDomainRowStatus 1.3.6.1.4.1.6527.3.1.2.3.58.1.1
The value of the object vRtrNetDomainRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrIfNetDomainLastChanged 1.3.6.1.4.1.6527.3.1.2.3.58.1.2
The value of vRtrNetDomainLastChanged indicates the sysUpTime when any object of the row is last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrConfExtTable 1.3.6.1.4.1.6527.3.1.2.3.60
The vRtrConfExtTable provides an extension of the vRtrConfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrConfExtEntry

vRtrConfExtEntry 1.3.6.1.4.1.6527.3.1.2.3.60.1
Each row entry in the vRtrConfExtTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the router configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrConfExtEntry  

vRtrLdpShortcut 1.3.6.1.4.1.6527.3.1.2.3.60.1.1
The value of vRtrLdpShortcut specifies if IP packets are being forwarded using LDP shortcuts over all network interfaces in the system which participate in the IS-IS and OSPF routing protocols.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrSingleSfmOverloadAdminState 1.3.6.1.4.1.6527.3.1.2.3.60.1.2
The value of the object vRtrSingleSfmOverloadAdminState specifies the administrative state of the IGP single-SFM-overload behavior in this virtual router instance. When the value of vRtrSingleSfmOverloadAdminState is equal to 'inService', IGP protocols (either IS-IS or OSPF) enter an overload state when the node only has a single SFM functioning.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrSingleSfmOverloadHldOffTime 1.3.6.1.4.1.6527.3.1.2.3.60.1.3
The value of the object vRtrSingleSfmOverloadHldOffTime specifies the delay between the detection of the single-SFM condition and the IGP entering the overload state.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..600  

vRtrSingleSfmOverloadState 1.3.6.1.4.1.6527.3.1.2.3.60.1.4
The value of the object vRtrSingleSfmOverloadState indicates the IGP single-SFM-overload state.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxVrtrSingleSfmOverloadState  

vRtrSingleSfmOverloadStart 1.3.6.1.4.1.6527.3.1.2.3.60.1.5
The value of vRtrSingleSfmOverloadStart indicates the sysUpTime the last time that the vRtrSingleSfmOverloadState had a transition from 'notApplicable' or 'normal' to 'overload'. If such a transition never occurred, this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrSingleSfmOverloadTime 1.3.6.1.4.1.6527.3.1.2.3.60.1.6
The value of vRtrSingleSfmOverloadTime indicates the duration of the most recent overload.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

vRtrGrtState 1.3.6.1.4.1.6527.3.1.2.3.60.1.7
The value of vRtrGrtState specifies if a route lookup is done in the Global Route Table (GRT) when the lookup in the local VRF fails. When the value of this object is set to 'false', route lookup in the GRT is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrMvpnIpmsiP2MPAdmin 1.3.6.1.4.1.6527.3.1.2.3.60.1.8
The value of vRtrMvpnIpmsiP2MPAdmin specifies the current administrative state of P2MP for the inclusive provider tunnel. An 'inconsistentValue' error is returned if this object is set to non-default value when vRtrMvpnIpmsiLspTemplate is set to its default value.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrMvpnSpmsiP2MPAdmin 1.3.6.1.4.1.6527.3.1.2.3.60.1.9
The value of vRtrMvpnSpmsiP2MPAdmin specifies the current administrative state of P2MP for the selective provider tunnel. An 'inconsistentValue' error is returned if this object is set to non-default value when vRtrMvpnSpmsiLspTemplate is set to its default value.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

vRtrMvpnIpmsiLspTemplate 1.3.6.1.4.1.6527.3.1.2.3.60.1.10
The value of the vRtrMvpnIpmsiLspTemplate specifies the name of the template whose parameters configured in TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable are signalled to the automatically created P2MP LSP for the inclusive provider tunnel. If a corresponding index does not exist in TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable, an 'inconsistentValue' error will be returned. An inconsistentValue' error is returned if this object is set to non-default value when vRtrMvpnIpmsiP2MPAdmin is set to its non-default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrMvpnSpmsiLspTemplate 1.3.6.1.4.1.6527.3.1.2.3.60.1.11
The value of the vRtrMvpnSpmsiLspTemplate specifies the name of the template whose paramters configured in TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable are signalled to the automatically created P2MP LSP for the selective provider tunnel. If a corresponding index does not exist in TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable, an 'inconsistentValue' error will be returned. An inconsistentValue' error is returned if this object is set to non-default value when vRtrMvpnSpmsiP2MPAdmin is set to its non-default value.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrMvpnIpmsiType 1.3.6.1.4.1.6527.3.1.2.3.60.1.12
The value of vRtrMvpnIpmsiType specifies the type of the inclusive provider tunnel. When the value of vRtrMvpnIpmsiType is set to 'rsvp', the inclusive provider tunnel is used for RSVP. When the value is set to 'pim', the inclusive provider tunnel is used for PIM. When the value is set to 'ldp', the inclusive provider tunnel is used for LDP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), rsvp(1), pim(2), ldp(3)  

vRtrMvpnSpmsiType 1.3.6.1.4.1.6527.3.1.2.3.60.1.13
The value of vRtrMvpnSpmsiType specifies the type of the selective provider tunnel. When the value of vRtrMvpnSpmsiType is set to 'rsvp', the selective provider tunnel is used for RSVP. When the value is set to 'pim', the selective provider tunnel is used for PIM. When the value is set to 'ldp', the selective provider tunnel is used for LDP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), rsvp(1), pim(2), ldp(3)  

vRtrMvpnSpmsiMaxLimit 1.3.6.1.4.1.6527.3.1.2.3.60.1.14
The value of the object vRtrMvpnSpmsiMaxLimit specifies the maximum number of RSVP/mLDP P2MP S-PMSI tunnels for the mVPN. Once the limit is reached, no more RSVP/mLDP P2MP S-PMSI are created and traffic over the data-threshold will stay on I-PMSI.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4000  

vRtrFibPriority 1.3.6.1.4.1.6527.3.1.2.3.60.1.15
The value of vRtrFibPriority specifies the priority of updating set of routes into the forwarding plane. If the value of vRtrFibPriority for the VPRN is set to 'high', the FIB (Forwarding Information Base) entries for the VPRN are given priority over all other routes. By default the vRtrFibPriority for a VPRN is set to 'standard' which means the FIB entries for the VPRN do not have any preference over routes from other VPRNs.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER standard(1), high(2)  

vRtrCarrierCarrierVpn 1.3.6.1.4.1.6527.3.1.2.3.60.1.16
The value of vRtrCarrierCarrierVpn specifies whether Carrier supporting Carrier model is supported on this VPRN service.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrLabelMode 1.3.6.1.4.1.6527.3.1.2.3.60.1.17
The value of vRtrLabelMode specifies the mode of allocation of service labels to the routes exported by the VPRN as BGP-VPN routes. If the value of vRtrLabelMode is set to 'nexthop(2)', the service labels are allocated per next-hop. By default the value of vRtrLabelMode is set to 'vrf(1)' which means the service labels are allocated per VRF(Virtual Routing and Forwarding).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER vrf(1), nexthop(2)  

vRtrBgpSharedQueue 1.3.6.1.4.1.6527.3.1.2.3.60.1.18
The value of vRtrBgpSharedQueue specifies whether BGP peers associated with this VPRN instance share a single CPM queue.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrBgpSharedQueueCIR 1.3.6.1.4.1.6527.3.1.2.3.60.1.19
The value of the object vRtrBgpSharedQueueCIR specifies the Committed information rate (CIR) in kbps for BGP shared queue for this VPRN instance.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

vRtrBgpSharedQueuePIR 1.3.6.1.4.1.6527.3.1.2.3.60.1.20
The value of the object vRtrBgpSharedQueuePIR specifies the Peak information rate (PIR) in kbps for BGP shared queue for this VPRN instance.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

vRtrMvpnMdtSafi 1.3.6.1.4.1.6527.3.1.2.3.60.1.21
The value of vRtrMvpnMdtSafi indicates whether MDT-SAFI is enabled on the MVPN or not. If the value of the object is 'true', it indicates that the MDT-SAFI is enabled for MVPN. If the value of the object is 'false', it indicates that the MDT-SAFI is not enabled for MVPN.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrMvpnMdtDefGrpAddrType 1.3.6.1.4.1.6527.3.1.2.3.60.1.22
The value of vRtrPimNgAFGenMdtDefGrpAddrType indicates the type of default core group address of the Multicast Distribution Tree(MDT) specified by vRtrMvpnMdtDefGrpAddress.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

vRtrMvpnMdtDefGrpAddress 1.3.6.1.4.1.6527.3.1.2.3.60.1.23
The value of vRtrPimNgAFGenMdtDefGrpAddress indicates the default core group address of the Multicast Distribution Tree(MDT). The value of this object is applicable only when the value of vRtrMvpnMdtSafi is 'true'.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrMvpnIpmsiEnableBfdRoot 1.3.6.1.4.1.6527.3.1.2.3.60.1.24
The value of vRtrMvpnIpmsiEnableBfdRoot specifies whether or not Bi-directional Forwarding Detection is enabled on the tunnel root. When the value is 'true', the bfd session over RSVP-TE P2MP LSP for upstream fast failover tunnel status detection is enabled on the root. When it is 'false', the bfd session is disabled on the root. An 'inconsistentValue' error is returned if an attempt is made to set this object to 'true' without specifying a value for vRtrMvpnIpmsiBfdRtTraInt. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'rsvp'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrMvpnIpmsiEnableBfdLeaf 1.3.6.1.4.1.6527.3.1.2.3.60.1.25
The value of vRtrMvpnIpmsiEnableBfdLeaf specifies whether or not Bi-directional Forwarding Detection is enabled on the tunnel leaf. When the value is 'true', the bfd session over RSVP-TE P2MP LSP for upstream fast failover tunnel status detection is enabled on the leaf. When it is 'false', the bfd session is disabled on the leaf. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'rsvp'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrMvpnIpmsiBfdRtTraInt 1.3.6.1.4.1.6527.3.1.2.3.60.1.26
The value of vRtrMvpnIpmsiBfdRtTraInt specifies the BFD transmit interval over this interface. The minimum accepted value depends on the value of 'vRtrIfBfdExtType', as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'rsvp'. An 'inconsistentValue' error is returned if an attempt is made to modify the value of this object when vRtrMvpnIpmsiEnableBfdRoot is set to false.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 10..100000  

vRtrMvpnIpmsiBfdRootMult 1.3.6.1.4.1.6527.3.1.2.3.60.1.27
The value of vRtrMvpnIpmsiBfdRootMult specifies the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'rsvp'. An 'inconsistentValue' error is returned if an attempt is made to modify the value of this object when vRtrMvpnIpmsiEnableBfdRoot is set to false.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 3..20  

vRtrVpnBackupPath 1.3.6.1.4.1.6527.3.1.2.3.60.1.28
The value of vRtrVpnBackupPath specifies the address families for which the computation and use of a backup path is enabled for BGP-VPN routes imported into the VPRN.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxVpnIpBackupFamily  

vRtrIpFastReroute 1.3.6.1.4.1.6527.3.1.2.3.60.1.29
The value of vRtrIpFastReroute specifies whether to enable or disable IP fast re-route capability. When the value of vRtrIpFastReroute is set to 'true' IP fast re-route capability is enabled and when vRtrIpFastReroute is set to 'false' IP fast re-route capability is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrGrtLocalMgmtState 1.3.6.1.4.1.6527.3.1.2.3.60.1.30
The value of vRtrGrtLocalMgmtState specifies whether to enable or disable traffic from GRT-leaking enabled VPRN instances to reach local interfaces in the base routing instance. When the value of vRtrGrtLocalMgmtState is set to 'true', management protocols like SSH, Telnet, FTP, SNMP, etc are allowed from a GRT-leaking enabled VPRN to access local interfaces in the global routing instance. Ping and traceroute are independent of the value of 'vRtrGrtLocalMgmtState'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfExtTable 1.3.6.1.4.1.6527.3.1.2.3.61
The vRtrIfExtTable has an entry for each router interface configured in the system. This table augments the vRtrIfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfExtEntry

vRtrIfExtEntry 1.3.6.1.4.1.6527.3.1.2.3.61.1
Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfExtEntry  

vRtrIfLsrIpLoadBalancing 1.3.6.1.4.1.6527.3.1.2.3.61.1.1
The value of vRtrIfLsrIpLoadBalancing specifies whether the IP Header is used in the LAG and ECMP LSR hashing algorithm. This is the per interface setting. When set to 'label-only (1)' only the label is used in the hashing algorithm. When set to 'label-ip (2)', the IP Header is included in the hashing algorithm. When set to 'ip-only (3)' the IP Header is used exclusively in the hashing Algorithm. When set to 'system (0)', the hashing algorithm is inherited from the object tmnxLsrIpLoadBalancing.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER system(0), label-only(1), label-ip(2), ip-only(3)  

vRtrIfIngressIpv4Flowspec 1.3.6.1.4.1.6527.3.1.2.3.61.1.2
The value of vRtrIfIngressIpv4Flowspec specifies whether ingress Flowspec for IPv4 is enabled for this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfInfo 1.3.6.1.4.1.6527.3.1.2.3.61.1.3
The value of vRtrIfInfo specifies the information used to authenticate the interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..257)  

vRtrIfInfoEncrypted 1.3.6.1.4.1.6527.3.1.2.3.61.1.4
The object vRtrIfInfoEncrypted is currently not supported.
Status: obsolete Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrIfQosRouteLookup 1.3.6.1.4.1.6527.3.1.2.3.61.1.5
The value of vRtrIfQosRouteLookup specifies whether QoS classification of the ingress IP packets based on the route lookup is enabled for ipv4 on this router interface. By default the value of vRtrIfQosRouteLookup is set to 'none (0)', which means the Qos classification of incoming IP packets based on the route lookup is disabled for ipv4 on this interface. When the value of vRtrIfQosRouteLookup is 'destination (1)', the QoS route lookup is enabled and the Qos classification of incoming IP packets is based on the destination address matching. When the value of vRtrIfQosRouteLookup is 'source (2)', the QoS route lookup is enabled and the Qos classification of incoming IP packets is based on the source address matching.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), destination(1), source(2)  

vRtrIfIpv6QosRouteLookup 1.3.6.1.4.1.6527.3.1.2.3.61.1.6
The value of vRtrIfIpv6QosRouteLookup specifies whether QoS classification of the ingress IP packets based on the route lookup is enabled for ipv6 on this router interface. By default the value of vRtrIfIpv6QosRouteLookup is 'none (0)', which means the Qos classification of incoming IP packets based on the route lookup is disabled on this interface. When the value of vRtrIfIpv6QosRouteLookup is 'destination (1)', the QoS route lookup is enabled and the Qos classification of incoming IP packets is based on the destination address matching.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), destination(1)  

vRtrIfStatusString 1.3.6.1.4.1.6527.3.1.2.3.61.1.7
The value of vRtrIfStatusString indicates the status information about the interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vRtrIfIpv6uRPFCheckState 1.3.6.1.4.1.6527.3.1.2.3.61.1.8
The value of vRtrIfIpv6uRPFCheckState specifies whether unicast RPF (uRPF) check is enabled on this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrIfIpv6uRPFCheckMode 1.3.6.1.4.1.6527.3.1.2.3.61.1.9
The value of vRtrIfIpv6uRPFCheckMode specifies the mode of unicast RPF check. By default the value of vRtrIfIpv6uRPFCheckMode is 'strict (0)',which means that uRPF checks whether the incoming packet has a source address that matches a prefix in the routing table, and whether the interface expects to recieve a packet with this source address prefix. When the value of vRtrIfIpv6uRPFCheckMode is 'loose (1)', the uRPF checks whether the incoming packet has a source address with a corresponding prefix in the routing table. It does not check whether the interface expects to recieve a packet with a specific source address prefix. This object is valid only when value of vRtrIfIpv6uRPFCheckState is set to 'enabled'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER strict(1), loose(2)  

vRtrIfTmsOffRampVprn 1.3.6.1.4.1.6527.3.1.2.3.61.1.10
The vRtrIfTmsOffRampVprn specifies the off-ramp VPRN service associated with this threat-management service (TMS) interface. An 'inconsistentValue' error is returned when this object is set to a non-default value when vRtrIfType is not set to 'tmsService'. An 'inconsistentValue' error is returned when this object is set to a different value when vRtrIfRowStatus is set to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxServId  

vRtrIfTmsMgmtVprn 1.3.6.1.4.1.6527.3.1.2.3.61.1.11
The vRtrIfTmsMgmtVprn specifies the management VPRN service associated with this threat-management service (TMS) interface. An 'inconsistentValue' error is returned when this object is set to a non-default value when vRtrIfType is not set to 'tmsService'. An 'inconsistentValue' error is returned when this object is set to a different value when vRtrIfRowStatus is set to 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxServId  

vRtrRsvpTunIfTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.62
The value of vRtrRsvpTunIfTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrRsvpTunIfEntryTable by adding, deleting an entry or change to a writable object in the table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrRsvpTunIfEntryTable 1.3.6.1.4.1.6527.3.1.2.3.63
The vRtrRsvpTunIfEntryTable has an entry for each P2MP RSVP tunnel interface configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrRsvpTunIfEntry

vRtrRsvpTunIfEntry 1.3.6.1.4.1.6527.3.1.2.3.63.1
Each row entry in the vRtrRsvpTunIfEntryTable represents a P2MP RSVP tunnel interface on this router. Entries can be created and deleted via SNMP SET operations using the vRtrRsvpTunIfRowStatus variable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrRsvpTunIfEntry  

vRtrRsvpTunIfLspName 1.3.6.1.4.1.6527.3.1.2.3.63.1.1
The value of vRtrRsvpTunIfLspName indicates the LSP name of the P2MP RSVP tunnel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

vRtrRsvpTunIfSenderAddrType 1.3.6.1.4.1.6527.3.1.2.3.63.1.2
The value of vRtrRsvpTunIfSenderAddrType indicates the type of address of an RSVP sender for the P2MP RSVP tunnel interface instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrRsvpTunIfSenderAddr 1.3.6.1.4.1.6527.3.1.2.3.63.1.3
The value of vRtrRsvpTunIfSenderAddr indicates the address of an RSVP sender for the P2MP RSVP tunnel interface instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrRsvpTunIfRowStatus 1.3.6.1.4.1.6527.3.1.2.3.63.1.4
The value of vRtrRsvpTunIfRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrRsvpTunIfLastChanged 1.3.6.1.4.1.6527.3.1.2.3.63.1.5
The value of vRtrRsvpTunIfLastChanged indicates the timestamp of the last change to this row in vRtrRsvpTunIfEntryTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrRsvpTunIfSessionId 1.3.6.1.4.1.6527.3.1.2.3.63.1.6
The value of vRtrRsvpTunIfSessionId specifies the discriminator for a BFD session for this P2MP RSVP tunnel interface. When vRtrRsvpTunIfSessionId has a value of 0, the BFD session is not operational. This identifier needs to be unique within a tunnel interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..4000  

vRtrRsvpTunIfTransmitInt 1.3.6.1.4.1.6527.3.1.2.3.63.1.7
The value of vRtrRsvpTunIfTransmitInt specifies the transmit interval for a BFD session for this P2MP RSVP tunnel interface. When vRtrRsvpTunIfTransmitInt has a value of 0, the transmit interval is not applicable.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 100..100000  

vRtrRsvpTunIfMultiplier 1.3.6.1.4.1.6527.3.1.2.3.63.1.8
The value of vRtrRsvpTunIfMultiplier specifies the multiplier to detect if a BFD session is down for this P2MP RSVP tunnel interface. When vRtrRsvpTunIfMultiplier has a value of 0, the multiplier is not applicable.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 3..20  

vRtrRsvpTunIfStandbyLspName 1.3.6.1.4.1.6527.3.1.2.3.63.1.9
The value of vRtrRsvpTunIfStandbyLspName specifies the LSP name of the standby P2MP RSVP tunnel interface.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItem  

vRtrRsvpTunIfStandbyAddrType 1.3.6.1.4.1.6527.3.1.2.3.63.1.10
The value of vRtrRsvpTunIfStandbyAddrType specifies the address type of the standby P2MP RSVP tunnel interface.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrRsvpTunIfStandbyAddr 1.3.6.1.4.1.6527.3.1.2.3.63.1.11
The value of vRtrRsvpTunIfStandbyAddr specifies the standby address of the standby P2MP RSVP tunnel interface.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrRsvpTunIfIfIndex 1.3.6.1.4.1.6527.3.1.2.3.63.1.12
The value of vRtrRsvpTunIfIfIndex indicates the tunnel interface index of the P2MP RSVP tunnel interface. It is a unique value among entries with the same value of vRtrID.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrRsvpTunIfHoldTimer 1.3.6.1.4.1.6527.3.1.2.3.63.1.13
The value of vRtrRsvpTunIfHoldTimer specifies the time interval that a leaf node waits after a BFD session over a primary P2MP RSVP tunnel interface is restored and before it programs multicast records to accept traffic from that primary tunnel interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..30  

vRtrRsvpTunIfStandbySessionId 1.3.6.1.4.1.6527.3.1.2.3.63.1.14
The value of vRtrRsvpTunIfStandbySessionId specifies the discriminator for a BFD session over the standby P2MP RSVP tunnel interface. When vRtrRsvpTunIfStandbySessionId has a value of 0, the BFD session is not operational. This identifier needs to be unique within a tunnel interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..4000  

vRtrRsvpTunIfStandbyIfIndex 1.3.6.1.4.1.6527.3.1.2.3.63.1.15
The value of vRtrRsvpTunIfStandbyIfIndex indicates the tunnel interface index of the standby P2MP RSVP tunnel interface.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrRsvpTunIfDescription 1.3.6.1.4.1.6527.3.1.2.3.63.1.16
The value of vRtrRsvpTunIfDescription specifies a user provided description string for this rsvp tunnel-interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

vRtrRsvpTunIfSrcTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.64
The value of vRtrRsvpTunIfSrcTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrRsvpTunIfSrcEntryTable by adding, deleting an entry or change to a writable object in the table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrRsvpTunIfSrcEntryTable 1.3.6.1.4.1.6527.3.1.2.3.65
The vRtrRsvpTunIfSrcEntryTable has an entry for each multicast source tracked by BFD over a P2MP RSVP tunnel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrRsvpTunIfSrcEntry

vRtrRsvpTunIfSrcEntry 1.3.6.1.4.1.6527.3.1.2.3.65.1
Each row entry represents a multicast source tracked by BFD over P2MP RSVP tunnel interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrRsvpTunIfSrcRowStatus variable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrRsvpTunIfSrcEntry  

vRtrRsvpTunIfSrcAddrType 1.3.6.1.4.1.6527.3.1.2.3.65.1.1
The value of vRtrRsvpTunIfSrcAddrType indicates the type of address of a multicast source for the P2MP RSVP tunnel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrRsvpTunIfSrcAddr 1.3.6.1.4.1.6527.3.1.2.3.65.1.2
The value of vRtrRsvpTunIfSrcAddr indicates the address of a multicast source for the P2MP RSVP tunnel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrRsvpTunIfSrcRowStatus 1.3.6.1.4.1.6527.3.1.2.3.65.1.3
The value of vRtrRsvpTunIfSrcRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrRsvpTunIfSrcLastChanged 1.3.6.1.4.1.6527.3.1.2.3.65.1.4
The value of vRtrRsvpTunIfSrcLastChanged indicates the timestamp of the last change to this row in vRtrRsvpTunIfSrcEntryTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrRsvpTunIfSrcBfdEnable 1.3.6.1.4.1.6527.3.1.2.3.65.1.5
The value of vRtrRsvpTunIfSrcBfdEnable specifies if the BFD session to track the multicast source over the P2MP RSVP tunnel interface is enabled or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrRsvpTunIfSrcSessionId 1.3.6.1.4.1.6527.3.1.2.3.65.1.6
The value of vRtrRsvpTunIfSrcSessionId specifies the discriminator for a BFD session to track the multicast source over the P2MP RSVP tunnel interface. When vRtrRsvpTunIfSrcSessionId has a value of 0, the BFD session is not operational. This Id needs to be unique within a tunnel interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

vRtrRsvpTunIfSrcTransmitInt 1.3.6.1.4.1.6527.3.1.2.3.65.1.7
The value of vRtrRsvpTunIfSrcTransmitInt specifies the transmit interval for a BFD session to track the multicast source over the P2MP RSVP tunnel interface. When vRtrRsvpTunIfSrcTransmitInt has a value of 0, the transmit interval is not applicable.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 100..100000  

vRtrRsvpTunIfSrcMultiplier 1.3.6.1.4.1.6527.3.1.2.3.65.1.8
The value of vRtrRsvpTunIfSrcMultiplier specifies the multiplier to detect if a BFD session to track the multicast source over the P2MP RSVP tunnel interface is down. When vRtrRsvpTunIfSrcMultiplier has a value of 0, the multiplier is not applicable.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 3..20  

vRtrRsvpTunIfSrcStandbySessionId 1.3.6.1.4.1.6527.3.1.2.3.65.1.9
The value of vRtrRsvpTunIfSrcStandbySessionId specifies the discriminator for a BFD session to track the multicast source over the standby P2MP RSVP tunnel interface. When vRtrRsvpTunIfSrcStandbySessionId has a value of 0, the BFD session is not operational. This Id needs to be unique within a tunnel interface.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

vRtrLdpTunIfTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.66
The value of vRtrLdpTunIfTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrLdpTunIfEntryTable by adding, deleting an entry or change to a writable object in the table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpTunIfEntryTable 1.3.6.1.4.1.6527.3.1.2.3.67
The vRtrLdpTunIfEntryTable has an entry for each Ldp tunnel configured in the system. Each row entry represents a virtual router LDP tunnel interface in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrLdpTunIfEntry

vRtrLdpTunIfEntry 1.3.6.1.4.1.6527.3.1.2.3.67.1
Each row entry represents an Ldp tunnel interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrLdpTunIfRowStatus variable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrLdpTunIfEntry  

vRtrLdpTunIfP2mpId 1.3.6.1.4.1.6527.3.1.2.3.67.1.1
The value of vRtrLdpTunIfP2mpId indicates the LDP P2MP identifier.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrLdpTunIfSenderAddrType 1.3.6.1.4.1.6527.3.1.2.3.67.1.2
The value of vRtrLdpTunIfSenderAddrType indicates the type of address of an LDP sender for the P2MP RSVP tunnel interface instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrLdpTunIfSenderAddr 1.3.6.1.4.1.6527.3.1.2.3.67.1.3
The value of vRtrLdpTunIfSenderAddr indicates the address of an LDP sender for the P2MP RSVP tunnel interface instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrLdpTunIfRowStatus 1.3.6.1.4.1.6527.3.1.2.3.67.1.4
The value of the object vRtrLdpTunIfRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The value of the object 'vRtrLdpTunIfRootNode' specifies if the given ldp-p2mp tunnel interface instance is a root-node for that tunnel interface.The value of this object must be specified when the row is created and cannot be changed while 'vRtrLdpTunIfRowStatus' is 'active'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrLdpTunIfLastChanged 1.3.6.1.4.1.6527.3.1.2.3.67.1.5
The value of vRtrLdpTunIfLastChanged indicates the timestamp of the last change to this row in vRtrLdpTunIfEntryTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrLdpTunIfIfIndex 1.3.6.1.4.1.6527.3.1.2.3.67.1.6
The value of vRtrLdpTunIfIfIndex indicates the interface index of the virtual router LDP tunnel interface. It is a unique value among entries with the same value of vRtrID.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

vRtrLdpTunIfDescription 1.3.6.1.4.1.6527.3.1.2.3.67.1.7
The value of vRtrLdpTunIfDescription specifies a user provided description string for this ldp tunnel-interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

vRtrLdpTunIfRootNode 1.3.6.1.4.1.6527.3.1.2.3.67.1.8
The value of vRtrLdpTunIfRootNode specifies if the given ldp-p2mp tunnel interface instance is a root-node for that tunnel interface. The value of this object must be specified when the row is created and cannot be changed while 'vRtrLdpTunIfRowStatus' is 'active'. An 'inconsistentValue' error is returned if an attempt is made to set this object individually.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

vRtrInetCidrRteTnlExtTable 1.3.6.1.4.1.6527.3.1.2.3.68
The vRtrInetCidrRteTnlExtTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB, by adding three indexes and displays only tunneled routes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInetCidrRteTnlExtEntry

vRtrInetCidrRteTnlExtEntry 1.3.6.1.4.1.6527.3.1.2.3.68.1
Each row entry in the vRtrInetCidrRteTnlExtTable represents an entry for a tunneled route on the Alcatel-Lucent SROS series.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrInetCidrRteTnlExtEntry  

vRtrInetCidrRteTnlNextHopType 1.3.6.1.4.1.6527.3.1.2.3.68.1.1
The value of vRtrInetCidrRteTnlNextHopType indicates the type of next hop for this route.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxInetCidrNextHopType  

vRtrInetCidrRteTnlNextHopOwner 1.3.6.1.4.1.6527.3.1.2.3.68.1.2
The value of vRtrInetCidrRteTnlNextHopOwner indicates the owner of next hop for this route.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxInetCidrNextHopOwner  

vRtrInetCidrRteTnlNextHopTnlId 1.3.6.1.4.1.6527.3.1.2.3.68.1.3
Additional table index provided to distinguish between multiple RSVP tunnel-ids to same destination with the same vRtrInetCidrRteTnlNextHopType and vRtrInetCidrRteTnlNextHopOwner.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrInetCidrRteTnlEnabledTime 1.3.6.1.4.1.6527.3.1.2.3.68.1.4
The vRtrInetCidrRteTnlEnabledTime variable indicates the sysUpTime value for this route entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfBfdExtTableLastChanged 1.3.6.1.4.1.6527.3.1.2.3.70
The value of vRtrIfBfdExtTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrIfBfdExtTable by adding, deleting an entry or change to a writable object in the table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfBfdExtTable 1.3.6.1.4.1.6527.3.1.2.3.71
The vRtrIfBfdExtTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfBfdExtEntry

vRtrIfBfdExtEntry 1.3.6.1.4.1.6527.3.1.2.3.71.1
Each row entry represents the BFD configuration for the vRtrIfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfBfdExtEntry  

vRtrIfBfdExtAddressType 1.3.6.1.4.1.6527.3.1.2.3.71.1.1
The value of vRtrIfBfdExtAddressType indicates the IP address type of the BFD configuration of this interface. vRtrIfBfdExtAddressType supports only InetAddressType values 'ipv4 (1)' and 'ipv6 (2)'.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrIfBfdExtAdminState 1.3.6.1.4.1.6527.3.1.2.3.71.1.2
The value of vRtrIfBfdExtAdminState specifies the admin state of BFD on this interface. When the value of vRtrIfBfdExtAdminState is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot.
Status: current Access: read-write
OBJECT-TYPE    
  TmnxAdminState  

vRtrIfBfdExtTransmitInterval 1.3.6.1.4.1.6527.3.1.2.3.71.1.3
The value of vRtrIfBfdExtTransmitInterval specifies the BFD transmit interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdExtType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..100000  

vRtrIfBfdExtReceiveInterval 1.3.6.1.4.1.6527.3.1.2.3.71.1.4
The value of vRtrIfBfdExtReceiveInterval specifies the BFD receive interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdExtType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..100000  

vRtrIfBfdExtMultiplier 1.3.6.1.4.1.6527.3.1.2.3.71.1.5
The value of vRtrIfBfdExtMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..20  

vRtrIfBfdExtEchoInterval 1.3.6.1.4.1.6527.3.1.2.3.71.1.6
The value of vRtrIfBfdExtEchoInterval specifies the BFD echo interval over this interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 100..100000  

vRtrIfBfdExtType 1.3.6.1.4.1.6527.3.1.2.3.71.1.7
The value of vRtrIfBfdExtType specifies the configured termination of a BFD session on this interface. The value of 'cpmNp(1)' specifies termination on the CPM card's Network Processor. The value of 'auto(2)' specifies a system-selected termination other than the CPM Network Processor.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cpmNp(1), auto(2), iomHw(3)  

vRtrIfIpReasTable 1.3.6.1.4.1.6527.3.1.2.3.72
The vRtrIfIpReasTable table contains the configuration for IP Reassembly on the vRtrIfEntry with the same indices.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfIpReasEntry

vRtrIfIpReasEntry 1.3.6.1.4.1.6527.3.1.2.3.72.1
Each row entry represents the IP Reassembly configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfIpReasEntry  

vRtrIfIpReasPortID 1.3.6.1.4.1.6527.3.1.2.3.72.1.1
The value of vRtrIfIpReasPortID specifies the physical port which performs IP reassembly. When vRtrIfIpReasPortID is zero (0), then there is no IP reassembly supported on the IP interface.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxPortID  

vRtrIfIpReasContextValue 1.3.6.1.4.1.6527.3.1.2.3.72.1.2
The value of vRtrIfIpReasContextValue along with vRtrIfIpReasPortID specifies the reassembly context in a given virtual router instance.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxReasContextVal  

vRtrMsPwL2RtTable 1.3.6.1.4.1.6527.3.1.2.3.73
The vRtrMsPwL2RtTable contains LDP FEC-129 Attachment Individual Identifier (AII) type 2 layer-2 route table entries used by multi-segment pseudo-wire.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrMsPwL2RtEntry

vRtrMsPwL2RtEntry 1.3.6.1.4.1.6527.3.1.2.3.73.1
The vRtrMsPwL2RtEntry consists of the mutli-segment pseudo-wire LDP FEC-129 layer 2 route entry information.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrMsPwL2RtEntry  

vRtrMsPwL2RtDestGlobalId 1.3.6.1.4.1.6527.3.1.2.3.73.1.1
The value of vRtrMsPwL2RtDestGlobalId specifies the global identifier of Attachment Individual Identifier (AII) portion of the Generalized Id FEC element of the destination of the route-entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxPwGlobalIdOrZero  

vRtrMsPwL2RtDestPrefix 1.3.6.1.4.1.6527.3.1.2.3.73.1.2
The value of vRtrMsPwL2RtDestPrefix specifies the prefix to the Attachment Individual Identifier (AII) portion of the Generalized Id FEC element of the destination of the route-entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrMsPwL2RtDestAcId 1.3.6.1.4.1.6527.3.1.2.3.73.1.3
The value of vRtrMsPwL2RtDestAcId specifies the attachment circuit identifier part of Attachment Individual Identifier (AII) portion of the Generalized Id FEC element of the destination of the route-entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrMsPwL2RtDestPrefixLen 1.3.6.1.4.1.6527.3.1.2.3.73.1.4
The value of vRtrMsPwL2RtDestPrefix specifies the length of the prefix to the Attachment Individual Identifier (AII) portion of the Generalized Id FEC element of the destination of the route-entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrMsPwL2RtDestRD 1.3.6.1.4.1.6527.3.1.2.3.73.1.5
The value of vRtrMsPwL2RtDestRD indicates an identifier attached to routes that distinguishes to which VPN it belongs.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxVPNRouteDistinguisher  

vRtrMsPwL2RtNextHopAddrType 1.3.6.1.4.1.6527.3.1.2.3.73.1.6
The value of vRtrMsPwL2RtNextHopAddrType indicates the address type of vRtrMsPwL2RtNextHopAddr object.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrMsPwL2RtNextHopAddr 1.3.6.1.4.1.6527.3.1.2.3.73.1.7
The value of vRtrMsPwL2RtNextHopAddr indicates the address of the next hop in the LDP FEC-129 route-entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

vRtrMsPwL2RtNextHopOwner 1.3.6.1.4.1.6527.3.1.2.3.73.1.8
The value of vRtrMsPwL2RtNextHopOwner indicates the owner of the next hop in the LDP FEC-129 route-entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxL3RouteOwner  

vRtrMsPwL2RtRDCommunity 1.3.6.1.4.1.6527.3.1.2.3.73.1.9
The value of the object vRtrMsPwL2RtRDCommunity indicates the BGP community associated with the route-distinguisher in the LDP FEC-129 route-entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrMsPwL2RtIsBestRoute 1.3.6.1.4.1.6527.3.1.2.3.73.1.10
The value of the object vRtrMsPwL2RtIsBestRoute indiates the best route from the destination to the next hop.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

vRtrMsPwL2RtAge 1.3.6.1.4.1.6527.3.1.2.3.73.1.11
The value of vRtrMsPwL2RtAge indicates the number of seconds since this route was last updated or otherwise determined to be correct.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrIfStatsExtTable 1.3.6.1.4.1.6527.3.1.2.3.74
The vRtrIfStatsExtTable table contains statistics per virtual router interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfStatsExtEntry

vRtrIfStatsExtEntry 1.3.6.1.4.1.6527.3.1.2.3.74.1
Each row entry represents the statistics per virtual router interface. Entries are created and deleted when entries in the vRtrIfEntry are created and deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfStatsExtEntry  

vRtrIfTxPkts 1.3.6.1.4.1.6527.3.1.2.3.74.1.1
The value of vRtrIfTxPkts indicates the number of total packets sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxPktsLow32 1.3.6.1.4.1.6527.3.1.2.3.74.1.2
The value of vRtrIfTxPktsLow32 indicates the lower 32 bits of the value of vRtrIfTxPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxPktsHigh32 1.3.6.1.4.1.6527.3.1.2.3.74.1.3
The value of vRtrIfTxPktsHigh32 indicates the high 32 bits of the value of vRtrIfTxPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxBytes 1.3.6.1.4.1.6527.3.1.2.3.74.1.4
The value of vRtrIfTxBytes indicates the number of total bytes sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vRtrIfTxBytesLow32 1.3.6.1.4.1.6527.3.1.2.3.74.1.5
The value of vRtrIfTxBytesLow32 indicates the lower 32 bits of the value of vRtrIfTxBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfTxBytesHigh32 1.3.6.1.4.1.6527.3.1.2.3.74.1.6
The value of vRtrIfTxBytesHigh32 indicates the high 32 bits of the value of vRtrIfTxBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrStatExtTable 1.3.6.1.4.1.6527.3.1.2.3.75
The vRtrStatExtTable has an entry for each virtual router configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrStatExtEntry

vRtrStatExtEntry 1.3.6.1.4.1.6527.3.1.2.3.75.1
Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrStatExtEntry  

vRtrISISAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.1
The value of vRtrISISAltRoutes indicates the current number of alternate ISIS routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrISISActiveAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.2
The value of vRtrISISActiveAltRoutes indicates the current number of alternate ISIS routes that are active for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrBGPAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.3
The value of vRtrBGPAltRoutes indicates the current number of alternate BGP routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrBGPActiveAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.4
The value of vRtrBGPActiveAltRoutes indicates the current number of alternate BGP routes that are active for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrStatCurrNumAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.5
The value of vRtrStatCurrNumAltRoutes indicates the current number of total alternate routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6ISISAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.6
The value of vRtrV6ISISAltRoutes indicates the current number of IPv6 alternate ISIS routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6ISISActiveAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.7
The value of vRtrV6ISISActiveAltRoutes indicates the current number of IPv6 alternate ISIS routes that are active for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6BGPAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.8
The value of vRtrV6BGPAltRoutes indicates the current number of IPv6 alternate BGP routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6BGPActiveAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.9
The value of vRtrV6BGPActiveAltRoutes indicates the current number of IPv6 alternate BGP routes that are active for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6StatCurrNumAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.10
The value of vRtrV6StatCurrNumAltRoutes indicates the current number of IPv6 total alternate routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrBGPVPNAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.11
The value of vRtrBGPVPNAltRoutes indicates the current number of alternate BGP-VPN routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrBGPVPNActiveAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.12
The value of vRtrBGPVPNActiveAltRoutes indicates the current number of alternate BGP-VPN routes that are active for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6BGPVPNAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.13
The value of vRtrV6BGPVPNAltRoutes indicates the current number of IPv6 alternate BGP-VPN routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6BGPVPNActiveAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.14
The value of vRtrV6BGPVPNActiveAltRoutes indicates the current number of IPv6 alternate BGP-VPN routes that are active for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrOSPFAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.15
The value of vRtrOSPFAltRoutes indicates the current number of alternate OSPF routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrOSPFActiveAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.16
The value of vRtrOSPFActiveAltRoutes indicates the current number of alternate OSPF routes that are active for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6OSPFAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.17
The value of vRtrV6OSPFAltRoutes indicates the current number of IPv6 alternate OSPF routes for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrV6OSPFActiveAltRoutes 1.3.6.1.4.1.6527.3.1.2.3.75.1.18
The value of vRtrV6OSPFActiveAltRoutes indicates the current number of IPv6 alternate OSPF routes that are active for this instance of the route table.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vRtrVrfPolicyTable 1.3.6.1.4.1.6527.3.1.2.3.76
The vRtrVrfPolicyTable has an entry for each virtual router configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrVrfPolicyEntry

vRtrVrfPolicyEntry 1.3.6.1.4.1.6527.3.1.2.3.76.1
Each row entry represents a collection of policies for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrVrfPolicyEntry  

vRtrVrfImportPolicy1 1.3.6.1.4.1.6527.3.1.2.3.76.1.1
The value of vRtrVrfImportPolicy1 specifies the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy2 1.3.6.1.4.1.6527.3.1.2.3.76.1.2
The value of vRtrVrfImportPolicy2 specifies the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy3 1.3.6.1.4.1.6527.3.1.2.3.76.1.3
The value of vRtrVrfImportPolicy3 specifies the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy4 1.3.6.1.4.1.6527.3.1.2.3.76.1.4
The value of vRtrVrfImportPolicy4 specifies the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy5 1.3.6.1.4.1.6527.3.1.2.3.76.1.5
The value of vRtrVrfImportPolicy5 specifies the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy6 1.3.6.1.4.1.6527.3.1.2.3.76.1.6
The value of vRtrVrfImportPolicy6 specifies the sixth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy7 1.3.6.1.4.1.6527.3.1.2.3.76.1.7
The value of vRtrVrfImportPolicy6 specifies the seventh policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy8 1.3.6.1.4.1.6527.3.1.2.3.76.1.8
The value of vRtrVrfImportPolicy8 specifies the eighth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy9 1.3.6.1.4.1.6527.3.1.2.3.76.1.9
The value of vRtrVrfImportPolicy9 specifies the ninth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy10 1.3.6.1.4.1.6527.3.1.2.3.76.1.10
The value of vRtrVrfImportPolicy10 specifies the tenth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy11 1.3.6.1.4.1.6527.3.1.2.3.76.1.11
The value of vRtrVrfImportPolicy11 specifies the eleventh policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy12 1.3.6.1.4.1.6527.3.1.2.3.76.1.12
The value of vRtrVrfImportPolicy12 specifies the twelfth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy13 1.3.6.1.4.1.6527.3.1.2.3.76.1.13
The value of vRtrVrfImportPolicy13 specifies the thirteenth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy14 1.3.6.1.4.1.6527.3.1.2.3.76.1.14
The value of vRtrVrfImportPolicy14 specifies the fourteenth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfImportPolicy15 1.3.6.1.4.1.6527.3.1.2.3.76.1.15
The value of vRtrVrfImportPolicy15 specifies the fifteenth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy1 1.3.6.1.4.1.6527.3.1.2.3.76.1.16
The value of vRtrVrfExportPolicy1 specifies the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy2 1.3.6.1.4.1.6527.3.1.2.3.76.1.17
The value of vRtrVrfExportPolicy2 specifies the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy3 1.3.6.1.4.1.6527.3.1.2.3.76.1.18
The value of vRtrVrfExportPolicy3 specifies the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy4 1.3.6.1.4.1.6527.3.1.2.3.76.1.19
The value of vRtrVrfExportPolicy4 specifies the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy5 1.3.6.1.4.1.6527.3.1.2.3.76.1.20
The value of vRtrVrfExportPolicy5 specifies the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy6 1.3.6.1.4.1.6527.3.1.2.3.76.1.21
The value of vRtrVrfExportPolicy6 specifies the sixth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy7 1.3.6.1.4.1.6527.3.1.2.3.76.1.22
The value of vRtrVrfExportPolicy6 specifies the seventh policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy8 1.3.6.1.4.1.6527.3.1.2.3.76.1.23
The value of vRtrVrfExportPolicy8 specifies the eighth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy9 1.3.6.1.4.1.6527.3.1.2.3.76.1.24
The value of vRtrVrfExportPolicy9 specifies the ninth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy10 1.3.6.1.4.1.6527.3.1.2.3.76.1.25
The value of vRtrVrfExportPolicy10 specifies the tenth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy11 1.3.6.1.4.1.6527.3.1.2.3.76.1.26
The value of vRtrVrfExportPolicy11 specifies the eleventh policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy12 1.3.6.1.4.1.6527.3.1.2.3.76.1.27
The value of vRtrVrfExportPolicy12 specifies the twelfth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy13 1.3.6.1.4.1.6527.3.1.2.3.76.1.28
The value of vRtrVrfExportPolicy13 specifies the thirteenth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy14 1.3.6.1.4.1.6527.3.1.2.3.76.1.29
The value of vRtrVrfExportPolicy14 specifies the fourteenth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrVrfExportPolicy15 1.3.6.1.4.1.6527.3.1.2.3.76.1.30
The value of vRtrVrfExportPolicy15 specifies the fifteenth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfPolicyTable 1.3.6.1.4.1.6527.3.1.2.3.77
The vRtrMvpnVrfPolicyTable has an entry for each virtual router configured in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrMvpnVrfPolicyEntry

vRtrMvpnVrfPolicyEntry 1.3.6.1.4.1.6527.3.1.2.3.77.1
Each row entry represents a collection of policies for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrMvpnVrfPolicyEntry  

vRtrMvpnVrfImportPolicy1 1.3.6.1.4.1.6527.3.1.2.3.77.1.1
The value of vRtrMvpnVrfImportPolicy1 specifies the first policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy2 1.3.6.1.4.1.6527.3.1.2.3.77.1.2
The value of vRtrMvpnVrfImportPolicy2 specifies the second policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy3 1.3.6.1.4.1.6527.3.1.2.3.77.1.3
The value of vRtrMvpnVrfImportPolicy3 specifies the third policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy4 1.3.6.1.4.1.6527.3.1.2.3.77.1.4
The value of vRtrMvpnVrfImportPolicy4 specifies the fourth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy5 1.3.6.1.4.1.6527.3.1.2.3.77.1.5
The value of vRtrMvpnVrfImportPolicy5 specifies the fifth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy6 1.3.6.1.4.1.6527.3.1.2.3.77.1.6
The value of vRtrMvpnVrfImportPolicy6 specifies the sixth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy7 1.3.6.1.4.1.6527.3.1.2.3.77.1.7
The value of vRtrMvpnVrfImportPolicy6 specifies the seventh policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy8 1.3.6.1.4.1.6527.3.1.2.3.77.1.8
The value of vRtrMvpnVrfImportPolicy8 specifies the eighth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy9 1.3.6.1.4.1.6527.3.1.2.3.77.1.9
The value of vRtrMvpnVrfImportPolicy9 specifies the ninth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy10 1.3.6.1.4.1.6527.3.1.2.3.77.1.10
The value of vRtrMvpnVrfImportPolicy10 specifies the tenth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy11 1.3.6.1.4.1.6527.3.1.2.3.77.1.11
The value of vRtrMvpnVrfImportPolicy11 specifies the eleventh policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy12 1.3.6.1.4.1.6527.3.1.2.3.77.1.12
The value of vRtrMvpnVrfImportPolicy12 specifies the twelfth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy13 1.3.6.1.4.1.6527.3.1.2.3.77.1.13
The value of vRtrMvpnVrfImportPolicy13 specifies the thirteenth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy14 1.3.6.1.4.1.6527.3.1.2.3.77.1.14
The value of vRtrMvpnVrfImportPolicy14 specifies the fourteenth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfImportPolicy15 1.3.6.1.4.1.6527.3.1.2.3.77.1.15
The value of vRtrMvpnVrfImportPolicy15 specifies the fifteenth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy1 1.3.6.1.4.1.6527.3.1.2.3.77.1.16
The value of vRtrMvpnVrfExportPolicy1 specifies the first policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy2 1.3.6.1.4.1.6527.3.1.2.3.77.1.17
The value of vRtrMvpnVrfExportPolicy2 specifies the second policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy3 1.3.6.1.4.1.6527.3.1.2.3.77.1.18
The value of vRtrMvpnVrfExportPolicy3 specifies the third policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy4 1.3.6.1.4.1.6527.3.1.2.3.77.1.19
The value of vRtrMvpnVrfExportPolicy4 specifies the fourth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy5 1.3.6.1.4.1.6527.3.1.2.3.77.1.20
The value of vRtrMvpnVrfExportPolicy5 specifies the fifth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy6 1.3.6.1.4.1.6527.3.1.2.3.77.1.21
The value of vRtrMvpnVrfExportPolicy6 specifies the sixth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy7 1.3.6.1.4.1.6527.3.1.2.3.77.1.22
The value of vRtrMvpnVrfExportPolicy6 specifies the seventh policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy8 1.3.6.1.4.1.6527.3.1.2.3.77.1.23
The value of vRtrMvpnVrfExportPolicy8 specifies the eighth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy9 1.3.6.1.4.1.6527.3.1.2.3.77.1.24
The value of vRtrMvpnVrfExportPolicy9 specifies the ninth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy10 1.3.6.1.4.1.6527.3.1.2.3.77.1.25
The value of vRtrMvpnVrfExportPolicy10 specifies the tenth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy11 1.3.6.1.4.1.6527.3.1.2.3.77.1.26
The value of vRtrMvpnVrfExportPolicy11 specifies the eleventh policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy12 1.3.6.1.4.1.6527.3.1.2.3.77.1.27
The value of vRtrMvpnVrfExportPolicy12 specifies the twelfth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy13 1.3.6.1.4.1.6527.3.1.2.3.77.1.28
The value of vRtrMvpnVrfExportPolicy13 specifies the thirteenth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy14 1.3.6.1.4.1.6527.3.1.2.3.77.1.29
The value of vRtrMvpnVrfExportPolicy14 specifies the fourteenth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrMvpnVrfExportPolicy15 1.3.6.1.4.1.6527.3.1.2.3.77.1.30
The value of vRtrMvpnVrfExportPolicy15 specifies the fifteenth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

vRtrIfQosTable 1.3.6.1.4.1.6527.3.1.2.3.78
The vRtrIfQosTable has an entry for each router interface configured in the system. This table contains objects managing QoS on the interface. This table augments the vRtrIfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfQosEntry

vRtrIfQosEntry 1.3.6.1.4.1.6527.3.1.2.3.78.1
Each row entry represents a virtual router interface QoS management objects in the system. Entries can be created and deleted via SNMP SET operations along with the associated row entry in vRtrIfTable using the vRtrIfRowStatus variable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfQosEntry  

vRtrIfQosNetworkPolicyId 1.3.6.1.4.1.6527.3.1.2.3.78.1.1
The value of vRtrIfQosNetworkPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
Status: current Access: read-create
OBJECT-TYPE    
  TNetworkPolicyID  

vRtrIfQosEgrPortRedirectQGrp 1.3.6.1.4.1.6527.3.1.2.3.78.1.2
The value of vRtrIfQosEgrPortRedirectQGrp specifies the name of the QoS queue-group (TIMETRA-QOS-MIB::tQosEgrQGroupName) used with this interface. An 'inconsistentValue' error is returned if this object is set to a non-default value and an entry corresponding to vRtrIfPortID does not exist in TIMETRA-PORT-MIB::tPortNetEgrQGrpTable.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrIfQosEgrQGrpInstanceId 1.3.6.1.4.1.6527.3.1.2.3.78.1.3
The value of vRtrIfQosEgrQGrpInstanceId specifies the instance of the forwarding-plane egress Queue Group for this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TQosQGrpInstanceIDorZero  

vRtrIfQosIngFpRedirectQGrp 1.3.6.1.4.1.6527.3.1.2.3.78.1.4
The value of vRtrIfQosIngFpRedirectQGrp specifies the forwarding-plane queue group Policy for this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

vRtrIfQosIngQGrpInstanceId 1.3.6.1.4.1.6527.3.1.2.3.78.1.5
The value of vRtrIfQosIngQGrpInstanceId specifies the instance of the forwarding-plane ingress Queue Group for this interface.
Status: current Access: read-create
OBJECT-TYPE    
  TQosQGrpInstanceIDorZero  

vRtrDnsTableLastCh 1.3.6.1.4.1.6527.3.1.2.3.79
The value of the object vRtrDnsTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the vRtrDnsTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrDnsTable 1.3.6.1.4.1.6527.3.1.2.3.80
The vRtrDnsTable provides a sparse extension of the vRtrConfTable to configure DNS. Rows in this table are created and destroyed by means of SNMP set operations on the vRtrDnsRowStatus object.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrDnsEntry

vRtrDnsEntry 1.3.6.1.4.1.6527.3.1.2.3.80.1
Each row entry in the vRtrDnsTable represents DNS configuration of a specific virtual router instance. For some virtual router instances, such as the Base router instance, it is not allowed to create a row in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrDnsEntry  

vRtrDnsLastCh 1.3.6.1.4.1.6527.3.1.2.3.80.1.1
The value of vRtrDnsLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrDnsRowStatus 1.3.6.1.4.1.6527.3.1.2.3.80.1.2
The value of vRtrDnsRowStatus specifies the row status of this conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vRtrDnsAdminState 1.3.6.1.4.1.6527.3.1.2.3.80.1.3
The value of vRtrDnsAdminState specifies the administrative state of DNS in this virtual router instance.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxEnabledDisabled  

vRtrDnsPrimaryAddrType 1.3.6.1.4.1.6527.3.1.2.3.80.1.4
The value of vRtrDnsPrimaryAddrType specifies the address type of vRtrDnsPrimaryAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrDnsPrimaryAddr 1.3.6.1.4.1.6527.3.1.2.3.80.1.5
The value of vRtrDnsPrimaryAddr specifies the address of the primary DNS server in this virtual router instance.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrDnsSecondaryAddrType 1.3.6.1.4.1.6527.3.1.2.3.80.1.6
The value of vRtrDnsSecondaryAddrType specifies the address type of vRtrDnsSecondaryAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrDnsSecondaryAddr 1.3.6.1.4.1.6527.3.1.2.3.80.1.7
The value of vRtrDnsSecondaryAddr specifies the address of the secondary DNS server in this virtual router instance.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrDnsTertiaryAddrType 1.3.6.1.4.1.6527.3.1.2.3.80.1.8
The value of vRtrDnsTertiaryAddrType specifies the address type of vRtrDnsTertiaryAddr.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

vRtrDnsTertiaryAddr 1.3.6.1.4.1.6527.3.1.2.3.80.1.9
The value of vRtrDnsTertiaryAddr specifies the address of the tertiary DNS server in this virtual router instance.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrDnsIpv4SourceAddr 1.3.6.1.4.1.6527.3.1.2.3.80.1.10
The value of vRtrDnsIpv4SourceAddr specifies the source address for communication with an IPv4 DNS server in this virtual router instance. The value of all zeroes specifies that no DNS IPv4 source address is configured.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv4  

vRtrDnsIpv6SourceAddr 1.3.6.1.4.1.6527.3.1.2.3.80.1.11
The value of vRtrDnsIpv6SourceAddr specifies the source address for communication with an IPv6 DNS server in this virtual router instance. The value of all zeroes specifies that no DNS IPv6 source address is configured.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6  

vRtrInetAllCidrRouteTnlExtTable 1.3.6.1.4.1.6527.3.1.2.3.81
The vRtrInetAllCidrRouteTnlExtTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB, by adding three indexes and displays only tunneled routes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrInetAllCidrRteTnlExtEntry

vRtrInetAllCidrRouteTnlExtEntry 1.3.6.1.4.1.6527.3.1.2.3.81.1
Each row entry in the vRtrInetAllCidrRouteTable represents an entry in the IP CIDR route table for the Alcatel-Lucent SROS series.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrInetAllCidrRteTnlExtEntry  

vRtrInetAllCidrRteTnlNxtHopType 1.3.6.1.4.1.6527.3.1.2.3.81.1.1
The value of vRtrInetAllCidrRteTnlNxtHopType indicates the type of next hop for this route.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxInetCidrNextHopType  

vRtrInetAllCidrRteTnlNxtHopOwner 1.3.6.1.4.1.6527.3.1.2.3.81.1.2
The value of vRtrInetAllCidrRteTnlNxtHopOwner indicates the owner of next hop for this route.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxInetCidrNextHopOwner  

vRtrInetAllCidrRteTnlNxtHopTnlId 1.3.6.1.4.1.6527.3.1.2.3.81.1.3
Additional table index provided to distinguish between multiple RSVP tunnel-ids to same destination with the same vRtrInetAllCidrRteTnlNxtHopType and vRtrInetAllCidrRteTnlNxtHopOwner.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrInetAllCidrRteTnlEnabledTime 1.3.6.1.4.1.6527.3.1.2.3.81.1.4
The vRtrInetAllCidrRteTnlEnabledTime variable indicates the sysUpTime value for this route entry.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfBfdSessExtTable 1.3.6.1.4.1.6527.3.1.2.3.92
The vRtrIfBfdSessExtTable table contains per BFD session statistics and operational settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRtrIfBfdSessExtEntry

vRtrIfBfdSessExtEntry 1.3.6.1.4.1.6527.3.1.2.3.92.1
Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD.
Status: current Access: not-accessible
OBJECT-TYPE    
  VRtrIfBfdSessExtEntry  

vRtrIfBfdSessExtLinkType 1.3.6.1.4.1.6527.3.1.2.3.92.1.1
The value of vRtrIfBfdSessExtLinkType indicates the link type of the BFD session.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER pointToPoint(0), head(1), tail(2), client(3), ccOnly(4), ccWithCv(5), microBfd(6)  

vRtrIfBfdSessExtRxInfoId 1.3.6.1.4.1.6527.3.1.2.3.92.1.2
The value of vRtrIfBfdSessExtRxInfoId indicates the incoming label id or port id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtLclAddrType 1.3.6.1.4.1.6527.3.1.2.3.92.1.3
The value of vRtrIfBfdSessExtLclAddrType indicates the address type in vRtrIfBfdSessExtLclAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrIfBfdSessExtLclAddr 1.3.6.1.4.1.6527.3.1.2.3.92.1.4
The value of vRtrIfBfdSessExtLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessExtLclAddrType.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

vRtrIfBfdSessExtRemAddrType 1.3.6.1.4.1.6527.3.1.2.3.92.1.5
The value of vRtrIfBfdSessExtRemAddrType indicates the address type in vRtrIfBfdSessExtRemAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

vRtrIfBfdSessExtRemAddr 1.3.6.1.4.1.6527.3.1.2.3.92.1.6
The value of vRtrIfBfdSessExtRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessExtRemAddrType.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16|20)  

vRtrIfBfdSessExtOperState 1.3.6.1.4.1.6527.3.1.2.3.92.1.7
The value of vRtrIfBfdSessExtOperState indicates the operational state of BFD on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxOperState  

vRtrIfBfdSessExtState 1.3.6.1.4.1.6527.3.1.2.3.92.1.8
The value of vRtrIfBfdSessExtState indicates the state of the BFD protocol on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adminDown(0), down(1), init(2), up(3)  

vRtrIfBfdSessExtOperFlags 1.3.6.1.4.1.6527.3.1.2.3.92.1.9
The value of vRtrIfBfdSessExtOperFlags indicates the reasons why a BFD session is not up.
Status: current Access: read-only
OBJECT-TYPE    
  BITS noProtocols(0), noHeartBeat(1), echoFailed(2), nbrSignalDown(3), fwdPlaneReset(4), pathDown(5), nbrAdminDown(6), adminClear(7), misConnDefect(8)  

vRtrIfBfdSessExtMesgRecv 1.3.6.1.4.1.6527.3.1.2.3.92.1.10
The value of vRtrIfBfdSessExtMesgRecv indicates the number of messages received in this session. This object is applicable if vRtrIfBfdSessExtType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessExtMesgSent 1.3.6.1.4.1.6527.3.1.2.3.92.1.11
The value of vRtrIfBfdSessExtMesgSent indicates the number of messages sent in this session. This object is applicable if vRtrIfBfdSessExtType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessExtLastDownTime 1.3.6.1.4.1.6527.3.1.2.3.92.1.12
The value of vRtrIfBfdSessExtLastDownTime indicates the system time when this session last went down.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfBfdSessExtLastUpTime 1.3.6.1.4.1.6527.3.1.2.3.92.1.13
The value of vRtrIfBfdSessExtLastUpTime indicates the system time when this session last came up.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

vRtrIfBfdSessExtUpCount 1.3.6.1.4.1.6527.3.1.2.3.92.1.14
The value of vRtrIfBfdSessExtUpCount indicates the number of times vRtrIfBfdSessExtOperState changed from 'outOfService' to 'inService'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessExtDownCount 1.3.6.1.4.1.6527.3.1.2.3.92.1.15
The value of vRtrIfBfdSessExtDownCount indicates the number of times vRtrIfBfdSessExtOperState changed from 'inService' to 'outOfService'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessExtLclDisc 1.3.6.1.4.1.6527.3.1.2.3.92.1.16
The value of vRtrIfBfdSessExtLclDisc indicates the unique local discriminator for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtRemDisc 1.3.6.1.4.1.6527.3.1.2.3.92.1.17
The value of vRtrIfBfdSessExtRemDisc indicates the remote discriminator for this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtProtocols 1.3.6.1.4.1.6527.3.1.2.3.92.1.18
The value of vRtrIfBfdSessExtProtocols indicates which protocols are using this BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  BITS ospfv2(0), pim(1), isis(2), staticRoute(3), mcRing(4), rsvp(5), bgp(6), vrrp(7), srrp(8), mcep(9), ldp(10), ipsecTunnel(11), ospfv3(12), mcIpsec(13), mcMobile(14), mplsTp(15), lag(16)  

vRtrIfBfdSessExtTxInterval 1.3.6.1.4.1.6527.3.1.2.3.92.1.19
The value of vRtrIfBfdSessExtTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdExtTransmitInterval' and the remote node's receive interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtRxInterval 1.3.6.1.4.1.6527.3.1.2.3.92.1.20
The value of vRtrIfBfdSessExtRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdExtReceiveInterval' and the remote node's transmit interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtType 1.3.6.1.4.1.6527.3.1.2.3.92.1.21
The value of vRtrIfBfdSessExtType indicates the termination of the BFD session, as follows: 'iom (1)' - termination on the IOM card main processor, 'cpm (2)' - termination on the CPM card main processor, 'cpmNp (3)' - termination on the CPM card Network Processor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER iom(1), cpm(2), cpmNp(3), iomHw(4)  

vRtrIfBfdSessExtVerMismatch 1.3.6.1.4.1.6527.3.1.2.3.92.1.22
The value of vRtrIfBfdSessExtVerMismatch indicates the number of version mismatch errors for the bfd session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vRtrIfBfdSessExtTimeSinceLastRx 1.3.6.1.4.1.6527.3.1.2.3.92.1.23
The value of vRtrIfBfdSessExtTimeSinceLastRx indicates the number of milliseconds elapsed since the most recent message was received on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessExtType equal to 'cpmNp(3)'. Otherwise, zero is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtTimeSinceLastTx 1.3.6.1.4.1.6527.3.1.2.3.92.1.24
The value of vRtrIfBfdSessExtTimeSinceLastTx indicates the number of milliseconds elapsed since the most recent message was transmitted on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessExtType equal to 'cpmNp(3)'. Otherwise, zero is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtRemoteLspNum 1.3.6.1.4.1.6527.3.1.2.3.92.1.25
The value of vRtrIfBfdSessExtRemoteLspNum specifies the MPLS-TP LSP destination path number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtRemoteTunnelNum 1.3.6.1.4.1.6527.3.1.2.3.92.1.26
The value of vRtrIfBfdSessExtRemoteTunnelNum indicates the destination tunnel id for the MPLS-TP path.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtRemoteNodeId 1.3.6.1.4.1.6527.3.1.2.3.92.1.27
The value of vRtrIfBfdSessExtRemoteNodeId specifies the destination node id of an MPLS-TP LSP.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsTpNodeID  

vRtrIfBfdSessExtRemoteGlobalId 1.3.6.1.4.1.6527.3.1.2.3.92.1.28
The value of vRtrIfBfdSessExtRemoteGlobalId specifies the global identifier for an MPLS-TP LSP.
Status: current Access: read-only
OBJECT-TYPE    
  TmnxMplsTpGlobalID  

vRtrIfBfdSessExtLspPathTunnelId 1.3.6.1.4.1.6527.3.1.2.3.92.1.29
The value of vRtrIfBfdSessExtLspPathTunnelId indicates the source tunnel id for the MPLS-TP path.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

vRtrIfBfdSessExtLspPathId 1.3.6.1.4.1.6527.3.1.2.3.92.1.30
The value of vRtrIfBfdSessExtLspPathId indicates the source path index for the MPLS-TP LSP path. notApplicable (0) - Indicates vRtrIfBfdSessExtLinkType is neither 'ccOnly' or 'ccWithCv'. working (1) - A working path is the primary path for the LSP. protecting (2) - A protection path is the secondary path for the LSP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), working(1), protecting(2)  

tmnxVRtrNotificationObjects 1.3.6.1.4.1.6527.3.1.2.3.21
OBJECT IDENTIFIER    

vRtrAutoFilterDHCPClientAddress 1.3.6.1.4.1.6527.3.1.2.3.21.1
The Client IP address from the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the client's IP address.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

vRtrAutoFilterDHCPClientLease 1.3.6.1.4.1.6527.3.1.2.3.21.2
The lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

vRtrDHCPClientLease 1.3.6.1.4.1.6527.3.1.2.3.21.3
The value of the object vRtrDHCPClientLease indicates the lease time specified in the PDU causing the trap.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

vRtrDhcpLseStateOldCiAddr 1.3.6.1.4.1.6527.3.1.2.3.21.4
The value of the object vRtrDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

vRtrDhcpLseStateOldChAddr 1.3.6.1.4.1.6527.3.1.2.3.21.5
The value of the object vRtrDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

vRtrDhcpLseStateNewCiAddr 1.3.6.1.4.1.6527.3.1.2.3.21.6
The value of the object vRtrDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

vRtrDhcpLseStateNewChAddr 1.3.6.1.4.1.6527.3.1.2.3.21.7
The value of the object vRtrDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

vRtrDhcpRestoreLseStateCiAddr 1.3.6.1.4.1.6527.3.1.2.3.21.8
The value of the object vRtrDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

vRtrDhcpRestoreLseStateVRtrId 1.3.6.1.4.1.6527.3.1.2.3.21.9
The value of the object vRtrDhcpRestoreLseStateVRtrId indicates the serviceId specified in the persistency record causing the trap.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  TmnxVRtrID  

vRtrDhcpRestoreLseStateIfIndex 1.3.6.1.4.1.6527.3.1.2.3.21.10
The value of the object vRtrDhcpRestoreLseStateIfIndex indicates the Port ID specified in the persistency record causing the trap.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  InterfaceIndex  

vRtrDhcpRestoreLseStateProblem 1.3.6.1.4.1.6527.3.1.2.3.21.11
The value of the object vRtrDhcpRestoreLseStateProblem indicates why the persisency record cannot be restored.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

vRtrDhcpPacketProblem 1.3.6.1.4.1.6527.3.1.2.3.21.12
The value of the object vRtrDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

vRtrDhcpLseStatePopulateError 1.3.6.1.4.1.6527.3.1.2.3.21.13
The value of the object vRtrDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease state table with the information contained in the received DHCP ACK message.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

vRtrBfdSlotNumber 1.3.6.1.4.1.6527.3.1.2.3.21.14
The value of vRtrBfdSlotNumber indicates the IOM slot number where the number of supported BFD sessions has reached the maximum value. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TmnxSlotNum  

vRtrNumberOfBfdSessionsOnSlot 1.3.6.1.4.1.6527.3.1.2.3.21.15
The value of vRtrNumberOfBfdSessionsOnSlot indicates the current number of BFD sessions on the slot indicated by vRtrBfdSlotNumber. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

vRtrBfdMaxSessionReason 1.3.6.1.4.1.6527.3.1.2.3.21.16
The value of vRtrBfdMaxSessionReason indicates the reason the maximum numbers of sessions on this IOM slot was reached. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  BITS maxSessionsPerSlot(0), maxTxPacketRate(1), maxRxPacketRate(2), noSupportConfTimers(3)  

vRtrDHCP6ServerNetAddrType 1.3.6.1.4.1.6527.3.1.2.3.21.17
The value of the object vRtrDHCP6ServerNetAddrType indicates the address type of vRtrDHCP6ServerNetAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrDHCP6ServerNetAddr 1.3.6.1.4.1.6527.3.1.2.3.21.18
The value of the object vRtrDHCP6ServerNetAddr indicates the IP address of the DHCP server.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

vRtrDHCP6ClientNetAddrType 1.3.6.1.4.1.6527.3.1.2.3.21.19
The value of the object vRtrDHCP6ClientNetAddrType indicates the address type of vRtrDHCP6ClientNetAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrDHCP6ClientNetAddr 1.3.6.1.4.1.6527.3.1.2.3.21.20
The value of the object vRtrDHCP6ClientNetAddr indicates the IP address of the DHCP client.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

vRtrDHCP6AssignedNetAddrType 1.3.6.1.4.1.6527.3.1.2.3.21.21
The value of the object vRtrDHCP6AssignedNetAddrType indicates the address type of vRtrDHCP6AssignedNetAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrDHCP6AssignedNetAddr 1.3.6.1.4.1.6527.3.1.2.3.21.22
The value of the object vRtrDHCP6AssignedNetAddr indicates the IP address assigned to the DHCP client.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

vRtrDHCP6AssignedPrefixLen 1.3.6.1.4.1.6527.3.1.2.3.21.23
The value of vRtrDHCP6AssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6AssignedNetAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrDHCP6OldAssignedNetAddrType 1.3.6.1.4.1.6527.3.1.2.3.21.24
The value of the object vRtrDHCP6OldAssignedNetAddrType indicates the address type of vRtrDHCP6OldAssignedNetAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrDHCP6OldAssignedNetAddr 1.3.6.1.4.1.6527.3.1.2.3.21.25
The value of the object vRtrDHCP6OldAssignedNetAddr indicates the IP address formerly assigned to the DHCP client.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

vRtrDHCP6OldAssignedPrefixLen 1.3.6.1.4.1.6527.3.1.2.3.21.26
The value of vRtrDHCP6OldAssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6OldAssignedNetAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrDHCP6NewClientId 1.3.6.1.4.1.6527.3.1.2.3.21.27
The value of vRtrDHCP6NewClientId indicates the new DHCP6 clients unique identifier (DUID).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

vRtrDHCP6OldClientId 1.3.6.1.4.1.6527.3.1.2.3.21.28
The value of vRtrDHCP6OldClientId indicates the old DHCP6 clients unique identifier (DUID).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

vRtrDHCP6LeaseOverrideResult 1.3.6.1.4.1.6527.3.1.2.3.21.29
The value of the object vRtrDHCP6LeaseOverrideResult indicates whether or not the lease state has been overridden.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

vRtrInetStatRteCpeNotifyAddrType 1.3.6.1.4.1.6527.3.1.2.3.21.30
The value of the object vRtrInetStatRteCpeNotifyAddrType indicates the address type of vRtrInetStatRteCpeNotifyAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrInetStatRteCpeNotifyAddr 1.3.6.1.4.1.6527.3.1.2.3.21.31
The value of the object vRtrInetStatRteCpeNotifyAddr indicates the IP address of the CPE.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

vRtrInetStaticRouteCpeStatus 1.3.6.1.4.1.6527.3.1.2.3.21.32
The value of the object vRtrInetStaticRouteCpeStatus indicates whether or not the CPE associated with a static route is 'reachable' or 'unreachable'.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER reachable(0), unreachable(1)  

vRtrManagedRouteInetAddrType 1.3.6.1.4.1.6527.3.1.2.3.21.33
The value of vRtrManagedRouteInetAddrType indicates the address type of vRtrManagedRouteInetAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrManagedRouteInetAddr 1.3.6.1.4.1.6527.3.1.2.3.21.34
The value of vRtrManagedRouteInetAddr indicates the IP address of the managed route.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4)  

vRtrManagedRoutePrefixLen 1.3.6.1.4.1.6527.3.1.2.3.21.35
The value of vRtrManagedRoutePrefixLen indicates the prefix length of the subnet associated with vRtrManagedRouteInetAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressPrefixLength  

vRtrFailureDescription 1.3.6.1.4.1.6527.3.1.2.3.21.36
The value of the object vRtrFailureDescription is a printable character string which contains information about the reason why the notification is sent.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

vRtrMaxRoutesType 1.3.6.1.4.1.6527.3.1.2.3.21.37
The value of the object vRtrMaxRoutesType indicates the type of the maximum number of routes indicated by vRtrMaxNumRoutes
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER ipv4(0), ipv6(1)  

vRtrSlotOrCpmFlag 1.3.6.1.4.1.6527.3.1.2.3.21.38
The value of the object vRtrSlotOrCpmFlag indicates slot, when we have IOM based sessions and CPM when the sessions are centralised.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER slot(0), cpm(1)  

vRtrNotifInetAddrType 1.3.6.1.4.1.6527.3.1.2.3.21.39
The value of vRtrNotifInetAddrType indicates the address type of vRtrNotifInetAddr.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

vRtrNotifInetAddr 1.3.6.1.4.1.6527.3.1.2.3.21.40
The value of vRtrNotifInetAddr indicates an IP address.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

vRtrIfBfdSessChangedProtocol 1.3.6.1.4.1.6527.3.1.2.3.21.41
The value of the object vRtrIfBfdSessChangedProtocol indicates the protocol that changed the state in BFD.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

vRtrIfBfdSessProtoChngdState 1.3.6.1.4.1.6527.3.1.2.3.21.42
The value of the object vRtrIfBfdSessProtoChngdState indicates the changed state of vRtrIfBfdSessChangedProtocol in BFD.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER added(0), cleared(1)  

tmnxVRtrMidRouteTCA 1.3.6.1.4.1.6527.3.1.3.3.0.1
The tmnxVRtrMidRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrHighRouteTCA 1.3.6.1.4.1.6527.3.1.3.3.0.2
The tmnxVRtrHighRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrHighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrHighRouteCleared 1.3.6.1.4.1.6527.3.1.3.3.0.3
The tmnxVRtrHighRouteCleared notification is generated when the number of routes contained in a VPRN has dropped below the vRtrHighRouteThreshold value following the generation of a tmnxVRtrHighRouteTCA notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrIllegalLabelTCA 1.3.6.1.4.1.6527.3.1.3.3.0.4
The tmnxVRtrIllegalLabelTCA notification is generated when the number of illegal label violations on a VRF has exceeded the value specified by vRtrIllegalLabelThreshold.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrMcastMidRouteTCA 1.3.6.1.4.1.6527.3.1.3.3.0.5
The tmnxVRtrMcastMidRouteTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMcastMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrMcastMaxRoutesTCA 1.3.6.1.4.1.6527.3.1.3.3.0.6
The tmnxVRtrMcastMaxRoutesTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMaxMcastNumRoutes. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrMcastMaxRoutesCleared 1.3.6.1.4.1.6527.3.1.3.3.0.7
The tmnxVRtrMcastMaxRoutesCleared notification is generated when the number of multicast routes contained in a VPRN has dropped below the vRtrMaxMcastNumRoutes value following the generation of a tmnxVRtrMcastMaxRoutesTCA notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrMaxArpEntriesTCA 1.3.6.1.4.1.6527.3.1.3.3.0.8
The tmnxVRtrMaxArpEntriesTCA notification is generated when the number of ARP entries in a VPRN exceeds the maximum supported.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrMaxArpEntriesCleared 1.3.6.1.4.1.6527.3.1.3.3.0.9
The tmnxVRtrMaxArpEntriesCleared notification is generated when the number of ARP entries contained in a VPRN has dropped below the maximum value following the generation of a tmnxVRtrMaxArpEntriesTCA notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCPAFEntriesExceeded 1.3.6.1.4.1.6527.3.1.3.3.0.10
The tmnxVRtrDHCPAFEntriesExceeded notification is generated when the number of DHCP 'AutoFilter' entries on a given interface reaches a user configurable upper limit given by vRtrIfDHCPAutoFilter.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrMaxRoutes 1.3.6.1.4.1.6527.3.1.3.3.0.11
The tmnxVRtrMaxRoutes notification is generated when the number of routes of type vRtrMaxRoutesType contained in a VPRN reaches the value specified by vRtrMaxNumRoutes.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCPLseStsExceeded 1.3.6.1.4.1.6527.3.1.3.3.0.12
The tmnxVRtrDHCPLseStsExceeded notification is generated when the number of DHCP lease states entries on a given interface reaches a user configurable upper limit.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCPLeaseStateOverride 1.3.6.1.4.1.6527.3.1.3.3.0.13
The tmnxVRtrDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCPSuspiciousPcktRcvd 1.3.6.1.4.1.6527.3.1.3.3.0.14
The tmnxVRtrDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCPLseStRestoreProblem 1.3.6.1.4.1.6527.3.1.3.3.0.15
The tmnxVRtrDHCPLseStRestoreProblem notification is generated when an an error is detected while processing a persistency record.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCPLseStatePopulateErr 1.3.6.1.4.1.6527.3.1.3.3.0.16
The tmnxVRtrDHCPLseStatePopulateErr notification indicates that the system was unable to update the Lease State Table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdSessionDown 1.3.6.1.4.1.6527.3.1.3.3.0.17
The tmnxVRtrBfdSessionDown notification is generated when a BFD session goes down.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdMaxSessionOnSlot 1.3.6.1.4.1.6527.3.1.3.3.0.18
The tmnxVRtrBfdMaxSessionOnSlot notification is generated when the maximum number of BFD sessions has been reached on the slot indicated in 'vRtrBfdSlotNumber'. When we have IOM based sessions, vRtrSlotOrCpmFlag is set to 'slot' and when the sessions are centralised it is set to 'cpm'.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdPortTypeNotSupported 1.3.6.1.4.1.6527.3.1.3.3.0.19
The tmnxVRtrBfdPortTypeNotSupported notification is generated when BFD is not supported on the port specified in 'tmnxPortNotifyPortId'.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCPIfLseStatesExceeded 1.3.6.1.4.1.6527.3.1.3.3.0.20
The tmnxVRtrDHCPIfLseStatesExceeded notifications is generated when the number of lease states on an interface exceeds vRtrIfDHCPLeasePopulate.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCP6RelayLseStExceeded 1.3.6.1.4.1.6527.3.1.3.3.0.21
The tmnxVRtrDHCP6RelayLseStExceeded notifications is generated when the number of lease states populated by dhcp6 relay on an interface exceeds vRtrIfDHCP6LeasePopulate.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCP6ServerLseStExceeded 1.3.6.1.4.1.6527.3.1.3.3.0.22
The tmnxVRtrDHCP6ServerLseStExceeded notifications is generated when the number of lease states populated by dhcp6 server on an interface exceeds vRtrIfDHCP6ServerMaxLeaseStates.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCP6LseStateOverride 1.3.6.1.4.1.6527.3.1.3.3.0.23
The tmnxVRtrDHCP6LseStateOverride notifications is generated when an existing DHCP6 lease state can be overridden by a new lease state. This is allowed if the new lease state has the same IP address but a different client id or mac address. This is not allowed if the new lease state has the same IP address but a different prefix length.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCP6RelayReplyStripUni 1.3.6.1.4.1.6527.3.1.3.3.0.24
The tmnxVRtrDHCP6RelayReplyStripUni notifications is generated when a unicast option is stripped from a message relayed from a server to a client in a relay reply message.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCP6IllegalClientAddr 1.3.6.1.4.1.6527.3.1.3.3.0.25
The tmnxVRtrDHCP6IllegalClientAddr notifications is generated when an incoming message is dropped because the client's source IP does not match the subnet of the incoming interface.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCP6AssignedIllegSubnet 1.3.6.1.4.1.6527.3.1.3.3.0.26
The tmnxVRtrDHCP6AssignedIllegSubnet notifications is generated when an IP address assigned to the client does not match the subnet of the interface.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrDHCP6ClientMacUnresolved 1.3.6.1.4.1.6527.3.1.3.3.0.27
The tmnxVRtrDHCP6ClientMacUnresolved notifications is generated when we receive a relay reply for a client, and the client's MAC address has not been resolved yet.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdSessionUp 1.3.6.1.4.1.6527.3.1.3.3.0.28
The tmnxVRtrBfdSessionUp notification is generated when a BFD session goes up.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrIPv6MidRouteTCA 1.3.6.1.4.1.6527.3.1.3.3.0.29
The tmnxVRtrIPv6MidRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6MidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrIPv6HighRouteTCA 1.3.6.1.4.1.6527.3.1.3.3.0.30
The tmnxVRtrIPv6HighRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6HighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrIPv6HighRouteCleared 1.3.6.1.4.1.6527.3.1.3.3.0.31
The tmnxVRtrIPv6HighRouteCleared notification is generated when the number of IPv6 routes contained in a VPRN has dropped below the vRtrIPv6HighRouteThreshold value following the generation of a tmnxVRtrIPv6HighRouteTCA notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrStaticRouteCPEStatus 1.3.6.1.4.1.6527.3.1.3.3.0.32
The tmnxVRtrStaticRouteCPEStatus notification is generated when a CPE associated with a static route, as specified by the vRtrInetStatRteCpeNotifyAddr object, becomes reachable or unreachable.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdSessionDeleted 1.3.6.1.4.1.6527.3.1.3.3.0.33
The tmnxVRtrBfdSessionDeleted notification is generated when a BFD session is deleted.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdSessionProtChange 1.3.6.1.4.1.6527.3.1.3.3.0.34
The tmnxVRtrBfdSessionProtChange notification is generated when there is a change in the list of protocols using the BFD session.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrManagedRouteAddFailed 1.3.6.1.4.1.6527.3.1.3.3.0.35
The tmnxVRtrManagedRouteAddFailed notification is generated when a managed route could not be installed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrFibOccupancyThreshold 1.3.6.1.4.1.6527.3.1.3.3.0.36
The tmnxVRtrFibOccupancyThreshold notification is generated when the FIB on an IOM card transitions between experiencing persistent normal and high occupancy.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrInetAddressAttachFailed 1.3.6.1.4.1.6527.3.1.3.3.0.37
The tmnxVRtrInetAddressAttachFailed notification is generated when an IP address could not be attached to an interface. The reason is indicated in the failure description. A possible cause is that the maximum number of IP addresses in the system is exceeded. If the IP address is a link-local address, the vRtrIfLinkLocalAddressState of the corresponding entry in the vRtrIfTable does not reach the state 'preferred'. If the IP address was configured by the user, the vRiaInetAddrState of the corresponding entry in the vRtrIpAddrTable does not reach the state 'preferred'. The IP address can also be a subnet router anycast address related to an IP address configured by the user (refer to RFC 4291 IPv6 Addressing Architecture, section 2.6.1 Anycast Addresses).
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrSingleSfmOverloadStateCh 1.3.6.1.4.1.6527.3.1.3.3.0.38
The notification tmnxVRtrSingleSfmOverloadStateCh is sent when IGP single-SFM-overload state of a virtual router instance changes.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrGrtExportLimitReached 1.3.6.1.4.1.6527.3.1.3.3.0.39
A tmnxVRtrGrtExportLimitReached notification is generated when the configured value of exported routes, vRtrGrtMaxExportRoutes, is reached. Additional routes would not be exported into the GRT from the route table.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrGrtRoutesExpLimitDropped 1.3.6.1.4.1.6527.3.1.3.3.0.40
A tmnxVRtrGrtRoutesExpLimitDropped notification is generated when the number of exported routes drops below the export limit, vRtrGrtMaxExportRoutes.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrIfLdpSyncTimerStart 1.3.6.1.4.1.6527.3.1.3.3.0.41
A tmnxVRtrIfLdpSyncTimerStart notification is generated when the LDP sync timer, vRtrIfLdpSyncTimer starts for this interface.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrIfLdpSyncTimerStop 1.3.6.1.4.1.6527.3.1.3.3.0.42
A tmnxVRtrIfLdpSyncTimerStart notification is generated when the LDP sync timer, vRtrIfLdpSyncTimer stops for this interface.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdNoCpmNpResources 1.3.6.1.4.1.6527.3.1.3.3.0.43
The tmnxVRtrBfdNoCpmNpResources notification is generated when a BFD session could not be established because the session requires a cpmNp session termination resource (see vRtrIfBfdExtType), and no cpmNp session termination resources are available.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrGrtV6ExportLimitReached 1.3.6.1.4.1.6527.3.1.3.3.0.44
[CAUSE] A tmnxVRtrGrtV6ExportLimitReached notification is generated when the configured value of exported routes, vRtrGrtMaxIpv6ExportRoutes, is reached. [EFFECT] Additional routes would not be exported into the GRT from the route table. [RECOVERY] The export policy and the value of vRtrGrtMaxIpv6ExportRoutes need to be changed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrGrtV6RoutesExpLimDropped 1.3.6.1.4.1.6527.3.1.3.3.0.45
[CAUSE] A tmnxVRtrGrtV6RoutesExpLimDropped notification is generated when the number of exported routes drops below the export limit, vRtrGrtMaxIpv6ExportRoutes. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdSessExtDown 1.3.6.1.4.1.6527.3.1.3.3.0.61
[CAUSE] The tmnxVRtrBfdSessExtDown notification is generated when a BFD session goes down. [EFFECT] The effect of this session going down is that it either takes down any protocol that is riding over top of it or it notifies them that the session has gone down. [RECOVERY] The session will automatically attempt to re-establish on it's own.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdSessExtUp 1.3.6.1.4.1.6527.3.1.3.3.0.62
[CAUSE] The tmnxVRtrBfdSessExtUp notification is generated when a BFD session goes up. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdSessExtDeleted 1.3.6.1.4.1.6527.3.1.3.3.0.63
[CAUSE] The tmnxVRtrBfdSessExtDeleted notification is generated when a BFD session is deleted. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdSessExtProtChange 1.3.6.1.4.1.6527.3.1.3.3.0.64
[CAUSE] The tmnxVRtrBfdSessExtProtChange notification is generated when there is a change in the list of protocols using the BFD session. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrBfdExtNoCpmNpResources 1.3.6.1.4.1.6527.3.1.3.3.0.65
[CAUSE] The tmnxVRtrBfdExtNoCpmNpResources notification is generated when a BFD session could not be established because the session requires a cpmNp session termination resource (see vRtrIfBfdExtType), and no cpmNp session termination resources are available. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

tmnxVRtrCompliances 1.3.6.1.4.1.6527.3.1.1.3.1
OBJECT IDENTIFIER    

tmnxVRtrGroups 1.3.6.1.4.1.6527.3.1.1.3.2
OBJECT IDENTIFIER    

tmnxVRtrMobGatewayCompliances 1.3.6.1.4.1.6527.3.1.1.3.3
OBJECT IDENTIFIER    

tmnxVRtrMobGatewayGroups 1.3.6.1.4.1.6527.3.1.1.3.4
OBJECT IDENTIFIER    

tmnxVRtr7450V4v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.4
The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R4.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr7750V4v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.5
The compliance statement for management of VRTR instances on Alcatel-Lucent 7750 SR series systems release R4.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr7450V5v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.6
The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R5.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr7750V5v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.7
The compliance statement for management of VRTR instances on Alcatel-Lucent 7750 SR series systems release R5.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr7450V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.8
The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R6.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr77x0V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.9
The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R6.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr7450V6v1Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.10
The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R6.1.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr77x0V6v1Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.11
The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R6.1.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr7450V7v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.12
The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R7.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr77x0V7v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.13
The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R7.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr7450V8v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.14
The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R8.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr77x0V8v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.15
The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R8.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr7450V9v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.16
The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R9.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr77x0V9v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.17
The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R9.0.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtr77x0V10v0Compliance 1.3.6.1.4.1.6527.3.1.1.3.1.18
The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R10.0.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

tmnxVRtrGlobalR2r1Group 1.3.6.1.4.1.6527.3.1.1.3.2.10
The group of objects supporting management of general capabilities for transport and virtual routers on version 2.1 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfSubscrAuthV3v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.11
The group of objects supporting management of DHCP authentication on version 3.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrV4v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.14
The group of objects supporting management of transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfV4v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.15
The group of objects supporting management of virtual interfaces on version 4.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIpV4v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.16
The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrObsoletedObjectsV4v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.17
The group of objects no longer supported in version 4.0 of Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrBfdV4v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.18
The group of objects supporting Bi-directional Forwarding Detection on version 4.0 Alcatel 7x50 series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationV4v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.19
The group of notifications supporting the transport and virtual router capabilities on version 4.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxVRtrIPv6IfV4v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.20
The group of objects supporting management of IPv6 virtual interfaces on version 4.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIPv6V4v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.21
The group of objects supporting management of IPv6 transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIPv6IpV4v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.22
The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrObsoleteNotificationGroup 1.3.6.1.4.1.6527.3.1.1.3.2.23
The group of obsolete notifications for the transport and virtual router capabilities on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxVRtrIPv6IpV5v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.24
The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 5.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfV5v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.25
The group of objects supporting management of virtual interfaces on version 5.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIpV5v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.26
The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrV5v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.27
The group of objects supporting management of transport and virtual routers on version 5.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationV5v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.28
The group of notifications supporting the transport and virtual router capabilities on version 5.0 Alcatel 7xx0 SR series systems.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxVRtrObsoleteV5v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.29
The group of objects in TIMETRA-VRTR-MIB which are obsoleted in Alcatel-Lucent SROS 5.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationObjV5v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.30
The group of objects supporting management of notification objects on Alcatel-Lucent SROS 5.0 series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfDhcpServerGroup 1.3.6.1.4.1.6527.3.1.1.3.2.31
The group of objects supporting the DHCP server capabilities on version 6.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrV6v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.32
The group of objects supporting management of transport and virtual routers on version 6.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrStaticRteCPEChkV6v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.33
The group of objects supporting the Static Route CPE Check capability on version 6.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfIpcpV6v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.34
The group of objects supporting management of IPCP extensions for virtual interfaces on version 6.0 Alcatel 7x50 SR series systems
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfCpmProtectGroup 1.3.6.1.4.1.6527.3.1.1.3.2.35
The group of objects supporting management of CPM Protection for virtual interfaces on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxDscpAppV6v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.36
The group of objects supporting management of DSCP marking for self-generated protocol control traffic on Alcatel-Lucent SROS series systems release 6.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfDHCPRelayGroup 1.3.6.1.4.1.6527.3.1.1.3.2.37
The group of objects supporting management of DHCP Relay on virtual interfaces on version 6.0 Alcatel-Lucent SROS series systems
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrGlobalV6v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.38
The group of objects supporting management of general capabilities for transport and virtual routers on version 6.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationObjV6v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.39
The group of objects supporting management of notification objects on Alcatel-Lucent SROS 6.0 series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationV6v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.40
The group of notifications supporting the transport and virtual router capabilities on version 6.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxVRtrBfdV6v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.41
The group of objects supporting Bi-directional Forwarding Detection on version 6.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrV6v1Group 1.3.6.1.4.1.6527.3.1.1.3.2.42
The group of objects supporting new functionality on version 6.1 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIPv6MgtIfV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.43
The group of objects supporting management of IPv6 on the the management interface on version 7.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrFibStatsV6v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.44
The group of objects supporting FIB summary counts on version 6.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrInetAllCidrRouteV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.45
The group of objects supporting FIB summary counts on version 7.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrInetStaticRouteV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.46
The group of objects supporting the Conditional Route Policy capability on version 7.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrFibStatsV6v1Group 1.3.6.1.4.1.6527.3.1.1.3.2.47
The group of objects supporting FIB summary counts on version 6.1 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationV6v1Group 1.3.6.1.4.1.6527.3.1.1.3.2.48
The group of notifications supporting the transport and virtual router capabilities on version 6.1 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxVRtruRPFV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.49
The group of objects supporting unicast RPF feature on version 7.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrMvpnV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.50
The group of objects supporting Multicast VPN (MVPN) on version 7.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.51
The group of additional router interface objects supported on version 7.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIpV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.52
The group of objects supporting management of IP capabilities for transport and virtual routers on version 7.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.53
The group of objects supporting management of transport and virtual routers on version 7.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrObsoleteV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.54
The group of objects in TIMETRA-VRTR-MIB which are obsoleted in Alcatel-Lucent SROS 7.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfDHCPRelayV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.55
The group of objects supporting management of DHCP Relay on virtual interfaces on version 7.0 Alcatel-Lucent SROS series systems
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrBfdV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.56
The group of objects supporting Bi-directional Forwarding Detection add in version 7.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfDHCPRelayV6v1Group 1.3.6.1.4.1.6527.3.1.1.3.2.57
The group of objects supporting management of DHCP Relay on virtual interfaces on version 6.1 Alcatel-Lucent SROS series systems
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationObjV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.58
The group of objects supporting management of notification objects on Alcatel-Lucent SROS 7.0 series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationV7v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.59
The group of notifications supporting the transport and virtual router capabilities on version 7.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxVRtrV8v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.60
The group of objects supporting management of transport and virtual routers new on version 8.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfDHCPRelayV8v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.61
The group of objects supporting management of DHCP Relay on virtual interfaces on version 8.0 Alcatel-Lucent SROS series systems
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNetDomainGroup 1.3.6.1.4.1.6527.3.1.1.3.2.62
The group of objects supporting network-domain optimization for Ingress SAP Queue allocation in version 8.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationV8v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.63
The group of notifications supporting the transport and virtual router capabilities on version 8.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxVRtrObsoleteV8v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.64
The group of objects in TIMETRA-VRTR-MIB which are obsoleted in Alcatel-Lucent SROS 8.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrTunIntV8v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.65
The group of objects supporting management of tunnel interface for implementation of P2MP-LSP on Alcatel-Lucent SROS 8.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrBfdV8v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.66
The group of objects supporting Bi-directional Forwarding Detection added in release 8.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrMvpnPmsiV8v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.67
The group of objects supporting management of Mvpn added in release 8.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrFibStatsV8v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.68
The group of objects supporting FIB summary counts on version 8.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrV9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.69
The group of new objects supporting management of transport and virtual routers new on version 9.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfDHCP6V9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.70
The group of new objects supporting management of DHCPv6 on version 9.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrQPPBV9v0R4Group 1.3.6.1.4.1.6527.3.1.1.3.2.71
The group of objects supporting QoS policy propagation using BGP in release 9.0 R4 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrBfdV9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.72
The group of objects supporting Bi-directional Forwarding Detection on version 9.0 Alcatel-Lucent SROS series systems.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIpPoolGroup 1.3.6.1.4.1.6527.3.1.1.3.4.1
The group of objects supporting management of IP pools on Alcatel 7x50 SR series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfIpReasV9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.73
The group of objects supporting IP Reassembly on version 9.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfStatsV9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.74
The group of objects supporting IP Reassembly on version 9.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationObjV8v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.75
The group of objects supporting management of notification objects on Alcatel-Lucent SROS 8.0 series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfDHCPRelayV9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.76
The group of objects supporting management of DHCP Relay on virtual interfaces on version 9.0 Alcatel-Lucent SROS series systems
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNatRedGroup 1.3.6.1.4.1.6527.3.1.1.3.2.77
The group of objects supporting management of NAT redundancy on Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfV9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.78
The group of objects supporting management of router interfaces on Alcatel-Lucent SROS series systems in 9.0 release.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrMSPwV9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.79
The group of new objects supporting management of virtual router dynamic multi-segement pseudo-wire features new on version 9.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrMvpnSrcRedV9v0R4Group 1.3.6.1.4.1.6527.3.1.1.3.2.80
The group of objects supporting management of MVPN source redundancy on version 9.0R4 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrObsoletedBfdV9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.81
The group of objects obsoleted supporting Bi-directional Forwarding Detection on version 9.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrStatV9v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.82
The group of objects supporting management of statistics on version 9.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtruRPFV10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.83
The group of objects supporting management of router interfaces on Alcatel-Lucent SROS series systems in 10.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrPolicyGroup 1.3.6.1.4.1.6527.3.1.1.3.2.84
The group of objects supporting management of transport and virtual routers on Alcatel-Lucent SROS series systems in 10.0 release.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfDHCP6V10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.85
The group of new objects supporting management of DHCPv6 since version 10.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrGlobalV10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.86
The group of objects supporting management of additional features on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrQosQGrplV10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.87
The group of objects supporting management of QoS queue groups on Alcatel-Lucent SROS series systems release 10.0.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrStatV10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.88
The group of objects supporting management of statistics on version 10.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfObsoletedV10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.89
The group of objects obsoleted in version 10.0 of Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrV10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.90
The group of objects supporting management of transport and virtual routers in Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrIfV10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.91
The group of objects supporting management of virtual interfaces on version 10.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tmnxVRtrNotificationV10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.92
The group of notifications supporting the transport and virtual router capabilities on version 10.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tmnxVRtrGrtLocalMgmtV10v0Group 1.3.6.1.4.1.6527.3.1.1.3.2.93
The group of objects supporting management of virtual interfaces on version 10.0 Alcatel-Lucent SROS series systems.
Status: current Access: accessible-for-notify
OBJECT-GROUP