TPLINK-VOICEVLAN-MIB

File: TPLINK-VOICEVLAN-MIB.mib (10081 bytes)

Imported modules

TPLINK-TC-MIB SNMPv2-SMI TPLINK-MIB
RFC1213-MIB

Imported symbols

TPRowStatus OBJECT-TYPE MODULE-IDENTITY
tplinkMgmt ifIndex

Defined Types

VOICEVLANPORTENTRY  
SEQUENCE    
  voiceVlanPortNumber OCTET STRING
  voiceVlanPortMode INTEGER
  voiceVlanPortSecurity INTEGER
  voiceVlanPortStatus INTEGER
  voiceVlanPortLag OCTET STRING

VOICEVLANOUICONFIGENTRY  
SEQUENCE    
  voiceVlanOui OCTET STRING
  voiceVlanOuiMask OCTET STRING
  voiceVlanDescription OCTET STRING
  voiceVlanRowStatus TPRowStatus

Defined Values

tplinkVoiceVlanMIB 1.3.6.1.4.1.11863.6.19
Private MIB for voice vlan configuration.
MODULE-IDENTITY    

tplinkVoiceVlanMIBObjects 1.3.6.1.4.1.11863.6.19.1
OBJECT IDENTIFIER    

tplinkVoiceVlanMIBNotifications 1.3.6.1.4.1.11863.6.19.2
OBJECT IDENTIFIER    

voiceVlanGlobalConfig 1.3.6.1.4.1.11863.6.19.1.1
OBJECT IDENTIFIER    

voiceVlanGlobalEnable 1.3.6.1.4.1.11863.6.19.1.1.1
Select Enable/Disable Voice VLAN function. 0. disable 1. enable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

voiceVlanId 1.3.6.1.4.1.11863.6.19.1.1.2
Enter the VLAN ID of the voice VLAN,2-4094.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..4094  

voiceVlanAgingTime 1.3.6.1.4.1.11863.6.19.1.1.3
Specifies the living time of the member port in auto mode after the OUI address is aging out,1-43200 minute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

voiceVlanPriority 1.3.6.1.4.1.11863.6.19.1.1.4
Select the priority of the port when sending voice data. 0. Cos0 1. Cos1 2. Cos2 3. Cos3 4. Cos4 5. Cos5 6. Cos6 7. Cos7
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cos0(0), cos1(1), cos2(2), cos3(3), cos4(4), cos5(5), cos6(6), cos7(7)  

voiceVlanPortConfig 1.3.6.1.4.1.11863.6.19.1.2
OBJECT IDENTIFIER    

voiceVlanPortTable 1.3.6.1.4.1.11863.6.19.1.2.1
Here you can configure the parameters of the ports in the voice VLAN..
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VOICEVLANPORTENTRY

voiceVlanPortEntry 1.3.6.1.4.1.11863.6.19.1.2.1.1
An entry contains of the information of port param.
Status: current Access: not-accessible
OBJECT-TYPE    
  VOICEVLANPORTENTRY  

voiceVlanPortNumber 1.3.6.1.4.1.11863.6.19.1.2.1.1.1
Displays the port number of the Switch.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

voiceVlanPortMode 1.3.6.1.4.1.11863.6.19.1.2.1.1.2
Select the mode for the port to join the voice VLAN. 0. manual: In this mode, you can manually add a port to the voice VLAN or remove a port from the voice VLAN 1. auto: In this mode, the switch automatically adds a port to the voice VLAN or removes a port from the voice VLAN by checking whether the port receives voice data or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER manual(0), auto(1)  

voiceVlanPortSecurity 1.3.6.1.4.1.11863.6.19.1.2.1.1.3
Configure the security mode for forwarding packets. 0. disable:All packets are forwarded. 1. enable:Only voice data are forwarded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

voiceVlanPortStatus 1.3.6.1.4.1.11863.6.19.1.2.1.1.4
Displays the state of the port in the current voice VLAN. 0. inactive 1. active
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

voiceVlanPortLag 1.3.6.1.4.1.11863.6.19.1.2.1.1.5
Displays the LAG number which the port belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

voiceVlanOuiConfig 1.3.6.1.4.1.11863.6.19.1.3
OBJECT IDENTIFIER    

voiceVlanOuiConfigTable 1.3.6.1.4.1.11863.6.19.1.3.1
The switch determines whether a received packet is a voice packet by checking its source MAC address. If the source MAC addresses of packets comply with the OUI (organizationally unique identifier) addresses configured by the system, the packets are recognized as voice packets and transmitted in voice VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VOICEVLANOUICONFIGENTRY

voiceVlanOuiConfigEntry 1.3.6.1.4.1.11863.6.19.1.3.1.1
An entry contains of the information of a voice vlan oui.
Status: current Access: not-accessible
OBJECT-TYPE    
  VOICEVLANOUICONFIGENTRY  

voiceVlanOui 1.3.6.1.4.1.11863.6.19.1.3.1.1.1
Enter the OUI address of the voice device.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

voiceVlanOuiMask 1.3.6.1.4.1.11863.6.19.1.3.1.1.2
Enter the OUI address mask of the voice device.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

voiceVlanDescription 1.3.6.1.4.1.11863.6.19.1.3.1.1.3
Give a description to the OUI for identification,1-16 characters.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

voiceVlanRowStatus 1.3.6.1.4.1.11863.6.19.1.3.1.1.4
the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
Status: current Access: read-create
OBJECT-TYPE    
  TPRowStatus