TRANGO-P5M-MIB

File: TRANGO-P5M-MIB.mib (19422 bytes)

Imported modules

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	OBJECT-IDENTITY
Unsigned32	Opaque	IpAddress
Counter32	NOTIFICATION-TYPE	enterprises
NOTIFICATION-GROUP	MODULE-COMPLIANCE

Defined Types

DisplayString
OCTET STRING

ChannelTableEntry
SEQUENCE
	rfChannelTableIndex	INTEGER
	rfChannelFrequency	INTEGER

BandTableEntry
SEQUENCE
	rfBandTableIndex	INTEGER
	rfBandRangeMin	INTEGER
	rfBandRangeMax	INTEGER
	rfBandEnable	INTEGER
	rfBandTxPowerMin	INTEGER
	rfBandTxPowerMaxCCK	INTEGER
	rfBandTxPowerMaxBPSK	INTEGER
	rfBandTxPowerMaxQPSK	INTEGER
	rfBandTxPowerMax16QAM	INTEGER
	rfBandTxPowerMax64QAM	INTEGER

TrapTrapDstEntry
SEQUENCE
	trapTrapDstIndex	INTEGER
	trapTrapDstEnabling	INTEGER

Defined Values

trango		1.3.6.1.4.1.5454
OBJECT IDENTIFIER

tbw		1.3.6.1.4.1.5454.1
OBJECT IDENTIFIER

trangoModules		1.3.6.1.4.1.5454.10
OBJECT IDENTIFIER

trangoP5M		1.3.6.1.4.1.5454.10.10
The Trango SNMP General MIB Module for Atlas Point to Point P5M
MODULE-IDENTITY

p5m		1.3.6.1.4.1.5454.1.40
OBJECT IDENTIFIER

sys		1.3.6.1.4.1.5454.1.40.1
OBJECT IDENTIFIER

ver		1.3.6.1.4.1.5454.1.40.1.1
OBJECT IDENTIFIER

verUintType		1.3.6.1.4.1.5454.1.40.1.1.1
MU/RU
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mu(1), ru(0)

verHW		1.3.6.1.4.1.5454.1.40.1.1.2
Hardware Version
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

verFW		1.3.6.1.4.1.5454.1.40.1.1.3
Main firmware version HD
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

sysMAC		1.3.6.1.4.1.5454.1.40.1.2
MAC Address
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

sysDefaultOpmode		1.3.6.1.4.1.5454.1.40.1.3
Default Opmode
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(0)

sysCurrentOpmode		1.3.6.1.4.1.5454.1.40.1.4
Current Opmode
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(0)

sysActivateOpmode		1.3.6.1.4.1.5454.1.40.1.5
Turn on opmode
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deactivated(0), activated(1)

sysReadCommStr		1.3.6.1.4.1.5454.1.40.1.6
SNMP agent read community string. It is used for authentication purpose.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

sysWriteCommStr		1.3.6.1.4.1.5454.1.40.1.7
SNMP agent write community string. It is used for authentication purpose.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

syssw		1.3.6.1.4.1.5454.1.40.1.8
OBJECT IDENTIFIER

sysswTftpServerEnable		1.3.6.1.4.1.5454.1.40.1.8.1
Enable or disable to receive code or fileset download.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sysswAutoRateShiftingEnable		1.3.6.1.4.1.5454.1.40.1.8.2
Switch to different speed rate automatically to get the maximum throughput value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sysswAutoScanMUSignal		1.3.6.1.4.1.5454.1.40.1.8.3
Remote unit scans to all channel frequencies to listen to its master's heart-beat (RU Only).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sysswRSSILEDFlashEnable		1.3.6.1.4.1.5454.1.40.1.8.4
Enabling RSSI LED to blink based on its current RSSI value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sysswARQEnable		1.3.6.1.4.1.5454.1.40.1.8.8
ARQ Enable (MU Only)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

systraffic		1.3.6.1.4.1.5454.1.40.1.9
OBJECT IDENTIFIER

systrafficEthInOctets		1.3.6.1.4.1.5454.1.40.1.9.1
Number of payload octets received on Ethernet port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

systrafficEthOutOctets		1.3.6.1.4.1.5454.1.40.1.9.2
Number of payload octets transmitted on Ethernet port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

systrafficRfInOctets		1.3.6.1.4.1.5454.1.40.1.9.3
Number of octets of remote's payload received from RF port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

systrafficRfOutOctets		1.3.6.1.4.1.5454.1.40.1.9.4
Number of octets of remote's payload transmitted to RF port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

sysReserved1		1.3.6.1.4.1.5454.1.40.1.11
Save system setting values to Flash and activate the settings. Not supported in this release.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	no(0), yes(1)

sysReboot		1.3.6.1.4.1.5454.1.40.1.12
Reboot the master unit.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deactivated(0), activated(1)

sysipconfig		1.3.6.1.4.1.5454.1.40.1.13
OBJECT IDENTIFIER

sysipconfigIpAddress		1.3.6.1.4.1.5454.1.40.1.13.1
IP address
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sysipconfigSubnet		1.3.6.1.4.1.5454.1.40.1.13.2
Subnet mask
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sysipconfigDefaultGateway		1.3.6.1.4.1.5454.1.40.1.13.3
Default gateway
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

sysipconfigChange		1.3.6.1.4.1.5454.1.40.1.13.4
New IP Address, Subnet Mask and Default Gateway xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

sysRemarks		1.3.6.1.4.1.5454.1.40.1.14
Remarks
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

sysEncryptEnable		1.3.6.1.4.1.5454.1.40.1.15
Enable/Disable Encrypt
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

sysEncryptKey		1.3.6.1.4.1.5454.1.40.1.16
Encrypt Key
Status: current	Access: read-write
OBJECT-TYPE
	Opaque	Size(16)

rf		1.3.6.1.4.1.5454.1.40.2
OBJECT IDENTIFIER

rfPeerDeviceID		1.3.6.1.4.1.5454.1.40.2.1
Device ID of Remote Unit
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

rfActiveChannel		1.3.6.1.4.1.5454.1.40.2.2
It specifies the current active channel number.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..24

rfActivePolarization		1.3.6.1.4.1.5454.1.40.2.3
It specifies the current polarization.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1)

rfSpeed		1.3.6.1.4.1.5454.1.40.2.4
It specifies the rf speed.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	6 \| 12 \| 18 \| 24 \| 36 \| 48 \| 54

rfTxPower		1.3.6.1.4.1.5454.1.40.2.5
It specifies tx power. And it will be limited by Min/Max by different band
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-30..40

rfTxMIR		1.3.6.1.4.1.5454.1.40.2.6
Max Tx Information Rate in Kbps
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	100..50000

rfNumberOfChannel		1.3.6.1.4.1.5454.1.40.2.7
number of Channel
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..24

rfChannelTable		1.3.6.1.4.1.5454.1.40.2.8
Channel Table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ChannelTableEntry

rfChannelTableEntry		1.3.6.1.4.1.5454.1.40.2.8.1
An entry of Channel Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ChannelTableEntry

rfChannelTableIndex		1.3.6.1.4.1.5454.1.40.2.8.1.1
index of Channel Table
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..24

rfChannelFrequency		1.3.6.1.4.1.5454.1.40.2.8.1.2
Frequency (MHz)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5150..5875

rfAreaCode		1.3.6.1.4.1.5454.1.40.2.9
area code which specify band regulatory
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rfBandTable		1.3.6.1.4.1.5454.1.40.2.10
4 Band Tables
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		BandTableEntry

rfBandTableEntry		1.3.6.1.4.1.5454.1.40.2.10.1
An entry of Band Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	BandTableEntry

rfBandTableIndex		1.3.6.1.4.1.5454.1.40.2.10.1.1
index of Band Table
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

rfBandRangeMin		1.3.6.1.4.1.5454.1.40.2.10.1.2
Min Frequency of Band
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rfBandRangeMax		1.3.6.1.4.1.5454.1.40.2.10.1.3
Max Frequency of Band
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rfBandEnable		1.3.6.1.4.1.5454.1.40.2.10.1.4
Band availability
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

rfBandTxPowerMin		1.3.6.1.4.1.5454.1.40.2.10.1.5
Min Tx Power
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

rfBandTxPowerMaxCCK		1.3.6.1.4.1.5454.1.40.2.10.1.6
Max Tx Power for CCK
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

rfBandTxPowerMaxBPSK		1.3.6.1.4.1.5454.1.40.2.10.1.7
Max Tx Power for BPSK
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

rfBandTxPowerMaxQPSK		1.3.6.1.4.1.5454.1.40.2.10.1.8
Max Tx Power for QPSK
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

rfBandTxPowerMax16QAM		1.3.6.1.4.1.5454.1.40.2.10.1.9
Max Tx Power for 16 QAM
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

rfBandTxPowerMax64QAM		1.3.6.1.4.1.5454.1.40.2.10.1.10
Max Tx Power for 64 QAM
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

rfRSSI		1.3.6.1.4.1.5454.1.40.2.12
RSSI (in dBm).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-128..127

rfAssociated		1.3.6.1.4.1.5454.1.40.2.13
Association Status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no(0), yes(1)

ru		1.3.6.1.4.1.5454.1.40.3
OBJECT IDENTIFIER

ruReserved2		0.1
Perform Power Leveling RU. Not supported in this release.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deactivated(0), activated(1)

ruReserved3		0.2
Reboot RU. Not supported in this release.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	deactivated(0), activated(1)

ruReserved4		0.3
Distance of RU in mile. Not supported in this release.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

trap		1.3.6.1.4.1.5454.1.40.4
OBJECT IDENTIFIER

maintenance		1.3.6.1.4.1.5454.1.40.5
OBJECT IDENTIFIER

trangoEvents		1.3.6.1.4.1.5454.1.40.6
OBJECT IDENTIFIER

trangoEventsV2		1.3.6.1.4.1.5454.1.40.6.0
OBJECT IDENTIFIER

trapTrapDstTable		1.3.6.1.4.1.5454.1.40.4.1
This table allows control of the reporting of traps generated by monitoring the operation of master or remote.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TrapTrapDstEntry

trapTrapDstEntry		1.3.6.1.4.1.5454.1.40.4.1.1
Allows configuration of the reporting mechanisms for a particular event.
Status: current	Access: not-accessible
OBJECT-TYPE
	TrapTrapDstEntry

trapTrapDstIndex		1.3.6.1.4.1.5454.1.40.4.1.1.1
Event Index.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..2

trapTrapDstEnabling		1.3.6.1.4.1.5454.1.40.4.1.1.2
Enabled or Disabled sending trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

trapTrapDstIpAddress		1.3.6.1.4.1.5454.1.40.4.2
The IP Address of a management station to send traps to.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

trapTrapCommStr		1.3.6.1.4.1.5454.1.40.4.3
Trap community string.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

maintenanceLinkControl		1.3.6.1.4.1.5454.1.40.5.1
Link Test Summary Data.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..80)

maintenanceSiteSurveySummary1		1.3.6.1.4.1.5454.1.40.5.2
Site Survey Summary Data.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..128)

maintenanceServiceEnable		1.3.6.1.4.1.5454.1.40.5.3
Enable or disable system service.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	start(1), stop(2), changed(3), boareset(4)

maintenanceSiteSurveySummary2		1.3.6.1.4.1.5454.1.40.5.4
Site Survey Summary Data.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..128)

maintenanceSiteSurveySummary3		1.3.6.1.4.1.5454.1.40.5.5
Site Survey Summary Data.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..128)

maintenanceSiteSurveySummary4		1.3.6.1.4.1.5454.1.40.5.6
Site Survey Summary Data.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..128)

maintenanceSerialNumber		1.3.6.1.4.1.5454.1.40.5.7
Atlas Board Serial Number.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

maintenanceUNIIMaxPower		1.3.6.1.4.1.5454.1.40.5.8
UNII Maximum Power.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

masterEvent		1.3.6.1.4.1.5454.1.40.6.0.1
This notification signifies that the master unit generated a report.
Status: current	Access: read-write
NOTIFICATION-TYPE

remoteEvent		1.3.6.1.4.1.5454.1.40.6.0.2
This notification signifies that the remote unit generated a report.
Status: current	Access: read-write
NOTIFICATION-TYPE

trangoConf		1.3.6.1.4.1.5454.1.40.7
OBJECT IDENTIFIER

trangoGroups		1.3.6.1.4.1.5454.1.40.7.1
OBJECT IDENTIFIER

trangoCompl		1.3.6.1.4.1.5454.1.40.7.2
OBJECT IDENTIFIER

eventReportingGroupV2		1.3.6.1.4.1.5454.1.40.7.1.1
Notification group.
Status: current	Access: read-write
NOTIFICATION-GROUP

versionComplV2		1.3.6.1.4.1.5454.1.40.7.2.1
The implementation requirements for Trango products that support SNMP.
Status: current	Access: read-write
MODULE-COMPLIANCE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor