Telematics-Nevada-MIB

File: Telematics-Nevada-MIB.mib (975013 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises Counter Gauge
TimeTicks DisplayString OBJECT-TYPE
TRAP-TYPE

Defined Types

NvPortName  
DisplayString Size(0..10)    

NvPoolName  
DisplayString Size(0..10)    

NvNetAddress  
DisplayString Size(0..16)    

NvVisaType  
INTEGER undef(1), fxd1(2), fxd2(3), fxd3(4), fxd4(5), fxd5(6), fxd6(7), fxd7(8), fxd8(9), fxd9(10), fxd10(11), fxd11(12), fxd12(13), fxd13(14), fxd14(15), fxd15(16), fxd16(17), fxd17(18), fxd18(19), fxd19(20), fxd20(21), fxd21(22), fxd22(23), fxd23(24), fxd24(25), fxd25(26), fxd26(27), fxd27(28), fxd28(29), fxd29(30), fxd30(31), fxd31(32), fxd32(33), varfs(102)    

NvIsoType  
INTEGER unused(1), fxb1(2), fxb2(3), fxb3(4), fxb4(5), fxb5(6), fxb6(7), fxb7(8), fxb8(9), fxb9(10), fxb10(11), fxb11(12), fxb12(13), fxb13(14), fxb14(15), fxb15(16), fxb16(17), fxb17(18), fxb18(19), fxb19(20), fxb20(21), fxb21(22), fxb22(23), fxb23(24), fxb24(25), fxb25(26), fxb26(27), fxb27(28), fxb28(29), fxb29(30), fxb30(31), fxb31(32), fxb32(33), fxb33(34), fxb34(35), fxb35(36), fxb36(37), fxb37(38), fxb38(39), fxb39(40), fxb40(41), fxb41(42), fxb42(43), fxn1(102), fxn2(103), fxn3(104), fxn4(105), fxn5(106), fxn6(107), fxn7(108), fxn8(109), fxn9(110), fxn10(111), fxn11(112), fxn12(113), fxn13(114), fxn14(115), fxn15(116), fxn16(117), fxn17(118), fxn18(119), fxn19(120), fxn20(121), fxn21(122), fxn22(123), fxn23(124), fxn24(125), fxn25(126), fxn26(127), fxn27(128), fxn28(129), fxn29(130), fxn30(131), fxn31(132), fxn32(133), fxn33(134), fxn34(135), fxn35(136), fxn36(137), fxn37(138), fxn38(139), fxn39(140), fxn40(141), fxn41(142), fxn42(143), llbyte(202), lllbyte(204), llnibble(222), lllnibble(224)    

NvNodeconfEntry  
SEQUENCE    
  nvNodeconfIndex INTEGER
  nvNodeconfPartnum DisplayString
  nvNodeconfDbversion DisplayString
  nvNodeconfSwdate DisplayString
  nvNodeconfSwversion DisplayString
  nvNodeconfCalarms INTEGER
  nvNodeconfStartup INTEGER
  nvNodeconfSwtype INTEGER
  nvNodeconfX25call INTEGER
  nvNodeconfAcctrec INTEGER
  nvNodeconfAlarmrec INTEGER
  nvNodeconfBusyout INTEGER
  nvNodeconfRate1 INTEGER
  nvNodeconfRate2 INTEGER
  nvNodeconfRate3 INTEGER
  nvNodeconfRate4 INTEGER
  nvNodeconfNodeid INTEGER
  nvNodeconfExstat INTEGER
  nvNodeconfRsttimer INTEGER
  nvNodeconfChgreqid INTEGER
  nvNodeconfClksrc1 DisplayString
  nvNodeconfClksrc2 DisplayString
  nvNodeconfClksrc3 DisplayString
  nvNodeconfDsprfail INTEGER
  nvNodeconfFrmrfail INTEGER
  nvNodeconfQdlifail INTEGER

NvAcctstatEntry  
SEQUENCE    
  nvAcctstatComponent DisplayString
  nvAcctstatCallid INTEGER
  nvAcctstatRecord INTEGER
  nvAcctstatCalled DisplayString
  nvAcctstatCalling DisplayString
  nvAcctstatRecorg INTEGER
  nvAcctstatSegsize INTEGER
  nvAcctstatInfofunc INTEGER
  nvAcctstatDay INTEGER
  nvAcctstatMinute INTEGER
  nvAcctstatSecond INTEGER
  nvAcctstatTxpaks Counter
  nvAcctstat64ktxpaks Counter
  nvAcctstatRxpaks Counter
  nvAcctstat64krxpaks Counter
  nvAcctstatTxchars Counter
  nvAcctstat64ktxchars Counter
  nvAcctstatRxchars Counter
  nvAcctstat64krxchars Counter
  nvAcctstatTxsegs Counter
  nvAcctstat64ktxsegs Counter
  nvAcctstatRxsegs Counter
  nvAcctstat64krxsegs Counter
  nvAcctstatAbstime INTEGER
  nvAcctstatDtreset DisplayString

NvAcctoperEntry  
SEQUENCE    
  nvAcctoperIndex INTEGER
  nvAcctoperComponent DisplayString
  nvAcctoperEnable INTEGER
  nvAcctoperSegsize INTEGER

NvModemstatEntry  
SEQUENCE    
  nvModemstatIndex INTEGER
  nvModemstatName DisplayString
  nvModemstatState INTEGER
  nvModemstatRate INTEGER
  nvModemstatType INTEGER
  nvModemstatEctype INTEGER
  nvModemstatDctype INTEGER
  nvModemstatMode INTEGER
  nvModemstatRxparity INTEGER
  nvModemstatTxparity INTEGER
  nvModemstatAccms DisplayString
  nvModemstatMse INTEGER
  nvModemstatRcvlvl INTEGER
  nvModemstatRetrain INTEGER
  nvModemstatRenego INTEGER
  nvModemstatSelftest INTEGER
  nvModemstatFirmver DisplayString
  nvModemstatModel DisplayString
  nvModemstatRxpclear INTEGER
  nvModemstatDsp DisplayString
  nvModemstatDtreset DisplayString

NvModemconfEntry  
SEQUENCE    
  nvModemconfIndex INTEGER
  nvModemconfName DisplayString
  nvModemconfProfilename DisplayString
  nvModemconfEnable INTEGER
  nvModemconfStatus INTEGER

NvSymuserEntry  
SEQUENCE    
  nvSymuserIndex INTEGER
  nvSymuserUsername DisplayString
  nvSymuserPassword DisplayString
  nvSymuserStatus INTEGER

NvNmsuserEntry  
SEQUENCE    
  nvNmsuserIndex INTEGER
  nvNmsuserCalladdr DisplayString
  nvNmsuserCalldata DisplayString
  nvNmsuserPassword DisplayString
  nvNmsuserPsiz INTEGER
  nvNmsuserWsiz INTEGER
  nvNmsuserRpoacode INTEGER
  nvNmsuserOchrg INTEGER
  nvNmsuserCug INTEGER
  nvNmsuserTput INTEGER
  nvNmsuserNmsid DisplayString
  nvNmsuserStatus INTEGER

NvNetmapEntry  
SEQUENCE    
  nvNetmapIndex INTEGER
  nvNetmapNetaddr DisplayString
  nvNetmapUserdata DisplayString
  nvNetmapNodeid INTEGER
  nvNetmapStatus INTEGER

NvNetrouteEntry  
SEQUENCE    
  nvNetrouteIndex INTEGER
  nvNetrouteNodeid INTEGER
  nvNetrouteService DisplayString
  nvNetroutePrio INTEGER
  nvNetrouteStatus INTEGER

NvNetpvcEntry  
SEQUENCE    
  nvNetpvcIndex INTEGER
  nvNetpvcService DisplayString
  nvNetpvcPvcid INTEGER
  nvNetpvcPvccode INTEGER
  nvNetpvcPvcend INTEGER
  nvNetpvcStatus INTEGER

NvNetpvcmapEntry  
SEQUENCE    
  nvNetpvcmapIndex INTEGER
  nvNetpvcmapPvccode INTEGER
  nvNetpvcmapNodeid INTEGER
  nvNetpvcmapStatus INTEGER

NvNetconEntry  
SEQUENCE    
  nvNetconIndex INTEGER
  nvNetconSrccompid DisplayString
  nvNetconDstcompid DisplayString
  nvNetconCallingad DisplayString
  nvNetconCalledad DisplayString
  nvNetconConstate INTEGER
  nvNetconConid DisplayString
  nvNetconSrcid DisplayString
  nvNetconDstid DisplayString

NvRoutemapEntry  
SEQUENCE    
  nvRoutemapIndex INTEGER
  nvRoutemapAddrstr DisplayString
  nvRoutemapAddrtype INTEGER
  nvRoutemapNetaddr DisplayString
  nvRoutemapUserdata DisplayString
  nvRoutemapStatus INTEGER

NvMediastatEntry  
SEQUENCE    
  nvMediastatIndex INTEGER
  nvMediastatOrigimage INTEGER
  nvMediastatImage INTEGER
  nvMediastatDebug INTEGER
  nvMediastatImagechg INTEGER
  nvMediastatDump INTEGER
  nvMediastatImage1db DisplayString
  nvMediastatImage1sw DisplayString
  nvMediastatImage2db DisplayString
  nvMediastatImage2sw DisplayString
  nvMediastatMediasize INTEGER

NvTnnlconfEntry  
SEQUENCE    
  nvTnnlconfIndex INTEGER
  nvTnnlconfPortname DisplayString
  nvTnnlconfRsrcpool DisplayString
  nvTnnlconfLineprot INTEGER
  nvTnnlconfProt INTEGER
  nvTnnlconfRtmethod INTEGER
  nvTnnlconfNetaddr DisplayString
  nvTnnlconfUserdata DisplayString
  nvTnnlconfStatus INTEGER

NvTnnlstatEntry  
SEQUENCE    
  nvTnnlstatIndex INTEGER
  nvTnnlstatPortname DisplayString
  nvTnnlstatRsrcpool DisplayString
  nvTnnlstatConnstat INTEGER
  nvTnnlstatRtstring DisplayString
  nvTnnlstatNetaddr DisplayString
  nvTnnlstatUserdata DisplayString
  nvTnnlstatCallatts Counter
  nvTnnlstatCallattfs Counter
  nvTnnlstatInframes Counter
  nvTnnlstatOutframes Counter
  nvTnnlstatDtreset DisplayString

NvCDLIEntry  
SEQUENCE    
  nvCDLISlotIndex INTEGER
  nvCDLIPortIndex INTEGER
  nvCDLIName DisplayString
  nvCDLIFormat INTEGER
  nvCDLICode INTEGER
  nvCDLIFdl INTEGER
  nvCDLISignaling INTEGER
  nvCDLILineimp INTEGER
  nvCDLIEnable INTEGER
  nvCDLICsudsu INTEGER
  nvCDLIAtten INTEGER
  nvCDLIGain INTEGER
  nvCDLIDataInver INTEGER

NvSDLIEntry  
SEQUENCE    
  nvSDLISlotIndex INTEGER
  nvSDLIPortIndex INTEGER
  nvSDLISdlinm DisplayString
  nvSDLIDlitype DisplayString
  nvSDLICurstate INTEGER
  nvSDLIRedcnts Counter
  nvSDLIYelcnts Counter
  nvSDLIBlucnts Counter
  nvSDLIErrcnt Counter
  nvSDLITxundrun Counter
  nvSDLIRxfrmslp Counter
  nvSDLIDtreset DisplayString

NvUgconfEntry  
SEQUENCE    
  nvUgconfIndex INTEGER
  nvUgconfName DisplayString
  nvUgconfPool DisplayString
  nvUgconfNumrsrvd INTEGER
  nvUgconfThreshld INTEGER
  nvUgconfMaxbw INTEGER
  nvUgconfStatus INTEGER

NvUgstatEntry  
SEQUENCE    
  nvUgstatIndex INTEGER
  nvUgstatName DisplayString
  nvUgstatPool DisplayString
  nvUgstatNumused INTEGER
  nvUgstatBwused INTEGER
  nvUgstatBwrejs Counter
  nvUgstatUnavrejs Counter
  nvUgstatThresrejs Counter
  nvUgstatDtreset DisplayString

NvDrstatEntry  
SEQUENCE    
  nvDrstatIndex INTEGER
  nvDrstatName DisplayString
  nvDrstatClass INTEGER
  nvDrstatNumdev INTEGER
  nvDrstatNumrsrvd INTEGER
  nvDrstatNumavail INTEGER
  nvDrstatNumused INTEGER
  nvDrstatMaxused INTEGER
  nvDrstatDtreset DisplayString

NvCFRMREntry  
SEQUENCE    
  nvCFRMRSlotIndex INTEGER
  nvCFRMRPortIndex INTEGER
  nvCFRMRName DisplayString
  nvCFRMRRate INTEGER
  nvCFRMREIAtype INTEGER
  nvCFRMRClkmode INTEGER
  nvCFRMRDebounce INTEGER
  nvCFRMREnable INTEGER

NvSFRMREntry  
SEQUENCE    
  nvSFRMRSlotIndex INTEGER
  nvSFRMRPortIndex INTEGER
  nvSFRMRName DisplayString
  nvSFRMRMode INTEGER
  nvSFRMRState INTEGER
  nvSFRMRRate INTEGER
  nvSFRMRCid DisplayString
  nvSFRMRRxoff INTEGER
  nvSFRMRTxoff INTEGER
  nvSFRMRNrxoff INTEGER
  nvSFRMRNtxoff INTEGER
  nvSFRMRLostfrms Counter
  nvSFRMRFerrs INTEGER
  nvSFRMRPerrs INTEGER
  nvSFRMRRxovrs Counter
  nvSFRMRCrcerrs Counter
  nvSFRMRRxaborts Counter
  nvSFRMRDtreset DisplayString

NvSlotstatEntry  
SEQUENCE    
  nvSlotstatIndex INTEGER
  nvSlotstatName DisplayString
  nvSlotstatCardType INTEGER
  nvSlotstatIotype INTEGER
  nvSlotstatCpu INTEGER
  nvSlotstatRam DisplayString
  nvSlotstatStatus DisplayString
  nvSlotstatCardid DisplayString
  nvSlotstatHwRevision DisplayString
  nvSlotstatCatPartnum DisplayString
  nvSlotstatSrNumber DisplayString
  nvSlotstatProdChkDate DisplayString

NvCDSPEntry  
SEQUENCE    
  nvCDSPSlotIndex INTEGER
  nvCDSPPortIndex INTEGER
  nvCDSPName DisplayString
  nvCDSPEnable INTEGER
  nvCDSPNumfaicon INTEGER
  nvCDSPNumload INTEGER

NvSDSPEntry  
SEQUENCE    
  nvSDSPSlotIndex INTEGER
  nvSDSPPortIndex INTEGER
  nvSDSPName DisplayString
  nvSDSPState INTEGER
  nvSDSPNumfaicon INTEGER
  nvSDSPNumload INTEGER
  nvSDSPFailcaus INTEGER
  nvSDSPNumcalls Counter
  nvSDSPNumfnegs Counter
  nvSDSPDtreset DisplayString
  nvSDSPNumIncom Counter
  nvSDSPNumOutgo Counter
  nvSDSPNumIfailneg Counter
  nvSDSPNumOfailneg Counter
  nvSDSPEvent1 Counter
  nvSDSPEvent2 Counter
  nvSDSPEvent3 Counter
  nvSDSPEvent4 Counter
  nvSDSPEvent5 Counter
  nvSDSPEvent6 Counter
  nvSDSPEvent7 Counter
  nvSDSPEvent8 Counter
  nvSDSPEvent9 Counter
  nvSDSPEvent10 Counter
  nvSDSPEvent11 Counter
  nvSDSPEvent12 Counter

NvCrouteEntry  
SEQUENCE    
  nvCrouteIndex INTEGER
  nvCrouteAddr DisplayString
  nvCrouteRouting INTEGER
  nvCrouteType INTEGER
  nvCrouteVol1prot INTEGER
  nvCrouteVol1mode INTEGER
  nvCrouteBw INTEGER
  nvCrouteRcscp1 DisplayString
  nvCrouteRcscp2 DisplayString
  nvCrouteDialmapid INTEGER
  nvCrouteReserve1 DisplayString
  nvCrouteDirection INTEGER
  nvCrouteChoice INTEGER
  nvCrouteStatus INTEGER

NvCrcstatEntry  
SEQUENCE    
  nvCrcstatIndex INTEGER
  nvCrcstatCid INTEGER
  nvCrcstatState INTEGER
  nvCrcstatCallednum DisplayString
  nvCrcstatCallngnum DisplayString
  nvCrcstatCalledsub DisplayString
  nvCrcstatCallngsub DisplayString
  nvCrcstatRcsc0 DisplayString
  nvCrcstatDevice0 DisplayString
  nvCrcstatRcsc1 DisplayString
  nvCrcstatDevice1 DisplayString
  nvCrcstatRcsc2 DisplayString
  nvCrcstatDevice2 DisplayString
  nvCrcstatReserve1 DisplayString
  nvCrcstatReserve2 DisplayString
  nvCrcstatL1prot INTEGER
  nvCrcstatL1mode INTEGER
  nvCrcstatCroute INTEGER
  nvCrcstatRouting INTEGER
  nvCrcstatBw INTEGER
  nvCrcstatDirection INTEGER

NvCrfstatEntry  
SEQUENCE    
  nvCrfstatIndex INTEGER
  nvCrfstatCid INTEGER
  nvCrfstatCallednum DisplayString
  nvCrfstatCallngnum DisplayString
  nvCrfstatCalledsub DisplayString
  nvCrfstatCallngsub DisplayString
  nvCrfstatL1prot INTEGER
  nvCrfstatL1mode INTEGER
  nvCrfstatCroute INTEGER
  nvCrfstatRouting INTEGER
  nvCrfstatAddr DisplayString
  nvCrfstatCause INTEGER
  nvCrfstatRcsc0 DisplayString
  nvCrfstatRcsc1 DisplayString
  nvCrfstatRcsc2 DisplayString
  nvCrfstatReserve1 DisplayString
  nvCrfstatDirection INTEGER

NvRrstatEntry  
SEQUENCE    
  nvRrstatIndex INTEGER
  nvRrstatPoolname DisplayString
  nvRrstatClass INTEGER
  nvRrstatNumbers Counter
  nvRrstatConns Counter
  nvRrstatMaxcalls Counter
  nvRrstatNumIcalls Counter
  nvRrstatNumOcalls Counter
  nvRrstatNumcalls Counter
  nvRrstatAvgtime Counter
  nvRrstatDtreset DisplayString

NvModemprofEntry  
SEQUENCE    
  nvModemprofIndex INTEGER
  nvModemprofName DisplayString
  nvModemprofRsrcpool DisplayString
  nvModemprofDspname DisplayString
  nvModemprofType INTEGER
  nvModemprofEc INTEGER
  nvModemprofDc INTEGER
  nvModemprofMode INTEGER
  nvModemprofCmpdtype INTEGER
  nvModemprofTxlvl INTEGER
  nvModemprofRxthresh INTEGER
  nvModemprofAnston INTEGER
  nvModemprofAnstondur INTEGER
  nvModemprofBildly INTEGER
  nvModemprofStatus INTEGER
  nvModemprofFalbckchr INTEGER

NvIfStackInfoEntry  
SEQUENCE    
  nvIfStackInfoHigherLI INTEGER
  nvIfStackInfoLowerLI INTEGER
  nvIfStackInfoStatus INTEGER
  nvIfStackInfoRid INTEGER

NvDialmapEntry  
SEQUENCE    
  nvDialmapIndex INTEGER
  nvDialmapNumdelete INTEGER
  nvDialmapAddprefix DisplayString
  nvDialmapStatus INTEGER

NvDspmallocEntry  
SEQUENCE    
  nvDspmallocIndex INTEGER
  nvDspmallocDsptype INTEGER
  nvDspmallocWeight INTEGER
  nvDspmallocStatus INTEGER

NvDialstatEntry  
SEQUENCE    
  nvDialstatIndex INTEGER
  nvDialstatRcscpool DisplayString
  nvDialstatNcurrent INTEGER
  nvDialstatNcalling INTEGER
  nvDialstatTrace INTEGER
  nvDialstatLastAddr DisplayString
  nvDialstatLastCause INTEGER
  nvDialstatLastDiag INTEGER
  nvDialstatLastResponse DisplayString
  nvDialstatNdialout Counter
  nvDialstatNattempt Counter
  nvDialstatNsucceed Counter
  nvDialstatNfail Counter
  nvDialstatNcircfail Counter
  nvDialstatNcmderror Counter
  nvDialstatNdialtone Counter
  nvDialstatNbusy Counter
  nvDialstatNnoRoute Counter
  nvDialstatNnoModem Counter
  nvDialstatNnoInput Counter
  nvDialstatNinvnum Counter
  nvDialstatNnoAnswer Counter
  nvDialstatNmnegfail Counter
  nvDialstatNconnfail Counter
  nvDialstatNmiscfail Counter
  nvDialstatMaxcall Counter
  nvDialstatAdSucctim INTEGER
  nvDialstatAdFailtim INTEGER
  nvDialstatNabredial Counter

NvFrmrstatEntry  
SEQUENCE    
  nvFrmrstatSlotIndex INTEGER
  nvFrmrstatState INTEGER
  nvFrmrstatFailCause INTEGER
  nvFrmrstatResetTime DisplayString
  nvFrmrstatNumFailures INTEGER
  nvFrmrstatNumReloads INTEGER
  nvFrmrstatTotalCalls INTEGER
  nvFrmrstatCallsPresent INTEGER
  nvFrmrstatNumPortUp INTEGER
  nvFrmrstatNumFailUp INTEGER
  nvFrmrstatNumTxFrames INTEGER
  nvFrmrstatNumRxFrames INTEGER
  nvFrmrstatNumTxBytes INTEGER
  nvFrmrstatNumRxBytes INTEGER

NvFristatEntry  
SEQUENCE    
  nvFristatIndex INTEGER
  nvFristatPort DisplayString
  nvFristatOperstate INTEGER
  nvFristatLmistate INTEGER
  nvFristatCurseq INTEGER
  nvFristatRcvseq INTEGER
  nvFristatErrorcounts Counter
  nvFristatRxexceszes Counter
  nvFristatRxbaddlcis Counter
  nvFristatDtreset DisplayString

NvFrvcstatEntry  
SEQUENCE    
  nvFrvcstatIndex INTEGER
  nvFrvcstatService DisplayString
  nvFrvcstatServiceid DisplayString
  nvFrvcstatFri INTEGER
  nvFrvcstatDlci INTEGER
  nvFrvcstatStatus INTEGER
  nvFrvcstatTxcongstatus INTEGER
  nvFrvcstatRxbufdepletion Gauge
  nvFrvcstatOutputrate Gauge
  nvFrvcstatInputrate Gauge
  nvFrvcstatExcessdatas Counter
  nvFrvcstatTxframes Counter
  nvFrvcstatRxframes Counter
  nvFrvcstatDrprxs Counter
  nvFrvcstatDrprxdes Counter
  nvFrvcstatDtreset DisplayString

NvFriconfEntry  
SEQUENCE    
  nvFriconfIndex INTEGER
  nvFriconfPort DisplayString
  nvFriconfRsrcpool DisplayString
  nvFriconfMaxfrmsz INTEGER
  nvFriconfLmitype INTEGER
  nvFriconfMode INTEGER
  nvFriconfDlci INTEGER
  nvFriconfnT1 INTEGER
  nvFriconfnT2 INTEGER
  nvFriconfnT3 INTEGER
  nvFriconfnN1 INTEGER
  nvFriconfnN2 INTEGER
  nvFriconfnN3 INTEGER
  nvFriconfnN4 INTEGER
  nvFriconfnP1 INTEGER
  nvFriconfStatus INTEGER

NvFrvcconfEntry  
SEQUENCE    
  nvFrvcconfIndex INTEGER
  nvFrvcconfDlci INTEGER
  nvFrvcconfFri INTEGER
  nvFrvcconfMappedpvc INTEGER
  nvFrvcconfEnable INTEGER
  nvFrvcconfT INTEGER
  nvFrvcconfBc INTEGER
  nvFrvcconfBe INTEGER
  nvFrvcconfN INTEGER
  nvFrvcconfRxbufspac INTEGER
  nvFrvcconfRxcgthres INTEGER
  nvFrvcconfRxcgclear INTEGER
  nvFrvcconfStatus INTEGER

NvIticstatEntry  
SEQUENCE    
  nvIticstatIndex INTEGER
  nvIticstatClassname DisplayString
  nvIticstatNnccs Counter
  nvIticstatNnfails Counter
  nvIticstatNpassfails Counter
  nvIticstatCurcalls Counter
  nvIticstatAvgtime Counter
  nvIticstatMaxcalls Counter
  nvIticstatNumcalls INTEGER
  nvIticstatDtreset DisplayString
  nvIticstatTcalls Counter
  nvIticstatN300bd Counter
  nvIticstatN1200bd Counter
  nvIticstatN2400bd Counter
  nvIticstatN9600bd Counter
  nvIticstatN14400bd Counter
  nvIticstatN28800bd Counter
  nvIticstatFailneg Counter
  nvIticstatTrmdscdat Counter
  nvIticstatLoscarsu Counter
  nvIticstatLoscarcip Counter
  nvIticstatLoscardat Counter
  nvIticstatTrmdscsu Counter
  nvIticstatTrmdsccip Counter
  nvIticstatNcurIncom Counter
  nvIticstatNcurOutgo Counter
  nvIticstatMaxIncom Counter
  nvIticstatMaxOutgo Counter
  nvIticstatNumIncom Counter
  nvIticstatNumOutgo Counter
  nvIticstatNncr Counter

NvItipstatEntry  
SEQUENCE    
  nvItipstatIndex INTEGER
  nvItipstatPortname DisplayString
  nvItipstatReserve1 DisplayString
  nvItipstatAcct DisplayString
  nvItipstatClassname DisplayString
  nvItipstatSrcadr DisplayString
  nvItipstatDstadr DisplayString
  nvItipstatTxPsze INTEGER
  nvItipstatRxPsze INTEGER
  nvItipstatTxWsze INTEGER
  nvItipstatRxWsze INTEGER
  nvItipstatTxTput INTEGER
  nvItipstatRxTput INTEGER
  nvItipstatCugtype INTEGER
  nvItipstatCug INTEGER
  nvItipstatRpoa INTEGER
  nvItipstatRevf INTEGER
  nvItipstatPrio INTEGER
  nvItipstatFast INTEGER
  nvItipstatPvc INTEGER
  nvItipstatNdcode INTEGER
  nvItipstatNddiag INTEGER
  nvItipstatNdorigin INTEGER
  nvItipstatNrcode INTEGER
  nvItipstatNrdiag INTEGER
  nvItipstatOrg INTEGER
  nvItipstatState INTEGER
  nvItipstatUserdata DisplayString
  nvItipstatUsername DisplayString
  nvItipstatX28type INTEGER
  nvItipstatX3type INTEGER
  nvItipstatReservet DisplayString
  nvItipstatNtccs Counter
  nvItipstatNnccs Counter
  nvItipstatNnfails Counter
  nvItipstatNtxpaks Counter
  nvItipstatNrxpaks Counter
  nvItipstatNtxresets Counter
  nvItipstatNrxresets Counter
  nvItipstatNctxpaks Counter
  nvItipstatNcrxpaks Counter
  nvItipstatNctxresets Counter
  nvItipstatNcrxresets Counter
  nvItipstatNinputs Counter
  nvItipstatNoutputs Counter
  nvItipstatParam DisplayString
  nvItipstatPreparam DisplayString
  nvItipstatDtreset DisplayString
  nvItipstatId DisplayString
  nvItipstatNtconn Counter
  nvItipstatNtdc Counter
  nvItipstatNncr Counter
  nvItipstatNtimeout Counter

NvItiustatEntry  
SEQUENCE    
  nvItiustatIndex INTEGER
  nvItiustatUsername DisplayString
  nvItiustatNcalls Counter
  nvItiustatNpassfails Counter
  nvItiustatNcallbacks Counter
  nvItiustatDuration TimeTicks
  nvItiustatNtxpaks Counter
  nvItiustatNrxpaks Counter
  nvItiustatDtreset DisplayString

NvDlspcstatEntry  
SEQUENCE    
  nvDlspcstatIndex INTEGER
  nvDlspcstatNports INTEGER
  nvDlspcstatNidle INTEGER

NvDuistatEntry  
SEQUENCE    
  nvDuistatIndex INTEGER
  nvDuistatType INTEGER
  nvDuistatNua DisplayString
  nvDuistatState INTEGER
  nvDuistatLink INTEGER
  nvDuistatLcn INTEGER
  nvDuistatLastcause INTEGER
  nvDuistatLastdiag INTEGER
  nvDuistatNmnxtcall INTEGER
  nvDuistatNretries Counter
  nvDuistatNrejects Counter
  nvDuistatNaccepts Counter
  nvDuistatNinvmsgs Counter
  nvDuistatNunxmsgs Counter
  nvDuistatDtreset DisplayString

NvItiportEntry  
SEQUENCE    
  nvItiportIndex INTEGER
  nvItiportName DisplayString
  nvItiportEnable INTEGER
  nvItiportIticlass DisplayString
  nvItiportFclevel INTEGER
  nvItiportMinbspace INTEGER
  nvItiportMaxbspace INTEGER
  nvItiportMode INTEGER
  nvItiportRsrcpool DisplayString
  nvItiportPortname DisplayString
  nvItiportTimer0 INTEGER
  nvItiportTimer1 INTEGER
  nvItiportTimer2 INTEGER

NvDportstatEntry  
SEQUENCE    
  nvDportstatIndex INTEGER
  nvDportstatPortname DisplayString
  nvDportstatSetstate INTEGER
  nvDportstatIntfstate INTEGER
  nvDportstatChstate INTEGER
  nvDportstatDuihost INTEGER
  nvDportstatDuistatus INTEGER
  nvDportstatPorttype INTEGER
  nvDportstatCli DisplayString
  nvDportstatResetdate DisplayString
  nvDportstatUptime TimeTicks
  nvDportstatDowntime TimeTicks
  nvDportstatSessions Counter
  nvDportstatIncalls Counter
  nvDportstatOutcalls Counter
  nvDportstatDtreset DisplayString

NvIticlassEntry  
SEQUENCE    
  nvIticlassIndex INTEGER
  nvIticlassClassname DisplayString
  nvIticlassAcctsigl INTEGER
  nvIticlassActonloss INTEGER
  nvIticlassBannerid INTEGER
  nvIticlassBreaksgnl INTEGER
  nvIticlassCalmethod INTEGER
  nvIticlassClasmsgid INTEGER
  nvIticlassClaspaswd DisplayString
  nvIticlassCmdtimout INTEGER
  nvIticlassCug INTEGER
  nvIticlassDatacmd INTEGER
  nvIticlassDefwsze INTEGER
  nvIticlassDefpsze INTEGER
  nvIticlassDevtype INTEGER
  nvIticlassExitcmd INTEGER
  nvIticlassFastsel INTEGER
  nvIticlassIchrg INTEGER
  nvIticlassInactivty INTEGER
  nvIticlassIncbar INTEGER
  nvIticlassInitcmd INTEGER
  nvIticlassMaskstrng INTEGER
  nvIticlassMaxpsze INTEGER
  nvIticlassMaxwsze INTEGER
  nvIticlassOchrg INTEGER
  nvIticlassOutbar INTEGER
  nvIticlassPrefixid INTEGER
  nvIticlassProfile DisplayString
  nvIticlassPromptid INTEGER
  nvIticlassPvcid INTEGER
  nvIticlassRejectid INTEGER
  nvIticlassRpoacode INTEGER
  nvIticlassRpoatype INTEGER
  nvIticlassSecurity INTEGER
  nvIticlassTermtype INTEGER
  nvIticlassX28type INTEGER
  nvIticlassX3type INTEGER
  nvIticlassXoffin INTEGER
  nvIticlassXoffout INTEGER
  nvIticlassXonin INTEGER
  nvIticlassXonout INTEGER
  nvIticlassTidprompt INTEGER
  nvIticlassStatus INTEGER
  nvIticlassEscchar INTEGER
  nvIticlassInvclrcmd INTEGER
  nvIticlassX29mskstr INTEGER
  nvIticlassDroptimer INTEGER
  nvIticlassClasmode INTEGER
  nvIticlassDialout INTEGER
  nvIticlassCallingid INTEGER
  nvIticlassAcctng INTEGER
  nvIticlassInvclrtim INTEGER
  nvIticlassComfac INTEGER

NvIticmdEntry  
SEQUENCE    
  nvIticmdIndex INTEGER
  nvIticmdCommand DisplayString
  nvIticmdClass DisplayString
  nvIticmdStringid INTEGER
  nvIticmdStatus INTEGER

NvIticonfEntry  
SEQUENCE    
  nvIticonfIndex INTEGER
  nvIticonfNumcopy INTEGER
  nvIticonfBroadcast INTEGER
  nvIticonfItiswitch INTEGER
  nvIticonfPadaddr DisplayString
  nvIticonfDnic INTEGER
  nvIticonfConfigstr INTEGER
  nvIticonfValserver INTEGER
  nvIticonfV120p11 INTEGER

NvItimapEntry  
SEQUENCE    
  nvItimapIndex INTEGER
  nvItimapNetaddr DisplayString
  nvItimapUserdata DisplayString
  nvItimapClass DisplayString
  nvItimapStatus INTEGER

NvItiprofEntry  
SEQUENCE    
  nvItiprofIndex INTEGER
  nvItiprofName DisplayString
  nvItiprofP1 INTEGER
  nvItiprofP2 INTEGER
  nvItiprofP3 INTEGER
  nvItiprofP4 INTEGER
  nvItiprofP5 INTEGER
  nvItiprofP6 INTEGER
  nvItiprofP7 INTEGER
  nvItiprofP8 INTEGER
  nvItiprofP9 INTEGER
  nvItiprofP10 INTEGER
  nvItiprofP11 INTEGER
  nvItiprofP12 INTEGER
  nvItiprofP13 INTEGER
  nvItiprofP14 INTEGER
  nvItiprofP15 INTEGER
  nvItiprofP16 INTEGER
  nvItiprofP17 INTEGER
  nvItiprofP18 INTEGER
  nvItiprofP19 INTEGER
  nvItiprofP20 INTEGER
  nvItiprofP21 INTEGER
  nvItiprofP22 INTEGER
  nvItiprofP23 INTEGER
  nvItiprofP24 INTEGER
  nvItiprofP25 INTEGER
  nvItiprofP26 INTEGER
  nvItiprofP27 INTEGER
  nvItiprofP28 INTEGER
  nvItiprofP29 INTEGER
  nvItiprofP30 INTEGER
  nvItiprofP31 INTEGER
  nvItiprofP32 INTEGER
  nvItiprofP33 INTEGER
  nvItiprofP34 INTEGER
  nvItiprofP35 INTEGER
  nvItiprofStatus INTEGER

NvItirpoaEntry  
SEQUENCE    
  nvItirpoaIndex INTEGER
  nvItirpoaCode INTEGER
  nvItirpoaCarrier DisplayString
  nvItirpoaStatus INTEGER

NvItiuserEntry  
SEQUENCE    
  nvItiuserIndex INTEGER
  nvItiuserUsername DisplayString
  nvItiuserCallback INTEGER
  nvItiuserClrestrct INTEGER
  nvItiuserInitcmd INTEGER
  nvItiuserUserclass DisplayString
  nvItiuserUserpaswd DisplayString
  nvItiuserNumber DisplayString
  nvItiuserStatus INTEGER

NvDuiconfEntry  
SEQUENCE    
  nvDuiconfIndex INTEGER
  nvDuiconfType INTEGER
  nvDuiconfNua DisplayString
  nvDuiconfCalling DisplayString
  nvDuiconfFirsttry INTEGER
  nvDuiconfRetrytime INTEGER
  nvDuiconfRetryinc INTEGER
  nvDuiconfStatus INTEGER

NvDlspcconfEntry  
SEQUENCE    
  nvDlspcconfIndex INTEGER
  nvDlspcconfNodename DisplayString
  nvDlspcconfSitename DisplayString
  nvDlspcconfHelpphone DisplayString
  nvDlspcconfAbortmsg INTEGER
  nvDlspcconfPidtable INTEGER
  nvDlspcconfPortalarm INTEGER
  nvDlspcconfStatus INTEGER

NvDlstatEntry  
SEQUENCE    
  nvDlstatIndex INTEGER
  nvDlstatLinkname INTEGER
  nvDlstatApp INTEGER
  nvDlstatLfrmr INTEGER
  nvDlstatLreset INTEGER
  nvDlstatMstate INTEGER
  nvDlstatProtocol INTEGER
  nvDlstatPstate INTEGER
  nvDlstatSstate INTEGER
  nvDlstatAbtfrxs Counter
  nvDlstatAlarms Counter
  nvDlstatFrmrrxs Counter
  nvDlstatFrmrtxs Counter
  nvDlstatIfrxs Counter
  nvDlstatIftxs Counter
  nvDlstatRejrxs Counter
  nvDlstatRejtxs Counter
  nvDlstatRnrrxs Counter
  nvDlstatRnrtxs Counter
  nvDlstatRrrxs Counter
  nvDlstatRrtxs Counter
  nvDlstatRxdds Counter
  nvDlstatTouts Counter
  nvDlstatTretrys Counter
  nvDlstatDtreset DisplayString

NvLinkstatEntry  
SEQUENCE    
  nvLinkstatIndex INTEGER
  nvLinkstatPort DisplayString
  nvLinkstatApp INTEGER
  nvLinkstatFstate INTEGER
  nvLinkstatLfrmr INTEGER
  nvLinkstatLreset INTEGER
  nvLinkstatN1 INTEGER
  nvLinkstatProtocol INTEGER
  nvLinkstatAbtfrxs Counter
  nvLinkstatAlarms Counter
  nvLinkstatFrmrrxs Counter
  nvLinkstatFrmrtxs Counter
  nvLinkstatIfrxs Counter
  nvLinkstatIftxs Counter
  nvLinkstatRejrxs Counter
  nvLinkstatRejtxs Counter
  nvLinkstatRnrrxs Counter
  nvLinkstatRnrtxs Counter
  nvLinkstatRrrxs Counter
  nvLinkstatRrtxs Counter
  nvLinkstatRxdds Counter
  nvLinkstatTouts Counter
  nvLinkstatTretrys Counter
  nvLinkstatTchartxs Counter
  nvLinkstatTcharrxs Counter
  nvLinkstatDtreset DisplayString
  nvLinkstatNlinkup Counter

NvDlconfEntry  
SEQUENCE    
  nvDlconfDlnumber INTEGER
  nvDlconfLinkname INTEGER
  nvDlconfPuaddr DisplayString

NvLinkconfEntry  
SEQUENCE    
  nvLinkconfIndex INTEGER
  nvLinkconfLinkname INTEGER
  nvLinkconfPortname DisplayString
  nvLinkconfRsrcpool DisplayString
  nvLinkconfProtocol INTEGER
  nvLinkconfWsze INTEGER
  nvLinkconfHostinact INTEGER
  nvLinkconfN2 INTEGER
  nvLinkconfPollthres INTEGER
  nvLinkconfT1 INTEGER
  nvLinkconfT2 INTEGER
  nvLinkconfT3 INTEGER
  nvLinkconfAckthresh INTEGER
  nvLinkconfDialout INTEGER
  nvLinkconfWaitframe INTEGER

NvX25statEntry  
SEQUENCE    
  nvX25statIndex DisplayString
  nvX25statNetname DisplayString
  nvX25statCode INTEGER
  nvX25statDiag INTEGER
  nvX25statIfstate INTEGER
  nvX25statCallcur INTEGER
  nvX25statOpen INTEGER
  nvX25statUp INTEGER
  nvX25statLinkup INTEGER
  nvX25statNtxcalls Counter
  nvX25statNrxcalls Counter
  nvX25statNtxcallcs Counter
  nvX25statNrxcallcs Counter
  nvX25statNtxclrs Counter
  nvX25statNrxclrs Counter
  nvX25statNtxclrcs Counter
  nvX25statNrxclrcs Counter
  nvX25statNtxres Counter
  nvX25statNrxres Counter
  nvX25statNtxints Counter
  nvX25statNrxints Counter
  nvX25statNtxrrs Counter
  nvX25statNrxrrs Counter
  nvX25statNtxrnrs Counter
  nvX25statNrxrnrs Counter
  nvX25statNtxpaks Counter
  nvX25statNrxpaks Counter
  nvX25statNtxsegs Counter
  nvX25statNrxsegs Counter
  nvX25statNtxchars Counter
  nvX25statNrxchars Counter
  nvX25statMaxvc INTEGER
  nvX25statDtreset DisplayString

NvX25callEntry  
SEQUENCE    
  nvX25callIndex INTEGER
  nvX25callNetname DisplayString
  nvX25callChanstate INTEGER
  nvX25callChantype INTEGER
  nvX25callCode INTEGER
  nvX25callDiag INTEGER
  nvX25callExpack INTEGER
  nvX25callLcn INTEGER
  nvX25callRxpsze INTEGER
  nvX25callRxwsze INTEGER
  nvX25callRxtput INTEGER
  nvX25callNr INTEGER
  nvX25callNrunak INTEGER
  nvX25callNs INTEGER
  nvX25callNsunak INTEGER
  nvX25callNunakpac INTEGER
  nvX25callTxpsze INTEGER
  nvX25callTxwsze INTEGER
  nvX25callTxtput INTEGER
  nvX25callNrxints Counter
  nvX25callNrxpaks Counter
  nvX25callNrxres Counter
  nvX25callNrxrnrs Counter
  nvX25callNrxrrs Counter
  nvX25callNrxsegs Counter
  nvX25callNtxints Counter
  nvX25callNtxpaks Counter
  nvX25callNtxsegs Counter
  nvX25callNtxres Counter
  nvX25callNtxrrs Counter
  nvX25callDtreset DisplayString

NvX25confEntry  
SEQUENCE    
  nvX25confIndex INTEGER
  nvX25confNetname DisplayString
  nvX25confApp INTEGER
  nvX25confAutostart INTEGER
  nvX25confDlnumber INTEGER
  nvX25confLic INTEGER
  nvX25confLoc INTEGER
  nvX25confLpc INTEGER
  nvX25confLtc INTEGER
  nvX25confNic INTEGER
  nvX25confNoc INTEGER
  nvX25confNpc INTEGER
  nvX25confNtc INTEGER
  nvX25confAcktimer INTEGER
  nvX25confAckthresh INTEGER
  nvX25confNuireq INTEGER
  nvX25confCugformat INTEGER
  nvX25confDbmod INTEGER
  nvX25confDefpsze INTEGER
  nvX25confDefwsze INTEGER
  nvX25confDeftput INTEGER
  nvX25confDiagsupr INTEGER
  nvX25confDirection INTEGER
  nvX25confFlowneg INTEGER
  nvX25confFstacc INTEGER
  nvX25confUpdncmd INTEGER
  nvX25confMaxpsze INTEGER
  nvX25confMaxwsze INTEGER
  nvX25confNetaddr DisplayString
  nvX25confNettype INTEGER
  nvX25confNetvrsion INTEGER
  nvX25confPktbuf INTEGER
  nvX25confStndbytim INTEGER
  nvX25confRevacc INTEGER
  nvX25confThruneg INTEGER
  nvX25confTx0 INTEGER
  nvX25confTx1 INTEGER
  nvX25confTx2 INTEGER
  nvX25confTx3 INTEGER
  nvX25confXtend INTEGER
  nvX25confNuirtg INTEGER
  nvX25confIsdnaddr INTEGER

NvX25nuimapEntry  
SEQUENCE    
  nvX25nuimapIndex INTEGER
  nvX25nuimapNui DisplayString
  nvX25nuimapCalled DisplayString
  nvX25nuimapStatus INTEGER

NvXbillconfEntry  
SEQUENCE    
  nvXbillconfIndex INTEGER
  nvXbillconfEnable INTEGER
  nvXbillconfSegsize INTEGER
  nvXbillconfBilltime INTEGER

NvXnuasetEntry  
SEQUENCE    
  nvXnuasetIndex INTEGER
  nvXnuasetSetname DisplayString
  nvXnuasetNua1 DisplayString
  nvXnuasetNua2 DisplayString
  nvXnuasetNua3 DisplayString
  nvXnuasetStatus INTEGER

NvXbillstatEntry  
SEQUENCE    
  nvXbillstatIndex INTEGER
  nvXbillstatNodeid INTEGER
  nvXbillstatDate DisplayString
  nvXbillstatTime DisplayString
  nvXbillstatNuaset DisplayString
  nvXbillstatDatarate DisplayString
  nvXbillstatTxseg Counter
  nvXbillstatRxseg Counter
  nvXbillstatRxcallc Counter
  nvXbillstatHostclr Counter
  nvXbillstatNetclr Counter
  nvXbillstatTxpak Counter
  nvXbillstatRxpak Counter
  nvXbillstatLess5 Counter
  nvXbillstat5to10 Counter
  nvXbillstat10to15 Counter
  nvXbillstat15to20 Counter
  nvXbillstatGrtr20 Counter
  nvXbillstatClosed INTEGER

NvPriconfEntry  
SEQUENCE    
  nvPriconfIndex INTEGER
  nvPriconfPriname INTEGER
  nvPriconfSwitch INTEGER
  nvPriconfDsltype INTEGER
  nvPriconfRouting INTEGER
  nvPriconfDliname DisplayString
  nvPriconfRsrcpool DisplayString
  nvPriconfStatus INTEGER
  nvPriconfBusyout INTEGER
  nvPriconfEstlink INTEGER
  nvPriconfDlirst INTEGER
  nvPriconfDchrst INTEGER
  nvPriconfNfasdch INTEGER
  nvPriconfNfasif INTEGER
  nvPriconfNfasgrp INTEGER
  nvPriconfTsshift INTEGER
  nvPriconfX25diags INTEGER
  nvPriconfNumbtype INTEGER
  nvPriconfNumbplan INTEGER
  nvPriconfModemcap INTEGER
  nvPriconfL1prot INTEGER
  nvPriconfStandby INTEGER

NvPristatEntry  
SEQUENCE    
  nvPristatIndex INTEGER
  nvPristatPriname INTEGER
  nvPristatStatus INTEGER
  nvPristatCallrecvs Counter
  nvPristatCallaceps Counter
  nvPristatCallrejs Counter
  nvPristatCallinrels Counter
  nvPristatCalloutrels Counter
  nvPristatEstreq Counter
  nvPristatDlirst Counter
  nvPristatDchrst Counter
  nvPristatCallcur Counter
  nvPristatDchanup Counter
  nvPristatDtreset DisplayString
  nvPristatNcurincom Counter
  nvPristatNcuroutgo Counter
  nvPristatNrxsetup Counter
  nvPristatMaxrsetup Counter
  nvPristatNrxsetupa Counter
  nvPristatNtxconn Counter
  nvPristatNtxbusy Counter
  nvPristatNtxsetup Counter
  nvPristatMaxtsetup Counter
  nvPristatNtxsetupa Counter
  nvPristatNrxconn Counter
  nvPristatNrxbusy Counter
  nvPristatNnoanswer Counter
  nvPristatMaxincom Counter
  nvPristatMaxoutgo Counter
  nvPristatCallsent Counter
  nvPristatCallconn Counter
  nvPristatCallfail Counter

NvPricstatEntry  
SEQUENCE    
  nvPricstatIndex INTEGER
  nvPricstatSeqno INTEGER
  nvPricstatCallid DisplayString
  nvPricstatRate DisplayString
  nvPricstatState INTEGER
  nvPricstatPriname INTEGER
  nvPricstatCalldir INTEGER
  nvPricstatContype INTEGER
  nvPricstatL1prot INTEGER
  nvPricstatCallingno DisplayString
  nvPricstatCalledno DisplayString
  nvPricstatBchanl DisplayString

NvPridstatEntry  
SEQUENCE    
  nvPridstatIndex INTEGER
  nvPridstatPriname INTEGER
  nvPridstatEventno INTEGER
  nvPridstatProtlayer INTEGER
  nvPridstatTime INTEGER
  nvPridstatDate INTEGER

NvPricuconfEntry  
SEQUENCE    
  nvPricuconfIndex INTEGER
  nvPricuconfThresh1 INTEGER
  nvPricuconfThresh2 INTEGER
  nvPricuconfThresh3 INTEGER
  nvPricuconfThresh4 INTEGER
  nvPricuconfInterval INTEGER
  nvPricuconfStatus INTEGER

NvPricustatEntry  
SEQUENCE    
  nvPricustatIndex INTEGER
  nvPricustatThresh1 INTEGER
  nvPricustatCounter1 INTEGER
  nvPricustatThresh2 INTEGER
  nvPricustatCounter2 INTEGER
  nvPricustatThresh3 INTEGER
  nvPricustatCounter3 INTEGER
  nvPricustatThresh4 INTEGER
  nvPricustatCounter4 INTEGER
  nvPricustatResettime DisplayString

NvPppstatEntry  
SEQUENCE    
  nvPppstatIndex INTEGER
  nvPppstatName DisplayString
  nvPppstatPppAdminS INTEGER
  nvPppstatLcpOperS INTEGER
  nvPppstatIpcpOperS INTEGER
  nvPppstatInOctets Counter
  nvPppstatInPkts Counter
  nvPppstatInDiscard Counter
  nvPppstatInError Counter
  nvPppstatInEch Counter
  nvPppstatInEchRp Counter
  nvPppstatInDiscRq Counter
  nvPppstatUnKnwnPr Counter
  nvPppstatOutOctets Counter
  nvPppstatOutPkts Counter
  nvPppstatOutDiscrd Counter
  nvPppstatOutErrors Counter
  nvPppstatOutEch Counter
  nvPppstatOutEchRp Counter
  nvPppstatOutDiscRq Counter
  nvPppstatCcpOperS INTEGER
  nvPppstatComprot INTEGER
  nvPppstatUserName DisplayString
  nvPppstatIpAddr DisplayString
  nvPppstatBundleId INTEGER
  nvPppstatIpcp INTEGER
  nvPppstatMultilink INTEGER
  nvPppstatTnnlState INTEGER
  nvPppstatTnnlId INTEGER
  nvPppstatCallId INTEGER
  nvPppstatOutCmPcnt Counter
  nvPppstatInCmPcnt Counter
  nvPppstatOutExpnds Counter
  nvPppstatDtreset DisplayString
  nvPppstatRealm DisplayString

NvLcpconfEntry  
SEQUENCE    
  nvLcpconfIndex INTEGER
  nvLcpconfPort DisplayString
  nvLcpconfRsrcpool DisplayString
  nvLcpconfItiudata DisplayString
  nvLcpconfAccm DisplayString
  nvLcpconfMode INTEGER
  nvLcpconfPfc INTEGER
  nvLcpconfAcfc INTEGER
  nvLcpconfRestartim INTEGER
  nvLcpconfMaxterm INTEGER
  nvLcpconfMaxcfg INTEGER
  nvLcpconfMaxnak INTEGER
  nvLcpconfInactivty INTEGER
  nvLcpconfAuth INTEGER
  nvLcpconfSecurtmr INTEGER
  nvLcpconfChalint INTEGER
  nvLcpconfMultilink INTEGER
  nvLcpconfpppTrapEn INTEGER
  nvLcpconfComprot1 INTEGER
  nvLcpconfComprot2 INTEGER
  nvLcpconfUsrdelim DisplayString
  nvLcpconfNaifwd INTEGER
  nvLcpconfTxmaxbuf INTEGER
  nvLcpconfStatus INTEGER

NvMpconfEntry  
SEQUENCE    
  nvMpconfIndex INTEGER
  nvMpconfProfile DisplayString
  nvMpconfAdminS INTEGER
  nvMpconfTrapEnable INTEGER
  nvMpconfLnkLimit INTEGER
  nvMpconfTxFrag INTEGER
  nvMpconfTxFragMin INTEGER
  nvMpconfTxShortSeq INTEGER
  nvMpconfComprot1 INTEGER
  nvMpconfComprot2 INTEGER
  nvMpconfComptype INTEGER
  nvMpconfStatus INTEGER

NvMpstatPart1Entry  
SEQUENCE    
  nvMpstatPart1Index INTEGER
  nvMpstatPart1UserName DisplayString
  nvMpstatPart1IpcpOperS INTEGER
  nvMpstatPart1Ipcp INTEGER
  nvMpstatPart1IpAddress DisplayString
  nvMpstatPart1Profile DisplayString
  nvMpstatPart1RmtClass INTEGER
  nvMpstatPart1RmtDisc DisplayString
  nvMpstatPart1LocClass INTEGER
  nvMpstatPart1LocDisc DisplayString
  nvMpstatPart1RmtMRRU INTEGER
  nvMpstatPart1LocMRRU INTEGER
  nvMpstatPart1RmtSeqS INTEGER
  nvMpstatPart1LocSeqS INTEGER
  nvMpstatPart1Link1 DisplayString
  nvMpstatPart1Link2 DisplayString
  nvMpstatPart1Link3 DisplayString
  nvMpstatPart1Link4 DisplayString
  nvMpstatPart1Link5 DisplayString
  nvMpstatPart1Link6 DisplayString
  nvMpstatPart1Link7 DisplayString
  nvMpstatPart1Link8 DisplayString
  nvMpstatPart1Link9 DisplayString
  nvMpstatPart1Link10 DisplayString
  nvMpstatPart1Link11 DisplayString
  nvMpstatPart1Link12 DisplayString
  nvMpstatPart1Link13 DisplayString
  nvMpstatPart1Link14 DisplayString
  nvMpstatPart1Link15 DisplayString
  nvMpstatPart1Link16 DisplayString

NvMpstatPart2Entry  
SEQUENCE    
  nvMpstatPart2Index INTEGER
  nvMpstatPart2InOctets Counter
  nvMpstatPart2InPkts Counter
  nvMpstatPart2InBfrags Counter
  nvMpstatPart2InEfrags Counter
  nvMpstatPart2InMfrags Counter
  nvMpstatPart2InRsmErr Counter
  nvMpstatPart2InDiscrd Counter
  nvMpstatPart2InErrors Counter
  nvMpstatPart2InEch Counter
  nvMpstatPart2InEchRp Counter
  nvMpstatPart2InDiscRq Counter
  nvMpstatPart2UnKnwnPr Counter
  nvMpstatPart2OutOctets Counter
  nvMpstatPart2OutPkts Counter
  nvMpstatPart2OutBfrags Counter
  nvMpstatPart2OutEfrags Counter
  nvMpstatPart2OutMfrags Counter
  nvMpstatPart2OutDiscrd Counter
  nvMpstatPart2OutErrors Counter
  nvMpstatPart2OutEch Counter
  nvMpstatPart2OutEchRp Counter
  nvMpstatPart2OutDiscRq Counter
  nvMpstatPart2OutCmPcnt Counter
  nvMpstatPart2InCmPcnt Counter
  nvMpstatPart2OutExpnds Counter
  nvMpstatPart2Dtreset DisplayString

NvElxstatEntry  
SEQUENCE    
  nvElxstatIndex INTEGER
  nvElxstatPhysAddr DisplayString
  nvElxstatAdminStat INTEGER
  nvElxstatOperStat INTEGER
  nvElxstatInOctets Counter
  nvElxstatInUcasts Counter
  nvElxstatInNUcasts Counter
  nvElxstatInDiscards Counter
  nvElxstatInErrors Counter
  nvElxstatUnKnwnPrs Counter
  nvElxstatOutOctets Counter
  nvElxstatOutUcasts Counter
  nvElxstatOutNUcasts Counter
  nvElxstatOutDiscrds Counter
  nvElxstatOutErrors Counter
  nvElxstatDtreset DisplayString

NvElxconfEntry  
SEQUENCE    
  nvElxconfIndex INTEGER
  nvElxconfEnable INTEGER
  nvElxconfInactivty INTEGER

NvIpconfEntry  
SEQUENCE    
  nvIpconfIndex INTEGER
  nvIpconfIpaddr DisplayString
  nvIpconfMask DisplayString
  nvIpconfBcastaddr DisplayString
  nvIpconfMtu INTEGER
  nvIpconfEncap INTEGER
  nvIpconfRoutprot INTEGER
  nvIpconfStatus INTEGER

NvIpstatEntry  
SEQUENCE    
  nvIpstatIndex INTEGER
  nvIpstatInRxs Counter
  nvIpstatInHdrErrs Counter
  nvIpstatInAdrErrs Counter
  nvIpstatForwDatas Counter
  nvIpstatUnKnwnPrs Counter
  nvIpstatInDiscrds Counter
  nvIpstatInDlvrs Counter
  nvIpstatOutRqsts Counter
  nvIpstatOutDiscrds Counter
  nvIpstatOutNoRts Counter
  nvIpstatReasmRqds Counter
  nvIpstatReasmOKs Counter
  nvIpstatReasmFails Counter
  nvIpstatFragOKs Counter
  nvIpstatFragFails Counter
  nvIpstatFragCrs Counter
  nvIpstatDtreset DisplayString

NvIpwanmapEntry  
SEQUENCE    
  nvIpwanmapIndex INTEGER
  nvIpwanmapIpaddr DisplayString
  nvIpwanmapMask DisplayString
  nvIpwanmapBcastcntl INTEGER
  nvIpwanmapMtu INTEGER
  nvIpwanmapMetric INTEGER
  nvIpwanmapInactivty INTEGER
  nvIpwanmapNetaddr DisplayString
  nvIpwanmapUserdat DisplayString
  nvIpwanmapRevacc INTEGER
  nvIpwanmapRevcall INTEGER
  nvIpwanmapTput INTEGER
  nvIpwanmapPsize INTEGER
  nvIpwanmapWsize INTEGER
  nvIpwanmapCugtype INTEGER
  nvIpwanmapCug INTEGER
  nvIpwanmapRpoa INTEGER
  nvIpwanmapPvcid INTEGER
  nvIpwanmapFrpvc INTEGER
  nvIpwanmapNetprot INTEGER
  nvIpwanmapIpcp INTEGER
  nvIpwanmapIdnum INTEGER
  nvIpwanmapStatus INTEGER

NvIprouteEntry  
SEQUENCE    
  nvIprouteIndex INTEGER
  nvIprouteIpaddr DisplayString
  nvIprouteMask DisplayString
  nvIprouteNexthop DisplayString
  nvIprouteMetric INTEGER
  nvIprouteStatus INTEGER

NvIprtstatEntry  
SEQUENCE    
  nvIprtstatIndex INTEGER
  nvIprtstatDest DisplayString
  nvIprtstatInterface INTEGER
  nvIprtstatMetric INTEGER
  nvIprtstatNextHop DisplayString
  nvIprtstatType INTEGER
  nvIprtstatProto INTEGER

NvIcmpstatEntry  
SEQUENCE    
  nvIcmpstatIndex INTEGER
  nvIcmpstatInMsgs Counter
  nvIcmpstatInErrs Counter
  nvIcmpstatInDstUnrs Counter
  nvIcmpstatInTmExcds Counter
  nvIcmpstatInPrmPrbs Counter
  nvIcmpstatInSrcQus Counter
  nvIcmpstatInRdrcts Counter
  nvIcmpstatInEchs Counter
  nvIcmpstatInEchRps Counter
  nvIcmpstatInTmSts Counter
  nvIcmpstatInTmStRps Counter
  nvIcmpstatInAdMs Counter
  nvIcmpstatInAdMsRps Counter
  nvIcmpstatOutMsgs Counter
  nvIcmpstatOutErrs Counter
  nvIcmpstatOutDstUnrs Counter
  nvIcmpstatOutTmExcds Counter
  nvIcmpstatOutPrmPrbs Counter
  nvIcmpstatOutSrcQus Counter
  nvIcmpstatOutRdrcts Counter
  nvIcmpstatOutEchs Counter
  nvIcmpstatOutEchRps Counter
  nvIcmpstatOutTmSts Counter
  nvIcmpstatOutTmStRps Counter
  nvIcmpstatOutAdMs Counter
  nvIcmpstatOutAdMsRps Counter
  nvIcmpstatDtreset DisplayString

NvIptrunkEntry  
SEQUENCE    
  nvIptrunkIndex INTEGER
  nvIptrunkIpaddr DisplayString
  nvIptrunkDstiptrnk INTEGER
  nvIptrunkStatus INTEGER

NvIpcpconfEntry  
SEQUENCE    
  nvIpcpconfIndex INTEGER
  nvIpcpconfLcp INTEGER
  nvIpcpconfCompress INTEGER
  nvIpcpconfTest INTEGER
  nvIpcpconfProfile DisplayString
  nvIpcpconfDnsadd1 DisplayString
  nvIpcpconfDnsadd2 DisplayString
  nvIpcpconfNbnsadd1 DisplayString
  nvIpcpconfNbnsadd2 DisplayString
  nvIpcpconfStatus INTEGER

NvTcpstatEntry  
SEQUENCE    
  nvTcpstatIndex INTEGER
  nvTcpstatConnattempts Counter
  nvTcpstatAccepts Counter
  nvTcpstatConnects Counter
  nvTcpstatDrops Counter
  nvTcpstatConndrops Counter
  nvTcpstatCloseds Counter
  nvTcpstatSegstimeds Counter
  nvTcpstatRttupdateds Counter
  nvTcpstatDelacks Counter
  nvTcpstatTimeoutdrops Counter
  nvTcpstatRexmttimeos Counter
  nvTcpstatPersisttimeos Counter
  nvTcpstatKeeptimeos Counter
  nvTcpstatKeepprobes Counter
  nvTcpstatKeepdrops Counter
  nvTcpstatSndtotals Counter
  nvTcpstatSndpacks Counter
  nvTcpstatSndbytes Counter
  nvTcpstatSndrexmitpacks Counter
  nvTcpstatSndrexmitbytes Counter
  nvTcpstatSndacks Counter
  nvTcpstatSndprobes Counter
  nvTcpstatSndurgs Counter
  nvTcpstatSndwinups Counter
  nvTcpstatSndctrls Counter
  nvTcpstatRcvtotals Counter
  nvTcpstatRcvpacks Counter
  nvTcpstatRcvbytes Counter
  nvTcpstatRcvbadsums Counter
  nvTcpstatRcvbadoffs Counter
  nvTcpstatRcvshorts Counter
  nvTcpstatRcvduppacks Counter
  nvTcpstatRcvdupbytes Counter
  nvTcpstatRcvpartduppacks Counter
  nvTcpstatRcvpartdupbytes Counter
  nvTcpstatRcvoopacks Counter
  nvTcpstatRcvoobytes Counter
  nvTcpstatRcvpackafterwins Counter
  nvTcpstatRcvbyteafterwins Counter
  nvTcpstatRcvaftercloses Counter
  nvTcpstatRcvwinprobes Counter
  nvTcpstatRcvdupacks Counter
  nvTcpstatRcvacktoomuchs Counter
  nvTcpstatRcvackpacks Counter
  nvTcpstatRcvackbytes Counter
  nvTcpstatRcvwinupds Counter
  nvTcpstatDtreset DisplayString

NvTcpcnstatEntry  
SEQUENCE    
  nvTcpcnstatIndex INTEGER
  nvTcpcnstatState INTEGER
  nvTcpcnstatLocaladdr DisplayString
  nvTcpcnstatLocalport INTEGER
  nvTcpcnstatRemaddr DisplayString
  nvTcpcnstatRemport INTEGER
  nvTcpcnstatDtreset DisplayString

NvTcprstatEntry  
SEQUENCE    
  nvTcprstatIndex INTEGER
  nvTcprstatInport INTEGER
  nvTcprstatOutport INTEGER
  nvTcprstatService DisplayString
  nvTcprstatDtreset DisplayString

NvTslotconfEntry  
SEQUENCE    
  nvTslotconfIndex INTEGER
  nvTslotconfName DisplayString
  nvTslotconfOrigans INTEGER
  nvTslotconfTcpprof DisplayString
  nvTslotconfReserve1 DisplayString
  nvTslotconfReserve2 DisplayString
  nvTslotconfMaxrxbuf INTEGER
  nvTslotconfEnable INTEGER
  nvTslotconfStatus INTEGER
  nvTslotconfVersion INTEGER
  nvTslotconfPeertsid INTEGER
  nvTslotconfPeeripadr DisplayString

NvTslotstatEntry  
SEQUENCE    
  nvTslotstatIndex INTEGER
  nvTslotstatName DisplayString
  nvTslotstatService INTEGER
  nvTslotstatServiceid DisplayString
  nvTslotstatOpstate INTEGER
  nvTslotstatRemipaddr DisplayString
  nvTslotstatRemtsid INTEGER
  nvTslotstatTcpcn INTEGER
  nvTslotstatNumcon INTEGER
  nvTslotstatNumfailcn INTEGER
  nvTslotstatTotrxfrm INTEGER
  nvTslotstatTottxfrm INTEGER
  nvTslotstatCurtxfrm INTEGER
  nvTslotstatCurrxfrm INTEGER
  nvTslotstatCurdrprx INTEGER
  nvTslotstatDtreset DisplayString

NvTcpprofEntry  
SEQUENCE    
  nvTcpprofIndex INTEGER
  nvTcpprofProfname DisplayString
  nvTcpprofKeepidle INTEGER
  nvTcpprofKeepprbs DisplayString
  nvTcpprofKeepintvl INTEGER
  nvTcpprofStatus INTEGER

NvNsockconfEntry  
SEQUENCE    
  nvNsockconfIndex INTEGER
  nvNsockconfMaxconn INTEGER
  nvNsockconfStatus INTEGER
  nvNsockconfDefport INTEGER

NvNsockmapEntry  
SEQUENCE    
  nvNsockmapIndex INTEGER
  nvNsockmapOrigin INTEGER
  nvNsockmapService INTEGER
  nvNsockmapMaxsessn INTEGER
  nvNsockmapNbusport INTEGER
  nvNsockmapNetaddr DisplayString
  nvNsockmapUserdata DisplayString
  nvNsockmapTcpport INTEGER
  nvNsockmapIpaddr DisplayString
  nvNsockmapTcpmsglen INTEGER
  nvNsockmapStatus INTEGER

NvFtpconfEntry  
SEQUENCE    
  nvFtpconfIndex INTEGER
  nvFtpconfReqaddr DisplayString
  nvFtpconfUsername DisplayString
  nvFtpconfPassword DisplayString
  nvFtpconfTimeout INTEGER
  nvFtpconfStatus INTEGER

NvTnconfEntry  
SEQUENCE    
  nvTnconfIndex INTEGER
  nvTnconfNumSess INTEGER
  nvTnconfDeftnclass DisplayString
  nvTnconfDefiticlass DisplayString
  nvTnconfDefminbspace INTEGER
  nvTnconfDefmaxbspace INTEGER

NvTnclassEntry  
SEQUENCE    
  nvTnclassIndex INTEGER
  nvTnclassClassname DisplayString
  nvTnclassAobreak INTEGER
  nvTnclassIpcmd INTEGER
  nvTnclassGoahead INTEGER
  nvTnclassStatus INTEGER

NvTnmapEntry  
SEQUENCE    
  nvTnmapIndex INTEGER
  nvTnmapPortnum INTEGER
  nvTnmapTnclass DisplayString
  nvTnmapIticlass DisplayString
  nvTnmapStatus INTEGER

NvTnstatEntry  
SEQUENCE    
  nvTnstatIndex INTEGER
  nvTnstatPortnum INTEGER
  nvTnstatStatus INTEGER
  nvTnstatMode INTEGER
  nvTnstatLastCmd DisplayString
  nvTnstatOptions DisplayString
  nvTnstatClientAddr DisplayString

NvTncconfEntry  
SEQUENCE    
  nvTncconfIndex INTEGER
  nvTncconfNumSess INTEGER
  nvTncconfX3parms INTEGER
  nvTncconfSetact INTEGER
  nvTncconfIdletim INTEGER
  nvTncconfEscape INTEGER
  nvTncconfEcho INTEGER
  nvTncconfInterrupt INTEGER
  nvTncconfQuit INTEGER
  nvTncconfFout INTEGER
  nvTncconfErase INTEGER
  nvTncconfKill INTEGER
  nvTncconfAyt INTEGER
  nvTncconfSuspend INTEGER
  nvTncconfDnsaddr DisplayString
  nvTncconfStatus INTEGER

NvTncmapEntry  
SEQUENCE    
  nvTncmapIndex INTEGER
  nvTncmapNetad DisplayString
  nvTncmapUsdata DisplayString
  nvTncmapIpaddr DisplayString
  nvTncmapTcppn DisplayString
  nvTncmapX3parms INTEGER
  nvTncmapMode INTEGER
  nvTncmapSecure INTEGER
  nvTncmapStatus INTEGER

NvTncstatEntry  
SEQUENCE    
  nvTncstatIndex INTEGER
  nvTncstatSessnum INTEGER
  nvTncstatStatus INTEGER
  nvTncstatDnsidx INTEGER
  nvTncstatCalladdr DisplayString
  nvTncstatCalldata DisplayString
  nvTncstatIpaddr DisplayString
  nvTncstatPortnum INTEGER
  nvTncstatMode INTEGER
  nvTncstatX29err INTEGER

NvRadconfEntry  
SEQUENCE    
  nvRadconfIndex INTEGER
  nvRadconfName DisplayString
  nvRadconfSecret DisplayString
  nvRadconfN1 INTEGER
  nvRadconfT1 INTEGER
  nvRadconfAcct INTEGER
  nvRadconfNumdigits INTEGER
  nvRadconfAuth1 DisplayString
  nvRadconfAuth2 DisplayString
  nvRadconfAuth3 DisplayString
  nvRadconfAcct1 DisplayString
  nvRadconfAcct2 DisplayString
  nvRadconfAcct3 DisplayString
  nvRadconfAcctauth INTEGER
  nvRadconfAuth1port INTEGER
  nvRadconfAuth2port INTEGER
  nvRadconfAuth3port INTEGER
  nvRadconfAcct1port INTEGER
  nvRadconfAcct2port INTEGER
  nvRadconfAcct3port INTEGER
  nvRadconfAttrchk INTEGER
  nvRadconfDnsatt1 INTEGER
  nvRadconfDnsatt2 INTEGER
  nvRadconfNbnsatt1 INTEGER
  nvRadconfStatus INTEGER
  nvRadconfNbnsatt2 INTEGER

NvRaduserEntry  
SEQUENCE    
  nvRaduserIndex INTEGER
  nvRaduserUsername DisplayString
  nvRaduserPasswd DisplayString
  nvRaduserRespmsg INTEGER
  nvRaduserStatus INTEGER

NvRadcstatEntry  
SEQUENCE    
  nvRadcstatIndex INTEGER
  nvRadcstatRadAdminS INTEGER
  nvRadcstatRadcOperS INTEGER
  nvRadcstatNAuths DisplayString
  nvRadcstatNAuthLocl DisplayString
  nvRadcstatNAuthLost DisplayString
  nvRadcstatNAuthRtry DisplayString
  nvRadcstatNAuth1Acc DisplayString
  nvRadcstatNAuth1Rej DisplayString
  nvRadcstatNAuth2Acc DisplayString
  nvRadcstatNAuth2Rej DisplayString
  nvRadcstatNAuth3Acc DisplayString
  nvRadcstatNAuth3Rej DisplayString
  nvRadcstatNAcct DisplayString
  nvRadcstatNAcctLost DisplayString
  nvRadcstatNAcctRtry DisplayString
  nvRadcstatNAcct1 DisplayString
  nvRadcstatNAcct2 DisplayString
  nvRadcstatNAcct3 DisplayString
  nvRadcstatNSilent DisplayString
  nvRadcstatDtreset DisplayString

NvRadustatEntry  
SEQUENCE    
  nvRadustatIndex INTEGER
  nvRadustatRaduOperS INTEGER
  nvRadustatSessionId DisplayString
  nvRadustatUserId DisplayString
  nvRadustatNasPort DisplayString
  nvRadustatNasIpAddr DisplayString
  nvRadustatFrmIpaddr DisplayString
  nvRadustatFrmIpMask DisplayString
  nvRadustatState DisplayString
  nvRadustatClass DisplayString
  nvRadustatSType INTEGER
  nvRadustatFrmProto INTEGER
  nvRadustatFrmRting INTEGER
  nvRadustatSTime INTEGER
  nvRadustatFrmMtu INTEGER
  nvRadustatFrmRt INTEGER
  nvRadustatSTimeout INTEGER
  nvRadustatITimeout INTEGER
  nvRadustatDFilter INTEGER
  nvRadustatReqId DisplayString
  nvRadustatDtreset DisplayString

NvSnmpconfEntry  
SEQUENCE    
  nvSnmpconfIndex INTEGER
  nvSnmpconflocation DisplayString
  nvSnmpconfcontact DisplayString
  nvSnmpconfsysname DisplayString
  nvSnmpconfauthen INTEGER
  nvSnmpconfstatus INTEGER

NvSnmpmgrEntry  
SEQUENCE    
  nvSnmpmgrIndex INTEGER
  nvSnmpmgrIp DisplayString
  nvSnmpmgrComm DisplayString
  nvSnmpmgrAccPriv INTEGER
  nvSnmpmgrSndTrap INTEGER
  nvSnmpmgrstatus INTEGER

NvPosprofEntry  
SEQUENCE    
  nvPosprofIndex INTEGER
  nvPosprofName DisplayString
  nvPosprofSize INTEGER
  nvPosprofNumchan INTEGER
  nvPosprofPermchan INTEGER
  nvPosprofDirection INTEGER
  nvPosprofProtocol INTEGER
  nvPosprofAddrtype INTEGER
  nvPosprofUserdata DisplayString
  nvPosprofMode INTEGER
  nvPosprofIdletime INTEGER
  nvPosprofRouting INTEGER
  nvPosprofTranslate INTEGER
  nvPosprofTpduaddr DisplayString
  nvPosprofEftrspto INTEGER
  nvPosprofRetrytim INTEGER
  nvPosprofNretry INTEGER
  nvPosprofActsupl INTEGER
  nvPosprofResptim INTEGER
  nvPosprofPolltim INTEGER
  nvPosprofPolladdr DisplayString
  nvPosprofSkip INTEGER
  nvPosprofTcpmsglen INTEGER
  nvPosprofPortname DisplayString
  nvPosprofRsrcpool DisplayString
  nvPosprofStatus INTEGER

NvPosconfEntry  
SEQUENCE    
  nvPosconfIndex INTEGER
  nvPosconfName DisplayString
  nvPosconfEnable INTEGER
  nvPosconfProfile DisplayString
  nvPosconfStatus INTEGER

NvPosmsgmapEntry  
SEQUENCE    
  nvPosmsgmapIndex INTEGER
  nvPosmsgmapPattern INTEGER
  nvPosmsgmapDest DisplayString
  nvPosmsgmapStatus INTEGER

NvPosniimapEntry  
SEQUENCE    
  nvPosniimapIndex INTEGER
  nvPosniimapTpduaddr DisplayString
  nvPosniimapDest DisplayString
  nvPosniimapStatus INTEGER

NvPosnmsmapEntry  
SEQUENCE    
  nvPosnmsmapIndex INTEGER
  nvPosnmsmapNmsid DisplayString
  nvPosnmsmapDest DisplayString
  nvPosnmsmapStatus INTEGER

NvPosisoEntry  
SEQUENCE    
  nvPosisoIndex INTEGER
  nvPosisoName DisplayString
  nvPosisoContrec INTEGER
  nvPosisoField2 INTEGER
  nvPosisoField3 INTEGER
  nvPosisoField4 INTEGER
  nvPosisoField5 INTEGER
  nvPosisoField6 INTEGER
  nvPosisoField7 INTEGER
  nvPosisoField8 INTEGER
  nvPosisoField9 INTEGER
  nvPosisoField10 INTEGER
  nvPosisoField11 INTEGER
  nvPosisoField12 INTEGER
  nvPosisoField13 INTEGER
  nvPosisoField14 INTEGER
  nvPosisoField15 INTEGER
  nvPosisoField16 INTEGER
  nvPosisoField17 INTEGER
  nvPosisoField18 INTEGER
  nvPosisoField19 INTEGER
  nvPosisoField20 INTEGER
  nvPosisoField21 INTEGER
  nvPosisoField22 INTEGER
  nvPosisoField23 INTEGER
  nvPosisoField24 INTEGER
  nvPosisoField25 INTEGER
  nvPosisoField26 INTEGER
  nvPosisoField27 INTEGER
  nvPosisoField28 INTEGER
  nvPosisoField29 INTEGER
  nvPosisoField30 INTEGER
  nvPosisoField31 INTEGER
  nvPosisoField32 INTEGER
  nvPosisoField33 INTEGER
  nvPosisoField34 INTEGER
  nvPosisoField35 INTEGER
  nvPosisoField36 INTEGER
  nvPosisoField37 INTEGER
  nvPosisoField38 INTEGER
  nvPosisoField39 INTEGER
  nvPosisoField40 INTEGER
  nvPosisoField41 INTEGER
  nvPosisoField42 INTEGER
  nvPosisoField43 INTEGER
  nvPosisoField44 INTEGER
  nvPosisoField45 INTEGER
  nvPosisoField46 INTEGER
  nvPosisoField47 INTEGER
  nvPosisoField48 INTEGER
  nvPosisoField49 INTEGER
  nvPosisoField50 INTEGER
  nvPosisoField51 INTEGER
  nvPosisoField52 INTEGER
  nvPosisoField53 INTEGER
  nvPosisoField54 INTEGER
  nvPosisoField55 INTEGER
  nvPosisoField56 INTEGER
  nvPosisoField57 INTEGER
  nvPosisoField58 INTEGER
  nvPosisoField59 INTEGER
  nvPosisoField60 INTEGER
  nvPosisoField61 INTEGER
  nvPosisoField62 INTEGER
  nvPosisoField63 INTEGER
  nvPosisoField64 INTEGER
  nvPosisoStatus INTEGER

NvPosvisaEntry  
SEQUENCE    
  nvPosvisaIndex INTEGER
  nvPosvisaName DisplayString
  nvPosvisaField1 INTEGER
  nvPosvisaField2 INTEGER
  nvPosvisaField3 INTEGER
  nvPosvisaField4 INTEGER
  nvPosvisaField5 INTEGER
  nvPosvisaField6 INTEGER
  nvPosvisaField7 INTEGER
  nvPosvisaField8 INTEGER
  nvPosvisaField9 INTEGER
  nvPosvisaField10 INTEGER
  nvPosvisaField11 INTEGER
  nvPosvisaField12 INTEGER
  nvPosvisaField13 INTEGER
  nvPosvisaField14 INTEGER
  nvPosvisaField15 INTEGER
  nvPosvisaField16 INTEGER
  nvPosvisaField17 INTEGER
  nvPosvisaField18 INTEGER
  nvPosvisaField19 INTEGER
  nvPosvisaField20 INTEGER
  nvPosvisaStatus INTEGER

NvPosstatEntry  
SEQUENCE    
  nvPosstatIndex INTEGER
  nvPosstatName DisplayString
  nvPosstatNactivchn INTEGER
  nvPosstatProtocol INTEGER
  nvPosstatNumcalls INTEGER
  nvPosstatNfailcall INTEGER
  nvPosstatNumimsgs INTEGER
  nvPosstatNumomsgs INTEGER
  nvPosstatEftreqs INTEGER
  nvPosstatEftrsps INTEGER
  nvPosstatNmsreqs INTEGER
  nvPosstatNmsrsps INTEGER
  nvPosstatNodatart INTEGER
  nvPosstatNotpdurt INTEGER
  nvPosstatInvrqtpdu INTEGER
  nvPosstatNousdest INTEGER
  nvPosstatQueued INTEGER
  nvPosstatCommfail INTEGER
  nvPosstatInvrstpdu INTEGER
  nvPosstatDnlnkfail INTEGER
  nvPosstatRspnomtch INTEGER
  nvPosstatConnfail INTEGER
  nvPosstatRsptimout INTEGER
  nvPosstatNmsbaddst INTEGER
  nvPosstatNmsbadhst INTEGER
  nvPosstatNbadframes INTEGER
  nvPosstatNtoolong INTEGER
  nvPosstatDtreset DisplayString

NvApacsconfEntry  
SEQUENCE    
  nvApacsconfIndex INTEGER
  nvApacsconfNodename DisplayString
  nvApacsconfSitename DisplayString
  nvApacsconfHelpphone DisplayString
  nvApacsconfReserve1 DisplayString
  nvApacsconfBillingT1 INTEGER
  nvApacsconfBillingT2 INTEGER
  nvApacsconfBillingT3 INTEGER
  nvApacsconfBillingT4 INTEGER
  nvApacsconfBillingT5 INTEGER
  nvApacsconfBillingT6 INTEGER
  nvApacsconfDlrtries INTEGER
  nvApacsconfTimerA INTEGER
  nvApacsconfTimerB INTEGER
  nvApacsconfTimerC INTEGER
  nvApacsconfDscdleeot INTEGER
  nvApacsconfParerrall INTEGER
  nvApacsconfStatus INTEGER

NvAnuaconfEntry  
SEQUENCE    
  nvAnuaconfIndex INTEGER
  nvAnuaconfLabel1 DisplayString
  nvAnuaconfReserve1 DisplayString
  nvAnuaconfNuaAddress DisplayString
  nvAnuaconfAltLabel DisplayString
  nvAnuaconfRsvrReverse INTEGER
  nvAnuaconfRedirect INTEGER
  nvAnuaconfRetries INTEGER
  nvAnuaconfPreempt INTEGER
  nvAnuaconfMaxpsze INTEGER
  nvAnuaconfStrippar INTEGER
  nvAnuaconfStatus INTEGER

NvAbillstatEntry  
SEQUENCE    
  nvAbillstatIndex INTEGER
  nvAbillstatNua DisplayString
  nvAbillstatTbcalls INTEGER
  nvAbillstatTbtime INTEGER
  nvAbillstatTfail INTEGER
  nvAbillstatTxbytes INTEGER
  nvAbillstatRxbytes INTEGER
  nvAbillstatB1call INTEGER
  nvAbillstatB1time INTEGER
  nvAbillstatB2call INTEGER
  nvAbillstatB2time INTEGER
  nvAbillstatB3call INTEGER
  nvAbillstatB3time INTEGER
  nvAbillstatB4call INTEGER
  nvAbillstatB4time INTEGER
  nvAbillstatB5call INTEGER
  nvAbillstatB5time INTEGER
  nvAbillstatB6call INTEGER
  nvAbillstatB6time INTEGER
  nvAbillstatB7call INTEGER
  nvAbillstatB7time INTEGER
  nvAbillstatPbcalls INTEGER
  nvAbillstatPbtime INTEGER
  nvAbillstatPfail INTEGER
  nvAbillstatPtxbytes INTEGER
  nvAbillstatPrxbytes INTEGER
  nvAbillstatP1call INTEGER
  nvAbillstatP1time INTEGER
  nvAbillstatP2call INTEGER
  nvAbillstatP2time INTEGER
  nvAbillstatP3call INTEGER
  nvAbillstatP3time INTEGER
  nvAbillstatP4call INTEGER
  nvAbillstatP4time INTEGER
  nvAbillstatP5call INTEGER
  nvAbillstatP5time INTEGER
  nvAbillstatP6call INTEGER
  nvAbillstatP6time INTEGER
  nvAbillstatP7call INTEGER
  nvAbillstatP7time INTEGER
  nvAbillstatDtreset DisplayString

NvApmdmstatEntry  
SEQUENCE    
  nvApmdmstatIndex INTEGER
  nvApmdmstatSpeed INTEGER
  nvApmdmstatTbcalls INTEGER
  nvApmdmstatSuccess INTEGER
  nvApmdmstatHostclr INTEGER
  nvApmdmstatNwclr INTEGER
  nvApmdmstatFltrain INTEGER
  nvApmdmstatFlsess INTEGER
  nvApmdmstatTxpkt INTEGER
  nvApmdmstatRxpkt INTEGER
  nvApmdmstatTxbytes INTEGER
  nvApmdmstatRxbytes INTEGER
  nvApmdmstatB1calls INTEGER
  nvApmdmstatB2calls INTEGER
  nvApmdmstatB3calls INTEGER
  nvApmdmstatB4calls INTEGER
  nvApmdmstatB5calls INTEGER
  nvApmdmstatB6calls INTEGER
  nvApmdmstatB7calls INTEGER
  nvApmdmstatDtreset DisplayString

NvApacsstatEntry  
SEQUENCE    
  nvApacsstatIndex INTEGER
  nvApacsstatNidle INTEGER
  nvApacsstatNxidle INTEGER
  nvApacsstatCursimul INTEGER
  nvApacsstatResetdate DisplayString
  nvApacsstatTcalls INTEGER
  nvApacsstatTxnaks INTEGER
  nvApacsstatRxnaks INTEGER
  nvApacsstatTxbytes INTEGER
  nvApacsstatRxbytes INTEGER
  nvApacsstatCallrcv INTEGER
  nvApacsstatFailneg INTEGER
  nvApacsstatNoadrblk INTEGER
  nvApacsstatInvadrblk INTEGER
  nvApacsstatNonuamtch INTEGER
  nvApacsstatTrmdscsu INTEGER
  nvApacsstatLoscarsu INTEGER
  nvApacsstatParerrsu INTEGER
  nvApacsstatGdadrblks INTEGER
  nvApacsstatX25clrcip INTEGER
  nvApacsstatActtmocip INTEGER
  nvApacsstatTrmdsccip INTEGER
  nvApacsstatLoscarcip INTEGER
  nvApacsstatLrcerrcip INTEGER
  nvApacsstatParerrcip INTEGER
  nvApacsstatTmoerrcip INTEGER
  nvApacsstatX25conns INTEGER
  nvApacsstatX25clrdat INTEGER
  nvApacsstatActtmodat INTEGER
  nvApacsstatTrmdscdat INTEGER
  nvApacsstatLoscardat INTEGER
  nvApacsstatDscnoack INTEGER
  nvApacsstatDscexcnak INTEGER
  nvApacsstatLrcerrdat INTEGER
  nvApacsstatParerrdat INTEGER
  nvApacsstatBdhostblk INTEGER
  nvApacsstatTrmnodat INTEGER
  nvApacsstatHostnodat INTEGER
  nvApacsstatTrmnoack INTEGER
  nvApacsstatRetrntmo INTEGER
  nvApacsstatRetrnnak INTEGER
  nvApacsstatTxenqs INTEGER
  nvApacsstatDleeotsnt INTEGER
  nvApacsstatDleeotrcv INTEGER
  nvApacsstatUnxhstclr INTEGER
  nvApacsstatNwadrblks INTEGER
  nvApacsstatRjadrblks INTEGER
  nvApacsstatNonuaentr INTEGER
  nvApacsstatMaxsimul INTEGER
  nvApacsstatN300bd INTEGER
  nvApacsstatN1200bd INTEGER
  nvApacsstatN2400bd INTEGER
  nvApacsstatN9600bd INTEGER
  nvApacsstatN14400bd INTEGER
  nvApacsstatN28800bd INTEGER
  nvApacsstatSimultime DisplayString
  nvApacsstatDtreset DisplayString

NvBillconf1Entry  
SEQUENCE    
  nvBillconf1Index INTEGER
  nvBillconfEnable INTEGER
  nvBillconfSegsize INTEGER
  nvBillconfSet1 INTEGER
  nvBillconfSet1nua1 DisplayString
  nvBillconfSet1nua2 DisplayString
  nvBillconfSet1nua3 DisplayString
  nvBillconfSet2 INTEGER
  nvBillconfSet2nua1 DisplayString
  nvBillconfSet2nua2 DisplayString
  nvBillconfSet2nua3 DisplayString
  nvBillconfSet3 INTEGER
  nvBillconfSet3nua1 DisplayString
  nvBillconfSet3nua2 DisplayString
  nvBillconfSet3nua3 DisplayString
  nvBillconfSet4 INTEGER
  nvBillconfSet4nua1 DisplayString
  nvBillconfSet4nua2 DisplayString
  nvBillconfSet4nua3 DisplayString
  nvBillconfSet5 INTEGER
  nvBillconfSet5nua1 DisplayString
  nvBillconfSet5nua2 DisplayString
  nvBillconfSet5nua3 DisplayString
  nvBillconfSet6 INTEGER
  nvBillconfSet6nua1 DisplayString
  nvBillconfSet6nua2 DisplayString
  nvBillconfSet6nua3 DisplayString

NvBillconf2Entry  
SEQUENCE    
  nvBillconf2Index INTEGER
  nvBillconfSet7 INTEGER
  nvBillconfSet7nua1 DisplayString
  nvBillconfSet7nua2 DisplayString
  nvBillconfSet7nua3 DisplayString
  nvBillconfSet8 INTEGER
  nvBillconfSet8nua1 DisplayString
  nvBillconfSet8nua2 DisplayString
  nvBillconfSet8nua3 DisplayString
  nvBillconfSet9 INTEGER
  nvBillconfSet9nua1 DisplayString
  nvBillconfSet9nua2 DisplayString
  nvBillconfSet9nua3 DisplayString
  nvBillconfSet10 INTEGER
  nvBillconfSet10nua1 DisplayString
  nvBillconfSet10nua2 DisplayString
  nvBillconfSet10nua3 DisplayString
  nvBillconfSet11 INTEGER
  nvBillconfSet11nua1 DisplayString
  nvBillconfSet11nua2 DisplayString
  nvBillconfSet11nua3 DisplayString
  nvBillconfSet12 INTEGER
  nvBillconfSet12nua1 DisplayString
  nvBillconfSet12nua2 DisplayString
  nvBillconfSet12nua3 DisplayString

NvBillstatEntry  
SEQUENCE    
  nvBillstatIndex INTEGER
  nvBillstatNodeid INTEGER
  nvBillstatDate DisplayString
  nvBillstatTime DisplayString
  nvBillstatNuaset INTEGER
  nvBillstatN300bps INTEGER
  nvBillstatN1200bps INTEGER
  nvBillstatN2400bps INTEGER
  nvBillstatNgrtr2400 INTEGER
  nvBillstatTxseg INTEGER
  nvBillstatRxseg INTEGER
  nvBillstatRxcallc INTEGER
  nvBillstatHostclr INTEGER
  nvBillstatNetclr INTEGER
  nvBillstatTxpak INTEGER
  nvBillstatRxpak INTEGER
  nvBillstatLess5 INTEGER
  nvBillstat5to10 INTEGER
  nvBillstat10to15 INTEGER
  nvBillstat15to20 INTEGER
  nvBillstatGrtr20 INTEGER
  nvBillstatClosed INTEGER

NvApfilterEntry  
SEQUENCE    
  nvApfilterIndex INTEGER
  nvApfilterCalled DisplayString
  nvApfilterCalling DisplayString
  nvApfilterAblock DisplayString
  nvApfilterLabel1 DisplayString
  nvApfilterMerchid DisplayString
  nvApfilterTermid DisplayString
  nvApfilterFailcause INTEGER
  nvApfilterThreshold INTEGER
  nvApfilterStatus INTEGER

NvApfclstatEntry  
SEQUENCE    
  nvApfclstatIndex INTEGER
  nvApfclstatDate DisplayString
  nvApfclstatTime DisplayString
  nvApfclstatCalling DisplayString
  nvApfclstatCalled DisplayString
  nvApfclstatAblock DisplayString
  nvApfclstatNua DisplayString
  nvApfclstatLabel1 DisplayString
  nvApfclstatMerchid DisplayString
  nvApfclstatTermid DisplayString
  nvApfclstatSpeed INTEGER
  nvApfclstatTxbytes INTEGER
  nvApfclstatRxbytes INTEGER
  nvApfclstatIsdnclr INTEGER
  nvApfclstatX25clr INTEGER
  nvApfclstatDialind INTEGER
  nvApfclstatTermtype DisplayString
  nvApfclstatPstndur INTEGER
  nvApfclstatX25dur INTEGER
  nvApfclstatDspname DisplayString
  nvApfclstatPriname INTEGER
  nvApfclstatWanport DisplayString
  nvApfclstatFailcause INTEGER
  nvApfclstatFilter INTEGER

NvApclstatEntry  
SEQUENCE    
  nvApclstatIndex INTEGER
  nvApclstatDate DisplayString
  nvApclstatTime DisplayString
  nvApclstatCalling DisplayString
  nvApclstatCalled DisplayString
  nvApclstatAblock DisplayString
  nvApclstatNua DisplayString
  nvApclstatLabel1 DisplayString
  nvApclstatMerchid DisplayString
  nvApclstatTermid DisplayString
  nvApclstatSpeed INTEGER
  nvApclstatTxbytes INTEGER
  nvApclstatRxbytes INTEGER
  nvApclstatIsdnclr INTEGER
  nvApclstatX25clr INTEGER
  nvApclstatDialind INTEGER
  nvApclstatTermtype DisplayString
  nvApclstatPstndur INTEGER
  nvApclstatX25dur INTEGER
  nvApclstatDspname DisplayString
  nvApclstatPriname INTEGER
  nvApclstatWanport DisplayString
  nvApclstatFailcause INTEGER
  nvApclstatFilter INTEGER

NvR2profEntry  
SEQUENCE    
  nvR2profIndex INTEGER
  nvR2profProfname DisplayString
  nvR2profSuffix DisplayString
  nvR2profcdBits INTEGER
  nvR2profClearback INTEGER
  nvR2profForcerel INTEGER
  nvR2profClearack INTEGER
  nvR2profReanswer INTEGER
  nvR2profMfmode INTEGER
  nvR2profMfnextdig INTEGER
  nvR2profMfrestart INTEGER
  nvR2profMfcongstion INTEGER
  nvR2profMfvacant INTEGER
  nvR2profMfspeech INTEGER
  nvR2profMfbusy INTEGER
  nvR2profMfspchnc INTEGER
  nvR2profMfgroupb INTEGER
  nvR2profMfanumsch INTEGER
  nvR2profMftimeout INTEGER
  nvR2profStatus INTEGER
  nvR2profAnswergrd INTEGER
  nvR2profClrfwdgrd INTEGER
  nvR2profMfabnrel INTEGER
  nvR2profIdlealmsk INTEGER
  nvR2profSeizalmsk INTEGER
  nvR2profSzakalmsk INTEGER
  nvR2profAnswalmsk INTEGER
  nvR2profClbkalmsk INTEGER
  nvR2profFcrlalmsk INTEGER
  nvR2profClfwalmsk INTEGER
  nvR2profBlckalmsk INTEGER

NvR2sysparEntry  
SEQUENCE    
  nvR2sysparIndex INTEGER
  nvR2sysparProfname DisplayString
  nvR2sysparMaxperdsp INTEGER
  nvR2sysparAllocthrs INTEGER
  nvR2sysparDeallthrs INTEGER
  nvR2sysparStatint INTEGER
  nvR2sysparAlarmint INTEGER
  nvR2sysparLineway INTEGER
  nvR2sysparMaxbnmlen INTEGER
  nvR2sysparMinbnmlen INTEGER
  nvR2sysparGetcalling INTEGER

NvR2confEntry  
SEQUENCE    
  nvR2confIndex INTEGER
  nvR2confDliname DisplayString
  nvR2confStatus INTEGER

NvR2pstatEntry  
SEQUENCE    
  nvR2pstatIndex INTEGER
  nvR2pstatDliname DisplayString
  nvR2pstatPstat INTEGER
  nvR2pstatTsstat DisplayString
  nvR2pstatObr2dsp INTEGER
  nvR2pstatObstat INTEGER
  nvR2pstatLstatinfo INTEGER
  nvR2pstatLinbadcnt Counter
  nvR2pstatTsbadcnt Counter
  nvR2pstatTotisigatt Counter
  nvR2pstatToticalatt Counter
  nvR2pstatToticalest Counter
  nvR2pstatTotosigatt Counter
  nvR2pstatTotocalatt Counter
  nvR2pstatTotocalest Counter
  nvR2pstatDtreset DisplayString
  nvR2pstatFlavor DisplayString

NvR2dspstatEntry  
SEQUENCE    
  nvR2dspstatIndex INTEGER
  nvR2dspstatDevname DisplayString
  nvR2dspstatStat INTEGER
  nvR2dspstatNumobchn Counter
  nvR2dspstatNumibchn Counter
  nvR2dspstatUnusedchn Counter
  nvR2dspstatTotobchn Counter
  nvR2dspstatTotibchn Counter
  nvR2dspstatDtreset DisplayString
  nvR2dspstatFlavor DisplayString

NvR2cstatEntry  
SEQUENCE    
  nvR2cstatIndex INTEGER
  nvR2cstatR2port INTEGER
  nvR2cstatTimeslot INTEGER
  nvR2cstatIbr2dsp INTEGER
  nvR2cstatCstat INTEGER
  nvR2cstatDirection INTEGER
  nvR2cstatReason INTEGER
  nvR2cstatCallnum INTEGER
  nvR2cstatCallednum DisplayString
  nvR2cstatCallingnum DisplayString
  nvR2cstatLanguage INTEGER
  nvR2cstatEchosup INTEGER
  nvR2cstatCparty INTEGER

NvRbsysparEntry  
SEQUENCE    
  nvRbsysparIndex INTEGER
  nvRbsysparMaxperdsp INTEGER
  nvRbsysparAllocthrs INTEGER
  nvRbsysparDeallthrs INTEGER
  nvRbsysparStatint INTEGER
  nvRbsysparAlarmint INTEGER
  nvRbsysparMaxbnmlen INTEGER
  nvRbsysparMinbnmlen INTEGER
  nvRbsysparPollint INTEGER
  nvRbsysparStatus INTEGER

NvRbconfEntry  
SEQUENCE    
  nvRbconfIndex INTEGER
  nvRbconfDliname DisplayString
  nvRbconfProfname DisplayString
  nvRbconfRtmethod INTEGER
  nvRbconfStatus INTEGER

NvRbpstatEntry  
SEQUENCE    
  nvRbpstatIndex INTEGER
  nvRbpstatDliname DisplayString
  nvRbpstatFlavor DisplayString
  nvRbpstatPstat INTEGER
  nvRbpstatTsstat DisplayString
  nvRbpstatRbsrbdsp INTEGER
  nvRbpstatRbstat INTEGER
  nvRbpstatLinbadcnt Counter
  nvRbpstatTsbadcnt Counter
  nvRbpstatTotisigatt Counter
  nvRbpstatToticalatt Counter
  nvRbpstatToticalest Counter
  nvRbpstatTotosigatt Counter
  nvRbpstatTotocalatt Counter
  nvRbpstatTotocalest Counter
  nvRbpstatDtreset DisplayString

NvRbdspstatEntry  
SEQUENCE    
  nvRbdspstatIndex INTEGER
  nvRbdspstatDevname DisplayString
  nvRbdspstatFlavor DisplayString
  nvRbdspstatStat INTEGER
  nvRbdspstatNumrbpipe Counter
  nvRbdspstatNumibchn Counter
  nvRbdspstatUnusedchn Counter
  nvRbdspstatTotrbpipe Counter
  nvRbdspstatTotibchn Counter
  nvRbdspstatDtreset DisplayString

NvRbcstatEntry  
SEQUENCE    
  nvRbcstatIndex INTEGER
  nvRbcstatRbport INTEGER
  nvRbcstatTimeslot INTEGER
  nvRbcstatIbrbdsp INTEGER
  nvRbcstatCstat INTEGER
  nvRbcstatDirection INTEGER
  nvRbcstatReason INTEGER
  nvRbcstatCallnum INTEGER
  nvRbcstatCallednum DisplayString
  nvRbcstatCallingnum DisplayString

NvRbprofEntry  
SEQUENCE    
  nvRbprofIndex INTEGER
  nvRbprofProfname DisplayString
  nvRbprofSuffix DisplayString
  nvRbprofSigtype INTEGER
  nvRbprofRlcf INTEGER
  nvRbprofLcfo INTEGER
  nvRbprofWinklen INTEGER
  nvRbprofMfdelay INTEGER
  nvRbprofDisconlen INTEGER
  nvRbprofIbsigtype INTEGER
  nvRbprofDtmftmout INTEGER
  nvRbprofDtmfon INTEGER
  nvRbprofDtmfoff INTEGER
  nvRbprofStatus INTEGER

NvL2tpconfEntry  
SEQUENCE    
  nvL2tpconfIndex INTEGER
  nvL2tpconfAdminStat INTEGER
  nvL2tpconfAckTimout INTEGER
  nvL2tpconfInactivty INTEGER
  nvL2tpconfRetrans INTEGER
  nvL2tpconfIdle INTEGER
  nvL2tpconfStatus INTEGER

NvL2tpstatEntry  
SEQUENCE    
  nvL2tpstatIndex INTEGER
  nvL2tpstatProtVrsn INTEGER
  nvL2tpstatActivTnls INTEGER
  nvL2tpstatActivSns INTEGER
  nvL2tpstatMlfrmPkt INTEGER
  nvL2tpstatCtrlRecv INTEGER
  nvL2tpstatCtrlOofW INTEGER
  nvL2tpstatCtrlOofS INTEGER
  nvL2tpstatCtrlSend INTEGER
  nvL2tpstatDataRecv INTEGER
  nvL2tpstatDataSend INTEGER
  nvL2tpstatTnlUnav INTEGER
  nvL2tpstatSessUnav INTEGER
  nvL2tpstatDtreset DisplayString

NvL2tptstatEntry  
SEQUENCE    
  nvL2tptstatIndex INTEGER
  nvL2tptstatLocalTnID INTEGER
  nvL2tptstatRemotTnID INTEGER
  nvL2tptstatLocalWSiz INTEGER
  nvL2tptstatRemotWSiz INTEGER
  nvL2tptstatRmtIPaddr DisplayString
  nvL2tptstatRmtHstNme DisplayString
  nvL2tptstatTunlState INTEGER
  nvL2tptstatRecvCtrl INTEGER
  nvL2tptstatRecvData INTEGER
  nvL2tptstatSendCtrl INTEGER
  nvL2tptstatSendData INTEGER
  nvL2tptstatDtreset DisplayString

NvL2tpsstatEntry  
SEQUENCE    
  nvL2tpsstatIndex INTEGER
  nvL2tpsstatTunnelID INTEGER
  nvL2tpsstatLclCallID INTEGER
  nvL2tpsstatRmtCallID INTEGER
  nvL2tpsstatCallSN INTEGER
  nvL2tpsstatState INTEGER
  nvL2tpsstatDeviceNum INTEGER
  nvL2tpsstatDataRecv INTEGER
  nvL2tpsstatDataSend INTEGER
  nvL2tpsstatDtreset DisplayString

NvTrapconfEntry  
SEQUENCE    
  nvTrapconfIndex INTEGER
  nvTrapconfTrapId INTEGER
  nvTrapconfDesc DisplayString
  nvTrapconfStatus INTEGER

NvStringEntry  
SEQUENCE    
  nvStringIndex INTEGER
  nvStringData DisplayString
  nvStringStatus INTEGER

Defined Values

telematics 11.1.230
OBJECT IDENTIFIER    

tmxNevada 11.1.230.5
OBJECT IDENTIFIER    

nevadaSystem 11.1.230.5.1
OBJECT IDENTIFIER    

nevadaModels 11.1.230.5.2
OBJECT IDENTIFIER    

nevadaFrameRelay 11.1.230.5.5
OBJECT IDENTIFIER    

nevadaIti 11.1.230.5.6
OBJECT IDENTIFIER    

nevadaSync 11.1.230.5.7
OBJECT IDENTIFIER    

nevadaX25 11.1.230.5.10
OBJECT IDENTIFIER    

nevadaIsdn 11.1.230.5.11
OBJECT IDENTIFIER    

nevadaPpp 11.1.230.5.12
OBJECT IDENTIFIER    

nevadaElx 11.1.230.5.15
OBJECT IDENTIFIER    

nevadaIp 11.1.230.5.16
OBJECT IDENTIFIER    

nevadaTcp 11.1.230.5.17
OBJECT IDENTIFIER    

nevadaFtp 11.1.230.5.18
OBJECT IDENTIFIER    

nevadaTelnet 11.1.230.5.20
OBJECT IDENTIFIER    

nevadaRadius 11.1.230.5.40
OBJECT IDENTIFIER    

nevadaSnmp 11.1.230.5.45
OBJECT IDENTIFIER    

nevadaApacs 11.1.230.5.50
OBJECT IDENTIFIER    

nevadaR2 11.1.230.5.55
OBJECT IDENTIFIER    

nevadaRb 11.1.230.5.58
OBJECT IDENTIFIER    

nevadaTraps 11.1.230.5.64
OBJECT IDENTIFIER    

nevadaAdmin 11.1.230.5.65
OBJECT IDENTIFIER    

nevadaPos 11.1.230.5.66
OBJECT IDENTIFIER    

nevadaL2tp 11.1.230.5.70
OBJECT IDENTIFIER    

nvNodestat 11.1.230.5.1.1
OBJECT IDENTIFIER    

nvNodestatTotalbufs 11.1.230.5.1.1.1
total number of buffers in system - these buffers are freed at startup time to be allocated as needed. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatCurminbufs 11.1.230.5.1.1.2
minimum number of buffers available in last 15 minute cycle Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatCurmincpu 11.1.230.5.1.1.3
cpu availablity -minimum percentage of CPU available in last 15 minute cycle. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatCurtime 11.1.230.5.1.1.4
current time number of minutes into current time - is set to 0 at start of current cycle - is incremented every minute - when incremented to 15 then cycle is over and curminbuf and curmincpu are calculated and curtime is set back to 0 Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvNodestatFreebufs 11.1.230.5.1.1.6
number of available buffers at last check - check is done every 3 seconds Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatFreecpu 11.1.230.5.1.1.7
percentage of CPU available at last check - check is done every 3 seconds Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvNodestatMaxcpu 11.1.230.5.1.1.8
maximum CPU availablity maximum count of idle CPU cycles per 16 milliseconds - percentages of CPU availability are calculated relative to this number (freecpu,curmincpu,mincpu) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatMinbufs 11.1.230.5.1.1.10
minimum number of buffers minimum number of available buffers ever recorded Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatMincpu 11.1.230.5.1.1.11
cpu availablity minimum percentage of CPU available ever recorded Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatRxavgpps 11.1.230.5.1.1.12
average rx packets per second average packets per second received during last 15 minute cycle Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatRxcurpps 11.1.230.5.1.1.13
current rx packets per second packets per second received during last 3 second cycle Statistic is zeroed at startup time
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatTxavgpps 11.1.230.5.1.1.14
average tx packets per second average packets per second transmitted during last 15 minute cycle Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatTxcurpps 11.1.230.5.1.1.15
current tx packets per second packets per second transmitted during last 3 second cycle Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatX25call 11.1.230.5.1.1.16
Actual number of lcns allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatChgreqid 11.1.230.5.1.1.17
Change Request ID Confirmation management change request ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatCurclk 11.1.230.5.1.1.18
Indicates the current clock source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNodestatClkfails 11.1.230.5.1.1.19
Number of times clock failure has been detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodestatDtreset 11.1.230.5.1.1.20
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvNodestatNumcalls 11.1.230.5.1.1.21
Number of succesful modem calls received by ITI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodeconf 11.1.230.5.1.2
OBJECT IDENTIFIER    

nvNodeconfMaxRec 11.1.230.5.1.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodeconfNumRec 11.1.230.5.1.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodeconfTable 11.1.230.5.1.2.3
nodeconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvNodeconfEntry

nvNodeconfEntry 11.1.230.5.1.2.3.1
nodeconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvNodeconfEntry  

nvNodeconfIndex 11.1.230.5.1.2.3.1.1
Index of nodeconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNodeconfPartnum 11.1.230.5.1.2.3.1.2
Part Number -partnum- This is the part number of the software Format: AAAAAA-BBB-C-DDEEFF AAAAAA = Concatenated product code ie. a 4 link,8 channel switching PAD which has the code 2604-8 becomes 260408 BBB = Customer/feature code C = Medium DD = Major version number. A new set of documentation is generated for each major version EE = Database version number FF = Software version number Parameter is set during factory configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..19)  

nvNodeconfDbversion 11.1.230.5.1.2.3.1.3
Database Version (dbversion) Major and minor database release numbers Eg 0300 Similar usage as for software revision number Parameter is set during factory configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvNodeconfSwdate 11.1.230.5.1.2.3.1.7
Software Creation Date (swdate) Parameter is set during factory configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

nvNodeconfSwversion 11.1.230.5.1.2.3.1.8
Software Version (swversion) Major and minor software release numbers Eg. 0601 Parameter is set during factory configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvNodeconfCalarms 11.1.230.5.1.2.3.1.10
Max Custom Alarm Records (calarms) This field indicates the total num of custom alarm entries per box. DO NOT USE HUB-RESERVE3 OR TAKE ANY SPACE AWAY FROM IT TO USE FOR A NEW FIELD. IT IS THE SECRET HIDING PLACE WHERE THE HARDWARE CONFIGURATION IS STORED FOR USE IN DETECTING HARDWARE CHANGES WHEN REBOOTING. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..500  

nvNodeconfStartup 11.1.230.5.1.2.3.1.11
SD Script to automatically start after aprox. 10 seconds system boot
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvNodeconfSwtype 11.1.230.5.1.2.3.1.12
INF or SmartView Type (swtype) sview for old std billing Default value is sview (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sview(1), inf(2), inf2(3)  

nvNodeconfX25call 11.1.230.5.1.2.3.1.14
X.25 Call (nvX25call) This field indicates the total num of lcn per box Default value is 257.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..25000  

nvNodeconfAcctrec 11.1.230.5.1.2.3.1.16
Max Accounting Records (acctrec) This indicates the maximum number of accounting records that will be held in memory. When this number is reached, additional records will be discarded. Default value is 100.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNodeconfAlarmrec 11.1.230.5.1.2.3.1.17
Max Alarm Records (alarmrec) This indicates the maximum number of alarm records buffered Default value is 50.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNodeconfBusyout 11.1.230.5.1.2.3.1.21
used to busy out ITI ports when X25 links go down
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNodeconfRate1 11.1.230.5.1.2.3.1.22
Rate For Time Zone 1 (rate1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNodeconfRate2 11.1.230.5.1.2.3.1.23
Rate For Time Zone 2 (rate2)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNodeconfRate3 11.1.230.5.1.2.3.1.24
Rate For Time Zone 3 (rate3)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNodeconfRate4 11.1.230.5.1.2.3.1.25
Rate For Time Zone 4 (rate4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNodeconfNodeid 11.1.230.5.1.2.3.1.27
Node Identifier (nodeid) This field is used by the Network Bus component to identify this node within a private network,and must be unique within that domain. Default value is 1000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

nvNodeconfExstat 11.1.230.5.1.2.3.1.28
enhanced x25 stat (exstat)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), link(2), x25(3)  

nvNodeconfRsttimer 11.1.230.5.1.2.3.1.29
Restart timer for OMS Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvNodeconfChgreqid 11.1.230.5.1.2.3.1.30
Change Request Id
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvNodeconfClksrc1 11.1.230.5.1.2.3.1.31
Primary clock source to synchronize TDM connects.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNodeconfClksrc2 11.1.230.5.1.2.3.1.32
Primary clock source to synchronize TDM connects.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNodeconfClksrc3 11.1.230.5.1.2.3.1.33
Primary clock source to synchronize TDM connects.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNodeconfDsprfail 11.1.230.5.1.2.3.1.34
dspr failure threshold
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvNodeconfFrmrfail 11.1.230.5.1.2.3.1.35
frmr failure threshold
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvNodeconfQdlifail 11.1.230.5.1.2.3.1.36
Qdli failure threshold
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvAcctstat 11.1.230.5.1.3
OBJECT IDENTIFIER    

nvAcctstatMaxRec 11.1.230.5.1.3.1
total number of records in file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctstatNumRec 11.1.230.5.1.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctstatTable 11.1.230.5.1.3.3
acctstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvAcctstatEntry

nvAcctstatEntry 11.1.230.5.1.3.3.1
acctstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvAcctstatEntry  

nvAcctstatComponent 11.1.230.5.1.3.3.1.1
name of component This is the name of component accumulating the statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvAcctstatRecord 11.1.230.5.1.3.3.1.2
record ID This is the internal number of the accounting record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctstatCalled 11.1.230.5.1.3.3.1.3
Called address (from bcd)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvAcctstatCalling 11.1.230.5.1.3.3.1.4
Calling address (from bcd).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvAcctstatRecorg 11.1.230.5.1.3.3.1.5
call origin: 1=iti/lserv 2=x25 .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER iti(1), x25(2)  

nvAcctstatSegsize 11.1.230.5.1.3.3.1.6
segment size This is the segment size of this port that generates accounting. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32767  

nvAcctstatDay 11.1.230.5.1.3.3.1.7
date of call establishment (internal) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctstatMinute 11.1.230.5.1.3.3.1.8
time of call establishment Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctstatSecond 11.1.230.5.1.3.3.1.9
time of call establishment Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctstatTxpaks 11.1.230.5.1.3.3.1.10
number transmitted packets Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstat64ktxpaks 11.1.230.5.1.3.3.1.11
1000 transmitted packets Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstatRxpaks 11.1.230.5.1.3.3.1.12
number received packets Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstat64krxpaks 11.1.230.5.1.3.3.1.13
1000 received packets Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstatTxchars 11.1.230.5.1.3.3.1.14
number transmitted characters Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstat64ktxchars 11.1.230.5.1.3.3.1.15
1000 transmitted characters Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstatRxchars 11.1.230.5.1.3.3.1.16
number received characters Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstat64krxchars 11.1.230.5.1.3.3.1.17
1000 received characters Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstatTxsegs 11.1.230.5.1.3.3.1.18
number transmitted segments Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstat64ktxsegs 11.1.230.5.1.3.3.1.19
1000 transmitted segments Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstatRxsegs 11.1.230.5.1.3.3.1.20
number received segments Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstat64krxsegs 11.1.230.5.1.3.3.1.21
1000 received segments Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvAcctstatAbstime 11.1.230.5.1.3.3.1.22
starting absolute time Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctstatDtreset 11.1.230.5.1.3.3.1.23
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvAcctstatCallid 11.1.230.5.1.3.3.1.24
Ptr to internal structure that starts accounting
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctstatInfofunc 11.1.230.5.1.3.3.1.25
Information function ptr provided by accounting entity
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctoper 11.1.230.5.1.4
OBJECT IDENTIFIER    

nvAcctoperMaxRec 11.1.230.5.1.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctoperNumRec 11.1.230.5.1.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctoperTable 11.1.230.5.1.4.3
acctoper file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvAcctoperEntry

nvAcctoperEntry 11.1.230.5.1.4.3.1
acctoper record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvAcctoperEntry  

nvAcctoperIndex 11.1.230.5.1.4.3.1.1
Index of acctoper record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAcctoperComponent 11.1.230.5.1.4.3.1.2
service component This is the name of the component that uses the accounting service. An example of this is NET1,ITI,etc. Parameter is set during factory configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvAcctoperEnable 11.1.230.5.1.4.3.1.3
enable/disable This field is used to enable the accounting function. Default value is true (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

nvAcctoperSegsize 11.1.230.5.1.4.3.1.4
segment size This field defines the size of a segment. A segment is usually a portion of a packet (ie. 64 bytes) as is more representative in actual accounting of resource utilization. The possible values range from one to the largest possible packet size. Default value is 64.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32767  

nvModemstat 11.1.230.5.1.5
OBJECT IDENTIFIER    

nvModemstatMaxRec 11.1.230.5.1.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvModemstatNumRec 11.1.230.5.1.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvModemstatTable 11.1.230.5.1.5.3
modemstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvModemstatEntry

nvModemstatEntry 11.1.230.5.1.5.3.1
modemstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvModemstatEntry  

nvModemstatIndex 11.1.230.5.1.5.3.1.1
Index of Modemstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvModemstatName 11.1.230.5.1.5.3.1.2
digital modem status name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvModemstatState 11.1.230.5.1.5.3.1.3
Current state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), hshake(2), ecdc(3), connected(4), retraining(5), renegotiating(6), clearDown(7)  

nvModemstatRate 11.1.230.5.1.5.3.1.4
modem rate in bps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), t1200R75(2), t75R1200(3), v300(4), v600(5), v1200(6), v2400(7), v4800(8), v7200(9), v9600NT(10), v9600(11), v12000(12), v14400(13), v16800(14), v19200(15), v21600(16), v24000(17), v26400(18), v28800(19), v31200(20), v33600(21), v32000(22), v34000(23), v36000(24), v38000(25), v40000(26), v42000(27), v44000(28), v46000(29), v48000(30), v50000(31), v52000(32), v54000(33), v56000(34), v58000(35), v60000(36), vv28000(37), v29333(38), v30667(39), vv32000(40), v33333(41), v34667(42), vv36000(43), v37333(44), v38667(45), vv40000(46), v41333(47), v42667(48), vv44000(49), v45333(50), v46667(51), vv48000(52), v49333(53), v50667(54), vv52000(55), v53333(56), v54667(57), vv56000(58), v57333(59), v58667(60), vv60000(61)  

nvModemstatType 11.1.230.5.1.5.3.1.5
modem modulation scheme.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), v34(2), v32bis(3), v32(4), v22bis(5), v22(6), v21(7), bell212(9), unknown(10), bell103(11), v23(12), v27(13), v29(14), v33(15), v17(16), v34bis(17), vpcm(18), v110(21)  

nvModemstatEctype 11.1.230.5.1.5.3.1.6
modem error correction status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), v42ErrorCorrection(2), mnpErrorCorrection(3)  

nvModemstatDctype 11.1.230.5.1.5.3.1.7
modem data compression status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), on(2), off(3)  

nvModemstatMode 11.1.230.5.1.5.3.1.8
synchronous or asynchronous.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER predetection(2), sync(3), async(4)  

nvModemstatRxparity 11.1.230.5.1.5.3.1.9
receive parity setting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER even(2), odd(3), mark(4), space(5), none(6), clear(7)  

nvModemstatTxparity 11.1.230.5.1.5.3.1.10
transmit parity setting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER even(2), odd(3), mark(4), space(5), none(6), clear(7)  

nvModemstatAccms 11.1.230.5.1.5.3.1.11
for async to sync PPP, shows asy char control maps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..17)  

nvModemstatMse 11.1.230.5.1.5.3.1.12
modem noise level (mean squared err).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvModemstatRcvlvl 11.1.230.5.1.5.3.1.13
Modem receive level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvModemstatRetrain 11.1.230.5.1.5.3.1.14
Number retrains this call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvModemstatRenego 11.1.230.5.1.5.3.1.15
Number renegotiations this call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvModemstatSelftest 11.1.230.5.1.5.3.1.16
soft init selftest result.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER passed(2), dspFailed(3), sramFailed(4), sramAndDspFailed(5)  

nvModemstatFirmver 11.1.230.5.1.5.3.1.17
Firmware version number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvModemstatModel 11.1.230.5.1.5.3.1.18
DSP microcode product code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvModemstatRxpclear 11.1.230.5.1.5.3.1.19
Modem clear rx parity (rxpclear) bit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvModemstatDsp 11.1.230.5.1.5.3.1.20
the name of the DSP allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvModemstatDtreset 11.1.230.5.1.5.3.1.21
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvModemconf 11.1.230.5.1.6
OBJECT IDENTIFIER    

nvModemconfMaxRec 11.1.230.5.1.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvModemconfNumRec 11.1.230.5.1.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvModemconfTable 11.1.230.5.1.6.3
modemconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvModemconfEntry

nvModemconfEntry 11.1.230.5.1.6.3.1
modemconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvModemconfEntry  

nvModemconfIndex 11.1.230.5.1.6.3.1.1
Index of modemconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvModemconfName 11.1.230.5.1.6.3.1.2
Digital modem resource config name (name) Parameter is set during factory configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvModemconfProfilename 11.1.230.5.1.6.3.1.4
Digital modemprof name that it is associated with
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvModemconfEnable 11.1.230.5.1.6.3.1.5
Enabled or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvModemconfStatus 11.1.230.5.1.6.3.1.20
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvSymuser 11.1.230.5.1.7
OBJECT IDENTIFIER    

nvSymuserMaxRec 11.1.230.5.1.7.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSymuserNumRec 11.1.230.5.1.7.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSymuserTable 11.1.230.5.1.7.3
symuser file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvSymuserEntry

nvSymuserEntry 11.1.230.5.1.7.3.1
symuser record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvSymuserEntry  

nvSymuserIndex 11.1.230.5.1.7.3.1.1
Index of symuser record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSymuserUsername 11.1.230.5.1.7.3.1.2
User Name (username) Name of user allowed to use system management functions. The System Manager Interface attempts to match the call user data field of an incoming call against the entries in this file. If no match is found, the call is cleared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvSymuserPassword 11.1.230.5.1.7.3.1.3
User Password (password) User password. After a user name is matched,the user is asked to enter their assigned password. If it is not entered correctly,the call is cleared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvSymuserStatus 11.1.230.5.1.7.3.1.5
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvNmsuser 11.1.230.5.1.8
OBJECT IDENTIFIER    

nvNmsuserMaxRec 11.1.230.5.1.8.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNmsuserNumRec 11.1.230.5.1.8.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNmsuserTable 11.1.230.5.1.8.3
nmsuser file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvNmsuserEntry

nvNmsuserEntry 11.1.230.5.1.8.3.1
nmsuser record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvNmsuserEntry  

nvNmsuserIndex 11.1.230.5.1.8.3.1.1
Index of nmsuser record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNmsuserCalladdr 11.1.230.5.1.8.3.1.2
NMS X.121 Address (calladdr)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvNmsuserCalldata 11.1.230.5.1.8.3.1.3
NMS Userdata (calldata) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..14)  

nvNmsuserPassword 11.1.230.5.1.8.3.1.4
NMS Component Password (password) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvNmsuserPsiz 11.1.230.5.1.8.3.1.5
Packet Size (psiz) Default value is 7+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b16(5), b32(6), b64(7), b128(8), b256(9), b512(10), b1024(11)  

nvNmsuserWsiz 11.1.230.5.1.8.3.1.6
Window Size (wsiz) Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

nvNmsuserRpoacode 11.1.230.5.1.8.3.1.7
RPOA Code (rpoacode) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNmsuserOchrg 11.1.230.5.1.8.3.1.8
Outgoing Charging Restriction (ochrg) Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oall(2), onorm(3), orev(4)  

nvNmsuserCug 11.1.230.5.1.8.3.1.9
Closed User Group Id (cug) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNmsuserTput 11.1.230.5.1.8.3.1.10
Throughput Class (tput) Default value is 10+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bps75(4), bps150(5), bps300(6), bps600(7), bps1200(8), bps2400(9), bps4800(10), bps9600(11)  

nvNmsuserNmsid 11.1.230.5.1.8.3.1.11
NMS Identification (nmsid)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvNmsuserStatus 11.1.230.5.1.8.3.1.12
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvNetmap 11.1.230.5.1.9
OBJECT IDENTIFIER    

nvNetmapMaxRec 11.1.230.5.1.9.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetmapNumRec 11.1.230.5.1.9.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetmapTable 11.1.230.5.1.9.3
netmap file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvNetmapEntry

nvNetmapEntry 11.1.230.5.1.9.3.1
netmap record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvNetmapEntry  

nvNetmapIndex 11.1.230.5.1.9.3.1.1
Index of netmap record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetmapNetaddr 11.1.230.5.1.9.3.1.2
Network X.121 Address (netaddr) This field contains the network address pattern that is matched against the the network address field in a 'call request'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvNetmapUserdata 11.1.230.5.1.9.3.1.3
User Data (userdata) This field contains the call user data pattern that is matched against the call user data field in a 'call request'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..14)  

nvNetmapNodeid 11.1.230.5.1.9.3.1.4
Node Identifier (nodeid) This parameter is the identifier of the entity providing the service for a matched network address and user data.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNetmapStatus 11.1.230.5.1.9.3.1.5
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvNetroute 11.1.230.5.1.10
OBJECT IDENTIFIER    

nvNetrouteMaxRec 11.1.230.5.1.10.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetrouteNumRec 11.1.230.5.1.10.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetrouteTable 11.1.230.5.1.10.3
netroute file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvNetrouteEntry

nvNetrouteEntry 11.1.230.5.1.10.3.1
netroute record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvNetrouteEntry  

nvNetrouteIndex 11.1.230.5.1.10.3.1.1
Index of netroute record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetrouteNodeid 11.1.230.5.1.10.3.1.2
Node Identifier (nodeid) This parameter is an identifier of destination node. This value was located in NETMAP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNetrouteService 11.1.230.5.1.10.3.1.3
Service Component (service) This parameter is an index into component table of component providing the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNetroutePrio 11.1.230.5.1.10.3.1.4
Route Priority (prio) This parameter represents the user-assigned priority of the route. The router searches this file for the highest priority route that will allow more connections. If the highest priority route is unavailable,the next highest is tried until all possibilities are exhausted and the call is cleared. Default value is 100.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvNetrouteStatus 11.1.230.5.1.10.3.1.5
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvNetpvc 11.1.230.5.1.11
OBJECT IDENTIFIER    

nvNetpvcMaxRec 11.1.230.5.1.11.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetpvcNumRec 11.1.230.5.1.11.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetpvcTable 11.1.230.5.1.11.3
netpvc file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvNetpvcEntry

nvNetpvcEntry 11.1.230.5.1.11.3.1
netpvc record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvNetpvcEntry  

nvNetpvcIndex 11.1.230.5.1.11.3.1.1
Index of netpvc record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetpvcService 11.1.230.5.1.11.3.1.2
Service Component (service) COMPID and PVCID together uniquely identify one end of a PVC,and make up the key to this file when searching for an 'A' end.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNetpvcPvcid 11.1.230.5.1.11.3.1.3
Local PVC Identifier (pvcid)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNetpvcPvccode 11.1.230.5.1.11.3.1.4
Global PVC Identifier (pvccode) PVCCODE uniquely identifies a PVC,and is used as the key to this file when searching for a 'B' end.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNetpvcPvcend 11.1.230.5.1.11.3.1.5
PVC End (pvcend) Default value is 2+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER originatingEnd(2), terminatingEnd(3), symmetricEnd(4)  

nvNetpvcStatus 11.1.230.5.1.11.3.1.6
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvNetpvcmap 11.1.230.5.1.12
OBJECT IDENTIFIER    

nvNetpvcmapMaxRec 11.1.230.5.1.12.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetpvcmapNumRec 11.1.230.5.1.12.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetpvcmapTable 11.1.230.5.1.12.3
netpvcmap file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvNetpvcmapEntry

nvNetpvcmapEntry 11.1.230.5.1.12.3.1
netpvcmap record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvNetpvcmapEntry  

nvNetpvcmapIndex 11.1.230.5.1.12.3.1.1
Index of netpvcmap record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetpvcmapPvccode 11.1.230.5.1.12.3.1.2
Global PVC Identifier (pvccode)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNetpvcmapNodeid 11.1.230.5.1.12.3.1.3
Node Identifier (nodeid) This parameter is the identifier of the entity providing 'B' end of a PVC within our network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvNetpvcmapStatus 11.1.230.5.1.12.3.1.10
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvNetcon 11.1.230.5.1.13
OBJECT IDENTIFIER    

nvNetconMaxRec 11.1.230.5.1.13.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetconNumRec 11.1.230.5.1.13.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetconTable 11.1.230.5.1.13.3
netcon file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvNetconEntry

nvNetconEntry 11.1.230.5.1.13.3.1
netcon record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvNetconEntry  

nvNetconIndex 11.1.230.5.1.13.3.1.1
Index of netcon record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNetconSrccompid 11.1.230.5.1.13.3.1.2
source component id Originating component of the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNetconDstcompid 11.1.230.5.1.13.3.1.3
destination component id Receiving component of the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNetconCallingad 11.1.230.5.1.13.3.1.4
calling network address (from bcd) The calling network address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

nvNetconCalledad 11.1.230.5.1.13.3.1.5
called network address (from bcd) The called network address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

nvNetconConstate 11.1.230.5.1.13.3.1.6
connection state The actual state of this connection. Initial status is 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initial(2), awaitingResponse(3), dataTransfer(5), disconnected(9)  

nvNetconConid 11.1.230.5.1.13.3.1.7
Internal Network connection identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNetconSrcid 11.1.230.5.1.13.3.1.8
Internal Source identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvNetconDstid 11.1.230.5.1.13.3.1.9
Internal Destination identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvRoutemap 11.1.230.5.1.14
OBJECT IDENTIFIER    

nvRoutemapMaxRec 11.1.230.5.1.14.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRoutemapNumRec 11.1.230.5.1.14.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRoutemapTable 11.1.230.5.1.14.3
routemap file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRoutemapEntry

nvRoutemapEntry 11.1.230.5.1.14.3.1
routemap record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRoutemapEntry  

nvRoutemapIndex 11.1.230.5.1.14.3.1.1
Index of routemap record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRoutemapAddrstr 11.1.230.5.1.14.3.1.2
Address string to be translated (addrstr).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvRoutemapAddrtype 11.1.230.5.1.14.3.1.3
How to interpret addrstr (addrtype).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER callednum(2), calledsub(3), any(9)  

nvRoutemapNetaddr 11.1.230.5.1.14.3.1.4
Netaddr yielded by match with addrstr.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

nvRoutemapUserdata 11.1.230.5.1.14.3.1.5
Userdata yielded by match with addrstr.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..14)  

nvRoutemapStatus 11.1.230.5.1.14.3.1.6
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvMediastat 11.1.230.5.1.15
OBJECT IDENTIFIER    

nvMediastatMaxRec 11.1.230.5.1.15.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMediastatNumRec 11.1.230.5.1.15.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMediastatTable 11.1.230.5.1.15.3
Mediastat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvMediastatEntry

nvMediastatEntry 11.1.230.5.1.15.3.1
Mediastat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvMediastatEntry  

nvMediastatIndex 11.1.230.5.1.15.3.1.1
Index of mediastat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMediastatOrigimage 11.1.230.5.1.15.3.1.2
original boot image.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER image1(1), image2(401)  

nvMediastatImage 11.1.230.5.1.15.3.1.3
current boot image.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER image1(1), image2(401)  

nvMediastatDebug 11.1.230.5.1.15.3.1.4
debug flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvMediastatImagechg 11.1.230.5.1.15.3.1.5
auto image change.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvMediastatDump 11.1.230.5.1.15.3.1.6
dump flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvMediastatImage1db 11.1.230.5.1.15.3.1.7
side0 database version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvMediastatImage1sw 11.1.230.5.1.15.3.1.8
side0 software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvMediastatImage2db 11.1.230.5.1.15.3.1.9
side1 database version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvMediastatImage2sw 11.1.230.5.1.15.3.1.10
side1 software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvMediastatMediasize 11.1.230.5.1.15.3.1.11
storage medium size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), v2MB(3), v4MB(5), v6MB(7), v8MB(9), v10MB(11), v12MB(13), v14MB(15), v16MB(17), v18MB(19), v20MB(21), v32MB(33)  

nvTnnlconf 11.1.230.5.1.16
OBJECT IDENTIFIER    

nvTnnlconfMaxRec 11.1.230.5.1.16.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnnlconfNumRec 11.1.230.5.1.16.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnnlconfTable 11.1.230.5.1.16.3
Backhaul instance table definition.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTnnlconfEntry

nvTnnlconfEntry 11.1.230.5.1.16.3.1
A tunnel table entry containing objects which configure a tunnel protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTnnlconfEntry  

nvTnnlconfIndex 11.1.230.5.1.16.3.1.1
Backhaul configuration entry index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnnlconfPortname 11.1.230.5.1.16.3.1.2
Port name (portname)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTnnlconfRsrcpool 11.1.230.5.1.16.3.1.3
Resource pool name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTnnlconfLineprot 11.1.230.5.1.16.3.1.5
Backhaul line protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dontcare(2), rfc1662(3)  

nvTnnlconfProt 11.1.230.5.1.16.3.1.6
Backhaul line protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER transparent(2), rfc1598(3)  

nvTnnlconfRtmethod 11.1.230.5.1.16.3.1.7
Backhaul routing protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER useconfig(2), usecallednm(3), usecalledsb(4)  

nvTnnlconfNetaddr 11.1.230.5.1.16.3.1.9
Backhaul network address when rtmethod is useconfig.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTnnlconfUserdata 11.1.230.5.1.16.3.1.10
Backhaul configuration user data.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvTnnlconfStatus 11.1.230.5.1.16.3.1.11
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvTnnlstat 11.1.230.5.1.17
OBJECT IDENTIFIER    

nvTnnlstatfMaxRec 11.1.230.5.1.17.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnnlstatNumRec 11.1.230.5.1.17.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnnlstatTable 11.1.230.5.1.17.3
Backhaul instance status table definition.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTnnlstatEntry

nvTnnlstatEntry 11.1.230.5.1.17.3.1
A tunnel status table entry containing fields which store tunnel status information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTnnlstatEntry  

nvTnnlstatIndex 11.1.230.5.1.17.3.1.1
Backhaul status entry index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnnlstatPortname 11.1.230.5.1.17.3.1.2
Port on which this Backhaul status entry is applied.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTnnlstatRsrcpool 11.1.230.5.1.17.3.1.3
Resource pool on which this Backhaul status entry is applied.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTnnlstatConnstat 11.1.230.5.1.17.3.1.4
Current connection status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tunnelnocb(2), tunnelnoport(3), tunnelinactive(4), tunnelcalling(5), tunnelactive(6)  

nvTnnlstatRtstring 11.1.230.5.1.17.3.1.5
String upon which routing was based.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvTnnlstatNetaddr 11.1.230.5.1.17.3.1.6
Network address to which call was routed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTnnlstatUserdata 11.1.230.5.1.17.3.1.7
User data to which call was routed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..13)  

nvTnnlstatCallatts 11.1.230.5.1.17.3.1.9
No of attempts to place current call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTnnlstatCallattfs 11.1.230.5.1.17.3.1.10
No of failed attempts to place current call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTnnlstatInframes 11.1.230.5.1.17.3.1.11
No of frames switched from line to tunnel route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTnnlstatOutframes 11.1.230.5.1.17.3.1.12
No of frames switched from tunnel route to line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTnnlstatDtreset 11.1.230.5.1.17.3.1.13
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvCDLITable 11.1.230.5.1.18
DLI configuration table definition.The actual database contains 17 tables, if a DLI card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvCDLIEntry

nvCDLIEntry 11.1.230.5.1.18.1
DLI configuration record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvCDLIEntry  

nvCDLISlotIndex 11.1.230.5.1.18.1.1
CDLI slot index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..17  

nvCDLIPortIndex 11.1.230.5.1.18.1.2
CDLI card port index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

nvCDLIName 11.1.230.5.1.18.1.3
The name of the DLI card port such as CDLI1_I2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvCDLIFormat 11.1.230.5.1.18.1.4
Frame format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER d4sf(1), d4esf(2), pcm30(3), crc4(4)  

nvCDLICode 11.1.230.5.1.18.1.5
Code format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3)  

nvCDLIFdl 11.1.230.5.1.18.1.6
Facilities data link format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), att(2), ansi(3)  

nvCDLISignaling 11.1.230.5.1.18.1.7
Signal type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ccs(1), rbs(2)  

nvCDLILineimp 11.1.230.5.1.18.1.8
Line impedance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ohm-120(1), ohm-75(2), ohm-100(3)  

nvCDLIEnable 11.1.230.5.1.18.1.9
Port enable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

nvCDLICsudsu 11.1.230.5.1.18.1.10
csudsu enabled or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

nvCDLIAtten 11.1.230.5.1.18.1.11
Attenuation of the line .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER t130(1), t124(2), t118(3), t112(4), t16(5), t10(6), t1neg75(7), t1neg150(8), t1neg225(9)  

nvCDLIGain 11.1.230.5.1.18.1.12
Gain of the receiver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER g12db(1), g26db(2), g36db(3), g43db(4)  

nvCDLIDataInver 11.1.230.5.1.18.1.13
Data inversion enabled or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

nvSDLITable 11.1.230.5.1.19
DLI statistics table definition.The actual database contains 17 tables, if a DLI card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvSDLIEntry

nvSDLIEntry 11.1.230.5.1.19.1
DLI statistics record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvSDLIEntry  

nvSDLISlotIndex 11.1.230.5.1.19.1.1
SDLI slot index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..17  

nvSDLIPortIndex 11.1.230.5.1.19.1.2
SDLI card port index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

nvSDLISdlinm 11.1.230.5.1.19.1.3
SDLI entry name such as SDLI1_I2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvSDLIDlitype 11.1.230.5.1.19.1.4
SDLI card port type such as E1 or T1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..3)  

nvSDLICurstate 11.1.230.5.1.19.1.5
SDLI card port current device state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), unknwn(2), down(3), red(4), blue(5), yell(6), mLine(7), mPay(8), busyAIS(9)  

nvSDLIRedcnts 11.1.230.5.1.19.1.6
SDLI card port red alarm count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDLIYelcnts 11.1.230.5.1.19.1.7
SDLI card port yellow alarm count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDLIBlucnts 11.1.230.5.1.19.1.8
SDLI card port blue alarm count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDLIErrcnt 11.1.230.5.1.19.1.9
SDLI card port crc alarm count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDLITxundrun 11.1.230.5.1.19.1.10
TX underrun count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDLIRxfrmslp 11.1.230.5.1.19.1.11
RX Slip count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDLIDtreset 11.1.230.5.1.19.1.12
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvUgconf 11.1.230.5.1.20
OBJECT IDENTIFIER    

nvUgconfMaxRec 11.1.230.5.1.20.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvUgconfNumRec 11.1.230.5.1.20.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvUgconfTable 11.1.230.5.1.20.3
Device usage group configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvUgconfEntry

nvUgconfEntry 11.1.230.5.1.20.3.1
Device usage group configuration record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvUgconfEntry  

nvUgconfIndex 11.1.230.5.1.20.3.1.1
Usage group entry index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvUgconfName 11.1.230.5.1.20.3.1.5
Usage group entry name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvUgconfPool 11.1.230.5.1.20.3.1.8
Usage group entry resource pool name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvUgconfNumrsrvd 11.1.230.5.1.20.3.1.11
Number of devices reserved for this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvUgconfThreshld 11.1.230.5.1.20.3.1.14
Allocation of disallowance thrreshold for this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvUgconfMaxbw 11.1.230.5.1.20.3.1.17
Maximum bandwidth allocated to this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvUgconfStatus 11.1.230.5.1.20.3.1.20
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvUgstat 11.1.230.5.1.21
OBJECT IDENTIFIER    

nvUgstatMaxRec 11.1.230.5.1.21.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvUgstatNumRec 11.1.230.5.1.21.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvUgstatTable 11.1.230.5.1.21.3
Device usage group statistics table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvUgstatEntry

nvUgstatEntry 11.1.230.5.1.21.3.1
Device usage group statistics record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvUgstatEntry  

nvUgstatIndex 11.1.230.5.1.21.3.1.1
Usage group statistics entry index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvUgstatName 11.1.230.5.1.21.3.1.2
Usage group statistics entry name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvUgstatPool 11.1.230.5.1.21.3.1.3
Usage group statistics entry resource pool name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvUgstatNumused 11.1.230.5.1.21.3.1.4
Number of devices allocated to this group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvUgstatBwused 11.1.230.5.1.21.3.1.5
Amount of bandwidth allocated to this group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvUgstatBwrejs 11.1.230.5.1.21.3.1.6
Rejections to this group due to bandwidth restrain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvUgstatUnavrejs 11.1.230.5.1.21.3.1.7
Rejections to this group due to device unavailability.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvUgstatThresrejs 11.1.230.5.1.21.3.1.8
Rejections to this group due to threshold restriction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvUgstatDtreset 11.1.230.5.1.21.3.1.9
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvDrstat 11.1.230.5.1.22
OBJECT IDENTIFIER    

nvDrstatMaxRec 11.1.230.5.1.22.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDrstatNumRec 11.1.230.5.1.22.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDrstatTable 11.1.230.5.1.22.3
Device pool registry statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDrstatEntry

nvDrstatEntry 11.1.230.5.1.22.3.1
Device pool registry statistics record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDrstatEntry  

nvDrstatIndex 11.1.230.5.1.22.3.1.1
Device pool registry statistics entry index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDrstatName 11.1.230.5.1.22.3.1.2
Device pool registry statistics entry name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvDrstatClass 11.1.230.5.1.22.3.1.3
Device class of this pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER port(1), dsp(2)  

nvDrstatNumdev 11.1.230.5.1.22.3.1.4
Number of devices registered to this pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDrstatNumrsrvd 11.1.230.5.1.22.3.1.5
Number of devices reserved to this pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDrstatNumavail 11.1.230.5.1.22.3.1.6
Number of devices available for allocation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDrstatNumused 11.1.230.5.1.22.3.1.7
Number of devices presently allocated for use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDrstatMaxused 11.1.230.5.1.22.3.1.8
Maximum number of numused since last box reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDrstatDtreset 11.1.230.5.1.22.3.1.9
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvCFRMRTable 11.1.230.5.1.23
Framer card configuration table definition. The actual framer card database has 17 tables. Each table uses name convention: CFRMR plus slot number. Each framer card has two static WAN ports and 128 smart ports. This table will combine 17 databases into one table. In order to support the actual framer card configuration, this table requires two instances: slot and port number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvCFRMREntry

nvCFRMREntry 11.1.230.5.1.23.1
Framer card configuration record definition. The total record number is 17. If there is a framer card plugged in one of the slot, then the corresponding framer record is active. Otherwise the record is not active.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvCFRMREntry  

nvCFRMRSlotIndex 11.1.230.5.1.23.1.1
Framer card slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCFRMRPortIndex 11.1.230.5.1.23.1.2
For static port, the index number is from 1 to 2. For smart port type, the index number is from 3 to 130.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCFRMRName 11.1.230.5.1.23.1.3
The name of a framer card port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvCFRMRRate 11.1.230.5.1.23.1.7
Framer card port baud rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER undef(1), v64K(2), v128K(3), v192K(4), v256K(5), v320K(6), v384K(7), v448K(8), v512K(9), v576K(10), v640K(11), v704K(12), v768K(13), v832K(14), v896K(15), v960K(16), v1024K(17), v1088K(18), v1152K(19), v1216K(20), v1280K(21), v1344K(22), v1408K(23), v1472K(24), v1536K(25), v1600K(26), v1664K(27), v1728K(28), v1792K(29), v1856K(30), v1920K(31), v1984K(32), v2048K(33)  

nvCFRMREIAtype 11.1.230.5.1.23.1.10
Port interface type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v3wire(1), vx21bis(2)  

nvCFRMRClkmode 11.1.230.5.1.23.1.13
Port clock mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER insync(1), exsync(2)  

nvCFRMRDebounce 11.1.230.5.1.23.1.16
WAN port eia debounce interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nvCFRMREnable 11.1.230.5.1.23.1.19
Enable or disable port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvSFRMRTable 11.1.230.5.1.24
Framer card statistics table definition. The actual framer card database has 17 tables. Each table uses name convention: SFRMR plus slot number. Each framer card has two static WAN ports and 128 smart ports. This table will combine 17 databases into one table. In order to support the actual framer card configuration, this table requires two instances: slot and port number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvSFRMREntry

nvSFRMREntry 11.1.230.5.1.24.1
Framer card statistics record definition. The total record number is 17. If there is a framer card plugged in one of the slot, then the corresponding framer record is active. Otherwise the record is not active.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvSFRMREntry  

nvSFRMRSlotIndex 11.1.230.5.1.24.1.1
Framer card slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSFRMRPortIndex 11.1.230.5.1.24.1.2
For static port, the index number is from 1 to 2. For smart port type, the index number is from 3 to 130.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSFRMRName 11.1.230.5.1.24.1.3
The name of a framer card port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvSFRMRMode 11.1.230.5.1.24.1.4
The operation mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER absent(1), dead(2), broken(3), async(4), sync(5)  

nvSFRMRState 11.1.230.5.1.24.1.5
The operation state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER free(1), down(2), setup(3), up(4), test(5)  

nvSFRMRRate 11.1.230.5.1.24.1.6
Framer card port baud rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER undef(1), v64K(2), v128K(3), v192K(4), v256K(5), v320K(6), v384K(7), v448K(8), v512K(9), v576K(10), v640K(11), v704K(12), v768K(13), v832K(14), v896K(15), v960K(16), v1024K(17), v1088K(18), v1152K(19), v1216K(20), v1280K(21), v1344K(22), v1408K(23), v1472K(24), v1536K(25), v1600K(26), v1664K(27), v1728K(28), v1792K(29), v1856K(30), v1920K(31), v1984K(32), v2048K(33)  

nvSFRMRCid 11.1.230.5.1.24.1.7
Circuit ID of Munich ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvSFRMRRxoff 11.1.230.5.1.24.1.8
RXOFF
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSFRMRTxoff 11.1.230.5.1.24.1.9
TXOFF
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSFRMRNrxoff 11.1.230.5.1.24.1.10
RNRXOFF
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSFRMRNtxoff 11.1.230.5.1.24.1.11
RNTXOFF
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSFRMRLostfrms 11.1.230.5.1.24.1.12
Number of lost frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSFRMRFerrs 11.1.230.5.1.24.1.13
FERRS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSFRMRPerrs 11.1.230.5.1.24.1.14
PERRS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSFRMRRxovrs 11.1.230.5.1.24.1.15
Number of receive overruns frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSFRMRCrcerrs 11.1.230.5.1.24.1.16
Number of CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSFRMRRxaborts 11.1.230.5.1.24.1.17
Number of receive aborte frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSFRMRDtreset 11.1.230.5.1.24.1.18
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvSlotstat 11.1.230.5.1.25
OBJECT IDENTIFIER    

nvSlotstatMaxRec 11.1.230.5.1.25.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSlotstatNumRec 11.1.230.5.1.25.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSlotstatTable 11.1.230.5.1.25.3
Slot statistics table definition.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvSlotstatEntry

nvSlotstatEntry 11.1.230.5.1.25.3.1
Nevada product is a 17 slot chassis. Each slot can be plugged in a communication card module. The module can be a Host Packet, Framer or DLI card module. The system can have only one Host Module and up to two Framer card module. This table contains statistics information for each slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvSlotstatEntry  

nvSlotstatIndex 11.1.230.5.1.25.3.1.1
Slot index number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..17  

nvSlotstatName 11.1.230.5.1.25.3.1.2
Slot name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

nvSlotstatCardType 11.1.230.5.1.25.3.1.3
Slot card type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER empty(1), dliE1(2), dliT1(3), framer(4), dsp(5), phost(6), qpsPower(7), framer2(8), qDE1(9), qDT1(10), oDLI(11), fRMR(12), ps(13), none(51), pHOSTIO(52), fRMRIO(53), e1IO(55), t1IO(56), pOWERIO(57), v11EXT(58), v11INT(59), v35(60), v24V35(61), v24(62), qDE1IO(63), qDT1IO(64), oDIO(65), pEM(66), pHIOM(67)  

nvSlotstatIotype 11.1.230.5.1.25.3.1.4
Slot IO type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER empty(1), none(51), phostIo(52), frmrIo(53), e1Io(54), t1Io(56), powerIo(57), v11ext(58), v11int(59), v35(60), v24v35(61), v24(62), qDE1IO(63), qDT1IO(64), oDIO(65), pEM(66), pHIOM(67)  

nvSlotstatCpu 11.1.230.5.1.25.3.1.5
Slot IO type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notapp(1), p5-100(2), i960JF(3), adsp2181(4)  

nvSlotstatRam 11.1.230.5.1.25.3.1.6
Amount of RAM on card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvSlotstatStatus 11.1.230.5.1.25.3.1.7
Status of card as given by bats. good(1), -- Card is working failure(2), -- Card is failing notPowered(3), -- Power Supply -48 volts not supplied notapplicable(4) -- not applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER good(1), failure(2), notPowered(3), notapplicable(4)  

nvSlotstatCardid 11.1.230.5.1.25.3.1.8
Card id from eeprom.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvSlotstatHwRevision 11.1.230.5.1.25.3.1.9
Hardware Revision of the board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvSlotstatCatPartnum 11.1.230.5.1.25.3.1.10
Catalog part number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvSlotstatSrNumber 11.1.230.5.1.25.3.1.11
Serial Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvSlotstatProdChkDate 11.1.230.5.1.25.3.1.12
Production Check Date.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvCDSPTable 11.1.230.5.1.26
DSP configuration table definition.The actual database contains 17 tables, if a DSP card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvCDSPEntry

nvCDSPEntry 11.1.230.5.1.26.1
DLI configuration record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvCDSPEntry  

nvCDSPSlotIndex 11.1.230.5.1.26.1.1
CDSP slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..17  

nvCDSPPortIndex 11.1.230.5.1.26.1.2
CDSP port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCDSPName 11.1.230.5.1.26.1.3
CDSP port name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvCDSPEnable 11.1.230.5.1.26.1.8
CDSP port enable control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), slowno(3), fastno(4)  

nvCDSPNumfaicon 11.1.230.5.1.26.1.9
CDSP num of consecutive hand shakes failed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvCDSPNumload 11.1.230.5.1.26.1.10
CDSP num of times redownload failed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvSDSPTable 11.1.230.5.1.27
DSP statistics table definition.The actual database contains 17 tables, if a DSP card is plugged in one of the slot then the data table matched the slot will become active, otherwise the record is not active. This table combines 17 tables into one MIB table which uses two table instances: slot and port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvSDSPEntry

nvSDSPEntry 11.1.230.5.1.27.1
DLI configuration record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvSDSPEntry  

nvSDSPSlotIndex 11.1.230.5.1.27.1.1
SDSP slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..17  

nvSDSPPortIndex 11.1.230.5.1.27.1.2
SDSP port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSDSPName 11.1.230.5.1.27.1.3
SDSP port name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvSDSPState 11.1.230.5.1.27.1.4
CDSP port state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(2), busy(3), dead(4), asleep(5), dwld(6)  

nvSDSPNumfaicon 11.1.230.5.1.27.1.5
number of consecutive handshake failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSDSPNumload 11.1.230.5.1.27.1.6
number of redownload attempts failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSDSPFailcaus 11.1.230.5.1.27.1.7
SDSP port state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER healthy(2), dwldFail(3), portUpFail(4), handshkeAbort(5), handshkeTimeout(6), llHandAbort(7), llHandTimeout(8), llHandHsAbo(9), cmdTimeout(10), monRegTimeout(11), clrDownTimeout(12), chCreErrNoReload(13), chCreErrReload(14), userDown(15), handModify(16), userReset(17), notUsable(18)  

nvSDSPNumcalls 11.1.230.5.1.27.1.8
Number of calls processed on this DSP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSDSPNumfnegs 11.1.230.5.1.27.1.9
Number of calls faild prior to negotiation start.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSDSPDtreset 11.1.230.5.1.27.1.10
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvSDSPNumIncom 11.1.230.5.1.27.1.11
Total number of INcoming calls made to this DSP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPNumOutgo 11.1.230.5.1.27.1.12
Total number of OUTgoing calls made to this DSP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPNumIfailneg 11.1.230.5.1.27.1.13
Total number of failed negotiations INcoming.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPNumOfailneg 11.1.230.5.1.27.1.14
Total number of failed negotiations OUTgoing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent1 11.1.230.5.1.27.1.15
DMOD- primary modem hs ended in abort condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent2 11.1.230.5.1.27.1.16
DMOD- primary modem hs ended in timeout condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent3 11.1.230.5.1.27.1.17
DMOD- Link layer modem hs ended in abort condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent4 11.1.230.5.1.27.1.18
DMOD- Link layer modem hs ende in timeout condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent5 11.1.230.5.1.27.1.19
DMOD- Link layer modem hs ended in primary hs aborted condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent6 11.1.230.5.1.27.1.20
DMOD- Command Response Timeout error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent7 11.1.230.5.1.27.1.21
DMOD- Cleardown procedure ended in timeout condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent8 11.1.230.5.1.27.1.22
DMOD- Moniter Register timeout error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent9 11.1.230.5.1.27.1.23
DMOD- Port Up failure No SABM from DSP to start the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent10 11.1.230.5.1.27.1.24
DMOD- CHCRERR - with DSP Fail logic optioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent11 11.1.230.5.1.27.1.25
DMOD- CHCRERR - with DSP Fail logic not optioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvSDSPEvent12 11.1.230.5.1.27.1.26
DMOD- modify action in SDSPx caused numfaicon threshold to be reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvCroute 11.1.230.5.1.28
OBJECT IDENTIFIER    

nvCrouteMaxRec 11.1.230.5.1.28.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrouteNumRec 11.1.230.5.1.28.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrouteTable 11.1.230.5.1.28.3
Circuit routing table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvCrouteEntry

nvCrouteEntry 11.1.230.5.1.28.3.1
Circuit routing table record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvCrouteEntry  

nvCrouteIndex 11.1.230.5.1.28.3.1.1
Index of croute record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrouteAddr 11.1.230.5.1.28.3.1.10
Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nvCrouteRouting 11.1.230.5.1.28.3.1.11
routing new var.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noroute(1), callednum(2), callngnum(3), calledsub(4), callngsub(5)  

nvCrouteType 11.1.230.5.1.28.3.1.13
circuit type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER switched(2), pernament(3)  

nvCrouteVol1prot 11.1.230.5.1.28.3.1.15
Protocol Specified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noprot(1), dcprot(2), g711a(3), g711mu(4), g711(5), v110(6), v120(7)  

nvCrouteVol1mode 11.1.230.5.1.28.3.1.17
Data mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nomode(1), dcmode(2), sync(3), async(4)  

nvCrouteBw 11.1.230.5.1.28.3.1.19
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvCrouteRcscp1 11.1.230.5.1.28.3.1.22
rcscp1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvCrouteRcscp2 11.1.230.5.1.28.3.1.25
rcscp1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvCrouteDialmapid 11.1.230.5.1.28.3.1.27
Record id of dialmap record to use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvCrouteReserve1 11.1.230.5.1.28.3.1.28
OBSOLETE - removed field.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvCrouteDirection 11.1.230.5.1.28.3.1.29
Direction record is for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2), unspec(3)  

nvCrouteChoice 11.1.230.5.1.28.3.1.30
A priority value. Used to specify which record gets precedence if two records have the same addr.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), fourth(4)  

nvCrouteStatus 11.1.230.5.1.28.3.1.31
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvCrcstat 11.1.230.5.1.29
OBJECT IDENTIFIER    

nvCrcstatMaxRec 11.1.230.5.1.29.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrcstatNumRec 11.1.230.5.1.29.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrcstatTable 11.1.230.5.1.29.3
Circuit connection status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvCrcstatEntry

nvCrcstatEntry 11.1.230.5.1.29.3.1
crcstat record indexed by record number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvCrcstatEntry  

nvCrcstatIndex 11.1.230.5.1.29.3.1.1
Index of crcstat record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrcstatCid 11.1.230.5.1.29.3.1.2
circuit connection identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrcstatState 11.1.230.5.1.29.3.1.3
circuit connection state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pending(1), connecting(2), connected(3), clearing(4), hung(5)  

nvCrcstatCallednum 11.1.230.5.1.29.3.1.4
called party address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvCrcstatBw 11.1.230.5.1.29.3.1.5
bandwidth of permanent circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrcstatRcsc0 11.1.230.5.1.29.3.1.6
resource info 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

nvCrcstatDevice0 11.1.230.5.1.29.3.1.7
device info 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvCrcstatRcsc1 11.1.230.5.1.29.3.1.8
resource info 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

nvCrcstatDevice1 11.1.230.5.1.29.3.1.9
device info 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvCrcstatRcsc2 11.1.230.5.1.29.3.1.10
resource info 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

nvCrcstatDevice2 11.1.230.5.1.29.3.1.11
device info 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvCrcstatReserve1 11.1.230.5.1.29.3.1.12
OBSOLETE - removed field.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvCrcstatReserve2 11.1.230.5.1.29.3.1.13
OBSOLETE - removed field.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvCrcstatCallngnum 11.1.230.5.1.29.3.1.14
calling party address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvCrcstatCalledsub 11.1.230.5.1.29.3.1.15
called party subaddress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvCrcstatCallngsub 11.1.230.5.1.29.3.1.16
calling party subaddress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvCrcstatL1prot 11.1.230.5.1.29.3.1.17
L1prot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noprot(1), dcprot(2), g711A(3), g711MU(4), g711(5), v110(6), v120(7)  

nvCrcstatL1mode 11.1.230.5.1.29.3.1.18
Layer 1 data mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nomode(1), dcmode(2), sync(3), async(4)  

nvCrcstatCroute 11.1.230.5.1.29.3.1.19
Croute record id used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrcstatRouting 11.1.230.5.1.29.3.1.20
Routing method.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noroute(1), callednum(2), callngnum(3), calledsub(4), callngsub(5)  

nvCrcstatDirection 11.1.230.5.1.29.3.1.21
Direction call was in.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2), unspec(3)  

nvCrfstat 11.1.230.5.1.30
OBJECT IDENTIFIER    

nvCrfstatMaxRec 11.1.230.5.1.30.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrfstatNumRec 11.1.230.5.1.30.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrfstatTable 11.1.230.5.1.30.3
Circuit failure status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvCrfstatEntry

nvCrfstatEntry 11.1.230.5.1.30.3.1
crfstat record indexed by record number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvCrfstatEntry  

nvCrfstatIndex 11.1.230.5.1.30.3.1.1
Index of crfstat record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrfstatCid 11.1.230.5.1.30.3.1.2
circuit connection identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrfstatCallednum 11.1.230.5.1.30.3.1.3
called party address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvCrfstatCallngnum 11.1.230.5.1.30.3.1.4
calling party address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvCrfstatCalledsub 11.1.230.5.1.30.3.1.5
called party subaddress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvCrfstatCallngsub 11.1.230.5.1.30.3.1.6
calling party subaddress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvCrfstatL1prot 11.1.230.5.1.30.3.1.7
L1prot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noprot(1), dcprot(2), g711A(3), g711MU(4), g711(5), v110(6), v120(7)  

nvCrfstatL1mode 11.1.230.5.1.30.3.1.8
Layer 1 data mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nomode(1), dcprot(2), sync(3), async(4)  

nvCrfstatCroute 11.1.230.5.1.30.3.1.9
Croute record id used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvCrfstatRouting 11.1.230.5.1.30.3.1.10
Routing method.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noroute(1), callednum(2), callngnum(3), calledsub(4), callngsub(5)  

nvCrfstatAddr 11.1.230.5.1.30.3.1.11
address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvCrfstatCause 11.1.230.5.1.30.3.1.12
circuit connection failure cause.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER crfNoRoute(2), crfTsAllocFail(3), crfRcscAllocFail(4), crfConAbort(5), crfConFail(6), dvNoGroup(7), dvBwRej(8), dvThrshRej(9), dvUnavail(10), frBwUnavail(11), portNoConn(12), scsaStuck(13), psReject(14), psChCrErr(15), dvNoPool(16), dvBadClass(17), dspHwUnavail(18), dspBadResrc(19), dspNoSetupI(20), dspRoRoNone(21), dspChCRspTO(22), dspChCRNoHw(23), dspChCrSyEr(24), dspChCrBitF(25), dspChCrDwlF(26), dspMsgNotPS(27), r2NoDspTs(28), r2ChCrErr(29), srcAborted(30), crfRsrcBusy(31), dspmFullLts(32), sigChCrErr(33), busy(34), noAnswer(35), tsUnavail(36), noDialtone(37), causeUnspecified(38)  

nvCrfstatRcsc0 11.1.230.5.1.30.3.1.13
resource info 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

nvCrfstatRcsc1 11.1.230.5.1.30.3.1.14
resource info 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

nvCrfstatRcsc2 11.1.230.5.1.30.3.1.15
resource info 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

nvCrfstatReserve1 11.1.230.5.1.30.3.1.16
OBSOLETE - removed field.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvCrfstatDirection 11.1.230.5.1.30.3.1.18
Direction record is for.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2), unspec(3)  

nvRrstat 11.1.230.5.1.31
OBJECT IDENTIFIER    

nvRrstatMaxRec 11.1.230.5.1.31.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRrstatNumRec 11.1.230.5.1.31.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRrstatTable 11.1.230.5.1.31.3
resouce registry (system registry) status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRrstatEntry

nvRrstatEntry 11.1.230.5.1.31.3.1
rrstat record indexed by record number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRrstatEntry  

nvRrstatIndex 11.1.230.5.1.31.3.1.1
Index of rrstat record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRrstatPoolname 11.1.230.5.1.31.3.1.2
resource pool name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvRrstatClass 11.1.230.5.1.31.3.1.3
resource pool class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER protocolStack(2), digitalModem(3), priCall(4), priDc(5)  

nvRrstatNumbers 11.1.230.5.1.31.3.1.4
number of resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRrstatConns 11.1.230.5.1.31.3.1.5
number of connected resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRrstatMaxcalls 11.1.230.5.1.31.3.1.6
Maximum number of connected resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRrstatNumIcalls 11.1.230.5.1.31.3.1.7
Total number of incoming calls processed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRrstatNumOcalls 11.1.230.5.1.31.3.1.8
Total number of outgoing calls processed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRrstatNumcalls 11.1.230.5.1.31.3.1.9
Total number of calls processed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRrstatAvgtime 11.1.230.5.1.31.3.1.10
Average length of call in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRrstatDtreset 11.1.230.5.1.31.3.1.15
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvModemprof 11.1.230.5.1.32
OBJECT IDENTIFIER    

nvModemprofMaxRec 11.1.230.5.1.32.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvModemprofNumRec 11.1.230.5.1.32.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvModemprofTable 11.1.230.5.1.32.3
modemconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvModemprofEntry

nvModemprofEntry 11.1.230.5.1.32.3.1
modemconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvModemprofEntry  

nvModemprofIndex 11.1.230.5.1.32.3.1.1
Index of modemconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvModemprofName 11.1.230.5.1.32.3.1.2
Modem Prof resource config name (name)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvModemprofRsrcpool 11.1.230.5.1.32.3.1.5
Resource pool name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvModemprofDspname 11.1.230.5.1.32.3.1.6
Device usage group name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvModemprofType 11.1.230.5.1.32.3.1.7
Modem modulation scheme (type) Default value is 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER modauto(1), v34(2), v32bis(3), v32(4), v23t75r12(5), v23t12r75(6), v22bis(7), v22(8), v21(9), b212a(10), b103(11), pautob(12), pautoc(13), v34bis(14), vpcm(15), v21rev(16), v110mod(21), v110b600(22), v110b1200(23), v110b2400(24), v110b4800(25), v110b7200(26), v110b9600(27), v110b12000(28), v110b14400(29), v110b19200(30), v110b48000(31), v110b56000(32)  

nvModemprofEc 11.1.230.5.1.32.3.1.8
Modem error correction option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), v42ec(2), mNPec(3), eitherec(4), autoec(5)  

nvModemprofDc 11.1.230.5.1.32.3.1.9
Modem data compression option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvModemprofMode 11.1.230.5.1.32.3.1.10
Modem sync / async option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sync(3), async(4), auto(8)  

nvModemprofCmpdtype 11.1.230.5.1.32.3.1.13
Modem companding type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mulaw(2), alaw(3), nocmpdt(4)  

nvModemprofTxlvl 11.1.230.5.1.32.3.1.14
Transmit level (txlvl) Default value is 13.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

nvModemprofRxthresh 11.1.230.5.1.32.3.1.15
Modem receive threshold (rxthresh) Default value is 38.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvModemprofAnston 11.1.230.5.1.32.3.1.17
Modem generate answer (anston) tone.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvModemprofAnstondur 11.1.230.5.1.32.3.1.18
Mode answer tone (anstondur) duration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

nvModemprofBildly 11.1.230.5.1.32.3.1.19
Modem wait to send answer (bildly) tone.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

nvModemprofStatus 11.1.230.5.1.32.3.1.20
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvModemprofFalbckchr 11.1.230.5.1.32.3.1.21
modem autorel fallback char.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..80  

nvIfStackInfo 11.1.230.5.1.33
OBJECT IDENTIFIER    

nvIfStackInfoNumRec 11.1.230.5.1.33.1
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIfStackInfoTable 11.1.230.5.1.33.2
modemconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIfStackInfoEntry

nvIfStackInfoEntry 11.1.230.5.1.33.2.1
IfStackInfo record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIfStackInfoEntry  

nvIfStackInfoHigherLI 11.1.230.5.1.33.2.1.1
highre layer interface number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIfStackInfoLowerLI 11.1.230.5.1.33.2.1.2
Lower layer interface number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIfStackInfoStatus 11.1.230.5.1.33.2.1.3
Status of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIfStackInfoRid 11.1.230.5.1.33.2.1.4
Record ID to get info on this
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialmap 11.1.230.5.1.34
OBJECT IDENTIFIER    

nvDialmapMaxRec 11.1.230.5.1.34.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialmapNumRec 11.1.230.5.1.34.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvDialmapTable 11.1.230.5.1.34.3
Dialmap table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDialmapEntry

nvDialmapEntry 11.1.230.5.1.34.3.1
Dialmap table record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDialmapEntry  

nvDialmapIndex 11.1.230.5.1.34.3.1.1
Index of dialmap record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialmapNumdelete 11.1.230.5.1.34.3.1.2
Number of digits to delete.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvDialmapAddprefix 11.1.230.5.1.34.3.1.3
Digits to add after digits deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..9)  

nvDialmapStatus 11.1.230.5.1.34.3.1.10
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvDspmalloc 11.1.230.5.1.35
OBJECT IDENTIFIER    

nvDspmallocMaxRec 11.1.230.5.1.35.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDspmallocNumRec 11.1.230.5.1.35.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDspmallocTable 11.1.230.5.1.35.3
Dspmalloc table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDspmallocEntry

nvDspmallocEntry 11.1.230.5.1.35.3.1
Dspmalloc table record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDspmallocEntry  

nvDspmallocIndex 11.1.230.5.1.35.3.1.1
Index of dspmalloc record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDspmallocDsptype 11.1.230.5.1.35.3.1.2
Type of DSP - kflex or V.90.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER kfModem(2), v90Modem(3)  

nvDspmallocWeight 11.1.230.5.1.35.3.1.3
Allocation proportion.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvDspmallocStatus 11.1.230.5.1.35.3.1.10
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvDialstat 11.1.230.5.1.36
OBJECT IDENTIFIER    

nvDialstatMaxRec 11.1.230.5.1.36.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialstatNumRec 11.1.230.5.1.36.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialstatTable 11.1.230.5.1.36.3
Dialstat table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDialstatEntry

nvDialstatEntry 11.1.230.5.1.36.3.1
Dialstat table record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDialstatEntry  

nvDialstatIndex 11.1.230.5.1.36.3.1.1
Index of Dialstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialstatRcscpool 11.1.230.5.1.36.3.1.2
Resource Name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..14)  

nvDialstatNcurrent 11.1.230.5.1.36.3.1.3
Number of dial-out Sessions currently occuring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvDialstatNcalling 11.1.230.5.1.36.3.1.4
Number of call attempts currently occuring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvDialstatTrace 11.1.230.5.1.36.3.1.5
Is trace enabled?
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2), busy(4)  

nvDialstatLastAddr 11.1.230.5.1.36.3.1.6
Last Called Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvDialstatLastCause 11.1.230.5.1.36.3.1.7
Last ISDN cause code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialstatLastDiag 11.1.230.5.1.36.3.1.8
Last X.25 diagnostic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialstatLastResponse 11.1.230.5.1.36.3.1.9
Last Response.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..9)  

nvDialstatNdialout 11.1.230.5.1.36.3.1.10
Number of dial-out sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNattempt 11.1.230.5.1.36.3.1.11
Number of call attempts. (May be multiple attempts per dialout request).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNsucceed 11.1.230.5.1.36.3.1.12
Number of successful dial-out attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNfail 11.1.230.5.1.36.3.1.13
Number of failed dial-out attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNcircfail 11.1.230.5.1.36.3.1.14
Number of times circuit creation failed immediately.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNcmderror 11.1.230.5.1.36.3.1.15
Number of fails due to error in dialout string command.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNdialtone 11.1.230.5.1.36.3.1.16
Number of fails due to no dialtone.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNbusy 11.1.230.5.1.36.3.1.17
Number of fails due to remote busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNnoRoute 11.1.230.5.1.36.3.1.18
Number of fails due to routing error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNnoModem 11.1.230.5.1.36.3.1.19
Number of Fails because no modem was available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNnoInput 11.1.230.5.1.36.3.1.20
Number of fails because of no user input within time limit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNinvnum 11.1.230.5.1.36.3.1.21
Number of fails because invalid user input received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNnoAnswer 11.1.230.5.1.36.3.1.22
Number of fails due to no answer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNmnegfail 11.1.230.5.1.36.3.1.23
Number of failed modem negotiation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNconnfail 11.1.230.5.1.36.3.1.24
Number of fails after ISDN connection for reasons other than modem negotiation failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatNmiscfail 11.1.230.5.1.36.3.1.25
Number of miscellaneous failures not counted elsewhere.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatMaxcall 11.1.230.5.1.36.3.1.26
Maximum number concurrently calling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDialstatAdSucctim 11.1.230.5.1.36.3.1.27
Average time for dial-out for successful dial-out request, in units of tenths of a second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialstatAdFailtim 11.1.230.5.1.36.3.1.28
Average time for dial-out for filaed cases, in units of tenths of a second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDialstatNabredial 11.1.230.5.1.36.3.1.29
number of aborted redials, JATE redial restriction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFrmrstatTable 11.1.230.5.1.37
Framer card statistics table definition. The actual framer card database has 17 tables. Each table uses name convention: frmrstat plus slot number. This table will combine 17 databases into one table. In order to support the actual framer card configuration, this table requires the slot number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvFrmrstatEntry

nvFrmrstatEntry 11.1.230.5.1.37.1
Framer card statistics record definition. The total record number is 17. If there is a framer card plugged in one of the slot, then the corresponding framer record is active. Otherwise the record is not active.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvFrmrstatEntry  

nvFrmrstatSlotIndex 11.1.230.5.1.37.1.1
Framer card slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatState 11.1.230.5.1.37.1.2
State of framer card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER free(1), dead(2), dying(3), up(4), download(6)  

nvFrmrstatFailCause 11.1.230.5.1.37.1.3
Reason for last failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), softfail(2), hardfail(3), download(6)  

nvFrmrstatResetTime 11.1.230.5.1.37.1.4
Date and Time of last framer card reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvFrmrstatNumFailures 11.1.230.5.1.37.1.5
Number of download attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatNumReloads 11.1.230.5.1.37.1.6
Number of successful reloads.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatTotalCalls 11.1.230.5.1.37.1.7
number of smartport calls made.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatCallsPresent 11.1.230.5.1.37.1.8
number of calls currently up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatNumPortUp 11.1.230.5.1.37.1.9
number of successful port ups.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatNumFailUp 11.1.230.5.1.37.1.10
number of failed port ups.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatNumTxFrames 11.1.230.5.1.37.1.11
number of frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatNumRxFrames 11.1.230.5.1.37.1.12
number of frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatNumTxBytes 11.1.230.5.1.37.1.13
Number of bytes transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrmrstatNumRxBytes 11.1.230.5.1.37.1.14
number of bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNas 11.1.230.5.2.1
OBJECT IDENTIFIER    

nvFrstat 11.1.230.5.5.1
OBJECT IDENTIFIER    

nvFrstatCurtime 11.1.230.5.5.1.1
Minutes into current 15-minute cycle Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrstatTxcurfps 11.1.230.5.5.1.2
Current snapshot of Tx Frames/Second Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrstatTxavgfps 11.1.230.5.5.1.3
Average Tx Frames/Second for 15-minute cycle Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrstatRxcurfps 11.1.230.5.5.1.4
Current snapshot of Rx Frames/Second Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrstatRxavgfps 11.1.230.5.5.1.5
Average Rx Frames/Second for 15-minute cycle Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrstatMtxcurfps 11.1.230.5.5.1.6
Current snapshot of mapped Tx Frames/Second Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrstatMtxavgfps 11.1.230.5.5.1.7
Average mapped Tx Frames/Second for 15-minute cycle Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrstatMrxcurfps 11.1.230.5.5.1.8
Current snapshot of mapped Rx Frames/Second Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrstatMrxavgfps 11.1.230.5.5.1.9
Average mapped Rx Frames/Second for 15-minute cycle Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrstatDtreset 11.1.230.5.5.1.10
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvFristat 11.1.230.5.5.2
OBJECT IDENTIFIER    

nvFristatMaxRec 11.1.230.5.5.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFristatNumRec 11.1.230.5.5.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFristatTable 11.1.230.5.5.2.3
fristat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvFristatEntry

nvFristatEntry 11.1.230.5.5.2.3.1
fristat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvFristatEntry  

nvFristatIndex 11.1.230.5.5.2.3.1.1
Index of Fristat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFristatPort 11.1.230.5.5.2.3.1.2
Physical Port
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvFristatOperstate 11.1.230.5.5.2.3.1.3
FRI Operational state Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unconnected(1), badFriConfig(2), idle(3), setup(4), active(5)  

nvFristatLmistate 11.1.230.5.5.2.3.1.4
LMI Operational state Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), normal(2), error(3)  

nvFristatCurseq 11.1.230.5.5.2.3.1.5
Transmitted LMI sequence number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFristatRcvseq 11.1.230.5.5.2.3.1.6
Received LMI sequence number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFristatErrorcounts 11.1.230.5.5.2.3.1.7
LMI errors during recorded history Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFristatRxexceszes 11.1.230.5.5.2.3.1.8
Too Large Incoming Frames Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFristatRxbaddlcis 11.1.230.5.5.2.3.1.9
Invalid dlci Incoming Frames Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFristatDtreset 11.1.230.5.5.2.3.1.10
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvFrvcstat 11.1.230.5.5.3
OBJECT IDENTIFIER    

nvFrvcstatMaxRec 11.1.230.5.5.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrvcstatNumRec 11.1.230.5.5.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrvcstatTable 11.1.230.5.5.3.3
frvcstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvFrvcstatEntry

nvFrvcstatEntry 11.1.230.5.5.3.3.1
frvcstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvFrvcstatEntry  

nvFrvcstatIndex 11.1.230.5.5.3.3.1.1
Index of Frvcstat
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrvcstatService 11.1.230.5.5.3.3.1.2
Connected Component ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvFrvcstatServiceid 11.1.230.5.5.3.3.1.3
Service Instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvFrvcstatFri 11.1.230.5.5.3.3.1.4
FRI of this PVC (FRICONF recnum)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrvcstatDlci 11.1.230.5.5.3.3.1.5
DLCI of this PVC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrvcstatStatus 11.1.230.5.5.3.3.1.6
PVC Operational State Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER free(1), badPvcConfig(2), disabled(3), badDLCI(4), operDisabled(5), friFull(6), noFri(7), friDown(8), friError(9), pvcInit(10), pvcDown(11), pvcUp(12), pvcInactive(13)  

nvFrvcstatTxcongstatus 11.1.230.5.5.3.3.1.7
Transmit Congestion Status Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), low(2), medium(3), high(4)  

nvFrvcstatRxbufdepletion 11.1.230.5.5.3.3.1.8
Receive Buffer Depletion Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrvcstatOutputrate 11.1.230.5.5.3.3.1.9
Output during last period (bytes) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrvcstatInputrate 11.1.230.5.5.3.3.1.10
Input during last period (bytes) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nvFrvcstatExcessdatas 11.1.230.5.5.3.3.1.11
Data over output limit Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFrvcstatTxframes 11.1.230.5.5.3.3.1.12
Transmitted Frame Counter Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFrvcstatRxframes 11.1.230.5.5.3.3.1.13
Received Frame Counter Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFrvcstatDrprxs 11.1.230.5.5.3.3.1.14
Received Frames Dropped Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFrvcstatDrprxdes 11.1.230.5.5.3.3.1.15
Received DE Frames Dropped Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFrvcstatDtreset 11.1.230.5.5.3.3.1.16
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvFriconf 11.1.230.5.5.4
OBJECT IDENTIFIER    

nvFriconfMaxRec 11.1.230.5.5.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFriconfNumRec 11.1.230.5.5.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFriconfTable 11.1.230.5.5.4.3
friconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvFriconfEntry

nvFriconfEntry 11.1.230.5.5.4.3.1
friconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvFriconfEntry  

nvFriconfIndex 11.1.230.5.5.4.3.1.1
Index of friconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFriconfPort 11.1.230.5.5.4.3.1.2
Physical Port (port)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvFriconfRsrcpool 11.1.230.5.5.4.3.1.3
Resource pool
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvFriconfMaxfrmsz 11.1.230.5.5.4.3.1.6
Maximum Frame Size (maxfrmsz) Default value is 140.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvFriconfLmitype 11.1.230.5.5.4.3.1.8
Style of LMI operation (lmitype) Default value is go4 (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nolmi(1), go4(2), ansi(3), itu(4)  

nvFriconfMode 11.1.230.5.5.4.3.1.9
Mode of FRI Operation (mode) Default value is user (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER user(1), net(2)  

nvFriconfDlci 11.1.230.5.5.4.3.1.11
LMI's DLCI (dlci) Default value is 1023.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1023  

nvFriconfnT1 11.1.230.5.5.4.3.1.12
LMI Polling Interval (nT1) Default value is 10.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

nvFriconfnT2 11.1.230.5.5.4.3.1.13
Max Time Between Polls (nT2) Default value is 15.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

nvFriconfnT3 11.1.230.5.5.4.3.1.14
Max Polls per nN4 (nT3) Default value is 20.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

nvFriconfnN1 11.1.230.5.5.4.3.1.19
LMI Full Status Poll Frequency (nN1) Default value is 6.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nvFriconfnN2 11.1.230.5.5.4.3.1.20
LMI Error Threshold (nN2) Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

nvFriconfnN3 11.1.230.5.5.4.3.1.21
LMI Error History Length (nN3) Default value is 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

nvFriconfnN4 11.1.230.5.5.4.3.1.22
Max Polls Within nT3 (nN4). Default value is 5.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFriconfnP1 11.1.230.5.5.4.3.1.23
Max PVCs allowed FRI (nP1) Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvFriconfStatus 11.1.230.5.5.4.3.1.29
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvFrvcconf 11.1.230.5.5.5
OBJECT IDENTIFIER    

nvFrvcconfMaxRec 11.1.230.5.5.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrvcconfNumRec 11.1.230.5.5.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrvcconfTable 11.1.230.5.5.5.3
frvcconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvFrvcconfEntry

nvFrvcconfEntry 11.1.230.5.5.5.3.1
frvcconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvFrvcconfEntry  

nvFrvcconfIndex 11.1.230.5.5.5.3.1.1
Index of frvcconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFrvcconfDlci 11.1.230.5.5.5.3.1.2
DLCI of this PVC (dlci)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1023  

nvFrvcconfFri 11.1.230.5.5.5.3.1.6
FRI of this PVC (fri)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvFrvcconfMappedpvc 11.1.230.5.5.5.3.1.8
Recnum of Mapped PVC (mappedpvc)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvFrvcconfEnable 11.1.230.5.5.5.3.1.11
Is this PVC enabled? (enable) Default value is yse (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvFrvcconfT 11.1.230.5.5.5.3.1.12
Rate Monitoring Period (t)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvFrvcconfBc 11.1.230.5.5.5.3.1.15
Committed Burst Size (bc)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvFrvcconfBe 11.1.230.5.5.5.3.1.16
Excess Burst Size (be)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvFrvcconfN 11.1.230.5.5.5.3.1.17
Incoming BECN Threshold (n)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvFrvcconfRxbufspac 11.1.230.5.5.5.3.1.20
Receive Buffer Space (rxbufspac) Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9400  

nvFrvcconfRxcgthres 11.1.230.5.5.5.3.1.21
Rcv Congestion Thrshld (rxcgthres)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

nvFrvcconfRxcgclear 11.1.230.5.5.5.3.1.22
Rcv Cong. Clear Thrshld (rxcgclear).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

nvFrvcconfStatus 11.1.230.5.5.5.3.1.27
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvIticstat 11.1.230.5.6.1
OBJECT IDENTIFIER    

nvIticstatMaxRec 11.1.230.5.6.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticstatNumRec 11.1.230.5.6.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticstatTable 11.1.230.5.6.1.3
iticstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIticstatEntry

nvIticstatEntry 11.1.230.5.6.1.3.1
iticstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIticstatEntry  

nvIticstatIndex 11.1.230.5.6.1.3.1.1
Index of iticstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticstatClassname 11.1.230.5.6.1.3.1.2
Name of class. This field identifies which class the statistics in this record pertain to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvIticstatNnccs 11.1.230.5.6.1.3.1.3
number of network connection commands. Total number of network originated calls to this class. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatNnfails 11.1.230.5.6.1.3.1.4
number of network connection failures. Total number of network connection commands that failed. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatNpassfails 11.1.230.5.6.1.3.1.5
number of password failures. Total number of password failures for this class. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatCurcalls 11.1.230.5.6.1.3.1.6
Current number of calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatAvgtime 11.1.230.5.6.1.3.1.7
Average number of seconds per call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatMaxcalls 11.1.230.5.6.1.3.1.8
Maximum concurrent calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatNumcalls 11.1.230.5.6.1.3.1.9
Total number of successful modem connctions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticstatDtreset 11.1.230.5.6.1.3.1.10
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvIticstatTcalls 11.1.230.5.6.1.3.1.11
Total number of hostcalls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatN300bd 11.1.230.5.6.1.3.1.12
300 up to 1200 baud calls received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatN1200bd 11.1.230.5.6.1.3.1.13
1200 up to 2400 baud calls received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatN2400bd 11.1.230.5.6.1.3.1.14
2400 up to 9600 baud calls received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatN9600bd 11.1.230.5.6.1.3.1.15
9600 up to 14400 baud calls received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatN14400bd 11.1.230.5.6.1.3.1.16
14400 up to 28800 baud calls received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatN28800bd 11.1.230.5.6.1.3.1.17
28800 baud calls and above received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatFailneg 11.1.230.5.6.1.3.1.18
Calls disconnected during modem negotiation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatTrmdscdat 11.1.230.5.6.1.3.1.19
Calls disconnected by terminal during data transfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatLoscarsu 11.1.230.5.6.1.3.1.20
Calls disconnected during setup phase.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatLoscarcip 11.1.230.5.6.1.3.1.21
Calls disconnected during connection phase.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatLoscardat 11.1.230.5.6.1.3.1.22
Calls disconnected during data transfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatTrmdscsu 11.1.230.5.6.1.3.1.23
Calls disconnected by terminal during setup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatTrmdsccip 11.1.230.5.6.1.3.1.24
Calls disconnected by terminal during modem negotiation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatNcurIncom 11.1.230.5.6.1.3.1.25
Number of Current Incoming Calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatNcurOutgo 11.1.230.5.6.1.3.1.26
Number of Current Outgoing Calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatMaxIncom 11.1.230.5.6.1.3.1.27
Maximum number of Incoming Calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatMaxOutgo 11.1.230.5.6.1.3.1.28
Maximum number of Outgoing Calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatNumIncom 11.1.230.5.6.1.3.1.29
Number of Successful Incoming Calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatNumOutgo 11.1.230.5.6.1.3.1.30
Number of Successful Outgoing Calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIticstatNncr 11.1.230.5.6.1.3.1.31
number of network connection commands. Count of virtual circuits initiated from ITI port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstat 11.1.230.5.6.2
OBJECT IDENTIFIER    

nvItipstatMaxRec 11.1.230.5.6.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatNumRec 11.1.230.5.6.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatTable 11.1.230.5.6.2.3
itipstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvItipstatEntry

nvItipstatEntry 11.1.230.5.6.2.3.1
itipstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvItipstatEntry  

nvItipstatIndex 11.1.230.5.6.2.3.1.1
Index of itipstat
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatPortname 11.1.230.5.6.2.3.1.2
Name of port. This field identifies which port the statistics in this record pertain to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvItipstatReserve1 11.1.230.5.6.2.3.1.3
OBSOLETE - removed field.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvItipstatAcct 11.1.230.5.6.2.3.1.4
accounting id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItipstatClassname 11.1.230.5.6.2.3.1.5
iti class: Current user class using this port. NOTE: Order of the following fields corresponds to subset of NSCC structure. The code uses block copies for these fields and assumes the above condition is always true.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItipstatSrcadr 11.1.230.5.6.2.3.1.6
source address: Source network address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvItipstatDstadr 11.1.230.5.6.2.3.1.7
destination address: Destination network address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvItipstatTxPsze 11.1.230.5.6.2.3.1.8
packet size: Transmit Packet size used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pktUndefined(1), pkt16(5), pkt32(6), pkt64(7), pkt128(8), pkt256(9), pkt512(10), pkt1024(11), pkt2048(12), pkt4096(13)  

nvItipstatRxPsze 11.1.230.5.6.2.3.1.9
packet size: Receive Packet size used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pktUndefined(1), pkt16(5), pkt32(6), pkt64(7), pkt128(8), pkt256(9), pkt512(10), pkt1024(11), pkt2048(12), pkt4096(13)  

nvItipstatTxWsze 11.1.230.5.6.2.3.1.10
window size: transmit Window size used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

nvItipstatRxWsze 11.1.230.5.6.2.3.1.11
window size: receive Window size used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

nvItipstatTxTput 11.1.230.5.6.2.3.1.12
throughput class: transmit Throughput class used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcUndefined(1), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13)  

nvItipstatRxTput 11.1.230.5.6.2.3.1.13
throughput class: receive Throughput class used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcUndefined(1), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13)  

nvItipstatCugtype 11.1.230.5.6.2.3.1.14
cug type: Type of closed user group call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noCug(1), cug(2), cugWithOutgoingAccess(3), bilateralCug(4)  

nvItipstatCug 11.1.230.5.6.2.3.1.15
cug: Closed group identifier. Valid only if previous flag is true.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatRpoa 11.1.230.5.6.2.3.1.16
rpoa: DNIC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatRevf 11.1.230.5.6.2.3.1.17
reverse charging: Flag indicating if reverse charging is being used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2), busied(3), notapp(4)  

nvItipstatPrio 11.1.230.5.6.2.3.1.18
priority call: Flag indicating if priority calling is beng used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2), busied(3), notapp(4)  

nvItipstatFast 11.1.230.5.6.2.3.1.19
fast select: Type of fast select.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noFastSelect(1), fastSelect(2), fastSelectRestricted(3)  

nvItipstatPvc 11.1.230.5.6.2.3.1.20
pvc code: Permanent Virtual Circuit Code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatNdcode 11.1.230.5.6.2.3.1.21
network disconnect code. Value of the last network disconnnect code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatNddiag 11.1.230.5.6.2.3.1.22
network diag code: Value of the last network diagnostic code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatNdorigin 11.1.230.5.6.2.3.1.23
disconnect origin: Whether disconnect was local or remote directive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatNrcode 11.1.230.5.6.2.3.1.24
network reset code: Value of the last network reset code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatNrdiag 11.1.230.5.6.2.3.1.25
network reset diag: Value of the last network reset diagnostic code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItipstatOrg 11.1.230.5.6.2.3.1.26
call originator. Flag indicating who originated the call in progress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2), busied(3), notapp(4)  

nvItipstatState 11.1.230.5.6.2.3.1.27
iti internal state: Internal state of the ITI interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(2), awaitingCommand(3), awaitingSelection(4), awaitingUserid(5), awaitingPassword(6), dataTransfer(8), invitationToClear(9), padCommandAfterEscape(10), padCommand(11), awaitingTerminalConnectResponse(12), awaitingFastSelectUserData(13), loopback(14), awaitingDiscBeforeCallBack(15), awaitingCallBack(16), awaitingDialoutUserInput(17), unused2(18), unused3(19), unused4(20), unused5(21), loginServicesControlMode(22), callReselection(23), scanLoginString(24), waitOutputDoneBeforeIdel(25), dlspcWaitCallClearFromDUI(26), escFromConnInProgress(27), waitRadiusResponseToMsg(28), waitUserInputForRadChallenge(29), connectingWaitForModemTrain(30)  

nvItipstatUserdata 11.1.230.5.6.2.3.1.28
user data: User specified user data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

nvItipstatUsername 11.1.230.5.6.2.3.1.29
iti class: Current user using this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItipstatX28type 11.1.230.5.6.2.3.1.30
command standard.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER undefined(1), pci(2), ccitt1976(3), ccitt1980(4), ccitt1984(5), telenet(6), datapac(7), micom(8), dynapac(9), telepac(10), amdahl(11), telematics(12), hughes(13), otc(14), consat(15), dlspc(16), pos(17), dcall(18), pacnet(19)  

nvItipstatX3type 11.1.230.5.6.2.3.1.31
parameter standard: Current X.3 parameter standard being used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER undefined(1), pci(2), ccitt1976(3), ccitt1980(4), ccitt1984(5), telenet(6), datapac(7), micom(8), dynapac(9), telepac(10), amdahl(11), telematics(12), hughes(13), otc(14), consat(15), dlspc(16), pos(17), dcall(18), pacnet(19)  

nvItipstatReservet 11.1.230.5.6.2.3.1.32
OBSOLETE - removed field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvItipstatNtccs 11.1.230.5.6.2.3.1.33
number of term connection commands. Count of service requests received from the terminal. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNnccs 11.1.230.5.6.2.3.1.34
number of network connection cmds. Count of service requests received from the network. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNnfails 11.1.230.5.6.2.3.1.35
number of network connection fails. Count of network call failures. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNtxpaks 11.1.230.5.6.2.3.1.36
number of transmitted packets (to network). Number of packets sent on the network. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNrxpaks 11.1.230.5.6.2.3.1.37
number of received packets (from network). Number of packets received from the network. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNtxresets 11.1.230.5.6.2.3.1.38
number of transmitted resets. Number of resets originated. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNrxresets 11.1.230.5.6.2.3.1.39
number of received resets. Number of resets received from network. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNctxpaks 11.1.230.5.6.2.3.1.40
number of current transmitted packets (to network). Number of packets send over the network during current terminal session. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNcrxpaks 11.1.230.5.6.2.3.1.41
number of current received packets (from network). Number of packets received from the network during current terminal session. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNctxresets 11.1.230.5.6.2.3.1.42
number of current transmitted resets. Number of resets originated during current terminal session. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNcrxresets 11.1.230.5.6.2.3.1.43
number of current received resets. Number of resets received during current terminal session. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNinputs 11.1.230.5.6.2.3.1.44
number of input characters. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNoutputs 11.1.230.5.6.2.3.1.45
number of output characters. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatParam 11.1.230.5.6.2.3.1.46
Copy of the current settings of the X.3 parameters (EX standard) for this port. This byte array must contain at least P_MAX + 1 bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..140)  

nvItipstatPreparam 11.1.230.5.6.2.3.1.47
Copy of X.3 parameters that were in effect before the current call (if any) was made. These values are restored (back to param) after the call is cleared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..140)  

nvItipstatDtreset 11.1.230.5.6.2.3.1.48
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvItipstatId 11.1.230.5.6.2.3.1.49
Address of ITI control block.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItipstatNtconn 11.1.230.5.6.2.3.1.50
Number of terminal connections. Number of times modem successfully trained.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNtdc 11.1.230.5.6.2.3.1.51
Number of terminal disconnect commands. Number of time terminal disconnected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNncr 11.1.230.5.6.2.3.1.52
Number of network connection responses. Count of virtual circuits initiated from ITI port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItipstatNtimeout 11.1.230.5.6.2.3.1.53
Number of disconnects caused by ITI timeout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItiustat 11.1.230.5.6.5
OBJECT IDENTIFIER    

nvItiustatMaxRec 11.1.230.5.6.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiustatNumRec 11.1.230.5.6.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiustatTable 11.1.230.5.6.5.3
itiustat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvItiustatEntry

nvItiustatEntry 11.1.230.5.6.5.3.1
itiustat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvItiustatEntry  

nvItiustatIndex 11.1.230.5.6.5.3.1.1
Index of itiustat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiustatUsername 11.1.230.5.6.5.3.1.2
Name of user. This field identifies which user the statistics in this record pertain to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..10)  

nvItiustatNcalls 11.1.230.5.6.5.3.1.3
number of calls made. Total number of calls initiated by user Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItiustatNpassfails 11.1.230.5.6.5.3.1.4
number of password failures. Total number of password failures. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItiustatNcallbacks 11.1.230.5.6.5.3.1.5
number of callbacks. Total number of callbacks to this user. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItiustatDuration 11.1.230.5.6.5.3.1.6
length of time used by user. Total number of minutes of time (*100*60). Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nvItiustatNtxpaks 11.1.230.5.6.5.3.1.7
number of transmitted packets (to network). Total number packets sent by this user over the network. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItiustatNrxpaks 11.1.230.5.6.5.3.1.8
number of received packets (from network). Total number packets received by this user over the network. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvItiustatDtreset 11.1.230.5.6.5.3.1.9
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvDlspcstat 11.1.230.5.6.6
OBJECT IDENTIFIER    

nvDlspcstatMaxRec 11.1.230.5.6.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlspcstatNumRec 11.1.230.5.6.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlspcstatTable 11.1.230.5.6.6.3
dlspcstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDlspcstatEntry

nvDlspcstatEntry 11.1.230.5.6.6.3.1
dlspcstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDlspcstatEntry  

nvDlspcstatIndex 11.1.230.5.6.6.3.1.1
Number of dial records.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlspcstatNports 11.1.230.5.6.6.3.1.2
Number of dial ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlspcstatNidle 11.1.230.5.6.6.3.1.3
Number of idle dial ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDuistat 11.1.230.5.6.7
OBJECT IDENTIFIER    

nvDuistatMaxRec 11.1.230.5.6.7.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDuistatNumRec 11.1.230.5.6.7.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDuistatTable 11.1.230.5.6.7.3
duistat file statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDuistatEntry

nvDuistatEntry 11.1.230.5.6.7.3.1
Duistat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDuistatEntry  

nvDuistatIndex 11.1.230.5.6.7.3.1.1
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDuistatType 11.1.230.5.6.7.3.1.2
Type of DUI Circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), alternate(2)  

nvDuistatNua 11.1.230.5.6.7.3.1.3
Last address used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvDuistatState 11.1.230.5.6.7.3.1.4
State of DUI Circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2), calling(3)  


nvDuistatLcn 11.1.230.5.6.7.3.1.6
LCN of virual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvDuistatLastcause 11.1.230.5.6.7.3.1.7
Last clear cause code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvDuistatLastdiag 11.1.230.5.6.7.3.1.8
Last clear diagnostic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvDuistatNmnxtcall 11.1.230.5.6.7.3.1.9
Number of minutes until next call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvDuistatNretries 11.1.230.5.6.7.3.1.10
Number of retries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDuistatNrejects 11.1.230.5.6.7.3.1.11
Number of rejects.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDuistatNaccepts 11.1.230.5.6.7.3.1.12
Number of accepts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDuistatNinvmsgs 11.1.230.5.6.7.3.1.13
Number of invalid DUI messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDuistatNunxmsgs 11.1.230.5.6.7.3.1.14
Number of unexpected DUI messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDuistatDtreset 11.1.230.5.6.7.3.1.15
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvItiport 11.1.230.5.6.16
OBJECT IDENTIFIER    

nvItiportMaxRec 11.1.230.5.6.16.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiportNumRec 11.1.230.5.6.16.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiportTable 11.1.230.5.6.16.3
itiport file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvItiportEntry

nvItiportEntry 11.1.230.5.6.16.3.1
itiport record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvItiportEntry  

nvItiportIndex 11.1.230.5.6.16.3.1.1
Index of itiport file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiportName 11.1.230.5.6.16.3.1.2
Name of ITI instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvItiportEnable 11.1.230.5.6.16.3.1.3
ndicates whether port is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvItiportIticlass 11.1.230.5.6.16.3.1.5
Class of Service associated with ITI port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItiportRsrcpool 11.1.230.5.6.16.3.1.6
Name of Resource Pool.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItiportPortname 11.1.230.5.6.16.3.1.7
Name of physical port or Device Usage Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItiportTimer1 11.1.230.5.6.16.3.1.8
TID timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiportMinbspace 11.1.230.5.6.16.3.1.9
Modem Train timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2000..20000  

nvItiportMaxbspace 11.1.230.5.6.16.3.1.10
Maximum preallocated buffer space.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5000..50000  

nvItiportFclevel 11.1.230.5.6.16.3.1.11
Buffer space left which causes flow control.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 500..5000  

nvItiportMode 11.1.230.5.6.16.3.1.12
Port mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER m8N1(1), m7E1(2), m7O1(3), m7M1(4), m7S1(5), m8G1(7), mAP1(8)  

nvItiportTimer0 11.1.230.5.6.16.3.1.13
TID timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiportTimer2 11.1.230.5.6.16.3.1.14
TID timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvDportstat 11.1.230.5.6.8
OBJECT IDENTIFIER    

nvDportstatMaxRec 11.1.230.5.6.8.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDportstatNumRec 11.1.230.5.6.8.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDportstatTable 11.1.230.5.6.8.3
Dportstat file statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDportstatEntry

nvDportstatEntry 11.1.230.5.6.8.3.1
Dportstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDportstatEntry  

nvDportstatIndex 11.1.230.5.6.8.3.1.1
a. index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDportstatPortname 11.1.230.5.6.8.3.1.2
Port name
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..6)  

nvDportstatSetstate 11.1.230.5.6.8.3.1.3
State the port was last set to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER offline(1), online(2), locked(3)  

nvDportstatIntfstate 11.1.230.5.6.8.3.1.4
Physical port state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2), busied(3), notApplicable(4)  

nvDportstatChstate 11.1.230.5.6.8.3.1.5
Channel state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), connectedDuiHost(2), connectingUserSelectedHost(3), escapedFromConnectionInProgress(4), connectedUserSelectedHost(5), escapedDataState(6), portDisabled(7)  

nvDportstatDuihost 11.1.230.5.6.8.3.1.6
Type of DUI host
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), alternate(2)  

nvDportstatDuistatus 11.1.230.5.6.8.3.1.7
Status of DUI port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

nvDportstatPorttype 11.1.230.5.6.8.3.1.8
Type of port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER publicSwitched(2), directConnect(3), passwordProtectedDirect(4)  

nvDportstatCli 11.1.230.5.6.8.3.1.11
Calling line identifier
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvDportstatResetdate 11.1.230.5.6.8.3.1.12
Date when statistics were last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvDportstatUptime 11.1.230.5.6.8.3.1.13
Number of minutes port active
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nvDportstatDowntime 11.1.230.5.6.8.3.1.14
Number of minutes port idle
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nvDportstatSessions 11.1.230.5.6.8.3.1.15
Number of sessions
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDportstatIncalls 11.1.230.5.6.8.3.1.16
Number of incoming calls
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDportstatOutcalls 11.1.230.5.6.8.3.1.17
Number of outgoing calls
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDportstatDtreset 11.1.230.5.6.8.3.1.18
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvIticlass 11.1.230.5.6.9
OBJECT IDENTIFIER    

nvIticlassMaxRec 11.1.230.5.6.9.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticlassNumRec 11.1.230.5.6.9.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticlassTable 11.1.230.5.6.9.3
iticlass file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIticlassEntry

nvIticlassEntry 11.1.230.5.6.9.3.1
iticlass record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIticlassEntry  

nvIticlassIndex 11.1.230.5.6.9.3.1.1
Index of iticlass record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticlassClassname 11.1.230.5.6.9.3.1.2
Class Name (classname) This field contains a user's name. If a default user id is not specified in the PORT record, ITI will ask the user to enter a User Name. The entered value is matched against the records in this file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvIticlassAcctsigl 11.1.230.5.6.9.3.1.3
Accounting Service Signal (acctsigl) Default value is 2+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), demand(3), on(4), dmand1(5), on1(6)  

nvIticlassActonloss 11.1.230.5.6.9.3.1.4
Action on Data Loss (actonloss) Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ignore(2), clear(3), reset(4), discon(5)  

nvIticlassBannerid 11.1.230.5.6.9.3.1.5
Connect Banner Identification (bannerid) This parameter indicates the herald message that is to be send to the port upon activation. This value is an index into string storage. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassBreaksgnl 11.1.230.5.6.9.3.1.6
BREAK Character Signal Id (breaksgnl)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassCalmethod 11.1.230.5.6.9.3.1.7
Allowed Calling Method (calmethod) Parameter to control the restriction of outgoing call methods. Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER norm(2), abrv(3), direct(4), pvc(5), teleneta(6), special(7), telenb(8), telenc(9), login(10), pad(11), telkom(12)  

nvIticlassClasmsgid 11.1.230.5.6.9.3.1.8
Class Info Message Id (clasmsgid) This parameter controls the facility that is used to send a greeting message to users successfully connecting to the PAD. A terminal port will send the message to the terminal while a host port will send it across the virtual call to the user. The value is an index into string storage. If the specified string contains the two consecutive characters '%s' then the first occurance of those two characters will be replaced by a string naming the port. This may be usefull when a user wishes to know exactly what the remote destination port is when the destination port is a member of a hunt group. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassClaspaswd 11.1.230.5.6.9.3.1.9
Class Password (claspaswd) This field contains the password associated with this user. When a userid and password are prompted for then the values supplied by the user must match the USERNAME and PASSWORD fields of one of the records in the nvIticlass file. If no match is made then access is denied. If this field is NULL then only the user's name is required and the supplied password is not checked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvIticlassCmdtimout 11.1.230.5.6.9.3.1.10
X.28 Command Timeout (cmdtimout) Timeout value (in seconds) when waiting for user to enter a command. If the value is zero,the command timeout facility is disabled. Default value is 60.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..500  

nvIticlassCug 11.1.230.5.6.9.3.1.11
Closed User Group Identifier (cug) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassDatacmd 11.1.230.5.6.9.3.1.12
Data Command (datacmd) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassDefwsze 11.1.230.5.6.9.3.1.13
Default Window Size (defwsze) This field specifies the window size to be used when transmitting packets. It is the maximum number packets that can be transmitted before an acknowledgement is received. Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

nvIticlassDefpsze 11.1.230.5.6.9.3.1.14
Default Packet Size (defpsze) This field specifies which packet size to use when packetizing data to be sent accross a virtual circuit. Default value is 7+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b16(5), b32(6), b64(7), b128(8), b256(9), b512(10), b1024(11)  

nvIticlassDevtype 11.1.230.5.6.9.3.1.15
Device Type (devtype) This field is used to control ITI actions depending upon whether the port is connected to a host or terminal. For example,a terminal interface will recognize Break,while a host interface may have to generate one. Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER term(2), host(3)  

nvIticlassExitcmd 11.1.230.5.6.9.3.1.16
Exit Command (exitcmd) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassFastsel 11.1.230.5.6.9.3.1.17
Fast Select Calling (fastsel) This field determines whether fast select calls may be placed or received Default value is 4+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), inallow(3), outallow(4), allowed(5)  

nvIticlassIchrg 11.1.230.5.6.9.3.1.18
Incoming Charging Restriction (ichrg) This field controls the incoming charging options allowed for this session. Normally used on a host interface. Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER iall(2), inorm(3), irev(4)  

nvIticlassInactivty 11.1.230.5.6.9.3.1.19
Data Mode Inactivity Timeout (inactivty) Timeout value (in minutes) when waiting for data transfer after call has been connected. If set to zero then no timeout occurs. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIticlassIncbar 11.1.230.5.6.9.3.1.20
Incoming Call Restriction (incbar) This field is used to bar specified incoming calls. Normally used on a host interface. Default value is 2+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inbar(2), inallow(3), inx28(4)  

nvIticlassInitcmd 11.1.230.5.6.9.3.1.21
Initial Automatic Command Id (initcmd) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassMaskstrng 11.1.230.5.6.9.3.1.22
string containing echo mask sequence Default value is 0. string MUST be defined BEFORE it can be referenced in this field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassMaxpsze 11.1.230.5.6.9.3.1.23
Maximum Packet Size (maxpsze) This field specifies which packet size to use when packetizing data to be sent accross a virtual circuit. Default value is 7+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b16(5), b32(6), b64(7), b128(8), b256(9), b512(10), b1024(11)  

nvIticlassMaxwsze 11.1.230.5.6.9.3.1.24
Maximum Window Size (maxwsze) This field specifies the window size to be used when transmitting packets. It is the maximum number packets that can be transmitted before an acknowledgement is received. Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

nvIticlassOchrg 11.1.230.5.6.9.3.1.25
Outgoing Charging Restriction (ochrg) This field controls the outgoing charging options permitted during this session. Normally used on a terminal interface. Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER oall(2), onorm(3), orev(4)  

nvIticlassOutbar 11.1.230.5.6.9.3.1.26
Outgoing Call Restriction (outbar) This field is used to bar specified outgoing calls. Normally used on a terminal interface. Default value is 3+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outone(2), outbar(3), outallow(4)  

nvIticlassPrefixid 11.1.230.5.6.9.3.1.27
Service Signal Prefix Id (prefixid) This parameter indicates the prefix string that is prefixed to all replies from ITI. This value is an index into string storage. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassProfile 11.1.230.5.6.9.3.1.28
Initial X.3 Parameter Profile (profile) This field specifies which X.3 parameter profile is to be used for the session. The terminal parameter table is initialized with the specified values. Users are free to change their own parameters. Whenever a session is terminated,via a timeout,a broken connection or a cleared call,the X.3 profile is reloaded for the user when the Network Processor is next accessed. This facility is used by both terminal and host interfaces to set up initial parameters. This field is an index into the ITIPROF file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvIticlassPromptid 11.1.230.5.6.9.3.1.29
X.28 Prompt Identification (promptid) This parameter indicates the prompt to be used to solicit a user response. This value is an index into string storage. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassPvcid 11.1.230.5.6.9.3.1.30
PVC Identifier (pvcid) This field is used to select a network provided permanent virtual circuit for the session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassRejectid 11.1.230.5.6.9.3.1.31
Reject Service Message Id (rejectid) This field controls the facility that is used to send a service refusal message to the user and to disconnect the call. An example of use would be on a host pad when the host is down. A terminal port will send the message to the terminal and clear the physical connection. A host port will send the message across the virtual call to the user, and follow it by an invitation to clear. The value is an index into string storage. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassRpoacode 11.1.230.5.6.9.3.1.32
RPOA Code (rpoacode) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassRpoatype 11.1.230.5.6.9.3.1.33
RPOA Type (rpoatype) Default value is 2+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), file(3), restrict(4)  

nvIticlassSecurity 11.1.230.5.6.9.3.1.34
Access Method (security) Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), class(3), user(4), callback(5), nui(6), radius(7), usrnui(8)  

nvIticlassTermtype 11.1.230.5.6.9.3.1.35
Terminal Type (termtype) Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(2), apacs(3), cdapacs(4), cdx28(5), epapacs(6)  

nvIticlassX28type 11.1.230.5.6.9.3.1.36
X.28 Command Set (x28type) Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pci(2), c76(3), c80(4), c84(5), telenet(6), datapac(7), micom(8), dynapac(9), telepac(10), amdahl(11), telematics(12), hughes(13), otc(14), consat(15), dlspc(16), pos(17), dcall(18), pacnet(19)  

nvIticlassX3type 11.1.230.5.6.9.3.1.37
X.3 Parameter Profile Type (x3type) Many implementations of X.3 may be found in today's public data networks. A parameter on one network may mean something different on another one. Or the allowable values may be different. This field selects which parameter standard is to be used in the X.28 (user interface) and X.29 (remote computer) interfaces. It is important that a user know and conform to the parameter standard being used by a remote PAD. Otherwise commands sent from the remote PAD to set local parameters may not be interpreted properly. Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pci(2), ccitt1976(3), ccitt1980(4), ccitt1984(5), telenet(6), datapac(7), micom(8), dynapac(9), telepac(10), amdahl(11), telematics(12), hughes(13), otc(14), consat(15), dlspc(16), pos(17), dcall(18), pacnet(19)  

nvIticlassXoffin 11.1.230.5.6.9.3.1.38
Input XOFF Character (xoffin) Second user selectable XOFF charcter. This character functions in an input only capacity and is not output by the PAD as an XOFF chaacter. Default value is 19.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIticlassXoffout 11.1.230.5.6.9.3.1.39
Output XOFF Character (xoffout) User selectable XOFF character. Default value is 19.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIticlassXonin 11.1.230.5.6.9.3.1.40
Input XON Character (xonin) Second user selectable XON charcter. This character functions in an input only capacity and is not output by the PAD as an XON character. Default value is 17.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIticlassXonout 11.1.230.5.6.9.3.1.41
Output XON Character (xonout) User selectable XON character. Default value is 17.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIticlassTidprompt 11.1.230.5.6.9.3.1.42
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassStatus 11.1.230.5.6.9.3.1.43
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvIticlassEscchar 11.1.230.5.6.9.3.1.44
escape character use default is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIticlassInvclrcmd 11.1.230.5.6.9.3.1.45
clear Command (initcmd) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassX29mskstr 11.1.230.5.6.9.3.1.46
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassDroptimer 11.1.230.5.6.9.3.1.47
length of time before disconnecting a call default 0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIticlassClasmode 11.1.230.5.6.9.3.1.48
Padding.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER m8N1(1), m7E1(2), m7O1(3), m7M1(4), m7S1(5), m8G1(7), mAP1(8), unused(16)  

nvIticlassDialout 11.1.230.5.6.9.3.1.49
dial-out string
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticlassCallingid 11.1.230.5.6.9.3.1.50
What to do with call id.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(2), userdata(3)  

nvIticlassAcctng 11.1.230.5.6.9.3.1.51
Accounting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noacct(1), usage(2), billng(3), both(4)  

nvIticlassInvclrtim 11.1.230.5.6.9.3.1.52
Timeout for Invitation to Clear
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIticlassComfac 11.1.230.5.6.9.3.1.53
Lower or Upper case service signals. lcfac = lower case with fac ucfac = upper case with fac lcnofac = lower case with no fac ucnofac = upper case no fac.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lcfac(1), ucfac(2), lcnofac(3), ucnofac(4)  

nvIticmd 11.1.230.5.6.10
OBJECT IDENTIFIER    

nvIticmdMaxRec 11.1.230.5.6.10.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticmdNumRec 11.1.230.5.6.10.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticmdTable 11.1.230.5.6.10.3
iticmd file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIticmdEntry

nvIticmdEntry 11.1.230.5.6.10.3.1
iticmd record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIticmdEntry  

nvIticmdIndex 11.1.230.5.6.10.3.1.1
Index of iticmd record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticmdCommand 11.1.230.5.6.10.3.1.2
Command Mnemonic (command) Command name,this string is entered by the user and is matched against entries in this file. If successful,the matched string is taken as user input and processed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvIticmdClass 11.1.230.5.6.10.3.1.3
Class of Service (class) Name of class that owns command.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvIticmdStringid 11.1.230.5.6.10.3.1.4
Full Command Name Id (stringid) Index into string storage for replacement value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticmdStatus 11.1.230.5.6.10.3.1.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvIticonf 11.1.230.5.6.11
OBJECT IDENTIFIER    

nvIticonfMaxRec 11.1.230.5.6.11.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticonfNumRec 11.1.230.5.6.11.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticonfTable 11.1.230.5.6.11.3
iticonf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIticonfEntry

nvIticonfEntry 11.1.230.5.6.11.3.1
iticonf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIticonfEntry  

nvIticonfIndex 11.1.230.5.6.11.3.1.1
Index of iticonf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIticonfNumcopy 11.1.230.5.6.11.3.1.2
Number of Simultaneous Copies (numcopy) This field specifies how many ITI ports may be copying network data at one time. Default value is 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

nvIticonfBroadcast 11.1.230.5.6.11.3.1.3
Broadcast Message Id (broadcast) This field identifies a string which is to be broadcast to a port following a service request but before security checking. Replacing the nvIticonf record will cause the message to be broadcast to all active iti ports that have service signals enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticonfItiswitch 11.1.230.5.6.11.3.1.4
ITI Switch (itiswitch) This field will be used to tell NBUS whether outgoing calls can be looped back (ITI to ITI calls allowed) Default value is ysr (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvIticonfPadaddr 11.1.230.5.6.11.3.1.5
PAD Address Field (padaddr)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..6)  

nvIticonfDnic 11.1.230.5.6.11.3.1.6
Data Network Identification Code (dnic) DNIC number when calmethod=special in nvIticlass file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1000..9999  

nvIticonfConfigstr 11.1.230.5.6.11.3.1.7
CONSAT facility mapping string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticonfValserver 11.1.230.5.6.11.3.1.8
address of validation server Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIticonfV120p11 11.1.230.5.6.11.3.1.10
64k 1, p11 for v.120 set for 64000 urate 2, p11 for v.120 from user rate in ISDN
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER k64k(1), urate(2)  

nvItimap 11.1.230.5.6.12
OBJECT IDENTIFIER    

nvItimapMaxRec 11.1.230.5.6.12.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItimapNumRec 11.1.230.5.6.12.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItimapTable 11.1.230.5.6.12.3
itimap file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvItimapEntry

nvItimapEntry 11.1.230.5.6.12.3.1
itimap record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvItimapEntry  

nvItimapIndex 11.1.230.5.6.12.3.1.1
Index of itimap record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItimapNetaddr 11.1.230.5.6.12.3.1.2
Network X.121 Address (netaddr) This field contains the pattern against which the incoming network address is matched.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvItimapUserdata 11.1.230.5.6.12.3.1.3
User Data (userdata) This field contains the pattern against which the associated call user data is matched.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvItimapClass 11.1.230.5.6.12.3.1.4
Class of Port Assignment (class) This field indicates which ITI 'user' is associated with the network address and call user data. If the PORT field in this record is NULL then the actual port is located by processing the itihunt file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItimapStatus 11.1.230.5.6.12.3.1.5
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvItiprof 11.1.230.5.6.13
OBJECT IDENTIFIER    

nvItiprofMaxRec 11.1.230.5.6.13.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiprofNumRec 11.1.230.5.6.13.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiprofTable 11.1.230.5.6.13.3
itiprof file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvItiprofEntry

nvItiprofEntry 11.1.230.5.6.13.3.1
itiprof record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvItiprofEntry  

nvItiprofIndex 11.1.230.5.6.13.3.1.1
Index of itiprof record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiprofName 11.1.230.5.6.13.3.1.2
Profile Name (name) Name of profile. Used by ITI 'prof' command to locate specified record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItiprofP1 11.1.230.5.6.13.3.1.3
PAD Recall Character (p1) This parameter indicates whether or not the transmission of a DLE character (ASCII value of 16.) from the terminal to the PAD is recognized as an escape from the data transfer state. If so,transmission of DLE will cause the virtual call to be suspended, allowing the terminal user to send commands to the PAD. (0) = No escape allowed (1) = Escape allowed Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP2 11.1.230.5.6.13.3.1.4
Echo Enable/Disable (p2) This parameter indicates to the PAD whether or not the terminal input data is to be echoed. If so,characters typed in from the terminal keyboard will be transmitted back to the terminal as well as being interpreted by the PAD. Transmission costs can be reduced by having the PAD echo characters rather than having a remote host doing the echoing. (0) = No echo (1) = Echo Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP3 11.1.230.5.6.13.3.1.5
Packet Forwarding Characters (p3) This parameter indicates to the PAD the set of terminal generated characters that will cause data to be forwarded to the destination. When a data forwarding signal is received then all buffered data is assembled into a packet and sent to the destination. (0) = No signals (2) = CR (6) = CR,ESC,BEL,ENQ,ACK (18) = CR,EOT,ETX (126) = all control characters (ASCII values from 1. to 31.) and DEL Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP4 11.1.230.5.6.13.3.1.6
Forwarding Idle Timer (p4) This parameter indicates to the PAD whether data forwarding is to be based on timeouts. If so,then the value of the parameter specifies the time limit imposed on the buffering of data characters. Each received data character will reset the timer until eventually a pause in the character stream will allow the timer to expire and all buffered data will be forwarded. (0) = No timer (1-255) = Indicates the value of the delay in twentieths of a second. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP5 11.1.230.5.6.13.3.1.7
Device Flow Control (p5) This parameter indicates whether the terminal will respond to flow control. If so,then this will allow the PAD to stop (by sending an XOFF character) and start (by sending an XON character) transmission from the terminal so that the PAD can pace the terminal. Flow control using modem signals is not supported. (0) = No auxiliary device control (1) = xon/xoff flow control (data transfer) Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP6 11.1.230.5.6.13.3.1.8
Service Signal Control (p6) This parameter indicates to the PAD whether or not network generated messages are to be transmitted to the terminal. (0) = No messages sent (1) = Send service messages (4) = Send prompts only Default value is 5.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP7 11.1.230.5.6.13.3.1.9
Device BREAK Action (p7) This parameter is used to indicate how the PAD should process a BREAK signal that is received from the terminal while the terminal is in data transfer state. (0) = Nothing (1) = Send interrupt (2) = Send reset (8) = Escape from data state (21) = Discard output,send interrupt and indication of break Default value is 21.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP8 11.1.230.5.6.13.3.1.10
Output Discard (p8) This parameter is used in conjunction with Parameter 7. Depending upon the BREAK procedure selected,this parameter may be set by the PAD when the terminal user requests that terminal data be discarded. This parameter must then be reset by the destination to allow normal delivery. The PAD will discard all packets destined for the terminal from the time the PAD sets this parameter (ie. BREAK) and the time the parameter is reset by the destination. This feature can be used,for example,to allow users to terminate lengthy outputs to terminals by pressing BREAK. (0) = Normal delivery (1) = Discard output Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP9 11.1.230.5.6.13.3.1.11
Carriage Return Padding (p9) This parameter specifies the number of padding characters to be inserted by the PAD following a carriage return transmitted to the terminal. This would allow mechanical actions (such as type-ball returns) to be completed before more data is to be output. (0) = No padding (1-255) = Number of pads to be inserted Default value is 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP10 11.1.230.5.6.13.3.1.12
Line Length (p10) This parameter indicates the maximum number of printable characters that can be displayed on the terminal before the PAD must be sent a format effector (ie. CR LF). This causes data to be output on the next line on the terminal. (0) = No line folding (1-255) = Number of characters per line Default value is 80.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP11 11.1.230.5.6.13.3.1.13
Transmission Speed (Read Only) (p11) This parameter is set by the PAD as the result of transmission speed detection if the terminal access is an autobaud port. When a port with fixed speed is used,this parameter is set during PAD configuration,based on the pre-configured value. (0) = 110 bps (1) = 134.5 bps (2) = 300 bps (3) = 1200 bps (4) = 600 bps (5) = 75 bps (6) = 150 bps (7) = 1800 bps (8) = 200 bps (9) = 100 bps (10) = 50 bps (11) = 75/1200 (12) = 2400 (13) = 4800 (14) = 9600
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP12 11.1.230.5.6.13.3.1.14
PAD Flow Control (p12) This parameter enables the terminal to indicate to the PAD that the terminal cannot receive any more data. When this parameter is set to 1,the terminal user can request that the PAD stop sending data by transmitting a DC3 character. The PAD then suspends transmission of data until a DC1 character is received. This feature allows a display terminal user to indicate when the PAD should suspend the scrolling of terminal output,so that it can be viewed. Then the output can be restarted. (0) = No flow control (1) = Flow control Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP13 11.1.230.5.6.13.3.1.15
Line Feed Insertion (p13) This parameter specifies when the PAD should insert Linefeed upon receipt of carriage return from the terminal or destination. As the parameter value is bit-encoded,any combination is permissible. (0) = No linefeed insertion (1) = Insert after carriage return to terminal (2) = Insert in data stream after carriage return from terminal (4) = Insert linefeed after echo of carriage return to terminal Default value is 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP14 11.1.230.5.6.13.3.1.16
Line Feed Padding (p14) This parameter provides for the automatic insertion by the PAD of padding characters or time delays after occurrence of a linefeed character. (0) = No padding (1-255) = Padding after linefeed Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP15 11.1.230.5.6.13.3.1.17
Editing Enable/Disable (p15) This parameter sets character delete,line delete,and line display actions in the data transfer state. Editing is always available in the command state. (0) = No editing (1) = Editing enabled (data state) Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP16 11.1.230.5.6.13.3.1.18
Character Delete Character (p16) This parameter specifies the ASCII character to be used as a 'character delete' character for local editing by the PAD. (0) = No delete character Default value is 8.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP17 11.1.230.5.6.13.3.1.19
Line Delete Character (p17) This parameter specifies the ASCII character to be used as a 'line delete' character for local editing by the PAD. (0) = No line delete Default value is 24.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP18 11.1.230.5.6.13.3.1.20
Line Display Character (p18) This parameter specifies the ASCII character to be used as a 'line redisplay' character for local editing by the PAD. (0) = No line redisplay. Default value is 18.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP19 11.1.230.5.6.13.3.1.21
Service Signal Editing (p19) (0) = None (1) = Printing terminal edit (2) = CRT terminal editing Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP20 11.1.230.5.6.13.3.1.22
Echo Mask (p20) This parameter specifies which characters are not echoed to the device (when p2 is set to 1). (0) = No mask (echo all) (1) = No echo CR (2) = No echo LF (4) = No echo VT,HT,FF (8) = No echo BEL,BS (16) = No echo ESC,ENQ (32) = No echo ACK,NAK,STX,SOH,EOT,ETX,ETB (64) = No echo of parameters 16,17,18 (128) = No echo of control characters not named above Default value is 6.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP21 11.1.230.5.6.13.3.1.23
Parity Treatment (p21) This parameter specifies whether or not the PAD should detect,check and generate parity. (0) = No parity detection or generation (1) = Parity checking and PAD handles any parity errors (2) = Parity generation,PAD sets the parity bit for each ASCII character. Default value is 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP22 11.1.230.5.6.13.3.1.24
Page Wait (p22) This parameter specifies the number of lines (line-feeds) that will be sent to the attached device before output is halted. Output is subsequently resumed after an XON character or any packetizing character is received from the device. (0) = No page wait enabled (1-255) = Number of lines output before page wait condition Default value is 23.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP23 11.1.230.5.6.13.3.1.25
First Extra Forwarding Character (p23) This parameter allow the definition of an additional data forwarding signal. This signal is in addition to those specified by parameters 3 and 4. (0) = No extra character (1-127) = ASCII code of character Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP24 11.1.230.5.6.13.3.1.26
Second Extra Forwarding Character (p24) This parameter allows the definition of an additional data forwarding signal. This signal is in addition to those characters specified by parameter 3 and 4. (0) = No extra character (1-127) = ASCII code of character Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP25 11.1.230.5.6.13.3.1.27
Output Pending Timer (p25) This parameter specifies the length of time,if any,that terminal output will be blocked by terminal input. (0) = No output pending timer. That is,output is not blocked by input (such as in half-duplex transmission). (1-255) = Delay in seconds Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP26 11.1.230.5.6.13.3.1.28
Interval Timer (p26) Maximum time,in 1/20 seconds,between transmission of packets. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP27 11.1.230.5.6.13.3.1.29
Horizontal Tab Padding (p27) Number of nulls to output after a TAB. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP28 11.1.230.5.6.13.3.1.30
XON Character to PAD (p28) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP29 11.1.230.5.6.13.3.1.31
XOFF Character to PAD (p29) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP30 11.1.230.5.6.13.3.1.32
XON Character to Device (p30) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP31 11.1.230.5.6.13.3.1.33
XOFF Character to Device (p31) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP32 11.1.230.5.6.13.3.1.34
Packet Forward on Character Count (p32) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP33 11.1.230.5.6.13.3.1.35
CONSAT parameter 101 (TAB echo) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP34 11.1.230.5.6.13.3.1.36
CONSAT parameter 102 (TAB expansion) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofP35 11.1.230.5.6.13.3.1.37
CONSAT parameter 103 (BREAK key) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvItiprofStatus 11.1.230.5.6.13.3.1.38
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvItirpoa 11.1.230.5.6.14
OBJECT IDENTIFIER    

nvItirpoaMaxRec 11.1.230.5.6.14.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItirpoaNumRec 11.1.230.5.6.14.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItirpoaTable 11.1.230.5.6.14.3
itirpoa file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvItirpoaEntry

nvItirpoaEntry 11.1.230.5.6.14.3.1
itirpoa record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvItirpoaEntry  

nvItirpoaIndex 11.1.230.5.6.14.3.1.1
Index of itirpoa record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItirpoaCode 11.1.230.5.6.14.3.1.2
RPOA Code (code)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvItirpoaCarrier 11.1.230.5.6.14.3.1.3
RPOA Name (carrier)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItirpoaStatus 11.1.230.5.6.14.3.1.4
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvItiuser 11.1.230.5.6.15
OBJECT IDENTIFIER    

nvItiuserMaxRec 11.1.230.5.6.15.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiuserNumRec 11.1.230.5.6.15.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiuserTable 11.1.230.5.6.15.3
itiprof file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvItiuserEntry

nvItiuserEntry 11.1.230.5.6.15.3.1
itiuser record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvItiuserEntry  

nvItiuserIndex 11.1.230.5.6.15.3.1.1
Index of itiuser record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvItiuserUsername 11.1.230.5.6.15.3.1.2
User Name (username)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItiuserCallback 11.1.230.5.6.15.3.1.3
User Callback Number Id (callback) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvItiuserClrestrct 11.1.230.5.6.15.3.1.4
Class Restriction (clrestrct) Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ignore(2), select(3), restrict(4)  

nvItiuserInitcmd 11.1.230.5.6.15.3.1.5
Initial Automatic Command Id (initcmd) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvItiuserUserclass 11.1.230.5.6.15.3.1.6
Class Assignment (userclass)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItiuserUserpaswd 11.1.230.5.6.15.3.1.7
User Password (userpaswd)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvItiuserStatus 11.1.230.5.6.15.3.1.8
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvItiuserNumber 11.1.230.5.6.15.3.1.9
Call back number
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvDuiconf 11.1.230.5.6.17
OBJECT IDENTIFIER    

nvDuiconfMaxRec 11.1.230.5.6.17.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDuiconfNumRec 11.1.230.5.6.17.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDuiconfTable 11.1.230.5.6.17.3
duiconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDuiconfEntry

nvDuiconfEntry 11.1.230.5.6.17.3.1
duiconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDuiconfEntry  

nvDuiconfIndex 11.1.230.5.6.17.3.1.1
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDuiconfType 11.1.230.5.6.17.3.1.2
Type of DUI Circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), alternate(2)  

nvDuiconfNua 11.1.230.5.6.17.3.1.3
X.121 address of DUI host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvDuiconfCalling 11.1.230.5.6.17.3.1.4
calling address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvDuiconfFirsttry 11.1.230.5.6.17.3.1.5
num seconds til first try.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvDuiconfRetrytime 11.1.230.5.6.17.3.1.6
num seconds for retry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvDuiconfRetryinc 11.1.230.5.6.17.3.1.7
retry time increment (in seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvDuiconfStatus 11.1.230.5.6.17.3.1.9
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvDlspcconf 11.1.230.5.6.18
OBJECT IDENTIFIER    

nvDlspcconfMaxRec 11.1.230.5.6.18.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlspcconfNumRec 11.1.230.5.6.18.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlspcconfTable 11.1.230.5.6.18.3
dlspcconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDlspcconfEntry

nvDlspcconfEntry 11.1.230.5.6.18.3.1
dlspcconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDlspcconfEntry  

nvDlspcconfIndex 11.1.230.5.6.18.3.1.1
Dlspcconf file record number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlspcconfNodename 11.1.230.5.6.18.3.1.2
name of node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvDlspcconfSitename 11.1.230.5.6.18.3.1.3
name of site.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

nvDlspcconfHelpphone 11.1.230.5.6.18.3.1.4
phone number part of help message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvDlspcconfAbortmsg 11.1.230.5.6.18.3.1.5
message if session cannot be resumed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvDlspcconfPidtable 11.1.230.5.6.18.3.1.6
to map X.3 P11 into protocol id.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvDlspcconfPortalarm 11.1.230.5.6.18.3.1.7
number of idle ports to cause alarm.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvDlspcconfStatus 11.1.230.5.6.18.3.1.8
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvDlstat 11.1.230.5.7.1
OBJECT IDENTIFIER    

nvDlstatMaxRec 11.1.230.5.7.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlstatNumRec 11.1.230.5.7.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlstatTable 11.1.230.5.7.1.3
dlstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDlstatEntry

nvDlstatEntry 11.1.230.5.7.1.3.1
dlstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDlstatEntry  

nvDlstatIndex 11.1.230.5.7.1.3.1.1
Index of dlstat
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlstatLinkname 11.1.230.5.7.1.3.1.2
name of link being used Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nolink(1), link1(2), link2(3), link3(4), link4(5), link5(6), link6(7), link7(8), link8(9), link9(10), link10(11), link11(12), link12(13), link13(14), link14(15), link15(16), link16(17), link17(18), link18(19), link19(20), link20(21), link21(22), link22(23), link23(24), link24(25), link25(26), link26(27), link27(28), link28(29), link29(30), link30(31), link31(32), link32(33), link33(34), link34(35), link35(36), link36(37), link37(38), link38(39), link39(40), link40(41), link41(42), link42(43), link43(44), link44(45), link45(46), link46(47), link47(48), link48(49), link49(50), link50(51), link51(52), link52(53), link53(54), link54(55), link55(56), link56(57), link57(58), link58(59), link59(60), link60(61), link61(62), link62(63), link63(64), link64(65), link65(66), link66(67), link67(68), link68(69), link69(70), link70(71), link71(72), link72(73), link73(74), link74(75), link75(76), link76(77), link77(78), link78(79), link79(80), link80(81), link81(82), link82(83), link83(84), link84(85), link85(86), link86(87), link87(88), link88(89), link89(90), link90(91), link91(92), link92(93), link93(94), link94(95), link95(96), link96(97), link97(98), link98(99), link99(100), link100(101), link101(102), link102(103), link103(104), link104(105), link105(106), link106(107), link107(108), link108(109), link109(110), link110(111), link111(112), link112(113), link113(114), link114(115), link115(116), link116(117), link117(118), link118(119), link119(120), link120(121), link121(122), link122(123), link123(124), link124(125), link125(126), link126(127), link127(128), link128(129), link129(130), link130(131), link131(132), link132(133), link133(134), link134(135), link135(136), link136(137), link137(138), link138(139), link139(140), link140(141), link141(142), link142(143), link143(144), link144(145), link145(146), link146(147), link147(148), link148(149), link149(150), link150(151), link151(152), link152(153), link153(154), link154(155), link155(156), link156(157), link157(158), link158(159), link159(160), link160(161), link161(162), link162(163), link163(164), link164(165), link165(166), link166(167), link167(168), link168(169), link169(170), link170(171), link171(172), link172(173), link173(174), link174(175), link175(176), link176(177), link177(178), link178(179), link179(180), link180(181), link181(182), link182(183), link183(184), link184(185), link185(186), link186(187), link187(188), link188(189), link189(190), link190(191), link191(192), link192(193), link193(194), link194(195), link195(196), link196(197), link197(198), link198(199), link199(200), link200(201), link201(202), link202(203), link203(204), link204(205), link205(206), link206(207), link207(208), link208(209), link209(210), link210(211), link211(212), link212(213), link213(214), link214(215), link215(216), link216(217), link217(218), link218(219), link219(220), link220(221), link221(222), link222(223), link223(224), link224(225), link225(226), link226(227), link227(228), link228(229), link229(230), link230(231), link231(232), link232(233), link233(234), link234(235), link235(236), link236(237), link237(238), link238(239), link239(240), link240(241), link241(242), link242(243), link243(244), link244(245), link245(246), link246(247), link247(248), link248(249), link249(250), link250(251), link251(252), link252(253), link253(254), link254(255), link255(256), link256(257), link257(258), link258(259), link259(260), link260(261), link261(262), link262(263), link263(264), link264(265), link265(266), link266(267), link267(268), link268(269), link269(270), link270(271), link271(272), link272(273), link273(274), link274(275), link275(276), link276(277), link277(278), link278(279), link279(280), link280(281), link281(282), link282(283), link283(284), link284(285), link285(286), link286(287), link287(288), link288(289), link289(290), link290(291), link291(292), link292(293), link293(294), link294(295), link295(296), link296(297), link297(298), link298(299), link299(300), link300(301), link301(302), link302(303), link303(304), link304(305), link305(306), link306(307), link307(308), link308(309), link309(310), link310(311), link311(312), link312(313), link313(314), link314(315), link315(316), link316(317), link317(318), link318(319), link319(320), link320(321), link321(322), link322(323), link323(324), link324(325), link325(326), link326(327), link327(328), link328(329), link329(330), link330(331), link331(332), link332(333), link333(334), link334(335), link335(336), link336(337), link337(338), link338(339), link339(340), link340(341), link341(342), link342(343), link343(344), link344(345), link345(346), link346(347), link347(348), link348(349), link349(350), link350(351), link351(352), link352(353), link353(354), link354(355), link355(356), link356(357), link357(358), link358(359), link359(360), link360(361), link361(362), link362(363), link363(364), link364(365), link365(366), link366(367), link367(368), link368(369), link369(370), link370(371), link371(372), link372(373), link373(374), link374(375), link375(376), link376(377), link377(378), link378(379), link379(380), link380(381), link381(382), link382(383), link383(384), link384(385), link385(386), link386(387), link387(388), link388(389), link389(390), link390(391), link391(392), link392(393), link393(394), link394(395), link395(396), link396(397), link397(398), link398(399), link399(400), link400(401), link401(402), link402(403), link403(404), link404(405), link405(406), link406(407), link407(408), link408(409), link409(410), link410(411), link411(412), link412(413), link413(414), link414(415), link415(416), link416(417), link417(418), link418(419), link419(420), link420(421), link421(422), link422(423), link423(424), link424(425), link425(426), link426(427), link427(428), link428(429)  

nvDlstatApp 11.1.230.5.7.1.3.1.3
link appearence Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dte(1), dce(2), primarySdlcStation(3), secondarySdlcStation(4), idle(5)  

nvDlstatLfrmr 11.1.230.5.7.1.3.1.4
reason code from last FRMR received Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), badNR(17), overrun(33), undefinedControlField(122), badSUFrame(193)  

nvDlstatLreset 11.1.230.5.7.1.3.1.5
reason for last link reset Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), badCommandFrame(2), badResponseFrame(4), receiverOverrun(5), badNR(9), networkDisconnect(10), driverDisconnect(11), unsolicitedFinal(12), frmr(13), unexpectedUA(14), remoteTimeout(15), sabm(16), sarm(17), disc(18), dm(19), snrm(20)  

nvDlstatMstate 11.1.230.5.7.1.3.1.6
main state of link Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), down(2), startingDriver(3), discSent(4), sabmSent(5), sarmSetup(6), frmrSent(7), sabmReset(8), up(9), clearing(10), dm(11), nu(12), sabmAwaitingRrAFterCr(13), badCmdAwaitingRrToSendFrmr(14), frmrAwaitingRrToEnterRs(15), discAwaitingRrToEnterSs(16), awaitingIdleDriverToSendDn(17), awaitingIdleDriverToResend(18), waitingToSendDisc(19), waitingToSendSnrm(20), disconnectMode(21), waitingToSendXid(22), sentXid(23), multipleSnrm(24)  

nvDlstatProtocol 11.1.230.5.7.1.3.1.7
link procedure selected Initial status is 3+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unconfigured(1), lap(2), lapb(4), lapbExtended(8), austrianPTT(12), pss(16), sdlc(17), sdlcExtended(49)  

nvDlstatPstate 11.1.230.5.7.1.3.1.8
a. primary UP state Initial status is 1+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), down(2), normalReceiveMode(3), remoteBusy(4), remoteTimedOut(5)  

nvDlstatSstate 11.1.230.5.7.1.3.1.9
Secondary UP state . Initial status is 1+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), down(2), normalTransmit(3), localBusy(4), rejectFrameSent(5)  

nvDlstatAbtfrxs 11.1.230.5.7.1.3.1.10
a. Number of aborted frames received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatAlarms 11.1.230.5.7.1.3.1.11
Number of alarms. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatFrmrrxs 11.1.230.5.7.1.3.1.12
a. Number of frame-reject frames received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatFrmrtxs 11.1.230.5.7.1.3.1.13
Number of frame-reject frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatIfrxs 11.1.230.5.7.1.3.1.14
Number of I-frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatIftxs 11.1.230.5.7.1.3.1.15
Number of I-frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatRejrxs 11.1.230.5.7.1.3.1.16
Number of REJ-frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatRejtxs 11.1.230.5.7.1.3.1.17
Number of REJ-frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatRnrrxs 11.1.230.5.7.1.3.1.18
Number of RNR-frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatRnrtxs 11.1.230.5.7.1.3.1.19
Number of RNR-frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatRrrxs 11.1.230.5.7.1.3.1.20
Number of RR-frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatRrtxs 11.1.230.5.7.1.3.1.21
Number of RR-frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatRxdds 11.1.230.5.7.1.3.1.22
Number of receive device-driver errors. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatTouts 11.1.230.5.7.1.3.1.23
Number of link resets due to remote timeouts. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatTretrys 11.1.230.5.7.1.3.1.24
Number of retries due to remote timeouts. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlstatDtreset 11.1.230.5.7.1.3.1.25
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvLinkstat 11.1.230.5.7.2
OBJECT IDENTIFIER    

nvLinkstatMaxRec 11.1.230.5.7.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLinkstatNumRec 11.1.230.5.7.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLinkstatTable 11.1.230.5.7.2.3
linkstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvLinkstatEntry

nvLinkstatEntry 11.1.230.5.7.2.3.1
linkstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvLinkstatEntry  

nvLinkstatIndex 11.1.230.5.7.2.3.1.1
Index of linkstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLinkstatPort 11.1.230.5.7.2.3.1.2
name of port being used Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..11)  

nvLinkstatApp 11.1.230.5.7.2.3.1.3
link appearence Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dte(1), dce(2), primarySDLCStation(3), secondarySDLCStation(4), idle(5)  

nvLinkstatFstate 11.1.230.5.7.2.3.1.4
main state of FLTE FSM Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), down(2), startingDriver(3), up(4)  

nvLinkstatLfrmr 11.1.230.5.7.2.3.1.5
reason code from last FRMR received Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), badNR(17), overrun(33), undefinedControlField(129), badSUFrame(193)  

nvLinkstatLreset 11.1.230.5.7.2.3.1.6
reason for last link reset Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), illegalCommand(2), illegalResponse(4), receiverOverrun(5), illegalNr(9), networkDisconnect(10), driverDisconnect(11), unsolicitedFinal(12), frmrOrCmdr(13), unexpectedUa(14), remoteTimedOut(15), sabm(16), sarm(17), disconnect(18), dm(19), snrm(20)  

nvLinkstatN1 11.1.230.5.7.2.3.1.7
actual n1 used (in bits) Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLinkstatProtocol 11.1.230.5.7.2.3.1.8
link procedure selected Initial status is 3+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unconfigured(1), lap(2), lapb(4), lapbExtended(8), austrianPTT(12), pss(16), sdlc(17), sdlcExtended(49)  

nvLinkstatAbtfrxs 11.1.230.5.7.2.3.1.9
Number of aborted frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatAlarms 11.1.230.5.7.2.3.1.10
Number of alarms. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatFrmrrxs 11.1.230.5.7.2.3.1.11
Number of frame-reject frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatFrmrtxs 11.1.230.5.7.2.3.1.12
Number of frame-reject frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatIfrxs 11.1.230.5.7.2.3.1.13
Number of I-frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatIftxs 11.1.230.5.7.2.3.1.14
Number of I-frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatRejrxs 11.1.230.5.7.2.3.1.15
Number of REJ-frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatRejtxs 11.1.230.5.7.2.3.1.16
Number of REJ-frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatRnrrxs 11.1.230.5.7.2.3.1.17
Number of RNR-frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatRnrtxs 11.1.230.5.7.2.3.1.18
Number of RNR-frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatRrrxs 11.1.230.5.7.2.3.1.19
Number of RR-frames received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatRrtxs 11.1.230.5.7.2.3.1.20
Number of RR-frames transmitted. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatRxdds 11.1.230.5.7.2.3.1.21
Number of receive device-driver errors. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatTouts 11.1.230.5.7.2.3.1.22
Number of link resets due to remote timeouts. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatTretrys 11.1.230.5.7.2.3.1.23
Number of retries due to remote timeouts. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatTchartxs 11.1.230.5.7.2.3.1.24
Number of characters sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatTcharrxs 11.1.230.5.7.2.3.1.25
Number of characters received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvLinkstatDtreset 11.1.230.5.7.2.3.1.26
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvLinkstatNlinkup 11.1.230.5.7.2.3.1.27
Number of times link came up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvDlconf 11.1.230.5.7.3
OBJECT IDENTIFIER    

nvDlconfMaxRec 11.1.230.5.7.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlconfNumRec 11.1.230.5.7.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvDlconfTable 11.1.230.5.7.3.3
dlconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvDlconfEntry

nvDlconfEntry 11.1.230.5.7.3.3.1
dlconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvDlconfEntry  

nvDlconfDlnumber 11.1.230.5.7.3.3.1.2
Data Link Record (dlnumber) Number of the DL,ie,record id# in DLCONF file. Parameter is set during factory configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..428  

nvDlconfLinkname 11.1.230.5.7.3.3.1.3
Link Name (linkname)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nolink(1), link1(2), link2(3), link3(4), link4(5), link5(6), link6(7), link7(8), link8(9), link9(10), link10(11), link11(12), link12(13), link13(14), link14(15), link15(16), link16(17), link17(18), link18(19), link19(20), link20(21), link21(22), link22(23), link23(24), link24(25), link25(26), link26(27), link27(28), link28(29), link29(30), link30(31), link31(32), link32(33), link33(34), link34(35), link35(36), link36(37), link37(38), link38(39), link39(40), link40(41), link41(42), link42(43), link43(44), link44(45), link45(46), link46(47), link47(48), link48(49), link49(50), link50(51), link51(52), link52(53), link53(54), link54(55), link55(56), link56(57), link57(58), link58(59), link59(60), link60(61), link61(62), link62(63), link63(64), link64(65), link65(66), link66(67), link67(68), link68(69), link69(70), link70(71), link71(72), link72(73), link73(74), link74(75), link75(76), link76(77), link77(78), link78(79), link79(80), link80(81), link81(82), link82(83), link83(84), link84(85), link85(86), link86(87), link87(88), link88(89), link89(90), link90(91), link91(92), link92(93), link93(94), link94(95), link95(96), link96(97), link97(98), link98(99), link99(100), link100(101), link101(102), link102(103), link103(104), link104(105), link105(106), link106(107), link107(108), link108(109), link109(110), link110(111), link111(112), link112(113), link113(114), link114(115), link115(116), link116(117), link117(118), link118(119), link119(120), link120(121), link121(122), link122(123), link123(124), link124(125), link125(126), link126(127), link127(128), link128(129), link129(130), link130(131), link131(132), link132(133), link133(134), link134(135), link135(136), link136(137), link137(138), link138(139), link139(140), link140(141), link141(142), link142(143), link143(144), link144(145), link145(146), link146(147), link147(148), link148(149), link149(150), link150(151), link151(152), link152(153), link153(154), link154(155), link155(156), link156(157), link157(158), link158(159), link159(160), link160(161), link161(162), link162(163), link163(164), link164(165), link165(166), link166(167), link167(168), link168(169), link169(170), link170(171), link171(172), link172(173), link173(174), link174(175), link175(176), link176(177), link177(178), link178(179), link179(180), link180(181), link181(182), link182(183), link183(184), link184(185), link185(186), link186(187), link187(188), link188(189), link189(190), link190(191), link191(192), link192(193), link193(194), link194(195), link195(196), link196(197), link197(198), link198(199), link199(200), link200(201), link201(202), link202(203), link203(204), link204(205), link205(206), link206(207), link207(208), link208(209), link209(210), link210(211), link211(212), link212(213), link213(214), link214(215), link215(216), link216(217), link217(218), link218(219), link219(220), link220(221), link221(222), link222(223), link223(224), link224(225), link225(226), link226(227), link227(228), link228(229), link229(230), link230(231), link231(232), link232(233), link233(234), link234(235), link235(236), link236(237), link237(238), link238(239), link239(240), link240(241), link241(242), link242(243), link243(244), link244(245), link245(246), link246(247), link247(248), link248(249), link249(250), link250(251), link251(252), link252(253), link253(254), link254(255), link255(256), link256(257), link257(258), link258(259), link259(260), link260(261), link261(262), link262(263), link263(264), link264(265), link265(266), link266(267), link267(268), link268(269), link269(270), link270(271), link271(272), link272(273), link273(274), link274(275), link275(276), link276(277), link277(278), link278(279), link279(280), link280(281), link281(282), link282(283), link283(284), link284(285), link285(286), link286(287), link287(288), link288(289), link289(290), link290(291), link291(292), link292(293), link293(294), link294(295), link295(296), link296(297), link297(298), link298(299), link299(300), link300(301), link301(302), link302(303), link303(304), link304(305), link305(306), link306(307), link307(308), link308(309), link309(310), link310(311), link311(312), link312(313), link313(314), link314(315), link315(316), link316(317), link317(318), link318(319), link319(320), link320(321), link321(322), link322(323), link323(324), link324(325), link325(326), link326(327), link327(328), link328(329), link329(330), link330(331), link331(332), link332(333), link333(334), link334(335), link335(336), link336(337), link337(338), link338(339), link339(340), link340(341), link341(342), link342(343), link343(344), link344(345), link345(346), link346(347), link347(348), link348(349), link349(350), link350(351), link351(352), link352(353), link353(354), link354(355), link355(356), link356(357), link357(358), link358(359), link359(360), link360(361), link361(362), link362(363), link363(364), link364(365), link365(366), link366(367), link367(368), link368(369), link369(370), link370(371), link371(372), link372(373), link373(374), link374(375), link375(376), link376(377), link377(378), link378(379), link379(380), link380(381), link381(382), link382(383), link383(384), link384(385), link385(386), link386(387), link387(388), link388(389), link389(390), link390(391), link391(392), link392(393), link393(394), link394(395), link395(396), link396(397), link397(398), link398(399), link399(400), link400(401), link401(402), link402(403), link403(404), link404(405), link405(406), link406(407), link407(408), link408(409), link409(410), link410(411), link411(412), link412(413), link413(414), link414(415), link415(416), link416(417), link417(418), link418(419), link419(420), link420(421), link421(422), link422(423), link423(424), link424(425), link425(426), link426(427), link427(428), link428(429)  

nvDlconfPuaddr 11.1.230.5.7.3.3.1.4
Polling Address (puaddr) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvLinkconf 11.1.230.5.7.4
OBJECT IDENTIFIER    

nvLinkconfMaxRec 11.1.230.5.7.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLinkconfNumRec 11.1.230.5.7.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLinkconfTable 11.1.230.5.7.4.3
linkconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvLinkconfEntry

nvLinkconfEntry 11.1.230.5.7.4.3.1
linkconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvLinkconfEntry  

nvLinkconfIndex 11.1.230.5.7.4.3.1.1
Index of linkconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLinkconfLinkname 11.1.230.5.7.4.3.1.2
Link Name (linkname) Link name and number (ie,'Link1') Parameter is set during factory configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nolink(1), link1(2), link2(3), link3(4), link4(5), link5(6), link6(7), link7(8), link8(9), link9(10), link10(11), link11(12), link12(13), link13(14), link14(15), link15(16), link16(17), link17(18), link18(19), link19(20), link20(21), link21(22), link22(23), link23(24), link24(25), link25(26), link26(27), link27(28), link28(29), link29(30), link30(31), link31(32), link32(33), link33(34), link34(35), link35(36), link36(37), link37(38), link38(39), link39(40), link40(41), link41(42), link42(43), link43(44), link44(45), link45(46), link46(47), link47(48), link48(49), link49(50), link50(51), link51(52), link52(53), link53(54), link54(55), link55(56), link56(57), link57(58), link58(59), link59(60), link60(61), link61(62), link62(63), link63(64), link64(65), link65(66), link66(67), link67(68), link68(69), link69(70), link70(71), link71(72), link72(73), link73(74), link74(75), link75(76), link76(77), link77(78), link78(79), link79(80), link80(81), link81(82), link82(83), link83(84), link84(85), link85(86), link86(87), link87(88), link88(89), link89(90), link90(91), link91(92), link92(93), link93(94), link94(95), link95(96), link96(97), link97(98), link98(99), link99(100), link100(101), link101(102), link102(103), link103(104), link104(105), link105(106), link106(107), link107(108), link108(109), link109(110), link110(111), link111(112), link112(113), link113(114), link114(115), link115(116), link116(117), link117(118), link118(119), link119(120), link120(121), link121(122), link122(123), link123(124), link124(125), link125(126), link126(127), link127(128), link128(129), link129(130), link130(131), link131(132), link132(133), link133(134), link134(135), link135(136), link136(137), link137(138), link138(139), link139(140), link140(141), link141(142), link142(143), link143(144), link144(145), link145(146), link146(147), link147(148), link148(149), link149(150), link150(151), link151(152), link152(153), link153(154), link154(155), link155(156), link156(157), link157(158), link158(159), link159(160), link160(161), link161(162), link162(163), link163(164), link164(165), link165(166), link166(167), link167(168), link168(169), link169(170), link170(171), link171(172), link172(173), link173(174), link174(175), link175(176), link176(177), link177(178), link178(179), link179(180), link180(181), link181(182), link182(183), link183(184), link184(185), link185(186), link186(187), link187(188), link188(189), link189(190), link190(191), link191(192), link192(193), link193(194), link194(195), link195(196), link196(197), link197(198), link198(199), link199(200), link200(201), link201(202), link202(203), link203(204), link204(205), link205(206), link206(207), link207(208), link208(209), link209(210), link210(211), link211(212), link212(213), link213(214), link214(215), link215(216), link216(217), link217(218), link218(219), link219(220), link220(221), link221(222), link222(223), link223(224), link224(225), link225(226), link226(227), link227(228), link228(229), link229(230), link230(231), link231(232), link232(233), link233(234), link234(235), link235(236), link236(237), link237(238), link238(239), link239(240), link240(241), link241(242), link242(243), link243(244), link244(245), link245(246), link246(247), link247(248), link248(249), link249(250), link250(251), link251(252), link252(253), link253(254), link254(255), link255(256), link256(257), link257(258), link258(259), link259(260), link260(261), link261(262), link262(263), link263(264), link264(265), link265(266), link266(267), link267(268), link268(269), link269(270), link270(271), link271(272), link272(273), link273(274), link274(275), link275(276), link276(277), link277(278), link278(279), link279(280), link280(281), link281(282), link282(283), link283(284), link284(285), link285(286), link286(287), link287(288), link288(289), link289(290), link290(291), link291(292), link292(293), link293(294), link294(295), link295(296), link296(297), link297(298), link298(299), link299(300), link300(301), link301(302), link302(303), link303(304), link304(305), link305(306), link306(307), link307(308), link308(309), link309(310), link310(311), link311(312), link312(313), link313(314), link314(315), link315(316), link316(317), link317(318), link318(319), link319(320), link320(321), link321(322), link322(323), link323(324), link324(325), link325(326), link326(327), link327(328), link328(329), link329(330), link330(331), link331(332), link332(333), link333(334), link334(335), link335(336), link336(337), link337(338), link338(339), link339(340), link340(341), link341(342), link342(343), link343(344), link344(345), link345(346), link346(347), link347(348), link348(349), link349(350), link350(351), link351(352), link352(353), link353(354), link354(355), link355(356), link356(357), link357(358), link358(359), link359(360), link360(361), link361(362), link362(363), link363(364), link364(365), link365(366), link366(367), link367(368), link368(369), link369(370), link370(371), link371(372), link372(373), link373(374), link374(375), link375(376), link376(377), link377(378), link378(379), link379(380), link380(381), link381(382), link382(383), link383(384), link384(385), link385(386), link386(387), link387(388), link388(389), link389(390), link390(391), link391(392), link392(393), link393(394), link394(395), link395(396), link396(397), link397(398), link398(399), link399(400), link400(401), link401(402), link402(403), link403(404), link404(405), link405(406), link406(407), link407(408), link408(409), link409(410), link410(411), link411(412), link412(413), link413(414), link414(415), link415(416), link416(417), link417(418), link418(419), link419(420), link420(421), link421(422), link422(423), link423(424), link424(425), link425(426), link426(427), link427(428), link428(429)  

nvLinkconfPortname 11.1.230.5.7.4.3.1.3
Port to serve this link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvLinkconfRsrcpool 11.1.230.5.7.4.3.1.4
Resource Pool Name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvLinkconfProtocol 11.1.230.5.7.4.3.1.5
Link-Level Protocol (protocol) This field defines the Synchronous Link link procedure that is to be followed. Default value is 3+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lap(2), lapb(4), lapbe(8), aust(12), pss(16), sdlc(17), sdlce(49)  

nvLinkconfWsze 11.1.230.5.7.4.3.1.6
Link-Level Window Size (wsze) Option to select window size to be used. Between 1 and 7 for modulo 8. Between 1 and 127 for modulo 127. Default value is 7.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

nvLinkconfHostinact 11.1.230.5.7.4.3.1.9
SDLC Host Inactivity Timer (hostinact) SDLC secondary station maximum wait without host contact. Default value is 600.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3600  

nvLinkconfN2 11.1.230.5.7.4.3.1.11
Number of Retransmissions (n2) Maximum number of times a data frame will be retransmitted, before resetting the link. Default value is 10.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvLinkconfPollthres 11.1.230.5.7.4.3.1.12
SDLC Poll Threshold (pollthres) Default value is 20.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

nvLinkconfT1 11.1.230.5.7.4.3.1.13
Timer Recovery Timer (t1) Timer for maximum wait for acknowledgment. When timer expires, timeout recovery is attempted. Default value is 5.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..300  

nvLinkconfT2 11.1.230.5.7.4.3.1.14
Acknowledgement Timer (t2) LAPB maximum amount of time before acknowledgement. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..300  

nvLinkconfT3 11.1.230.5.7.4.3.1.15
Link Watchdog Timer (t3) LAPB maximum amount of link idle time before a probe is done. Default value is 15.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..300  

nvLinkconfAckthresh 11.1.230.5.7.4.3.1.16
Acknowledgement Threshold (ackthresh)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvLinkconfDialout 11.1.230.5.7.4.3.1.18
dialout command string id
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvLinkconfWaitframe 11.1.230.5.7.4.3.1.19
Number of T1 periods to wait for frame upon startup.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvX25stat 11.1.230.5.10.1
OBJECT IDENTIFIER    

nvX25statMaxRec 11.1.230.5.10.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25statNumRec 11.1.230.5.10.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25statTable 11.1.230.5.10.1.3
x25stat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvX25statEntry

nvX25statEntry 11.1.230.5.10.1.3.1
x25stat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvX25statEntry  

nvX25statIndex 11.1.230.5.10.1.3.1.1
Index of x25stat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25statNetname 11.1.230.5.10.1.3.1.2
x25stat: network interface name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvX25statCode 11.1.230.5.10.1.3.1.3
last clear or reset code. Initial status is 1+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dteOriginated(2), numberBusy(3), outOfOrder(4), remoteDteOperational(5), remoteProcedureError(6), localProcedureError(7), reverseChargeNotSubscribed(8), incompatibleDestination(9), fastSelectNotSubscribed(10), invalidFacilityRequest(11), accessBarred(12), networkCongestion(13), networkOperational(14), notObtainable(15), rpoaOutOfOrder(16), shipAbsent(17), networkOutOfOrder(18)  

nvX25statDiag 11.1.230.5.10.1.3.1.4
last diagnostic code. Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25statIfstate 11.1.230.5.10.1.3.1.5
network state. Current state of network interface. Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER r1Down(1), r2Startup(2), r3Restart(3), r4Up(4), r5Disconnected(5)  

nvX25statCallcur 11.1.230.5.10.1.3.1.6
Number of X25 calls currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25statOpen 11.1.230.5.10.1.3.1.7
network open? Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25statUp 11.1.230.5.10.1.3.1.8
network up? Initial status is 0+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25statNtxcalls 11.1.230.5.10.1.3.1.9
number of call requests sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxcalls 11.1.230.5.10.1.3.1.10
number of call requests received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxcallcs 11.1.230.5.10.1.3.1.11
number of call confs sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxcallcs 11.1.230.5.10.1.3.1.12
number of call confs received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxclrs 11.1.230.5.10.1.3.1.13
number of clear requests sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxclrs 11.1.230.5.10.1.3.1.14
number of clear requests received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxclrcs 11.1.230.5.10.1.3.1.15
number of clear confs sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxclrcs 11.1.230.5.10.1.3.1.16
number of clear confs received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxres 11.1.230.5.10.1.3.1.17
number of reset requests send. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxres 11.1.230.5.10.1.3.1.18
number of reset requests received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxints 11.1.230.5.10.1.3.1.19
number of int requests send. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxints 11.1.230.5.10.1.3.1.20
number of int requests received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxrrs 11.1.230.5.10.1.3.1.21
number of receiver readys send. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxrrs 11.1.230.5.10.1.3.1.22
number of receiver readys received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxrnrs 11.1.230.5.10.1.3.1.23
number of receiver not readys send. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxrnrs 11.1.230.5.10.1.3.1.24
number of receiver not readys received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxpaks 11.1.230.5.10.1.3.1.25
number of data packets sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxpaks 11.1.230.5.10.1.3.1.26
number of data packets received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxsegs 11.1.230.5.10.1.3.1.27
number of data segments sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxsegs 11.1.230.5.10.1.3.1.28
number of data segments received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNtxchars 11.1.230.5.10.1.3.1.29
number of data chars sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statNrxchars 11.1.230.5.10.1.3.1.30
number of data chars received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25statMaxvc 11.1.230.5.10.1.3.1.31
maximum connections. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25statDtreset 11.1.230.5.10.1.3.1.32
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvX25statLinkup 11.1.230.5.10.1.3.1.33
Link (level2) uptime in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25call 11.1.230.5.10.2
OBJECT IDENTIFIER    

nvX25callMaxRec 11.1.230.5.10.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25callNumRec 11.1.230.5.10.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25callTable 11.1.230.5.10.2.3
x25call file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvX25callEntry

nvX25callEntry 11.1.230.5.10.2.3.1
x25call record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvX25callEntry  

nvX25callIndex 11.1.230.5.10.2.3.1.1
Index of x25call record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25callNetname 11.1.230.5.10.2.3.1.2
network interface name (as defined in the X25conf record)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvX25callChanstate 11.1.230.5.10.2.3.1.3
logical channel state Initial status is p1 (0+1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER p1(1), p1r(2), p2(3), p3(4), p3r(5), d1i1(6), d1i2(7), d1i3(8), d1i4(9), d2(10), d3(11), d4(12), d5(13), d6(14), d7(15), p5C(16), p5T(17), p6(18), p6r(19), p2r(20), p7r(21)  

nvX25callChantype 11.1.230.5.10.2.3.1.4
logical channel type Initial status is 3+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incoming(2), outgoing(3), twoway(4), permanent(5)  

nvX25callCode 11.1.230.5.10.2.3.1.5
last clear or reset code Initial status is 1+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER c-dte(2), c-bsy(3), c-ooo(4), c-rdo(5), c-rpe(6), c-lpe(7), c-rns(8), c-id(9), c-fns(10), c-ifr(11), c-ab(12), c-nc(13), c-no(14), c-nob(15), c-roo(16), c-sa(17), c-noo(18)  

nvX25callDiag 11.1.230.5.10.2.3.1.6
last diagnostic code Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvX25callExpack 11.1.230.5.10.2.3.1.7
number of ACKs expected This field indicates the number of message acknowlegements that are expected from the Network User and is used for flow control within the node. Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvX25callLcn 11.1.230.5.10.2.3.1.8
logical channel number assigned to this call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

nvX25callRxpsze 11.1.230.5.10.2.3.1.9
receive packet size This field indicates the largest packet that will be received across the interface. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 7+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER b16(5), b32(6), b64(7), b128(8), b256(9), b512(10), b1024(11), b2048(12), b4096(13)  

nvX25callRxwsze 11.1.230.5.10.2.3.1.10
receive window This field indicates the packet-level receive window size being used. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

nvX25callRxtput 11.1.230.5.10.2.3.1.11
receive throughput class This field indicates the receive throughtput class that is being used. If throughput-class negotiation is in effect,this is the value that was agreed. Initial status is 7+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bps75(4), bps150(5), bps300(6), bps600(7), bps1200(8), bps2400(9), bps4800(10), bps9600(11), bps19200(12), bps48000(13)  

nvX25callNr 11.1.230.5.10.2.3.1.12
N(R) state variable This field indicates the sequence number of the next packet expected to be received on this logical channel. Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

nvX25callNrunak 11.1.230.5.10.2.3.1.13
next N(R) to acknowlege This field indicates the sequence number of the packet that will next be acknowledged as received on this channel. By delaying acknowledgements of received packets,flow control of the sender is achieved. Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

nvX25callNs 11.1.230.5.10.2.3.1.14
N(S) state variable This field indicates the sequence number of the next data packet to be sent on this logical channel. Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

nvX25callNsunak 11.1.230.5.10.2.3.1.15
N(S) to be acknowledged This field indicates the sequence number of the data packet that is to be acknowledged next by the receiver. Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

nvX25callNunakpac 11.1.230.5.10.2.3.1.16
number of unacknowledged data packets transmitted This field indicates the number of data packets that have been sent but that are not yet acknowledged by the receiver. Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvX25callTxpsze 11.1.230.5.10.2.3.1.17
transmit packet size This field indicates the largest packet that will be transmitted across the interface. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 7+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER b16(5), b32(6), b64(7), b128(8), b256(9), b512(10), b1024(11), b2048(12), b4096(13)  

nvX25callTxwsze 11.1.230.5.10.2.3.1.18
transmit window This field indicates the packet-level transmit window size being used. If flow-control negotiation is in effect,this is the value that was agreed. Initial status is 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

nvX25callTxtput 11.1.230.5.10.2.3.1.19
transmit throughput class This field indicates the transmit throughtput class that is being used. If throughput-class negotiation is in effect,this is the value that was agreed. Initial status is 7+1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bps75(4), bps150(5), bps300(6), bps600(7), bps1200(8), bps2400(9), bps4800(10), bps9600(11), bps19200(12), bps48000(13)  

nvX25callNrxints 11.1.230.5.10.2.3.1.20
number of INTERRUPTs received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNrxpaks 11.1.230.5.10.2.3.1.21
number of packets received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNrxres 11.1.230.5.10.2.3.1.22
number of RESET REQUESTs received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNrxrnrs 11.1.230.5.10.2.3.1.23
number of RNRs received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNrxrrs 11.1.230.5.10.2.3.1.24
number of RRs received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNrxsegs 11.1.230.5.10.2.3.1.25
number of segments received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNtxints 11.1.230.5.10.2.3.1.26
number of INTERRUPTs sent Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNtxpaks 11.1.230.5.10.2.3.1.27
number of packets sent Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNtxsegs 11.1.230.5.10.2.3.1.28
number of segments sent Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNtxres 11.1.230.5.10.2.3.1.29
number of RESET REQUESTs sent Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callNtxrrs 11.1.230.5.10.2.3.1.30
number of RRs sent .note RNRs are not transmitted by the X.25 interface component. .end note Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvX25callDtreset 11.1.230.5.10.2.3.1.31
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvX25conf 11.1.230.5.10.3
OBJECT IDENTIFIER    

nvX25confMaxRec 11.1.230.5.10.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25confNumRec 11.1.230.5.10.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25confTable 11.1.230.5.10.3.3
x25conf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvX25confEntry

nvX25confEntry 11.1.230.5.10.3.3.1
x25conf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvX25confEntry  

nvX25confIndex 11.1.230.5.10.3.3.1.1
Index of x25conf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25confNetname 11.1.230.5.10.3.3.1.2
Network Interface Name (netname) This field names an instance of the X.25 network interface. The name is used to identify the status records belonging to,and commands destined for,a particular instance of an X.25 network interface. Parameter is set during factory configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvX25confApp 11.1.230.5.10.3.3.1.3
Logical Interface Appearance (app) This field defines whether the component implements an X.25 interface,or an internal network trunk interface. In addition,it specifies the appearance of the interface. Default value is 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dte(2), dce(3), trunkx(17), trunky(33)  

nvX25confAutostart 11.1.230.5.10.3.3.1.4
Auto X.25 Connection Startup (autostart) Default value is enable (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2), stndby(3), v32(4), dialin(5), bidir(6)  

nvX25confDlnumber 11.1.230.5.10.3.3.1.5
Data Link Record (dlnumber) This field tells which of the DLCONF records in the SL component should be used by this net. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

nvX25confLic 11.1.230.5.10.3.3.1.6
Lowest Incoming SVC (lic) This field defines the lowest logical channel number (LCN) that is reserved for incoming calls. The range of logical channels from LIC to LIC+NIC-1 is reserved for incoming calls only. Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

nvX25confLoc 11.1.230.5.10.3.3.1.7
Lowest Outgoing SVC (loc) This field defines the lowest logical channel number (LCN) that is reserved for outgoing calls. The range of logical channels from LOC to LOC+NOC-1 is reserved for outgoing calls. Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

nvX25confLpc 11.1.230.5.10.3.3.1.8
Lowest PVC (lpc) This field describes the lowest logical channel number (LCN) in the range reserved for permanent virtual circuits (PVCs). Each of the channels should also be described in the X25PVC file,although if they are not they will be treated as PVC 'B' ends. Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

nvX25confLtc 11.1.230.5.10.3.3.1.9
Lowest Two-Way SVC (ltc) This field defines the lowest logical channel number (LCN) that may be used for both incoming calls and outgoing calls. The range of logical channels from LTC to LTC+NTC-1 is available for incoming and outgoing calls. Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

nvX25confNic 11.1.230.5.10.3.3.1.10
Number of Incoming SVCs (nic) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

nvX25confNoc 11.1.230.5.10.3.3.1.11
Number of Outgoing SVCs (noc) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

nvX25confNpc 11.1.230.5.10.3.3.1.12
Number of PVCs (npc) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

nvX25confNtc 11.1.230.5.10.3.3.1.13
Number of Two-Way SVCs (ntc) .nfl index .nfl capitalize .note The four ranges (LPC to LPC+NPC-1; LIC to LIC+NIC-1; LTC to LTC+NTC-1 ;and LOC to LOC+NOC-1) must not overlap. Futhermore,to avoid channel assignments collisions between DTEs and DCEs,it is recommended that the ranges be assigned thus: .br;For DTEs: LIC to LIC+NIC-1 < LTC to LTC+NTC-1 < LOC to LOC+NOC-1 .br;For DCEs: LIC to LIC+NIC-1 > LTC to LTC+NTC-1 > LOC to LOC+NOC-1 .end note .fl index .fl capitalize Default value is 28.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

nvX25confAcktimer 11.1.230.5.10.3.3.1.14
Packet Acknowledgement Timer (acktimer) defines if t2 procedure is going to be used or not,and if it is going to be used what t2 time period will be in one tenths of a second. When t2 is zero,procedure to delay acknowledgement will not be performed. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

nvX25confAckthresh 11.1.230.5.10.3.3.1.15
Acknowledgement Threshold (ackthresh) acknowledgement threshold is used to acknowledge received data when certain number of data packets received,even if t2 timer has not expired. It is used only if t2 procedure is active,ie acktime is greater than zero. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

nvX25confNuireq 11.1.230.5.10.3.3.1.16
NUI required
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25confCugformat 11.1.230.5.10.3.3.1.17
Closed User Group Format (cugformat) This field indicates the format of closed user groups to which this interface subscribes. If the type is basic,the two digit format of the CUG facility request is used. If the type is extend the four digit format is used. Default value is basic (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER basic(1)  

nvX25confDbmod 11.1.230.5.10.3.3.1.18
D-Bit Modification (dbmod) This field enables d bit modification,where all data packets received from the link are assumed to have their delivery confirmation bit set,and all data packets transmitted have it reset. This is only present to cater to older network implementations that do not support delivery confirmation. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25confDefpsze 11.1.230.5.10.3.3.1.19
Default Packet Size (defpsze) This value sets the maximum packet size that can be transferred across the interface if packet size negotiation is disabled (flowneg = no/wsz) or is not requested. If flow control parameter negotiation is enabled (flowneg = yes/psz), this value is used as a starting point and may be negotiated, with the network, up to the value of maxpsze or down to the minimum value of 16. Values for packet size requested by components (eg ITI) are preferentially used if flow control negotiation is enabled (flowneg = yes/psz) AND if the requested values are between maxpsze and 16; in all other cases defpsze is used. Default value is 7+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b16(5), b32(6), b64(7), b128(8), b256(9), b512(10), b1024(11), b2048(12), b4096(13)  

nvX25confDefwsze 11.1.230.5.10.3.3.1.20
Default Window Size (defwsze) This field sets the default value for the packet-level window size to be used when transferring packets if flow-control negotiation is disabled (flowneg = no/psz) or is not requested. If flow control parameter negotiation is enabled (flowneg=yes/wsz) then this value is used as a starting point and may be negotiated up to the maximum value set by maxwsze or down to a minimum value of 1. If this field is set to a value greater than 7,the interface must be configured for extended packet numbering (xtend = yes). Values for window size requested by components (eg ITI) are preferentially used if flow control negotiation is enabled (flowneg = yes/wsz) AND if the requested values are between maxwsze and 1; in all other cases defwsze is used. Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

nvX25confDeftput 11.1.230.5.10.3.3.1.21
Default Throughput Class (deftput) This field sets the initial value to be used for the throughput class for the virtual call if throughput-class negotiation is disabled (thruneg = no) or is not requested. If throughput-class negotiation is enabled (thruneg = yes), this value is used as a starting point and may be negotiated, with the network,downwards. Values for throughputclass negotiation requested by components (eg ITI) are preferentially used if throughput-class negotiation is enabled (thruneg = yes) AND if the requested values are less than deftput; in all other cases deftput is used. .note;Although CCITT defines throughput classes in terms of a guaranteed data-rate,throughput classes are only implemented to the extent of arranging that packets of a higher throughput-class are serviced before those of a lower class. .end note Default value is 10+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bps75(4), bps150(5), bps300(6), bps600(7), bps1200(8), bps2400(9), bps4800(10), bps9600(11), bps19200(12), bps48000(13)  

nvX25confDiagsupr 11.1.230.5.10.3.3.1.22
Diagnostic Packet Suppression (diagsupr) This field suppresses or enables the emission of DIAG diagnostic packets on some network protocol violations. Default value is no (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25confDirection 11.1.230.5.10.3.3.1.23
Call Direction Allowed (direction) This field indicates whether incoming and outgoing calls may be made over this interface. Default value is 3+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER incoming(2), outgoing(3), twoway(4)  

nvX25confFlowneg 11.1.230.5.10.3.3.1.24
Flow Control Negotiation (flowneg) This field enables or disables negotiation of the flow control parameters,window size and packet size. Default value is no (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2), psn(3), wsn(4)  

nvX25confFstacc 11.1.230.5.10.3.3.1.25
Fast Select Acceptance (fstacc) This field defines whether fast-select call requests are accepted. Default value is no (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25confUpdncmd 11.1.230.5.10.3.3.1.26
Link Up/Down Command This field is the string id of a script like command that may bring other links up or down when this link goes up or down format: netup-cmds>netdown-cmds netup-cmds: >netx.up/down... netdown-cmds: netx.up/down... example: >netw.up>netx.down>>nety.up>netz.down Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvX25confMaxpsze 11.1.230.5.10.3.3.1.27
Maximum Packet Size (maxpsze) This value is the maximum acceptable value for the largest packet that can be sent across the interface. It is used as an upper-bound in packet size negotiation. Default value is 7+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b16(5), b32(6), b64(7), b128(8), b256(9), b512(10), b1024(11), b2048(12), b4096(13)  

nvX25confMaxwsze 11.1.230.5.10.3.3.1.28
Maximum Window Size (maxwsze) This field sets the maximum acceptable value for the packet-level window size to be used when transferring packets. It is used as a upper-bound in window size negotiation. If this field is set to a value greater than 7,the interface must be configured for extended packet numbering (xtend = yes). Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

nvX25confNetaddr 11.1.230.5.10.3.3.1.29
Calling Network Address (netaddr) If this field is not empty,the contents will be supplied as the calling network address in all call request packets transmitted,overriding anything supplied by the network user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvX25confNettype 11.1.230.5.10.3.3.1.30
X.25 Network Type (nettype) This field indicates the local variety of X.25 network and is primarily used to show how to interpret non-X.25 facilities of the local network.If nettype = unknown,non-X.25 facilities are passed transparently through a switch and ignored by a PAD. Default value is ccitt (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ccitt(1), datapac(2), transpac(3), upss(4), transb(6)  

nvX25confNetvrsion 11.1.230.5.10.3.3.1.31
Network Version (netvrsion) This field indicates which version of the X.25 recommendation to which the network interface should adhere. Default value is 80.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v1976(77), v1980(81), v1984(85)  

nvX25confPktbuf 11.1.230.5.10.3.3.1.32
Packet Buffer for Unbalance Window For unbalanced window enhancement,FRR will be generated when the number of unacknowledged transmitted packets reaches the value of the PKTBUF field. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

nvX25confStndbytim 11.1.230.5.10.3.3.1.33
Standby Timer (stndbytim) How many seconds the box will wait before dropping dialout connection when there is no vc connected. Default value is 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvX25confRevacc 11.1.230.5.10.3.3.1.34
Reverse Charging Acceptance (revacc) In an X.25 DTE configuration,this field defines whether an incoming call indicating reverse charging is passed up to the Network Bus or rejected immediately. In an X.25 DCE configuration,it indicates whether a reverse charging call to the DTE should be passed through or cleared. In X.75 configurations this field has no significance. Default value is yes (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25confThruneg 11.1.230.5.10.3.3.1.35
Throughput Class Negotiation (thruneg) This field enables or disables negotiation of throughput classes. Default value is (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25confTx0 11.1.230.5.10.3.3.1.36
Restart Request Timer (tx0) This field defines the value,in seconds,for restart indication timer#(T10 - DCE appearance) restart request timer####(T20 - DTE appearance) Recommended values are: T10 - 60s T20 - 180s Default value is 180.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvX25confTx1 11.1.230.5.10.3.3.1.37
Call Request Timer (tx1) This field defines the value,in seconds,for - incoming call timer######(T11 - DCE appearance) - call request timer#######(T21 - DTE appearance) Recommended values are: T11 - 180s T21 - 200s Default value is 200.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvX25confTx2 11.1.230.5.10.3.3.1.38
Reset Request Timer (tx2) This field defines the value,in seconds,for - reset indication timer###(T12 - DCE appearance) - reset request timer######(T22 - DTE appearance) Recommended values are: T12 - 60s T22 - 180s Default value is 180.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvX25confTx3 11.1.230.5.10.3.3.1.39
Clear Request Timer (tx3) This field defines the value,in seconds,for - clear indication timer###(T13 - DCE appearance) - clear request timer######(T23 - DTE appearance) Recommended values are: T13 - 60s T23 - 180s Default value is 180.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvX25confXtend 11.1.230.5.10.3.3.1.40
Extended Packet Numbering (xtend) This field allows the extended packet sequencing format (modulo 128) to be used. If this option is not selected,packet sequencing is modulo 8. Default value is no (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25confNuirtg 11.1.230.5.10.3.3.1.42
If this field is set to yes,route is based on NUI using x25nuimap entries.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25confIsdnaddr 11.1.230.5.10.3.3.1.43
Get calling address from ISDN? Default value is no (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvX25nuimap 11.1.230.5.10.4
OBJECT IDENTIFIER    

nvX25nuimapMaxRec 11.1.230.5.10.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25nuimapNumRec 11.1.230.5.10.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25nuimapTable 11.1.230.5.10.4.3
x25nuimap file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvX25nuimapEntry

nvX25nuimapEntry 11.1.230.5.10.4.3.1
x25nuimap record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvX25nuimapEntry  

nvX25nuimapIndex 11.1.230.5.10.4.3.1.1
Index of x25nuimap record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvX25nuimapNui 11.1.230.5.10.4.3.1.2
NUI value to match
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..58)  

nvX25nuimapCalled 11.1.230.5.10.4.3.1.3
Called Network Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvX25nuimapStatus 11.1.230.5.10.4.3.1.4
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvXbillconf 11.1.230.5.10.5
OBJECT IDENTIFIER    

nvXbillconfMaxRec 11.1.230.5.10.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXbillconfNumRec 11.1.230.5.10.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXbillconfTable 11.1.230.5.10.5.3
xbillconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvXbillconfEntry

nvXbillconfEntry 11.1.230.5.10.5.3.1
xbillconf record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvXbillconfEntry  

nvXbillconfIndex 11.1.230.5.10.5.3.1.1
Index of xbillconf record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXbillconfEnable 11.1.230.5.10.5.3.1.2
Enable/Disable xbillstat accounting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

nvXbillconfSegsize 11.1.230.5.10.5.3.1.3
Segment size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

nvXbillconfBilltime 11.1.230.5.10.5.3.1.4
Time xbillstat records will remain open for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvXnuaset 11.1.230.5.10.6
OBJECT IDENTIFIER    

nvXnuasetMaxRec 11.1.230.5.10.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXnuasetNumRec 11.1.230.5.10.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXnuasetTable 11.1.230.5.10.6.3
xnuaset file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvXnuasetEntry

nvXnuasetEntry 11.1.230.5.10.6.3.1
xnuaset record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvXnuasetEntry  

nvXnuasetIndex 11.1.230.5.10.6.3.1.1
Index of xnuaset record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXnuasetSetname 11.1.230.5.10.6.3.1.2
Nuaset name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvXnuasetNua1 11.1.230.5.10.6.3.1.3
Nua1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvXnuasetNua2 11.1.230.5.10.6.3.1.4
Nua2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvXnuasetNua3 11.1.230.5.10.6.3.1.5
Nua3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvXnuasetStatus 11.1.230.5.10.6.3.1.10
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvXbillstat 11.1.230.5.10.7
OBJECT IDENTIFIER    

nvXbillstatMaxRec 11.1.230.5.10.7.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXbillstatNumRec 11.1.230.5.10.7.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXbillstatTable 11.1.230.5.10.7.3
xbillstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvXbillstatEntry

nvXbillstatEntry 11.1.230.5.10.7.3.1
xbillstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvXbillstatEntry  

nvXbillstatIndex 11.1.230.5.10.7.3.1.1
Index of xbillstat record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXbillstatNodeid 11.1.230.5.10.7.3.1.2
Node Identifier
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvXbillstatDate 11.1.230.5.10.7.3.1.3
Date of Record Generation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..6)  

nvXbillstatTime 11.1.230.5.10.7.3.1.4
Time of Record Generation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvXbillstatNuaset 11.1.230.5.10.7.3.1.5
Nuaset used to generate this record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvXbillstatDatarate 11.1.230.5.10.7.3.1.6
ISDN speed
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvXbillstatTxseg 11.1.230.5.10.7.3.1.7
Number of transmitted X.25 segments.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstatRxseg 11.1.230.5.10.7.3.1.8
Number of received X.25 segments.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstatRxcallc 11.1.230.5.10.7.3.1.9
Number of X.25 Calls Accepted by the Host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstatHostclr 11.1.230.5.10.7.3.1.10
Number of X.25 Calls Cleared by the Host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstatNetclr 11.1.230.5.10.7.3.1.11
Number of X.25 Calls Cleared by the Network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstatTxpak 11.1.230.5.10.7.3.1.12
Number of Transmitted X.25 packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstatRxpak 11.1.230.5.10.7.3.1.13
Number of X.25 packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstatLess5 11.1.230.5.10.7.3.1.14
Number of ISDN calls less that 5 secs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstat5to10 11.1.230.5.10.7.3.1.15
Number of ISDN calls from 5 to 10 secs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstat10to15 11.1.230.5.10.7.3.1.16
Number of ISDN calls from 10 to 15 secs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstat15to20 11.1.230.5.10.7.3.1.17
Number of ISDN calls from 15 to 20 secs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstatGrtr20 11.1.230.5.10.7.3.1.18
Number of ISDN calls greater than 20 secs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvXbillstatClosed 11.1.230.5.10.7.3.1.19
Record open or closed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

nvPriconf 11.1.230.5.11.1
OBJECT IDENTIFIER    

nvPriconfMaxRec 11.1.230.5.11.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPriconfNumRec 11.1.230.5.11.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPriconfTable 11.1.230.5.11.1.3
priconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPriconfEntry

nvPriconfEntry 11.1.230.5.11.1.3.1
priconf record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPriconfEntry  

nvPriconfIndex 11.1.230.5.11.1.3.1.1
Index of priconf record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPriconfPriname 11.1.230.5.11.1.3.1.2
PRI name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9)  

nvPriconfSwitch 11.1.230.5.11.1.3.1.3
Switch type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), att4ess(17), att5ess(18), dms100(20), ntt(22), v1tr6(24), net5(27), vn3(33)  

nvPriconfDsltype 11.1.230.5.11.1.3.1.4
DSL type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER switched(1)  

nvPriconfRouting 11.1.230.5.11.1.3.1.5
Routing address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER caladr(1), subadr(2)  

nvPriconfDliname 11.1.230.5.11.1.3.1.6
DLI name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvPriconfRsrcpool 11.1.230.5.11.1.3.1.7
B channel pool name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvPriconfStatus 11.1.230.5.11.1.3.1.9
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPriconfBusyout 11.1.230.5.11.1.3.1.10
specifies whether new calls should be rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  


nvPriconfDlirst 11.1.230.5.11.1.3.1.12
Added T1/E1 L1/L2 recovery
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvPriconfDchrst 11.1.230.5.11.1.3.1.13
Added T1/E1 L1/L2 recovery
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvPriconfNfasdch 11.1.230.5.11.1.3.1.14
NFAS type primary or backup 1- No NFAS interface configured 2- Primary NFAS interface 3- Secondary NFAS interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), primary(2), backup(3)  

nvPriconfNfasif 11.1.230.5.11.1.3.1.15
NFAS Interface numbers
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..9  

nvPriconfNfasgrp 11.1.230.5.11.1.3.1.16
NFAS group numbers
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

nvPriconfTsshift 11.1.230.5.11.1.3.1.17
Run T1 timeslot format on E1 lines
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvPriconfX25diags 11.1.230.5.11.1.3.1.18
String defining X.25 diagnostic lookup table
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvPriconfNumbtype 11.1.230.5.11.1.3.1.19
Type of Number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(2), internat(3), national(4), netspec(5), subscrib(6), abbrev(8)  

nvPriconfNumbplan 11.1.230.5.11.1.3.1.20
Numbering plan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(2), isdn(3), data(5), telex(6), natstand(10), private(11)  

nvPriconfModemcap 11.1.230.5.11.1.3.1.21
Speech or audio(3.1 or 7 kHz).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER speech(1), audio3k(2), audio7k(3)  

nvPriconfL1prot 11.1.230.5.11.1.3.1.22
L1 protocol enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvPriconfStandby 11.1.230.5.11.1.3.1.23
standby enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvPristat 11.1.230.5.11.2
OBJECT IDENTIFIER    

nvPristatMaxRec 11.1.230.5.11.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPristatNumRec 11.1.230.5.11.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPristatTable 11.1.230.5.11.2.3
pristat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPristatEntry

nvPristatEntry 11.1.230.5.11.2.3.1
pristat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPristatEntry  

nvPristatIndex 11.1.230.5.11.2.3.1.1
Index of pristat record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPristatPriname 11.1.230.5.11.2.3.1.2
PRI name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9)  

nvPristatStatus 11.1.230.5.11.2.3.1.3
interface status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

nvPristatCallrecvs 11.1.230.5.11.2.3.1.4
number of calls received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatCallaceps 11.1.230.5.11.2.3.1.5
number of incoming connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatCallrejs 11.1.230.5.11.2.3.1.6
number of incoming calls rejected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatCallinrels 11.1.230.5.11.2.3.1.7
number of inside released connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatCalloutrels 11.1.230.5.11.2.3.1.8
number of outside released connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatEstreq 11.1.230.5.11.2.3.1.9
Number of established requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatDlirst 11.1.230.5.11.2.3.1.10
Number of dli chip resets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatDchrst 11.1.230.5.11.2.3.1.11
Number of d-channel resets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatCallcur 11.1.230.5.11.2.3.1.12
Number of current calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatDchanup 11.1.230.5.11.2.3.1.13
Number in seconds d channel comes up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatDtreset 11.1.230.5.11.2.3.1.14
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvPristatNcurincom 11.1.230.5.11.2.3.1.15
Current Number of simulataneous incoming calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNcuroutgo 11.1.230.5.11.2.3.1.16
Current Number of simulataneous outgoing calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNrxsetup 11.1.230.5.11.2.3.1.17
Number of SETUP messages received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatMaxrsetup 11.1.230.5.11.2.3.1.18
Max number of outstanding SETUP messages for dial-in.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNrxsetupa 11.1.230.5.11.2.3.1.19
Number of aborted rx SETUP messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNtxconn 11.1.230.5.11.2.3.1.20
Number of CONNECT messages set for dial-in.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNtxbusy 11.1.230.5.11.2.3.1.21
Number of dial-in fail due to busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNtxsetup 11.1.230.5.11.2.3.1.22
Number of SEUTP messages sent for dial-out.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatMaxtsetup 11.1.230.5.11.2.3.1.23
Max number of outstanding tx SETUP messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNtxsetupa 11.1.230.5.11.2.3.1.24
Number of aborted tx SETUP messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNrxconn 11.1.230.5.11.2.3.1.25
Number of CONNECT recieved for dial-in.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNrxbusy 11.1.230.5.11.2.3.1.26
Number of dial-out fails due to busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatNnoanswer 11.1.230.5.11.2.3.1.27
Number of fail no answer for dialout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatMaxincom 11.1.230.5.11.2.3.1.28
Maximum number of simultaneous incoming calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatMaxoutgo 11.1.230.5.11.2.3.1.29
Maximum number of simultaneous outgoing calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatCallsent 11.1.230.5.11.2.3.1.30
Number of outgoing calls sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatCallconn 11.1.230.5.11.2.3.1.31
Number of outgoing calls connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPristatCallfail 11.1.230.5.11.2.3.1.32
Number of outgoing calls failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPricstat 11.1.230.5.11.3
OBJECT IDENTIFIER    

nvPricstatMaxRec 11.1.230.5.11.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricstatNumRec 11.1.230.5.11.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricstatTable 11.1.230.5.11.3.3
pricstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPricstatEntry

nvPricstatEntry 11.1.230.5.11.3.3.1
pricstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPricstatEntry  

nvPricstatIndex 11.1.230.5.11.3.3.1.1
Index of pricstat record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricstatSeqno 11.1.230.5.11.3.3.1.2
sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricstatCallid 11.1.230.5.11.3.3.1.3
Call ID number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvPricstatRate 11.1.230.5.11.3.3.1.4
data rate used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nvPricstatState 11.1.230.5.11.3.3.1.5
channel state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disc(1), idle(2), waiting(3), active(4), clearing(5)  

nvPricstatPriname 11.1.230.5.11.3.3.1.6
PRI interface name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9)  

nvPricstatCalldir 11.1.230.5.11.3.3.1.7
call direction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), out(2), in(3)  

nvPricstatContype 11.1.230.5.11.3.3.1.8
connectuon type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER audio(1), data(9), video(25), noType(256)  

nvPricstatL1prot 11.1.230.5.11.3.3.1.9
layer 1 protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), v110(2), g711-M(3), g711-A(4), g712(5), h221(6), nON-CCITT(8), v120(9), x31(10)  

nvPricstatCallingno 11.1.230.5.11.3.3.1.10
Calling number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvPricstatCalledno 11.1.230.5.11.3.3.1.11
Called number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvPricstatBchanl 11.1.230.5.11.3.3.1.12
B channel used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvPridstat 11.1.230.5.11.4
OBJECT IDENTIFIER    

nvPridstatMaxRec 11.1.230.5.11.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPridstatNumRec 11.1.230.5.11.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPridstatTable 11.1.230.5.11.4.3
pridstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPridstatEntry

nvPridstatEntry 11.1.230.5.11.4.3.1
pridstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPridstatEntry  

nvPridstatIndex 11.1.230.5.11.4.3.1.1
Index of pridstat record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPridstatPriname 11.1.230.5.11.4.3.1.2
PRI interface name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9)  

nvPridstatEventno 11.1.230.5.11.4.3.1.3
event number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER channelMissing(114), outcallEstablished(115), noTimeslotInfoRcvd(116), channelNotFound(117), invalidEvent(118), unknownEvent(119), noChannelAvail(120), directoryNumMismatch(121), originatorNumMismatch(122), mandatoryInfoElemMissing(123), calledNumBusy(124), callingNumBusy(125), incallEstablished(126), dchannelConnect(127), channelCollision(128), noTimeslotAvailable(129), reassignTimeslots(130), undefinedString(255), undefinedEvent(253)  

nvPridstatProtlayer 11.1.230.5.11.4.3.1.4
layer where event occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lapd(1), l3err(2), l3caus(3), l3call(4), ckRtr(5)  

nvPridstatTime 11.1.230.5.11.4.3.1.5
time when event occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPridstatDate 11.1.230.5.11.4.3.1.6
date where event occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricuconf 11.1.230.5.11.5
OBJECT IDENTIFIER    

nvPricuconfMaxRec 11.1.230.5.11.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricuconfNumRec 11.1.230.5.11.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricuconfTable 11.1.230.5.11.5.3
pricuconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPricuconfEntry

nvPricuconfEntry 11.1.230.5.11.5.3.1
pricuconf record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPricuconfEntry  

nvPricuconfIndex 11.1.230.5.11.5.3.1.1
Index of pricuconf record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricuconfThresh1 11.1.230.5.11.5.3.1.2
Threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..30  

nvPricuconfThresh2 11.1.230.5.11.5.3.1.3
Threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 31..60  

nvPricuconfThresh3 11.1.230.5.11.5.3.1.4
Threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 61..90  

nvPricuconfThresh4 11.1.230.5.11.5.3.1.5
Threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 91..120  

nvPricuconfInterval 11.1.230.5.11.5.3.1.6
Time period.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..60  

nvPricuconfStatus 11.1.230.5.11.5.3.1.7
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPricustat 11.1.230.5.11.6
OBJECT IDENTIFIER    

nvPricustatMaxRec 11.1.230.5.11.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatNumRec 11.1.230.5.11.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatTable 11.1.230.5.11.6.3
pricustat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPricustatEntry

nvPricustatEntry 11.1.230.5.11.6.3.1
pricustat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPricustatEntry  

nvPricustatIndex 11.1.230.5.11.6.3.1.1
Index of pricustat record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatThresh1 11.1.230.5.11.6.3.1.2
Number of calls received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatCounter1 11.1.230.5.11.6.3.1.3
Number of calls received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatThresh2 11.1.230.5.11.6.3.1.4
Number of incoming connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatCounter2 11.1.230.5.11.6.3.1.5
Number of incoming connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatThresh3 11.1.230.5.11.6.3.1.6
Number of incoming calls rejected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatCounter3 11.1.230.5.11.6.3.1.7
Number of incoming calls rejected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatThresh4 11.1.230.5.11.6.3.1.8
Number of inside released connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatCounter4 11.1.230.5.11.6.3.1.9
Number of inside released connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPricustatResettime 11.1.230.5.11.6.3.1.10
Calling number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

nvPppstat 11.1.230.5.12.1
OBJECT IDENTIFIER    

nvPppstatMaxRec 11.1.230.5.12.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPppstatNumRec 11.1.230.5.12.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPppstatTable 11.1.230.5.12.1.3
pppstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPppstatEntry

nvPppstatEntry 11.1.230.5.12.1.3.1
pppstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPppstatEntry  

nvPppstatIndex 11.1.230.5.12.1.3.1.1
Index of pppstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPppstatName 11.1.230.5.12.1.3.1.2
statistics Name (name) statistics name and number (ie,'ps1')
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..5)  

nvPppstatPppAdminS 11.1.230.5.12.1.3.1.3
ppp admin status (pppAdminS) lcp link Admin Status down/up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

nvPppstatLcpOperS 11.1.230.5.12.1.3.1.4
lcp operation status (lcpOperS) lcp link Admin Status down/up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

nvPppstatIpcpOperS 11.1.230.5.12.1.3.1.5
ipcp operation status (ipcpOperS) ipcp link status down/up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

nvPppstatInOctets 11.1.230.5.12.1.3.1.6
Octets received (InOctets) The number of good data bytes received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatInPkts 11.1.230.5.12.1.3.1.7
good packets received (InPkts) The number of good received frames Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatInDiscard 11.1.230.5.12.1.3.1.8
discarded good packets (InDiscard) The total number of good frames dicarded due to lack of buffers Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatInError 11.1.230.5.12.1.3.1.9
Bad packets received (InError) The total number of frames received due to crc,format etc. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatInEch 11.1.230.5.12.1.3.1.10
received echo requests (InEch) The number of echo request packets recieved. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatInEchRp 11.1.230.5.12.1.3.1.11
echo reply received (InEchRp) The num of packets Rxed due to the echo-req sent (software loopback) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatInDiscRq 11.1.230.5.12.1.3.1.12
discard requests Rxed (InDiscRq) The number of discard request packets received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatUnKnwnPr 11.1.230.5.12.1.3.1.13
rxed Unknown protocol (UnKnwnPr) The number of link quality reports received on this PPP link Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatOutOctets 11.1.230.5.12.1.3.1.14
Octets transmitted (OutOctets) The number of bytes transmitted on the ppp link. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatOutPkts 11.1.230.5.12.1.3.1.15
Packets transmitted (OutPkts) The number of pakets transmitted on the PPP link. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatOutDiscrd 11.1.230.5.12.1.3.1.16
output errors (OutDiscrd) The number of outbound pkts droped due to lack of buffers. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatOutErrors 11.1.230.5.12.1.3.1.17
output errors (OutErrors) The number of outbound pkts could not be txed due to errors. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatOutEch 11.1.230.5.12.1.3.1.18
echo request pkts transmitted (OutEch) The number of lcp echo request packets transmitted Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatOutEchRp 11.1.230.5.12.1.3.1.19
echo reply transmitted (OutEchRp) The num of echo reply packets Txed due to the echo-req Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatOutDiscRq 11.1.230.5.12.1.3.1.20
discard requests Txed (OutDiscRq) The number of discard request packets received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatUserName 11.1.230.5.12.1.3.1.21
authenticated username of remote user (username).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvPppstatIpAddr 11.1.230.5.12.1.3.1.22
IP address in use on this PPP link (ipaddr).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPppstatBundleId 11.1.230.5.12.1.3.1.23
Bundle identifier (mpstat record id) of multilink PPP bundle in which this link is being used if nvPppstatMultilink is yes (bundleid).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPppstatIpcp 11.1.230.5.12.1.3.1.24
ipcp record number used for this link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  


nvPppstatCcpOperS 11.1.230.5.12.1.3.1.26
ccp Operation status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

nvPppstatComprot 11.1.230.5.12.1.3.1.27
Compression protocol in use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), stacopt4(2), stacopt3(3), mppc(4)  

nvPppstatTnnlState 11.1.230.5.12.1.3.1.28
State of a tunneled session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), l2tpwt(2), l2tpcn(3)  

nvPppstatTnnlId 11.1.230.5.12.1.3.1.29
Tunnel ID assosiated with the tunneled session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPppstatCallId 11.1.230.5.12.1.3.1.30
Call ID assosiated with the tunneled session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPppstatOutCmPcnt 11.1.230.5.12.1.3.1.31
Percent compression on tx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatInCmPcnt 11.1.230.5.12.1.3.1.32
Percent compression on rx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatOutExpnds 11.1.230.5.12.1.3.1.33
Number of packets expanded by compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvPppstatDtreset 11.1.230.5.12.1.3.1.34
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvPppstatRealm 11.1.230.5.12.1.3.1.35
First 64 characters of the realm if parsing NAI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvLcpconf 11.1.230.5.12.2
OBJECT IDENTIFIER    

nvLcpconfMaxRec 11.1.230.5.12.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLcpconfNumRec 11.1.230.5.12.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLcpconfTable 11.1.230.5.12.2.3
lcpconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvLcpconfEntry

nvLcpconfEntry 11.1.230.5.12.2.3.1
lcpconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvLcpconfEntry  

nvLcpconfIndex 11.1.230.5.12.2.3.1.1
Index of lcpconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvLcpconfPort 11.1.230.5.12.2.3.1.2
Link Name (port).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvLcpconfRsrcpool 11.1.230.5.12.2.3.1.3
Resource Poolname.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvLcpconfItiudata 11.1.230.5.12.2.3.1.4
iti user data (itiudata)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvLcpconfAccm 11.1.230.5.12.2.3.1.5
Async. Control Char Map (accm)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvLcpconfMode 11.1.230.5.12.2.3.1.6
interface type (mode) Default value is psync (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sync(1), async(2), tpp(3), x25(4)  

nvLcpconfPfc 11.1.230.5.12.2.3.1.7
protocol field compression (pfc) Default value is yes (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvLcpconfAcfc 11.1.230.5.12.2.3.1.8
addr. ctrl fields comp. (acfc) Default value is yes (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvLcpconfRestartim 11.1.230.5.12.2.3.1.9
lcp reqests restart (restartim) Default value is 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvLcpconfMaxterm 11.1.230.5.12.2.3.1.10
terminate request count (maxterm) Default value is 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvLcpconfMaxcfg 11.1.230.5.12.2.3.1.11
configure request count (maxcfg) Default value is 10.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvLcpconfMaxnak 11.1.230.5.12.2.3.1.12
config-Nak send (maxnak) Default value is 10.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvLcpconfInactivty 11.1.230.5.12.2.3.1.13
nbus call inact timer (inactivty) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvLcpconfAuth 11.1.230.5.12.2.3.1.14
ppp authentication. none, 1, Disable authentication pap, 2, Password Authentication Protocol chap, 3, Challenge Handshake Authentication Protocol either, 4, First use CHAP, then try PAP telno, 5, Telephone Number Authentication prxypap, 6, Proxy PAP partial authentication prxychap, 7, Proxy CHAP partial authentication prxyeith, 8 Proxy PAP or CHAP partial authentication
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), pap(2), chap(3), either(4), telno(5), prxypap(6), prxychap(7), prxyeith(8)  

nvLcpconfSecurtmr 11.1.230.5.12.2.3.1.15
security timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvLcpconfChalint 11.1.230.5.12.2.3.1.16
rechallenge interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  


nvLcpconfpppTrapEn 11.1.230.5.12.2.3.1.18
If yes then trap generation is enabled for LCP state changes and other PPP events.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvLcpconfComprot1 11.1.230.5.12.2.3.1.19
First choice for compression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), stacopt4(2), stacopt3(3), mppc(4)  

nvLcpconfComprot2 11.1.230.5.12.2.3.1.20
Second choice for compression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), stacopt4(2), stacopt3(3), mppc(4)  

nvLcpconfUsrdelim 11.1.230.5.12.2.3.1.21
Delimiter for NAI parsing
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvLcpconfNaifwd 11.1.230.5.12.2.3.1.22
Forward full NAI or only username
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER useronly(1), fullnai(2)  

nvLcpconfTxmaxbuf 11.1.230.5.12.2.3.1.23
transmit buffering
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 50..500  

nvLcpconfStatus 11.1.230.5.12.2.3.1.26
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvMpconf 11.1.230.5.12.3
OBJECT IDENTIFIER    

nvMpconfMaxRec 11.1.230.5.12.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpconfNumRec 11.1.230.5.12.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpconfTable 11.1.230.5.12.3.3
mpconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvMpconfEntry

nvMpconfEntry 11.1.230.5.12.3.3.1
mpconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvMpconfEntry  

nvMpconfIndex 11.1.230.5.12.3.3.1.1
Index of Mpconf record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpconfProfile 11.1.230.5.12.3.3.1.2
Must match lcp record itiudata (async ppp) or rsrcpool (sync ppp) field for multilink to operate on the lcp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvMpconfAdminS 11.1.230.5.12.3.3.1.3
If set to enable no multilink sessions can be started from LCP records which match the nvMpconfProfile of this record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

nvMpconfTrapEnable 11.1.230.5.12.3.3.1.4
If set to yes Nevada enterprise traps will be generated for certain events occuring relative to multilink bundles. For example, when a new link joins a multilink bundle. No traps for multilink are generated if set to no.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvMpconfLnkLimit 11.1.230.5.12.3.3.1.5
The maximum number of links permitted in multilink bundles created from this mpconf record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..16  

nvMpconfTxFrag 11.1.230.5.12.3.3.1.6
When set to yes PPP datagrams larger than nvMpconfTxFragMin bytes will be fragmented before transmission on the links in the bundle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvMpconfTxFragMin 11.1.230.5.12.3.3.1.7
PPP datagrams smaller than mvMpconfTxFragMin bytes will not be fragmented before transmission regardless of the setting of nvMpconfTxFrag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 256..1500  

nvMpconfTxShortSeq 11.1.230.5.12.3.3.1.8
When set to yes the Nevada will attempt to negotiate the short sequence number option on multilink bundles created from this record. When set to no the Nevada will reject attempts to negotiate short sequence numbers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvMpconfComprot1 11.1.230.5.12.3.3.1.9
First choice for compression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), stacopt4(2), stacopt3(3), mppc(4), stacopt0(5), any(6)  

nvMpconfComprot2 11.1.230.5.12.3.3.1.10
Second choice for compression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), stacopt4(2), stacopt3(3), mppc(4), stacopt0(5), any(6)  

nvMpconfComptype 11.1.230.5.12.3.3.1.11
Second choice for compression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bundle(1), lnkbylnk(2)  

nvMpconfStatus 11.1.230.5.12.3.3.1.24
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvMpstatPart1 11.1.230.5.12.4
OBJECT IDENTIFIER    

nvMpstatPart1MaxRec 11.1.230.5.12.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpstatPart1NumRec 11.1.230.5.12.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpstatPart1Table 11.1.230.5.12.4.3
mpstatPart1 file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvMpstatPart1Entry

nvMpstatPart1Entry 11.1.230.5.12.4.3.1
mpstatPart1 record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvMpstatPart1Entry  

nvMpstatPart1Index 11.1.230.5.12.4.3.1.1
Index of MpstatPart1 record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpstatPart1UserName 11.1.230.5.12.4.3.1.2
Authenticated name of remote peer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvMpstatPart1IpcpOperS 11.1.230.5.12.4.3.1.3
Ipcp operation status (ipcpOperS)- IPCP protocol up or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

nvMpstatPart1Ipcp 11.1.230.5.12.4.3.1.4
ipcpconf file record number in use for this multilink bundle (ipcp).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpstatPart1IpAddress 11.1.230.5.12.4.3.1.5
IP address in use on this multilink bundle (ipaddr).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvMpstatPart1Profile 11.1.230.5.12.4.3.1.6
nvMpconfProfile value of nvMpconfTable entry (mpconf record) used to create this multilink bundle (profile).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvMpstatPart1RmtClass 11.1.230.5.12.4.3.1.7
Class of endpoint discriminator in use on remote (peer) end of multilink bundle (rmtClass).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(1), local(2), ipaddr(3), global(4), magicnum(5), dirnum(6)  

nvMpstatPart1RmtDisc 11.1.230.5.12.4.3.1.8
Value of endpoint discriminator in use on remote (peer) end of multilink bundle (rmtDisc).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..44)  

nvMpstatPart1LocClass 11.1.230.5.12.4.3.1.9
Class of endpoint discriminator in use on local (Nevada) end of multilink bundle (locClass).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(1), local(2), ipaddr(3), global(4), magicnum(5), dirnum(6)  

nvMpstatPart1LocDisc 11.1.230.5.12.4.3.1.10
Value of endpoint discriminator in use on local (Nevada) end of multilink bundle (rmtDisc).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..44)  

nvMpstatPart1RmtMRRU 11.1.230.5.12.4.3.1.11
Value for the Maximum Reassembled Receive Unit negotiated for remote (peer) end of multilink bundle (rmtMRRU).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpstatPart1LocMRRU 11.1.230.5.12.4.3.1.12
Value for the Maximum Reassembled Receive Unit negotiated for local (Nevada) end of multilink bundle (locMRRU).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpstatPart1RmtSeqS 11.1.230.5.12.4.3.1.13
Indicates whether short or long sequence numbers are in use for multilink datagrams transmitted to the peer by the Nevada (rmtSeq).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER short(1), long(2)  

nvMpstatPart1LocSeqS 11.1.230.5.12.4.3.1.14
Indicates whether short or long sequence numbers are in use for multilink datagrams received by the Nevada (locSeq).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER short(1), long(2)  

nvMpstatPart1Link1 11.1.230.5.12.4.3.1.15
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link2 11.1.230.5.12.4.3.1.16
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link3 11.1.230.5.12.4.3.1.17
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link4 11.1.230.5.12.4.3.1.18
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link5 11.1.230.5.12.4.3.1.19
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link6 11.1.230.5.12.4.3.1.20
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link7 11.1.230.5.12.4.3.1.21
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link8 11.1.230.5.12.4.3.1.22
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link9 11.1.230.5.12.4.3.1.23
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link10 11.1.230.5.12.4.3.1.24
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link11 11.1.230.5.12.4.3.1.25
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link12 11.1.230.5.12.4.3.1.26
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link13 11.1.230.5.12.4.3.1.27
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link14 11.1.230.5.12.4.3.1.28
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link15 11.1.230.5.12.4.3.1.29
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart1Link16 11.1.230.5.12.4.3.1.30
The LCP record number corresponding to nth link in the multilink bundle (link n).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvMpstatPart2 11.1.230.5.12.5
OBJECT IDENTIFIER    

nvMpstatPart2MaxRec 11.1.230.5.12.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpstatPart2NumRec 11.1.230.5.12.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpstatPart2Table 11.1.230.5.12.5.3
mpstatPart2 file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvMpstatPart2Entry

nvMpstatPart2Entry 11.1.230.5.12.5.3.1
mpstatPart2 record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvMpstatPart2Entry  

nvMpstatPart2Index 11.1.230.5.12.5.3.1.1
Index of MpstatPart2 record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvMpstatPart2InOctets 11.1.230.5.12.5.3.1.2
Octets received (InOctets) The number of good data bytes received Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InPkts 11.1.230.5.12.5.3.1.3
good packets received (InPkts) The number of good received frames Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InBfrags 11.1.230.5.12.5.3.1.4
The number of good received multilink frames with the B bit set in the multilink header (beginning fragment). Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InEfrags 11.1.230.5.12.5.3.1.5
The number of good received multilink frames with the E bit set in the multilink header (ending fragment) . Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InMfrags 11.1.230.5.12.5.3.1.6
The number of good received multilink frames with neither the B nor the E bit set in the multilink header (middle fragment). Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InRsmErr 11.1.230.5.12.5.3.1.7
number of times the multilink receive algorithm detected one or more lost PPP datagrams (InRsmErr). Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InDiscrd 11.1.230.5.12.5.3.1.8
discarded good packets (InDiscrd) The total number of good frames dicarded due to lack of buffers Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InErrors 11.1.230.5.12.5.3.1.9
Bad packets received (InError) The total number of frames received with errors due to crc,format etc. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InEch 11.1.230.5.12.5.3.1.10
received echo requests (InEch) The number of echo request packets recieved. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InEchRp 11.1.230.5.12.5.3.1.11
echo reply received (InEchRp) The num of packets Rxed due to the echo-req sent (software loopback) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InDiscRq 11.1.230.5.12.5.3.1.12
discard requests Rxed (InDiscRq) The number of discard request packets received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2UnKnwnPr 11.1.230.5.12.5.3.1.13
rxed Unknown protocol (UnKnwnPr) The number of link quality reports received on this PPP link Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutOctets 11.1.230.5.12.5.3.1.14
Octets transmitted (OutOctets) The number of bytes transmitted on the ppp link. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutPkts 11.1.230.5.12.5.3.1.15
Packets transmitted (OutPkts) The number of pakets transmitted on the PPP link. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutBfrags 11.1.230.5.12.5.3.1.16
The number of multilink frames transmitted with the B bit set in the multilink header (beginning fragment). Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutEfrags 11.1.230.5.12.5.3.1.17
The number of multilink frames transmitted with the E bit set in the multilink header (ending fragment) . Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutMfrags 11.1.230.5.12.5.3.1.18
The number of multilink frames transmitted with neither the B nor the E bit set in the multilink header (middle fragment). Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutDiscrd 11.1.230.5.12.5.3.1.19
output errors (OutDiscrd) The number of outbound pkts droped due to lack of buffers. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutErrors 11.1.230.5.12.5.3.1.20
output errors (OutErrors) The number of outbound pkts could not be txed due to errors. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutEch 11.1.230.5.12.5.3.1.21
echo request pkts transmitted (OutEch) The number of lcp echo request packets transmitted Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutEchRp 11.1.230.5.12.5.3.1.22
echo reply transmitted (OutEchRp) The num of echo reply packets Txed due to the echo-req Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutDiscRq 11.1.230.5.12.5.3.1.23
discard requests Txed (OutDiscRq) The number of discard request packets received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutCmPcnt 11.1.230.5.12.5.3.1.24
Percent compression on tx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2InCmPcnt 11.1.230.5.12.5.3.1.25
Percent compression on rx.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2OutExpnds 11.1.230.5.12.5.3.1.26
Number of packets expanded by compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvMpstatPart2Dtreset 11.1.230.5.12.5.3.1.27
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvElxstat 11.1.230.5.15.1
OBJECT IDENTIFIER    

nvElxstatMaxRec 11.1.230.5.15.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvElxstatNumRec 11.1.230.5.15.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvElxstatTable 11.1.230.5.15.1.3
elxstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvElxstatEntry

nvElxstatEntry 11.1.230.5.15.1.3.1
elxstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvElxstatEntry  

nvElxstatIndex 11.1.230.5.15.1.3.1.1
Index of elxstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvElxstatPhysAddr 11.1.230.5.15.1.3.1.2
Ethernet Physical Address (PhysAddr) This field contains the Ethernet address as configured at the factory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvElxstatAdminStat 11.1.230.5.15.1.3.1.3
Desired Interface state (AdminStat) The desired state of the interface. This field reflects the desired state of the interface as determined by the enable field of the ELXCONF file,as well as the ELX.UP and ELX.DOWN commands.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(2), down(3)  

nvElxstatOperStat 11.1.230.5.15.1.3.1.4
Current Interface state (OperStat) The current operational state of the Ethernet interface. This is determined by the AdminStat and whether or not any transmit faults were detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(2), down(3)  

nvElxstatInOctets 11.1.230.5.15.1.3.1.5
Octets received on the interface (InOctets) The total number of octets received on the interface, including framing characters. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatInUcasts 11.1.230.5.15.1.3.1.6
Unicast packets delivered (InUcast) The number of subnetwork unicast packets delivered to a higher layer protocol. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatInNUcasts 11.1.230.5.15.1.3.1.7
Non unicast packets delivered (InNUcast) The number of non unicast,i.e.,subnetwork broadcast or subnetwork multicast,packets delivered to a higher layer protocol. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatInDiscards 11.1.230.5.15.1.3.1.8
Discarded input packets (InDiscard) The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatInErrors 11.1.230.5.15.1.3.1.9
Error input packets (InError) The number of inbound packets that contained errors preventing them from being deliverable to a higher layer protocol. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatUnKnwnPrs 11.1.230.5.15.1.3.1.10
Unknown protocol packets discarded (UnKnwnPr) The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatOutOctets 11.1.230.5.15.1.3.1.11
Octets transmitted from the interface (OutOctets) The total number of octets transmitted out the interface,including framing characters. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatOutUcasts 11.1.230.5.15.1.3.1.12
Unicast packets transmitted (OutUcast) The total number of packets that higher level protocols requested be transmitted to a subnetwork unicast address, including those that were discarded or not sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatOutNUcasts 11.1.230.5.15.1.3.1.13
Non unicast packets transmitted (OutNUcast) The total number of packets that highel level protocols requested be transmitted to a non unicast,i.e.,a subnetwork broadcast or subnetwork multicast,address, including those that were discarded or not sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatOutDiscrds 11.1.230.5.15.1.3.1.14
Discarded output packets (OutDiscrd) The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatOutErrors 11.1.230.5.15.1.3.1.15
Error output packets (OutErrors) The number of outbound packets that could not be transmitted because of errors. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvElxstatDtreset 11.1.230.5.15.1.3.1.16
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvElxconf 11.1.230.5.15.2
OBJECT IDENTIFIER    

nvElxconfMaxRec 11.1.230.5.15.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvElxconfNumRec 11.1.230.5.15.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvElxconfTable 11.1.230.5.15.2.3
elxconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvElxconfEntry

nvElxconfEntry 11.1.230.5.15.2.3.1
elxconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvElxconfEntry  

nvElxconfIndex 11.1.230.5.15.2.3.1.1
Index of elxconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvElxconfEnable 11.1.230.5.15.2.3.1.2
Ethernet interface enabled (enable) This field indicates whether or not the Ethernet interface should be enabled. Note that disabling the interface does not disable IP. IP may still route between its other networks,such as X.25 and Frame Relay. Default value is yes (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvElxconfInactivty 11.1.230.5.15.2.3.1.3
Inactivity test frame timer (inactivty) When this time in minutes has been exceeded with no activity on the Ethernet,a frame will be transmitted in order to check for transmit faults. Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIpconf 11.1.230.5.16.1
OBJECT IDENTIFIER    

nvIpconfMaxRec 11.1.230.5.16.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpconfNumRec 11.1.230.5.16.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpconfTable 11.1.230.5.16.1.3
ipconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIpconfEntry

nvIpconfEntry 11.1.230.5.16.1.3.1
ipconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIpconfEntry  

nvIpconfIndex 11.1.230.5.16.1.3.1.1
Index of ipconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpconfIpaddr 11.1.230.5.16.1.3.1.7
IP address of local LAN (ipaddr) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpconfMask 11.1.230.5.16.1.3.1.8
IP network mask (mask) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpconfBcastaddr 11.1.230.5.16.1.3.1.9
Outgoing broadcast IP address (bcastaddr) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpconfMtu 11.1.230.5.16.1.3.1.10
Maximum frame length on this interface (mtu) Default value is 1500.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 64..1500  

nvIpconfEncap 11.1.230.5.16.1.3.1.11
Encapsulation type Default value is v2 (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v2(1), snap(2)  

nvIpconfRoutprot 11.1.230.5.16.1.3.1.12
IP routing protocol (routprot).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), rip(9)  

nvIpconfStatus 11.1.230.5.16.1.3.1.17
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvIpstat 11.1.230.5.16.2
OBJECT IDENTIFIER    

nvIpstatMaxRec 11.1.230.5.16.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpstatNumRec 11.1.230.5.16.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpstatTable 11.1.230.5.16.2.3
ipstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIpstatEntry

nvIpstatEntry 11.1.230.5.16.2.3.1
ipstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIpstatEntry  

nvIpstatIndex 11.1.230.5.16.2.3.1.1
Index of ipstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpstatInRxs 11.1.230.5.16.2.3.1.2
Input datagrams received (InRx) The total number of input datagrams received from interfaces,including those received in error. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatInHdrErrs 11.1.230.5.16.2.3.1.3
Input datagrams with header errors (InHdrErr) The number of input datagrams discarded due to errors in their IP headers,including bad checksums,version number mismatch,other format errors,time-to-live exceeded,errors discovered in processing their IP options,etc. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatInAdrErrs 11.1.230.5.16.2.3.1.4
Input datagrams with address errors (InAdrErr) The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g.,0.0.0.0) and addresses of unsupported Classes (e.g.,Class E). For entities which are not IP Gateways and therefore do not forward datagrams,this counter includes datagrams discarded because the destination address was not a local address. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatForwDatas 11.1.230.5.16.2.3.1.5
Input datagrams forwarded (ForwData) The number of input datagrams for which this entity was not their final IP destination,as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways,this counter will include only those packets which were Source-Routed via this entity,and the Source- Route option processing was successful. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatUnKnwnPrs 11.1.230.5.16.2.3.1.6
Input datagrams with protocol errors (UnKnwnPr) The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatInDiscrds 11.1.230.5.16.2.3.1.7
Input datagrams with buffer errors (InDiscrd) The number of input IP datagrams for which no problems were encountered to prevent their continued processing,but which were discarded (e.g.,for lack of buffer space). Note that this counter does not include any datagrams discarded while waiting re-assembly. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatInDlvrs 11.1.230.5.16.2.3.1.8
Input datagrams delivered (InDlvrs) The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatOutRqsts 11.1.230.5.16.2.3.1.9
Local datagrams created (OutRqst) The total number of IP datagrams which local IP user protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ForwData. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatOutDiscrds 11.1.230.5.16.2.3.1.10
Output datagrams with buffer errors (OutDiscrd) The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination,but which were discarded (e.g.,for lack of buffer space). Note that this counter would include datagrams counted in ForwData if any such packets met this (discretionary) discard criterion. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatOutNoRts 11.1.230.5.16.2.3.1.11
Output datagrams with address errors (OutNoRts) The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ForwData which meet this `no-route' criterion. Note that this includes any datagrams which a host cannot route because all of its default gateways are down. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatReasmRqds 11.1.230.5.16.2.3.1.12
Received IP fragments (ReasmRqd) The number of IP fragments received which needed to be reassembled at this entity. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatReasmOKs 11.1.230.5.16.2.3.1.13
Datagrams successfully reassembled (ReasmOK) The number of IP datagrams successfully reassembled. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatReasmFails 11.1.230.5.16.2.3.1.14
Datagram reassembly failures (ReasmFail) The number of errors detected by the IP re-assembly algorithm (for whatever reason: timed out,errors,etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can loose track of the number of fragments by combining them as they are received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatFragOKs 11.1.230.5.16.2.3.1.15
Datagrams successfully fragmented (FragOK) The number of IP datagrams that have been successfully fragmented at this entity. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatFragFails 11.1.230.5.16.2.3.1.16
Datagrams with fragmentation errors (FragFail) The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be,e.g.,because their Don't Fragment flag was set. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatFragCrs 11.1.230.5.16.2.3.1.17
Fragments created (FragCr) The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIpstatDtreset 11.1.230.5.16.2.3.1.18
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvIpwanmap 11.1.230.5.16.3
OBJECT IDENTIFIER    

nvIpwanmapMaxRec 11.1.230.5.16.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpwanmapNumRec 11.1.230.5.16.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpwanmapTable 11.1.230.5.16.3.3
ipwanmap file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIpwanmapEntry

nvIpwanmapEntry 11.1.230.5.16.3.3.1
ipwanmap record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIpwanmapEntry  

nvIpwanmapIndex 11.1.230.5.16.3.3.1.1
Index of ipwanmap record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpwanmapIpaddr 11.1.230.5.16.3.3.1.7
IP address of local LAN (ipaddr) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpwanmapMask 11.1.230.5.16.3.3.1.8
IP network mask (mask) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpwanmapBcastcntl 11.1.230.5.16.3.3.1.9
Send internally generated broadcasts (broadcast) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvIpwanmapMtu 11.1.230.5.16.3.3.1.10
Maximum frame length on this interface (mtu) Default value is 1500.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 64..1600  

nvIpwanmapMetric 11.1.230.5.16.3.3.1.11
Cost of route (metric) Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

nvIpwanmapInactivty 11.1.230.5.16.3.3.1.12
Inactivity timer (inactivty).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIpwanmapNetaddr 11.1.230.5.16.3.3.1.13
Called address (netaddr).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpwanmapUserdat 11.1.230.5.16.3.3.1.14
User data (userdat)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvIpwanmapRevacc 11.1.230.5.16.3.3.1.15
Reverse charging accepted? (revacc) Default value is no (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvIpwanmapRevcall 11.1.230.5.16.3.3.1.16
Reverse charging flag (revacc) Default value is no (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvIpwanmapTput 11.1.230.5.16.3.3.1.17
Throughput (tput) Default value is link (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER link(1), bps75(4), bps150(5), bps300(6), bps600(7), bps1200(8), bps2400(9), bps4800(10), bps9600(11), bps19200(12), bps48000(13)  

nvIpwanmapPsize 11.1.230.5.16.3.3.1.18
Max packet size (psize) Default value is 8+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b16(5), b32(6), b64(7), b128(8), b256(9), b512(10), b1024(11), b2048(12), b4096(13)  

nvIpwanmapWsize 11.1.230.5.16.3.3.1.19
Max window size (wsize) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

nvIpwanmapCugtype 11.1.230.5.16.3.3.1.20
Closed user group type (cugtype) Default value is nocug (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nocug(1), cug(2), cugog(3), bcug(4), bcugog(5)  

nvIpwanmapCug 11.1.230.5.16.3.3.1.21
Closed user group number (cug) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIpwanmapRpoa 11.1.230.5.16.3.3.1.22
RPOA number (rpoa) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIpwanmapPvcid 11.1.230.5.16.3.3.1.23
PVC ID - zero if SVC (pvcid) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIpwanmapFrpvc 11.1.230.5.16.3.3.1.24
Frame Relay PVC record (frpvc) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvIpwanmapNetprot 11.1.230.5.16.3.3.1.25
Network protocol (netprot) Default value is x25 (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x25(1), slip(2), frelay(3), ppp(4)  

nvIpwanmapIpcp 11.1.230.5.16.3.3.1.26
IPCPCONF record number (ipcp) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIpwanmapIdnum 11.1.230.5.16.3.3.1.27
PDS 974 stringid of calling addr Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIpwanmapStatus 11.1.230.5.16.3.3.1.36
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvIproute 11.1.230.5.16.4
OBJECT IDENTIFIER    

nvIprouteMaxRec 11.1.230.5.16.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIprouteNumRec 11.1.230.5.16.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIprouteTable 11.1.230.5.16.4.3
iproute file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIprouteEntry

nvIprouteEntry 11.1.230.5.16.4.3.1
iproute record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIprouteEntry  

nvIprouteIndex 11.1.230.5.16.4.3.1.1
Index of iproute record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIprouteIpaddr 11.1.230.5.16.4.3.1.3
IP destination address (ipaddr) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIprouteMask 11.1.230.5.16.4.3.1.4
IP destination mask (ipmask) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIprouteNexthop 11.1.230.5.16.4.3.1.5
Next hop IP address (nexthop) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIprouteMetric 11.1.230.5.16.4.3.1.6
Cost of route (metric) Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

nvIprouteStatus 11.1.230.5.16.4.3.1.12
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvIprtstat 11.1.230.5.16.5
OBJECT IDENTIFIER    

nvIprtstatMaxRec 11.1.230.5.16.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIprtstatNumRec 11.1.230.5.16.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIprtstatTable 11.1.230.5.16.5.3
iprtstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIprtstatEntry

nvIprtstatEntry 11.1.230.5.16.5.3.1
iprtstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIprtstatEntry  

nvIprtstatIndex 11.1.230.5.16.5.3.1.1
Index of iprtstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIprtstatDest 11.1.230.5.16.5.3.1.2
Destination address of this route (Dest)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIprtstatInterface 11.1.230.5.16.5.3.1.3
Interface for route (Interface)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x25(1), slip(2), frelay(3), ppp(4), ether(5)  

nvIprtstatMetric 11.1.230.5.16.5.3.1.4
The routing metric for this route (Metric)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIprtstatNextHop 11.1.230.5.16.5.3.1.5
The address of the next hop (NextHop)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIprtstatType 11.1.230.5.16.5.3.1.6
The type of route (Type)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(2), invald(3), direct(4), remote(5)  

nvIprtstatProto 11.1.230.5.16.5.3.1.7
The mechanism via which this route was learned (Proto)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER local(3), icmp(5), rip(9), rad(17)  

nvIcmpstat 11.1.230.5.16.6
OBJECT IDENTIFIER    

nvIcmpstatMaxRec 11.1.230.5.16.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIcmpstatNumRec 11.1.230.5.16.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIcmpstatTable 11.1.230.5.16.6.3
icmpstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIcmpstatEntry

nvIcmpstatEntry 11.1.230.5.16.6.3.1
icmpstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIcmpstatEntry  

nvIcmpstatIndex 11.1.230.5.16.6.3.1.1
Index of icmpstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIcmpstatInMsgs 11.1.230.5.16.6.3.1.2
Input messages received (InMsgs) The total number of ICMP messages which the entity received. Note that this counter includes all those counted by InErrs. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInErrs 11.1.230.5.16.6.3.1.3
Input errors received (InErrs) The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums,bad length,etc.). Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInDstUnrs 11.1.230.5.16.6.3.1.4
Destination Unreachable messages recieved (InDstUnr) The number of ICMP Destination Unreachable messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInTmExcds 11.1.230.5.16.6.3.1.5
Time Exceeded messages received (InTmExcd) The number of ICMP Time Exceeded messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInPrmPrbs 11.1.230.5.16.6.3.1.6
Parameter Problem messages received (InPrmPrb) The number of ICMP Parameter Problem messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInSrcQus 11.1.230.5.16.6.3.1.7
Source Quench messages received (InSrcQu) The number of ICMP Source Quench messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInRdrcts 11.1.230.5.16.6.3.1.8
Redirect messages received (InRdrct) The number of ICMP Redirect messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInEchs 11.1.230.5.16.6.3.1.9
Echo Request messages received (InEch) The number of ICMP Echo (request) messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInEchRps 11.1.230.5.16.6.3.1.10
Echo Reply messages received (InEchRp) The number of ICMP Echo Reply messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInTmSts 11.1.230.5.16.6.3.1.11
Timestamp Request messages received (InTmSt) The number of ICMP Timestamp (request) messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInTmStRps 11.1.230.5.16.6.3.1.12
Timestamp Reply messages received (InTmStRp) The number of ICMP Timestamp Reply messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInAdMs 11.1.230.5.16.6.3.1.13
Address Mask Request messages received (InAdMs) The number of ICMP Address Mask Request messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatInAdMsRps 11.1.230.5.16.6.3.1.14
Address Mask Reply messages received (InAdMsRp) The number of ICMP Address Mask Reply messages received. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutMsgs 11.1.230.5.16.6.3.1.15
Output messages attempted (OutMsgs) The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by OutErrs. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutErrs 11.1.230.5.16.6.3.1.16
Output messages not sent (OutErrs) The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of errors which contribute to this counter's value. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutDstUnrs 11.1.230.5.16.6.3.1.17
Destination Unreachable messages sent (OutDstUnr) The number of ICMP Destination Unreachable messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutTmExcds 11.1.230.5.16.6.3.1.18
Time Exceeded messages sent (OutTmExcd) The number of ICMP Time Exceeded messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutPrmPrbs 11.1.230.5.16.6.3.1.19
Parameter Problem messages sent (OutPrmPrb) The number of ICMP Parameter Problem messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutSrcQus 11.1.230.5.16.6.3.1.20
Source Quench messages sent (OutSrcQu) The number of ICMP Source Quench messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutRdrcts 11.1.230.5.16.6.3.1.21
Redirect messages sent (OutRdrct) The number of ICMP Redirect messages sent. For a host,this object will always be zero,since hosts do not send redirects. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutEchs 11.1.230.5.16.6.3.1.22
Echo Request messages sent (OutEch) The number of ICMP Echo (request) messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutEchRps 11.1.230.5.16.6.3.1.23
Echo Reply messages sent (OutEchRp) The number of ICMP Echo Reply messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutTmSts 11.1.230.5.16.6.3.1.24
Timestamp Request meessages sent (OutTmSt) The number of ICMP Timestamp (request) messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutTmStRps 11.1.230.5.16.6.3.1.25
Timestamp Reply messages sent (OutTmStRp) The number of ICMP Timestamp Reply messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutAdMs 11.1.230.5.16.6.3.1.26
Address Mask Request messages sent (OutAdMs) The number of ICMP Address Mask Request messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatOutAdMsRps 11.1.230.5.16.6.3.1.27
Address Mask Reply messages sent (OutAdMsRp) The number of ICMP Address Mask Reply messages sent. Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvIcmpstatDtreset 11.1.230.5.16.6.3.1.28
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvIptrunk 11.1.230.5.16.7
OBJECT IDENTIFIER    

nvIptrunkMaxRec 11.1.230.5.16.7.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIptrunkNumRec 11.1.230.5.16.7.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIptrunkTable 11.1.230.5.16.7.3
iptrunk file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIptrunkEntry

nvIptrunkEntry 11.1.230.5.16.7.3.1
iptrunk record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIptrunkEntry  

nvIptrunkIndex 11.1.230.5.16.7.3.1.1
Index of iptrunk record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIptrunkIpaddr 11.1.230.5.16.7.3.1.3
IP destination address (ipaddr) This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIptrunkDstiptrnk 11.1.230.5.16.7.3.1.5
destenation lapb link (Dstiptrnk) Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIptrunkStatus 11.1.230.5.16.7.3.1.9
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvIpcpconf 11.1.230.5.16.8
OBJECT IDENTIFIER    

nvIpcpconfMaxRec 11.1.230.5.16.8.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpcpconfNumRec 11.1.230.5.16.8.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpcpconfTable 11.1.230.5.16.8.3
ipcpconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvIpcpconfEntry

nvIpcpconfEntry 11.1.230.5.16.8.3.1
ipcpconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvIpcpconfEntry  

nvIpcpconfIndex 11.1.230.5.16.8.3.1.1
Index of Ipcpconf record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvIpcpconfLcp 11.1.230.5.16.8.3.1.2
link control proto rec-num (lcp)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvIpcpconfCompress 11.1.230.5.16.8.3.1.3
compress flag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1)  

nvIpcpconfTest 11.1.230.5.16.8.3.1.4
test mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvIpcpconfProfile 11.1.230.5.16.8.3.1.5
Ipcp Profile Name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvIpcpconfDnsadd1 11.1.230.5.16.8.3.1.7
IP address of primary DNS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpcpconfDnsadd2 11.1.230.5.16.8.3.1.8
IP address of secondary DNS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpcpconfNbnsadd1 11.1.230.5.16.8.3.1.9
IP address of primary NBNS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpcpconfNbnsadd2 11.1.230.5.16.8.3.1.10
IP address of secondary NBNS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvIpcpconfStatus 11.1.230.5.16.8.3.1.12
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvTcpstat 11.1.230.5.17.1
OBJECT IDENTIFIER    

nvTcpstatMaxRec 11.1.230.5.17.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpstatNumRec 11.1.230.5.17.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpstatTable 11.1.230.5.17.1.3
tcpstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTcpstatEntry

nvTcpstatEntry 11.1.230.5.17.1.3.1
tcpstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTcpstatEntry  

nvTcpstatIndex 11.1.230.5.17.1.3.1.1
Index of tcpstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpstatConnattempts 11.1.230.5.17.1.3.1.2
connection attempts made.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatAccepts 11.1.230.5.17.1.3.1.3
connections accepted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatConnects 11.1.230.5.17.1.3.1.4
connections established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatDrops 11.1.230.5.17.1.3.1.5
connections dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatConndrops 11.1.230.5.17.1.3.1.6
embryonic conns dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatCloseds 11.1.230.5.17.1.3.1.7
conn closed inlc drops.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSegstimeds 11.1.230.5.17.1.3.1.8
segs where tried to get rt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRttupdateds 11.1.230.5.17.1.3.1.9
times succeeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatDelacks 11.1.230.5.17.1.3.1.10
delayed acls sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatTimeoutdrops 11.1.230.5.17.1.3.1.11
conn dropped in rxmt timeout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRexmttimeos 11.1.230.5.17.1.3.1.12
retransmit timeouts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatPersisttimeos 11.1.230.5.17.1.3.1.13
persist timeouts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatKeeptimeos 11.1.230.5.17.1.3.1.14
keepalive timeouts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatKeepprobes 11.1.230.5.17.1.3.1.15
keepalive probes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatKeepdrops 11.1.230.5.17.1.3.1.16
connections dropped in keep alive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndtotals 11.1.230.5.17.1.3.1.17
total packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndpacks 11.1.230.5.17.1.3.1.18
data packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndbytes 11.1.230.5.17.1.3.1.19
data bytes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndrexmitpacks 11.1.230.5.17.1.3.1.20
data packetes retransmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndrexmitbytes 11.1.230.5.17.1.3.1.21
data bytes retransmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndacks 11.1.230.5.17.1.3.1.22
ack only packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndprobes 11.1.230.5.17.1.3.1.23
window probes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndurgs 11.1.230.5.17.1.3.1.24
packets sent with urg only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndwinups 11.1.230.5.17.1.3.1.25
window update only packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatSndctrls 11.1.230.5.17.1.3.1.26
control SYN|FIN|RST packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvtotals 11.1.230.5.17.1.3.1.27
total packets rcvd.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvpacks 11.1.230.5.17.1.3.1.28
packets rcvd in sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvbytes 11.1.230.5.17.1.3.1.29
bytes rcvd in sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvbadsums 11.1.230.5.17.1.3.1.30
packets rcvd with cksum errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvbadoffs 11.1.230.5.17.1.3.1.31
packets rcvd with bad offset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvshorts 11.1.230.5.17.1.3.1.32
packets rcvd too short.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvduppacks 11.1.230.5.17.1.3.1.33
dup only packets rcvd.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvdupbytes 11.1.230.5.17.1.3.1.34
dup only bytes rcvd.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvpartduppacks 11.1.230.5.17.1.3.1.35
packets with some dup data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvpartdupbytes 11.1.230.5.17.1.3.1.36
dup bytes in part dup packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvoopacks 11.1.230.5.17.1.3.1.37
out of order packets rcvd.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvoobytes 11.1.230.5.17.1.3.1.38
out of order bytes rcvd.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvpackafterwins 11.1.230.5.17.1.3.1.39
packets rcvd after window.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvbyteafterwins 11.1.230.5.17.1.3.1.40
bytes rcvd after window.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvaftercloses 11.1.230.5.17.1.3.1.41
packets rcvd after close.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvwinprobes 11.1.230.5.17.1.3.1.42
rcvd window probe packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvdupacks 11.1.230.5.17.1.3.1.43
rcvd duplicate acks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvacktoomuchs 11.1.230.5.17.1.3.1.44
rcvd acks for unsent data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvackpacks 11.1.230.5.17.1.3.1.45
rcvd ack packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvackbytes 11.1.230.5.17.1.3.1.46
bytes acked by rcvd acks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatRcvwinupds 11.1.230.5.17.1.3.1.47
rcvd window update pkts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvTcpstatDtreset 11.1.230.5.17.1.3.1.48
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvTcpcnstat 11.1.230.5.17.2
OBJECT IDENTIFIER    

nvTcpcnstatMaxRec 11.1.230.5.17.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpcnstatNumRec 11.1.230.5.17.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpcnstatTable 11.1.230.5.17.2.3
tcpcnstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTcpcnstatEntry

nvTcpcnstatEntry 11.1.230.5.17.2.3.1
tcpcnstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTcpcnstatEntry  

nvTcpcnstatIndex 11.1.230.5.17.2.3.1.1
Index of tcpcnstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpcnstatState 11.1.230.5.17.2.3.1.2
Connection state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(1), closed(2), listen(3), syncsent(4), syncrcv(5), established(6), wait1(7), wait2(8), closewait(9), lastack(10), closing(11), timewait(12)  

nvTcpcnstatLocaladdr 11.1.230.5.17.2.3.1.3
Local host address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTcpcnstatLocalport 11.1.230.5.17.2.3.1.4
Local port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpcnstatRemaddr 11.1.230.5.17.2.3.1.5
Remote host address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTcpcnstatRemport 11.1.230.5.17.2.3.1.6
Remote port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpcnstatDtreset 11.1.230.5.17.2.3.1.7
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvTcprstat 11.1.230.5.17.3
OBJECT IDENTIFIER    

nvTcprstatMaxRec 11.1.230.5.17.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcprstatNumRec 11.1.230.5.17.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcprstatTable 11.1.230.5.17.3.3
tcprstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTcprstatEntry

nvTcprstatEntry 11.1.230.5.17.3.3.1
tcprstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTcprstatEntry  

nvTcprstatIndex 11.1.230.5.17.3.3.1.1
Index of tcprstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcprstatInport 11.1.230.5.17.3.3.1.2
Port number to check for traffic from IP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcprstatOutport 11.1.230.5.17.3.3.1.3
Port number to route call to if inport match.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcprstatService 11.1.230.5.17.3.3.1.4
component using the port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTcprstatDtreset 11.1.230.5.17.3.3.1.5
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvTslotconf 11.1.230.5.17.6
OBJECT IDENTIFIER    

nvTslotconfMaxRec 11.1.230.5.17.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotconfNumRec 11.1.230.5.17.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotconfTable 11.1.230.5.17.6.3
tslotconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTslotconfEntry

nvTslotconfEntry 11.1.230.5.17.6.3.1
tslotconf record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTslotconfEntry  

nvTslotconfIndex 11.1.230.5.17.6.3.1.1
Index of tslotconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotconfName 11.1.230.5.17.6.3.1.2
Name of TSLOT instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..6)  

nvTslotconfOrigans 11.1.230.5.17.6.3.1.3
Originate or answer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER originate(2), answer(3)  

nvTslotconfTcpprof 11.1.230.5.17.6.3.1.4
TCP profile name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvTslotconfReserve1 11.1.230.5.17.6.3.1.5
OBSOLETE - removed field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvTslotconfReserve2 11.1.230.5.17.6.3.1.6
OBSOLETE - removed field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvTslotconfMaxrxbuf 11.1.230.5.17.6.3.1.7
Maximum receive buffer space.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9400  

nvTslotconfEnable 11.1.230.5.17.6.3.1.8
Is this TSLOT enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvTslotconfStatus 11.1.230.5.17.6.3.1.9
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvTslotconfVersion 11.1.230.5.17.6.3.1.10
TSLOT version number to behave as.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ver0(2), ver1(3)  

nvTslotconfPeertsid 11.1.230.5.17.6.3.1.11
TSLOT ID on destination side. Only used if origans = originate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvTslotconfPeeripadr 11.1.230.5.17.6.3.1.12
IP address if destination machine. Only used if origans = originate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTslotstat 11.1.230.5.17.7
OBJECT IDENTIFIER    

nvTslotstatMaxRec 11.1.230.5.17.7.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatNumRec 11.1.230.5.17.7.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatTable 11.1.230.5.17.7.3
tslotstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTslotstatEntry

nvTslotstatEntry 11.1.230.5.17.7.3.1
tslotstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTslotstatEntry  

nvTslotstatIndex 11.1.230.5.17.7.3.1.1
Index of tslotconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatName 11.1.230.5.17.7.3.1.2
Name of TSLOT instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..6)  

nvTslotstatService 11.1.230.5.17.7.3.1.3
Connected component id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatServiceid 11.1.230.5.17.7.3.1.4
Service instance name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvTslotstatOpstate 11.1.230.5.17.7.3.1.5
TSLOT instance operational state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), idle(2), conreq(3), conwait(4), conn(5)  

nvTslotstatRemipaddr 11.1.230.5.17.7.3.1.6
Remote machine IP address. This field is a 15 byte character string in IP dotted address format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTslotstatRemtsid 11.1.230.5.17.7.3.1.7
TSLOT ID on remote machine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatTcpcn 11.1.230.5.17.7.3.1.8
TCPCNSTAT file record number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatNumcon 11.1.230.5.17.7.3.1.9
Number of TCP connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatNumfailcn 11.1.230.5.17.7.3.1.10
Number of failed attempts at TCP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatTotrxfrm 11.1.230.5.17.7.3.1.11
Total number of received frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatTottxfrm 11.1.230.5.17.7.3.1.12
Total number of transmitted frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatCurtxfrm 11.1.230.5.17.7.3.1.13
Total number of transmitted frames on current TCP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatCurrxfrm 11.1.230.5.17.7.3.1.14
Total number of received frames on current TCP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatCurdrprx 11.1.230.5.17.7.3.1.15
Number of dropped frames due to ins buffer space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTslotstatDtreset 11.1.230.5.17.7.3.1.16
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvTcpprof 11.1.230.5.17.8
OBJECT IDENTIFIER    

nvTcpprofMaxRec 11.1.230.5.17.8.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpprofNumRec 11.1.230.5.17.8.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpprofTable 11.1.230.5.17.8.3
tcpprof file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTcpprofEntry

nvTcpprofEntry 11.1.230.5.17.8.3.1
tcpprof record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTcpprofEntry  

nvTcpprofIndex 11.1.230.5.17.8.3.1.1
Index of tslotconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTcpprofProfname 11.1.230.5.17.8.3.1.2
Nmae of TCP profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvTcpprofKeepidle 11.1.230.5.17.8.3.1.3
Idle time in seconds before keepalive probe.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvTcpprofKeepprbs 11.1.230.5.17.8.3.1.4
Number of unanswered probes before reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvTcpprofKeepintvl 11.1.230.5.17.8.3.1.5
Interval in seconds between keppalive probes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvTcpprofStatus 11.1.230.5.17.8.3.1.6
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvNsockconf 11.1.230.5.17.4
OBJECT IDENTIFIER    

nvNsockconfMaxRec 11.1.230.5.17.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNsockconfNumRec 11.1.230.5.17.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNsockconfTable 11.1.230.5.17.4.3
tcpstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvNsockconfEntry

nvNsockconfEntry 11.1.230.5.17.4.3.1
tcpstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvNsockconfEntry  

nvNsockconfIndex 11.1.230.5.17.4.3.1.1
Index of nsockconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNsockconfMaxconn 11.1.230.5.17.4.3.1.2
Maximum number of connections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvNsockconfStatus 11.1.230.5.17.4.3.1.3
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

nvNsockconfDefport 11.1.230.5.17.4.3.1.4
default TCP port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvNsockmap 11.1.230.5.17.5
OBJECT IDENTIFIER    

nvNsockmapMaxRec 11.1.230.5.17.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNsockmapNumRec 11.1.230.5.17.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNsockmapTable 11.1.230.5.17.5.3
tcpstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvNsockmapEntry

nvNsockmapEntry 11.1.230.5.17.5.3.1
tcpstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvNsockmapEntry  

nvNsockmapIndex 11.1.230.5.17.5.3.1.1
Index of nsockconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvNsockmapOrigin 11.1.230.5.17.5.3.1.2
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), nbus(2)  

nvNsockmapService 11.1.230.5.17.5.3.1.3
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER any(1), telnet(2), pos(3), x25(4)  

nvNsockmapMaxsessn 11.1.230.5.17.5.3.1.4
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvNsockmapNbusport 11.1.230.5.17.5.3.1.5
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvNsockmapNetaddr 11.1.230.5.17.5.3.1.6
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvNsockmapUserdata 11.1.230.5.17.5.3.1.7
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvNsockmapTcpport 11.1.230.5.17.5.3.1.8
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvNsockmapIpaddr 11.1.230.5.17.5.3.1.9
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvNsockmapTcpmsglen 11.1.230.5.17.5.3.1.11
type of header for tcp message
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), vap(2), bin2(3), bin3(4), bin4(5)  

nvNsockmapStatus 11.1.230.5.17.5.3.1.10
nsockconf record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvFtpconf 11.1.230.5.18.1
OBJECT IDENTIFIER    

nvFtpconfMaxRec 11.1.230.5.18.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFtpconfNumRec 11.1.230.5.18.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFtpconfTable 11.1.230.5.18.1.3
ftpconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvFtpconfEntry

nvFtpconfEntry 11.1.230.5.18.1.3.1
ftpconf record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvFtpconfEntry  

nvFtpconfIndex 11.1.230.5.18.1.3.1.1
Index of ftpconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFtpconfReqaddr 11.1.230.5.18.1.3.1.2
FTPD remote client IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvFtpconfUsername 11.1.230.5.18.1.3.1.3
FTPD username.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvFtpconfPassword 11.1.230.5.18.1.3.1.4
FTPD user password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvFtpconfTimeout 11.1.230.5.18.1.3.1.5
FTPD user inactivity timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvFtpconfStatus 11.1.230.5.18.1.3.1.10
Operation status. Add the record to the table (valid) or delete the record from the table (invalid). Reqaddr MUST be set to a valid value before adding new record (setting Status to valid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvFtpstat 11.1.230.5.18.2
OBJECT IDENTIFIER    

nvFtpstatIndex 11.1.230.5.18.2.1
Index of ftpconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvFtpstatServaddr 11.1.230.5.18.2.2
server FTP host IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvFtpstatNumreqs 11.1.230.5.18.2.3
number of connection requested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatConnects 11.1.230.5.18.2.4
number of successful connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatConnfails 11.1.230.5.18.2.5
number of connect request failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatTotalfirvs 11.1.230.5.18.2.6
number of files server received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatTotalfisds 11.1.230.5.18.2.7
number of files server sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatTotalkbyrvs 11.1.230.5.18.2.8
number of Kbytes server received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatTotalkbysds 11.1.230.5.18.2.9
number of Kbytes server sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatClientaddr 11.1.230.5.18.2.10
client FTP host IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvFtpstatCurrstat 11.1.230.5.18.2.11
current FTPD status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER closed(1), copen(2), bothopen(3)  

nvFtpstatCommstat 11.1.230.5.18.2.12
last command status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), cmdok(2), cmdfail(3), cmderr(4)  

nvFtpstatTotalsucs 11.1.230.5.18.2.13
total number of commands executed successfully.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatTotalfals 11.1.230.5.18.2.14
total number of commands executed with failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatTotalerrs 11.1.230.5.18.2.15
total number of unsupported commands.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatCurrfirecs 11.1.230.5.18.2.16
total number of files current user received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatCurrfisnds 11.1.230.5.18.2.17
total number of files current user sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatCurrkbyrvs 11.1.230.5.18.2.18
total number of Kbytes current user server sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatCurrkbysds 11.1.230.5.18.2.19
total number of Kbytes current user server received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvFtpstatDtreset 11.1.230.5.18.2.20
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvTnconf 11.1.230.5.20.1
OBJECT IDENTIFIER    

nvTnconfMaxRec 11.1.230.5.20.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnconfNumRec 11.1.230.5.20.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnconfTable 11.1.230.5.20.1.3
Nevada Telnet config file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTnconfEntry

nvTnconfEntry 11.1.230.5.20.1.3.1
Nevada node Telnet record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTnconfEntry  

nvTnconfIndex 11.1.230.5.20.1.3.1.1
Index of Telenet conf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnconfNumSess 11.1.230.5.20.1.3.1.2
number of simultaneous sessions
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvTnconfDeftnclass 11.1.230.5.20.1.3.1.3
Default telnet class
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTnconfDefiticlass 11.1.230.5.20.1.3.1.4
Default iti class
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTnconfDefminbspace 11.1.230.5.20.1.3.1.5
number of simultaneous sessions
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvTnconfDefmaxbspace 11.1.230.5.20.1.3.1.6
number of simultaneous sessions
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvTnclass 11.1.230.5.20.2
OBJECT IDENTIFIER    

nvTnclassMaxRec 11.1.230.5.20.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnclassNumRec 11.1.230.5.20.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnclassTable 11.1.230.5.20.2.3
Nevada Telnet class file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTnclassEntry

nvTnclassEntry 11.1.230.5.20.2.3.1
Nevada node Telnet record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTnclassEntry  

nvTnclassIndex 11.1.230.5.20.2.3.1.1
Index of Telenet class record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnclassClassname 11.1.230.5.20.2.3.1.2
Telnet classname
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTnclassAobreak 11.1.230.5.20.2.3.1.4
Telnet abort cmd issues break
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvTnclassIpcmd 11.1.230.5.20.2.3.1.5
Telnet interrupt process cmd
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvTnclassGoahead 11.1.230.5.20.2.3.1.7
Telnet suppress/send Go Ahead cmd
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER send(1), suppress(2)  

nvTnclassStatus 11.1.230.5.20.2.3.1.9
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvTnmap 11.1.230.5.20.3
OBJECT IDENTIFIER    

nvTnmapMaxRec 11.1.230.5.20.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnmapNumRec 11.1.230.5.20.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnmapTable 11.1.230.5.20.3.3
Nevada Telnet map file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTnmapEntry

nvTnmapEntry 11.1.230.5.20.3.3.1
Nevada node Telnet map record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTnmapEntry  

nvTnmapIndex 11.1.230.5.20.3.3.1.1
Index of Telenet map record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnmapPortnum 11.1.230.5.20.3.3.1.2
Telnet portnumber
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvTnmapTnclass 11.1.230.5.20.3.3.1.3
Telnet classname
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTnmapIticlass 11.1.230.5.20.3.3.1.4
Telnet iti classname
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvTnmapStatus 11.1.230.5.20.3.3.1.5
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvTnstat 11.1.230.5.20.4
OBJECT IDENTIFIER    

nvTnstatMaxRec 11.1.230.5.20.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnstatNumRec 11.1.230.5.20.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnstatTable 11.1.230.5.20.4.3
Nevada Telnet stat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTnstatEntry

nvTnstatEntry 11.1.230.5.20.4.3.1
Nevada node Telnet stat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTnstatEntry  

nvTnstatIndex 11.1.230.5.20.4.3.1.1
Index of Telenet stat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnstatPortnum 11.1.230.5.20.4.3.1.2
Telnet portnumber in use
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTnstatStatus 11.1.230.5.20.4.3.1.3
Telnet call status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disconnected(1), connecting(2), connected(3)  

nvTnstatMode 11.1.230.5.20.4.3.1.4
Telnet mode in use
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), linemode(2), binary(3)  

nvTnstatLastCmd 11.1.230.5.20.4.3.1.5
Telnet last cmd received
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvTnstatOptions 11.1.230.5.20.4.3.1.6
Telnet active options
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

nvTnstatClientAddr 11.1.230.5.20.4.3.1.7
Address of the Client.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvTncconf 11.1.230.5.20.5
OBJECT IDENTIFIER    

nvTncconfMaxRec 11.1.230.5.20.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncconfNumRec 11.1.230.5.20.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncconfTable 11.1.230.5.20.5.3
Nevada Telnet cconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTncconfEntry

nvTncconfEntry 11.1.230.5.20.5.3.1
nevada node Tncconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTncconfEntry  

nvTncconfIndex 11.1.230.5.20.5.3.1.1
Index of Telnet Client record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncconfNumSess 11.1.230.5.20.5.3.1.2
number of simultaneous sessions (numSess)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncconfX3parms 11.1.230.5.20.5.3.1.3
string of X.3 params to send at start (x3parms)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfSetact 11.1.230.5.20.5.3.1.4
allow user to perform set actions (setact)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(1)  

nvTncconfIdletim 11.1.230.5.20.5.3.1.5
forwarding timer used in character at a time (idletim)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfEscape 11.1.230.5.20.5.3.1.6
decimal number of character to use for escape (escape)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfEcho 11.1.230.5.20.5.3.1.7
decimal number of character to use for echo (echo)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfInterrupt 11.1.230.5.20.5.3.1.8
decimal number of character to use for interrupt (interrupt)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfQuit 11.1.230.5.20.5.3.1.9
decimal number of character to use for quit (quit)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfFout 11.1.230.5.20.5.3.1.10
decimal number of character to use for flushoutput (fout)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfErase 11.1.230.5.20.5.3.1.11
decimal number of character to use for erase (erase)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfKill 11.1.230.5.20.5.3.1.12
decimal number of character to use for kill (kill)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfAyt 11.1.230.5.20.5.3.1.13
decimal number of character to use for ayt (ayt)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfSuspend 11.1.230.5.20.5.3.1.14
decimal number of character to use for suspend (suspend)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncconfDnsaddr 11.1.230.5.20.5.3.1.15
Dnsaddr
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTncconfStatus 11.1.230.5.20.5.3.1.16
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvTncmap 11.1.230.5.20.6
OBJECT IDENTIFIER    

nvTncmapMaxRec 11.1.230.5.20.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncmapNumRec 11.1.230.5.20.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncmapTable 11.1.230.5.20.6.3
Nevada Telnet cstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTncmapEntry

nvTncmapEntry 11.1.230.5.20.6.3.1
Nevada node Telnet cstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTncmapEntry  

nvTncmapIndex 11.1.230.5.20.6.3.1.1
Index of Telnet Client map record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncmapNetad 11.1.230.5.20.6.3.1.2
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTncmapUsdata 11.1.230.5.20.6.3.1.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTncmapIpaddr 11.1.230.5.20.6.3.1.4
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTncmapTcppn 11.1.230.5.20.6.3.1.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvTncmapX3parms 11.1.230.5.20.6.3.1.6
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvTncmapMode 11.1.230.5.20.6.3.1.7
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER asci(1), binary(2)  

nvTncmapSecure 11.1.230.5.20.6.3.1.9
security opreation enabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvTncmapStatus 11.1.230.5.20.6.3.1.8
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvTncstat 11.1.230.5.20.7
OBJECT IDENTIFIER    

nvTncstatMaxRec 11.1.230.5.20.7.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncstatNumRec 11.1.230.5.20.7.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncstatTable 11.1.230.5.20.7.3
Nevada Telnet cstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTncstatEntry

nvTncstatEntry 11.1.230.5.20.7.3.1
Nevada node Telnet cstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTncstatEntry  

nvTncstatIndex 11.1.230.5.20.7.3.1.1
Index of Telnet Client stat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncstatSessnum 11.1.230.5.20.7.3.1.2
the number of the session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncstatStatus 11.1.230.5.20.7.3.1.3
Call status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER discon(1), cnectg(2), cnetctd(3), cmd(4)  

nvTncstatDnsidx 11.1.230.5.20.7.3.1.4
dnsindex
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncstatCalladdr 11.1.230.5.20.7.3.1.5
x121 address calling TELNET Client
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTncstatCalldata 11.1.230.5.20.7.3.1.6
call user data
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTncstatIpaddr 11.1.230.5.20.7.3.1.7
ip address connected to
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvTncstatPortnum 11.1.230.5.20.7.3.1.8
Port number connected to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTncstatMode 11.1.230.5.20.7.3.1.9
mode in use
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), linemode(2), binary(3)  

nvTncstatX29err 11.1.230.5.20.7.3.1.10
last X29 error rcvd from 3XPAD
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadconf 11.1.230.5.40.1
OBJECT IDENTIFIER    

nvRadconfMaxRec 11.1.230.5.40.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadconfNumRec 11.1.230.5.40.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadconfTable 11.1.230.5.40.1.3
radconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRadconfEntry

nvRadconfEntry 11.1.230.5.40.1.3.1
radconf record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRadconfEntry  

nvRadconfIndex 11.1.230.5.40.1.3.1.1
Index of radconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadconfName 11.1.230.5.40.1.3.1.2
Nevada name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvRadconfSecret 11.1.230.5.40.1.3.1.3
secret for accounting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadconfN1 11.1.230.5.40.1.3.1.4
retry counter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvRadconfT1 11.1.230.5.40.1.3.1.5
times between attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvRadconfAcct 11.1.230.5.40.1.3.1.6
radius accounting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), adapt(2), enable(3)  

nvRadconfNumdigits 11.1.230.5.40.1.3.1.7
trailing port digits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvRadconfAuth1 11.1.230.5.40.1.3.1.8
IP address primary auth server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadconfAuth2 11.1.230.5.40.1.3.1.10
IP address secondary auth server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadconfAuth3 11.1.230.5.40.1.3.1.12
IP address tertiary auth server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadconfAcct1 11.1.230.5.40.1.3.1.14
IP address primary accounting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadconfAcct2 11.1.230.5.40.1.3.1.16
IP address secondary accounting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadconfAcct3 11.1.230.5.40.1.3.1.18
IP address tertiary accounting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadconfAcctauth 11.1.230.5.40.1.3.1.20
authorizarion encoding.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER secret(1), zero(2)  

nvRadconfAuth1port 11.1.230.5.40.1.3.1.21
authserver port1 .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRadconfAuth2port 11.1.230.5.40.1.3.1.22
authserver port2 .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRadconfAuth3port 11.1.230.5.40.1.3.1.23
authserver port3 .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRadconfAcct1port 11.1.230.5.40.1.3.1.24
account server port1 .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRadconfAcct2port 11.1.230.5.40.1.3.1.25
account server port2 .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRadconfAcct3port 11.1.230.5.40.1.3.1.26
account server port3 .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRadconfAttrchk 11.1.230.5.40.1.3.1.27
Strict attribute checking.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvRadconfDnsatt1 11.1.230.5.40.1.3.1.28
attribute code for primary DNS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRadconfDnsatt2 11.1.230.5.40.1.3.1.29
attribute code for secondary DNS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRadconfNbnsatt1 11.1.230.5.40.1.3.1.30
attribute code for primary NBNS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRadconfStatus 11.1.230.5.40.1.3.1.31
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvRadconfNbnsatt2 11.1.230.5.40.1.3.1.32
attribute code for secondary NBNS server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRaduser 11.1.230.5.40.2
OBJECT IDENTIFIER    

nvRaduserMaxRec 11.1.230.5.40.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRaduserNumRec 11.1.230.5.40.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRaduserTable 11.1.230.5.40.2.3
raduser file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRaduserEntry

nvRaduserEntry 11.1.230.5.40.2.3.1
raduser record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRaduserEntry  

nvRaduserIndex 11.1.230.5.40.2.3.1.1
Index of raduser record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRaduserUsername 11.1.230.5.40.2.3.1.2
user name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRaduserPasswd 11.1.230.5.40.2.3.1.3
user password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRaduserRespmsg 11.1.230.5.40.2.3.1.4
stringid of response message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvRaduserStatus 11.1.230.5.40.2.3.1.15
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvRadcstat 11.1.230.5.40.3
OBJECT IDENTIFIER    

nvRadcstatMaxRec 11.1.230.5.40.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadcstatNumRec 11.1.230.5.40.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadcstatTable 11.1.230.5.40.3.3
radcstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRadcstatEntry

nvRadcstatEntry 11.1.230.5.40.3.3.1
radcstat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRadcstatEntry  

nvRadcstatIndex 11.1.230.5.40.3.3.1.1
Index of radcstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadcstatRadAdminS 11.1.230.5.40.3.3.1.2
radius admin status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

nvRadcstatRadcOperS 11.1.230.5.40.3.3.1.3
radius operation status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

nvRadcstatNAuths 11.1.230.5.40.3.3.1.4
number of auth attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAuthLocl 11.1.230.5.40.3.3.1.5
number of local authorizations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAuthLost 11.1.230.5.40.3.3.1.6
number of authorization lost.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAuthRtry 11.1.230.5.40.3.3.1.7
number of authentication retr.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAuth1Acc 11.1.230.5.40.3.3.1.8
number of auth accepts by auth1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAuth1Rej 11.1.230.5.40.3.3.1.9
number of auth rejects by auth1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAuth2Acc 11.1.230.5.40.3.3.1.10
number of auth accepts by auth2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAuth2Rej 11.1.230.5.40.3.3.1.11
number of auth rejects by auth2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAuth3Acc 11.1.230.5.40.3.3.1.12
number of auth accepts by auth3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAuth3Rej 11.1.230.5.40.3.3.1.13
number of auth rejects by auth3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAcct 11.1.230.5.40.3.3.1.14
number of accounting msgs attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAcctLost 11.1.230.5.40.3.3.1.15
number of accounting records lost.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAcctRtry 11.1.230.5.40.3.3.1.16
number of accounting msgs retry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAcct1 11.1.230.5.40.3.3.1.17
number of accounting msgs acct1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAcct2 11.1.230.5.40.3.3.1.18
number of accounting msgs acct2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNAcct3 11.1.230.5.40.3.3.1.19
number of accounting msgs acct3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatNSilent 11.1.230.5.40.3.3.1.20
num of silent discards
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadcstatDtreset 11.1.230.5.40.3.3.1.21
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvRadustat 11.1.230.5.40.4
OBJECT IDENTIFIER    

nvRadustatMaxRec 11.1.230.5.40.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadustatNumRec 11.1.230.5.40.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadustatTable 11.1.230.5.40.4.3
radustat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRadustatEntry

nvRadustatEntry 11.1.230.5.40.4.3.1
radustat record, indexed by record number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRadustatEntry  

nvRadustatIndex 11.1.230.5.40.4.3.1.1
Index of radustat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadustatRaduOperS 11.1.230.5.40.4.3.1.2
User operation/session status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), open(2), ready(3), waiting(4), active(5), astart(6), astop(7)  

nvRadustatSessionId 11.1.230.5.40.4.3.1.3
accounting session-id name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..18)  

nvRadustatUserId 11.1.230.5.40.4.3.1.4
user/host name of requestor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvRadustatNasPort 11.1.230.5.40.4.3.1.5
Called address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadustatNasIpAddr 11.1.230.5.40.4.3.1.6
NAS IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadustatFrmIpaddr 11.1.230.5.40.4.3.1.7
Framed IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadustatFrmIpMask 11.1.230.5.40.4.3.1.8
Framed IP mask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvRadustatState 11.1.230.5.40.4.3.1.13
state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvRadustatClass 11.1.230.5.40.4.3.1.14
class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvRadustatSType 11.1.230.5.40.4.3.1.15
Service type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), login(2), framed(3), callBackLogin(4), callBackFramed(5), outboundUser(6), adminUser(7), execUser(8), authOnly(9)  

nvRadustatFrmProto 11.1.230.5.40.4.3.1.17
Framed protocol type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSet(1), ppp(2), slip(3)  

nvRadustatFrmRting 11.1.230.5.40.4.3.1.18
Framed routing attribute type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), sendRtPkt(2), listenRtPkt(3), sendListen(4)  

nvRadustatSTime 11.1.230.5.40.4.3.1.19
Seconds the call was active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadustatFrmMtu 11.1.230.5.40.4.3.1.20
Framed mtu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadustatFrmRt 11.1.230.5.40.4.3.1.21
Framed route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadustatSTimeout 11.1.230.5.40.4.3.1.22
Session timeout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadustatITimeout 11.1.230.5.40.4.3.1.23
Idle timeout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadustatDFilter 11.1.230.5.40.4.3.1.24
Data filters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRadustatReqId 11.1.230.5.40.4.3.1.25
Request ID of outstanding radius msgs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvRadustatDtreset 11.1.230.5.40.4.3.1.26
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvSnmpconf 11.1.230.5.45.1
OBJECT IDENTIFIER    

nvSnmpconfMaxRec 11.1.230.5.45.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSnmpconfNumRec 11.1.230.5.45.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSnmpconfTable 11.1.230.5.45.1.3
Snmpconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvSnmpconfEntry

nvSnmpconfEntry 11.1.230.5.45.1.3.1
Snmpconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvSnmpconfEntry  

nvSnmpconfIndex 11.1.230.5.45.1.3.1.1
Index of nvSnmpconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSnmpconflocation 11.1.230.5.45.1.3.1.2
Location
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvSnmpconfcontact 11.1.230.5.45.1.3.1.3
contact
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvSnmpconfsysname 11.1.230.5.45.1.3.1.4
sysname
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvSnmpconfauthen 11.1.230.5.45.1.3.1.5
authentication trap yes(1)/no(2)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvSnmpconfstatus 11.1.230.5.45.1.3.1.6
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvSnmpmgr 11.1.230.5.45.2
OBJECT IDENTIFIER    

nvSnmpmgrMaxRec 11.1.230.5.45.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSnmpmgrNumRec 11.1.230.5.45.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSnmpmgrTable 11.1.230.5.45.2.3
Snmpmgr file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvSnmpmgrEntry

nvSnmpmgrEntry 11.1.230.5.45.2.3.1
Snmpmgr record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvSnmpmgrEntry  

nvSnmpmgrIndex 11.1.230.5.45.2.3.1.1
Index of nvSnmpmgr record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvSnmpmgrIp 11.1.230.5.45.2.3.1.2
IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvSnmpmgrComm 11.1.230.5.45.2.3.1.3
community
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

nvSnmpmgrAccPriv 11.1.230.5.45.2.3.1.4
Access priv
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ro(1), rw(2), wo(3)  

nvSnmpmgrSndTrap 11.1.230.5.45.2.3.1.5
Send trap
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

nvSnmpmgrstatus 11.1.230.5.45.2.3.1.6
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPosprof 11.1.230.5.66.1
OBJECT IDENTIFIER    

nvPosprofMaxRec 11.1.230.5.66.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosprofNumRec 11.1.230.5.66.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosprofTable 11.1.230.5.66.1.3
NEvada node posprof file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPosprofEntry

nvPosprofEntry 11.1.230.5.66.1.3.1
Nevada node posprof record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPosprofEntry  

nvPosprofIndex 11.1.230.5.66.1.3.1.1
Index of nevada posprof record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosprofName 11.1.230.5.66.1.3.1.2
Profile Name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPosprofSize 11.1.230.5.66.1.3.1.3
max bytes per frame Default value is 128 (0+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b128(1), b256(2), b512(3), b1024(4), b2048(5), b4096(6)  

nvPosprofNumchan 11.1.230.5.66.1.3.1.4
max number of channels Default value is 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvPosprofPermchan 11.1.230.5.66.1.3.1.6
min number of channels
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvPosprofDirection 11.1.230.5.66.1.3.1.7
up or down? Default value is dnlink (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER uplink(1), dnlink(2), nmslink(3)  

nvPosprofProtocol 11.1.230.5.66.1.3.1.8
protocol on port Default value is visa.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sdlc(1), x25(2), visa(3), tcp(4), spdh(5), dfono(6), dtfspc(7), dtfgen(8)  

nvPosprofAddrtype 11.1.230.5.66.1.3.1.9
address header Default value is tpdu.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), tpdu(2), fast3(3), fast6(4)  

nvPosprofUserdata 11.1.230.5.66.1.3.1.10
call user data
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..12)  

nvPosprofMode 11.1.230.5.66.1.3.1.11
Mode of operation. Default is 7E1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER m8n1(1), m7e1(2), m7o1(3), m7m1(4), m7s1(5)  

nvPosprofIdletime 11.1.230.5.66.1.3.1.12
max num secs channel can remain idle
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvPosprofRouting 11.1.230.5.66.1.3.1.13
look at data or tpdu? Default value is tpdurtg (1+1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER datartg(1), tpdurtg(2)  

nvPosprofTranslate 11.1.230.5.66.1.3.1.14
message translation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), ascii(2), ebcdic(3), fastpos(4)  

nvPosprofTpduaddr 11.1.230.5.66.1.3.1.15
use this when tpdu not supplied (but required).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvPosprofEftrspto 11.1.230.5.66.1.3.1.16
number of seconds before addr table entry cleared Default value is 300.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvPosprofRetrytim 11.1.230.5.66.1.3.1.17
retry timer Default value is 100.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvPosprofNretry 11.1.230.5.66.1.3.1.18
max retry attempts Default value is 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvPosprofActsupl 11.1.230.5.66.1.3.1.19
Action after responce is sent to terminal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), sndnak(2), reverse(3), muzo(4), closelcn(5), fdr(6)  

nvPosprofResptim 11.1.230.5.66.1.3.1.20
host response timer Default value is 100.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvPosprofPolltim 11.1.230.5.66.1.3.1.21
poll timer Default value is 5.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvPosprofPolladdr 11.1.230.5.66.1.3.1.22
base poll address,hex
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvPosprofSkip 11.1.230.5.66.1.3.1.23
number of cycles to skip for non-func device Default value is 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvPosprofTcpmsglen 11.1.230.5.66.1.3.1.24
TCP msg header format. Default value is bin4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), vap(2), bin2(3), bin3(4), bin4(5)  

nvPosprofPortname 11.1.230.5.66.1.3.1.25
Name of physical port or Device Usage Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvPosprofRsrcpool 11.1.230.5.66.1.3.1.26
Resource Pool Name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvPosprofStatus 11.1.230.5.66.1.3.1.27
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPosconf 11.1.230.5.66.2
OBJECT IDENTIFIER    

nvPosconfMaxRec 11.1.230.5.66.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosconfNumRec 11.1.230.5.66.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosconfTable 11.1.230.5.66.2.3
NEvada node posconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPosconfEntry

nvPosconfEntry 11.1.230.5.66.2.3.1
Nevada node posprof record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPosconfEntry  

nvPosconfIndex 11.1.230.5.66.2.3.1.1
Index of nevada posconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosconfName 11.1.230.5.66.2.3.1.2
either POS# or X.121 Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPosconfEnable 11.1.230.5.66.2.3.1.3
Enabled or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvPosconfProfile 11.1.230.5.66.2.3.1.4
Name of profile (in posprof) being used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPosconfStatus 11.1.230.5.66.2.3.1.5
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPosmsgmap 11.1.230.5.66.3
OBJECT IDENTIFIER    

nvPosmsgmapMaxRec 11.1.230.5.66.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosmsgmapNumRec 11.1.230.5.66.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosmsgmapTable 11.1.230.5.66.3.3
Nevada node posmsgmap file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPosmsgmapEntry

nvPosmsgmapEntry 11.1.230.5.66.3.3.1
nevada node posmsgmap record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPosmsgmapEntry  

nvPosmsgmapIndex 11.1.230.5.66.3.3.1.1
Index of nevada posmsgmap record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosmsgmapPattern 11.1.230.5.66.3.3.1.2
pointer to pattern in string storage
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvPosmsgmapDest 11.1.230.5.66.3.3.1.3
port/link or X.121 address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPosmsgmapStatus 11.1.230.5.66.3.3.1.4
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPosniimap 11.1.230.5.66.4
OBJECT IDENTIFIER    

nvPosniimapMaxRec 11.1.230.5.66.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosniimapNumRec 11.1.230.5.66.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosniimapTable 11.1.230.5.66.4.3
nevada node posniimap file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPosniimapEntry

nvPosniimapEntry 11.1.230.5.66.4.3.1
Nevada node posniimap record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPosniimapEntry  

nvPosniimapIndex 11.1.230.5.66.4.3.1.1
Index of nevada posniimap record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosniimapTpduaddr 11.1.230.5.66.4.3.1.2
NII value to match
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvPosniimapDest 11.1.230.5.66.4.3.1.3
port/link or X.121 address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPosniimapStatus 11.1.230.5.66.4.3.1.4
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPosnmsmap 11.1.230.5.66.5
OBJECT IDENTIFIER    

nvPosnmsmapMaxRec 11.1.230.5.66.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosnmsmapNumRec 11.1.230.5.66.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosnmsmapTable 11.1.230.5.66.5.3
nevada node posnmsmap file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPosnmsmapEntry

nvPosnmsmapEntry 11.1.230.5.66.5.3.1
nevada node posnmsmap record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPosnmsmapEntry  

nvPosnmsmapIndex 11.1.230.5.66.5.3.1.1
Index of nevada posnmsmap record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosnmsmapNmsid 11.1.230.5.66.5.3.1.2
two digit hex NMS ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvPosnmsmapDest 11.1.230.5.66.5.3.1.3
port/link or X.121 address
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPosnmsmapStatus 11.1.230.5.66.5.3.1.4
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPosiso 11.1.230.5.66.6
OBJECT IDENTIFIER    

nvPosisoMaxRec 11.1.230.5.66.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosisoNumRec 11.1.230.5.66.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosisoTable 11.1.230.5.66.6.3
nevada node posiso file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPosisoEntry

nvPosisoEntry 11.1.230.5.66.6.3.1
navada node posiso record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPosisoEntry  

nvPosisoIndex 11.1.230.5.66.6.3.1.1
Index of Nevada posiso record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosisoName 11.1.230.5.66.6.3.1.2
used to identify record
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPosisoContrec 11.1.230.5.66.6.3.1.3
pointer to continuation record Default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvPosisoField2 11.1.230.5.66.6.3.1.4
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField3 11.1.230.5.66.6.3.1.5
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField4 11.1.230.5.66.6.3.1.6
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField5 11.1.230.5.66.6.3.1.7
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField6 11.1.230.5.66.6.3.1.8
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField7 11.1.230.5.66.6.3.1.9
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField8 11.1.230.5.66.6.3.1.10
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField9 11.1.230.5.66.6.3.1.11
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField10 11.1.230.5.66.6.3.1.12
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField11 11.1.230.5.66.6.3.1.13
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField12 11.1.230.5.66.6.3.1.14
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField13 11.1.230.5.66.6.3.1.15
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField14 11.1.230.5.66.6.3.1.16
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField15 11.1.230.5.66.6.3.1.17
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField16 11.1.230.5.66.6.3.1.18
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField17 11.1.230.5.66.6.3.1.19
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField18 11.1.230.5.66.6.3.1.20
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField19 11.1.230.5.66.6.3.1.21
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField20 11.1.230.5.66.6.3.1.22
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField21 11.1.230.5.66.6.3.1.23
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField22 11.1.230.5.66.6.3.1.24
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField23 11.1.230.5.66.6.3.1.25
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField24 11.1.230.5.66.6.3.1.26
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField25 11.1.230.5.66.6.3.1.27
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField26 11.1.230.5.66.6.3.1.28
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField27 11.1.230.5.66.6.3.1.29
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField28 11.1.230.5.66.6.3.1.30
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField29 11.1.230.5.66.6.3.1.31
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField30 11.1.230.5.66.6.3.1.32
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField31 11.1.230.5.66.6.3.1.33
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField32 11.1.230.5.66.6.3.1.34
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField33 11.1.230.5.66.6.3.1.35
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField34 11.1.230.5.66.6.3.1.36
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField35 11.1.230.5.66.6.3.1.37
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField36 11.1.230.5.66.6.3.1.38
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField37 11.1.230.5.66.6.3.1.39
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField38 11.1.230.5.66.6.3.1.40
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField39 11.1.230.5.66.6.3.1.41
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField40 11.1.230.5.66.6.3.1.42
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField41 11.1.230.5.66.6.3.1.43
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField42 11.1.230.5.66.6.3.1.44
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField43 11.1.230.5.66.6.3.1.45
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField44 11.1.230.5.66.6.3.1.46
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField45 11.1.230.5.66.6.3.1.47
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField46 11.1.230.5.66.6.3.1.48
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField47 11.1.230.5.66.6.3.1.49
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField48 11.1.230.5.66.6.3.1.50
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField49 11.1.230.5.66.6.3.1.51
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField50 11.1.230.5.66.6.3.1.52
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField51 11.1.230.5.66.6.3.1.53
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField52 11.1.230.5.66.6.3.1.54
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField53 11.1.230.5.66.6.3.1.55
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField54 11.1.230.5.66.6.3.1.56
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField55 11.1.230.5.66.6.3.1.57
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField56 11.1.230.5.66.6.3.1.58
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField57 11.1.230.5.66.6.3.1.59
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField58 11.1.230.5.66.6.3.1.60
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField59 11.1.230.5.66.6.3.1.61
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField60 11.1.230.5.66.6.3.1.62
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField61 11.1.230.5.66.6.3.1.63
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField62 11.1.230.5.66.6.3.1.64
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField63 11.1.230.5.66.6.3.1.65
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoField64 11.1.230.5.66.6.3.1.66
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvIsoType  

nvPosisoStatus 11.1.230.5.66.6.3.1.67
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPosvisa 11.1.230.5.66.7
OBJECT IDENTIFIER    

nvPosvisaMaxRec 11.1.230.5.66.7.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosvisaNumRec 11.1.230.5.66.7.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosvisaTable 11.1.230.5.66.7.3
Nevada node posvisa file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPosvisaEntry

nvPosvisaEntry 11.1.230.5.66.7.3.1
Nevada node posvisa record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPosvisaEntry  

nvPosvisaIndex 11.1.230.5.66.7.3.1.1
Index of Nevada posvisa record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosvisaName 11.1.230.5.66.7.3.1.2
used to identify record
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPosvisaField1 11.1.230.5.66.7.3.1.3
description of a single field
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField2 11.1.230.5.66.7.3.1.4
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField3 11.1.230.5.66.7.3.1.5
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField4 11.1.230.5.66.7.3.1.6
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField5 11.1.230.5.66.7.3.1.7
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField6 11.1.230.5.66.7.3.1.8
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField7 11.1.230.5.66.7.3.1.9
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField8 11.1.230.5.66.7.3.1.10
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField9 11.1.230.5.66.7.3.1.11
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField10 11.1.230.5.66.7.3.1.12
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField11 11.1.230.5.66.7.3.1.13
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField12 11.1.230.5.66.7.3.1.14
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField13 11.1.230.5.66.7.3.1.15
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField14 11.1.230.5.66.7.3.1.16
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField15 11.1.230.5.66.7.3.1.17
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField16 11.1.230.5.66.7.3.1.18
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField17 11.1.230.5.66.7.3.1.19
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField18 11.1.230.5.66.7.3.1.20
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField19 11.1.230.5.66.7.3.1.21
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaField20 11.1.230.5.66.7.3.1.22
same as field1
Status: mandatory Access: read-write
OBJECT-TYPE    
  NvVisaType  

nvPosvisaStatus 11.1.230.5.66.7.3.1.23
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvPosstat 11.1.230.5.66.8
OBJECT IDENTIFIER    

nvPosstatMaxRec 11.1.230.5.66.8.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNumRec 11.1.230.5.66.8.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatTable 11.1.230.5.66.8.3
Nevada node posstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvPosstatEntry

nvPosstatEntry 11.1.230.5.66.8.3.1
Nevada node posstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvPosstatEntry  

nvPosstatIndex 11.1.230.5.66.8.3.1.1
Index of Nevada posstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatName 11.1.230.5.66.8.3.1.2
port/link or X.121 address (matches posconf)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvPosstatNactivchn 11.1.230.5.66.8.3.1.3
number of active channels Initial status is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatProtocol 11.1.230.5.66.8.3.1.4
protocol on port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sdlc(1), x25(2), visa(3), tcp(4), spdh(5), dfono(6), dtfspc(7), dtfgen(8)  

nvPosstatNumcalls 11.1.230.5.66.8.3.1.5
number of calls Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNfailcall 11.1.230.5.66.8.3.1.6
number of failed calls Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNumimsgs 11.1.230.5.66.8.3.1.7
number of messages from device Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNumomsgs 11.1.230.5.66.8.3.1.8
number of messages to device Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatEftreqs 11.1.230.5.66.8.3.1.9
number of EFT requests Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatEftrsps 11.1.230.5.66.8.3.1.10
number of EFT responses Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNmsreqs 11.1.230.5.66.8.3.1.11
number of NMS requests Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNmsrsps 11.1.230.5.66.8.3.1.12
number of NMS responses Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNodatart 11.1.230.5.66.8.3.1.13
EFT reqs discarded becaues msg switch could find route Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNotpdurt 11.1.230.5.66.8.3.1.14
EFT reqs discarded because no match to posniimap entry Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatInvrqtpdu 11.1.230.5.66.8.3.1.15
EFT reqs discarded because of bad TPDUs Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNousdest 11.1.230.5.66.8.3.1.16
EFT reqs discarded because destination couldn't be matched Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatQueued 11.1.230.5.66.8.3.1.17
EFT reqs discarded because all dest channels or TDPU IDs in use Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatCommfail 11.1.230.5.66.8.3.1.18
EFT reqs that couldn't be delivered due to comm failure Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatInvrstpdu 11.1.230.5.66.8.3.1.19
EFT rsps discarded because they did not contain valid TPDUs Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatDnlnkfail 11.1.230.5.66.8.3.1.20
EFT rsps discarded because they did not match any request Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatRspnomtch 11.1.230.5.66.8.3.1.21
EFT rsps discarded because they did not match any request Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatConnfail 11.1.230.5.66.8.3.1.22
EFT requests lost because of connection failures Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatRsptimout 11.1.230.5.66.8.3.1.23
EFT rsps (map table entries) that were timed out (response lost) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNmsbaddst 11.1.230.5.66.8.3.1.24
NMS reqs with bad destination addresses Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNmsbadhst 11.1.230.5.66.8.3.1.25
NMS reqs with bad source addresses (no matching host ID in posnmsmap file) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNbadframes 11.1.230.5.66.8.3.1.26
NMS reqs with bad source addresses (no matching host ID in posnmsmap file) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatNtoolong 11.1.230.5.66.8.3.1.27
NMS reqs with bad source addresses (no matching host ID in posnmsmap file) Statistic is zeroed at startup time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvPosstatDtreset 11.1.230.5.66.8.3.1.28
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvApacsconf 11.1.230.5.50.1
OBJECT IDENTIFIER    

nvApacsconfMaxRec 11.1.230.5.50.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsconfNumRec 11.1.230.5.50.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsconfTable 11.1.230.5.50.1.3
Apacsconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvApacsconfEntry

nvApacsconfEntry 11.1.230.5.50.1.3.1
Apacsconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvApacsconfEntry  

nvApacsconfIndex 11.1.230.5.50.1.3.1.1
Index of Apacsconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsconfNodename 11.1.230.5.50.1.3.1.2
For display purpose only Not used by Apacs software
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvApacsconfSitename 11.1.230.5.50.1.3.1.3
For display purpose only Not used by Apacs software other than in generating alarms
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

nvApacsconfHelpphone 11.1.230.5.50.1.3.1.4
For display purpose in INF help message. Phone number of cardway help desk
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvApacsconfReserve1 11.1.230.5.50.1.3.1.5
OBSOLETE - removed field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvApacsconfBillingT1 11.1.230.5.50.1.3.1.6
Call duration timer limit for billing ( in 100th secs ) Default value of 500
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvApacsconfBillingT2 11.1.230.5.50.1.3.1.7
Call duration timer limit for billing ( in 100th secs ) Default value of 1000
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvApacsconfBillingT3 11.1.230.5.50.1.3.1.8
Call duration timer limit for billing ( in 100th secs ) Default value of 1500
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvApacsconfBillingT4 11.1.230.5.50.1.3.1.9
Call duration timer limit for billing ( in 100th secs ) Default value of 2000
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvApacsconfBillingT5 11.1.230.5.50.1.3.1.10
Call duration timer limit for billing ( in 100th secs ) Default value of 3000
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvApacsconfBillingT6 11.1.230.5.50.1.3.1.11
Call duration timer limit for billing ( in 100th secs ) Default value of 6000
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvApacsconfDlrtries 11.1.230.5.50.1.3.1.13
number of retries to deliver data before disconnecting Default value of 0 -- nevada retries 6 times by default
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvApacsconfTimerA 11.1.230.5.50.1.3.1.14
time in sec,for timer A Default value of 5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvApacsconfTimerB 11.1.230.5.50.1.3.1.15
time in sec,for timer A Default value of 10
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvApacsconfTimerC 11.1.230.5.50.1.3.1.16
time in sec,for timer A Default value of 40
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvApacsconfDscdleeot 11.1.230.5.50.1.3.1.17
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvApacsconfParerrall 11.1.230.5.50.1.3.1.18
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvApacsconfStatus 11.1.230.5.50.1.3.1.19
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvAnuaconf 11.1.230.5.50.2
OBJECT IDENTIFIER    

nvAnuaconfMaxRec 11.1.230.5.50.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAnuaconfNumRec 11.1.230.5.50.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAnuaconfTable 11.1.230.5.50.2.3
Anuaconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvAnuaconfEntry

nvAnuaconfEntry 11.1.230.5.50.2.3.1
Anuaconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvAnuaconfEntry  

nvAnuaconfIndex 11.1.230.5.50.2.3.1.1
Index of Anuaconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAnuaconfLabel1 11.1.230.5.50.2.3.1.2
Identifier to match alternate label in case of redirection
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvAnuaconfReserve1 11.1.230.5.50.2.3.1.3
OBSOLETE - removed field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..2)  

nvAnuaconfNuaAddress 11.1.230.5.50.2.3.1.4
Null terminated ascii string, used ot match the address string received from the terminal and/or the x.121 address of the x.25 call placed to the host
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvAnuaconfAltLabel 11.1.230.5.50.2.3.1.5
indicates the label1 of the anuaconf record to be used for redirection
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvAnuaconfRsvrReverse 11.1.230.5.50.2.3.1.6
reverse charging indication default value is no
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvAnuaconfRedirect 11.1.230.5.50.2.3.1.7
Condition for redirecting call default value is no
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), immed(2), fail(3)  

nvAnuaconfRetries 11.1.230.5.50.2.3.1.8
number of call retries default value is 2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..20  

nvAnuaconfPreempt 11.1.230.5.50.2.3.1.9
Call preemption indication default value is no
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvAnuaconfMaxpsze 11.1.230.5.50.2.3.1.10
Maximum message size default value is 256
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER psze-128(8), psze-256(9), psze-512(10), psze-1024(11), psze-2048(12), psze-4096(13)  

nvAnuaconfStrippar 11.1.230.5.50.2.3.1.11
Strip parity bit ? default value is no
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

nvAnuaconfStatus 11.1.230.5.50.2.3.1.12
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvAbillstat 11.1.230.5.50.3
OBJECT IDENTIFIER    

nvAbillstatMaxRec 11.1.230.5.50.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatNumRec 11.1.230.5.50.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatTable 11.1.230.5.50.3.3
Abillstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvAbillstatEntry

nvAbillstatEntry 11.1.230.5.50.3.3.1
Abillstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvAbillstatEntry  

nvAbillstatIndex 11.1.230.5.50.3.3.1.1
Index of Abillstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatNua 11.1.230.5.50.3.3.1.2
Network User Address
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvAbillstatTbcalls 11.1.230.5.50.3.3.1.3
Total number of calls to this nua
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatTbtime 11.1.230.5.50.3.3.1.4
Total time to this nua in 100th of second
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatTfail 11.1.230.5.50.3.3.1.5
Number of failed call request
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatTxbytes 11.1.230.5.50.3.3.1.6
Number of bytes of data Transmitted to this nua
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatRxbytes 11.1.230.5.50.3.3.1.7
Number of bytes of data received from this nua
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB1call 11.1.230.5.50.3.3.1.8
Number of calls greater than call duration timer b1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB1time 11.1.230.5.50.3.3.1.9
Total time for calls greater than timer b1 (100th of sec)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB2call 11.1.230.5.50.3.3.1.10
Number of calls greater than call duration timer b2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB2time 11.1.230.5.50.3.3.1.11
Total time for calls greater than timer b2 (100th of sec)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB3call 11.1.230.5.50.3.3.1.12
Number of calls greater than call duration timer b3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB3time 11.1.230.5.50.3.3.1.13
Total time for calls greater than timer b3 (100th of sec)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB4call 11.1.230.5.50.3.3.1.14
Number of calls greater than call duration timer b4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB4time 11.1.230.5.50.3.3.1.15
Total time for calls greater than timer b4 (100th of sec)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB5call 11.1.230.5.50.3.3.1.16
Number of calls greater than call duration timer b5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB5time 11.1.230.5.50.3.3.1.17
Total time for calls greater than timer b5 (100th of sec)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB6call 11.1.230.5.50.3.3.1.18
Number of calls greater than call duration timer b7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB6time 11.1.230.5.50.3.3.1.19
Total time for calls greater than timer b6 (100th of sec)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB7call 11.1.230.5.50.3.3.1.20
Number of calls greater than call duration timer b7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatB7time 11.1.230.5.50.3.3.1.21
Total time for calls greater than timer b7 (100th of sec)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatPbcalls 11.1.230.5.50.3.3.1.22
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatPbtime 11.1.230.5.50.3.3.1.23
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatPfail 11.1.230.5.50.3.3.1.24
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatPtxbytes 11.1.230.5.50.3.3.1.25
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatPrxbytes 11.1.230.5.50.3.3.1.26
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP1call 11.1.230.5.50.3.3.1.27
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP1time 11.1.230.5.50.3.3.1.28
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP2call 11.1.230.5.50.3.3.1.29
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP2time 11.1.230.5.50.3.3.1.30
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP3call 11.1.230.5.50.3.3.1.31
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP3time 11.1.230.5.50.3.3.1.32
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP4call 11.1.230.5.50.3.3.1.33
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP4time 11.1.230.5.50.3.3.1.34
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP5call 11.1.230.5.50.3.3.1.35
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP5time 11.1.230.5.50.3.3.1.36
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP6call 11.1.230.5.50.3.3.1.37
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP6time 11.1.230.5.50.3.3.1.38
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP7call 11.1.230.5.50.3.3.1.39
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatP7time 11.1.230.5.50.3.3.1.40
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvAbillstatDtreset 11.1.230.5.50.3.3.1.41
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvApmdmstat 11.1.230.5.50.4
OBJECT IDENTIFIER    

nvApmdmstatMaxRec 11.1.230.5.50.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApddmstatNumRec 11.1.230.5.50.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatTable 11.1.230.5.50.4.3
Apmdmstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvApmdmstatEntry

nvApmdmstatEntry 11.1.230.5.50.4.3.1
Apmdmstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvApmdmstatEntry  

nvApmdmstatIndex 11.1.230.5.50.4.3.1.1
Index -- db record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatSpeed 11.1.230.5.50.4.3.1.2
Modem speed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatTbcalls 11.1.230.5.50.4.3.1.3
Total Number of calls at this speed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatSuccess 11.1.230.5.50.4.3.1.4
Number of successful connections
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatHostclr 11.1.230.5.50.4.3.1.5
Number of calls cleared by the Host
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatNwclr 11.1.230.5.50.4.3.1.6
Number of calls cleared by the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatFltrain 11.1.230.5.50.4.3.1.7
Number of calls that failed to train
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatFlsess 11.1.230.5.50.4.3.1.8
Number with no A-block
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatTxpkt 11.1.230.5.50.4.3.1.9
Number of x.25 packet Tx
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatRxpkt 11.1.230.5.50.4.3.1.10
Number of x.25 packet Rx
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatTxbytes 11.1.230.5.50.4.3.1.11
Number of x.25 bytes of data Tx
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatRxbytes 11.1.230.5.50.4.3.1.12
Number of x.25 bytes of data rx
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatB1calls 11.1.230.5.50.4.3.1.13
Number of calls greater than call duration timer b1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatB2calls 11.1.230.5.50.4.3.1.14
Number of calls greater than call duration timer b2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatB3calls 11.1.230.5.50.4.3.1.15
Number of calls greater than call duration timer b3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatB4calls 11.1.230.5.50.4.3.1.16
Number of calls greater than call duration timer b4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatB5calls 11.1.230.5.50.4.3.1.17
Number of calls greater than call duration timer b5
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatB6calls 11.1.230.5.50.4.3.1.18
Number of calls greater than call duration timer b6
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatB7calls 11.1.230.5.50.4.3.1.19
Number of calls greater than call duration timer b7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApmdmstatDtreset 11.1.230.5.50.4.3.1.20
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvApacsstat 11.1.230.5.50.5
OBJECT IDENTIFIER    

nvApacsstatMaxRec 11.1.230.5.50.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatNumRec 11.1.230.5.50.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTable 11.1.230.5.50.5.3
Apacsstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvApacsstatEntry

nvApacsstatEntry 11.1.230.5.50.5.3.1
Apacsstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvApacsstatEntry  

nvApacsstatIndex 11.1.230.5.50.5.3.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatNidle 11.1.230.5.50.5.3.1.2
number of iti ports in idle state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatNxidle 11.1.230.5.50.5.3.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatCursimul 11.1.230.5.50.5.3.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatResetdate 11.1.230.5.50.5.3.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvApacsstatTcalls 11.1.230.5.50.5.3.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTxnaks 11.1.230.5.50.5.3.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatRxnaks 11.1.230.5.50.5.3.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTxbytes 11.1.230.5.50.5.3.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatRxbytes 11.1.230.5.50.5.3.1.10
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatCallrcv 11.1.230.5.50.5.3.1.11
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatFailneg 11.1.230.5.50.5.3.1.12
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatNoadrblk 11.1.230.5.50.5.3.1.13
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatInvadrblk 11.1.230.5.50.5.3.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatNonuamtch 11.1.230.5.50.5.3.1.15
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTrmdscsu 11.1.230.5.50.5.3.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatLoscarsu 11.1.230.5.50.5.3.1.17
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatGdadrblks 11.1.230.5.50.5.3.1.18
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatX25clrcip 11.1.230.5.50.5.3.1.19
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatActtmocip 11.1.230.5.50.5.3.1.20
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTrmdsccip 11.1.230.5.50.5.3.1.21
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatLoscarcip 11.1.230.5.50.5.3.1.22
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatLrcerrcip 11.1.230.5.50.5.3.1.23
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTmoerrcip 11.1.230.5.50.5.3.1.24
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatX25conns 11.1.230.5.50.5.3.1.25
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatX25clrdat 11.1.230.5.50.5.3.1.26
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatActtmodat 11.1.230.5.50.5.3.1.27
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTrmdscdat 11.1.230.5.50.5.3.1.28
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatLoscardat 11.1.230.5.50.5.3.1.29
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatDscnoack 11.1.230.5.50.5.3.1.30
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatDscexcnak 11.1.230.5.50.5.3.1.31
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatLrcerrdat 11.1.230.5.50.5.3.1.32
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatBdhostblk 11.1.230.5.50.5.3.1.33
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTrmnodat 11.1.230.5.50.5.3.1.34
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatHostnodat 11.1.230.5.50.5.3.1.35
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTrmnoack 11.1.230.5.50.5.3.1.36
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatRetrntmo 11.1.230.5.50.5.3.1.37
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatRetrnnak 11.1.230.5.50.5.3.1.38
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatTxenqs 11.1.230.5.50.5.3.1.39
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatDleeotsnt 11.1.230.5.50.5.3.1.40
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatDleeotrcv 11.1.230.5.50.5.3.1.41
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatUnxhstclr 11.1.230.5.50.5.3.1.42
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatNwadrblks 11.1.230.5.50.5.3.1.43
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatRjadrblks 11.1.230.5.50.5.3.1.44
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatNonuaentr 11.1.230.5.50.5.3.1.45
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatMaxsimul 11.1.230.5.50.5.3.1.46
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatN300bd 11.1.230.5.50.5.3.1.47
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatN1200bd 11.1.230.5.50.5.3.1.48
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatN2400bd 11.1.230.5.50.5.3.1.49
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatN9600bd 11.1.230.5.50.5.3.1.50
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatN14400bd 11.1.230.5.50.5.3.1.51
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatN28800bd 11.1.230.5.50.5.3.1.52
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatSimultime 11.1.230.5.50.5.3.1.53
When maxsimul reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvApacsstatParerrsu 11.1.230.5.50.5.3.1.54
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatParerrcip 11.1.230.5.50.5.3.1.55
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatParerrdat 11.1.230.5.50.5.3.1.56
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApacsstatDtreset 11.1.230.5.50.5.3.1.57
Date & Time statistics last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvBillconf 11.1.230.5.50.6
OBJECT IDENTIFIER    

nvBillconfMaxRec 11.1.230.5.50.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillconfNumRec 11.1.230.5.50.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillconf1Table 11.1.230.5.50.6.3
Billconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvBillconf1Entry

nvBillconf1Entry 11.1.230.5.50.6.3.1
Billconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvBillconf1Entry  

nvBillconf1Index 11.1.230.5.50.6.3.1.1
Index of Billconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillconfEnable 11.1.230.5.50.6.3.1.2
Enable/Disable billstat accounting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

nvBillconfSegsize 11.1.230.5.50.6.3.1.3
Segment size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32767  

nvBillconfSet1 11.1.230.5.50.6.3.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet1nua1 11.1.230.5.50.6.3.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet1nua2 11.1.230.5.50.6.3.1.6
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet1nua3 11.1.230.5.50.6.3.1.7
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet2 11.1.230.5.50.6.3.1.8
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet2nua1 11.1.230.5.50.6.3.1.9
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet2nua2 11.1.230.5.50.6.3.1.10
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet2nua3 11.1.230.5.50.6.3.1.11
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet3 11.1.230.5.50.6.3.1.12
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet3nua1 11.1.230.5.50.6.3.1.13
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet3nua2 11.1.230.5.50.6.3.1.14
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet3nua3 11.1.230.5.50.6.3.1.15
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet4 11.1.230.5.50.6.3.1.16
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet4nua1 11.1.230.5.50.6.3.1.17
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet4nua2 11.1.230.5.50.6.3.1.18
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet4nua3 11.1.230.5.50.6.3.1.19
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet5 11.1.230.5.50.6.3.1.20
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet5nua1 11.1.230.5.50.6.3.1.21
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet5nua2 11.1.230.5.50.6.3.1.22
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet5nua3 11.1.230.5.50.6.3.1.23
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet6 11.1.230.5.50.6.3.1.24
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet6nua1 11.1.230.5.50.6.3.1.25
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet6nua2 11.1.230.5.50.6.3.1.26
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet6nua3 11.1.230.5.50.6.3.1.27
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconf2Table 11.1.230.5.50.6.4
Billconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvBillconf2Entry

nvBillconf2Entry 11.1.230.5.50.6.4.1
Billconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvBillconf2Entry  

nvBillconf2Index 11.1.230.5.50.6.4.1.1
Index of Billconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillconfSet7 11.1.230.5.50.6.4.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet7nua1 11.1.230.5.50.6.4.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet7nua2 11.1.230.5.50.6.4.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet7nua3 11.1.230.5.50.6.4.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet8 11.1.230.5.50.6.4.1.6
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet8nua1 11.1.230.5.50.6.4.1.7
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet8nua2 11.1.230.5.50.6.4.1.8
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet8nua3 11.1.230.5.50.6.4.1.9
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet9 11.1.230.5.50.6.4.1.10
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet9nua1 11.1.230.5.50.6.4.1.11
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet9nua2 11.1.230.5.50.6.4.1.12
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet9nua3 11.1.230.5.50.6.4.1.13
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet10 11.1.230.5.50.6.4.1.14
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet10nua1 11.1.230.5.50.6.4.1.15
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet10nua2 11.1.230.5.50.6.4.1.16
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet10nua3 11.1.230.5.50.6.4.1.17
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet11 11.1.230.5.50.6.4.1.18
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet11nua1 11.1.230.5.50.6.4.1.19
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet11nua2 11.1.230.5.50.6.4.1.20
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet11nua3 11.1.230.5.50.6.4.1.21
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet12 11.1.230.5.50.6.4.1.22
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvBillconfSet12nua1 11.1.230.5.50.6.4.1.23
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet12nua2 11.1.230.5.50.6.4.1.24
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillconfSet12nua3 11.1.230.5.50.6.4.1.25
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvBillstat 11.1.230.5.50.7
OBJECT IDENTIFIER    

nvBillstatMaxRec 11.1.230.5.50.7.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatNumRec 11.1.230.5.50.7.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatTable 11.1.230.5.50.7.3
Billstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvBillstatEntry

nvBillstatEntry 11.1.230.5.50.7.3.1
Billstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvBillstatEntry  

nvBillstatIndex 11.1.230.5.50.7.3.1.1
Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatNodeid 11.1.230.5.50.7.3.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatDate 11.1.230.5.50.7.3.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..6)  

nvBillstatTime 11.1.230.5.50.7.3.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvBillstatNuaset 11.1.230.5.50.7.3.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatN300bps 11.1.230.5.50.7.3.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatN1200bps 11.1.230.5.50.7.3.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatN2400bps 11.1.230.5.50.7.3.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatNgrtr2400 11.1.230.5.50.7.3.1.10
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatTxseg 11.1.230.5.50.7.3.1.11
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatRxseg 11.1.230.5.50.7.3.1.12
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatRxcallc 11.1.230.5.50.7.3.1.13
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatHostclr 11.1.230.5.50.7.3.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatNetclr 11.1.230.5.50.7.3.1.15
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatTxpak 11.1.230.5.50.7.3.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatRxpak 11.1.230.5.50.7.3.1.17
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatLess5 11.1.230.5.50.7.3.1.18
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstat5to10 11.1.230.5.50.7.3.1.19
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstat10to15 11.1.230.5.50.7.3.1.20
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstat15to20 11.1.230.5.50.7.3.1.21
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatGrtr20 11.1.230.5.50.7.3.1.22
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvBillstatClosed 11.1.230.5.50.7.3.1.23
Record closed or open.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

nvApfilter 11.1.230.5.50.8
OBJECT IDENTIFIER    

nvApfilterMaxRec 11.1.230.5.50.8.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApfilterNumRec 11.1.230.5.50.8.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApfilterTable 11.1.230.5.50.8.3
Apfilter file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvApfilterEntry

nvApfilterEntry 11.1.230.5.50.8.3.1
Apfilter record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvApfilterEntry  

nvApfilterIndex 11.1.230.5.50.8.3.1.1
Index of Apfilter record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApfilterCalled 11.1.230.5.50.8.3.1.2
Called Telephone Number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

nvApfilterCalling 11.1.230.5.50.8.3.1.3
Calling Telephone Number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

nvApfilterAblock 11.1.230.5.50.8.3.1.4
A Block.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvApfilterLabel1 11.1.230.5.50.8.3.1.5
ANUACONF Label 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvApfilterMerchid 11.1.230.5.50.8.3.1.6
Merchant ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

nvApfilterTermid 11.1.230.5.50.8.3.1.7
Terminal ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvApfilterFailcause 11.1.230.5.50.8.3.1.8
Failure Cause.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER any(1), none(2), failneg(3), noadrblk(4), invadrblk(5), nonuamtch(6), trmdscsu(7), loscarsu(8), parerrsu(9), x25clrcip(10), acttmocip(11), trmdsccip(12), loscarcip(13), lrcerrcip(14), parerrcip(15), tmoerrcip(16), x25clrdat(17), acttmodat(18), trmdscdat(19), loscardat(20), dscnoack(21), dscexcnak(22), lrcerrdat(23), parerrdat(24), bdhostblk(25)  

nvApfilterThreshold 11.1.230.5.50.8.3.1.9
Number of records per minute for this filter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

nvApfilterStatus 11.1.230.5.50.8.3.1.15
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvApfclstat 11.1.230.5.50.9
OBJECT IDENTIFIER    

nvApfclstatMaxRec 11.1.230.5.50.9.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApfclstatNumRec 11.1.230.5.50.9.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApfclstatTable 11.1.230.5.50.9.3
Apfclstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvApfclstatEntry

nvApfclstatEntry 11.1.230.5.50.9.3.1
Apfclstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvApfclstatEntry  

nvApfclstatIndex 11.1.230.5.50.9.3.1.1
Index of Apfclstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApfclstatDate 11.1.230.5.50.9.3.1.2
Date of Call Failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvApfclstatTime 11.1.230.5.50.9.3.1.3
Time of Call Failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvApfclstatCalling 11.1.230.5.50.9.3.1.4
Calling telephone number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..21)  

nvApfclstatCalled 11.1.230.5.50.9.3.1.5
Called telephone number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..21)  

nvApfclstatAblock 11.1.230.5.50.9.3.1.6
A-block received from terminal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvApfclstatNua 11.1.230.5.50.9.3.1.7
NUA to which call was connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvApfclstatLabel1 11.1.230.5.50.9.3.1.8
ANUACONF label1 used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvApfclstatMerchid 11.1.230.5.50.9.3.1.9
Merchant ID from transaction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

nvApfclstatTermid 11.1.230.5.50.9.3.1.10
Terminal ID from transaction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvApfclstatSpeed 11.1.230.5.50.9.3.1.11
Speed of modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvApfclstatTxbytes 11.1.230.5.50.9.3.1.12
Number of bytes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApfclstatRxbytes 11.1.230.5.50.9.3.1.13
Number of bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApfclstatIsdnclr 11.1.230.5.50.9.3.1.14
ISDN Clear codes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvApfclstatX25clr 11.1.230.5.50.9.3.1.15
X25 Clear codes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvApfclstatDialind 11.1.230.5.50.9.3.1.16
Dial indicator from the transaction data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApfclstatTermtype 11.1.230.5.50.9.3.1.17
Terminal type from the transaction data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvApfclstatPstndur 11.1.230.5.50.9.3.1.18
PSTN duration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvApfclstatX25dur 11.1.230.5.50.9.3.1.19
X25 duration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvApfclstatDspname 11.1.230.5.50.9.3.1.20
DSP Port Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvApfclstatPriname 11.1.230.5.50.9.3.1.21
PRI link number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9)  

nvApfclstatWanport 11.1.230.5.50.9.3.1.22
X25 Port Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvApfclstatFailcause 11.1.230.5.50.9.3.1.23
Failure Cause.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER any(1), none(2), failneg(3), noadrblk(4), invadrblk(5), nonuamtch(6), trmdscsu(7), loscarsu(8), parerrsu(9), x25clrcip(10), acttmocip(11), trmdsccip(12), loscarcip(13), lrcerrcip(14), parerrcip(15), tmoerrcip(16), x25clrdat(17), acttmodat(18), trmdscdat(19), loscardat(20), dscnoack(21), dscexcnak(22), lrcerrdat(23), parerrdat(24), bdhostblk(25)  

nvApfclstatFilter 11.1.230.5.50.9.3.1.24
Filter number - not used in this file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvApclstat 11.1.230.5.50.10
OBJECT IDENTIFIER    

nvApclstatMaxRec 11.1.230.5.50.10.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApclstatNumRec 11.1.230.5.50.10.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApclstatTable 11.1.230.5.50.10.3
Apclstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvApclstatEntry

nvApclstatEntry 11.1.230.5.50.10.3.1
Apclstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvApclstatEntry  

nvApclstatIndex 11.1.230.5.50.10.3.1.1
Index of Apclstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApclstatDate 11.1.230.5.50.10.3.1.2
Date of Call Failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

nvApclstatTime 11.1.230.5.50.10.3.1.3
Time of Call Failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvApclstatCalling 11.1.230.5.50.10.3.1.4
Calling telephone number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..21)  

nvApclstatCalled 11.1.230.5.50.10.3.1.5
Called telephone number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..21)  

nvApclstatAblock 11.1.230.5.50.10.3.1.6
A-block received from terminal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvApclstatNua 11.1.230.5.50.10.3.1.7
NUA to which call was connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvApclstatLabel1 11.1.230.5.50.10.3.1.8
ANUACONF label1 used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvApclstatMerchid 11.1.230.5.50.10.3.1.9
Merchant ID from transaction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

nvApclstatTermid 11.1.230.5.50.10.3.1.10
Terminal ID from transaction.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

nvApclstatSpeed 11.1.230.5.50.10.3.1.11
Speed of modem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvApclstatTxbytes 11.1.230.5.50.10.3.1.12
Number of bytes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApclstatRxbytes 11.1.230.5.50.10.3.1.13
Number of bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApclstatIsdnclr 11.1.230.5.50.10.3.1.14
ISDN Clear codes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvApclstatX25clr 11.1.230.5.50.10.3.1.15
X25 Clear codes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvApclstatDialind 11.1.230.5.50.10.3.1.16
Dial indicator from the transaction data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvApclstatTermtype 11.1.230.5.50.10.3.1.17
Terminal type from the transaction data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvApclstatPstndur 11.1.230.5.50.10.3.1.18
PSTN duration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvApclstatX25dur 11.1.230.5.50.10.3.1.19
X25 duration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

nvApclstatDspname 11.1.230.5.50.10.3.1.20
DSP Port Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvApclstatPriname 11.1.230.5.50.10.3.1.21
PRI link number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8), pri8(9)  

nvApclstatWanport 11.1.230.5.50.10.3.1.22
X25 Port Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvApclstatFailcause 11.1.230.5.50.10.3.1.23
Failure Cause.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER any(1), none(2), failneg(3), noadrblk(4), invadrblk(5), nonuamtch(6), trmdscsu(7), loscarsu(8), parerrsu(9), x25clrcip(10), acttmocip(11), trmdsccip(12), loscarcip(13), lrcerrcip(14), parerrcip(15), tmoerrcip(16), x25clrdat(17), acttmodat(18), trmdscdat(19), loscardat(20), dscnoack(21), dscexcnak(22), lrcerrdat(23), parerrdat(24), bdhostblk(25)  

nvApclstatFilter 11.1.230.5.50.10.3.1.24
Filter number used to produce this record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvR2prof 11.1.230.5.55.1
OBJECT IDENTIFIER    

nvR2profMaxRec 11.1.230.5.55.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2profNumRec 11.1.230.5.55.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2profTable 11.1.230.5.55.1.3
R2prof file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvR2profEntry

nvR2profEntry 11.1.230.5.55.1.3.1
R2prof record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvR2profEntry  

nvR2profIndex 11.1.230.5.55.1.3.1.1
Index of R2prof record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2profProfname 11.1.230.5.55.1.3.1.2
Name of R2 flavor (profname)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvR2profSuffix 11.1.230.5.55.1.3.1.3
Abbreviation of R2 flavor (suffix)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvR2profcdBits 11.1.230.5.55.1.3.1.4
Support for CD bits (cdbits) Default value 2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

nvR2profClearback 11.1.230.5.55.1.3.1.5
Support for CLEAR_BACK (clearback)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sup(6), notsup(7)  

nvR2profForcerel 11.1.230.5.55.1.3.1.6
Support for Forced Release (forcerel)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sup(6), notsup(7)  

nvR2profClearack 11.1.230.5.55.1.3.1.7
Support for CLEAR_ACK (clearack)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sup(6), notsup(7)  

nvR2profReanswer 11.1.230.5.55.1.3.1.8
Support for Reanswer (reanswer)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sup(6), notsup(7)  

nvR2profMfmode 11.1.230.5.55.1.3.1.9
MF scheme for in-band signaling (mfmode)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER compelled(24), semicompel(25), noncompel(26)  

nvR2profMfnextdig 11.1.230.5.55.1.3.1.10
MF code for send next digit (mfnextdig)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), a1(32), a2(33), a3(34), a4(35), a5(36), a6(37), a7(38), a8(39), a9(40), a10(41), a11(42), a12(43), a13(44), a14(45), a15(46), b1(47), b2(48), b3(49), b4(50), b5(51), b6(52), b7(53), b8(54), b9(55), b10(56), b11(57), b12(58), b13(59), b14(60), b15(61)  

nvR2profMfrestart 11.1.230.5.55.1.3.1.11
MF code for restart (mfrestart)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), a1(32), a2(33), a3(34), a4(35), a5(36), a6(37), a7(38), a8(39), a9(40), a10(41), a11(42), a12(43), a13(44), a14(45), a15(46), b1(47), b2(48), b3(49), b4(50), b5(51), b6(52), b7(53), b8(54), b9(55), b10(56), b11(57), b12(58), b13(59), b14(60), b15(61)  

nvR2profMfcongstion 11.1.230.5.55.1.3.1.12
MF code for eqpt congestion (mfcongestion)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), a1(32), a2(33), a3(34), a4(35), a5(36), a6(37), a7(38), a8(39), a9(40), a10(41), a11(42), a12(43), a13(44), a14(45), a15(46), b1(47), b2(48), b3(49), b4(50), b5(51), b6(52), b7(53), b8(54), b9(55), b10(56), b11(57), b12(58), b13(59), b14(60), b15(61)  

nvR2profMfvacant 11.1.230.5.55.1.3.1.13
MF code for vacant number (mfvacant)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), a1(32), a2(33), a3(34), a4(35), a5(36), a6(37), a7(38), a8(39), a9(40), a10(41), a11(42), a12(43), a13(44), a14(45), a15(46), b1(47), b2(48), b3(49), b4(50), b5(51), b6(52), b7(53), b8(54), b9(55), b10(56), b11(57), b12(58), b13(59), b14(60), b15(61)  

nvR2profMfspeech 11.1.230.5.55.1.3.1.14
MF code for set up speech charge (mfspeech)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), a1(32), a2(33), a3(34), a4(35), a5(36), a6(37), a7(38), a8(39), a9(40), a10(41), a11(42), a12(43), a13(44), a14(45), a15(46), b1(47), b2(48), b3(49), b4(50), b5(51), b6(52), b7(53), b8(54), b9(55), b10(56), b11(57), b12(58), b13(59), b14(60), b15(61)  

nvR2profMfbusy 11.1.230.5.55.1.3.1.15
MF code for line busy (mfbusy)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), a1(32), a2(33), a3(34), a4(35), a5(36), a6(37), a7(38), a8(39), a9(40), a10(41), a11(42), a12(43), a13(44), a14(45), a15(46), b1(47), b2(48), b3(49), b4(50), b5(51), b6(52), b7(53), b8(54), b9(55), b10(56), b11(57), b12(58), b13(59), b14(60), b15(61)  

nvR2profMfspchnc 11.1.230.5.55.1.3.1.16
MF code for free no charge (mfspchnc)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), a1(32), a2(33), a3(34), a4(35), a5(36), a6(37), a7(38), a8(39), a9(40), a10(41), a11(42), a12(43), a13(44), a14(45), a15(46), b1(47), b2(48), b3(49), b4(50), b5(51), b6(52), b7(53), b8(54), b9(55), b10(56), b11(57), b12(58), b13(59), b14(60), b15(61)  

nvR2profMfgroupb 11.1.230.5.55.1.3.1.17
MF code for change to group B (mfgroupb)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), a1(32), a2(33), a3(34), a4(35), a5(36), a6(37), a7(38), a8(39), a9(40), a10(41), a11(42), a12(43), a13(44), a14(45), a15(46), b1(47), b2(48), b3(49), b4(50), b5(51), b6(52), b7(53), b8(54), b9(55), b10(56), b11(57), b12(58), b13(59), b14(60), b15(61)  

nvR2profMfanumsch 11.1.230.5.55.1.3.1.18
Trans prot type for calling number (mfanumsch)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

nvR2profMftimeout 11.1.230.5.55.1.3.1.19
Timeout for MF signaling (mftimeout)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvR2profStatus 11.1.230.5.55.1.3.1.20
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvR2profAnswergrd 11.1.230.5.55.1.3.1.21
Minimal duration of answer signal in ms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvR2profClrfwdgrd 11.1.230.5.55.1.3.1.22
Minimal duration of clr fwd signal in ms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvR2profMfabnrel 11.1.230.5.55.1.3.1.23
MF code for abnormal release of inband.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), a1(32), a2(33), a3(34), a4(35), a5(36), a6(37), a7(38), a8(39), a9(40), a10(41), a11(42), a12(43), a13(44), a14(45), a15(46), b1(47), b2(48), b3(49), b4(50), b5(51), b6(52), b7(53), b8(54), b9(55), b10(56), b11(57), b12(58), b13(59), b14(60), b15(61)  

nvR2profIdlealmsk 11.1.230.5.55.1.3.1.24
Mask alarms in IDLE state?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvR2profSeizalmsk 11.1.230.5.55.1.3.1.25
Mask alarms in SEIZED state?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvR2profSzakalmsk 11.1.230.5.55.1.3.1.26
Mask alarms in SEIZE ACK state?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvR2profAnswalmsk 11.1.230.5.55.1.3.1.27
Mask alarms in ANSWERED state?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvR2profClbkalmsk 11.1.230.5.55.1.3.1.28
Mask alarms in ANSWERED state?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvR2profFcrlalmsk 11.1.230.5.55.1.3.1.29
Mask alarms in FORCE RELEASE state?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvR2profClfwalmsk 11.1.230.5.55.1.3.1.30
Mask alarms in CLEAR FWD state?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvR2profBlckalmsk 11.1.230.5.55.1.3.1.31
Mask alarms in BLOCKED state?
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvR2syspar 11.1.230.5.55.2
OBJECT IDENTIFIER    

nvR2sysparMaxRec 11.1.230.5.55.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2sysparNumRec 11.1.230.5.55.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2sysparTable 11.1.230.5.55.2.3
R2syspar file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvR2sysparEntry

nvR2sysparEntry 11.1.230.5.55.2.3.1
R2syspar record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvR2sysparEntry  

nvR2sysparIndex 11.1.230.5.55.2.3.1.1
Index of R2syspar record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2sysparProfname 11.1.230.5.55.2.3.1.2
Name of R2 flavor (profname)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvR2sysparMaxperdsp 11.1.230.5.55.2.3.1.3
Signaling channels allowed per R2DSP (maxperdsp)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nvR2sysparAllocthrs 11.1.230.5.55.2.3.1.4
Allocation threshold for R2DSPs (allocthrs)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvR2sysparDeallthrs 11.1.230.5.55.2.3.1.5
Deallocation threshold for R2DSPs (deallthrs)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvR2sysparStatint 11.1.230.5.55.2.3.1.6
Health status message interval for R2DSPs (statint)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvR2sysparAlarmint 11.1.230.5.55.2.3.1.7
Debounce for line status changes (alarmint)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvR2sysparLineway 11.1.230.5.55.2.3.1.8
Direction of allowed R2 calls (lineway)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inonly(104), inout(105)  

nvR2sysparMaxbnmlen 11.1.230.5.55.2.3.1.9
Maximum length of called number for incoming calls (maxbnmlen) default is zero
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..24  

nvR2sysparMinbnmlen 11.1.230.5.55.2.3.1.10
Minimum length of called number for incoming calls (minbnmlen) Default value is zero
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..24  

nvR2sysparGetcalling 11.1.230.5.55.2.3.1.11
Whether or not calling number is needed (getcallng) default is yes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER yes(2), no(3)  

nvR2conf 11.1.230.5.55.3
OBJECT IDENTIFIER    

nvR2confMaxRec 11.1.230.5.55.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2confNumRec 11.1.230.5.55.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2confTable 11.1.230.5.55.3.3
R2conf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvR2confEntry

nvR2confEntry 11.1.230.5.55.3.3.1
R2conf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvR2confEntry  

nvR2confIndex 11.1.230.5.55.3.3.1.1
Index of R2conf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2confDliname 11.1.230.5.55.3.3.1.3
Name of DLI port (dliname)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvR2confStatus 11.1.230.5.55.3.3.1.4
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvR2pstat 11.1.230.5.55.4
OBJECT IDENTIFIER    

nvR2pstatMaxRec 11.1.230.5.55.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2pstatNumRec 11.1.230.5.55.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2pstatTable 11.1.230.5.55.4.3
R2pstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvR2pstatEntry

nvR2pstatEntry 11.1.230.5.55.4.3.1
R2pstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvR2pstatEntry  

nvR2pstatIndex 11.1.230.5.55.4.3.1.1
Index of R2pstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2pstatDliname 11.1.230.5.55.4.3.1.2
Name of DLI port (dliname)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvR2pstatPstat 11.1.230.5.55.4.3.1.3
Status of R2 port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(2), up(3), disabled(4), down(5)  

nvR2pstatTsstat 11.1.230.5.55.4.3.1.4
Status of R2 port's timeslots. s : means timeslot for synchronization O : means out-of-band signaling - : means no info yet B : means blocked I : means idle M : means in-band signaling (MF) C : means call is up E : means timeslot is in abnormal state D : means port is down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

nvR2pstatObr2dsp 11.1.230.5.55.4.3.1.5
R2DSP which has this ports ob sig channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvR2pstatObstat 11.1.230.5.55.4.3.1.6
status of the ob sig channel for this port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nocircuit(1), obcircsetup(2), obsigsetup(3), obsigup(4), obbad(5), dspbad(6), swerr(7)  

nvR2pstatLstatinfo 11.1.230.5.55.4.3.1.7
Information accompanying a LINE_STATUS message
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2pstatLinbadcnt 11.1.230.5.55.4.3.1.8
No. of line_status line_bad msg received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2pstatTsbadcnt 11.1.230.5.55.4.3.1.9
No. of line_status line_bad msg received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2pstatTotisigatt 11.1.230.5.55.4.3.1.10
No. of incoming in-band channels created
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2pstatToticalatt 11.1.230.5.55.4.3.1.11
No. of incoming R2 calls attempted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2pstatToticalest 11.1.230.5.55.4.3.1.12
No. of incoming R2 calls established
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2pstatTotosigatt 11.1.230.5.55.4.3.1.13
No. of outgoing in-band channels created
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2pstatTotocalatt 11.1.230.5.55.4.3.1.14
No. of outgoing R2 calls attempted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2pstatTotocalest 11.1.230.5.55.4.3.1.15
No. of outgoing R2 calls established
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2pstatDtreset 11.1.230.5.55.4.3.1.16
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvR2pstatFlavor 11.1.230.5.55.4.3.1.17
Abbreviation of R2 flavor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvR2dspstat 11.1.230.5.55.5
OBJECT IDENTIFIER    

nvR2dspstatMaxRec 11.1.230.5.55.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2dspstatNumRec 11.1.230.5.55.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2dspstatTable 11.1.230.5.55.5.3
R2dspstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvR2dspstatEntry

nvR2dspstatEntry 11.1.230.5.55.5.3.1
R2dspstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvR2dspstatEntry  

nvR2dspstatIndex 11.1.230.5.55.5.3.1.1
Index of R2dspstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2dspstatDevname 11.1.230.5.55.5.3.1.2
Name of DSP device used for this R2DSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvR2dspstatStat 11.1.230.5.55.5.3.1.3
Health status of R2DSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER r2dspinit(1), r2dspconfig(2), r2dspup(3), r2dspdown(4), r2dspfail(5), tsmalfunc(6)  

nvR2dspstatNumobchn 11.1.230.5.55.5.3.1.4
Num of ob sig channels assigned to this R2DSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2dspstatNumibchn 11.1.230.5.55.5.3.1.5
Num of ib channels assigned to this R2DSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2dspstatUnusedchn 11.1.230.5.55.5.3.1.6
Num of avaialble timeslots on this R2DSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2dspstatTotobchn 11.1.230.5.55.5.3.1.7
Cumulative total of ob channels assigned to this R2DSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2dspstatTotibchn 11.1.230.5.55.5.3.1.8
Cumulative total of ib channels assigned to this R2DSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvR2dspstatDtreset 11.1.230.5.55.5.3.1.9
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvR2dspstatFlavor 11.1.230.5.55.5.3.1.10
Abbreviation of the R2 Flavor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvR2cstat 11.1.230.5.55.6
OBJECT IDENTIFIER    

nvR2cstatMaxRec 11.1.230.5.55.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2cstatNumRec 11.1.230.5.55.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2cstatTable 11.1.230.5.55.6.3
R2cstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvR2cstatEntry

nvR2cstatEntry 11.1.230.5.55.6.3.1
R2cstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvR2cstatEntry  

nvR2cstatIndex 11.1.230.5.55.6.3.1.1
Index of R2cstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2cstatR2port 11.1.230.5.55.6.3.1.2
R2CONF record number of port carring timeslot of this call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvR2cstatTimeslot 11.1.230.5.55.6.3.1.3
Timeslot number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvR2cstatIbr2dsp 11.1.230.5.55.6.3.1.4
R2DSPSTAT recnum of R2DSP carrying this circuit
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvR2cstatCstat 11.1.230.5.55.6.3.1.5
Current status of this timeslot
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ibnocircuit(1), ibcircsetup(2), ibcircerr(3), ibcirfail(4), ibdspmalf(5), nor2dspts(6), ibdecode(7), ibcomplete(8), ibabnterm(9), ibconrej(10), rejected(11), datacall(12), cleared(13)  

nvR2cstatDirection 11.1.230.5.55.6.3.1.6
incoming or outgoing call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2)  

nvR2cstatReason 11.1.230.5.55.6.3.1.7
For failed calls reason for the failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvR2cstatCallnum 11.1.230.5.55.6.3.1.8
Sequence number of this call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvR2cstatCallednum 11.1.230.5.55.6.3.1.9
Called number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..25)  

nvR2cstatCallingnum 11.1.230.5.55.6.3.1.10
Calling number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..25)  

nvR2cstatLanguage 11.1.230.5.55.6.3.1.11
Language of call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nolang(1), discrim(2), french(3), english(4), german(5), russian(6), spanish(7), spare1(8), spare2(9), spare3(10), spare4(11)  

nvR2cstatEchosup 11.1.230.5.55.6.3.1.12
Echo suppressor
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noechosup(1), echosnone(2), echoshalf(3), echosfull(4)  

nvR2cstatCparty 11.1.230.5.55.6.3.1.13
Type of calling party
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nocparty(1), natsubpri(2), natsubnopri(3), natmaint(4), spare(5), natmanop(6), natdata(7), intsubnopri(8), intsubpri(9), intdata(10), intopftc(11)  

nvRbsyspar 11.1.230.5.58.1
OBJECT IDENTIFIER    

nvRbsysparMaxRec 11.1.230.5.58.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbsysparNumRec 11.1.230.5.58.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbsysparTable 11.1.230.5.58.1.3
Rbsyspar file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRbsysparEntry

nvRbsysparEntry 11.1.230.5.58.1.3.1
Rbsyspar record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRbsysparEntry  

nvRbsysparIndex 11.1.230.5.58.1.3.1.1
Index of Rbsyspar record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbsysparMaxperdsp 11.1.230.5.58.1.3.1.3
Signaling channels allowed per RbDSP (maxperdsp)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

nvRbsysparAllocthrs 11.1.230.5.58.1.3.1.4
Allocation threshold for RbDSPs (allocthrs)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvRbsysparDeallthrs 11.1.230.5.58.1.3.1.5
Deallocation threshold for RbDSPs (deallthrs)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

nvRbsysparStatint 11.1.230.5.58.1.3.1.6
Health status message interval for RbDSPs (statint)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRbsysparAlarmint 11.1.230.5.58.1.3.1.7
Debounce for line status changes (alarmint)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRbsysparMaxbnmlen 11.1.230.5.58.1.3.1.9
Maximum length of called number for incoming calls (maxbnmlen) default is zero
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..24  

nvRbsysparMinbnmlen 11.1.230.5.58.1.3.1.10
Minimum length of called number for incoming calls (minbnmlen) Default value is zero
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..24  

nvRbsysparPollint 11.1.230.5.58.1.3.1.11
Polling interval for RB pipes. default is 25
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRbsysparStatus 11.1.230.5.58.1.3.1.12
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvRbconf 11.1.230.5.58.2
OBJECT IDENTIFIER    

nvRbconfMaxRec 11.1.230.5.58.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbconfNumRec 11.1.230.5.58.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbconfTable 11.1.230.5.58.2.3
Rbconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRbconfEntry

nvRbconfEntry 11.1.230.5.58.2.3.1
Rbconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRbconfEntry  

nvRbconfIndex 11.1.230.5.58.2.3.1.1
Index of Rbconf record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbconfDliname 11.1.230.5.58.2.3.1.3
Name of DLI port (dliname)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvRbconfProfname 11.1.230.5.58.2.3.1.4
Name of Prof
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvRbconfRtmethod 11.1.230.5.58.2.3.1.5
default 15
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ibsig(16), direct(17)  

nvRbconfStatus 11.1.230.5.58.2.3.1.6
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvRbpstat 11.1.230.5.58.3
OBJECT IDENTIFIER    

nvRbpstatMaxRec 11.1.230.5.58.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbpstatNumRec 11.1.230.5.58.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbpstatTable 11.1.230.5.58.3.3
Rbpstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRbpstatEntry

nvRbpstatEntry 11.1.230.5.58.3.3.1
Rbpstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRbpstatEntry  

nvRbpstatIndex 11.1.230.5.58.3.3.1.1
Index of Rbpstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbpstatDliname 11.1.230.5.58.3.3.1.2
Name of (dliname)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvRbpstatFlavor 11.1.230.5.58.3.3.1.3
Name
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvRbpstatPstat 11.1.230.5.58.3.3.1.4
Status of Rb port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(2), up(3), disabled(4), down(5)  

nvRbpstatTsstat 11.1.230.5.58.3.3.1.5
Status of Rb port's timeslots. s : means timeslot for synchronization O : means out-of-band signaling - : means no info yet B : means blocked I : means idle M : means in-band signaling (MF) C : means call is up E : means timeslot is in abnormal state D : means port is down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..25)  

nvRbpstatRbsrbdsp 11.1.230.5.58.3.3.1.6
RbsrbDSP which has this ports ob sig channel
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvRbpstatRbstat 11.1.230.5.58.3.3.1.7
status of the ob sig channel for this port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nopipe(1), rbsigsetup(3), rbsigup(4), rbbad(5), dspbad(6), swerr(7)  

nvRbpstatLstatinfo 11.1.230.5.58.3.3.1.8
Information accompanying a LINE_STATUS message
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbpstatLinbadcnt 11.1.230.5.58.3.3.1.9
No. of line_status line_bad msg received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbpstatTsbadcnt 11.1.230.5.58.3.3.1.10
No. of line_status line_bad msg received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbpstatTotisigatt 11.1.230.5.58.3.3.1.11
No. of incoming in-band channels created
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbpstatToticalatt 11.1.230.5.58.3.3.1.12
No. of incoming Rb calls attempted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbpstatToticalest 11.1.230.5.58.3.3.1.13
No. of incoming Rb calls established
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbpstatTotosigatt 11.1.230.5.58.3.3.1.14
No. of outgoing in-band channels created
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbpstatTotocalatt 11.1.230.5.58.3.3.1.15
No. of outgoing R2 calls attempted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbpstatTotocalest 11.1.230.5.58.3.3.1.16
No. of outgoing Rb calls established
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbpstatDtreset 11.1.230.5.58.3.3.1.17
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvRbdspstat 11.1.230.5.58.4
OBJECT IDENTIFIER    

nvRbdspstatMaxRec 11.1.230.5.58.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbdspstatNumRec 11.1.230.5.58.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbdspstatTable 11.1.230.5.58.4.3
Rbdspstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRbdspstatEntry

nvRbdspstatEntry 11.1.230.5.58.4.3.1
Rbdspstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRbdspstatEntry  

nvRbdspstatIndex 11.1.230.5.58.4.3.1.1
Index of Rbdspstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbdspstatDevname 11.1.230.5.58.4.3.1.2
Name of DSP device used for this RbDSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvRbdspstatFlavor 11.1.230.5.58.4.3.1.3
flavor
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvRbdspstatStat 11.1.230.5.58.4.3.1.4
Health status of RbDSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rbdspinit(1), rbdspconfig(2), rbdspup(3), rbdspdown(4), rbdspfail(5), tsmalfunc(6)  

nvRbdspstatNumrbpipe 11.1.230.5.58.4.3.1.5
Num of rbpipe sig channels assigned to this RbDSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbdspstatNumibchn 11.1.230.5.58.4.3.1.6
Num of ib channels assigned to this RbDSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbdspstatUnusedchn 11.1.230.5.58.4.3.1.7
Num of avaialble timeslots on this RbDSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbdspstatTotrbpipe 11.1.230.5.58.4.3.1.8
Cumulative total of rbpipe channels assigned to this RbDSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbdspstatTotibchn 11.1.230.5.58.4.3.1.9
Cumulative total of ib channels assigned to this RbDSP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nvRbdspstatDtreset 11.1.230.5.58.4.3.1.10
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvRbcstat 11.1.230.5.58.5
OBJECT IDENTIFIER    

nvRbcstatMaxRec 11.1.230.5.58.5.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbcstatNumRec 11.1.230.5.58.5.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbcstatTable 11.1.230.5.58.5.3
Rbcstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRbcstatEntry

nvRbcstatEntry 11.1.230.5.58.5.3.1
Rbcstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRbcstatEntry  

nvRbcstatIndex 11.1.230.5.58.5.3.1.1
Index of Rbcstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbcstatRbport 11.1.230.5.58.5.3.1.2
RBCONF record number of port carring timeslot of this call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvRbcstatTimeslot 11.1.230.5.58.5.3.1.3
Timeslot number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvRbcstatIbrbdsp 11.1.230.5.58.5.3.1.4
RBDSPSTAT recnum of RBDSP carrying this circuit
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbcstatCstat 11.1.230.5.58.5.3.1.5
Current status of this timeslot
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ibnocircuit(1), ibcircsetup(2), ibcircerr(3), ibcircfail(4), ibdspmalf(5), norbdspts(6), ibdecode(7), ibcomplete(8), dirrouting(9), ibabnterm(10), ibconrej(11), rejected(12), datacall(13), cleared(14)  

nvRbcstatDirection 11.1.230.5.58.5.3.1.6
incoming or outgoing call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2)  

nvRbcstatReason 11.1.230.5.58.5.3.1.7
For failed calls reason for the failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

nvRbcstatCallnum 11.1.230.5.58.5.3.1.8
Sequence number of this call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbcstatCallednum 11.1.230.5.58.5.3.1.9
Called number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..25)  

nvRbcstatCallingnum 11.1.230.5.58.5.3.1.10
Calling number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..25)  

nvRbprof 11.1.230.5.58.6
OBJECT IDENTIFIER    

nvRbprofMaxRec 11.1.230.5.58.6.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbprofNumRec 11.1.230.5.58.6.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbprofTable 11.1.230.5.58.6.3
Rbprof file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvRbprofEntry

nvRbprofEntry 11.1.230.5.58.6.3.1
Rbprof record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvRbprofEntry  

nvRbprofIndex 11.1.230.5.58.6.3.1.1
Index of Rbprof record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvRbprofProfname 11.1.230.5.58.6.3.1.2
Name of RB flavor (profname)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

nvRbprofSuffix 11.1.230.5.58.6.3.1.3
Abbreviation of RB flavor (suffix)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..4)  

nvRbprofSigtype 11.1.230.5.58.6.3.1.4
Support for CD bits (cdbits) Default value 2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e-and-m(2), loop(3), ground(4)  

nvRbprofRlcf 11.1.230.5.58.6.3.1.5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), yes(2), no(3)  

nvRbprofLcfo 11.1.230.5.58.6.3.1.6
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notapp(1), yes(2), no(3)  

nvRbprofWinklen 11.1.230.5.58.6.3.1.7
Support for CLEAR_ACK (clearack)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRbprofMfdelay 11.1.230.5.58.6.3.1.8
Duration in ms between wink and inband (mfdelay).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRbprofDisconlen 11.1.230.5.58.6.3.1.9
Duration of EM disconnection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRbprofIbsigtype 11.1.230.5.58.6.3.1.10
Inband signaling protocol to use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dtmf(2)  

nvRbprofDtmftmout 11.1.230.5.58.6.3.1.11
DTMF signal timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvRbprofDtmfon 11.1.230.5.58.6.3.1.12
DTMF signal ON time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..100  

nvRbprofDtmfoff 11.1.230.5.58.6.3.1.13
DTMF signal OFF time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..100  

nvRbprofStatus 11.1.230.5.58.6.3.1.14
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvL2tpconf 11.1.230.5.70.1
OBJECT IDENTIFIER    

nvL2tpconfMaxRec 11.1.230.5.70.1.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpconfNumRec 11.1.230.5.70.1.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpconfTable 11.1.230.5.70.1.3
l2tpconf file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvL2tpconfEntry

nvL2tpconfEntry 11.1.230.5.70.1.3.1
l2tpconf record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvL2tpconfEntry  

nvL2tpconfIndex 11.1.230.5.70.1.3.1.1
Index of L2tpconf record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpconfAdminStat 11.1.230.5.70.1.3.1.2
enable l2tp protocol stack.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nvL2tpconfAckTimout 11.1.230.5.70.1.3.1.3
acknowlege timeout.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvL2tpconfInactivty 11.1.230.5.70.1.3.1.4
Inactivty interval for hello msg.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvL2tpconfRetrans 11.1.230.5.70.1.3.1.5
max retransmit before closing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvL2tpconfIdle 11.1.230.5.70.1.3.1.6
max idle prior to closing tunnel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvL2tpconfStatus 11.1.230.5.70.1.3.1.7
Operation status. Add the record to the table (valid) or delete the record from the table (invalid).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvL2tpstat 11.1.230.5.70.2
OBJECT IDENTIFIER    

nvL2tpstatMaxRec 11.1.230.5.70.2.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatNumRec 11.1.230.5.70.2.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatTable 11.1.230.5.70.2.3
L2tpstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvL2tpstatEntry

nvL2tpstatEntry 11.1.230.5.70.2.3.1
L2tpstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvL2tpstatEntry  

nvL2tpstatIndex 11.1.230.5.70.2.3.1.1
Index of L2tpstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatActivTnls 11.1.230.5.70.2.3.1.2
number of currently active tunnel
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatActivSns 11.1.230.5.70.2.3.1.3
number of currently active session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatMlfrmPkt 11.1.230.5.70.2.3.1.4
number of malformed packets received by l2tp
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatCtrlRecv 11.1.230.5.70.2.3.1.5
number of control packet received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatCtrlOofW 11.1.230.5.70.2.3.1.6
number of control packet received outside of window
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatCtrlOofS 11.1.230.5.70.2.3.1.7
number of control packet received out of sequence
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatCtrlSend 11.1.230.5.70.2.3.1.8
number of control packet sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatDataRecv 11.1.230.5.70.2.3.1.9
number of data packet received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatDataSend 11.1.230.5.70.2.3.1.10
number of data packet sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatTnlUnav 11.1.230.5.70.2.3.1.11
tunnels not created due to unavailable resources
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatSessUnav 11.1.230.5.70.2.3.1.12
number session not created due to unavailable resources
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatProtVrsn 11.1.230.5.70.2.3.1.13
l2tp protocol version number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpstatDtreset 11.1.230.5.70.2.3.1.20
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvL2tptstat 11.1.230.5.70.3
OBJECT IDENTIFIER    

nvL2tptstatMaxRec 11.1.230.5.70.3.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatNumRec 11.1.230.5.70.3.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatTable 11.1.230.5.70.3.3
L2tptstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvL2tptstatEntry

nvL2tptstatEntry 11.1.230.5.70.3.3.1
L2tptstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvL2tptstatEntry  

nvL2tptstatIndex 11.1.230.5.70.3.3.1.1
Index of L2tptstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatLocalTnID 11.1.230.5.70.3.3.1.2
Local Tunnel Id of the LAC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatRemotTnID 11.1.230.5.70.3.3.1.3
Local call id of the LNS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatLocalWSiz 11.1.230.5.70.3.3.1.4
Remote Call Id of the LNS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatRemotWSiz 11.1.230.5.70.3.3.1.5
Call Serial Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatRmtIPaddr 11.1.230.5.70.3.3.1.6
Local Window Size
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

nvL2tptstatRmtHstNme 11.1.230.5.70.3.3.1.7
PPP stat file record
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvL2tptstatTunlState 11.1.230.5.70.3.3.1.8
Received Data Packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(1), idle(2), cnnting(3), estb(4), disconn(5)  

nvL2tptstatRecvCtrl 11.1.230.5.70.3.3.1.9
Received Control Packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatRecvData 11.1.230.5.70.3.3.1.10
Received Data Packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatSendCtrl 11.1.230.5.70.3.3.1.11
Sent Control Packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatSendData 11.1.230.5.70.3.3.1.12
Sent Data Packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tptstatDtreset 11.1.230.5.70.3.3.1.20
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvL2tpsstat 11.1.230.5.70.4
OBJECT IDENTIFIER    

nvL2tpsstatMaxRec 11.1.230.5.70.4.1
total number of records allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatNumRec 11.1.230.5.70.4.2
number of records in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatTable 11.1.230.5.70.4.3
l2tpsstat file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvL2tpsstatEntry

nvL2tpsstatEntry 11.1.230.5.70.4.3.1
l2tpsstat record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvL2tpsstatEntry  

nvL2tpsstatIndex 11.1.230.5.70.4.3.1.1
Index of L2tpsstat record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatTunnelID 11.1.230.5.70.4.3.1.2
Local Tunnel Id of the LAC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatLclCallID 11.1.230.5.70.4.3.1.3
Local Call Id of the LNS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatRmtCallID 11.1.230.5.70.4.3.1.4
Remote Call Id of the LNS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatCallSN 11.1.230.5.70.4.3.1.5
Call Serial Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatState 11.1.230.5.70.4.3.1.6
State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(1), idle(2), cnnting(3), estb(4), disconn(5)  

nvL2tpsstatDeviceNum 11.1.230.5.70.4.3.1.7
Device Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatDataRecv 11.1.230.5.70.4.3.1.8
Received Data Packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatDataSend 11.1.230.5.70.4.3.1.9
Sent Data Packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvL2tpsstatDtreset 11.1.230.5.70.4.3.1.15
date & time statistics last reset
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

nvTrapS0 11.1.230.5.64.1
S0: 0-80 character trap string
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

nvTrapS1 11.1.230.5.64.2
S1: 0-80 character trap string
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

nvTrapS2 11.1.230.5.64.3
S2: 0-80 character trap string
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

nvTrapN0 11.1.230.5.64.4
N0: numeric trap value
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTrapN1 11.1.230.5.64.5
N1: numeric trap value
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTrapN2 11.1.230.5.64.6
N2: numeric trap value
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTrapconf 11.1.230.5.64.7
OBJECT IDENTIFIER    

nvTrapconfMaxRec 11.1.230.5.64.7.1
total number of traps that have been defined
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTrapconfNumRec 11.1.230.5.64.7.2
number of highest record in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTrapconfTable 11.1.230.5.64.7.3
Nevada Traps Lists
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvTrapconfEntry

nvTrapconfEntry 11.1.230.5.64.7.3.1
Nevada Trapconf definition.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvTrapconfEntry  

nvTrapconfIndex 11.1.230.5.64.7.3.1.1
Index for traps.. for config purpose
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTrapconfTrapId 11.1.230.5.64.7.3.1.2
The assigned enterprise trap number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvTrapconfDesc 11.1.230.5.64.7.3.1.3
The Description of the specific trap
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..256)  

nvTrapconfStatus 11.1.230.5.64.7.3.1.4
Operation status of the Trap. Use enable to generate trap and disable otherwise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

nvReboot 11.1.230.5.65.1
Reboot Nevada.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), reboot(2), failed(3)  

nvWriteConfig 11.1.230.5.65.2
Write Configuration -save-
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER write(1), executing(2), successful(3), failed(4)  

nvDate 11.1.230.5.65.3
Set Nevada date/time. The Format is as follows yyyy mm dd hh mm ss
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..25)  

nvWriteRoot 11.1.230.5.65.4
Write Mediastat file (root)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER write(1), executing(2), successful(3), failed(4)  

nvStartScript 11.1.230.5.65.5
Script Number to Start
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nvString 11.1.230.5.65.6
OBJECT IDENTIFIER    

nvStringMaxRec 11.1.230.5.65.6.1
total number of records available for all strings allowed in database file.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvStringNumRec 11.1.230.5.65.6.2
number of highest record in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvStringTable 11.1.230.5.65.6.3
Nevada String List file.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvStringEntry

nvStringEntry 11.1.230.5.65.6.3.1
Nevada String record.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NvStringEntry  

nvStringIndex 11.1.230.5.65.6.3.1.1
Index of Nevada String record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nvStringData 11.1.230.5.65.6.3.1.2
The data in the specific string, size up to 256
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..256)  

nvStringStatus 11.1.230.5.65.6.3.1.3
Operation status of the record. Use valid to add record to database file and invalid to delete record from database file.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nvTrapDeviceConnected 4352
Probable Cause The port placed or accepted call with the attached device. Probable Effect Nevada has a network connection Recommended Action Network connection is now available for data transfer.
TRAP-TYPE    

nvTrapDeviceDisconnected 4353
Probable Cause The port disconnected with the attached device. Probable Effect Nevada does not have a network connection on the port. Recommended Action Refer stat files itipstat, iticstat, itiustat & portstat.
TRAP-TYPE    

nvTrapDuiportavail 4354
Probable Cause number of available ports at site Probable Effect can place calls Recommended Action place calls
TRAP-TYPE    

nvTrapNoIdlePorts 4355
Probable Cause All available ports are in use Probable Effect No additional users will be able to call in. Recommended Action Add more ports to the particular site.
TRAP-TYPE    

nvTrapDatatimerexpird 4359
Probable Cause Data mode timer expired Probable Effect Recommended Action
TRAP-TYPE    

nvTrapDUIDown 4365
Probable Cause Both DUI Circuits down. Probable Effect Can not accept calls. Recommended Action
TRAP-TYPE    

nvTrapDatabaseUpPrimary 4377
LSERVER: Database Up: primary NUA `S0`
TRAP-TYPE    

nvTrapDatabaseUpSecondary 4378
LSERVER: Database Up: secondary NUA `S0`
TRAP-TYPE    

nvTrapLinkNotReady 4668
Probable Cause X.25 detected that the link is down. Probable Effect Data transfer over the specified link not possible Recommended Action Correct the Physical connection and/or configuration
TRAP-TYPE    

nvTrapLinkReady 4669
Probable Cause X.25 detected that the link has come up. Probable Effect Data transfer over the specified link possible Recommended Action New calls can now be established on this link
TRAP-TYPE    

nvTrapAlternateConfig 5635
Nevada running alternate config on side `n0`
TRAP-TYPE    

nvTrapDbautosave 5636
data base auto save
TRAP-TYPE    

nvTrapDbCrcError 5637
Nevada CRC error on database
TRAP-TYPE    

nvTrapDbsavecount 5638
save count is zero
TRAP-TYPE    

nvTrapLocalDatabaseChanged 5639
Nevada local database has been changed
TRAP-TYPE    

nvTrapRateIncreasedToL1 5640
Nevada statistics rate increased to level 1
TRAP-TYPE    

nvTrapRateIncreasedToL2 5641
Nevada statistics rate increased to level 2
TRAP-TYPE    

nvTrapRateDecreasedBelowL1 5642
Nevada statistics rate decrease to below level 1
TRAP-TYPE    

nvTrapRateDecreasedBelowL2 5643
Nevada statistics rate decrease to below level 2
TRAP-TYPE    

nvTrapReachedStatus 5644
Nevada status value reached
TRAP-TYPE    

nvTrapLeftStatus 5645
Nevada status value no longer met
TRAP-TYPE    

nvTrapFramerfailaction 5652
Probable Cause framer failed to do the required action Probable Effect Recommended Action
TRAP-TYPE    

nvTrapFramerfailed 5653
Probable Cause framer card in the indicated slot failed to do the requested action Probable Effect no traffic will flow Recommended Action check hardware and software configuration
TRAP-TYPE    

nvTrapFrPortUp 11520
Nevada Frame Relay Interface up ready
TRAP-TYPE    

nvTrapFrPortDown 11521
Nevada Frame Relay Interface down not-ready
TRAP-TYPE    

nvTrapFrLMIError 11522
Probable Cause The specified frame relay interface has detected LMI error. Probable Effect Stops PVC traffic. Recommended Action Wait for LMI to enter normal state to resume PVC traffic.
TRAP-TYPE    

nvTrapFrLMINormal 11523
Probable Cause The specified frame relay interface has found LMI in normal state. Probable Effect Enables PVC traffic to resume. Recommended Action The FRI is available for data transfer.
TRAP-TYPE    

nvTrapFrAllDLCIsUp 11524
Probable Cause All DLCIs on the FRI are functional. Probable Effect All FRPVCs enter data transfer state. Recommended Action All FRPVCs are available for data transfer.
TRAP-TYPE    

nvTrapFrDLCIsDown 11525
Probable Cause One or more DLCIs on the FRI not functional. Probable Effect Data transfer will stop on the FRPVC that has gone down. Recommended Action Refer stat files fristat, frvcstat and frstat.
TRAP-TYPE    

nvTrapElxUp 12032
Probable Cause ELX has gone up. Probable Effect Data can be exchanged Recommended Action Pass data through
TRAP-TYPE    

nvTrapElxDown 12033
Probable Cause ELX has gone down. Probable Effect Data can not be exchanged Recommended Action Correct configuration, cable connection or the hardware setup.
TRAP-TYPE    

nvTrapPppLcpUp 14848
Probable Cause The Link Control Protocol (LCP) has gone up. Probable Effect The link is configured, tested and available for higher-level protocols such as IPCP (Internet Protocol Control Protocol). Recommended Action The PPP link is now available for higher-level protocol such as IPCP.
TRAP-TYPE    

nvTrapPppLcpDown 14849
Probable Cause The Link Control Protocol (LCP) has gone down. Probable Effect The link is not configured and is not available for higher-level protocols such as IPCP (Internet Protocol Control Protocol). Recommended Action Refer PPP statfile pppstat.
TRAP-TYPE    

nvTrapPppIpcpOnLcpUp 14850
Probable Cause The IP Control Protocol (IPCP) has gone up. Probable Effect The Network Layer Protocol is selected and datagrams can be sent. Recommended Action The PPP link is now available for datagram traffic.
TRAP-TYPE    

nvPppIpcpOnLcpDown 14851
Probable Cause The IP Control Protocol (IPCP) has gone down. Probable Effect The Network Layer Protocol is not selected and datagrams can not be sent. Recommended Action Refer PPP statfile pppstat.
TRAP-TYPE    

nvTrapPriDataLayerUp 15136
Probable Cause ISDN Data Layer Up PRI is functional on the DLI Probable Effect Data Channel responding. Recommended Action Unit is ready to receive ISDN calls
TRAP-TYPE    

nvTrapPriDataLayerDn 15137
Probable Cause ISDN Data Layer Down PRI is Not functional on the DLI Probable Effect Data Channel not responding bchannel calls will fail Recommended Action Test the DLI and check associated Config in CDLI and PRICONF
TRAP-TYPE    

nvTrapPppLcpNetworkPhase 15500
Probable Cause The LCP protocol has entered the network phase on the PPP link Probable Effect Network layer protocols such as IPCP can now exchange packets on the link Recommended Action None
TRAP-TYPE    

nvTrapPppLcpNetworkdown 15501
Probable Cause The LCP protocol is down on the network phase on the PPP link Probable Effect Network layer protocols such as IPCP can not exchange packets on the link Recommended Action
TRAP-TYPE    

nvTrapPppMpLinkAdded 15504
Probable Cause A PPP link has been added to a multilink bundle Probable Effect Greater bandwidth is available on the bundle Recommended Action None required. Informational only
TRAP-TYPE    

nvTrapPppMpLinkDropped 15505
Probable Cause A PPP link has been dropped from a multilink bundle Probable Effect The bandwidth for the bundle has been reduced. If this was the last link in the bundle the bundle will be closed Recommended Action None required, informational only
TRAP-TYPE    

nvTrapDSPMFailedModemThresh1 16896
Probable Cause Number of Modem failures has reached the configured threshold one Probable Effect Modem failure results in failed calls Recommended Action check modem hardware/configuration
TRAP-TYPE    

nvTrapDSPMFailedModemThresh2 16897
Probable Cause Number of Modem failures has reached the configured threshold two Probable Effect Modem failure results in failed calls Recommended Action check modem hardware/configuration
TRAP-TYPE    

nvTrapDSPMFailedModemThresh3 16898
Probable Cause Number of Modem failures has reached the configured threshold three Probable Effect Modem failure results in failed calls Recommended Action check modem hardware/configuration
TRAP-TYPE    

nvTrapDSPRFailed 16899
Probable Cause DSPR has failed. Probable Effect DSPR card has failed -- hardware resources failure Recommended Action Replace the DSPR card
TRAP-TYPE    

nvTrapISDNFailedCalls 16640
Probable Cause Number of ISDN calls failure have reached the configured threshold Probable Effect ISDN failure -- results in failed ISDN calls Recommended Action check the ISDN IO cards/service provider/hardware
TRAP-TYPE    

nvTrapFRAMERFailed 17664
Probable Cause FRAMER card failure Probable Effect FRAMER card failure -- system failure Recommended Action replace the framer card
TRAP-TYPE    

nvTrapQDLIFailed 17920
Probable Cause QDLI card has failed Probable Effect QDLI card has failed Recommended Action None required, informational only
TRAP-TYPE    

nvTrapRemovedCard 17940
Probable Cause a card has been deleted in the indicated slot Probable Effect a card has been deleted -- hotswap Recommended Action None required, informational only
TRAP-TYPE    

nvTrapCardInserted 17950
Probable Cause a card has been inserted in the indicated slot Probable Effect a card has been inserted -- hotswap Recommended Action None required, informational only
TRAP-TYPE