UX25-MIB

File: UX25-MIB.mib (62327 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises experimental IpAddress
TimeTicks Gauge Counter
DisplayString OBJECT-TYPE

Defined Types

Ux25AdmnChannelEntry  
SEQUENCE    
  ux25AdmnChanneIndex INTEGER
  ux25AdmnNetMode INTEGER
  ux25AdmnProtocolVersion INTEGER
  ux25AdmnInterfaceMode INTEGER
  ux25AdmnLowestPVCVal INTEGER
  ux25AdmnHighestPVCVal INTEGER
  ux25AdmnChannelLIC INTEGER
  ux25AdmnChannelHIC INTEGER
  ux25AdmnChannelLTC INTEGER
  ux25AdmnChannelHTC INTEGER
  ux25AdmnChannelLOC INTEGER
  ux25AdmnChannelHOC INTEGER

Ux25AdmnClassEntry  
SEQUENCE    
  ux25AdmnClassIndex INTEGER
  ux25AdmnLocMaxThruPutClass INTEGER
  ux25AdmnRemMaxThruPutClass INTEGER
  ux25AdmnLocDefThruPutClass INTEGER
  ux25AdmnRemDefThruPutClass INTEGER
  ux25AdmnLocMinThruPutClass INTEGER
  ux25AdmnRemMinThruPutClass INTEGER
  ux25AdmnThclassNegToDef INTEGER
  ux25AdmnThclassType INTEGER
  ux25AdmnThclassWinMap DisplayString
  ux25AdmnThclassPackMap DisplayString

Ux25AdmnPacketEntry  
SEQUENCE    
  ux25AdmnPacketIndex INTEGER
  ux25AdmnPktSequencing INTEGER
  ux25AdmnLocMaxPktSize INTEGER
  ux25AdmnRemMaxPktSize INTEGER
  ux25AdmnLocDefPktSize INTEGER
  ux25AdmnRemDefPktSize INTEGER
  ux25AdmnLocMaxWinSize INTEGER
  ux25AdmnRemMaxWinSize INTEGER
  ux25AdmnLocDefWinSize INTEGER
  ux25AdmnRemDefWinSize INTEGER
  ux25AdmnMaxNSDULimit INTEGER
  ux25AdmnAccNoDiagnostic INTEGER
  ux25AdmnUseDiagnosticPacket INTEGER
  ux25AdmnItutClearLen INTEGER
  ux25AdmnBarDiagnosticPacket INTEGER
  ux25AdmnDiscNzDiagnostic INTEGER
  ux25AdmnAcceptHexAdd INTEGER
  ux25AdmnBarNonPrivilegeListen INTEGER
  ux25AdmnIntlAddrRecognition INTEGER
  ux25AdmnDnic DisplayString
  ux25AdmnIntlPrioritized INTEGER
  ux25AdmnPrtyEncodeCtrl INTEGER
  ux25AdmnPrtyPktForcedVal INTEGER
  ux25AdmnSrcAddrCtrl INTEGER
  ux25AdmnDbitInAccept INTEGER
  ux25AdmnDbitOutAccept INTEGER
  ux25AdmnDbitInData INTEGER
  ux25AdmnDbitOutData INTEGER

Ux25AdmnSubscriberEntry  
SEQUENCE    
  ux25AdmnSubscriberIndex INTEGER
  ux25AdmnSubCugIaoa INTEGER
  ux25AdmnSubCugPref INTEGER
  ux25AdmnSubCugoa INTEGER
  ux25AdmnSubCugia INTEGER
  ux25AdmnCugFormat INTEGER
  ux25AdmnBarInCug INTEGER
  ux25AdmnSubExtended INTEGER
  ux25AdmnBarExtended INTEGER
  ux25AdmnSubFstSelNoRstrct INTEGER
  ux25AdmnSubFstSelWthRstrct INTEGER
  ux25AdmnAccptRvsChrgng INTEGER
  ux25AdmnSubLocChargePrevent INTEGER
  ux25AdmnSubToaNpiFormat INTEGER
  ux25AdmnBarToaNpiFormat INTEGER
  ux25AdmnSubNuiOverride INTEGER
  ux25AdmnBarInCall INTEGER
  ux25AdmnBarOutCall INTEGER

Ux25AdmnTimerEntry  
SEQUENCE    
  ux25AdmnTimerIndex INTEGER
  ux25AdmnAckDelay INTEGER
  ux25AdmnRstrtTime INTEGER
  ux25AdmnCallTime INTEGER
  ux25AdmnRstTime INTEGER
  ux25AdmnClrTime INTEGER
  ux25AdmnWinStatTime INTEGER
  ux25AdmnWinRotTime INTEGER
  ux25AdmnIntrptTime INTEGER
  ux25AdmnIdleValue INTEGER
  ux25AdmnConnectValue INTEGER
  ux25AdmnRstrtCnt INTEGER
  ux25AdmnRstCnt INTEGER
  ux25AdmnClrCnt INTEGER
  ux25AdmnLocalDelay INTEGER
  ux25AdmnAccessDelay INTEGER

Ux25OperChannelEntry  
SEQUENCE    
  ux25OperChannelIndex INTEGER
  ux25OperNetMode INTEGER
  ux25OperProtocolVersion INTEGER
  ux25OperInterfaceMode INTEGER
  ux25OperLowestPVCVal INTEGER
  ux25OperHighestPVCVal INTEGER
  ux25OperChannelLIC INTEGER
  ux25OperChannelHIC INTEGER
  ux25OperChannelLTC INTEGER
  ux25OperChannelHTC INTEGER
  ux25OperChannelLOC INTEGER
  ux25OperChannelHOC INTEGER

Ux25OperClassEntry  
SEQUENCE    
  ux25OperClassIndex INTEGER
  ux25OperLocMaxThruPutClass INTEGER
  ux25OperRemMaxThruPutClass INTEGER
  ux25OperLocDefThruPutClass INTEGER
  ux25OperRemDefThruPutClass INTEGER
  ux25OperLocMinThruPutClass INTEGER
  ux25OperRemMinThruPutClass INTEGER
  ux25OperThclassNegToDef INTEGER
  ux25OperThclassType INTEGER
  ux25OperThclassWinMap DisplayString
  ux25OperThclassPackMap DisplayString

Ux25OperPacketEntry  
SEQUENCE    
  ux25OperPacketIndex INTEGER
  ux25OperPktSequencing INTEGER
  ux25OperLocMaxPktSize INTEGER
  ux25OperRemMaxPktSize INTEGER
  ux25OperLocDefPktSize INTEGER
  ux25OperRemDefPktSize INTEGER
  ux25OperLocMaxWinSize INTEGER
  ux25OperRemMaxWinSize INTEGER
  ux25OperLocDefWinSize INTEGER
  ux25OperRemDefWinSize INTEGER
  ux25OperMaxNSDULimit INTEGER
  ux25OperAccNoDiagnostic INTEGER
  ux25OperUseDiagnosticPacket INTEGER
  ux25OperItutClearLen INTEGER
  ux25OperBarDiagnosticPacket INTEGER
  ux25OperDiscNzDiagnostic INTEGER
  ux25OperAcceptHexAdd INTEGER
  ux25OperBarNonPrivilegeListen INTEGER
  ux25OperIntlAddrRecognition INTEGER
  ux25OperDnic DisplayString
  ux25OperIntlPrioritized INTEGER
  ux25OperPrtyEncodeCtrl INTEGER
  ux25OperPrtyPktForcedVal INTEGER
  ux25OperSrcAddrCtrl INTEGER
  ux25OperDbitInAccept INTEGER
  ux25OperDbitOutAccept INTEGER
  ux25OperDbitInData INTEGER
  ux25OperDbitOutData INTEGER

Ux25OperSubscriberEntry  
SEQUENCE    
  ux25OperSubscriberIndex INTEGER
  ux25OperSubCugIaoa INTEGER
  ux25OperSubCugPref INTEGER
  ux25OperSubCugoa INTEGER
  ux25OperSubCugia INTEGER
  ux25OperCugFormat INTEGER
  ux25OperBarInCug INTEGER
  ux25OperSubExtended INTEGER
  ux25OperBarExtended INTEGER
  ux25OperSubFstSelNoRstrct INTEGER
  ux25OperSubFstSelWthRstrct INTEGER
  ux25OperAccptRvsChrgng INTEGER
  ux25OperSubLocChargePrevent INTEGER
  ux25OperSubToaNpiFormat INTEGER
  ux25OperBarToaNpiFormat INTEGER
  ux25OperSubNuiOverride INTEGER
  ux25OperBarInCall INTEGER
  ux25OperBarOutCall INTEGER

Ux25OperTimerEntry  
SEQUENCE    
  ux25OperTimerIndex INTEGER
  ux25OperAckDelay INTEGER
  ux25OperRstrtTime INTEGER
  ux25OperCallTime INTEGER
  ux25OperRstTime INTEGER
  ux25OperClrTime INTEGER
  ux25OperWinStatTime INTEGER
  ux25OperWinRotTime INTEGER
  ux25OperIntrptTime INTEGER
  ux25OperIdleValue INTEGER
  ux25OperConnectValue INTEGER
  ux25OperRstrtCnt INTEGER
  ux25OperRstCnt INTEGER
  ux25OperClrCnt INTEGER
  ux25OperLocalDelay INTEGER
  ux25OperAccessDelay INTEGER

Ux25StatEntry  
SEQUENCE    
  ux25StatIndex INTEGER
  ux25StatCallsRcvd INTEGER
  ux25StatCallsSent INTEGER
  ux25StatCallsRcvdEstab INTEGER
  ux25StatCallsSentEstab INTEGER
  ux25StatDataPktsRcvd INTEGER
  ux25StatDataPktsSent INTEGER
  ux25StatRestartsRcvd INTEGER
  ux25StatRestartsSent INTEGER
  ux25StatRcvrNotRdyRcvd INTEGER
  ux25StatRcvrNotRdySent INTEGER
  ux25StatRcvrRdyRcvd INTEGER
  ux25StatRcvrRdySent INTEGER
  ux25StatResetsRcvd INTEGER
  ux25StatResetsSent INTEGER
  ux25StatDiagPktsRcvd INTEGER
  ux25StatDiagPktsSent INTEGER
  ux25StatIntrptPktsRcvd INTEGER
  ux25StatIntrptPktsSent INTEGER
  ux25StatPVCsInDatTrnsfrState INTEGER
  ux25StatSVCsInDatTrnsfrState INTEGER

Defined Values

usr 1.3.6.1.4.1.429
OBJECT IDENTIFIER    

nas 1.3.6.1.4.1.429.1
OBJECT IDENTIFIER    

ux25 1.3.6.1.4.1.429.1.10
OBJECT IDENTIFIER    

ux25AdmnChannelTable 1.3.6.1.4.1.429.1.10.1
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25AdmnChannelEntry

ux25AdmnChannelEntry 1.3.6.1.4.1.429.1.10.1.1
Entries of ux25AdmnChannelTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25AdmnChannelEntry  

ux25AdmnChanneIndex 1.3.6.1.4.1.429.1.10.1.1.1
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25AdmnNetMode 1.3.6.1.4.1.429.1.10.1.1.2
Selects the network protocol to be used. Default=x2584(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x25Llc(1), x2588(2), x2584(3), x2580(4), pss(5), austpac(6), datapac(7), ddn(8), telenet(9), transpac(10), tymnet(11), datexP(12), ddxP(13), venusP(14), accunet(15), itapac(16), datapak(17), datanet(18), dcs(19), telepac(20), fDatapac(21), finpac(22), pacnet(23), luxpac(24)  

ux25AdmnProtocolVersion 1.3.6.1.4.1.429.1.10.1.1.3
Determines the X.25 protocol version being used on the network. A network mode of X25_LLC overides this field to the 1984 standard. Default=x25ver84(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x25ver80(1), x25ver84(2), x25ver88(3)  

ux25AdmnInterfaceMode 1.3.6.1.4.1.429.1.10.1.1.4
Indicates the DTE/DCE nature of the link. The DXE parameter is resolved using ISO 8208 for DTE-DTE operation. Default=dteMode(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dceMode(1), dteMode(2), dxeMode(3)  

ux25AdmnLowestPVCVal 1.3.6.1.4.1.429.1.10.1.1.5
Low end of the Permanent Virtual Circuit range. If both the Low and High ends of the range are set to 0 there are no PVCs. Default=0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

ux25AdmnHighestPVCVal 1.3.6.1.4.1.429.1.10.1.1.6
High end of the Permanent Virtual Circuit range. If both the Low and High ends of the range are set to 0 there are no PVCs. Default=0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

ux25AdmnChannelLIC 1.3.6.1.4.1.429.1.10.1.1.7
Low end of the one-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no one-way incoming channels. Default=0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

ux25AdmnChannelHIC 1.3.6.1.4.1.429.1.10.1.1.8
High end of the one-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no one-way incoming channels. Default=0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

ux25AdmnChannelLTC 1.3.6.1.4.1.429.1.10.1.1.9
Low end of the two-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no two-way incoming channels. Default=1024.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

ux25AdmnChannelHTC 1.3.6.1.4.1.429.1.10.1.1.10
High end of the two-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no two-way incoming channels. Default=1087.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

ux25AdmnChannelLOC 1.3.6.1.4.1.429.1.10.1.1.11
Low end of the one-way outgoing logical channel. If both Low and High ends of the channel are set to 0, there are no one-way outgoing channels. Default=0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

ux25AdmnChannelHOC 1.3.6.1.4.1.429.1.10.1.1.12
High end of the one-way outgoing logical channel. If both Low and High ends of the channel are set to 0, there are no one-way outgoing channels. Default=0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

ux25AdmnClassTable 1.3.6.1.4.1.429.1.10.2
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25AdmnClassEntry

ux25AdmnClassEntry 1.3.6.1.4.1.429.1.10.2.1
Entries of ux25AdmnClassTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25AdmnClassEntry  

ux25AdmnClassIndex 1.3.6.1.4.1.429.1.10.2.1.1
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25AdmnLocMaxThruPutClass 1.3.6.1.4.1.429.1.10.2.1.2
The maximum value of the throughput class Quality of Service parameter which is supported. According to ISO 8208 this parameter is bounded in the range >=3 and <=12 corresponding to a range 75 to 48000 bits/second. The range supported here is 0 to 15 for non-standard X.25 implementations, which use the Throughput Class Window/Packet Parameters (Group II). Default=12.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25AdmnRemMaxThruPutClass 1.3.6.1.4.1.429.1.10.2.1.3
The maximum value of the throughput class Quality of Service parameter which is supported. According to ISO 8208 this parameter is bounded in the range >=3 and <=12 corresponding to a range 75 to 48000 bits/second. The range supported here is 0 to 15 for non-standard X.25 implementations, which use the Throughput Class Window/Packet Parameters (Group II). Default=12.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25AdmnLocDefThruPutClass 1.3.6.1.4.1.429.1.10.2.1.4
The default throughput class that is defined for the local-to-remote direction. In some networks, such as TELENET, negotiation of throughput class is constrained to be towards a configured default throughput class. In other PSDNs, this value should be set equal to the value of the Maximum Local Throughput Class. Default=12.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25AdmnRemDefThruPutClass 1.3.6.1.4.1.429.1.10.2.1.5
The default throughput class value defined for remote-to-local direction. In some networks, such as TELENET, negotiation of throughput class is constrained to be towards a configured default throughput class. In other PSDNs, this value should be set equal to the value of the Maximum Remote Throughput Class. Default=12.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25AdmnLocMinThruPutClass 1.3.6.1.4.1.429.1.10.2.1.6
According to ISO 8208, the throughput class parameter is defined in the range of >=3 to <=12. Some PSDNs may provide different mapping, in which case, this parameter is the minimum value. Default=3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25AdmnRemMinThruPutClass 1.3.6.1.4.1.429.1.10.2.1.7
According to ISO 8208, the throughput class parameter is defined in the range of >=3 to <=12. Some PSDNs may provide different mapping, in which case, this parameter is the minimum value. Default=3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25AdmnThclassNegToDef 1.3.6.1.4.1.429.1.10.2.1.8
Determines if throughput class negotiation will be used for certain network procedures. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnThclassType 1.3.6.1.4.1.429.1.10.2.1.9
Defines which throughput class encodings can be used to assign packet and window sizes. Some implementations of X.25 do not use the X.25 packet and window negotiation and rely on mapping the throughput class to these parameters. Default=noTcType(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noTcType(1), loNibble(2), highNibble(3), bothNibbles(4)  

ux25AdmnThclassWinMap 1.3.6.1.4.1.429.1.10.2.1.10
The mapping between throughput class and a window parameter. Each number has a range of 1 to 127. Default=3.3.3.3.3.3.3.3.3.3.3.3.3.3.3.3
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(31..63)  

ux25AdmnThclassPackMap 1.3.6.1.4.1.429.1.10.2.1.11
The mapping between the throughput class and a packet parameter. Each number has a range of 4 to 12. Default=7.7.7.7.7.7.7.7.7.7.7.7.7.7.7.7
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(31..47)  

ux25AdmnPacketTable 1.3.6.1.4.1.429.1.10.3
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25AdmnPacketEntry

ux25AdmnPacketEntry 1.3.6.1.4.1.429.1.10.3.1
Entries of ux25AdmnPacketTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25AdmnPacketEntry  

ux25AdmnPacketIndex 1.3.6.1.4.1.429.1.10.3.1.1
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25AdmnPktSequencing 1.3.6.1.4.1.429.1.10.3.1.2
Indicates whether modulo 8 or 128 sequence numbering operates on the network. Default=pktSeq8(16).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pktSeq8(16), pktSeq128(32)  

ux25AdmnLocMaxPktSize 1.3.6.1.4.1.429.1.10.3.1.3
Maximum acceptable size of packets in the local-to-remote direction. On an incoming call, a value for the packet size parameter greater than this value will be negotiated down to an acceptable size when the call is accepted. Default=maxPktSz256(8).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER maxPktSz128(7), maxPktSz256(8), maxPktSz512(9)  

ux25AdmnRemMaxPktSize 1.3.6.1.4.1.429.1.10.3.1.4
Maximum acceptable size of packets in the remote-to-local direction. On an incoming call, a value for the packet size parameter greater than this value will be negotiated down to an acceptable size when the call is accepted. Default=maxPktSz256(8).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER maxPktSz128(7), maxPktSz256(8), maxPktSz512(9)  

ux25AdmnLocDefPktSize 1.3.6.1.4.1.429.1.10.3.1.5
Specifies the value of the default packet size for the direction local-to-remote, which may be nonstandard, provided the value is agreed between the communicating parties on the LAN or between the DTE and DCE. Default=defPktSz256(8).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER defPktSz16(4), defPktSz32(5), defPktSz64(6), defPktSz128(7), defPktSz256(8), defPktSz512(9)  

ux25AdmnRemDefPktSize 1.3.6.1.4.1.429.1.10.3.1.6
Specifies the value of the default packet size for the direction remote-to-local, which may be nonstandard, provided the value is agreed between the communicating parties on the LAN or between the DTE and DCE. Default=defPktSz256(8).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER defPktSz16(4), defPktSz32(5), defPktSz64(6), defPktSz128(7), defPktSz256(8), defPktSz512(9)  

ux25AdmnLocMaxWinSize 1.3.6.1.4.1.429.1.10.3.1.7
Specifies the maximum local window size. NOTE: 127 allowed only for modulo 128 networks. Default=7.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..127  

ux25AdmnRemMaxWinSize 1.3.6.1.4.1.429.1.10.3.1.8
Specifies the maximum remote window size. NOTE: 127 allowed only for modulo 128 networks. Default=7.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..127  

ux25AdmnLocDefWinSize 1.3.6.1.4.1.429.1.10.3.1.9
Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the LAN between the DTE and DCE. NOTE: The sequence numbering scheme affects the range of this parameter. Default=2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

ux25AdmnRemDefWinSize 1.3.6.1.4.1.429.1.10.3.1.10
Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the LAN between the DTE and DCE. NOTE: The sequence numbering scheme affects the range of this parameter. Default=2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

ux25AdmnMaxNSDULimit 1.3.6.1.4.1.429.1.10.3.1.11
The default maximum length beyond which concatenation is stopped and data currently held is passed to the Network Service user. Default=256.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnAccNoDiagnostic 1.3.6.1.4.1.429.1.10.3.1.12
Allow the omission of the diagnostic byte in incoming RESTART, CLEAR and RESET INDICATION packets. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnUseDiagnosticPacket 1.3.6.1.4.1.429.1.10.3.1.13
Use diagnostic packets. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnItutClearLen 1.3.6.1.4.1.429.1.10.3.1.14
Restrict the length of a CLEAR INDICATION to 5 bytes and a CLEAR CONFIRM to 3 bytes. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnBarDiagnosticPacket 1.3.6.1.4.1.429.1.10.3.1.15
Bar diagnostic packets. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnDiscNzDiagnostic 1.3.6.1.4.1.429.1.10.3.1.16
Discard all diagnostic packets on a non-zero LCN. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnAcceptHexAdd 1.3.6.1.4.1.429.1.10.3.1.17
Allow DTE addresses to contain hexadecimal digits. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnBarNonPrivilegeListen 1.3.6.1.4.1.429.1.10.3.1.18
Disallow a non-privileged user (i.e without superuser privilege) from listening for incoming calls. Default=enable(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnIntlAddrRecognition 1.3.6.1.4.1.429.1.10.3.1.19
Determine whether outgoing international calls are to be accepted. The values and their interpretation are: 1 - International calls are not distinguished. 2 - The DNIC of the called DTE address is examined and compared to that held in the psdn_local members dnic1 and dnic2. A mismatch implies an international call. 3 - International calls are distinguished by having a '1' prefix on the DTE address. 4 - International calls are distinguished by having a '0' prefix on the DTE address. Default=notDistinguished(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notDistinguished(1), examineDnic(2), prefix1(3), prefix0(4)  

ux25AdmnDnic 1.3.6.1.4.1.429.1.10.3.1.20
This field contains the first four digits of DNIC and is only used when ux25AdmnIntlAddrRecognition is set to examineDnic(2). Note this field must contain exactly four BCD digits. Default=0000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(4..4)  

ux25AdmnIntlPrioritized 1.3.6.1.4.1.429.1.10.3.1.21
Determine whether some prioritizing method is to used for international calls and is used in conjuction with ux25AdmnPrtyEncodeCtrl and ux25AdmnPrtyPktForced value. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnPrtyEncodeCtrl 1.3.6.1.4.1.429.1.10.3.1.22
Describes how the priority request is to be encoded for this PSDN. Default=x2588(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x2588(1), datapacPriority76(2), datapacTraffic80(3)  

ux25AdmnPrtyPktForcedVal 1.3.6.1.4.1.429.1.10.3.1.23
If this entry is other than prioPktSz1(1) all priority call requests and incoming calls should have the associated packet size parameter forced to this value. Note that the actual packet size is 2 to the power of this parameter. Default=prioPktSz1(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER prioPktSz0(1), prioPktSz4(5), prioPktSz5(6), prioPktSz6(7), prioPktSz7(8), prioPktSz8(9), prioPktSz9(10), prioPktSz10(11), prioPktSz11(12), prioPktSz12(13)  

ux25AdmnSrcAddrCtrl 1.3.6.1.4.1.429.1.10.3.1.24
Provide a means to override or set the calling address in outgoing call requests for this PSDN. Default=noSaCntrl(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noSaCntrl(1), omitDte(2), useLocal(3), forceLocal(4)  

ux25AdmnDbitInAccept 1.3.6.1.4.1.429.1.10.3.1.25
Defines the action to take when a Call Accept is received with the D-bit set and there is no local D-bit support. Default=clearCall(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER leaveDbit(1), zeroDbit(2), clearCall(3)  

ux25AdmnDbitOutAccept 1.3.6.1.4.1.429.1.10.3.1.26
Defines the action to take when the remote user sends a Call Accept with the D-bit set when the local user did not request use of the D-bit. Default=clearCall(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER leaveDbit(1), zeroDbit(2), clearCall(3)  

ux25AdmnDbitInData 1.3.6.1.4.1.429.1.10.3.1.27
Defines the action to take when a data packet is received with the D-bit set and the local user did not request use of the D-bit. Default=clearCall(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER leaveDbit(1), zeroDbit(2), clearCall(3)  

ux25AdmnDbitOutData 1.3.6.1.4.1.429.1.10.3.1.28
Defines the action when the local user send a data packet with the D-bit set, but the remote party has not indicated D-bit support. Default=clearCall(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER leaveDbit(1), zeroDbit(2), clearCall(3)  

ux25AdmnSubscriberTable 1.3.6.1.4.1.429.1.10.4
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25AdmnSubscriberEntry

ux25AdmnSubscriberEntry 1.3.6.1.4.1.429.1.10.4.1
Entries of ux25AdmnSubscriberTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25AdmnSubscriberEntry  

ux25AdmnSubscriberIndex 1.3.6.1.4.1.429.1.10.4.1.1
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25AdmnSubCugIaoa 1.3.6.1.4.1.429.1.10.4.1.2
Specifies if this DTE subscribes to Closed User Groups with Incoming or Outgoing access. Default=enable(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnSubCugPref 1.3.6.1.4.1.429.1.10.4.1.3
Specifies if this DTE subscribes to a Preferential Closed User Groups. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnSubCugoa 1.3.6.1.4.1.429.1.10.4.1.4
Specifies if this DTE subscribes to Closed User Groups with Outgoing access. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnSubCugia 1.3.6.1.4.1.429.1.10.4.1.5
Specifies whether or not this DTE subscribes to Closed User Groups with Incoming Access. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnCugFormat 1.3.6.1.4.1.429.1.10.4.1.6
The maximum number of Closed User Groups that this DTE subscribes to. This will be one of two ranges: Basic (100 or fewer) or Extended (between 101 and 10000). Default=basic(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER basic(1), extended(2)  

ux25AdmnBarInCug 1.3.6.1.4.1.429.1.10.4.1.7
Provides the means to force rejection of any incoming calls carrying the Closed User Group optional facility (which is necessary in some networks, such as DDN. When enabled, such calls will be rejected, otherwise incoming Closed User Group facilities are ignored. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnSubExtended 1.3.6.1.4.1.429.1.10.4.1.8
Subscribe to extended call packets (Window and Packet size negotiation is permitted). Default=enable(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnBarExtended 1.3.6.1.4.1.429.1.10.4.1.9
Treat window and packet size negotiation in incoming packets as a procedure error. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnSubFstSelNoRstrct 1.3.6.1.4.1.429.1.10.4.1.10
Subscribe to fast select with no restriction on response. Default=enable(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnSubFstSelWthRstrct 1.3.6.1.4.1.429.1.10.4.1.11
Subscribe to fast select with restriction on response. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnAccptRvsChrgng 1.3.6.1.4.1.429.1.10.4.1.12
Allow incoming calls to specify the reverse charging facility. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnSubLocChargePrevent 1.3.6.1.4.1.429.1.10.4.1.13
Subscribe to local charging prevention. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnSubToaNpiFormat 1.3.6.1.4.1.429.1.10.4.1.14
Subscribe to TOA/NPI Address Format. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnBarToaNpiFormat 1.3.6.1.4.1.429.1.10.4.1.15
Bar incoming call set-up and clearing packets which use the TOA/NPI Address Format. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnSubNuiOverride 1.3.6.1.4.1.429.1.10.4.1.16
Subscribe to NUI override. Deafult=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnBarInCall 1.3.6.1.4.1.429.1.10.4.1.17
Bar incoming calls. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnBarOutCall 1.3.6.1.4.1.429.1.10.4.1.18
Bar outgoing calls. Default=disable(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25AdmnTimerTable 1.3.6.1.4.1.429.1.10.5
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25AdmnTimerEntry

ux25AdmnTimerEntry 1.3.6.1.4.1.429.1.10.5.1
Entries of ux25AdmnTimerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25AdmnTimerEntry  

ux25AdmnTimerIndex 1.3.6.1.4.1.429.1.10.5.1.1
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25AdmnAckDelay 1.3.6.1.4.1.429.1.10.5.1.2
The maximum number of ticks (0.1 second units) over which a pending acknowledgement is withheld. Default=5.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnRstrtTime 1.3.6.1.4.1.429.1.10.5.1.3
The number of ticks (0.1 second units) for the DTE timer parameter T20, the Restart Request Response Timer. Default=1800.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnCallTime 1.3.6.1.4.1.429.1.10.5.1.4
The number of ticks (0.1 second units) for the DTE timer parameter T21, the Call Request Response Timer. Default=2000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnRstTime 1.3.6.1.4.1.429.1.10.5.1.5
The number of ticks (0.1 second units) for the DTE timer parameter T22, the Reset Request Response Timer. Default=1800.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnClrTime 1.3.6.1.4.1.429.1.10.5.1.6
The number of ticks (0.1 second units) for the DTE timer parameter T23, the Clear Request Response Timer. Default=1800.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnWinStatTime 1.3.6.1.4.1.429.1.10.5.1.7
Related, but does not correspond exactly to the DTE Window Status Transmission Timer, T24. Specifies the number of ticks (0.1 second units) for the maximum time that acknowledgments of data received from the remote transmitter will be witheld. At timer expiration, any witheld acknowledgments will be carried by a X.25 level 3 RNR packet. Default=750.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnWinRotTime 1.3.6.1.4.1.429.1.10.5.1.8
The number of ticks (0.1 second units) for the DTE timer parameter T25, the Window Rotation Timer. Default=1500.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnIntrptTime 1.3.6.1.4.1.429.1.10.5.1.9
The number of ticks (0.1 second units) for the DTE timer parameter T26, the Interrupt Response Timer. Default=1800.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnIdleValue 1.3.6.1.4.1.429.1.10.5.1.10
The number of ticks (0.1 second units) during which a link level connection associated with no connections will be maintained. If the link is to a WAN then this value should be zero (infinity). This timer is only used with X.25 on a LAN. Default=0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnConnectValue 1.3.6.1.4.1.429.1.10.5.1.11
Specifies the number of ticks (0.1 second units), over which the DTE/DCE resolution phase be completely implemented in order to prevent the unlikely event that two packet level entities cannot resolve their DTE/DCE nature. When this expires, the link connection will be disconnected and all pending connections aborted. Default=2000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnRstrtCnt 1.3.6.1.4.1.429.1.10.5.1.12
The number of ticks (0.1 second units) for the DTE Restart Request Retransmission Count. Default=1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

ux25AdmnRstCnt 1.3.6.1.4.1.429.1.10.5.1.13
The number of ticks (0.1 second units) for the DTE Reset Request Retransmission Count. Default=1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

ux25AdmnClrCnt 1.3.6.1.4.1.429.1.10.5.1.14
The number of ticks (0.1 second units) for the DTE Clear Request Retransmission Count. Default=1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

ux25AdmnLocalDelay 1.3.6.1.4.1.429.1.10.5.1.15
The transit delay (in 0.1 second units) attributed to internal processing. Default=5.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25AdmnAccessDelay 1.3.6.1.4.1.429.1.10.5.1.16
The transit delay (in 0.1 second units) attributed to the effect of the line transmission rate. Default=5.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperChannelTable 1.3.6.1.4.1.429.1.10.6
Defines objects that report the current parameters used by a running interface. These objects are read only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25OperChannelEntry

ux25OperChannelEntry 1.3.6.1.4.1.429.1.10.6.1
Entries of ux25OperChannelTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25OperChannelEntry  

ux25OperChannelIndex 1.3.6.1.4.1.429.1.10.6.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25OperNetMode 1.3.6.1.4.1.429.1.10.6.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x25Llc(1), x2588(2), x2584(3), x2580(4), pss(5), austpac(6), datapac(7), ddn(8), telenet(9), transpac(10), tymnet(11), datexP(12), ddxP(13), venusP(14), accunet(15), itapac(16), datapak(17), datanet(18), dcs(19), telepac(20), fDatapac(21), finpac(22), pacnet(23), luxpac(24)  

ux25OperProtocolVersion 1.3.6.1.4.1.429.1.10.6.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x25ver80(1), x25ver84(2), x25ver88(3)  

ux25OperInterfaceMode 1.3.6.1.4.1.429.1.10.6.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dceMode(1), dteMode(2), dxeMode(3)  

ux25OperLowestPVCVal 1.3.6.1.4.1.429.1.10.6.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

ux25OperHighestPVCVal 1.3.6.1.4.1.429.1.10.6.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

ux25OperChannelLIC 1.3.6.1.4.1.429.1.10.6.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

ux25OperChannelHIC 1.3.6.1.4.1.429.1.10.6.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

ux25OperChannelLTC 1.3.6.1.4.1.429.1.10.6.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

ux25OperChannelHTC 1.3.6.1.4.1.429.1.10.6.1.10
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

ux25OperChannelLOC 1.3.6.1.4.1.429.1.10.6.1.11
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

ux25OperChannelHOC 1.3.6.1.4.1.429.1.10.6.1.12
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

ux25OperClassTable 1.3.6.1.4.1.429.1.10.7
Defines objects that report the current parameters used by a running interface. These objects are read only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25OperClassEntry

ux25OperClassEntry 1.3.6.1.4.1.429.1.10.7.1
Entries of ux25OperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25OperClassEntry  

ux25OperClassIndex 1.3.6.1.4.1.429.1.10.7.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25OperLocMaxThruPutClass 1.3.6.1.4.1.429.1.10.7.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25OperRemMaxThruPutClass 1.3.6.1.4.1.429.1.10.7.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25OperLocDefThruPutClass 1.3.6.1.4.1.429.1.10.7.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25OperRemDefThruPutClass 1.3.6.1.4.1.429.1.10.7.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25OperLocMinThruPutClass 1.3.6.1.4.1.429.1.10.7.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25OperRemMinThruPutClass 1.3.6.1.4.1.429.1.10.7.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tcReserved0(1), tcReserved1(2), tcReserved2(3), tc75(4), tc150(5), tc300(6), tc600(7), tc1200(8), tc2400(9), tc4800(10), tc9600(11), tc19200(12), tc48000(13), tcReserved13(14), tcReserved14(15), tcReserved15(16)  

ux25OperThclassNegToDef 1.3.6.1.4.1.429.1.10.7.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperThclassType 1.3.6.1.4.1.429.1.10.7.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noTcType(1), loNibble(2), highNibble(3), bothNibbles(4)  

ux25OperThclassWinMap 1.3.6.1.4.1.429.1.10.7.1.10
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(31..63)  

ux25OperThclassPackMap 1.3.6.1.4.1.429.1.10.7.1.11
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(31..47)  

ux25OperPacketTable 1.3.6.1.4.1.429.1.10.8
Defines objects that report the current parameters used by a running interface. These objects are read only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25OperPacketEntry

ux25OperPacketEntry 1.3.6.1.4.1.429.1.10.8.1
Entries of ux25OperPacketTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25OperPacketEntry  

ux25OperPacketIndex 1.3.6.1.4.1.429.1.10.8.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25OperPktSequencing 1.3.6.1.4.1.429.1.10.8.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pktSeq8(16), pktSeq128(32)  

ux25OperLocMaxPktSize 1.3.6.1.4.1.429.1.10.8.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER maxPktSz128(7), maxPktSz256(8), maxPktSz512(9)  

ux25OperRemMaxPktSize 1.3.6.1.4.1.429.1.10.8.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER maxPktSz128(7), maxPktSz256(8), maxPktSz512(9)  

ux25OperLocDefPktSize 1.3.6.1.4.1.429.1.10.8.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER defPktSz16(4), defPktSz32(5), defPktSz64(6), defPktSz128(7), defPktSz256(8), defPktSz512(9)  

ux25OperRemDefPktSize 1.3.6.1.4.1.429.1.10.8.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER defPktSz16(4), defPktSz32(5), defPktSz64(6), defPktSz128(7), defPktSz256(8), defPktSz512(9)  

ux25OperLocMaxWinSize 1.3.6.1.4.1.429.1.10.8.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..127  

ux25OperRemMaxWinSize 1.3.6.1.4.1.429.1.10.8.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..127  

ux25OperLocDefWinSize 1.3.6.1.4.1.429.1.10.8.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

ux25OperRemDefWinSize 1.3.6.1.4.1.429.1.10.8.1.10
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

ux25OperMaxNSDULimit 1.3.6.1.4.1.429.1.10.8.1.11
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperAccNoDiagnostic 1.3.6.1.4.1.429.1.10.8.1.12
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperUseDiagnosticPacket 1.3.6.1.4.1.429.1.10.8.1.13
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperItutClearLen 1.3.6.1.4.1.429.1.10.8.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperBarDiagnosticPacket 1.3.6.1.4.1.429.1.10.8.1.15
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperDiscNzDiagnostic 1.3.6.1.4.1.429.1.10.8.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperAcceptHexAdd 1.3.6.1.4.1.429.1.10.8.1.17
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperBarNonPrivilegeListen 1.3.6.1.4.1.429.1.10.8.1.18
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperIntlAddrRecognition 1.3.6.1.4.1.429.1.10.8.1.19
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notDistinguished(1), examineDnic(2), prefix1(3), prefix0(4)  

ux25OperDnic 1.3.6.1.4.1.429.1.10.8.1.20
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(4..4)  

ux25OperIntlPrioritized 1.3.6.1.4.1.429.1.10.8.1.21
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperPrtyEncodeCtrl 1.3.6.1.4.1.429.1.10.8.1.22
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x2588(1), datapacPriority76(2), datapacTraffic80(3)  

ux25OperPrtyPktForcedVal 1.3.6.1.4.1.429.1.10.8.1.23
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER prioPktSz0(1), prioPktSz4(5), prioPktSz5(6), prioPktSz6(7), prioPktSz7(8), prioPktSz8(9), prioPktSz9(10), prioPktSz10(11), prioPktSz11(12), prioPktSz12(13)  

ux25OperSrcAddrCtrl 1.3.6.1.4.1.429.1.10.8.1.24
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noSaCntrl(1), omitDte(2), useLocal(3), forceLocal(4)  

ux25OperDbitInAccept 1.3.6.1.4.1.429.1.10.8.1.25
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER leaveDbit(1), zeroDbit(2), clearCall(3)  

ux25OperDbitOutAccept 1.3.6.1.4.1.429.1.10.8.1.26
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER leaveDbit(1), zeroDbit(2), clearCall(3)  

ux25OperDbitInData 1.3.6.1.4.1.429.1.10.8.1.27
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER leaveDbit(1), zeroDbit(2), clearCall(3)  

ux25OperDbitOutData 1.3.6.1.4.1.429.1.10.8.1.28
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER leaveDbit(1), zeroDbit(2), clearCall(3)  

ux25OperSubscriberTable 1.3.6.1.4.1.429.1.10.9
Defines objects that report the current parameters used by a running interface. These objects are read only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25OperSubscriberEntry

ux25OperSubscriberEntry 1.3.6.1.4.1.429.1.10.9.1
Entries of ux25OperSubscriberTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25OperSubscriberEntry  

ux25OperSubscriberIndex 1.3.6.1.4.1.429.1.10.9.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25OperSubCugIaoa 1.3.6.1.4.1.429.1.10.9.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperSubCugPref 1.3.6.1.4.1.429.1.10.9.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperSubCugoa 1.3.6.1.4.1.429.1.10.9.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperSubCugia 1.3.6.1.4.1.429.1.10.9.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperCugFormat 1.3.6.1.4.1.429.1.10.9.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER basic(1), extended(2)  

ux25OperBarInCug 1.3.6.1.4.1.429.1.10.9.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperSubExtended 1.3.6.1.4.1.429.1.10.9.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperBarExtended 1.3.6.1.4.1.429.1.10.9.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperSubFstSelNoRstrct 1.3.6.1.4.1.429.1.10.9.1.10
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperSubFstSelWthRstrct 1.3.6.1.4.1.429.1.10.9.1.11
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperAccptRvsChrgng 1.3.6.1.4.1.429.1.10.9.1.12
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperSubLocChargePrevent 1.3.6.1.4.1.429.1.10.9.1.13
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperSubToaNpiFormat 1.3.6.1.4.1.429.1.10.9.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperBarToaNpiFormat 1.3.6.1.4.1.429.1.10.9.1.15
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperSubNuiOverride 1.3.6.1.4.1.429.1.10.9.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperBarInCall 1.3.6.1.4.1.429.1.10.9.1.17
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperBarOutCall 1.3.6.1.4.1.429.1.10.9.1.18
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ux25OperTimerTable 1.3.6.1.4.1.429.1.10.10
Defines objects that report the current parameters used by a running interface. These objects are read only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25OperTimerEntry

ux25OperTimerEntry 1.3.6.1.4.1.429.1.10.10.1
Entries of ux25OperTimerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25OperTimerEntry  

ux25OperTimerIndex 1.3.6.1.4.1.429.1.10.10.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25OperAckDelay 1.3.6.1.4.1.429.1.10.10.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperRstrtTime 1.3.6.1.4.1.429.1.10.10.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperCallTime 1.3.6.1.4.1.429.1.10.10.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperRstTime 1.3.6.1.4.1.429.1.10.10.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperClrTime 1.3.6.1.4.1.429.1.10.10.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperWinStatTime 1.3.6.1.4.1.429.1.10.10.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperWinRotTime 1.3.6.1.4.1.429.1.10.10.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperIntrptTime 1.3.6.1.4.1.429.1.10.10.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperIdleValue 1.3.6.1.4.1.429.1.10.10.1.10
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperConnectValue 1.3.6.1.4.1.429.1.10.10.1.11
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperRstrtCnt 1.3.6.1.4.1.429.1.10.10.1.12
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

ux25OperRstCnt 1.3.6.1.4.1.429.1.10.10.1.13
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

ux25OperClrCnt 1.3.6.1.4.1.429.1.10.10.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

ux25OperLocalDelay 1.3.6.1.4.1.429.1.10.10.1.15
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25OperAccessDelay 1.3.6.1.4.1.429.1.10.10.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

ux25StatTable 1.3.6.1.4.1.429.1.10.11
Defines objects that report operational statistics for an X.25 interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ux25StatEntry

ux25StatEntry 1.3.6.1.4.1.429.1.10.11.1
Entries of ux25StatTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ux25StatEntry  

ux25StatIndex 1.3.6.1.4.1.429.1.10.11.1.1
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatCallsRcvd 1.3.6.1.4.1.429.1.10.11.1.2
Number of incoming calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatCallsSent 1.3.6.1.4.1.429.1.10.11.1.3
Number of outgoing calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatCallsRcvdEstab 1.3.6.1.4.1.429.1.10.11.1.4
Number of incoming calls established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatCallsSentEstab 1.3.6.1.4.1.429.1.10.11.1.5
Number of outgoing calls established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatDataPktsRcvd 1.3.6.1.4.1.429.1.10.11.1.6
Number of data packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatDataPktsSent 1.3.6.1.4.1.429.1.10.11.1.7
Number of data packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatRestartsRcvd 1.3.6.1.4.1.429.1.10.11.1.8
Number of restarts received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatRestartsSent 1.3.6.1.4.1.429.1.10.11.1.9
Number of restarts sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatRcvrNotRdyRcvd 1.3.6.1.4.1.429.1.10.11.1.10
Number of receiver not ready received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatRcvrNotRdySent 1.3.6.1.4.1.429.1.10.11.1.11
Number of receiver not ready sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatRcvrRdyRcvd 1.3.6.1.4.1.429.1.10.11.1.12
Number of receiver ready received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatRcvrRdySent 1.3.6.1.4.1.429.1.10.11.1.13
Number of receiver ready sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatResetsRcvd 1.3.6.1.4.1.429.1.10.11.1.14
Number of resets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatResetsSent 1.3.6.1.4.1.429.1.10.11.1.15
Number of resets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatDiagPktsRcvd 1.3.6.1.4.1.429.1.10.11.1.16
Number of diagnostic packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatDiagPktsSent 1.3.6.1.4.1.429.1.10.11.1.17
Number of diagnostic packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatIntrptPktsRcvd 1.3.6.1.4.1.429.1.10.11.1.18
Number of interrupt packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatIntrptPktsSent 1.3.6.1.4.1.429.1.10.11.1.19
Number of interrupt packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatPVCsInDatTrnsfrState 1.3.6.1.4.1.429.1.10.11.1.20
Number of PVCs in Data Transfer State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ux25StatSVCsInDatTrnsfrState 1.3.6.1.4.1.429.1.10.11.1.21
Number of SVCs in Data Transfer State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER