VERILINK-ENTERPRISE-NCMDS3-MIB
File:
VERILINK-ENTERPRISE-NCMDS3-MIB.mib (92972 bytes)
Imported modules
Imported symbols
Defined Types
NcmhdmDs3PortEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmDs3PortNIDIndex |
INTEGER |
|
|
ncmhdmDs3PortIndex |
INTEGER |
|
|
ncmhdmDs3PerfControl |
INTEGER |
|
|
ncmhdmDs3LBOSelection |
INTEGER |
|
|
ncmhdmDs3DataRateMode |
INTEGER |
|
|
ncmhdmDs3Rate |
INTEGER |
|
|
ncmhdmDs3LineType |
INTEGER |
|
|
ncmhdmDs3LineCode |
INTEGER |
|
|
ncmhdmDs3AISCBit |
INTEGER |
|
|
ncmhdmDs3EquipCode |
DisplayString |
|
|
ncmhdmDs3LocationIDCode |
DisplayString |
|
|
ncmhdmDs3FrameIDCode |
DisplayString |
|
|
ncmhdmDs3UnitCode |
DisplayString |
|
|
ncmhdmDs3FacilityIDCode |
DisplayString |
|
|
ncmhdmDs3PortIdCode |
DisplayString |
|
|
ncmhdmDs3CircuitID |
DisplayString |
|
|
ncmhdmDs3GenIDCode |
DisplayString |
|
|
ncmhdmDs3Inband |
INTEGER |
|
NcmhdmHssi1PortEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmDs3Hssi1NIDIndex |
INTEGER |
|
|
ncmhdmHssi1PortIndex |
INTEGER |
|
|
ncmhdmHssi1ConfigMode |
INTEGER |
|
|
ncmhdmHssi1PortConfig |
INTEGER |
|
|
ncmhdmHssi1TestMode |
INTEGER |
|
|
ncmhdmHssi1DataRateMode |
INTEGER |
|
|
ncmhdmHssi1HssiRate |
INTEGER |
|
|
ncmhdmHssi1CircuitID |
DisplayString |
|
NcmhdmHssiStatEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmHssiStatNIDIndex |
INTEGER |
|
|
ncmhdmHssiStatIndex |
INTEGER |
|
|
ncmhdmStatDCEReady |
INTEGER |
|
|
ncmhdmStatDTEReady |
INTEGER |
|
|
ncmhdmStatLpbkA |
INTEGER |
|
|
ncmhdmStatLpbkB |
INTEGER |
|
|
ncmhdmStatTestMode |
INTEGER |
|
|
ncmhdmStatPortState |
INTEGER |
|
|
ncmhdmStatCIMType |
INTEGER |
|
|
ncmhdmStatDiagStatus |
INTEGER |
|
NcmhdmCurrentEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmCurrentNIDIndex |
INTEGER |
|
|
ncmhdmCurrentIndex |
INTEGER |
|
|
ncmhdmCurrentCRC4Status |
INTEGER |
|
|
ncmhdmCurrentTimeStampSecs |
INTEGER |
|
|
ncmhdmCurrentTimeStampMSecs |
INTEGER |
|
|
ncmhdmCurrentSecsElaps |
INTEGER |
|
|
ncmhdmCurrentFarEndCCV |
Gauge |
|
|
ncmhdmCurrentFarEndCES |
Gauge |
|
|
ncmhdmCurrentFarEndCSES |
Gauge |
|
|
ncmhdmCurrentFarEndLUAS |
Gauge |
|
|
ncmhdmCurrentLCV |
Gauge |
|
|
ncmhdmCurrentLES |
Gauge |
|
|
ncmhdmCurrentLSESs |
Gauge |
|
|
ncmhdmCurrentPCV |
Gauge |
|
|
ncmhdmCurrentPES |
Gauge |
|
|
ncmhdmCurrentPSES |
Gauge |
|
|
ncmhdmCurrentCCV |
Gauge |
|
|
ncmhdmCurrentCES |
Gauge |
|
|
ncmhdmCurrentCSES |
Gauge |
|
|
ncmhdmCurrentSEFS |
Gauge |
|
|
ncmhdmCurrentAISS |
Gauge |
|
|
ncmhdmCurrentOOSSs |
Gauge |
|
|
ncmhdmCurrentLOSSs |
Gauge |
|
|
ncmhdmCurrentLOFSs |
Gauge |
|
NcmhdmIntervalEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmIntervalNIDIndex |
INTEGER |
|
|
ncmhdmIntervalIndex |
INTEGER |
|
|
ncmhdmIntervalNumber |
INTEGER |
|
|
ncmhdmIntervalFarEndCCV |
Gauge |
|
|
ncmhdmIntervalFarEndCES |
Gauge |
|
|
ncmhdmIntervalFarEndCSES |
Gauge |
|
|
ncmhdmIntervalFarEndLUAS |
Gauge |
|
|
ncmhdmIntervalLCV |
Gauge |
|
|
ncmhdmIntervalLES |
Gauge |
|
|
ncmhdmIntervalLSESs |
Gauge |
|
|
ncmhdmIntervalPCV |
Gauge |
|
|
ncmhdmIntervalPES |
Gauge |
|
|
ncmhdmIntervalPSES |
Gauge |
|
|
ncmhdmIntervalCCV |
Gauge |
|
|
ncmhdmIntervalCES |
Gauge |
|
|
ncmhdmIntervalCSES |
Gauge |
|
|
ncmhdmIntervalSEFS |
Gauge |
|
|
ncmhdmIntervalAISS |
Gauge |
|
|
ncmhdmIntervalOOSSs |
Gauge |
|
|
ncmhdmIntervalLOSSs |
Gauge |
|
|
ncmhdmIntervalLOFSs |
Gauge |
|
NcmhdmTotalEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmTotalNIDIndex |
INTEGER |
|
|
ncmhdmTotalIndex |
INTEGER |
|
|
ncmhdmTotalCRC4Status |
INTEGER |
|
|
ncmhdmTotalValidInterv |
INTEGER |
|
|
ncmhdmTotalFarEndCCV |
Gauge |
|
|
ncmhdmTotalFarEndCES |
Gauge |
|
|
ncmhdmTotalFarEndCSES |
Gauge |
|
|
ncmhdmTotalFarEndLUAS |
Gauge |
|
|
ncmhdmTotalLCV |
Gauge |
|
|
ncmhdmTotalLES |
Gauge |
|
|
ncmhdmTotalLSESs |
Gauge |
|
|
ncmhdmTotalPCV |
Gauge |
|
|
ncmhdmTotalPES |
Gauge |
|
|
ncmhdmTotalPSES |
Gauge |
|
|
ncmhdmTotalCCV |
Gauge |
|
|
ncmhdmTotalCES |
Gauge |
|
|
ncmhdmTotalCSES |
Gauge |
|
|
ncmhdmTotalSEFS |
Gauge |
|
|
ncmhdmTotalAISS |
Gauge |
|
|
ncmhdmTotalOOSSs |
Gauge |
|
|
ncmhdmTotalLOSSs |
Gauge |
|
|
ncmhdmTotalLOFSs |
Gauge |
|
NcmDs3PerformanceSnapShotEntry |
|
SEQUENCE |
|
|
|
|
ncmDs3SnapShotNIDIndex |
INTEGER |
|
|
ncmDs3SnapShotIndex |
INTEGER |
|
|
ncmDs3SnapShotCRC4Status |
INTEGER |
|
|
ncmDs3SnapShot |
INTEGER |
|
|
ncmDs3TimeStampSec |
INTEGER |
|
|
ncmDs3TimeStampMilliSec |
INTEGER |
|
|
ncmDs3SnapShotSecs |
INTEGER |
|
|
ncmDs3ResetPerfReg |
INTEGER |
|
NcmhdmTCAQtrEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmTCAQtrNIDIndex |
INTEGER |
|
|
ncmhdmTCAQtrIndex |
INTEGER |
|
|
ncmhdmTCAQtrDs3FarEndCCV |
INTEGER |
|
|
ncmhdmTCAQtrDs3FarEndCES |
INTEGER |
|
|
ncmhdmTCAQtrDs3FarEndCSES |
INTEGER |
|
|
ncmhdmTCAQtrDs3FarEndLUAS |
INTEGER |
|
|
ncmhdmTCAQtrDs3LCV |
INTEGER |
|
|
ncmhdmTCAQtrDs3LES |
INTEGER |
|
|
ncmhdmTCAQtrDs3LSESs |
INTEGER |
|
|
ncmhdmTCAQtrDs3PCV |
INTEGER |
|
|
ncmhdmTCAQtrDs3PES |
INTEGER |
|
|
ncmhdmTCAQtrDs3PSES |
INTEGER |
|
|
ncmhdmTCAQtrDs3CCV |
INTEGER |
|
|
ncmhdmTCAQtrDs3CES |
INTEGER |
|
|
ncmhdmTCAQtrDs3CSES |
INTEGER |
|
|
ncmhdmTCAQtrDs3SEFS |
INTEGER |
|
|
ncmhdmTCAQtrDs3AISS |
INTEGER |
|
|
ncmhdmTCAQtrDs3LUASs |
INTEGER |
|
|
ncmhdmTCAQtrDs3LOSSs |
INTEGER |
|
|
ncmhdmTCAQtrDs3LOFSs |
INTEGER |
|
NcmhdmTCADayEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmTCADayNIDIndex |
INTEGER |
|
|
ncmhdmTCADayIndex |
INTEGER |
|
|
ncmhdmTCADayDs3FarEndCCV |
INTEGER |
|
|
ncmhdmTCADayDs3FarEndCES |
INTEGER |
|
|
ncmhdmTCADayDs3FarEndCSES |
INTEGER |
|
|
ncmhdmTCADayDs3FarEndLUAS |
INTEGER |
|
|
ncmhdmTCADayDs3LCV |
INTEGER |
|
|
ncmhdmTCADayDs3LES |
INTEGER |
|
|
ncmhdmTCADayDs3LSESs |
INTEGER |
|
|
ncmhdmTCADayDs3PCV |
INTEGER |
|
|
ncmhdmTCADayDs3PES |
INTEGER |
|
|
ncmhdmTCADayDs3PSES |
INTEGER |
|
|
ncmhdmTCADayDs3CCV |
INTEGER |
|
|
ncmhdmTCADayDs3CES |
INTEGER |
|
|
ncmhdmTCADayDs3CSES |
INTEGER |
|
|
ncmhdmTCADayDs3SEFS |
INTEGER |
|
|
ncmhdmTCADayDs3AISS |
INTEGER |
|
|
ncmhdmTCADayDs3LUASs |
INTEGER |
|
|
ncmhdmTCADayDs3LOSSs |
INTEGER |
|
|
ncmhdmTCADayDs3LOFSs |
INTEGER |
|
NcmhdmTxAlarmEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmTxAlarmNIDIndex |
INTEGER |
|
|
ncmhdmTxAlarmIndex |
INTEGER |
|
|
ncmhdmTxYellowAlarm |
INTEGER |
|
|
ncmhdmTxAIS |
INTEGER |
|
|
ncmhdmTxIdleSignal |
INTEGER |
|
|
ncmhdmTxFEBE |
INTEGER |
|
|
ncmhdmTxFEACAlarm |
INTEGER |
|
NcmhdmDs3StatEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmDs3StatNIDIndex |
INTEGER |
|
|
ncmhdmDs3StatIndex |
INTEGER |
|
|
ncmhdmDs3StatAIS |
INTEGER |
|
|
ncmhdmDs3StatIdle |
INTEGER |
|
|
ncmhdmDs3StatYellowAlm |
INTEGER |
|
|
ncmhdmDs3StatFrameLoss |
INTEGER |
|
|
ncmhdmDs3StatSigLoss |
INTEGER |
|
|
ncmhdmDs3StatPLCPYellow |
INTEGER |
|
|
ncmhdmDs3StatPLCPFrmLoss |
INTEGER |
|
|
ncmhdmDs3StatPLCPOOF |
INTEGER |
|
|
ncmhdmDs3LpbkLocal |
INTEGER |
|
|
ncmhdmDs3LpbkPayload |
INTEGER |
|
|
ncmhdmDs3LpbkFEAC |
INTEGER |
|
|
ncmhdmDs3LpbkFarEnd |
INTEGER |
|
Ncmhdmds3LPBKEntry |
|
SEQUENCE |
|
|
|
|
ncmhdmLPBKNIDIndex |
INTEGER |
|
|
ncmhdmds3LPBKIndex |
INTEGER |
|
|
ncmhdmDs3LPBKActivation |
INTEGER |
|
Defined Values
ncmhdmDs3PortEntry |
1.3.6.1.4.1.321.1.3036.9000.1 |
An entry in the dsu information table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmDs3PortEntry |
|
|
ncmhdmDs3PortNIDIndex |
1.3.6.1.4.1.321.1.3036.9000.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmDs3PortIndex |
1.3.6.1.4.1.321.1.3036.9000.1.2 |
The index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmDs3PerfControl |
1.3.6.1.4.1.321.1.3036.9000.1.3 |
Performance Control Enabled/Disabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
ncmhdmDs3LBOSelection |
1.3.6.1.4.1.321.1.3036.9000.1.4 |
Select the length of DS3 cable to be Normal
(0-255 feet) or Long cable (225-450 feet). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
nORMAL-CABLE(1), lONG-CABLE(2) |
|
ncmhdmDs3DataRateMode |
1.3.6.1.4.1.321.1.3036.9000.1.5 |
Data Rate Mode. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
only-NearEnd(1), both-NearEndORFarEnd(2), not-applicable(3) |
|
ncmhdmDs3Rate |
1.3.6.1.4.1.321.1.3036.9000.1.6 |
the date rate fro ds3 . |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ncmhdmDs3LineType |
1.3.6.1.4.1.321.1.3036.9000.1.7 |
Line Type. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dsx3M13(2), dSX3CBitParity(4) |
|
ncmhdmDs3LineCode |
1.3.6.1.4.1.321.1.3036.9000.1.8 |
Line Code. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dSX3CB3ZS(2) |
|
ncmhdmDs3AISCBit |
1.3.6.1.4.1.321.1.3036.9000.1.9 |
AISCBit. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
aISCBit(1) |
|
ncmhdmDs3EquipCode |
1.3.6.1.4.1.321.1.3036.9000.1.10 |
This is the Far End Equipment Identification code
that describes the specific piece of equipment.
It is sent within the Path
Identification Message. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..10) |
|
ncmhdmDs3LocationIDCode |
1.3.6.1.4.1.321.1.3036.9000.1.11 |
This is the Far End Location Identification code
that describes the specific location of the
equipment. It is sent within the Path
Identification Message. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..11) |
|
ncmhdmDs3FrameIDCode |
1.3.6.1.4.1.321.1.3036.9000.1.12 |
This is the Far End Frame Identification code
that identifies where the equipment is located
within a building at a given location.
It is sent within the Path Identification Message. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..10) |
|
ncmhdmDs3UnitCode |
1.3.6.1.4.1.321.1.3036.9000.1.13 |
This is the Far End code
that identifies the equipment location within a bay.
It is sent within the Path
Identification Message. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..6) |
|
ncmhdmDs3FacilityIDCode |
1.3.6.1.4.1.321.1.3036.9000.1.14 |
This code identifies a specific Far End DS3 path.
It is sent within the Path Identification Message. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..38) |
|
ncmhdmDs3Inband |
1.3.6.1.4.1.321.1.3036.9000.1.18 |
Inband signalling control. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
ncmhdmHssi1PortEntry |
1.3.6.1.4.1.321.1.3036.9001.1 |
An entry in the dsu information table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmHssi1PortEntry |
|
|
ncmhdmDs3Hssi1NIDIndex |
1.3.6.1.4.1.321.1.3036.9001.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmHssi1PortIndex |
1.3.6.1.4.1.321.1.3036.9001.1.2 |
The index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmHssi1ConfigMode |
1.3.6.1.4.1.321.1.3036.9001.1.3 |
Set the Hssi Port to be automatic configuration
or manual configuration. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
aUTOMATIC(1), mANUAL(2) |
|
ncmhdmHssi1PortConfig |
1.3.6.1.4.1.321.1.3036.9001.1.4 |
Configure System - In-Service or Out of Service. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oUT-OF-SERVICE(1), iN-SERVICE(2) |
|
ncmhdmHssi1TestMode |
1.3.6.1.4.1.321.1.3036.9001.1.5 |
Report status of the test mode of HSSI port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ncmhdmHssi1DataRateMode |
1.3.6.1.4.1.321.1.3036.9001.1.6 |
Data Rate Mode for the Hssi Ports . |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
only-NearEnd(1), both-NearEndORFarEnd(2), not-applicable(3) |
|
ncmhdmHssi1HssiRate |
1.3.6.1.4.1.321.1.3036.9001.1.7 |
Data Rate in # of T1. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..28 |
|
ncmhdmHssi1CircuitID |
1.3.6.1.4.1.321.1.3036.9001.1.8 |
This is the Circuit ID for the Hssi port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..20) |
|
ncmhdmHssiStatEntry |
1.3.6.1.4.1.321.1.3036.9002.1 |
An entry in the Hssi ds3 stats table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmHssiStatEntry |
|
|
ncmhdmHssiStatNIDIndex |
1.3.6.1.4.1.321.1.3036.9002.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmHssiStatIndex |
1.3.6.1.4.1.321.1.3036.9002.1.2 |
The index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmStatDCEReady |
1.3.6.1.4.1.321.1.3036.9002.1.3 |
Hssi Port DCE Ready OFF/ON. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmStatDTEReady |
1.3.6.1.4.1.321.1.3036.9002.1.4 |
Hssi Port DTE Ready OFF/ON. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmStatLpbkA |
1.3.6.1.4.1.321.1.3036.9002.1.5 |
Hssi Port - Loopback A OFF/ON. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmStatLpbkB |
1.3.6.1.4.1.321.1.3036.9002.1.6 |
Hssi Port - Loopback B OFF/ON. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmStatTestMode |
1.3.6.1.4.1.321.1.3036.9002.1.7 |
Hssi Port Test Mode OFF/ON. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmStatPortState |
1.3.6.1.4.1.321.1.3036.9002.1.8 |
Hssi Port - In-Service or Out of Service. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oUT-OF-SERVICE(1), iN-SERVICE(2) |
|
ncmhdmStatCIMType |
1.3.6.1.4.1.321.1.3036.9002.1.9 |
Ds3 Cim Type. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
cim-2080(44), cdm-2080(59), cdm-2182(63) |
|
ncmhdmStatDiagStatus |
1.3.6.1.4.1.321.1.3036.9002.1.10 |
Hssi User Equipment Loopback OFF/ON. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmCurrentEntry |
1.3.6.1.4.1.321.1.3036.9003.1 |
An entry in the DS3/E3 Current table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmCurrentEntry |
|
|
ncmhdmCurrentNIDIndex |
1.3.6.1.4.1.321.1.3036.9003.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmCurrentIndex |
1.3.6.1.4.1.321.1.3036.9003.1.2 |
The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmCurrentCRC4Status |
1.3.6.1.4.1.321.1.3036.9003.1.3 |
Current CRC4 Status. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1) |
|
ncmhdmCurrentTimeStampSecs |
1.3.6.1.4.1.321.1.3036.9003.1.4 |
Current Time in seconds. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmCurrentTimeStampMSecs |
1.3.6.1.4.1.321.1.3036.9003.1.5 |
Current Time in milliseconds. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmCurrentSecsElaps |
1.3.6.1.4.1.321.1.3036.9003.1.6 |
Seconds elapsed in the current interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmCurrentFarEndCCV |
1.3.6.1.4.1.321.1.3036.9003.1.7 |
The counter associated with the number of
Far End C-bit Code Violations,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentFarEndCES |
1.3.6.1.4.1.321.1.3036.9003.1.8 |
The counter associated with the number of
Far End C-bit Errored Seconds,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentFarEndCSES |
1.3.6.1.4.1.321.1.3036.9003.1.9 |
The counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentFarEndLUAS |
1.3.6.1.4.1.321.1.3036.9003.1.10 |
Far End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End DS3 interface
was Out Of Service in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentLCV |
1.3.6.1.4.1.321.1.3036.9003.1.11 |
The counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentLES |
1.3.6.1.4.1.321.1.3036.9003.1.12 |
Line Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentLSESs |
1.3.6.1.4.1.321.1.3036.9003.1.13 |
The counter associated with the number of
Line Severely Errored Seconds (LSES) in
the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentPCV |
1.3.6.1.4.1.321.1.3036.9003.1.14 |
The counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentPES |
1.3.6.1.4.1.321.1.3036.9003.1.15 |
The counter associated with the number of Seconds
having at least one Parity Code Violation,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentPSES |
1.3.6.1.4.1.321.1.3036.9003.1.16 |
The counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentCCV |
1.3.6.1.4.1.321.1.3036.9003.1.17 |
The counter associated with the number of
C-bit Code Violations,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentCES |
1.3.6.1.4.1.321.1.3036.9003.1.18 |
The counter associated with the number of
C-bit Errored Seconds,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentCSES |
1.3.6.1.4.1.321.1.3036.9003.1.19 |
The counter associated with the number of
C-bit Severely Errored Seconds,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentSEFS |
1.3.6.1.4.1.321.1.3036.9003.1.20 |
The counter associated with the number of seconds
in which one or more Out of Frame occurred
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentAISS |
1.3.6.1.4.1.321.1.3036.9003.1.21 |
The counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentOOSSs |
1.3.6.1.4.1.321.1.3036.9003.1.22 |
The counter associated with the number of Seconds
the DS3 interface was Out Of Service
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentLOSSs |
1.3.6.1.4.1.321.1.3036.9003.1.23 |
The counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the current
15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmCurrentLOFSs |
1.3.6.1.4.1.321.1.3036.9003.1.24 |
The counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the current
15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalEntry |
1.3.6.1.4.1.321.1.3036.9004.1 |
An entry in the DS3/E3 Interval table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmIntervalEntry |
|
|
ncmhdmIntervalNIDIndex |
1.3.6.1.4.1.321.1.3036.9004.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmIntervalIndex |
1.3.6.1.4.1.321.1.3036.9004.1.2 |
The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmIntervalNumber |
1.3.6.1.4.1.321.1.3036.9004.1.3 |
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..96 |
|
ncmhdmIntervalFarEndCCV |
1.3.6.1.4.1.321.1.3036.9004.1.4 |
The counter associated with the number of
Far End C-bit Code Violations,
in the previous 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalFarEndCES |
1.3.6.1.4.1.321.1.3036.9004.1.5 |
The counter associated with the number of
Far End C-bit Errored Seconds,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalFarEndCSES |
1.3.6.1.4.1.321.1.3036.9004.1.6 |
The counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalFarEndLUAS |
1.3.6.1.4.1.321.1.3036.9004.1.7 |
Far End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End DS3 interface
was Out Of Service in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalLCV |
1.3.6.1.4.1.321.1.3036.9004.1.8 |
The counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalLES |
1.3.6.1.4.1.321.1.3036.9004.1.9 |
Line Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalLSESs |
1.3.6.1.4.1.321.1.3036.9004.1.10 |
The counter associated with the number of
Line Severely Errored Seconds (LSES) in
the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalPCV |
1.3.6.1.4.1.321.1.3036.9004.1.11 |
The counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalPES |
1.3.6.1.4.1.321.1.3036.9004.1.12 |
The counter associated with the number of Seconds
having at least one Parity Code Violation,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalPSES |
1.3.6.1.4.1.321.1.3036.9004.1.13 |
The counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalCCV |
1.3.6.1.4.1.321.1.3036.9004.1.14 |
The counter associated with the number of
C-bit Code Violations,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalCES |
1.3.6.1.4.1.321.1.3036.9004.1.15 |
The counter associated with the number of
C-bit Errored Seconds,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalCSES |
1.3.6.1.4.1.321.1.3036.9004.1.16 |
The counter associated with the number of
C-bit Severely Errored Seconds,
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalSEFS |
1.3.6.1.4.1.321.1.3036.9004.1.17 |
The counter associated with the number of seconds
in which one or more Out of Frame occurred
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalAISS |
1.3.6.1.4.1.321.1.3036.9004.1.18 |
The counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalOOSSs |
1.3.6.1.4.1.321.1.3036.9004.1.19 |
The counter associated with the number of Seconds
the DS3 interface was Out Of Service
in the current 15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalLOSSs |
1.3.6.1.4.1.321.1.3036.9004.1.20 |
The counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the current
15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmIntervalLOFSs |
1.3.6.1.4.1.321.1.3036.9004.1.21 |
The counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the current
15 minute interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalEntry |
1.3.6.1.4.1.321.1.3036.9005.1 |
An entry in the DS3/E3 Total table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmTotalEntry |
|
|
ncmhdmTotalNIDIndex |
1.3.6.1.4.1.321.1.3036.9005.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmTotalIndex |
1.3.6.1.4.1.321.1.3036.9005.1.2 |
The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmTotalCRC4Status |
1.3.6.1.4.1.321.1.3036.9005.1.3 |
CRC4 Status. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1) |
|
ncmhdmTotalValidInterv |
1.3.6.1.4.1.321.1.3036.9005.1.4 |
The number of valid intervals. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmTotalFarEndCCV |
1.3.6.1.4.1.321.1.3036.9005.1.5 |
The counter associated with the number of
Far End C-bit Code Violations,
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalFarEndCES |
1.3.6.1.4.1.321.1.3036.9005.1.6 |
The counter associated with the number of
Far End C-bit Errored Seconds,
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalFarEndCSES |
1.3.6.1.4.1.321.1.3036.9005.1.7 |
The counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalFarEndLUAS |
1.3.6.1.4.1.321.1.3036.9005.1.8 |
Far End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End DS3 interface
was Out Of Service in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalLCV |
1.3.6.1.4.1.321.1.3036.9005.1.9 |
The counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalLES |
1.3.6.1.4.1.321.1.3036.9005.1.10 |
Line Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalLSESs |
1.3.6.1.4.1.321.1.3036.9005.1.11 |
The counter associated with the number of Seconds
Of Line Severely Errored Seconds (LSES) in the last
24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalPCV |
1.3.6.1.4.1.321.1.3036.9005.1.12 |
The counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalPES |
1.3.6.1.4.1.321.1.3036.9005.1.13 |
The counter associated with the number of Seconds
having at least one Parity Code Violation,
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalPSES |
1.3.6.1.4.1.321.1.3036.9005.1.14 |
The counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalCCV |
1.3.6.1.4.1.321.1.3036.9005.1.15 |
The counter associated with the number of
C-bit Code Violations,
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalCES |
1.3.6.1.4.1.321.1.3036.9005.1.16 |
The counter associated with the number of
C-bit Errored Seconds,
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalCSES |
1.3.6.1.4.1.321.1.3036.9005.1.17 |
The counter associated with the number of
C-bit Severely Errored Seconds,
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalSEFS |
1.3.6.1.4.1.321.1.3036.9005.1.18 |
The counter associated with the number of seconds
in which one or more Out of Frame occurred
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalAISS |
1.3.6.1.4.1.321.1.3036.9005.1.19 |
The counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the last 24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalOOSSs |
1.3.6.1.4.1.321.1.3036.9005.1.20 |
The counter associated with the number of Seconds
the DS3 interface was Out Of Service in the last 24
hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalLOSSs |
1.3.6.1.4.1.321.1.3036.9005.1.21 |
The counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the last
24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmhdmTotalLOFSs |
1.3.6.1.4.1.321.1.3036.9005.1.22 |
The counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the last
24 hour interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
ncmDs3SnapShotNIDIndex |
1.3.6.1.4.1.321.1.3036.9006.1.1 |
The object specifies the node id index of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmDs3SnapShotIndex |
1.3.6.1.4.1.321.1.3036.9006.1.2 |
The index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a LineIndex
object instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmDs3SnapShotCRC4Status |
1.3.6.1.4.1.321.1.3036.9006.1.3 |
CRC4 Status. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1) |
|
ncmDs3SnapShot |
1.3.6.1.4.1.321.1.3036.9006.1.4 |
The variable specifies the option to initiate snap shot
command. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(1), yes(2) |
|
ncmDs3TimeStampSec |
1.3.6.1.4.1.321.1.3036.9006.1.5 |
The variable specifies the Time Stamp in Seconds . |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmDs3TimeStampMilliSec |
1.3.6.1.4.1.321.1.3036.9006.1.6 |
The variable specifies the Time Stamp in milli Seconds . |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmDs3SnapShotSecs |
1.3.6.1.4.1.321.1.3036.9006.1.7 |
The variable specifies number of seconds in the current interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmDs3ResetPerfReg |
1.3.6.1.4.1.321.1.3036.9006.1.8 |
Reset Performance Monitoring registers. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(1), yes(2) |
|
ncmhdmTCAQtrEntry |
1.3.6.1.4.1.321.1.3036.9007.1 |
An entry in the DS3/E3 table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmTCAQtrEntry |
|
|
ncmhdmTCAQtrNIDIndex |
1.3.6.1.4.1.321.1.3036.9007.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmTCAQtrIndex |
1.3.6.1.4.1.321.1.3036.9007.1.2 |
The index value which uniquely identifies the
alert crossing threshold interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an plcpLineIndex object
instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmTCAQtrDs3FarEndCCV |
1.3.6.1.4.1.321.1.3036.9007.1.3 |
The performance alert threshold for DS3
layer Far End C-bit Code Violation in 1/4 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3FarEndCES |
1.3.6.1.4.1.321.1.3036.9007.1.4 |
The performance alert threshold for DS3
Far End C-bit Errored Seconds,
in 1/4 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3FarEndCSES |
1.3.6.1.4.1.321.1.3036.9007.1.5 |
The performance alert threshold for DS3
Far End C-bit Severely Errored Seconds,
in 1/4 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3FarEndLUAS |
1.3.6.1.4.1.321.1.3036.9007.1.6 |
The performance alert threshold for DS3 layer
Far End Line Unavailable Seconds in 1/4 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3LCV |
1.3.6.1.4.1.321.1.3036.9007.1.7 |
The performance alert threshold for DS3
layer Line code Violation in 1/4 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3LES |
1.3.6.1.4.1.321.1.3036.9007.1.8 |
The performance alert threshold for DS3
layer Line Errored Second in 1/4 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3LSESs |
1.3.6.1.4.1.321.1.3036.9007.1.9 |
The performance alert threshold for DS3
layer Line Severely Errored Second
in 1/4 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3PCV |
1.3.6.1.4.1.321.1.3036.9007.1.10 |
The performance alert threshold for DS3
layer Parity Code Violation in 1/4 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3PES |
1.3.6.1.4.1.321.1.3036.9007.1.11 |
The performance alert threshold for DS3
layer Parity Errored Second in 1/4 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3PSES |
1.3.6.1.4.1.321.1.3036.9007.1.12 |
The performance alert threshold for DS3
layer Parity Severely Errored Second in 1/4 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3CCV |
1.3.6.1.4.1.321.1.3036.9007.1.13 |
The performance alert threshold for DS3
layer C-bit Code Violation in 1/4 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3CES |
1.3.6.1.4.1.321.1.3036.9007.1.14 |
The performance alert threshold for DS3
Far End C-bit Errored Seconds,
layer Errored Second in 1/4 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3CSES |
1.3.6.1.4.1.321.1.3036.9007.1.15 |
The performance alert threshold for DS3
layer C-bit Severely Errored Second in 1/4 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3SEFS |
1.3.6.1.4.1.321.1.3036.9007.1.16 |
The performance alert threshold for DS3
layer Severely Errored Framing Seconds
in 1/4 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3AISS |
1.3.6.1.4.1.321.1.3036.9007.1.17 |
The performance alert threshold for DS3
layer Alarm Indication Signal Second
in 1/4 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3LUASs |
1.3.6.1.4.1.321.1.3036.9007.1.18 |
The performance alert threshold for DS3
layer Unavailable Second in 1/4 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3LOSSs |
1.3.6.1.4.1.321.1.3036.9007.1.19 |
The performance alert threshold for DS3
Loss of Signal (LOS) Seconds in 1/4 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCAQtrDs3LOFSs |
1.3.6.1.4.1.321.1.3036.9007.1.20 |
The performance alert threshold for DS3
Loss of Frame (LOF) Seconds in 1/4 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayEntry |
1.3.6.1.4.1.321.1.3036.9008.1 |
An entry in the 24 hour Alert Threshold Table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmTCADayEntry |
|
|
ncmhdmTCADayNIDIndex |
1.3.6.1.4.1.321.1.3036.9008.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmTCADayIndex |
1.3.6.1.4.1.321.1.3036.9008.1.2 |
The index value which uniquely identifies the
alert crossing threshold interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an plcpLineIndex object
instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmTCADayDs3FarEndCCV |
1.3.6.1.4.1.321.1.3036.9008.1.3 |
The performance alert threshold for DS3
layer Far End C-bit Code Violation in 24 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3FarEndCES |
1.3.6.1.4.1.321.1.3036.9008.1.4 |
The performance alert threshold for DS3
Far End C-bit Errored Seconds,
in 24 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3FarEndCSES |
1.3.6.1.4.1.321.1.3036.9008.1.5 |
The performance alert threshold for DS3
Far End C-bit Severely Errored Seconds,
in 24 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3FarEndLUAS |
1.3.6.1.4.1.321.1.3036.9008.1.6 |
The performance alert threshold for DS3 layer
Far End Line Unavailable Seconds in 24 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3LCV |
1.3.6.1.4.1.321.1.3036.9008.1.7 |
The performance alert threshold for DS3
layer Line code Violation in 24 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3LES |
1.3.6.1.4.1.321.1.3036.9008.1.8 |
The performance alert threshold for DS3
layer Line Errored Second in 24 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3LSESs |
1.3.6.1.4.1.321.1.3036.9008.1.9 |
The performance alert threshold for DS3
layer Line Severely Errored Second
in 24 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3PCV |
1.3.6.1.4.1.321.1.3036.9008.1.10 |
The performance alert threshold for DS3
layer Parity Code Violation in 24 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3PES |
1.3.6.1.4.1.321.1.3036.9008.1.11 |
The performance alert threshold for DS3
layer Parity Errored Second in 24 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3PSES |
1.3.6.1.4.1.321.1.3036.9008.1.12 |
The performance alert threshold for DS3
layer Parity Severely Errored Second in 24 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3CCV |
1.3.6.1.4.1.321.1.3036.9008.1.13 |
The performance alert threshold for DS3
layer C-bit Code Violation in 24 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3CES |
1.3.6.1.4.1.321.1.3036.9008.1.14 |
The performance alert threshold for DS3
C-bit Errored Seconds, in 24 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3CSES |
1.3.6.1.4.1.321.1.3036.9008.1.15 |
The performance alert threshold for DS3
C-bit Severely Errored Seconds, in 24 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3SEFS |
1.3.6.1.4.1.321.1.3036.9008.1.16 |
The performance alert threshold for DS3
layer Severely Errored Framing Seconds
in 24 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3AISS |
1.3.6.1.4.1.321.1.3036.9008.1.17 |
The performance alert threshold for DS3
layer Alarm Indication Signal Second
in 24 hour boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3LUASs |
1.3.6.1.4.1.321.1.3036.9008.1.18 |
The performance alert threshold for DS3
layer Unavailable Second in 24 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3LOSSs |
1.3.6.1.4.1.321.1.3036.9008.1.19 |
The performance alert threshold for DS3
Loss of Signal (LOS) Seconds in 24 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTCADayDs3LOFSs |
1.3.6.1.4.1.321.1.3036.9008.1.20 |
The performance alert threshold for DS3
Loss of Frame (LOF) Seconds in 24 hour
boundary. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4294967295 |
|
ncmhdmTxAlarmEntry |
1.3.6.1.4.1.321.1.3036.9009.1 |
An entry in the DS3/E3 Transmit Alarm table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmTxAlarmEntry |
|
|
ncmhdmTxAlarmNIDIndex |
1.3.6.1.4.1.321.1.3036.9009.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmTxAlarmIndex |
1.3.6.1.4.1.321.1.3036.9009.1.2 |
The index value which uniquely identifies the
Transmit Alarm interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an Dsx3LineIndex object
instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmTxYellowAlarm |
1.3.6.1.4.1.321.1.3036.9009.1.3 |
Transmit the near-end yellow alarm. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
eNABLE(1), dISABLE(2) |
|
ncmhdmTxAIS |
1.3.6.1.4.1.321.1.3036.9009.1.4 |
Transmit the near-end AIS alarm. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
eNABLE(1), dISABLE(2) |
|
ncmhdmTxIdleSignal |
1.3.6.1.4.1.321.1.3036.9009.1.5 |
Transmit the near-end Idle alarm. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
eNABLE(1), dISABLE(2) |
|
ncmhdmTxFEBE |
1.3.6.1.4.1.321.1.3036.9009.1.6 |
Near end unit transmits the FEBE alarm. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
eNABLE(1), dISABLE(2) |
|
ncmhdmTxFEACAlarm |
1.3.6.1.4.1.321.1.3036.9009.1.7 |
This object describes which, if any, FEAC
Alarm is enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
nO-FEAC-Alarm-enabled(1), eqptFailureSA-Alarm(2), lOSHBER-Alarm(3), oOF-Alarm(4), aISReceived-Alarm(5), idleReceived-Alarm(6), eqptFailureNSA-Alarm(7), commonEqptFailureNSA-Alarm(8) |
|
ncmhdmDs3StatEntry |
1.3.6.1.4.1.321.1.3036.9010.1 |
An entry in the ds3 stats table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NcmhdmDs3StatEntry |
|
|
ncmhdmDs3StatNIDIndex |
1.3.6.1.4.1.321.1.3036.9010.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmDs3StatIndex |
1.3.6.1.4.1.321.1.3036.9010.1.2 |
The index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmDs3StatAIS |
1.3.6.1.4.1.321.1.3036.9010.1.3 |
Port Status AIS off/on. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmDs3StatIdle |
1.3.6.1.4.1.321.1.3036.9010.1.4 |
port Status Idle off/on. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmDs3StatYellowAlm |
1.3.6.1.4.1.321.1.3036.9010.1.5 |
Port Status Yellow Alarm off/on. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmDs3StatFrameLoss |
1.3.6.1.4.1.321.1.3036.9010.1.6 |
off/on. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmDs3StatSigLoss |
1.3.6.1.4.1.321.1.3036.9010.1.7 |
Port Status Signal Loss off/on. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmDs3StatPLCPYellow |
1.3.6.1.4.1.321.1.3036.9010.1.8 |
Port Status PLCP Yellow Alarm off/on. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmDs3StatPLCPFrmLoss |
1.3.6.1.4.1.321.1.3036.9010.1.9 |
Port Status PLCP Frame Loss off/on. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmDs3StatPLCPOOF |
1.3.6.1.4.1.321.1.3036.9010.1.10 |
Port Status PLCP Out of Frame off/on. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
oFF(1), oN(2) |
|
ncmhdmDs3LpbkLocal |
1.3.6.1.4.1.321.1.3036.9010.1.11 |
Local Loopback enabled/disabled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
ncmhdmDs3LpbkPayload |
1.3.6.1.4.1.321.1.3036.9010.1.12 |
Payload Loopback enabled/disabled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
ncmhdmDs3LpbkFEAC |
1.3.6.1.4.1.321.1.3036.9010.1.13 |
FEAC Loopback enabled/disabled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
ncmhdmDs3LpbkFarEnd |
1.3.6.1.4.1.321.1.3036.9010.1.14 |
Far end Loopback enabled/disabled. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
ncmhdmds3LPBKEntry |
1.3.6.1.4.1.321.1.3036.9011.1 |
An entry in the DS3 Loopback table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ncmhdmds3LPBKEntry |
|
|
ncmhdmLPBKNIDIndex |
1.3.6.1.4.1.321.1.3036.9011.1.1 |
This variable indicates the node id value of the node. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7fffffff |
|
ncmhdmds3LPBKIndex |
1.3.6.1.4.1.321.1.3036.9011.1.2 |
The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
ncmhdmDs3LPBKActivation |
1.3.6.1.4.1.321.1.3036.9011.1.3 |
Ds3 Loopback enabled/disabled, and Ds3 Loopback Type. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no-Loopback(1), dS3-Internal-Activate(2), dS3-Internal-De-activate(3), dS3-Payload-Activate(4), dS3-Payload-De-activate(5), hSSI-A-Activate(6), hSSI-A-De-activate(7), hSSI-B-Activate(8), hSSI-B-De-activate(9), fEAC-Activate(10), fEAC-De-activate(11), far-End-Lpbk-Activate(12), far-End-Lpbk-De-activate(13) |
|