VIDEOFRAME-SIGMON-VM0006-MIB

File: VIDEOFRAME-SIGMON-VM0006-MIB.mib (10727 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
SNMPv2-CONF VIDEOFRAME-REGISTRATIONS-MIB VIDEOFRAME-GENERIC-MIB
VIDEOFRAME-SIGMON-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY OBJECT-IDENTITY
NOTIFICATION-TYPE IpAddress DisplayString
RowStatus MODULE-COMPLIANCE OBJECT-GROUP
vfMIBModules vfBoxId vfSigmonFrameModuleTypes
vfProductsVF200Reg vfFrameSlotNumber

Defined Types

Vm0006Entry  
SEQUENCE    
  vm0006SlotNumber INTEGER
  vm0006Active INTEGER
  vm0006Locate INTEGER

Vm0006GPISignalEntry  
SEQUENCE    
  vm0006GPISignalSlotNumber INTEGER
  vm0006GPISignalNumber INTEGER
  vm0006GPISignalState INTEGER
  vm0007GPIChandedAck INTEGER
  vm0006GPISignalName DisplayString
  vm0006GPISignalDescription DisplayString
  vm0006GPISignalTrapEnable INTEGER

Defined Values

videoframeSigmonVm0006MIB 1.3.6.1.4.1.4596.6.1.6
This MIB describes the device specific objects of the VM0006 GPI Interface Module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc.
MODULE-IDENTITY    

vfProductsVM0006 1.3.6.1.4.1.4596.6.2.5.6
Videoframe VM0006 GPO Interface (Relay) Module.
Status: current Access: read-only
OBJECT-IDENTITY    

vm0006GPIInterface 1.3.6.1.4.1.4596.4.2.1.6
OBJECT IDENTIFIER    

vm0006Table 1.3.6.1.4.1.4596.4.2.1.6.1
Each row contains information about one VM0006 GPI Interface module in the managed VF200 frame.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Vm0006Entry

vm0006Entry 1.3.6.1.4.1.4596.4.2.1.6.1.1
A GPI Interface module entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Vm0006Entry  

vm0006SlotNumber 1.3.6.1.4.1.4596.4.2.1.6.1.1.1
The slot that this entry represents.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

vm0006Active 1.3.6.1.4.1.4596.4.2.1.6.1.1.2
Indicates whether this entry is active (this module is in this slot).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

vm0006Locate 1.3.6.1.4.1.4596.4.2.1.6.1.1.3
Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flash(1), off(2)  

vm0006GPISignalTable 1.3.6.1.4.1.4596.4.2.1.6.2
Each row contains information about one GPI signal of one VM0006 GPI Interface module in the managed VF200 frame.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Vm0006GPISignalEntry

vm0006GPISignalEntry 1.3.6.1.4.1.4596.4.2.1.6.2.1
A GPI Interface module GPI signal entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Vm0006GPISignalEntry  

vm0006GPISignalSlotNumber 1.3.6.1.4.1.4596.4.2.1.6.2.1.1
The frame slot number that this entry represents.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

vm0006GPISignalNumber 1.3.6.1.4.1.4596.4.2.1.6.2.1.2
The GPI number within the module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

vm0006GPISignalState 1.3.6.1.4.1.4596.4.2.1.6.2.1.3
Indicates the current state of this GPI signal.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER high(1), low(2)  

vm0007GPIChandedAck 1.3.6.1.4.1.4596.4.2.1.6.2.1.4
When Auto Re-Arm is set to off, set to acknowledge (3) to acknowledge a triggered gpiChanged notification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), unacknowledged(2), acknowledge(3)  

vm0006GPISignalName 1.3.6.1.4.1.4596.4.2.1.6.2.1.5
The name of this GPI signal.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

vm0006GPISignalDescription 1.3.6.1.4.1.4596.4.2.1.6.2.1.6
Descriptive identification of this GPI signal.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..120)  

vm0006GPISignalTrapEnable 1.3.6.1.4.1.4596.4.2.1.6.2.1.7
Enables or disables trap generation from this GPI signal.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vm0006GPIInterfaceEvents 1.3.6.1.4.1.4596.4.2.1.6.3
OBJECT IDENTIFIER    

vm0006GPIInterfaceEventsV2 1.3.6.1.4.1.4596.4.2.1.6.3.0
OBJECT IDENTIFIER    

gpiChanged 1.3.6.1.4.1.4596.4.2.1.6.3.0.1
One or more GPIs, for which traps are enabled, has changed state.
Status: current Access: read-write
NOTIFICATION-TYPE