VTGW-MIB
File:
VTGW-MIB.mib (65197 bytes)
Imported modules
Imported symbols
Defined Types
CodecEntry |
|
SEQUENCE |
|
|
|
|
coder |
INTEGER |
|
|
vadEnable |
INTEGER |
|
|
coderRate |
INTEGER |
|
|
framesPerPkt |
INTEGER |
|
|
framesSize |
INTEGER |
|
|
jitter |
DisplayString |
|
|
jitterOptFactor |
DisplayString |
|
|
coderRedundency |
INTEGER |
|
PortEntry |
|
SEQUENCE |
|
|
|
|
portNumber |
INTEGER |
|
|
portEnable |
INTEGER |
|
|
connectedTo |
INTEGER |
|
|
boundDirection |
INTEGER |
|
|
dialingMode |
INTEGER |
|
|
detectionMode |
INTEGER |
|
|
ivrMode |
INTEGER |
|
|
repeatIVR |
INTEGER |
|
|
overSilenceTime |
INTEGER |
|
|
comment |
DisplayString |
|
Defined Values
vocaltec |
1.3.6.1.4.1.2516 |
OBJECT IDENTIFIER |
|
|
|
vtg |
1.3.6.1.4.1.2516.2 |
OBJECT IDENTIFIER |
|
|
|
tgw |
1.3.6.1.4.1.2516.2.1 |
OBJECT IDENTIFIER |
|
|
|
vnmvgk |
1.3.6.1.4.1.2516.2.2 |
OBJECT IDENTIFIER |
|
|
|
hasp |
1.3.6.1.4.1.2516.2.3 |
OBJECT IDENTIFIER |
|
|
|
audio |
1.3.6.1.4.1.2516.2.4 |
OBJECT IDENTIFIER |
|
|
|
ports |
1.3.6.1.4.1.2516.2.5 |
OBJECT IDENTIFIER |
|
|
|
ivr |
1.3.6.1.4.1.2516.2.6 |
OBJECT IDENTIFIER |
|
|
|
stat |
1.3.6.1.4.1.2516.2.8 |
OBJECT IDENTIFIER |
|
|
|
analog |
1.3.6.1.4.1.2516.2.7.1 |
OBJECT IDENTIFIER |
|
|
|
enm |
1.3.6.1.4.1.2516.2.7.2 |
OBJECT IDENTIFIER |
|
|
|
gc |
1.3.6.1.4.1.2516.2.7.3 |
OBJECT IDENTIFIER |
|
|
|
pri |
1.3.6.1.4.1.2516.2.7.4 |
OBJECT IDENTIFIER |
|
|
|
erbium |
1.3.6.1.4.1.2516.2.7.5 |
OBJECT IDENTIFIER |
|
|
|
iridium |
1.3.6.1.4.1.2516.2.7.7 |
OBJECT IDENTIFIER |
|
|
|
resloveMode |
1.3.6.1.4.1.2516.2.1.3 |
Resolving mode of the destination gateway IP
address: can be done by a gatekeeper or localy
at the VTGW by dialing plan. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
gatekeeper(1), local(2) |
|
telephonyProtocol |
1.3.6.1.4.1.2516.2.1.4 |
The telephony protocol used by VTGW. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
analog(1), pri(2), enm(3), gc(4), erbium(5), carbon(6), iridium(7) |
|
internetProtocol |
1.3.6.1.4.1.2516.2.1.5 |
The Internet protocol used by VTGW. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
classic(1), h323(2), dm3(3), cobalt(4) |
|
universalLinesNumber |
1.3.6.1.4.1.2516.2.1.6 |
The maximum number of universal (vioce and fax
capability) lines,that can be licensed on this VTGW. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
voiceLinesNumber |
1.3.6.1.4.1.2516.2.1.7 |
The maximum number of voice lines,that can be
licensed on this VTGW. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
faxLinesNumber |
1.3.6.1.4.1.2516.2.1.8 |
The maximum number of fax lines,that can be
licensed on this VTGW. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sncLinesNumber |
1.3.6.1.4.1.2516.2.1.9 |
The maximum number of Surf & Call lines,that can be
licensed on this VTGW. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iPhoneLinesNumber |
1.3.6.1.4.1.2516.2.1.10 |
The maximum number of iPhone lines,that can be
licensed on this VTGW. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dialerLinesNumber |
1.3.6.1.4.1.2516.2.1.11 |
The maximum number of Dialer lines,that can be
licensed on this VTGW. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
cti2ServicePollingQuantum |
1.3.6.1.4.1.2516.2.1.14 |
CTI2 service polling quantum (sec). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rcamPort |
1.3.6.1.4.1.2516.2.2.1 |
VNM (RCAM) port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
id |
1.3.6.1.4.1.2516.2.2.2 |
VGK ID. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
alias |
1.3.6.1.4.1.2516.2.2.3 |
VGK Alias. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
time2Live |
1.3.6.1.4.1.2516.2.2.5 |
Time in seconds to live acknowledge to VGK. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
loginSetAttempts |
1.3.6.1.4.1.2516.2.2.6 |
Login attempts to VGK within a set. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
timeB4LoginAttempt |
1.3.6.1.4.1.2516.2.2.7 |
Time in seconds before the next login
attempt to VGK within a set. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
timeB4LoginSet |
1.3.6.1.4.1.2516.2.2.8 |
Time in seconds before the next login
set to VGK. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rasPort |
1.3.6.1.4.1.2516.2.2.30 |
The port for connecting the VGK. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
codecsPriorities |
1.3.6.1.4.1.2516.2.4.1 |
Prioritized list of active codecs ex: 7 1 2 5 8 20 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
preferredCodec |
1.3.6.1.4.1.2516.2.4.2 |
Preferred codec. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
outputGain |
1.3.6.1.4.1.2516.2.4.3 |
Output volume gain. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
codecsTable |
1.3.6.1.4.1.2516.2.4.5 |
codecs array of structures. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CodecEntry |
|
codecEntry |
1.3.6.1.4.1.2516.2.4.5.1 |
Codec entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CodecEntry |
|
|
coder |
1.3.6.1.4.1.2516.2.4.5.1.1 |
Coder number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
g711a(1), g711m(2), g723(3), g729(4), gsm(5), g726(6), g727(7), g728(8), vsc(9), vhqc4800(10), vhqc5600(11), vhqc6400(12), vhqc7200(13), vhqc8000(14), vhqc8800(15), vhqc9600(16) |
|
vadEnable |
1.3.6.1.4.1.2516.2.4.5.1.2 |
VAD enable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
coderRate |
1.3.6.1.4.1.2516.2.4.5.1.3 |
Coder Rate. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
framesPerPkt |
1.3.6.1.4.1.2516.2.4.5.1.4 |
Frames Per Pkt. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
framesSize |
1.3.6.1.4.1.2516.2.4.5.1.5 |
Frames Size. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
jitter |
1.3.6.1.4.1.2516.2.4.5.1.6 |
Jitter Min. Delay. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
coderRedundency |
1.3.6.1.4.1.2516.2.4.5.1.8 |
CoderRedundency. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
portsTable |
1.3.6.1.4.1.2516.2.5.1 |
Ports array of structures. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PortEntry |
|
portEntry |
1.3.6.1.4.1.2516.2.5.1.1 |
Port entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PortEntry |
|
|
portNumber |
1.3.6.1.4.1.2516.2.5.1.1.1 |
Port number. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
portEnable |
1.3.6.1.4.1.2516.2.5.1.1.2 |
Port enable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
connectedTo |
1.3.6.1.4.1.2516.2.5.1.1.3 |
Connected to. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
pbx(1), pstn(2) |
|
boundDirection |
1.3.6.1.4.1.2516.2.5.1.1.4 |
Bound direction. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inbound(1), outbound(2), bidirectional(3) |
|
dialingMode |
1.3.6.1.4.1.2516.2.5.1.1.5 |
Dialing mode. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dialing-dtmf(1), dialing-pulse(2), dialing-mf(3) |
|
detectionMode |
1.3.6.1.4.1.2516.2.5.1.1.6 |
Detection mode. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
detection-dtmf(1), detection-lpd(2), detection-apd(3), detection-mf(4), detection-dpd(5), detection-dpd2(6) |
|
ivrMode |
1.3.6.1.4.1.2516.2.5.1.1.7 |
IVR mode. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
numberphone(1), numberpin(2), phonepin(3), pbx(4), ani(5), dnis(6) |
|
repeatIVR |
1.3.6.1.4.1.2516.2.5.1.1.8 |
Repeat IVR. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
overSilenceTime |
1.3.6.1.4.1.2516.2.5.1.1.9 |
OverSilence time. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
interDigitTimeout |
1.3.6.1.4.1.2516.2.6.1 |
Inter digit timeout. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
digitsTimeout |
1.3.6.1.4.1.2516.2.6.2 |
Timeout for all digits. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
channelSelectionOrder |
1.3.6.1.4.1.2516.2.7.20 |
Order in which the selection is done - Up (1) or Down (2) only. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
glareMode |
1.3.6.1.4.1.2516.2.7.21 |
Glare mode selection - YIELD (1) or STAND (2) only. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yield(1), stand(2) |
|
ringCount |
1.3.6.1.4.1.2516.2.7.1.21 |
Number of rings before returning the ring event. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
volume |
1.3.6.1.4.1.2516.2.7.1.22 |
Engine volume control. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
idle |
1.3.6.1.4.1.2516.2.7.2.1 |
Idle bits, default=00-- |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
outOfService |
1.3.6.1.4.1.2516.2.7.2.2 |
Out Of Service bits, default=1101 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
seizeOutbound |
1.3.6.1.4.1.2516.2.7.2.3 |
Seize Outbound bits, default=11-- |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
seizeInbound |
1.3.6.1.4.1.2516.2.7.2.4 |
Seize Inbound bits, default=11-- |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
seizeAckOutbound |
1.3.6.1.4.1.2516.2.7.2.5 |
Seize Acknowledge Outbound bits, default=W--- |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
seizeAckInbound |
1.3.6.1.4.1.2516.2.7.2.6 |
Seize Acknowledge Inbound bits, default=W--- |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
answerOutbound |
1.3.6.1.4.1.2516.2.7.2.7 |
Answer Outbound bits, default=11-- |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
answerInbound |
1.3.6.1.4.1.2516.2.7.2.8 |
Answer Inbound bits, default=11-- |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
dropOutbound |
1.3.6.1.4.1.2516.2.7.2.9 |
Drop Outbound bits, default=00-- |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
dropInbound |
1.3.6.1.4.1.2516.2.7.2.10 |
Drop Inbound bits, , default=00-- |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
noAnswerSec |
1.3.6.1.4.1.2516.2.7.2.11 |
Length of time to wait after first ring back before deciding that the call isn't answered, in 10 mSec, default=3000. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
continuesNoSignal |
1.3.6.1.4.1.2516.2.7.2.12 |
The max. length of time that no ringback was returned, in 10 mSec, default=4000. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
helloEdge |
1.3.6.1.4.1.2516.2.7.2.13 |
When to tell the app. that the remote connected, 1=Rising Endge - Immediately when connect is detected, 2=Falling Endge - After the end of the solution. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
maxInterRing |
1.3.6.1.4.1.2516.2.7.2.14 |
The max time between ring backs to decide that the call connected, in 10 mSec, default=800. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dialToneLocal |
1.3.6.1.4.1.2516.2.7.2.15 |
Local Dial tone, default= . |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
dialToneIntl |
1.3.6.1.4.1.2516.2.7.2.16 |
International Dial tone, default= . |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
busy1Tone |
1.3.6.1.4.1.2516.2.7.2.18 |
Busy 1 tone, default= . |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
busy2Tone |
1.3.6.1.4.1.2516.2.7.2.19 |
Busy 2 tone, default= . |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ringback1Tone |
1.3.6.1.4.1.2516.2.7.2.20 |
Ringback 1 tone, default= . |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ringback2Tone |
1.3.6.1.4.1.2516.2.7.2.21 |
Ringback 2 tone, default= . |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
waitForDropAckTimer |
1.3.6.1.4.1.2516.2.7.2.24 |
The time to wait for drop ack, in mSec, default=2000. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
waitForSiezeAckTimer |
1.3.6.1.4.1.2516.2.7.2.25 |
The time to wait for sieze ack, in mSec, default=10000. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
digitsMode |
1.3.6.1.4.1.2516.2.7.2.26 |
The pormat of sending the digits - 'T'=DTMF, 'M'=MF, 'P'=PULSE, default='T'. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
isDnisBeforeAni |
1.3.6.1.4.1.2516.2.7.2.27 |
Does the ANI is previous to the DNIS, if 1(TRUE) - DNIS is before the ANI, default=1(TRUE). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
collectAni |
1.3.6.1.4.1.2516.2.7.2.28 |
Should the engine expect ANI. Default=1(TRUE) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
prewinkLength |
1.3.6.1.4.1.2516.2.7.2.29 |
The max. length in 10mSec of the pre-wink. Default=0 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
winkLength |
1.3.6.1.4.1.2516.2.7.2.30 |
The max. length of the wink generation, in 10 mSec. Default=15 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
minWinkDetection |
1.3.6.1.4.1.2516.2.7.2.31 |
The min. time in the receiver for detecting the wink, in 10 mSec. Default=10 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
maxWinkDetection |
1.3.6.1.4.1.2516.2.7.2.32 |
The max. time in the receiver for detecting the wink, in 10 mSec. Default=32 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
maxDigitsDnis |
1.3.6.1.4.1.2516.2.7.2.33 |
The max. # of DNIS digits for the receiver/transmiter. The max. # of digits for the DNIS+ANI in hardware dependenc-31. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
maxDigitsAni |
1.3.6.1.4.1.2516.2.7.2.34 |
The max.# of ANI digits for the receiver/transmiter. The max.# of digits for the DNIS+ANI in hardware dependenc-31. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
minTimeToDetectTransition |
1.3.6.1.4.1.2516.2.7.2.35 |
The min. time to detect transition from 0 to 1 and from 1 to 0, in 10mSec. Default=5 (max. value is 255) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
charBeforedigits |
1.3.6.1.4.1.2516.2.7.2.36 |
the character before the digits, Default - '*', if there isnt any '' will be used |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
charBetweenAniAndDnis |
1.3.6.1.4.1.2516.2.7.2.37 |
If there is ANI - this is the char between the DNIS and the ANI, Default - '*', if there isnt any '' will be used |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
charInTheEndOfDigits |
1.3.6.1.4.1.2516.2.7.2.38 |
The char in the end of digits, Default - '*', if there isnt any '' will be used |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sendCharBeforeDigits |
1.3.6.1.4.1.2516.2.7.2.39 |
The char before the digits, Default - '*', if there isnt any '' will be used |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sendDnisbeforeAni |
1.3.6.1.4.1.2516.2.7.2.40 |
Does ANI is previous to the DNIS, if TRUE DNIS will be sent before the ANI, default DNIS before the ANI |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sendCharBetweenAniAndDnis |
1.3.6.1.4.1.2516.2.7.2.41 |
If there is ANI - this is the char between the DNIS and the ANI, Default - '*', if there isnt any '' will be used |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
fileToPlay |
1.3.6.1.4.1.2516.2.7.2.43 |
Path+name of .WAV file to play to user in case of Clear-Back. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
repeatPlayFile |
1.3.6.1.4.1.2516.2.7.2.44 |
Loop the playing of the Clear-Back .WAV file - '0' or '1' only. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
protocolTrace |
1.3.6.1.4.1.2516.2.7.4.2 |
Activating Dialogic PRI log tracer. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
hostID |
1.3.6.1.4.1.2516.2.7.7.2 |
SS#7 host ID can be from 0-31. Default = 0. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sIUIPorID |
1.3.6.1.4.1.2516.2.7.7.3 |
SIU IP address or ID. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
vgkDisconnectionTotal |
1.3.6.1.4.1.2516.2.8.17 |
GateKeeper disconnection failure total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
callValue |
1.3.6.1.4.1.2516.2.8.19 |
Calls value. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
callInterval |
1.3.6.1.4.1.2516.2.8.20 |
Calls interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
callMaxTotal |
1.3.6.1.4.1.2516.2.8.21 |
Calls max total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
callMaxInterval |
1.3.6.1.4.1.2516.2.8.22 |
Calls max interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
callAverageTotal |
1.3.6.1.4.1.2516.2.8.23 |
Calls average total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
callAverageInterval |
1.3.6.1.4.1.2516.2.8.24 |
Calls average interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
callTotal |
1.3.6.1.4.1.2516.2.8.25 |
Calls total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
universalCallValue |
1.3.6.1.4.1.2516.2.8.26 |
Universal calls value. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
universalCallMaxTotal |
1.3.6.1.4.1.2516.2.8.28 |
Universal calls max total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
universalCallMaxInterval |
1.3.6.1.4.1.2516.2.8.29 |
Universal calls max interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
universalCallAverageTotal |
1.3.6.1.4.1.2516.2.8.30 |
Universal calls average total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
universalCallAverageInterval |
1.3.6.1.4.1.2516.2.8.31 |
Universal calls average interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
voiceCallValue |
1.3.6.1.4.1.2516.2.8.33 |
Voice calls value. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
voiceCallMaxTotal |
1.3.6.1.4.1.2516.2.8.35 |
Voice calls max total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
voiceCallMaxInterval |
1.3.6.1.4.1.2516.2.8.36 |
Voice calls max interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
voiceCallAverageTotal |
1.3.6.1.4.1.2516.2.8.37 |
Voice calls average total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
voiceCallAverageInterval |
1.3.6.1.4.1.2516.2.8.38 |
Voice calls average interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
voiceCallTotal |
1.3.6.1.4.1.2516.2.8.39 |
Voice calls total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
faxCallValue |
1.3.6.1.4.1.2516.2.8.40 |
Fax calls value. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
faxCallInterval |
1.3.6.1.4.1.2516.2.8.41 |
Fax calls interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
faxCallMaxTotal |
1.3.6.1.4.1.2516.2.8.42 |
Fax calls max total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
faxCallMaxInterval |
1.3.6.1.4.1.2516.2.8.43 |
Fax calls max interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
faxCallAverageTotal |
1.3.6.1.4.1.2516.2.8.44 |
Fax calls average total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
faxCallAverageInterval |
1.3.6.1.4.1.2516.2.8.45 |
Fax calls average interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
faxCallTotal |
1.3.6.1.4.1.2516.2.8.46 |
Fax calls total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
sncCallValue |
1.3.6.1.4.1.2516.2.8.47 |
S&C calls value. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sncCallInterval |
1.3.6.1.4.1.2516.2.8.48 |
S&C calls interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
sncCallMaxTotal |
1.3.6.1.4.1.2516.2.8.49 |
S&C calls max total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sncCallMaxInterval |
1.3.6.1.4.1.2516.2.8.50 |
S&C calls max interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sncCallAverageTotal |
1.3.6.1.4.1.2516.2.8.51 |
S&C calls average total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sncCallAverageInterval |
1.3.6.1.4.1.2516.2.8.52 |
S&C calls average interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sncCallTotal |
1.3.6.1.4.1.2516.2.8.53 |
S&C calls total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
iPhoneCallValue |
1.3.6.1.4.1.2516.2.8.54 |
iPhone calls value. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iPhoneCallMaxTotal |
1.3.6.1.4.1.2516.2.8.56 |
iPhone calls max total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iPhoneCallMaxInterval |
1.3.6.1.4.1.2516.2.8.57 |
iPhone calls max interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iPhoneCallAverageTotal |
1.3.6.1.4.1.2516.2.8.58 |
iPhone calls average total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iPhoneCallAverageInterval |
1.3.6.1.4.1.2516.2.8.59 |
iPhone calls average interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iPhoneCallTotal |
1.3.6.1.4.1.2516.2.8.60 |
iPhone calls total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
dialerCallValue |
1.3.6.1.4.1.2516.2.8.61 |
Dialer calls value. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dialerCallMaxTotal |
1.3.6.1.4.1.2516.2.8.63 |
Dialer calls max total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dialerCallMaxInterval |
1.3.6.1.4.1.2516.2.8.64 |
Dialer calls max interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dialerCallAverageTotal |
1.3.6.1.4.1.2516.2.8.65 |
Dialer calls average total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dialerCallAverageInterval |
1.3.6.1.4.1.2516.2.8.66 |
Dialer calls average interval. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dialerCallTotal |
1.3.6.1.4.1.2516.2.8.67 |
Dialer calls total. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
telephonyErrorDescription |
1.3.6.1.4.1.2516.2.9.1 |
Detailed description of telephony protocol
error occurs. Used with telephonyError
enterprise trap. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|