WAG102

File: WAG102.mib (43147 bytes)

Imported modules

SNMPv2-CONF

SNMPv2-SMI

SNMPv2-TC

Imported symbols

OBJECT-GROUP	MODULE-IDENTITY	OBJECT-TYPE
Unsigned32	enterprises	IpAddress
DisplayString	TruthValue

Defined Types

WlanSettingEntry
SEQUENCE
	radioIndex	INTEGER
	radioEnable	TruthValue
	wirelessMode	INTEGER
	channel	INTEGER
	txRate	INTEGER
	txPower	INTEGER
	beaconInterval	INTEGER
	dtimInterval	INTEGER
	rtsThreshold	INTEGER
	fragmentationThreshold	INTEGER
	dot11bPreamble	INTEGER
	superMode	TruthValue
	wmm	TruthValue
	wmmNoAck	TruthValue
	accessControlMode	INTEGER

WlanSecurityEntry
SEQUENCE
	securityProfileNo	INTEGER
	securityProfileEnabled	TruthValue
	securityProfileName	DisplayString
	ssid	DisplayString
	ssidBroadcastEnable	TruthValue
	authentication	INTEGER
	encryption	INTEGER
	wepKey1	DisplayString
	wepKey2	DisplayString
	wepKey3	DisplayString
	wepKey4	DisplayString
	wepKeyDefault	INTEGER
	wpaPSK	DisplayString
	wlanSeparatorEnable	TruthValue

WlanAccessControlLocalEntry
SEQUENCE
	aclIndex	INTEGER
	aclMAC	DisplayString

WlanWdsEntry
SEQUENCE
	operationMode	INTEGER
	localMacAddress	DisplayString
	ptpRemoteMacAddress	DisplayString
	pxpRemoteMacAddress1	DisplayString
	pxpRemoteMacAddress2	DisplayString
	pxpRemoteMacAddress3	DisplayString
	pxpRemoteMacAddress4	DisplayString
	repeaterParentMacAddress	DisplayString
	repeaterChildMacAddress	DisplayString

WlanClientsEntry
SEQUENCE
	clientIndex	INTEGER
	clientMacAddress	DisplayString
	clientIP	IpAddress
	clientSSID	DisplayString
	clientStatus	INTEGER

SecurityProfileVlanEntry
SEQUENCE
	profileNo	INTEGER
	profileVlan	INTEGER

WirelessStatEntry
SEQUENCE
	wlanSecurityProfileNo	INTEGER
	wlanInPacketsUnicast	Unsigned32
	wlanOutPacketsUnicast	Unsigned32
	wlanInPacketsBroadcast	Unsigned32
	wlanOutPacketsBroadcast	Unsigned32
	wlanInPacketsMulticast	Unsigned32
	wlanOutPacketsMulticast	Unsigned32
	wlanInPacketsTotal	Unsigned32
	wlanOutPacketsTotal	Unsigned32
	wlanInBytesTotal	Unsigned32
	wlanOutBytesTotal	Unsigned32

Defined Values

wag102		1.3.6.1.4.1.4526.4.5
The MIB module for 802.11a/b/g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wag102(5)
MODULE-IDENTITY

netgear		1.3.6.1.4.1.4526
OBJECT IDENTIFIER

wireless		1.3.6.1.4.1.4526.4
OBJECT IDENTIFIER

sysSettings		1.3.6.1.4.1.4526.4.5.1
OBJECT IDENTIFIER

sysMacAddress		1.3.6.1.4.1.4526.4.5.1.1
This field indicates the system MAC Address.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(6..17)

sysVersion		1.3.6.1.4.1.4526.4.5.1.2
This field indicates the system firmware version.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

sysAPName		1.3.6.1.4.1.4526.4.5.1.3
This field indicates the name of AP. The name is also the NETBIOS name of the AP.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

sysAdminName		1.3.6.1.4.1.4526.4.5.1.4
This field indicates the administrator name, which is used to sign in web GUI, SSH, CLI, and FTP server of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(0..32)

sysAdminPasswd		1.3.6.1.4.1.4526.4.5.1.5
This field indicates the administrator password, which is used to sign in web GUI, SSH, CLI, and FTP server of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(0..32)

sysCountryRegion		1.3.6.1.4.1.4526.4.5.1.7
This field indicates the country/region of the AP.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	asia(410), australia(36), canada(124), denmark(208), europe(40), finland(246), france(250), germany(276), ireland(372), italy(380), japan(392), mexico(484), netherlands(528), newZealand(554), norway(578), puertoRico(630), southAmerica(340), spain(724), sweden(752), switzerland(756), unitedKingdom(826), unitedStates(840)

timeSettings		1.3.6.1.4.1.4526.4.5.1.8
OBJECT IDENTIFIER

timeCurrentTime		1.3.6.1.4.1.4526.4.5.1.8.1
This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..20)

timeTimeZone		1.3.6.1.4.1.4526.4.5.1.8.2
This field indicates the timezone of the system. 0 UK,GreenWich,Casablanca,Monrovia (GMT), -12 Eniwetok,Kwajalein (GMT-12:00), -11 Midway I., Samoa (GMT-11:00), -10 Hawaii (GMT-10:00), -9.5 Marqesas Is. (GMT-09:30), -9 Alaska (GMT-09:00), -8.5 Pitciarn Is. (GMT-08:30), -8 Pacific Time ..US and Canada (GMT-08:00), -7 MountainTime(USA),Arizona (GMT-07:00), -6 CentralTime(USA),Mexico City,Tequciqalpa (GMT-06:00), -5 EasternTime(USA),Bogota,Lima,Quito,Indiana East (GMT-05:00), -4 Caracas,La Paz (GMT-04:00), -3.5 Newfoundland (GMT-03:30), -3 Brasilia,Beunos Aires,Georgetown (GMT-03:00), -2 Mid-Atlantic (GMT-02:00), -1 Azores,Cape Verde Is. (GMT-01:00), 1 Europe (GMT+01:00), 2 Egypt,Finland,Romania,Turkey,Greece,Israel,Jordan(GMT+02:00), 3 Iraq, Syria,Russia (GMT+03:00), 3.5 Iran (GMT+03:30), 4 Armenia, Azerbaijan (GMT+04:00), 4.5 Afghanistan (GMT+04:30), 5 Russia,Pakistan (GMT+05:00), 5.5 India (GMT+05:30), 6 Bangladesh,Russia (GMT+06:00), 6.5 Burma (GMT+06:30), 7 Russia,Thailand, Combodia, Laos (GMT+07:00), 8 Russia,China,Mongolia,Indonesia,Philippines,Taiwan,WA (GMT+08:00), 9 Russia,Japan,Korea (GMT+09:00), 9.5 Adelaide,Darwin (GMT+09:30), 10 Eastern Standard(Aust),Russia,Gaum,Papua New Guinea (GMT+10:00)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	gmt00UkGreenWichCasablancaMonrovia(0), gmtwest12EniwetokKwajalein(1), gmtwest11MidwayIslandSamoa(2), gmtwest10Hawaii(3), gmtwest9dot5MarqesasIs(4), gmtwest09Alaska(5), gmtwest8dot5PitciarnIs(6), gmtwest08PacificTimeUsCanada(7), gmtwest07MountainTimeUsArizona(8), gmtwest06CentralTimeUsMexicoCityTequciqalpa(9), gmtwest05EasternTimeUsBogotaLimaQuitoIndianaEast(10), gmtwest04CaracasLaPaz(11), gmtwest3dot5Newfoundland(12), gmtwest03BrasiliaBeunosAiresGeorgetown(13), gmtwest02MidAtlantic(14), gmtwest01AzoresCapeVerdeIs(15), gmteast01Europe(16), gmteast02EgyptFinlandRomaniaTurkeyGreeceIsraelJordan(17), gmteast03IraqSyriaRussia(18), gmteast3dot5Iran(19), gmteast04ArmeniaAzerbaijan(20), gmteast4dot5Afghanistan(21), gmteast05RussiaPakistan(22), gmteast5dot5India(23), gmteast06BangladeshRussia(24), gmteast6dot5Burma(25), gmteast07RussiaThailandCombodiaLaos(26), gmteast08RussiaChinaMongoliaIndonesiaPhilippinesTaiwanWA(27), gmteast09RussiaJapanKorea(28), gmteast9dot5AdelaideDarwin(29), gmteast10EasternStandardAustRussiaGaumPapuaNewGuinea(30)

timeDaylightSaving		1.3.6.1.4.1.4526.4.5.1.8.3
This field indicates whether the Daylight Saving time is used.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ipSettings		1.3.6.1.4.1.4526.4.5.1.9
OBJECT IDENTIFIER

ipDhcpClientEnable		1.3.6.1.4.1.4526.4.5.1.9.1
This field indicates whether DHCP client is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ipIPAddress		1.3.6.1.4.1.4526.4.5.1.9.2
This field indicates the IP address of the AP.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ipNetmask		1.3.6.1.4.1.4526.4.5.1.9.3
This field indicates the netmask addressof the AP.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ipGateway		1.3.6.1.4.1.4526.4.5.1.9.4
This field indicates the default gateway address of the AP.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ipDnsServer		1.3.6.1.4.1.4526.4.5.1.9.5
This field indicates the IP address of the DNS server. *** Note: The value can only be set to an IP address in dot format.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

wlanSettings		1.3.6.1.4.1.4526.4.5.2
OBJECT IDENTIFIER

wlanSettingTable		1.3.6.1.4.1.4526.4.5.2.1
wlanSettingsallow for multiple instances on an agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanSettingEntry

wlanSettingEntry		1.3.6.1.4.1.4526.4.5.2.1.1
An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanSettingEntry

radioIndex		1.3.6.1.4.1.4526.4.5.2.1.1.1
This attribute shall indicate the radio's band.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	dot11a(0), dot11bg(1)

radioEnable		1.3.6.1.4.1.4526.4.5.2.1.1.2
This attribute shall indicate whether the radio is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wirelessMode		1.3.6.1.4.1.4526.4.5.2.1.1.5
This attribute shall indicate the desired wireless operating mode. Options are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11a - Only 802.11a wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	auto(0), dot11a(1), dot11b(2), dot11g(3)

channel		1.3.6.1.4.1.4526.4.5.2.1.1.6
This attribute shall indicate the channel number to be used. And the zero indicates that auto channel selection is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..165

txRate		1.3.6.1.4.1.4526.4.5.2.1.1.7
This attribute shall indicate the transmite rate. When the operatemode is: auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, and 54:54Mb/s. dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, 54:54Mb/s. dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, and 11:11 Mb/s. dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, 54:54Mb/s.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	best(0), rate1Mbps(1), rate2Mbps(2), rate5dot5Mbps(3), rate6Mbps(4), rate9Mbps(5), rate11Mbps(6), rate12Mbps(7), rate18Mbps(8), rate24Mbps(9), rate36Mbps(10), rate48Mbps(11), rate54Mbps(12)

txPower		1.3.6.1.4.1.4526.4.5.2.1.1.8
This attribute shall indicate the transmitting power.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	full(0), half(1), quarter(2), eighth(3), min(4)

beaconInterval		1.3.6.1.4.1.4526.4.5.2.1.1.9
This attribute shall indicate the beacon interval.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	20..1000

dtimInterval		1.3.6.1.4.1.4526.4.5.2.1.1.10
This attribute shall indicate the DTIM period.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

rtsThreshold		1.3.6.1.4.1.4526.4.5.2.1.1.11
This attribute shall indicate the RTS threshold.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2346

fragmentationThreshold		1.3.6.1.4.1.4526.4.5.2.1.1.12
This attribute shall indicate the fragmentation threshold.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	256..2346

dot11bPreamble		1.3.6.1.4.1.4526.4.5.2.1.1.13
This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	long(0), auto(1)

superMode		1.3.6.1.4.1.4526.4.5.2.1.1.14
This attribute shall indicate whether super mode (super-A for 11a radio, Super-G for 11g radio) is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wmm		1.3.6.1.4.1.4526.4.5.2.1.1.15
This attribute shall indicate whether wmm is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wmmNoAck		1.3.6.1.4.1.4526.4.5.2.1.1.16
This attribute shall indicate whether wmm with no ack is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

accessControlMode		1.3.6.1.4.1.4526.4.5.2.1.1.20
The field indicates whether the access control list is enabled and the source of the database of the access control list.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), local(2), server(3)

wlanSecurityTable		1.3.6.1.4.1.4526.4.5.2.2
Security attributes in tablular form to allow for multiple instances on an agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanSecurityEntry

wlanSecurityEntry		1.3.6.1.4.1.4526.4.5.2.2.1
An entry in the securityTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanSecurityEntry

securityProfileNo		1.3.6.1.4.1.4526.4.5.2.2.1.1
The field indicates the security profile NO.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

securityProfileEnabled		1.3.6.1.4.1.4526.4.5.2.2.1.2
This attribute shall indicate whether the security profile is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

securityProfileName		1.3.6.1.4.1.4526.4.5.2.2.1.3
This attribute shall indicate SSID.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ssid		1.3.6.1.4.1.4526.4.5.2.2.1.4
This attribute shall indicate SSID.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ssidBroadcastEnable		1.3.6.1.4.1.4526.4.5.2.2.1.5
This attribute shall indicate whether wireless network Name (SSID) will be broadcasted.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

authentication		1.3.6.1.4.1.4526.4.5.2.2.1.6
The field indicates how to authenticate the station.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	openSystem(0), sharedKey(1), legacy8021x(2), wpaPSK(3), wpaRadius(4), wpa2-psk(5), wpawpa2-psk(6), wpa2-802dot1x(7), wpawpa2-802dot1x(8)

encryption		1.3.6.1.4.1.4526.4.5.2.2.1.7
The field indicates how to encryption the data and the type of WEP key.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), wep64(1), wep128(2), wep152(3), tkip(4), aes-tkip(5), aes(6)

wepKey1		1.3.6.1.4.1.4526.4.5.2.2.1.8
The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

wepKey2		1.3.6.1.4.1.4526.4.5.2.2.1.9
The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

wepKey3		1.3.6.1.4.1.4526.4.5.2.2.1.10
The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

wepKey4		1.3.6.1.4.1.4526.4.5.2.2.1.11
The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

wepKeyDefault		1.3.6.1.4.1.4526.4.5.2.2.1.12
The field shall indicate the WEP key number to encrypt TX data.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4

wpaPSK		1.3.6.1.4.1.4526.4.5.2.2.1.13
This attribute shall indicate WPA Pre-Shared Key.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(8..63)

wlanSeparatorEnable		1.3.6.1.4.1.4526.4.5.2.2.1.14
This attribute shall indicate whether block the communications between two wireless clients.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

wlanAccessControlLocalTable		1.3.6.1.4.1.4526.4.5.2.3
ACL attributes in tablular form to allow for multiple instances on an agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanAccessControlLocalEntry

wlanAccessControlLocalEntry		1.3.6.1.4.1.4526.4.5.2.3.1
An entry in the wlanAccessControlListTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanAccessControlLocalEntry

aclIndex		1.3.6.1.4.1.4526.4.5.2.3.1.1
This field should indicate an index to the access control local database entry. When write this field aclIndex=9999, shall append new MAC address into the local database
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..256 | 9999

aclMAC		1.3.6.1.4.1.4526.4.5.2.3.1.2
This field should indicate an MAC address entry in the access control local database. When write this field aclMAC=000000000000, shall remove current MAC address from local database. Otherwise, shall update the MAC address.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..17)

wlanWdsTable		1.3.6.1.4.1.4526.4.5.2.4
WDS attributes in tablular form to allow for multiple instances on an agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanWdsEntry

wlanWdsEntry		1.3.6.1.4.1.4526.4.5.2.4.1
An entry in the wlanWdsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanWdsEntry

operationMode		1.3.6.1.4.1.4526.4.5.2.4.1.1
This attribute shall indicate the operation mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ap(0), ptp(2), ptpAP(3), pxp(4), pxpAP(5), repeater(6)

localMacAddress		1.3.6.1.4.1.4526.4.5.2.4.1.2
This attribute shall indicate the local MAC Address.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(6..17)

ptpRemoteMacAddress		1.3.6.1.4.1.4526.4.5.2.4.1.3
This attribute shall indicate the stationID.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..17)

pxpRemoteMacAddress1		1.3.6.1.4.1.4526.4.5.2.4.1.4
This attribute shall indicate the stationID.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..17)

pxpRemoteMacAddress2		1.3.6.1.4.1.4526.4.5.2.4.1.5
This attribute shall indicate the stationID.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..17)

pxpRemoteMacAddress3		1.3.6.1.4.1.4526.4.5.2.4.1.6
This attribute shall indicate the stationID.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..17)

pxpRemoteMacAddress4		1.3.6.1.4.1.4526.4.5.2.4.1.7
This attribute shall indicate the stationID.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..17)

repeaterParentMacAddress		1.3.6.1.4.1.4526.4.5.2.4.1.8
This attribute shall indicate the stationID.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..17)

repeaterChildMacAddress		1.3.6.1.4.1.4526.4.5.2.4.1.9
This attribute shall indicate the stationID.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(6..17)

wlanClientsTable		1.3.6.1.4.1.4526.4.5.2.5
wireless clients attributes in tablular form to allow for multiple instances on an agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WlanClientsEntry

wlanClientsEntry		1.3.6.1.4.1.4526.4.5.2.5.1
An entry in the wlanClientsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current	Access: not-accessible
OBJECT-TYPE
	WlanClientsEntry

clientIndex		1.3.6.1.4.1.4526.4.5.2.5.1.1
This attribute shall indicate sequence number (ID) of the associated station.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

clientMacAddress		1.3.6.1.4.1.4526.4.5.2.5.1.2
This attribute shall indicate MAC address of the associated stationID.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(6..17)

clientIP		1.3.6.1.4.1.4526.4.5.2.5.1.3
This attribute shall indicate the IP address of the associated stationID.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

clientSSID		1.3.6.1.4.1.4526.4.5.2.5.1.4
This attribute shall indicate the SSID that the wireless client associates to.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

clientStatus		1.3.6.1.4.1.4526.4.5.2.5.1.5
This attribute shall indicate the status of the associated stationID.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	blocked(0), authenticating(1), authenticated(2), associating(3), associated(4)

vlanSettings		1.3.6.1.4.1.4526.4.5.3
OBJECT IDENTIFIER

vlanEnable		1.3.6.1.4.1.4526.4.5.3.1
This attribute shall indicate whether vlan(802.1Q) is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

managementVlanId		1.3.6.1.4.1.4526.4.5.3.2
This attribute shall indicate the management VLAN ID.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4095

securityProfileVlanTable		1.3.6.1.4.1.4526.4.5.3.3
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SecurityProfileVlanEntry

securityProfileVlanEntry		1.3.6.1.4.1.4526.4.5.3.3.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SecurityProfileVlanEntry

profileNo		1.3.6.1.4.1.4526.4.5.3.3.1.1
the field indicates the security profile NO.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

profileVlan		1.3.6.1.4.1.4526.4.5.3.3.1.2
the field indicates the security profile's VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4095

sysStatistics		1.3.6.1.4.1.4526.4.5.4
OBJECT IDENTIFIER

ethernetStat		1.3.6.1.4.1.4526.4.5.4.1
OBJECT IDENTIFIER

ethInPackets		1.3.6.1.4.1.4526.4.5.4.1.1
the field indicates the sum of received packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ethOutPackets		1.3.6.1.4.1.4526.4.5.4.1.2
the field indicates the sum of transmitted packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ethInBytes		1.3.6.1.4.1.4526.4.5.4.1.3
the field indicates the sum of received bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ethOutBytes		1.3.6.1.4.1.4526.4.5.4.1.4
the field indicates the sum of transmitted bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wirelessStatTable		1.3.6.1.4.1.4526.4.5.4.2
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WirelessStatEntry

wirelessStatEntry		1.3.6.1.4.1.4526.4.5.4.2.1
Description.
Status: current	Access: not-accessible
OBJECT-TYPE
	WirelessStatEntry

wlanSecurityProfileNo		1.3.6.1.4.1.4526.4.5.4.2.1.1
the field indicates the security profile NO.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

wlanInPacketsUnicast		1.3.6.1.4.1.4526.4.5.4.2.1.2
the field indicates the sum of received unicast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanOutPacketsUnicast		1.3.6.1.4.1.4526.4.5.4.2.1.3
the field indicates the sum of transmitted unicast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanInPacketsBroadcast		1.3.6.1.4.1.4526.4.5.4.2.1.4
the field indicates the sum of received broadcast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanOutPacketsBroadcast		1.3.6.1.4.1.4526.4.5.4.2.1.5
the field indicates the sum of transmitted broadcast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanInPacketsMulticast		1.3.6.1.4.1.4526.4.5.4.2.1.6
the field indicates the sum of received multicast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanOutPacketsMulticast		1.3.6.1.4.1.4526.4.5.4.2.1.7
the field indicates the sum of transmitted multicast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanInPacketsTotal		1.3.6.1.4.1.4526.4.5.4.2.1.8
the field indicates the sum of received packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanOutPacketsTotal		1.3.6.1.4.1.4526.4.5.4.2.1.9
the field indicates the sum of transmitted packets.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanInBytesTotal		1.3.6.1.4.1.4526.4.5.4.2.1.10
the field indicates the sum of received bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wlanOutBytesTotal		1.3.6.1.4.1.4526.4.5.4.2.1.11
the field indicates the sum of transmitted bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

radiusSettings		1.3.6.1.4.1.4526.4.5.5
OBJECT IDENTIFIER

radiusAuthPrimaryServer		1.3.6.1.4.1.4526.4.5.5.1
OBJECT IDENTIFIER

radiusAuthPrimaryServerIP		1.3.6.1.4.1.4526.4.5.5.1.1
This field shall indicate the primary authentication RADIUS server IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

radiusAuthPrimaryServerPort		1.3.6.1.4.1.4526.4.5.5.1.2
This field shall indicate the primary authentication RADIUS server port number. Default: 1812.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

radiusAuthPrimaryServerSecret		1.3.6.1.4.1.4526.4.5.5.1.3
This field shall indicate the primary authentication RADIUS server shared secret string.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..127)

radiusAuthSecondaryServer		1.3.6.1.4.1.4526.4.5.5.2
OBJECT IDENTIFIER

radiusAuthSecondaryServerIP		1.3.6.1.4.1.4526.4.5.5.2.1
This field shall indicate the secondary authentication RADIUS server IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

radiusAuthSecondaryServerPort		1.3.6.1.4.1.4526.4.5.5.2.2
This field shall indicate the secondary authentication RADIUS server port number. Default: 1812.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

radiusAuthSecondaryServerSecret		1.3.6.1.4.1.4526.4.5.5.2.3
This field shall indicate the secondary authentication RADIUS server shared secret string.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..127)

authenticationSettings		1.3.6.1.4.1.4526.4.5.5.3
OBJECT IDENTIFIER

reauthTime		1.3.6.1.4.1.4526.4.5.5.3.1
This attribute shall indicate 802.1x reauth time.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1800..36000

wpaGroupKeyUpdateCondition		1.3.6.1.4.1.4526.4.5.5.3.2
This attribute shall indicate WPA group key update condition.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	never(0), seconds(1), disconnect(2), secondsAndDisconnect(3)

wpaGroupKeyUpdateIntervalSecond		1.3.6.1.4.1.4526.4.5.5.3.3
This fields indicates the wpa keyupdate sec interval.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

radiusAccountPrimaryServer		1.3.6.1.4.1.4526.4.5.5.4
OBJECT IDENTIFIER

radiusAccountPrimaryServerIP		1.3.6.1.4.1.4526.4.5.5.4.1
This field shall indicate the primary account RADIUS server IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

radiusAccountPrimaryServerPort		1.3.6.1.4.1.4526.4.5.5.4.2
This field shall indicate the primary account RADIUS server port number. Default: 1813.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

radiusAccountPrimaryServerSecret		1.3.6.1.4.1.4526.4.5.5.4.3
This field shall indicate the primary account RADIUS server shared secret string.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..127)

radiusAccountSecondaryServer		1.3.6.1.4.1.4526.4.5.5.5
OBJECT IDENTIFIER

radiusAccountSecondaryServerIP		1.3.6.1.4.1.4526.4.5.5.5.1
This field shall indicate the secondary account RADIUS server IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

radiusAccountSecondaryServerPort		1.3.6.1.4.1.4526.4.5.5.5.2
This field shall indicate the secondary account RADIUS server port number. Default: 1813.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

radiusAccountSecondaryServerSecret		1.3.6.1.4.1.4526.4.5.5.5.3
This field shall indicate the secondary account RADIUS server shared secret string.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..127)

hotspotSettings		1.3.6.1.4.1.4526.4.5.6
OBJECT IDENTIFIER

httpRedirectEnable		1.3.6.1.4.1.4526.4.5.6.1
This attribute shall indicate whether the HTTP redirect is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

httpRedirectUrl		1.3.6.1.4.1.4526.4.5.6.2
This attribute shall indicate http redirect URL.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

syslogSettings		1.3.6.1.4.1.4526.4.5.7
OBJECT IDENTIFIER

syslogEnable		1.3.6.1.4.1.4526.4.5.7.1
This attribute shall indicate whether the syslog is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

syslogServerIP		1.3.6.1.4.1.4526.4.5.7.2
This attributes shall indicates the IP address of the syslog server. ***The value can only be set to an IP address in dot format.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

syslogServerPort		1.3.6.1.4.1.4526.4.5.7.3
This attributes shall indicates the Port of the Syslog server.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

remoteMgmtSettings		1.3.6.1.4.1.4526.4.5.8
OBJECT IDENTIFIER

snmpEnable		1.3.6.1.4.1.4526.4.5.8.1
This attribute shall indicate whether the SNMP agent is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

snmpManageIP		1.3.6.1.4.1.4526.4.5.8.2
The field indicates the SNMP manage IP address. ***The value can only be set to an IP address in dot format.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

snmpTrapServerIP		1.3.6.1.4.1.4526.4.5.8.3
The field indicates the SNMP trap server IP address. ***The value can only be set to an IP address in dot format.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

snmpReadCommunity		1.3.6.1.4.1.4526.4.5.8.4
The field indicates the SNMP read only community name. ***The value can only be set to 1 to 32 readable string.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..31)

snmpWriteCommunity		1.3.6.1.4.1.4526.4.5.8.5
The field indicates the SNMP read write community name. ***The value can only be set to 1 to 32 readable string.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..31)

auxCommand		1.3.6.1.4.1.4526.4.5.9
OBJECT IDENTIFIER

resetAP		1.3.6.1.4.1.4526.4.5.9.1
This a command field for conntrol AP action. Write any value to reset the AP.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

resetToFactoryDefault		1.3.6.1.4.1.4526.4.5.9.2
This a command field for conntrol AP action. Write any value to reset the Access Point to the original factory default settings.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor