WAG302

File: WAG302.mib (63044 bytes)

Imported modules

RFC1213-MIB SNMPv2-CONF SNMPv2-SMI
SNMPv2-TC

Imported symbols

ifIndex OBJECT-GROUP enterprises
IpAddress Unsigned32 OBJECT-TYPE
MODULE-IDENTITY DisplayString RowStatus
TruthValue MacAddress

Defined Types

WlanSettingEntry  
SEQUENCE    
  operatemode INTEGER
  radioEnable TruthValue
  channel INTEGER
  datarate INTEGER
  wmmSupport TruthValue
  beaconinterval INTEGER
  rtsthreshold INTEGER
  fraglength INTEGER
  dtiminterval INTEGER
  preambletype INTEGER
  txpower INTEGER
  superG TruthValue
  accessControlMode INTEGER
  antenna INTEGER

VapWepAndGlobalSettingEntry  
SEQUENCE    
  wepKeyType INTEGER
  key1 DisplayString
  key2 DisplayString
  key3 DisplayString
  key4 DisplayString
  wepPassPhrase DisplayString

VapSettingEntry  
SEQUENCE    
  vapIndex INTEGER
  vapEnable TruthValue
  ssid DisplayString
  hidenetworkname TruthValue
  vlanID INTEGER
  securityProfileName DisplayString
  presharekey DisplayString
  authenticationtype INTEGER
  encryption INTEGER
  keyno INTEGER
  wlanseparator TruthValue

WirelessStatEntry  
SEQUENCE    
  wlanrecvunicastpacket Unsigned32
  wlantransunicastpacket Unsigned32
  wlanrecvbroadcastpacket Unsigned32
  wlantransbroadcastpacket Unsigned32
  wlanrecvmulticastpacket Unsigned32
  wlantransmulticastpacket Unsigned32
  wlanrecvpacket Unsigned32
  wlantranspacket Unsigned32
  wlanrecvbytes Unsigned32
  wlantransbytes Unsigned32

StationListEntry  
SEQUENCE    
  macaddress MacAddress
  clientIpaddr IpAddress
  clientWirelessMode INTEGER
  stationstatus INTEGER

WlanWdsEntry  
SEQUENCE    
  apmode INTEGER
  ptpremotemacaddress MacAddress
  pxpremotemacaddress1 MacAddress
  pxpremotemacaddress2 MacAddress
  pxpremotemacaddress3 MacAddress
  pxpremotemacaddress4 MacAddress
  repremotemacaddress1 MacAddress
  repremotemacaddress2 MacAddress
  repremotemacaddress3 MacAddress
  repremotemacaddress4 MacAddress
  localMacAddress MacAddress

DetectedApEntry  
SEQUENCE    
  apmac MacAddress
  apssid DisplayString
  apprivacy TruthValue
  apband DisplayString
  apchannel INTEGER
  aprate INTEGER
  apbeaconInterval INTEGER
  apnumBeacons INTEGER
  aplastBeacon INTEGER

KnownApEntry  
SEQUENCE    
  knownapmac MacAddress
  knownapssid DisplayString
  knownapprivacy TruthValue
  knownapband DisplayString
  knownapchannel INTEGER
  knownaprate INTEGER
  knownapbeaconInterval INTEGER
  knownapnumBeacons INTEGER
  knownaplastBeacon INTEGER
  knownapEntryStatus RowStatus

UnknownApEntry  
SEQUENCE    
  unknownapmac MacAddress
  unknownapssid DisplayString
  unknownapprivacy TruthValue
  unknownapband DisplayString
  unknownapchannel INTEGER
  unknownaprate INTEGER
  unknownapbeaconInterval INTEGER
  unknownapnumBeacons INTEGER
  unknownaplastBeacon INTEGER

WlanAccessControlLocalEntry  
SEQUENCE    
  aclMAC MacAddress
  aclMacStatus RowStatus

Defined Values

netgear 1.3.6.1.4.1.4526
OBJECT IDENTIFIER    

wireless 1.3.6.1.4.1.4526.4
OBJECT IDENTIFIER    

wag302 1.3.6.1.4.1.4526.4.7
The MIB module for 802.11a/b/g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wag302(7)
MODULE-IDENTITY    

lanSettings 1.3.6.1.4.1.4526.4.7.1
OBJECT IDENTIFIER    

apName 1.3.6.1.4.1.4526.4.7.1.1
The field indicates the name of AP. The name is also the NETBIOS name of the AP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

sysMacAddress 1.3.6.1.4.1.4526.4.7.1.2
This field indicates the system MAC Address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

sysVersion 1.3.6.1.4.1.4526.4.7.1.3
This field indicates the system firmware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysCountryRegion 1.3.6.1.4.1.4526.4.7.1.4
This attribute shall indicate the region of operation for which which the wireless interface is intended.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unitedArabEmirates(784), albania(8), armenia(51), argentina(32), austria(40), australia(36), azerbaijan(31), belgium(56), bulgaria(100), bahrain(48), brunei(96), bolivia(68), brazil(76), belarus(112), belize(84), canada(124), switzerland(756), chile(152), china(156), colombia(170), costaRica(188), cyprus(196), czechRepublic(203), germany(276), denmark(208), dominicanRepublic(214), algeria(12), ecuador(218), estonia(233), egypt(818), spain(724), finland(246), france(250), unitedKingdom(826), georgia(268), greece(300), guatemala(320), hongkong(344), honduras(340), croatia(191), hungary(348), indonesia(360), ireland(372), israel(376), india(356), iran(364), iceland(352), italy(380), jordan(400), japan(392), northKorea(408), koreaRepublic(410), kuwait(414), kazakhstan(398), lebanon(422), liechtenstein(438), lithuania(440), luxembourg(442), latvia(428), marocco(504), monaco(492), macedonia(807), macau(446), malta(470), mexico(484), malaysia(458), netherlands(528), norway(578), newZealand(554), oman(512), panama(591), peru(604), philippines(608), pakistan(586), poland(616), puertoRico(630), portugal(620), qatar(634), romania(642), russia(643), saudiArabia(682), sweden(752), singapore(702), slovakRepublic(703), slovenia(705), elSalvador(222), syria(760), thailand(764), tunisia(788), turkey(792), trinidadandTobago(780), taiwan(158), ukraine(804), unitedStates(840), uruguay(858), uzbekistan(860), venezuela(862), vietnam(704), yemen(887), southAfrica(710), zimbabwe(716)  

adminName 1.3.6.1.4.1.4526.4.7.1.5
The field indicates the administrator name.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..32)  

adminPasswd 1.3.6.1.4.1.4526.4.7.1.6
The field indicates the administrator password. The AP can be managed in such way as utility,telnet and so on.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..32)  

dhcpStatus 1.3.6.1.4.1.4526.4.7.1.7
This attribute shall indicate whether dhcp client status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(0), dhcpclient(1)  

ipAddr 1.3.6.1.4.1.4526.4.7.1.8
The field indicates the IP address of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same IP address, when worked in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netmaskAddr 1.3.6.1.4.1.4526.4.7.1.9
The field indicates the netmask of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same netmask address,when worked in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gatewayAddr 1.3.6.1.4.1.4526.4.7.1.10
The field indicates the gateway of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same gateway address,when worked in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

pridnsipAddr 1.3.6.1.4.1.4526.4.7.1.11
This attributes shall indicates the IP address of the primary DNS server. ***The value can only be set to an IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

snddnsipAddr 1.3.6.1.4.1.4526.4.7.1.12
This attributes shall indicates the IP address of the secondary DNS server. ***The value can only be set to an IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

spantree 1.3.6.1.4.1.4526.4.7.1.13
This attribute shall indicate spanning tree.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vlanEnable 1.3.6.1.4.1.4526.4.7.1.14
This attribute shall indicate whether enable VLAN(802.1Q).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

managementVlanID 1.3.6.1.4.1.4526.4.7.1.15
This attribute shall indicate the Management VLAN ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4094  

untaggedVlanID 1.3.6.1.4.1.4526.4.7.1.16
This attribute shall indicate the Untagged VLAN ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..4094  

wlanSettingTable 1.3.6.1.4.1.4526.4.7.2
wlanSettingsallow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanSettingEntry

wlanSettingEntry 1.3.6.1.4.1.4526.4.7.2.1
An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanSettingEntry  

operatemode 1.3.6.1.4.1.4526.4.7.2.1.1
This attribute shall indicate the desired wireless operating mode. The option are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11a - Only 802.11a wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(0), dot11a(1), dot11b(2), dot11g(3)  

radioEnable 1.3.6.1.4.1.4526.4.7.2.1.2
This attribute shall indicate whether the radio is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

channel 1.3.6.1.4.1.4526.4.7.2.1.3
This attribute shall indicate the channel number to be used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..165  

datarate 1.3.6.1.4.1.4526.4.7.2.1.4
This attribute shall indicate the transmite rate. When the operatemode is: auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, and 54:54Mb/s. dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s and 54:54Mb/s. dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, and 11:11 Mb/s. dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s and 54:54Mb/s.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER best(0), rate1Mbps(1000), rate2Mbps(2000), rate5dot5Mbps(5500), rate6Mbps(6000), rate9Mbps(9000), rate11Mbps(11000), rate12Mbps(12000), rate18Mbps(18000), rate24Mbps(24000), rate36Mbps(36000), rate48Mbps(48000), rate54Mbps(54000)  

wmmSupport 1.3.6.1.4.1.4526.4.7.2.1.5
This field indicates whether support WMM(Wireless Multimedia).
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

beaconinterval 1.3.6.1.4.1.4526.4.7.2.1.6
This attribute shall indicate the Beacon Interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..1000  

rtsthreshold 1.3.6.1.4.1.4526.4.7.2.1.7
This attribute shall indicate the RTS threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2346  

fraglength 1.3.6.1.4.1.4526.4.7.2.1.8
This attribute shall indicate the fragmentation threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 256..2346  

dtiminterval 1.3.6.1.4.1.4526.4.7.2.1.9
This attribute shall indicate the DTIM period.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

preambletype 1.3.6.1.4.1.4526.4.7.2.1.10
This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER long(0), auto(1)  

txpower 1.3.6.1.4.1.4526.4.7.2.1.11
This attribute shall indicate the tranmiste power.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(0), half(1), quarter(2), eighth(3), min(4)  

superG 1.3.6.1.4.1.4526.4.7.2.1.12
This attribute shall indicate whether super mode (super-A for 11a radio, Super-G for 11g radio) is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

accessControlMode 1.3.6.1.4.1.4526.4.7.2.1.13
The field indicates whether the access control list is enabled and the source of the database of the access control list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), local(2), server(3)  

antenna 1.3.6.1.4.1.4526.4.7.2.1.14
This attribute shall indicate the tranmistted power.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), primary(1), secondary(2)  

vapSetting 1.3.6.1.4.1.4526.4.7.3
OBJECT IDENTIFIER    

vapWepAndGlobalSettingTable 1.3.6.1.4.1.4526.4.7.3.1
VAP attributes setting table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VapWepAndGlobalSettingEntry

vapWepAndGlobalSettingEntry 1.3.6.1.4.1.4526.4.7.3.1.1
VAP attributes setting table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VapWepAndGlobalSettingEntry  

wepKeyType 1.3.6.1.4.1.4526.4.7.3.1.1.1
The field shall indicate the type of WEP key.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hex64(40), hex128(104), hex152(128)  

key1 1.3.6.1.4.1.4526.4.7.3.1.1.2
The field indicates the key value of the first default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

key2 1.3.6.1.4.1.4526.4.7.3.1.1.3
The field indicates the key value of the second default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

key3 1.3.6.1.4.1.4526.4.7.3.1.1.4
The field indicates the key value of the third default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

key4 1.3.6.1.4.1.4526.4.7.3.1.1.5
The field indicates the key value of the fourth default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

wepPassPhrase 1.3.6.1.4.1.4526.4.7.3.1.1.6
This attribute shall indicate WEP pass phrase, used to generate four WEP keys.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..39)  

vapSettingTable 1.3.6.1.4.1.4526.4.7.3.2
VAP attributes setting table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VapSettingEntry

vapSettingEntry 1.3.6.1.4.1.4526.4.7.3.2.1
VAP attributes setting table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VapSettingEntry  

vapIndex 1.3.6.1.4.1.4526.4.7.3.2.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

vapEnable 1.3.6.1.4.1.4526.4.7.3.2.1.2
This attribute shall indicate whether enable VAP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ssid 1.3.6.1.4.1.4526.4.7.3.2.1.3
This attribute shall indicate SSID.Its length can't be large than 33 .
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

hidenetworkname 1.3.6.1.4.1.4526.4.7.3.2.1.4
This attribute shall indicate whether broadcast wireless network Name (SSID).
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

vlanID 1.3.6.1.4.1.4526.4.7.3.2.1.5
This attribute shall indicate the VLAN ID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

securityProfileName 1.3.6.1.4.1.4526.4.7.3.2.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

presharekey 1.3.6.1.4.1.4526.4.7.3.2.1.7
This attribute shall indicate preshare key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

authenticationtype 1.3.6.1.4.1.4526.4.7.3.2.1.8
The field indicates how to authenticate the station.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER open(0), shared(1), legacy802dot1x(2), wpa(4), wpa2(8), wpaORwpa2(12), wpapsk(16), wpa2psk(32), wpapskORwpa2psk(48)  

encryption 1.3.6.1.4.1.4526.4.7.3.2.1.9
The field indicates how to encryption the station.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), wep(1), tkip(2), aes(4), tkipORaes(6)  

keyno 1.3.6.1.4.1.4526.4.7.3.2.1.10
The field indicates the number of default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

wlanseparator 1.3.6.1.4.1.4526.4.7.3.2.1.11
This attribute shall indicate whether enable No see.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

remoteSettings 1.3.6.1.4.1.4526.4.7.4
OBJECT IDENTIFIER    

sshd 1.3.6.1.4.1.4526.4.7.4.1
This attribute shall indicate whether the SSH is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

snmpenable 1.3.6.1.4.1.4526.4.7.4.2
This attribute shall indicate whether the SNMP agent is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

trapServerIP 1.3.6.1.4.1.4526.4.7.4.3
The field indicates the trap server IP address. ***The value can only be set to an IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

trapServerCommunity 1.3.6.1.4.1.4526.4.7.4.4
The field indicates the community name for traps.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

readOnlyCommunity 1.3.6.1.4.1.4526.4.7.4.5
The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

readWriteCommunity 1.3.6.1.4.1.4526.4.7.4.6
The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

statistic 1.3.6.1.4.1.4526.4.7.5
OBJECT IDENTIFIER    

wiredethernetstat 1.3.6.1.4.1.4526.4.7.5.1
OBJECT IDENTIFIER    

lanrecvpacket 1.3.6.1.4.1.4526.4.7.5.1.1
the field indicates the sum of received packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

lantranspacket 1.3.6.1.4.1.4526.4.7.5.1.2
the field indicates the sum of transmitted packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

lanrecvbytes 1.3.6.1.4.1.4526.4.7.5.1.3
the field indicates the sum of received bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

lantransbytes 1.3.6.1.4.1.4526.4.7.5.1.4
the field indicates the sum of transmitted bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wirelessStatTable 1.3.6.1.4.1.4526.4.7.5.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessStatEntry

wirelessStatEntry 1.3.6.1.4.1.4526.4.7.5.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  WirelessStatEntry  

wlanrecvunicastpacket 1.3.6.1.4.1.4526.4.7.5.2.1.1
the field indicates the sum of received unicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantransunicastpacket 1.3.6.1.4.1.4526.4.7.5.2.1.2
the field indicates the sum of transmitted unicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanrecvbroadcastpacket 1.3.6.1.4.1.4526.4.7.5.2.1.3
the field indicates the sum of received broadcast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantransbroadcastpacket 1.3.6.1.4.1.4526.4.7.5.2.1.4
the field indicates the sum of transmitted broadcast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanrecvmulticastpacket 1.3.6.1.4.1.4526.4.7.5.2.1.5
the field indicates the sum of received multicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantransmulticastpacket 1.3.6.1.4.1.4526.4.7.5.2.1.6
the field indicates the sum of transmitted multicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanrecvpacket 1.3.6.1.4.1.4526.4.7.5.2.1.7
the field indicates the sum of received packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantranspacket 1.3.6.1.4.1.4526.4.7.5.2.1.8
the field indicates the sum of transmitted packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanrecvbytes 1.3.6.1.4.1.4526.4.7.5.2.1.9
the field indicates the sum of received bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantransbytes 1.3.6.1.4.1.4526.4.7.5.2.1.10
the field indicates the sum of transmitted bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

stationListTable 1.3.6.1.4.1.4526.4.7.6
stationList Table show multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StationListEntry

stationListEntry 1.3.6.1.4.1.4526.4.7.6.1
An entry in the wlanClientsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  StationListEntry  

macaddress 1.3.6.1.4.1.4526.4.7.6.1.1
This attribute shall indicate MAC address of the associated stationID.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

clientIpaddr 1.3.6.1.4.1.4526.4.7.6.1.2
This attribute shall indicate Ip address of the associated stationID.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

clientWirelessMode 1.3.6.1.4.1.4526.4.7.6.1.3
This attribute shall indicate the wireless mode of the associated stationID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dot11a(1), dot11b(2), dot11g(3)  

stationstatus 1.3.6.1.4.1.4526.4.7.6.1.4
This attribute shall indicate the status of station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), authenticating(1), authenticated(2), associating(3), associated(4)  

wlanWdsTable 1.3.6.1.4.1.4526.4.7.7
WDS attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanWdsEntry

wlanWdsEntry 1.3.6.1.4.1.4526.4.7.7.1
An entry in the wlanWdsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanWdsEntry  

apmode 1.3.6.1.4.1.4526.4.7.7.1.1
This a command field for conntrol AP operation mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ap(0), ptp(2), ptp-ap(3), pxp(4), pxp-ap(5), repeater(6)  

ptpremotemacaddress 1.3.6.1.4.1.4526.4.7.7.1.2
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

pxpremotemacaddress1 1.3.6.1.4.1.4526.4.7.7.1.3
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

pxpremotemacaddress2 1.3.6.1.4.1.4526.4.7.7.1.4
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

pxpremotemacaddress3 1.3.6.1.4.1.4526.4.7.7.1.5
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

pxpremotemacaddress4 1.3.6.1.4.1.4526.4.7.7.1.6
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

repremotemacaddress1 1.3.6.1.4.1.4526.4.7.7.1.7
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

repremotemacaddress2 1.3.6.1.4.1.4526.4.7.7.1.8
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

repremotemacaddress3 1.3.6.1.4.1.4526.4.7.7.1.9
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

repremotemacaddress4 1.3.6.1.4.1.4526.4.7.7.1.10
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

localMacAddress 1.3.6.1.4.1.4526.4.7.7.1.11
This attribute shall indicate the local MAC Address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

info802dot1x 1.3.6.1.4.1.4526.4.7.8
OBJECT IDENTIFIER    

authinfo 1.3.6.1.4.1.4526.4.7.8.1
OBJECT IDENTIFIER    

priradipaddr 1.3.6.1.4.1.4526.4.7.8.1.1
Internet address of the Primary Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

priradport 1.3.6.1.4.1.4526.4.7.8.1.2
Port number used for authentication at the Primary Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

priradsharedsecret 1.3.6.1.4.1.4526.4.7.8.1.3
Secret shared between NAS and the Primary Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

sndradipaddr 1.3.6.1.4.1.4526.4.7.8.1.4
Internet address of the Second Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sndradport 1.3.6.1.4.1.4526.4.7.8.1.5
Port number used for authentication at the Second Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

sndradsharedsecret 1.3.6.1.4.1.4526.4.7.8.1.6
Secret shared between NAS and the Second Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

accntinfo 1.3.6.1.4.1.4526.4.7.8.2
OBJECT IDENTIFIER    

priacntipaddr 1.3.6.1.4.1.4526.4.7.8.2.1
IP address of the Primary radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

priacntport 1.3.6.1.4.1.4526.4.7.8.2.2
port number of the Primary radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

priacntsharedsecret 1.3.6.1.4.1.4526.4.7.8.2.3
password used by the ap to connect to the Primary radius account serve.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

sndacntipaddr 1.3.6.1.4.1.4526.4.7.8.2.4
IP address of the Second radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sndacntport 1.3.6.1.4.1.4526.4.7.8.2.5
port number of the Second radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

sndacntsharedsecret 1.3.6.1.4.1.4526.4.7.8.2.6
password used by the ap to connect to the Second radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

userCommand 1.3.6.1.4.1.4526.4.7.9
OBJECT IDENTIFIER    

resetAP 1.3.6.1.4.1.4526.4.7.9.1
This a command field for conntrol AP action. Write value 1 to reset the AP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

timeSettings 1.3.6.1.4.1.4526.4.7.10
OBJECT IDENTIFIER    

currenttime 1.3.6.1.4.1.4526.4.7.10.1
This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..20)  

timezone 1.3.6.1.4.1.4526.4.7.10.2
This field indicates the timezone of the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER afghanistan(0), albania(1), algeria(2), american-samoa(3), andorra(4), angola(5), anguilla(6), antigua-and-barbuda(7), argentina(8), armenia(9), aruba(10), australia-lordHoweIsland(11), australia-new-south-wales-capitol-territory-victoria(12), australia-northern-territory(13), australia-queensland(14), australia-south-australia-and-broken-hill(15), australia-tasmania(16), australia-western(17), austria(18), azerbaijan(19), bahamas(20), bahrain(21), bangladesh(22), barbados(23), belarus(24), belgium(25), belize(26), benin(27), bermuda(28), bhutan(29), bolivia(30), bonaire(31), bosnia-herzegovina(32), botswana(33), brazil-east-including-all-coast-and-brasilia(34), brazil-fernando-de-noronha(35), brazil-trinity-of-acre(36), brazil-west(37), british-virgin-islands(38), brunei(39), bulgaria(40), burkina-faso(41), burma(42), burundi(43), cambodia(44), cameroon(45), canada-atlantic(46), canada-central(47), canada-eastern(48), canada-mountain(49), canada-newfoundland(50), canada-pacific-and-yukon(51), canada-saskatchewan(52), cape-verde(53), cayman-islands(54), central-african-republic(55), chad(56), chile(57), chile-easter-island(58), china(59), christmas-islands(60), cocos-keeling-islands(61), colombia(62), congo(63), cook-islands(64), costa-rica(65), cote-d-ivoire(66), croatia(67), cuba(68), curacao(69), cyprus(70), czech-republic(71), denmark(72), djibouti(73), dominica(74), the-dominican-republic(75), ecuador(76), ecuador-galapagos-islands(77), egypt(78), el-salvador(79), equatorial-guinea(80), eritrea(81), estonia(82), ethiopia(83), faroe-islands(84), fiji(85), finland(86), france(87), french-guiana(88), french-polynesia(89), gabon(90), the-gambia(91), georgia(92), germany(93), ghana(94), gibraltar(95), greece(96), greenland-scorsbysund(97), greenland-thule(98), grenada(99), guadeloupe(100), guam(101), guatemala(102), guinea-bissau(103), guyana(104), haiti(105), hawaii(106), honduras(107), hong-kong(108), hungary(109), iceland(110), india(111), indonesia-central(112), indonesia-east(113), indonesia-west(114), iran(115), iraq(116), ireland(117), israel(118), italy(119), jamaica(120), japan(121), johnston-islands(122), jordan(123), juan-fernandez-islands(124), kazakhstan(125), kenya(126), kiribati(127), kuwait(128), kyrgyzstan(129), laos(130), latvia(131), lebanon(132), leeward-islands(133), lesotho(134), liberia(135), libya(136), liechtenstein(137), lithuania(138), luxembourg(139), macao(140), macedonia(141), madagascar(142), malawi(143), malaysia(144), maldives(145), mali(146), malta(147), mariana-Islands(148), martinique(149), mauritania(150), mauritius(151), mayotte(152), mexico(153), mexico-baj-n(154), mexico-baj-s(155), midway-islands(156), moldova(157), monaco(158), mongolia(159), montenegro(160), montserrat(161), morocco(162), mozambique(163), namibia(164), nauru(165), nepal(166), the-netherlands-antilles(167), the-netherlands(168), new-caledonia(169), new-hebrides(170), new-zealand9(171), new-zealand-chatham-island(172), nicaragua(173), niger(174), nigeria(175), niue-islands(176), norfolk-island(177), north-korea(178), norway(179), oman(180), pakistan(181), palau(182), panama(183), papua-new-guinea(184), paraguay(185), peru(186), philippines(187), pitcairn-island(188), poland(189), portugal-azores(190), portugal-madeira(191), puerto-rico(192), qatar(193), reunion(194), romania(195), russia-moscow(196), russian-fed-zone-1-kaliningrad(197), russian-fed-zone-10-magadan(198), russian-fed-zone-11-petropavlovsk-kamchatsky(199), russian-fed-zone-2-st-petersburg(200), russian-fed-zone-3-izhevsk(201), russian-fed-zone-4-ekaterinburg(202), russian-fed-zone-5-novosibirsk(203), russian-fed-zone-6-krasnojarsk(204), russian-fed-zone-7-irkutsk(205), russian-fed-zone-8-yakatsk(206), russian-fed-zone-9-vladivostok(207), rwanda(208), saint-pierre-and-miquelon(209), san-marino(210), sao-tome-and-principe(211), saudi-arabia(212), senegal(213), serbia(214), the-seychelles(215), sierra-leone(216), singapore(217), slovakia(218), slovenia(219), solomon-islands(220), somalia(221), south-africa(222), south-georgia(223), south-korea(224), spain(225), spain-canary-islands(226), sri-lanka(227), st-helena(228), st-kitts-nevis(229), st-lucia(230), st-vincent-and-the-grenadines(231), sudan(232), suriname(233), swaziland(234), sweden(235), switzerland(236), syria(237), tahiti(238), taiwan(239), tajikistan(240), tanzania(241), thailand(242), togo(243), tonga(244), trinidad-and-tobago(245), tunisia(246), turkey(247), turkmenistan(248), turks-and-caicos-islands(249), tuvalu(250), uganda(251), ukraine(252), ukraine-simferopol(253), united-arab-emirates(254), united-kingdom(255), uruguay(256), us-virgin-islands(257), usa-alaska(258), usa-aleutian-islands(259), usa-arizona(260), usa-central(261), usa-eastern(262), usa-indiana(263), usa-mountain(264), usa-pacific(265), uzbekistan(266), vanuatu(267), vatican-city(268), venezuela(269), vietnam(270), wake-islands(271), wallis-and-futana-islands(272), western-samoa(273), windward-islands(274), yemen(275), zaire-kasai(276), zaire-kinshasa(277), zambia(278), zimbabwe(279)  

daylightsaving 1.3.6.1.4.1.4526.4.7.10.3
This attribute shall indicate the Daylight Saving time.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dhcpsSettings 1.3.6.1.4.1.4526.4.7.11
OBJECT IDENTIFIER    

dhcpserver 1.3.6.1.4.1.4526.4.7.11.1
This attribute shall indicate whether DHCP server is enable or disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dhcpsipstart 1.3.6.1.4.1.4526.4.7.11.2
This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpsipend 1.3.6.1.4.1.4526.4.7.11.3
This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpnetmask 1.3.6.1.4.1.4526.4.7.11.4
This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpsgateway 1.3.6.1.4.1.4526.4.7.11.5
This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpspridns 1.3.6.1.4.1.4526.4.7.11.6
This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpspsnddns 1.3.6.1.4.1.4526.4.7.11.7
This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpspriwins 1.3.6.1.4.1.4526.4.7.11.8
This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpspsndwins 1.3.6.1.4.1.4526.4.7.11.9
This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpsleasetime 1.3.6.1.4.1.4526.4.7.11.10
This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 15..44640  

logSettings 1.3.6.1.4.1.4526.4.7.12
OBJECT IDENTIFIER    

syslog 1.3.6.1.4.1.4526.4.7.12.1
This attribute shall indicate whether syslog is enable or disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

syslogsrvip 1.3.6.1.4.1.4526.4.7.12.2
This attributes shall indicates the IP address of the syslog server. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

syslogsrvport 1.3.6.1.4.1.4526.4.7.12.3
This attributes shall indicates the Port of the Syslog server. *** The value can only be set to a port in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

httpRedirectSettings 1.3.6.1.4.1.4526.4.7.13
OBJECT IDENTIFIER    

httpRedirectEnable 1.3.6.1.4.1.4526.4.7.13.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

httpRedirectURL 1.3.6.1.4.1.4526.4.7.13.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..119)  

detectedApTable 1.3.6.1.4.1.4526.4.7.14
detectedAp Table shows list of detected neighbouring APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DetectedApEntry

detectedApEntry 1.3.6.1.4.1.4526.4.7.14.1
An entry in the detectedApTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DetectedApEntry  

apmac 1.3.6.1.4.1.4526.4.7.14.1.1
This attribute shall indicate MAC address of the detected AP.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

apssid 1.3.6.1.4.1.4526.4.7.14.1.2
This attribute shall indicate ssid of the detected AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

apprivacy 1.3.6.1.4.1.4526.4.7.14.1.3
This attribute shall indicate whether privacy is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

apband 1.3.6.1.4.1.4526.4.7.14.1.4
This attribute shall indicate the operating band of detected AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

apchannel 1.3.6.1.4.1.4526.4.7.14.1.5
This attribute shall indicate the channel number used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

aprate 1.3.6.1.4.1.4526.4.7.14.1.6
This attribute shall indicate the rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

apbeaconInterval 1.3.6.1.4.1.4526.4.7.14.1.7
This attribute shall indicate the beacon interval in kus (1.024 ms).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

apnumBeacons 1.3.6.1.4.1.4526.4.7.14.1.8
This attribute shall indicate the number of beacons received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

aplastBeacon 1.3.6.1.4.1.4526.4.7.14.1.9
This attribute shall indicate the time of the last beacon.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

knownApTable 1.3.6.1.4.1.4526.4.7.15
knownAp Table shows list of known APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KnownApEntry

knownApEntry 1.3.6.1.4.1.4526.4.7.15.1
An entry in the knownApTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  KnownApEntry  

knownapmac 1.3.6.1.4.1.4526.4.7.15.1.1
This attribute shall indicate MAC address of the known AP.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

knownapssid 1.3.6.1.4.1.4526.4.7.15.1.2
This attribute shall indicate ssid of the known AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

knownapprivacy 1.3.6.1.4.1.4526.4.7.15.1.3
This attribute shall indicate whether privacy is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

knownapband 1.3.6.1.4.1.4526.4.7.15.1.4
This attribute shall indicate the operating band of known AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

knownapchannel 1.3.6.1.4.1.4526.4.7.15.1.5
This attribute shall indicate the channel number used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

knownaprate 1.3.6.1.4.1.4526.4.7.15.1.6
This attribute shall indicate the rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

knownapbeaconInterval 1.3.6.1.4.1.4526.4.7.15.1.7
This attribute shall indicate the beacon interval in kus (1.024 ms).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

knownapnumBeacons 1.3.6.1.4.1.4526.4.7.15.1.8
This attribute shall indicate the number of beacons received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

knownaplastBeacon 1.3.6.1.4.1.4526.4.7.15.1.9
This attribute shall indicate the time of the last beacon.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

knownapEntryStatus 1.3.6.1.4.1.4526.4.7.15.1.10
The Known AP Entry status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER  

unknownApTable 1.3.6.1.4.1.4526.4.7.16
unknownAp Table shows list of unknown APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UnknownApEntry

unknownApEntry 1.3.6.1.4.1.4526.4.7.16.1
An entry in the unknownApTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  UnknownApEntry  

unknownapmac 1.3.6.1.4.1.4526.4.7.16.1.1
This attribute shall indicate MAC address of the unknown AP.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

unknownapssid 1.3.6.1.4.1.4526.4.7.16.1.2
This attribute shall indicate ssid of the unknown AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

unknownapprivacy 1.3.6.1.4.1.4526.4.7.16.1.3
This attribute shall indicate whether privacy is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

unknownapband 1.3.6.1.4.1.4526.4.7.16.1.4
This attribute shall indicate the operating band of unknown AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

unknownapchannel 1.3.6.1.4.1.4526.4.7.16.1.5
This attribute shall indicate the channel number used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

unknownaprate 1.3.6.1.4.1.4526.4.7.16.1.6
This attribute shall indicate the rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

unknownapbeaconInterval 1.3.6.1.4.1.4526.4.7.16.1.7
This attribute shall indicate the beacon interval in kus (1.024 ms).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

unknownapnumBeacons 1.3.6.1.4.1.4526.4.7.16.1.8
This attribute shall indicate the number of beacons received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

unknownaplastBeacon 1.3.6.1.4.1.4526.4.7.16.1.9
This attribute shall indicate the time of the last beacon.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

wlanAccessControlLocalTable 1.3.6.1.4.1.4526.4.7.17
ACL attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanAccessControlLocalEntry

wlanAccessControlLocalEntry 1.3.6.1.4.1.4526.4.7.17.1
An entry in the wlanAccessControlListTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanAccessControlLocalEntry  

aclMAC 1.3.6.1.4.1.4526.4.7.17.1.1
This field should indicate an MAC address entry in the access control local database. When write this field aclMAC=000000000000, shall remove current MAC address from local database. Otherwise, shall update the MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

aclMacStatus 1.3.6.1.4.1.4526.4.7.17.1.2
The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER