WG102

File: WG102.mib (64590 bytes)

Imported modules

RFC1155-SMI SNMPv2-CONF SNMPv2-SMI
SNMPv2-TC

Imported symbols

TimeTicks OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE Unsigned32 enterprises
IpAddress DisplayString TruthValue

Defined Types

WlanSettingEntry  
SEQUENCE    
  radioIndex INTEGER
  radioEnable TruthValue
  wirelessMode INTEGER
  channel INTEGER
  txRate INTEGER
  txPower INTEGER
  beaconInterval INTEGER
  dtimInterval INTEGER
  rtsThreshold INTEGER
  fragmentationThreshold INTEGER
  dot11bPreamble INTEGER
  superMode TruthValue
  wmm TruthValue
  wmmNoAck TruthValue
  acEnabled TruthValue
  acEnhancedRFSecurity INTEGER
  acRogueDevDetection TruthValue
  accessControlMode INTEGER

WlanSecurityEntry  
SEQUENCE    
  securityProfileNo INTEGER
  securityProfileEnabled TruthValue
  securityProfileName DisplayString
  ssid DisplayString
  ssidBroadcastEnable TruthValue
  authentication INTEGER
  encryption INTEGER
  wepKey1 DisplayString
  wepKey2 DisplayString
  wepKey3 DisplayString
  wepKey4 DisplayString
  wepKeyDefault INTEGER
  wpaPSK DisplayString
  wlanSeparatorEnable TruthValue
  wlanMaxUser INTEGER

WlanAccessControlLocalEntry  
SEQUENCE    
  aclIndex INTEGER
  aclMAC DisplayString

WlanWdsEntry  
SEQUENCE    
  operationMode INTEGER
  localMacAddress DisplayString
  ptpRemoteMacAddress DisplayString
  pxpRemoteMacAddress1 DisplayString
  pxpRemoteMacAddress2 DisplayString
  pxpRemoteMacAddress3 DisplayString
  pxpRemoteMacAddress4 DisplayString
  repeaterParentMacAddress DisplayString
  repeaterChildMacAddress DisplayString

WlanClientsEntry  
SEQUENCE    
  clientIndex INTEGER
  clientMacAddress DisplayString
  clientIP IpAddress
  clientSSID DisplayString
  clientStatus INTEGER

WlanUnknownApEntry  
SEQUENCE    
  unknowApIndex INTEGER
  unknowApAuthorize TruthValue
  unknowApSSID DisplayString
  unknowApMacAddress DisplayString
  unknowApChannel DisplayString
  unknowApAutoCellEnabled DisplayString

WlanAuthorizedApEntry  
SEQUENCE    
  authorizedApIndex INTEGER
  authorizedApDelete TruthValue
  authorizedApSSID DisplayString
  authorizedApMacAddress DisplayString
  authorizedApChannel DisplayString
  authorizedApAutoCellEnabled DisplayString

WlanUnknownStationEntry  
SEQUENCE    
  unknowStationIndex INTEGER
  unknowStationAuthorize TruthValue
  unknowStationMacAddress DisplayString
  unknowStationChannel DisplayString
  unknowStationAutoCellEnabled DisplayString

WlanAuthorizedStationEntry  
SEQUENCE    
  authorizedStationIndex INTEGER
  authorizedStationDelete TruthValue
  authorizedStationMacAddress DisplayString
  authorizedStationChannel DisplayString
  authorizedStationAutoCellEnabled DisplayString

SecurityProfileVlanEntry  
SEQUENCE    
  profileNo INTEGER
  profileVlan INTEGER

WirelessStatEntry  
SEQUENCE    
  wlanSecurityProfileNo INTEGER
  wlanInPacketsUnicast Unsigned32
  wlanOutPacketsUnicast Unsigned32
  wlanInPacketsBroadcast Unsigned32
  wlanOutPacketsBroadcast Unsigned32
  wlanInPacketsMulticast Unsigned32
  wlanOutPacketsMulticast Unsigned32
  wlanInPacketsTotal Unsigned32
  wlanOutPacketsTotal Unsigned32
  wlanInBytesTotal Unsigned32
  wlanOutBytesTotal Unsigned32

WirelessLinkStatEntry  
SEQUENCE    
  wirelessLinkStatIndex INTEGER
  wirelessLinkStatDate DisplayString
  wirelessLinkStatTime INTEGER
  wirelessLinkStatRequest Unsigned32
  wirelessLinkStatResponse Unsigned32
  wirelessLinkStatGrant Unsigned32
  wirelessLinkStatDisconnect Unsigned32
  wirelessLinkStatDisconnectAll Unsigned32
  wirelessLinkStatFlag TruthValue

Defined Values

wg102 1.3.6.1.4.1.4526.4.3
The MIB module for 802.11b/g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wg102(3)
MODULE-IDENTITY    

netgear 1.3.6.1.4.1.4526
OBJECT IDENTIFIER    

wireless 1.3.6.1.4.1.4526.4
OBJECT IDENTIFIER    

sysSettings 1.3.6.1.4.1.4526.4.3.1
OBJECT IDENTIFIER    

sysMacAddress 1.3.6.1.4.1.4526.4.3.1.1
This field indicates the system MAC Address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(6..17)  

sysVersion 1.3.6.1.4.1.4526.4.3.1.2
This field indicates the system firmware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysAPName 1.3.6.1.4.1.4526.4.3.1.3
This field indicates the name of AP. The name is also the NETBIOS name of the AP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

sysAdminName 1.3.6.1.4.1.4526.4.3.1.4
This field indicates the administrator name, which is used to sign in web GUI, SSH, CLI, and FTP server of the AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

sysAdminPasswd 1.3.6.1.4.1.4526.4.3.1.5
This field indicates the administrator password, which is used to sign in web GUI, SSH, CLI, and FTP server of the AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

sysCountryRegion 1.3.6.1.4.1.4526.4.3.1.7
This field indicates the country/region of the AP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER asia(410), australia(36), canada(124), denmark(208), europe(40), finland(246), france(250), germany(276), ireland(372), italy(380), japan(392), mexico(484), netherlands(528), newZealand(554), norway(578), puertoRico(630), southAmerica(340), spain(724), sweden(752), switzerland(756), unitedKingdom(826), unitedStates(840)  

timeSettings 1.3.6.1.4.1.4526.4.3.1.8
OBJECT IDENTIFIER    

timeCurrentTime 1.3.6.1.4.1.4526.4.3.1.8.1
This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..20)  

timeTimeZone 1.3.6.1.4.1.4526.4.3.1.8.2
This field indicates the timezone of the system. 0 UK,GreenWich,Casablanca,Monrovia (GMT), -12 Eniwetok,Kwajalein (GMT-12:00), -11 Midway I., Samoa (GMT-11:00), -10 Hawaii (GMT-10:00), -9.5 Marqesas Is. (GMT-09:30), -9 Alaska (GMT-09:00), -8.5 Pitciarn Is. (GMT-08:30), -8 Pacific Time ..US and Canada (GMT-08:00), -7 MountainTime(USA),Arizona (GMT-07:00), -6 CentralTime(USA),Mexico City,Tequciqalpa (GMT-06:00), -5 EasternTime(USA),Bogota,Lima,Quito,Indiana East (GMT-05:00), -4 Caracas,La Paz (GMT-04:00), -3.5 Newfoundland (GMT-03:30), -3 Brasilia,Beunos Aires,Georgetown (GMT-03:00), -2 Mid-Atlantic (GMT-02:00), -1 Azores,Cape Verde Is. (GMT-01:00), 1 Europe (GMT+01:00), 2 Egypt,Finland,Romania,Turkey,Greece,Israel,Jordan(GMT+02:00), 3 Iraq, Syria,Russia (GMT+03:00), 3.5 Iran (GMT+03:30), 4 Armenia, Azerbaijan (GMT+04:00), 4.5 Afghanistan (GMT+04:30), 5 Russia,Pakistan (GMT+05:00), 5.5 India (GMT+05:30), 6 Bangladesh,Russia (GMT+06:00), 6.5 Burma (GMT+06:30), 7 Russia,Thailand, Combodia, Laos (GMT+07:00), 8 Russia,China,Mongolia,Indonesia,Philippines,Taiwan,WA (GMT+08:00), 9 Russia,Japan,Korea (GMT+09:00), 9.5 Adelaide,Darwin (GMT+09:30), 10 Eastern Standard(Aust),Russia,Gaum,Papua New Guinea (GMT+10:00)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gmt00UkGreenWichCasablancaMonrovia(0), gmtwest12EniwetokKwajalein(1), gmtwest11MidwayIslandSamoa(2), gmtwest10Hawaii(3), gmtwest9dot5MarqesasIs(4), gmtwest09Alaska(5), gmtwest8dot5PitciarnIs(6), gmtwest08PacificTimeUsCanada(7), gmtwest07MountainTimeUsArizona(8), gmtwest06CentralTimeUsMexicoCityTequciqalpa(9), gmtwest05EasternTimeUsBogotaLimaQuitoIndianaEast(10), gmtwest04CaracasLaPaz(11), gmtwest3dot5Newfoundland(12), gmtwest03BrasiliaBeunosAiresGeorgetown(13), gmtwest02MidAtlantic(14), gmtwest01AzoresCapeVerdeIs(15), gmteast01Europe(16), gmteast02EgyptFinlandRomaniaTurkeyGreeceIsraelJordan(17), gmteast03IraqSyriaRussia(18), gmteast3dot5Iran(19), gmteast04ArmeniaAzerbaijan(20), gmteast4dot5Afghanistan(21), gmteast05RussiaPakistan(22), gmteast5dot5India(23), gmteast06BangladeshRussia(24), gmteast6dot5Burma(25), gmteast07RussiaThailandCombodiaLaos(26), gmteast08RussiaChinaMongoliaIndonesiaPhilippinesTaiwanWA(27), gmteast09RussiaJapanKorea(28), gmteast9dot5AdelaideDarwin(29), gmteast10EasternStandardAustRussiaGaumPapuaNewGuinea(30)  

timeDaylightSaving 1.3.6.1.4.1.4526.4.3.1.8.3
This field indicates whether the Daylight Saving time is used.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

timeNtpServer 1.3.6.1.4.1.4526.4.3.1.8.4
This field indicates the hostname or IP address for the NTP server. If you want to use a custom NTP server, you can specify it for the Access Point. Otherwise, you can just leave it blank.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

ipSettings 1.3.6.1.4.1.4526.4.3.1.9
OBJECT IDENTIFIER    

ipDhcpClientEnable 1.3.6.1.4.1.4526.4.3.1.9.1
This field indicates whether DHCP client is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ipIPAddress 1.3.6.1.4.1.4526.4.3.1.9.2
This field indicates the IP address of the AP.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNetmask 1.3.6.1.4.1.4526.4.3.1.9.3
This field indicates the netmask addressof the AP.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipGateway 1.3.6.1.4.1.4526.4.3.1.9.4
This field indicates the default gateway address of the AP.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipDnsServer 1.3.6.1.4.1.4526.4.3.1.9.5
This field indicates the IP address of the DNS server. *** Note: The value can only be set to an IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wlanSettings 1.3.6.1.4.1.4526.4.3.2
OBJECT IDENTIFIER    

wlanSettingTable 1.3.6.1.4.1.4526.4.3.2.1
wlanSettingsallow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanSettingEntry

wlanSettingEntry 1.3.6.1.4.1.4526.4.3.2.1.1
An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanSettingEntry  

radioIndex 1.3.6.1.4.1.4526.4.3.2.1.1.1
This attribute shall indicate the radio's band.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dot11a(0), dot11bg(1)  

radioEnable 1.3.6.1.4.1.4526.4.3.2.1.1.2
This attribute shall indicate whether the radio is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wirelessMode 1.3.6.1.4.1.4526.4.3.2.1.1.5
This attribute shall indicate the desired wireless operating mode. Options are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11a - Only 802.11a wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), dot11a(1), dot11b(2), dot11g(3)  

channel 1.3.6.1.4.1.4526.4.3.2.1.1.6
This attribute shall indicate the channel number to be used. And the zero indicates that auto channel selection is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..165  

txRate 1.3.6.1.4.1.4526.4.3.2.1.1.7
This attribute shall indicate the transmite rate. When the operatemode is: auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, and 54:54Mb/s. dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, 54:54Mb/s. dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, and 11:11 Mb/s. dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, 54:54Mb/s.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER best(0), rate1Mbps(1), rate2Mbps(2), rate5dot5Mbps(3), rate6Mbps(4), rate9Mbps(5), rate11Mbps(6), rate12Mbps(7), rate18Mbps(8), rate24Mbps(9), rate36Mbps(10), rate48Mbps(11), rate54Mbps(12)  

txPower 1.3.6.1.4.1.4526.4.3.2.1.1.8
This attribute shall indicate the transmitting power.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(0), half(1), quarter(2), eighth(3), min(4)  

beaconInterval 1.3.6.1.4.1.4526.4.3.2.1.1.9
This attribute shall indicate the beacon interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..1000  

dtimInterval 1.3.6.1.4.1.4526.4.3.2.1.1.10
This attribute shall indicate the DTIM period.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

rtsThreshold 1.3.6.1.4.1.4526.4.3.2.1.1.11
This attribute shall indicate the RTS threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2346  

fragmentationThreshold 1.3.6.1.4.1.4526.4.3.2.1.1.12
This attribute shall indicate the fragmentation threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 256..2346  

dot11bPreamble 1.3.6.1.4.1.4526.4.3.2.1.1.13
This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER long(0), auto(1)  

superMode 1.3.6.1.4.1.4526.4.3.2.1.1.14
This attribute shall indicate whether super mode (super-A for 11a radio, Super-G for 11g radio) is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wmm 1.3.6.1.4.1.4526.4.3.2.1.1.15
This attribute shall indicate whether wmm is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wmmNoAck 1.3.6.1.4.1.4526.4.3.2.1.1.16
This attribute shall indicate whether wmm with no ack is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acEnabled 1.3.6.1.4.1.4526.4.3.2.1.1.17
This field indicates whether enable AutoCell.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acEnhancedRFSecurity 1.3.6.1.4.1.4526.4.3.2.1.1.18
This field indicates whether enable Enhanced RF Security.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(3)  

acRogueDevDetection 1.3.6.1.4.1.4526.4.3.2.1.1.19
This field indicates whether enable Rogue Device Detection.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

accessControlMode 1.3.6.1.4.1.4526.4.3.2.1.1.20
The field indicates whether the access control list is enabled and the source of the database of the access control list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), local(2), server(3)  

wlanSecurityTable 1.3.6.1.4.1.4526.4.3.2.2
Security attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanSecurityEntry

wlanSecurityEntry 1.3.6.1.4.1.4526.4.3.2.2.1
An entry in the securityTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanSecurityEntry  

securityProfileNo 1.3.6.1.4.1.4526.4.3.2.2.1.1
The field indicates the security profile NO.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

securityProfileEnabled 1.3.6.1.4.1.4526.4.3.2.2.1.2
This attribute shall indicate whether the security profile is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

securityProfileName 1.3.6.1.4.1.4526.4.3.2.2.1.3
This attribute shall indicate SSID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

ssid 1.3.6.1.4.1.4526.4.3.2.2.1.4
This attribute shall indicate SSID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

ssidBroadcastEnable 1.3.6.1.4.1.4526.4.3.2.2.1.5
This attribute shall indicate whether wireless network Name (SSID) will be broadcasted.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

authentication 1.3.6.1.4.1.4526.4.3.2.2.1.6
The field indicates how to authenticate the station.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER openSystem(0), sharedKey(1), legacy8021x(2), wpaPSK(3), wpaRadius(4), wpa2-psk(5), wpawpa2-psk(6), wpa2-802dot1x(7), wpawpa2-802dot1x(8)  

encryption 1.3.6.1.4.1.4526.4.3.2.2.1.7
The field indicates how to encryption the data and the type of WEP key.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), wep64(1), wep128(2), wep152(3), tkip(4), aes-tkip(5), aes(6)  

wepKey1 1.3.6.1.4.1.4526.4.3.2.2.1.8
The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

wepKey2 1.3.6.1.4.1.4526.4.3.2.2.1.9
The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

wepKey3 1.3.6.1.4.1.4526.4.3.2.2.1.10
The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

wepKey4 1.3.6.1.4.1.4526.4.3.2.2.1.11
The field shall indicate the WEP key. wep key type length valid chars ============ ====== =========== none 0 wep64 10 0-9,a-f,A-F wep128 26 0-9,a-f,A-F wep152 32 0-9,a-f,A-F
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

wepKeyDefault 1.3.6.1.4.1.4526.4.3.2.2.1.12
The field shall indicate the WEP key number to encrypt TX data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

wpaPSK 1.3.6.1.4.1.4526.4.3.2.2.1.13
This attribute shall indicate WPA Pre-Shared Key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(8..63)  

wlanSeparatorEnable 1.3.6.1.4.1.4526.4.3.2.2.1.14
This attribute shall indicate whether block the communications between two wireless clients.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wlanMaxUser 1.3.6.1.4.1.4526.4.3.2.2.1.15
This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..64  

wlanAccessControlLocalTable 1.3.6.1.4.1.4526.4.3.2.3
ACL attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanAccessControlLocalEntry

wlanAccessControlLocalEntry 1.3.6.1.4.1.4526.4.3.2.3.1
An entry in the wlanAccessControlListTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanAccessControlLocalEntry  

aclIndex 1.3.6.1.4.1.4526.4.3.2.3.1.1
This field should indicate an index to the access control local database entry. When write this field aclIndex=9999, shall append new MAC address into the local database
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..256 | 9999  

aclMAC 1.3.6.1.4.1.4526.4.3.2.3.1.2
This field should indicate an MAC address entry in the access control local database. When write this field aclMAC=000000000000, shall remove current MAC address from local database. Otherwise, shall update the MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6..17)  

wlanWdsTable 1.3.6.1.4.1.4526.4.3.2.4
WDS attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanWdsEntry

wlanWdsEntry 1.3.6.1.4.1.4526.4.3.2.4.1
An entry in the wlanWdsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanWdsEntry  

operationMode 1.3.6.1.4.1.4526.4.3.2.4.1.1
This attribute shall indicate the operation mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ap(0), ptp(2), ptpAP(3), pxp(4), pxpAP(5), repeater(6)  

localMacAddress 1.3.6.1.4.1.4526.4.3.2.4.1.2
This attribute shall indicate the local MAC Address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(6..17)  

ptpRemoteMacAddress 1.3.6.1.4.1.4526.4.3.2.4.1.3
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6..17)  

pxpRemoteMacAddress1 1.3.6.1.4.1.4526.4.3.2.4.1.4
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6..17)  

pxpRemoteMacAddress2 1.3.6.1.4.1.4526.4.3.2.4.1.5
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6..17)  

pxpRemoteMacAddress3 1.3.6.1.4.1.4526.4.3.2.4.1.6
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6..17)  

pxpRemoteMacAddress4 1.3.6.1.4.1.4526.4.3.2.4.1.7
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6..17)  

repeaterParentMacAddress 1.3.6.1.4.1.4526.4.3.2.4.1.8
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6..17)  

repeaterChildMacAddress 1.3.6.1.4.1.4526.4.3.2.4.1.9
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(6..17)  

wlanClientsTable 1.3.6.1.4.1.4526.4.3.2.5
wireless clients attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanClientsEntry

wlanClientsEntry 1.3.6.1.4.1.4526.4.3.2.5.1
An entry in the wlanClientsTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanClientsEntry  

clientIndex 1.3.6.1.4.1.4526.4.3.2.5.1.1
This attribute shall indicate sequence number (ID) of the associated station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

clientMacAddress 1.3.6.1.4.1.4526.4.3.2.5.1.2
This attribute shall indicate MAC address of the associated stationID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(6..17)  

clientIP 1.3.6.1.4.1.4526.4.3.2.5.1.3
This attribute shall indicate the IP address of the associated stationID.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

clientSSID 1.3.6.1.4.1.4526.4.3.2.5.1.4
This attribute shall indicate the SSID that the wireless client associates to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

clientStatus 1.3.6.1.4.1.4526.4.3.2.5.1.5
This attribute shall indicate the status of the associated stationID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER blocked(0), authenticating(1), authenticated(2), associating(3), associated(4)  

wlanUnknownApTable 1.3.6.1.4.1.4526.4.3.2.6
wireless Unknown AP attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanUnknownApEntry

wlanUnknownApEntry 1.3.6.1.4.1.4526.4.3.2.6.1
An entry in the wlanUnknownApTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanUnknownApEntry  

unknowApIndex 1.3.6.1.4.1.4526.4.3.2.6.1.1
This attribute shall indicate sequence number (ID) of the detected unknow AP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

unknowApAuthorize 1.3.6.1.4.1.4526.4.3.2.6.1.2
This attribute is used to authorize the AP to the authorized AP List.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

unknowApSSID 1.3.6.1.4.1.4526.4.3.2.6.1.3
This attribute shall indicate the SSID of the AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

unknowApMacAddress 1.3.6.1.4.1.4526.4.3.2.6.1.4
This attribute shall indicate MAC address of the AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(6..17)  

unknowApChannel 1.3.6.1.4.1.4526.4.3.2.6.1.5
This attribute shall indicate the channel number of the AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..5)  

unknowApAutoCellEnabled 1.3.6.1.4.1.4526.4.3.2.6.1.6
This attribute shall indicate whether the AutoCell is enabled on the AP or not.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..5)  

wlanAuthorizedApTable 1.3.6.1.4.1.4526.4.3.2.7
wireless Authorized AP attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanAuthorizedApEntry

wlanAuthorizedApEntry 1.3.6.1.4.1.4526.4.3.2.7.1
An entry in the wlanAuthorizedApTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanAuthorizedApEntry  

authorizedApIndex 1.3.6.1.4.1.4526.4.3.2.7.1.1
This attribute shall indicate sequence number (ID) of the detected authorized AP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

authorizedApDelete 1.3.6.1.4.1.4526.4.3.2.7.1.2
This attribute is used to delete the AP from authorized AP List.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

authorizedApSSID 1.3.6.1.4.1.4526.4.3.2.7.1.3
This attribute shall indicate the SSID of the AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

authorizedApMacAddress 1.3.6.1.4.1.4526.4.3.2.7.1.4
This attribute shall indicate MAC address of the AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(6..17)  

authorizedApChannel 1.3.6.1.4.1.4526.4.3.2.7.1.5
This attribute shall indicate the channel number of the AP.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..5)  

authorizedApAutoCellEnabled 1.3.6.1.4.1.4526.4.3.2.7.1.6
This attribute shall indicate whether the AutoCell is enabled on the AP or not.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..5)  

wlanUnknownStationTable 1.3.6.1.4.1.4526.4.3.2.8
wireless Unknown Station attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanUnknownStationEntry

wlanUnknownStationEntry 1.3.6.1.4.1.4526.4.3.2.8.1
An entry in the wlanUnknownStationTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanUnknownStationEntry  

unknowStationIndex 1.3.6.1.4.1.4526.4.3.2.8.1.1
This attribute shall indicate sequence number (ID) of the detected unknow Station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

unknowStationAuthorize 1.3.6.1.4.1.4526.4.3.2.8.1.2
This attribute is used to authorize the Station to the authorized Station List.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

unknowStationMacAddress 1.3.6.1.4.1.4526.4.3.2.8.1.3
This attribute shall indicate MAC address of the Station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(6..17)  

unknowStationChannel 1.3.6.1.4.1.4526.4.3.2.8.1.4
This attribute shall indicate the channel number of the Station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..5)  

unknowStationAutoCellEnabled 1.3.6.1.4.1.4526.4.3.2.8.1.5
This attribute shall indicate whether the AutoCell is enabled on the Station or not.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..5)  

wlanAuthorizedStationTable 1.3.6.1.4.1.4526.4.3.2.9
wireless Authorized Station attributes in tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanAuthorizedStationEntry

wlanAuthorizedStationEntry 1.3.6.1.4.1.4526.4.3.2.9.1
An entry in the wlanAuthorizedStationTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet- standard MIB is one-to-one. As such, the value of an radioIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanAuthorizedStationEntry  

authorizedStationIndex 1.3.6.1.4.1.4526.4.3.2.9.1.1
This attribute shall indicate sequence number (ID) of the detected authorized Station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

authorizedStationDelete 1.3.6.1.4.1.4526.4.3.2.9.1.2
This attribute is used to delete the Station from authorized Station List.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

authorizedStationMacAddress 1.3.6.1.4.1.4526.4.3.2.9.1.3
This attribute shall indicate MAC address of the Station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(6..17)  

authorizedStationChannel 1.3.6.1.4.1.4526.4.3.2.9.1.4
This attribute shall indicate the channel number of the Station.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..5)  

authorizedStationAutoCellEnabled 1.3.6.1.4.1.4526.4.3.2.9.1.5
This attribute shall indicate whether the AutoCell is enabled on the Station or not.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..5)  

vlanSettings 1.3.6.1.4.1.4526.4.3.3
OBJECT IDENTIFIER    

vlanEnable 1.3.6.1.4.1.4526.4.3.3.1
This attribute shall indicate whether vlan(802.1Q) is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

managementVlanId 1.3.6.1.4.1.4526.4.3.3.2
This attribute shall indicate the management VLAN ID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4095  

securityProfileVlanTable 1.3.6.1.4.1.4526.4.3.3.3
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SecurityProfileVlanEntry

securityProfileVlanEntry 1.3.6.1.4.1.4526.4.3.3.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SecurityProfileVlanEntry  

profileNo 1.3.6.1.4.1.4526.4.3.3.3.1.1
the field indicates the security profile NO.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

profileVlan 1.3.6.1.4.1.4526.4.3.3.3.1.2
the field indicates the security profile's VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4095  

sysStatistics 1.3.6.1.4.1.4526.4.3.4
OBJECT IDENTIFIER    

ethernetStat 1.3.6.1.4.1.4526.4.3.4.1
OBJECT IDENTIFIER    

ethInPackets 1.3.6.1.4.1.4526.4.3.4.1.1
the field indicates the sum of received packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ethOutPackets 1.3.6.1.4.1.4526.4.3.4.1.2
the field indicates the sum of transmitted packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ethInBytes 1.3.6.1.4.1.4526.4.3.4.1.3
the field indicates the sum of received bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ethOutBytes 1.3.6.1.4.1.4526.4.3.4.1.4
the field indicates the sum of transmitted bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wirelessStatTable 1.3.6.1.4.1.4526.4.3.4.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessStatEntry

wirelessStatEntry 1.3.6.1.4.1.4526.4.3.4.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  WirelessStatEntry  

wlanSecurityProfileNo 1.3.6.1.4.1.4526.4.3.4.2.1.1
the field indicates the security profile NO.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

wlanInPacketsUnicast 1.3.6.1.4.1.4526.4.3.4.2.1.2
the field indicates the sum of received unicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanOutPacketsUnicast 1.3.6.1.4.1.4526.4.3.4.2.1.3
the field indicates the sum of transmitted unicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanInPacketsBroadcast 1.3.6.1.4.1.4526.4.3.4.2.1.4
the field indicates the sum of received broadcast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanOutPacketsBroadcast 1.3.6.1.4.1.4526.4.3.4.2.1.5
the field indicates the sum of transmitted broadcast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanInPacketsMulticast 1.3.6.1.4.1.4526.4.3.4.2.1.6
the field indicates the sum of received multicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanOutPacketsMulticast 1.3.6.1.4.1.4526.4.3.4.2.1.7
the field indicates the sum of transmitted multicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanInPacketsTotal 1.3.6.1.4.1.4526.4.3.4.2.1.8
the field indicates the sum of received packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanOutPacketsTotal 1.3.6.1.4.1.4526.4.3.4.2.1.9
the field indicates the sum of transmitted packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanInBytesTotal 1.3.6.1.4.1.4526.4.3.4.2.1.10
the field indicates the sum of received bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanOutBytesTotal 1.3.6.1.4.1.4526.4.3.4.2.1.11
the field indicates the sum of transmitted bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ethWrongPackets 1.3.6.1.4.1.4526.4.3.4.3
the field indicates the sum of wrong Ethernet packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wrongWLANSTAPackets 1.3.6.1.4.1.4526.4.3.4.4
the field indicates the sum of wrong wireless station packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanStationCount 1.3.6.1.4.1.4526.4.3.4.5
the field indicates the number of stations.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wirelessLinkStatTable 1.3.6.1.4.1.4526.4.3.4.6
The table is for wireless client's association request, successful associated, granted access and aggregative clients disconnection with date & time section and read flag information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WirelessLinkStatEntry

wirelessLinkStatEntry 1.3.6.1.4.1.4526.4.3.4.6.1
Providing entries for wirelessLinkStatTable
Status: current Access: not-accessible
OBJECT-TYPE    
  WirelessLinkStatEntry  

wirelessLinkStatIndex 1.3.6.1.4.1.4526.4.3.4.6.1.1
This field indicates the index of this statistic records.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

wirelessLinkStatDate 1.3.6.1.4.1.4526.4.3.4.6.1.2
This field indicates the date of this statistic record in the format: YYYY/MM/DD.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..20)  

wirelessLinkStatTime 1.3.6.1.4.1.4526.4.3.4.6.1.3
This field indicates the time slice of this statistic record. Total 24 time slice are defined in one day, such as time scale 0 is from 12am to 1am, time scale 1 is from 1am to 2 am, and so forth
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..23  

wirelessLinkStatRequest 1.3.6.1.4.1.4526.4.3.4.6.1.4
This field indicates the statistic of Association Request to the AP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wirelessLinkStatResponse 1.3.6.1.4.1.4526.4.3.4.6.1.5
This field indicates the statistic of Association Response sent by the AP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wirelessLinkStatGrant 1.3.6.1.4.1.4526.4.3.4.6.1.6
This field indicates the statistic of Successful Association with the AP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wirelessLinkStatDisconnect 1.3.6.1.4.1.4526.4.3.4.6.1.7
This field indicates the statistic how many AP detects client's disconnection due to timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wirelessLinkStatDisconnectAll 1.3.6.1.4.1.4526.4.3.4.6.1.8
This field indicates the statistic that the AP detects all wireless clients (>1) disconnecting within 1 second
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wirelessLinkStatFlag 1.3.6.1.4.1.4526.4.3.4.6.1.9
This field indicates if the network management system has already read this record. When network management system read the record successfully, it should set it to 1. If this field is set to be 1, the record will be deleted if the time slice is over.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wlanAuthenticatedStationCount 1.3.6.1.4.1.4526.4.3.4.8
The field indicates the number of stations that 802.1x authenticated.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sysTotalMemory 1.3.6.1.4.1.4526.4.3.4.9
The field indicates the total memory size of the system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sysFreeMemory 1.3.6.1.4.1.4526.4.3.4.10
The field indicates the current free memory size of the system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

sysRuntime 1.3.6.1.4.1.4526.4.3.4.11
The field indicates the time (in hundredths of a second) since the system was last re-initialized.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

radiusSettings 1.3.6.1.4.1.4526.4.3.5
OBJECT IDENTIFIER    

radiusAuthPrimaryServer 1.3.6.1.4.1.4526.4.3.5.1
OBJECT IDENTIFIER    

radiusAuthPrimaryServerIP 1.3.6.1.4.1.4526.4.3.5.1.1
This field shall indicate the primary authentication RADIUS server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

radiusAuthPrimaryServerPort 1.3.6.1.4.1.4526.4.3.5.1.2
This field shall indicate the primary authentication RADIUS server port number. Default: 1812.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

radiusAuthPrimaryServerSecret 1.3.6.1.4.1.4526.4.3.5.1.3
This field shall indicate the primary authentication RADIUS server shared secret string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

radiusAuthSecondaryServer 1.3.6.1.4.1.4526.4.3.5.2
OBJECT IDENTIFIER    

radiusAuthSecondaryServerIP 1.3.6.1.4.1.4526.4.3.5.2.1
This field shall indicate the secondary authentication RADIUS server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

radiusAuthSecondaryServerPort 1.3.6.1.4.1.4526.4.3.5.2.2
This field shall indicate the secondary authentication RADIUS server port number. Default: 1812.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

radiusAuthSecondaryServerSecret 1.3.6.1.4.1.4526.4.3.5.2.3
This field shall indicate the secondary authentication RADIUS server shared secret string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

authenticationSettings 1.3.6.1.4.1.4526.4.3.5.3
OBJECT IDENTIFIER    

reauthTime 1.3.6.1.4.1.4526.4.3.5.3.1
This attribute shall indicate 802.1x reauth time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1800..36000  

wpaGroupKeyUpdateCondition 1.3.6.1.4.1.4526.4.3.5.3.2
This attribute shall indicate WPA group key update condition.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER never(0), seconds(1), disconnect(2), secondsAndDisconnect(3)  

wpaGroupKeyUpdateIntervalSecond 1.3.6.1.4.1.4526.4.3.5.3.3
This fields indicates the wpa keyupdate sec interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

radiusAccountPrimaryServer 1.3.6.1.4.1.4526.4.3.5.4
OBJECT IDENTIFIER    

radiusAccountPrimaryServerIP 1.3.6.1.4.1.4526.4.3.5.4.1
This field shall indicate the primary account RADIUS server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

radiusAccountPrimaryServerPort 1.3.6.1.4.1.4526.4.3.5.4.2
This field shall indicate the primary account RADIUS server port number. Default: 1813.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

radiusAccountPrimaryServerSecret 1.3.6.1.4.1.4526.4.3.5.4.3
This field shall indicate the primary account RADIUS server shared secret string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

radiusAccountSecondaryServer 1.3.6.1.4.1.4526.4.3.5.5
OBJECT IDENTIFIER    

radiusAccountSecondaryServerIP 1.3.6.1.4.1.4526.4.3.5.5.1
This field shall indicate the secondary account RADIUS server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

radiusAccountSecondaryServerPort 1.3.6.1.4.1.4526.4.3.5.5.2
This field shall indicate the secondary account RADIUS server port number. Default: 1813.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

radiusAccountSecondaryServerSecret 1.3.6.1.4.1.4526.4.3.5.5.3
This field shall indicate the secondary account RADIUS server shared secret string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

hotspotSettings 1.3.6.1.4.1.4526.4.3.6
OBJECT IDENTIFIER    

httpRedirectEnable 1.3.6.1.4.1.4526.4.3.6.1
This attribute shall indicate whether the HTTP redirect is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

httpRedirectUrl 1.3.6.1.4.1.4526.4.3.6.2
This attribute shall indicate http redirect URL.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

syslogSettings 1.3.6.1.4.1.4526.4.3.7
OBJECT IDENTIFIER    

syslogEnable 1.3.6.1.4.1.4526.4.3.7.1
This attribute shall indicate whether the syslog is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

syslogServerIP 1.3.6.1.4.1.4526.4.3.7.2
This attributes shall indicates the IP address of the syslog server. ***The value can only be set to an IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

syslogServerPort 1.3.6.1.4.1.4526.4.3.7.3
This attributes shall indicates the Port of the Syslog server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

remoteMgmtSettings 1.3.6.1.4.1.4526.4.3.8
OBJECT IDENTIFIER    

snmpEnable 1.3.6.1.4.1.4526.4.3.8.1
This attribute shall indicate whether the SNMP agent is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

snmpManageIP 1.3.6.1.4.1.4526.4.3.8.2
The field indicates the SNMP manage IP address. ***The value can only be set to an IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

snmpTrapServerIP 1.3.6.1.4.1.4526.4.3.8.3
The field indicates the SNMP trap server IP address. ***The value can only be set to an IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

snmpReadCommunity 1.3.6.1.4.1.4526.4.3.8.4
The field indicates the SNMP read only community name. ***The value can only be set to 1 to 32 readable string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

snmpWriteCommunity 1.3.6.1.4.1.4526.4.3.8.5
The field indicates the SNMP read write community name. ***The value can only be set to 1 to 32 readable string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

snmpTrapPort 1.3.6.1.4.1.4526.4.3.8.6
This field shall indicate the port for trap. Default: 162.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

mgmtWebAccessCtrl 1.3.6.1.4.1.4526.4.3.8.8
This attribute shall allow you to turn the WEB access control on or off.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

mgmtWebIPSubnet1 1.3.6.1.4.1.4526.4.3.8.9
The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(7..31)  

mgmtWebIPSubnet2 1.3.6.1.4.1.4526.4.3.8.10
The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(7..31)  

mgmtWebIPSubnet3 1.3.6.1.4.1.4526.4.3.8.11
The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(7..31)  

mgmtWebIPSubnet4 1.3.6.1.4.1.4526.4.3.8.12
The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(7..31)  

mgmtWebIPSubnet5 1.3.6.1.4.1.4526.4.3.8.13
The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(7..31)  

mgmtWebIPSubnet6 1.3.6.1.4.1.4526.4.3.8.14
The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(7..31)  

mgmtWebIPSubnet7 1.3.6.1.4.1.4526.4.3.8.15
The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(7..31)  

mgmtWebIPSubnet8 1.3.6.1.4.1.4526.4.3.8.16
The field indicates the IP Subnet: a base IP address and a subnet mask. ***Please follow this format: xxx.xxx.xxx.xxx/xxx.xxx.xxx.xxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(7..31)  

auxCommand 1.3.6.1.4.1.4526.4.3.9
OBJECT IDENTIFIER    

resetAP 1.3.6.1.4.1.4526.4.3.9.1
This a command field for conntrol AP action. Write any value to reset the AP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

resetToFactoryDefault 1.3.6.1.4.1.4526.4.3.9.2
This a command field for conntrol AP action. Write any value to reset the Access Point to the original factory default settings.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue