WG302-MIB

File: WG302-MIB.mib (34011 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
RFC1213-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
enterprises Integer32 Counter32
IpAddress Unsigned32 TimeTicks
MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
TEXTUAL-CONVENTION DisplayString MacAddress
TruthValue ifIndex

Defined Types

WlanSettingEntry  
SEQUENCE    
  operatemode INTEGER
  countrycode INTEGER
  ssid DisplayString
  channel INTEGER
  datarate DisplayString
  beaconinterval INTEGER
  rtsthreshold INTEGER
  fraglength INTEGER
  dtiminterval INTEGER
  preambletype INTEGER
  hidenetworkname TruthValue
  txpower INTEGER
  superG TruthValue
  antenna INTEGER

SecurityEntry  
SEQUENCE    
  authenticationtype INTEGER
  encryption INTEGER
  encryptionstrength INTEGER
  keyno INTEGER
  key1 DisplayString
  key2 DisplayString
  key3 DisplayString
  key4 DisplayString
  wlanseparator TruthValue
  presharekey DisplayString

StationListEntry  
SEQUENCE    
  macaddress MacAddress
  ipaddr IpAddress
  stationstatus INTEGER

Defined Values

accesspoint 1.3.6.1.4.1.4526.4.2
The MIB module for 802.11g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).accesspoint(2)
MODULE-IDENTITY    

netgear 1.3.6.1.4.1.4526
OBJECT IDENTIFIER    

wireless 1.3.6.1.4.1.4526.4
OBJECT IDENTIFIER    

lanSettings 1.3.6.1.4.1.4526.4.2.1
OBJECT IDENTIFIER    

apName 1.3.6.1.4.1.4526.4.2.1.1
The field indicates the name of AP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

adminName 1.3.6.1.4.1.4526.4.2.1.2
The field indicates the administrator name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..32)  

adminPasswd 1.3.6.1.4.1.4526.4.2.1.3
The field indicates the administrator password. The AP can be managed in such way as utility,telnet and so on.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..32)  

dhcpStatus 1.3.6.1.4.1.4526.4.2.1.4
This attribute shall indicate whether dhcp client status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(0), dhcpclient(1)  

ipAddr 1.3.6.1.4.1.4526.4.2.1.5
The field indicates the IP address of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same IP address, when worked in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netmaskAddr 1.3.6.1.4.1.4526.4.2.1.6
The field indicates the netmask of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same netmask address,when worked in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gatewayAddr 1.3.6.1.4.1.4526.4.2.1.7
The field indicates the gateway of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same gateway address,when worked in bridge mode.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

spantree 1.3.6.1.4.1.4526.4.2.1.8
This attribute shall indicate spanning tree.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

pridnsipAddr 1.3.6.1.4.1.4526.4.2.1.9
This attributes shall indicates the IP address of the primary DNS server. ***The value can only be set to an IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

snddnsipAddr 1.3.6.1.4.1.4526.4.2.1.10
This attributes shall indicates the IP address of the secondary DNS server. ***The value can only be set to an IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wlanSettingTable 1.3.6.1.4.1.4526.4.2.2
wlanSettingsallow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WlanSettingEntry

wlanSettingEntry 1.3.6.1.4.1.4526.4.2.2.1
An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  WlanSettingEntry  

operatemode 1.3.6.1.4.1.4526.4.2.2.1.1
This attribute shall indicate the desired wireless operating mode. The option are: auto - Both 802.11g and 802.11b wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), dot11b(2), dot11g(3)  

ssid 1.3.6.1.4.1.4526.4.2.2.1.2
This attribute shall indicate SSID.Its length can't be large than 33 .
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

countrycode 1.3.6.1.4.1.4526.4.2.2.1.3
This attribute shall indicate the region of operation for which which the wireless interface is inted. =410: asia =36: australia =124: canada =208: denmark =40: europe =246: finland =250: france =276: germany =372: ireland =380: italy =392: japan =484: mexico =528: netherlands =554: new zealand =578: norway =630: puerto rico =756: switzerland =340: south america =724: spain =752: sweden =826: unitedKingdom =840: usa
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER asia(410), australia(36), canada(124), denmark(208), europe(40), finland(246), france(250), germany(276), ireland(372), italy(380), japan(392), mexico(484), netherlands(528), newzealand(554), norway(578), puertorico(630), southamerica(340), spain(724), sweden(752), switzerland(756), unitedkingdom(826), unitedstates(840)  

channel 1.3.6.1.4.1.4526.4.2.2.1.4
This attribute shall indicate the channel number to use on your Wireless LAN. 1: CH01 2412MHz 2: CH02 2417MHz 3: CH03 2422MHz 4: CH04 2427MHz 5: CH05 2432MHz 6: CH06 2437MHz 7: CH07 2442MHz 8: CH08 2447MHz 9: CH09 2452MHz 10: CH10 2457MHz 11: CH11 2462MHz 12: CH12 2467MHz 13: CH13 2472MHz 14: CH14 2484MHz The default value is 11.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..14  

datarate 1.3.6.1.4.1.4526.4.2.2.1.5
This attribute shall indicate the transmite rate. When operatemode is auto(0) can set to 0:best,1:1Mb/s,2:2Mb/s, 5.5:5.5Mb/s,11:11 Mb/s, 6:6Mb/s,9: 9Mb/s,12:12Mb/s,18:8Mb/s,24:24Mb/s 36:36Mb/s,48:48Mb/s,54:54Mb/s . When operatemode is dot11b(2) can set to 0:best,1:1Mb/s,2:2Mb/s,5.5:5.5Mb/s,11:11 Mb/s. When operatemode is dot11g(3) can set to 0:best,6:6Mb/s,9:9Mb/s,12:12Mb/s,18:18Mb/s,24:24Mb/s 36:36Mb/s,48:48Mb/s,54:54Mb/s,108:108Mb/s.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..3)  

beaconinterval 1.3.6.1.4.1.4526.4.2.2.1.6
This attribute shall indicate the Beacon Interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..1000  

rtsthreshold 1.3.6.1.4.1.4526.4.2.2.1.7
This attribute shall indicate the RTS threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2346  

fraglength 1.3.6.1.4.1.4526.4.2.2.1.8
This attribute shall indicate the fragmentation threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 256..2346  

dtiminterval 1.3.6.1.4.1.4526.4.2.2.1.9
This attribute shall indicate the DTIM period.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

preambletype 1.3.6.1.4.1.4526.4.2.2.1.10
This attribute shall indicate the preamble setting.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER long(0), auto(1)  

hidenetworkname 1.3.6.1.4.1.4526.4.2.2.1.11
This attribute shall indicate whether broadcast wireless network Name (SSID).
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

txpower 1.3.6.1.4.1.4526.4.2.2.1.12
This attribute shall indicate the tranmiste power.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(0), half(1), quarter(2), eighth(3), min(4)  

superG 1.3.6.1.4.1.4526.4.2.2.1.13
This attribute shall indicate whether super-G.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

antenna 1.3.6.1.4.1.4526.4.2.2.1.14
This attribute shall indicate the tranmiste power.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), primary(1), secondary(2)  

securityTable 1.3.6.1.4.1.4526.4.2.3
Security attributes. In tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SecurityEntry

securityEntry 1.3.6.1.4.1.4526.4.2.3.1
An entry in the securityTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein.
Status: current Access: not-accessible
OBJECT-TYPE    
  SecurityEntry  

authenticationtype 1.3.6.1.4.1.4526.4.2.3.1.1
The field indicates how to authenticate the station.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER open(0), shared(1), legacy802dot1x(2), wpa(3), wpapsk(4)  

encryption 1.3.6.1.4.1.4526.4.2.3.1.2
The field indicates how to encryption the station.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), wep(1), tkip(2)  

encryptionstrength 1.3.6.1.4.1.4526.4.2.3.1.3
The field indicates the key length of default keys.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), wep64(40), wep128(104), wep152(128)  

keyno 1.3.6.1.4.1.4526.4.2.3.1.4
The field indicates the number of default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

key1 1.3.6.1.4.1.4526.4.2.3.1.5
The field indicates the key value of the first default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

key2 1.3.6.1.4.1.4526.4.2.3.1.6
The field indicates the key value of the second default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

key3 1.3.6.1.4.1.4526.4.2.3.1.7
The field indicates the key value of the third default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

key4 1.3.6.1.4.1.4526.4.2.3.1.8
The field indicates the key value of the fourth default wep key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

wlanseparator 1.3.6.1.4.1.4526.4.2.3.1.9
This attribute shall indicate whether enable No see.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

presharekey 1.3.6.1.4.1.4526.4.2.3.1.10
This attribute shall indicate preshare key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

remoteSettings 1.3.6.1.4.1.4526.4.2.4
OBJECT IDENTIFIER    

sshd 1.3.6.1.4.1.4526.4.2.4.1
This attribute shall indicate whether enable sshd.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

snmpenable 1.3.6.1.4.1.4526.4.2.4.2
This attribute shall indicate whether enable snmp.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

trapServerIP 1.3.6.1.4.1.4526.4.2.4.3
The field indicates the trap server IP address. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

readOnlyCommunity 1.3.6.1.4.1.4526.4.2.4.4
The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

readWriteCommunity 1.3.6.1.4.1.4526.4.2.4.5
The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..31)  

statistic 1.3.6.1.4.1.4526.4.2.5
OBJECT IDENTIFIER    

wiredethernetstat 1.3.6.1.4.1.4526.4.2.5.1
OBJECT IDENTIFIER    

lanrecvpacket 1.3.6.1.4.1.4526.4.2.5.1.1
the field indicates the sum of received packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

lantranspacket 1.3.6.1.4.1.4526.4.2.5.1.2
the field indicates the sum of transmitted packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

lanrecvbytes 1.3.6.1.4.1.4526.4.2.5.1.3
the field indicates the sum of received bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

lantransbytes 1.3.6.1.4.1.4526.4.2.5.1.4
the field indicates the sum of transmitted bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wirelessstat 1.3.6.1.4.1.4526.4.2.5.2
OBJECT IDENTIFIER    

wlanrecvunicastpacket 1.3.6.1.4.1.4526.4.2.5.2.1
the field indicates the sum of received unicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantransunicastpacket 1.3.6.1.4.1.4526.4.2.5.2.2
the field indicates the sum of transmitted unicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanrecvbroadcastpacket 1.3.6.1.4.1.4526.4.2.5.2.3
the field indicates the sum of received broadcast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantransbroadcastpacket 1.3.6.1.4.1.4526.4.2.5.2.4
the field indicates the sum of transmitted broadcast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanrecvmulticastpacket 1.3.6.1.4.1.4526.4.2.5.2.5
the field indicates the sum of received multicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantransmulticastpacket 1.3.6.1.4.1.4526.4.2.5.2.6
the field indicates the sum of transmitted multicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanrecvpacket 1.3.6.1.4.1.4526.4.2.5.2.7
the field indicates the sum of received packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantranspacket 1.3.6.1.4.1.4526.4.2.5.2.8
the field indicates the sum of transmitted packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlanrecvbytes 1.3.6.1.4.1.4526.4.2.5.2.9
the field indicates the sum of received bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wlantransbytes 1.3.6.1.4.1.4526.4.2.5.2.10
the field indicates the sum of transmitted bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

stationnumber 1.3.6.1.4.1.4526.4.2.5.2.11
This attribute shall indicate the stations count.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

stationListTable 1.3.6.1.4.1.4526.4.2.6
stationList Table show multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StationListEntry

stationListEntry 1.3.6.1.4.1.4526.4.2.6.1
stationlist Entry show the connected station status
Status: current Access: not-accessible
OBJECT-TYPE    
  StationListEntry  

macaddress 1.3.6.1.4.1.4526.4.2.6.1.1
This attribute shall indicate MAC address of the associated stationID.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

ipaddr 1.3.6.1.4.1.4526.4.2.6.1.2
This attribute shall indicate Ip address of the associated stationID.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

stationstatus 1.3.6.1.4.1.4526.4.2.6.1.3
This attribute shall indicate the status of station.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), authenticating(1), authenticated(2), associating(3), associated(4)  

operationapmode 1.3.6.1.4.1.4526.4.2.7
OBJECT IDENTIFIER    

apmode 1.3.6.1.4.1.4526.4.2.7.1
This a command field for conntrol AP operation mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ap(0), ptp(2), ptp-ap(3), pxp(4), pxp-ap(5), repeater(6)  

ptpremotemacaddress 1.3.6.1.4.1.4526.4.2.7.2
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

pxpremotemacaddress1 1.3.6.1.4.1.4526.4.2.7.3
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

pxpremotemacaddress2 1.3.6.1.4.1.4526.4.2.7.4
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

pxpremotemacaddress3 1.3.6.1.4.1.4526.4.2.7.5
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

pxpremotemacaddress4 1.3.6.1.4.1.4526.4.2.7.6
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

repremotemacaddress1 1.3.6.1.4.1.4526.4.2.7.7
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

repremotemacaddress2 1.3.6.1.4.1.4526.4.2.7.8
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

repremotemacaddress3 1.3.6.1.4.1.4526.4.2.7.9
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

repremotemacaddress4 1.3.6.1.4.1.4526.4.2.7.10
This attribute shall indicate the stationID.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

info802dot1x 1.3.6.1.4.1.4526.4.2.8
OBJECT IDENTIFIER    

authinfo 1.3.6.1.4.1.4526.4.2.8.1
OBJECT IDENTIFIER    

priradipaddr 1.3.6.1.4.1.4526.4.2.8.1.1
Internet address of the Primary Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

priradport 1.3.6.1.4.1.4526.4.2.8.1.2
Port number used for authentication at the Primary Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

priradsharedsecret 1.3.6.1.4.1.4526.4.2.8.1.3
Secret shared between NAS and the Primary Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

sndradipaddr 1.3.6.1.4.1.4526.4.2.8.1.4
Internet address of the Second Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sndradport 1.3.6.1.4.1.4526.4.2.8.1.5
Port number used for authentication at the Second Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sndradsharedsecret 1.3.6.1.4.1.4526.4.2.8.1.6
Secret shared between NAS and the Second Radius Server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

reauthtime 1.3.6.1.4.1.4526.4.2.8.1.7
Current Login Status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

accntinfo 1.3.6.1.4.1.4526.4.2.8.2
OBJECT IDENTIFIER    

priacntipaddr 1.3.6.1.4.1.4526.4.2.8.2.1
IP address of the Primary radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

priacntport 1.3.6.1.4.1.4526.4.2.8.2.2
port number of the Primary radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

priacntsharedsecret 1.3.6.1.4.1.4526.4.2.8.2.3
password used by the ap to connect to the Primary radius account serve.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

sndacntipaddr 1.3.6.1.4.1.4526.4.2.8.2.4
IP address of the Second radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sndacntport 1.3.6.1.4.1.4526.4.2.8.2.5
port number of the Second radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sndacntsharedsecret 1.3.6.1.4.1.4526.4.2.8.2.6
password used by the ap to connect to the Second radius account server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userCommand 1.3.6.1.4.1.4526.4.2.9
OBJECT IDENTIFIER    

resetAP 1.3.6.1.4.1.4526.4.2.9.1
This a command field for conntrol AP action. Write any value to reset the AP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

setWirelessstatus 1.3.6.1.4.1.4526.4.2.9.2
This a command field for conntrol AP's wireless card action. 0: enable wireless card 1: disable wireless card
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

timeSettings 1.3.6.1.4.1.4526.4.2.10
OBJECT IDENTIFIER    

currenttime 1.3.6.1.4.1.4526.4.2.10.1
This attributes shall indicates the current system time in a format: YYYY/MM/DD hh:mm:ss.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..20)  

timezone 1.3.6.1.4.1.4526.4.2.10.2
This attribute shall indicate the timezone of the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gmtwest12-international-date-line-west(0), gmtwest11-midway-island-samoa(1), gmtwest10-hawaii(2), gmtwest09-alaska(3), gmtwest08-pacific-time-us-canada-tijuana(4), gmtwest07-arizona(5), gmtwest07-chihuahua-la-paz-mazatlan(6), gmtwest07-mountain-time-us-canada(7), gmtwest06-central-america(8), gmtwest06-central-time-us-canada(9), gmtwest06-guadalajara-mexico-city-monterrey(10), gmtwest06-saskatchewan(11), gmtwest05-bogota-lima-quito(12), gmtwest05-eastern-time-us-canada(13), gmtwest05-indiana-east(14), gmtwest04-atlantic-Time-canada(15), gmtwest04-caracas-la-paz(16), gmtwest04-santiago(17), gmtwest03-30-newfoundland(18), gmtwest03-brasilia(19), gmtwest03-buenos-aires-georgetown(20), gmtwest03-greenland(21), gmtwest02-mid-atlantic(22), gmtwest01-azores(23), gmtwest01-cape-verde-is(24), gmt00-casablanca-monrovia(25), gmt00-greenwich-mean-time-dublin-edinburgh-lisbon-London(26), gmteast01-amsterdam-berlin-bern-rome-stockholm-vienna(27), gmteast01-belgrade-bratislava-budapest-ljubljana-prague(28), gmteast01-brussels-copenhagen-madrid-paris(29), gmteast01-sarajevo-skopje-warsaw-zagreb(30), gmteast01-west-central-africa(31), gmteast02-athens-istanbul-minsk(32), gmteast02-bucharest(33), gmteast02-cairo(34), gmteast02-harare-pretoria(35), gmteast02-helsinki-kyiv-riga-sofia-tallinn-vilnius(36), gmteast02-jerusalem(37), gmteast03-baghdad(38), gmteast03-kuwait-riyadh(39), gmteast03-moscow-st-petersburg-volgograd(40), gmteast03-nairobi(41), gmteast03-tehran(42), gmteast04-abu-dhabi-muscat(43), gmteast04-baku-tbilisi-yerevan(44), gmteast04-kabul(45), gmteast05-ekaterinburg(46), gmteast05-islamabad-karachi-kashkent(47), gmteast05-chennai-kolkata-mumbai-new-delhi(48), gmteast05-kathmandu(49), gmteast06-almaty-novosibirsk(50), gmteast06-astana-dhaka(51), gmteast06-sri-jayawardenepura(52), gmteast06-rangoon(53), gmteast07-bangkok-hanoi-jakarta(54), gmteast07-krasnoyarsk(55), gmteast08-beijing-chongqing-hong-kong-urumqi(56), gmteast08-irkutsk-ulaan-bataar(57), gmteast08-kuala-lumpur-singapore(58), gmteast08-perth(59), gmteast08-taipei(60), gmteast09-osaka-sapporo-tokyo(61), gmteast09-seoul(62), gmteast09-yakutsk(63), gmteast09-adelaide(64), gmteast09-darwin(65), gmteast10-brisbane(66), gmteast10-canberra-melbourne-sydney(67), gmteast10-guam-port-moresby(68), gmteast10-hobart(69), gmteast10-vladivostok(70), gmteast11-magadan-solomon-is-new-caledonia(71), gmteast12-auckland-wellington(72), gmteast12-fiji-kamchatka-marshall-is(73), gmteast13-nuku-alofa(74)  

daylightsaving 1.3.6.1.4.1.4526.4.2.10.3
This attribute shall indicate the Daylight Saving time.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dhcpsSettings 1.3.6.1.4.1.4526.4.2.11
OBJECT IDENTIFIER    

dhcpserver 1.3.6.1.4.1.4526.4.2.11.1
This attribute shall indicate whether DHCP server is enable or disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dhcpsipstart 1.3.6.1.4.1.4526.4.2.11.2
This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpsipend 1.3.6.1.4.1.4526.4.2.11.3
This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpnetmask 1.3.6.1.4.1.4526.4.2.11.4
This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpsgateway 1.3.6.1.4.1.4526.4.2.11.5
This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpspridns 1.3.6.1.4.1.4526.4.2.11.6
This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpspsnddns 1.3.6.1.4.1.4526.4.2.11.7
This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpspriwins 1.3.6.1.4.1.4526.4.2.11.8
This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpspsndwins 1.3.6.1.4.1.4526.4.2.11.9
This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpsleasetime 1.3.6.1.4.1.4526.4.2.11.10
This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 15..44640  

anyip 1.3.6.1.4.1.4526.4.2.11.11
This attribute shall indicate whether AnyIP function is enable or disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

logSettings 1.3.6.1.4.1.4526.4.2.12
OBJECT IDENTIFIER    

syslog 1.3.6.1.4.1.4526.4.2.12.1
This attribute shall indicate whether syslog is enable or disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

syslogsrvip 1.3.6.1.4.1.4526.4.2.12.2
This attributes shall indicates the IP address of the syslog server. ***The value can only be set to a IP address in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

syslogsrvport 1.3.6.1.4.1.4526.4.2.12.3
This attributes shall indicates the Port of the Syslog server. *** The value can only be set to a port in dot format.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor