WWP-LEOS-MULTICAST-FILTER-MIB

File: WWP-LEOS-MULTICAST-FILTER-MIB.mib (40569 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC WWP-SMI

Imported symbols

IpAddress Integer32 Counter32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
MacAddress RowStatus TruthValue
TEXTUAL-CONVENTION wwpModulesLeos

Defined Types

VlanId  
A Vlan Id represents a Broadcast Domain.
TEXTUAL-CONVENTION    
  Integer32 1..24576  

WwpLeosMcastFilterActivationEntry  
SEQUENCE    
  wwpLeosMcastVlanId VlanId
  wwpLeosMcastFilterAdminState INTEGER
  wwpLeosMcastFilterOperState INTEGER
  wwpLeosMcastFilterState RowStatus

WwpLeosMcastFilterServerPortEntry  
SEQUENCE    
  wwpLeosMcastServerPortId Integer32
  wwpLeosMcastServerPortStatus RowStatus

WwpLeosMcastIgmpSnoopEntry  
SEQUENCE    
  wwpLeosMcastIgmpSnoopEnable TruthValue
  wwpLeosMcastIgmpSnoopRobustness Integer32
  wwpLeosMcastIgmpSnoopProxyQueryInterval Integer32
  wwpLeosMcastIgmpSnoopProxyQueryReplyTmo Integer32
  wwpLeosMcastIgmpSnoopProxyQueryDelay Integer32
  wwpLeosMcastIgmpSnoopLingerTmo Integer32
  wwpLeosMcastIgmpQueryEngineState INTEGER
  wwpLeosMcastIgmpProxyQuerySrcIp IpAddress
  wwpLeosMcastIgmpRouterQueryInterval INTEGER
  wwpLeosMcastIgmpMinResponseTime INTEGER
  wwpLeosMcastIgmpDefaultRouterPort INTEGER
  wwpLeosMcastIgmpInquisitiveLeaveState INTEGER
  wwpLeosMcastIgmpLastMemberQueryInterval INTEGER
  wwpLeosMcastIgmpPriority INTEGER
  wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr IpAddress
  wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr IpAddress
  wwpLeosMcastIgmpSnoopActiveLingerTimeout INTEGER
  wwpLeosMcastIgmpSnoopServerTopology INTEGER
  wwpLeosMcastIgmpSnoopRapidRecoveryMode INTEGER

WwpLeosMcastChannelStreamEntry  
SEQUENCE    
  wwpLeosMcastChanelStreamStartGroupAddr IpAddress
  wwpLeosMcastChanelStreamEndGroupAddr IpAddress
  wwpLeosMcastChannelStreamStatus RowStatus

WwpLeosMcastGroupEntry  
SEQUENCE    
  wwpLeosMcastGroupAddr IpAddress
  wwpLeosMcastState INTEGER
  wwpLeosMcastType INTEGER
  wwpLeosMcastSource INTEGER
  wwpLeosMcastMemberCount Counter32

WwpLeosMcastGroupMemberEntry  
SEQUENCE    
  wwpLeosMcastPortId Integer32
  wwpLeosMcastPortTagId Integer32

WwpLeosMcastFilterStatsEntry  
SEQUENCE    
  wwpLeosMcastStaticGrpCount INTEGER
  wwpLeosMcastDynamicGrpCount INTEGER
  wwpLeosMcastJoinMessages Counter32
  wwpLeosMcastLeaveMessages Counter32
  wwpLeosMcastQueryMessages Counter32
  wwpLeosMcastQueryDiscards Counter32
  wwpLeosMcastQueryTimeouts Counter32
  wwpLeosMcastUnknownPktType Counter32
  wwpLeosMcastRouterDiscards Counter32
  wwpLeosMcastHostDiscards Counter32
  wwpLeosMcastBadChecksum Counter32
  wwpLeosMcastL2L3Mismatch Counter32
  wwpLeosMcastTotalMembers Counter32
  wwpLeosMcastLingerCount Counter32
  wwpLeosMcastRouterSrcMacAddr MacAddress
  wwpLeosMcastRouterSrcIpAddr IpAddress
  wwpLeosMcastRouterPortId INTEGER
  wwpLeosMcastReportSendPortId INTEGER
  wwpLeosMcastStatsClear INTEGER
  wwpLeosMcastStatsQuerySrcIpZeroDiscard Counter32

WwpLeosMcastFilterConfigEntry  
SEQUENCE    
  wwpLeosMcastFilterUPFActivate TruthValue
  wwpLeosMcastUnresolvedAction INTEGER
  wwpLeosMcastFilterWKMFLocalActivate INTEGER
  wwpLeosMcastFilterWKMFInternetActivate INTEGER
  wwpLeosMcastFilterWKMFAdhocActivate INTEGER
  wwpLeosMcastFilterWKMFStMulticastActivate INTEGER
  wwpLeosMcastFilterWKMFSdpSapActivate INTEGER

WwpLeosMcastChannelStreamExPortMemEntry  
SEQUENCE    
  wwpLeosMcastChannelStreamExPortId INTEGER
  wwpLeosMcastChannelStreamExPortMemStatus RowStatus

Defined Values

wwpLeosMcastFilterMIB 1.3.6.1.4.1.6141.2.60.7
This MIB specifies the managed objects for Multicast filter specific to the WWP Products.
MODULE-IDENTITY    

wwpLeosMcastFilterMIBObjects 1.3.6.1.4.1.6141.2.60.7.1
OBJECT IDENTIFIER    

wwpLeosMcastFilterConfig 1.3.6.1.4.1.6141.2.60.7.1.1
OBJECT IDENTIFIER    

wwpLeosMcastFilterStatus 1.3.6.1.4.1.6141.2.60.7.1.2
OBJECT IDENTIFIER    

wwpLeosMcastFilterStats 1.3.6.1.4.1.6141.2.60.7.1.3
OBJECT IDENTIFIER    

wwpLeosMcastFilterMIBNotificationPrefix 1.3.6.1.4.1.6141.2.60.7.2
OBJECT IDENTIFIER    

wwpLeosMcastFilterMIBNotifications 1.3.6.1.4.1.6141.2.60.7.2.0
OBJECT IDENTIFIER    

wwpLeosMcastFilterMIBConformance 1.3.6.1.4.1.6141.2.60.7.3
OBJECT IDENTIFIER    

wwpLeosMcastFilterMIBCompliances 1.3.6.1.4.1.6141.2.60.7.3.1
OBJECT IDENTIFIER    

wwpLeosMcastFilterMIBGroups 1.3.6.1.4.1.6141.2.60.7.3.2
OBJECT IDENTIFIER    

wwpLeosMcastConfigState 1.3.6.1.4.1.6141.2.60.7.1.1.1
Setting this object will enable or disable multicast globally.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wwpLeosMcastSnoopState 1.3.6.1.4.1.6141.2.60.7.1.1.8
Setting this object will enable or disable IGMP Snooping globally on SAOS (6.x). LEOS (4.x) does not support setting IGMP snooping at a global level. It should be enabled on a per VLAN bases using the wwpLeosMcastIgmpSnoopEnable MIB object
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMcastGlobalStatsClear 1.3.6.1.4.1.6141.2.60.7.1.1.10
Setting this object to clear will clear the statistics for all the Multicast-Service filter entries. We cannot set the object to none. It is for display purpose only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosMcastFilterActivationTable 1.3.6.1.4.1.6141.2.60.7.1.1.2
The (conceptual) table listing the vlans on which the multicast filter can be applied. This table is used to create and delete entries in the multicast table and also to administratively enable/disable. To configure the IGMP Snooping on this VLAN use table wwpLeosMcastIgmpSnoopTable after creating entry in this (wwpLeosMcastFilterActivationTable) table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMcastFilterActivationEntry

wwpLeosMcastFilterActivationEntry 1.3.6.1.4.1.6141.2.60.7.1.1.2.1
An entry (conceptual row) in the wwpLeosMcastFilterActivationTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMcastFilterActivationEntry  

wwpLeosMcastVlanId 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.1
The VLAN for which this multicast filter can be enabled/disabled.
Status: current Access: read-only
OBJECT-TYPE    
  VlanId  

wwpLeosMcastFilterAdminState 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.2
Setting this object to enable will enable multicast on then given VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wwpLeosMcastFilterOperState 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.3
The object represents the operational state of multicast on the given VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wwpLeosMcastFilterState 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.4
Setting this object to createandgo(4) will create an entry in the multicast table for the given VLAN and will enable multicast on that VLAN. Setting this object to destroy will delete the entry from the multicast table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosMcastFilterServerPortTable 1.3.6.1.4.1.6141.2.60.7.1.1.3
The (conceptual) table listing the authorized server ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMcastFilterServerPortEntry

wwpLeosMcastFilterServerPortEntry 1.3.6.1.4.1.6141.2.60.7.1.1.3.1
An entry (conceptual row) in the wwpLeosMcastFilterServerPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMcastFilterServerPortEntry  

wwpLeosMcastServerPortId 1.3.6.1.4.1.6141.2.60.7.1.1.3.1.1
The server port from which the IGMP query messages can be received, and joins/leaves messages can be sent.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

wwpLeosMcastServerPortStatus 1.3.6.1.4.1.6141.2.60.7.1.1.3.1.2
This object is used to add/delete server ports from the list of authorized server ports. To add a port to the authorized server port list, a user must set this object to 'createAndGo'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosMcastIgmpSnoopTable 1.3.6.1.4.1.6141.2.60.7.1.1.4
The (conceptual) table listing the configuration parameters for the IGMP snooping.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMcastIgmpSnoopEntry

wwpLeosMcastIgmpSnoopEntry 1.3.6.1.4.1.6141.2.60.7.1.1.4.1
An entry (conceptual row) in the wwpLeosMcastIgmpSnoopTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMcastIgmpSnoopEntry  

wwpLeosMcastIgmpSnoopEnable 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.1
For LEOS (4.x) IGMP snooping can be enabled on this VLAN by setting this object to 'true'. The Management station should define the router IP address range and the list of server ports before snooping is enabled. SAOS (6.x) does not support setting IGMP snooping per VLAN. Instead it should be enabled globally using the wwpLeosMcastSnoopState MIB object
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMcastIgmpSnoopRobustness 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.2
The number of replies to send for each multicast group.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2  

wwpLeosMcastIgmpSnoopProxyQueryInterval 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.3
The interval period between each general query sent to the router. This parameter specifies how often to repeat the group specific query. Default will be 125 seconds. Note that the actual rate may be slower when the switch becomes busy, so this parameter should be thought of as a minimum time interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..999999  

wwpLeosMcastIgmpSnoopProxyQueryReplyTmo 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4
The amount of time to receive a membership report after a query message was sent. This value goes directly into the query packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..255  

wwpLeosMcastIgmpSnoopProxyQueryDelay 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.5
The amount of time to wait before sending the next group specific query downstream. General queries are sent one port at a time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

wwpLeosMcastIgmpSnoopLingerTmo 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.6
This value specifies the amount of time that a multicast filter will be in place after the last host has left. In essence it configures how long to filter the stream after all the hosts have left the group. This can tune the system as to how long the router has to remove the stream from the subnet. The minimum value is 1 second, with no maximum value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..300  

wwpLeosMcastIgmpQueryEngineState 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.7
Setting this object to disable will enable query engine on a given VLAN. Setting it to enable will enable it.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

wwpLeosMcastIgmpProxyQuerySrcIp 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.8
Setting this object will set the source ip address for the VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wwpLeosMcastIgmpRouterQueryInterval 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.9
Setting this object will set the router query interval for given VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..999999  

wwpLeosMcastIgmpMinResponseTime 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.10
Setting this object will set the minimum response time for given VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 50..600  

wwpLeosMcastIgmpDefaultRouterPort 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.11
Setting this object will set the default router port for given VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

wwpLeosMcastIgmpInquisitiveLeaveState 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.12
Setting this object will set the IGMP inquisitive leave state for given VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

wwpLeosMcastIgmpLastMemberQueryInterval 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.13
Setting this object will set the last membership query interval for given VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..100  

wwpLeosMcastIgmpPriority 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.14
Setting this object will set the priority if IGMP packets for this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.15
The first IP Address of the router IP Address range.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16
The last IP Address of the router IP Address range. When range is undefined, all leave/join messages will be forwarded to the router even when the multicast stream does not originate from the router. If the range is defined, leave/join messages will be filtered. The default value for this object should be equal to the value of wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wwpLeosMcastIgmpSnoopActiveLingerTimeout 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.17
The object specifies the active linger timeout in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..300  

wwpLeosMcastIgmpSnoopServerTopology 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.18
The object specifies the server topology.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER centralized(1), distributed(2)  

wwpLeosMcastIgmpSnoopRapidRecoveryMode 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.19
Specifies whether the rapid recovery mode is set to on or off. If this object is set to ON then device will generate and accept query packets with src IP = 0 else in the OFF state, it would not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wwpLeosMcastChannelStreamTable 1.3.6.1.4.1.6141.2.60.7.1.1.5
The (conceptual) table listing the configuration parameters for the multicast channel stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMcastChannelStreamEntry

wwpLeosMcastChannelStreamEntry 1.3.6.1.4.1.6141.2.60.7.1.1.5.1
An entry (conceptual row) in the wwpLeosMcastChannelStreamTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMcastChannelStreamEntry  

wwpLeosMcastChanelStreamStartGroupAddr 1.3.6.1.4.1.6141.2.60.7.1.1.5.1.1
The first IP Address of the multicast IP Address range.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wwpLeosMcastChanelStreamEndGroupAddr 1.3.6.1.4.1.6141.2.60.7.1.1.5.1.2
The last IP Address of the multicast IP address range. If range does not need to be specified then do not set this value.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wwpLeosMcastChannelStreamStatus 1.3.6.1.4.1.6141.2.60.7.1.1.5.1.3
This object is used to add/delete multicast groups to the channel stream. To add a multicast group to the channel stream, a user must set this object to 'createAndGo'. Device will not allow to create entry unless 'wwpLeosMcastChanelStreamStartGroupAddr' is specified. If range needs to be specified then set 'wwpLeosMcastChanelStreamEndGroupAddr' with the desired group address. If device cannot create entry for any of the IP addresses within the range then no entry will be created and an error will be returned.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosMcastGroupTable 1.3.6.1.4.1.6141.2.60.7.1.2.1
The (conceptual) table listing all the multicast groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMcastGroupEntry

wwpLeosMcastGroupEntry 1.3.6.1.4.1.6141.2.60.7.1.2.1.1
An entry (conceptual row) in the wwpLeosMcastGroupTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMcastGroupEntry  

wwpLeosMcastGroupAddr 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.1
The multicast group IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wwpLeosMcastState 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.2
The current state of the multicast stream.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), query(2), linger(3)  

wwpLeosMcastType 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.3
The type of the multicast stream.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

wwpLeosMcastSource 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.4
The source for this multicast stream.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER router(1), server(2)  

wwpLeosMcastMemberCount 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.5
The number of ports that joined the group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastGroupMemberTable 1.3.6.1.4.1.6141.2.60.7.1.2.2
The (conceptual) table listing all the port members of the multicast groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMcastGroupMemberEntry

wwpLeosMcastGroupMemberEntry 1.3.6.1.4.1.6141.2.60.7.1.2.2.1
An entry (conceptual row) in the wwpLeosMcastGroupMemberTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMcastGroupMemberEntry  

wwpLeosMcastPortId 1.3.6.1.4.1.6141.2.60.7.1.2.2.1.1
The router port from which the IGMP query messages are received, and joins/leaves messages are sent.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

wwpLeosMcastPortTagId 1.3.6.1.4.1.6141.2.60.7.1.2.2.1.2
The Virtual Lan Tag Id used by the port on this Virtual Lan. If the switch is being used as a traditional Layer 2 device, then the value of this object should be same as wwpLeosMcastVlanId.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

wwpLeosMcastFilterStatsTable 1.3.6.1.4.1.6141.2.60.7.1.3.1
The (conceptual) table listing the multicast statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMcastFilterStatsEntry

wwpLeosMcastFilterStatsEntry 1.3.6.1.4.1.6141.2.60.7.1.3.1.1
An entry (conceptual row) in the wwpLeosMcastFilterServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMcastFilterStatsEntry  

wwpLeosMcastStaticGrpCount 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.1
The total number of static multicast groups.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

wwpLeosMcastDynamicGrpCount 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.2
The total number of dynamic mcast groups.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

wwpLeosMcastJoinMessages 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.3
The total number of join messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastLeaveMessages 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.4
The total number of leave messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastQueryMessages 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.5
The total number of queries received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastQueryDiscards 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.6
The total number of queries discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastQueryTimeouts 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.7
The total number of timeouts waiting for the router to send query.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastUnknownPktType 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.8
The total number of unknown (unknown type ) IGMP packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastRouterDiscards 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.9
The total number of messages discarded by the router. This happens when join comes in from a router port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastHostDiscards 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.10
The total number of messages discarded by the host. This happens when a join/leave comes in a port, but no router port is established.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastBadChecksum 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.11
The total number of packets received with bad IP checksum.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastL2L3Mismatch 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.12
The total number of IGMP Layer2 / Layer 3 mismatch packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastTotalMembers 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.13
The total number of group members for all groups in the given VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastLingerCount 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.14
The total number of groups in linger state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastRouterSrcMacAddr 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.15
Specifies the router's MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wwpLeosMcastRouterSrcIpAddr 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.16
Specifies the router's IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wwpLeosMcastRouterPortId 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.17
Specifies the port from where router queries are coming.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

wwpLeosMcastReportSendPortId 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.18
The new value is the port number of the port where IGMP reports will be sent. Not always the same as the router port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

wwpLeosMcastStatsClear 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.19
Setting this object to clear will clear the statistics for only the associated VlanId. We cannot set this object to none, it is for display purpose only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), none(2)  

wwpLeosMcastStatsQuerySrcIpZeroDiscard 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.20
Specifies the number of Queries discarded with Zero source IP in them
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wwpLeosMcastFilterConfigTable 1.3.6.1.4.1.6141.2.60.7.1.1.6
The (conceptual) table listing the vlans on which the UPF can be applied.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMcastFilterConfigEntry

wwpLeosMcastFilterConfigEntry 1.3.6.1.4.1.6141.2.60.7.1.1.6.1
An entry (conceptual row) in the wwpLeosMcastFilterConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMcastFilterConfigEntry  

wwpLeosMcastFilterUPFActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.1
UPF can be enabled on this VLAN by setting this object to 'true'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

wwpLeosMcastUnresolvedAction 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.2
Setting this object to 'flood' will cause the device to flood all the unresolved messages to all the ports in the VLAN. Setting this object to 'drop' will cause the device to drop all the unresolved messages. If an IGMP join is received with a matching multicast group address, the multicast stream will forward to the corresponding port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flood(1), drop(2)  

wwpLeosMcastFilterWKMFLocalActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.3
Setting the object to flood will enable flooding of local WKMF on a VLAN. Setting the object to drop will enable dropping of local WKMF on a VLAN. Multicast address belonging to this object is 224.0.0.x.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flood(1), drop(2)  

wwpLeosMcastFilterWKMFInternetActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.4
Setting the object to flood will enable flooding of internet WKMF on a VLAN. Setting the object to drop will enable dropping of internet WKMF on a VLAN. Multicast address belonging to this object is 224.0.1.x.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flood(1), drop(2)  

wwpLeosMcastFilterWKMFAdhocActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.5
Setting the object to flood will enable flooding of adhoc WKMF on a VLAN. Setting the object to drop will enable dropping of adhoc WKMF on a VLAN. Multicast address belonging to this object is 224.0.2.x to 224.0.255.x.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flood(1), drop(2)  

wwpLeosMcastFilterWKMFStMulticastActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.6
Setting the object to flood will enable flooding of st-multicast WKMF on a VLAN. Setting the object to drop will enable dropping of st-multicast WKMF on a VLAN. Multicast address belonging to this object is 224.1.x.x.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flood(1), drop(2)  

wwpLeosMcastFilterWKMFSdpSapActivate 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.7
Setting the object to flood will enable flooding of sdp-sap WKMF on a VLAN. Setting the object to drop will enable dropping of sdp-sap WKMF on a VLAN. Multicast address belonging to this object is 224.2.x.x.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flood(1), drop(2)  

wwpLeosMcastChannelStreamExPortMemTable 1.3.6.1.4.1.6141.2.60.7.1.1.7
The (conceptual) table listing the excluded port list per VLAN for channel stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WwpLeosMcastChannelStreamExPortMemEntry

wwpLeosMcastChannelStreamExPortMemEntry 1.3.6.1.4.1.6141.2.60.7.1.1.7.1
An entry (conceptual row) in the wwpLeosMcastChannelStreamExPortMemTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  WwpLeosMcastChannelStreamExPortMemEntry  

wwpLeosMcastChannelStreamExPortId 1.3.6.1.4.1.6141.2.60.7.1.1.7.1.1
The port num to be excluded from channel stream.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

wwpLeosMcastChannelStreamExPortMemStatus 1.3.6.1.4.1.6141.2.60.7.1.1.7.1.2
Setting this object to createAndGo will add wwpLeosMcastVlanId and wwpLeosMcastChannelStreamExPortId in the excluded port list of channel stream. Setting this to destroy will remove the wwpLeosMcastVlanId, wwpLeosMcastChannelStreamExPortId membership from excluded port list.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

wwpLeosMcastAddrOverlapNotification 1.3.6.1.4.1.6141.2.60.7.2.0.1
A wwpLeosMcastAddrOverlapNotification is sent whenever several multicast IP addresses overlap (matches the same L2 address).
Status: current Access: read-create
NOTIFICATION-TYPE