WebGraph-8xThermometer-US-MIB

File: WebGraph-8xThermometer-US-MIB.mib (72382 bytes)

Imported modules

RFC-1212	RFC-1215	RFC1213-MIB
RFC1155-SMI

Imported symbols

OBJECT-TYPE	TRAP-TYPE	DisplayString
PhysAddress	enterprises	TimeTicks
IpAddress	NetworkAddress

Defined Types

WtWebioAn8GraphSensorEntry
SEQUENCE
	wtWebioAn8GraphSensorNo	INTEGER

WtWebioAn8GraphTempValueEntry
SEQUENCE
	wtWebioAn8GraphTempValue	OCTET STRING

WtWebioAn8GraphBinaryTempValueEntry
SEQUENCE
	wtWebioAn8GraphBinaryTempValue	INTEGER

WtWebioAn8GraphTempValuePktEntry
SEQUENCE
	wtWebioAn8GraphTempValuePkt	OCTET STRING

WtWebioAn8GraphSensorColorEntry
SEQUENCE
	wtWebioAn8GraphSensorColor	OCTET STRING

WtWebioAn8GraphAlarmIfEntry
SEQUENCE
	wtWebioAn8GraphAlarmNo	INTEGER

WtWebioAn8GraphAlarmEntry
SEQUENCE
	wtWebioAn8GraphAlarmTrigger	OCTET STRING
	wtWebioAn8GraphAlarmMin	OCTET STRING
	wtWebioAn8GraphAlarmMax	OCTET STRING
	wtWebioAn8GraphAlarmHysteresis	OCTET STRING
	wtWebioAn8GraphAlarmDelay	OCTET STRING
	wtWebioAn8GraphAlarmInterval	OCTET STRING
	wtWebioAn8GraphAlarmEnable	OCTET STRING
	wtWebioAn8GraphAlarmEMailAddr	OCTET STRING
	wtWebioAn8GraphAlarmMailSubject	OCTET STRING
	wtWebioAn8GraphAlarmMailText	OCTET STRING
	wtWebioAn8GraphAlarmManagerIP	OCTET STRING
	wtWebioAn8GraphAlarmTrapText	OCTET STRING
	wtWebioAn8GraphAlarmMailOptions	OCTET STRING
	wtWebioAn8GraphAlarmTcpIpAddr	OCTET STRING
	wtWebioAn8GraphAlarmTcpPort	INTEGER
	wtWebioAn8GraphAlarmTcpText	OCTET STRING
	wtWebioAn8GraphAlarmClearMailSubject	OCTET STRING
	wtWebioAn8GraphAlarmClearMailText	OCTET STRING
	wtWebioAn8GraphAlarmClearTrapText	OCTET STRING
	wtWebioAn8GraphAlarmClearTcpText	OCTET STRING
	wtWebioAn8GraphAlarmSyslogIpAddr	OCTET STRING
	wtWebioAn8GraphAlarmSyslogPort	INTEGER
	wtWebioAn8GraphAlarmSyslogText	OCTET STRING
	wtWebioAn8GraphAlarmFtpDataPort	OCTET STRING
	wtWebioAn8GraphAlarmFtpFileName	OCTET STRING
	wtWebioAn8GraphAlarmFtpText	OCTET STRING
	wtWebioAn8GraphAlarmFtpClearText	OCTET STRING
	wtWebioAn8GraphAlarmFtpOption	OCTET STRING
	wtWebioAn8GraphAlarmTimerCron	OCTET STRING

WtWebioAn8GraphSensorColorEntry
SEQUENCE
	wtWebioAn8GraphGraphicsSensorColor	OCTET STRING
	wtWebioAn8GraphGraphicsSelectScale	OCTET STRING

WtWebioAn8GraphPortEntry
SEQUENCE
	wtWebioAn8GraphPortName	OCTET STRING
	wtWebioAn8GraphPortText	OCTET STRING
	wtWebioAn8GraphPortOffset1	OCTET STRING
	wtWebioAn8GraphPortTemperature1	OCTET STRING
	wtWebioAn8GraphPortOffset2	OCTET STRING
	wtWebioAn8GraphPortTemperature2	OCTET STRING
	wtWebioAn8GraphPortComment	OCTET STRING
	wtWebioAn8GraphPortSensorSelect	OCTET STRING

Defined Values

wut		1.3.6.1.4.1.5040
OBJECT IDENTIFIER

wtComServer		1.3.6.1.4.1.5040.1
OBJECT IDENTIFIER

wtWebio		1.3.6.1.4.1.5040.1.2
OBJECT IDENTIFIER

wtWebioAn8Graph		1.3.6.1.4.1.5040.1.2.6
OBJECT IDENTIFIER

wtWebioAn8GraphTemp		1.3.6.1.4.1.5040.1.2.6.1
OBJECT IDENTIFIER

wtWebioAn8GraphSessCntrl		1.3.6.1.4.1.5040.1.2.6.2
OBJECT IDENTIFIER

wtWebioAn8GraphConfig		1.3.6.1.4.1.5040.1.2.6.3
OBJECT IDENTIFIER

wtWebioAn8GraphDiag		1.3.6.1.4.1.5040.1.2.6.4
OBJECT IDENTIFIER

wtWebioAn8GraphDevice		1.3.6.1.4.1.5040.1.2.6.3.1
OBJECT IDENTIFIER

wtWebioAn8GraphPorts		1.3.6.1.4.1.5040.1.2.6.3.2
OBJECT IDENTIFIER

wtWebioAn8GraphManufact		1.3.6.1.4.1.5040.1.2.6.3.3
OBJECT IDENTIFIER

wtWebioAn8GraphText		1.3.6.1.4.1.5040.1.2.6.3.1.1
OBJECT IDENTIFIER

wtWebioAn8GraphTimeDate		1.3.6.1.4.1.5040.1.2.6.3.1.2
OBJECT IDENTIFIER

wtWebioAn8GraphBasic		1.3.6.1.4.1.5040.1.2.6.3.1.3
OBJECT IDENTIFIER

wtWebioAn8GraphDatalogger		1.3.6.1.4.1.5040.1.2.6.3.1.4
OBJECT IDENTIFIER

wtWebioAn8GraphAlarm		1.3.6.1.4.1.5040.1.2.6.3.1.5
OBJECT IDENTIFIER

wtWebioAn8GraphGraphics		1.3.6.1.4.1.5040.1.2.6.3.1.6
OBJECT IDENTIFIER

wtWebioAn8GraphTimeZone		1.3.6.1.4.1.5040.1.2.6.3.1.2.1
OBJECT IDENTIFIER

wtWebioAn8GraphTimeServer		1.3.6.1.4.1.5040.1.2.6.3.1.2.2
OBJECT IDENTIFIER

wtWebioAn8GraphDeviceClock		1.3.6.1.4.1.5040.1.2.6.3.1.2.3
OBJECT IDENTIFIER

wtWebioAn8GraphNetwork		1.3.6.1.4.1.5040.1.2.6.3.1.3.1
OBJECT IDENTIFIER

wtWebioAn8GraphHTTP		1.3.6.1.4.1.5040.1.2.6.3.1.3.2
OBJECT IDENTIFIER

wtWebioAn8GraphMail		1.3.6.1.4.1.5040.1.2.6.3.1.3.3
OBJECT IDENTIFIER

wtWebioAn8GraphSNMP		1.3.6.1.4.1.5040.1.2.6.3.1.3.4
OBJECT IDENTIFIER

wtWebioAn8GraphUDP		1.3.6.1.4.1.5040.1.2.6.3.1.3.5
OBJECT IDENTIFIER

wtWebioAn8GraphSyslog		1.3.6.1.4.1.5040.1.2.6.3.1.3.6
OBJECT IDENTIFIER

wtWebioAn8GraphFTP		1.3.6.1.4.1.5040.1.2.6.3.1.3.7
OBJECT IDENTIFIER

wtWebioAn8GraphGraphicsBase		1.3.6.1.4.1.5040.1.2.6.3.1.6.1
OBJECT IDENTIFIER

wtWebioAn8GraphGraphicsSelect		1.3.6.1.4.1.5040.1.2.6.3.1.6.2
OBJECT IDENTIFIER

wtWebioAn8GraphGraphicsScale		1.3.6.1.4.1.5040.1.2.6.3.1.6.3
OBJECT IDENTIFIER

wtWebioAn8GraphSensors		1.3.6.1.4.1.5040.1.2.6.1.1
Number of temperature sensors
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebioAn8GraphSensorTable		1.3.6.1.4.1.5040.1.2.6.1.2
List of sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn8GraphSensorEntry

wtWebioAn8GraphSensorEntry		1.3.6.1.4.1.5040.1.2.6.1.2.1
Temperature sensor numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn8GraphSensorEntry

wtWebioAn8GraphSensorNo		1.3.6.1.4.1.5040.1.2.6.1.2.1.1
Temperature sensor number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebioAn8GraphTempValueTable		1.3.6.1.4.1.5040.1.2.6.1.3
List of temperature values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn8GraphTempValueEntry

wtWebioAn8GraphTempValueEntry		1.3.6.1.4.1.5040.1.2.6.1.3.1
Temperatures of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn8GraphTempValueEntry

wtWebioAn8GraphTempValue		1.3.6.1.4.1.5040.1.2.6.1.3.1.1
Temperature value of the sensor, ASCII, 5 characters in length.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(5)

wtWebioAn8GraphBinaryTempValueTable		1.3.6.1.4.1.5040.1.2.6.1.4
List of binary temperature values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn8GraphBinaryTempValueEntry

wtWebioAn8GraphBinaryTempValueEntry		1.3.6.1.4.1.5040.1.2.6.1.4.1
Binary temperature values of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn8GraphBinaryTempValueEntry

wtWebioAn8GraphBinaryTempValue		1.3.6.1.4.1.5040.1.2.6.1.4.1.1
Binary temperature value of the sensor in 1/10 degrees Celsius, signed number, 0x4FFF6 indicates an invalid measured value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphTempValuePktTable		1.3.6.1.4.1.5040.1.2.6.1.8
List of temperature values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn8GraphTempValuePktEntry

wtWebioAn8GraphTempValuePktEntry		1.3.6.1.4.1.5040.1.2.6.1.8.1
Temperatures of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn8GraphTempValuePktEntry

wtWebioAn8GraphTempValuePkt		1.3.6.1.4.1.5040.1.2.6.1.8.1.1
Temperature value of the sensor, ASCII, 5 characters in length, decimal point.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(5)

wtWebioAn8GraphSessCntrlPassword		1.3.6.1.4.1.5040.1.2.6.2.1
Entering this password opens a session which is ended by writing a 1 to wtWebioAn8GraphSessCntrlLogout. When read this variable provides a string of length zero.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphSessCntrlConfigMode		1.3.6.1.4.1.5040.1.2.6.2.2
When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphSessCntrl-NoSession(0), wtWebioAn8GraphSessCntrl-Session(1)

wtWebioAn8GraphSessCntrlLogout		1.3.6.1.4.1.5040.1.2.6.2.3
If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphSessCntrlAdminPassword		1.3.6.1.4.1.5040.1.2.6.2.4
This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphSessCntrlConfigPassword		1.3.6.1.4.1.5040.1.2.6.2.5
This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphDeviceName		1.3.6.1.4.1.5040.1.2.6.3.1.1.1
Name of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphDeviceText		1.3.6.1.4.1.5040.1.2.6.3.1.1.2
Description of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphDeviceLocation		1.3.6.1.4.1.5040.1.2.6.3.1.1.3
Description of the location of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphDeviceContact		1.3.6.1.4.1.5040.1.2.6.3.1.1.4
Contact address of the system operator of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphTzOffsetHrs		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.1
Offset hours for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphTzOffsetMin		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.2
Offset minutes for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphTzEnable		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphStTzOffsetHrs		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.4
Offset hours of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphStTzOffsetMin		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.5
Offset minutes of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphStTzEnable		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.6
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphStTzStartMonth		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.7
Month in which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphStartMonth-January(1), wtWebioAn8GraphStartMonth-February(2), wtWebioAn8GraphStartMonth-March(3), wtWebioAn8GraphStartMonth-April(4), wtWebioAn8GraphStartMonth-May(5), wtWebioAn8GraphStartMonth-June(6), wtWebioAn8GraphStartMonth-July(7), wtWebioAn8GraphStartMonth-August(8), wtWebioAn8GraphStartMonth-September(9), wtWebioAn8GraphStartMonth-October(10), wtWebioAn8GraphStartMonth-November(11), wtWebioAn8GraphStartMonth-December(12)

wtWebioAn8GraphStTzStartMode		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.8
Mode of the day of the week for which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphStartMode-first(1), wtWebioAn8GraphStartMode-second(2), wtWebioAn8GraphStartMode-third(3), wtWebioAn8GraphStartMode-fourth(4), wtWebioAn8GraphStartMode-last(5)

wtWebioAn8GraphStTzStartWday		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.9
Day of the week on which the change is made from winter time to summer time
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphStartWday-Sunday(1), wtWebioAn8GraphStartWday-Monday(2), wtWebioAn8GraphStartWday-Tuesday(3), wtWebioAn8GraphStartWday-Thursday(4), wtWebioAn8GraphStartWday-Wednesday(5), wtWebioAn8GraphStartWday-Friday(6), wtWebioAn8GraphStartWday-Saturday(7)

wtWebioAn8GraphStTzStartHrs		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.10
Hour in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphStTzStartMin		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.11
Minute in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphStTzStopMonth		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.12
Month in which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphStopMonth-January(1), wtWebioAn8GraphStopMonth-February(2), wtWebioAn8GraphStopMonth-March(3), wtWebioAn8GraphStopMonth-April(4), wtWebioAn8GraphStopMonth-May(5), wtWebioAn8GraphStopMonth-June(6), wtWebioAn8GraphStopMonth-July(7), wtWebioAn8GraphStopMonth-August(8), wtWebioAn8GraphStopMonth-September(9), wtWebioAn8GraphStopMonth-October(10), wtWebioAn8GraphStopMonth-November(11), wtWebioAn8GraphStopMonth-December(12)

wtWebioAn8GraphStTzStopMode		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.13
Mode of the week day on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphStopMode-first(1), wtWebioAn8GraphStopMode-second(2), wtWebioAn8GraphStopMode-third(3), wtWebioAn8GraphStopMode-fourth(4), wtWebioAn8GraphStopMode-last(5)

wtWebioAn8GraphStTzStopWday		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.14
Day of the week on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphStopWday-Sunday(1), wtWebioAn8GraphStopWday-Monday(2), wtWebioAn8GraphStopWday-Tuesday(3), wtWebioAn8GraphStopWday-Thursday(4), wtWebioAn8GraphStopWday-Wednesday(5), wtWebioAn8GraphStopWday-Friday(6), wtWebioAn8GraphStopWday-Saturday(7)

wtWebioAn8GraphStTzStopHrs		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.15
Hour at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphStTzStopMin		1.3.6.1.4.1.5040.1.2.6.3.1.2.1.16
Minute at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphTimeServer1		1.3.6.1.4.1.5040.1.2.6.3.1.2.2.1
IP address or name of the 1st time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphTimeServer2		1.3.6.1.4.1.5040.1.2.6.3.1.2.2.2
IP address or name of the 2nd time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphTsEnable		1.3.6.1.4.1.5040.1.2.6.3.1.2.2.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphTsSyncTime		1.3.6.1.4.1.5040.1.2.6.3.1.2.2.4
Daily synchronisation time with the time server (hour: 0-23).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphClockHrs		1.3.6.1.4.1.5040.1.2.6.3.1.2.3.1
Clock hours taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..23

wtWebioAn8GraphClockMin		1.3.6.1.4.1.5040.1.2.6.3.1.2.3.2
Clock minutes taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..59

wtWebioAn8GraphClockDay		1.3.6.1.4.1.5040.1.2.6.3.1.2.3.3
Date: Day of the month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..31

wtWebioAn8GraphClockMonth		1.3.6.1.4.1.5040.1.2.6.3.1.2.3.4
Date: Month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphClockMonth-January(1), wtWebioAn8GraphClockMonth-February(2), wtWebioAn8GraphClockMonth-March(3), wtWebioAn8GraphClockMonth-April(4), wtWebioAn8GraphClockMonth-May(5), wtWebioAn8GraphClockMonth-June(6), wtWebioAn8GraphClockMonth-July(7), wtWebioAn8GraphClockMonth-August(8), wtWebioAn8GraphClockMonth-September(9), wtWebioAn8GraphClockMonth-October(10), wtWebioAn8GraphClockMonth-November(11), wtWebioAn8GraphClockMonth-December(12)

wtWebioAn8GraphClockYear		1.3.6.1.4.1.5040.1.2.6.3.1.2.3.5
Date: Year, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

wtWebioAn8GraphIpAddress		1.3.6.1.4.1.5040.1.2.6.3.1.3.1.1
IP address of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebioAn8GraphSubnetMask		1.3.6.1.4.1.5040.1.2.6.3.1.3.1.2
Subnet mask of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebioAn8GraphGateway		1.3.6.1.4.1.5040.1.2.6.3.1.3.1.3
Gateway of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebioAn8GraphDnsServer1		1.3.6.1.4.1.5040.1.2.6.3.1.3.1.4
IP address of the 1st DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphDnsServer2		1.3.6.1.4.1.5040.1.2.6.3.1.3.1.5
IP address of the 2nd DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAddConfig		1.3.6.1.4.1.5040.1.2.6.3.1.3.1.6
Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: BOOTP disable Bit 1: DHCP disable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphStartup		1.3.6.1.4.1.5040.1.2.6.3.1.3.2.1
Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphGetHeaderEnable		1.3.6.1.4.1.5040.1.2.6.3.1.3.2.2
If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphHttpPort		1.3.6.1.4.1.5040.1.2.6.3.1.3.2.3
Definition of the standard HTML port (Default: 80).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebioAn8GraphMailAdName		1.3.6.1.4.1.5040.1.2.6.3.1.3.3.1
Device name for mail administration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMailReply		1.3.6.1.4.1.5040.1.2.6.3.1.3.3.2
Reply address for the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMailServer		1.3.6.1.4.1.5040.1.2.6.3.1.3.3.3
Name or IP address of the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1MailEnable		1.3.6.1.4.1.5040.1.2.6.3.1.3.3.4
Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMailAuthentication		1.3.6.1.4.1.5040.1.2.6.3.1.3.3.5
Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphMailAuthUser		1.3.6.1.4.1.5040.1.2.6.3.1.3.3.6
Name of the user to be authenticated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMailAuthPassword		1.3.6.1.4.1.5040.1.2.6.3.1.3.3.7
Authentication password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMailPop3Server		1.3.6.1.4.1.5040.1.2.6.3.1.3.3.8
Name or Ip-address of the POP3 Servers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphSnmpCommunityStringRead		1.3.6.1.4.1.5040.1.2.6.3.1.3.4.1
Community string read only
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphSnmpCommunityStringReadWrite		1.3.6.1.4.1.5040.1.2.6.3.1.3.4.2
Community string read / write
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphSystemTrapManagerIP		1.3.6.1.4.1.5040.1.2.6.3.1.3.4.3
Name or IP address of the TCP server which accepts the system trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphSystemTrapEnable		1.3.6.1.4.1.5040.1.2.6.3.1.3.4.4
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphSnmpEnable		1.3.6.1.4.1.5040.1.2.6.3.1.3.4.5
Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphSnmpCommunityStringTrap		1.3.6.1.4.1.5040.1.2.6.3.1.3.4.6
Community string send within traps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphUdpPort		1.3.6.1.4.1.5040.1.2.6.3.1.3.5.1
Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebioAn8GraphUdpEnable		1.3.6.1.4.1.5040.1.2.6.3.1.3.5.2
Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphSyslogServerIP		1.3.6.1.4.1.5040.1.2.6.3.1.3.6.1
Name or IP address of the Syslog server, which accepts the Syslog messgaes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphSyslogServerPort		1.3.6.1.4.1.5040.1.2.6.3.1.3.6.2
Portnumber of the Syslog servers, default 514.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphSyslogSystemMessagesEnable		1.3.6.1.4.1.5040.1.2.6.3.1.3.6.3
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphSyslogEnable		1.3.6.1.4.1.5040.1.2.6.3.1.3.6.4
Set bit 0 to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphFTPServerIP		1.3.6.1.4.1.5040.1.2.6.3.1.3.7.1
Name or IP address of the FTP server, which accepts the FTP messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphFTPServerControlPort		1.3.6.1.4.1.5040.1.2.6.3.1.3.7.2
Portnumber of the control port of the FTP server, default 21.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphFTPUserName		1.3.6.1.4.1.5040.1.2.6.3.1.3.7.3
FTP Loggin: user name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphFTPPassword		1.3.6.1.4.1.5040.1.2.6.3.1.3.7.4
FTP Loggin: user password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphFTPAccount		1.3.6.1.4.1.5040.1.2.6.3.1.3.7.5
FTP Loggin: name of account.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphFTPOption		1.3.6.1.4.1.5040.1.2.6.3.1.3.7.6
Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphFTPEnable		1.3.6.1.4.1.5040.1.2.6.3.1.3.7.7
Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphLoggerTimebase		1.3.6.1.4.1.5040.1.2.6.3.1.4.1
Time base of the data logger
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphDatalogger-1Min(1), wtWebioAn8GraphDatalogger-5Min(2), wtWebioAn8GraphDatalogger-15Min(3), wtWebioAn8GraphDatalogger-60Min(4)

wtWebioAn8GraphLoggerSensorSel		1.3.6.1.4.1.5040.1.2.6.3.1.4.2
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphDisplaySensorSel		1.3.6.1.4.1.5040.1.2.6.3.1.4.3
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphSensorColorTable		1.3.6.1.4.1.5040.1.2.6.3.1.4.4
List of sensor colors for the praphical presentation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn8GraphSensorColorEntry

wtWebioAn8GraphSensorColorEntry		1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1
Index numbers of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn8GraphSensorColorEntry

wtWebioAn8GraphSensorColor		1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1.1
Color of the sensors at the praphical presention.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebioAn8GraphAutoScaleEnable		1.3.6.1.4.1.5040.1.2.6.3.1.4.5
If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphVerticalUpperLimit		1.3.6.1.4.1.5040.1.2.6.3.1.4.6
This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphVerticalLowerLimit		1.3.6.1.4.1.5040.1.2.6.3.1.4.7
This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphHorizontalZoom		1.3.6.1.4.1.5040.1.2.6.3.1.4.8
Defines the default zoom stage, if no auto scaling is selected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn8GraphZoom-25min(1), wtWebioAn8GraphZoom-75min(2), wtWebioAn8GraphZoom-5hrs(3), wtWebioAn8GraphZoom-30hrs(4), wtWebioAn8GraphZoom-5days(5), wtWebioAn8GraphZoom-25days(6)

wtWebioAn8GraphAlarmCount		1.3.6.1.4.1.5040.1.2.6.3.1.5.1
Number of independent alarms.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebioAn8GraphAlarmIfTable		1.3.6.1.4.1.5040.1.2.6.3.1.5.2
List of alarm indices.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn8GraphAlarmIfEntry

wtWebioAn8GraphAlarmIfEntry		1.3.6.1.4.1.5040.1.2.6.3.1.5.2.1
Numbers of the alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn8GraphAlarmIfEntry

wtWebioAn8GraphAlarmNo		1.3.6.1.4.1.5040.1.2.6.3.1.5.2.1.1
Alarm number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebioAn8GraphAlarmTable		1.3.6.1.4.1.5040.1.2.6.3.1.5.3
List of settings depending on the alarm number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn8GraphAlarmEntry

wtWebioAn8GraphAlarmEntry		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1
Alarm parameters of the individual alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn8GraphAlarmEntry

wtWebioAn8GraphAlarmTrigger		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.1
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphAlarmMin		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.2
Minimum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmMax		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.3
Maximum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmHysteresis		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.4
Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmDelay		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.5
Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmInterval		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.6
Send interval for alarm messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmEnable		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.7
Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphAlarmEMailAddr		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.8
E-Mail address for sending the alarm mail to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmMailSubject		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.9
Subject line for alarm mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmMailText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.10
Alarm mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmManagerIP		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.11
Name or IP address of the SNMP Manager which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmTrapText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.12
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmMailOptions		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.13
Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphAlarmTcpIpAddr		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.14
Name or IP address of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmTcpPort		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.15
Port number of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebioAn8GraphAlarmTcpText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.16
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmClearMailSubject		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.17
Subject line for alarm clear mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmClearMailText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.18
Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmClearTrapText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.19
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmClearTcpText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.20
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmSyslogIpAddr		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.21
IP address of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebioAn8GraphAlarmSyslogPort		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.22
Port number of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebioAn8GraphAlarmSyslogText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.23
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmSyslogClearText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.24
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmFtpDataPort		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.25
Local data port: 1..65535 or AUTO: the next free port will be assigned.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmFtpFileName		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.26
Name of the file including path informations.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmFtpText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.27
Message text to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmFtpClearText		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.28
Alarm clear message to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphAlarmFtpOptions		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.29
Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphAlarmTimerCron		1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.30
This entry contains 5 text fields space or tab seperated for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphGraphicsBaseEnable		1.3.6.1.4.1.5040.1.2.6.3.1.6.1.1
Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphGraphicsBaseWidth		1.3.6.1.4.1.5040.1.2.6.3.1.6.1.2
Defines the width of the graphic in pixels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsBaseHeight		1.3.6.1.4.1.5040.1.2.6.3.1.6.1.3
Defines the height of the graphic in pixels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsBaseFrameColor		1.3.6.1.4.1.5040.1.2.6.3.1.6.1.4
Frame color definition in RGB.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebioAn8GraphGraphicsBaseBackgroundColor		1.3.6.1.4.1.5040.1.2.6.3.1.6.1.5
Background color definition in RGB.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebioAn8GraphGraphicsBasePollingrate		1.3.6.1.4.1.5040.1.2.6.3.1.6.1.6
Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsSelectDisplaySensorSel		1.3.6.1.4.1.5040.1.2.6.3.1.6.2.1
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphGraphicsSelectDisplayShowExtrem		1.3.6.1.4.1.5040.1.2.6.3.1.6.2.2
Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphSensorColorTable		1.3.6.1.4.1.5040.1.2.6.3.1.6.2.3
List of sensor colors for the praphical presentation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn8GraphSensorColorEntry

wtWebioAn8GraphSensorColorEntry		1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1
Numbers of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn8GraphSensorColorEntry

wtWebioAn8GraphGraphicsSensorColor		1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1.1
Color of the sensors at the praphical presention.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebioAn8GraphGraphicsSelectScale		1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1.2
Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3 : Use Scale 4 Bit 4-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphGraphicsScaleAutoScaleEnable		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.1
Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 : Scale 3 Auto scale enable Bit 3 : Scale 4 Auto scale enable Bit 4-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphGraphicsScaleAutoFitEnable		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.2
Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Scale 3 Auto fit enable Bit 3 : Scale 4 Auto fit enable Bit 4-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphGraphicsScale1Min		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.3
Scale 1: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsScale2Min		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.4
Scale 2: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsScale3Min		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.5
Scale 3: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsScale4Min		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.6
Scale 4: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsScale1Max		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.7
Scale 1: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsScale2Max		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.8
Scale 2: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsScale3Max		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.9
Scale 3: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsScale4Max		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.10
Scale 4: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphGraphicsScale1Unit		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.11
Scale 1: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphGraphicsScale2Unit		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.12
Scale 2: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphGraphicsScale3Unit		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.13
Scale 3: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphGraphicsScale4Unit		1.3.6.1.4.1.5040.1.2.6.3.1.6.3.14
Scale 4: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphPortTable		1.3.6.1.4.1.5040.1.2.6.3.2.1
List of settings depending on the sensor number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn8GraphPortEntry

wtWebioAn8GraphPortEntry		1.3.6.1.4.1.5040.1.2.6.3.2.1.1
Sensor parameters for the individual sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn8GraphPortEntry

wtWebioAn8GraphPortName		1.3.6.1.4.1.5040.1.2.6.3.2.1.1.1
Name of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphPortText		1.3.6.1.4.1.5040.1.2.6.3.2.1.1.2
Description of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphPortOffset1		1.3.6.1.4.1.5040.1.2.6.3.2.1.1.3
Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphPortTemperature1		1.3.6.1.4.1.5040.1.2.6.3.2.1.1.4
Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphPortOffset2		1.3.6.1.4.1.5040.1.2.6.3.2.1.1.5
Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphPortTemperature2		1.3.6.1.4.1.5040.1.2.6.3.2.1.1.6
Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphPortComment		1.3.6.1.4.1.5040.1.2.6.3.2.1.1.7
Offset calibration: informations of date, name of operator, reference devices.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphPortSensorSelect		1.3.6.1.4.1.5040.1.2.6.3.2.1.1.8
Binar kodierte Optionen fur Sensor: Octet 1: ungenutzt Octet 2: ungenutzt Octet 3: ungenutzt Octet 4: Bit 0 : PT100 Bit 1 : PT1000 (default) Bit 2-7: ungenutzt
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn8GraphMfName		1.3.6.1.4.1.5040.1.2.6.3.3.1
Manufacturer company name
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMfAddr		1.3.6.1.4.1.5040.1.2.6.3.3.2
Manufacturer address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMfHotline		1.3.6.1.4.1.5040.1.2.6.3.3.3
Manufacturer hotline.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMfInternet		1.3.6.1.4.1.5040.1.2.6.3.3.4
Manufacturer Internet address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMfDeviceTyp		1.3.6.1.4.1.5040.1.2.6.3.3.5
Manufacturer device name (model number).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphMfOrderNo		1.3.6.1.4.1.5040.1.2.6.3.3.6
Manufacturer part number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphDiagErrorCount		1.3.6.1.4.1.5040.1.2.6.4.1
Number of entries in the error memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphDiagBinaryError		1.3.6.1.4.1.5040.1.2.6.4.2
Error causes coded bit-by-bit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphDiagErrorIndex		1.3.6.1.4.1.5040.1.2.6.4.3
The value of this variable is used as an index to read an error massege from wtWebioAn8GraphDiagErrorMessage. Errors are numbered from 1 to wtWebioAn8GraphDiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebioAn8GraphDiagErrorMessage.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphDiagErrorMessage		1.3.6.1.4.1.5040.1.2.6.4.4
Using wtWebioAn8GraphDiagErrorIndex as an index, the appropriate message is available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebioAn8GraphDiagErrorClear		1.3.6.1.4.1.5040.1.2.6.4.5
Writing 1 into this variable clears all diagnosis messages.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER

wtWebioAn8GraphAlert1		11
This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert2		12
This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert3		13
This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert4		14
This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert5		15
This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert6		16
This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert7		17
This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert8		18
This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert9		71
This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert10		72
This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert11		73
This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert12		74
This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert13		75
This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert14		76
This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert15		77
This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlert16		78
This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn8GraphAlertDiag		110
This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE