WebGraph-Thermo-Hygrometer-US-MIB

File: WebGraph-Thermo-Hygrometer-US-MIB.mib (73008 bytes)

Imported modules

RFC-1212	RFC-1215	RFC1213-MIB
RFC1155-SMI

Imported symbols

OBJECT-TYPE	TRAP-TYPE	DisplayString
PhysAddress	enterprises	TimeTicks
IpAddress	NetworkAddress

Defined Types

WtWebGraphThermHygroSensorEntry
SEQUENCE
	wtWebGraphThermHygroSensorNo	INTEGER

WtWebGraphThermHygroTempValueEntry
SEQUENCE
	wtWebGraphThermHygroTempValue	OCTET STRING

WtWebGraphThermHygroBinaryTempValueEntry
SEQUENCE
	wtWebGraphThermHygroBinaryTempValue	INTEGER

WtWebGraphThermHygroSensorColorEntry
SEQUENCE
	wtWebGraphThermHygroSensorColor	OCTET STRING

WtWebGraphThermHygroAlarmIfEntry
SEQUENCE
	wtWebGraphThermHygroAlarmNo	INTEGER

WtWebGraphThermHygroAlarmEntry
SEQUENCE
	wtWebGraphThermHygroAlarmTrigger	OCTET STRING
	wtWebGraphThermHygroAlarmMin	OCTET STRING
	wtWebGraphThermHygroAlarmMax	OCTET STRING
	wtWebGraphThermHygroAlarmHysteresis	OCTET STRING
	wtWebGraphThermHygroAlarmDelay	OCTET STRING
	wtWebGraphThermHygroAlarmInterval	OCTET STRING
	wtWebGraphThermHygroAlarmEnable	OCTET STRING
	wtWebGraphThermHygroAlarmEMailAddr	OCTET STRING
	wtWebGraphThermHygroAlarmMailSubject	OCTET STRING
	wtWebGraphThermHygroAlarmMailText	OCTET STRING
	wtWebGraphThermHygroAlarmManagerIP	OCTET STRING
	wtWebGraphThermHygroAlarmTrapText	OCTET STRING
	wtWebGraphThermHygroAlarmMailOptions	OCTET STRING
	wtWebGraphThermHygroAlarmTcpIpAddr	OCTET STRING
	wtWebGraphThermHygroAlarmTcpPort	INTEGER
	wtWebGraphThermHygroAlarmTcpText	OCTET STRING
	wtWebGraphThermHygroAlarmClearMailSubject	OCTET STRING
	wtWebGraphThermHygroAlarmClearMailText	OCTET STRING
	wtWebGraphThermHygroAlarmClearTrapText	OCTET STRING
	wtWebGraphThermHygroAlarmClearTcpText	OCTET STRING
	wtWebGraphThermHygroAlarmDeltaTemp	OCTET STRING
	wtWebGraphThermHygroAlarmRHMin	OCTET STRING
	wtWebGraphThermHygroAlarmRHMax	OCTET STRING
	wtWebGraphThermHygroAlarmRHHysteresis	OCTET STRING
	wtWebGraphThermHygroAlarmAHMin	OCTET STRING
	wtWebGraphThermHygroAlarmAHMax	OCTET STRING
	wtWebGraphThermHygroAlarmSyslogIpAddr	OCTET STRING
	wtWebGraphThermHygroAlarmSyslogPort	INTEGER
	wtWebGraphThermHygroAlarmSyslogText	OCTET STRING
	wtWebGraphThermHygroAlarmSyslogClearText	OCTET STRING
	wtWebGraphThermHygroAlarmFtpDataPort	OCTET STRING
	wtWebGraphThermHygroAlarmFtpFileName	OCTET STRING
	wtWebGraphThermHygroAlarmFtpText	OCTET STRING
	wtWebGraphThermHygroAlarmFtpClearText	OCTET STRING
	wtWebGraphThermHygroAlarmFtpOption	OCTET STRING
	wtWebGraphThermHygroAlarmTimerCron	OCTET STRING

WtWebGraphThermHygroPortEntry
SEQUENCE
	wtWebGraphThermHygroPortName	OCTET STRING
	wtWebGraphThermHygroPortText	OCTET STRING
	wtWebGraphThermHygroPortOffset1	OCTET STRING
	wtWebGraphThermHygroPortTemperature1	OCTET STRING
	wtWebGraphThermHygroPortOffset2	OCTET STRING
	wtWebGraphThermHygroPortTemperature2	OCTET STRING
	wtWebGraphThermHygroPortComment	OCTET STRING

Defined Values

wut		1.3.6.1.4.1.5040
OBJECT IDENTIFIER

wtComServer		1.3.6.1.4.1.5040.1
OBJECT IDENTIFIER

wtWebio		1.3.6.1.4.1.5040.1.2
OBJECT IDENTIFIER

wtWebGraphThermHygro		1.3.6.1.4.1.5040.1.2.9
OBJECT IDENTIFIER

wtWebGraphThermHygroTemp		1.3.6.1.4.1.5040.1.2.9.1
OBJECT IDENTIFIER

wtWebGraphThermHygroSessCntrl		1.3.6.1.4.1.5040.1.2.9.2
OBJECT IDENTIFIER

wtWebGraphThermHygroConfig		1.3.6.1.4.1.5040.1.2.9.3
OBJECT IDENTIFIER

wtWebGraphThermHygroDiag		1.3.6.1.4.1.5040.1.2.9.4
OBJECT IDENTIFIER

wtWebGraphThermHygroDevice		1.3.6.1.4.1.5040.1.2.9.3.1
OBJECT IDENTIFIER

wtWebGraphThermHygroPorts		1.3.6.1.4.1.5040.1.2.9.3.2
OBJECT IDENTIFIER

wtWebGraphThermHygroManufact		1.3.6.1.4.1.5040.1.2.9.3.3
OBJECT IDENTIFIER

wtWebGraphThermHygroText		1.3.6.1.4.1.5040.1.2.9.3.1.1
OBJECT IDENTIFIER

wtWebGraphThermHygroTimeDate		1.3.6.1.4.1.5040.1.2.9.3.1.2
OBJECT IDENTIFIER

wtWebGraphThermHygroBasic		1.3.6.1.4.1.5040.1.2.9.3.1.3
OBJECT IDENTIFIER

wtWebGraphThermHygroDatalogger		1.3.6.1.4.1.5040.1.2.9.3.1.4
OBJECT IDENTIFIER

wtWebGraphThermHygroAlarm		1.3.6.1.4.1.5040.1.2.9.3.1.5
OBJECT IDENTIFIER

wtWebGraphThermHygroTimeZone		1.3.6.1.4.1.5040.1.2.9.3.1.2.1
OBJECT IDENTIFIER

wtWebGraphThermHygroTimeServer		1.3.6.1.4.1.5040.1.2.9.3.1.2.2
OBJECT IDENTIFIER

wtWebGraphThermHygroDeviceClock		1.3.6.1.4.1.5040.1.2.9.3.1.2.3
OBJECT IDENTIFIER

wtWebGraphThermHygroNetwork		1.3.6.1.4.1.5040.1.2.9.3.1.3.1
OBJECT IDENTIFIER

wtWebGraphThermHygroHTTP		1.3.6.1.4.1.5040.1.2.9.3.1.3.2
OBJECT IDENTIFIER

wtWebGraphThermHygroMail		1.3.6.1.4.1.5040.1.2.9.3.1.3.3
OBJECT IDENTIFIER

wtWebGraphThermHygroSNMP		1.3.6.1.4.1.5040.1.2.9.3.1.3.4
OBJECT IDENTIFIER

wtWebGraphThermHygroUDP		1.3.6.1.4.1.5040.1.2.9.3.1.3.5
OBJECT IDENTIFIER

wtWebGraphThermHygroSyslog		1.3.6.1.4.1.5040.1.2.9.3.1.3.6
OBJECT IDENTIFIER

wtWebGraphThermHygroFTP		1.3.6.1.4.1.5040.1.2.9.3.1.3.7
OBJECT IDENTIFIER

wtWebGraphThermHygroSensors		1.3.6.1.4.1.5040.1.2.9.1.1
Number of sensors
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

wtWebGraphThermHygroSensorTable		1.3.6.1.4.1.5040.1.2.9.1.2
List of sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphThermHygroSensorEntry

wtWebGraphThermHygroSensorEntry		1.3.6.1.4.1.5040.1.2.9.1.2.1
List of sensor numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphThermHygroSensorEntry

wtWebGraphThermHygroSensorNo		1.3.6.1.4.1.5040.1.2.9.1.2.1.1
Sensor number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

wtWebGraphThermHygroTempValueTable		1.3.6.1.4.1.5040.1.2.9.1.3
List of measurement values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphThermHygroTempValueEntry

wtWebGraphThermHygroTempValueEntry		1.3.6.1.4.1.5040.1.2.9.1.3.1
Measurement values of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphThermHygroTempValueEntry

wtWebGraphThermHygroTempValue		1.3.6.1.4.1.5040.1.2.9.1.3.1.1
Measurement value of the sensor, ASCII, 5 characters in length.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(5)

wtWebGraphThermHygroBinaryTempValueTable		1.3.6.1.4.1.5040.1.2.9.1.4
List of binary measurement values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphThermHygroBinaryTempValueEntry

wtWebGraphThermHygroBinaryTempValueEntry		1.3.6.1.4.1.5040.1.2.9.1.4.1
Binary measurement values of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphThermHygroBinaryTempValueEntry

wtWebGraphThermHygroBinaryTempValue		1.3.6.1.4.1.5040.1.2.9.1.4.1.1
Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroSessCntrlPassword		1.3.6.1.4.1.5040.1.2.9.2.1
Entering this password opens a session which is ended by writing a 1 to wtWebGraphThermHygroSessCntrlLogout. When read this variable provides a string of length zero.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroSessCntrlConfigMode		1.3.6.1.4.1.5040.1.2.9.2.2
When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroSessCntrl-NoSession(0), wtWebGraphThermHygroSessCntrl-Session(1)

wtWebGraphThermHygroSessCntrlLogout		1.3.6.1.4.1.5040.1.2.9.2.3
If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroSessCntrlAdminPassword		1.3.6.1.4.1.5040.1.2.9.2.4
This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroSessCntrlConfigPassword		1.3.6.1.4.1.5040.1.2.9.2.5
This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroDeviceName		1.3.6.1.4.1.5040.1.2.9.3.1.1.1
Name of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroDeviceText		1.3.6.1.4.1.5040.1.2.9.3.1.1.2
Description of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroDeviceLocation		1.3.6.1.4.1.5040.1.2.9.3.1.1.3
Description of the location of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroDeviceContact		1.3.6.1.4.1.5040.1.2.9.3.1.1.4
Contact address of the system operator of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroTzOffsetHrs		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.1
Offset hours for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroTzOffsetMin		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.2
Offset minutes for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroTzEnable		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroStTzOffsetHrs		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.4
Offset hours of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroStTzOffsetMin		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.5
Offset minutes of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroStTzEnable		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.6
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroStTzStartMonth		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.7
Month in which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroStartMonth-January(1), wtWebGraphThermHygroStartMonth-February(2), wtWebGraphThermHygroStartMonth-March(3), wtWebGraphThermHygroStartMonth-April(4), wtWebGraphThermHygroStartMonth-May(5), wtWebGraphThermHygroStartMonth-June(6), wtWebGraphThermHygroStartMonth-July(7), wtWebGraphThermHygroStartMonth-August(8), wtWebGraphThermHygroStartMonth-September(9), wtWebGraphThermHygroStartMonth-October(10), wtWebGraphThermHygroStartMonth-November(11), wtWebGraphThermHygroStartMonth-December(12)

wtWebGraphThermHygroStTzStartMode		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.8
Mode of the day of the week for which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroStartMode-first(1), wtWebGraphThermHygroStartMode-second(2), wtWebGraphThermHygroStartMode-third(3), wtWebGraphThermHygroStartMode-fourth(4), wtWebGraphThermHygroStartMode-last(5)

wtWebGraphThermHygroStTzStartWday		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.9
Day of the week on which the change is made from winter time to summer time
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroStartWday-Sunday(1), wtWebGraphThermHygroStartWday-Monday(2), wtWebGraphThermHygroStartWday-Tuesday(3), wtWebGraphThermHygroStartWday-Thursday(4), wtWebGraphThermHygroStartWday-Wednesday(5), wtWebGraphThermHygroStartWday-Friday(6), wtWebGraphThermHygroStartWday-Saturday(7)

wtWebGraphThermHygroStTzStartHrs		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.10
Hour in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroStTzStartMin		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.11
Minute in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroStTzStopMonth		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.12
Month in which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroStopMonth-January(1), wtWebGraphThermHygroStopMonth-February(2), wtWebGraphThermHygroStopMonth-March(3), wtWebGraphThermHygroStopMonth-April(4), wtWebGraphThermHygroStopMonth-May(5), wtWebGraphThermHygroStopMonth-June(6), wtWebGraphThermHygroStopMonth-July(7), wtWebGraphThermHygroStopMonth-August(8), wtWebGraphThermHygroStopMonth-September(9), wtWebGraphThermHygroStopMonth-October(10), wtWebGraphThermHygroStopMonth-November(11), wtWebGraphThermHygroStopMonth-December(12)

wtWebGraphThermHygroStTzStopMode		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.13
Mode of the week day on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroStopMode-first(1), wtWebGraphThermHygroStopMode-second(2), wtWebGraphThermHygroStopMode-third(3), wtWebGraphThermHygroStopMode-fourth(4), wtWebGraphThermHygroStopMode-last(5)

wtWebGraphThermHygroStTzStopWday		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.14
Day of the week on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroStopWday-Sunday(1), wtWebGraphThermHygroStopWday-Monday(2), wtWebGraphThermHygroStopWday-Tuesday(3), wtWebGraphThermHygroStopWday-Thursday(4), wtWebGraphThermHygroStopWday-Wednesday(5), wtWebGraphThermHygroStopWday-Friday(6), wtWebGraphThermHygroStopWday-Saturday(7)

wtWebGraphThermHygroStTzStopHrs		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.15
Hour at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroStTzStopMin		1.3.6.1.4.1.5040.1.2.9.3.1.2.1.16
Minute at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroTimeServer1		1.3.6.1.4.1.5040.1.2.9.3.1.2.2.1
IP address or name of the 1st time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroTimeServer2		1.3.6.1.4.1.5040.1.2.9.3.1.2.2.2
IP address or name of the 2nd time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroTsEnable		1.3.6.1.4.1.5040.1.2.9.3.1.2.2.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroTsSyncTime		1.3.6.1.4.1.5040.1.2.9.3.1.2.2.4
Daily synchronisation time with the time server (hour: 0-23).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroClockHrs		1.3.6.1.4.1.5040.1.2.9.3.1.2.3.1
Clock hours taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..23

wtWebGraphThermHygroClockMin		1.3.6.1.4.1.5040.1.2.9.3.1.2.3.2
Clock minutes taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..59

wtWebGraphThermHygroClockDay		1.3.6.1.4.1.5040.1.2.9.3.1.2.3.3
Date: Day of the month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..31

wtWebGraphThermHygroClockMonth		1.3.6.1.4.1.5040.1.2.9.3.1.2.3.4
Date: Month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroClockMonth-January(1), wtWebGraphThermHygroClockMonth-February(2), wtWebGraphThermHygroClockMonth-March(3), wtWebGraphThermHygroClockMonth-April(4), wtWebGraphThermHygroClockMonth-May(5), wtWebGraphThermHygroClockMonth-June(6), wtWebGraphThermHygroClockMonth-July(7), wtWebGraphThermHygroClockMonth-August(8), wtWebGraphThermHygroClockMonth-September(9), wtWebGraphThermHygroClockMonth-October(10), wtWebGraphThermHygroClockMonth-November(11), wtWebGraphThermHygroClockMonth-December(12)

wtWebGraphThermHygroClockYear		1.3.6.1.4.1.5040.1.2.9.3.1.2.3.5
Date: Year, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

wtWebGraphThermHygroIpAddress		1.3.6.1.4.1.5040.1.2.9.3.1.3.1.1
IP address of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphThermHygroSubnetMask		1.3.6.1.4.1.5040.1.2.9.3.1.3.1.2
Subnet mask of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphThermHygroGateway		1.3.6.1.4.1.5040.1.2.9.3.1.3.1.3
Gateway of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphThermHygroDnsServer1		1.3.6.1.4.1.5040.1.2.9.3.1.3.1.4
IP address of the 1st DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroDnsServer2		1.3.6.1.4.1.5040.1.2.9.3.1.3.1.5
IP address of the 2nd DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAddConfig		1.3.6.1.4.1.5040.1.2.9.3.1.3.1.6
Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: BOOTP disable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroStartup		1.3.6.1.4.1.5040.1.2.9.3.1.3.2.1
Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroGetHeaderEnable		1.3.6.1.4.1.5040.1.2.9.3.1.3.2.2
If this bit is set, every answer of a short form GET question will be lead by the IP-address and name of the device: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : GET Header enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroHttpPort		1.3.6.1.4.1.5040.1.2.9.3.1.3.2.3
Definition of the standard HTML port (Default: 80).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphThermHygroMailAdName		1.3.6.1.4.1.5040.1.2.9.3.1.3.3.1
Device name for mail administration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMailReply		1.3.6.1.4.1.5040.1.2.9.3.1.3.3.2
Reply address for the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMailServer		1.3.6.1.4.1.5040.1.2.9.3.1.3.3.3
Name or IP address of the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1MailEnable		1.3.6.1.4.1.5040.1.2.9.3.1.3.3.4
Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMailAuthentication		1.3.6.1.4.1.5040.1.2.9.3.1.3.3.5
Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroMailAuthUser		1.3.6.1.4.1.5040.1.2.9.3.1.3.3.6
Name of the user to be authenticated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMailAuthPassword		1.3.6.1.4.1.5040.1.2.9.3.1.3.3.7
Authentication password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMailPop3Server		1.3.6.1.4.1.5040.1.2.9.3.1.3.3.8
Name or Ip-address of the POP3 Servers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroSnmpCommunityStringRead		1.3.6.1.4.1.5040.1.2.9.3.1.3.4.1
Community string read only
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroSnmpCommunityStringReadWrite		1.3.6.1.4.1.5040.1.2.9.3.1.3.4.2
Community string read / write
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroSystemTrapManagerIP		1.3.6.1.4.1.5040.1.2.9.3.1.3.4.3
Name or IP address of the TCP server which accepts the system trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroSystemTrapEnable		1.3.6.1.4.1.5040.1.2.9.3.1.3.4.4
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroSnmpEnable		1.3.6.1.4.1.5040.1.2.9.3.1.3.4.5
Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroSnmpCommunityStringTrap		1.3.6.1.4.1.5040.1.2.9.3.1.3.4.6
Community string send within traps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroUdpPort		1.3.6.1.4.1.5040.1.2.9.3.1.3.5.1
Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphThermHygroUdpEnable		1.3.6.1.4.1.5040.1.2.9.3.1.3.5.2
Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroSyslogServerIP		1.3.6.1.4.1.5040.1.2.9.3.1.3.6.1
Name or IP address of the Syslog server, which accepts the Syslog messgaes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroSyslogServerPort		1.3.6.1.4.1.5040.1.2.9.3.1.3.6.2
Portnumber of the Syslog servers, default 514.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroSyslogSystemMessagesEnable		1.3.6.1.4.1.5040.1.2.9.3.1.3.6.3
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroSyslogEnable		1.3.6.1.4.1.5040.1.2.9.3.1.3.6.4
Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroFTPServerIP		1.3.6.1.4.1.5040.1.2.9.3.1.3.7.1
Name or IP address of the FTP server, which accepts the FTP messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroFTPServerControlPort		1.3.6.1.4.1.5040.1.2.9.3.1.3.7.2
Portnumber of the control port of the FTP server, default 21.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroFTPUserName		1.3.6.1.4.1.5040.1.2.9.3.1.3.7.3
FTP Loggin: user name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroFTPPassword		1.3.6.1.4.1.5040.1.2.9.3.1.3.7.4
FTP Loggin: user password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroFTPAccount		1.3.6.1.4.1.5040.1.2.9.3.1.3.7.5
FTP Loggin: name of account.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroFTPOption		1.3.6.1.4.1.5040.1.2.9.3.1.3.7.6
Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroFTPEnable		1.3.6.1.4.1.5040.1.2.9.3.1.3.7.7
Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroLoggerTimebase		1.3.6.1.4.1.5040.1.2.9.3.1.4.1
Time base of the data logger
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroDatalogger-1Min(1), wtWebGraphThermHygroDatalogger-5Min(2), wtWebGraphThermHygroDatalogger-15Min(3), wtWebGraphThermHygroDatalogger-60Min(4)

wtWebGraphThermHygroLoggerSensorSel		1.3.6.1.4.1.5040.1.2.9.3.1.4.2
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroDisplaySensorSel		1.3.6.1.4.1.5040.1.2.9.3.1.4.3
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroSensorColorTable		1.3.6.1.4.1.5040.1.2.9.3.1.4.4
List of sensor colors for the praphical presentation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphThermHygroSensorColorEntry

wtWebGraphThermHygroSensorColorEntry		1.3.6.1.4.1.5040.1.2.9.3.1.4.4.1
Index numbers of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphThermHygroSensorColorEntry

wtWebGraphThermHygroSensorColor		1.3.6.1.4.1.5040.1.2.9.3.1.4.4.1.1
Color of the sensors at the praphical presention.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebGraphThermHygroAutoScaleEnable		1.3.6.1.4.1.5040.1.2.9.3.1.4.5
If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroVerticalUpperLimit		1.3.6.1.4.1.5040.1.2.9.3.1.4.6
This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroVerticalLowerLimit		1.3.6.1.4.1.5040.1.2.9.3.1.4.7
This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroHorizontalZoom		1.3.6.1.4.1.5040.1.2.9.3.1.4.8
Defines the default zoom stage, if no auto scaling is selected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphThermHygroZoom-25min(1), wtWebGraphThermHygroZoom-75min(2), wtWebGraphThermHygroZoom-5hrs(3), wtWebGraphThermHygroZoom-30hrs(4), wtWebGraphThermHygroZoom-5days(5), wtWebGraphThermHygroZoom-25days(6)

wtWebGraphThermHygroAlarmCount		1.3.6.1.4.1.5040.1.2.9.3.1.5.1
Number of independent alarms.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebGraphThermHygroAlarmIfTable		1.3.6.1.4.1.5040.1.2.9.3.1.5.2
List of alarm indices.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphThermHygroAlarmIfEntry

wtWebGraphThermHygroAlarmIfEntry		1.3.6.1.4.1.5040.1.2.9.3.1.5.2.1
Numbers of the alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphThermHygroAlarmIfEntry

wtWebGraphThermHygroAlarmNo		1.3.6.1.4.1.5040.1.2.9.3.1.5.2.1.1
Alarm number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebGraphThermHygroAlarmTable		1.3.6.1.4.1.5040.1.2.9.3.1.5.3
List of settings depending on the alarm number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphThermHygroAlarmEntry

wtWebGraphThermHygroAlarmEntry		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1
Alarm parameters of the individual alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphThermHygroAlarmEntry

wtWebGraphThermHygroAlarmTrigger		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.1
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroAlarmMin		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.2
Minimum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmMax		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.3
Maximum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmHysteresis		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.4
Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmDelay		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.5
Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmInterval		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.6
Send interval for alarm messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmEnable		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.7
Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroAlarmEMailAddr		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.8
E-Mail address for sending the alarm mail to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmMailSubject		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.9
Subject line for alarm mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmMailText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.10
Alarm mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmManagerIP		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.11
Name or IP address of the SNMP Manager which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmTrapText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.12
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmMailOptions		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.13
Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroAlarmTcpIpAddr		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.14
Name or IP address of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmTcpPort		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.15
Port number of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphThermHygroAlarmTcpText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.16
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmClearMailSubject		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.17
Subject line for alarm clear mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmClearMailText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.18
Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmClearTrapText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.19
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmClearTcpText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.20
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmDeltaTemp		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.21
Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmRHMin		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.22
Minimum rel. Humidity in percent with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmRHMax		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.23
Maximum rel.Humidity in percent with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmRHHysteresis		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.24
Hysterese rel. Humidity in percent with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmAHMin		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.25
Minimum abs. Humidity in g/(mmm) with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmAHMax		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.26
Maximum abs. Humidity in g/(mmm) with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmSyslogIpAddr		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.27
IP address of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphThermHygroAlarmSyslogPort		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.28
Port number of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphThermHygroAlarmSyslogText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.29
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmSyslogClearText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.30
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmFtpDataPort		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.31
Local data port: 1..65535 or AUTO: the next free port will be assigned.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmFtpFileName		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.32
Name of the file including path informations.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmFtpText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.33
Message text to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmFtpClearText		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.34
Alarm clear message to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroAlarmFtpOptions		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.35
Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroAlarmTimerCron		1.3.6.1.4.1.5040.1.2.9.3.1.5.3.1.36
This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroPortTable		1.3.6.1.4.1.5040.1.2.9.3.2.1
List of settings depending on the sensor number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphThermHygroPortEntry

wtWebGraphThermHygroPortEntry		1.3.6.1.4.1.5040.1.2.9.3.2.1.1
Sensor parameters for the individual sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphThermHygroPortEntry

wtWebGraphThermHygroPortName		1.3.6.1.4.1.5040.1.2.9.3.2.1.1.1
Name of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroPortText		1.3.6.1.4.1.5040.1.2.9.3.2.1.1.2
Description of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroPortOffset1		1.3.6.1.4.1.5040.1.2.9.3.2.1.1.3
Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroPortTemperature1		1.3.6.1.4.1.5040.1.2.9.3.2.1.1.4
Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroPortOffset2		1.3.6.1.4.1.5040.1.2.9.3.2.1.1.5
Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroPortTemperature2		1.3.6.1.4.1.5040.1.2.9.3.2.1.1.6
Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroPortComment		1.3.6.1.4.1.5040.1.2.9.3.2.1.1.7
Offset calibration: informations of date, name of operator, reference devices.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroPortSensorSelect		1.3.6.1.4.1.5040.1.2.9.3.2.1.1.8
Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : PT100 Bit 1 : PT1000 (default) Bit 2-7: unused Binary coded options for sensor 2: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : W&T Sensor rel. humidity (default) Bit 1 : Skalar 0-2.5V Bit 2 : Disconnect Bit 3-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphThermHygroMfName		1.3.6.1.4.1.5040.1.2.9.3.3.1
Manufacturer company name
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMfAddr		1.3.6.1.4.1.5040.1.2.9.3.3.2
Manufacturer address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMfHotline		1.3.6.1.4.1.5040.1.2.9.3.3.3
Manufacturer hotline.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMfInternet		1.3.6.1.4.1.5040.1.2.9.3.3.4
Manufacturer Internet address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMfDeviceTyp		1.3.6.1.4.1.5040.1.2.9.3.3.5
Manufacturer device name (model number).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroMfOrderNo		1.3.6.1.4.1.5040.1.2.9.3.3.6
Manufacturer part number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroDiagErrorCount		1.3.6.1.4.1.5040.1.2.9.4.1
Number of entries in the error memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroDiagBinaryError		1.3.6.1.4.1.5040.1.2.9.4.2
Error causes coded bit-by-bit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroDiagErrorIndex		1.3.6.1.4.1.5040.1.2.9.4.3
The value of this variable is used as an index to read an error massege from wtWebGraphThermHygroDiagErrorMessage. Errors are numbered from 1 to wtWebGraphThermHygroDiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphThermHygroDiagErrorMessage.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroDiagErrorMessage		1.3.6.1.4.1.5040.1.2.9.4.4
Using wtWebGraphThermHygroDiagErrorIndex as an index, the appropriate message is available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphThermHygroDiagErrorClear		1.3.6.1.4.1.5040.1.2.9.4.5
Writing 1 into this variable clears all diagnosis messages.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER

wtWebGraphThermHygroAlert1		31
This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert2		32
This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert3		33
This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert4		34
This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert5		35
This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert6		36
This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert7		37
This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert8		38
This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert9		91
This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert10		92
This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert11		93
This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert12		94
This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert13		95
This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert14		96
This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert15		97
This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlert16		98
This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphThermHygroAlertDiag		110
This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE