Wellfleet-ASR-MIB

File: Wellfleet-ASR-MIB.mib (35499 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
Wellfleet-COMMON-MIB

Imported symbols

IpAddress Counter OBJECT-TYPE
DisplayString wfAsrGroup

Defined Types

WfAsrX213PriEntry  
SEQUENCE    
  wfAsrX213PriDelete INTEGER
  wfAsrX213PriLowVal INTEGER
  wfAsrX213PriHiVal INTEGER
  wfAsrX213PriSwVal INTEGER

WfAsrRtrPriEntry  
SEQUENCE    
  wfAsrRtrPriDelete INTEGER
  wfAsrRtrPriLowVal INTEGER
  wfAsrRtrPriHiVal INTEGER
  wfAsrRtrPriCvtVal INTEGER

WfAsrMultiHopEntry  
SEQUENCE    
  wfAsrMultiHopDelete INTEGER
  wfAsrMhCircuitNumber INTEGER
  wfAsrMhVcid1 INTEGER
  wfAsrMhVcid2 INTEGER

WfAsrDirectExceptEntry  
SEQUENCE    
  wfAsrServiceProtocol INTEGER
  wfAsrServicePort INTEGER
  wfAsrSrcPortLow INTEGER
  wfAsrSrcPortHigh INTEGER
  wfAsrDestPortLow INTEGER
  wfAsrDestPortHigh INTEGER

WfAsrCircuitEntry  
SEQUENCE    
  wfAsrCircuitCreate INTEGER
  wfAsrCircuitEnable INTEGER
  wfAsrCircuitState INTEGER
  wfAsrCircuitNumber INTEGER
  wfAsrCircuitCallCtrl INTEGER
  wfAsrCircuitInReceives Counter
  wfAsrCircuitInDiscards Counter
  wfAsrCircuitSetupRequests Counter
  wfAsrCircuitSetupSucc Counter
  wfAsrCircuitSetupFail Counter
  wfAsrCircuitSVCsEstablished Counter
  wfAsrNegativeNHR Counter
  wfAsrSvcOutboundReqFail Counter
  wfAsrSvcInboundFilterFail Counter
  wfAsrSvcInboundCallValFail Counter

WfAsrFiltEntry  
SEQUENCE    
  wfAsrFilterCreate INTEGER
  wfAsrFilterSlot INTEGER
  wfAsrDestIpAddr IpAddress
  wfAsrDestIpMask IpAddress
  wfAsrSourceIpAddr IpAddress
  wfAsrSourceIpMask IpAddress
  wfAsrDestPortRangeLow INTEGER
  wfAsrDestPortRangeHigh INTEGER
  wfAsrSourcePortRangeLow INTEGER
  wfAsrSourcePortRangeHigh INTEGER
  wfAsrIPProtocol INTEGER
  wfAsrFilterTtl INTEGER
  wfAsrFilterType DisplayString
  wfAsrSvcCircuitNumber INTEGER
  wfAsrSvcVcid1 INTEGER
  wfAsrSvcVcid2 INTEGER
  wfAsrSvcCalledAddr DisplayString
  wfAsrSvcSetupTime INTEGER
  wfAsrSvcType INTEGER
  wfAsrSvcMTU INTEGER
  wfAsrSvcRouterPriOut INTEGER
  wfAsrFrSvcCIRIn INTEGER
  wfAsrFrSvcCIROut INTEGER
  wfAsrFrSvcBCIn INTEGER
  wfAsrFrSvcBCOut INTEGER
  wfAsrFrSvcBEIn INTEGER
  wfAsrFrSvcBEOut INTEGER
  wfAsrFrSvcX213Pri INTEGER
  wfAsrAtmSvcPCRIn INTEGER
  wfAsrAtmSvcPCROut INTEGER
  wfAsrAtmSvcSCRIn INTEGER
  wfAsrAtmSvcSCROut INTEGER
  wfAsrAtmSvcMBSIn INTEGER
  wfAsrAtmSvcMBSOut INTEGER
  wfAsrAtmSvcQOSClassIn INTEGER
  wfAsrAtmSvcQOSClassOut INTEGER
  wfAsrAtmSvcCDVTIn INTEGER
  wfAsrAtmSvcCDVTOut INTEGER
  wfAsrAtmSvcCLRIn INTEGER
  wfAsrAtmSvcCLROut INTEGER

Defined Values

wfAsrBase 1.3.6.1.4.1.18.3.5.9.11.1
OBJECT IDENTIFIER    

wfAsrBaseCreate 1.3.6.1.4.1.18.3.5.9.11.1.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete ASR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAsrBaseEnable 1.3.6.1.4.1.18.3.5.9.11.1.2
Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable ASR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfAsrBaseState 1.3.6.1.4.1.18.3.5.9.11.1.3
The current state of the entire ASR.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpres(4)  

wfAsrNextHopRetryLimit 1.3.6.1.4.1.18.3.5.9.11.1.4
Set the number of next hop entries to try to establish the SVC should the first next hop entry fail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

wfAsrSecureInFilter 1.3.6.1.4.1.18.3.5.9.11.1.5
Enable or disable inbound packet filtering. This object will be implemented as part of the follow on project.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAsrSecureInValid 1.3.6.1.4.1.18.3.5.9.11.1.6
Enable or disable inbound call validation. This object will be implemented as part of a follow on project.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAsrHoldDownTimer 1.3.6.1.4.1.18.3.5.9.11.1.7
The hold down timer is used to prevent retries to a destination that the SVC setup process has failed on. This value would be used if filter/flow spec information is not returned from NHS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrActiveSvcs 1.3.6.1.4.1.18.3.5.9.11.1.8
A count of the SVCs currently active on this router slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrFwdTblEntries 1.3.6.1.4.1.18.3.5.9.11.1.9
A count of entries in the ASR forward table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrFwdTblSeq 1.3.6.1.4.1.18.3.5.9.11.1.10
Sequence number used to determine changes to the ASR forward table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrDnsProxyPort 1.3.6.1.4.1.18.3.5.9.11.1.11
DNS proxy port for QOS translation queries
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(1), default(500), max(32550)  

wfAsrMaxSessions 1.3.6.1.4.1.18.3.5.9.11.1.12
Maximum number of TCP/IP sessions which are to be managed by ASR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(500)  

wfAsrDebugLevel 1.3.6.1.4.1.18.3.5.9.11.1.13
Debug level in which to enable log messages. The greater the value, the more detailed the log messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrUseDynRdiscPref 1.3.6.1.4.1.18.3.5.9.11.1.14
Enable/Disable parameter for ASR to update the Dynamic Router Discovery Preference value. If enabled, wfRdiscInterfacePref must be 0 in order to advertise the ASR Dynamic Preference.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAsrX213PriTable 1.3.6.1.4.1.18.3.5.9.11.2
A table used by ASR to convert the X.213 priority value returned by NHS to a switch specific Value.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAsrX213PriEntry

wfAsrX213PriEntry 1.3.6.1.4.1.18.3.5.9.11.2.1
X.213 conversion table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAsrX213PriEntry  

wfAsrX213PriDelete 1.3.6.1.4.1.18.3.5.9.11.2.1.1
Create/delete indicator for X.213 priority table entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAsrX213PriLowVal 1.3.6.1.4.1.18.3.5.9.11.2.1.2
Low value of X.213 priority range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrX213PriHiVal 1.3.6.1.4.1.18.3.5.9.11.2.1.3
High value of X.213 priority range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrX213PriSwVal 1.3.6.1.4.1.18.3.5.9.11.2.1.4
Switch specific X.213 priority value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrRtrPriTable 1.3.6.1.4.1.18.3.5.9.11.3
A table used by ASR to convert the router priority value returned by NHS to a router priority queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAsrRtrPriEntry

wfAsrRtrPriEntry 1.3.6.1.4.1.18.3.5.9.11.3.1
Router priority conversion table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAsrRtrPriEntry  

wfAsrRtrPriDelete 1.3.6.1.4.1.18.3.5.9.11.3.1.1
Create/delete indicator for Router priority table entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAsrRtrPriLowVal 1.3.6.1.4.1.18.3.5.9.11.3.1.2
Low value of router priority range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrRtrPriHiVal 1.3.6.1.4.1.18.3.5.9.11.3.1.3
High value of router priority range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrRtrPriCvtVal 1.3.6.1.4.1.18.3.5.9.11.3.1.4
Router priority Queue value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrMultiHopTable 1.3.6.1.4.1.18.3.5.9.11.4
A table used by ASR to identify those PVCs that can be used as a multi hop path or overlay network.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAsrMultiHopEntry

wfAsrMultiHopEntry 1.3.6.1.4.1.18.3.5.9.11.4.1
Multi Hop PVC identification.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAsrMultiHopEntry  

wfAsrMultiHopDelete 1.3.6.1.4.1.18.3.5.9.11.4.1.1
Create/delete indicator for multi hop table entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAsrMhCircuitNumber 1.3.6.1.4.1.18.3.5.9.11.4.1.2
Instance identifier. The circuit number of this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrMhVcid1 1.3.6.1.4.1.18.3.5.9.11.4.1.3
VCID 1 value. The Dlci number for Frame Relay, the VPI for ATM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrMhVcid2 1.3.6.1.4.1.18.3.5.9.11.4.1.4
VCID 2 value. The VCI for ATM, NULL for Frame Relay.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrDirectExceptTable 1.3.6.1.4.1.18.3.5.9.11.5
The directional exception asymmetric route avoidance table. This tables index is made up of the protocol and service field.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAsrDirectExceptEntry

wfAsrDirectExceptEntry 1.3.6.1.4.1.18.3.5.9.11.5.1
The ASR directional exception table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAsrDirectExceptEntry  

wfAsrServiceProtocol 1.3.6.1.4.1.18.3.5.9.11.5.1.1
Service protocol indicates what protocol this entry is for. Coices are UDP or TCP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tcp(6), udp(17)  

wfAsrServicePort 1.3.6.1.4.1.18.3.5.9.11.5.1.2
Application port number of service connecting to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrSrcPortLow 1.3.6.1.4.1.18.3.5.9.11.5.1.3
Low port number of application serving as source used at host site.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrSrcPortHigh 1.3.6.1.4.1.18.3.5.9.11.5.1.4
High port number of application serving as source used at host site.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrDestPortLow 1.3.6.1.4.1.18.3.5.9.11.5.1.5
Low port number of application serving as destination used at client site.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrDestPortHigh 1.3.6.1.4.1.18.3.5.9.11.5.1.6
High port number of application serving as destination used at client site.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrCircuitTable 1.3.6.1.4.1.18.3.5.9.11.6
A table which contains configuration information for each circuit defined to ASR but not specific to a specific circuit. The table is indexed by circuit number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAsrCircuitEntry

wfAsrCircuitEntry 1.3.6.1.4.1.18.3.5.9.11.6.1
An ASR circuit description
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAsrCircuitEntry  

wfAsrCircuitCreate 1.3.6.1.4.1.18.3.5.9.11.6.1.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an ASR circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER create(1), delete(2)  

wfAsrCircuitEnable 1.3.6.1.4.1.18.3.5.9.11.6.1.2
Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an ASR circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfAsrCircuitState 1.3.6.1.4.1.18.3.5.9.11.6.1.3
Invalid indicates an error in processing the cfg record
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), invalid(4), notpres(5)  

wfAsrCircuitNumber 1.3.6.1.4.1.18.3.5.9.11.6.1.4
Instance identifier. The circuit number of this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrCircuitCallCtrl 1.3.6.1.4.1.18.3.5.9.11.6.1.5
Define call policy for this SVC circuit. 1) allow inbound calls only 2) allow outbound calls only 3)allow inbound and outbound calls 4) allow neither inbound or outbound calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inboundonly(1), outboundonly(2), inboundandoutbound(3), none(4)  

wfAsrCircuitInReceives 1.3.6.1.4.1.18.3.5.9.11.6.1.6
The total number of input datagrams received at the circuit, including those received in error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrCircuitInDiscards 1.3.6.1.4.1.18.3.5.9.11.6.1.7
The total number of input datagrams discarded due to failed setup attempts, unreachable destinations, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrCircuitSetupRequests 1.3.6.1.4.1.18.3.5.9.11.6.1.8
The total number of SVC setup requests attempted on the circuit , including those which failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrCircuitSetupSucc 1.3.6.1.4.1.18.3.5.9.11.6.1.9
The total number of SVC setup requests attempted on the circuit which resulted in an SVC being established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrCircuitSetupFail 1.3.6.1.4.1.18.3.5.9.11.6.1.10
The total number of SVC setup requests attempted on the circuit which resulted in an SVC not being established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrCircuitSVCsEstablished 1.3.6.1.4.1.18.3.5.9.11.6.1.11
The total number of SVCs currently established on the circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrNegativeNHR 1.3.6.1.4.1.18.3.5.9.11.6.1.12
Count of negative NHR responses received from NHRP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrSvcOutboundReqFail 1.3.6.1.4.1.18.3.5.9.11.6.1.13
Count of outbound requests for SVCs that failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrSvcInboundFilterFail 1.3.6.1.4.1.18.3.5.9.11.6.1.14
Count of inbound packets failing inbound packet filtering.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrSvcInboundCallValFail 1.3.6.1.4.1.18.3.5.9.11.6.1.15
Count of inbound SVC call validation failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfAsrFiltTable 1.3.6.1.4.1.18.3.5.9.11.7
A table containing setup information related to an SVC. The table is indexed by slot,dest ip addr and mask, source ip addr and mask, source and dest port ranges and protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfAsrFiltEntry

wfAsrFiltEntry 1.3.6.1.4.1.18.3.5.9.11.7.1
ASR SVC setup information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfAsrFiltEntry  

wfAsrFilterCreate 1.3.6.1.4.1.18.3.5.9.11.7.1.1
Create/delete this filter entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAsrFilterSlot 1.3.6.1.4.1.18.3.5.9.11.7.1.2
The router slot on which this filter exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrDestIpAddr 1.3.6.1.4.1.18.3.5.9.11.7.1.3
Filter destination IP address reference value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfAsrDestIpMask 1.3.6.1.4.1.18.3.5.9.11.7.1.4
Filter destination IP address mask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfAsrSourceIpAddr 1.3.6.1.4.1.18.3.5.9.11.7.1.5
Filter source IP address reference value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfAsrSourceIpMask 1.3.6.1.4.1.18.3.5.9.11.7.1.6
Filter source IP address mask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wfAsrDestPortRangeLow 1.3.6.1.4.1.18.3.5.9.11.7.1.7
The low value for the range of TCP/UDP destination ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrDestPortRangeHigh 1.3.6.1.4.1.18.3.5.9.11.7.1.8
The high value for the range of TCP/UDP destination ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrSourcePortRangeLow 1.3.6.1.4.1.18.3.5.9.11.7.1.9
The low value for the range of TCP/UDP source ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrSourcePortRangeHigh 1.3.6.1.4.1.18.3.5.9.11.7.1.10
The high value for the range of TCP/UDP source ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrIPProtocol 1.3.6.1.4.1.18.3.5.9.11.7.1.11
IP protocol for this filter (TCP or UDP).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrFilterTtl 1.3.6.1.4.1.18.3.5.9.11.7.1.12
For SVC filters, this is the SVC idle time (seconds). For all other filter types, this is the filter expiration time (seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrFilterType 1.3.6.1.4.1.18.3.5.9.11.7.1.13
Type of filter (SVC, NOSVC, in-progress, dest unreachable).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAsrSvcCircuitNumber 1.3.6.1.4.1.18.3.5.9.11.7.1.14
Circuit number on which the SVC is created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrSvcVcid1 1.3.6.1.4.1.18.3.5.9.11.7.1.15
For Frame Relay SVCs, this is the DLCI value. For ATM SVCs, this is the VPI value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrSvcVcid2 1.3.6.1.4.1.18.3.5.9.11.7.1.16
For ATM SVCs, this is the VCI value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrSvcCalledAddr 1.3.6.1.4.1.18.3.5.9.11.7.1.17
SVC Called Party Address
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfAsrSvcSetupTime 1.3.6.1.4.1.18.3.5.9.11.7.1.18
Time stamp of when the SVC was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrSvcType 1.3.6.1.4.1.18.3.5.9.11.7.1.19
Type of SVC created (Frame Relay or ATM).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fr(1), atm(2)  

wfAsrSvcMTU 1.3.6.1.4.1.18.3.5.9.11.7.1.20
The maximum transmission unit for this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrSvcRouterPriOut 1.3.6.1.4.1.18.3.5.9.11.7.1.21
The router priority queue to be used for the packets sent on this SVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrFrSvcCIRIn 1.3.6.1.4.1.18.3.5.9.11.7.1.22
Frame Relay SVC commited information rate - inbound (bps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrFrSvcCIROut 1.3.6.1.4.1.18.3.5.9.11.7.1.23
Frame Relay SVC commited information rate - outbound (bps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrFrSvcBCIn 1.3.6.1.4.1.18.3.5.9.11.7.1.24
Frame Relay commited burst rate for SVC - inbound (bps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrFrSvcBCOut 1.3.6.1.4.1.18.3.5.9.11.7.1.25
Frame Relay commited burst rate for the SVC - outbound (bps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrFrSvcBEIn 1.3.6.1.4.1.18.3.5.9.11.7.1.26
Frame Relay excess burst rate for the SVC - inbound (bps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrFrSvcBEOut 1.3.6.1.4.1.18.3.5.9.11.7.1.27
Frame Relay excess burst rate for the SVC - outbound (bps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrFrSvcX213Pri 1.3.6.1.4.1.18.3.5.9.11.7.1.28
Frame Relay SVC X.213 data priority value passed to the switch during call setup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcPCRIn 1.3.6.1.4.1.18.3.5.9.11.7.1.29
ATM SVC Peak Cell Rate - inbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcPCROut 1.3.6.1.4.1.18.3.5.9.11.7.1.30
ATM SVC Peak Cell Rate - outbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcSCRIn 1.3.6.1.4.1.18.3.5.9.11.7.1.31
ATM SVC Sustainable Cell Rate - inbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcSCROut 1.3.6.1.4.1.18.3.5.9.11.7.1.32
ATM SVC Sustainable Cell Rate - outbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcMBSIn 1.3.6.1.4.1.18.3.5.9.11.7.1.33
ATM SVC Maximum Burst Size - inbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcMBSOut 1.3.6.1.4.1.18.3.5.9.11.7.1.34
ATM SVC Maximum Burst Size - outbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcQOSClassIn 1.3.6.1.4.1.18.3.5.9.11.7.1.35
ATM SVC Quality of Service - inbound. Class 0 through 4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcQOSClassOut 1.3.6.1.4.1.18.3.5.9.11.7.1.36
ATM SVC Quality of Service - outbound. Class 0 through 4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcCDVTIn 1.3.6.1.4.1.18.3.5.9.11.7.1.37
ATM SVC Cell Delay Variation Tolerance - inbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcCDVTOut 1.3.6.1.4.1.18.3.5.9.11.7.1.38
ATM SVC Cell Delay Variation Tolerance - outbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcCLRIn 1.3.6.1.4.1.18.3.5.9.11.7.1.39
ATM SVC Cell Loss Ratio - inbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrAtmSvcCLROut 1.3.6.1.4.1.18.3.5.9.11.7.1.40
ATM SVC Cell Loss Ratio - outbound.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfAsrTest 1.3.6.1.4.1.18.3.5.9.11.8
OBJECT IDENTIFIER    

wfAsrTestCreate 1.3.6.1.4.1.18.3.5.9.11.8.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete ASR Test Object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfAsrTestChangeVal 1.3.6.1.4.1.18.3.5.9.11.8.2
Value to set the protocol field in the ASR Fwd Table. This will take the SVC entry matching the Dlci and Cct number and change the filter. This is used only for Inbound Pkt Filtering tests
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrTestDlci 1.3.6.1.4.1.18.3.5.9.11.8.3
Dlci of SVC Filter entry to change
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfAsrTestCct 1.3.6.1.4.1.18.3.5.9.11.8.4
Circuit number of SVC Filter to change
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER