Wellfleet-FR2-MIB

File: Wellfleet-FR2-MIB.mib (177034 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
Wellfleet-COMMON-MIB

Imported symbols

Counter TimeTicks Gauge
OBJECT-TYPE DisplayString wfFrameRelay2Group

Defined Types

WfFrIfDlcmiEntry  
SEQUENCE    
  wfFrDlcmiDelete INTEGER
  wfFrDlcmiDisable INTEGER
  wfFrDlcmiLineNumber INTEGER
  wfFrDlcmiLLIndex INTEGER
  wfFrDlcmiCircuit INTEGER
  wfFrDlcmiManagementType INTEGER
  wfFrDlcmiStatus INTEGER
  wfFrDlcmiAddress INTEGER
  wfFrDlcmiAddressLen INTEGER
  wfFrDlcmiPollingInterval INTEGER
  wfFrDlcmiFullEnquiryInterval INTEGER
  wfFrDlcmiErrorThreshold INTEGER
  wfFrDlcmiMonitoredEvents INTEGER
  wfFrDlcmiMaxSupportedVCs INTEGER
  wfFrDlcmiVCsConfigured INTEGER
  wfFrDlcmiMulticast INTEGER
  wfFrDlcmiSeqCount INTEGER
  wfFrDlcmiLastReceived INTEGER
  wfFrDlcmiPassiveSeqCount INTEGER
  wfFrDlcmiPassiveReceived INTEGER
  wfFrDlcmiPolls INTEGER
  wfFrDlcmiCongestionDisable INTEGER
  wfFrDlcmiCongestionTmr INTEGER
  wfFrDlcmiCongestionCtr INTEGER
  wfFrErrType INTEGER
  wfFrErrData OCTET STRING
  wfFrErrTime TimeTicks
  wfFrErrDiscards Counter
  wfFrErrDrops Counter
  wfFrErrFaults Counter
  wfFrErrFaultTime TimeTicks
  wfFrDlcmiDialFailureDisable INTEGER
  wfFrDlcmiInterfaceType INTEGER
  wfFrDlcmiBackupFilterCct INTEGER
  wfFrDlcmiDebugLevel INTEGER
  wfFrDlcmiTraceLevel INTEGER
  wfFrDlcmiCongestionMethod INTEGER
  wfFrDlcmiShapingTmr INTEGER
  wfFrDlcmiShapingHiQueueLimit INTEGER
  wfFrDlcmiShapingNormalQueueLimit INTEGER
  wfFrDlcmiShapingLoQueueLimit INTEGER
  wfFrDlcmiXoffDisable INTEGER
  wfFrDlcmiMissingPolls Counter
  wfFrDlcmiName DisplayString
  wfFrDlcmiEnableSinglePVCUpdate INTEGER
  wfFrDlcmiAnnexSwEnq INTEGER
  wfFrDlcmiAnnexSwEnqTmr INTEGER
  wfFrDlcmiExtraStatusInfoEnable INTEGER

WfFrVCircuitEntry  
SEQUENCE    
  wfFrCircuitDelete INTEGER
  wfFrCircuitLineNumber INTEGER
  wfFrCircuitLLIndex INTEGER
  wfFrCircuitNumber INTEGER
  wfFrCircuitDlci INTEGER
  wfFrCircuitState INTEGER
  wfFrCircuitStateSet INTEGER
  wfFrCircuitReceivedFECNs Counter
  wfFrCircuitReceivedBECNs Counter
  wfFrCircuitSentFrames Counter
  wfFrCircuitSentOctets Counter
  wfFrCircuitReceivedFrames Counter
  wfFrCircuitReceivedOctets Counter
  wfFrCircuitCreationTime TimeTicks
  wfFrCircuitLastTimeChange TimeTicks
  wfFrCircuitCommittedBurst INTEGER
  wfFrCircuitExcessBurst INTEGER
  wfFrCircuitThroughput INTEGER
  wfFrCircuitMulticast INTEGER
  wfFrCircuitType INTEGER
  wfFrCircuitDiscards Counter
  wfFrCircuitDrops Counter
  wfFrCircuitSubCct INTEGER
  wfFrCircuitMode INTEGER
  wfFrCircuitCongestionDisable INTEGER
  wfFrCircuitCongestionState INTEGER
  wfFrCircuitCongestionTmr INTEGER
  wfFrCircuitCongestionCtr INTEGER
  wfFrCircuitWcpEnable INTEGER
  wfFrCircuitPrimaryHoldTmr INTEGER
  wfFrCircuitInactivityTimer INTEGER
  wfFrCircuitInactivityMode INTEGER
  wfFrCircuitCongestionMethod INTEGER
  wfFrCircuitShapedHiXmits Counter
  wfFrCircuitShapedNormalXmits Counter
  wfFrCircuitShapedLoXmits Counter
  wfFrCircuitShapedHiClippedPkts Counter
  wfFrCircuitShapedNormalClippedPkts Counter
  wfFrCircuitShapedLoClippedPkts Counter
  wfFrCircuitShapedHiQHighWaterPkts Gauge
  wfFrCircuitShapedNormalQHighWaterPkts Gauge
  wfFrCircuitShapedLoQHighWaterPkts Gauge
  wfFrCircuitShapedDroppedPkts Counter
  wfFrCircuitShapedLargePkts Counter
  wfFrCircuitShapedHiTotalOctets Counter
  wfFrCircuitShapedNormalTotalOctets Counter
  wfFrCircuitShapedLoTotalOctets Counter
  wfFrCircuitShapedPktsNotQueued Counter
  wfFrCircuitShapedHighWaterPktsClear INTEGER
  wfFrCircuitShapedHiQueueLimit INTEGER
  wfFrCircuitShapedNormalQueueLimit INTEGER
  wfFrCircuitShapedLoQueueLimit INTEGER
  wfFrCircuitStartupDelay INTEGER
  wfFrCircuitCurHiQueueLimit Gauge
  wfFrCircuitCurNormalQueueLimit Gauge
  wfFrCircuitCurLoQueueLimit Gauge
  wfFrCircuitShapingState INTEGER
  wfFrCircuitBwThreshold INTEGER
  wfFrCircuitReceivedDEs Counter
  wfFrCircuitSentDEs Counter

WfFrCctErrorEntry  
SEQUENCE    
  wfFrCctErrorCct INTEGER
  wfFrCctErrorDrops Counter
  wfFrCctErrorDiscards Counter

WfFrServiceRecordEntry  
SEQUENCE    
  wfFrServiceRecordDelete INTEGER
  wfFrServiceRecordLineNumber INTEGER
  wfFrServiceRecordLLIndex INTEGER
  wfFrServiceRecordCircuitNumber INTEGER
  wfFrServiceRecordDefaultFlag INTEGER
  wfFrServiceRecordNumberVCs INTEGER
  wfFrServiceRecordName DisplayString
  wfFrServiceRecordState INTEGER
  wfFrServiceRecordPreMultiCircuit INTEGER
  wfFrServiceRecordBackupFilterCct INTEGER
  wfFrServiceRecordBackupLineNumber INTEGER
  wfFrServiceRecordBackupLLIndex INTEGER
  wfFrServiceRecordBackupMainCct INTEGER
  wfFrServiceRecordPrimaryLineNumber INTEGER
  wfFrServiceRecordPrimaryLLIndex INTEGER
  wfFrServiceRecordPrimaryMainCct INTEGER
  wfFrServiceRecordSVCDisable INTEGER
  wfFrServiceRecordSVCLocNum DisplayString
  wfFrServiceRecordSVCLocSubAdr DisplayString
  wfFrServiceRecordSVCLocPlan INTEGER
  wfFrServiceRecordSVCLocTypeNum INTEGER
  wfFrServiceRecordSVCCallBlock INTEGER
  wfFrServiceRecordSVCInScrnDisable INTEGER
  wfFrServiceRecordSVCInScrnUsage INTEGER
  wfFrServiceRecordSVCInactTimer INTEGER
  wfFrServiceRecordSVCInactMode INTEGER
  wfFrServiceRecordNumberStaticVCs INTEGER
  wfFrServiceRecordNumberDynamicVCs INTEGER
  wfFrServiceRecordNumberSVCs INTEGER
  wfFrServiceRecordNumberActiveVCs INTEGER
  wfFrServiceRecordifLastChange TimeTicks
  wfFrServiceRecordifInOctets Counter
  wfFrServiceRecordifInDiscards Counter
  wfFrServiceRecordifOutOctets Counter
  wfFrServiceRecordifOutDiscards Counter
  wfFrServiceRecordifOutCtrlPkts Counter
  wfFrServiceRecordifInCtrlPkts Counter

WfFrSigEntry  
SEQUENCE    
  wfFrSigDelete INTEGER
  wfFrSigDisable INTEGER
  wfFrSigLineNumber INTEGER
  wfFrSigLLIndex INTEGER
  wfFrSigStatus INTEGER
  wfFrSigCircuit INTEGER
  wfFrSigConformance INTEGER
  wfFrSigSvcIdleTimer INTEGER
  wfFrSigMaxSvcs INTEGER
  wfFrSigSvcDeletePolicy INTEGER
  wfFrSigSvcReplacePolicy INTEGER
  wfFrSigT303 INTEGER
  wfFrSigT305 INTEGER
  wfFrSigT308 INTEGER
  wfFrSigT310 INTEGER
  wfFrSigT322 INTEGER
  wfFrSigN322 INTEGER
  wfFrSigNumMaxSVCs INTEGER
  wfFrSigNumConnRej Counter
  wfFrSigNumSvcRej Counter
  wfFrSigNumSvcFailed Counter

WfFrLapfEntry  
SEQUENCE    
  wfLapfDelete INTEGER
  wfLapfDisable INTEGER
  wfLapfLineNumber INTEGER
  wfLapfLLIndex INTEGER
  wfLapfStatus INTEGER
  wfLapfStationType INTEGER
  wfLapfActionInitiate INTEGER
  wfLapfT200 INTEGER
  wfLapfT203 INTEGER
  wfLapfN200 INTEGER
  wfLapfN201 INTEGER
  wfLapfK INTEGER
  wfLapfRxWin INTEGER
  wfLapfTxWin INTEGER
  wfLapfSABMESent Counter
  wfLapfSABMERcvd Counter
  wfLapfUASent Counter
  wfLapfUARcvd Counter
  wfLapfDISCSent Counter
  wfLapfDISCRcvd Counter
  wfLapfDMSent Counter
  wfLapfDMRcvd Counter
  wfLapfFRMRSent Counter
  wfLapfFRMRRcvd Counter
  wfLapfRNRsSent Counter
  wfLapfRNRsRcvd Counter
  wfLapfREJsSent Counter
  wfLapfREJsRcvd Counter
  wfLapfIFramesSent Counter
  wfLapfIFramesRcvd Counter
  wfLapfUISent Counter
  wfLapfUIRcvd Counter
  wfLapfRRsSent Counter
  wfLapfRRsRcvd Counter
  wfLapfXIDSent Counter
  wfLapfXIDRcvd Counter
  wfLapfT200Timeouts Counter
  wfLapfT203Timeouts Counter
  wfLapfN200Exceeded Counter
  wfLapfN201Error Counter

WfFrFRF4SigEntry  
SEQUENCE    
  wfFrFRF4SigDelete INTEGER
  wfFrFRF4SigDisable INTEGER
  wfFrFRF4SigLineNumber INTEGER
  wfFrFRF4SigLLIndex INTEGER
  wfFrFRF4SigMaxSvcs INTEGER
  wfFrFRF4SigT303 INTEGER
  wfFrFRF4SigT305 INTEGER
  wfFrFRF4SigT308 INTEGER
  wfFrFRF4SigT310 INTEGER
  wfFrFRF4SigT322 INTEGER
  wfFrFRF4SigN322 INTEGER
  wfFrFRF4SigFramesSent Counter
  wfFrFRF4SigOctetsSent Counter
  wfFrFRF4SigFramesReceived Counter
  wfFrFRF4SigOctetsReceived Counter
  wfFrFRF4SigFramesDropped Counter
  wfFrFRF4SigFramesDiscarded Counter
  wfFrFRF4SigSetupRx Counter
  wfFrFRF4SigCallProcRx Counter
  wfFrFRF4SigConnectRx Counter
  wfFrFRF4SigDisconnectRx Counter
  wfFrFRF4SigReleaseRx Counter
  wfFrFRF4SigReleaseCompleteRx Counter
  wfFrFRF4SigStatusRx Counter
  wfFrFRF4SigStatusEnquiryRx Counter
  wfFrFRF4SigSetupTx Counter
  wfFrFRF4SigCallProcTx Counter
  wfFrFRF4SigConnectTx Counter
  wfFrFRF4SigDisconnectTx Counter
  wfFrFRF4SigReleaseTx Counter
  wfFrFRF4SigReleaseCompleteTx Counter
  wfFrFRF4SigStatusTx Counter
  wfFrFRF4SigStatusEnquiryTx Counter

WfFrSVCOptionsEntry  
SEQUENCE    
  wfFrSVCOptionsDelete INTEGER
  wfFrSVCOptionsDisable INTEGER
  wfFrSVCOptionsLineNumber INTEGER
  wfFrSVCOptionsLLIndex INTEGER
  wfFrSVCOptionsCircuitNumber INTEGER
  wfFrSVCOptionsInstanceIndex INTEGER
  wfFrSVCOptionsRemNum DisplayString
  wfFrSVCOptionsRemSubAdr DisplayString
  wfFrSVCOptionsRemPlan INTEGER
  wfFrSVCOptionsRemTypeNum INTEGER
  wfFrSVCOptionsBroadcastDisable INTEGER
  wfFrSVCOptionsInactTimer INTEGER
  wfFrSVCOptionsInactMode INTEGER
  wfFrSVCOptionsX213DataPriority INTEGER
  wfFrSVCOptionsX213DataLQAPriority INTEGER
  wfFrSVCOptionsX213GainPriority INTEGER
  wfFrSVCOptionsX213GainLQAPriority INTEGER
  wfFrSVCOptionsX213KeepPriority INTEGER
  wfFrSVCOptionsX213KeepLQAPriority INTEGER
  wfFrSVCOptionsLLCoreOutThroughput INTEGER
  wfFrSVCOptionsLLCoreInThroughput INTEGER
  wfFrSVCOptionsLLCoreMinOutThroughput INTEGER
  wfFrSVCOptionsLLCoreMinInThroughput INTEGER
  wfFrSVCOptionsLLCoreOutBc INTEGER
  wfFrSVCOptionsLLCoreInBc INTEGER
  wfFrSVCOptionsLLCoreOutBe INTEGER
  wfFrSVCOptionsLLCoreInBe INTEGER
  wfFrSVCOptionsCongestionDisable INTEGER
  wfFrSVCOptionsCongestionTmr INTEGER
  wfFrSVCOptionsCongestionCtr INTEGER
  wfFrSVCOptionsCongestionMethod INTEGER
  wfFrSVCOptionsTrafficShapingDisable INTEGER
  wfFrSVCOptionsWcpEnable INTEGER
  wfFrSVCOptionsName DisplayString

WfFrSVCActiveCallEntry  
SEQUENCE    
  wfFrSVCActiveCallDelete INTEGER
  wfFrSVCActiveCallLineNumber INTEGER
  wfFrSVCActiveCallLLIndex INTEGER
  wfFrSVCActiveCallDLCI INTEGER
  wfFrSVCActiveCallDirection INTEGER
  wfFrSVCActiveCallCircuitNumber INTEGER
  wfFrSVCActiveCallCalledNum DisplayString
  wfFrSVCActiveCallCalledSubAdr DisplayString
  wfFrSVCActiveCallCalledPlan INTEGER
  wfFrSVCActiveCallCalledTypeNum INTEGER
  wfFrSVCActiveCallCallingNum DisplayString
  wfFrSVCActiveCallCallingSubAdr DisplayString
  wfFrSVCActiveCallCallingPlan INTEGER
  wfFrSVCActiveCallCallingTypeNum INTEGER
  wfFrSVCActiveCallX213DataPriority INTEGER
  wfFrSVCActiveCallX213DataLQAPriority INTEGER
  wfFrSVCActiveCallX213GainPriority INTEGER
  wfFrSVCActiveCallX213GainLQAPriority INTEGER
  wfFrSVCActiveCallX213KeepPriority INTEGER
  wfFrSVCActiveCallX213KeepLQAPriority INTEGER
  wfFrSVCActiveCallLLCoreOutThroughput INTEGER
  wfFrSVCActiveCallLLCoreInThroughput INTEGER
  wfFrSVCActiveCallLLCoreMinOutThroughput INTEGER
  wfFrSVCActiveCallLLCoreMinInThroughput INTEGER
  wfFrSVCActiveCallLLCoreOutBc INTEGER
  wfFrSVCActiveCallLLCoreInBc INTEGER
  wfFrSVCActiveCallLLCoreOutBe INTEGER
  wfFrSVCActiveCallLLCoreInBe INTEGER
  wfFrSVCActiveCallConnectTime INTEGER

WfFrPtIntfEntry  
SEQUENCE    
  wfFrPtIntfDelete INTEGER
  wfFrPtIntfDisable INTEGER
  wfFrPtIntfCct INTEGER
  wfFrPtIntfDlci INTEGER
  wfFrPtIntfState INTEGER
  wfFrPtIntfRxFrames Counter
  wfFrPtIntfTxFrames Counter
  wfFrPtIntfDiscards Counter
  wfFrPtIntfDrops Counter

WfFrPtMappingEntry  
SEQUENCE    
  wfFrPtMappingDelete INTEGER
  wfFrPtMappingDisable INTEGER
  wfFrPtMappingCctA INTEGER
  wfFrPtMappingDlciA INTEGER
  wfFrPtMappingCctB INTEGER
  wfFrPtMappingDlciB INTEGER
  wfFrPtMappingState INTEGER

WfFrMlEntry  
SEQUENCE    
  wfFrMlDelete INTEGER
  wfFrMlCircuitNumber INTEGER
  wfFrMlMode INTEGER
  wfFrMlFragPermEnable INTEGER
  wfFrMlCircuitMaxBuffers INTEGER
  wfFrMlFragTriggerSize INTEGER
  wfFrMlFragStrict INTEGER
  wfFrMlAggVCStatusMode INTEGER
  wfFrMlCompressionEnable INTEGER
  wfFrMlHomeSlot INTEGER
  wfFrMlStatsLineCnt Gauge
  wfFrMlStatsBundleSpd Gauge
  wfFrMlStatsTxOctets Counter
  wfFrMlStatsTxPkts Counter
  wfFrMlStatsAvgTxListLen Gauge
  wfFrMlStatsRxOctets Counter
  wfFrMlStatsRxPkts Counter
  wfFrMlStatsReasmFails Counter
  wfFrMlStatsSeqNumberLost Counter
  wfFrMlStatsSeqNumberArrivedLate Counter
  wfFrMlStatsReSeqBufferCnt Gauge
  wfFrMlStatsReSeqBufferMax Counter
  wfFrMlStatsExceededBufferMax Counter
  wfFrMlStatsLinkIdleEvents Counter
  wfFrMlStatsCalcPercent INTEGER
  wfFrMlStatsDebug INTEGER
  wfFrMlStatsReassmBufferCnt Gauge
  wfFrMlStatsReassmBufferMax Counter
  wfFrMlStatsNumPktsFragmented Counter
  wfFrMlStatsPQHiXmits Counter
  wfFrMlStatsPQNormalXmits Counter
  wfFrMlStatsPQLoXmits Counter
  wfFrMlStatsPQHiClippedPkts Counter
  wfFrMlStatsPQNormalClippedPkts Counter
  wfFrMlStatsPQLoClippedPkts Counter
  wfFrMlStatsPQIntrQHighWaterPkts Gauge
  wfFrMlStatsPQHiQHighWaterPkts Gauge
  wfFrMlStatsPQNormalQHighWaterPkts Gauge
  wfFrMlStatsPQLoQHighWaterPkts Gauge
  wfFrMlStatsPQHighWaterPktsClear INTEGER
  wfFrMlStatsPQDroppedPkts Counter
  wfFrMlStatsPQLargePkts Counter
  wfFrMlStatsPQHiTotalOctets Counter
  wfFrMlStatsPQNormalTotalOctets Counter
  wfFrMlStatsPQLoTotalOctets Counter
  wfFrMlStatsPQPktsNotQueued Counter

WfFrMlVCEntry  
SEQUENCE    
  wfFrMlVCDelete INTEGER
  wfFrMlVCCircuitNumber INTEGER
  wfFrMlVCDlci INTEGER
  wfFrMlVCAggState INTEGER
  wfFrMlVCAggNumberVCs INTEGER
  wfFrMlVCAggNumberVCsActive INTEGER
  wfFrMlVCStatsLineCnt Gauge
  wfFrMlVCStatsBundleSpd Gauge
  wfFrMlVCStatsTxOctets Counter
  wfFrMlVCStatsTxPkts Counter
  wfFrMlVCStatsAvgTxListLen Gauge
  wfFrMlVCStatsRxOctets Counter
  wfFrMlVCStatsRxPkts Counter
  wfFrMlVCStatsReasmFails Counter
  wfFrMlVCStatsSeqNumberLost Counter
  wfFrMlVCStatsSeqNumberArrivedLate Counter
  wfFrMlVCStatsReSeqBufferCnt Gauge
  wfFrMlVCStatsReSeqBufferMax Counter
  wfFrMlVCStatsExceededBufferMax Counter
  wfFrMlVCStatsLinkIdleEvents Counter
  wfFrMlVCStatsCalcPercent INTEGER
  wfFrMlVCStatsDebug INTEGER
  wfFrMlVCStatsReassmBufferCnt Gauge
  wfFrMlVCStatsReassmBufferMax Counter
  wfFrMlVCStatsNumPktsFragmented Counter

WfFrMapDlcmiEntry  
SEQUENCE    
  wfFrMapDlcmiIfIndex INTEGER
  wfFrMapDlcmiState INTEGER
  wfFrMapDlcmiAddress INTEGER
  wfFrMapDlcmiAddressLen INTEGER
  wfFrMapDlcmiPollingInterval INTEGER
  wfFrMapDlcmiFullEnquiryInterval INTEGER
  wfFrMapDlcmiErrorThreshold INTEGER
  wfFrMapDlcmiMonitoredEvents INTEGER
  wfFrMapDlcmiMaxSupportedVCs INTEGER
  wfFrMapDlcmiMulticast INTEGER
  wfFrMapDlcmiStatus INTEGER
  wfFrMapDlcmiRowStatus INTEGER
  wfFrMapDlcmiLineNumber INTEGER
  wfFrMapDlcmiLLIndex INTEGER

WfFrMapCircuitEntry  
SEQUENCE    
  wfFrMapCircuitIfIndex INTEGER
  wfFrMapCircuitDlci INTEGER
  wfFrMapCircuitState INTEGER
  wfFrMapCircuitReceivedFECNs Counter
  wfFrMapCircuitReceivedBECNs Counter
  wfFrMapCircuitSentFrames Counter
  wfFrMapCircuitSentOctets Counter
  wfFrMapCircuitReceivedFrames Counter
  wfFrMapCircuitReceivedOctets Counter
  wfFrMapCircuitCreationTime TimeTicks
  wfFrMapCircuitLastTimeChange TimeTicks
  wfFrMapCircuitCommittedBurst INTEGER
  wfFrMapCircuitExcessBurst INTEGER
  wfFrMapCircuitThroughput INTEGER
  wfFrMapCircuitMulticast INTEGER
  wfFrMapCircuitType INTEGER
  wfFrMapCircuitDiscards Counter
  wfFrMapCircuitReceivedDEs Counter
  wfFrMapCircuitSentDEs Counter
  wfFrMapCircuitLogicalIfIndex INTEGER
  wfFrMapCircuitRowStatus INTEGER
  wfFrMapCircuitLineNumber INTEGER
  wfFrMapCircuitLLIndex INTEGER

WfFrMapErrEntry  
SEQUENCE    
  wfFrMapErrIfIndex INTEGER
  wfFrMapErrType INTEGER
  wfFrMapErrData OCTET STRING
  wfFrMapErrTime TimeTicks
  wfFrMapErrFaults Counter
  wfFrMapErrFaultTime TimeTicks
  wfFrMapErrLineNumber INTEGER
  wfFrMapErrLLIndex INTEGER

Defined Values

wfFrIfDlcmiTable 1.3.6.1.4.1.18.3.5.9.9.1
The Parameters for the Data Link Connection Management Interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrIfDlcmiEntry

wfFrIfDlcmiEntry 1.3.6.1.4.1.18.3.5.9.9.1.1
The parameters for a particular Data Link Connection Management Interface
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrIfDlcmiEntry  

wfFrDlcmiDelete 1.3.6.1.4.1.18.3.5.9.9.1.1.1
Indication to delete this frame relay interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrDlcmiDisable 1.3.6.1.4.1.18.3.5.9.9.1.1.2
Indicates when a dlcmi entry is to be enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrDlcmiLineNumber 1.3.6.1.4.1.18.3.5.9.9.1.1.3
The line number on which this frame relay interface resides. This is the first of two instance identifiers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrDlcmiLLIndex 1.3.6.1.4.1.18.3.5.9.9.1.1.4
The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrDlcmiCircuit 1.3.6.1.4.1.18.3.5.9.9.1.1.5
The circuit number of this entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrDlcmiManagementType 1.3.6.1.4.1.18.3.5.9.9.1.1.6
This variable indicates which Data Link Connection Management scheme is active (and by implication, what DLCI it uses).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), lmi(2), t1617d(3), t1617b(4), annexa(5), lmiswitch(6), annexdswitch(7), annexaswitch(8)  

wfFrDlcmiStatus 1.3.6.1.4.1.18.3.5.9.9.1.1.7
Indicates the state of the interface. It is called status because this is what it was called in the rfc. FR_STATUS_RUNNING is the sate after the circuit is up (either LMI successful or there is no DLCMI and the system just comes up). FR_STATUS_FAULT is a transient state indicating that errors have caused the circuit to be disabled until DLCMI recovery. FR_STATUS_INITIALIZING is a transient state indicating that the interface is trying to come up. FR_STATUS_NOTPRESENT indicates that the interface is not present. Likely this will never be seen except upon initial configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), fault(2), init(3), notpresent(4)  

wfFrDlcmiAddress 1.3.6.1.4.1.18.3.5.9.9.1.1.8
This states which address format is in use on the FR interface. The default is Q922
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER q921(1), q922march90(2), q922november90(3), q922(4)  

wfFrDlcmiAddressLen 1.3.6.1.4.1.18.3.5.9.9.1.1.9
This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the address includeding the control portion.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER twobyte(2), threebyte(3), fourbyte(4)  

wfFrDlcmiPollingInterval 1.3.6.1.4.1.18.3.5.9.9.1.1.10
The number of seconds between successive status enquiry messages
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

wfFrDlcmiFullEnquiryInterval 1.3.6.1.4.1.18.3.5.9.9.1.1.11
The number of status enquiry intervals that pass before issuance of a full status enquiry message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

wfFrDlcmiErrorThreshold 1.3.6.1.4.1.18.3.5.9.9.1.1.12
This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..5000  

wfFrDlcmiMonitoredEvents 1.3.6.1.4.1.18.3.5.9.9.1.1.13
This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..5000  

wfFrDlcmiMaxSupportedVCs 1.3.6.1.4.1.18.3.5.9.9.1.1.14
The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. The system sets this initially.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrDlcmiVCsConfigured 1.3.6.1.4.1.18.3.5.9.9.1.1.15
The number of VCs that are presently configured on the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrDlcmiMulticast 1.3.6.1.4.1.18.3.5.9.9.1.1.16
This indicates whether the frame relay provider offers a multicast
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrDlcmiSeqCount 1.3.6.1.4.1.18.3.5.9.9.1.1.17
This station's sequence counter. It represents the next value to send.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrDlcmiLastReceived 1.3.6.1.4.1.18.3.5.9.9.1.1.18
The sequence number just received from the switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrDlcmiPassiveSeqCount 1.3.6.1.4.1.18.3.5.9.9.1.1.19
This station's sequence counter for answering status enquiry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrDlcmiPassiveReceived 1.3.6.1.4.1.18.3.5.9.9.1.1.20
The sequence number just received from the enquring station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrDlcmiPolls 1.3.6.1.4.1.18.3.5.9.9.1.1.21
This is the counter of where we are in the polling cycle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrDlcmiCongestionDisable 1.3.6.1.4.1.18.3.5.9.9.1.1.22
This indicates whether the VCs should use the congestion algorithm or not. Each VC may be configured to run the algorithm to override this setting. Those VCs which are configured via the DLCMI interface, will use this setting as their default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrDlcmiCongestionTmr 1.3.6.1.4.1.18.3.5.9.9.1.1.23
This is the time period over which congestion notifications are counted. It is also the period during which the VC will cease sending information before resuming transmission if no congestion notifications are received. The timer is kept in 1/2 second intervals.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER half(1), one(2), oneandhalf(3), two(4), twoandhalf(5), three(6), threeandhalf(7), four(8), fourandhalf(9), five(10)  

wfFrDlcmiCongestionCtr 1.3.6.1.4.1.18.3.5.9.9.1.1.24
This represents the number of congestion notifications, when received within wfFrDlcmiCongestionTmr time, will result in the VC ceasing transmissions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

wfFrErrType 1.3.6.1.4.1.18.3.5.9.9.1.1.25
Indicate the type of the last specific monitored error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), short(2), long(3), illegaldlci(4), unknowndlci(5), protoerr(6), unknownie(7), sequenceerr(8), unknownrpt(9), reset(10), cntrl(11)  

wfFrErrData 1.3.6.1.4.1.18.3.5.9.9.1.1.26
Contains as much of the error packet as possible.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wfFrErrTime 1.3.6.1.4.1.18.3.5.9.9.1.1.27
The time the last error occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrErrDiscards 1.3.6.1.4.1.18.3.5.9.9.1.1.28
The number of inbound frames dropped because of format or other errors or because the VC was not known.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrErrDrops 1.3.6.1.4.1.18.3.5.9.9.1.1.29
The number of outbound frames dropped. Usually this is due the specified DLCI being unknown or a broadcast packet is too long
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrErrFaults 1.3.6.1.4.1.18.3.5.9.9.1.1.30
The number of times that the Interface has come down due to errors since the system started. The value is reset when a restart parameter is modified.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrErrFaultTime 1.3.6.1.4.1.18.3.5.9.9.1.1.31
The time at which the interface last went down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrDlcmiDialFailureDisable 1.3.6.1.4.1.18.3.5.9.9.1.1.32
On a dial interface, this indicates whether to time-out if a full status message is not received. A timeout will cause the connection to terminate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrDlcmiInterfaceType 1.3.6.1.4.1.18.3.5.9.9.1.1.33
Indicates the type of interface this is. A normal interface is not backed up, a primary interface is backed up, and a backup interface is used for backup. backupDup is a cue for SiteManager.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), primary(2), backup(3), backupDup(4), demand(5)  

wfFrDlcmiBackupFilterCct 1.3.6.1.4.1.18.3.5.9.9.1.1.34
The circuit number which defines the ppq filters that the backup interface will use. If 0, the filters defined for the default/main circuit will be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrDlcmiDebugLevel 1.3.6.1.4.1.18.3.5.9.9.1.1.35
For Bay Networks internal use only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrDlcmiTraceLevel 1.3.6.1.4.1.18.3.5.9.9.1.1.36
For Bay Networks internal use only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrDlcmiCongestionMethod 1.3.6.1.4.1.18.3.5.9.9.1.1.37
Default congestion control method to use for all VCs on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER shutdown(1), throttle(2), throttleThenShutdown(3)  

wfFrDlcmiShapingTmr 1.3.6.1.4.1.18.3.5.9.9.1.1.38
The interval, in ticks (1/1024th of a second), that VCs are processed for traffic shaping.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8196  

wfFrDlcmiShapingHiQueueLimit 1.3.6.1.4.1.18.3.5.9.9.1.1.39
The total number of buffers that the interface will allow VCs to queue into the Hi queue. Divided by the number of traffic shaped VCs to get the number of buffers allowed per-VC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5000  

wfFrDlcmiShapingNormalQueueLimit 1.3.6.1.4.1.18.3.5.9.9.1.1.40
The total number of buffers that the interface will allow VCs to queue into the Normal queue. Divided by the number of traffic shaped VCs to get the number of buffers allowed per-VC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5000  

wfFrDlcmiShapingLoQueueLimit 1.3.6.1.4.1.18.3.5.9.9.1.1.41
The total number of buffers that the interface will allow VCs to queue into the Lo queue. Divided by the number of traffic shaped VCs to get the number of buffers allowed per-VC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5000  

wfFrDlcmiXoffDisable 1.3.6.1.4.1.18.3.5.9.9.1.1.42
Indicates whether to listen(enabled) or ignore(disabled) XOFF (R-bit) notification
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrDlcmiMissingPolls 1.3.6.1.4.1.18.3.5.9.9.1.1.43
Number of times there was no status enquiry response to a status enquiry
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrDlcmiName 1.3.6.1.4.1.18.3.5.9.9.1.1.44
User name for this interface, used by BCC
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrDlcmiEnableSinglePVCUpdate 1.3.6.1.4.1.18.3.5.9.9.1.1.45
Enables or disables the processing of Single Async PVC status messages that some switches use. If disabled, Single Async PVC status messages are ignored. All status changes in the FR circuit are based on the processing of full status enquiry response messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrDlcmiAnnexSwEnq 1.3.6.1.4.1.18.3.5.9.9.1.1.46
Enables or disables the processing of status enquiry on annexdswitch(7) and annexaswitch(8). If it is enabled and the status enquiry is not received from the DTE within wfFrDlcmiAnnexSwEnqTmr, the internal counter will be incremented. If internal counter exceeds wfFrDlcmiErrorThreshold, the circuit will be brought down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrDlcmiAnnexSwEnqTmr 1.3.6.1.4.1.18.3.5.9.9.1.1.47
Specify the timeout value in seconds for the status inquiry on annexdswitch(7) and annexaswitch(8). It is defaulted to 10 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

wfFrDlcmiExtraStatusInfoEnable 1.3.6.1.4.1.18.3.5.9.9.1.1.48
Indicates whether or not to process extra lmi ies that may received from the switch
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrVCircuitTable 1.3.6.1.4.1.18.3.5.9.9.2
Frame Relay Circuit table gives information about a virtual circuits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrVCircuitEntry

wfFrVCircuitEntry 1.3.6.1.4.1.18.3.5.9.9.2.1
An entry in the Frame Relay Circuit table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrVCircuitEntry  

wfFrCircuitDelete 1.3.6.1.4.1.18.3.5.9.9.2.1.1
Indication to delete this frame relay interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrCircuitLineNumber 1.3.6.1.4.1.18.3.5.9.9.2.1.2
Instance identifier. This is the line number on which the associated Frame Relay interface resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrCircuitLLIndex 1.3.6.1.4.1.18.3.5.9.9.2.1.3
The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrCircuitNumber 1.3.6.1.4.1.18.3.5.9.9.2.1.4
The circuit number of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrCircuitDlci 1.3.6.1.4.1.18.3.5.9.9.2.1.5
One of three instance identifier. This is the Frame Relay 'address' of the virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER twobyteminimum(16), twobytemaximum(1007), threebyteminimum(1024), threebytemaximum(64511), fourbyteminimum(131072), fourbytemaximum(8257535)  

wfFrCircuitState 1.3.6.1.4.1.18.3.5.9.9.2.1.6
Indicates the state of the particular virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), active(2), inactive(3), xoff(4), control(5), starting(6), disabled(7)  

wfFrCircuitStateSet 1.3.6.1.4.1.18.3.5.9.9.2.1.7
User access for setting the state of a virtual circuit
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), active(2), inactive(3), disabled(7)  

wfFrCircuitReceivedFECNs 1.3.6.1.4.1.18.3.5.9.9.2.1.8
Number of frames received indicating forward congestion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitReceivedBECNs 1.3.6.1.4.1.18.3.5.9.9.2.1.9
Number of frames received indicating backward congestion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitSentFrames 1.3.6.1.4.1.18.3.5.9.9.2.1.10
The number of frames sent from this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitSentOctets 1.3.6.1.4.1.18.3.5.9.9.2.1.11
The number of octets sent from this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitReceivedFrames 1.3.6.1.4.1.18.3.5.9.9.2.1.12
The number of frames received from this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitReceivedOctets 1.3.6.1.4.1.18.3.5.9.9.2.1.13
The number of octets received from this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitCreationTime 1.3.6.1.4.1.18.3.5.9.9.2.1.14
The value of sysUpTime when the vc was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrCircuitLastTimeChange 1.3.6.1.4.1.18.3.5.9.9.2.1.15
The value of sysUpTime when last there was a change in vc state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrCircuitCommittedBurst 1.3.6.1.4.1.18.3.5.9.9.2.1.16
Indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrCircuitExcessBurst 1.3.6.1.4.1.18.3.5.9.9.2.1.17
Indicates teh maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrCircuitThroughput 1.3.6.1.4.1.18.3.5.9.9.2.1.18
This is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrCircuitMulticast 1.3.6.1.4.1.18.3.5.9.9.2.1.19
Indicates whether this DLCI is used for multicast or single destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unicast(1), multicast(2)  

wfFrCircuitType 1.3.6.1.4.1.18.3.5.9.9.2.1.20
Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2), dynamicsvc(3)  

wfFrCircuitDiscards 1.3.6.1.4.1.18.3.5.9.9.2.1.21
The number of inbound frames discarded because of format errors, because the VC is inactive or because the protocol was not registered for this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitDrops 1.3.6.1.4.1.18.3.5.9.9.2.1.22
Indicates how many outbound frames were dropped. Usually these are dropped because the VC is not active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitSubCct 1.3.6.1.4.1.18.3.5.9.9.2.1.23
Circuit number to use for this VC when configured in hybrid (for bridging) or direct access (VC as a circuit) mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrCircuitMode 1.3.6.1.4.1.18.3.5.9.9.2.1.24
The mode of the given VC. GROUP - treats the VC as one of many vc's on a circuit. HYBRID - treats the VC as one of many vc's on a circuit for protocol traffic, but as a separate circuit for bridging. DIRECT - treats the VC as a separate circuit for all applications.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER group(1), hybrid(2), direct(3)  

wfFrCircuitCongestionDisable 1.3.6.1.4.1.18.3.5.9.9.2.1.25
This indicates whether the congestion algorithm should be used for this VC. If this is not set, the value is inherited from the DLCMI record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), inherit(3)  

wfFrCircuitCongestionState 1.3.6.1.4.1.18.3.5.9.9.2.1.26
This is used to indicate whether or not the VC is in a congested state. If it is, no traffic will be sent on this VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER forwarding(1), congested(2), throttling(3)  

wfFrCircuitCongestionTmr 1.3.6.1.4.1.18.3.5.9.9.2.1.27
This is the time period over which congestion notifications are counted. It is also the period during which the VC will cease sending information before resuming transmission if no congestion notifications are received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER half(1), one(2), oneandhalf(3), two(4), twoandhalf(5), three(6), threeandhalf(7), four(8), fourandhalf(9), five(10)  

wfFrCircuitCongestionCtr 1.3.6.1.4.1.18.3.5.9.9.2.1.28
This represents the number of congestion notifications, when received within wfFrCircuitCongestionTmr time, that will result in the VC ceasing transmissions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

wfFrCircuitWcpEnable 1.3.6.1.4.1.18.3.5.9.9.2.1.29
Enable Compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrCircuitPrimaryHoldTmr 1.3.6.1.4.1.18.3.5.9.9.2.1.30
The maximum number of seconds that a Frame Relay PVC Primary will be kept inactive, ignoring status messages, when it is terminated because the backup has started.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrCircuitInactivityTimer 1.3.6.1.4.1.18.3.5.9.9.2.1.31
Inactivity Timer for SVCs. Zero disables timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrCircuitInactivityMode 1.3.6.1.4.1.18.3.5.9.9.2.1.32
Specifies which packets will reset the SVC inactivity timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bothdirections(1), transmitonly(2), receiveonly(3), eitherdirection(4)  

wfFrCircuitCongestionMethod 1.3.6.1.4.1.18.3.5.9.9.2.1.33
The congestion method to use on this VC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER shutdown(1), throttle(2), throttleThenShutdown(3), inherit(4)  

wfFrCircuitShapedHiXmits 1.3.6.1.4.1.18.3.5.9.9.2.1.34
Same as wfCctOptsEntry.wfCctOptsHiXmits for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedNormalXmits 1.3.6.1.4.1.18.3.5.9.9.2.1.35
Same as wfCctOptsEntry.wfCctOptsNormalXmits for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedLoXmits 1.3.6.1.4.1.18.3.5.9.9.2.1.36
Same as wfCctOptsEntry.wfCctOptsLoXmits for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedHiClippedPkts 1.3.6.1.4.1.18.3.5.9.9.2.1.37
Same as wfCctOptsEntry.wfCctOptsHiClippedPkts for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedNormalClippedPkts 1.3.6.1.4.1.18.3.5.9.9.2.1.38
Same as wfCctOptsEntry.wfCctOptsNormalClippedPkts for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedLoClippedPkts 1.3.6.1.4.1.18.3.5.9.9.2.1.39
Same as wfCctOptsEntry.wfCctOptsLoClippedPkts for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedHiQHighWaterPkts 1.3.6.1.4.1.18.3.5.9.9.2.1.40
Same as wfCctOptsEntry.wfCctOptsHiQHighWaterPkts for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrCircuitShapedNormalQHighWaterPkts 1.3.6.1.4.1.18.3.5.9.9.2.1.41
Same as wfCctOptsEntry.wfCctOptsNormalQHighWaterPkts for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrCircuitShapedLoQHighWaterPkts 1.3.6.1.4.1.18.3.5.9.9.2.1.42
Same as wfCctOptsEntry.wfCctOptsLoQHighWaterPkts for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrCircuitShapedDroppedPkts 1.3.6.1.4.1.18.3.5.9.9.2.1.43
Same as wfCctOptsEntry.wfCctOptsDroppedPkts for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedLargePkts 1.3.6.1.4.1.18.3.5.9.9.2.1.44
Same as wfCctOptsEntry.wfCctOptsLargePkts for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedHiTotalOctets 1.3.6.1.4.1.18.3.5.9.9.2.1.45
Same as wfCctOptsEntry.wfCctOptsHiTotalOctets for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedNormalTotalOctets 1.3.6.1.4.1.18.3.5.9.9.2.1.46
Same as wfCctOptsEntry.wfCctOptsNormalTotalOctets for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedLoTotalOctets 1.3.6.1.4.1.18.3.5.9.9.2.1.47
Same as wfCctOptsEntry.wfCctOptsLoTotalOctets for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedPktsNotQueued 1.3.6.1.4.1.18.3.5.9.9.2.1.48
Same as wfCctOptsEntry.wfCctOptsPktsNotQueued for this VC
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitShapedHighWaterPktsClear 1.3.6.1.4.1.18.3.5.9.9.2.1.49
Same as wfCctOptsEntry.wfCctOptsHighWaterPktsClear for this VC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrCircuitShapedHiQueueLimit 1.3.6.1.4.1.18.3.5.9.9.2.1.50
Same as wfCctOptsEntry.wfCctOptsHighPriorityQueueLimit for this VC. If set to inherit (0), then the VC uses part of the global allocation of buffers in the DLCMI entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5000  

wfFrCircuitShapedNormalQueueLimit 1.3.6.1.4.1.18.3.5.9.9.2.1.51
Same as wfCctOptsEntry.wfCctOptsNormalPriorityQueueLimit for this VC. If set to inherit (0), then the VC uses part of the global allocation of buffers in the DLCMI entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5000  

wfFrCircuitShapedLoQueueLimit 1.3.6.1.4.1.18.3.5.9.9.2.1.52
Same as wfCctOptsEntry.wfCctOptsLowPriorityQueueLimit for this VC. If set to inherit (0), then the VC uses part of the global allocation of buffers in the DLCMI entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5000  

wfFrCircuitStartupDelay 1.3.6.1.4.1.18.3.5.9.9.2.1.53
Number of seconds the VC should wait before creating the circuit or doing a dp_vc_line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrCircuitCurHiQueueLimit 1.3.6.1.4.1.18.3.5.9.9.2.1.54
This is the current high queue limit, based on the VC and DLCMI configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrCircuitCurNormalQueueLimit 1.3.6.1.4.1.18.3.5.9.9.2.1.55
This is the current normal queue limit, based on the VC and DLCMI configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrCircuitCurLoQueueLimit 1.3.6.1.4.1.18.3.5.9.9.2.1.56
This is the current low queue limit, based on the VC and DLCMI configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrCircuitShapingState 1.3.6.1.4.1.18.3.5.9.9.2.1.57
Indicates current state of a VCs traffic shaping configuration
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), invalid(2), committed-shaping(3), excess-shaping(4), zero-cir(5)  

wfFrCircuitBwThreshold 1.3.6.1.4.1.18.3.5.9.9.2.1.58
Set 3 to 10 times of the CIR configured with this PVC. The threshold value for starting to send Normal and Low Priority traffic is calculated based on physical line speed. Setting this object to 3 to 10 times of CIR value will provide more chance to the Normal and Low Priority traffic so that it will help the Normal and Low Priority traffic of low speed links over high speed physical line from starvation such as 56Kbps and 65Kbps lines over HSSI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrCircuitReceivedDEs 1.3.6.1.4.1.18.3.5.9.9.2.1.59
Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCircuitSentDEs 1.3.6.1.4.1.18.3.5.9.9.2.1.60
Number of frames sent from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of ther frames sent without the DE bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCctErrorTable 1.3.6.1.4.1.18.3.5.9.9.4
The Frame Relay Circuit Error Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrCctErrorEntry

wfFrCctErrorEntry 1.3.6.1.4.1.18.3.5.9.9.4.1
An entry in the Frame Relay Circuit Error table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrCctErrorEntry  

wfFrCctErrorCct 1.3.6.1.4.1.18.3.5.9.9.4.1.1
Instance Identifier - indicates the frame relay circuit number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrCctErrorDrops 1.3.6.1.4.1.18.3.5.9.9.4.1.2
Indicates the number of frames that were dropped at the circuit level. Generally this is because the particular protocol (within the inbound frame) was not registered for this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrCctErrorDiscards 1.3.6.1.4.1.18.3.5.9.9.4.1.3
Indicates the number of frames that were discarded at the circuit level. Generally this is because the outbound frame was too long, or too short.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrServiceRecordTable 1.3.6.1.4.1.18.3.5.9.9.5
Frame Relay service records group virtual circuits together.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrServiceRecordEntry

wfFrServiceRecordEntry 1.3.6.1.4.1.18.3.5.9.9.5.1
An entry in the Frame Relay Service Record table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrServiceRecordEntry  

wfFrServiceRecordDelete 1.3.6.1.4.1.18.3.5.9.9.5.1.1
Indication to delete this frame relay service record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrServiceRecordLineNumber 1.3.6.1.4.1.18.3.5.9.9.5.1.2
Instance identifier. This is the line number on which the associated Frame Relay interface resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordLLIndex 1.3.6.1.4.1.18.3.5.9.9.5.1.3
The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordCircuitNumber 1.3.6.1.4.1.18.3.5.9.9.5.1.4
The circuit number of this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordDefaultFlag 1.3.6.1.4.1.18.3.5.9.9.5.1.5
Identifies default service record for VCs added via the frame relay switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

wfFrServiceRecordNumberVCs 1.3.6.1.4.1.18.3.5.9.9.5.1.6
Number of virtual circuit associated with a service record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordName 1.3.6.1.4.1.18.3.5.9.9.5.1.7
User name for circuit
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrServiceRecordState 1.3.6.1.4.1.18.3.5.9.9.5.1.8
Used to identify new service record instances
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2), invalid(3)  

wfFrServiceRecordPreMultiCircuit 1.3.6.1.4.1.18.3.5.9.9.5.1.9
circuit number prior to enabling multiline, allows restoration of pre-multiline circuit
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordBackupFilterCct 1.3.6.1.4.1.18.3.5.9.9.5.1.10
The circuit number used by the backup interface to store/define the ppq filter configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordBackupLineNumber 1.3.6.1.4.1.18.3.5.9.9.5.1.11
Indicates one of the backup interfaces for this primary interface. The circuit on this service record should be shared onto that backup interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordBackupLLIndex 1.3.6.1.4.1.18.3.5.9.9.5.1.12
Indicates one of the backup interfaces for this primary interface. The circuit on this service record should be shared onto that backup interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordBackupMainCct 1.3.6.1.4.1.18.3.5.9.9.5.1.13
Indicates the main circuit of one of the backup interfaces for this primary interface. The circuit on this service record should be shared onto that backup interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordPrimaryLineNumber 1.3.6.1.4.1.18.3.5.9.9.5.1.14
Indicates the primary interface for this backup interface This should be set only in the Default Service Record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordPrimaryLLIndex 1.3.6.1.4.1.18.3.5.9.9.5.1.15
Indicates the primary interface for this backup interface. This should be set only in the Default Service Record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordPrimaryMainCct 1.3.6.1.4.1.18.3.5.9.9.5.1.16
Indicates the main circuit on the primary interface for this backup interface. This should be set only in the Default Service Record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordSVCDisable 1.3.6.1.4.1.18.3.5.9.9.5.1.17
Allow SVCs on this service record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrServiceRecordSVCLocNum 1.3.6.1.4.1.18.3.5.9.9.5.1.18
Number associated with this service record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrServiceRecordSVCLocSubAdr 1.3.6.1.4.1.18.3.5.9.9.5.1.19
Subaddress of type NSAP (Q.931) further qualifies number
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrServiceRecordSVCLocPlan 1.3.6.1.4.1.18.3.5.9.9.5.1.20
Supported Q.931 4.3.8/4.3.10 numbering plans. Each plan is represented by the 4 least significant bits to align with the values stated in Q.931.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e164(1), x121(3)  

wfFrServiceRecordSVCLocTypeNum 1.3.6.1.4.1.18.3.5.9.9.5.1.21
Supported Q.931 4.3.8/4.3.10 types of number. Each type is represented by a value one greater than the values stated in Q.931.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), international(2)  

wfFrServiceRecordSVCCallBlock 1.3.6.1.4.1.18.3.5.9.9.5.1.22
Allow all calls, block inbound, block outbound, block all calls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), inbound(2), outbound(3), all(4)  

wfFrServiceRecordSVCInScrnDisable 1.3.6.1.4.1.18.3.5.9.9.5.1.23
Enable SVC call screening.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrServiceRecordSVCInScrnUsage 1.3.6.1.4.1.18.3.5.9.9.5.1.24
Type of SVC call screening.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER include(1), exclude(2)  

wfFrServiceRecordSVCInactTimer 1.3.6.1.4.1.18.3.5.9.9.5.1.25
Inactivity Timer for SVCs. Zero disables timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrServiceRecordSVCInactMode 1.3.6.1.4.1.18.3.5.9.9.5.1.26
Inactivity check mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bothdirections(1), transmitonly(2), receiveonly(3), eitherdirection(4)  

wfFrServiceRecordNumberStaticVCs 1.3.6.1.4.1.18.3.5.9.9.5.1.27
Number of static vcs associated with a service record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordNumberDynamicVCs 1.3.6.1.4.1.18.3.5.9.9.5.1.28
Number of dynamic vcs associated with a service record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordNumberSVCs 1.3.6.1.4.1.18.3.5.9.9.5.1.29
Number of svcs associated with a service record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordNumberActiveVCs 1.3.6.1.4.1.18.3.5.9.9.5.1.30
Number of active vcs associated with a service record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrServiceRecordifLastChange 1.3.6.1.4.1.18.3.5.9.9.5.1.31
The value of sysUpTime when last there was a change in a vc state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrServiceRecordifInOctets 1.3.6.1.4.1.18.3.5.9.9.5.1.32
The number of octets received from virtual circuits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrServiceRecordifInDiscards 1.3.6.1.4.1.18.3.5.9.9.5.1.33
The number of inbound frames discarded because of format errors, because a VC is inactive or because the protocol was not registered for this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrServiceRecordifOutOctets 1.3.6.1.4.1.18.3.5.9.9.5.1.34
The number of octets sent from virtual circuits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrServiceRecordifOutDiscards 1.3.6.1.4.1.18.3.5.9.9.5.1.35
Indicates how many outbound frames were dropped. Usually these are dropped because a VC is not active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrServiceRecordifOutCtrlPkts 1.3.6.1.4.1.18.3.5.9.9.5.1.36
The number of dlcmi frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrServiceRecordifInCtrlPkts 1.3.6.1.4.1.18.3.5.9.9.5.1.37
The number of dlcmi frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSigTable 1.3.6.1.4.1.18.3.5.9.9.6
The MIB Table for Frame Relay Signalling
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSigEntry

wfFrSigEntry 1.3.6.1.4.1.18.3.5.9.9.6.1
The entry of FR Signalling MIB table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSigEntry  

wfFrSigDelete 1.3.6.1.4.1.18.3.5.9.9.6.1.1
Delete FR Signalling on this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSigDisable 1.3.6.1.4.1.18.3.5.9.9.6.1.2
Disable FR Sig on this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSigLineNumber 1.3.6.1.4.1.18.3.5.9.9.6.1.3
Logical Line number. This attribute is Instance Id 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSigLLIndex 1.3.6.1.4.1.18.3.5.9.9.6.1.4
Lower Layer Index. This attribute is Instance Id 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSigStatus 1.3.6.1.4.1.18.3.5.9.9.6.1.5
Frame Relay Signalling Status This is also Q.933 Layer Status. STATUS_RUNNING FR Signalling state machine is ready. STATUS_FAULT FR Signalling is in a non-operative state. STATUS_INIT FR Signalling is initializing. STATUS_NOTPRESENT FR Signalling is not started yet. This value is not likely except upon initial configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), fault(2), init(3), notpresent(4)  

wfFrSigCircuit 1.3.6.1.4.1.18.3.5.9.9.6.1.6
Circuit number of the FR Signaling Stack (needed?)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrSigConformance 1.3.6.1.4.1.18.3.5.9.9.6.1.7
Q.933 Standard Conformance Selection FRF4 Frame Relay Forum Implementation Agreement FRF.4 FRF4_PRIORITY FRF.4 plus support of X.213 Priority Q933 ITU Q.933, 03/1993 - currently not implemented ANSI_T1617 ANSI T1.617 - currently not implemented
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER frf4(1), priority(2), q933(3), t1617(4)  

wfFrSigSvcIdleTimer 1.3.6.1.4.1.18.3.5.9.9.6.1.8
SVC Idle timeout value Number of seconds in which SVCs are not passing data before considered 'idle'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(10), default(360), max(14400)  

wfFrSigMaxSvcs 1.3.6.1.4.1.18.3.5.9.9.6.1.9
Max number of SVC allowed on this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(1), default(16), max(1024)  

wfFrSigSvcDeletePolicy 1.3.6.1.4.1.18.3.5.9.9.6.1.10
SVC Deletion Policy ALWAYS always delete idle SVCs HEAVY_USE delete idle SVCs when 85% of Max SVCs are open NEVER never delete idle SVCs
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always(1), use(2), never(3)  

wfFrSigSvcReplacePolicy 1.3.6.1.4.1.18.3.5.9.9.6.1.11
SVC Replacement Policy ALWAYS replace an SVC of an equal or lower priority IDLE replace an SVC of an equal or lower priority only if it is idle NEVER never replace an SVC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always(1), idle(2), never(3)  

wfFrSigT303 1.3.6.1.4.1.18.3.5.9.9.6.1.12
T303 - SETUP msg timer value in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(1), default(4), max(120)  

wfFrSigT305 1.3.6.1.4.1.18.3.5.9.9.6.1.13
T305 - DISCONNECT timer value
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(1), default(30), max(120)  

wfFrSigT308 1.3.6.1.4.1.18.3.5.9.9.6.1.14
T308 - RELEASE timer value
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(1), default(4), max(120)  

wfFrSigT310 1.3.6.1.4.1.18.3.5.9.9.6.1.15
T310 - CALL PROCEEDING timer value Q.931 specifies a default of 30-120 seconds for this timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(1), default(30), max(120)  

wfFrSigT322 1.3.6.1.4.1.18.3.5.9.9.6.1.16
T322 - STATUS ENQUIRY timer value
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(1), default(4), max(120)  

wfFrSigN322 1.3.6.1.4.1.18.3.5.9.9.6.1.17
Number of times STATUS ENQUIRY is retransmitted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER min(1), max(100)  

wfFrSigNumMaxSVCs 1.3.6.1.4.1.18.3.5.9.9.6.1.18
Maximum number of SVCs currently in active state
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSigNumConnRej 1.3.6.1.4.1.18.3.5.9.9.6.1.19
Number of SVC creation attempts which were rejected by Switch
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSigNumSvcRej 1.3.6.1.4.1.18.3.5.9.9.6.1.20
Number of SVC setup attempts which were rejected by this router
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSigNumSvcFailed 1.3.6.1.4.1.18.3.5.9.9.6.1.21
Number of SVC setup attempts which failed due to errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrLapfTable 1.3.6.1.4.1.18.3.5.9.9.7
The MIB Table for Frame Relay LAPF
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrLapfEntry

wfFrLapfEntry 1.3.6.1.4.1.18.3.5.9.9.7.1
The entry of FR LAPF MIB table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrLapfEntry  

wfLapfDelete 1.3.6.1.4.1.18.3.5.9.9.7.1.1
Delete LAPF on this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfLapfDisable 1.3.6.1.4.1.18.3.5.9.9.7.1.2
Disable Lapf on this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfLapfLineNumber 1.3.6.1.4.1.18.3.5.9.9.7.1.3
Logical Line number. This attribute is Instance Id 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapfLLIndex 1.3.6.1.4.1.18.3.5.9.9.7.1.4
Lower Layer Index. This attribute is Instance Id 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapfStatus 1.3.6.1.4.1.18.3.5.9.9.7.1.5
Status of LAPF Data Link Control STATUS_RUNNING LAPF layer is ready and responsive. STATUS_FAULT LAPF layer is in a non-operative state. STATUS_INIT LAPF layer is initializing. STATUS_NOTPRESENT LAPF layer is not started yet. This value is not likely except upon initial configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), fault(2), init(3), notpresent(4)  

wfLapfStationType 1.3.6.1.4.1.18.3.5.9.9.7.1.6
Identifies the desired station type of this interface. LAPF_USERSIDE LAPF acts as the User-side (DTE) LAPF_NETWORKSIDE LAPF acts as the Network-side (DCE)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER networkside(1), userside(2)  

wfLapfActionInitiate 1.3.6.1.4.1.18.3.5.9.9.7.1.7
This identifies the action LAPF will take to initiate link set-up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

wfLapfT200 1.3.6.1.4.1.18.3.5.9.9.7.1.8
T200 - LAPF Base timer value, in tenths of a second
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1200  

wfLapfT203 1.3.6.1.4.1.18.3.5.9.9.7.1.9
T203 - LAPF idle timer value, in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

wfLapfN200 1.3.6.1.4.1.18.3.5.9.9.7.1.10
N200 - Max number of LAPF retransmissions
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

wfLapfN201 1.3.6.1.4.1.18.3.5.9.9.7.1.11
N201 - Max number of octets in LAPF Information field
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 260..2052  

wfLapfK 1.3.6.1.4.1.18.3.5.9.9.7.1.12
k - Max number of outstanding I-frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

wfLapfRxWin 1.3.6.1.4.1.18.3.5.9.9.7.1.13
Current receive window size
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapfTxWin 1.3.6.1.4.1.18.3.5.9.9.7.1.14
Current transmit window size
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapfSABMESent 1.3.6.1.4.1.18.3.5.9.9.7.1.15
number of SABME sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfSABMERcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.16
number of SABME received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfUASent 1.3.6.1.4.1.18.3.5.9.9.7.1.17
number of UA sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfUARcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.18
number of UA received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfDISCSent 1.3.6.1.4.1.18.3.5.9.9.7.1.19
number of DISC sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfDISCRcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.20
number of DISC received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfDMSent 1.3.6.1.4.1.18.3.5.9.9.7.1.21
number of DM sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfDMRcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.22
number of DM received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfFRMRSent 1.3.6.1.4.1.18.3.5.9.9.7.1.23
number of FRMR sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfFRMRRcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.24
number of FRMR received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfRNRsSent 1.3.6.1.4.1.18.3.5.9.9.7.1.25
number of RNR frames received since link is up
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfRNRsRcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.26
number of RNR frames sent since link is up
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfREJsSent 1.3.6.1.4.1.18.3.5.9.9.7.1.27
number of REJ frames received since link is up
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfREJsRcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.28
number of REJ frames sent since link is up
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfIFramesSent 1.3.6.1.4.1.18.3.5.9.9.7.1.29
number of I-frames received since last link establishment
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfIFramesRcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.30
number of I-frames sent since last link establishment
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfUISent 1.3.6.1.4.1.18.3.5.9.9.7.1.31
number of un-numbered I-frames received since last link establishment
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfUIRcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.32
number of un-numbered I-frames sent since last link establishment
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfRRsSent 1.3.6.1.4.1.18.3.5.9.9.7.1.33
number of RR frames sent since link is up
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfRRsRcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.34
number of RR frames received since link is up
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfXIDSent 1.3.6.1.4.1.18.3.5.9.9.7.1.35
number of XID sent
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfXIDRcvd 1.3.6.1.4.1.18.3.5.9.9.7.1.36
number of XID received
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfT200Timeouts 1.3.6.1.4.1.18.3.5.9.9.7.1.37
number of T200 Time-out that occured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfT203Timeouts 1.3.6.1.4.1.18.3.5.9.9.7.1.38
number of T203 time-out that occured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfN200Exceeded 1.3.6.1.4.1.18.3.5.9.9.7.1.39
number of N200 being exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapfN201Error 1.3.6.1.4.1.18.3.5.9.9.7.1.40
number of N201 error occured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigTable 1.3.6.1.4.1.18.3.5.9.9.9
The MIB Table for FRF4 SVC Signalling
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrFRF4SigEntry

wfFrFRF4SigEntry 1.3.6.1.4.1.18.3.5.9.9.9.1
The entry of FRF4 SVC Signalling MIB table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrFRF4SigEntry  

wfFrFRF4SigDelete 1.3.6.1.4.1.18.3.5.9.9.9.1.1
Delete FRF4 SVC Signalling on this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrFRF4SigDisable 1.3.6.1.4.1.18.3.5.9.9.9.1.2
Disable FRF4 SVC Signalling on this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrFRF4SigLineNumber 1.3.6.1.4.1.18.3.5.9.9.9.1.3
Logical Line number. This attribute is Instance Id 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrFRF4SigLLIndex 1.3.6.1.4.1.18.3.5.9.9.9.1.4
Lower Layer Index. This attribute is Instance Id 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrFRF4SigMaxSvcs 1.3.6.1.4.1.18.3.5.9.9.9.1.5
Maximum number of SVCs for this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrFRF4SigT303 1.3.6.1.4.1.18.3.5.9.9.9.1.6
Timer number: T303 default time-out: 4 s state of call: call present cause for start: outgoing setup normal stop: incoming connect/call-proceeding/ release-complete at the first expiry: retransmit setup, restart T303 at the second expiry: clear call
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..90  

wfFrFRF4SigT305 1.3.6.1.4.1.18.3.5.9.9.9.1.7
Timer number: T305 default time-out: 30 s state of call: disconnect ind cause for start: outgoing disconnect normal stop: incoming release/disconnect at the first expiry: outgoing release at the second expiry: timer not restarted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 20..90  

wfFrFRF4SigT308 1.3.6.1.4.1.18.3.5.9.9.9.1.8
Timer number: T308 default time-out: 4 s state of call: release req cause for start: outgoing release normal stop: incoming release/release-complete at the first expiry: retransmit release, restart T308 at the second expiry: place access channel in maintenance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..90  

wfFrFRF4SigT310 1.3.6.1.4.1.18.3.5.9.9.9.1.9
Timer number: T310 default time-out: 10 s state of call: incoming call proceeding cause for start: incoming call proceeding normal stop: incoming connect/disconnect at the first expiry: clear call at the second expiry: timer not restarted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..90  

wfFrFRF4SigT322 1.3.6.1.4.1.18.3.5.9.9.9.1.10
Timer number: T322 default time-out: 4 s state of call: any call state cause for start: outgoing status enquiry normal stop: incoming status/disconnect/ release/release-complete at the first expiry: resend status-enq, restart T322 at the next expiry: if (--N322 > 0), resend status enq and restart T322
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..90  

wfFrFRF4SigN322 1.3.6.1.4.1.18.3.5.9.9.9.1.11
Number of times STATUS ENQUIRY is retransmitted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

wfFrFRF4SigFramesSent 1.3.6.1.4.1.18.3.5.9.9.9.1.12
Number of frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigOctetsSent 1.3.6.1.4.1.18.3.5.9.9.9.1.13
Number of octets transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigFramesReceived 1.3.6.1.4.1.18.3.5.9.9.9.1.14
Number of frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigOctetsReceived 1.3.6.1.4.1.18.3.5.9.9.9.1.15
Number of octets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigFramesDropped 1.3.6.1.4.1.18.3.5.9.9.9.1.16
Number of frames dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigFramesDiscarded 1.3.6.1.4.1.18.3.5.9.9.9.1.17
Number of frames discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigSetupRx 1.3.6.1.4.1.18.3.5.9.9.9.1.18
Number of SETUP frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigCallProcRx 1.3.6.1.4.1.18.3.5.9.9.9.1.19
Number of CALL PROCEEDING frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigConnectRx 1.3.6.1.4.1.18.3.5.9.9.9.1.20
Number of CONNECT frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigDisconnectRx 1.3.6.1.4.1.18.3.5.9.9.9.1.21
Number of DISCONNECT frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigReleaseRx 1.3.6.1.4.1.18.3.5.9.9.9.1.22
Number of RELEASE frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigReleaseCompleteRx 1.3.6.1.4.1.18.3.5.9.9.9.1.23
Number of RELEASE COMPLETE frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigStatusRx 1.3.6.1.4.1.18.3.5.9.9.9.1.24
Number of STATUS frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigStatusEnquiryRx 1.3.6.1.4.1.18.3.5.9.9.9.1.25
Number of STATUS ENQUIRY frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigSetupTx 1.3.6.1.4.1.18.3.5.9.9.9.1.26
Number of SETUP frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigCallProcTx 1.3.6.1.4.1.18.3.5.9.9.9.1.27
Number of CALL PROCEEDING frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigConnectTx 1.3.6.1.4.1.18.3.5.9.9.9.1.28
Number of CONNECT frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigDisconnectTx 1.3.6.1.4.1.18.3.5.9.9.9.1.29
Number of DISCONNECT frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigReleaseTx 1.3.6.1.4.1.18.3.5.9.9.9.1.30
Number of RELEASE frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigReleaseCompleteTx 1.3.6.1.4.1.18.3.5.9.9.9.1.31
Number of RELEASE COMPLETE frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigStatusTx 1.3.6.1.4.1.18.3.5.9.9.9.1.32
Number of STATUS frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrFRF4SigStatusEnquiryTx 1.3.6.1.4.1.18.3.5.9.9.9.1.33
Number of STATUS ENQUIRY frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrSVCOptionsTable 1.3.6.1.4.1.18.3.5.9.9.10
The MIB Table for FRF4 SVC Signalling options
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSVCOptionsEntry

wfFrSVCOptionsEntry 1.3.6.1.4.1.18.3.5.9.9.10.1
The entry of FRF4 SVC Signalling options MIB table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSVCOptionsEntry  

wfFrSVCOptionsDelete 1.3.6.1.4.1.18.3.5.9.9.10.1.1
Delete SVC options record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSVCOptionsDisable 1.3.6.1.4.1.18.3.5.9.9.10.1.2
Disable use of SVC options record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSVCOptionsLineNumber 1.3.6.1.4.1.18.3.5.9.9.10.1.3
Logical Line number. This attribute is Instance Id 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCOptionsLLIndex 1.3.6.1.4.1.18.3.5.9.9.10.1.4
Lower Layer Index. This attribute is Instance Id 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCOptionsCircuitNumber 1.3.6.1.4.1.18.3.5.9.9.10.1.5
Circuit number. This attribute is Instance Id 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCOptionsInstanceIndex 1.3.6.1.4.1.18.3.5.9.9.10.1.6
Instance index assigned by Site Manager. This attribute is Instance Id 4
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCOptionsRemNum 1.3.6.1.4.1.18.3.5.9.9.10.1.7
Configured options apply to this number
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrSVCOptionsRemSubAdr 1.3.6.1.4.1.18.3.5.9.9.10.1.8
Subaddress of type NSAP (Q.931) further qualifies number
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrSVCOptionsRemPlan 1.3.6.1.4.1.18.3.5.9.9.10.1.9
Supported Q.931 4.3.8/4.3.10 numbering plans. Each plan is represented by the 4 least significant bits to align with the values stated in Q.931.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e164(1), x121(3)  

wfFrSVCOptionsRemTypeNum 1.3.6.1.4.1.18.3.5.9.9.10.1.10
Supported Q.931 4.3.8/4.3.10 types of number. Each type is represented by a value one greater than the values stated in Q.931.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), international(2)  

wfFrSVCOptionsBroadcastDisable 1.3.6.1.4.1.18.3.5.9.9.10.1.11
Add this number to the SVC broadcast domain
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSVCOptionsInactTimer 1.3.6.1.4.1.18.3.5.9.9.10.1.12
Amount of time (in seconds) to wait for packets before disconnecting the SVC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSVCOptionsInactMode 1.3.6.1.4.1.18.3.5.9.9.10.1.13
Inactivity check mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bothdirections(1), transmitonly(2), receiveonly(3), eitherdirection(4)  

wfFrSVCOptionsX213DataPriority 1.3.6.1.4.1.18.3.5.9.9.10.1.14
The priority of data on the network connection as defined in Q.933 and X.213. Each priority is the numerical value associated with said priority in Q.933
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

wfFrSVCOptionsX213DataLQAPriority 1.3.6.1.4.1.18.3.5.9.9.10.1.15
The lowest quality acceptable (LQA) priority of data on the network connection as defined in Q.933 and X.213. Each priority is the numerical value associated with said priority in Q.933
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

wfFrSVCOptionsX213GainPriority 1.3.6.1.4.1.18.3.5.9.9.10.1.16
The priority to gain a network connection as defined in Q.933 and X.213. Each priority is the numerical value associated with said priority in Q.933
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

wfFrSVCOptionsX213GainLQAPriority 1.3.6.1.4.1.18.3.5.9.9.10.1.17
The lowest quality acceptable (LQA) priority to gain a network connection as defined in Q.933 and X.213. Each priority is the numerical value associated with said priority in Q.933
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

wfFrSVCOptionsX213KeepPriority 1.3.6.1.4.1.18.3.5.9.9.10.1.18
The priority to keep a network connection as defined in Q.933 and X.213. Each priority is the numerical value associated with said priority in Q.933
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

wfFrSVCOptionsX213KeepLQAPriority 1.3.6.1.4.1.18.3.5.9.9.10.1.19
The lowest quality acceptable (LQA) priority to keep a network connection as defined in Q.933 and X.213. Each priority is the numerical value associated with said priority in Q.933
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

wfFrSVCOptionsLLCoreOutThroughput 1.3.6.1.4.1.18.3.5.9.9.10.1.20
Requested outgoing throughput. Q.933:Throughput is the average number of frame mode information field bits transferred per second across a user-network interface in one direction, measured over an interval of duration T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSVCOptionsLLCoreInThroughput 1.3.6.1.4.1.18.3.5.9.9.10.1.21
Requested incoming throughput. Q.933:Throughput is the average number of frame mode information field bits transferred per second across a user-network interface in one direction, measured over an interval of duration T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSVCOptionsLLCoreMinOutThroughput 1.3.6.1.4.1.18.3.5.9.9.10.1.22
Minimum acceptable outgoing throughput. Q.933:Throughput is the average number of frame mode information field bits transferred per second across a user-network interface in one direction, measured over an interval of duration T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSVCOptionsLLCoreMinInThroughput 1.3.6.1.4.1.18.3.5.9.9.10.1.23
Minimum acceptable incoming throughput. Q.933:Throughput is the average number of frame mode information field bits transferred per second across a user-network interface in one direction, measured over an interval of duration T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSVCOptionsLLCoreOutBc 1.3.6.1.4.1.18.3.5.9.9.10.1.24
Outgoing committed burst size in bytes. Q.933:Committed burst is the maximum amount of data (in bits) that the network agrees to transfer, under normal conditions, over a measurement interval T. information field bits transferred per second across a user-network interface in one direction, measured over an interval of duration T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSVCOptionsLLCoreInBc 1.3.6.1.4.1.18.3.5.9.9.10.1.25
Incoming committed burst size in bytes. Q.933:Committed burst is the maximum amount of data (in bits) that the network agrees to transfer, under normal conditions, over a measurement interval T. information field bits transferred per second across a user-network interface in one direction, measured over an interval of duration T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSVCOptionsLLCoreOutBe 1.3.6.1.4.1.18.3.5.9.9.10.1.26
Outgoing excess burst size in bytes. Q.933:Excess burst is the maximum amount of uncommitted data (in bits) that the network will attempt to deliver over a measurement interval T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSVCOptionsLLCoreInBe 1.3.6.1.4.1.18.3.5.9.9.10.1.27
Incoming excess burst size in bytes. Q.933:Excess burst is the maximum amount of uncommitted data (in bits) that the network will attempt to deliver over a measurement interval T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrSVCOptionsCongestionDisable 1.3.6.1.4.1.18.3.5.9.9.10.1.28
This indicates whether the congestion algorithm should be used for this VC. If this is not set, the value is inherited from the DLCMI record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), inherit(3)  

wfFrSVCOptionsCongestionTmr 1.3.6.1.4.1.18.3.5.9.9.10.1.29
This is the time period over which congestion notifications are counted. It is also the period during which the VC will cease sending information before resuming transmission if no congestion notifications are received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER half(1), one(2), oneandhalf(3), two(4), twoandhalf(5), three(6), threeandhalf(7), four(8), fourandhalf(9), five(10)  

wfFrSVCOptionsCongestionCtr 1.3.6.1.4.1.18.3.5.9.9.10.1.30
This represents the number of congestion notifications, when received within wfFrSVCOptionsCongestionTmr time, that will result in the VC ceasing transmissions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

wfFrSVCOptionsCongestionMethod 1.3.6.1.4.1.18.3.5.9.9.10.1.31
Action when VC congestion occurs
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER shutdown(1), throttle(2), throttlethenshutdown(3), inherit(4)  

wfFrSVCOptionsTrafficShapingDisable 1.3.6.1.4.1.18.3.5.9.9.10.1.32
Enable VC traffic shaping
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSVCOptionsWcpEnable 1.3.6.1.4.1.18.3.5.9.9.10.1.33
Enable Compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrSVCOptionsName 1.3.6.1.4.1.18.3.5.9.9.10.1.34
User name for SVC options
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfFrSVCActiveCallTable 1.3.6.1.4.1.18.3.5.9.9.11
The MIB Table for the FRF.4 signalling parameters in use for a sucessfully signalled SVC
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrSVCActiveCallEntry

wfFrSVCActiveCallEntry 1.3.6.1.4.1.18.3.5.9.9.11.1
The entry of FRF4 SVC active call MIB table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrSVCActiveCallEntry  

wfFrSVCActiveCallDelete 1.3.6.1.4.1.18.3.5.9.9.11.1.1
Delete SVC active call record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrSVCActiveCallLineNumber 1.3.6.1.4.1.18.3.5.9.9.11.1.2
Logical Line number. This attribute is Instance Id 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallLLIndex 1.3.6.1.4.1.18.3.5.9.9.11.1.3
Lower Layer Index. This attribute is Instance Id 2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallDLCI 1.3.6.1.4.1.18.3.5.9.9.11.1.4
DCLI number. This attribute is Instance Id 3
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallDirection 1.3.6.1.4.1.18.3.5.9.9.11.1.5
Direction of call relative to router
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

wfFrSVCActiveCallCircuitNumber 1.3.6.1.4.1.18.3.5.9.9.11.1.6
Circuit number associated with this call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallCalledNum 1.3.6.1.4.1.18.3.5.9.9.11.1.7
Number from called party number information element
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfFrSVCActiveCallCalledSubAdr 1.3.6.1.4.1.18.3.5.9.9.11.1.8
Subaddress from called party subaddress information element
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfFrSVCActiveCallCalledPlan 1.3.6.1.4.1.18.3.5.9.9.11.1.9
Numbering plan from called party number information element
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallCalledTypeNum 1.3.6.1.4.1.18.3.5.9.9.11.1.10
Type of number from called party number information element
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallCallingNum 1.3.6.1.4.1.18.3.5.9.9.11.1.11
Number from calling party number information element
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfFrSVCActiveCallCallingSubAdr 1.3.6.1.4.1.18.3.5.9.9.11.1.12
Subaddress from calling party subaddress information element
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfFrSVCActiveCallCallingPlan 1.3.6.1.4.1.18.3.5.9.9.11.1.13
Numbering plan from calling party number information element
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallCallingTypeNum 1.3.6.1.4.1.18.3.5.9.9.11.1.14
Type of number from calling party number information element
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallX213DataPriority 1.3.6.1.4.1.18.3.5.9.9.11.1.15
The priority of data on the network connection, from the X.213 information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallX213DataLQAPriority 1.3.6.1.4.1.18.3.5.9.9.11.1.16
The lowest quality acceptable (LQA) priority of data on the network connection, from the X.213 information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallX213GainPriority 1.3.6.1.4.1.18.3.5.9.9.11.1.17
The priority to gain a network connection, from the X.213 information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallX213GainLQAPriority 1.3.6.1.4.1.18.3.5.9.9.11.1.18
The lowest quality acceptable (LQA) priority to gain a network connection, from the X.213 information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallX213KeepPriority 1.3.6.1.4.1.18.3.5.9.9.11.1.19
The priority to keep a network connection, from the X.213 information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallX213KeepLQAPriority 1.3.6.1.4.1.18.3.5.9.9.11.1.20
The lowest quality acceptable (LQA) priority to keep a network connection, from the X.213 information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallLLCoreOutThroughput 1.3.6.1.4.1.18.3.5.9.9.11.1.21
Requested outgoing throughput, from the link layer core information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallLLCoreInThroughput 1.3.6.1.4.1.18.3.5.9.9.11.1.22
Requested incoming throughput, from the link layer core information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallLLCoreMinOutThroughput 1.3.6.1.4.1.18.3.5.9.9.11.1.23
Minimum acceptable outgoing throughput, from the link layer core information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallLLCoreMinInThroughput 1.3.6.1.4.1.18.3.5.9.9.11.1.24
Minimum acceptable incoming throughput, from the link layer core information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallLLCoreOutBc 1.3.6.1.4.1.18.3.5.9.9.11.1.25
Outgoing committed burst size in bytes, from the link layer core information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallLLCoreInBc 1.3.6.1.4.1.18.3.5.9.9.11.1.26
Incoming committed burst size in bytes, from the link layer core information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallLLCoreOutBe 1.3.6.1.4.1.18.3.5.9.9.11.1.27
Outgoing excess burst size in bytes, from the link layer core information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallLLCoreInBe 1.3.6.1.4.1.18.3.5.9.9.11.1.28
Incoming excess burst size in bytes, from the link layer core information element.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrSVCActiveCallConnectTime 1.3.6.1.4.1.18.3.5.9.9.11.1.29
Time connect message was sent or received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrPtIntfTable 1.3.6.1.4.1.18.3.5.9.9.12
The PVC Passthru interface table contains the list of interface circuits. There will be one entry for each direct mode PVC configured for PVC Passthru.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrPtIntfEntry

wfFrPtIntfEntry 1.3.6.1.4.1.18.3.5.9.9.12.1
A PVC Passthru interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrPtIntfEntry  

wfFrPtIntfDelete 1.3.6.1.4.1.18.3.5.9.9.12.1.1
Create/delete indicator for the PVC Passthru Interface entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrPtIntfDisable 1.3.6.1.4.1.18.3.5.9.9.12.1.2
Enable/disable indicator for the PVC Passthru Interface entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrPtIntfCct 1.3.6.1.4.1.18.3.5.9.9.12.1.3
The DP circuit on which this interface resides. This attribute is the first component of the Instance ID for this object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrPtIntfDlci 1.3.6.1.4.1.18.3.5.9.9.12.1.4
The dlci associated with this circuit. This attribute is the second component of the Instance ID for this object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrPtIntfState 1.3.6.1.4.1.18.3.5.9.9.12.1.5
Interface state indicator. The state is active if the circuit is up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), invalid(3), notpresent(4)  

wfFrPtIntfRxFrames 1.3.6.1.4.1.18.3.5.9.9.12.1.6
The number of frames received on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrPtIntfTxFrames 1.3.6.1.4.1.18.3.5.9.9.12.1.7
The number of frames transmitted on this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrPtIntfDiscards 1.3.6.1.4.1.18.3.5.9.9.12.1.8
The number of inbound frames discarded, either because this passthru interface is disabled or it has no partner.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrPtIntfDrops 1.3.6.1.4.1.18.3.5.9.9.12.1.9
The number of outbound frames dropped, because this passthru interface is disabled or inactive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrPtMappingTable 1.3.6.1.4.1.18.3.5.9.9.13
The PVC Passthru mapping table contains the static routes between PVCs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrPtMappingEntry

wfFrPtMappingEntry 1.3.6.1.4.1.18.3.5.9.9.13.1
A PVC Passthru mapping.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrPtMappingEntry  

wfFrPtMappingDelete 1.3.6.1.4.1.18.3.5.9.9.13.1.1
Create/delete indicator for the PVC Passthru Mapping entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrPtMappingDisable 1.3.6.1.4.1.18.3.5.9.9.13.1.2
Enable/disable indicator for the PVC Passthru Mapping entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrPtMappingCctA 1.3.6.1.4.1.18.3.5.9.9.13.1.3
The first circuit (i.e., hybrid mode PVC) for this mapping. All data received on this circuit is delivered to circuit B. This attribute is the 1st of 2 components of the Instance ID for this object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrPtMappingDlciA 1.3.6.1.4.1.18.3.5.9.9.13.1.4
The dlci associated with circuit A.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrPtMappingCctB 1.3.6.1.4.1.18.3.5.9.9.13.1.5
The second circuit (i.e., hybrid mode PVC) for this mapping. All data received on this circuit is delivered to circuit A. This attribute is the 2nd of 2 components of the Instance ID for this object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrPtMappingDlciB 1.3.6.1.4.1.18.3.5.9.9.13.1.6
The dlci associated with circuit B.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrPtMappingState 1.3.6.1.4.1.18.3.5.9.9.13.1.7
Mapping state indicator. The state is active if both circuits are up, inactive if one or both are down. The state is invalid if this mapping conflicts with another, or is misconfigured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), invalid(3), notpresent(4)  

wfFrMlTable 1.3.6.1.4.1.18.3.5.9.9.14
The Multilink Frame Relay Table, containing information and statistics for each Multilink Circuit
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrMlEntry

wfFrMlEntry 1.3.6.1.4.1.18.3.5.9.9.14.1
per bundle Multilink Frame Relay information and counters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrMlEntry  

wfFrMlDelete 1.3.6.1.4.1.18.3.5.9.9.14.1.1
Create/Delete parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrMlCircuitNumber 1.3.6.1.4.1.18.3.5.9.9.14.1.2
cct number for this instance
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfFrMlMode 1.3.6.1.4.1.18.3.5.9.9.14.1.3
Multilink frame relay mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dtedte(1), uni(2)  

wfFrMlFragPermEnable 1.3.6.1.4.1.18.3.5.9.9.14.1.4
Bundle level enable/disable for fragmenting packets regardless of trigger size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrMlCircuitMaxBuffers 1.3.6.1.4.1.18.3.5.9.9.14.1.5
This is the maximum number of stored buffers allowed in the Multilink Receive logic for this circuit at any one time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..60  

wfFrMlFragTriggerSize 1.3.6.1.4.1.18.3.5.9.9.14.1.6
This is the minimum size of a packet of which Multilink will fragment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrMlFragStrict 1.3.6.1.4.1.18.3.5.9.9.14.1.7
enable/disable strict fragmentation algorithm i.e. fragmenting a packet when its size exceeds the threshold regardless of what the average packet size is
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrMlAggVCStatusMode 1.3.6.1.4.1.18.3.5.9.9.14.1.8
FRF.13 defined mode of status aggregation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anyactive(1), allactive(2), other(3)  

wfFrMlCompressionEnable 1.3.6.1.4.1.18.3.5.9.9.14.1.9
Enable compression for all PVCs in the bundle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrMlHomeSlot 1.3.6.1.4.1.18.3.5.9.9.14.1.10
Slot on which this Multilink Control Subsystem exists
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMlStatsLineCnt 1.3.6.1.4.1.18.3.5.9.9.14.1.11
Current count of lines in Multilink bundle
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlStatsBundleSpd 1.3.6.1.4.1.18.3.5.9.9.14.1.12
Current total bandwidth of Multilink bundle
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlStatsTxOctets 1.3.6.1.4.1.18.3.5.9.9.14.1.13
Number of octets transmitted by Multilink
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsTxPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.14
Number of packets transmitted by Multilink
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsAvgTxListLen 1.3.6.1.4.1.18.3.5.9.9.14.1.15
Average number of packets received in the transient list by the Multilink Transmit gate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlStatsRxOctets 1.3.6.1.4.1.18.3.5.9.9.14.1.16
Number of octets received without error
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsRxPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.17
Number of packets received by Multilink
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsReasmFails 1.3.6.1.4.1.18.3.5.9.9.14.1.18
Number of packet reassembly failures
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsSeqNumberLost 1.3.6.1.4.1.18.3.5.9.9.14.1.19
Number of Multilink packets considered to be lost on the wire
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsSeqNumberArrivedLate 1.3.6.1.4.1.18.3.5.9.9.14.1.20
Number of Multilink packets which arrive containing an old Sequence Number. IE: packets with a more current Sequence Number have already been sent up to NCP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsReSeqBufferCnt 1.3.6.1.4.1.18.3.5.9.9.14.1.21
Number of Multilink packets currently stored in the ReSequencing buffer pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlStatsReSeqBufferMax 1.3.6.1.4.1.18.3.5.9.9.14.1.22
The Maximum Number of Multilink packets stored in the ReSequencing buffer pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsExceededBufferMax 1.3.6.1.4.1.18.3.5.9.9.14.1.23
The number of times a buffer needed to be stored by the Multilink Receive logic when the count of buffers stored, wfFrMlStatsReSeqBufferMax,was equal to the maximum allowable for this circuit, wfFrMlCircuitMaxBuffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsLinkIdleEvents 1.3.6.1.4.1.18.3.5.9.9.14.1.24
The number of times the Multilink Receive logic detected a stored buffer received on a line which has been declared idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsCalcPercent 1.3.6.1.4.1.18.3.5.9.9.14.1.25
enable/disable collection of Rx percentage line usage
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrMlStatsDebug 1.3.6.1.4.1.18.3.5.9.9.14.1.26
DEBUG parameter - this is used to control debug code for the Multilink subsystem
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrMlStatsReassmBufferCnt 1.3.6.1.4.1.18.3.5.9.9.14.1.27
Number of Multilink packets currently stored in the Reassembling buffer pools.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlStatsReassmBufferMax 1.3.6.1.4.1.18.3.5.9.9.14.1.28
The Maximum Number of Multilink packets stored in the Reassembling buffer pools.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsNumPktsFragmented 1.3.6.1.4.1.18.3.5.9.9.14.1.29
The Number of Multilink packets that were fragmented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQHiXmits 1.3.6.1.4.1.18.3.5.9.9.14.1.30
High priority transmit count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQNormalXmits 1.3.6.1.4.1.18.3.5.9.9.14.1.31
Normal priority transmit count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQLoXmits 1.3.6.1.4.1.18.3.5.9.9.14.1.32
Low priority transmit count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQHiClippedPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.33
High priority transmit clip Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQNormalClippedPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.34
Normal priority transmit clip Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQLoClippedPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.35
Low priority transmit clip Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQIntrQHighWaterPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.36
Interrupt-priority Queue high-water mark
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlStatsPQHiQHighWaterPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.37
High-priority Queue high-water mark
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlStatsPQNormalQHighWaterPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.38
Normal-priority Queue high-water mark
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlStatsPQLoQHighWaterPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.39
Low-priority Queue high-water mark
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlStatsPQHighWaterPktsClear 1.3.6.1.4.1.18.3.5.9.9.14.1.40
Attribute to clear the high-water marks. When the MIB changes, Priority Queueing (if ENABLED) checks to see if HighWaterPktsClear is different than the last time the MIB was modified in any way. If it is different, all the high water marks (see above) are set to zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrMlStatsPQDroppedPkts 1.3.6.1.4.1.18.3.5.9.9.14.1.41
Packets which were filtered in Priority Queueing
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQLargePkts 1.3.6.1.4.1.18.3.5.9.9.14.1.42
Large Packets which became an exception to latency rules
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQHiTotalOctets 1.3.6.1.4.1.18.3.5.9.9.14.1.43
Running total of High Octets transmitted when using Bandwidth Allocation dequeueing algorithm
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQNormalTotalOctets 1.3.6.1.4.1.18.3.5.9.9.14.1.44
Running total of Normal Octets transmitted when using Bandwidth Allocation dequeueing algorithm
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQLoTotalOctets 1.3.6.1.4.1.18.3.5.9.9.14.1.45
Running total of Low Octets transmitted when using Bandwidth Allocation dequeueing algorithm
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlStatsPQPktsNotQueued 1.3.6.1.4.1.18.3.5.9.9.14.1.46
Packets that were not Queued or Dropped by Priority Queuing
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCTable 1.3.6.1.4.1.18.3.5.9.9.15
The Multilink Frame Relay VC Table, containing information and statistics for each multilink aggregated VC
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrMlVCEntry

wfFrMlVCEntry 1.3.6.1.4.1.18.3.5.9.9.15.1
Multilink Frame Relay VC information and counters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrMlVCEntry  

wfFrMlVCDelete 1.3.6.1.4.1.18.3.5.9.9.15.1.1
Create/Delete parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfFrMlVCCircuitNumber 1.3.6.1.4.1.18.3.5.9.9.15.1.2
cct number for this instance
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfFrMlVCDlci 1.3.6.1.4.1.18.3.5.9.9.15.1.3
DCLI number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMlVCAggState 1.3.6.1.4.1.18.3.5.9.9.15.1.4
Vc is active or inactive according to rules of wfFrMlAggVCStatusMode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

wfFrMlVCAggNumberVCs 1.3.6.1.4.1.18.3.5.9.9.15.1.5
Number of VCs comprising this aggregated VC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrMlVCAggNumberVCsActive 1.3.6.1.4.1.18.3.5.9.9.15.1.6
Number of VCs comprising this aggregated VC that are active.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrMlVCStatsLineCnt 1.3.6.1.4.1.18.3.5.9.9.15.1.7
Current count of lines in this aggregated VC that are active
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlVCStatsBundleSpd 1.3.6.1.4.1.18.3.5.9.9.15.1.8
Current total bandwidth of lines used by this vc
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlVCStatsTxOctets 1.3.6.1.4.1.18.3.5.9.9.15.1.9
Number of octets transmitted by Multilink
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsTxPkts 1.3.6.1.4.1.18.3.5.9.9.15.1.10
Number of packets transmitted by Multilink
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsAvgTxListLen 1.3.6.1.4.1.18.3.5.9.9.15.1.11
Average number of packets received in the transient list by the Multilink Transmit gate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlVCStatsRxOctets 1.3.6.1.4.1.18.3.5.9.9.15.1.12
Number of octets received without error
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsRxPkts 1.3.6.1.4.1.18.3.5.9.9.15.1.13
Number of packets received by Multilink
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsReasmFails 1.3.6.1.4.1.18.3.5.9.9.15.1.14
Number of packet reassembly failures
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsSeqNumberLost 1.3.6.1.4.1.18.3.5.9.9.15.1.15
Number of Multilink packets considered to be lost on the wire
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsSeqNumberArrivedLate 1.3.6.1.4.1.18.3.5.9.9.15.1.16
Number of Multilink packets which arrive containing an old Sequence Number. IE: packets with a more current Sequence Number have already been sent up to NCP
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsReSeqBufferCnt 1.3.6.1.4.1.18.3.5.9.9.15.1.17
Number of Multilink packets currently stored in the ReSequencing buffer pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlVCStatsReSeqBufferMax 1.3.6.1.4.1.18.3.5.9.9.15.1.18
The Maximum Number of Multilink packets stored in the ReSequencing buffer pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsExceededBufferMax 1.3.6.1.4.1.18.3.5.9.9.15.1.19
The number of times a buffer needed to be stored by the Multilink Receive logic when the count of buffers stored, wfFrMlVCStatsReSeqBufferMax,was equal to the maximum allowable for this circuit, wfFrMlVCCircuitMaxBuffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsLinkIdleEvents 1.3.6.1.4.1.18.3.5.9.9.15.1.20
The number of times the Multilink Receive logic detected a stored buffer received on a line which has been declared idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsCalcPercent 1.3.6.1.4.1.18.3.5.9.9.15.1.21
enable/disable collection of Rx percentage line usage
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfFrMlVCStatsDebug 1.3.6.1.4.1.18.3.5.9.9.15.1.22
DEBUG parameter - this is used to control debug code for the Multilink subsystem
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfFrMlVCStatsReassmBufferCnt 1.3.6.1.4.1.18.3.5.9.9.15.1.23
Number of Multilink packets currently stored in the Reassembling buffer pools.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfFrMlVCStatsReassmBufferMax 1.3.6.1.4.1.18.3.5.9.9.15.1.24
The Maximum Number of Multilink packets stored in the Reassembling buffer pools.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMlVCStatsNumPktsFragmented 1.3.6.1.4.1.18.3.5.9.9.15.1.25
The Number of Multilink packets that were fragmented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapDlcmiTable 1.3.6.1.4.1.18.3.5.9.9.16
The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrMapDlcmiEntry

wfFrMapDlcmiEntry 1.3.6.1.4.1.18.3.5.9.9.16.1
The Parameters for a particular Data Link Connection Management Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrMapDlcmiEntry  

wfFrMapDlcmiIfIndex 1.3.6.1.4.1.18.3.5.9.9.16.1.1
The ifIndex value of the corresponding ifEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrMapDlcmiState 1.3.6.1.4.1.18.3.5.9.9.16.1.2
This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noLmiConfigured(1), lmiRev1(2), ansiT1617D(3), ansiT1617B(4), itut933A(5), ansiT1617D1994(6)  

wfFrMapDlcmiAddress 1.3.6.1.4.1.18.3.5.9.9.16.1.3
This variable states which address format is in use on the Frame Relay interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER q921(1), q922March90(2), q922November90(3), q922(4)  

wfFrMapDlcmiAddressLen 1.3.6.1.4.1.18.3.5.9.9.16.1.4
This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER twoOctets(2), threeOctets(3), fourOctets(4)  

wfFrMapDlcmiPollingInterval 1.3.6.1.4.1.18.3.5.9.9.16.1.5
This is the number of seconds between successive status enquiry messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 5..30  

wfFrMapDlcmiFullEnquiryInterval 1.3.6.1.4.1.18.3.5.9.9.16.1.6
Number of status enquiry intervals that pass before issuance of a full status enquiry message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfFrMapDlcmiErrorThreshold 1.3.6.1.4.1.18.3.5.9.9.16.1.7
This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

wfFrMapDlcmiMonitoredEvents 1.3.6.1.4.1.18.3.5.9.9.16.1.8
This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

wfFrMapDlcmiMaxSupportedVCs 1.3.6.1.4.1.18.3.5.9.9.16.1.9
The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond badValue
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMapDlcmiMulticast 1.3.6.1.4.1.18.3.5.9.9.16.1.10
This indicates whether the Frame Relay interface is using a multicast service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nonBroadcast(1), broadcast(2)  

wfFrMapDlcmiStatus 1.3.6.1.4.1.18.3.5.9.9.16.1.11
This indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, the Frame Relay interface will stay in the running state indefinitely.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(1), fault(2), initializing(3)  

wfFrMapDlcmiRowStatus 1.3.6.1.4.1.18.3.5.9.9.16.1.12
SNMP Version 2 Row Status Variable. Writable objects in the table may be written in any RowStatus state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMapDlcmiLineNumber 1.3.6.1.4.1.18.3.5.9.9.16.1.13
Instance identifier. This is the line number on which the associated Frame Relay interface resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMapDlcmiLLIndex 1.3.6.1.4.1.18.3.5.9.9.16.1.14
The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMapCircuitTable 1.3.6.1.4.1.18.3.5.9.9.17
The Frame Relay VC Table to support RFC2115 , containing information and statistics for frCircuitEntry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrMapCircuitEntry

wfFrMapCircuitEntry 1.3.6.1.4.1.18.3.5.9.9.17.1
Frame Relay VC information mapped to frCircuitEntry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrMapCircuitEntry  

wfFrMapCircuitIfIndex 1.3.6.1.4.1.18.3.5.9.9.17.1.1
The ifIndex Value of the ifEntry this virtual circuit is layered onto.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrMapCircuitDlci 1.3.6.1.4.1.18.3.5.9.9.17.1.2
The Data Link Connection Identifier for this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMapCircuitState 1.3.6.1.4.1.18.3.5.9.9.17.1.3
Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by setting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit. The use of 'invalid' is deprecated in this SNMP Version 2 MIB, in favor of frCircuitRowStatus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), active(2), inactive(3)  

wfFrMapCircuitReceivedFECNs 1.3.6.1.4.1.18.3.5.9.9.17.1.4
Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in the network enqueues the frame to a trunk whose transmission queue is congested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapCircuitReceivedBECNs 1.3.6.1.4.1.18.3.5.9.9.17.1.5
Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in the network receives the frame from a trunk whose transmission queue is congested
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapCircuitSentFrames 1.3.6.1.4.1.18.3.5.9.9.17.1.6
The number of frames sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters or CRC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapCircuitSentOctets 1.3.6.1.4.1.18.3.5.9.9.17.1.7
The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters or CRC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapCircuitReceivedFrames 1.3.6.1.4.1.18.3.5.9.9.17.1.8
Number of frames received over this virtual circuit since it was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapCircuitReceivedOctets 1.3.6.1.4.1.18.3.5.9.9.17.1.9
Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag characters or the CRC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapCircuitCreationTime 1.3.6.1.4.1.18.3.5.9.9.17.1.10
The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrMapCircuitLastTimeChange 1.3.6.1.4.1.18.3.5.9.9.17.1.11
The value of sysUpTime when last there was a change in the virtual circuit state
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrMapCircuitCommittedBurst 1.3.6.1.4.1.18.3.5.9.9.17.1.12
This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrMapCircuitExcessBurst 1.3.6.1.4.1.18.3.5.9.9.17.1.13
This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrMapCircuitThroughput 1.3.6.1.4.1.18.3.5.9.9.17.1.14
Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst rate and throughput are both non-zero, the measurement interval, T, is T=frCircuitCommittedBurst/frCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement interval, T, is T=frCircuitExcessBurst/ifSpeed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

wfFrMapCircuitMulticast 1.3.6.1.4.1.18.3.5.9.9.17.1.15
This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unicast(1), oneWay(2), twoWay(3), nWay(4)  

wfFrMapCircuitType 1.3.6.1.4.1.18.3.5.9.9.17.1.16
Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

wfFrMapCircuitDiscards 1.3.6.1.4.1.18.3.5.9.9.17.1.17
The number of inbound frames dropped because of format errors, or because the VC is inactive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapCircuitReceivedDEs 1.3.6.1.4.1.18.3.5.9.9.17.1.18
Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapCircuitSentDEs 1.3.6.1.4.1.18.3.5.9.9.17.1.19
TNumber of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of other frames sent without the DE bit set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapCircuitLogicalIfIndex 1.3.6.1.4.1.18.3.5.9.9.17.1.20
The number of times a buffer needed to be stored by the Multilink Receive logic when the count of buffers stored, wfFrMlVCStatsReSeqBufferMax,was equal to the maximum allowable for this circuit, wfFrMlVCCircuitMaxBuffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrMapCircuitRowStatus 1.3.6.1.4.1.18.3.5.9.9.17.1.21
This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMapCircuitLineNumber 1.3.6.1.4.1.18.3.5.9.9.17.1.22
Instance identifier. This is the line number on which the associated Frame Relay interface resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMapCircuitLLIndex 1.3.6.1.4.1.18.3.5.9.9.17.1.23
The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMapErrTable 1.3.6.1.4.1.18.3.5.9.9.18
A table containing information about Errors on the Frame Relay interface. Discontinuities in the counters contained in this table are the same as apply to the ifEntry associated with the Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfFrMapErrEntry

wfFrMapErrEntry 1.3.6.1.4.1.18.3.5.9.9.18.1
The error information for a single frame relay interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfFrMapErrEntry  

wfFrMapErrIfIndex 1.3.6.1.4.1.18.3.5.9.9.18.1.1
The ifIndex Value of the corresponding ifEntry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfFrMapErrType 1.3.6.1.4.1.18.3.5.9.9.18.1.2
The type of error that was last seen on this interface: receiveShort: frame was not long enough to allow demultiplexing - the address field was incomplete, or for virtual circuits using Multiprotocol over Frame Relay, the protocol identifier was missing or incomplete. receiveLong: frame exceeded maximum length configured for this interface. illegalAddress: address field did not match configured format. unknownAddress: frame received on a virtual circuit which was not active or administratively disabled. dlcmiProtoErr: unspecified error occurred when attempting to interpret link maintenance frame. dlcmiUnknownIE: link maintenance frame contained an Information Element type which is not valid for the configured link maintenance protocol. dlcmiSequenceErr: link maintenance frame contained a sequence number other than the expected value. dlcmiUnknownRpt: link maintenance frame contained a Report Type Information Element whose value was not valid for the configured link maintenance protocol. noErrorSinceReset: no errors have been detected since the last cold start or warm start.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknownError(1), receiveShort(2), receiveLong(3), illegalAddress(4), unknownAddress(5), dlcmiProtoErr(6), dlcmiUnknownIE(7), dlcmiSequenceErr(8), dlcmiUnknownRpt(9), noErrorSinceReset(10)  

wfFrMapErrData 1.3.6.1.4.1.18.3.5.9.9.18.1.3
An octet string containing as much of the error packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all header and demultiplexing information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..1600)  

wfFrMapErrTime 1.3.6.1.4.1.18.3.5.9.9.18.1.4
The value of sysUpTime at which the error was detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrMapErrFaults 1.3.6.1.4.1.18.3.5.9.9.18.1.5
The number of times the interface has gone down since it was initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfFrMapErrFaultTime 1.3.6.1.4.1.18.3.5.9.9.18.1.6
The value of sysUpTime at the time when the interface was taken down due to excessive errors. Excessive errors is defined as the time when a DLCMI exceeds the frDlcmiErrorThreshold number of errors within frDlcmiMonitoredEvents. See FrDlcmiEntry for further details.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

wfFrMapErrLineNumber 1.3.6.1.4.1.18.3.5.9.9.18.1.7
Instance identifier. This is the line number on which the associated Frame Relay interface resides.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfFrMapErrLLIndex 1.3.6.1.4.1.18.3.5.9.9.18.1.8
The Lower layer index uniquely identifies the lower layer in cases where the lower layer may be something other than the physical layer. For example if Frame Relay is running over an ATM VC, the LLIndex identifies the ATM VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor