Wellfleet-ISDN-MIB

File: Wellfleet-ISDN-MIB.mib (74606 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
Wellfleet-COMMON-MIB

Imported symbols

Counter OBJECT-TYPE DisplayString
wfIsdnGroup

Defined Types

WfModemIfEntry  
SEQUENCE    
  wfModemIfDelete INTEGER
  wfModemIfSlot INTEGER
  wfModemIfConnectStatus INTEGER
  wfModemIfConnector INTEGER
  wfModemIfCct INTEGER
  wfModemIfConnectWhen INTEGER
  wfModemIfConnectionTime INTEGER
  wfModemIfMinDurationTime INTEGER
  wfModemIfInactivityTime INTEGER
  wfModemIfRetryDelayTime INTEGER
  wfModemIfLineBandwidth INTEGER
  wfModemIfChanAggrMax INTEGER
  wfModemIfChanAggrMin INTEGER
  wfModemIfChanMgmt INTEGER
  wfModemIfRestrictType INTEGER
  wfModemIfDialRetryCount INTEGER
  wfModemIfRetries Counter
  wfModemIfForceDial INTEGER
  wfModemIfForceHangup INTEGER
  wfModemIfBringUpHour INTEGER
  wfModemIfBringUpMinute INTEGER
  wfModemIfTakeDownHour INTEGER
  wfModemIfTakeDownMinute INTEGER
  wfModemIfConnectRmtStationNum DisplayString
  wfModemIfConnectSubAddr DisplayString
  wfModemIfMediaType INTEGER
  wfModemIfUpperLayerTimeOut INTEGER
  wfModemIfRingIndicator INTEGER
  wfModemIfFsmDebug INTEGER

WfIsdnMsgCtrEntry  
SEQUENCE    
  wfIsdnMsgCtrSlot INTEGER
  wfIsdnMsgCtrDslID INTEGER
  wfIsdnMsgCallProcInd Counter
  wfIsdnMsgClearConf Counter
  wfIsdnMsgClearInd Counter
  wfIsdnMsgConnectInd Counter
  wfIsdnMsgSetupInd Counter
  wfIsdnMsgRegisterConf Counter
  wfIsdnMsgMgmtInd Counter
  wfIsdnMsgDiscInd Counter
  wfIsdnMsgActInd Counter
  wfIsdnMsgDeactInd Counter
  wfIsdnMsgConnectConf Counter
  wfIsdnMsgAlertReq Counter
  wfIsdnMsgCallProcReq Counter
  wfIsdnMsgClearReq Counter
  wfIsdnMsgConnectReq Counter
  wfIsdnMsgSetupReq Counter
  wfIsdnMsgMgmtReq Counter
  wfIsdnMsgDiscReq Counter
  wfIsdnMsgActReq Counter
  wfIsdnMsgDeactReq Counter
  wfIsdnMsgAlertInd Counter
  wfIsdnMsgInfoInd Counter

WfIsdnHostActionEntry  
SEQUENCE    
  wfIsdnHostActSlot INTEGER
  wfIsdnHostActDslId INTEGER
  wfIsdnHostActCallID INTEGER
  wfIsdnHostActMsgType INTEGER
  wfIsdnHostActCalledPtyType INTEGER
  wfIsdnHostActCalledPtyPlan INTEGER
  wfIsdnHostActCalledPtyNum OCTET STRING
  wfIsdnHostActCallingPtyType INTEGER
  wfIsdnHostActCallingPtyPlan INTEGER
  wfIsdnHostActCallingPtyNum OCTET STRING
  wfIsdnHostActCallingPtyPres INTEGER
  wfIsdnHostActChanPrefBit INTEGER
  wfIsdnHostActChanSelection INTEGER
  wfIsdnHostActCauseCode INTEGER
  wfIsdnHostActTransferCap INTEGER
  wfIsdnHostActCldSadType INTEGER
  wfIsdnHostActCldSadNum OCTET STRING
  wfIsdnHostActClgSadType INTEGER
  wfIsdnHostActClgSadNum OCTET STRING
  wfIsdnHostActCldSadPres INTEGER
  wfIsdnHostActClgSadPres INTEGER

WfIsdnSwitchCfgEntry  
SEQUENCE    
  wfIsdnSwitchCfgDelete INTEGER
  wfIsdnSwitchCfgSlot INTEGER
  wfIsdnSwitchCfgType INTEGER
  wfIsdnSwitchTestMode INTEGER
  wfIsdnSwitchIncomingFilter INTEGER
  wfIsdnSwitchTraceFacility INTEGER
  wfIsdnSwitchScreenedCalls Counter
  wfIsdnSwitchSendingComplete INTEGER
  wfIsdnSwitchGlobalRateAdaption INTEGER
  wfIsdnSwitchX25D INTEGER
  wfIsdnSwitchAllowedScreeningBits INTEGER
  wfIsdnSwitchPreauthTodCheck INTEGER

WfIsdnCallInfoEntry  
SEQUENCE    
  wfIsdnCallInfoSlot INTEGER
  wfIsdnCallInfoDslID INTEGER
  wfIsdnCallInfoCallID INTEGER
  wfIsdnCallInfoBChannel INTEGER
  wfIsdnCallInfoCallState INTEGER
  wfIsdnCallInfoTransferCap INTEGER
  wfIsdnCallInfoCalledPtyNum DisplayString
  wfIsdnCallInfoCallingPtyNum DisplayString
  wfIsdnCallInfoDuration INTEGER
  wfIsdnCallInfoConnectTime INTEGER
  wfIsdnCallInfoRateAdaption INTEGER
  wfIsdnCallInfoCalledPtySub DisplayString
  wfIsdnCallInfoCallingPtySub DisplayString
  wfIsdnCallInfoChanType INTEGER
  wfIsdnCallInfoAggrChanCnt INTEGER
  wfIsdnCallInfoTimeslotMask INTEGER
  wfIsdnCallInfoCct INTEGER

WfIsdnBriInterfaceEntry  
SEQUENCE    
  wfIsdnBriDelete INTEGER
  wfIsdnBriDisable INTEGER
  wfIsdnBriState INTEGER
  wfIsdnBriSlot INTEGER
  wfIsdnBriConnector INTEGER
  wfIsdnBriCct INTEGER
  wfIsdnBriDslId INTEGER
  wfIsdnBriLineNumber INTEGER
  wfIsdnBriModule INTEGER
  wfIsdnBriActualConnector INTEGER
  wfIsdnBriTeState INTEGER
  wfIsdnBriMtu INTEGER
  wfIsdnBriBChanLoop INTEGER
  wfIsdnBriTimer3Tmo INTEGER
  wfIsdnBriTimer4Tmo INTEGER
  wfIsdnBriRxOctets Counter
  wfIsdnBriRxFrames Counter
  wfIsdnBriTxOctets Counter
  wfIsdnBriTxFrames Counter
  wfIsdnBriRxErrors Counter
  wfIsdnBriTxErrors Counter
  wfIsdnBriRxLackRescs Counter
  wfIsdnBriTxLackRescs Counter
  wfIsdnBriTxUnderFlows Counter
  wfIsdnBriTxDChanCollisions Counter
  wfIsdnBriRxOverFlows Counter
  wfIsdnBriRxTooLongFrames Counter
  wfIsdnBriRxBadCrcs Counter
  wfIsdnBriRxAborts Counter
  wfIsdnBriRxReplenMisses Counter
  wfIsdnBriTimer3Timeouts Counter
  wfIsdnBriTimer4Timeouts Counter
  wfIsdnBriLineType INTEGER
  wfIsdnBriMode INTEGER
  wfIsdnBriInterfaceType INTEGER
  wfIsdnBriNtState INTEGER
  wfIsdnBriTimerM4Tmo INTEGER
  wfIsdnBriTimerM6Tmo INTEGER
  wfIsdnBriX25D INTEGER
  wfIsdnBriX25DTeiType INTEGER
  wfIsdnBriX25DTeiValue INTEGER

WfIsdnBChanInterfaceEntry  
SEQUENCE    
  wfIsdnBChanDelete INTEGER
  wfIsdnBChanLineNumber INTEGER
  wfIsdnBChanIndex INTEGER
  wfIsdnBChanDisable INTEGER
  wfIsdnBChanState INTEGER
  wfIsdnBChanCct INTEGER
  wfIsdnBChanWanProtocol INTEGER
  wfIsdnBChanBackupPool INTEGER
  wfIsdnBChanDemandPool INTEGER
  wfIsdnBChanDirectoryNum DisplayString
  wfIsdnBChanSpid DisplayString
  wfIsdnBChanActiveCct INTEGER
  wfIsdnBChanPriority INTEGER
  wfIsdnBchanMultilineMode INTEGER

WfIsdnPoolEntry  
SEQUENCE    
  wfIsdnPoolDelete INTEGER
  wfIsdnPoolType INTEGER
  wfIsdnPoolLineNumber INTEGER
  wfIsdnPoolId INTEGER
  wfIsdnPoolChannelCnt INTEGER
  wfIsdnPoolPriority INTEGER
  wfIsdnPoolChannelInUse INTEGER

WfIsdnLocalPhoneNumEntry  
SEQUENCE    
  wfIsdnLocalPhoneNumDelete INTEGER
  wfIsdnLocalPhoneNumLineNum INTEGER
  wfIsdnLocalPhoneNumIndex INTEGER
  wfIsdnLocalDirectoryNum DisplayString
  wfIsdnLocalSubAddr DisplayString
  wfIsdnLocalSpid DisplayString
  wfIsdnLocalAssignedChannel INTEGER
  wfIsdnLocalSpidStatus INTEGER
  wfIsdnLocalDirectoryNumType INTEGER
  wfIsdnLocalDirectoryNumPlan INTEGER
  wfIsdnSpidRetries INTEGER
  wfIsdnSpidRetryAttempts INTEGER
  wfIsdnSpidRetryTimer INTEGER
  wfIsdnSpidResetBri INTEGER

WfModemCommandEntry  
SEQUENCE    
  wfModemCommandDelete INTEGER
  wfModemCommandSlot INTEGER
  wfModemCommandConnector INTEGER
  wfModemCommandString DisplayString

Defined Values

wfModemIfTable 9.1.18.3.5.9.8.1
ISDN SYNC line record
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfModemIfEntry

wfModemIfEntry 9.1.18.3.5.9.8.1.1
An entry in the MODEM_IF table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfModemIfEntry  

wfModemIfDelete 9.1.18.3.5.9.8.1.1.1
Create/Delete parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfModemIfSlot 9.1.18.3.5.9.8.1.1.2
Instance ID Slot, filled in by driver
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

wfModemIfConnectStatus 9.1.18.3.5.9.8.1.1.3
Dial up connection status
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), disconnected(2)  

wfModemIfConnector 9.1.18.3.5.9.8.1.1.4
Instance ID Connector, filled in by driver
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4)  

wfModemIfCct 9.1.18.3.5.9.8.1.1.5
CCT number for this line instance
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfModemIfConnectWhen 9.1.18.3.5.9.8.1.1.6
when to connect line
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER data(1), enable(2)  

wfModemIfConnectionTime 9.1.18.3.5.9.8.1.1.7
connection wait timer interval (Seconds)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfModemIfMinDurationTime 9.1.18.3.5.9.8.1.1.8
min duration time for the call (Seconds)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

wfModemIfInactivityTime 9.1.18.3.5.9.8.1.1.9
In the absence of data traffic, the timeout period before a dial line is disconnected. Value is in MINUTES (max 12 hours)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..720  

wfModemIfRetryDelayTime 9.1.18.3.5.9.8.1.1.10
delay to wait after retrys fails.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(3)  

wfModemIfLineBandwidth 9.1.18.3.5.9.8.1.1.11
requested bandwidth. NULL_VAL = Default not to set bandwidth
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER bw56k(56), bw64k(64), bw484k(384), bw1536k(1536)  

wfModemIfChanAggrMax 9.1.18.3.5.9.8.1.1.12
max number of chans to aggregate. NULL_VAL = Default not to used value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..24  

wfModemIfChanAggrMin 9.1.18.3.5.9.8.1.1.13
min number of chans to aggregate. NULL_VAL = Default not to used value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..24  

wfModemIfChanMgmt 9.1.18.3.5.9.8.1.1.14
channel mgmt type. NULL_VAL = no management
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disablemgmt(1), minmgmt(2), deltamgmt(3)  

wfModemIfRestrictType 9.1.18.3.5.9.8.1.1.15
call restriction type. NULL_VAL = Default not to restrict calls, 1 = Allow defined inbound call numbers only
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER calls(1)  

wfModemIfDialRetryCount 9.1.18.3.5.9.8.1.1.16
Redial count
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

wfModemIfRetries 9.1.18.3.5.9.8.1.1.17
Number of retries attempted to connect a dialup line
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfModemIfForceDial 9.1.18.3.5.9.8.1.1.18
Force the modem to dial
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

wfModemIfForceHangup 9.1.18.3.5.9.8.1.1.19
Force the modem to disconnect
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

wfModemIfBringUpHour 9.1.18.3.5.9.8.1.1.20
Time of day hour to allow a line to dial
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfModemIfBringUpMinute 9.1.18.3.5.9.8.1.1.21
Time of day minute to allow a line to dial
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfModemIfTakeDownHour 9.1.18.3.5.9.8.1.1.22
Time of day hour to take down a dial line
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfModemIfTakeDownMinute 9.1.18.3.5.9.8.1.1.23
Time of day minute to take down a dial line
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfModemIfConnectRmtStationNum 9.1.18.3.5.9.8.1.1.24
Phone number connected to (V.25bis mode only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfModemIfConnectSubAddr 9.1.18.3.5.9.8.1.1.25
Phone number sub address for isdn numbers
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfModemIfMediaType 9.1.18.3.5.9.8.1.1.26
modem type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER raisedtr(1), v25bis(2), hayes(3)  

wfModemIfUpperLayerTimeOut 9.1.18.3.5.9.8.1.1.27
time out value for upper layer protocol initialization (seconds)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

wfModemIfRingIndicator 9.1.18.3.5.9.8.1.1.28
Ring Indicator enable/disable parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfModemIfFsmDebug 9.1.18.3.5.9.8.1.1.29
FSM Debug indicator (for V25bis or RaiseDtr FSM)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIsdnMsgCtrTable 9.1.18.3.5.9.8.4
ISDN message counters, one entry per Digital Subscriber Loop (DSL), maintained by the Line Manager.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIsdnMsgCtrEntry

wfIsdnMsgCtrEntry 9.1.18.3.5.9.8.4.1
An entry in the ISDN message counter table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIsdnMsgCtrEntry  

wfIsdnMsgCtrSlot 9.1.18.3.5.9.8.4.1.1
Digital Subscriber Loop (DSL) these counters apply to
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnMsgCtrDslID 9.1.18.3.5.9.8.4.1.2
Digital Subscriber Loop (DSL) these counters apply to
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnMsgCallProcInd 9.1.18.3.5.9.8.4.1.3
Call Proceeding Indication from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgClearConf 9.1.18.3.5.9.8.4.1.4
Release Complete from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgClearInd 9.1.18.3.5.9.8.4.1.5
Release Indication from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgConnectInd 9.1.18.3.5.9.8.4.1.6
Connect Indication from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgSetupInd 9.1.18.3.5.9.8.4.1.7
Setup Indication from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgRegisterConf 9.1.18.3.5.9.8.4.1.8
Register Confirmation from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgMgmtInd 9.1.18.3.5.9.8.4.1.9
Management Indication from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgDiscInd 9.1.18.3.5.9.8.4.1.10
Disconnect Indication from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgActInd 9.1.18.3.5.9.8.4.1.11
Activation Indication from the driver
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgDeactInd 9.1.18.3.5.9.8.4.1.12
Deactivation Indication from the driver
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgConnectConf 9.1.18.3.5.9.8.4.1.13
Connect Acknowledge from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgAlertReq 9.1.18.3.5.9.8.4.1.14
Alert Request to the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgCallProcReq 9.1.18.3.5.9.8.4.1.15
Call Proceeding Request to the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgClearReq 9.1.18.3.5.9.8.4.1.16
Clear Request to the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgConnectReq 9.1.18.3.5.9.8.4.1.17
Connect Request to the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgSetupReq 9.1.18.3.5.9.8.4.1.18
Setup Request to the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgMgmtReq 9.1.18.3.5.9.8.4.1.19
Management Request to the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgDiscReq 9.1.18.3.5.9.8.4.1.20
Disconnect Request to the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgActReq 9.1.18.3.5.9.8.4.1.21
Activate Request to the driver
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgDeactReq 9.1.18.3.5.9.8.4.1.22
Deactivate Request to the driver
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgAlertInd 9.1.18.3.5.9.8.4.1.23
Alert Indication from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnMsgInfoInd 9.1.18.3.5.9.8.4.1.24
Information Indication from the network
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnHostActionTable 9.1.18.3.5.9.8.5
This table is for debugging purposes only! It allows Host initiated call control actions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIsdnHostActionEntry

wfIsdnHostActionEntry 9.1.18.3.5.9.8.5.1
An entry in the host action table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIsdnHostActionEntry  

wfIsdnHostActSlot 9.1.18.3.5.9.8.5.1.1
the slot the interface is on
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnHostActDslId 9.1.18.3.5.9.8.5.1.2
DSL id of the interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnHostActCallID 9.1.18.3.5.9.8.5.1.3
Call ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnHostActMsgType 9.1.18.3.5.9.8.5.1.4
type of message to be sent to call control (or ME)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER info(15), setup(28), disc(50), activate(82), deactivate(83)  

wfIsdnHostActCalledPtyType 9.1.18.3.5.9.8.5.1.5
called party type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER intl(1), nat(2), loc(4)  

wfIsdnHostActCalledPtyPlan 9.1.18.3.5.9.8.5.1.6
called party plan
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER isdn(1), tele(2), pvt(9)  

wfIsdnHostActCalledPtyNum 9.1.18.3.5.9.8.5.1.7
called party number in ASCII digits
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfIsdnHostActCallingPtyType 9.1.18.3.5.9.8.5.1.8
calling party type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER intl(1), nat(2), loc(4)  

wfIsdnHostActCallingPtyPlan 9.1.18.3.5.9.8.5.1.9
calling party plan
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER isdn(1), tele(2), pvt(9)  

wfIsdnHostActCallingPtyNum 9.1.18.3.5.9.8.5.1.10
calling party number in ASCII digits
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfIsdnHostActCallingPtyPres 9.1.18.3.5.9.8.5.1.11
calling party presentation indicator
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rest(1), unavl(2)  

wfIsdnHostActChanPrefBit 9.1.18.3.5.9.8.5.1.12
channel preferred/exclusive bit
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnHostActChanSelection 9.1.18.3.5.9.8.5.1.13
channel selection
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER channelb1(1), channelb2(2), channel(3)  

wfIsdnHostActCauseCode 9.1.18.3.5.9.8.5.1.14
cause code
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(16), rejected(21), unspecified(31), barred(54)  

wfIsdnHostActTransferCap 9.1.18.3.5.9.8.5.1.15
Transfer Capability required for Bearer Cap IE
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unrestricted(8), restricted(9)  

wfIsdnHostActCldSadType 9.1.18.3.5.9.8.5.1.16
Called Party Subaddress Type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER user(2)  

wfIsdnHostActCldSadNum 9.1.18.3.5.9.8.5.1.17
Called Party subaddress Max length 20 octets
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfIsdnHostActClgSadType 9.1.18.3.5.9.8.5.1.18
Calling party subaddress Type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER user(2)  

wfIsdnHostActClgSadNum 9.1.18.3.5.9.8.5.1.19
Called Party subaddress Max length 20 octets
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfIsdnHostActCldSadPres 9.1.18.3.5.9.8.5.1.20
Called party subaddress Type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1)  

wfIsdnHostActClgSadPres 9.1.18.3.5.9.8.5.1.21
Calling party subaddress presentation indication
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1)  

wfIsdnSwitchCfgTable 9.1.18.3.5.9.8.6
This is the Switchtype Configuration for the ISDN signaling stack.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIsdnSwitchCfgEntry

wfIsdnSwitchCfgEntry 9.1.18.3.5.9.8.6.1
An entry in the ISDN Switch table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIsdnSwitchCfgEntry  

wfIsdnSwitchCfgDelete 9.1.18.3.5.9.8.6.1.1
Create / Delete Parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfIsdnSwitchCfgSlot 9.1.18.3.5.9.8.6.1.2
Slot which has the ISDN interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

wfIsdnSwitchCfgType 9.1.18.3.5.9.8.6.1.3
The Type of switch from which the ISDN service is subscribed for this slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER brinet3(1), briswissnet3(2), bri5ess(4), bridms100(7), brivn3(10), brikdd(11), brintt(12), brits013(14), brini1(15), pri4ess(17), pri5ess(18), pridms100(20), prikdd(21), printt(22), prinet5(27), prits014(29)  

wfIsdnSwitchTestMode 9.1.18.3.5.9.8.6.1.4
enable engineering test mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnSwitchIncomingFilter 9.1.18.3.5.9.8.6.1.5
Filter Calling address in the Incoming call
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfIsdnSwitchTraceFacility 9.1.18.3.5.9.8.6.1.6
Enable/Disable ISDN protocol stack message tracing facility - when this is enabled, all messages exchanged between Layer 2 and Layer 3 ISDN entities will be captured to the event log as TRACE messages
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1)  

wfIsdnSwitchScreenedCalls 9.1.18.3.5.9.8.6.1.7
Number of incoming calls ignored because of screening, ie. the Calling Party number was not in the list of approved numbers
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnSwitchSendingComplete 9.1.18.3.5.9.8.6.1.8
The Sending Complete IE is required to be sent in the Setup message indicating en-bloc sending. Enable this attribute to include Sending Complete IE if the Switch providing ISDN service requires it.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIsdnSwitchGlobalRateAdaption 9.1.18.3.5.9.8.6.1.9
Global Rate Adaption, If this value is configured request the configured Rate adpation when establishing connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rate64(1), rate56(2)  

wfIsdnSwitchX25D 9.1.18.3.5.9.8.6.1.10
Enable this attribute to support the X25 over ISDN D channel feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIsdnSwitchAllowedScreeningBits 9.1.18.3.5.9.8.6.1.11
Set this attribute to the value of the screening bits that is allowed in the incoming calling number IE. Only a calling number with screening bits matching this attribute will be recognised, all others will be ignored. If this attribute is disabled, the first calling number found will be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

wfIsdnSwitchPreauthTodCheck 9.1.18.3.5.9.8.6.1.12
Enable this attribute to attempt to identify whether a caller is outside of a valid TOD window using the calling number, before accepting the call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIsdnCallInfoTable 9.1.18.3.5.9.8.7
Call Information Table - contains data pertinent to a an active call, both incoming and outgoing, indexed by an internally generated call reference number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIsdnCallInfoEntry

wfIsdnCallInfoEntry 9.1.18.3.5.9.8.7.1
An entry in the ISDN Call Info Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIsdnCallInfoEntry  

wfIsdnCallInfoSlot 9.1.18.3.5.9.8.7.1.1
The slot this call resides on
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoDslID 9.1.18.3.5.9.8.7.1.2
Digital Subscriber Loop (DSL) this call resides on
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoCallID 9.1.18.3.5.9.8.7.1.3
Call ID instance identifier - numbers in the range 0x0000 - 0x7FFF are assigned to incoming calls, 0x8000 - 0xFFFF are assigned to outgoing calls - this is used as a handle to manage an active call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoBChannel 9.1.18.3.5.9.8.7.1.4
B Channel this call resides on
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoCallState 9.1.18.3.5.9.8.7.1.5
Line Manager Call State
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoTransferCap 9.1.18.3.5.9.8.7.1.6
Transfer Capability value from the Bearer Capability Information Element
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER udi(8), rdi(9)  

wfIsdnCallInfoCalledPtyNum 9.1.18.3.5.9.8.7.1.7
Called Party Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfIsdnCallInfoCallingPtyNum 9.1.18.3.5.9.8.7.1.8
Calling Party Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfIsdnCallInfoDuration 9.1.18.3.5.9.8.7.1.9
Duration of the call in minutes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoConnectTime 9.1.18.3.5.9.8.7.1.10
Start time of the call (HHMMSS)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoRateAdaption 9.1.18.3.5.9.8.7.1.11
Rate adaption for this call in KBPS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoCalledPtySub 9.1.18.3.5.9.8.7.1.12
Called Party Subaddress
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfIsdnCallInfoCallingPtySub 9.1.18.3.5.9.8.7.1.13
Calling Party Subaddress
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfIsdnCallInfoChanType 9.1.18.3.5.9.8.7.1.14
ISDN call channel type: B Channel or Multirate
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bchannel(1), multirate(2)  

wfIsdnCallInfoAggrChanCnt 9.1.18.3.5.9.8.7.1.15
PRI Multirate call's aggreated channel count
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoTimeslotMask 9.1.18.3.5.9.8.7.1.16
Timeslots used by a PRI Multirate call
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnCallInfoCct 9.1.18.3.5.9.8.7.1.17
Circuit using this call
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnBriInterfaceTable 9.1.18.3.5.9.8.9
ISDN BRI D Channel MIB Record
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIsdnBriInterfaceEntry

wfIsdnBriInterfaceEntry 9.1.18.3.5.9.8.9.1
An entry in the ISDN table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIsdnBriInterfaceEntry  

wfIsdnBriDelete 9.1.18.3.5.9.8.9.1.1
Create/Delete parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfIsdnBriDisable 9.1.18.3.5.9.8.9.1.2
Enable/Disable parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIsdnBriState 9.1.18.3.5.9.8.9.1.3
Line Driver state variable, Not Present, Init, Down, Up
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), ubcwaiting(10), notpresent(20)  

wfIsdnBriSlot 9.1.18.3.5.9.8.9.1.4
Instance ID Slot, filled in by driver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnBriConnector 9.1.18.3.5.9.8.9.1.5
Instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 9 and 'connector' is defined in attribute 10 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..44  

wfIsdnBriCct 9.1.18.3.5.9.8.9.1.6
CCT number for this interface instance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

wfIsdnBriDslId 9.1.18.3.5.9.8.9.1.7
The ID of this DSL interface. This stands for 'Digital Subscriber Loop' which is the physical link from the TE (us) to the NT (switch).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnBriLineNumber 9.1.18.3.5.9.8.9.1.8
Line number for this line instance. This is assigned at configuration time and uniquely identifies this line
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnBriModule 9.1.18.3.5.9.8.9.1.9
Module number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4)  

wfIsdnBriActualConnector 9.1.18.3.5.9.8.9.1.10
Actual connector number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4)  

wfIsdnBriTeState 9.1.18.3.5.9.8.9.1.11
State of the S/T interface from the routers point of view. These states correspond to those described in the CCITT I.430 recommendation and with those described with relation to the ISAC-S.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), sensing(2), deactivated(3), awaitsignal(4), identifyinput(5), synchronized(6), activated(7), lostframing(8)  

wfIsdnBriMtu 9.1.18.3.5.9.8.9.1.12
Contains the largest frame size that can be received by this interface. Anything larger than the MTU will be discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 3..1024  

wfIsdnBriBChanLoop 9.1.18.3.5.9.8.9.1.13
This allows us to put the B Channels into loopback at the physical interface. This is usually used for Layer 1 conformance testing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIsdnBriTimer3Tmo 9.1.18.3.5.9.8.9.1.14
Indicates the amount of time in seconds for our T3 timer. The T3 timer is initiated by the host (i.e. the router). The T3 timer is started whenever the S/T interface is in a deactivated state and the host (i.e. the Router) wishes to activate the interface. As an example, for our application, the Router would activate the interface when there was data to be transmitted out that interface. At the point when we try activating the interface, the T3 timer is started. During the duration of the T3 timer, the router in trying to activate the interface will transmit INFO 1's out the S/T interface until either a signal is detected (from the network) or the T3 timer expires.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

wfIsdnBriTimer4Tmo 9.1.18.3.5.9.8.9.1.15
Indicates the amount of time in milliseconds for our T4 timer. The T4 timer is a debounce timer which is used to shield the upper layers from short glitches at the S/T interface. Spurious problems of short duration will not be reported to the upper layers until the T4 timer expires. The T4 timer is started when leaving state F7 or F8 upon the reception of INFO 0. The corresponding Deactivation Indication will be delivered to layer 2 only if layer 1 does not enter an active state before expiration of this timer. (Note that a value of 0 indicates the timer is disabled).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 500..1000  

wfIsdnBriRxOctets 9.1.18.3.5.9.8.9.1.16
Number of octets received without error
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriRxFrames 9.1.18.3.5.9.8.9.1.17
Number of frames received without error
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriTxOctets 9.1.18.3.5.9.8.9.1.18
Number of octets transmitted without error
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriTxFrames 9.1.18.3.5.9.8.9.1.19
Number of frames transmitted without error
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriRxErrors 9.1.18.3.5.9.8.9.1.20
Total number of receive errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriTxErrors 9.1.18.3.5.9.8.9.1.21
Total number of transmission errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriRxLackRescs 9.1.18.3.5.9.8.9.1.22
Number of times a receive packet was discarded because there was no receive descriptor available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriTxLackRescs 9.1.18.3.5.9.8.9.1.23
Number of frames clipped in driver's transmit routine due to transmit congestion.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriTxUnderFlows 9.1.18.3.5.9.8.9.1.24
Number of transmission underflows, device FIFO went empty before driver could replenish with more data
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriTxDChanCollisions 9.1.18.3.5.9.8.9.1.25
Number of times a collison occurred on the S-Bus transmitting a frame greater than 32 bytes, so frame had to be retransmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriRxOverFlows 9.1.18.3.5.9.8.9.1.26
Number of receive overflows, device FIFO overflowed before the driver was able to read/empty the FIFO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriRxTooLongFrames 9.1.18.3.5.9.8.9.1.27
Number of frames received which were larger than the defined MTU
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriRxBadCrcs 9.1.18.3.5.9.8.9.1.28
Number of bad receive frames caused by FCS errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriRxAborts 9.1.18.3.5.9.8.9.1.29
Number of aborted frames due to being non octet aligned (i.e seven one's in a row received)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriRxReplenMisses 9.1.18.3.5.9.8.9.1.30
Number of packet buffer misses while attempting to replenish driver receive descriptor ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriTimer3Timeouts 9.1.18.3.5.9.8.9.1.31
Number of Timer 3 timeout's detected. This indicates the number of times the Router tried to activate the S/T interface without success.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriTimer4Timeouts 9.1.18.3.5.9.8.9.1.32
Number of Timer 4 timeout's detected. The T4 timer is started when leaving state F7 or F8 upon the reception of INFO 0. If layer 1 does not enter an active state before expiration of this timer, then a Deactivation Indication will be sent to layer 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfIsdnBriLineType 9.1.18.3.5.9.8.9.1.33
BRI line type can be either Multipoint (passive bus configuration with more than one device connected) or Point-to-Point with a single device attached.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ptp(1), mtp(2)  

wfIsdnBriMode 9.1.18.3.5.9.8.9.1.34
This attribute controls the operation of the Basic Rate Interface. DIALUP is the traditional mode of operation in which call setup signalling is done in concert with the ISDN switch. LEASED is a special case of ISDN in which no signalling will be done with the switch and instead the switch is configured with nailed up connections to specific remote ISDN termination points.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dialup(1), leased(2), floatb(3)  

wfIsdnBriInterfaceType 9.1.18.3.5.9.8.9.1.35
Type of ISDN interface card being used. It can either be 'U' or 'S/T'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isdns(1), isdnu(2)  

wfIsdnBriNtState 9.1.18.3.5.9.8.9.1.36
State of the U interface from the routers point of view. These states correspond to those described in the ANSI T1.601 recommendation and with those described in relation to the IEC-Q.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fullreset(1), alerting(2), receivereset(3), synchronized1(4), synchronized2(5), deactivated(6), activated(7), test(8), error(9), pendreceivereset(10)  

wfIsdnBriTimerM4Tmo 9.1.18.3.5.9.8.9.1.37
Indicates the amount of time in seconds for our M4 timer. The M4 timer is initiated by the host (i.e. the router). The M4 timer is started whenever the host receives a wakeup signal from the U interface. During the duration of the M4 timer, the router in trying to activate the interface will respond with a TN signal followed with SN1 (optional) signal. The router will then receive SL1 from the U interface followed with SL2. Upon reception of SL2 signal, the router will respond with SN2. At this point the timer is stopped if it has not expired yet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

wfIsdnBriTimerM6Tmo 9.1.18.3.5.9.8.9.1.38
Indicates the amount of time in milliseconds for our M6 timer. The M6 timer is initiated by the host (i.e. the router). The host has to complete the start-up sequence for the duration of the M6 timer. If it fails to do so, it will enter the receivereset state and remain in that state until it receives a wakeup signal from the U interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

wfIsdnBriX25D 9.1.18.3.5.9.8.9.1.39
enable/disable the X25 over ISDN D channel feature on the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIsdnBriX25DTeiType 9.1.18.3.5.9.8.9.1.40
TEI type used for the X25 over ISDN D channel feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), fixed(2)  

wfIsdnBriX25DTeiValue 9.1.18.3.5.9.8.9.1.41
TEI value used for the X25 over ISDN D channel feature. 0 to 63 are for fixed TEI type and 127 for auto TEI type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

wfIsdnBChanInterfaceTable 9.1.18.3.5.9.8.10
ISDN Logical B channel MIB Record
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIsdnBChanInterfaceEntry

wfIsdnBChanInterfaceEntry 9.1.18.3.5.9.8.10.1
An entry in the ISDN table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIsdnBChanInterfaceEntry  

wfIsdnBChanDelete 9.1.18.3.5.9.8.10.1.1
Create/Delete parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfIsdnBChanLineNumber 9.1.18.3.5.9.8.10.1.2
line number for this line instance
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnBChanIndex 9.1.18.3.5.9.8.10.1.3
a unique one up type number to create a list
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

wfIsdnBChanDisable 9.1.18.3.5.9.8.10.1.4
Enable/Disable parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfIsdnBChanState 9.1.18.3.5.9.8.10.1.5
Line Driver state variable, Not Present, Init, Down, Up
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfIsdnBChanCct 9.1.18.3.5.9.8.10.1.6
CCT number for this interface instance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

wfIsdnBChanWanProtocol 9.1.18.3.5.9.8.10.1.7
WAN protocol selection is provided via this parameter. The supported protocols can be selected per interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ppp(1), framerelay(2), x25(3)  

wfIsdnBChanBackupPool 9.1.18.3.5.9.8.10.1.8
Backup pool id containing this line driver
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

wfIsdnBChanDemandPool 9.1.18.3.5.9.8.10.1.9
Dial on demand pool id containing this line driver
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

wfIsdnBChanDirectoryNum 9.1.18.3.5.9.8.10.1.10
Directory Number associated with the interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfIsdnBChanSpid 9.1.18.3.5.9.8.10.1.11
Service Profile IDentifier - assigned by the Central Office on ordering ISDN service from a switch conforming to National ISDN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfIsdnBChanActiveCct 9.1.18.3.5.9.8.10.1.12
CCT number for this interface instance
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

wfIsdnBChanPriority 9.1.18.3.5.9.8.10.1.13
Priority associated with this ISDN B Channel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..50  

wfIsdnBchanMultilineMode 9.1.18.3.5.9.8.10.1.14
This indicates the roll the B channel plays in a Bandwidth on Demand-Multiline Circuit. If this is not BOD, the mode is standard.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER standard(1), master(2), slave(3), secondary(4)  

wfIsdnPoolTable 9.1.18.3.5.9.8.11
ISDN Pool MIB Record
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIsdnPoolEntry

wfIsdnPoolEntry 9.1.18.3.5.9.8.11.1
An entry in the Pool table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIsdnPoolEntry  

wfIsdnPoolDelete 9.1.18.3.5.9.8.11.1.1
Create/Delete parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfIsdnPoolType 9.1.18.3.5.9.8.11.1.2
Type of Pool . Backup or Demand
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER demand(1), backup(2), bandwidth(3)  

wfIsdnPoolLineNumber 9.1.18.3.5.9.8.11.1.3
D channel line number associated with this pool instance
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnPoolId 9.1.18.3.5.9.8.11.1.4
a unique pool ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnPoolChannelCnt 9.1.18.3.5.9.8.11.1.5
Number of Channels allocated for this Pool
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

wfIsdnPoolPriority 9.1.18.3.5.9.8.11.1.6
Priority of Lines in Pool
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..50  

wfIsdnPoolChannelInUse 9.1.18.3.5.9.8.11.1.7
Number of Channels in use from this Pool.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnLocalPhoneNumTable 9.1.18.3.5.9.8.12
ISDN Local phone number list
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfIsdnLocalPhoneNumEntry

wfIsdnLocalPhoneNumEntry 9.1.18.3.5.9.8.12.1
An entry in table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfIsdnLocalPhoneNumEntry  

wfIsdnLocalPhoneNumDelete 9.1.18.3.5.9.8.12.1.1
Delete this phone number from the list
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfIsdnLocalPhoneNumLineNum 9.1.18.3.5.9.8.12.1.2
D Channel Line Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfIsdnLocalPhoneNumIndex 9.1.18.3.5.9.8.12.1.3
a unique sequetial index to create a list
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

wfIsdnLocalDirectoryNum 9.1.18.3.5.9.8.12.1.4
Directory Number (local phone number) assiciated with the interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfIsdnLocalSubAddr 9.1.18.3.5.9.8.12.1.5
Local Phone Number, the sub address portion
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfIsdnLocalSpid 9.1.18.3.5.9.8.12.1.6
Service Profile IDentifier - assigned by the Central Office on ordering ISDN service from a switch conforming to National ISDN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfIsdnLocalAssignedChannel 9.1.18.3.5.9.8.12.1.7
for Swserv phone numbers, the delimiter portion
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER channel1(1), channel2(2)  

wfIsdnLocalSpidStatus 9.1.18.3.5.9.8.12.1.8
The status of SPID registration
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER accepted(1), rejected(2)  

wfIsdnLocalDirectoryNumType 9.1.18.3.5.9.8.12.1.9
For ISDN type number, it needs type of number UNKNOWN Type is 0, use 1 to satisfy MDL requirement This attribute value will be ANDED with 0xFFF0 before using it.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), international(16), national(32), specific(48), subscriber(64), abbreviated(96)  

wfIsdnLocalDirectoryNumPlan 9.1.18.3.5.9.8.12.1.10
If Isdn and if type of number is UNKNOWN or INERNATIONAL or NATIONAL or SUBSCRIBER then a plan number is needed. UNKNOWN is 0 , using 16 (0x10)to satisfy MDL requirement. We will AND this field with 0x0F before using it.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(16), telephony(1), x121(3), telex(4), standard(8), private(9)  

wfIsdnSpidRetries 9.1.18.3.5.9.8.12.1.11
Number of times the SPID registration request is sent to the ISDN switch
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnSpidRetryAttempts 9.1.18.3.5.9.8.12.1.12
Number of times the SPID registration is re-envoked.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnSpidRetryTimer 9.1.18.3.5.9.8.12.1.13
Amount of time in seconds to wait before re-envoking SPID registration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfIsdnSpidResetBri 9.1.18.3.5.9.8.12.1.14
When enabled the ISDN BRI interface is reset after all the SPID registartion attempts fail, zero setting disables this functionality. When set to a nonzero N the interface will be reset if the total number of BRI interface resets on this slot is less than N.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfModemCommandTable 9.1.18.3.5.9.8.13
Modem Command String interface Entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfModemCommandEntry

wfModemCommandEntry 9.1.18.3.5.9.8.13.1
An entry in table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfModemCommandEntry  

wfModemCommandDelete 9.1.18.3.5.9.8.13.1.1
Delete this Modem Command Entry mib record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfModemCommandSlot 9.1.18.3.5.9.8.13.1.2
Instance ID Slot, filled in by driver
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

wfModemCommandConnector 9.1.18.3.5.9.8.13.1.3
Instance ID Connector, filled in by driver
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4), five(5), six(6), seven(7), eight(8)  

wfModemCommandString 9.1.18.3.5.9.8.13.1.4
String to be passed to the modem to configure it. Syntax of the string is not checked
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString