Wellfleet-X25-MIB

File: Wellfleet-X25-MIB.mib (94891 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
Wellfleet-COMMON-MIB

Imported symbols

IpAddress Counter Gauge
OBJECT-TYPE DisplayString wfX25Group

Defined Types

WfX25ServiceEntry  
SEQUENCE    
  wfX25ServiceDelete INTEGER
  wfX25ServiceDisable INTEGER
  wfX25ServiceSlot INTEGER
  wfX25ServiceConnector INTEGER
  wfX25ServiceLineNumber INTEGER
  wfX25ServiceLLIndex INTEGER
  wfX25ServiceCct INTEGER
  wfX25ServiceIndex INTEGER
  wfX25ServiceType INTEGER
  wfX25ServiceConnRef INTEGER
  wfX25ServiceConnId INTEGER
  wfX25ServiceRemoteX121Addr DisplayString
  wfX25ServiceRemoteIpAddr IpAddress
  wfX25ServiceBCast INTEGER
  wfX25ServiceMaxConn INTEGER
  wfX25ServicePrecedence INTEGER
  wfX25ServiceMaxIdle INTEGER
  wfX25ServiceCallRetry INTEGER
  wfX25ServiceFlowFacility INTEGER
  wfX25ServiceWinSize INTEGER
  wfX25ServicePktSize INTEGER
  wfX25ServiceFastSelRequest INTEGER
  wfX25ServiceFastSelAccept INTEGER
  wfX25ServiceRevChRequest INTEGER
  wfX25ServiceRevChAccept INTEGER
  wfX25ServiceCugFormat INTEGER
  wfX25ServiceCugType INTEGER
  wfX25ServiceCugNum INTEGER
  wfX25ServiceUserFacility OCTET STRING
  wfX25ServiceValid INTEGER
  wfX25ServiceBFE INTEGER
  wfX25ServiceForceCugZero INTEGER
  wfX25ServiceWcpEnable INTEGER
  wfX25ServiceMUX INTEGER
  wfX25ServicePtopCallRequest INTEGER
  wfX25ServiceVcType INTEGER
  wfX25ServicePvcLcn INTEGER
  wfX25ServiceMacPoolStart OCTET STRING
  wfX25ServiceMacPoolSize INTEGER
  wfX25ServiceWindowTimeout INTEGER
  wfX25ServiceVcBurstThroughput INTEGER
  wfX25ServiceVcBurstQDepth INTEGER
  wfX25ServiceVcPriority INTEGER
  wfX25ServiceVcBurstQClippedPkts Counter
  wfX25ServiceVcBurstQPktCnt Counter
  wfX25ServiceVcBurstQHighWaterPkts Gauge
  wfX25ServiceVcPktDrops Counter
  wfX25ServicePlpPktDrops Counter
  wfX25ServiceBurstThrPerVc INTEGER
  wfX25ServiceBackupRecoveryDelay INTEGER
  wfX25ServiceSetupTime INTEGER
  wfX25ServiceRetryNumber INTEGER
  wfX25BackupInitiation INTEGER
  wfX25ServiceEntryName DisplayString

WfX25VcEntry  
SEQUENCE    
  wfX25VcSlotNum INTEGER
  wfX25VcConnector INTEGER
  wfX25VcLineNumber INTEGER
  wfX25VcLLIndex INTEGER
  wfX25VcCct INTEGER
  wfX25VcNumber INTEGER
  wfX25VcDataTxs Counter
  wfX25VcInterruptTxs Counter
  wfX25VcResetTxs Counter
  wfX25VcRrTxs Counter
  wfX25VcRnrTxs Counter
  wfX25VcRejectTxs Counter
  wfX25VcSegmentTxs Counter
  wfX25VcBytesTxs Counter
  wfX25VcIntBytesTxs Counter
  wfX25VcDataRxs Counter
  wfX25VcInterruptRxs Counter
  wfX25VcResetRxs Counter
  wfX25VcRrRxs Counter
  wfX25VcRnrRxs Counter
  wfX25VcRejectRxs Counter
  wfX25VcSegmentRxs Counter
  wfX25VcBytesRxs Counter
  wfX25VcIntBytesRxs Counter
  wfX25VcApPktsDropped Counter
  wfX25VcRemoteX121Addr DisplayString
  wfX25VcBurstQClippedPkts Counter
  wfX25VcBurstQPktCnt Counter
  wfX25VcBurstQHighWaterPkts Gauge
  wfX25VcPktsLargerThanBurstThrCnt Counter
  wfX25VcPktDrops Counter
  wfX25VcPlpPktDrops Counter
  wfX25VcMbsOutstanding Counter
  wfX25VcMbsOutstandingPostTx Counter
  wfX25VcMaxTx Counter
  wfX25VcMbsQueueCnt Counter
  wfX25VcMbsQueueCntPostTx Counter
  wfX25VcTxQueueCnt Counter
  wfX25VcTxQueueCntPostTx Counter

WfLapbPktEntry  
SEQUENCE    
  wfLapbPktDelete INTEGER
  wfLapbPktDisable INTEGER
  wfLapbPktSlotNum INTEGER
  wfLapbPktConnector INTEGER
  wfLapbPktLineNumber INTEGER
  wfLapbPktLLIndex INTEGER
  wfLapbPktLapbCct INTEGER
  wfLapbPktLinkId INTEGER
  wfLapbPktLineState INTEGER
  wfLapbPktSeqSize INTEGER
  wfLapbPktMaxWindow INTEGER
  wfLapbPktMaxLength INTEGER
  wfLapbPktMaxThroughput INTEGER
  wfLapbPktFlowCtl INTEGER
  wfLapbPktThroughput INTEGER
  wfLapbPktUserIdentity INTEGER
  wfLapbPktInCalls INTEGER
  wfLapbPktOutCalls INTEGER
  wfLapbPktFastAccept INTEGER
  wfLapbPktReverseAccept INTEGER
  wfLapbPktFastSelect INTEGER
  wfLapbPktReverseCharging INTEGER
  wfLapbPktCugSelection INTEGER
  wfLapbPktCugOA INTEGER
  wfLapbPktCugBilateral INTEGER
  wfLapbPktRpoaSelection INTEGER
  wfLapbPktChargeInform INTEGER
  wfLapbPktTransitDelay INTEGER
  wfLapbPktFullAddressing INTEGER
  wfLapbPktAccFormat INTEGER
  wfLapbPktRelFormat INTEGER
  wfLapbPktT1 INTEGER
  wfLapbPktT2 INTEGER
  wfLapbPktT3 INTEGER
  wfLapbPktT4 INTEGER
  wfLapbPktIwcCnt INTEGER
  wfLapbPktIwcId INTEGER
  wfLapbPktBwcCnt INTEGER
  wfLapbPktBwcId INTEGER
  wfLapbPktOwcCnt INTEGER
  wfLapbPktOwcId INTEGER
  wfLapbPktDefWindow INTEGER
  wfLapbPktDefLength INTEGER
  wfLapbPktDefClass INTEGER
  wfLapbPktDxe INTEGER
  wfLapbPktConformance INTEGER
  wfLapbPktStandard INTEGER
  wfLapbPktNetaddr DisplayString
  wfLapbPktStatistics INTEGER
  wfLapbPktNetaddrType INTEGER
  wfLapbPktDDNIpAddr IpAddress
  wfLapbPktPDNX121Addr DisplayString
  wfLapbPktTxT5 INTEGER
  wfLapbPktUseDfltService INTEGER
  wfLapbPktPVCCnt INTEGER
  wfLapbPktPVCLowLcn INTEGER
  wfLapbPktClientTimer INTEGER
  wfLapbPktPduSize INTEGER
  wfLapbPktTranspacCauseCodeEnable INTEGER
  wfLapbPktTxMbsQueueThreshold INTEGER
  wfLapbPktBackupDebugLvl INTEGER
  wfLapbPktBackupEnable INTEGER

WfLapbPktStatsEntry  
SEQUENCE    
  wfLapbPktStatsSlotNum INTEGER
  wfLapbPktStatsConnector INTEGER
  wfLapbPktStatsLineNumber INTEGER
  wfLapbPktStatsLLIndex INTEGER
  wfLapbPktStatsCct INTEGER
  wfLapbPktStatsLineAddress DisplayString
  wfLapbPktStatsMaxVcs Counter
  wfLapbPktStatsActiveVcs Counter
  wfLapbPktStatsActiveMax Counter
  wfLapbPktStatsTotalConnections Counter
  wfLapbPktStatsFailedConnections Counter
  wfLapbPktStatsNormalDisconnects Counter
  wfLapbPktStatsAbnormalDisconnects Counter
  wfLapbPktStatsDataTxs Counter
  wfLapbPktStatsInterruptTxs Counter
  wfLapbPktStatsResetTxs Counter
  wfLapbPktStatsRrTxs Counter
  wfLapbPktStatsRnrTxs Counter
  wfLapbPktStatsRejectTxs Counter
  wfLapbPktStatsRestartTxs Counter
  wfLapbPktStatsDiagTxs Counter
  wfLapbPktStatsSegmentTxs Counter
  wfLapbPktStatsBytesTxs Counter
  wfLapbPktStatsIntBytesTxs Counter
  wfLapbPktStatsDataRxs Counter
  wfLapbPktStatsInterruptRxs Counter
  wfLapbPktStatsResetRxs Counter
  wfLapbPktStatsRrRxs Counter
  wfLapbPktStatsRnrRxs Counter
  wfLapbPktStatsRejectRxs Counter
  wfLapbPktStatsRestartRxs Counter
  wfLapbPktStatsDiagRxs Counter
  wfLapbPktStatsSegmentRxs Counter
  wfLapbPktStatsBytesRxs Counter
  wfLapbPktStatsIntBytesRxs Counter
  wfLapbPktStatsOnOffSwitch INTEGER

WfX25PvcServiceEntry  
SEQUENCE    
  wfX25PvcDelete INTEGER
  wfX25PvcDisable INTEGER
  wfX25SlotNum INTEGER
  wfX25Connector INTEGER
  wfX25LineNumber INTEGER
  wfX25LLIndex INTEGER
  wfX25PvcServiceCct INTEGER
  wfX25PvcServiceIndex INTEGER
  wfX25PvcServiceType INTEGER
  wfX25PvcRxDefWindow INTEGER
  wfX25PvcTxDefWindow INTEGER
  wfX25PvcRxDefLength INTEGER
  wfX25PvcTxDefLength INTEGER
  wfX25PvcRxDefClass INTEGER
  wfX25PvcTxDefClass INTEGER

WfX25QllcAddrMapEntry  
SEQUENCE    
  wfX25QllcAddrMapDelete INTEGER
  wfX25QllcAddrMapDisable INTEGER
  wfX25QllcAddrMapState INTEGER
  wfX25QllcAddrMapCct INTEGER
  wfX25QllcAddrMapIndex INTEGER
  wfX25QllcAddrMapPartnerX121 DisplayString
  wfX25QllcAddrMapAdjacentX121 DisplayString
  wfX25QllcAddrMapPid INTEGER
  wfX25QllcAddrMapPartnerMac OCTET STRING
  wfX25QllcAddrMapPartnerSap INTEGER
  wfX25QllcAddrMapAdjacentMac OCTET STRING
  wfX25QllcAddrMapAdjacentSap INTEGER
  wfX25QllcAddrMapOptions INTEGER
  wfX25QllcAddrMapTrace INTEGER
  wfX25QllcAddrMapPuType INTEGER
  wfX25QllcAddrMapGenXid INTEGER
  wfX25QllcAddrMapNodeId OCTET STRING
  wfX25QllcAddrMapName DisplayString

Defined Values

wfX25 1.3.6.1.4.1.18.3.5.9.4.1
OBJECT IDENTIFIER    

wfX25Delete 1.3.6.1.4.1.18.3.5.9.4.1.1
Create/Delete parameter. Default is created.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfX25Disable 1.3.6.1.4.1.18.3.5.9.4.1.2
Enable/Disable parameter. Default is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfX25State 1.3.6.1.4.1.18.3.5.9.4.1.3
The current state of the entire X.25.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfX25ServiceTable 1.3.6.1.4.1.18.3.5.9.4.2
This table describes the services of a circuit on an X.25 line.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfX25ServiceEntry

wfX25ServiceEntry 1.3.6.1.4.1.18.3.5.9.4.2.1
An entry in the X25 Service table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfX25ServiceEntry  

wfX25ServiceDelete 1.3.6.1.4.1.18.3.5.9.4.2.1.1
Create/Delete parameter, default = created.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfX25ServiceDisable 1.3.6.1.4.1.18.3.5.9.4.2.1.2
Enable/Disable parameter, default = enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfX25ServiceSlot 1.3.6.1.4.1.18.3.5.9.4.2.1.3
Slot number and part of Instance Id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

wfX25ServiceConnector 1.3.6.1.4.1.18.3.5.9.4.2.1.4
Connector number and instance ID member.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4)  

wfX25ServiceLineNumber 1.3.6.1.4.1.18.3.5.9.4.2.1.5
Instance identifier member. This is the line number assigned to the driver X.25 is running over. No used in 7.60.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25ServiceLLIndex 1.3.6.1.4.1.18.3.5.9.4.2.1.6
Instance identifier member. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a driver, the index will be 0. Not used in 7.60.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25ServiceCct 1.3.6.1.4.1.18.3.5.9.4.2.1.7
Circuit number and instance ID member.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

wfX25ServiceIndex 1.3.6.1.4.1.18.3.5.9.4.2.1.8
X.25 service entry record ID for this instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4000  

wfX25ServiceType 1.3.6.1.4.1.18.3.5.9.4.2.1.9
Type of Service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pdntype(1), ddntype(2), ptoptype(4), npttype(8), ipextype(16), qllctype(32), defaulttype(64)  

wfX25ServiceConnRef 1.3.6.1.4.1.18.3.5.9.4.2.1.10
Use of Connection Reference Numbers in Call Request For PDN only, if ON then use wfX25ServiceConnId as starting reference number for PDN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfX25ServiceConnId 1.3.6.1.4.1.18.3.5.9.4.2.1.11
Connection Id to be used in a PTOP Call request. For PDN this will be the starting number to be used as Connection Id in PDN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

wfX25ServiceRemoteX121Addr 1.3.6.1.4.1.18.3.5.9.4.2.1.12
Remote X.121 address for this table entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfX25ServiceRemoteIpAddr 1.3.6.1.4.1.18.3.5.9.4.2.1.13
Remote IP address for PDN and DDN only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfX25ServiceBCast 1.3.6.1.4.1.18.3.5.9.4.2.1.14
Broadcast recipient status for this table entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfX25ServiceMaxConn 1.3.6.1.4.1.18.3.5.9.4.2.1.15
Maximum connections per destination for this table entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

wfX25ServicePrecedence 1.3.6.1.4.1.18.3.5.9.4.2.1.16
Precedence value for this table entry instance. DDN only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negot(1), default(2)  

wfX25ServiceMaxIdle 1.3.6.1.4.1.18.3.5.9.4.2.1.17
Maximum Idle Time in Minutes for this table entry instance. If 0 is entered the connection stays on forever.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

wfX25ServiceCallRetry 1.3.6.1.4.1.18.3.5.9.4.2.1.18
Interval in seconds between Call Request to same the destination. Must be at least 2 times T11/T21 Timer for Packet Level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..999  

wfX25ServiceFlowFacility 1.3.6.1.4.1.18.3.5.9.4.2.1.19
Flow Control negotiation facility parameter for this instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER negot(1), default(2)  

wfX25ServiceWinSize 1.3.6.1.4.1.18.3.5.9.4.2.1.20
Packet window size parameter for this table entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

wfX25ServicePktSize 1.3.6.1.4.1.18.3.5.9.4.2.1.21
Packet size parameter for this table entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size16(4), size32(5), size64(6), size128(7), size256(8), size512(9), size1024(10), size2048(11), size4096(12)  

wfX25ServiceFastSelRequest 1.3.6.1.4.1.18.3.5.9.4.2.1.22
Fast Select Request Facility for this table entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfX25ServiceFastSelAccept 1.3.6.1.4.1.18.3.5.9.4.2.1.23
Fast Select Accept Facility for this table entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfX25ServiceRevChRequest 1.3.6.1.4.1.18.3.5.9.4.2.1.24
Reverse Charge Request Facility for this table entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfX25ServiceRevChAccept 1.3.6.1.4.1.18.3.5.9.4.2.1.25
Reverse charge Accept Facility for this table entry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfX25ServiceCugFormat 1.3.6.1.4.1.18.3.5.9.4.2.1.26
Closed User Group Facility Format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), basic(2), ext(3)  

wfX25ServiceCugType 1.3.6.1.4.1.18.3.5.9.4.2.1.27
Closed User Group Facility Type: Normal CUG, Bilateral CUG, or Outgoing Access CUG.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), oa(2), bilat(3)  

wfX25ServiceCugNum 1.3.6.1.4.1.18.3.5.9.4.2.1.28
Closed User Group (CUG) number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9999  

wfX25ServiceUserFacility 1.3.6.1.4.1.18.3.5.9.4.2.1.29
Additional User Supplied Facilities. Must be in Hexadecimal form.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfX25ServiceValid 1.3.6.1.4.1.18.3.5.9.4.2.1.30
Validity of the record - updated by X.25.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

wfX25ServiceBFE 1.3.6.1.4.1.18.3.5.9.4.2.1.31
Enabled if DDNX.25/BFE enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfX25ServiceForceCugZero 1.3.6.1.4.1.18.3.5.9.4.2.1.32
Force Closed User Group of Zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfX25ServiceWcpEnable 1.3.6.1.4.1.18.3.5.9.4.2.1.33
Enable compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfX25ServiceMUX 1.3.6.1.4.1.18.3.5.9.4.2.1.34
Set to Enabled to perform 1356 Multiplexing of protocols in the same Vc
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfX25ServicePtopCallRequest 1.3.6.1.4.1.18.3.5.9.4.2.1.35
Select which side of PTOP circuit initiates the connection. (default = highest X.121 address initiates the call)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(1), local(2), remote(3)  

wfX25ServiceVcType 1.3.6.1.4.1.18.3.5.9.4.2.1.36
Determines whether this service record represents a Switch Virtual Circuit (SVC) or Permanent Virtual Circuit (PVC). (default = svc)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER svc(1), pvc(2)  

wfX25ServicePvcLcn 1.3.6.1.4.1.18.3.5.9.4.2.1.37
PVC Logical Channel Number for this service record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

wfX25ServiceMacPoolStart 1.3.6.1.4.1.18.3.5.9.4.2.1.38
Starting address of MAC address pool
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

wfX25ServiceMacPoolSize 1.3.6.1.4.1.18.3.5.9.4.2.1.39
The size of MAC address pool
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfX25ServiceWindowTimeout 1.3.6.1.4.1.18.3.5.9.4.2.1.40
Window Timeout to detect a dysfunctional VC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfX25ServiceVcBurstThroughput 1.3.6.1.4.1.18.3.5.9.4.2.1.41
Maximum number of bits of data allowed to be transmitted for this service record in one second. This value is divided equally amongst the VCs active for this service record at any given point in time. A value of 0 indicates Burst control is not to be applied. The default value is 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfX25ServiceVcBurstQDepth 1.3.6.1.4.1.18.3.5.9.4.2.1.42
Maximum number of buffers that can be held in the Burst Queue while the VC gate pends.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

wfX25ServiceVcPriority 1.3.6.1.4.1.18.3.5.9.4.2.1.43
Priority of the VCs associated with this service record. This value is used to specify whether packets being transmitted for this VC will be given preference over those on another VC or not. In the range for this value, 1..9999, 1 signifies highest priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9999  

wfX25ServiceVcBurstQClippedPkts 1.3.6.1.4.1.18.3.5.9.4.2.1.44
Total Number of packets dropped for VCs of this service record due to lack of buffers in their respective Burst Queues.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25ServiceVcBurstQPktCnt 1.3.6.1.4.1.18.3.5.9.4.2.1.45
Total Number of packets stored in the Burst Queues of VCs of this service record between successive attempts to forward to the PLP layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25ServiceVcBurstQHighWaterPkts 1.3.6.1.4.1.18.3.5.9.4.2.1.46
The Highest Water Packet Mark of the Burst Queues of VCs of this service record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfX25ServiceVcPktDrops 1.3.6.1.4.1.18.3.5.9.4.2.1.47
Total Number of Packets Dropped for VCs of this service record at the VC level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25ServicePlpPktDrops 1.3.6.1.4.1.18.3.5.9.4.2.1.48
Total Number of Packets Dropped by PLP for VCs of this service record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25ServiceBurstThrPerVc 1.3.6.1.4.1.18.3.5.9.4.2.1.49
Burst Throughput per VC, dynamically computed as Burst Throughput confiogured for the service record divided by number of VCs for the service record in Data Transfer State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25ServiceBackupRecoveryDelay 1.3.6.1.4.1.18.3.5.9.4.2.1.50
Delay in reverting back to a restored PDN service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfX25ServiceSetupTime 1.3.6.1.4.1.18.3.5.9.4.2.1.51
Total time allowed for setting up a PDN SVC before attempting a backup
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfX25ServiceRetryNumber 1.3.6.1.4.1.18.3.5.9.4.2.1.52
The number of times a PDN SVC setup will be attempted if no response is received from the peer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfX25BackupInitiation 1.3.6.1.4.1.18.3.5.9.4.2.1.53
Determines whether to initiate PDN backup on failure of any SVC or the last one
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER any(1), last(2)  

wfX25ServiceEntryName 1.3.6.1.4.1.18.3.5.9.4.2.1.54
name of the sevice entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfX25VcTable 1.3.6.1.4.1.18.3.5.9.4.4
This is a table of Statistic Entries is per Virtual Circuit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfX25VcEntry

wfX25VcEntry 1.3.6.1.4.1.18.3.5.9.4.4.1
An entry in the X.25 VC table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfX25VcEntry  

wfX25VcSlotNum 1.3.6.1.4.1.18.3.5.9.4.4.1.1
Instance ID and Slot number this VC is on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

wfX25VcConnector 1.3.6.1.4.1.18.3.5.9.4.4.1.2
Instance ID and Connector number this VC is using
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4)  

wfX25VcLineNumber 1.3.6.1.4.1.18.3.5.9.4.4.1.3
Instance identifier member. This is the line number assigned to the driver X25 is running on top of and this VC is running on. No used in 7.60
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25VcLLIndex 1.3.6.1.4.1.18.3.5.9.4.4.1.4
Instance identifier member. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a driver, the index will be 0. Not used in 7.60.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25VcCct 1.3.6.1.4.1.18.3.5.9.4.4.1.5
Instance ID and CCT supporting these VCs. User determines this CCT via log.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25VcNumber 1.3.6.1.4.1.18.3.5.9.4.4.1.6
Instance ID and VC number for this VC. This number corresponds to the LCN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25VcDataTxs 1.3.6.1.4.1.18.3.5.9.4.4.1.7
Number of Data Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcInterruptTxs 1.3.6.1.4.1.18.3.5.9.4.4.1.8
Number of Interrupt Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcResetTxs 1.3.6.1.4.1.18.3.5.9.4.4.1.9
Number of Reset Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcRrTxs 1.3.6.1.4.1.18.3.5.9.4.4.1.10
Number of Receiver Ready Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcRnrTxs 1.3.6.1.4.1.18.3.5.9.4.4.1.11
Number of Receiver Not Ready Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcRejectTxs 1.3.6.1.4.1.18.3.5.9.4.4.1.12
Number of Reject Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcSegmentTxs 1.3.6.1.4.1.18.3.5.9.4.4.1.13
Number of Charge Units sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcBytesTxs 1.3.6.1.4.1.18.3.5.9.4.4.1.14
Number of Data Bytes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcIntBytesTxs 1.3.6.1.4.1.18.3.5.9.4.4.1.15
Number of Interrupt Data Bytes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcDataRxs 1.3.6.1.4.1.18.3.5.9.4.4.1.16
Number of Data Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcInterruptRxs 1.3.6.1.4.1.18.3.5.9.4.4.1.17
Number of Interrupt Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcResetRxs 1.3.6.1.4.1.18.3.5.9.4.4.1.18
Number of Reset Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcRrRxs 1.3.6.1.4.1.18.3.5.9.4.4.1.19
Number of Receiver Ready Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcRnrRxs 1.3.6.1.4.1.18.3.5.9.4.4.1.20
Number of Receiver Not Ready Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcRejectRxs 1.3.6.1.4.1.18.3.5.9.4.4.1.21
Number of Reject Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcSegmentRxs 1.3.6.1.4.1.18.3.5.9.4.4.1.22
Number of Charge Units received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcBytesRxs 1.3.6.1.4.1.18.3.5.9.4.4.1.23
Number of Data Bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcIntBytesRxs 1.3.6.1.4.1.18.3.5.9.4.4.1.24
Number of Interrupt Data Bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcApPktsDropped 1.3.6.1.4.1.18.3.5.9.4.4.1.25
Number of Application/redirector Packets Droped
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcRemoteX121Addr 1.3.6.1.4.1.18.3.5.9.4.4.1.26
Remote DTE Address for this connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfX25VcBurstQClippedPkts 1.3.6.1.4.1.18.3.5.9.4.4.1.27
Number of packets dropped for this VC due to lack of buffers in the Burst Queue. Packets are only dropped when the value of the statistic wfX25VcBurstQPktCnt is equal to wfX25ServiceVcBurstQDepth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcBurstQPktCnt 1.3.6.1.4.1.18.3.5.9.4.4.1.28
Number of packets stored for this VC in the Burst Queue between successive attempts to forward to the PLP layer. This statistic is indicative of the transient loading of buffering mechanism between the PLP layer and the upper layers. The maximum value that this statistic can reach is determined by the setting of wfX25ServiceVcMaxBufCnt. When the value of this statistic is equal to wfX25ServiceVcBurstQDepth, all subsequently arriving packets are dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcBurstQHighWaterPkts 1.3.6.1.4.1.18.3.5.9.4.4.1.29
High Water Packet Mark for the Burst Queue of this VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

wfX25VcPktsLargerThanBurstThrCnt 1.3.6.1.4.1.18.3.5.9.4.4.1.30
Total Number of Packets serviced on this VC which are larger than the computed burst throughput per VC. The burst throughput per VC is computed as wfX25ServiceVcBurstThroughput / No. of Active VCs for the service record.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcPktDrops 1.3.6.1.4.1.18.3.5.9.4.4.1.31
Total Number of Packets Dropped on this VC. These drops are caused by insufficient resources being available to forward the packets to the PLP layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcPlpPktDrops 1.3.6.1.4.1.18.3.5.9.4.4.1.32
Total Number of Packets Dropped by PLP on this VC. These drops are due to either the line being disabled or the lack of buffering to store packets for transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcMbsOutstanding 1.3.6.1.4.1.18.3.5.9.4.4.1.33
Number of packets sent to the PLP layer from the upper layer that have not yet been added to the local assembly/deassembly queue at the PLP layer. These packets will require additional processing at a later time. This value is set after the PLP layer has completed processing of the maximum allowable number of packets received from the upper layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcMbsOutstandingPostTx 1.3.6.1.4.1.18.3.5.9.4.4.1.34
Number of buffers sent to the PLP layer that have not yet been added to the local asembly/deassembly queue. This value is set after the PLP layer has completed transmission of the maximum allowable number of packets from the local assembly/ deassembly queue to the lower layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcMaxTx 1.3.6.1.4.1.18.3.5.9.4.4.1.35
Maximum Number of buffers that can be sent from the upper layer to the PLP layer at any one time without overflowing the local assembly/desasembly queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcMbsQueueCnt 1.3.6.1.4.1.18.3.5.9.4.4.1.36
Number of buffers sent to the PLP layer that are currently on the local assembly/deassembly queue at the PLP layer. This value is set after the PLP layer has completed processing of the maximum allowable number of packets received from the upper layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcMbsQueueCntPostTx 1.3.6.1.4.1.18.3.5.9.4.4.1.37
Number of buffers sent to the PLP layer that have not yet been added to the local assembly/deassembly queue. This value is set after the PLP layer has completed transmission of the maximum allowable number of packets from the local assembly/ deassembly queue to the lower layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcTxQueueCnt 1.3.6.1.4.1.18.3.5.9.4.4.1.38
Number of buffers sent to the PLP layer that are currently on the transmit queue at the PLP layer. This value is set after the PLP layer has completed processing of the maximum allowable number of packets received from upper layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfX25VcTxQueueCntPostTx 1.3.6.1.4.1.18.3.5.9.4.4.1.39
Number of buffers sent to the PLP layer that are currently on thequeue to transmit at the PLP layer. This value is set after the PLP layer has completed transmission of the maximum allowable number of packets from the local assembly/deassembly queue to the lower layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktTable 1.3.6.1.4.1.18.3.5.9.4.5
The table of LAPB PKT Level Parameters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfLapbPktEntry

wfLapbPktEntry 1.3.6.1.4.1.18.3.5.9.4.5.1
An entry in the LAPB PKT table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfLapbPktEntry  

wfLapbPktDelete 1.3.6.1.4.1.18.3.5.9.4.5.1.1
Create/Delete parameter. Default is created.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfLapbPktDisable 1.3.6.1.4.1.18.3.5.9.4.5.1.2
Enable/Disable parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfLapbPktSlotNum 1.3.6.1.4.1.18.3.5.9.4.5.1.3
Instance identifier. This is the slot number where this X.25 packet layer is running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktConnector 1.3.6.1.4.1.18.3.5.9.4.5.1.4
Instance identifier. This is the Physical connector number for the Physical layer associated with this X25 Packet layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktLineNumber 1.3.6.1.4.1.18.3.5.9.4.5.1.5
Instance identifier. This is the line number assigned to the LAPB Driver associated with this X25 Packet Layer. Not used in 7.60
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktLLIndex 1.3.6.1.4.1.18.3.5.9.4.5.1.6
Instance identifier. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a driver, the index will be 0. Not used in 7.60.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktLapbCct 1.3.6.1.4.1.18.3.5.9.4.5.1.7
Circuit number of Lapb (SYNC) driver associated with this X25 Packet Layer
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktLinkId 1.3.6.1.4.1.18.3.5.9.4.5.1.8
Access Link identifier - index into line information array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktLineState 1.3.6.1.4.1.18.3.5.9.4.5.1.9
Reflects the state of the X.25 packet layer that is associated with this network record. When the state of this parameter is set to Up, the router can transfer data between the line layer and the packet layer. Note that this parameter is used internally; it does NOT reflect the status of the underlying synchronous circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfLapbPktSeqSize 1.3.6.1.4.1.18.3.5.9.4.5.1.10
Sequence numbering scheme for the data packets. Modulo 8 or Modulo 128
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mod8(8), mod128(128)  

wfLapbPktMaxWindow 1.3.6.1.4.1.18.3.5.9.4.5.1.11
Maximum window size that can be negotiated on a per call basis, if the flow control facility is subscribed too. Extended window size of 127 can be used if wfLapbPktSeqSize is 128. Otherwise the maximum is 7. This attribute is effective only if the attribute wfLapbPktFloCtl is set to 'ON'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

wfLapbPktMaxLength 1.3.6.1.4.1.18.3.5.9.4.5.1.12
Maximum packet length that can be negotiated on a per call basis, if the flow control facility is subscribed too. This attribute is effective only if the attribute wfLapbPktFloCtl is set to 'ON'. This attribute should not be greater than the wfSYNCEntry attribute wfSyncMtu.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size16(4), size32(5), size64(6), size128(7), size256(8), size512(9), size1024(10), size2048(11), size4096(12)  

wfLapbPktMaxThroughput 1.3.6.1.4.1.18.3.5.9.4.5.1.13
Maximum throughput class value that can be negotiated on a per call basis, if the throughput class negotiation facility is subscribed too. For this to be effective the attribute wfLapbPktThroughput must be set to ON.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER thrclass75(3), thrclass150(4), thrclass300(5), thrclass600(6), thrclass1200(7), thrclass2400(8), thrclass4800(9), thrclass9600(10), thrclass19200(11), thrclass48k(12), thrclass64k(13)  

wfLapbPktFlowCtl 1.3.6.1.4.1.18.3.5.9.4.5.1.14
Flow control parameter negotiation facility subscription
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktThroughput 1.3.6.1.4.1.18.3.5.9.4.5.1.15
Throughput class negotiation facility subscription
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktUserIdentity 1.3.6.1.4.1.18.3.5.9.4.5.1.16
Network user identification (NUI) related facility subscription
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktInCalls 1.3.6.1.4.1.18.3.5.9.4.5.1.17
Specifies whether or not (ON/OFF) incoming calls are permitted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktOutCalls 1.3.6.1.4.1.18.3.5.9.4.5.1.18
Specifies whether or not (ON/OFF) outgoing calls are permitted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktFastAccept 1.3.6.1.4.1.18.3.5.9.4.5.1.19
Specifies whether or not (ON/OFF) fast select acceptance facility is subscribed too.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktReverseAccept 1.3.6.1.4.1.18.3.5.9.4.5.1.20
Specifies whether or not (ON/OFF) reverse charge aceptance facility is subscribed to. If this is set this packet layer will simply accept calls with reverse charge facility. But the packet layer (router) will not provide any charging information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktFastSelect 1.3.6.1.4.1.18.3.5.9.4.5.1.21
Specifies whether or not (ON/OFF) fast select facility is allowed on a per call basis.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktReverseCharging 1.3.6.1.4.1.18.3.5.9.4.5.1.22
Specifies whether or not (ON/OFF) reverse charging facility is allowed on a per call basis.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktCugSelection 1.3.6.1.4.1.18.3.5.9.4.5.1.23
Format of the Closed User Group (CUG) related facilities supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), basic(16), extended(32)  

wfLapbPktCugOA 1.3.6.1.4.1.18.3.5.9.4.5.1.24
Specifies whether or not CUG with Outgoing access selection facility is supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), cugoa(64)  

wfLapbPktCugBilateral 1.3.6.1.4.1.18.3.5.9.4.5.1.25
Specifies whether or not Bilateral Closed User Group related facility is supported. If this is set, then the wfLapbPktCugSelection should be set to EXTENDED.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(2), bilat(128)  

wfLapbPktRpoaSelection 1.3.6.1.4.1.18.3.5.9.4.5.1.26
Specifies whether or not RPOA related facility is supported. Outgoing calls will not contain any RPOA facility. But if set this packet layer will simply accept calls with RPOA related facility.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktChargeInform 1.3.6.1.4.1.18.3.5.9.4.5.1.27
Specifies whether or not the charging information related facilities are supported. Outgoing calls will not contain the charge information related facility. But if set this packet layer will simply accept calls with the charge information related facility. No charging information will be collected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktTransitDelay 1.3.6.1.4.1.18.3.5.9.4.5.1.28
Transit delay indication facility. If set, accept calls with this facility.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktFullAddressing 1.3.6.1.4.1.18.3.5.9.4.5.1.29
If this attribute is set, the full local X121 address (calling address) is supplied in the outgoing call request and the X.25 network also expected to provide the full called address in the incoming call packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktAccFormat 1.3.6.1.4.1.18.3.5.9.4.5.1.30
Specifies the format of the call accepted packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER basic(2), allext(255), defbas(103)  

wfLapbPktRelFormat 1.3.6.1.4.1.18.3.5.9.4.5.1.31
Connection release format - format of Clear Requests
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER basic(2), allext(255), defext(103)  

wfLapbPktT1 1.3.6.1.4.1.18.3.5.9.4.5.1.32
Local confirmation timeouts in seconds. This timer represents the following CCITT timers. If DCE: T10 (restart), T12 (reset), T13 (clear) If DTE: T20 (restart), T22 (reset), T23 (clear)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

wfLapbPktT2 1.3.6.1.4.1.18.3.5.9.4.5.1.33
Call confirmation time out in seconds. This represent the CCITT T11 timer for the DCE and T21 timer for the DTE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

wfLapbPktT3 1.3.6.1.4.1.18.3.5.9.4.5.1.34
Congestion or busy condition watchdog timer in milliseconds. When system resources needed for packet assembly/deassembly depleted, this timer is set to reenter the PLP state machine to retry. User should use extreme caution in manipulating this timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 200..2000  

wfLapbPktT4 1.3.6.1.4.1.18.3.5.9.4.5.1.35
Data packet transmission watchdog timer in milliseconds. This is the delay for acknowledgement. It is used to reenter PLP state machine also. User should use extreme caution in manipulating this timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 200..2000  

wfLapbPktIwcCnt 1.3.6.1.4.1.18.3.5.9.4.5.1.36
Number of IWC (Incoming VC's) defined on this access link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..512  

wfLapbPktIwcId 1.3.6.1.4.1.18.3.5.9.4.5.1.37
Low LCN ID for IWC (Incoming VC's) defined on this access link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

wfLapbPktBwcCnt 1.3.6.1.4.1.18.3.5.9.4.5.1.38
Number of BWC (Bidirectional VC's) defined on this access link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..512  

wfLapbPktBwcId 1.3.6.1.4.1.18.3.5.9.4.5.1.39
Low LCN ID for BWC (Bidirectional VC's) defined on this access link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

wfLapbPktOwcCnt 1.3.6.1.4.1.18.3.5.9.4.5.1.40
Number of OWC (Outgoing VC's) defined on this access link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..512  

wfLapbPktOwcId 1.3.6.1.4.1.18.3.5.9.4.5.1.41
Low LCN ID for OWC (Outgoing VC's) defined on this access link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

wfLapbPktDefWindow 1.3.6.1.4.1.18.3.5.9.4.5.1.42
Non standard default transmit/receive window size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

wfLapbPktDefLength 1.3.6.1.4.1.18.3.5.9.4.5.1.43
Non standard default transmit/receive packet size. This attribute should not be greater than the wfSyncEntry attribute wfSyncMtu.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size16(4), size32(5), size64(6), size128(7), size256(8), size512(9), size1024(10), size2048(11), size4096(12)  

wfLapbPktDefClass 1.3.6.1.4.1.18.3.5.9.4.5.1.44
Non standard default transmit/receive throughput class assignment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 3..13  

wfLapbPktDxe 1.3.6.1.4.1.18.3.5.9.4.5.1.45
Specify type of local X25 interface and imply subsequent rules of X.25. DXE_X25DTERSTA ->DTE mode with Restart Procedure. DXE_X25DTE ->DTE mode without any restart procedure DXE_X25DCE ->DCE mode with restart procedure DXE_X25DTEDXE ->DTE/DTE environment, unassigned roles.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER x25dtersta(1), x25dte(2), x25dce(3), x25dtedxe(4)  

wfLapbPktConformance 1.3.6.1.4.1.18.3.5.9.4.5.1.46
CCITT conformance recommendation used on each line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dxe1980(257), fsel1980(258), dxe1984(513), fsel1984(514), dxe1988(1025), fsel1988(1026)  

wfLapbPktStandard 1.3.6.1.4.1.18.3.5.9.4.5.1.47
Network Standard to be used on each line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER stdiso(16), stddod(32), stdnone(1)  

wfLapbPktNetaddr 1.3.6.1.4.1.18.3.5.9.4.5.1.48
This Link's Network address (X121 address).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfLapbPktStatistics 1.3.6.1.4.1.18.3.5.9.4.5.1.49
Gives the user the ability to Turn ON or Shut OFF statistics computation. This can be shut off for better performance on the line. Now it also provides a small packet trace function.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER statson(1), statsoff(2)  

wfLapbPktNetaddrType 1.3.6.1.4.1.18.3.5.9.4.5.1.50
This defines whether the Network connection is to a DDN network or PDN Network. This is used to decide how the Local X121 Network address is derived. If this attribute is set to DDN the Local X121 address used in the attribute wfLapbPktNetaddr will be derived from the user supplied IP address. Otherwise the X121 address should be supplid by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pdntype(1), ddntype(2), bfetype(3)  

wfLapbPktDDNIpAddr 1.3.6.1.4.1.18.3.5.9.4.5.1.51
If the wfLapbPktNetaddrType is DDNTYPE or DDN_BFE this is the user supplied local IP address. The router will convert this to the corresponding X121 address and the X121 address value will be put in wfLapbPktNetaddr attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wfLapbPktPDNX121Addr 1.3.6.1.4.1.18.3.5.9.4.5.1.52
If the wfLapbPktNetaddrType is PDNTYPE this is the user supplied local X.121 address. The router will put this value in wfLapbPktNetaddr attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfLapbPktTxT5 1.3.6.1.4.1.18.3.5.9.4.5.1.53
Tx window size transmit delay timer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8000  

wfLapbPktUseDfltService 1.3.6.1.4.1.18.3.5.9.4.5.1.54
Indicates whether or not to use the default ddn service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

wfLapbPktPVCCnt 1.3.6.1.4.1.18.3.5.9.4.5.1.55
Number of PVCs defined on this access link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..512  

wfLapbPktPVCLowLcn 1.3.6.1.4.1.18.3.5.9.4.5.1.56
Low LCN ID for PVCs defined on this access link.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

wfLapbPktClientTimer 1.3.6.1.4.1.18.3.5.9.4.5.1.57
Client application response timeout period in seconds. This timer allows for the extended delays that can occur negotiating with remote clients (e.g., IPEX or QLLC). This timer must be greater than the wfLapbPktT3 period and less than wfLapbPktT2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

wfLapbPktPduSize 1.3.6.1.4.1.18.3.5.9.4.5.1.58
The X.25 PDU Size for this logical channel. This PDU size represents the M_BUF_SIZE used for X.25 Fragmentation and Reassembly in the packet layer. This is the largest message size X.25 will handle from a client on a given Logical Channel. Changing this attribute enables X.25 to handle client messages up to 4096 bytes in length
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1600..4096  

wfLapbPktTranspacCauseCodeEnable 1.3.6.1.4.1.18.3.5.9.4.5.1.59
Use Transpac Cause Codes , default = disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfLapbPktTxMbsQueueThreshold 1.3.6.1.4.1.18.3.5.9.4.5.1.60
The maximum number of packets that TX mbs queue can hold. If X.25 receives more packets and TX mbs queue count reaches this maximum, it will open up another SVC connection. The default is zero and the maximum queue count is equal to wfLapbPktDefWindow + 1, which is three.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

wfLapbPktBackupDebugLvl 1.3.6.1.4.1.18.3.5.9.4.5.1.61
Debug level for X.25 backup messages
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), debug(4)  

wfLapbPktBackupEnable 1.3.6.1.4.1.18.3.5.9.4.5.1.62
Backup Enable/Disable parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfLapbPktStatsTable 1.3.6.1.4.1.18.3.5.9.4.6
The table of LAPB PKT Level Statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfLapbPktStatsEntry

wfLapbPktStatsEntry 1.3.6.1.4.1.18.3.5.9.4.6.1
Packet level statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfLapbPktStatsEntry  

wfLapbPktStatsSlotNum 1.3.6.1.4.1.18.3.5.9.4.6.1.1
Slot number and instance ID for this Lapb Packet Layer Line instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktStatsConnector 1.3.6.1.4.1.18.3.5.9.4.6.1.2
Port number and instance ID for this Lapb Packet Layer Line instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktStatsLineNumber 1.3.6.1.4.1.18.3.5.9.4.6.1.3
Instance identifier member. This is the line number assigned to the driver X.25 is running over. No used in 7.60
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktStatsLLIndex 1.3.6.1.4.1.18.3.5.9.4.6.1.4
Instance identifier member. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a driver, the index will be 0. Not used in 7.60.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktStatsCct 1.3.6.1.4.1.18.3.5.9.4.6.1.5
Circuit number for this instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfLapbPktStatsLineAddress 1.3.6.1.4.1.18.3.5.9.4.6.1.6
The local X.121 address of this line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

wfLapbPktStatsMaxVcs 1.3.6.1.4.1.18.3.5.9.4.6.1.7
Maximum number of Virtual Circuits allowed on this line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsActiveVcs 1.3.6.1.4.1.18.3.5.9.4.6.1.8
Number of Active Virtual Circuits on this line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsActiveMax 1.3.6.1.4.1.18.3.5.9.4.6.1.9
Highest number of active Virtual Circuits on this line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsTotalConnections 1.3.6.1.4.1.18.3.5.9.4.6.1.10
Number of Total Virtual Connections performed since start up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsFailedConnections 1.3.6.1.4.1.18.3.5.9.4.6.1.11
Number of unsuccessful Virtual Connections performed since start up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsNormalDisconnects 1.3.6.1.4.1.18.3.5.9.4.6.1.12
Number of Normal Virtual Circuit Disconnections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsAbnormalDisconnects 1.3.6.1.4.1.18.3.5.9.4.6.1.13
Number of Abnormal Virtual Circuit Disconnections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsDataTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.14
Number of Data Packets Transmitted on this line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsInterruptTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.15
Number of Interrupt Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsResetTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.16
Number of Reset Requests sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsRrTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.17
Number of Receiver Ready Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsRnrTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.18
Number of Receiver Not Ready Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsRejectTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.19
Number of Reject Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsRestartTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.20
Number of Restart Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsDiagTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.21
Number of Diagnostic Packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsSegmentTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.22
Number of Charge Units sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsBytesTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.23
Number of Data Bytes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsIntBytesTxs 1.3.6.1.4.1.18.3.5.9.4.6.1.24
Number of Interrupt Data Bytes sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsDataRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.25
Number of Data Packets received on this line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsInterruptRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.26
Number of Interrupt Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsResetRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.27
Number of Reset Requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsRrRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.28
Number of Receiver Ready Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsRnrRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.29
Number of Receiver Not Ready Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsRejectRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.30
Number of Reject Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsRestartRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.31
Number of Restart Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsDiagRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.32
Number of Diagnostic Packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsSegmentRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.33
Number of Charge Units received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsBytesRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.34
Number of Data Bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsIntBytesRxs 1.3.6.1.4.1.18.3.5.9.4.6.1.35
Number of Interrupt Data Bytes received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfLapbPktStatsOnOffSwitch 1.3.6.1.4.1.18.3.5.9.4.6.1.36
This tells the user if Statistics Computation is turned ON or OFF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25PvcServiceTable 1.3.6.1.4.1.18.3.5.9.4.7
the table of Lapb Pvc Packet level parameters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfX25PvcServiceEntry

wfX25PvcServiceEntry 1.3.6.1.4.1.18.3.5.9.4.7.1
An entry in the LAPB PKT table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfX25PvcServiceEntry  

wfX25PvcDelete 1.3.6.1.4.1.18.3.5.9.4.7.1.1
Create/Delete parameter, Default is created
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfX25PvcDisable 1.3.6.1.4.1.18.3.5.9.4.7.1.2
Enable/Disable Parameter
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfX25SlotNum 1.3.6.1.4.1.18.3.5.9.4.7.1.3
Part of the Instance Identifier. This is the slot number where this X25 packet layer is running
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25Connector 1.3.6.1.4.1.18.3.5.9.4.7.1.4
Part of the Instance Identifier. This is the physical connector number for the physical layer associated with this packet layer
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25LineNumber 1.3.6.1.4.1.18.3.5.9.4.7.1.5
Part of the Instance Id. This is the line number assigned to the LAPB driver associated with the X25 Packet layer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25LLIndex 1.3.6.1.4.1.18.3.5.9.4.7.1.6
Instance identifier. This is the lower layer index presented to X25 by the layer immediately below it on the protocol stack. If the lower layer is a driver, the index will be 0. Not used in 7.60.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25PvcServiceCct 1.3.6.1.4.1.18.3.5.9.4.7.1.7
Instance Id. This is the Circuit number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25PvcServiceIndex 1.3.6.1.4.1.18.3.5.9.4.7.1.8
Instace Id. This is the lcn on which this pvc is running
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfX25PvcServiceType 1.3.6.1.4.1.18.3.5.9.4.7.1.9
Type of Service for this PVC Service record
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pdntype(1), ddntype(2), ptoptype(4), npttype(8), ipextype(16), qllctype(32)  

wfX25PvcRxDefWindow 1.3.6.1.4.1.18.3.5.9.4.7.1.10
This is the receive window size used for setting up the pvc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

wfX25PvcTxDefWindow 1.3.6.1.4.1.18.3.5.9.4.7.1.11
This is the transmit window size used for setting up the pvc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

wfX25PvcRxDefLength 1.3.6.1.4.1.18.3.5.9.4.7.1.12
This is the receive packet size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size16(4), size32(5), size64(6), size128(7), size256(8), size512(9), size1024(10), size2048(11), size4096(12)  

wfX25PvcTxDefLength 1.3.6.1.4.1.18.3.5.9.4.7.1.13
This is the trasmit packet size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size16(4), size32(5), size64(6), size128(7), size256(8), size512(9), size1024(10), size2048(11), size4096(12)  

wfX25PvcRxDefClass 1.3.6.1.4.1.18.3.5.9.4.7.1.14
This is the receive througput class value that can be used on a per pvc basis. For this to be effective, the wfX25Throughput must be set ON
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER thrclass75(3), thrclass150(4), thrclass300(5), thrclass600(6), thrclass1200(7), thrclass2400(8), thrclass4800(9), thrclass9600(10), thrclass19200(11), thrclass48k(12), thrclass64k(13)  

wfX25PvcTxDefClass 1.3.6.1.4.1.18.3.5.9.4.7.1.15
This is the transmit througput class value that can be used on a per pvc basis. For this to be effective, the wfX25Throughput must be set ON
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER thrclass75(3), thrclass150(4), thrclass300(5), thrclass600(6), thrclass1200(7), thrclass2400(8), thrclass4800(9), thrclass9600(10), thrclass19200(11), thrclass48k(12), thrclass64k(13)  

wfX25QllcAddrMapTable 1.3.6.1.4.1.18.3.5.9.4.8
table of X.121 address to LLC Mac address mappings.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfX25QllcAddrMapEntry

wfX25QllcAddrMapEntry 1.3.6.1.4.1.18.3.5.9.4.8.1
An entry in the QLLC Address Mapping table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfX25QllcAddrMapEntry  

wfX25QllcAddrMapDelete 1.3.6.1.4.1.18.3.5.9.4.8.1.1
Create/Delete parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfX25QllcAddrMapDisable 1.3.6.1.4.1.18.3.5.9.4.8.1.2
Enable/Disable parameter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfX25QllcAddrMapState 1.3.6.1.4.1.18.3.5.9.4.8.1.3
The current state of the QLLC Mapping.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), notactive(2), notpresent(3)  

wfX25QllcAddrMapCct 1.3.6.1.4.1.18.3.5.9.4.8.1.4
Circuit number and instance ID member.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

wfX25QllcAddrMapIndex 1.3.6.1.4.1.18.3.5.9.4.8.1.5
X.25 QLLC Address Map entry record ID for this instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4000  

wfX25QllcAddrMapPartnerX121 1.3.6.1.4.1.18.3.5.9.4.8.1.6
The X.121 address of a X.25 device emulated by this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfX25QllcAddrMapAdjacentX121 1.3.6.1.4.1.18.3.5.9.4.8.1.7
The X.121 address of a X.25 device connecting thru this interface. This address may contain wildcard characters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

wfX25QllcAddrMapPid 1.3.6.1.4.1.18.3.5.9.4.8.1.8
QLLC Protocol ID used in the first byte of Call User Data of the X.25 Call Request packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

wfX25QllcAddrMapPartnerMac 1.3.6.1.4.1.18.3.5.9.4.8.1.9
The LLC MAC address of a LLC device connecting thru this interface. The LLC MAC address may contain wildcard characters, see wfX25QllcAddrMapOptions attribute below.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wfX25QllcAddrMapPartnerSap 1.3.6.1.4.1.18.3.5.9.4.8.1.10
The SAP of a LLC device connecting thru this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

wfX25QllcAddrMapAdjacentMac 1.3.6.1.4.1.18.3.5.9.4.8.1.11
The LLC MAC address of a LLC device emulated by this interface. If set to nil, a LLC MAC address will be dynamically assign by X.25 from an address pool defined in the X.25 Service Record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

wfX25QllcAddrMapAdjacentSap 1.3.6.1.4.1.18.3.5.9.4.8.1.12
The SAP of a LLC device emulated by this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

wfX25QllcAddrMapOptions 1.3.6.1.4.1.18.3.5.9.4.8.1.13
This object is a bitmask, setting individual bit postions enable the option. Values may be added together to enable multiple options. Hex Dec Value Value Options --------------------------------------------------------- 0x0001 1 Do not wait for Adjacent DTE/DCE to send an QXID before forwarding an QXID to it. 0x0002 2 Enable when SDLC endstations are connecting to QLLC hosts that do not support receipt of XID polls and do not retransmit XIDs. 0x0004 4 wfX25QllcAddrMapPartnerMac field contains wildcard characters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfX25QllcAddrMapTrace 1.3.6.1.4.1.18.3.5.9.4.8.1.14
This object is a bitmask, setting individual bit postions enable logging of internal QLLC messages and events. Values may be added together to enable multiple message groups. Hex Dec Value Value Message/Event --------------------------------------------------------- 0x0001 1 Enable QLLC logging. 0x0002 2 Data frames/packets. 0x0004 4 Flow Control messages. 0x0008 8 Client registration messages. 0x0010 16 X.25 session establishment messages. 0x0020 32 Test frames/packets. 0x0040 64 XID frames/packes. 0x0080 128 Set Mode frames/packets. 0x0100 256 Disconnect frames/packets. 0x0200 512 Configuration changes. 0x0400 1024 Death of client (DLSw or APPN). 0x0800 2048 Data Path (DP) messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfX25QllcAddrMapPuType 1.3.6.1.4.1.18.3.5.9.4.8.1.15
PU type (T2.0 or T2.1) of the locally attached QLLC device.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER pu21(1), pu20(2)  

wfX25QllcAddrMapGenXid 1.3.6.1.4.1.18.3.5.9.4.8.1.16
Simulate receiving an XID command from the QLLC device. This object should be enabled when an PU 2.0 QLLC device is connecting thru DLSw to an non-X.25 host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfX25QllcAddrMapNodeId 1.3.6.1.4.1.18.3.5.9.4.8.1.17
The 8 hexadecimal digit Node Identification field of the simulated XID (see wfX25QllcAddrMapGenXid object). This field has two sub-fields, ID Block and ID Number. The first 3 hexadecimal digits are the ID block value and the last 5 hexadecimal digits are the ID Number value.
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wfX25QllcAddrMapName 1.3.6.1.4.1.18.3.5.9.4.8.1.18
A informational name for this QLLC Mapping.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString