X733GROUP-MIB

File: X733GROUP-MIB.mib (29453 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC

Imported symbols

Integer32 MODULE-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE enterprises DisplayString

Defined Values

sni 1.3.6.1.4.1.231
OBJECT IDENTIFIER    

siemensUnits 1.3.6.1.4.1.231.7
OBJECT IDENTIFIER    

oenProductMibs 1.3.6.1.4.1.231.7.1
OBJECT IDENTIFIER    

nms 1.3.6.1.4.1.231.7.1.3
OBJECT IDENTIFIER    

ncProxy 1.3.6.1.4.1.231.7.1.3.1
OBJECT IDENTIFIER    

ewsdAlarms 1.3.6.1.4.1.231.7.1.3.1.1
This MIB module implements X733 Alarms which are extracted from MML alarms (EWSD classic), from SNMP alarms (EWSD InterNode and other SNMP managed devices) and from Q3 alarms (EWSD PowerNode). According to this distinction, different traps for spontaneous alarms are defined. This MIB module is compatible to previous versions which did not support SNMP and Q3 alarms, and countAlarms with the number of major, critical and minor alarms of the relevant Network Element.
MODULE-IDENTITY    

commonGroup 1.3.6.1.4.1.231.7.1.3.1.1.1
OBJECT IDENTIFIER    

controlGroup 1.3.6.1.4.1.231.7.1.3.1.1.2
OBJECT IDENTIFIER    

summaryGroup 1.3.6.1.4.1.231.7.1.3.1.1.3
OBJECT IDENTIFIER    

miscGroup 1.3.6.1.4.1.231.7.1.3.1.1.4
OBJECT IDENTIFIER    

x733Group 1.3.6.1.4.1.231.7.1.3.1.1.5
OBJECT IDENTIFIER    

q3Group 1.3.6.1.4.1.231.7.1.3.1.1.6
OBJECT IDENTIFIER    

osGroup 1.3.6.1.4.1.231.7.1.3.1.1.7
OBJECT IDENTIFIER    

neName 1.3.6.1.4.1.231.7.1.3.1.1.1.1
name of the EWSD
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

managedObjectClass 1.3.6.1.4.1.231.7.1.3.1.1.1.2
naming attribute of the class of alarm Object (only EWSD classic); possible values: DLU, SAL, MAL, LTG, SN, MB ...
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

notificationId 1.3.6.1.4.1.231.7.1.3.1.1.1.3
corresponds to X.721/X.733:NotificationIdentifier - an ascii string uniquely identifying an alarm within all EWSDs.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

globalAlarmIds 1.3.6.1.4.1.231.7.1.3.1.1.1.4
an ascii string containing 0..64 commaseparated strings uniquely identifying an alarm within all EWSDs.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

setPeriod 1.3.6.1.4.1.231.7.1.3.1.1.2.1
defines the time period for the periodical alarm summaries unit of measurement: 8 minutes, initially set to 1 (i.e. 8 minutes).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

sendSummary 1.3.6.1.4.1.231.7.1.3.1.1.2.2
The value must be a neName. Setting a value causes an immediate alarm status summary with respect to the chosen EWSD( forced alarm status summary). Possible EWSD names can be learned from the periodical status summary alarms.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

resendAlarm 1.3.6.1.4.1.231.7.1.3.1.1.2.3
The value must be a notificationID. Setting a value causes an immediate alarm notification. Possible notificationIDs can be learned from the status summary alarms.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sendAllAlarms 1.3.6.1.4.1.231.7.1.3.1.1.2.4
Whenever this object is set to any (!) integer value all open Alarms will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4294967295  

alarmSpontan 1.3.6.1.4.1.231.7.1.3.1.1.2.5
Setting to no(2) disables sending of spontaneousAlarms, default: yes(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

countAlarmPeriod 1.3.6.1.4.1.231.7.1.3.1.1.2.6
defines the time period for the periodic count alarms unit of measurement: 8 minutes; initially set to 0 (which means no periodic count alarms.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

countAlarmSpontan 1.3.6.1.4.1.231.7.1.3.1.1.2.7
Setting to yes(1) enables sending of spontaneous count alarms default: no(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

numberOfAlarms 1.3.6.1.4.1.231.7.1.3.1.1.3.1
Total number of open alarms of the relevant EWSD.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

connectionReliable 1.3.6.1.4.1.231.7.1.3.1.1.3.2
The connection to the relevant EWSD is reliable if the last information exchange with ADS is not longer than 8 minutes ago (valid for MML alarms).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

critical 1.3.6.1.4.1.231.7.1.3.1.1.3.3
Total number of critical alarms of the relevant EWSD.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

major 1.3.6.1.4.1.231.7.1.3.1.1.3.4
Total number of major alarms of the relevant EWSD.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

minor 1.3.6.1.4.1.231.7.1.3.1.1.3.5
Total number of minor alarms of the relevant EWSD.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

timePeriod 1.3.6.1.4.1.231.7.1.3.1.1.4.3
actual value of time period for alarm summaries - unit of measurement: 8 minutes - initially set to 1 (i.e. 8 minutes)
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..60  

q3AlarmNumber 1.3.6.1.4.1.231.7.1.3.1.1.4.4
number of q3Alarm traps in which a Q3 alarm is divided (with CONTINUE_FLAG). Started from value 0, if it's not the last trap for this alarm value is incremented with 9000. A complete Q3 alarm consists of one q3Alarm trap, plus 'q3AlarmNumber' q3contAlarm traps.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..9999  

eventType 1.3.6.1.4.1.231.7.1.3.1.1.5.1
last component of the respective OID defined in X.721.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER indeterminate(0), communicationsAlarm(2), enviromentalAlarm(3), equipmentAlarm(4), integrityViolation(5), operationalViolation(8), physicalViolation(9), processingErrorAlarm(10), qualityOfServiceAlarm(11), securityServiceOrMechanismViolation(13), timeDomainViolation(15)  

severity 1.3.6.1.4.1.231.7.1.3.1.1.5.2
corresponds to X.721/X.733:PerceivedSeverity.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER indeterminate(0), critical(1), major(2), minor(3), warning(4), cleared(5)  

probableCause 1.3.6.1.4.1.231.7.1.3.1.1.5.3
corresponds to X.721/X.733:ProbableCause.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

originalAlarm 1.3.6.1.4.1.231.7.1.3.1.1.5.4
corresponds to X.721/X.733:AdditionalText: The original EWSD alarm (max. 8 kByte) for EWSD classic, formatted output for SNMP traps and Q3 alarms
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

processingStatus 1.3.6.1.4.1.231.7.1.3.1.1.5.5
An element of X.721:SpecificProblem
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER not-processed(0), in-process(1), under-repair(2), deferred(3), cleared(4)  

alarmClass 1.3.6.1.4.1.231.7.1.3.1.1.5.6
An element of X.721:AdditionalInformation; can be seen as a CMIS-ManagedObjectClass-field if an object model with a finer granularity would be defined; example: SLM (subscriber line module) identifies a line card
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

managedObjectInstance 1.3.6.1.4.1.231.7.1.3.1.1.5.7
An element of X.721:AdditionalInformation; can be seen as a part of the CMIS-ManagedObjectInstance-field if an object model with a finer granularity would be defined
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

rack 1.3.6.1.4.1.231.7.1.3.1.1.5.8
An element of X.721:AdditionalInformation
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..9999  

shelf 1.3.6.1.4.1.231.7.1.3.1.1.5.9
An element of X.721:AdditionalInformation
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..9999  

fromCard 1.3.6.1.4.1.231.7.1.3.1.1.5.10
An element of X.721:AdditionalInformation
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..9999  

toCard 1.3.6.1.4.1.231.7.1.3.1.1.5.11
An element of X.721:AdditionalInformation; - same value as fromCard: a single card is affected by the alarm - otherweise cards from fromCard to toCard are affected
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..9999  

fromPort 1.3.6.1.4.1.231.7.1.3.1.1.5.12
An element of X.721:AdditionalInformation
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..9999  

toPort 1.3.6.1.4.1.231.7.1.3.1.1.5.13
An element of X.721:AdditionalInformation; - same value as fromPort: a single port is affected by the alarm - otherweise ports from fromPort to toPort are affected
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..9999  

eventTime 1.3.6.1.4.1.231.7.1.3.1.1.5.14
An element of X.710: Parameter contains the time of generation of the event, if event time is sent from network element, otherwise it is the time of reception of the alarm by NetM The EventTime is a GeneralizedTime (defined in X.208), format is YYYYMMDDhhmmss.f+hhmm where Y year M month in year D day in month h hour in day (0-23) m minute in hour s second in minute f tenth part of second +hhmm local time offset(+-) to UTC time. Time represents the local time (t1), and the time differential (t2) enables UTC time to be determined as follows: UTC time = t1 - t2
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

ipAddress 1.3.6.1.4.1.231.7.1.3.1.1.5.15
An element of X.721:AdditionalInformation; indicates the source of the original SNMP trap.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

trapName 1.3.6.1.4.1.231.7.1.3.1.1.5.16
An element of X.721:AdditionalInformation; the name/OID of the original SNMP trap.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

specificProblems 1.3.6.1.4.1.231.7.1.3.1.1.5.17
corresponds to X.733:SpecificProblems; further refinements to the ProbableCause; example: the value of 'slmiAlarmStateReason' for an 'slmiAlarmStateTrap'.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

additionalText 1.3.6.1.4.1.231.7.1.3.1.1.5.18
This parameter allows the inclusion of a set of additional information in the event report.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..2048)  

additionalInformation 1.3.6.1.4.1.231.7.1.3.1.1.5.19
This parameter allows the inclusion of a set of additional information in the event report.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

backupStatus 1.3.6.1.4.1.231.7.1.3.1.1.6.1
This parameter specifies whether or not the object emitting the alarm has been backed-up.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

backupObject 1.3.6.1.4.1.231.7.1.3.1.1.6.2
This parameter specifies the managed object instance that is providing backup services for the managed object about which the notification pertains.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

trendIndication 1.3.6.1.4.1.231.7.1.3.1.1.6.3
This parameter, when present, specifies the current severity trend of the managed object.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER moresevere(1), nochange(2), lesssevere(3)  

thresholdInformation 1.3.6.1.4.1.231.7.1.3.1.1.6.4
This parameter shall be present when the alarm is a result of crossing a threshold.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

correlatedEvents 1.3.6.1.4.1.231.7.1.3.1.1.6.5
an ascii string containing comma-separated notifications, considered to be correlated.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

stateChanges 1.3.6.1.4.1.231.7.1.3.1.1.6.6
This parameter is used to indicate a state transition associated with the alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

monitoredAttributes 1.3.6.1.4.1.231.7.1.3.1.1.6.7
an ascii string containing comma-separated List of Monitored Attributes( attribute:value ).
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

securityAlarmDetector 1.3.6.1.4.1.231.7.1.3.1.1.6.8
This attribute identifies the entity that detected the security alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

serviceUser 1.3.6.1.4.1.231.7.1.3.1.1.6.9
This attribute contains information about the service user associated with the service request that caused the security alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

serviceProvider 1.3.6.1.4.1.231.7.1.3.1.1.6.10
This attribute contains information about the service provider associated with the service request that caused the security alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

listOfFaultyBoards 1.3.6.1.4.1.231.7.1.3.1.1.6.11
PowerNode equipment alarms contain a list of faulty boards. This information exactly defines the boards, which must be considered for repair/replacement. An ascii string containing comma-separated items. Each item contains: Module_name:LocationName:RackID:ShelfID:PitchID
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..8192)  

mmnKey 1.3.6.1.4.1.231.7.1.3.1.1.7.1
This identifies the Help Topic for the OS Alarm in the OS Alarm Help file. The format of the MMN key for the Basic Components: BASE__
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

thresholdValue 1.3.6.1.4.1.231.7.1.3.1.1.7.2
This attribute is relevant only for OS Threshold Alarms. - specifies the threshold value for any counter/monitored object, which is allowed and can be tolerated
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..4294967295  

currentValue 1.3.6.1.4.1.231.7.1.3.1.1.7.3
This attribute is relevant only for OS Threshold Alarms. - specifies the current value for the measurements, which has violated th threhold value of monitored measurements
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..4294967295  

summaryAlarms 1.3.6.1.4.1.231.7.1.3.1.1.5.201
This trap will be sent periodically or after an explicit request via SNMP set. It is useful for these reasons: - to notice that the connection to NetM is reliable - to notice that the connection from NetM to an EWSD is reliable - to learn the names of EWSDs under control of NetM - to notice that traps got lost.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

spontaneousAlarms 1.3.6.1.4.1.231.7.1.3.1.1.5.202
Spontaneous Alarm from EWSD classic (MML). This trap will notify management systems after notifications from the EWSD classic. This trap type will be sent also in case of a 'resend' request. Each spontaneous alarm contains the variable binding 'originalAlarm' representing the original EWSD alarm. This information can be very large ( about 8 Kbyte).
Status: current Access: not-accessible
NOTIFICATION-TYPE    

snmpAlarm 1.3.6.1.4.1.231.7.1.3.1.1.5.203
Spontaneous Alarm from EWSD InterNode or other SNMP managed devices. This trap will notify management systems after an SNMP alarm trap has been received by NetM. This trap type will be sent also in case of a 'resend' request. Each snmpAlarm trap contains the formatted output of the original SNMP trap in 'originalAlarm'.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

q3Alarm 1.3.6.1.4.1.231.7.1.3.1.1.5.204
Spontaneous Alarm from EWSD PowerNode. This trap will notify management systems after a Q3 alarm has been received from EWSD PowerNode. This trap type will be sent also in case of a 'resend' request. Each q3Alarm trap contains the formatted output of the original PowerNode trap in 'originalAlarm'. If the size of q3alarm exceeds 10KB, or one of the variables exceeds 8KB, 'q3alarm' is followed by 'q3contAlarm'. 'q3AlarmNumber' is 0 if the whole Q3 alarm is contained, or 9000 if it is continued with a 'q3contAlarm' sequence.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

q3contAlarm 1.3.6.1.4.1.231.7.1.3.1.1.5.205
Continuation of a Q3 Alarm. If the size of the trap exceeds 10KB, or one of the variables exceeds 8KB, the next 'q3contAlarm' is generated. In 'q3AlarmNumber' there is the sequence number and a flag (9000) if it continues with a new 'q3contAlarm'.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

timeAckAlarms 1.3.6.1.4.1.231.7.1.3.1.1.5.206
A 'timeAckAlarms' trap is sent as acknowledgement for a 'setPeriod' set request.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

proxyStartUp 1.3.6.1.4.1.231.7.1.3.1.1.5.207
A 'proxyStartUp' trap is sent if the proxy comes up.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

countAlarm 1.3.6.1.4.1.231.7.1.3.1.1.5.208
Spontaneous or periodical trap, which contains the number of critical, major and minor alarms for a Network Element. Spontaneous: if the number of critical, major or minor alarms for a Network Element has changed. Periodical: depending on the setting of 'countAlarmPeriod'.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

osAlarm 1.3.6.1.4.1.231.7.1.3.1.1.5.209
Spontaneous OS Alarm from NetManager. This trap will notify management systems after a OS alarm has been generated from the NetManager. This trap type will be sent also in case of a 'resend' request. NeName is filled up with OS Name. Notification ID has form: OS_
Status: current Access: not-accessible
NOTIFICATION-TYPE