XYLAN-HEALTH-MIB

File: XYLAN-HEALTH-MIB.mib (68616 bytes)

Imported modules

RFC-1212

XYLAN-BASE-MIB

Imported symbols

OBJECT-TYPE

xylanHealthArch

Defined Types

HealthModuleEntry
SEQUENCE
	healthModuleSlot	INTEGER
	healthModuleRxData	OCTET STRING
	healthModuleRxTimeDelta	INTEGER
	healthModuleRxTxData	OCTET STRING
	healthModuleRxTxTimeDelta	INTEGER
	healthModuleBackplaneData	OCTET STRING
	healthModuleBackplaneTimeDelta	INTEGER
	healthModuleCamData	OCTET STRING
	healthModuleCamTimeDelta	INTEGER
	healthModuleCamNumInstalled	INTEGER
	healthModuleCamConfigured	INTEGER
	healthModuleCamAvail	INTEGER
	healthModuleCamAvailNonIntern	INTEGER
	healthModuleCamFree	INTEGER
	healthModuleVccData	OCTET STRING
	healthModuleVccTimeDelta	INTEGER

HealthThreshModuleSummaryEntry
SEQUENCE
	healthThreshModuleSummarySlot	INTEGER
	healthThreshModuleSummaryData	OCTET STRING

HealthThreshPortSummaryEntry
SEQUENCE
	healthThreshPortSummarySlot	INTEGER
	healthThreshPortSummaryIF	INTEGER
	healthThreshPortSummaryData	OCTET STRING

HealthPortUpDownStatus
INTEGER	healthPortDn(1), healthPortUp(2)

HealthPortEntry
SEQUENCE
	healthPortSlot	INTEGER
	healthPortIF	INTEGER
	healthPortUpDn	HealthPortUpDownStatus
	healthPortRxData	OCTET STRING
	healthPortRxTimeDelta	INTEGER
	healthPortRxTxData	OCTET STRING
	healthPortRxTxTimeDelta	INTEGER
	healthPortBackplaneData	OCTET STRING
	healthPortBackplaneTimeDelta	INTEGER
	healthPortVccData	OCTET STRING
	healthPortVccTimeDelta	INTEGER

Health2DeviceCpuEntry
SEQUENCE
	health2DeviceCpuNum	INTEGER
	health2DeviceCpuLatest	INTEGER
	health2DeviceCpu1MinAvg	INTEGER
	health2DeviceCpu1HrAvg	INTEGER
	health2DeviceCpu1HrMax	INTEGER

Health2ModuleEntry
SEQUENCE
	health2ModuleSlot	INTEGER
	health2ModuleRxLatest	INTEGER
	health2ModuleRx1MinAvg	INTEGER
	health2ModuleRx1HrAvg	INTEGER
	health2ModuleRx1HrMax	INTEGER
	health2ModuleRxTxLatest	INTEGER
	health2ModuleRxTx1MinAvg	INTEGER
	health2ModuleRxTx1HrAvg	INTEGER
	health2ModuleRxTx1HrMax	INTEGER
	health2ModuleBackplaneLatest	INTEGER
	health2ModuleBackplane1MinAvg	INTEGER
	health2ModuleBackplane1HrAvg	INTEGER
	health2ModuleBackplane1HrMax	INTEGER
	health2ModuleCamLatest	INTEGER
	health2ModuleCam1MinAvg	INTEGER
	health2ModuleCam1HrAvg	INTEGER
	health2ModuleCam1HrMax	INTEGER
	health2ModuleVccLatest	INTEGER
	health2ModuleVcc1MinAvg	INTEGER
	health2ModuleVcc1HrAvg	INTEGER
	health2ModuleVcc1HrMax	INTEGER

Health2PortEntry
SEQUENCE
	health2PortSlot	INTEGER
	health2PortIF	INTEGER
	health2PortRxLatest	INTEGER
	health2PortRx1MinAvg	INTEGER
	health2PortRx1HrAvg	INTEGER
	health2PortRx1HrMax	INTEGER
	health2PortRxTxLatest	INTEGER
	health2PortRxTx1MinAvg	INTEGER
	health2PortRxTx1HrAvg	INTEGER
	health2PortRxTx1HrMax	INTEGER
	health2PortBackplaneLatest	INTEGER
	health2PortBackplane1MinAvg	INTEGER
	health2PortBackplane1HrAvg	INTEGER
	health2PortBackplane1HrMax	INTEGER
	health2PortVccLatest	INTEGER
	health2PortVcc1MinAvg	INTEGER
	health2PortVcc1HrAvg	INTEGER
	health2PortVcc1HrMax	INTEGER

Defined Values

healthDeviceInfo		1.3.6.1.4.1.800.2.18.1
OBJECT IDENTIFIER

healthModuleInfo		1.3.6.1.4.1.800.2.18.2
OBJECT IDENTIFIER

healthPortInfo		1.3.6.1.4.1.800.2.18.3
OBJECT IDENTIFIER

healthGroupInfo		1.3.6.1.4.1.800.2.18.4
OBJECT IDENTIFIER

healthControlInfo		1.3.6.1.4.1.800.2.18.5
OBJECT IDENTIFIER

healthThreshInfo		1.3.6.1.4.1.800.2.18.6
OBJECT IDENTIFIER

health2DeviceInfo		1.3.6.1.4.1.800.2.18.7
OBJECT IDENTIFIER

health2ModuleInfo		1.3.6.1.4.1.800.2.18.8
OBJECT IDENTIFIER

health2PortInfo		1.3.6.1.4.1.800.2.18.9
OBJECT IDENTIFIER

healthDeviceRxData		1.3.6.1.4.1.800.2.18.1.1
Device-level input utilization information. Octet 0: average input utilization over the latest sample period (percent) Octet 1: average input utilization over the latest minute (percent) Octet 2: average input utilization over the latest hour (percent) Octet 3: maximum input utilization over the latest hour (percent) input utilization = total octets input / device capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthDeviceRxTimeDelta		1.3.6.1.4.1.800.2.18.1.2
Time since input usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceRxTxData		1.3.6.1.4.1.800.2.18.1.3
Device-level i/o utilization information. Octet 0: average i/o utilization over the latest sample period (percent) Octet 1: average i/o utilization over the latest minute (percent) Octet 2: average i/o utilization over the latest hour (percent) Octet 3: maximum i/o utilization over the latest hour (percent) i/o utilization = (total octets input + total octets output) / device capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthDeviceRxTxTimeDelta		1.3.6.1.4.1.800.2.18.1.4
Time since i/o usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceBackplaneData		1.3.6.1.4.1.800.2.18.1.5
Device-level backplane utilization information. Octet 0: average backplane utilization over the latest sample period (percent) Octet 1: average backplane utilization over the latest minute (percent) Octet 2: average backplane utilization over the latest hour (percent) Octet 3: maximum backplane utilization over the latest hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthDeviceBackplaneTimeDelta		1.3.6.1.4.1.800.2.18.1.6
Time since backplane usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceCamData		1.3.6.1.4.1.800.2.18.1.7
Device-level CAM utilization information. Octet 0: average MPM CAM utilization over the latest sample period (percent) Octet 1: average MPM CAM utilization over the latest minute (percent) Octet 2: average MPM CAM utilization over the latest hour (percent) Octet 3: maximum MPM CAM utilization over the latest hour (percent) Octet 4: average HRE CAM utilization over the latest minute (percent) Octet 5: average HRE CAM utilization over the latest minute (percent) Octet 6: average HRE CAM utilization over the latest hour (percent) Octet 7: maximum HRE CAM utilization over the latest hour (percent) Octet 8: average HRE collision utilization over the latest minute (percent) Octet 9: average HRE collision utilization over the latest minute (percent) Octet 10: average HRE collision utilization over the latest hour (percent) Octet 11: maximum HRE collision utilization over the latest hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(12)

healthDeviceCamTimeDelta		1.3.6.1.4.1.800.2.18.1.8
Time since CAM usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceMemoryData		1.3.6.1.4.1.800.2.18.1.9
Device-level memory utilization information. Octet 0: average memory utilization over the latest sample period (percent) Octet 1: average memory utilization over the latest minute (percent) Octet 2: average memory utilization over the latest hour (percent) Octet 3: maximum memory utilization over the latest hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(12)

healthDeviceMemoryTimeDelta		1.3.6.1.4.1.800.2.18.1.10
Time since memory usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceCpuData		1.3.6.1.4.1.800.2.18.1.11
Device-level cpu utilization information. Octet 0: average cpu #1 utilization over the latest sample period (percent) Octet 1: average cpu #1 utilization over the latest minute (percent) Octet 2: average cpu #1 utilization over the latest hour (percent) Octet 3: maximum cpu #1 utilization over the latest hour (percent) Octet 4: average cpu #2 utilization over the latest sample period (percent) Octet 5: average cpu #2 utilization over the latest minute (percent) Octet 6: average cpu #2 utilization over the latest hour (percent) Octet 7: maximum cpu #2 utilization over the latest hour (percent) Octet 8: average cpu #3 utilization over the latest sample period (percent) Octet 9: average cpu #3 utilization over the latest minute (percent) Octet 10: average cpu #3 utilization over the latest hour (percent) Octet 11: maximum cpu #3 utilization over the latest hour (percent) Octet 12: average cpu #4 utilization over the latest sample period (percent) Octet 13: average cpu #4 utilization over the latest minute (percent) Octet 14: average cpu #4 utilization over the latest hour (percent) Octet 15: maximum cpu #4 utilization over the latest hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

healthDeviceCpuTimeDelta		1.3.6.1.4.1.800.2.18.1.12
Time since cpu usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceNumCpus		1.3.6.1.4.1.800.2.18.1.13
Number of CPUs on MPM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceMemoryTotal		1.3.6.1.4.1.800.2.18.1.14
Total memory available (octets).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceMemoryFree		1.3.6.1.4.1.800.2.18.1.15
Total memory free (octets).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceMpmCamTotal		1.3.6.1.4.1.800.2.18.1.16
Total entries in MPM CAM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceMpmCamFree		1.3.6.1.4.1.800.2.18.1.17
Free entries in MPM CAM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceHreCamTotal		1.3.6.1.4.1.800.2.18.1.18
Total entries in HRE CAM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceHreCamFree		1.3.6.1.4.1.800.2.18.1.19
Free entries in HRE CAM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceTemp		1.3.6.1.4.1.800.2.18.1.20
Current temperature of switch in degrees C x 10.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceIPRouteCacheFlushCount		1.3.6.1.4.1.800.2.18.1.21
Number of times IP route cache has been flushed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceIPXRouteCacheFlushCount		1.3.6.1.4.1.800.2.18.1.22
Number of times IPX route cache has been flushed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceMpmRxOverrunCount		1.3.6.1.4.1.800.2.18.1.23
Number of MPM receive overruns.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceMpmTxOverrunCount		1.3.6.1.4.1.800.2.18.1.24
Number of MPM transmit overruns.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceVccData		1.3.6.1.4.1.800.2.18.1.25
Device-level Vcc utilization information. Octet 0: average Vcc utilization over the latest sample period (percent) Octet 1: average Vcc utilization over the latest minute (percent) Octet 2: average Vcc utilization over the latest hour (percent) Octet 3: maximum Vcc utilization over the latest hour (percent) Vcc utilization = total active Vccs / device Vcc capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthDeviceVccTimeDelta		1.3.6.1.4.1.800.2.18.1.26
Time since Vcc usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceTemperatureData		1.3.6.1.4.1.800.2.18.1.27
Device-level temperature information. Octet 0: average temperature over the latest sample period (degrees Centigrade) Octet 1: average temperature over the latest minute (degrees Centigrade) Octet 2: average temperature over the latest hour (degrees Centigrade) Octet 3: maximum temperature over the latest hour (degrees centigrade).
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthDeviceTemperatureTimeDelta		1.3.6.1.4.1.800.2.18.1.28
Time since temperature updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceVpData		1.3.6.1.4.1.800.2.18.1.29
Device-level virtual port utilization information. Octet 0: average virtual port utilization over the latest sample period (percent) Octet 1: average virtual port utilization over the latest minute (percent) Octet 2: average virtual port utilization over the latest hour (percent) Octet 3: maximum virtual port utilization over the latest hour (percent) virtual port utilization = total active virtual ports / device virtual port capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthDeviceVpTimeDelta		1.3.6.1.4.1.800.2.18.1.30
Time since virtual port usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceHreCollisionTotal		1.3.6.1.4.1.800.2.18.1.31
Total collision entries available in HRE CAM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthDeviceHreCollisionFree		1.3.6.1.4.1.800.2.18.1.32
Free collision entries in HRE CAM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleTable		1.3.6.1.4.1.800.2.18.2.1
A list of installed modules in this chassis.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HealthModuleEntry

healthModuleEntry		1.3.6.1.4.1.800.2.18.2.1.1
A module entry containing objects for a module in a specific 'slot'.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	HealthModuleEntry

healthModuleSlot		1.3.6.1.4.1.800.2.18.2.1.1.1
The (one-based) front slot number within the chassis.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleRxData		1.3.6.1.4.1.800.2.18.2.1.1.2
Module-level input utilization information. Octet 0: average input utilization over the latest sample period (percent) Octet 1: average input utilization over the latest minute (percent) Octet 2: average input utilization over the latest hour (percent) Octet 3: maximum input utilization over the latest hour (percent) input utilization = total octets input / module capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthModuleRxTimeDelta		1.3.6.1.4.1.800.2.18.2.1.1.3
Time since input usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleRxTxData		1.3.6.1.4.1.800.2.18.2.1.1.4
Module-level i/o utilization information. Octet 0: average i/o utilization over the latest sample period (percent) Octet 1: average i/o utilization over the latest minute (percent) Octet 2: average i/o utilization over the latest hour (percent) Octet 3: maximum i/o utilization over the latest hour (percent) i/o utilization = (total octets input + total octets output) / module capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthModuleRxTxTimeDelta		1.3.6.1.4.1.800.2.18.2.1.1.5
Time since i/o usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleBackplaneData		1.3.6.1.4.1.800.2.18.2.1.1.6
Module-level backplane utilization information. Octet 0: average backplane utilization over the latest sample period (percent) Octet 1: average backplane utilization over the latest minute (percent) Octet 2: average backplane utilization over the latest hour (percent) Octet 3: maximum backplane utilization over the latest hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthModuleBackplaneTimeDelta		1.3.6.1.4.1.800.2.18.2.1.1.7
Time since backplane usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleCamData		1.3.6.1.4.1.800.2.18.2.1.1.8
Module-level CAM utilization information. Octet 0: average CAM utilization over the latest sample period (percent) Octet 1: average CAM utilization over the latest minute (percent) Octet 2: average CAM utilization over the latest hour (percent) Octet 3: maximum CAM utilization over the latest hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthModuleCamTimeDelta		1.3.6.1.4.1.800.2.18.2.1.1.9
Time since CAM usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleCamNumInstalled		1.3.6.1.4.1.800.2.18.2.1.1.10
The number of CAMs installed on the device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleCamConfigured		1.3.6.1.4.1.800.2.18.2.1.1.11
The number of CAM entries configured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleCamAvail		1.3.6.1.4.1.800.2.18.2.1.1.12
The number of CAM entries available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleCamAvailNonIntern		1.3.6.1.4.1.800.2.18.2.1.1.13
The number of CAM entries available for caching non-internal MAC Addresses.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleCamFree		1.3.6.1.4.1.800.2.18.2.1.1.14
The number of free CAM entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthModuleVccData		1.3.6.1.4.1.800.2.18.2.1.1.15
Module-level Vcc utilization information. Octet 0: average Vcc utilization over the latest sample period (percent) Octet 1: average Vcc utilization over the latest minute (percent) Octet 2: average Vcc utilization over the latest hour (percent) Octet 3: maximum Vcc utilization over the latest hour (percent) Vcc utilization = total active Vccs / module Vcc capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthModuleVccTimeDelta		1.3.6.1.4.1.800.2.18.2.1.1.16
Time since Vcc usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthSamplingInterval		1.3.6.1.4.1.800.2.18.5.1
Time interval between consecutive samples of resources. Units are seconds. Legal values are: 1,2,3,4,5,6,10,12,15,20,30. Default is 5.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

healthSamplingReset		1.3.6.1.4.1.800.2.18.5.2
Any set of this variable causes all health counters to reset to zero and a restart of sampling.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER

healthThreshDeviceRxLimit		1.3.6.1.4.1.800.2.18.6.1
Device input threshold value. Units are percent. Default is 80.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

healthThreshDeviceRxTxLimit		1.3.6.1.4.1.800.2.18.6.2
Device input/output threshold value. Units are percent. Default is 80.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

healthThreshDeviceBackplaneLimit		1.3.6.1.4.1.800.2.18.6.3
Device backplane threshold value. Units are percent. Default is 80.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

healthThreshDeviceCamLimit		1.3.6.1.4.1.800.2.18.6.4
Device Cam threshold value. Units are percent. Default is 80.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

healthThreshDeviceMemoryLimit		1.3.6.1.4.1.800.2.18.6.5
Device memory threshold value. Units are percent. Default is 80.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

healthThreshDeviceCpuLimit		1.3.6.1.4.1.800.2.18.6.6
Device Cpu threshold value. Units are percent. Default is 80.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

healthThreshDeviceSummary		1.3.6.1.4.1.800.2.18.6.7
Summary of current device thresholds. Octet 0 contains the device threshold-exceeded flag non-zero if any device threshold exceeded Octet 1 contains the device Rx threshold-exceeded flag non-zero if device Rx threshold exceeded Octet 2 contains the device RxTx threshold-exceeded flag non-zero if device RxTx threshold exceeded Octet 3 contains the device backplane threshold-exceeded flag non-zero if device backplane threshold exceeded Octet 4 contains the device CAM threshold-exceeded flag non-zero if device CAM threshold exceeded Octet 5 contains the device memory threshold-exceeded flag non-zero if device memory threshold exceeded Octet 6 contains the device CPU threshold-exceeded flag non-zero if device memory threshold exceeded Octet 7 contains the device VCC threshold-exceeded flag non-zero if device VCC threshold exceeded All the following values are percentages. Octet 8 contains device Rx threshold Octet 9 contains device Rx usage Octet 10 contains device RxTx threshold Octet 11 contains device RxTx usage Octet 12 contains device backplane threshold Octet 13 contains device backplane usage Octet 14 contains device CAM threshold Octet 15 contains device MPM CAM usage Octet 16 contains device HRE CAM usage Octet 17 contains device memory threshold Octet 18 contains device memory usage Octet 19 contains device CPU threshold Octet 20 contains device CPU#1 usage Octet 21 contains device CPU#2 usage Octet 22 contains device CPU#3 usage Octet 23 contains device CPU#4 usage Octet 24 contains device VCC threshold Octet 25 contains device VCC usage Octet 26 contains device HRE collision usage.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(27)

healthThreshModuleSummaryTable		1.3.6.1.4.1.800.2.18.6.8
A list of installed modules in this chassis.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HealthThreshModuleSummaryEntry

healthThreshModuleSummaryEntry		1.3.6.1.4.1.800.2.18.6.8.1
A module entry containing a summary of resource usage in a specific 'slot'.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	HealthThreshModuleSummaryEntry

healthThreshModuleSummarySlot		1.3.6.1.4.1.800.2.18.6.8.1.1
The (one-based) front slot number within the chassis.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..9

healthThreshModuleSummaryData		1.3.6.1.4.1.800.2.18.6.8.1.2
Summary of current module thresholds. Octet 0 contains the module threshold-exceeded flag non-zero if any module threshold exceeded Octet 1 contains the module Rx threshold-exceeded flag non-zero if module Rx threshold exceeded Octet 2 contains the module RxTx threshold-exceeded flag non-zero if module RxTx threshold exceeded Octet 3 contains the module backplane threshold-exceeded flag non-zero if module backplane threshold exceeded Octet 4 contains the module VCC threshold-exceeded flag non-zero if module VCC threshold exceeded Octet 5 contains the module CAM threshold-exceeded flag non-zero if module CAM threshold exceeded All the following values are percentages. Octet 6 contains module Rx threshold Octet 7 contains module Rx usage Octet 8 contains module RxTx threshold Octet 9 contains module RxTx usage Octet 10 contains module backplane threshold Octet 11 contains module backplane usage Octet 12 contains module VCC threshold Octet 13 contains module VCC usage Octet 14 contains module CAM threshold Octet 15 contains module CAM usage.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(16)

healthThreshDevTrapData		1.3.6.1.4.1.800.2.18.6.9
Contents of device-level rising/falling threshold trap. The format is as follows: Octet 1: length including this octet (L) Octet 2: number of threshold type/change pairs Octets 3 - L: type/change pairs each pair consists of one octet identifying the threshold type and one octet identifying the change type. Threshold type values: Rx threshold = 1 RxTx threshold = 2 Backplane threshold = 3 VCC threshold = 4 HRE CAM threshold = 5 MPM CAM threshold = 6 Memory threshold = 7 CPUn threshold = 7 + n (1 <= n <= 4) HRE collision threshold = 12 Change type values: falling threshold change = 1 rising threshold change = 2 Only those thresholds for which a threshold crossing event is detected will be present. This object is not intended to be accessed directly. It is defined for use in device-level rising/falling threshold traps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(0..21)

healthThreshModTrapCount		1.3.6.1.4.1.800.2.18.6.10
Number of modules with threshold crossing data in module-level rising/falling threshold trap. This object is not intended to be accessed directly. It is defined for use in module-level rising/falling threshold traps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

healthThreshModTrapData		1.3.6.1.4.1.800.2.18.6.11
Contents of module-level rising/falling threshold trap. The format is as follows: Octet 1: length including this octet (L) Octets 2 - L: module threshold trap data Within each module's data, the format is as follows: Octet 1: length including this octet Octet 2: number of threshold type/change pairs Octet 3: module slot number Octets 4 and following: type/change pairs each pair consists of one octet identifying the threshold type and one octet identifying the change type. Threshold type values: Rx threshold = 1 RxTx threshold = 2 Backplane threshold = 3 VCC threshold = 4 CAM threshold = 5 Change type values: falling threshold change = 1 rising threshold change = 2 Only those thresholds for which a threshold crossing event is detected will be present. This object is not intended to be accessed directly. It is defined for use in module-level rising/falling threshold traps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(0..128)

healthThreshPortSummaryTable		1.3.6.1.4.1.800.2.18.6.12
A list of port in this chassis.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HealthThreshPortSummaryEntry

healthThreshPortSummaryEntry		1.3.6.1.4.1.800.2.18.6.12.1
A module entry containing a summary of resource usage in a specific 'slot/port'.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	HealthThreshPortSummaryEntry

healthThreshPortSummarySlot		1.3.6.1.4.1.800.2.18.6.12.1.1
The (one-based) front slot number within the chassis.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..9

healthThreshPortSummaryIF		1.3.6.1.4.1.800.2.18.6.12.1.2
The on-board interface number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..9

healthThreshPortSummaryData		1.3.6.1.4.1.800.2.18.6.12.1.3
Summary of current port thresholds. Octet 0 contains the port threshold-exceeded flag non-zero if any port threshold exceeded Octet 1 contains the port Rx threshold-exceeded flag non-zero if port Rx threshold exceeded Octet 2 contains the port RxTx threshold-exceeded flag non-zero if port RxTx threshold exceeded Octet 3 contains the port backplane threshold-exceeded flag non-zero if port backplane threshold exceeded Octet 4 contains the port VCC threshold-exceeded flag non-zero if port VCC threshold exceeded All the following values are percentages. Octet 5 contains port Rx threshold Octet 6 contains port Rx usage Octet 7 contains port RxTx threshold Octet 8 contains port RxTx usage Octet 9 contains port backplane threshold Octet 10 contains port backplane usage Octet 11 contains port VCC threshold Octet 12 contains port VCC usage.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(13)

healthThreshPortTrapSlot		1.3.6.1.4.1.800.2.18.6.13
Number of the slot with threshold crossing data in port-level rising/falling threshold trap. This object is not intended to be accessed directly. It is defined for use in module-level rising/falling threshold traps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

healthThreshPortTrapCount		1.3.6.1.4.1.800.2.18.6.14
Number of threshold crossing entries in port-level rising/falling threshold trap. This object is not intended to be accessed directly. It is defined for use in port-level rising/falling threshold traps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

healthThreshPortTrapData		1.3.6.1.4.1.800.2.18.6.15
Contents of port-level rising/falling threshold trap. The format is as follows: Octet 1: length including this octet (L) Octets 2 - L: port threshold trap data, consisting of threshold crossing entries Within each threshold crossing entry, the format is as follows: Octet 1: length including this octet (l) Octet 2: type of threshold crossing Threshold crossing types are: Rx rising threshold = 1 Rx falling threshold = 2 RxTx rising threshold = 3 RxTx falling threshold = 4 Bkpl rising threshold = 5 Bkpl falling threshold = 6 Vcc rising threshold = 7 Vcc falling threshold = 8 Octets 3 - l: port bit mask This bit mask is ((N-1)/8)+1 octets long, where N is the number of ports on the module. Each port is represented by one bit in the mask. The bit for port 1 is the leftmost bit in octet 1 of the bit mask. The bit for port 8 is the rightmost bit in octet 1 of the bit mask. The bit for port 9 is the leftmost bit in octet 2 of the bit mask, and so on. Only those thresholds for which a threshold crossing event is detected will be present. This object is not intended to be accessed directly. It is defined for use in port-level rising/falling threshold traps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(0..255)

healthThreshDeviceVccLimit		1.3.6.1.4.1.800.2.18.6.16
Device VCC threshold value. Units are percent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

healthThreshDeviceTemperatureLimit		1.3.6.1.4.1.800.2.18.6.17
Device temperature threshold value. Units are degrees Centigrade.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

healthThreshDeviceVpLimit		1.3.6.1.4.1.800.2.18.6.18
Device virtual port threshold value. Units are percent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

healthPortMax		1.3.6.1.4.1.800.2.18.3.1
Maximum port utilization information. Octets 1 - 7: information for last cycle Octets 8 - 14: information for last minute Octets 15 - 21: information for last hour Within each group: first octet = slot second octet = interface third octet = percentage utlilization fourth through seventh octets = timestamp Timestamp value = octet 4 * 256*3 + octet 5 256*2 + octet 6 256 + octet 7. Timestamp units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(21)

healthPortTable		1.3.6.1.4.1.800.2.18.3.2
A list of Physical Port health instances.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HealthPortEntry

healthPortEntry		1.3.6.1.4.1.800.2.18.3.2.1
A Physical Port health entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	HealthPortEntry

healthPortSlot		1.3.6.1.4.1.800.2.18.3.2.1.1
The physical slot number for this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..9

healthPortIF		1.3.6.1.4.1.800.2.18.3.2.1.2
The on-board interface number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthPortUpDn		1.3.6.1.4.1.800.2.18.3.2.1.3
The status of this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	HealthPortUpDownStatus

healthPortRxData		1.3.6.1.4.1.800.2.18.3.2.1.4
Port-level input utilization information. Octet 0: average input utilization over the latest sample period (percent) Octet 1: average input utilization over the latest minute (percent) Octet 2: average input utilization over the latest hour (percent) Octet 3: maximum input utilization over the latest hour (percent) input utilization = total octets input / module capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthPortRxTimeDelta		1.3.6.1.4.1.800.2.18.3.2.1.5
Time since input usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthPortRxTxData		1.3.6.1.4.1.800.2.18.3.2.1.6
Port-level i/o utilization information. Octet 0: average i/o utilization over the latest sample period (percent) Octet 1: average i/o utilization over the latest minute (percent) Octet 2: average i/o utilization over the latest hour (percent) Octet 3: maximum i/o utilization over the latest hour (percent) i/o utilization = (total octets input + total octets output) / module capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthPortRxTxTimeDelta		1.3.6.1.4.1.800.2.18.3.2.1.7
Time since i/o usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthPortBackplaneData		1.3.6.1.4.1.800.2.18.3.2.1.8
Port-level backplane utilization information. Octet 0: average backplane utilization over the latest sample period (percent) Octet 1: average backplane utilization over the latest minute (percent) Octet 2: average backplane utilization over the latest hour (percent) Octet 3: maximum backplane utilization over the latest hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthPortBackplaneTimeDelta		1.3.6.1.4.1.800.2.18.3.2.1.9
Time since backplane usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

healthPortVccData		1.3.6.1.4.1.800.2.18.3.2.1.10
Port-level Vcc utilization information. Octet 0: average Vcc utilization over the latest sample period (percent) Octet 1: average Vcc utilization over the latest minute (percent) Octet 2: average Vcc utilization over the latest hour (percent) Octet 3: maximum Vcc utilization over the latest hour (percent) Vcc utilization = Vccs in use / port Vcc capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

healthPortVccTimeDelta		1.3.6.1.4.1.800.2.18.3.2.1.11
Time since Vcc usage updated. Units are 1/100 second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

health2DeviceRxLatest		1.3.6.1.4.1.800.2.18.7.1
Average device-level input utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceRx1MinAvg		1.3.6.1.4.1.800.2.18.7.2
Average device-level input utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceRx1HrAvg		1.3.6.1.4.1.800.2.18.7.3
Average device-level input utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceRx1HrMax		1.3.6.1.4.1.800.2.18.7.4
Maximum device-level input utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceRxTxLatest		1.3.6.1.4.1.800.2.18.7.5
Average device-level i/o utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceRxTx1MinAvg		1.3.6.1.4.1.800.2.18.7.6
Average device-level i/o utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceRxTx1HrAvg		1.3.6.1.4.1.800.2.18.7.7
Average device-level i/o utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceRxTx1HrMax		1.3.6.1.4.1.800.2.18.7.8
Maximum device-level i/o utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceBackplaneLatest		1.3.6.1.4.1.800.2.18.7.9
Average device-level backplane utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceBackplane1MinAvg		1.3.6.1.4.1.800.2.18.7.10
Average device-level backplane utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceBackplane1HrAvg		1.3.6.1.4.1.800.2.18.7.11
Average device-level backplane utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceBackplane1HrMax		1.3.6.1.4.1.800.2.18.7.12
Maximum device-level backplane utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceMpmCamLatest		1.3.6.1.4.1.800.2.18.7.13
Average MPM CAM utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceMpmCam1MinAvg		1.3.6.1.4.1.800.2.18.7.14
Average MPM CAM utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceMpmCam1HrAvg		1.3.6.1.4.1.800.2.18.7.15
Average MPM CAM utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceMpmCam1HrMax		1.3.6.1.4.1.800.2.18.7.16
Maximum MPM CAM utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceHreCamLatest		1.3.6.1.4.1.800.2.18.7.17
Average HRE CAM utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceHreCam1MinAvg		1.3.6.1.4.1.800.2.18.7.18
Average HRE CAM utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceHreCam1HrAvg		1.3.6.1.4.1.800.2.18.7.19
Average HRE CAM utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceHreCam1HrMax		1.3.6.1.4.1.800.2.18.7.20
Maximum HRE CAM utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceMemoryLatest		1.3.6.1.4.1.800.2.18.7.21
Average device-level memory utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceMemory1MinAvg		1.3.6.1.4.1.800.2.18.7.22
Average device-level memory utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceMemory1HrAvg		1.3.6.1.4.1.800.2.18.7.23
Average device-level memory utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceMemory1HrMax		1.3.6.1.4.1.800.2.18.7.24
Maximum device-level memory utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceNumCpus		1.3.6.1.4.1.800.2.18.7.25
Number of CPUs on MPM.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

health2DeviceCpuTable		1.3.6.1.4.1.800.2.18.7.26
A list of device-level CPU utilization data.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Health2DeviceCpuEntry

health2DeviceCpuEntry		1.3.6.1.4.1.800.2.18.7.26.1
A device-level CPU utilization entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Health2DeviceCpuEntry

health2DeviceCpuNum		1.3.6.1.4.1.800.2.18.7.26.1.1
MPM CPU number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

health2DeviceCpuLatest		1.3.6.1.4.1.800.2.18.7.26.1.2
Average device-level CPU utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceCpu1MinAvg		1.3.6.1.4.1.800.2.18.7.26.1.3
Average device-level CPU utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceCpu1HrAvg		1.3.6.1.4.1.800.2.18.7.26.1.4
Average device-level CPU utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceCpu1HrMax		1.3.6.1.4.1.800.2.18.7.26.1.5
Maximum device-level CPU utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceVccLatest		1.3.6.1.4.1.800.2.18.7.27
Average device-level VCC utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceVcc1MinAvg		1.3.6.1.4.1.800.2.18.7.28
Average device-level VCC utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceVcc1HrAvg		1.3.6.1.4.1.800.2.18.7.29
Average device-level VCC utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceVcc1HrMax		1.3.6.1.4.1.800.2.18.7.30
Maximum device-level VCC utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceTemperatureLatest		1.3.6.1.4.1.800.2.18.7.31
Average device temperature over the latest sample period (degrees Centigrade).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceTemperature1MinAvg		1.3.6.1.4.1.800.2.18.7.32
Average device temperature over the last minute (degrees Centigrade).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceTemperature1HrAvg		1.3.6.1.4.1.800.2.18.7.33
Average device temperature over the last hour (degrees centigrade).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceTemperature1HrMax		1.3.6.1.4.1.800.2.18.7.34
Maximum device temperature over the last hour (degrees Centigrade).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceVpLatest		1.3.6.1.4.1.800.2.18.7.35
Average device-level virtual port utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceVp1MinAvg		1.3.6.1.4.1.800.2.18.7.36
Average device-level virtual port utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceVp1HrAvg		1.3.6.1.4.1.800.2.18.7.37
Average device-level virtual port utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceVp1HrMax		1.3.6.1.4.1.800.2.18.7.38
Maximum device-level virtual port utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceHreCollisionLatest		1.3.6.1.4.1.800.2.18.7.39
Average HRE Collision utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceHreCollision1MinAvg		1.3.6.1.4.1.800.2.18.7.40
Average HRE Collision utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceHreCollision1HrAvg		1.3.6.1.4.1.800.2.18.7.41
Average HRE Collision utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2DeviceHreCollision1HrMax		1.3.6.1.4.1.800.2.18.7.42
Maximum HRE Collision utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleTable		1.3.6.1.4.1.800.2.18.8.1
A list of installed modules in this chassis.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Health2ModuleEntry

health2ModuleEntry		1.3.6.1.4.1.800.2.18.8.1.1
A module entry containing objects for a module in a specific 'slot'.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Health2ModuleEntry

health2ModuleSlot		1.3.6.1.4.1.800.2.18.8.1.1.1
The (one-based) front slot number within the chassis.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

health2ModuleRxLatest		1.3.6.1.4.1.800.2.18.8.1.1.2
Average module-level input utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleRx1MinAvg		1.3.6.1.4.1.800.2.18.8.1.1.3
Average module-level input utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleRx1HrAvg		1.3.6.1.4.1.800.2.18.8.1.1.4
Average module-level input utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleRx1HrMax		1.3.6.1.4.1.800.2.18.8.1.1.5
Maximum module-level input utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleRxTxLatest		1.3.6.1.4.1.800.2.18.8.1.1.6
Average module-level i/o utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleRxTx1MinAvg		1.3.6.1.4.1.800.2.18.8.1.1.7
Average module-level i/o utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleRxTx1HrAvg		1.3.6.1.4.1.800.2.18.8.1.1.8
Average module-level i/o utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleRxTx1HrMax		1.3.6.1.4.1.800.2.18.8.1.1.9
Maximum module-level i/o utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleBackplaneLatest		1.3.6.1.4.1.800.2.18.8.1.1.10
Average module-level backplane utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleBackplane1MinAvg		1.3.6.1.4.1.800.2.18.8.1.1.11
Average module-level backplane utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleBackplane1HrAvg		1.3.6.1.4.1.800.2.18.8.1.1.12
Average module-level backplane utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleBackplane1HrMax		1.3.6.1.4.1.800.2.18.8.1.1.13
Maximum module-level backplane utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleCamLatest		1.3.6.1.4.1.800.2.18.8.1.1.14
Average module-level CAM utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleCam1MinAvg		1.3.6.1.4.1.800.2.18.8.1.1.15
Average module-level CAM utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleCam1HrAvg		1.3.6.1.4.1.800.2.18.8.1.1.16
Average module-level CAM utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleCam1HrMax		1.3.6.1.4.1.800.2.18.8.1.1.17
Maximum module-level CAM utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleVccLatest		1.3.6.1.4.1.800.2.18.8.1.1.18
Average module-level VCC utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleVcc1MinAvg		1.3.6.1.4.1.800.2.18.8.1.1.19
Average module-level VCC utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleVcc1HrAvg		1.3.6.1.4.1.800.2.18.8.1.1.20
Average module-level VCC utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2ModuleVcc1HrMax		1.3.6.1.4.1.800.2.18.8.1.1.21
Maximum module-level VCC utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortTable		1.3.6.1.4.1.800.2.18.9.1
A list of Physical Port health instances.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Health2PortEntry

health2PortEntry		1.3.6.1.4.1.800.2.18.9.1.1
A Physical Port health entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Health2PortEntry

health2PortSlot		1.3.6.1.4.1.800.2.18.9.1.1.1
The physical slot number for this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..9

health2PortIF		1.3.6.1.4.1.800.2.18.9.1.1.2
The on-board interface number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

health2PortRxLatest		1.3.6.1.4.1.800.2.18.9.1.1.3
Average port-level input utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortRx1MinAvg		1.3.6.1.4.1.800.2.18.9.1.1.4
Average port-level input utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortRx1HrAvg		1.3.6.1.4.1.800.2.18.9.1.1.5
Average port-level input utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortRx1HrMax		1.3.6.1.4.1.800.2.18.9.1.1.6
Maximum port-level input utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortRxTxLatest		1.3.6.1.4.1.800.2.18.9.1.1.7
Average port-level i/o utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortRxTx1MinAvg		1.3.6.1.4.1.800.2.18.9.1.1.8
Average port-level i/o utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortRxTx1HrAvg		1.3.6.1.4.1.800.2.18.9.1.1.9
Average port-level i/o utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortRxTx1HrMax		1.3.6.1.4.1.800.2.18.9.1.1.10
Maximum port-level i/o utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortBackplaneLatest		1.3.6.1.4.1.800.2.18.9.1.1.11
Average port-level backplane utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortBackplane1MinAvg		1.3.6.1.4.1.800.2.18.9.1.1.12
Average port-level backplane utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortBackplane1HrAvg		1.3.6.1.4.1.800.2.18.9.1.1.13
Average port-level backplane utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortBackplane1HrMax		1.3.6.1.4.1.800.2.18.9.1.1.14
Maximum port-level backplane utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortVccLatest		1.3.6.1.4.1.800.2.18.9.1.1.15
Average port-level VCC utilization over the latest sample period (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortVcc1MinAvg		1.3.6.1.4.1.800.2.18.9.1.1.16
Average port-level VCC utilization over the last minute (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortVcc1HrAvg		1.3.6.1.4.1.800.2.18.9.1.1.17
Average port-level VCC utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

health2PortVcc1HrMax		1.3.6.1.4.1.800.2.18.9.1.1.18
Maximum port-level VCC utilization over the last hour (percent).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100