ZHONE-COM-VOIP-MIB

File: ZHONE-COM-VOIP-MIB.mib (47095 bytes)

Imported modules

INET-ADDRESS-MIB	NETWORK-SERVICES-MIB	SNMP-FRAMEWORK-MIB
SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
ZHONE-GEN-SUBSCRIBER	Zhone	Zhone-TC

Imported symbols

InetAddress	InetAddressType	applIndex
SnmpAdminString	OBJECT-GROUP	IpAddress
Integer32	Unsigned32	OBJECT-TYPE
MODULE-IDENTITY	OBJECT-IDENTITY	TruthValue
ZhoneCodecType	zhoneVoice	ZhoneRowStatus

Defined Types

ZhoneVoipSipDialPlanEntry
SEQUENCE
	zhoneVoipSipDialPlanId	INTEGER
	zhoneVoipSipDialString	SnmpAdminString
	zhoneVoipSipDialIpAddr	IpAddress
	zhoneVoipSipDialPlanRowStatus	ZhoneRowStatus
	zhoneVoipSipDialDestName	SnmpAdminString
	zhoneVoipSipDialNumOfDigits	INTEGER
	zhoneVoipSipDialPrefixStrip	INTEGER
	zhoneVoipSipDialPrefixAdd	SnmpAdminString
	zhoneVoipSipDialPlanType	INTEGER
	zhoneVoipServerEntryIndex	INTEGER
	zhoneVoipOverrideInterdigitTimeout	Integer32
	zhoneVoipSipDialPlanClass	BITS
	zhoneVoipSipDialPlanDescription	SnmpAdminString

ZhoneVoipHuntGroupEntry
SEQUENCE
	zhoneVoipHuntGroupId	INTEGER
	zhoneVoipHuntGroupDestUri	SnmpAdminString
	zhoneVoipHuntGroupDefaultCodec	ZhoneCodecType
	zhoneVoipHuntGroupPortMembers	BITS
	zhoneVoipHuntGroupRowStatus	ZhoneRowStatus

ZhoneVoipMaliciousCallerEntry
SEQUENCE
	zhoneVoipMaliciousCallerId	INTEGER
	zhoneVoipMaliciousCallerUri	SnmpAdminString
	zhoneVoipMaliciousCallerEnable	TruthValue
	zhoneVoipMaliciousCallerRowStatus	ZhoneRowStatus

ZhoneVoipServerEntry
SEQUENCE
	zhoneVoipServerAddressIndex	Unsigned32
	zhoneVoipServerRowStatus	ZhoneRowStatus
	zhoneVoipServerAddrType	InetAddressType
	zhoneVoipServerAddr	InetAddress
	zhoneVoipServerUdpPortNumber	Integer32
	zhoneVoipServerId	INTEGER
	zhoneVoipServerProtocol	INTEGER
	zhoneVoipServerSendCallProceedingTone	TruthValue
	zhoneVoipServerRtcpEnabled	TruthValue
	zhoneVoipServerRtcpPacketInterval	Integer32
	zhoneVoipServerInterDigitTimeout	Integer32
	zhoneVoipServerIpTos	Integer32
	zhoneVoipServerDomainName	SnmpAdminString
	zhoneVoipServerExpiresInvite	Unsigned32
	zhoneVoipServerExpiresRegister	Unsigned32
	zhoneVoipServerHeaderMethod	BITS
	zhoneVoipServerSessionTimer	INTEGER
	zhoneVoipServerSessionExpiration	Unsigned32
	zhoneVoipServerSessionMinSE	Unsigned32
	zhoneVoipServerSessionCallerReqTimer	INTEGER
	zhoneVoipServerSessionCalleeReqTimer	INTEGER
	zhoneVoipServerSessionCallerSpecifyRefresher	INTEGER
	zhoneVoipServerSessionCalleeSpecifyRefresher	INTEGER
	zhoneVoipServerDtmfMode	INTEGER
	zhoneVoipServerBehaviorStringOne	OCTET STRING
	zhoneVoipServerRtpTermIdSyntax	OCTET STRING
	zhoneVoipServerRtpDSCP	OCTET STRING
	zhoneVoipServerSignalingDSCP	OCTET STRING
	zhoneVoipServerDtmfPayloadId	Integer32
	zhoneVoipServerRegisterReadyTimeout	Unsigned32
	zhoneVoipServerMessageRetryCount	Integer32
	zhoneVoipServerFeatures	BITS
	zhoneVoipServerTransportProtocol	INTEGER
	zhoneVoipSigLocalPortNumber	Integer32

Defined Values

zhoneVoip		1.3.6.1.4.1.5504.4.3.4
Voice over IP configuration for Zhone products
MODULE-IDENTITY

zhoneVoipSystem		1.3.6.1.4.1.5504.4.3.4.1
Only SIP-PLAR is using this profile. The regular SIP and MGCP setting is moving to Voip-Server-Entry profile.
Status: deprecated	Access: read-only
OBJECT-IDENTITY

zhoneVoipSystemProtocol		1.3.6.1.4.1.5504.4.3.4.1.1
The signalling protocol used for VOIP. Choicees are SIP (Session Initiation Protocol) and MGCP (Media Gateway Control Protocol. Currently, the device only supports SIP.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	sip(1), mgcp(2)

zhoneVoipSystemSendCallProceedingTone		1.3.6.1.4.1.5504.4.3.4.1.2
Indicates whether, on call originations destined to the PSTN, the device should play a call proceeding tone while waiting for ring-back tone from the switch.
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

zhoneVoipSystemRtcpEnabled		1.3.6.1.4.1.5504.4.3.4.1.3
Indicates whether the Real-Time Control Protocol is enabled for the device.
Status: deprecated	Access: read-write
OBJECT-TYPE
	TruthValue

zhoneVoipSystemRtcpPacketInterval		1.3.6.1.4.1.5504.4.3.4.1.4
RTCP packet interval, in milleseconds. Range is 2500 to 10000 ms. This object's value is only pertinent if RTCP has been enabled.
Status: deprecated	Access: read-write
OBJECT-TYPE
	Integer32	2500..10000

zhoneVoipSystemInterdigitTimeout		1.3.6.1.4.1.5504.4.3.4.1.5
This parameter indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits.
Status: deprecated	Access: read-write
OBJECT-TYPE
	Integer32

zhoneVoipSystemIpTos		1.3.6.1.4.1.5504.4.3.4.1.6
This parameter indicates the tos value that is set in the ip header for voice of ip traffic.
Status: deprecated	Access: read-write
OBJECT-TYPE
	Integer32

zhoneVoipSystemDomainName		1.3.6.1.4.1.5504.4.3.4.1.7
This parameter is ignored.
Status: deprecated	Access: read-only
OBJECT-TYPE
	SnmpAdminString

zhoneVoipObjects		1.3.6.1.4.1.5504.4.3.4.2
Zhone VOIP objects.
Status: current	Access: read-only
OBJECT-GROUP

zhoneVoipSipDialPlan		1.3.6.1.4.1.5504.4.3.4.3
OBJECT IDENTIFIER

nextVoipSipDialPlanId		1.3.6.1.4.1.5504.4.3.4.3.1
Returns the next unused dial plan entry id.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneVoipSipDialPlanTable		1.3.6.1.4.1.5504.4.3.4.3.2
This table defines a dialing plan for POTS to SIP originations. A dialing plan consists of a series of acceptable dial strings and the corresponding IP addresses to which SIP control messages (e.g., Invite) are sent to initiate the call. Each dial string is represented as digits, wildcards, and regular-expression-like patterns as the following rules show: 1. A leading '' or '#' are allowed. 2. Digits 0-9 are allowed. 3. A wildcard 'x' represents any digit 0-9 4. A digit range can be specified using brackets [ ], as follows: [135] means a single digit with acceptable values 1,3, or 5. [1-4] means a single digit with acceptable values 1,2,3, or 4. Examples of valid dial strings: 911 - literal digit string 911 #87 - literal digit string #87 6x - 6 followed by any single digit 35xxx - 35 followed by any 3 digits 77xxx - 77 followed by any 3 digits 3[35]xxx - 33 or 35 followed by any 3 digits 31[1-3]xxxx - 311, 312, 313, followed by any 4 digits Notes: (1) The length of the dial string is limited 1o 128 characters (2) Though the dialplan supports the '#' and '' keys, the device may not support any features that use them (e.g., *69). (3) In the case where a collected digit set matches more than one dial string, the device will pick the dial string with the most leading literal digits that match. For example, given two dial strings: 35xxx 3[35]xxx and a collected digit set of 35123, the first dial plan string is selected because it contains two leading literal digits that match, as opposed to the second, which has only one leading literal digit. (4) Variable length dial strings, e.g. 353 followed by any number of digits, are not supported. (5) In the future, a dial string may be configurable such that it only applies to a subset of the supported ports (e.g., ports with international calling capabilities might be restricted). This is currently not supported; a dial string applies to all subscriberers. Support will be added for per-port control, most likely by adding port masks to the dial plan entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneVoipSipDialPlanEntry

zhoneVoipSipDialPlanEntry		1.3.6.1.4.1.5504.4.3.4.3.2.1
An entry in the SIP dial plan table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneVoipSipDialPlanEntry

zhoneVoipSipDialPlanId		1.3.6.1.4.1.5504.4.3.4.3.2.1.1
The unique identifier of the dial plan entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..2147483647

zhoneVoipSipDialString		1.3.6.1.4.1.5504.4.3.4.3.2.1.2
A dial string against which collected digits are matched.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(1..128)

zhoneVoipSipDialIpAddr		1.3.6.1.4.1.5504.4.3.4.3.2.1.3
Upon detecting a match between the collected digits and the dial string for this table entry, this IP address is used for SIP negotiations to initiate the call.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zhoneVoipSipDialPlanRowStatus		1.3.6.1.4.1.5504.4.3.4.3.2.1.4
The row status is used to create or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneVoipSipDialDestName		1.3.6.1.4.1.5504.4.3.4.3.2.1.5
Name of the destination for the dial string
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString

zhoneVoipSipDialNumOfDigits		1.3.6.1.4.1.5504.4.3.4.3.2.1.6
Number of digits to wait for before initiating the call
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..32

zhoneVoipSipDialPrefixStrip		1.3.6.1.4.1.5504.4.3.4.3.2.1.7
Number of prefix digits to strip from dialled digits
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..32

zhoneVoipSipDialPrefixAdd		1.3.6.1.4.1.5504.4.3.4.3.2.1.8
String to be added to the beginning of the dialled digits before call initiation
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString

zhoneVoipSipDialPlanType		1.3.6.1.4.1.5504.4.3.4.3.2.1.9
DialPlanType indicates the type of the dial plan. UA has to differenciate between normal dialing and dialing when call features like call park is initiated. The different kinds of dial plan types are: Normal Call Park ESA (Emergency stand alone) isdnsig (ISDN-PRI) Intercom
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	normal(1), callpark(2), esa(3), isdnsig(4), intercom(5)

zhoneVoipServerEntryIndex		1.3.6.1.4.1.5504.4.3.4.3.2.1.10
An index to associated voip-server-entry for this sip-dialplan.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..255

zhoneVoipOverrideInterdigitTimeout		1.3.6.1.4.1.5504.4.3.4.3.2.1.11
This parameter overrides the interdigit timeout in voip-system profile. It indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zhoneVoipSipDialPlanClass		1.3.6.1.4.1.5504.4.3.4.3.2.1.12
This parameter is used to configured the dial plan specific features.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	emergency(0)

zhoneVoipSipDialPlanDescription		1.3.6.1.4.1.5504.4.3.4.3.2.1.13
This field gives details about the sip-dialplan
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString

zhoneVoipHuntGroup		1.3.6.1.4.1.5504.4.3.4.4
OBJECT IDENTIFIER

nextZhoneVoipHuntGroupId		1.3.6.1.4.1.5504.4.3.4.4.2
Returns the next unused hunt group entry id.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneVoipHuntGroupTable		1.3.6.1.4.1.5504.4.3.4.4.3
A hunt groups is defined to map a SIP uniform resource identifier (URI) or dirctory number (DN) to multiple DS0s, to allow a greater number of incoming calls to that URI/DN. A hunt group consists of the following information: - the target DN/URI - the default codec to be used for the call, and - the DS0 ports in the hunt-group. Notes: A URI defined in a subscriber-voice-sip profile cannot also be defined as part of a hunt group. This is enforced by the device. A DS0 must be provisioned in the subVoiceSipTable before that DS0 can be used in a hunt group. This is enforced by the device. A DS0 may be part of more than one hunt group.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneVoipHuntGroupEntry

zhoneVoipHuntGroupEntry		1.3.6.1.4.1.5504.4.3.4.4.3.1
An entry in the hunt group table.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneVoipHuntGroupEntry

zhoneVoipHuntGroupId		1.3.6.1.4.1.5504.4.3.4.4.3.1.1
The unique identifier of the hunt group entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..2147483647

zhoneVoipHuntGroupDestUri		1.3.6.1.4.1.5504.4.3.4.4.3.1.2
The DN (directory number) or SIP URI (uniform resource identifier) being called. This is the called party from the incoming SIP Invite message.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(1..128)

zhoneVoipHuntGroupDefaultCodec		1.3.6.1.4.1.5504.4.3.4.4.3.1.3
The default codec to use for a call to a member of this hunt group.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneCodecType

zhoneVoipHuntGroupPortMembers		1.3.6.1.4.1.5504.4.3.4.4.3.1.4
Indicates which ports are contained in the hunt group.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9), port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19), port21(20), port22(21), port23(22), port24(23)

zhoneVoipHuntGroupRowStatus		1.3.6.1.4.1.5504.4.3.4.4.3.1.5
The row status is used to create or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneVoipMaliciousCaller		1.3.6.1.4.1.5504.4.3.4.5
OBJECT IDENTIFIER

nextVoipMaliciousCallerId		1.3.6.1.4.1.5504.4.3.4.5.1
eturns the next unused malicious caller entry index
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zhoneVoipMaliciousCallerTable		1.3.6.1.4.1.5504.4.3.4.5.2
This table defines a malicious caller whose call will be rejected if enabled. SIP terminal administrator needs to provision URI of this table exactly as it appears in the incoming session notification's(SIP INVITE) calling user's address-of-record(AOR) formatted as a SIP URI. The SIP URI can contain either a telephone number(RFC 2806) or an alphanumeric identification(RFC 2806) Entries in the table are case sensitive, shall not contain visual separations and have the exact length as it appears in the SIP INVITE message
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneVoipMaliciousCallerEntry

zhoneVoipMaliciousCallerEntry		1.3.6.1.4.1.5504.4.3.4.5.2.1
An entry in the malicious caller table
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneVoipMaliciousCallerEntry

zhoneVoipMaliciousCallerId		1.3.6.1.4.1.5504.4.3.4.5.2.1.1
The unique identifier of the malicious call reject entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..2147483647

zhoneVoipMaliciousCallerUri		1.3.6.1.4.1.5504.4.3.4.5.2.1.2
Incoming call from this URI will be rejected. The network operator is responsible for provisioning exactly as per appearance in the incoming session notification (SIP INVITE) the calling user's address-of-record (AOR) formatted as a SIP URI
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString

zhoneVoipMaliciousCallerEnable		1.3.6.1.4.1.5504.4.3.4.5.2.1.3
Indicates whether the incoming call reject is enabled
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

zhoneVoipMaliciousCallerRowStatus		1.3.6.1.4.1.5504.4.3.4.5.2.1.4
The row status is used to create or delete an entry in this table.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneVoipServerCfg		1.3.6.1.4.1.5504.4.3.4.6
OBJECT IDENTIFIER

zhoneVoipServerTable		1.3.6.1.4.1.5504.4.3.4.6.1
Table of VOIP Server addresses applicable to each VOIP user agent within the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneVoipServerEntry

zhoneVoipServerEntry		1.3.6.1.4.1.5504.4.3.4.6.1.1
An entry within the table. Indexed by applIndex, which is the slot number, and a user specified unique number.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneVoipServerEntry

zhoneVoipServerAddressIndex		1.3.6.1.4.1.5504.4.3.4.6.1.1.1
A unique identifier of a server address when multiple addresses are configured by the MGCP entity. If one address isn't reachable, then another can be tried.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

zhoneVoipServerRowStatus		1.3.6.1.4.1.5504.4.3.4.6.1.1.2
Row Status is used to create, modify or delete an entry.
Status: current	Access: read-create
OBJECT-TYPE
	ZhoneRowStatus

zhoneVoipServerAddrType		1.3.6.1.4.1.5504.4.3.4.6.1.1.3
This object specifies the type of address contained in the associated instance of sipVoipServerAddr.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

zhoneVoipServerAddr		1.3.6.1.4.1.5504.4.3.4.6.1.1.4
This object specifies the address of a VOIP server this user agent will use to proxy/redirect calls.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zhoneVoipServerUdpPortNumber		1.3.6.1.4.1.5504.4.3.4.6.1.1.5
Specifies the UDP Port number for the MGCP Gateway. 2427 is the IANA Registered MGCP Gateway port.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..65535

zhoneVoipServerId		1.3.6.1.4.1.5504.4.3.4.6.1.1.6
Identifies the voip server type.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	longboard(1), asterisk(2), sipexpressrouter(3), metaswitch(4), sylantro(5), broadsoft(6), ubiquity(7), generalbandwidth(8), tekelec-T6000(9), generic(10), sonus(11), siemens(12), tekelec-T9000(13), lucent-telica(14), nortel-cs2000(15), nuera(16), lucent-imerge(17), coppercom(18), newcross(19), cisco-bts(20), cirpack-utp(21), italtel-issw(22), cisco-pgw(23), microtrol-msk10(24), nortel-dms10(25), verso-clarent-c5cm(26), cedarpoint-safari(27), huawei-softx3000(28), nortel-cs1500(29), taqua-t7000(30), utstarcom-mswitch(31), broadsoft-broadworks(32), broadsoft-m6(33), genband-g9(34), netcentrex(35), genband-g6(36), alu-5060(37), ericsson-apz60(38)

zhoneVoipServerProtocol		1.3.6.1.4.1.5504.4.3.4.6.1.1.7
The signalling protocol used for VOIP. Choicees are SIP (Session Initiation Protocol) and MGCP (Media Gateway Control Protocol).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	sip(1), mgcp(2), megaco(3), ncs(4)

zhoneVoipServerSendCallProceedingTone		1.3.6.1.4.1.5504.4.3.4.6.1.1.8
ndicates whether, on call originations destined to the PSTN, the device should play a call proceeding tone while waiting for ring-back tone from the switch.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

zhoneVoipServerRtcpEnabled		1.3.6.1.4.1.5504.4.3.4.6.1.1.9
Indicates whether the Real-Time Control Protocol is enabled for the device.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

zhoneVoipServerRtcpPacketInterval		1.3.6.1.4.1.5504.4.3.4.6.1.1.10
RTCP packet interval, in milleseconds. Range is 2500 to 10000 ms. This object's value is only pertinent if RTCP has been enabled.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zhoneVoipServerInterDigitTimeout		1.3.6.1.4.1.5504.4.3.4.6.1.1.11
This parameter indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zhoneVoipServerIpTos		1.3.6.1.4.1.5504.4.3.4.6.1.1.12
This parameter indicates the tos value that is set in the ip header for voice of ip traffic.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zhoneVoipServerDomainName		1.3.6.1.4.1.5504.4.3.4.6.1.1.13
This parameter indicates the Universal Resource Identifier (URI) of the system.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString

zhoneVoipServerExpiresInvite		1.3.6.1.4.1.5504.4.3.4.6.1.1.14
For user agent clients, this value is inserted into the Expires header. For proxy servers, if a received request contained an Expires header, then the value in the header takes precedence.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

zhoneVoipServerExpiresRegister		1.3.6.1.4.1.5504.4.3.4.6.1.1.15
For user agent clients, this value is inserted into the Expires header. For registrar servers, if a received request contained an Expires header, then the value in the header takes precedence.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

zhoneVoipServerHeaderMethod		1.3.6.1.4.1.5504.4.3.4.6.1.1.16
This convention is a bit map. Each bit represents a SIP method where the Expires header should be included. If a bit has value 1, then the requests corresponding to that SIP method must include an Expires header line. If a bit has value 0, then the Expires header line will not be added. Combinations of bits can be set when the Expires header line is required in multiple SIP methods. bit 0 : INVITE method. bit 1 : REGISTER Method.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	invite(0), register(1)

zhoneVoipServerSessionTimer		1.3.6.1.4.1.5504.4.3.4.6.1.1.17
Support session timers on : Session timers are supported, and SIP messages will have a 'Supported: timer' header off: Session timers are NOT supported, and SIP messages will NOT have a 'Supported: timer' header
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	on(1), off(2)

zhoneVoipServerSessionExpiration		1.3.6.1.4.1.5504.4.3.4.6.1.1.18
The time at which an element (proxy, UAC, UAS) will consider the SIP session timed out, if no successful session refresh transaction occurs beforehand.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	90..2147483647

zhoneVoipServerSessionMinSE		1.3.6.1.4.1.5504.4.3.4.6.1.1.19
Because of the processing load of mid-dialog requests, all elements (proxy, UAC, UAS) can have configured minimum value for the session interval that they are willing to accept.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	90..2147483647

zhoneVoipServerSessionCallerReqTimer		1.3.6.1.4.1.5504.4.3.4.6.1.1.20
This field specifies the caller's action yes: Caller (UAC) will request for timer when making outbound calls no : Caller (UAC) will NOT request for timer when making outbound calls
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2)

zhoneVoipServerSessionCalleeReqTimer		1.3.6.1.4.1.5504.4.3.4.6.1.1.21
When caller supports timer but did not request one this field specifies the callee's action yes: Callee (UAS) will request for timer no : Callee (UAS) will NOT request for timer
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	yes(1), no(2)

zhoneVoipServerSessionCallerSpecifyRefresher		1.3.6.1.4.1.5504.4.3.4.6.1.1.22
Caller specifies the refresher: UAC : Caller specifies itself (UAC) as the refresher UAS : Caller specifies the callee (UAS) as the refresher Omit: Caller does NOT explicitly specify the refresher
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	uac(1), uas(2), omit(3)

zhoneVoipServerSessionCalleeSpecifyRefresher		1.3.6.1.4.1.5504.4.3.4.6.1.1.23
When UAC did not specify refresher tag, callee specifies the refresher: UAC : Callee specifies the caller (UAC) as the refresher UAS : Callee specifies itself (UAS) as the refresher
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	uac(1), uas(2)

zhoneVoipServerDtmfMode		1.3.6.1.4.1.5504.4.3.4.6.1.1.24
Indicates whether dtmf digits are to be passed as codec voice packets or special separate packets (rfc2833).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	inband(1), rfc2833(2), rfc2833only(3)

zhoneVoipServerBehaviorStringOne		1.3.6.1.4.1.5504.4.3.4.6.1.1.25
This field is used to control any switch specific behavior of the VOIP Gateway.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..512)

zhoneVoipServerRtpTermIdSyntax		1.3.6.1.4.1.5504.4.3.4.6.1.1.26
This field describes the Ephemeral term ID syntax for the switch. The RTP syntax varies from switch to switch.But the string should contain atleast one %eid format, eg %eid . This field is supported only for the Megaco protocol for all other protocols this field will be initialized to NULL. If the protocol is megaco and the field is NULL, Ephemeral term id will be updated to default syntax of the server Id given. If the server Id is not provisioned with the default id then field will be updated to NULL.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..96)

zhoneVoipServerRtpDSCP		1.3.6.1.4.1.5504.4.3.4.6.1.1.27
This parameter indicates DSCP value for voip's rtp traffic. NOTE:zhoneVoipServerIpTos field must be zero before entering a new value into this field. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..8)

zhoneVoipServerSignalingDSCP		1.3.6.1.4.1.5504.4.3.4.6.1.1.28
This parameter indicates DSCP value for voip's signaling traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..8)

zhoneVoipServerDtmfPayloadId		1.3.6.1.4.1.5504.4.3.4.6.1.1.29
Description.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	96..127

zhoneVoipServerRegisterReadyTimeout		1.3.6.1.4.1.5504.4.3.4.6.1.1.30
For Megaco Service change Messages this value will be used in service-change-delay.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

zhoneVoipServerMessageRetryCount		1.3.6.1.4.1.5504.4.3.4.6.1.1.31
This field specifies the number of retries of SIP message to every DNS resolved server IP addresses. The default behaviour means that the SIP message will be retransmitted to the first DNS resolved IP address once and the remaining retransmissions will be to the second DNS resolved IP address. The default value of zero or DNS resolved to a single IP address means that the default behaviour will take effect
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..10

zhoneVoipServerFeatures		1.3.6.1.4.1.5504.4.3.4.6.1.1.32
Set of features can be enabled for voip server Bit Feature --- -------- 1 sip outbound 2 gruu
Status: current	Access: read-create
OBJECT-TYPE
	BITS	sip-outbound(0), gruu(1)

zhoneVoipServerTransportProtocol		1.3.6.1.4.1.5504.4.3.4.6.1.1.33
This field specifies type of transport protocol configured. Possible values are udp and tcp.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	udp(1), tcp(2)

zhoneVoipSigLocalPortNumber		1.3.6.1.4.1.5504.4.3.4.6.1.1.34
This field specifies signalling local port number, used when tcp is configured as tranport protocol.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..65535