ZHONE-DISMAN-TRACEROUTE-MIB

File: ZHONE-DISMAN-TRACEROUTE-MIB.mib (36669 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
SNMP-FRAMEWORK-MIB	IF-MIB	INET-ADDRESS-MIB
ZHONE-DISMAN-PING-MIB	Zhone

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Gauge32	Unsigned32	mib-2
NOTIFICATION-TYPE	OBJECT-IDENTITY	RowStatus
StorageType	TruthValue	DateAndTime
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
SnmpAdminString	InterfaceIndexOrZero	InetAddressType
InetAddress	OperationResponseStatus	zhoneIp

Defined Types

ZhoneTraceRouteCtlEntry
SEQUENCE
	zhoneTraceRouteCtlIndex	INTEGER
	zhoneTraceRouteCtlTargetAddressType	InetAddressType
	zhoneTraceRouteCtlTargetAddress	InetAddress
	zhoneTraceRouteCtlByPassRouteTable	TruthValue
	zhoneTraceRouteCtlDataSize	Unsigned32
	zhoneTraceRouteCtlTimeOut	Unsigned32
	zhoneTraceRouteCtlProbesPerHop	Unsigned32
	zhoneTraceRouteCtlPort	Unsigned32
	zhoneTraceRouteCtlMaxTtl	Unsigned32
	zhoneTraceRouteCtlDSField	Unsigned32
	zhoneTraceRouteCtlSourceAddressType	InetAddressType
	zhoneTraceRouteCtlSourceAddress	InetAddress
	zhoneTraceRouteCtlIfIndex	InterfaceIndexOrZero
	zhoneTraceRouteCtlMiscOptions	SnmpAdminString
	zhoneTraceRouteCtlMaxFailures	Unsigned32
	zhoneTraceRouteCtlDontFragment	TruthValue
	zhoneTraceRouteCtlInitialTtl	Unsigned32
	zhoneTraceRouteCtlFrequency	Unsigned32
	zhoneTraceRouteCtlStorageType	StorageType
	zhoneTraceRouteCtlAdminStatus	INTEGER
	zhoneTraceRouteCtlMaxRows	Unsigned32
	zhoneTraceRouteCtlTrapGeneration	BITS
	zhoneTraceRouteCtlDescr	SnmpAdminString
	zhoneTraceRouteCtlCreateHopsEntries	TruthValue
	zhoneTraceRouteCtlType	OBJECT IDENTIFIER
	zhoneTraceRouteCtlRowStatus	RowStatus

ZhoneTraceRouteResultsEntry
SEQUENCE
	zhoneTraceRouteResultsOperStatus	INTEGER
	zhoneTraceRouteResultsCurHopCount	Gauge32
	zhoneTraceRouteResultsCurProbeCount	Gauge32
	zhoneTraceRouteResultsIpTgtAddrType	InetAddressType
	zhoneTraceRouteResultsIpTgtAddr	InetAddress
	zhoneTraceRouteResultsTestAttempts	Unsigned32
	zhoneTraceRouteResultsTestSuccesses	Unsigned32
	zhoneTraceRouteResultsLastGoodPath	DateAndTime

ZhoneTraceRouteHopsEntry
SEQUENCE
	zhoneTraceRouteHopsHopIndex	Unsigned32
	zhoneTraceRouteHopsIpTgtAddressType	InetAddressType
	zhoneTraceRouteHopsIpTgtAddress	InetAddress
	zhoneTraceRouteHopsMinRtt	Unsigned32
	zhoneTraceRouteHopsMaxRtt	Unsigned32
	zhoneTraceRouteHopsAverageRtt	Unsigned32
	zhoneTraceRouteHopsRttSumOfSquares	Unsigned32
	zhoneTraceRouteHopsSentProbes	Unsigned32
	zhoneTraceRouteHopsProbeResponses	Unsigned32
	zhoneTraceRouteHopsLastGoodProbe	DateAndTime

Defined Values

zhoneTraceRouteMIB		1.3.6.1.4.1.5504.4.1.20
The Traceroute MIB (ZHONE-DISMAN-TRACEROUTE-MIB) provides access to the traceroute capability at a remote host.
MODULE-IDENTITY

zhoneTraceRouteNotifications		1.3.6.1.4.1.5504.4.1.20.0
OBJECT IDENTIFIER

zhoneTraceRouteObjects		1.3.6.1.4.1.5504.4.1.20.1
OBJECT IDENTIFIER

zhoneTraceRouteConformance		1.3.6.1.4.1.5504.4.1.20.2
OBJECT IDENTIFIER

zhoneTraceRouteImplementationTypeDomains		1.3.6.1.4.1.5504.4.1.20.3
OBJECT IDENTIFIER

zhoneTraceRouteUsingUdpProbes		1.3.6.1.4.1.5504.4.1.20.3.1
Indicates that an implementation is using UDP probes to perform the traceroute operation.
Status: current	Access: read-only
OBJECT-IDENTITY

zhoneTraceRouteMaxConcurrentRequests		1.3.6.1.4.1.5504.4.1.20.1.1
The maximum number of concurrent active traceroute requests that are allowed within an agent implementation. A value of 0 for this object implies that there is no limit for the number of concurrent active requests in effect.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteCtlIndexNext		1.3.6.1.4.1.5504.4.1.20.1.2
This object contains an appropriate value to be used for zhonePingCtlIndex when creating entries in the zhonePingCtlTable. The value 0 indicates that no unassigned entries are available. To obtain the zhonePingCtlIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..2147483647

zhoneTraceRouteCtlTable		1.3.6.1.4.1.5504.4.1.20.1.3
Defines the Remote Operations Traceroute Control Table for providing the capability of invoking traceroute from a remote host. The results of traceroute operations can be stored in the zhoneTraceRouteResultsTable, and the zhoneTraceRouteHopsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneTraceRouteCtlEntry

zhoneTraceRouteCtlEntry		1.3.6.1.4.1.5504.4.1.20.1.3.1
Defines an entry in the zhoneTraceRouteCtlTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneTraceRouteCtlEntry

zhoneTraceRouteCtlIndex		1.3.6.1.4.1.5504.4.1.20.1.3.1.1
When used in conjunction with such a security policy all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a given user's entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the 'column' subidentifier) up to the end of the encoded owner index.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..2147483647

zhoneTraceRouteCtlTargetAddressType		1.3.6.1.4.1.5504.4.1.20.1.3.1.2
Specifies the type of host address to be used on the traceroute request at the remote host.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

zhoneTraceRouteCtlTargetAddress		1.3.6.1.4.1.5504.4.1.20.1.3.1.3
Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by the examining the value of the corresponding zhoneTraceRouteCtlTargetAddressType index element. A value for this object MUST be set prior to transitioning its corresponding zhoneTraceRouteCtlEntry to active(1) via zhoneTraceRouteCtlRowStatus.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zhoneTraceRouteCtlByPassRouteTable		1.3.6.1.4.1.5504.4.1.20.1.3.1.4
The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to perform the traceroute operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by routed).
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

zhoneTraceRouteCtlDataSize		1.3.6.1.4.1.5504.4.1.20.1.3.1.5
Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by encoding a UDP datagram into a IP packet. So subtracting the size of a UDP header (8 octets) and the size of a IP header (20 octets) yields a maximum of 65507 octets.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65507

zhoneTraceRouteCtlTimeOut		1.3.6.1.4.1.5504.4.1.20.1.3.1.6
Specifies the time-out value, in seconds, for a traceroute request.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..60

zhoneTraceRouteCtlProbesPerHop		1.3.6.1.4.1.5504.4.1.20.1.3.1.7
Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..10

zhoneTraceRouteCtlPort		1.3.6.1.4.1.5504.4.1.20.1.3.1.8
Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) host. The default value for this object is the IANA assigned port, 33434, for the traceroute function.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..65535

zhoneTraceRouteCtlMaxTtl		1.3.6.1.4.1.5504.4.1.20.1.3.1.9
Specifies the maximum time-to-live value.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..255

zhoneTraceRouteCtlDSField		1.3.6.1.4.1.5504.4.1.20.1.3.1.10
Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe. The DS Field is defined as the Type of Service (TOS) octet in a IPv4 header or as the Traffic Class octet in a IPv6 header. The value of this object must be a decimal integer in the range from 0 to 255. This option can be used to determine what effect an explicit DS Field setting has on a traceroute response. Not all values are legal or meaningful. DS Field usage is often not supported by IP implementations. A value of 0 means that the function represented by this option is not supported. Useful TOS octet values are probably '16' (low delay) and '8' ( high throughput).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneTraceRouteCtlSourceAddressType		1.3.6.1.4.1.5504.4.1.20.1.3.1.11
Specifies the type of the source address, zhoneTraceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute operation.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

zhoneTraceRouteCtlSourceAddress		1.3.6.1.4.1.5504.4.1.20.1.3.1.12
Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this option can be used to force the source address to be something other than the primary IP address of the interface the probe packet is sent on. If the IP address is not one of this machine's interface addresses, an error is returned and nothing is sent. A zero length octet string value for this object disables source address specification. The address type (InetAddressType) that relates to this object is specified by the corresponding value of zhoneTraceRouteCtlSourceAddressType.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zhoneTraceRouteCtlIfIndex		1.3.6.1.4.1.5504.4.1.20.1.3.1.13
Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specified interface. A value of zero for this object implies that this option is not enabled.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

zhoneTraceRouteCtlMiscOptions		1.3.6.1.4.1.5504.4.1.20.1.3.1.14
Enables an application to specify implementation dependent options.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString

zhoneTraceRouteCtlMaxFailures		1.3.6.1.4.1.5504.4.1.20.1.3.1.15
The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of either 255 (maximum hop count/possible TTL value) or a 0 indicates that the function of terminating a remote traceroute request when a specific number of successive timeouts are detected is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneTraceRouteCtlDontFragment		1.3.6.1.4.1.5504.4.1.20.1.3.1.16
This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing a manual PATH MTU test.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

zhoneTraceRouteCtlInitialTtl		1.3.6.1.4.1.5504.4.1.20.1.3.1.17
The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

zhoneTraceRouteCtlFrequency		1.3.6.1.4.1.5504.4.1.20.1.3.1.18
The number of seconds to wait before repeating a traceroute test as defined by the value of the various objects in the corresponding row. The number of hops in a single traceroute test is determined by the value of the corresponding zhoneTraceRouteCtlProbesPerHop object. After a single test completes the number of seconds as defined by the value of zhoneTraceRouteCtlFrequency MUST elapse before the next traceroute test is started. A value of 0 for this object implies that the test as defined by the corresponding entry will not be repeated.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteCtlStorageType		1.3.6.1.4.1.5504.4.1.20.1.3.1.19
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

zhoneTraceRouteCtlAdminStatus		1.3.6.1.4.1.5504.4.1.20.1.3.1.20
Reflects the desired state that an zhoneTraceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this zhoneTraceRouteCtlEntry. disabled(2) - Deactivate the test as defined by this zhoneTraceRouteCtlEntry. Refer to the corresponding zhoneTraceRouteResultsOperStatus to determine the operational state of the test defined by this entry.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

zhoneTraceRouteCtlDescr		1.3.6.1.4.1.5504.4.1.20.1.3.1.21
The purpose of this object is to provide a descriptive name of the remote traceroute test.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString

zhoneTraceRouteCtlMaxRows		1.3.6.1.4.1.5504.4.1.20.1.3.1.22
None
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteCtlTrapGeneration		1.3.6.1.4.1.5504.4.1.20.1.3.1.23
The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a zhoneTraceRoutePathChange notification when the current path varies from a previously determined path. testFailure(1) - Generate a zhoneTraceRouteTestFailed notification when the full path to a target can't be determined. testCompletion(2) - Generate a zhoneTraceRouteTestCompleted notification when the path to a target has been determined. The value of this object defaults to zero, indicating that none of the above options have been selected.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	pathChange(0), testFailure(1), testCompletion(2)

zhoneTraceRouteCtlCreateHopsEntries		1.3.6.1.4.1.5504.4.1.20.1.3.1.24
The current path for a traceroute test is kept in the zhoneTraceRouteHopsTable on a per hop basis when the value of this object is true(1).
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

zhoneTraceRouteCtlType		1.3.6.1.4.1.5504.4.1.20.1.3.1.25
The value of this object is used either to report or select the implementation method to be used for performing a traceroute operation. The value of this object may be selected from zhoneTraceRouteImplementationTypeDomains. Additional implementation types should be allocated as required by implementers of the ZHONE-DISMAN-TRACEROUTE-MIB under their enterprise specific registration point and not beneath zhoneTraceRouteImplementationTypeDomains.
Status: current	Access: read-create
OBJECT-TYPE
	OBJECT IDENTIFIER

zhoneTraceRouteCtlRowStatus		1.3.6.1.4.1.5504.4.1.20.1.3.1.26
This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in all corresponding (same zhoneTraceRouteCtlOwnerIndex and zhoneTraceRouteCtlTestName index values) zhoneTraceRouteResultsTable and zhoneTraceRouteHopsTable entries being deleted. A value MUST be specified for zhoneTraceRouteCtlTargetAddress prior to a transition to active(1) state being accepted. Activation of a remote traceroute operation is controlled via zhoneTraceRouteCtlAdminStatus and not by transitioning of this object's value to active(1). Transitions in and out of active(1) state are not allowed while an entry's zhoneTraceRouteResultsOperStatus is active(1) with the exception that deletion of an entry in this table by setting its RowStatus object to destroy(6) will stop an active traceroute operation. The operational state of an traceroute operation can be determined by examination of the corresponding zhoneTraceRouteResultsOperStatus object.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zhoneTraceRouteResultsTable		1.3.6.1.4.1.5504.4.1.20.1.4
Defines the Remote Operations Traceroute Results Table for keeping track of the status of a zhoneTraceRouteCtlEntry. An entry is added to the zhoneTraceRouteResultsTable when an zhoneTraceRouteCtlEntry is started by successful transition of its zhoneTraceRouteCtlAdminStatus object to enabled(1). An entry is removed from the zhoneTraceRouteResultsTable when its corresponding zhoneTraceRouteCtlEntry is deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneTraceRouteResultsEntry

zhoneTraceRouteResultsEntry		1.3.6.1.4.1.5504.4.1.20.1.4.1
Defines an entry in the zhoneTraceRouteResultsTable. The zhoneTraceRouteResultsTable has the same indexing as the zhoneTraceRouteCtlTable in order for a zhoneTraceRouteResultsEntry to correspond to the zhoneTraceRouteCtlEntry that caused it to be created.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneTraceRouteResultsEntry

zhoneTraceRouteResultsOperStatus		1.3.6.1.4.1.5504.4.1.20.1.4.1.1
Reflects the operational state of an zhoneTraceRouteCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

zhoneTraceRouteResultsCurHopCount		1.3.6.1.4.1.5504.4.1.20.1.4.1.2
Reflects the current TTL value (range from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by zhoneTraceRouteCtlMaxTtl.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

zhoneTraceRouteResultsCurProbeCount		1.3.6.1.4.1.5504.4.1.20.1.4.1.3
Reflects the current probe count (1..10) for a remote traceroute operation. The maximum probe count is determined by zhoneTraceRouteCtlProbesPerHop.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

zhoneTraceRouteResultsIpTgtAddrType		1.3.6.1.4.1.5504.4.1.20.1.4.1.4
This objects indicates the type of address stored in the corresponding zhoneTraceRouteResultsIpTgtAddr object.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

zhoneTraceRouteResultsIpTgtAddr		1.3.6.1.4.1.5504.4.1.20.1.4.1.5
This objects reports the IP address associated with a zhoneTraceRouteCtlTargetAddress value when the destination address is specified as a DNS name. The value of this object should be a zero length octet string when a DNS name is not specified or when a specified DNS name fails to resolve.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

zhoneTraceRouteResultsTestAttempts		1.3.6.1.4.1.5504.4.1.20.1.4.1.6
The current number of attempts to determine a path to a target. The value of this object MUST be started at 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteResultsTestSuccesses		1.3.6.1.4.1.5504.4.1.20.1.4.1.7
The current number of attempts to determine a path to a target that have succeeded. The value of this object MUST be reported as 0 when no attempts have succeeded.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteResultsLastGoodPath		1.3.6.1.4.1.5504.4.1.20.1.4.1.8
The date and time when the last complete path was determined.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

zhoneTraceRouteHopsTable		1.3.6.1.4.1.5504.4.1.20.1.5
Defines the Remote Operations Traceroute Hop Table for keeping track of the results of traceroute tests on a per hop basis.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZhoneTraceRouteHopsEntry

zhoneTraceRouteHopsEntry		1.3.6.1.4.1.5504.4.1.20.1.5.1
Defines an entry in the zhoneTraceRouteHopsTable. The first two index elements identify the zhoneTraceRouteCtlEntry that a zhoneTraceRouteHopsEntry belongs to. The third index element, zhoneTraceRouteHopsHopIndex, selects a hop in a traceroute path.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZhoneTraceRouteHopsEntry

zhoneTraceRouteHopsHopIndex		1.3.6.1.4.1.5504.4.1.20.1.5.1.1
Specifies the hop index for a traceroute hop. Values for this object with respect to the same zhoneTraceRouteCtlOwnerIndex and zhoneTraceRouteCtlTestName MUST start at 1 and increase monotonically. The zhoneTraceRouteHopsTable keeps the current traceroute path per zhoneTraceRouteCtlEntry if enabled by setting the corresponding zhoneTraceRouteCtlCreateHopsEntries to true(1). All hops (zhoneTraceRouteHopsTable entries) in a traceroute path MUST be updated at the same time when a traceroute operation completes. Care needs to be applied when either a path changes or can't be determined. The initial portion of the path, up to the first hop change, MUST retain the same zhoneTraceRouteHopsHopIndex values. The remaining portion of the path SHOULD be assigned new zhoneTraceRouteHopsHopIndex values.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteHopsIpTgtAddressType		1.3.6.1.4.1.5504.4.1.20.1.5.1.2
This objects indicates the type of address stored in the corresponding zhoneTraceRouteHopsIpTargetAddress object.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

zhoneTraceRouteHopsIpTgtAddress		1.3.6.1.4.1.5504.4.1.20.1.5.1.3
This object reports the IP address associated with the hop. A value for this object should be reported as a numeric IP address and not as a DNS name.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

zhoneTraceRouteHopsMinRtt		1.3.6.1.4.1.5504.4.1.20.1.5.1.4
The minimum traceroute round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteHopsMaxRtt		1.3.6.1.4.1.5504.4.1.20.1.5.1.5
The maximum traceroute round-trip-time (RTT) received for this hop. A value of 0 for this object implies that no RTT has been received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteHopsAverageRtt		1.3.6.1.4.1.5504.4.1.20.1.5.1.6
The current average traceroute round-trip-time (RTT) for this hop.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteHopsRttSumOfSquares		1.3.6.1.4.1.5504.4.1.20.1.5.1.7
This object contains the sum of all traceroute responses received for this hop. Its purpose is to enable standard deviation calculation.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteHopsSentProbes		1.3.6.1.4.1.5504.4.1.20.1.5.1.8
The value of this object reflects the number of probes sent for this hop during this traceroute test. The value of this object should start at 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteHopsProbeResponses		1.3.6.1.4.1.5504.4.1.20.1.5.1.9
Number of responses received for this hop during this traceroute test. This value of this object should start at 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

zhoneTraceRouteHopsLastGoodProbe		1.3.6.1.4.1.5504.4.1.20.1.5.1.10
Date and time was the last response was received for a probe for this hop during this traceroute test.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

zhoneTraceRoutePathChange		1.3.6.1.4.1.5504.4.1.20.0.1
The path to a target has changed.
Status: current	Access: read-only
NOTIFICATION-TYPE

zhoneTraceRouteTestFailed		1.3.6.1.4.1.5504.4.1.20.0.2
Could not determine the path to a target.
Status: current	Access: read-only
NOTIFICATION-TYPE

zhoneTraceRouteTestCompleted		1.3.6.1.4.1.5504.4.1.20.0.3
The path to a target has just been determined.
Status: current	Access: read-only
NOTIFICATION-TYPE

zhoneTraceRouteGroups		1.3.6.1.4.1.5504.4.1.20.2.1
OBJECT IDENTIFIER

zhoneTraceRouteGroup		1.3.6.1.4.1.5504.4.1.20.2.1.1
The group of objects that comprise the remote traceroute operation.
Status: current	Access: read-only
OBJECT-GROUP

zhoneTraceRouteTimeStampGroup		1.3.6.1.4.1.5504.4.1.20.2.1.2
The group of DateAndTime objects.
Status: current	Access: read-only
OBJECT-GROUP

zhoneTraceRouteNotificationsGroup		1.3.6.1.4.1.5504.4.1.20.2.1.3
The notifications which are required to be supported by implementations of this MIB.
Status: current	Access: read-only
NOTIFICATION-GROUP

zhoneTraceRouteHopsTableGroup		1.3.6.1.4.1.5504.4.1.20.2.1.4
The group of objects that comprise the zhoneTraceRouteHopsTable.
Status: current	Access: read-only
OBJECT-GROUP