ZTE-AN-DHCP-L2-RELAY-AGENT-MIB

File: ZTE-AN-DHCP-L2-RELAY-AGENT-MIB.mib (12664 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB ZTE-AN-SMI ZTE-AN-IF-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Integer32
OBJECT-GROUP NOTIFICATION-GROUP MODULE-COMPLIANCE
RowStatus TruthValue ifIndex
zxAnServiceSecurity zxAnSubIfIndex

Defined Types

ZxAnDhcpV4L2RAVlanEntry  
SEQUENCE    
  zxAnDhcpV4L2RAVid Integer32
  zxAnDhcpV4L2RAVlanRowStatus RowStatus

ZxAnDhcpV6L2RAVlanEntry  
SEQUENCE    
  zxAnDhcpV6L2RAVid Integer32
  zxAnDhcpV6L2RAVlanRowStatus RowStatus

ZxAnDhcpV6L2RAIfConfEntry  
SEQUENCE    
  zxAnDhcpV6L2RAIfConfEnable INTEGER
  zxAnDhcpV6L2RAIfConfTrust TruthValue
  zxAnDhcpV6L2RAIfConfPolicy INTEGER
  zxAnDhcpV6L2RAIfWorkMode INTEGER

Defined Values

zxAnDhcpL2RAMib 1.3.6.1.4.1.3902.1082.70.60
This MIB defines the managed objects of DHCP Layer-2 Relay Agent.
MODULE-IDENTITY    

zxAnDhcpL2RAObjects 1.3.6.1.4.1.3902.1082.70.60.2
OBJECT IDENTIFIER    

zxAnDhcpV4L2RAObjects 1.3.6.1.4.1.3902.1082.70.60.2.1
OBJECT IDENTIFIER    

zxAnDhcpV6L2RAObjects 1.3.6.1.4.1.3902.1082.70.60.2.2
OBJECT IDENTIFIER    

zxAnDhcpV4L2RAVlanTable 1.3.6.1.4.1.3902.1082.70.60.2.1.2
DhcpV4 layer-2 relay agent vlan switch table. When dhcpV4 layer-2 relay agent on the vlan is activated, the dhcpV4 packets with this vlan will be processed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnDhcpV4L2RAVlanEntry

zxAnDhcpV4L2RAVlanEntry 1.3.6.1.4.1.3902.1082.70.60.2.1.2.1
The entry of DhcpV4 layer-2 relay agent vlan switch table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnDhcpV4L2RAVlanEntry  

zxAnDhcpV4L2RAVid 1.3.6.1.4.1.3902.1082.70.60.2.1.2.1.1
The vlan on which the dhcpV4 layer-2 relay agent is activated. 256 vlans at most can be created.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnDhcpV4L2RAVlanRowStatus 1.3.6.1.4.1.3902.1082.70.60.2.1.2.1.50
The status of this conceptual row. The state of this conceptual row only supports 'not exist' and 'active'. The action of this conceptual row only supports 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnDhcpV6L2RAGlobalObjects 1.3.6.1.4.1.3902.1082.70.60.2.2.1
OBJECT IDENTIFIER    

zxAnDhcpV6L2RAWorkMode 1.3.6.1.4.1.3902.1082.70.60.2.2.1.2
DHCPv6 layer 2 relay agent work mode. LDRA means the protocol RFC6221(Lightweight DHCPv6 Relay Agent). noLdra: The format of the relay messages do not meet RFC6221 standards. ldra: The format of the relay messages meet RFC6221 standards.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noLdra(1), ldra(2)  

zxAnDhcpV6L2RAVlanTable 1.3.6.1.4.1.3902.1082.70.60.2.2.2
DhcpV6 layer-2 relay agent vlan switch table. When dhcpV6 layer-2 relay agent on the vlan is activated, the dhcpV6 packets with this vlan will be processed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnDhcpV6L2RAVlanEntry

zxAnDhcpV6L2RAVlanEntry 1.3.6.1.4.1.3902.1082.70.60.2.2.2.1
The entry of DhcpV6 layer-2 relay agent vlan switch table.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnDhcpV6L2RAVlanEntry  

zxAnDhcpV6L2RAVid 1.3.6.1.4.1.3902.1082.70.60.2.2.2.1.1
The vlan on which the dhcpV6 layer-2 relay agent is activated. 256 vlans at most can be created.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnDhcpV6L2RAVlanRowStatus 1.3.6.1.4.1.3902.1082.70.60.2.2.2.1.50
The status of this conceptual row. The state of this conceptual row only supports 'not exist' and 'active'. The action of this conceptual row only supports 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnDhcpV6L2RAIfConfTable 1.3.6.1.4.1.3902.1082.70.60.2.2.3
DhcpV6 layer-2 relay agent interface configuration table. C6XX not support anymore.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnDhcpV6L2RAIfConfEntry

zxAnDhcpV6L2RAIfConfEntry 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1
An entry in zxAnDhcpV6L2RAIfConfTable. When a manager wants to set the trust policy of the interface, it must comply with the multi-variables usage rule that all t- he mib variables related to the fuction must be in one snmp s- et operation, the variables are all mandatory. - mandatoty: zxAnDhcpV6L2RAIfConfTrust, zxAnDhcpV6L2RAIfConfPolicy.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnDhcpV6L2RAIfConfEntry  

zxAnDhcpV6L2RAIfConfEnable 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1.1
The interface switch used to activate or deactivate interface DHCPv6 layer-2 relay agent. There are two states: - enable: the interface DHCPv6 layer-2 relay agent is activated. - disable: the interface DHCPv6 layer-2 relay agent is deactivated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxAnDhcpV6L2RAIfConfTrust 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1.2
DHCPv6 layer-2 relay agent interface trust flag. To set this variable, a manager must comply with the multi-variables usage rules in ZxAnDhcpV6L2RAIfConfEntry description.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

zxAnDhcpV6L2RAIfConfPolicy 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1.3
DHCPv6 layer-2 relay agent interface trust policy. To set this variable, a manager must comply with the following rules: - when trust flag is true, policy can be set to keep or replace. - when trust flag is false, policy can be set to discard or add. In addition, a manager must comply with the multi-variables usage rules in ZxAnDhcpV6L2RAIfConfEntry description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER keep(1), replace(2), discard(3), add(4)  

zxAnDhcpV6L2RAIfWorkMode 1.3.6.1.4.1.3902.1082.70.60.2.2.3.1.4
DHCPv6 layer 2 relay agent work mode of the interface. LDRA means the protocol RFC6221(Lightweight DHCPv6 Relay Agent). noLdra: The format of the relay messages do not meet RFC6221 standards. ldra: The format of the relay messages meet RFC6221 standards. invalid: The format of the relay message is configured by zxAnDhcpV6L2RAWorkMode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noLdra(1), ldra(2), invalid(255)  

zxAnDhcpL2RAConformance 1.3.6.1.4.1.3902.1082.70.60.4
OBJECT IDENTIFIER    

zxAnDhcpL2RACompliances 1.3.6.1.4.1.3902.1082.70.60.4.1
OBJECT IDENTIFIER    

zxAnDhcpL2RAGroups 1.3.6.1.4.1.3902.1082.70.60.4.2
OBJECT IDENTIFIER