ZTE-AN-MAC-MIB
File:
ZTE-AN-MAC-MIB.mib (25543 bytes)
Imported modules
Imported symbols
Defined Types
ZxAnMacFwdEntry |
|
SEQUENCE |
|
|
|
|
zxAnMacFwdAddrStatus |
INTEGER |
|
|
zxAnMacFwdVid |
Integer32 |
|
|
zxAnMacFwdMacAddr |
MacAddress |
|
|
zxAnMacFwdConfRowStatus |
RowStatus |
|
ZxAnMacFwdVlanStatsEntry |
|
SEQUENCE |
|
|
|
|
zxAnMacFwdVlanStatsVid |
VlanId |
|
|
zxAnMacFwdVlanStatsMacs |
Counter32 |
|
ZxAnMacFwdVlanConfEntry |
|
SEQUENCE |
|
|
|
|
zxAnMacFwdVlanConfVid |
VlanId |
|
|
zxAnMacFwdVlanConfAgingTime |
Integer32 |
|
|
zxAnMacFwdVlanConfRowStatus |
RowStatus |
|
ZxAnMacFwdVlanMacEntry |
|
SEQUENCE |
|
|
|
|
zxAnMacFwdVlanMacAddr |
MacAddress |
|
Defined Values
zxAnMacMib |
1.3.6.1.4.1.3902.1082.40.10 |
This MIB defines MAC forwarding managed objects of zte
Access Node. |
MODULE-IDENTITY |
|
|
|
zxAnMacAgingTime |
1.3.6.1.4.1.3902.1082.40.10.2.1.1.1 |
The timeout period in seconds for aging out
dynamically learned forwarding information.
802.1D-1990 recommends a default of 300 seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
10..1000000 |
|
zxAnMacTableCapacity |
1.3.6.1.4.1.3902.1082.40.10.2.1.1.2 |
The capacity of the MAC forwarding table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
zxAnMacTableMonitorInterval |
1.3.6.1.4.1.3902.1082.40.10.2.1.1.3 |
The interval to monitor the max utilization of the MAC forwarding
table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
5..1440 |
|
zxAnMacTableCurrMaxUtilization |
1.3.6.1.4.1.3902.1082.40.10.2.1.1.6 |
The max utilization of the MAC forwarding table in current
monitoring period. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
zxAnMacTableHisMaxUtilization |
1.3.6.1.4.1.3902.1082.40.10.2.1.1.7 |
The max utilization of the MAC forwarding table from system
startup. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
zxAnMacTableUtilizationThreshold |
1.3.6.1.4.1.3902.1082.40.10.2.1.1.8 |
The utilization threshold of the MAC forwarding table. The
zxAnMacTableUtilOverThresh trap should be generated when it
is exceeded. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..100 |
|
zxAnMacTableCurrTotalMacAddress |
1.3.6.1.4.1.3902.1082.40.10.2.1.1.9 |
The current total MAC address number of the MAC forwarding table.
The value will be updated in each 5 seconds. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
zxAnMacTableUtilOverReportMode |
1.3.6.1.4.1.3902.1082.40.10.2.1.1.10 |
A trap reporting mode when the current utilization exceeds the
threshold.
- alarm(1):
An alarm trap should be generated when the utilization exceeds
the threshold.
- notification(2):
A notification trap should be generated when the utilization
exceeds the threshold.
Only supports C6XX, not supports C3XX. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
alarm(1), notification(2) |
|
zxAnMacTableUtilAlmClrThresh |
1.3.6.1.4.1.3902.1082.40.10.2.1.1.11 |
The utilization alarm cleared threshold.
Only supports C6XX, not supports C3XX. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..100 |
|
zxAnMacFwdTable |
1.3.6.1.4.1.3902.1082.40.10.2.1.2 |
This table contains information about unicast entries for which
the bridge has forwarding and/or filtering information. This
information is used by the transparent bridging function in
determining how to propagate a received frame. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ZxAnMacFwdEntry |
|
zxAnMacFwdEntry |
1.3.6.1.4.1.3902.1082.40.10.2.1.2.1 |
Information about a specific unicast MAC address for which the
bridge has some forwarding and/or filtering information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZxAnMacFwdEntry |
|
|
zxAnMacFwdAddrStatus |
1.3.6.1.4.1.3902.1082.40.10.2.1.2.1.1 |
A MAC address status to forward and/or filter.
The following is the explanation of each value of variable
zxAnMacFwdAddrStatus.
- dynamic(1):
The type of MAC forwarding table is dynamic.The dynamic
mac table will generate when a port receive frames and
can be aging out.
- permanent(2):
The type of MAC forwarding table is permanent.It can
be configured or delete by manually. The permenent MAC address
should be saved.
- static(3):
The type of MAC forwarding table is static. It can be configured
or deleted by other protocols automatically. The MAC address
could not be saved. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dynamic(1), permanent(2), static(3) |
|
zxAnMacFwdVid |
1.3.6.1.4.1.3902.1082.40.10.2.1.2.1.2 |
The vlan id of mac forwarding entry.This value may be 0 as
some user-cards don't support to learn vlanId of the MAC table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..4095 |
|
zxAnMacFwdMacAddr |
1.3.6.1.4.1.3902.1082.40.10.2.1.2.1.3 |
An unicast MAC address for which the bridge has forwarding
and/or filtering information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
zxAnMacFwdConfRowStatus |
1.3.6.1.4.1.3902.1082.40.10.2.1.2.1.50 |
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.
The dynamic MAC table is read-only,don't support to create or
delete.
The permanent MAC table support to create or delete.
To create a permanent MAC table, a manager must set this object
as createAndGo(4).
To delete a permanent MAC table, a manager must set this object
as destroy(6).
To query this object when a MAC table is existed, it always
returns active(1).
To query this object when a MAC table isn't existed, it always
returns no such instance. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
zxAnMacFwdVlanStatsTable |
1.3.6.1.4.1.3902.1082.40.10.2.1.3 |
MAC statistics table based on VLAN.
This table includes statistical information of numbers of unicast
MAC addresses for all the bridges on the device that have
forwarding and/or filtering information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ZxAnMacFwdVlanStatsEntry |
|
zxAnMacFwdVlanStatsEntry |
1.3.6.1.4.1.3902.1082.40.10.2.1.3.1 |
MAC statistics entry based on VLAN. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZxAnMacFwdVlanStatsEntry |
|
|
zxAnMacFwdVlanStatsVid |
1.3.6.1.4.1.3902.1082.40.10.2.1.3.1.1 |
The VLAN ID of MAC forwarding entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanId |
|
|
zxAnMacFwdVlanStatsMacs |
1.3.6.1.4.1.3902.1082.40.10.2.1.3.1.2 |
The number of MAC forwarding entries on the specified VLAN. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
zxAnMacFwdVlanConfTable |
1.3.6.1.4.1.3902.1082.40.10.2.1.4 |
A table containing MAC forwarding configuration based on VLAN.
Only supports C6XX, not supports C3XX. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ZxAnMacFwdVlanConfEntry |
|
zxAnMacFwdVlanConfEntry |
1.3.6.1.4.1.3902.1082.40.10.2.1.4.1 |
Entry for zxAnMacFwdVlanConfTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZxAnMacFwdVlanConfEntry |
|
|
zxAnMacFwdVlanConfVid |
1.3.6.1.4.1.3902.1082.40.10.2.1.4.1.1 |
The VLAN ID of MAC forwarding configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanId |
|
|
zxAnMacFwdVlanConfRowStatus |
1.3.6.1.4.1.3902.1082.40.10.2.1.4.1.50 |
The status of this conceptual row.
The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.
To create a row in this table, a manager must set this object to
createAndGo(4), and must comply with the multi-variables binding
rule described in zxAnMacFwdVlanConfEntry.
To delete a row in this table, a manager must set this object to
destroy(6).
To get this object, the agent always returns 1. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
zxAnMacFwdVlanMacTable |
1.3.6.1.4.1.3902.1082.40.10.2.1.5 |
A table containing MAC address based on VLAN.
Only supports C6XX, not supports C3XX. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ZxAnMacFwdVlanMacEntry |
|
zxAnMacFwdVlanMacEntry |
1.3.6.1.4.1.3902.1082.40.10.2.1.5.1 |
Entry for zxAnMacFwdVlanMacTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZxAnMacFwdVlanMacEntry |
|
|
zxAnMacFwdVlanMacAddr |
1.3.6.1.4.1.3902.1082.40.10.2.1.5.1.1 |
An unicast MAC address for which the VLAN has forwarding
and/or filtering information. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
zxAnMacFtpSnapCollectEnable |
1.3.6.1.4.1.3902.1082.40.10.2.3.2.1 |
Enables and disables MAC snapshot collecting function.
MAC snapshot collecting is a function that generates csv files
periodically containing snapshot information about unicast entries
for all the bridges on the device that have forwarding and/or
filtering information. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
zxAnMacFtpAccCollectEnable |
1.3.6.1.4.1.3902.1082.40.10.2.3.3.1 |
Enables and disables MAC accumulation collecting function.
MAC accumulation collecting is a function which is similar to MAC
snapshot collecting, except that the collected unicast entries are
not a snapshot but are accumulative between the two collecting
times. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
zxAnMacFtpAccCollectInterval |
1.3.6.1.4.1.3902.1082.40.10.2.3.3.3 |
The interval of periodical MAC accumulation collecting. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
2..1440 |
|
zxAnMacTableUtilOverThresh |
1.3.6.1.4.1.3902.1082.40.10.3.1.1 |
When the current utilization exceeds the threshold in a
monitoring period, then a notification is generated. In one
monitoring period the system may generate only one
notification at most. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
zxAnMacCompliance |
1.3.6.1.4.1.3902.1082.40.10.4.1.1 |
The compliance statement for entities which implement the
ZTE-AN-MAC-MIB.
only C3XX support,C6XX not support anymore. |
Status: current |
Access: read-write |
MODULE-COMPLIANCE |
|
|
|
zxAnMacTableGlobalObjectsGroup |
1.3.6.1.4.1.3902.1082.40.10.4.2.1 |
A collection of objects providing mac table global information. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
zxAnMacFwdTableGroup |
1.3.6.1.4.1.3902.1082.40.10.4.2.2 |
Information about unicast entry in mac forwarding table. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
zxAnMacFwdVlanStatsGroup |
1.3.6.1.4.1.3902.1082.40.10.4.2.3 |
Information about mac amounts of vlan. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
zxAnMacFwdVlanConfGroup |
1.3.6.1.4.1.3902.1082.40.10.4.2.4 |
Information about mac aging time of vlan. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
zxAnMacFwdVlanMacTableGroup |
1.3.6.1.4.1.3902.1082.40.10.4.2.5 |
Information about vlan mac table. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
zxAnMacFtpSnapCollectGlbGroup |
1.3.6.1.4.1.3902.1082.40.10.4.2.7 |
Information about mac ftp snapCollect. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
zxAnMacFtpAccCollectGlbGroup |
1.3.6.1.4.1.3902.1082.40.10.4.2.8 |
Information about mac ftp accCollect. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
zxAnMacTableUsageTrapsGroup |
1.3.6.1.4.1.3902.1082.40.10.4.2.50 |
The notifications which entities are required to implement. |
Status: current |
Access: read-write |
NOTIFICATION-GROUP |
|
|
|